City of Sedona, Arizona Wayfinding Program Prepared for Sedona Chamber of Commerce and Tourism Bureau Phase 2 Design Intent June 29, 2018
Lake Wellington Professional Centre Studio Suite 110-Y1 12161 Ken Adams Way Wellington, FL 33414 561.282.6205 axiacreative.com
CONTENTS
Program Overview
1.1
Program Elements
Family of Sign Types
2.1
Colors & Finishes
2.2
Drawing Devices
2.3
Graphics
City of
Fonts
3.1
3.2
Logos, Symbols & Arrows
Structural Details G Gateways
4.1
ID Identity
4.2
V
Vehicular Guides
4.7
P
Pedestrian Guides
4.15
R Regulatory
4.23
4.24
B
Street Banners
Placement Guidelines
5.1
PROGRAM OVERVIEW
The City of Sedona’s wayfinding program supports
of Commerce and Tourism Bureau and Axia. The
in these documents that may pose challenges for the
application onto signage. Access information to the
marketing initiatives managed by the Sedona
recipient agrees not to use or disclose this material,
successful fabrication and installation of the program.
project web page shall be provided upon request.
Chamber of Commerce and Tourism Bureau. In
or to make copies or use parts thereof, without the
addition to the primary goal of improving visitor
written consent of it’s owners.
Alternate materials, finishes and proposed structuring
The Sign Contractor shall provide electronic
may be considered as long as the design and
navigation through the City and to its destinations, the program will help establish aesthetic features that
This and its companion documents shall be used
performance of the system are not compromised
celebrate the Sedona experience and enhance the
by the Sign Contractor to prepare detailed shop
and it can be demonstrated that they are of equal
region as a class-one destination.
drawings that demonstrate qualified engineering
or better quality. All proposed alternates must be
and fabrication methodology for the successful
conveyed to the City/Chamber representative in
This document represents Axia Creative’s (Axia)
implementation of the wayfinding program. Detailed
writing prior to execution.
design intent. It is a communication device for
shop drawings with specification details shall
prospective bidders to understand the form and
be submitted to the authorized City/Chamber
Please note that visual accuracy of the colors and
function of elements that make up the system.
representative for review and approval prior to
finishes represented in this document may not be
proceeding with fabrication.
consistent with actual manufacturer’s swatches
companion documents that include the Message
The Sign Contractor is responsible for matching
technology. The Sign Contractor is required to
Schedule and the Location Plan. Together, with a
all colors, finishes and materials specified in this
appropriate actual color swatches and material
Request for Proposal (RFP,) they constitute the
document and is required to provide the City/
samples from the approved manufacturer.
Bid Documents.
Chamber representative samples for review and approval prior to full execution.
Templates and production-ready art will be available for download from the Sedona project web page.
From the Bid Documents, qualified bidders shall formulate and submit their bid to fabricate, deliver
The Sign Contractor shall be responsible for
Templates for each sign are formatted as Adobe (CC)
and install all items required to fulfill the contracted
verification of all dimensions, engineering, wind load,
Illustrator. The P1 Totems (directories) are formatted
scope of work as described herein.
foundation compliances and field conditions relative
in a single master Adobe (CC) InDesign file including
to the project prior to material order and component
fonts and associated assets. Each file is sized 100%
fabrication.
and includes bleeds. Reconstructed art or digitized
All design concepts, production art, written content and aesthetic format contained in this Design Intent
Chamber representative for approval prior to final graphic application. Production artwork, graphics, design concepts and formulas shall be used solely for the execution of the
and samples due to limitations of color printing
This Design Intent document is one of three
production layouts of all message panels to the City/
project represented in this document. They may not be used in the course of future projects, resold or reconstituted without the Owner’s written consent. All exposed welds and edges shall be ground smooth. All seams shall be filled and painted to match surrounding surface or as otherwise specified in the design intent drawings. All fasteners not meant for a visual aesthetic, to secure access panels or removable components shall be concealed. All exposed painted sign surfaces shall receive UV overlaminate or clearcoat with Anti-Graffiti properties.
All painted, screen printed, powder coated and/or vinyl surfaces shall be devoid of scratches, nicks,
versions from printed copies shall not be used at
tears, smudges or all blemishes due to the process of fabrication, transport and installation.
document are proprietary and are the joint legal
The City/Chamber representative shall be notified, in
any time. Only licensed font families or original
property of the City of Sedona, the Sedona Chamber
writing, of any contrary conditions or discrepancies
electronic files generated by Axia may be used for
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
1.1
PROGRAM ELEMENTS
CATHEDRAL ROCK TRAIL
Sedona Wetlands PreservePreserve Bird Sanctuary 7500 AZ-89A
INTERNATIONAL DARK SKY CITY
City of
W E LC O M E T O
Posse Grounds Park
The Hub
525 Posse Ground Road
J. Malmgren Skate Park
City of
EST. 1902
Community Center 2615 Melody Lane
278-494 Posse Ground Road
City of
City of
City of
ID9 - Primary Facility Identity
G1 - Primary Gateway
Red Rock State Park
ID10 - Secondary Facility Identity
City Hall
Red Rock Crossing
Police
Crescent Moon Ranch Recreation area
Sunset Park
V6 - Vehicular Guide 3 Messages 4 lines Max
V6X - Vehicular Guide 3 Messages 4 lines Max Extended Width
Client: Contact:
City of Sedona Jennifer Wesselhoff
City Hall 1 mi Police
1 mi
V7 - Vehicular Guide 2 Messages 2 lines Max
Project: Wayfinding Program Project No: SD1002 Family of Sign Types | Set 1
ID11 - Tertiary Facility Identity Multiple Line
ID12 - Tertiary Facility Identity Single Line
ID13 - Trail Head Identity
Broken Arrow Trailhead .5 mi Boynton & Fay Canyon Trailheads 2.5 mi
V8 - Vehicular Guide 1 Message 4 lines Max
V9 - Vehicular Guide 1 Message 4 lines Max Slow Speed Routes
Tennis Courts Ball Fields Sedona Hub Skate Park Bike Parks Pavilion
V10 - Vehicular Guide 6 Messages 6 lines Max Slow Speed Routes
Dog Park Pool
V11 - Vehicular Guide 4 Messages 4 lines Max Slow Speed Routes
Description: ADOT Submittal - Gateway Designer: Todd Mayfield Version: 1 Date: 12-29-17 City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
2.1
PROGRAM ELEMENTS
Main Street Main Street This Level
Elevator
To Parking
Main Street Accessible Access
Restrooms This Level Restrooms This Level
Elevator
Upper Level Shops More Shops Upper Level Elevator & Stairs
P1 - Totem
P2 - Pedestrian Guide 4 Messages
P3 - Pedestrian Guide 3 Messages
RESERVED PARKING Kindly Save This Space For Our Staff Thank You!
P4 - Pedestrian Guide 2 Messages
P5 - Pedestrian Guide 1 Message
P6 - Pedestrian Guide Restrooms
P7 - Pedestrian Guide Overhead Double sided
PUBLIC PARKING 3 Hour Limit Sunday 8am - 12pm Church Use Only P E R SE DO N A CI TY CO D 10-20-030 ( C)
PER SED ONA CITY COD 10- 20- 030 (B )
P8 - Pedestrian Guide Parking Lot Pole Mounted
P9 - Pedestrian Guide Parking Lot Hanging
Client: Contact:
R4 - Regulatory Reserved Parking
City of Sedona Jennifer Wesselhoff
R5 - Regulatory Public Parking
Set 2 Project: Wayfinding Program Project No: SD1002
Family of Sign Types | Set 2
B1 - Street Banner Uptown
B2 - Street Banner Gallery Row
Description: ADOT Submittal - Gateway Version: 1
B3 - Street Banner West Sedona
Designer: Date:
Todd Mayfield 12-29-17
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
2.2
PROGRAM ELEMENTS
Code
Name
Swatch
Specification
Description / Comments
Manufacturer
PA I N T & I N K P1
Burnt Red
C=0, M=90, Y=100, K=83
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P2
Dark Red
C=30, M=100, Y=100, K=35
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P3
Deep Red
C=19, M=100, Y=100, K=11
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P4
Orange
C=8, M=76, Y=100, K=0
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P5
Yellow
C=0, M=25, Y=85, K=0
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P6
Custard
C=0, M=7, Y=38, K=5
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. 3M™ UV-cured inkjet ink used for all reflective panels.
PPG/Matthews Paint 3M
P7
Black
C=0, M=0, Y=0, K=100
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces. Use powder coating process as specified
PPG/Matthews Paint Powder coating process TBD
P8
Metallic Grey
MP-18133 (or match)
Matthews Polyurethane Clear Coat Satin Paint used for back of signs and fastening supports. Use powder coating process as specified
PPG/Matthews Paint Powder coating process TBD
P9
Aluminum Patina
Aluma Black A14
Birtchwood Casey liquid patina for aluminum
Sculpt Nouveau
P10
White
C=0, M=0, Y=0, K=0
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces.
PPG/Matthews Paint
P11
Turquoise
C=88, M=0, Y=30, K=28
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces.
PPG/Matthews Paint
P12
Green
C=60, M=25, Y=100, K=0
Matthews Polyurethane Clear Coat Satin Paint used for non reflective surfaces.
PPG/Matthews Paint
Reflective Vinyl
4090T White
Diamond Grade™ DG³ Reflective Sheeting Used for reflective message panels
3M
Wood Stain
Driftwood Gray
Semi-Transparent Deck & Siding Stain with Cabot® Clear Wood Protector #2021
Cabot®
VINYL V1
S TA I N S1
Colors & Finishes
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
2.3
PROGRAM ELEMENTS
1
Front Elevation Scale: 1/2”=1’-0”
Indicates drawing number, drawing title and scale
Indicates revised portion of a drawing
5
Specification call-out
7
3
Indicates the page where an adjoining plan continues
Indicates center line Ø 9”
Indicates diameter 6
Specification with color and/or finish call-out
P3
1 4.6
1 4.6
Hidden object line (.25 pt. or .5 pt. thickness)
Indicates an area that has been blown up and detailed – Drawing number (top letter) – Page location (bottom number)
R=41/2
Indicates radius
Section or emphasis line (1 pt. thickness)
Indicates an alternate elevation or detail 90º
Indicates angle Grade or mounting surface line (2 pt. thickness)
Indicates an alternate point of view. Drawing number (top letter) – Page location (bottom number)
2 3.1
Visible object line (.25 pt. or .5 pt. thickness)
3"
Indicates dimension 3 3.2
3 3.3
Indicates section view. Drawing number (top letter). Page location (bottom number)
EQ
EQ
Scale Figures: Indicates equal measurement
A
Indicates Device face view
Men represent a 6’-0” figure. Women represent a 5’-6” figure.
Indicates drawing break
Drawing Devices
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
2.4
GRAPHICS
PT Sans Narrow Regular A aBbCcDdEeFf G gHhIi JjKkLl MmNnOoPp1234567890
1.
PT Sans Narrow Regular A aBbCcDdEeFf G gHhIi JjKk Ll MmNnOoPp1234567890
PT Sans Narrow Regular is used as general messaging on facility identity signs, parking-related signs or on signs where horizontal space is limited. It is not used on vehicular guides.
2.
PT Sans Narrow Bold is used to emphasize captions or key messages on facility identity signs, parking-related signs or on signs where horizontal space is limited. It is not used on vehicular guides.
3.
PT Sans Regular is used as general messaging on pedestrian guides
4.
PT Sans Bold is used to emphasize captions or key messages on pedestrian guides.
5. Highway Gothic Regular is used for messaging on all vehicular guides. All typography shall be set exactly as specified in these drawings. Reconstructed art or digitized versions from printed copies shall not be used. Only licensed font families or original electronic files generated by Axia may be used for application onto signage.
PT Sans Regular A aBbCcDdEeFf G gHhIi JjKkLl MmNnOoPp123 4567890 PT Sans Bold A aBbCcDdEeFf G gHhIi JjKk Ll MmNnOoPp1234567890
Highway Gothic Regular AaBbCcDdEeFfGgH hIiJjKkLlMmN nOoPp1234567890
Primary Gateway
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
3.1
GRAPHICS Production artwork files are available as vectorized pdfs which are scalable vector formats. They can be viewed with any pdf reader or opened with most industry standard design and publishing software.
City of Sedona Wordmark
Reconstructed art or digitized versions from printed copies shall not be used. Only original electronic files generated by Axia may be used for application onto signage.
City of Sedona Signature
Branded Banner for Vehicular Guides
ADOT Compliant Vehicular Guide Arrows
Pedestrian and Non-ADOT Compliant Arrows
Trail Head Symbol
Parking Symbol
Accessible Symbol
Post Office Symbol
Restroom Symbol
Crosswalk Symbol
History Walk Symbol
Elevator Symbol
Turnabout Arrow
Recycle Symbol
Airport Symbol
Library Symbol
Stairs Symbol
Lot 7 Symbol
Uptown Graphic
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
3.2
S T R U C T U R A L D E TA I L S
4
9
P7
12
S1
7"
2 1/2"
4"
TBD
1
Plan View
11
S1
15
P16
13
P7
Scale: 1/2”=1’-0”
1.
10” X 10” cedar post. Entire post treated. Post below grade is sealed.
2.
Support post anchored into concrete footer
3.
Bore (2) 2” holes into support post, 6” apart vertically, parallel with sign panel as required break-away device.
4.
2 1/2” X 2 1/2” aluminum angle fastened into posts and sign panel.
5.
Lag screws and lock washers
6.
1” thick high density foam board, finish smooth, prime and paint all exposed surfaces with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital cutting template is on the Sedona project web page. Access link and password available upon request.
7.
1/2” thick high density foam board, finish smooth, prime and paint all exposed surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
8.
1/4” thick aluminum letters. Acid-wash to remove oils. All exposed edges and surfaces shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
9.
Reuse non-organic, structural fill excavated from footing excavations, compact with either jumping jack of plate compactor.
9 1/2"
1 4.1
9
1/2"
7"
6'-0" 4"
8'-6"
6
P2
8
P10
7
P3
3 1/2"
1
1/4"
S1 15
4
P7
2"
P9
1"
15
P9
11
S1
10. 3000 PSI concrete base. Fabricator to engineer 11. Treated 2” X 4” cedar frame 9'-0"
EST. 1902
P5 P5 1'-10"
16
3 4.1 14
P8
15. 1/4” thick aluminum base plate. Acid-wash to remove oils. All exposed edges and surfaces shall be painted with a liquid patina and coated with a satin UV clear coat in compliance with Sculpt Nouveau’s recommended standard.
1" 1/2"
P7
12
S1
5
2 3
13. 3/4”Ø PVC collar/spacer. 14. 4” lag bolt, bolts to aluminum base plate
7'-0"
17
3'-0"
8'-0"
4'-6"
INTERNATIONAL DARK SKY CITY 6
12. Treated 4” X 7” cedar block, support for cedar frame.
3
P7
16. 1/8” thick aluminum letters. Acid-wash to remove oils. All exposed edges and surfaces shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard. 17. Frisketed letters, painted with with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
TBD
9 10
2
Front Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
Primary Gateway | G1
4
Rear Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.1
S T R U C T U R A L D E TA I L S 2 1/2"
4
P7
3" 2"
6"
2 1/2"
3"
1
9
Plan View
6"
2'-5"
1 4.2
7
1
3 4.2
P10
Support post anchored into concrete footer
3.
Bore (2) 2” holes into support post, 6” apart vertically, parallel with sign panel as required break-away device.
4.
2 1/2” X 2 1/2” aluminum angle fastened into posts and sign panel.
5.
Lag screws and lock washers
6.
2” thick high density foam board. Front face sand blasted 1/4” deep, primed, painted with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital cutting template is on the Sedona project web page. Access link and password available upon request.
7.
Non-sand blasted surface painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard
4
P7
6
P1
S1
8.
Reuse non-organic, structural fill excavated from footing excavations, compact with either jumping jack of plate compactor.
9.
3000 PSI concrete base from Sonotube form. Fabricator to engineer
4'-0"
6'-7"
6'-2"
7500 AZ-89A
3
City of
P5
2.
10. Screen printed or frisketed letters, screen to match, or paint with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Sedona Wetlands Preserve Bird Sanctuary
4'-5"
7'-0"
6'-7"
7'-10"
10
6” X 6” cedar post. Entire post treated. Post below grade is sealed.
Scale: 1/2”=1’-0” 8'-2"
1'-7"
1.
1'-4"
2
2 3
7
P3
7
P2
6
P1
5
P7
3'-0"
8 9
2
Front Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
Primary Facility Identity | ID9
4
Rear Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.2
S T R U C T U R A L D E TA I L S 4
P7
2 1/2"
6"
2 1/2"
3"
2"
9
1
Plan View
1.
6” X 6” cedar post. Entire post treated. Post below grade is sealed.
2.
Support post anchored into concrete footer
3.
Bore (2) 2” holes into support post, 6” apart vertically, parallel with sign panel as required break-away device.
4.
2 1/2” X 2 1/2” aluminum angle fastened into posts and sign panel.
5.
Lag screws and lock washers
6.
2” thick high density foam board. Front face sand blasted 1/4” deep, primed, painted with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital cutting template is on the Sedona project web page. Access link and password available upon request.
7.
Non-sand blasted surface painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard
8.
Reuse non-organic, structural fill excavated from footing excavations, compact with either jumping jack of plate compactor.
9.
3000 PSI concrete base from Sonotube form. Fabricator to engineer
Scale: 1/2”=1’-0”
1 4.3 6"
6'-9"
1
7
3 4.3
P10
P16 4
P7
6
P1
5
P7
10. Screen printed or frisketed letters, screen to match, or paint with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
W E LC O M E T O
525 Posse Ground Road
P5
3'-0"
6'-5"
3'-8"
6'-0"
7'-5"
10
Posse Grounds Park City of
1'-4"
2 3
7
P3
7
P2
6
P1
3'-0"
8 9
2
Front Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
Secondary Facility Identity | ID10
4
Rear Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.3
S T R U C T U R A L D E TA I L S 4
11
P7
11
S1
S1
3"
2 1/2"
2" 3'-0"
9
Plan View
1
1.
6” X 6” cedar post. Entire post treated. Post below grade is sealed.
2.
Support post anchored into concrete footer
3.
Bore (2) 2” holes into support post, 6” apart vertically, parallel with sign panel as required break-away device.
4.
2 1/2” X 2 1/2” aluminum angle fastened into posts and sign panel.
5.
Lag screws and lock washers
6.
2” thick high density foam board. Front face sand blasted 1/4” deep, primed, painted with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital cutting template is on the Sedona project web page. Access link and password available upon request.
7.
Non-sand blasted surface painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard
8.
Reuse non-organic, structural fill excavated from footing excavations, compact with either jumping jack of plate compactor.
9.
3000 PSI concrete base from Sonotube form. Fabricator to engineer
Scale: 1/2”=1’-0”
1 4.4
4
6"
5'-5"
Rear Elevation - Side B Scale: 1/2”=1’-0”
1 7
3 4.4
P10
S1 4
P7
6
P1
5
P7
10. Screen printed or frisketed letters, screen to match, or paint with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard. 11. 3” X 3” cedar support. Bolted and glued in place as an additional support when sign is double sided. Cedar support treated.
The Hub
P5
City of
1'-2"
2 3
3'-0"
278-494 Posse Ground Road
6'-5"
10
5'-9"
3'-4"
J. Malmgren Skate Park
7
P3
7
P2
6
P1
3'-0"
8 9
2
Front Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
Tertiary Facility Identity | Multiple Line | ID11
5
Rear Elevation - Side A Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.4
S T R U C T U R A L D E TA I L S 4
11
P7
S1
11
S1
3"
2 1/2"
2"
9 2'-6"
Plan View
1
1.
6” X 6” cedar post. Entire post treated. Post below grade is sealed.
2.
Support post anchored into concrete footer
3.
Bore (2) 2” holes into support post, 6” apart vertically, parallel with sign panel as required break-away device.
4.
2 1/2” X 2 1/2” aluminum angle fastened into posts and sign panel.
5.
Lag screws and lock washers
6.
2” thick high density foam board. Front face sand blasted 1/4” deep, primed, painted with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital cutting template is on the Sedona project web page. Access link and password available upon request.
7.
Non-sand blasted surface painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard
8.
Reuse non-organic, structural fill excavated from footing excavations, compact with either jumping jack of plate compactor.
9.
3000 PSI concrete base from Sonotube form. Fabricator to engineer
Scale: 1/2”=1’-0”
1 4.5
4
6"
5'-5"
Rear Elevation - Side B Scale: 1/2”=1’-0”
1 3 4.5
7
10. Screen printed or frisketed letters, screen to match, or paint with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
S1 4
P10
P7
6
P5
City of
1'-4"
2 3
7
P3
7
P2
6
P1
11. 3” X 3” cedar support. Bolted and glued in place as an additional support when sign is double sided. Cedar support treated.
2'-6"
10
5'-11"
2'-9"
2615 Melody Lane
5'-3"
Community Center
P1
5
P7
3'-0"
8 9
2
Front Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
Tertiary Facility Identity | Single Line | ID12
5
Rear Elevation - Side A Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.5
S T R U C T U R A L D E TA I L S
2'-0"
1'-6" 3"
1
CATHEDRAL ROCK TRAIL
1'-9"
3'-0"
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
3.
Maintain 5’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where pedestrian access may result in injury or where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
Opposing Z-cleats. Female cleat fastened to support post, male cleat fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
City of
3 2
P7
P8
5
P8
4
P7
7'-10"
3 4.6
1
5'-0"
1
Front Elevation Scale: 1/2”=1’-0”
2
Rear Elevation Scale: 1/2”=1’-0”
Trail Head Identity | ID13
3
Side Elevation Scale: 1/2”=1’-0” 1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.6
S T R U C T U R A L D E TA I L S
8'-0"
8'-8"
9
3
P7
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Tight seam at optimum location to preserve visual balance and use of material cut from standard aluminum panel sizes.
3.
Aluminum z-clip and flatbar
4.
Thru-bolts, lock washers and nuts
5.
ADOT approved break-away device
6.
Extruded aluminum z-bar brackets fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
7.
5.56” round steel pole. Fabricator to engineer wall thickness.
8.
Maintain 7’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities
9.
Aluminum cap, welded and ground smooth
3" 5 1/2"
P8
8" 7"
2
2'-5"
Red Rock State Park
1'-11"
6'-5"
Red Rock Crossing 1'-11"
4'-0"
Crescent Moon Ranch Recreation area
1
8
1
P8
6
P8
4 7
12'-7"
3 4.7
P7
P7 7'-0"
2 4.11
1
5
4'-0"
P7
Front Elevation
2
Scale: 1/2”=1’-0”
Vehicular Guide | V6X
Rear Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.7
S T R U C T U R A L D E TA I L S
7'-3"
7'-10"
9
3
P7
3" 5 1/2"
P8
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Tight seam at optimum location to preserve visual balance and use of material cut from standard aluminum panel sizes.
3.
Aluminum z-clip and flatbar
4.
Thru-bolts, lock washers and nuts
5.
ADOT approved break-away device
6.
Extruded aluminum z-bar brackets fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
7.
5.56” round steel pole. Fabricator to engineer wall thickness.
8.
Maintain 7’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities
9.
Aluminum cap, welded and ground smooth
8"
1.
7"
2
2'-4"
City Hall
1'-8"
5'-10"
Police 3'-6" 1'-8"
Sunset Park
1
8
1
P8
6
P8
4 P7
5
P7
P7
7'-0"
7
12'-0"
3 4.8
2 4.11
1
Front Elevation Scale: 1/2”=1’-0”
4'-0"
2
Vehicular Guide | V6
Rear Elevation Scale: 1/2”=1’-0”
3
Side Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.8
S T R U C T U R A L D E TA I L S
7'-10"
7'-3"
2
7" 2'-0"
Library 3 4.9 1
1
Front Elevation Scale: 1/2”=1’-0”
7
P7
5
P7
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Aluminum cap, welded and ground smooth
3.
Maintain 7’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
ADOT approved break-away device
6.
Extruded aluminum z-bar brackets fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
1
P8
6
P8
7.
5.56” round steel pole. Fabricator to engineer wall thickness.
4
P7
12'-0"
2 4.11
3
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
3" 5 1/2"
P7
8"
4'-0"
Post Office
1.
4'-0"
2
Rear Elevation Scale: 1/2”=1’-0”
Vehicular Guide | V7
3
Side Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.9
S T R U C T U R A L D E TA I L S 2
P7
3'-7"
4'-3"
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Aluminum cap, welded and ground smooth
3.
Maintain 7’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
ADOT approved break-away device
6.
Extruded aluminum z-bar brackets fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
7.
5.56” round steel pole. Fabricator to engineer wall thickness.
3" 5 1/2"
8" 7"
1
3'-4"
5'-10"
Broken Arrow Trailhead .5 mi
3
P7
5
P7
6
P8
4
P7
7'-0"
7
P8
12'-0"
3 4.10
1
2 4.11
1
Front Elevation Scale: 1/2”=1’-0”
2
Rear Elevation Scale: 1/2”=1’-0”
Vehicular Guide | V8
3
Side Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.10
S T R U C T U R A L D E TA I L S
4
2 4.11
3 1 2
2
3
3 4
5
1.
Base plate
2.
Aluminum sleeve
3.
Sleeve bolt
4.
Sign support post
5.
High strength base bolt
6.
3000 PSI concrete base. Sonotube formed. Fabricator to engineer
7.
Grade: Reuse non-organic, structural fill excavated from sign footing grade. Compact with mechanical compactor.
8.
Rebar reinforcement
9.
Aluminum stub
5
1 4"
2
Detail Scale: 3”=1’-0”
2"
9
6 TBD
7 8
1'-6"
1
Detail Scale: 3”=1’-0” 1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.11
S T R U C T U R A L D E TA I L S
3'-3"
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
3.
Maintain 5’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where pedestrian access may result in injury or where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
Opposing Z-cleats. Female cleat fastened to support post, male cleat fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
2'-6"
6"
1
2'-11"
4'-4"
Boynton & Fay Canyon Trailheads 2.5 mi
3 2
P7
5'-0"
1'-5"
1
Front Elevation Scale: 1/2”=1’-0”
P8
5
P8
4
P7
9'-0"
3 4.12
1
1'-5"
2
Rear Elevation Scale: 1/2”=1’-0”
Vehicular Guide | V9
3
Side Elevation Scale: 1/2”=1’-0” 1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.12
S T R U C T U R A L D E TA I L S
3'-3"
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
3.
Maintain 5’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where pedestrian access may result in injury or where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
Opposing Z-cleats. Female cleat fastened to support post, male cleat fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
2'-6"
6"
1
Tennis Courts
2'-11"
4'-4"
Ball Fields Sedona Hub Skate Park Bike Parks Pavilion
3 2
P7
5'-0"
1'-5"
1
Front Elevation Scale: 1/2”=1’-0”
P8
5
P8
4
P7
9'-0"
3 4.13
1
1'-5"
2
Rear Elevation Scale: 1/2”=1’-0”
Vehicular Guide | V10
3
Side Elevation Scale: 1/2”=1’-0” 1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.13
S T R U C T U R A L D E TA I L S
3'-3"
6" 2'-11"
3'-4"
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
3.
Maintain 5’-0” from street grade to bottom of vehicular guide signs. Allow ample height in regions where pedestrian access may result in injury or where maintenance crews require exceptional clearance. Verify compliance requirements with the governing transportation authorities.
4.
Thru-bolts, lock washers and nuts
5.
Opposing Z-cleats. Female cleat fastened to support post, male cleat fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
3 2
P7
5'-0"
1'-5"
1
P8
5
P8
4
P7
7'-10"
3 4.14
Scale: 1/2”=1’-0”
1
Pool
Front Elevation
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto 3M™ Diamond Grade DG³ Reflective Sheeting applied to the prepared aluminum panel. Overlay with 3M™ ElectroCut™ 1170C Film.
2'-6"
Dog Park
1
1.
1'-5"
2
Rear Elevation Scale: 1/2”=1’-0”
Vehicular Guide | V11
3
Side Elevation Scale: 1/2”=1’-0” 1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.14
S T R U C T U R A L D E TA I L S
4 1/2"
1'-0"
5
1
1
4"
4 4.15 UPTOWN
1.
11
8
P8
9
P8
4 1/2"
4
4"
1/8” thick aluminum panel. Face and edges finished smooth and covered with graphic embedded powder coat (Direct Embed Coating Systems, LLC). Graphics extend to all top edges. Return edges, back of sign and welded components shall be powder coated with black.
Slightly ease corners to reduce sharpness.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
4ӯ aluminum post. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and covered with graphic embedded powder coat (Direct Embed Coating Systems, LLC). Fastens to aluminum base panel from behind. Slips over smaller post embedded into footer.
3.
4 1/2” x 4 1/2” square aluminum post. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and covered with graphic embedded powder coat (Direct Embed Coating Systems, LLC). Slips over and fastens to 4”Ø aluminum post with machine screws. Chemically bond to map panels with Lord’s Adhesive.
4.
Tamper proof machine screws, countersunk (flush) into square post. Paint with Matthews Polyurethane Clear Coat Satin to match adjoining surface. Anchors sign panel assembly to square post. Fastener hole pre-drilled prior to application of paint or powder coating. Secures panel assembly to post.
1"
MAP
You Are Here
I TA
L BU TT
E RD
IR
CL
E D R
SU
NR
IS
E
AV
E
SU
PE AC H LN
2
C
NORBIE RD
CA P
NS ET LN
DR EW
ST
AT
E
RO
UT
E
89
A
MO
UN
TA
IN
VI
CEDAR ST
JORDAN RD
SMITH RD
WILSON RD
VAN DEREN ST
N
1"
S C H N E B LY R D
AR
A P PL E AV E
4'-8"
RO
T
BA
YO
RN
RO
LN
BL
E
2 4.15
RD
RO
BL
E R D
AR
ARR
OY
O
MES QU ITE AVE
AM AR A LN
SMITH RD
WILSON RD
VAN DEREN ST
2
89A TE
ROU TE N S TA
LN LE
D
3
RV
PA
O
RK
A
R
K
C
R
E
E
K
LI
TT
8"
6'-8"
1'-0"
4'-9"
FO REST RD
LY
LN
EB
OW
SC
LL
BREW
ER RD
HWY
179
WA
HN
AR
RD
RAN
CHO
SED
ONA
6'-2"
BE
West Sedona Gallery Row
6.
3000 PSI concrete footer. Fabricator to engineer.
7.
3/8” Ø threaded rod, epoxied into concrete footer.
8.
3/8” thick aluminum flange, welded to round post and powder coated
9.
Nut, washer and lock washer securing base plate to all-thread rod epoxied into concrete sonotube footer. Leveling nuts placed below base plate.
LY
RD
History Walk R
EB
GE
RD
Visitor Center
HN
AN
Welded aluminum cap, finished to match square post.
RD
H
LY
Y 1 79
PO
RT
A
L
LN
EB
SC
BREWER RD
Gallery Row HW
N
SC
R
5.
Upper Parking Elevator
1
OW R D
Crosswalk
History Walk
Parking Lot
Accessible Path
Post Office
Elevator
Restrooms
Stairs
AB
BO
TT
RD
CHN
HWY
179
OA K C R E E K
SEDONA HILL DR
PRO
HI
G
A HL
ND
RD
4
RO YA L L G EN
LN O
T
SI
EN
NA
LN
2
P12
4
COP
PER
CLI
FFS
DR
Y
AR
8"
RO
MB
6"
AR
SO
2'-0"
3
Section
10. Fill grout, covers gap between plate and concrete sonotube footer.
Scale: 3”=1’-0”
11. For single sided signs that have exposed back sides, finish and paint all exposed surfaces.
3
P11 1'-6"
5 4.15
9
P8
8
P8
7 1/4" 3/4"
10 6
3'-0" (verify) 1'-0" (Verify)
1
Front Elevation Scale: 1”=1’-0”
2
Side Elevation Scale: 1”=1’-0”
3
Side Elevation Scale: 1”=1’-0”
Totem | P1 - New Post | Elevations
5
Detail Scale: 3”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.15
1'-0"
S T R U C T U R A L D E TA I L S 1. 2"
3
2"
5
Slightly ease corners to reduce sharpness.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Existing pole, diameter varies
3.
13 gauge aluminum U-channel. Bore pass-through slots for adjustable strap. Weld to reverse side of back panel. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and powder coated with black.
4.
Slot for adjustable strapping pre-drilled prior to application of paint or powder coating.
5.
Stainless steel adjustable strapping. Properly treat surface to receive painted finish. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. Position screw clamp on side of pole with least visible exposure.
1
4"
4"
2
1 3 4.16 UPTOWN
1
MAP
You Are Here
I TA
L BU T
TE R D
IR
C
NORBIE RD
CA P
CL
E D R
SU
NR
IS
E
AV
E
SU
PE AC H LN
NS ET LN
DR
S C H N E B LY R D
EW
ST
AT
E
RO
89
A
VI
CEDAR ST
JORDAN RD
IN
RO
T
BA
YO
RN
RO
3
LN
BL
E
BL
RO
ARR
OY
O
MES QU ITE AVE
P7
2 4.16
RD
E R D
AR
3'-9"
AR
A P PL E AV E
4'-8"
5
TA UN
MO
SMITH RD
WILSON RD
VAN DEREN ST
N
E UT
1/8” thick aluminum panel. Face and edges finished smooth and covered with graphic embedded powder coat (Direct Embed Coating Systems, LLC). Graphics extend to all top edges. Return edges, back of sign and welded components shall be powder coated with black.
AM AR A LN
SMITH RD
WILSON RD
VAN DEREN ST
3
Section Scale: 3”=1’-0”
D
4
CHO
SED
ONA
RV
PA
O
RK
A
R
K
C
R
E
E
K
LI
TT
LE
LN
N S TA
TE
ROU
TE
89A
FO REST RD
4 4.16
RAN
RD
LY EB
LN
SC
OW
Gallery Row
BREW
ER RD
HWY
LL
HN
WA
179
AR
6'-8"
BE
West Sedona
LY
RD
History Walk R
EB
GE
RD
Visitor Center
HN
AN
RD
H
LY
Y 1 79
PO
RT
A
L
LN
EB
SC
BREWER RD
Gallery Row HW
N
SC
R
4"
Upper Parking Elevator
OA K C R E E K
SEDONA HILL DR
179
5
HWY
CHN
OW R D
Crosswalk
History Walk
Parking Lot
Accessible Path
Post Office
Elevator
Restrooms
Stairs
AB
BO
TT
RD
PRO
HI
GH
LA
ND
RD
RO
2
YA L L G EN
LN AR RO
O
MB
AR
T
SI
EN
NA
LN
COP
PER
CLI
FFS
DR
Y
SO
2 3
2'-0"
4
1
Front Elevation Scale: 1”=1’-0”
2
Side Elevation Scale: 1”=1’-0”
Totem | P1 - Existing Pole | Elevations
Detail Scale: NS
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.16
S T R U C T U R A L D E TA I L S 3
P2
1.
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Existing pole, verify size and condition in field.
3.
2” X 2” aluminum angle. All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Chemically bond to message panel with Lord’s adhesive. Bolt into pole.
4.
Machine screws and lock washers.
5.
Opposing Z-cleats. Female cleat fastened to support post, male cleat fill weld to back of sign panel. Paint all exposed edges and surfaces with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Plan View
1
Scale: 1/2”=1’-0” 1 4.17 1'-7" Verify in Field
2"
2"
2 2"
Main Street This Level
Restrooms This Level
1
P2
1
6'-4"
3 4.17
Upper Level Shops
3
P2
4
P2
4 4.17
Elevator & Stairs
2"
9"
2
Front Elevation Scale: 1”=1’-0”
3
Side Elevation Scale: 1”=1’-0”
Pedestrian Guide | P2
4
Rear Elevation Scale: 1”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.17
S T R U C T U R A L D E TA I L S 2" TBD
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Existing pole, verify size and condition in field.
3.
2” X 2” aluminum angle. All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Chemically bond to message panel with Lord’s adhesive. Bolt into pole bracket.
4.
Machine screws and lock washers.
5.
Thru-bolts, lock washers and nuts
6.
Aluminum pole brackets, bolt into aluminum angle and support pole. All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semigloss UV clear coat in compliance with Matthews Paint’s recommended standard.
7.
Reinforce and fill panel joins.
TBD
2"
6
1.
3
7
1
Plan View Scale: 1/2”=1’-0” 1 4.18 1'-7" Verify in Field
2"
6
2
P2
2"
5
Elevator
1
P2
4
P2
P2
1 5'-6"
Restrooms This Level
3 4.18
4 4.18
More Shops Upper Level
2"
1'-7"
2
Front Elevation Scale: 1”=1’-0”
3
Side Elevation Scale: 1”=1’-0”
Pedestrian Guide | P3
4
Rear Elevation Scale: 1”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.18
S T R U C T U R A L D E TA I L S 6
2"
5
1.
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
3.
Existing pole, diameter varies
4.
Flat head fastener passes through sign panel (flush) and fasteners into perforated tubing. Position bolt head between graphic elements and paint to match adjoining background.
5.
13 gauge aluminum U-channel. Bore pass-through slots for adjustable strap. Weld to reverse side of back panel. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and powder coated with black.
6 1
6"
1'-4"
5
3
4 4
1'-4"
4
Section Detail
2'-2"
1
P8
4 4.19
Main Street
2'-4"
Accessible Access
Scale: 1”=1’-0”
1'-4"
1
1'-4"
5
Scale: 1”=1’-0”
Detail
6. 2"
1
P8 2
P7
2
1
P7
3"
1
1'-6"
2'-2"
2
1B 4.19
P7
2B 4.19
Stainless steel adjustable strapping. Properly treat surface to receive painted finish. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. Position screw clamp on side of pole with least visible exposure.
P8 5 4.19
3B 4.19
3
5
5'-0"
1A - Front Elevation
1
1B - Rear Elevation
P4 - New Pole Scale: 1/2”=1’-0”
2A - Front Elevation
2
2B - Rear Elevation
P6 - New Pole Scale: 1/2”=1’-0”
Pedestrian Guides | P4 and P6
3A - Front Elevation
3
3B - Side Elevation
P6 - Existing Pole Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.19
S T R U C T U R A L D E TA I L S 1.
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
1/8” thick, 1” wide aluminum flat bar chemically weld to rear side of message panel with Lord’s adhesive. Weld threaded rod at both ends.
3.
1/8” thick, 1” wide aluminum flat bar chemically fastened to threaded rods with lock washer and nut. Sandwiches horizontal railing elements. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin to match railing color.
4.
Flat head fastener passes through sign panel (flush) and fasteners into perforated tubing. Position bolt head between graphic elements and paint to match adjoining background.
5.
13 gauge aluminum U-channel. Bore pass-through slots for adjustable strap. Weld to reverse side of back panel. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and powder coated with black.
4
3 1
2
P7
1
5
EQ
1'-7"
Scale: N/S
Verify in Field
EQ
1'-11"
Elevator
4
Isometric Detail
2 4.20
3
Front Elevation Scale: 1/2”=1’-0”
Stainless steel adjustable strapping. Properly treat surface to receive painted finish. All exposed surfaces finished smooth and painted with Matthews Polyurethane Clear Coat Satin. Position screw clamp on side of pole with least visible exposure.
7.
Paint back of sign to match railing color.
3 4.20
1
1
6.
7
2
Side Elevation Scale: 1/2”=1’-0”
Pedestrian Guide | P5
3
Rear Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.20
S T R U C T U R A L D E TA I L S
6
1.
1/4”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Existing steel ceiling bracket
3.
1/8” thick, (verify existing ceiling bracket thickness and match) panel spacer. Chemically bond with Lord’s adhesive.
4.
Pass-through hole in ceiling bracket and P7.2 panel. Receives flat head fastener.
5.
Pass-through hole in P7.2 panel. Receives flat head fastener.
5.
13 gauge aluminum U-channel. Bore pass-through slots for adjustable strap. Weld to reverse side of back panel. Acid-wash aluminum surface to remove oils. Face and all exposed surfaces finished smooth and powder coated with black.
6.
Existing sloped ceiling.
7.
Threaded hole (half way through back of P7.1 panel, receives flat head fastener.
8.
Flat head fastener passes through P7.2 sign panel (flush) and fastens into back of P7.1 sign panel. Position bolt head between graphic elements and paint to match adjoining background.
8 2
4 3
5
1
P7.2 Panel - Back Scale: 1/2”=1’-0”
2
Side Elevation Scale: 1/2”=1’-0”
3
P7.1 Panel - Back
7
Scale: 1/2”=1’-0”
5'-3"
1'-0"
Main Street 4
P7.1 Panel - Front Scale: 1/2”=1’-0”
To Parking
2 4.21
5
Pedestrian Guides | P7
P7.2 Panel - Front
1
Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.21
S T R U C T U R A L D E TA I L S 1.
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Lock washer and nut
4 4.22
3.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
8
4.
Flat head fastener passes through sign panel (flush) and fasteners into perforated tubing. Position bolt head between graphic elements and paint to match adjoining background.
5.
1/4” thick, 2” wide flat bracket welded to underside of existing railing. Bracket spans the full height of the sign panels. Sign panels fasten through it and to each other.
6.
Existing Railing
7.
Threaded hole (half way through back of P7.1 panel, receives flat head fastener.
8.
Flat head fastener passes through P9.2 sign panel (flush) and fastens into back of P9.1 sign panel. Position bolt head between graphic elements and paint to match adjoining background.
5 4
1'-4"
2
1
1
P7
P7
P8
1'-4"
2'-2"
2 4.22
1
3
6
P7 1 2'-2"
5
3"
P9.2 South Elevation Scale: 1/2”=1’-0”
6
8
5'-3"
2"
4 1'-0"
5'-0"
3B 4.19
1
5
6
1A - Front Elevation
1
P7 7
1B - Rear Elevation
P8.1 New Pole Scale: 1/2”=1’-0”
2
P8.2 Existing Pole Scale: 1/2”=1’-0”
3
Pedestrian Guides | P8 and P9
P9.1 North Elevation Scale: 1/2”=1’-0”
4
P9.1 Elevation Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.22
S T R U C T U R A L D E TA I L S
4
1'-4"
2
1
1
P8
Kindly Save This Space For Our Staff Thank You!
2
1
PUBLIC PARKING
2'-5"
2'-2"
RESERVED PARKING
4
1'-4"
P7
P7
1
P8
3
P7
1.
1/8”thick aluminum panel. Acid-wash aluminum sheet to remove oils. Front side receives digitally printed graphic faces with 3M™ Piezo Injet Series 8900UV Ink onto aluminum panel painted white. Overlay with 3M™ ElectroCut™ 1170C Film.
All exposed edges and surfaces that do not receive graphic imagery shall be painted with Matthews Polyurethane Satin Paint and coated with a semi-gloss UV clear coat in compliance with Matthews Paint’s recommended standard.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Lock washer and nut
3.
2 1/2” square powder coated Telespar square perforated steel tubing with break-away base.
4.
Flat head fastener passes through sign panel (flush) and fasteners into perforated tubing. Position bolt head between graphic elements and paint to match adjoining background.
3 Hour Limit Sunday 8am - 12pm Church Use Only P E R S E DO N A C I TY CO DE 1 0 - 20 - 03 0 ( C )
P E R S E D O N A C I TY CO D E 1 0 - 2 0 - 0 3 0 ( B )
3
P7
1B 4.23
1A - Front Elevation
1
2B 4.23
1B - Rear Elevation
2A - Front Elevation
R4.1 New Pole
2
Scale: 1/2”=1’-0”
Regulatory | R4 and R5
2B - Rear Elevation
R5.1 New Pole Scale: 1/2”=1’-0”
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.23
S T R U C T U R A L D E TA I L S 1.
Digitally print onto 16 oz double-faced vinyl. Apply UV coating.
Full size digital file with embedded color profile is on the Sedona project web page. Access link and password available upon request.
2.
Mounting straps and pole brackets by others
3.
Existing light pole
3
2'-0"
1 4.25
2'-0"
2'-0"
2
1
4'-0"
4'-0"
4'-0" CITY OF
CITY OF
CITY OF
FORT SMITH
FORT SMITH
FORT SMITH
Elevation - Banner - B1 Scale: 1/2”=1’-0”
7'-0"
7'-0"
7'-0"
1
2
Elevation - Banner - B2 Scale: 1/2”=1’-0”
District Banners | B1, B2 and B3
3
Elevation - Banner - B3
1
/
/
Scale: 1/2”=1’-0”
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.24
S T R U C T U R A L D E TA I L S 1.
Pole pocket for 1” Ø bracket arm
2.
Double stitch hem
3.
Digitally print onto 16 oz double-faced vinyl with opaque layer between faces. Apply UV coating.
2'-0"
1 3"
2
4'-0"
2 4.25
3
1
1
Detail - Banner - B1 Scale: 1”=1’-0”
2
Side View Scale: 1”=1’-0”
District Banners | B1, B2 and B3 | Detail
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
4.25
PLACEMENT GUIDELINES A
A
A
Specific sign plans are attributed to each sign type in the message schedule. A and B measurements are also indicated in the message schedule as they pertain to each sign type.
Sign Plan 1
Sign Plan 3
A
A
A
B
A
Sign Plan 2
Sign Plan 4
Sign Plan 5
Plan Orientation
Sign Plan 6
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
5.1
PLACEMENT GUIDELINES 1. The inside edge of the sign panel must not invade the corresponding highway right-of-way or established setbacks. Fabricator shall verify right-of-way/ setback demarcations for all sign locations. 2. Sign panel 3. Maintain 7’-0” from street grade to bottom of vehicular guide signs. Do not block critical sight lines required for safe vehicle navigation. Verify compliance requirements ADOT.
1
4. Street/Hwy shoulder (beginning of regulated right-of-way or set-back)
1
5. Grade 6. Concrete footer 7. Concrete footer must never exceed more than 4” above grade to comply with regulated break-away systems. Multiple poles may be staggered in length to meet slope.
2
8. Variable height from grade
2
3
8
3
9. Center median or street curbing
6 7
6 5
4
1
9
7
Shoulder Alignment
2
Scale: NS
Shoulder & Median Alignment
Median Alignment Scale: NS
1
/
/
2
/
/
3
/
/
4
/
/
City of Sedona, Arizona Wayfinding Program | Design Intent | June 29, 2018
5.2