Skin care new ingredients. - Free Online Library It can be also as a carrier or delivery system for skin care products with benefit of "long-lasting" effect.
Natrulon RC-5ODG
INCI name: L-carnitine and decaglycerol
Use levels: 2-10%
Applications: exfoliation and reparative creams and lotions, moisturizing creams and lotions and skin lightening products
Comments: This new amino acid-like material based on a patented biotransformation process offers superior reparative and exfoliating properties and brings to formulators a novel skin care approach. It gives an exceptionally translucent look on the skin coupled with excellent adhesion and superior soft focus effects.
* International Specialty Products
Wayne, NJ
Tel: (800) 622-4423
Fax: (973) 628-4001
E-mail: info@ispcorp.com
Website: www.ispcorp.com
ISP Colorflow 100
INCI name: cholesteryl oleyl carbonate (and) cholesteryl chloride (and) cholesteryl nonanoate (and) butylated hydroxytoluene
Use levels: up to 100%
Applications: lipsticks and eye gels
Comments: Colorflow ingredients produce an exciting range of visual effects via an array of optimized cholesteric liquid crystals.
Ceraphyl SLK
INCI name: isodecyl neopentanoate
Use levels: 2-20%
Applications: moisturizers, creams and lotions, daily wear sun protection and shaving products
Comments: Ceraphyl SLK is a light feeling, non-greasy ester with a silky touch on the skin. Especially compatible with avobenzone (butyl methoxydibenzoylmethane) in sunscreens, unlike formaldehyde donors.
Neolone MxP
INCI name: phenoxyethanol and methylparaben and propylparaben and methylisothiazolinone
Use levels: .30-.60%
Applications: broad-spectrum preservative
Comments: Approved for leave-on and rinse-off applications. Approved for leave on and rinse off in Japan. Stability over awide range of pH (2-12).
Ultrabee-25 Silicone
INCI name: bis-hydroxyethoxypropyl dimethicone beeswax Use levels: 1.0-5.0%
Applications: skin care products including creams, lotions, moisturizing bath products and color cosmetics
Comments: A novel silicone-beeswax hybrid that adds body to
emulsions and creates a rich, luxurious feel, even at low use levels. Leaves a moisturized, non-tacky residual skin feel.
* Presperse, Inc.
Somerset, NJ
Tel: (732) 356-5200
Fax: (732) 356-3533
E-mail: samples@presperse.com
Website: www.presperse.com
THALASSINE
INCI name: algae extract
Use levels: 1%
Applications: anti-aging skin care, makeup Comments: Myorelaxing and replumping.
UV Titan M263
INCI name: titanium dioxide, alumina, sodium hexametaphosphate, PVP Use levels: 3-25%
Applications: sun care products, daily wear products, makeup
Comments: Inorganic filter specially designed for increased compatability with organic filters.
Soypol
INCI name: water, natta gum
Use levels: 1.5-6%
Applications: skin lightener, moisturizer
Comments: fermented, a natural product based on soy.
* Rhodia
Cranbury, NJ
Tel: (609) 860-3601
Fax: (609) 409-8652
E-mail: rhodiac@us.rhodia.com
Website: www.rhodia.com
Mirasil C-DML
INCI name: cyclopentasiloxane and dimethiconol
Use levels: 3-10% in skin care products, minimum 60% in cuticle coast products
Applications: skin care, color cosmetics, sun care, shower gels, hair care, antiperspiratns/deodorants
Comments: In skin care applications, Mirasil C-DML imparts a smooth, silky feel on the skin and can help to improve water-resistance properties and long lasting effect in sun care products.
Mirasil DMCP-93
INCI name: PEG/PPG-10/2 dimethicone
Use levels: pre-shave lotions (emolliency): 1.0-3.0%, aerosol shaving lather (emolliency, foam stability, wetting): 0.2 -2.0%, skin lotions (emolliency, lubricity, wetting): 0.1-2.0%, perfumes, colognes (wetting, feel): 0.1-0.5%
Applications: skin care lotions, perfumes, shaving soaps
Comments: Mirasil DMCP 93 acts as an emulsifier, foam builder, anti-tack, lubricant, humectant, emollient and an excellent wetting and spreading agent.
* RITA Corporation
Crystal Lake, IL
Tel: (815) 337-2500
Fax: (815) 337-2522
E-mail: info@ritacorp.com
Website: www.ritacorp.com
Viscolam AT100P
Use levels: 1-10%
Applications: emulsifier, gelling agent & suspending agent
Comments: Viscolam AT100P is a coprocess, cost efficient emulsifier.
Ritafactants & the Eucorals
Use levels: 1-35%
Applications: An ultra mild, moisturizing surfactant system
Comments: These products are naturally derived and cost effective.
Polylift
Use levels: 1-10%
Applications: facial and body care
Comments: Polylift is an excellent tensing agent and film former.
* Rohm and Haas Company
Philadelphia, PA
Tel: (215) 592-3000
E-mail: www.rohmhaas.com
Website: www.rhpersonalcare.com
Aculyn 88 Polymer
INCI name: acrylates/steareth-20 methacrylate copolymer (proposed)
Use levels: 1-8%
Applications: rheology modifier: thickener, stabilizer, suspending agents
Comments: Excellent compatibility with surfactant systems (shower gels, body washes); provides suspendability of beads, etc. Natrulon LAC, a proprietary blend, allows formulators to take cost-effective advantage of the different mechanisms for reducing skin pigmentation
* McIntyre Group, Ltd.
University Park, IL
Tel: (708) 534-6200
Fax: (708) 534-6216
E-mail: info@mcintyregroup.com
Website: www.mcintyregroup.com
Mackanate DC-50
INCI name: disodium PEG-12 dimethicone sulfosuccinate
Use levels: 2-5%
Applications: mild personal cleansers, no-rinse products, baby wipes, acne cleansers
Comments: Extremely mild patented anionic surfactant. This new natural Oleosome technology imparts superior emulsification and moisturizing potential above and beyond traditional O/W emulsions. Ideal for sunscreens and anti-transfer makeup applications.
Crystal CP Castor Oil
INCI name: ricinus communis (castor) seed oil
Use levels: 1-25%
Applications: skin care, hair care and pharmaceutical applications
Comments: A cold press castor oil with exceptional color quality and purity. Environmentally friendly.
* DKSH North America, Inc.
Baltimore, MD
Tel: (410) 385-1666
Fax: (410) 385-1266
E-mail: sherilee.host@dkshna.com
Website: www.dkshna.com
Levan
INCI name: levan
Use levels: 0.1-5%
Applications: skin care, hair care, toiletry and color cosmetic moisturizer, humectant Comments: Natural polysaccharide that does not increase system viscosity; highly moisturizing and adhesive.
Solum D
INCI name: solum diatomeae
Use levels: 0.5-98%
Applications: mineral powders, cosmetics, muds and masques, talc replacement, sericite replacement, cornstarch replacement
Comments: Unique amorphous (noncrystalline) form of diatomaceous earth from silica skeletons of prehistoric freshwater diatoms. Exceptionally absorbent, smooth skin feel. It favors skin oxygenation, smoothes the microrelief and improves radiance and sluminosity.
Elastonyl
INCI name: hydrolyzed cucurbita pepo (pumpkin) seedcake
Use levels: 2-4%
Applications: elastonyl is particularly recommended in body care products to prevent and attenuate strechmarks
Comments: Identified proteic fraction from Cucurbita pepo, Elastonyl protects and repairs elastic and collagenic tissues by controlling the proteoase activity and by stimulating the synthesis of ECM constitutive fibers. In its unrefined state, this shea butter offers maximum natural occurring benefits through its UV absorbance and antioxidant components.
* Sabinsa Corp.
Piscataway, NJ
Tel: (732) 777-1111
Fax: (732) 777-1443
E-mail: info@sabinsa.com
Website: www.sabinsa.com
Chlorogenic Acid 60%
INCI name: coffea arabica extract (submitted)
Use levels: 0.5-2.0%
Applications: antioxidant, skin lightening, antimicrobial, hair care formulations
SabiWhite
INCI name: tetrahydrodiferuloylmethane
Use levels: 0.05-2.0%
Applications: skin whitener, antioxidant, broad-spectrum UV protection
* Sasol North America
Houston, TX
Tel: (201) 666-9918
Fax: (281) 368-1544
E-mail: info@us.sasol.com
Website: www.sasol.com
Marlowet CG
INCI name: PEG-18 castor oil dioleate
Use levels: 1-7%
Applications: cleansing/caring systems for skin and hair
Comments: In combination with Marlinat 242/90 M, Marlowet CG is an essential ingredient to obtain aqueous transparent liquid and high
foaming formulations with considerable amounts of oils (microemulsions) for cleansing and caring in one application. Provides excellent lather, thickening and conditioning properties.
* Micro Powders, Inc.
Tarrytown, NY
Tel: (914) 793-4058
Fax: (914) 472-7098
E-mail: mpi@micropowders.com
Website: www.mpipersonalcare.com
MICROPINK 5025
INCI name: polyethylene, red 28 lake, yellow 5 lake, titanium dioxide, calcium carbonate
Use levels: 5-10%
Applications: exfoliating soaps, foot scrubs, exfoliating face scrubs, body scrubs, creams, liquids, gels and lotions, oral care
MICROPURPLE 5025
INCI name: polyethylene, blue 1 lake, manganese violet
Use levels: 5-10%
Applications: exfoliating soaps, foot scrubs, exfoliating face scrubs, body scrubs, creams, liquids, gels and lotions, oral care
SYNSCRUB 164S
INCI name: synthetic wax
Use levels: 5-10%
Applications: exfoliating soaps, foot scrubs, exfoliating face scrubs, body scrubs, creams, liquids, gels and lotions
* Nalco
Naperville, IL
Tel: (630) 305-1000
Fax: (630) 305-2998
E-mail: personalcare@nalco.com
Website: www.nalco.com/cosmetics
Nanomer 8
INCI name: silica
Use levels: 1-3%
Applications: color cosmetics, facial scrubs
Comments: 8 nanometer paricle size, sodium stabilized.
Nanomer 20AS
INCI name: silica
Use levels: 1-3%
Applications: color cosmetics, facial scrubs
Comments: 20 nanometer particle size, acid stabilized.
Nanomer 75
INCI name: silica
Use levels: 1-3%
Applications: color cosmetics, facial scrubs
Comments: 75 nanometer size, sodium stabilized.
* Natunola Health
Winchester, ON, Canada
Tel: (613) 774-9998
Fax: (613) 774-2226
E-mail: sales@natunola.com
Website: www.natunola.com
Vegelatum Equiline SF
INCI name: canola oil (and) zea mays (Corn) starch (and) silica
Use levels: skin care creams and lotions: 1% to 10% (wt/wt), Others: 1% to 99% (wt/wt)
Applications: performs particularly well in skin care, hair care and sunscreen formulations, which include baby creams, emollient creams, cold creams, conditioning creams, protective creams, sunscreen and self-tanning lotions, lip balms, lipsticks, eye shadows and bar soaps.
Comments: Vegelatum Equiline SF has a lower viscosity and is a softer version of our standard Vegelatum Equiline ingredient.
Natunola Flax Extract 120
INCI name: water (and) linum usitatissimum (Linseed) seed extract (proposed)
Use levels: soap and shampoo: 10-45% (wt/wt), others: 1-99% (wt/wt)
Applications: skin care, hair care and personal care which include liquid soap, conditioning shampoo, cleanser, baby creams, emollient creams, cold creams, conditioning creams and protective creams
Comments: Natunola Flax Extract 120 is produced from flaxseed using our proprietary processing technology. It is very water miscible and can be added at room temperature for superior feel and film properties.
Jeenate 3H
INCI name: Polyethylene
Use levels: 3-5%
Applications: water in oil body creams and lotions
Comments: A low molecular weight, predominantly linear polyethylene that delivers good structure properties.
* Karlshamns AB
Karlshamn, Sweden
Tel: (46) 454-82000
Fax: (46) 454-82885
E-mail: lipid@karlshamns.se
Website: www.karlshamns.com
Lipex Shea
INCI name: butyrospermum parkii (EU), butyrospermum parkii (shea butter) (U.S.)
Use levels: 1-30%
Applications: gives superior shelf-life in formulations also at high shea butter levels in all type of skin care products
Comments: Cost effective, semi solid shea butter with improved crystallisation properties. The hygroscopicity and substantivity of L-carnitine coupled with the superior humectancy of decaglycerol provides truly multi-functional properties with excellent moisturizing capacity.
Natrulon LAC
INCI name: L-carnitine and arbutine
Use levels: 2-10%
Applications: Skin lightener, skin turnover accelerant Comments: This new approach utilizes skin lightening agents coupled with skin turnover accelerants. Furthermore, emulsions containing loaded I-Spheres, i.e. I-Spheres with the active of the customer's choice, penetrate the skin faster and to a great depth
Amiporine
INCI name: glycerine, punica granatum extract
Use levels: 2-4%
Applications: anti-wrinkle preparations, anti-aging moisturizers, hydrating moisturizers
Comments: Amiporine restores water circulation in the skin, thus the skin is re-hydrated and looks youthful and radiant again. It is a natural solution for protection of the dermal epidermal junction (DEJ), strengthening the structure of the dermis by reinforcing the extracellular matrix and stimulation of collagen, elastin and glycosaminoglycans (GAG).
* Cosmetochem International Ltd.
Switzerland
Tel: (41) 41 748 33 33
Fax: (41) 41 748 33 44
E-mail: info@cosmetochem.ch
Website: www.cosmetochem.com
Herbamilk
INCI name: water (and) prunus amygdalus dulcis (sweet almond) oil (and) cetearyl glucoside (and) robinia pseudoacacia flower extract
Use levels: 2-10%
Applications: shampoos, shower and bath products, soaps, body milks, bath oils and skin care products
Comments: A luscious new palette of natural plant milks formulated with an extensive range of different plant extracts and oils to form stable milky emulsions to add emolliency and a touch of luxury to products.
* Croda, Inc.
Edison, NJ
Tel: (732) 417-0800
Fax: (732) 417-0804
E-mail: marketing@crodausa.com
Website: www.crodausa.com
Crodamol STS INCI name: PPG-3 benzyl ether myristate Use levels: 0.5-4%
Applications: skin care, makeup, sunscreens, antiperspirants, deodorants, lipsticks, hair shine products, styling aids, fragrances, bath and body, microemulsions.
Comments: An emollient ester proven to be "superior to silicone." Now proven to detackify popular emollients like lanolin, petrolatum and polyisobutene.
Cromollient SCE
INCI name: Di-PPG-2 myreth-10 adipate Use levels: 1-25%
Applications: body washes, skin cleansers, baby shampoos, bubble baths, sensitive skin products, lipsticks, after shaves, baby products
Comments: Very mild emollient ester proven to reduce the irritation of surfactant systems without sacrificing clarity and foam.
Crodasinic product range
INCI name: sarcosines and sarcosinates
Use levels: 1-10%
Applications: shampoos, soaps, aerosols, toothpaste, mouthwashes,
household cleaners.
Comments: High foaming, mild conditioning surfactants and wetting agents. Use as filler, extender or active ingredient.
Chlorphenesin
INCI name: chlorphenesin
Use levels: 0.5-2%
Applications: skin care, hair care, color cosmetics, toiletries applications
Comments: Preservative against gram-negative bacteria, yeast and molds. in systems.
Neolone PE
INCI name: phenoxyethanol and methylisothiazolinone
Use levels: .30-.60%
Applications: broad-spectrum preservative
Comments: Approved for leave-on and rinse-off applications. Approved for leave on and rinse off in Japan. Natunola Flax Extract 120 leaves a remarkable smooth, silky feel on the skin and is superior emollient for cosmetic, skin care, hair care and personal care formulations.
Natunola CCT 7401
INCI name: caprylic capric triglyceride (and) zea mays (corn) starch (and) silica (proposed)
Use levels: Skin care creams and lotions: 1-15% (wt/wt), Others: 1-99% (wt/wt)
Applications: skin care, hair care and sunscreens which include baby creams, emollient creams, cold creams, conditioning creams, protective creams, sunscreen lotion, lip balm, lipsticks, eye shadows and bar soaps.
Comments: Natunola CCT 7401 has a gel-like structure and is clear, colorless, and odorless. It is a low molecular weight, low viscosity ester that offers superior reduction in oily or heavy feeling formulations caused by components such as UV absorbers and pigments.
ISP Refined Shea Butter
INCI name: butyrospermum parkii (shea butter)
Use levels: 1.0-25%
Applications: creams and lotions, moisturizers, body butters
Comments: Derived from the fruit of the African shea (karite) tree, ISP Refined Shea Butter is of the highest purity and can be easily formulated into a wide variety of personal care products including intensive skin moisturizers, sunscreens, lip balms, cosmetics, and more.
* Jeen International
Fairfield, NJ
Tel: (973) 439-1401
Fax: (973) 439-1402
E-mail: info@jeen.com
Website: www.jeen.com
Jeesperse HD
INCI name: isododecane, dimethicone crosspolymer-3, laureth-4, ceteth-10
Use levels: 5-10%
Applications: creams, lotions and treatment products
Comments: High solids, low particle size dispersion of gelled isododecane. Micromerol is also anti-inflammatory (in vitro study data).
* GE Advanced Materials, Quartz
Strongsville, OH
Tel: (440) 878-5700
Fax: (440) 878-5928
E-mail: geacinfo@ge.com
Website: www.advceramics.com
Softouch CCX-1
INCI name: boron nitride
Use levels: 1-5%
Applications: skin care, color cosmetics, sun care
Comments: Softouch CCX-1 is our grade of boron nitride with the smallest particle size--0.7 microns. It exhibits antimicrobial properties over a broad pH range, and has good solubility and solvent characteristics.
* Shin-Etsu Silicones of America
Akron, OH
Tel: (518) 794-8905
Fax: (518) 795-8757
E-mail: cosmetics@shinetsusilicones.com
Website: www.shinetsusilicones.com
KF6038
INCI name: PEG-9 polydimethylsiloxyethyl dimethicone
Use levels: 1.0-2.0%
Applications: Water in Silicone Oil or Water in Organic Oil emulsifier
Comments: Only emulsifier to emulsify mixed silicone and organic oil systems.
USG106
INCI name: isododecane and dimethicone/ vinyl dimethicone crosspolymer
Use levels: 5.0-50.0%
Applications: where a soft, dry and silky feel is desired in an isododecane system Comments: Excellent thickener for isododecane systems.
KP550
INCI name: isododecane and acrylates/ dimethicone copolymer
Use levels: 5.0-25.0%
Applications: flexible, highly adhesive film former for sun care applications and for other skin care actives
Comments: Organic compatible, durable and flexible film former.
* Silab
Brive Cedex, France
Tel: (33) 555 84 58 40
Fax: (33) 555 84 95 64
E-mail: silab@silab.fr
Website: www.silab.fr
Eclaline
INCI name: octensyl succinc anhydride and hydrolyzed lupine protein Use levels: 2-4%
Applications: eclaline can be used in all skin care products recommended for skin radiance improvement
Comments: Rich in lupine lipopeptides, it improves microcirculation thanks to VEGF synthesis increase. Elastonyl smoothes the micro relief and favors skin tone.
Aquaphyline
INCI name: hydrolyzed viola tricolor extract
Use levels: 2-4%
Applications: a new generation of moisturizing which regulates irrigation and retention of water
Comments: Rich in oligosaccharides from wild pansies, Aquaphyline regulates the process of epidermal hydration. I-Spheres are a patent-pending delivery system with a unique structure and distinct active transport and moisturization benefits. Stabilization of pigments in silicone systems.
5562 Carbinol Fluid
INCI name: bis-hydroxyethoxypropyl dimethicone
Use levels: 2-25%
Applications: color cosmetics, sun care, face and body care,
underarm products
Comments: Smooth, light, nontacky feel, nonirritating. Kurt Richter GmbH
Berlin, Germany
Tel: (49) 30-85-10260
Fax: (49) 30-85102685
E-mail: info@clr-berlin.com
Website: www.clr-berlin.com
Belides
INCI name: bellis perennis (daisy) flower extract
Use levels: 2-5%
Applications: skin-lightening cosmetics and in case of pigmentation disorders, hyperpigmentation or age spots
BioBalance
INCI name: water (and) lactose (and) milk protein (and) bifida
ferment lysate Use levels: 2-5%
Applications: use to rebalance tired, stressed and sensitive skin. It lowers the stress level in the skin, protects it against environmental influences and stablizes the immune system
Modukine
INCI name: lactose (and) milk protein
Use levels: 0.5%
Applications: recommended for preventive and accompanying care in the treatment of problematic, extremely dry or atopic dry skin conditions
* Cognis Corp.
Ambler, PA
Tel- (800) 531-0815
Fax: (215) 628-1450
Website: www.cognis-us.com
Cutina PES INCI name: pentaerythrityl distearate
Use levels: 1-4%
Applications: lotions, creams, gels, butters, after-sun products
Comments: Cutina PES is a new consistency-giving wax that imparts a positive effect on skin feel. It is a purified pomegranate extract that is able to rehabilitate the natural water flow by stimulating the skin specific aquaporins (AQP3).
LaraCare A200
INCI name: galactoarabinan
Use levels: 2-10%
Applications: skin firming/tightening, anti-wrinkle preparations, AHA exfoliants, moisturizers
Comments: LaraCare A200 is a highly functional polysaccharide, extracted from already harvested North American larch trees, which grow in abundance in the northwest U.S. These formulations are extremely mild to skin and provide the skin with moisture.
Imwitor 560
INCI name: sodium lauroyl lactylate
Use levels: 2-10%
Applications: foaming agent, thickener for shampoos, powerful emulsifier, suitable as a conditioner in hair care and cleansing formulations
Comments: Humectant, imparts silky skin feel, forms stable low-viscosity lotions, mild to sensitive skin and eyes.
Isocarb 12 Acid
INCI name: butyloctanoic acid
Use levels: 0.2-3%
Applications: soaps, shampoos, creams, lotions, shaving products Comments: Odorless monobranched carboxylic acid with a melting range significantly lower than the corresponding linear fatty acid. Meets the new European Phamaceutical requirements for absorbance and is USP certified.
Naturechem SHEA-UR
INCI name: butyrospermum parkii (shea butter)
Use levels: 1-25%
Applications: skin and hair care
Comments: A natural, unrefined shea butter with exceptional color and moisturization characteristics. Components in the formula inhibit elastase, an enzyme that breaks down elastin in the skin, causing wrinkles
Traditional AnitoxidantT Inside and Out Bioactive Botanical Ingredient Formula
INCI name: Pending
Use levels: 1-5%
Applications: for topical use on skin and for internal use as a dietary supplement
* DSM Nutritional Products, Inc.
Parsippany, NJ
Tel: (800) 526-0189
Fax: (973) 257-8580
E-mail: nutraaccess.parsippany@dsm.com
Website: www.nutraaccess.com
Allantoin INCI name: allantoin
Use levels: 0.05-0.3%
Applications: Due to its soothing, softening and protecting properties, Allantoin has a wide range of applications, including skin care, toiletries and oral care products
* Elementis Specialties
Hightstown, NJ
Tel: (609) 443-2500
Fax: (609) 443-2422
E-mail: consumer@elementis-na.com
Website: www.elementis-specialties.com
Bentone Gel GTCC V
INCI name: caprylic/capric triglyceride (and) stearalkonium hectorite (and) propylene carbonate
Use levels: 5-10%
Applications: All skin care products including creams, lotions and treatment products
Comments: Bentone Gel GTCC V is an optimally dispersed and activated pre-dispersion of stearalkonium hectorite in caprylic/capric triglyceride. This material also has a very high melt point making it suitable for stick applications.
* Tri-K Industries, Inc.
Northvale, NJ
Tel: (201) 750-1055
Fax: (201) 750-9785
E-mail: info@tri-k.com
Website: www.tri-k.com
I-Spheres
INCI name: I-Spheres containing
Tocopherol: aqua, paraffin wax, tocopherol, glycerin, glyceryl stearate, sodium lauroyl sarcosinate, phenoxyethanol, methylparaben, ethylparaben, butylparaben, propylparaben, isobutylparaben
Use levels: up to 20%, depending on the active being loaded in I-Spheres
Applications: all skin care applications in which a specific lipophilic active is being used to target the skin in a specific way
Comments: I-Spheres can improve the ability of actives to penetrate the skin and the transport of actives to the exact location where they are needed; the result is an increase in the effectiveness of personal care products. Also available in an anhydrous form, 100% solids.
Mackamide AME-100
INCI name: acetamide MEA Use levels: 2-5%
Applications: mild skin conditioners, non-oily skin lotions, skin cleansers
Comments: Excellent skin humectant for use in non-oily lotions. Imparts superior skin moisturization when compared to glicerin.
Mackol CAS-100N
INCI name: sodium coco-sulfate
Use levels: 3-7%
Applications: body wash, shave cream, syndet bars, skin cleansers
Comments: Excellent natural replacement for SLS, SLES, betaines and alkanolamides in personal cleansing products. Can be used as the primary surfactant in specialty applications such as acne cleansing or as a secondary surfactant to significantly reduce the irritation potential of other anionics. Effective solubilizer of lipophilic ingredients, such as sunscreens and volatile silicones. Good efficiency in formulations with natural skin pH. These benefits can be extended to topical applications to polish away impurities while also soothing and calming the skin.
ProDEJine LS 9784
INCI name: mannitol (and) cyclodextrin (and) yeast extract (and) disodium duccinate
Use levels: 1-3%
Applications: skin treatments, lotions, creams, gels and serums
Comments: A new natural and effective anti-aging active that maintains skin's cohesion and the density of its supporting tissue, thus preventing the formation of wrinkles, while keeping the skin youthfully firm and supple. Low viscosity, nearly colorless fluid which makes formulating and handling quick and easy.
Protelan AGL 95
INCI name: sodium lauroyl glutamate
Use levels: 2-10%
Applications: mild body cleaning agents such as baby baths, hair shampoos or facial cleansers
Comments: Very mild surfactant, reduces irritation Exilis potential, based on renewable materials of vegetable origin, also suitable for cold emulsification processes.
Protelan AG 8
INCI name: sodium capryloyl glutamate
Use levels: 3-8%
Applications: body cleaning agents with deodorizing effects and anti-acne formulations
Comments: Mild surfactant with deodorizing and oil control effects, based on renewable materials of vegetable origin.
http://www.thefreelibrary.com/Skincarenewingredients-a0132747397. It also works very well in formulations with electrolytes and/or polymers.
White Tea and Bamboo Peeling Primaspenge
INCI name: aqua (and) glycerin (and) Bambusoidea (and) Camelia Sinensis (and) Agar (and) Algin (and) Chitosan (and) CI 77891 (and) CI 77019
Use levels: 0.5-3%
Applications: exfoliating shower gels and facial scrubs, peeling facial creams, anti-cellulite, shaping and body firming gels and creams
Comments: It combines the well-known anti-oxidant benefits of white tea and the effective exfoliating performance of bamboo with an attractive appearance. LaraCare is an all-natural, mild, nonirritating, water soluble polymer that delivers a multitude of benefits to skin care, such as reduction of fine lines and wrinkles, boosts AHA activity, and moisture control.
* Zschimmer & Schwartz
Lahnstein, Germany
Tel: 49 0 2621 12262
Fax: 49 0 2621 12568
E-mail:
surfactants@zschimmer-schwarz.de
Website: www.zschimmer-schwarz.de
Oxetal VD 92
INCI name: PEG-90 glyceryl isostearate (and) laureth-2
Use levels: 0.3-0.5%
Applications: modern thickening agent
Comments: Superior thickening effect especially in non-standard formulations. Compatible with many polar and nonpolar solvents. It offers the formulator the following benefits: rheology modification, improvement in emulsion stability and emolliency for a smooth skin feel.
* Engelhard Corporation
Stony Brook, NY
Tel: (631) 689-0200
Fax: (631) 689-2890
E-mail: pcmsales@engelhard.com
Website: www.engelhard.com/pcm
EquiStat advanced anti-aging complex
INCI name: butylene glycol (and) pyrus malus (apple) fruit extract (and) glycine soja (soybean) seed extract
Use levels: 1-5%
Comments: Inhibits matrix metalloprotease production while stimulating collagen synthesis and reducing inflammation in vitro. Delivers young-looking, smooth skin.
Rejuvenol topical vitamin A delivery system
INCI name: water (and) glycine soja (soybean) oil (and) PEG-4 (and) retinol (and) behenamidopropyl dimethylamine behenate Use levels: 1-2%
Micromerol elastase-inhibiting apple extract
INCI name: butylene glycol (and) pyrus malus (apple) fruit extract Use levels: 1-5%
Comments: A natural extract of apple possessing exceptional elastase inhibition activity (in vitro study data), making it suitable for formulations directed toward maintaining skin's youthful elasticity. Especially compatible with avobenzone (butyl methoxydibenzoylmethane) in sunscreens, unlike formaldehyde donors.
* Rutherford Chemcials LLC-CasChem
Bayonne, NJ
Tel: (201) 858-7900
Fax: (201) 858-0308
E-mail: steve.rodgers@rutherfordchemicals.com
Website:
www.rutherfordchemicals.com
Stantiv OMA-2
INCI name: octadecene/MA Copolymer
Use levels: 0.5-5%
Applications: water resistance polymer system
Comments: A easy-to-formulate, liquid system which is added to formulations to enhance water resistance properties. Aquaphyline stimulates the synthesis of aquaporines and increases the water binding capacity of the epidermis thanks to its effect on endogenous hyaluronic acid synthesis. Aquaphyline is recommended for intense hydration program to fight against dry skin.
* Sinerga S.p.A.
Pero, Milan, Italy
Tel: (39) 02 3394011
Fax: (39) 02 33940138
E-mail: info@sinerga.it
Website: www.sinerga.it
Trealix
INCI name: trehalose, hydrolyzed vegetable protein Use levels: solutions and detergents: 2.5-5%; skin care emulsions: between 1-3%
Applications: As a moisturizing functional ingredient, Trealix simulates the composition of Natural Moisturising Factor (NMF) thanks to its high content in polisaccharide, vegetable origin protein hydrolysates and amino acids (oat, corn, soy, wheat), that restore normal skin hydration.
Comments: It is an emollient, hydrating and lenitive agent, particularly indicated for delicate skin and hair
Nanocream
INCI name: potassium lauroyl wheat aminoacids, palm glyceride,
capryloyl glycine, water
Use levels: between 2-10% depending on the oily phase
Applications: emulsifier indicated for fluid O/W emulsions with particularly low particle size of the droplets (100-300 nm). It is an easy-to-use liquid form requiring no pre-dissolving.
* CLR (Chemisches Laboratorium)
Dr. Here is a list of new skin care ingredients introduced by suppliers during the past 12 months. Easily vehicles several functional cosmetic ingredients, respecting the natural situation of aggregation of hydrophilic and lipophilic cutaneous factors
Comments: Patented combination of vegetal-derived emulsifiers for the preparation of nanoemulsions.
Cocoyl Oat Polypeptide
INCI name: potassium cocoyl hydrolyzed oat protein, water
Use levels: 5-20%
Applications: particularly suitable for plant-based cosmetics and
baby care products, replacing similar derived from animal proteins, especially for formulating mild detergents with high skin tolerability
Comments: the product may be used in combination with other surfactants
* Stepan
Northfield, IL
Tel: (847) 446-7500
Fax: (847) 501-2443
Website: www.stepan.com
Stepan-Mild PCL INCI name: sodium methyl-2 sulfo laurate and disodium 2-sulfo laurate and sodium lauryl sulfoacetate
Applications: use in shampoos, body washes and other cleansing products
Comments: Mild non-irritating surfactant system with creamy stable foam and an excellent skin after-feel.
* Summit Specialty Chemicals
Fort Lee, NJ
Tel: (201) 585-9100
Fax: (201) 585-2341
E-mail:
cosmetics@summitspecialty.com
Oligo GGF
INCI name: raffinose Use levels: 0.5-3.0%
Applications: skin care and color care
Comments: Oligo GGF is a natural moisturizing agent refined from beet sugar. This material is carbohydrate and an oligosaccharide. Raffinose is non-hygroscopic and can be readily used in skin care formulation where natural key ingredients are sought.
Royal Pearl Plus UB-17
INCI name: polyurethane-16
Use levels: 2.0-5.0%
Applications: skin care lotions and creams
Comments: Royal Pearl Plus UB17 is a feel enhancing agent that helps provide elegance to cream and lotion formulations. Provides a soft light powdery feel from a volatile dispersion with good film properties and spread ability.
Jeesilc 6056
INCI name: dimethicone, dimethiconol, laureth-4, laureth-23
Use levels: 4-8%
Applications: sun screen sprays, lotions and body creams
Comments: High molecular weight silicone dispersion that has an average particle size of 700nm. Better pigment dispersion versus MQ resin, provides long lasting and non-transfer benefits to foundations and lipsticks.
BY11-030 Emulsifier/Gelling agent
INCI name: cyclopentasiloxane and PEG/PPG-19/19 dimethicone
Use levels: 3-22%
Applications: facial and body care, color cosmetics, fragrances, sunscreens
Comments: Crystal clear, low odor formulation aid for w/s systems with unique texture and feel. Rapid solidification and stabilization gives shorter processing times.
Lipex 205
INCI name: butyrospermum parkii (EU), butyrospermum parkii (shea butter) (U.S.)
Use levels: emulsions 2-15%, anhydrous products 5-20%
Applications: liquid shea butter for general use in skin care and hair care
Comments: Easy to use due to the liquid character of the product.
Lipex Cocoasoft
INCI name: theobroma cacao (EU), theobroma cacao (cocoa) seed
butter (U.S.)
Use levels: emulsions 1-20%, anhydrous products 1-10%
Applications: Improved cocoa butter for skin carecreams and lotions
Comments: Enhanced crystallisation properties and soft texture compared to traditional cocoa butter. For more information about the ingredients listed here, contact the supplier directly. * Ajinomoto USA, Inc.
Paramus, NJ
Tel: (201) 225-7175
Fax: (201) 261-7267
E-mail: sakurait@ajiusa.com
Website: www.ajichem.com
Ajidew ZN-100
INCI name: Zinc PCA Use levels: 1-5%
Applications: creams, lotions, tonics, shower gels
Comments: Helps control sebum, conditions the skin
Aldew PS-306
INCI name: Phytosterol Behenyl/Octyldodecyl Lauroyl Glutamate
Use levels: 0.3-10%
Applications: creams, lotions, makeup
Comments: Eldew PS-306 binds 600% water to itself, behaves similarly to ceramide, conditions the skin.
* Arista Industries
Wilton, CT
Tel: (203) 761-1009
Fax: (203) 761-4980
E-mail: info@aristaindustries.com
Website: www.aristaindustries.com
Peach Kernel Oil
INCI name: Prunus Persica (Peach) Kernel Oil
Use levels: based on formula
Applications: creams, lotions, soaps and bath oils
Comments: Dry, non-greasy oil, good emollient and moisturizing agent.
Brazil Nut Oil
INCI name: bertholletia excelsa seed oil
Use levels: based on formula
Applications: hand creams, lotions, aromatherapy and massage oils Comments: Spreads over and absorbs easily into the skin.
Rose Hip Seed Oil INCI name: Rosa Canina Fruit Oil
Use levels: based on formula
Applications: facial creams and body lotions
Comments: Contains sufficient amounts of essential fatty acids, which help maintain good health of the skin and body; helps reduce wrinkles and signs of aging; good for treatment of burns and scars.
* Chemsil Silicones, Inc.
Chatsworth, CA
Tel: (818) 700-0302
Fax: (818) 700-0507
E-mail: chemsilsilicone@aol.com
Website: www.chemsil.com
Cosmetic Fluid 1486-NH
INCI name: cyclopentasiloxane (and) amino propyl dimethicone
Use levels: 3-10%
Applications: moisturizing lotions, cremes
Comments: Cationic, high molecular weight elastomer compound, leaves skin with non-greasy after-feel; substantive to skin and hair.
Chemsil SPD INCI name: dimethicone / dimethicone vinyl crosspolymer
Use levels: 5-20%
Applications: after shower silk spray, light-feeling lotions
Comments: Silicone powder aqueous dispersion, sprayable, leaves matte finish, particle size less than three microns.
Cosmetic Fluid 6520-DM
INCI name: hexamethyldisiloxane (and) dimethicone
Use levels: 20-100%
Applications: patented non-greasy delivery systems for analgesics, retinol and sunscreens
Comments: Extremely dry, greaseless silicone serum, water-resistant, perfect retinol spot treatment carrier, quick dry time, contains no D4.
* Ciba Specialty Chemicals High Point, NC
Tel: (336) 801-2126
Fax: (336) 801-2020
E-mail: hpc.northamerica@bibasc.com
Website: www.cibasc.ocm/personalcare
Tinovis ADM
INCI name: sodium acrylates copolymer (and) mineral oil (and) PPG-1 Trideceth-6
Use levels: hand and body lotion, cosmetic base 1.0%, suntan lotion and cream 1.5%, foundations 1.6%
Applications: hand and body lotion, cosmetic base, suntan lotion and cream, foundations and makeup remover
Comments: Using Tinovis ADM as the thickener in skin care formulations will enhance the end product by also providing ease of pick-up, speedy breakdown, excellent spreadability, easy penetration, no greasiness, no tackiness.
TINOVIS GTC INCI name: acrylates/beheneth-25 methacrylate copolymer
Use levels: 1.5-5.0%
Applications: thickener in creams and lotions (3.0%), face and body gels (1.5-5.0%), foundations and makeup remover (2.0-5.0%)
Comments: Delivers excellent clarity. Ability to make clear silicone gel with high levels of perfume without the need for ethanol. Enhance foam height and the stability of SLS and alkyl sulfonate systems. This spherical free-flowing powder imparts a creamy luxurious rich texture. all in one. Enhances SPF and fragrance release.
* Draco Natural Products, Inc.
San Jose, CA
Tel: (408) 287-7871
Fax: (408) 287-8838
E-mail: info@dracoherbs.com
Website: www.dracoherbs.com
TriniteaT Inside and Out Bioactive Botanical Ingredient Formula
INCI name: camellia sinensis extract
Use levels: 1-5%
Applications: for topical use on skin and for internal use as a dietary supplement
Comments: Trinitea is specially formulated from three select teas (camellia sinensis) and has been showed in scientific studies to protect and repair skin from exposure to UV radiation.
Sea RoseT Inside and Out Bioactive Botanical Ingredient Formula
INCI name: sea buckthorn (hippophae rhamnoides) extract (and) rhodiolia rosea root extract
Use levels: 1-5%
Applications: for topical use on skin and for internal use as a dietary supplement.
Comments: Sea rose is specially formulated from sea buckthorn and rhodiola rosea as an elastase inhibitor. Impart lubricity for a soft, silky feel. It is clear transparent version among our flax extracts. Gives stable emulsions without graininess and texture changes, even at high levels in the formulation.
* Kobo Products, Inc.
South Plainfield, NJ
Tel: (908) 757-0033
Fax: (908) 757-0905
E-mail: info@koboproductsinc.com
Website: www.koboproducts.com
Koboguard 5400 CCT
INCI name: hydrogenated polycyclopentadiene (and) capric/caprylic triglyceride
Use levels: 5-20%
Applications: skin care, sunscreens, makeup
Comments: adhesive film former.
BPD500FL
INCI name: HDI/trimethylol hexyllactone crosspolymer (and) talc (and) silica (and) titanium dioxide (and) iron oxides
Use levels: 1-10%
Applications: skin care, makeup
Comments: excellent feel enhancer and optical blurring material with a light skin tone.
CAMFP25VTTS INCI name: caprylyl methicone (and) titanium dioxide (and) alumina (and) PEG-9 polydimethylsiloxyethyl dimethicone (and) polyhydroxystearic acid (and) isopropyl titanium triisostearate/ triethoxycaprylylsilane crosspolymer
Use levels: dependant on SPF needs
Applications: sun care
Comments: a fluid, ultrafine TiO2 dispersion offering high UV protection.
* LCW Sensient Chemical Technologies
Saint Ouen l'Aumone, France
Tel: (33) 34-48-5700
Fax: (33) 34-64-4440
E-mail: lcw@lcw.fr
Website: www.lcw.fr
Covascreen WTI
INCI name: titanium dioxide (and) aqua (and) glycerin (and) alumina (and) sodium polyacrylate (and) phenoxyethanol (and) sodium edentate (and) silica (and) sodium polyphosphate Use levels: 2-60%
Applications: Skin care, sun care and makeup products
Comments: Advanced aqueous dispersion of alumina coated nanofine titanium dioxide with superior protection against UV radiation and high transparency.
Covacryl P12
INCI name: acrylates copolymer
Use levels: 0.5-25%
Applications: skin care, sun care and makeup products
Comments: Polymer emulsion free from surfactant containing acrylic copolymer with polar groups particularly adapted for the formation of elastic and supple films.
Carbomat
INCI name: calcium carbonate
Use levels: 0.5-20%
Applications: skin care, sun care and makeup products
Comments: Natural inorganic powder specially selected for its high performances in molded powders with a perfect combination between high cohesion, good pay off and no shrinkage after drying.
* Lonza Inc.
Allendale, NJ
Tel: (800) 777-1875
Fax: (201) 785-9013
E-mail: contact.allendale@lonza.com
Website: www.natrulon.com
Natrulon OSF
INCI name: carthamus tinctorius (saf flower) oleosomes
Use levels: 5-12%
Applications: skin care, sun care, color cosmetics and all O/W emulsion systems
Comments: A natural self-emulsifying base with multi-functionalities such as an emollient, emulsifier, moisturizer, stabilizer ... Use in paraben-free systems.
* Dow Corning
Midland, MI
Tel: (989) 496-4000
Fax: (989) 496-6731
E-mail: product.info@dowcorning.com
Website: www.dowcorning.com/content/personalcare
Dow Corning 670 fluid
INCI name: cyclopentasiloxane (and) polypropylsilsequioxane
Use levels: 3-20%
Applications: color cosmetic and sunscreens Comments: wash off resistance with a non-greasy, non-tacky feel in sunscreens. It is the ingredient of choice when color and odor is important and can be used as a skin conditioner, emollient and viscosity builder.
* Noveon
Brecksville, OH
Tel: (216) 447-5000
Fax: (216) 447-5740
E-mail: personalcareamerica@noveon.com
Website: www.carbopol.com
Carbopol Ultrez 20 Polymer
INCI name: acrylates/C10-30 alkyl acrylate crosspolymer
Use levels: 0.2-1.0%
Applications: rheology control, thickening and suspending in systems with moderate levels of surfactants and in the presence of electrolytes
Comments: In skin care products, Carbopol Ultrez 20 Polymer provides excellent thickening and emulsion stabilization with a light, cushiony feel, and low residual tackiness.
Schercemol TN Ester
INCI name: C12-15 alkyl benzoate Use levels: 2-7%
Applications: facial creams and lotions, hand and body lotions, liquid soaps and cleansers, sunscreens, pre-shave, shave and aftershave lotions
Comments: Excellent tack-reducing emollient with a dry lubricating feel, especially when used with mineral oil or petrolatum