Beta Tools Action euro 2016

~lJet'_;S Valid until 15/12/2016

Ac_Neutro_Exp_2 e3 .indd 2

23/11/15 14:25

Contenitori Index Assortments Bits Containers Cutting tools Drilling and threading tools Electrotechnics General maintenance tools Hammers and chisels Male-end wrenches Measuring tools Pliers Plumbing tools Pullers Screwdrivers Sockets Stainless steel tools Thermoformed trays Torque wrenches Wrenches

15÷16 25 2÷14 36÷37 38 44÷46 48÷53 35 23÷24 39 32÷33 42÷43 40÷41 34 26÷29 47 16÷19 30÷31 20÷22

AUTOMOTIVE Battery Brakes Diagnostics Engine Lifting Wheels Transmission

57÷59 68 54÷56 60÷67 70÷77 69÷70 67÷68

Pneumatic tools

78÷83

Safety footwear Workwear

84÷90 91÷95

1 Ac_Neutro_Exp_1_8.indd 1

20/11/15 14:16

C41H

 041000002

399.-

21

• Sheet metal frame and plastic top, synonymous with remarkable sturdiness and reduced weight.

• 2 detachable modules: 1 upper tool box, 1 module with 2 drawers 95 mm in height, 1 pull-out case made of plastic, 66 mm high, and 1 drawer 295 mm in height.

• Oversized castors (160 mm), built into frame for easy transport - for example, on steps.

• Side centralized lock for closing drawers of lower module.

• Drawers with ball bearing slides and double closing hook.

• Telescopic aluminium handle.

• Small tool holder built into upper tool box.

• Lower drawer with double ball bearing slides

825 mm 33 5m m

Two-module tool trolley

536 mm

C42H

 042000002

14

294.Three-module tool trolley

730 mm

• 3 detachable modules: 1 upper tool box, 220 mm high 1 central tool module, 180 mm high 1 lower tool module with castors, 330 mm high.

• Can be used with 2 modules.

m

5m

34

Upper tool box with interior object compartment and 3 tool trays built into cover.

Telescopic handle, can be adjusted in 3 positions.

Quick module release system: easy, quick access to all tool compartments.

545 mm

Sheet metal framses and plastic top

Oversized castors (ø 160 mm).

2 Ac_Neutro_Exp_1_8.indd 2

20/11/15 14:17

C27S

Containers

C27S

 027000201

466.-

20

Folding tool trolley for outdoor jobs, empty

570 995 mm 39 5m m

• Folding tool trolley, with folding columns for effortless transport.

• 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening.

• Large lower object compartment, 588x277x220 mm.

• Sheet metal frame.

• 2 fixed castors, Ø 160 mm, and 2 steering castors, Ø 100 mm with brake.

• Thermoplastic worktop with 6 built-in tool trays.

• Centralized lock.

• Can accommodate drawer partitions and MC foam tool trays

765 mm

n° 2

70 mm

20 kg

new item

Can be transported on a vehicle

5927VU/M  059270021

589.-

MC10

Assortment of 108 tools in soft foam tray for trolley C27S

MC20 3

Ac_Neutro_Exp_1_8.indd 3

20/11/15 14:17

C39



 039000001  039000002  039000003

1200 kg

Alluminium alloy structure: +resistance +LIGHT

C39/7 1 069.-

61

Roller cab with 7 drawers

• 7 drawers (588x367 mm) with ball bearing slides • Front centralized safety lock.

• Thermoplastic worktop.

• 4 castors 125 mm in Ø: 2 fixed and 2 steering (1 with brake).

971 mm

Castors with metal cores for enhanced sturdiness

1 050.-

n°

m

m

5 1 1

800 mm

971 mm

 039000031  039000032  039000033

C39/6

0 50

59

Mobile roller cab with 6 drawers

29

 039000101  039000102  039000103

C39T 790.-

70 mm 140 mm 280 mm

30 kg 35 kg 40 kg

m

m

n° 4 1 1

971 mm

64

0 50

m

m

800 mm

n°

Mobile roller cab with 8 drawers

6 2

70 mm 140 mm

30 kg 35 kg

Portable tool chest with 4 drawers (588x367 mm) with ball bearing slides

340 mm

1 299.-

30 kg 35 kg 35 kg

800 mm

 039000041  039000042  039000043

C39/8

0

50

70 mm 140 mm 210 mm

n° 4

70 mm

30 kg

0 50

m

m

800 mm

4 Ac_Neutro_Exp_1_8.indd 4

20/11/15 14:18

Specifications posed covering rktop e with brake), with ex70 (on ng • Multi-ply wood womm eri ste 2 d mm high an ed rs, fix 2 • 4 castors, Ø 125 588x367 mm, with ball bearing slides: 6 drawe le 7-drawer modu high 1 drawer, 240 mm ted by foamed rubber mats tec • Drawer bases prosa fety lock d ze ali ntr • Front ce ghout length of drawer ou thr • Opening system of aluminium • Drawer front made

C39SM 1 810.-



Racing SM

 039390001  039390002  039390003

1200 kg

125

Special mobile roller cab, Racing SM type

980 mm

Service module • Integrated wastepaper basket • Paper roll compartment • 1 large drawer (420x305x270 mm) m

m

0

50

1500 mm

n° 6 1

70 mm 240 mm

Racing MD

 039390101  039390102  039390103

30 kg 45 kg



1200 kg

C39MD 1 850.-

123

Special mobile roller cab, Racing MD type

980 mm

2-drawer module 588x367x270 mm and 588x367x380 mm, with ball bearing slides • Drawer bases protected by foamed rubber mats • Front centralized lock • Opening system throughout length of drawers • Drawer front made of aluminium

0

50

m

m

1500 mm

n° 6 1

70 mm 240 mm

30 kg 45 kg

5 Ac_Neutro_Exp_1_8.indd 5

20/11/15 14:18

C24S



 024002071  024002072  024002073

800 kg

C24S/7 720.-

58

Mobile roller cab with 7 drawers

Castors with metal cores for enhanced sturdiness 955 mm

• 7 drawers (588x367 mm) with ball bearing slides.

• Drawer bases protected by foamed rubber mats.

• 4 castors 125 mm in Ø: 2 fixed and 2 steering (one with brake).

• Front centralized safety lock.

• Thermoplastic worktop designed to match tool chests C22S, C23S, C23SC and C23ST • Integrated side bottle holder.

• Paper roll holder item 2400S-R/PC can also be included.

5

44

n°

m

m

5 1 1

740 mm

70 mm 140 mm 210 mm

25 kg 30 kg 30 kg

70 mm 140 mm 280 mm

25 kg 30 kg 35 kg

70 mm 140 mm

25 kg 30 kg

 024002061  024002062  024002063

560.-

55 955 mm

C24S/6

Mobile roller cab with 6 drawers

n° 5

44

m

m

740 mm

4 1 1

 024002081  024002082  024002083

 023000521  023000522  023000523

C23ST 455.-

Mobile roller cab with 8 drawers

5

44

m

m

740 mm

n° 6 2

Portable tool chest with 5 drawers

• 5 drawers (588x367 mm) with ball bearing slides • Front centralized safety lock.

• Can be fitted with kit composed of 4 castors and 1 handle (2300ST/KIT)

36

454 mm

630.-

61 955 mm

C24S/8

n° 5

70 mm

25 kg

5

44

m

m

740 mm

6 Ac_Neutro_Exp_1_8.indd 6

20/11/15 14:18

C24SA anti-tilt 

 024002171  024002172  024002173

stem: Anti-tilt syw om being ral dra ersefrned ve se ts n ve re p y op simultaneousl

C24SA/7 649.-

58

800 kg

Mobile roller cab with 7 drawers, with anti-tilt system

• Seven drawers (588x367 mm) with ball bearing slides:5 drawers, 70 mm high1 drawer, 140 mm high1 drawer, 210 mm high • Drawer bases protected by foamed rubber mats.

• Does not allow simultaneous opening of several drawers • Four castors 125 mm in Ø: 2 fixed and 2 steering (one with brake) • Front centralized safety lock • Integrated side bottle holder

955 mm

Castors with metal cores for enhanced sturdiness 5

44

m

m

740 mm

n° 5 1 1

new item

70 mm 140 mm 210 mm

25 kg 30 kg 30 kg

70 mm 140 mm 280 mm

25 kg 30 kg 35 kg

70 mm 140 mm

25 kg 30 kg

 024002161  024002162  024002163

C24SA/6 55

955mm

625.-

n° 5

44

m

m

740 mm

4 1 1

Mobile roller cab with 6 drawers, with anti-tilt system

new item  024002181  024002182  024002183

680.-

61

955 mm

C24SA/8 5

44

m

m

740 mm

n° 6 2

Mobile roller cab with 8 drawers, with anti-tilt system 7 Ac_Neutro_Exp_1_8.indd 7

20/11/15 14:19



1000 kg

 024002271  024002272  024002273

C24SA-XL/7 835.-

84

Mobile roller cab with 7 drawers, with anti-tilt system, long model

Castors with metal cores for enhanced sturdiness

 024002281  024002282  024002283

C24SA-XL/8 939.-

882 mm n° 5 1 1

Mobile roller cab with 8 drawers, with anti-tilt system, long model 70 mm 140 mm

88  024002101  024002102  024002103

70 mm 140 mm 210 mm

30 kg 35 kg 35 kg

Can accommodate up to s 6 thermoformed tray in one drawer

n° 6 2

m

5m

44

1035 mm

30 kg 35 kg

970 mm

new item

970 mm

• 7 drawers (882x367 mm), with ball bearing slides.

• Sturdy ABS worktop, with 6 tool trays.

• Sturdy nylon front, with integrated label holder.

• Drawer bases protected by foamed rubber mats.

• 4 castors 125 mm in Ø: 2 fixed and 2 steering (one with brake).

• Front centralized safety lock.

• Integrated side bottle holder.

m

5m

44

1035 mm



1100 kg

C24SL 855.-

Castors with metal cores for enhanced sturdiness

80

Mobile roller cab with 7 drawers and side tops

970 mm

• 7 drawers (588x367 mm) with ball bearing slides.

• 4 castors 125 mm in Ø: 2 fixed and 2 steering (two with brakes).

• Front centralized safety lock.

• Multi-ply wood worktop with holes for a vice (1599F/100, to be ordered separately).

• Side compartment with vertically adjustable top.

• Integrated paper roll holder.

• Double rear bottle holder.

5 56

mm

1050 mm

n° 5 1 1

70 mm 140 mm 210 mm

25 kg 30 kg 30 kg

8 Ac_Neutro_Exp_1_8.indd 8

20/11/15 14:19



1200 kg

 028000301  028000302  028000303

C28 1 820.-

130

• 10 drawers (588x367 mm) with ball bearing slides.

• Quick, safe system for opening and closing drawers, with nylon and fibreglass front.

• 5 side drawers.

• 5 front drawers.

• Drawer bases protected by foamed rubber mats.

• 4 high-capacity castors 150 mm in Ø: 2 fixed and 2 steering (with brakes).

• 2 centralised safety locks.

• Multiply wood worktop with holes for a vice (1599F/150, to be ordered separately) • Side compartment with foldaway door with lock.

• 135-mm-high storage compartment with plastic-covered base.

945 mm 80 0m m

SuperTank trolley with worktop and 10 drawers

1235 mm

n° 8 2

70 mm 210 mm

25 kg 30 kg

“Endurance” workbench with 1 cab with six drawers

 059000001  059000021  059000041

C59A 1 110.-

115

• Worktop made from multi-ply wood with holes for vice item 1599F/125 (to be ordered separately).

• 6 drawers (588x367 mm) with ball bearing slides: 4 drawers, 70 mm high 1 drawer, 140 mm high 1 drawer, 280 mm high.

• Drawers protected by foamed rubber mats.

• Hard-wearing nylon drawer front.

• Roller cabs can accommodate thermoformed trays.

• Front centralized safety lock.

• Lower object shelf.

• Can be fitted with paper roll holder (2400S-R/PC) 1500 and bottle holder (2400S/PF), to be ordered separately. kg



n° 70 mm 140 mm 280 mm

25 kg 30 kg 35 kg

930 mm

4 1 1

m

0m

70

2000 mm

9 Ac_Neutro_Exp_9_16.indd 9

20/11/15 15:25



new item

 056000251  056000252  056000253

1200 kg

C56W 820.-

85

Workbench with wood top

930 mm 72 0m m

• Multi-ply wood worktop (40 mm thick) • Steel frame with 6 supporting legs • Matches panel tool holder C57P; cannot be fixed to worktop.

• Two drawers with locks.

• Can be fixed to floor.

2000 mm



 056000201  056000202  056000203

1200 kg

C56 620.-

82

Workbench



930 mm 64 0m m

• Worktop made of painted sheet metal with external edge.

• Steel frame with 6 supporting legs.

• Two drawers with lock.

• Can be fixed to floor.

2000 mm

200

 051000001  051000002  051000003

kg

C51 195.-

21

• 3 tops covered in antislip ribbed rubber.

• Two fixing options for central worktop.

• Four castors Ø 100 mm: 2 fixed and 2 steering (1 with brake).

• Static load capacity: 200 kg (distributed between 3 shelves).

900 mm 45 0m m

Trolley

800 mm

10 Ac_Neutro_Exp_9_16.indd 10

20/11/15 15:25

C20L

 021200002

55.Five-section cantilever tool box, made from sheet metal, empty

 550x200x210 mm

new item 2080/V12  020800000

36.Organizer tool case with 12 removable tote-trays, empty

Removable, folding clear tote-trays, for immediate recognition of contents Can be hooked to belt loops

CP15

 021150201

32.-

CP15L

 021150202

42.-

 300x330x145 mm

Tool box, made from plastic, removable tote-tray and tool trays, empty

• 1 tool tray built into cover • 2 removable tool trays with adjustable partitions • 1 interior tote-tray with adjustable partitions • Carrying capacity: 30 kg 

445x240x250 mm



558x277x270 mm

Tool box, long series, made from plastic, removable tote-tray and tool trays, empty

• 3 tool trays built into cover with adjustable partitions • 1 interior tote-tray with adjustable partitions • Carrying capacity: 30 kg

11 Ac_Neutro_Exp_9_16.indd 11

20/11/15 15:25

C4

 021040000

69.Tool basket made of technical fabric, empty

• Removable internal tool panel • Internal and external pockets and elastic tool holder • Sturdy waterproof base with rubber feet • Supplied with shoulder strap  360x330x260x mm

C5

 021050000

79.Tool rucksack, made of technical fabric, empty • Removable interior tool panel • 6 functional exterior pockets • 2 capacious interior pockets • Waterproof plastic base • Double safety lace for fixing rucksack to shoulders • Ergonomic padded back

 500x400x180 mm

C6T

 021060010

139.Tool rucksack, made of technical fabric, with castors, empty

• Telescopic handle for easy transport • Built-in castors with dustproof cover for use as rucksack • 2 removable tool panels • 5 functional exterior pockets • One capacious interior PC pocket

 480x370x220 mm

12 Ac_Neutro_Exp_9_16.indd 12

20/11/15 15:25

C7

 021070000

149.Technical fabric tool bag, empty • 2 removable interior tool panels • Interior PC pocket • 2 exterior front pockets • Interior bottom made of plastic, with removable partitions

 440x370x170 mm

C8

 021080000

165.Technical fabric tool trolley, empty

• Telescopic carrying handle • 2 removable interior tool panels • 2 exterior front pockets • Can accommodate tool box item C10S

 470x370x280 mm

C10S

C10S

 021100001

C8

75.Technical fabric tool box, empty

• Hard frame • Double bottom. Bottom can be removed for increased bag capacity • Tilting handle for easier access to tools • Elastic tool bands and interior and exterior pockets • Cover • Tool tray included in double bottom



420x220x250 mm

13 Ac_Neutro_Exp_9_16.indd 13

20/11/15 15:26

C10

 021100000

95.Technical fabric tool box, empty

• Hard frame • Double bottom. Bottom can be removed for increased bag capacity • Tilting handle for easier access to tools • Elastic tool bands and interior and exterior pockets • Cover • Tool tray included in double bottom



520x220x250 mm

C11

 021110000

59.Technical fabric tool box

• Hard water resistant plastic base • Elastic bands and interior and exterior tool pockets • Document holders built into double bottom of cover  400x240x220 mm

C12

 021120000

125.Technical fabric tool bag, empty

• Removable interior tool panel • Elastic tool bands and capacious interior and exterior pockets • Hard, waterproof base with rubber feet • Can be used with trolley C8  500x370x270 mm

r easier access fo t n o fr at s en p o Bag ce to tools at workpla 14 Ac_Neutro_Exp_9_16.indd 14

20/11/15 15:26

Assortments L  059880410 XL  059880411

5988VA/T 1 129.-

T199 T202

Assortment of 107 tools in thermoformed trays

T80

T52 T33

T15

T145 T153 T131 T234

T16

T63

VP5

L  059880420 XL  059880421

5988VI/T 989.Assortment of 108 tools in thermoformed trays

T199 T202

T52 T33 L  059880440 XL  059880441

5988U/TP

T80

T15

T145 T153 T131 T234

T16

T236 T289 VP4 VP4

T83

T145 T153 T132 T234 T52 T55

Assortment of 90 tools in thermoformed trays

779.-

T10

T33 T220

15 Ac_Neutro_Exp_9_16.indd 15

20/11/15 15:27

L  059880428 XL  059880429

5988U/MP

Assortment of 91 tools in soft thermoformed tray

785.-

L

M15 M33

M199 M202

M50

M83

M132 M153 M234 M145

new item L  059880430 XL  059880431

5988 U6/MP 1 830.Assortment of 214 tools in soft thermoformed tray

M10

M30

M210

M230

M130

M100

new item

Soft Module Systems M10

 024500010

299.-

42 6-7-8-9-10-11-12-13-14-15-16-17-18-1920-21-22-24-27-30-32-36 mm

M30

 024500030

245.-

55 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 21x23-24x27-30x32 mm 90 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 21x23-24x27-30x32 mm 96BPC/SC9 1,5-2-2,5-3-4-5-6-8-10 mm

16 Ac_Neutro_Exp_9_16.indd 16

20/11/15 15:28

m e t i w e n

Thermoformed trays M121

M60

 024500121

 024500060

235.-

710.-

  96T 2-2,5-3-4-5-6-7-8-10 mm  97BTX/SC8 T9-T10-T15-T20-T25-T27-T30-T40  944BX 5-6-7-8-10-13 mm

M63

 024500063

12L-14-14L-16-18 mm  920BP 5L-6L-8L-10L-5XL 920ES 7-9-10-11-12L-14L-16L6XL-8XL mm 7XL-9XL-10XL-11XL 920TX T20-T25-T27-T30-T40T45L-T50L-T55L-T60L-T70L 12XL-14XL-16XL mm  920XZN 4-5-6-6L-8-8L-10-10L-12- 920/36A

M130

 024500130

240.-

255.-

 952 7-8-10-12-13-14-17-19 mm  1032 180 mm  1034 170 mm  1036 175 mm  1038 175 mm 1048 250 mm 1052 240 mm  1082BM 160 mm

M100

 024500100

699.-

 895/1 - 895/3 - 895/6  900 4-4,5-5-5,5-6-7-8-9-1011-12-13-14 mm  900L 5-6-7-8-9-10-11-12-13 mm  900ME 3-4-5-6-7 mm  900LP 0,8x4-1x5,5-1,2x6,5-1,2x8 mm  900PH PH1-PH2-PH3-PH4  900TX T10-T15-T20-T25-T27-T30-T40 900/20 50 mm - 900/20L 100 mm 900/21 150 mm 900/25 - 900BG/30 - 900/42  900/55

1098 220 mm 1112 250 mm 1128BM 1150BM 180 mm 1166BM 160 mm 1168BM 160 mm

M210

 024500210  920A 8-10-11-12-13-14-15-16-1718-19-20-21-22-23-24-26-2728-30-32 mm 920/15 - 920/25 920AN/125 125 mm 920AN/250 250 mm 920/42  920/55  920FTX 10-12-14-16-18-20-22-24 mm  920AL 10-12-13-14-15-16-17-1819-21-22 mm

105.-

 1201 2,5x50-3x75-4x100 1202N PH1X30 mm 5,5x125-6,5x150-8x200 mm  1207TX T6-T7-T8-T9-T10-T15-T20 1201N 4x30 mm T25-T27-T30-T40-T45  1202 PH0x60-PH1x80-PH2x100-  1253 PH3x150 mm

M230

M120

 024500230

 024500120

255.-

765.-

  920A 10-11-12-13-14-15-16-17-1819-20-21-22-24-26-27-30-32 mm 920AN/125 125 mm 920AN/250 250 mm 920/25 - 920/42  920AL 10-12-13-14-15-16-17-18-1922-24-27-30-32 mm

 920FTX 10-12-14-16-18-20-22-24 mm  920/55  920PE 5-5L-6-6L-7-7L-8-8L-10-10L12-12L-14-14L  920TX T20-T25-T27-T30-T40-T45T50-T55-T60-T20L-T25L-T27LT30L-T40L-T45L-T50L

30 Ø 2-3-4 mm 31 Ø 2-3-4-5-6-8 mm 32 Ø 4 mm 34 150 mm 35 200-250 mm 36 125 mm 1370 500 g 1390 Ø 35 mm 1692 3 m

1712  1719BMA/Q 200 mm  1719BMA/T 200 mm  1719BMA/P 200 mm  1719BMA/M 200 mm  1719BMA/R 200 mm 1737 1771 18 mm

17 Ac_Neutro_Exp_17_24.indd 17

01/12/15 12:05

T10

T15

 024240010

T16

 024240015

182.-

T31

 024240016

 024240031

95.-

139.-

147.31 Ø 2-3-4-5-6 mm 32 Ø 4 mm 55 6x7-8x9-10x11 12x13-14x15 16x17-18x19 20x22-21x23 24x26-27x29 30x32 mm  96N/SC9 1,5÷10 mm

42 6-7-8-9-10-11-12-13-14 15-16-17-18-19-20-21 mm

42 6-7-8-10-11-12-13-14 16-17-18-19-21-22-24-27-30 mm

T40

42 22-24-27-30-32 mm

T46

T45

 024240040

55.-

142SN 8-9-10-11-12-13-14 15-16-17-18-19 mm

142 8-9-10-11-12-13-14 15-16-17-18-19 mm

T55

T63

 024240055

 024240063

54.-

 024240050

239.-

198.-

90 6x7-8x9-10x11-12x13 14x15-16x17-18x19 mm

T50

 024240046

 024240045

98.-

 96T 2-2,5-3-3,5-4-4,5-5-6-7-8-10 mm

T83

 024240083

186.-

230.-

 920A 10-11-12 13-14-15-16-17-18 19-20-21-22-23-24 26-27-30-32 mm 920/21 125 mm 920/22 255 mm 920/25 920/42 305 mm 920/55  275 mm

 952 7-8-10-12-13-14-17-19 mm



 97TTX T10-T15-T20 T25-T27-T30

T85

 024240085

187.-

T91

  861LP  861PE  861PH  861PZ  861TX  861RTX  861TRW  861TQS  861SP 851SR  900 900/21 900BG/30  900/55

 024240091 0,5x3-0,6x4,5-0,8x5,5-1x5,5-1,2x6,5-1,2x8-1,6x8 mm 2-2,5-3-4-5-6-8-10 mm PH0- PH1 - PH2 - PH3 PZ1 - PZ2 - PZ3 T6-T7-T8-T9-T10-T15-T20-T25-T27-T30-T40 T9-T10-T15-T20-T25-T27-T30-T40 1-2-3-4-5-6 mm 0-1-2-3-4-5-6-8 mm 4-6-8-10-12 mm 230 mm 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 150 mm 900/25 41 mm 176 mm 900/42 115 mm 125 mm 194 1/4x5/16

129. 900

4-4,5-5-5,5-6-7-8-9 10-11-12-13-14 mm  900ME 2,5-3-4-5-6-8 mm 900/20 50 mm 900/21 150 mm 900/25 900BG/30 176 mm 900/42 115 mm  900/55 125 mm



18 Ac_Neutro_Exp_17_24.indd 18

20/11/15 15:30

m

1

T92

 024240092

162. 910A 6-7-8-9-10-11-12 13-14-15-16-17-18 19-20-21-22 mm 910/21 125 mm 910/22 250 mm 910/25 910/42 210 mm  910/55 200 mm

T103

T131

 024240103

 024240131

179.-

T145

 024240145

75.-

73.-



 1032  1034  1036  1038

180 mm 170 mm 175 mm 175 mm



1084BM 1150BM 1166BM

 900L 6-7-8-9-10-11-12 mm  920AL 13-14-16-17-18-19 21-22-24-27 mm

T153

 024240153

41.1048 250 mm 1052 240 mm

T210

 024240210

23. 1201 2,5x50-3x75 3,5x100-4x125 5,5x100-5,5x150 6,5x150 mm

T234

 024240234

65.35 100-200 mm 1370 300 g 1390 ø 35 mm

T199

160 mm 180 mm 160 mm

T202

 024240199

 024240202

36.-

T205

 024240205

34. 1262 PH0x60 PH0x100 - PH1x80 PH1x120 - PH2x100 PH2x150 mm

 1260 2,5x50 - 3x75 3,5x100 - 4x125 - 5,5x100 5,5x150-6,5x150 mm

T212

 1267TX T6-T7-T8-T9 T10-T15-T20

T215

 024240212

 024240215

24.-

24. 1202 PH0x60-PH1x80 PH1x120-PH2x100 PH2x150-PH3x150 mm

T236

 1207TX T6-T7-T8-T9 T10-T15-T20

T239

 024240236

 024240239

62. 1719BMA/Q  1719BMA/T  1719BMA/P  1719BMA/M  1719BMA/R

36.-

92.200 mm 200 mm 200 mm 200 mm 200 mm

31BM ø 2-3-4-5 6-8 mm 32 ø 4 mm

19 Ac_Neutro_Exp_17_24.indd 19

20/11/15 15:31

42/SP15  000420078

124.Set of 15 combination wrenches with holder  6-7-8-9-10-11-12-13-14-15 16-17-19-22-24 mm

55/SP7  000550167

35.Set of 7 double open end wrenches with holder

 6x7-8x9-10x11-12x13-14x15 16x17-18x19 mm

42/SC9I  000420087

129.Set of 9 combination wrenches, open and offset ring ends, with compact support

 8-10-11-12-13-14-15-17-19 mm

90/S7

 000900163

49.Set of 7 double ended deep offset ring wrenchese  6x7-8x9-10x11-12x13-14x15-16x17-18x19 mm

20 Ac_Neutro_Exp_17_24.indd 20

20/11/15 15:31

Wrenches 142/SC9I  001420087

142.Set of 9 reversible ratcheting combination wrenches, with compact support

 8-10-11-12-13-14-15-17-19 mm

142SN/SC9  001420259

173.Set of 9 swivel end ratcheting combination wrenches with compact support  8-10-11-12-13-14-15-17-19 mm

192/S2

 001920070

44.Set of 2 reversible ratcheting offset bi-hex ring wrenches

8 misure in 2 chiavi 13 mm

10 mm

12 mm 19 mm

8 mm

18 mm

17 mm 16 mm

142C/A12  001420175

175.Set of 12 ratcheting combination wrenches, straight short series in case

 8-9-10-11-12-13-14-15 -16-17-18-19 mm

21 Ac_Neutro_Exp_17_24.indd 21

20/11/15 15:31

mm/inch readout

111/150

 001110015

13.L 150 mm A max 24 mm

Adjustable wrenches with scales, chrome-plated

• Movable jaw opening with right-hand rotation of pin • Head angled at 22.5 degrees, with mm and inch scale

A

111/200

 001110020

111/300

16.-

111/250

 001110025

L 200 mm A max 28 mm

19.-

 001110030

26.L 300 mm A max 35 mm

L 250 mm A max 34 mm

944BX/D6  009440056

90.Set of deep, hi-torque hexagon nut spinners long series  5-6-7-8-10-13 mm

952/D7  009520079

173.Set of 7 T-handle wrenches with swivelling hexagon sockets  7-8-10-12-13-14-17 mm

90°

45°

22 Ac_Neutro_Exp_17_24.indd 22

20/11/15 15:31

Male-end wrenches 96T/S5P  000960946

34.Set of 5 offset hexagon key wrenches with handles  2,5-3-4-5-6 mm

951/S6  009510687

85.Set of 6 T-handle wrenches with three hexagon male ends  2,5-3-4-5-6-8 mm

97TTX/S6  000970795

52.Set of 6 ball head offset key wrenches for Torx® head screws, with handles  T10-T15-T20-T25-T30-T40

96/BGS7  000960367

23.Set of 7 offset hexagon key wrenches  1,5-2-2,5-3-4-5-6 mm

23 Ac_Neutro_Exp_17_24.indd 23

20/11/15 15:31

wrench locking system

96/SC9  000960374

12.Set of 9 offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm

96BPC/SC9  000960354

23.Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm

96LBP/SC9  000961354

Extra-long model

19.Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm

+30%

97BTX/SC8  000970164

44.Set of 8 ball head offset key wrenches, for Torx® head screws  T9-T10-T15-T20-T25-T27-T30-T40

24 Ac_Neutro_Exp_17_24.indd 24

20/11/15 15:32

Bits  860LP 0,5x3 - 1,0x5,5 - 1,2x6,5 mm  860PH PH1 - PH2 (x2) - PH3  860PZ PZ1 - PZ2 - PZ3

860MIX/A10  008600900

16.-



882M1  1/4” -  1/4”

Set of 10 bits with magnetic bit holder in plastic case

new item 860/58K



Rotating the handle clockwise and anticlockwise will make the bit turn quickly

 008609884

55.Bit ratchet with rotating handle

860/C27  008600880

Bit fits both sides, for screwing or unscrewing



52.Set of 25 bits,1 connector and 1 reversible ratchet in plastic case

 860LP 0,5x3-1,0x5,5-1,2x6,5 mm  860PE 2-2,5-3-4-5-6-mm  860PH PH1-PH2(x2)-PH3  860TX T6-T8-T10-T15-T20-T25-T30-T40  860PZ PZ1 - PZ2(2x) - PZ3

862F/A7  008620950



25.Set of 7 magnetic bits, hexagon sockets, in plastic case  862F 5,5-6-7-8-10 12-13 mm

860/55 100 mm 892/0

25 Ac_Neutro_Exp_25_32.indd 25

20/11/15 15:44

1/4” drive reversible ratchet with rotating handle • Socket release button • Ring nut reversal system on ratchet head • Bi-material handle

900/58  009000884

Rotating the handle clockwise and anticlockwise will make the bit turn quickly



53.-

910/58  009100884



63.-

920/58  009200926



72.-

new item 900/C39-R  009000938

129.-

Ø mm

A mm

126

28

28,5

A mm

900/58

ø mm

910/58

222

37

38,5

920/58

281

42,5

45

Operating system with rotating handle Assortment of 11 hexagon sockets, 21 bits and 7 accessories • Reversible ratchet

with rotating handle

    

0,6x4,5-1,2x6,5-1,2x8 mm 2,5-3-4-5-6 mm 1-2-3 1-2-3 10-15-20-25-27-30-40 mm

 5-5,5-6-7-8-9-10-11-12-13-14 mm 50 mm 100 mm



861LP 861PE 861PH 861PZ 861RTX 892/0 895/1 900 900/20 900/20L 900/25 900BG/30C 900/58

L mm

   150x95x50 mm

26 Ac_Neutro_Exp_25_32.indd 26

20/11/15 15:45

Sockets



900/C12MR  009000962

Assortment of 12 hexagon sockets, 20 bits and 7 accessories in foam tray, in metal case

149.-

   

0,5-0,8-1-1,2 mm 3-4-5-6-8 mm PH0-PH1-PH2-PH3 T8-T10-T15-T20-T25-T30-T40

 4-5-5,5-6-7-8-9-10-11-12-13-14 mm 50 mm 150 mm

 350x150x50 mm

910A/C16HR  009100935

910/21 910/22 910/25 910/42 910/58



Assortment of 16 hexagon sockets and 5 accessories in foam tray, in metal case

197.910A

Reversible ratchet with rotating handle

861LP 861PE 861PH 861TX 895/1 900 900/20 900/21 900/25 900/42 900BG/30 900/58

 6-7-8-9-10-11-12-13-14 15-16-17-18-19-21-22 mm 125 mm 250 mm

 335x145x60 mm

920A/C17MR  009200937

220.-



Assortment of 17 hexagon sockets and 5 accessories in foam tray, in metal case 920A 920/21 920/22 920/25 920/42 920/58

 10-11-12-13-14-15-16-17-18-19 20-21-22-24-27-30-32 mm 125 mm 255 mm

 420x185x60 mm

27 Ac_Neutro_Exp_25_32.indd 27

20/11/15 15:46



900/C39

Assortment of 11 hexagon sockets, 21 bits and 7 accessories in plastic case

 009000937

105.    

0,6x4,5-1,2x6,5-1,2x8 mm 2,5-3-4-5-6 mm 1-2-3 1-2-3 10-15-20-25-27-30-40 mm

 5-5,5-6-7-8-9-10-11-12-13-14 mm 50 mm 100 mm

 150x95x50 mm



900/C12M  009000963

Assortment of 12 hexagon sockets, 20 bits and 7 accessories in foam tray, in metal case

127.861LP 861PE 861PH 861TX 895/1 900 900/20 900/21 900/25 900/42 900BG/30 900/55



861LP 861PE 861PH 861PZ 861RTX 892/0 895/1 900 900/20 900/20L 900/25 900BG/30C 900/55

   

0,5-0,8-1-1,2 mm 3-4-5-6-8 mm PH0-PH1-PH2-PH3 T8-T10-T15-T20-T25-T30-T40

 4-5-5,5-6-7-8-9-10-11-12-13-14 mm 50 mm 150 mm

 350x150x50 mm



910A/C16

Assortment of 16 hexagon sockets and 5 accessories in metal case

 009100936

169.910A 910/21 910/22 910/25 910/42 910/55

 6-7-8-9-10-11-12-13-14 15-16-17-18-19-21-22 mm 125 mm 250 mm

  335x145x60 mm

28 Ac_Neutro_Exp_25_32.indd 28

20/11/15 15:46



920A/C17M  009200924

Assortment of 17 hexagon sockets and 5 accessories in foam tray, in metal case

193.-

 10-11-12-13-14-15-16-17-18-19 20-21-22-24-27-30-32 mm 125 mm 255 mm

920A 920/21 920/22 920/25 920/42 920/55



 420x185x60 mm



902A/C22  009020807

Assortment of 22 hexagon sockets and 6 accessories in metal case

219.-



900 900/20 900/25 900/55



920A 920/21 920/25 920/55

 5-5,5-6-7-8-9-10-11-12-13 mm 50 mm

 10-13-14-15-17-18-19-22-24 27-30-32 mm 125 mm

  420x185x60 mm



928A/C12

Assortment of 12 hexagon hand sockets and 5 accessories in metal case

 009280955

499.928A 928/21 928/22 928/25 928/42 928/55

 22-24-27-30-32-34-36-38-41 46-50-55 mm 200 mm 380 mm

  530x220x80 mm

29 Ac_Neutro_Exp_25_32.indd 29

20/11/15 15:46

Click-type torque wrenches with reversible ratchets for right-hand tightening torque accuracy: ±4%

UNI EN 26789 ISO 6789



8÷60 Nm L= 305 mm

606/6

 006060105

149.-

Nm  20÷100 L= 345 mm

606/10X

Nm  40÷200 L= 440 mm

Nm  60÷330 L= 560 mm

 006060120

 006060130

606/20

 006060111

606/30

165.-

154.-

187.-

Click-type torque wrenches with push-through ratchets, for right-hand and left-hand tightening, torque accuracy: ±4%

UNI EN 26789 ISO 6789

• scale increased by 60% for improved visibility and setting accuracy • torque adjusting speed increased by 40% • handle and lens materials resistant to all chemical substances used in automotive sector, industry and aviation • red colour of o-ring indicates that wrench is unlocked and torque can be adjusted • when not in use, set torque to lowest value of torque wrench range • recalibration reminder shows time to recalibrate wrench (4 steps: 3, 6, 9 and 12 months)

Nm  40÷200 L= 470 mm

667N/20  006670020

174.-

Nm  60÷300 L= 598 mm

667N/30  006670030

195.-

new item

Nm  80÷400 L= 711 mm

667N/40  006670040

459.-

30 Ac_Neutro_Exp_25_32.indd 30

01/12/15 12:07

Torque wrenches electronic direct reading torque wrench, for right-hand and left-hand tightening, torque accuracy: ± 2%/± 3% Nm 12÷60 20÷100 40÷200 68÷340

599DGT/6 599DGT/10X 599DGT/20 599DGT/30



Kgfm 1,2÷6 2÷10 4÷20 6,8÷34

lbf.ft 8÷44 15÷80 30÷150 58÷280

 3/8" 1/2" 1/2" 1/2"



L mm 413 413 520 639

g 800 910 1500 2350

599DGT/10X

599DGT/6

 005990003 005990010 005990020 005990030



new item



599DGT/20

599DGT/30

263.-

259.-

255.-

• Reversible ratchet • LCD display • Unit of measurement: Nm, ft.lb, in.lb, kgcm • Dual approaching/stopping signal • Power supply: 2 AA 1.5V batteries (included)

279.-

• For tightening screws to values set by measuring torsion angle • Complete with buzzer and LED indicators informing user that preset angle has almost or finally been reached • For right-hand and left-hand tightening • Angle accuracy: +/-2% • Resolution: 0.1° • Up to 9 angle values can be preset • Up to 50 measurements can be preset • Supplied in an ABS case • Power supply: 2 AAA-size batteries (included)

601C

 006010100

129.Digital torque angle indicator

560/C6

560/C12

005600160

 005600210

555.-

6

799.-

7

Torque multipliers for right-hand and left-hand tightening in plastic case

Torque multipliers for right-hand and left-hand tightening in plastic case

ratio 12:1

ratio: 6.5:1 complete with straight reaction lever and reaction foot

Nm

Kgfm

lbf.ft





1500

150

1106

1/2”

3/4”

complete with straight reaction lever and reaction foot

 400x260x110 mm

Nm

Kgfm

lbf.ft





2500

250

1844

1/2”

1”

31 Ac_Neutro_Exp_25_32.indd 31

20/11/15 15:47

Pliers 1082BM 160 mm

1169BM/D3  011690123

63.Set of 1 combination pliers, 1 long needle nose pliers and 1 diagonal cutting nippers

1150BM 180 mm

1166BM 160 mm

1009L/DP-S2

45°

 010090060

39.Set of 2 extra-long, knurled double swivel nose pliers

• Suitable for jobs in hard-to-access areas

L 340 mm

1057A

 010570124

29.Automatic self-locking pliers with adjustable force 38 mm

32 Ac_Neutro_Exp_25_32.indd 32

01/12/15 12:09

Slip joint pliers, push button alignment

mm

Max mm

ø

 Max mm

180 240 300

30 36 50

29 35 48

L

• Quick, accurate adjustment by pressing push button • No accidental misadjustment • Heat-treated jaws

1047/180

1047/240

 010470180

 010470240

 010470300

39.-

27.-

27.-

1048

ne

1047/300

9-position model

 010480015

19.Slip joint pliers, boxed joints

• slip-proof double layer PVC coated handles

L 250 mm

1031/S4  010310000

1038 175 mm  19 ÷ 60 mm

69.Set of 4 circlip pliers

1034 170 mm  19 ÷ 60 mm

1032 180 mm  19 ÷ 60 mm

1036 175 mm  19 ÷ 60 mm

33 Ac_Neutro_Exp_33_40.indd 33

23/11/15 14:23

Screwdrivers

1203/D8P

1203/D10N

 012030018

 012030019

25.Set of 8 screwdrivers

1201  2,5x50-3x75-4x100-5,5x100-6,5x150 mm 1202  PH0x60-PH1x80-PH2x100 mm

33.Set of 10 screwdrivers

1201  2,5x50-3x75-4x100-5,5x150-6,5x150 mm 1202  PH0x60-PH1x80-PH2x100 mm

1263/D10  012630010

 012630008

49.-

39.1260  2,5x50-3x75-4x100-5,5x125-6,5x150 mm 1262  PH0x60-PH1x80-PH2x100 mm

 012070207

25.Set of 7 screwdrivers 1207TX  T6-T8-T10-T15-T20-T25-T30

1201N  4x30 mm 1202N  PH1x30 mm

1263/D8

Set of 8 screwdrivers

1207TX/D7

Set of 10 screwdrivers 1260 1262 1260N 1262N

 3x75-3,5x100-4x125-5,5x150-6,5x150 mm  PH0x60- PH1x80-PH2x100 mm  4x30 mm  PH1x30 mm

1267TX/D7  012670307

37.Set of 7 screwdrivers

1267TX  T6-T8-T10-T15-T20-T25-T30

1293/D8  012930403

54.Set of 8 screwdrivers

1201  3x75-4x100-5,5x100 6,5x150-8x150 mm 1202  PH0x60-PH1x80-PH2x100 mm

1243/D7  012430017

60.Set of 7 screwdrivers

1241  5,5x100-6,5x125-8x150-10x200 mm 1242  PH1x100-PH2x100-PH3x150 mm

34 Ac_Neutro_Exp_33_40.indd 34

23/11/15 14:24

Hammers and chisels 31BM/D6 î Ź 000310420

79.Set of 6 pin punches with handles

Ă˜ 2-3-4-5-6-8 mm

38/B6

30: Ă˜ 2-3 mm

î Ź 000380006

32: Ă˜ 4 mm

42.-

34: 125-150 mm

Set of 6 drift punches, centre punches, flat chisels and cape chisels, in wallet

1370

36: 150 mm

Engineer’s hammer, wooden shaft

30

1390

1392

Soft face hammers, wooden shafts

Dead-blow hammers, with interchangeable plastic faces, steel shafts

â‚Ź

î ”g

î Ź

1370/200

200

013700052

1370/300

300

013700053

1370/500

500

013700055

1370/800

800

013700058

1370/1000

1000

013700060

1370/1500

1500

013700065

â‚Ź 9,80

â‚Ź 11,30

â‚Ź 13,80

â‚Ź 18,00

â‚Ź 21,00

â‚Ź 24,50

Ă˜ mm

î Ź

â‚Ź

1390/22

22

013900022

1390/28

28

013900028

1390/35

35

013900035

1390/45

45

013900045

1390/60

60

013900060

â‚Ź 13,40

â‚Ź 17,00

â‚Ź 22,70

â‚Ź 37,00

â‚Ź 63,00

Ă˜ mm

î Ź

â‚Ź

1392/30

30

013920030

1392/35

35

013920035

1392/40

40

013920040

1392/50

50

013920050

1392/60

60

013920060

â‚Ź 36,00

â‚Ź 38,00

â‚Ź 43,00

â‚Ź 52,00

â‚Ź 79,00

35 Ac_Neutro_Exp_33_40.indd 35

23/11/15 14:24

Patented

g Double-acting cuttinr

- effort + powe

new item

ar stress

rum reduces of 20% she

a special cam on the fulc

1128BAX  011280088

20.-

2

Double-acting electricians’ scissors, with milling profiles in DLC-coated stainless steel

+ hardness - coefficient of friction

3

DLC coating:

DLC (diamond-like carbon) is an innovative carbon-based coating: the high hardness and low coefficient of friction arise from the simultaneous presence of carbon on the surface in the form of graphite, and diamond.

Profile and mill:

designed to enlarge holes on plastic, from 13 mm to 24 mm.

• High blade surface hardness (resistance to abrasion and wear) • Low coefficient of friction (smoothness and anti-adherence) • Anti-loose eccentric pin • With articulated plastic case

Large handles with pipe throttling grooves

1130BMX

Spring m

echanis

new item

 011300001

m

16.Multiuse scissors, straight blades made in stainless steel, with microteeth

1719BMA8/S5  017190070

0m

m

55.-

20

Set of 5 second cut files

plastic handles

T

Q P R

M

36 Ac_Neutro_Exp_33_40.indd 36

23/11/15 14:24

Cutting tools new item 1778SCL  17780089

16.-

Foldaway knife with soft carbon look finish hardened steel blade in case

1778SOS  017780080

anodized aluminium

handle

anodized aluminium

handle

19.Car service knife with window breaking hammer and seat belt cutter features in case

1777T

 017770030

16.Foldaway knife with trapezoidal stainless steel blade, 5 spare blades

1771

 017710000

5,50.Utility knife, 18 mm,supplied with 3 blades

1770BM  017700050

9.Utility knife with automatic blade locking mechanism, 6 blades

37 Ac_Neutro_Exp_33_40.indd 37

23/11/15 14:24

Drilling and threading tools 412/SP19P

415CO/SP19A

 004120429

 004150440

98.-

45.-

Set of 19 twist drills with cylindrical shanks, HSS-CO 5%

Set of 19 twist drills with cylindrical shanks, HSS, entirely ground glossy finishing

• For drilling holes into STAINLESS steel, alloy steel, cast iron, mild steel, light alloys

ø 1÷10 x 0,5 mm

Ø 1÷10 x 0,5 mm  115x170x40 mm

 115x170x40 mm

new item 429/C7  004290207

312.-

425P/SP3

• with white rin • increased surfg ac and wear resist e hardness reduced chip stance, icking

 004250610

new item

185.Set of 3 stepped drills, HSS-G, extremely effective sharpening

Set of 7 machine taps for clearance holes, coarse pitch threads, HSS-CO

Ø 4÷12; 4÷20; 4÷30 mm

M 3x0,5 - 4x0,7 - 5x0,8 - 6x1 - 8x1,25 10x1,5 - 12x1,75 R≤1000N/m2 HV 820÷850

 100x145x40 mm  100x145x40 mm

446/C110

Assortment of chrome-steel taps and dies, metric thread, and accessories for car repair jobs in wooden case

 004460060

624.I III

430 M mm

2x0,4 3x0,5 4x0,7 5x0,8 6x1 7x1 8x1,25 9x1,25 10x1,5 11x1,5 12x1,75 14x2 16x2

433 M mm

6x0,75 - 7x0,75 8x0,75 -8x1 9x0,75 - 9x1 10x0,75 -10x1 10x1,25 - 11x0,75 11x1 - 11x1,25 12x0,75 - 12x1 12x1,25 - 12x1,5 14x1 - 14x1,25 14x1,5 - 16x1 16x1,5 - 18x1,5

440/440A M mm 2x0,4 3x0,5 4x0,7 5x0,8 6x1 7x1 8x1,25 9x1,25 10x1,5 11x1,5 12x1,75 14x2 16x2

441/441A M mm

6x0,75 - 7x0,75 8x0,75 -8x1 9x0,75 - 9x1 10x0,75 -10x1 10x1,25 - 11x0,75 11x1 - 11x1,25 12x0,75 - 12x1 12x1,25 - 12x1,5 14x1 - 14x1,25 14x1,5 - 16x1 16x1,5 - 18x1,5

435/0 444/1 436/1 435/3 444/2

 500x337x60 mm

38 Ac_Neutro_Exp_33_40.indd 38

23/11/15 14:24

Measuring tools Max 150 mm

1651DGT  016510111

A Max mm

L mm

150

225

Digital vernier made from hardened stainless steel in hard plastic case

65.-

• Reading to 0.01 mm • Screw slider locking • Mm/inch conversion

L

Max 200 mm

1651LDGT  016510112

mm 0,01 0,0005

”

A

104.-

A Max mm

L mm

200

285

DIN 862 UNI EN ISO 13385-1

Measuring tapes shock-resistant bimaterial ABS casings, steel tapes, precision class II

Lm

S mm

1692/2

2

16

 016920052

1692/3

3

16

016920053

1692/5

5

18

016920055

1692/8

8

25

016920058

1695XS  016950250

9.-

€

€3,50.5,70 €3,50.7,20 5.€ 10,40 9.€ 15,00

Pocket spirit level with magnetic V-shaped base made from profiled aluminium 2 unbreakable vials accuracy: 1mm/m

• Complete with clip

Spirit levels with magnetic bases made from anodized profiled aluminium, 2 unbreakable vials accuracy: 1 mm/m

new item

L 200 mm H 49 mm S 22 mm

1696B200 23.-

S

Ideal for pipes and round sections in general

48,5 mm

1692

 016960202



70 mm

S H

L

L 300 mm H 49 mm S 22 mm

1696B300  016960203

25.-

L 400 mm H 49 mm S 22 mm

1696B400  016960204

26.-

39 Ac_Neutro_Exp_33_40.indd 39

01/12/15 12:11

1500 Two-leg universal pullers

1500/1 1500/2 1500/3 1500/4

Carico Kg

A min ÷ Max

 mm



4500

25÷ 80 mm

17

015000301

4500

25÷ 130 mm

17

015000302

6000

50÷ 160 mm

22

015000303

6000

60÷ 200 mm

22

015000304

€ 52.€ 62,00 53.€ 65,00 90.€ 105,00 127.€ 148,00

A

1501 L

Thin leg pullers Carico Kg

1501/1 1501/2 1501/3

A min ÷ Max

L  mm mm



€ 126.€ 145,00 129.€ 155,00 134.€ 160,00

3500

25÷ 130 mm 100 17

015010101

3500

25÷ 130 mm 200 17

015010102

3500

25÷ 130 mm 250 17

015010103

2,00 mm 

A

1517 Three-leg self-locking pullers • Simultaneous leg opening.

• Self-locking effect • Double nut • Patent pending.

Carico Kg

A min ÷ Max

6000

18÷90 mm

22

19 015170000

6000

25÷150 mm

22

19

015170010

6000

40÷200 mm

22

19

015170020

8000

50÷ 260 mm 30

27

015170030

1517/90 1517/150 1517/200 1517/260

  mm mm



€ 174.€ 185,00 182.€ 198,00 207.€ 227,00 228.€ 255,00

A

40 Ac_Neutro_Exp_33_40.indd 40

23/11/15 14:25

Pullers 1428/SB11  014280111

163.Set of pullers for damaged nuts quare drive with support

  8-10-11-12-13-14 mm   15-16-17-18-19 mm  24 m

m

1545/C5M  015450011

333.Puller 1542/1 with 5 extractors 1544 A mm

C mm

1544/1

9÷12

0,80

1544/2

13÷17

1,15

1544/3

16÷21

1,70

1544/4

20÷25

1,65

1544/5

25÷30

2,00

 265x180x45 mm

C

A

35÷75 m

m

1547/C6  015470006

163.Dummy ball bearing extractors • quick, safe extraction

Bearings 1547/1 6011-6014, 6206-6211, 6303-6308, 6403-6405 1 1547/2 6004-6010, 6200-6205, 6300-6304

 420x185x60 mm

41 Ac_Neutro_Exp_41_48.indd 41

20/11/15 16:08

334

 003340001

19.Pipe cutter for copper and light alloy pipes

ø 3÷30 mm 1/8”÷1”1/8

342

 003420030

ø 0÷42 mm 1”5/8

33.Ratchet-type shears for plastic pipes

351C

 003510010

88.Pipe cutter and tube flaring tool in plastic case

334 ø 3÷30 mm 1/8”÷1”1/8

350 ø 4÷14 mm

351P ø 4-4,75-6-8-10-12-14 mm  180x117x44 mm

42 Ac_Neutro_Exp_41_48.indd 42

20/11/15 16:08

Plumbing tools 388C/C8  003880200

325.Pipe bender with 7 forms, made of aluminium, for soft copper and light alloy pipes in plastic case  400x330x110 mm

Ø mm 10,12,14,16,18,20,22

Pipe wrenches, Swedish pattern, 45° slim jaws L= 320 mm ø max 1” gas ø max 34 mm

L= 410 mm ø max 1” 1/2 gas ø max 49 mm

L= 550 mm ø max 2” gas ø max 60 mm

378/320

378/410

378/550

 003780032

35.-

 003780041

46.-

 003780055

74.-

Pipe wrenches, Stillson pattern

L= 350 mm ø max 1” 1/2 gas ø max 49 mm

360/350  003600035

25.-

L= 450 mm ø max 2” gas ø max 60 mm

360/450  003600045

53.-

L= 600 mm ø max 2” 1/2 gas ø max 76 mm

360/600  003600060

59.-

43 Ac_Neutro_Exp_41_48.indd 43

20/11/15 16:08

1149F

 011490010

11.-

1609B

 016090101

211.-

front wire stripping pliers with cutting blade, self-adjusting

 0,2÷6 mm2 28÷17 AWG

Mechanical crimping pliers

• For noninsulated copper terminals, 10÷120 mm² • Antislip rubber handle • Internal “H” section pin for unparalleled punch smoothness • Made from burnished steel

L 600 mm

 10÷120 mm2

1606A/C9  016060100

97.Crimping pliers for tubular terminals 1606A with assortment of 450 terminals

 420x350x35 mm

1256/C36-2  012560100

44.Bi-material microscrewdriver with 36 interchangeable 4-mm bits and magnetic extension

1256TX 1256RTX 1256LP 1256PE 1256PH 1256PZ 1256/20 1256/30

For precision jobs

 T3-T4-T5-T6-T7-T8-T9-T10-T15  T6-T7-T8-T9-T10  0,8-1,2-1,5-1,8-2-2,5-3-3,5-4 mm  0,7-0,9-1,3-1,5-2 mm  PH000-PH00-PH0-PH1  PZ000-PZ00-PZ0-PZ1

 130x60x35 mm

44 Ac_Neutro_Exp_41_48.indd 44

20/11/15 16:08

Electrotechnics 1257LPH/S8  012570210

42.Set of 8 micro-screwdrivers for slotted head screws and Phillips® screws in hard case  1257LP:0.4x2; 0.4x2.5; 0.5x3; 0.6x3.5; 0.8x4mm  1257PH:PH00; PH0; PH1

1760/OHM  017600025

 180x117x44 mm



Suitable for hybrid and electric vehicles

585.Multimeter/megohmmeter for high voltage insulation testing. TRUE RMS indicator AC/DC voltage: AC/DC current: Resistance: Meg OHM: Capacity: Frequency: Temperature: Diode test: Continuity test:

Measuring range 50mV - 1000V 0.01μA - 10A 0.01Ω - 50MΩ 0.01 - 5000MΩ 5nF - 10mF 50Hz - 100 MHz -50 °C - +1350 °C 3V dc <30 Ω

Base accuracy ±0.06% - ±0.1% rdg ±0.5% - ±1% rdg ±0.2% - ±2% rdg ±4% rdg. max current 1mA ±1.5% - ±3% rdg ±0.02% - ±0.1% rdg ±0.5% rdg

tion IP67 c te ro p r te a •W up to 1000V • Protection accidental falls up to 2 m • Tested for inlets • Autoranging lit, blue • Protected ct reading display, back d) • Self-power down • Large dire perature probe (include d operating comfort • K type tem inal base for enhance , 1 m long inals, 1000V00V/ CAT III 1000V • Rubber term rm te d te la u s • Double in a soft case • CAT IV 6 • Supplied inctive value TRUE RMS • Actual effe

1760/RMS  017600020



AC/DC voltage AC/DC current Resistance Capacity Frequency Temperature Diode test Continuity test

Measuring range 110mV – 600V ±0.8% 110μA – 10A ±1.5% 110Ω – 40MΩ ±1.2% 11nF – 40mF ±5% 1100Hz – 110 MHz ±1.2% -32°C – +1000°C ±3% 3V DC ±10% rdg

Base accuracy - ±2% rdg - ±2% rdg - ±2.5% rdg - ±10% rdg (up to 11mF) - ±1.5% rdg - ±5% rdg

<30 Ω

199.Industrial digital multimeter accurate and sturdy, in a 6-mm co-moulded shell, with antislip, shockproof outer rubber part

Shockproof: tested for falls up to 2 metres

45 Ac_Neutro_Exp_41_48.indd 45

01/12/15 12:14

 new item

Assortment of 32 insulated tools for hybrid cars, in plastic tool box with soft thermoformed tray

2115P L-MQ32  021150332

Suitable for hybrid and electric vehicles

724.89MQ

10-12 mm

850MQ

 1/4”  T7-T8-T9-T10-T15-T20 860TX/A10 T25-T27-T30-T40

920MQ/55A 1/2” 920MQ/A

 8-10-12-13-14-17-19 mm

920MQ/21 1/2” 125 mm 920MQ/22 1/2” 250 mm 1048MQ250 250 mm 1150MQ 180 mm 1164MQ160  160 mm 1272MQ

 4.5X80-6X100 mm

1274MQ

 3X100-4X100-5.5X125

1995MQ/G2 CP15L

 558x277x270 mm

1169MQ/D2  011690143

1150MQ 180 mm

63.Assortment of insulated combination pliers and insulated diagonal cutting nippers, bright chrome-plated finish 1082MQ 160 mm

1273MQ/D6  012730851

45.Set of 6 screwdrivers

1274MQ  3x100-4x100-5,5x125 mm

1272MQ  PH0x60-PH1x80-PH2x100 mm

46 Ac_Neutro_Exp_41_48.indd 46

20/11/15 16:09

new item



C04TSS/7  024003077

700 kg

1 728.Mobile roller cab with seven drawers, made entirely of stainless steel • Seven drawers (570 x 410 mm) with ball bearing slides; 6 drawers, 83 mm high; 1 drawer, 170 mm high; • 4 castors Ø 125 mm 2 fixed and 2 steering (two with brakes); • Front centralized lock; • Frame made entirely of stainless steel • Castors, supports, ball bearings, drawer interiors and guides made of stainless steel • Drawer handles made of aluminium

410

570

935 mm

83 mm 170 mm

25 kg 30 kg

m

0m

47

l tools can be Beta stainless steeave at 121° C sterilized in autocl

680 mm

42INOX/SC9  000420387

130.Set of 9 combination wrenches made of stainless steel with compact support

1293INOX/D8

 8-10-11-12-13-14-15-17-19 mm

1290INOX  2,5x50-3x75-4x100 5,5x150-6,5x150 mm

 012930408

39.Set of 8 screwdrivers made of stainless steel

1292INOX  PH0x60-PH1x80 PH2x100 mm

47 Ac_Neutro_Exp_41_48.indd 47

20/11/15 16:09

1740B280  017400280

 017410450

 017400330

44.2,4÷4,8 mm steel

1741U

1740B330

29.-

50.-

Ultra compact riveting pliers with adjustable force

3,2÷6,4 mm steel

Compact heavy-duty riveting pliers

2,4÷4,0 mm steel

• Optimized lever ratio for increased compactness and handiness.

• 3 jaws lock rivet for a perfect grip.

• Adjustable head for pulling rivet by 2 to 5 leg movements.

-

3 jaws: improved rivet grip

With stem tank

200 m

m

+

3 jaws: improved rivet grip

1749AC  017490005

25.High thrust gun for chemical binders

230 mm

STANDARD

Ø 50 mm

1750 500  017500500

28.Lever operated grease guns, 500cc

550 Bar

48 Ac_Neutro_Exp_41_48.indd 48

20/11/15 16:09

General maintenance tools 1873

1756D

 018730030

 017560515

 IPX4

449.-

49.-



Solid and fluid vacuum cleaner, 30 l, stainless steel drum

Suction gun, 1500 ml, made of polypropylene • Double NBR gasket • Operating temperature: +0 - +50 °C • NOT suitable for fuel

TECHNICAL SPECIFICATIONS • two-stage by-pass motor • voltage: 230/240 V • frequency: 50/60 Hz • max. power: 1100 W • airflow rate: 55 l/sec.

• max. suction pressure: 220 mbar • max. drum capacity: 30 l, made of stainless steel • acoustic emissions: <61 dB(A) • cable length: 6 m • trolley for accessories:

OFF → ON

• blowing function • non-marking wheels

STANDARD ACCESSORIES • 1 corrugated hose with ergonomic handle • 2 hard extension tubes • 1 industrial brush frame • 1 industrial section for carpets • 1 industrial section with fluid collection hoses • 1 flat nozzle • 1 triangular nozzle

1500 ml

FILTERING SYSTEMS • 1 filter paper bag • 1 surface filter cartridge 1900 cm2, 12 μm nom.

• 1 anti-foam filter PPI 45/PPI 30

1870

 018700020

159.Solid and fluid vacuum cleaner, 20 l

 IPX4



TECHNICAL SPECIFICATIONS • single-stage by-pass motor • voltage: 230/240 V • frequency: 50/60 Hz • max. power: 1200 W • airflow rate: 58 l/sec.

• max. suction pressure: 190 mbar • max. drum capacity: 20 l, made of antistatic PP • acoustic emissions: <70 dB(A) • cable length: 5 m • trolley for accessories

STANDARD ACCESSORIES, Ø 36 mm • 1 corrugated hose with ergonomic handle • 2 hard extension tubes • 1 multiuse brush for floors and fluids • 1 flat nozzle FILTERING SYSTEMS • 1 surface air filter cartridge 1900 cm2 - 12 μm nom.

• 1 anti-foam filter PPI 45/PPI 30

49 Ac_Neutro_Exp_49_56.indd 49

01/12/15 12:16

• Viewing area: 98x43 mm • Darkening shade: DIN 9-13, externally adjustable • UV/IR protection • Light to dark time: 1/25000 s • Dark to light time: 0.25-1s • Adjustable darkening sensitivity and delay • Auto on/off • Grinding feature • Optimized shape to make it easier to breathe with pulled-down screen

7042LCD  070420001

123.Auto-darkening LCD mask, for electrode welding; MIG/MAG; TIG and plasma.

Solar cells power supply and lithium batteries for outstanding LCD filter life

DC hand electrode inverter welding machines

Ultracompact and easy to carry, complete with cables, hammer brush and shoulder strap. Arc force, hotstart, anti-sticking and thermostatic protection features

1860K/160A 200 mm

 018600160

789.-

0

33

m

m

130 mm

1860E/120A

1860E/150A

 018600120

0

27

m

m

558.-

200 mm

200 mm

439.-

 018600150

Use factor Delayed fuse

Protection Use with generators Operating temperature Usable electrodes

m

m

130 mm

120 mm

Adjustment current Power supply Absorbed power

0

33

1860E/120A

5÷120A 1x230V MAX 2.5 KVA 35% - 120 A 60% - 70 A 100% - 55 A 12 A IP21 ✗ -15/+40° C (+5/+104° F) Ø 1.5 - 3.25 mm

rutilic, basic, stainless steel, cast iron, etc.

1860E/150A

5÷150A 1x230V MAX3,3 KVA 35% - 150 A 60% - 120 A 100% - 100 A 16 A IP23 ✗ -15/+40° C (+5/+104° F) Ø 1.5 - 4 mm

rutilic, basic, stainless steel, cast iron, etc.

1860K/160A

5÷155A 1x230V MAX 3,7 KVA 35% - 150 A 60% - 130 A 100% - 100 A 20 A IP21 ✔ -15/+40° C (+5/+104° F) Ø 1.5 - 4mm

50 Ac_Neutro_Exp_49_56.indd 50

20/11/15 16:11

new item

new item

High-brightness LED torch, made of sturdy, anodized aluminium

1837N

 018370002

54.Magnetic, articulated lamp with high-brightness LEDs, up to 400 lumen

1350 1xAA

• Batteries (not included) : - 1xAA (life 20/60 h) - 2xAA (life 28/84 h)w - 3xAA (life 36/108 h) • Lumens: 400>40>OFF • Charge indicator • Adjustable focus • IPX6

2xAA

3xAA

1834P XL  018340330

62.-

550

1834P L  018340325

49.-

350

1xAA

2xAA

3xAA

AA

3xAA Not included

1834P M  018340320

29.-

300

D

3xD Not included

1xAAA 2xAAA 3xAAA AAA

1xAAA 2xAAA 3xAAA Not included

1834P S  018340310

24.-

AA

2xAA

Not included

IPX6

1836

 018360100

35.Articulated LED headlamp, dual brightness, with sensor IPX6

Adjustable focus 90 lumens 51 Ac_Neutro_Exp_49_56.indd 51

20/11/15 16:11

1838 FLASH  018380300

250.-

D E T N E T A P



Rechargeable, ultracompact spotlight, designed to offer the best possible solution for each use

• IP65 - without external power supply • Dual brightness: 650 / 300 lumens • Lithium polymer battery 7.4 V 4000 mAh

360°

1/4”

Abundant ready lighting Compact: no moremm than 85x100x155 in size

re: Can be placed anywherubber on flat surfaces: with 1/4” feet in three sides or drive for stands

90°

230V

650 300 12V

new item

5m

Kit for detecting leaks in systems

Contents: - Rechargeable UV and white light lamp, with charger - Anti-UV, high-contrast glasses, with case

1838UV/S2

COB LED UV UV-395nm

 018380850

114.-

150 lumen/UV LED

3h/3h

3,7V/1600mAh Li-on

3h

Charger input: 100-240Vac 50/60Hz

IP 20

52 Ac_Neutro_Exp_49_56.indd 52

-10° to +40°C

20/11/15 16:13

even more compact and brighter

new item

Swinging hook

1838/11LED  018380111

99.Rechargeable inspection lamp with ultra-high brightness LEDs, lithium polymer battery

now with head LED

• Compact body made of antislip rubber • With charging station, 110-230Vac • With multidirectional head LED

320 Lumen

<20%

1842LED/BM  018420301

w e n

89.-

LED

• Compact body made of antislip rubber • Easy-to-replace front glass • Swinging hook • With multi-directional head LED light

287.-

Li-on

 018420311

89.made of antislip rubber 320 • Compact body • Easy-to-replace front glass Swinging hook Lumen • With multi-directional• head LED light

10-m-long cable

1846LED/BM  018460301

1842LED/ABM

Lamp with ultra-high brightness LEDs, 12-24 V; AC-DC

Lamp with ultra-high brightness LEDs, 100-240 Vac

m

m e it

Easy-to-replace front glass

m e t i new

Automatic cable reel with LED inspection lamp, 100-240 Vac • With 230/24 V safety transformer • Max. 25 W

1846LED/ABM  018460311

-240Vac

277.Automatic cable reel with LED inspection lamp, 12-24 V; AC-DC • Max. 60 W

53

°C

Ac_Neutro_Exp_49_56.indd 53

20/11/15 16:14

1760PA/80  017600002

162.-



• Range: 1mA-80A AC/DC • Torch function with white LED • Backlit LCD display • Zero setting function • Hold function • Auto power off • Power supply: 2 1.5V AAA-type batteries

AC/DC amperometric clamp, 80A Specifically designed to measure low current leakage or absorption values on vehicles

akage • Ideal for low le 0A values 1mA-8 LED ss • High-brightne SPECIFICATIONS DC voltage: 0.1mV ÷ 600V AC voltage: 0.1mV ÷ 600V AC current: 0.01A ÷ 1000A DC current:: 0.01A ÷ 1000A Resistance: 0.1Ω ÷ 40MΩ Capacity: 0.001nF ÷ 40 µF Frequency: 0.001kHz ÷ 4kHz Temperature: -40°C ÷ 1000 °C -40°F ÷ 1832°F Power supply: 1 9V battery (not included)

1760PA/AC-DC  017600000

222.Amperometric clamp and digital multimeter

• Allows DC and AC measurements up to 1000 A • Integrated multimeter function A: AC/DC V: AC/DC



new item 1497RC

 014970351

1497/C94  014970300

49.-

275.-

T-taps, pair

• pick up signal without damaging cables • cable section: 1.5÷3.5 mm • voltage: 0÷330V • max. current: 5A

Assortment of 94 car testing connectors.

For use with main diagnostic tools ASSORTMENT CONTENTS: • 2 t-taps • 2 potentiometers • 2 warning lights • 2 SRS connectors • 2 alligator clips • 2 acicular probes • 2 prods • 2 dual banana connectors • 4 single banana connectors • 24 flat male terminals 0.6÷6 mm • 12 round male terminals 1.6÷3.9 mm • 24 flat female terminals 0.6÷6 mm • 12 round female terminals 1.6÷3.9 mm

 430x390x100 mm

54 Ac_Neutro_Exp_49_56.indd 54

20/11/15 16:14

cluded)

new item 961D

 009610500

1 222.-

TECHNICAL DATA

Optimal viewing distance: Power supply: Estimated battery life: Weight: Sensor resolution: Viewing width: Video and photo resolution: Dimensions:

Automotive

• Protective shell • TFT LCD display, 7” • Probe Ø 5.5 mm, with front and side camera, 4 LEDs • Photo and video function

2,5-30 cm 3,7V - 4200 mAh 2,5-4 ore 520g 640x480 pixels (digital) 60 degrees 640x480 184x144x27 mm

new item

mm, 5 .

5 t eØ Probwith fronmera, ca side and 4 LEDs

Micro-SD Microphone Micro USB card input

514.-

961P6

 009610000

545.-

Micro HDMI

new item

961D/DC8,5

961D/CF3,8  009610511



Digital electronic videoscope with 5.5 mm probe Allows individual still images and video clips to be recorded and played back directly on tool

 009610513

1-m probe with 3.8-mm front camera

1-m probe with dual UV camera

449.-

Electronic videoscope with flexible probe Allows videos or individual images to be directly recorded on instrument

961P4

 009610004

• Supports SD cards (8 GB) • Supports flash memories (8 GB) • 4 LEDs • Power supplied by USB port (built-in battery)

545.-

45° mirror and magnet Internal memory TV-OUT feature Sensor pixels Maximum resolution Probe length Camera diameter Video formats Photo formats Shooting angle Power supply

961P6

✔ 32MB ✔ 640x480 320x240 1m 6 mm MPEG4, 3GP, AVI,ASF. JPEG 0÷180° 3,7V 2000 mAh

961P4 961P6 L (m)

961P4

✘ 32MB ✔ 640x480 320x240 1m 4,5 mm MPEG4, 3GP, AVI,ASF. JPEG 0÷180° 3,7V 2000 mAh

Ø mm



961P6/S2

✔

✔

2

6

009610262

961P6/S3

✔

✔

3

6

009610263

€

€ 265,00

239.-

€ 310,00

279.-

55 Ac_Neutro_Exp_49_56.indd 55

20/11/15 16:14

new item 1464T

 014640050

599.SPECIFICATIONS • 5” touch screen display • rechargeable polymer lithium battery • complete with 80 bar sensor (for low pressure) and USB cable

960AD/TP2  009600510

336.-

Digital pressure and compression tester With kit 960AD/TP2, it makes it possible to test the following: • petrol and diesel engine compression • engine oil pressure • common rail low pressure • petrol injection pressure With kit 1464AP, it makes it possible to test the following: • actual common rail circuit pressure • high pressure pump pressure

Set of adaptors for item 960TP

Contents: • Dummy injectors • Dummy glow plugs • Spark plug adaptors • Oil cap adaptors • Petrol injection couplers • Set of spare gaskets

new item 1464AP  014640450

519.Set for testing high pressure system in common rail diesel engines, with item 1464T Complete with: • high pressure pipe set • fittings • 2,000 bar sensor

 430x310x50 mm

new item 1464IC

 014640350

390.Set of dummy injectors and dummy glow plugs for item 1461T

 430x310x50 mm

Makes it possible to connect to the engine to check compression in diesel engines with digital tester 1464T.

Contents: • 22 dummy glow plugs • 5 dummy injectors • 1 universal dummy injector kit for trucks, marine engines and agricultural machines  559x312x50 mm

56 Ac_Neutro_Exp_49_56.indd 56

20/11/15 16:14

Automotive new item 1498/4A  014980104

108.• Automatic 6 V or 12 V selection • Automatic battery type selection

new item

TECHNICAL DATA

Power supply voltage: Frequency: Rated current (min-max): Battery voltage: Battery capacity: Charging time: Degree of protection:

220V-240V 50-60 Hz 1-4 Amp 6V/12V 4Ah-80Ah 12 hours IP65

rcycle Electronic car/motoer battery charg larity • Protected against po rcuits reversal and short ci splay • Digital backlist di hook • Pull-back fixing

1498/8A  014980108

149.• Flat battery recovery function • Power supply function 13.8V-5A

TECHNICAL DATA

Power supply voltage: Frequency: Rated current (min-max): Battery voltage: Battery capacity: Memory saving feature: Degree of protection:

220V-240V 50-60 Hz 2-8 Amp 12V 5Ah-160Ah 13,8V - 5A IP65



new item 1498/50A  014980050

1 225.-



12 V / 50 A

Electronic multipurpose battery charger, 12V Particularly suitable for charging and powering vehicles while reprogramming and self-diagnosing

ECU

Protocollo diagnosi Diagnosis protocol

TECHNICAL DATA

380 mm

• Max. charging/power supply current: 50 Amp • charging • battery recovery • power supply for ECU diagnostic protocols • electronic management through microprocessor • protected against polarity reversal and short circuits

Alimentatore Power supply

m

0m

10

220 mm

Power supply Voltage Charging current Charging capacity Maintenance capacity Cable length Section

230V 12V 1-50A 5-500Ah 5-1500Ah 3m 10 mm2

1497/C23  014970200

149.Assortment of 23 tools for releasing electrical connectors  430x310x50 mm

57 Ac_Neutro_EXP_57_64.indd 57

20/11/15 16:17

new item 1498/40A  014980140

829.-



Multipurpose battery charger /starter, 12-24V wheeled

800 mm

• 3 programmed charging cycles and 1 manual cycle • electronic adjusting potentiometer • specific WET-SPIRAL/GEL-AGM charging cycles • electronic control and protection system • 10-stage charging process • battery desulfurization and recovery function • supply function • dual voltage, 12-24V • also suitable for Start&Stop batteries • professional rubber-insulated brass clamps m

0m

28

TECHNICAL DATA Power supply: Output voltage: Charging current: Starting current: Charging capacity:

230V 12-24V 1-40A 350A max cc 4-450Ah

2 in 1 battery charger + starter

300 mm

1498TB/12  014980400

  370x270x100 mm

459.Digital battery tester, 12V

• Allows the following to be tested: battery, alternator and starter • Fitted with software for printing test from PC • Backlit display • Compact, shockproof frame • 10 language software • Complete with input for connecting a removable mini printer (optional accessory)

1498ST/TB  014980410

169.-

Mini thermal printer for tester item 1498TB/12

TECHNICAL DATA: • Applications: 12V battery test 12V alternator charge test - Starter test • Operating range: 100-1700 CCA • Reference standards: CCA,SAE,DIN,EN,IEC,JIS • Batteries supported: PB, Wet, Gel, Agm, Mf, Vrla, Sli • Voltmeter: 9V-15V • Cable length: 180 cm • Languages: Italian, English, French, German, Spanish, Polish, Romanian, Dutch, Swedish and Finnish • Accessories included: USB cable and software



• Mini printer can be directly connected to tester • Allows test results to be printed

58 Ac_Neutro_EXP_57_64.indd 58

20/11/15 16:17

cc

Automotive 1498/12  014980480

12V

Battery

438.Portable car starter, 12V • Pickup current: 2200A • Shoulder strap included • Sealed lead acid battery, solid electrolyte (AGM) type



12-24V

1498/24  014980490

865.-

Portable car and commercial vehicle starter, 12-24V

• Pickup current: 4200A (12V) - 2100A (24V) • Shoulder strap included • Sealed lead acid battery, solid electrolyte (AGM) type

new item



1498MN/12  014980000

FEATURES 1) motor vehicle starting with 12-volt battery (diesel and petrol engines up to 2,000 cc) 2) charging of tablets, mobile phones and electronic devices in general 3) multi-use LED torch

239.Multipurpose portable starter TECHNICAL DATA Pickup current: Battery type: Starting output:

d ght an i e w t h lig ct compa

600A LiCoO2 12 Volt

,

• USB outlet for charging electronic devices

• mains and car power supplier

• USB cable with charge adapters

• starting cables with insulated clamps and device protecting against polarity reversal and short circuits

 240x185x60 mm

59 Ac_Neutro_EXP_57_64.indd 59

20/11/15 16:17

960KPC  009600780

211.-



Reversible impulse extractor with adjustable torque for glow plugs

Prevents glow plugs from being broken during disassembly

• Pneumatic extractor with adjustable torque and special sockets allow jammed glow plugs to be unscrewed, thereby minimizing damage risk • 5 1/4” impact sockets, long series, specially designed for glow plugs: 8-9-10-11-12 mm, 2 extensions and 1 articulated joint • 4 adjustable driving torques:  420x185x60 mm 10-20-30-40 Nm • Right-hand and left-hand adjustment

960KC/M....  009600801

266.Assortment of tools for removing broken or damaged glow plugs

For spark plugs with threads M8-M9-M10

 380x290x50 mm

960EPC  009600790

449.Set of tools for removing glow plug electrode

• Allows end part of electrode to be correctly and quickly removed in case of breaks or seizures in glow plug seat.

• Suitable for glow plugs with threads M8x1 - M9x1 - M10x1 - M10x1,25

CRACK AREA

 270x230x80 mm

60 Ac_Neutro_EXP_57_64.indd 60

20/11/15 16:18

Automotive new item 1462/KD  014620060

590.-

Tool assortment for removing Denso injectors, complete with hammer

• suitable for Denso injectors mounted on Toyota, Nissan, Mazda, Opel and Lexus vehicles • allows injectors to be removed regardless of engine • does not damage injectors

oes Engine ded not ne ed ov to be rem  350x210x80 mm

960KI

 009600235

1 830.Assortment of common rail diesel injector pullers

Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed • Mechanical and hydraulic operation • Includes one 12-t hydraulic jack • Can be directly used on vehicle with mounted engine • Numerous adjustment options on head make it possible to work on most engines available  590x470x140 mm

960PI/P  009600216

s

14 piece

253.Assortment of 14 special tools and reamers for cleaning injector seats

mm

ASSORTMENT CONTENTS: • 3 flat reamers, ø 19/15 mm - ø 17/17 mm - ø 19/17 mm • 2 angled reamers, ø 21/17 mm - ø 17/17 mm • injector washer pulling tool • cutter cleaning brushes • injector cleaning brush • handle and cutter accessories Ø  373x280x61 mm

61 Ac_Neutro_EXP_57_64.indd 61

20/11/15 16:18

new item 437K/33  004370133

192.-

Bushes: M8x1,0 - M10x1,0 - M10x1,25 - M12x1,25 Taps: M8x1,0 - M10x1,0 - M10x1,25 - M12x1,0 M12x1,25 - M14x1,25

Tool assortment for repairing damaged spark plug threads

 210x150x50 mm

1477/C10  014770310

 

123.Bent wrench with 9 bits for belt tightening nuts in plastic case

• 1 bent wrench with bit drive • 4 double bi-hex bits: 12x14 - 13x15 - 16x17 - 18x19 mm • 5 bits for Torx® head screws: E10 - E12 - E14 - E16 - E18

 530x110x55 mm

1758VT  017580100

130.Cylinder head testing kit

Contrast liquid makes it possible to quickly check whether expansion tank contains any carbon dioxide.

 290x190x50 mm

62 Ac_Neutro_EXP_57_64.indd 62

01/12/15 12:19

Automotive new item 1759HD/TRUCK  017590065

275.Truck cooling system testing and sealing tool

Parts description • 1 bayonet connector cap, Ø 56 mm • 1 threaded cap, Ø 39 mm • 1 coarse threaded cap, Ø 43 mm • 1 fine threaded cap, Ø 43 mm • 1 threaded cap, Ø 49 mm • 1 threaded cap, Ø 59 mm • 1 threaded cap, Ø 69 mm  440x330x100 mm

1759TT

 017590300

142.Kit of 4 pairs of turbo circuit testing caps, for use with tyre inflators Kit contents: • 1 pair of caps sizes 35-40-45 mm • 1 pair of caps sizes 50-55-60 mm • 1 pair of caps sizes 65-70-75 mm • 1 pair of caps sizes 80-85-90 mm • 1 overpressure valve

 400x160x100 mm

1759HD/3  017590063

390.Cooling system seal testing and circuit filling tools • Make it possible to check circuit (pipes, joints, pumps, radiators) for leaks under pressure and quickly fill circuit, avoiding air bubble formation

 600x500x140 mm

63 Ac_Neutro_EXP_57_64.indd 63

20/11/15 16:19

1482

 014820001

77.Adjustable self-locking wrench for tank floating ring nuts

Ø mm 89÷170

new item 3012C

 030120255

566.Lower engine bracket Ideal for cars and commercial vehicles allows quicker replacement jobs on: • timing belt • water pump • alternator TECHNICAL DATA max. capacity: 250 kg length: 1050 mm height: 120 mm max. jack height: 260 mm weight: 12 kg

ADVANTAGES • it takes operator just a few seconds to apply cross member and fix it under vehicle • includes 2 pairs of stabilizer pins, to work on cars, vans and commercial vehicles • loading belt allowing cross member to be held steady, even when chassis does not have any holes

new item 1480

 014800010

253.Kit for filling diesel oil filters of cars without electric pumps Also for use with tyre inflators

Kit contents: • GM quick couplings • Renault, GM, Fiat quick couplings, inside Ø 6 mm • Renault, GM, Fiat quick couplings, inside Ø 7 mm • Ford quick couplings • PSA quick couplings, inside Ø 6 mm • PSA quick couplings, inside Ø 7 mm • Ford quick couplings • 2 cone-shaped adapters for cars without quick couplings

 410x320x70 mm

64 Ac_Neutro_EXP_57_64.indd 64

20/11/15 16:19

Automotive new item 1758A

 017580010

54.Non-return funnel with quick coupling, Ø 38 mm Particularly suitable for Volkswagen group cars.

• level indicator • big diameter pan with breakwater grate; capacity: 12 l • transparent pre-chamber: capacity 9.5 l • 1.8 m suction pipe

1877A

 018770080

918.-

Exhausted oil drain unit / vacuum cleaner, wheeled, with 90 l tank and pre-chamber



new item

1877

 018770008

522.Exhausted oil drain unit, wheeled, with 90 l tank

• pneumatic tank emptying through 1.8 m pipe

Standard accessories: • 1 hard probe, Ø 5x700 mm • 1 flexible probe, Ø 5x700 mm • 1 hard probe, Ø 6x600 mm • 1 flexible probe, Ø 6x700 mm • 1 flexible probe, Ø 7x700 mm • 1 flexible probe, Ø 8x700 mm • adapters for VW, BMW, CITROËN

65 Ac_Neutro_Exp_65_72.indd 65

23/11/15 15:12

new item 1493/C19  014930019

159.-

 

Set of 18 oil filter wrenches, particularly suitable for Asian cars

• 6 hexagon sockets, sizes 24-27-30-32.5-36-38 mm, for filter cartridges Kit includes 1 universal adjustable wrench Ø 58÷93 mm

1368

 013680001

Sizes included in set: Ø mm of sides 63-64 14 66,5 14 74 14 79 15 84 14 87 16 92 15 94,5 15 100,5 15 64,5 14 hook wrench for Toyota cars 64,5 14 hook wrench for Lexus cars

 490x450x60 mm



290.Plastic repair kit

• power supply: 220÷240 V with Schuko socket • heat gun cable length: 3.5 m • power supply cable length: 1.35 m • 2 power adjustments: 35-75 W • heat gun with brass terminals, 2 staple insertion angles: 0°-90° • input protection: thermal circuit breaker • output protection: 10 A fuse • metal gun pocket

ked and Allows crac tic parts broken plas fixed to be quickly

1368G/K400  013680140

46.-

1479/B27  014790407

50.-

Kit of 27 nylon tools for removing pins and working on plastics and seals

Assortment of 400 clips for item 1368 Supplied with: • 100 small coil clips • 100 big coil clips • 100 clips for concave angles • 100 clips for convex angles

66 Ac_Neutro_Exp_65_72.indd 66

23/11/15 15:12

Automotive 1884

 018840010

7,5 l

353.Oil filler tool for manual a nd automatic gearboxes and differentials

12 ADAPTORS

Complete with 12 adaptors for direct connection • Fitted with nonreturn valve for leakage-free oil filling • Delivery: 70 cc per pump shot • Tank capacity: 7.5 l • Maximum permissible oil viscosity: SAE 140

FORD UNIVERSAL (Bmw, Honda, Nissan...)

VW-AUDI VW-AUDI-PORSCHE VW-AUDI-MINI COOPER MERCEDES DSG VW-AUDI CVT VOLVO TOYOTA-LEXUS SKODA VW Passat/Tiguan <2007

AT-101 AT-102 AT-103 AT-104 AT-105 AT-106 AT-107 AT-108 AT-109 AT-110 AT-111 AT-112

1569/A  015690011

713.Assortment of tools for removing and installing rear axle silent blocks, driving shaft oil seals and wheel bearings

• Bushings can be used both on vehicle and on hydraulic press • Direct extraction with wrench • User-friendly, no pneumatic or hydraulic machines required • Kit contents: 4 threaded bars: M10-M12-M14-M16 4 washers bushings for diameters ranging from 44 mm to 82 mm

new item

 530x415x115 mm

1569/F

 015690021

297.Tool assortment for removing and inserting silentblocks Fiat Panda, Panda 4x4, Panda Metano and Cross, Fiat 500, Ford Ka and Opel Adam

 270x230x80 mm

67 Ac_Neutro_Exp_65_72.indd 67

23/11/15 15:13

1530/C5  015300300

362.Wheel hub and bearing pulling kit, 3, 4, 5 holes

 760x320x120 mm

Kit contents: • 1 universal flange (96÷138 mm) • 1 hydraulic screw (12 t) • 1 hammer face (2.8 kg), required for hubs without central fixing bolts

new item 1473P

 014730020

16.-

Clamp pliers for OETIKER® low-profile collars

1471M/C22  014710101

163.Pneumatic tool for pushing back and rotating right and left disc brake pistons with accessories in plastic case

437K/16  004370016

79.-

new item

Tool assortment for repairing damaged threads on brake caliper brackets M9x1.25

• Automatic jack • Thrust: 150 kg • Operating pressure 5÷8 bar

 350x310x85 mm

 210x150x50 mm

68 Ac_Neutro_Exp_65_72.indd 68

01/12/15 12:20

Automotive new item 720MRC

Suitable for the following Mercedes models: • Classe C e GLK (W204) • Classe E (W211, W212, W207) • Classe SLK (W172) • Classe ML (W164, W166) • Classe CL (W216) • Classe S (W221, W222)



 007200631

13.-

Impact socket with polymeric insert for Mercedes wheel screw

971/C8

 009710108

em t i w e n

233.Torque screwdriver with accessories for controlled tightening of tyre valves with pressure control systemfor valves with pressure sensors 583/6

1,2÷6 Nm

892/0 862TX  T10-T15-T20 900L

 11-12 mm

 335x145x60 mm

986 78

new item 971TSP

 009710025

895.-

er Includes ov 50 brands of vehicles

Tyre pressure sensor tool • reading of TPMS sensor information, including: sensor ID inflation pressure temperature battery state • sensor activation • universal sensor programming TECHNICAL DATA

Processor Display Resolution Cable communication Wireless communication Battery Life Recharge Updates



The tool has a database which supports repair operations, including: • driving torques • codes of original spares and compatible universal sensors

One-year updates included

Cortex M0+, 48 MHz 1,5” LCD, backlit 64x128 pixels USB Bluetooth, class 2, with integrated antenna Li-ion type, capacity 1100 mAh, voltage 3.7V ca. 8 hours via USB, ca. 3 hours periodic updating of vehicle database after first year

69 Ac_Neutro_Exp_65_72.indd 69

23/11/15 15:13

1550/2  015500002

3010T

1 849.Jack stands, pair

Pneumatic compressor for MacPherson and equivalent shock absorber springs

• Operating pressure: 6÷8 bars • Maximum thrust at 6.2 bars: 800 kg • Maximum thrust at 8 bars: 975 kg • Piston stroke: 255 mm • Supplied with 3 legs for diameters 90÷205 mm and 1 adjustable vice

H

3x

Max kg 3010/T2

2000

H min H Max mm mm 280

425

 030100002

74.-

3010/T3

3000

285

430

030100003

93.-

3010/T6

6000

400

580

030100006

134.-

3010/T10 10000

471

735

030100010

206.-

Mean air n consumptio 225l/min

1567

 015670001

228.-

new item

Lever for removing wishbone heads and shock absorbers from pillar One operator can position lever effortlessly and proceed with disassembly

It is enoughce r to apply a fo of 20 Nm

0,5 Kg

OK

200 Kg

PA TE NT ED

Max 20 Nm

0,5 Kg

200 Kg

PA TE NT ED

Max 20 Nm

70

OK

Automotive 3030/2T  030300020

577.-



Lowered hydraulic car jack, 2 t with 6 wheels

• Car jack can be easily handled on uneven, irregular floors • Minimum plate height: 85 mm • Maximum plate height: 520 mm • Length: 860 mm • Width: 400 mm • Maximum capacity: 2 tons

Pedal allows easy approach

steady, easy to handle

Dual front tilting wheels made of plastic material (PTFE)



2t H max 520 mm

H min 85 mm

new item 3063/2,5T  030630025

1 499.-



A B C D E F

Air hydraulic jack, 2.5 tons, wheeled Particularly suitable for use on cars and commercial vehicles Ideal for garages, tyre repairers’ and body shops

1436 mm 290 mm 2170 mm 88 mm 655 mm 330 mm

FITTED WITH: • automatic arm return • full-load speed control

TECHNICAL DATA capacity: 2.5t weight: 75 kg power supply pressure: 8-10 bar air consumption: 400 l/min



2,5 t

71 Ac_Neutro_Exp_65_72.indd 71

23/11/15 15:14

new item 3065/40-20T  030650200

2 178.-



Air hydraulic jack, 40-20 tons

A B C D E F G H K L M N

1400 mm 1320 mm 525 mm 270 mm 150 mm 78 mm 72 mm 150 mm 206 mm 300 mm 20 t 40 t

• suitable for use on heavy vehicles • functional and easy to handle, for transportation on mobile repair shops as well • automatic piston return • two descent valves with under load speed control TECHNICAL DATA capacity: 40/20 tons weight: 39 kg power supply pressure: 8-10 bar air consumption: 400 l/min



40 t

new item 3067/70-13T  030670130

4 092.-



Air hydraulic jack, 70-43-23-13 t

Long version, suitable for use on lorries, articulated vehicles, buses and coaches, and agricultural machines • automatic piston return • two descent valves with under load speed control TECHNICAL DATA capacity: 70-43-23-13 tons weight: 74 kg power supply pressure: 8-10 bar air consumption: 600 l/min

A B C D E F G H L M N O P Q R S

1430 mm 1320 mm 1000 mm 320 mm 150 mm 250 mm 60 mm 68 mm 56 mm 66 mm 350 mm 240 mm 70 t 43 t 23 t 13 t



70 t

72 Ac_Neutro_Exp_65_72.indd 72

23/11/15 15:14

Automotive 3061/2T  030610020





TECHNICAL DATA capacity: 2 t weight: 14 kg power supply pressure: 8-10 Bar height: min.132 - max. 326 mm

2t

636.B C D E

Air hydraulic jack, 2 tons - 2 stages

415 mm 250 mm 132-326 mm 2t

Fitted with: • high-resistance three-layer diaphragm and internal telescopic guide • end-of-stroke stop and overloading safety valve • can also be used on auto lifts

3025

3025/PF

 030250001

 030250011

1 446.-

222.Barrel handling pliers 70 mm

4 loading positions: 450-650-800-1000 kg

Maximum capacity: 300 kg

Folding hydraulic crane with dual effect pump

• Maximum capacity: 1 t • Folding frame for significantly increased compactness • With load limiting valve and chrome-plated stand • Controlled descent speed • Nylon wheels • Maximum height: 2400 mm • Dimensions: 1560 x 1000 mm

1650 mm

550 ÷ 640 mm

m

0m

55

1560 mm

73 Ac_Neutro_Exp_73_80.indd 73

20/11/15 16:22

300 Kg 3026 0,3  030260003

515.• Maximum capacity: 300 kg • Pedal pump • Chrome-plated stand • Nylon wheels • Minimum height: 1120 mm • Maximum height: 1970 mm

Hydraulic pit and under bridge jack

new item 3026/SP  030260505



489.Universal transmission support Allows one operator to disassemble and reassemble any transmissions of cars, commercial vehicles and off-roaders quickly and safely.

500 Kg 3026 0,5  030260005

605.-

Suitable for stands with diameter: 25-30-35-45 mm Max. capacity: 150 kg Height: 250 mm

• Pedal pump • Chrome-plated stand • Load limiting valve • Nylon wheels • Maximum capacity: 500 kg • Minimum height: 1140 mm • Maximum height: 1990 mm

360°

3014SAR  030140360

959.Maximum capacity: 450 kg • Easy to fold up, for significantly increased compactness • Allows 360° rotation of engine or gear • Provides unparalleled safety and stability during jobs

1000 mm

Folding engine stand

m

0m

92

1145 mm

74 Ac_Neutro_Exp_73_80.indd 74

20/11/15 16:22

Automotive 3027 20  030270020



1 644.Hydraulic press with moving piston

• Manual 2-speed pump • Moving piston • Chrome-plated stand • Automatic piston return • Hydraulic safety in case of overloading • Gauge • Set of V-shaped prisms included

Set of pin punches and plate for press item 3027 20 Pin punch Ø: 5-10-14-18-24-29 mm

1900 mm

Maximum capacity: 20 t m

0m

60

950 mm

3027 50

3027/KP50

4 260.-

432.Set of pin punches and plate for press item 3027 50 Pin punch ø: 5-10-14-18-24-29 mm



 030270050

 030270550

Hydraulic press with moving piston and hoist • Manual 2-speed pump • Moving piston • Chrome-plated stand • Automatic piston return • Hydraulic safety in case of overloading • Gauge • Set of V-shaped prisms

Maximum capacity: 50 t

3027/KPP50 182.Pedal control for hydraulic press item 3027 50

2000 mm

 030270555

m

0m

65

1400 mm

75 Ac_Neutro_Exp_73_80.indd 75

20/11/15 16:22

new item 3007

 030070001

377.-

Underbody trolley for vehicles without forecarriage / rear axle Allows vehicles without forecarriage or rear axle to be easily handled while working

• 4 pivoting wheels, including 2 with brakes, suitable for use in painting furnaces • 2 sliding supports to fit all chassis

max. capacity: 800

kg

1400 mm

600 mm

new item

max. capacity: 700

3008

kg

 030080100

2 292.Jack and positioner for single and twin truck wheels

Ø 500 ÷ 1500 mm 56”

• min. height: 140 mm • max. height: 660 mm • distance between rollers: 470÷740 mm • hydraulic overloading safety device • front pivoting wheels As well as for conventional purposes, it is also particularly useful for removing and positioning tanks and bumpers



4 rollers for easy positioning

76 Ac_Neutro_Exp_73_80.indd 76

20/11/15 16:22

Automotive 3002

 030020001

74.Creeper and seat

• Steel frame • PVC lining with upholstery • Easily convertible into a creeper or a seat

420 mm

2 products in 1: creeper or seat

100 mm

3003

 030030001

56.Creeper made of shockproof plastic Ø castors: 76 mm

3009

120 mm

 030090001

288.Wheel lifter

Maximum lifting capacity: 550 kg • 4 pivoting rollers • Roller width: 200 mm • For wheels up to 240 mm in width

Ideal for: cars • loading damageds onto tow truck • car repair garages oms owro • moving cars in sh

77 Ac_Neutro_Exp_73_80.indd 77

20/11/15 16:22

new item 1927XM/K5  019270129

230.-

Ultra compact and powerful 770 Nm





Assortment of one compact reversible impact wrench and five impact sockets, in plastic case

 307x206x86 mm

1,3

• Single hammer impulse device • Amazingly compact and powerful • One-hand reverse button • Three power adjustable screwing/unscrewing positions • Exhaust through handle • Balancing hook

1927CD

 019270007

236.-

 720 17-19-21-22-24 mm

299.-

Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

10.000 Single hammer 770 M2234 mm M1827 mm 1/4” 6,2 10 122



191 mm

186 mm

1,9

• Lightweight and well-balanced for enhanced ease of use • Three power adjustable screwing positions • Exhaust through handle • Silenced

1927P

rpm



Reversible impact wrench, made from composite material

 019270008

Free speed Impulse device Max. torque Bolt capacity Bolt capacity Air inlet Operating pressure Internal hose size (Ø) Mean air consumption

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

rpm Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

Extremely powerful 1750 Nm



191 mm



Reversible impact wrench, made from composite material

7.000 Double hammer 1.020 M2234mm M1827mm 1/4” 6,2 10 130

186 mm

2

• Lightweight and well-balanced for enhanced ease of use • Reversible lever • Three power adjustable screwing positions • Exhaust through handle • Vibration-dumping handle

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

rpm

7.500 Double hammer Nm 1.750 Cl 8.8 M2436 mm Cl 12.9 M2030 mm GAS 1/4” Bar 6,2 mm 10 l/min 290

78 Ac_Neutro_Exp_73_80.indd 78

20/11/15 16:23

Pneumatic tools 1928K4  019280104

475.-





258 mm

230 mm

Assortment of one reversible impact wrench and four impact sockets, long series • Extremely powerful in its category • Reversible lever • Three power adjustable screwing positions • Balancing hook

 019280022

430.-

rpm

Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption Weight

Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min Kg

Impulse device

5,2

 728L 27-30-32-36 mm

1928DA

Free speed

4.000

Pin Clutch

1.493 M2741mm M2436mm 3/8” 6,2 10 260 9,3

 410x330x106 mm



217 mm



212 mm

Reversible impact wrench

• Double hammer impulse device • Sturdy and compact; high torque • Reversible lever • Three power adjustable positions • Exhaust through handle • Slip-proof ergonomic handle

1928CD  019280007

549.-

Free speed

rpm

5.000

Max. torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

1.695 M2741mm M2436mm 3/8” 6,2 10 240

Impulse device

4,3





Reversible impact wrench, made from composite material

• Double hammer impulse device • High weight/power ratio • Reversible lever • Three power adjustable screwing positions • Exhaust through handle • Silenced

Double hammer

235 mm

210 mm

3,5

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

rpm Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

4.500 Double hammer 1.800 M2741mm M2436mm 3/8” 6,2 10 215

79 Ac_Neutro_Exp_73_80.indd 79

20/11/15 16:23

1930PA  019300032

696.-



300 mm



270 mm

Reversible impact wrench

• Extremely lightweight and compact • Auxiliary handle • Reversible lever • Three power adjustable positions

1930HLA  019300040

1 194.-

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

9,6

rpm Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

3.500 Double hammer 2445 M3655mm M3046mm 1/2” 6,2 13 350

High torque 3661 Nm





Reversible impact wrench

• Double hammer impulse device • 9” long anvil • Auxiliary handle • Reversible lever • Three power adjustable screwing positions • Upper exhaust

16,4 628 mm 9” (230 mm)

1930ZL  019300070

1 535.-

180 mm

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

rpm Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

3.000 Double hammer 3661 M4265mm M3350mm 1/2” 6,2 13 460

4068 Nm





Reversible impact wrench

• Double hammer impulse device • Auxiliary handle • Reversible lever • Three power adjustable screwing positions • Upper exhaust

rpm

3.000

Internal hose size (Ø)

Nm Cl 8.8 Cl 12.9 GAS Bar mm

Double hammer 4068 M4265mm M3655mm 1/2” 6,2 13

Mean air consumption

l/min

480

Free speed

15

Impulse device Max. torque Bolt capacity Bolt capacity Air inlet Working pressure

475 mm 180 mm

80 Ac_Neutro_Exp_73_80.indd 80

20/11/15 16:23

1927AN  019270012

336.-

Free speed Impulse device Maximum torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption





rpm Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

4.700 Single hammer 244 M1421mm M1219mm 1/4” 6,2 10 190

Angle reversible impact wrench

• Single hammer impulse device • High torque • Reversible lever • Two power adjustable screwing positions • Exhaust through handle

1921 I

 019210035

216.-

2,1

The power of an impact wrench in the body of a ratchet

350 mm 72 mm

ø 1/4 GAS





Impact reversible ratchet

• “Pin Clutch” impulse device • High Torque (101 Nm) • Eliminates torque reaction • Faster than standard ratchets • Ergonomic rubber handle• Rear exhaust

1,3

275 mm 46 mm

1946C4,8  019460006

Free speed Impulse device Max. torque Bolt capacity Bolt capacity Air inlet Working pressure Internal hose size (Ø) Mean air consumption

Nm Cl 8.8 Cl 12.9 GAS Bar mm l/min

A 290 mm



B 245 mm

449.Automatic air suction riveter

• Professional air riveter for use with 2.4 - 3.2 - 4.0 - 4.8 mm long steel, stainless steel, aluminium and copper rivets • Pointed cone-shaped spout • Powerful and handy, with handle made of composite material • Complete with safety nail container and oil gun

400 Pin Clutch 101 M1016mm M813mm 1/4” 6,2 10 235

rpm

1/4 gas

1,5

material/riveter

2,4

3,2

4

4,8

copper aluminium

4 4 4 4

4 4 4 4

4 4 4 4

4 4 4 4

steel stainless steel

Traction power Stroke length Working pressure Air inlet Air consumption Internal hose size (Ø) Maximum rivet capacity

8900 N 15 mm 6,2 Bar 1/4” GAS

2,6 l/cycle 10 mm stainless steel Ø: 4.8 mm

81 Ac_Neutro_Exp_81_88.indd 81

20/11/15 16:25

1933 I

 019330005

89.-



182 mm

45,1 mm

670

Die grinder

• Designed for heavy and long duty jobs, was the result of high power • Slip-proof housing and handle • Mounted on ball bearings • Knob speed regulator • Swivel air inlet • Silenced rear exhaust • Safety lever device • Collect chuck, 3 mm and 6 mm

1937

 019370001

296.-

 019370161

187.-

20.000 3-6 0,38 1/4” 6,2 10 260

860 100 mm Ø150 mm 230 mm

• No lubrication required • Extremely compact and easy to handle • Orbit diameter: 5 mm • 6-hole Velcro pad • Continuous motor speed adjustment • Nonslip, soft material handle • Designed for connection to suction systems with swivel fittings • Revolving exhaust

1937/KL

mm kW GAS Bar mm l/min



Roto-orbital palm sander, lubrication free, made from composite material

new item

rpm

Free speed Chuck capacity Power Air inlet Working pressure Internal hose size (Ø) Mean air consumption

Free speed Power Pad size Orbit diameter Spindle thread Air inlet Operating pressure Internal hose size (Ø) Mean air consumption

Free speed Power Pad size Spindle thread Air inlet Operating pressure Internal hose size (Ø) Mean air consumption Polisher weight

 750

Orbital mini polisher

• Supplied with one backing pad (Ø 75 mm), two polishing sponges (Ø 90 mm) and one lambswool pad (Ø 90 mm) • Pistol grip • Adjustable power regulator • Compact and lightweight • Suitable for polishing lights • Perfect for repairs in tight areas

rpm kW mm mm

12.000 0,18 150 5 5/16”-24 1/4” 6,2 10 170

GAS Bar mm l/min

rpm kW mm GAS Bar mm l/min Kg

3.200 0,25 75 M6 1/4” 6,2 10 91 0,75

130 mm

140 mm

 340x300x85 mm

82 Ac_Neutro_Exp_81_88.indd 82

20/11/15 16:26

new item 1940E10  019400010

129.Air hammer



1,7 266 mm

• Compatible with chisels with 10-mm hexagon drive • Can be used for cutting sheet, bolts and bodies, removing welding slags, rivets, plaster and tiles • Supplied with a spring and a bayonet retainer • Speed control button • Ergonomic, non-slip handle for optimal balance • Exhaust through handle • Shock absorption device

1932B10  019320040

92.-

175 mm

Strokes per minute Chisel inlet Piston size Piston stroke Air inlet



10 76

1,2 Free speed Chuck capacity Power Spindle thread Air inlet Working pressure Internal hose size (Ø) Mean air consumption



1901BM/8  019010111

rpm mm kW GAS Bar mm l/min

1800 1÷10 0,23 3/8” -24UNF 1/4” 6,2 10 160



3,5

194.6,5

Automatic hose reel, shock-proof plastic body, for compressed air or cold water

Automatic hose reel shock-proof plastic body for compressed air or cold water

• Max. operating pressure: 15 bars • Polyurethane hose, Ø 10 mm • Metal clamp, revolving • Device for automatically fixing hose at desired length GAS m Bar

mm l/min

140 mm

225.-

Air inlet Hose length Operating pressure

Internal hose size (Ø) Mean air consumption



• Sturdy and handy • Autochuck • Reversible lever • Slip-proof handle • Exhaust through handle

 019010210

2900 10 19 67 1/4” 6,2

190 mm

Reversible drill

1901T/10

Operating pressure

 mm mm mm GAS Bar

3/8” 15+1 15

• Max. operating pressure: 12 bars • Polyurethane hose, Ø 8 mm

445 mm Ø 10 mm 160 mm

190 mm

Air inlet Hose length Operating pressure

GAS m Bar

1/4” 9+1 12

370 mm Ø8 mm 305 mm

R155 mm

83 Ac_Neutro_Exp_81_88.indd 83

20/11/15 16:26

7241C 37.Full-grain leather shoe, waterproof, with penetration proof insole • Steel toe cap • Elastic steel penetration proof insole

S3 SRC

EU UK  35 2,5 072410535 36 3,5 072410536 37 4,5 072410537 38 5 072410538 39 6 072410539 40 6,5 072410540 41 7 072410541 42 8 072410542 43 9 072410543 44 10 072410544 45 10,5 072410545 46 11 072410546 47 12 072410547 48 13 072410548



7246B 37.Suede shoe, perforated

• Steel toe cap • Elastic steel penetration proof insole

7243C 38.Full-grain ankle shoe, with penetration proof insole and quick opening system

• Steel toe cap • Elastic steel penetration proof insole

S3 RS SRC

EU UK  35 2,5 072460235 36 3,5 072460236 37 4,5 072460237 38 5 072460238 39 6 072460239 40 6,5 072460240 41 7 072460241 42 8 072460242 43 9 072460243 44 10 072460244 45 10,5 072460245 46 11 072460246 47 12 072460247 48 13 072460248



7245B 42.Lace-up full-grain leather ankle shoe, waterproof, with quick opening system and front protection with strap closure • Steel toe cap • Elastic steel penetration proof insole



EU UK  35 2,5 072430335 36 3,5 072430336 37 4,5 072430337 38 5 072430338 39 6 072430339 40 6,5 072430340 41 7 072430341 42 8 072430342 43 9 072430343 44 10 072430344 45 10,5 072430345 46 11 072430346 47 12 072430347 48 13 072430348

EU UK  35 2,5 072450235 36 3,5 072450236 37 4,5 072450237 38 5 072450238 39 6 072450239 40 6,5 072450240 41 7 072450241 42 8 072450242 43 9 072450243 44 10 072450244 45 10,5 072450245 46 11 072450246 47 12 072450247 48 13 072450248



S1P SRC S3 RS SRC 84 Ac_Neutro_Exp_81_88.indd 84

20/11/15 16:26

Safety footwear 7248G 47.Suede shoe with mesh inserts • Steel toe cap • Elastic steel penetration proof insole

EU UK  35 2,5 072480135 36 3,5 072480136 37 4,5 072480137 38 5 072480138 39 6 072480139 40 6,5 072480140 41 7 072480141 42 8 072480142 43 9 072480143 44 10 072480144 45 10,5 072480145 46 11 072480146 47 12 072480147 48 13 072480148

7249G 47.Suede ankle shoe with mesh inserts

• Steel toe cap • Elastic steel penetration proof insole

EU UK  35 2,5 072490135 36 3,5 072490136 37 4,5 072490137 38 5 072490138 39 6 072490139 40 6,5 072490140 41 7 072490141 42 8 072490142 43 9 072490143 44 10 072490144 45 10,5 072490145 46 11 072490146 47 12 072490147 48 13 072490148

 S1P SRC

new item 7235B 52.Action Nubuck shoe, waterproof, with nylon inserts • Steel toe cap • Elastic steel penetration proof insole

new item EU UK  35 2,5 072350235 36 3,5 072350236 37 4,5 072350237 38 5 072350238 39 6 072350239 40 6,5 072350240 41 7 072350241 42 8 072350242 43 9 072350243 44 10 072350244 45 10,5 072350245 46 11 072350246 47 12 072350247 48 13 072350248

7236B 54.Action Nubuck ankle shoe, waterproof, with nylon inserts

• Steel toe cap • Elastic steel penetration proof insole

EU UK  35 2,5 072360235 36 3,5 072360236 37 4,5 072360237 38 5 072360238 39 6 072360239 40 6,5 072360240 41 7 072360241 42 8 072360242 43 9 072360243 44 10 072360244 45 10,5 072360245 46 11 072360246 47 12 072360247 48 13 072360248

 S3 SRC 85 Ac_Neutro_Exp_81_88.indd 85

20/11/15 16:26

7200BKK

7201BKK

EU UK  35 2,5 072000235 36 3,5 072000236 37 4,5 072000237 38 5 072000238 39 6 072000239 40 6,5 072000240 41 7 072000241 42 8 072000242 43 9 072000243 44 10 072000244 45 10,5 072000245 46 11 072000246 47 12 072000247 48 13 072000248

48.Full-grain leather shoe, waterproof • Composite toe cap • Composite fibre penetration proof insole

53.Full-grain leather ankle shoe, waterproof • Composite toe cap • Composite fibre penetration proof insole

EU UK  35 2,5 072010435 36 3,5 072010436 37 4,5 072010437 38 5 072010438 39 6 072010439 40 6,5 072010440 41 7 072010441 42 8 072010442 43 9 072010443 44 10 072010444 45 10,5 072010445 46 11 072010446 47 12 072010447 48 13 072010448

 S3 SRC

7210BKK 48.Soft suede shoe, perforated • Composite toe cap • Composite fibre penetration proof insole

EU UK  35 2,5 072100335 36 3,5 072100336 37 4,5 072100337 38 5 072100338 39 6 072100339 40 6,5 072100340 41 7 072100341 42 8 072100342 43 9 072100343 44 10 072100344 45 10,5 072100345 46 11 072100346 47 12 072100347 48 13 072100348

7310BKK 84.Lace-up full-grain leather shoe, “welder” style, waterproof, with quick opening system and rubber outsole • Steel toe cap • Composite fibre penetration proof insole

EU UK  38 5 073100238 39 6 073100239 40 6,5 073100240 41 7 073100241 42 8 073100242 43 9 073100243 44 10 073100244 45 10,5 073100245 46 11 073100246 47 12 073100247

 S1P SRC 86 Ac_Neutro_Exp_81_88.indd 86

 S3 RS HRO SRC

20/11/15 16:26

new item 7200PN 59.Full-grain leather shoe, waterproof, with waterproof suede inserts • Composite toe cap • Composite fibre penetration proof insole

new item

EU UK  35 2,5 072000535 36 3,5 072000536 37 4,5 072000537 38 5 072000538 39 6 072000539 40 6,5 072000540 41 7 072000541 42 8 072000542 43 9 072000543 44 10 072000544 45 10,5 072000545 46 11 072000546 47 12 072000547 48 13 072000548

7201PN 61.Full-grain leather ankle shoe, waterproof, with waterproof suede inserts • Composite toe cap • Composite fibre penetration proof insole

EU UK  35 2,5 072010535 36 3,5 072010536 37 4,5 072010537 38 5 072010538 39 6 072010539 40 6,5 072010540 41 7 072010541 42 8 072010542 43 9 072010543 44 10 072010544 45 10,5 072010545 46 11 072010546 47 12 072010547 48 13 072010548

 S3 SRC

Imola

new item 7211PG 55.Suede shoe, perforated • Composite toe cap • Composite fibre penetration proof insole

S3 RS SRC

new item

Mugello

7216SN

EU UK  35 2,5 072110435 36 3,5 072110436 37 4,5 072110437 38 5 072110438 39 6 072110439 40 6,5 072110440 41 7 072110441 42 8 072110442 43 9 072110443 44 10 072110444 45 10,5 072110445 46 11 072110446 47 12 072110447 48 13 072110448

49.Suede sandal, perforated, with strap closure • Composite toe cap • Composite fibre penetration proof insole

S1P SRC

Suzuka EU UK  35 2,5 072160435 36 3,5 072160436 37 4,5 072160437 38 5 072160438 39 6 072160439 40 6,5 072160440 41 7 072160441 42 8 072160442 43 9 072160443 44 10 072160444 45 10,5 072160445 46 11 072160446 47 12 072160447 48 13 072160448

 87

Ac_Neutro_Exp_81_88.indd 87

20/11/15 16:27

new item 7313G 66.Suede shoe with nylon mesh and PU inserts

• Fibreglass toe cap • Composite fibre penetration proof insole

EU UK  35 2,5 073130635 36 3,5 073130636 37 4,5 073130637 38 5 073130638 39 6 073130639 40 6,5 073130640 41 7 073130641 42 8 073130642 43 9 073130643 44 10 073130644 45 10,5 073130645 46 11 073130646 47 12 073130647 48 13 073130648

7313B 66.Suede shoe with nylon mesh and PU inserts

• Fibreglass toe cap • Composite fibre penetration proof insole



EU UK  35 2,5 073130835 36 3,5 073130836 37 4,5 073130837 38 5 073130838 39 6 073130839 40 6,5 073130840 41 7 073130841 42 8 073130842 43 9 073130843 44 10 073130844 45 10,5 073130845 46 11 073130846 47 12 073130847 48 13 073130848

S1P SRC

Monza 7316N 75.Suede shoe, waterproof, with microfibre insert • Fibreglass toe cap • Composite fibre penetration proof insole

7323M

EU UK  35 2,5 073160535 36 3,5 073160536 37 4,5 073160537 38 5 073160538 39 6 073160539 40 6,5 073160540 41 7 073160541 42 8 073160542 43 9 073160543 44 10 073160544 45 10,5 073160545 46 11 073160546 47 12 073160547 48 13 073160548

75.Suede ankle shoe, waterproof, with microfibre insert

• Fibreglass toe cap • Composite fibre penetration proof insole





Assen

EU UK  35 2,5 073230335 36 3,5 073230336 37 4,5 073230337 38 5 073230338 39 6 073230339 40 6,5 073230340 41 7 073230341 42 8 073230342 43 9 073230343 44 10 073230344 45 10,5 073230345 46 11 073230346 47 12 073230347 48 13 073230348

S3 SRC

Estoril

88 Ac_Neutro_Exp_81_88.indd 88

20/11/15 16:27

7250NKK 75.Suede shoe, waterproof, with microfibre inserts • Composite toe cap • Composite fibre penetration proof insole

Sepang EU UK  38 5 072500238 39 6 072500239 40 6,5 072500240 41 7 072500241 42 8 072500242 43 9 072500243 44 10 072500244 45 10,5 072500245 46 11 072500246 47 12 072500247

7251NKK 79.-

Suede ankle shoe, waterproof, with microfibre inserts • Composite toe cap • Composite fibre penetration proof insole

EU UK  38 5 072510238 39 6 072510239 40 6,5 072510240 41 7 072510241 42 8 072510242 43 9 072510243 44 10 072510244 45 10,5 072510245 46 11 072510246 47 12 072510247

 S1P SRC

7258NKK 84.Suede shoe, waterproof, with waterproof nylon inserts • Composite toe cap • Composite fibre penetration proof insole

7259NKK

Le Mans EU UK  38 5 072580138 39 6 072580139 40 6,5 072580140 41 7 072580141 42 8 072580142 43 9 072580143 44 10 072580144 45 10,5 072580145 46 11 072580146 47 12 072580147

88.Suede ankle shoe, waterproof, with waterproof nylon inserts

EU UK  38 5 072590138 39 6 072590139 40 6,5 072590140 41 7 072590141 42 8 072590142 43 9 072590143 44 10 072590144 45 10,5 072590145 46 11 072590146 47 12 072590147

• Composite toe cap • Composite fibre penetration proof insole

 S3 SRC 89 Ac_Neutro_Exp_89_96.indd 89

20/11/15 16:28

7252NKK 93.Nubuck ankle shoe, waterproof, with waterproof microfibre inserts • Composite toe cap • Composite fibre penetration proof insole

Zolder EU UK  38 5 072520138 39 6 072520139 40 6,5 072520140 41 7 072520141 42 8 072520142 43 9 072520143 44 10 072520144 45 10,5 072520145 46 11 072520146 47 12 072520147

7253NKK 99.Nubuck ankle shoe, waterproof, with waterproof microfibre inserts

EU UK  38 5 072530138 39 6 072530139 40 6,5 072530140 41 7 072530141 42 8 072530142 43 9 072530143 44 10 072530144 45 10,5 072530145 46 11 072530146 47 12 072530147

• Composite toe cap • Composite fibre penetration proof insole



S3 SRC

7293NB 113.Greased Nubuck shoe, waterproof

• Aluminium toe cap • Composite fibre penetration proof insole

Daytona EU UK  38 5 072930538 39 6 072930539 40 6,5 072930540 41 7 072930541 42 8 072930542 43 9 072930543 44 10 072930544 45 10,5 072930545 46 11 072930546 47 12 072930547 48 13 072930548

7294NB 116.Greased ankle Nubuck shoe, waterproof



• Aluminium toe cap • Composite fibre penetration proof insole

EU UK  38 5 072940538 39 6 072940539 40 6,5 072940540 41 7 072940541 42 8 072940542 43 9 072940543 44 10 072940544 45 10,5 072940545 46 11 072940546 47 12 072940547 48 13 072940548

S3 HRO SRC

90 Ac_Neutro_Exp_89_96.indd 90

20/11/15 16:29

new item

Workwear

7849BL 32.Work jacket,

• T/C twill, 65% polyester, 35% cotton, 245 g/m2 

XS S M L XL XXL XXXL XXXXL



078490100 078490101 078490102 078490103 078490104 078490105 078490106 078490107

• Adjustable press-stud cuffs • Front zip closure with strap flap • Stretch waistband for improved fit • Right-side chest pocket with pen or small tool inserts • Left-side chest pocket with strap closure and insert badge • Large waist pockets • Two interior sockets

7840BL 33.Work trousers,

• T/C twill, 65% polyester, 35% cotton, 245 g/m2



XS S M L XL XXL XXXL XXXXL



078400100 078400101 078400102 078400103 078400104 078400105 078400106 078400107

• Triple stitching in points more subject to wear • Stretch waistband on sides • Metal zip closure • Two large front pockets • Large left-side pocket with strap closure and insert • Two rear pockets with strap closure • Ruler pocket with pen or small tool inserts • Hammer loop

91 Ac_Neutro_Exp_89_96.indd 91

20/11/15 16:29

7900E

7905E



XS S M L XL XXL XXXL XXXXL

44.-

69.-

Work trousers, multipocket style

Work overalls • Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2



079000900 079000901 079000902 079000903 079000904 079000905 079000906 079000907

• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

7903E 



XS S M L XL XXL XXXL XXXXL



079050900 079050901 079050902 079050903 079050904 079050905 079050906 079050907

55.Work overalls

• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

7901E

XS S M L XL XXL XXXL XXXXL



079030900 079030901 079030902 079030903 079030904 079030905 079030906 079030907

Work shorts

• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

36.

XS S M L XL XXL XXXL XXXXL

7907E 41.

XS S M L XL XXL XXXL XXXXL

Ac_Neutro_Exp_89_96.indd 92

• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m2

7909E 49.-

Work jacket

• Made of T/C canvas, 65% polyester, 35% cotton, 260 g/m²



079070900 079070901 079070902 079070903 079070904 079070905 079070906 079070907

92

Sleeveless work jacket, multipocket style



079010900 079010901 079010902 079010903 079010904 079010905 079010906 079010907



XS S M L XL XXL XXXL XXXXL



079090900 079090901 079090902 079090903 079090904 079090905 079090906 079090907

20/11/15 16:30

LIGHT 180 g 7865E

7860E

64.Work overalls, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

41.Work trousers, lightweight



078600900 078600901 078600902 078600903 078600904 078600905 078600906 078600907

• T/C twill, 65% polyester, 35% cotton, 180 g/m2





XS S M L XL XXL XXXL XXXXL



XS S M L XL XXL XXXL XXXXL

078650900 078650901 078650902 078650903 078650904 078650905 078650906 078650907

7863E 

XS S M L XL XXL XXXL XXXXL

49.Work overalls, lightweight



078630900 078630901 078630902 078630903 078630904 078630905 078630906 078630907

• T/C twill, 65% polyester, 35% cotton, 180 g/m2

7861E 35.-

7867E 39.Sleeveless work jacket, multipocket style, lightweight

Work Bermuda shorts, lightweight

• T/C twill, 65% polyester, 35% cotton, 180 g/m2

7869E





078610900 078610901 078610902 078610903 078610904 078610905 078610906 078610907

Work jacket, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

45.-

• T/C twill, 65% polyester, 35% cotton, 180 g/m2 XS S M L XL XXL XXXL XXXXL



XS S M L XL XXL XXXL XXXXL



078670900 078670901 078670902 078670903 078670904 078670905 078670906 078670907



XS S M L XL XXL XXXL XXXXL



078690900 078690901 078690902 078690903 078690904 078690905 078690906 078690907

93 Ac_Neutro_Exp_89_96.indd 93

20/11/15 16:31

LIGHT BLUE 180 g 7875E

Work overalls, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

XS S M L XL XXL XXXL XXXXL

39.-

64.-





7870E

078700900 078700901 078700902 078700903 078700904 078700905 078700906 078700907

Work trousers, lightweight

• T/C twill, 65% polyester, 35% cotton, 180 g/m2

7873E 

49.

XS S M L XL XXL XXXL XXXXL



Work overalls, lightweight

078750900 078750901 078750902 078750903 078750904 078750905 078750906 078750907

• T/C twill, 65% polyester, 35% cotton, 180 g/m2

XS S M L XL XXL XXXL XXXXL



078730900 078730901 078730902 078730903 078730904 078730905 078730906 078730907

7871E 

35.-

7877E

Work Bermuda shorts, lightweight

• T/C twill, 65% polyester, 35% cotton, 180 g/m2

38.Sleeveless work jacket, multipocket style, lightweight

7879E

• T/C twill, 65% polyester, 35% cotton, 180 g/m2



XS S M L XL XXL XXXL XXXXL



078770900 078770901 078770902 078770903 078770904 078770905 078770906 078770907

XS S M L XL XXL XXXL XXXXL



078710900 078710901 078710902 078710903 078710904 078710905 078710906 078710907

Work jacket, lightweight • T/C twill, 65% polyester, 35% cotton, 180 g/m2

45.

XS S M L XL XXL XXXL XXXXL



078790900 078790901 078790902 078790903 078790904 078790905 078790906 078790907

94 Ac_Neutro_Exp_89_96.indd 94

20/11/15 16:31

7816G 59.-

• Higher waist in rear part for increased back protection • Stretch rear insert for easier movements • Stretch waistband on sides • Two rear pockets with press-stud closure • Waist key ring

Work trousers, multipocket style

• Large side pockets with press-stud closure, one with badge insert

• T/C canvas, 65% polyester, 35% cotton, 260 g/m2 • Knee pad pockets and leg bottoms reinforced in polyester 600D 

XS S M L XL XXL XXXL



078160000 078160001 078160002 078160003 078160004 078160005 078160006

• Tearproof crotch

new item 7816BL

7815N 72.-

69.Work trousers, multipocket style

• T/C canvas, 65% polyester, 35% cotton, 260 g/m2 • Knee pad pockets and leg bottoms reinforced in polyester 600D



XS S M L XL XXL XXXL



078160100 078160101 078160102 078160103 078160104 078160105 078160106

Work trousers, multipocket style

• Twisted T/C canvas, 65% polyester, 35% cotton, 280 g/m2



XS S M L XL XXL XXXL



078150000 078150001 078150002 078150003 078150004 078150005 078150006

95 Ac_Neutro_Exp_89_96.indd 95

20/11/15 16:31

SLIM FIT 7526 59.-

• Ruler pocket and hammer loop • Two large front pockets, one with small pocket • Stone-washed

Work jeans in stretch denim cotton

• 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces • Polyester 600D reinforcements in rear pockets and on leg bottoms





075260046 075260048 075260050 075260052 075260054 075260056 075260058

XS S M L XL XXL XXXL

7525

• Cavallo antistrappo

7505M

49.Work jeans in stretch denim cotton • Made of 68% denim cotton, 29% polyester, 3% stretch fabric, 10 ounces • Stone washed



XS S M L XL XXL XXXL



075250046 075250048 075250050 075250052 075250054 075250056 075250058

85.Camouflage trousers, multipocket style • Made of 100% cotton twill, 260 g/m2



XS S M L XL XXL XXXL



075050246 075050248 075050250 075050252 075050254 075050256 075050258

96 Ac_Neutro_Exp_89_96.indd 96

20/11/15 16:32

Ac_Neutro_Exp_2 e3 .indd 4

23/11/15 14:25

Promotion subject 10 avalloDlllly