• Tool-Free guard adjustment and accessory changes
• Electronic clutch for kickback protection
• 5/8"-11 spindle
• Includes (2) XC6.0 Batteries
SALE $609.00
MIL 2967-21BXB8F
M18 FUEL™ 1/2" High Torque Impact Wrench Kit
• Up to 1,200 ft-lbs of Fastening Torque & 1,600 ft-lbs of Nut-Busting Torque
• 4-Mode DRIVE CONTROL™
• Auto shut-off mode
• Includes: M18™ XC5.0 Resistant Battery
SALE $582.00
MIL 2722-20XB8F
M18 FUEL™ SUPER SAWZALL®
Reciprocating Saw - Bare Tool
• Generate the power and performance of
a 15A corded reciprocating saw
• Variable speed trigger and 5 Speed dial
• Adjustable Shoe SALE $355.00
MIL 2903-22XB5R M18 FUEL™ 1/2" Drill/Driver Kit
• Only 6.9" in length
• Auto-Stop™ Control Mode
• 1400 in-lbs of torque
• Includes (2) XC5.0 Batteries SALE $436.00
MIL 2904-22XB8F M18 FUEL™ 1/2" Hammer Drill/Driver
• Only 6.9" in length
• Auto-Stop™ Control Mode
• 1400 in-lbs of torque
• Includes: (2) XC5.0 Batteries SALE $454.00
MIL 2834-20XB8F
M18 FUEL™ 7-1/4" Circular Saw - Bare Tool
• Up to 750 Cuts Per Charge
• Bevel detents at 22.5 and 45 degrees
• 2-5/8" Cut Capacity: Capability to cut 3x material in one pass SALE $343.00
MIL 2953-22XB5R M18 FUEL™ 1/4" Hex Impact Driver Kit
• xTri-LED Lighting
• 4-Mode Drive Control
• 2000 in-lbs of torque
• Includes (2) XC5.0 Batteries
MIL 48-11-1813XB8F M18™ REDLITHIUM™ FORGE™ HD12.0 Battery Pack
• 50% More Power vs HIGH OUTPUT™ HD12.0
• COOL-CYCLE™ Active Cooling System provides high-speed cooling for less downtime with COOL-CYCLE™ capable chargers
• 35min Supercharge to 80% with the NEW M18™ Dual Bay Simultaneous Super Charger
• Patented ingress coating
• Resistant housing
• Enhanced onboard fuel gauge
$355.00
MIL 3670-20XB8F M18 FUEL™ 4.5"-6" Braking Grinder, Paddle Switch - Bare Tool
• POWERSTATE™ Brushless Motor: Delivers 9,000 RPM
• RAPIDSTOP™ Brake
• Electronic Clutch for Kickback Protection SALE $347.00
WHAT 'S NEW
LS 23900
Magnetic Box Holder
• Two spikes on each steel holder keep the box in place whether dispensing from the top, bottom or front.
• Spikes are constructed in an opposing orientation to keep the box from slipping
• Each holder has two strong magnets
SALE $48.75
LS 23940
Magnetic Tool Holder
• Powerful 200 lb. pull magnet keeps the holder from sliding or tilting
• Designed to fit most cordless power tools
• Can also be mounted to a wall with screws
SALE $35.00
LS 88800
Radiator Genie Pro
• Interchangeable Heavy-Duty Cleaning Wands for Radiators and Other Hard-To-Reach Places
• Interchangeable 17" and 43" wands
• Use with Water or Air
• Includes M-style plug, or can be changed to any style plug, or it can be removed for use with a standard garden hose.
SALE $79.00
LS 31520
Axle Nut Socket, 12 Pin for Dodge
• Used to Remove and Install the Hub Bearing Retaining Nut On 2019 and Newer Ram 3500, 4500 and 5500 Heavy Duty Trucks with 12" Axles.
• May work on other vehicles with 3.125" O.D. Axle nut
SALE $49.00
LS 92202
Jeepers Creeper Seat
• Heavy-Duty Steel Creeper Seat
• 2" vinyl covered pad for comfort
• -Stable 19" x 14.5" footprint, 16-1/4" tall
• 500 lb. capacity SALE $171.00
LS 41840
Slack Adjuster Rod Pin Press
• Spring-Loaded Plunger Automatically Centers the Press on the Slack Adjuster Rod Clevis Pin, For Easy Removal.
• Tool is designed to shear off the cotter pin, or the cotter pin can be ground off. Works on most models of automatic slack adjuster rod pins found on class 6-8 trucks and equipment.
SALE $80.00
LS 41850
Brake Clevis Pin Press
• Spring-Loaded Plunger Automatically Centers the Press on the Brake Clevis Pin, for Easy Removal
• Tool is designed to shear off the cotter pin, or the cotter pin can be ground off. Works on most models of automatic slack adjuster rod pins found on class 6-8 trucks and equipment
SALE $107.00
Battery Mount (6 Pack)
Batteries locks into place so can be mounted in any direction
Bit Holder (2 Pack)
• Magnetic bar on the side of the bit holder for extra bits, screws, etc.
• Magnet holds bits while tool is in use and can be mounted in any direction
Tool Mount (4 Pack)
• Slide tools on and off fast
• Maximize under shelf space
• Made of tough injection moulded ABS
LS 31510
Axle Nut Socket, 9 Pin For GM
• Used to Remove and Install the Hub Nut on 2020 and Newer Silverado and Sierra 2500/3500 Trucks With 11.5" and 12" Dual Rear Wheel Axle Hubs.
• May work on other vehicles with 2.97" O.D. Axle nut
SALE $35.00
IRW IRHT83100
QUICK-LIFT™ Construction Jack
• Lifts up to 10"
• Lifting capacity up to 330 lb
• Precision controlled lowering
• No load quick release
SALE $128.00
WorkStar® 361 Rechargeable LED Zoom
Penlight/Inspection Light USB-C
• 300 lumens of brilliant, white light
• USB-C rechargeable, cable included
• Commercial grade aluminum construction
• Includes 3 Bite Caps
• Focusable between spot and flood beams
• Dust-tight, waterproof to 3 feet
• Compact, lightweight 2 oz.
MIL 2359-20
M18™ ROVER™ Compact Folding Flood Light w/ USB Charging
• Patented and unique bi-directional design enables loosening & tightening of new and damaged hex fasteners
• R.P.T. Technology prevents rounding of new and compromised fasteners
SALE $500.00
WHAT 'S NEW
MT S-581E
Precision Digital Tire Inflator & Pressure Gauge (0-160 PSI), Extreme ± 0.25% Accuracy with EZ-LOCK™ Air Chuck
• Provides high accuracy in checking tires
• Comfortable to read at different angle
• 24" hose length to access hard-to-reach areas
• LED Flashlight provides easy lighting to work faster
SALE $199.00
MT PMXM250STB
PowerDrive Drill/Driver
Threaded Bit Adapter
• 1/4" Power Drive adapter that transforms your ratchet into a powerful drill
• 1/8" cobalt drill bit
• Designed to access the tightest spaces
• Manufactured to eliminate frustrating drill bit slips
MADE IN THE USA
SALE $64.50
THA 69204 Foldable Automotive Engine Creeper
• Topside creeper movable ladder for trucks workstation, shop mechanic, fleet, emergency repair and home garage
• Heavy-duty Material
• 4 Rotating Wheels, Help you move easily and safely around your vehicle. SALE $325.00 TTN 51772
2 Pc. Flexible Hanger Set
• Flexible hangers are pliable for bending and maneuvering
• Can retain shape for repeated use
5 Pc. Wheel Hub Cleaning Pads
• Blast away dirt, corrosion, and dust for a safe, precise, secure wheel installation
• Abrasive pads for cleaning brake hubs, wheel studs and wheel mounting surfaces SALE $25.00
PPR KPS-DT10CBINT
Voltage Tester
• Non-contact voltage detection
• Voltage range: 90V-1000V AC
• Frequency: 50/60Hz
• Acoustic and LED indicate
• CAT II 1000V according to EN61010
SALE $10.25
PPR KPS-SN10
Digital Sound Level Meter
• Class II digital sound level meter according to IEC 651
• Display: 2,000 counts
• Sample rate: 2 times per second
• A/C weighting selection
• MAX values
• FAST/SLOW selection
• Data hold SALE $90.00
THA 62037
3.5 Ton Safety Lock Jack
• Safety lock in 3 positions
• Min / Max Height: 5.5" / 20"
• Product Size: 27.16’’ x 14.56’’ x 7.48’’ SALE $250.00
PPR KPS-MT700
Digital Multimeter with USB Connection
• Display: 6600 counts
• DC/AC voltage, DC/AC current
• Non-contact voltage detection
• Diode check and continuity buzzer
• MAX / MIN values, relative measurements
• CAT III 1000V / CAT IV 600V according to EN 61010
SALE $109.00
PPR KPS-MT30
Digital Multimeter
• Display: 2000 counts
• DC/AC voltage, DC/AC current and resistance measurement
• Diode check and continuity buzzer
• CAT III 600V according to EN 61010
SALE $21.45
PPR PPDRAWCBINT
Parasitic Drain Monitor
• Capable of delivering up to 10 amps continuous current thru Smart battery output
• Supplies power and monitors the vehicle's electrical system for Parasitic Draw
• Connects via 16 pin ODBII Connector
• View and record data via Bluetooth on App SALE $227.00
TPN TC001PLUS
Dual-Lens Thermal Imaging Camera for Android & Windows
• Dual Lens to Unveil the Unseen
• Ultra-high IR camera resolution of 256x192 pixels
• Temperature range from -4°F to 1022°F
• Seamless temperature detection and data analysis with the TCView desktop software and TopInfrared app
SALE $286.00
TPN TS004
TS004 Thermal Monocular
• 13mm lens -spots targets up to 450 yards, recognition range up to 100 yds
• 256 x 192 high resolution and rapid 50Hz refresh rate w/ 8x zoom
• 5 color palettes - Bird, White Hot, Black Hot, Red Hot, Fusion
• IP67 waterproof rating – 2M Drop Proof
• 11 hours of battery life w/ built-in 32GB storage
• Connect to your phone via the TopInfrared App
SALE $450.00
EZR EZHP
Extendable Aluminum Hood Prop
• Adjustable to 6 different positions
• Rubber tips on both ends, the hood
• Double locking system to extend hood prop 31"–60"
• Aluminum construction and NBR & PVC grip
SALE $47.00
EZR EZPWRTH
Magnetic & Adjustable Power Tool Holder
• Each hook can be independently positioned
• Embedded magnets and integrated screw
• Holds tools from 1-1/2–4" wide
• Padded hooks for extra grip and delicate surface protection
• 15-lb holding capacity
SALE $21.95
TPN BTMPROS
BTMobile ProS 12V Battey & System Tester Compatible w/Phoenix Line
• Turns Your TOPDON Diagnostic Scan Tool Into a Battery Tester
• Compatible to Phoenix Line of Diagnostic Scanners
• 3 LED Indicators
• Battery, Cranking and Charging Tests
• Tablet Compatibility
• Ideal for Cars, Light Trucks, RVs, Motorcycles, ATVs, Boats, and More
SALE $122.00
TPN V4500PLUS
2-in-1 4500 Peak Amp Jump
Starter & Battery/System Tester
• 4500A HD 12v Jump Starter for gas and diesel up to 16 liters
• Battery Tester and monitor battery status through app
• 45 jump starts on a single charge
• Dual USB QC 3.0 fast charging ports + 12v DC output port
• HD LED display w/ 500 lumen LED light
• Recharge from 0%-100% within 90 minutes
• 1 year warranty
SALE $264.50
STK 21470
5 Pc. Clip Remover Set
• Assorted trim clip tools
• 5 tools with openings from 5mm to 13mm
• Sturdy Metal Construction
• Ergonomic Rubber Handles
SALE $119.00
AUT MD600CV MaxiDiag MD600CV
• Wireless Android tablet for Light, Medium and Heavy-duty vehicle diagnostics and service, compatible with Class 3 to Class 9 vehicles
• Read and erase codes, View Freeze Frame and Live Data
• Performs common maintenance and service tasks specific to heavy duty vehicles, including DPF Regen, Idle Shutoff, Oil Light Reset, Brake Bleed, Throttle Body Relearn, and Injector Coding/Reset
• Includes Wireless VCI and supports J1708, J1939, J1587, J1850, CDL, PLC, and VPW protocols
• 5.5" HD Touchscreen Display, Diagnose Hairline Cracks with Clarity
• Draw, Add Audio, & Trim for Clear Documentation
• Includes: M12™ CP2.0 Battery Pack SALE $1,699.00
MIL 3150-20
M12™ Auto Technician Borescope - Bare Tool
• Front & side view
• Field-replaceable camera cable
• 4-Level zoom adjustment
• Capture photo & video, conveniently export via SD card
• 4.3” Rotatable Screen
• 3' camera cable
• 5-Level adjustable LED brightness SALE $489.00
MIL 2278-20
M12™ 12:1 Infrared TempGun™ - Bare Tool
• Measures surface temperatures -22⁰F to 1022⁰F
• 12:1 distance-to-spot ratio
• Premium LCD display
• High/Low Temperature Alert
• Hold, Max, Min, Avg, Diff Modes SALE $149.00
•
•
• Included 1/8" collet
MIL 2485-22XB4XP
M12
• 0.3 HP Motor Output
$180.00 VALUE!
• Optimized RPM setting for most common accessories ✓ Mode 1=10,000, Mode 2=15,000, Mode 3=20,000
• Includes (2)
MIL 2460-20
M12™ Rotary Tool, Bare Tool
• 1/8" Collet
• Variable Speed (5,000–32,000 rpm)
• Compact and lightweight - only 9.5" long and 1.3 lbs
SALE $119.00
Aluminum
• Tool Free 360 Degree Die Holder Rotation
• Chip Collection Bag Included for Easy Clean Up SALE $285.00
MIL 2526-21XC
M12 FUEL™ Oscillating Multi-Tool Kit
• 10,000 to 20,000 OPM
• Variable Speed Dial
• Oscillation Angle: 3.9º for Faster Cutting
• Vibration Dampening Technology
• Includes XC4.0 Battery SALE $322.00
•
•
$119.00
•
• Optimized RPM setting for most common accessories ✓ Mode 1=10,000, Mode 2=15,000, Mode 3=20,000, Mode 4= 24,500
• Includes: (2) CP2.0 Batteries
MIL 2486-20 M12
MIL 2550-22
M12™ Rivet Tool Kit
• Pull Up to 3/16” Stainless Steel Rivets
• 2,000 lbs. Pulling force
• Pull 3/32”, 1/8”, 5/32”, 3/16” Rivets
• Tool holds rivet in any orientation
• Includes (2) 1.5 battery packs
SALE $522.00
MIL 2485-20 M12 FUEL™ 1/4" Right Angle Die Grinder - Bare Tool SALE $249.00
MIL 2483-20
M12 FUEL™ 3/8" × 13" Belt Sander - Bare Tool
• 2 Speed Adjustment Settings
• Forward & Reverse
• Lock-on Button
• Variable Speed Trigger
• 360 Degree Arm Rotation
• Tool-Free Belt Change
M12™ Soldering Iron
• Heats Quickly, Maintains Optimized Temperature
• Ready-to-Use & Safe-to-Store Tip Indicator
• 3-Stop Pivoting Head for Unmatched Access
• 18 Second Heat Up Time
• Includes: Chisel and pointed tips
2488-21
MIL 0960-20
M12 FUEL™ 1.6 Gallon Wet/ Dry Vacuum - Bare Tool
• Highest performing 12V cordless vacuum
• On-board accessory storage
• Built-in blower port
• Just 87 dB(A)
SALE $188.00
MIL 2579-20
M12™ Stick Transfer Pump - Bare Tool
• 3/4” Outlet Attaches to Standard Garden Hose
• Up to 9 Gallons Per Minute
• Up to 275 Gallons on (1) M12™ REDLITHIUM™
XC4.0 Battery (not included)
• 360° Filter Maximizes Flow in Heavy Debris
• 36” Submersible Barrel for Easier Inlet Control
• Threaded Filter Designed for Easy Removal
OVERSIZED ITEM ADDITIONAL SHIPPING MAY APPLY SALE $279.00
• Includes: (2) 60 Grit Sanding Belts SALE $299.00
MIL 2535-20
M12 FUEL™ 3" Random Orbital
Detail Sander - Bare Tool
• POWERSTATE™ Brushless Motor: Generates the power to deliver 10K max OPM under load for faster material removal
• Integrated Dust Control
• Random Orbital sanding motion with 3/32" (2.5mm) orbit diameter delivers a scratch-free stain grade surface finish
• Included Tool Holster
• Pad saver protects against excessive heat buildup to extend the life of the backing pad material
• Sponge pad allows the abrasive to contour to the work surface when working with complex trim profiles
$257.00
MIL 2438-22X M12™ Variable Speed Polisher/Sander Kit
• M12™ XC 3.0 and M12™ CP1.5 Battery
• 3" Polishing backing pad; 2" Sanding backing pad; wool pad; Yellow foam pad; and White foam pad SALE $295.00
MIL 2951-20
M12™ Radio + Charger - Bare Tool
• 12V DC port for charging of M12™ Batteries
• Full-range speaker and tweeter
• Bluetooth 4.2 & AM/FM radio
• 2.1A USB output, 10 hour of run-time SALE $179.00
MILWAUKEE M12™ CORDLESS TOOLS
MIL 2520-20
M12 FUEL™ HACKZALL®
Recip Saw - Bare Tool
• One-handed design provides superior control & versatility
• POWERSTATE™ Brushless Motor
• Compact size allows for cutting in tight spaces SALE $214.00
MIL 2420-20
M12™ HACKZALL®
Recip Saw - Bare Tool
• Variable Speed Trigger
• Keyless QUIK-LOK™ Blade Clamp
• Accepts both HACKZALL™ and SAWZALL® style blades SALE $124.00
MIL 2533-20 M12 FUEL™ 8" Hedge Trimmer - Bare Tool
• Increased control and access
• Power to cut 1/2" branches
• Fastest cutting
• 3.6 lbs with battery SALE $285.00
MIL 2534-20
M12™ Brushless Pruning
Shears - Bare Tool
• Power to cut 1-1/4" branches
• Up To 1,000 cuts per charge in 1/2" branches
• Slim, ergonomic grip SALE $285.00
•
•
MIL 0852-20
M12™ Compact Spot Blower - Bare Tool
• More controlled, faster cleanup
• 2-modes & variable speed trigger
•
•
• Compact size & rubber nozzle for tight spaces
MIL
MIL 2126-20
M12™ Underbody Light - Bare Tool
• Light head swivels 300° horizontally & 180° vertically
• Magnetic base
• 1,200 lumens of trueview™ high definition output
• 3 power modes
• 12" magnetic storage tray
SALE $255.00
MIL 49-24-0146
M12™ LED Worklight - Bare Tool
SALE $58.00
MIL 2367-20
M12™ ROVER™ Service & Repair Flood
Light with USB Charging - Bare Tool
• 700 Lumens of TRUEVIEW™ High Definition Output
• Survives drops up to 9 feet
• Water and dust resistant
• 110° pivoting light head
• Up to 24 hours of run-time
• Integrated magnetic mounting
• 2.1Amp USB output
• 5 Year tool/limited lifetime LED warranty
SALE $88.00
MIL 2127-20
M12™ Paint & Detailing Color Match Light - Bare Tool
• 98+ Color Rendering Index to Replicate Natural Sunlight
• 1000 Lumens to Illuminate Metallics and Identify Scratches in Paint
• Cycle Through 5 Color Temperatures and 3 Brightness Modes for Complete Control
SALE $256.00
MIL 2191-21
any direction
• Impact resistant, reinforced legs SALE $229.00
MIL 48-11-2420
M12™ REDLITHIUM™ CP2.0 Battery
Delivers up to 2X more runtime, 20% more power and 2X more recharges
SALE $93.00
MIL 48-11-2425
M12™ REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery Pack Delivers 25% more power and runs 25% cooler SALE $109.00
MIL 48-11-2430
M12™ REDLITHIUM™ 3.0
Compact Battery
Delivers up to 3X more runtime, 20% more power and 2X more life
SALE $95.00
MIL 48-11-2440
M12™ REDLITHIUM™ XC4.0
Extended Capacity Battery
Delivers up to 2X more runtime, 20% more power and 2X more recharges
SALE $124.00
MIL
up to 3X more runtime, 20% more power and 2X more recharges
REDLITHIUM™ USB Bluetooth® Jobsite Ear Buds
• Jobsite Aware Mode Provides Controllable Situational Awareness while Reducing the Intensity of Loud External Noises
• Up to 10 Hours of Runtime on a Single Charge
• Bluetooth® 5.1 Provides up to 55' of Range
• Passive Hearing Protection
• Water and Dust Resistant
• Impact Resistant
• Control Calls and Audio With Easy-to-use Buttons
SALE $219.00
• Up to 1,200 ft-lbs of Fastening Torque & 1,600 ft-lbs of Nut-Busting Torque
• 4-Mode DRIVE CONTROL™
• Auto shut-off mode
• Includes: M18™ XC5.0 Resistant Battery
• 1/2"
✓ Up to 1,200 ft-lbs of Fastening Torque & 1,600 ft-lbs of Nut-Busting Torque
• M18™ 2-Speed Grease Gun (2646-20)
• M18™ XC5.0 Resistant Battery & CP2.0 Battery SALE $651.00
MIL
MIL 2760-20
M18 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver
• POWERSTATE™ Brushless Motor
• FLUID-DRIVE™ Hydraulic Powertrain reduces metal on metal contact within the tool, delivering quieter operation, smoother performance, and increased durability over a standard impact
SALE $222.00
MIL 2769-22R
M18 FUEL™ 1/2" Extended Anvil High Torque Impact Wrench with ONE-KEY™ Kit
• Four customizable fastening modes
• Up to 1,100 ft/lbs of nut busting torque in all modes
• Includes (2) XC5.0 Resistant Batteries MADE IN THE USA SALE $809.00
•
•
•
• 1/2" Hammer Drill/Driver (2904-20)
• 1/4" Hex Impact Driver (2953-20)
✓ 2000 in-lbs of torque
✓ 4-Mode Drive Control
MIL
MIL 2660-21CT
M18 FUEL™ 1/4" Blind Rivet Tool with ONE-KEY™ Kit
• Installs 3/16", 7/32", 1/4" and 9/32" aluminum, steel and stainless-steel rivets
• Delivers 4,500 lbs of pulling force
• 1.18" Stroke Length
• Includes: CP2.0 battery, charger and 4 retention nose pieces
$1,199.00
MIL 2848-20
M18™ Inflator - Bare Tool
• Fastest 18V Cordless Tire Inflator
• Truefill™ Technology: Automatic Shut- off at Selected PSI Prevents Overinflation
• Over 100 PSI, Rated for 150 PSI Max
• Save Your Most Used PSI Rating With Up to 4 PSI Slots
• Anti-Vibration Feet: 36" hose length
• 5 Year Tool Warranty
SALE $219.00
MIL 2661-20
M18 FUEL™ 1/4" Lockbolt Tool with ONE-KEY™ - Bare Tool
• Installs HUCK™ Bobtail®, Magna Grip® and C6L® Lockbolt Fasteners
• Compatible with HUCK™ Lockbolt Tip Models 99-7932, 99-7932CC, 99-2555, 99-3417, 99-3201, 99-3204, and 99-3464.
• Delivers 4,500 lbs of pulling force
• Installs 3/16” (4.8mm), 7/32” (6.0mm), 1/4” (6.4mm) and 9/32” (7.0mm) aluminum, steel, and stainless steel Blind Rivets with purchase of M18 1/4” Lockbolt to Blind Rivet Tool 49-16-2661R
• Installs HUCK™ Hucktainer Fasteners with purchase of Hucktainer Fastener Adaptor 49-16-2661HT
SALE $1,639.00
MIL 2771-20
M18™ Transfer Pump
• Self-priming, connect and go
• Head height: up to 75'
• Pumps up to 480 GPH Lift up to 18'
• Inlet / outlet connection: 3/4" brass
• Weight: 8 lbs
SALE $315.00
•
•
MIL 2840-20XB8F
M18 FUEL™ 2 Gallon Compact Quiet Compressor - Bare Tool
• The quietest cordless compressor at only 68dB(A)
• Compact for easy carrying
• Up To 1600 Nails Per Charge SALE $565.00
MIL 2881-20
M18 FUEL™ 4-1/2" /
•
•
•
•
• 5/8"-11 Spindle
•
•
• Paddle switch design
• Tool-Free Guard Adjustment
• Tool-Free Accessory Changes
• Electronic Clutch for Kickback Protection
• 5/8"-11 spindle
•
MIL 2834-20XB8F
M18 FUEL™ 7-1/4" Circular Saw - Bare Tool
• Up to 750 Cuts Per Charge
• Bevel detents at 22.5 and 45 degrees
• 2-5/8" Cut Capacity: Capability to cut 3x material in one pass SALE $343.00
MIL 2722-20XB8F
M18 FUEL™ SUPER SAWZALL® Reciprocating Saw - Bare Tool
• Generate the power and performance of a 15A corded reciprocating saw
• Variable speed trigger and 5 Speed dial
• Adjustable Shoe SALE $355.00
MIL 3670-20XB8F M18 FUEL™ 4.5"-6" Braking Grinder, Paddle Switch - Bare Tool
• POWERSTATE™ Brushless Motor: Delivers 9,000 RPM
• RAPIDSTOP™ Brake
• Electronic Clutch for Kickback Protection SALE $347.00
MIL 2939-20
M18 FUEL™ Braking Die Grinder, Slide Switch - Bare Tool
• Generating 11A corded power, it gives users the power they need to replace corded solutions
• RAPIDSTOP™ Brake stops in under 2 seconds
• Spindle Lock, one wrench accessory change
• Slide Switch, designed to reduce user fatigue
• Fits all 1/4" shank accessories
• 27,000 RPM Brushless Motor SALE $342.00
•
• RAPIDSTOP™ Brake
• Tool-Free guard adjustment and accessory changes SALE $295.00
MIL
MIL 2880-20
M18 FUEL 4-1/2"
•
•
2 Pack M18™ REDLITHIUM™
XC5.0 Resistant Battery Resistant housing designed to provide increased protection against exposure to common oils, greases, and solvents SALE $325.00
MIL 48-11-1852FL M18™ ROVER™ Dual Power Triple-Panel Light $251.50 VALUE!
48-11-1852GRN
• Up to 750 Cuts Per Charge
• Bevel detents at 22.5 and 45 degrees
• 2-5/8" Cut Capacity: Capability to cut 3x material in one pass
• Includes: M18™ FORGE™ HD12.0 Battery Pack SALE $682.00
MIL 2635-20
M18™ 18 Gauge Double Cut Shear - Bare Tool
• Redesigned body and an inline wrist design maximize control
• 360º Tool-Free Rotating Head
• Steel capacity: 18-Gauge
• Stainless steel capacity: 20-Gauge
• Variable Speed Trigger SALE $357.00
•
•
•
MILWAUKEE M18™
MIL 3013-20XB8F
M18 FUEL™ Telescoping Pole Saw - Bare Tool
INCLUDES FREE M18™ REDLITHIUM™ FORGE™ XC8.0 BATTERY PACK $285.00 VALUE!
• Variable Speed Trigger
• Automatic oiler
SALE $464.00
• Power to cut hardwoods
• Easy access chain tensioner
• Metal bucking spikes
• Translucent oil reservoir
• Automatic oiler
• Onboard storage for scrench SALE $395.00
•
• POWERSTATE™ Brushless Motor delivers the power to complete cuts in demanding extended reach applications providing up to 2.35HP peak power
• 9 feet to 13 feet of adjustable length
• 25m/s chain speed delivering fast clean cuts
• Robust metal branch hook
• Onboard scrench storage
• Side access chain tensioner for quick adjustment to chain tension
• Intuitive trigger lock off for user protection and increased control
• Automatic oiler to ensure proper lubrication of the cutting system
MIL 3008-20XB8F
M18™ Brushless Telescoping Pole
Pruning Shears - Bare Tool
INCLUDES FREE M18™ REDLITHIUM™ FORGE™
XC8.0 BATTERY PACK $285.00 VALUE!
• Fast, Clean Pruning. No Manual Pulling.
• 3X Faster Compared to Manual Solutions
• 7' - 10' Telescoping Length - Attachment Free Extended Reach Pruning Up to 10'
• Power to Cut 1-3/4" Branches
• Up to 2,000 Cuts per Charge in 1" Branches
• High Strength
•
•
Tool, Utility Tool, Brush Tool, Vacuum Filter, and Foam Pre-Filter SALE $279.00
MIL 0920-20
M18 FUEL™ 9 Gallon Dual-Battery Wet/Dry Vacuum - Bare Tool
• Outperforms 4.25 Peak HP Wet/Dry Vacuums, delivering more cleaning power than corded
• MAX RUN-TIME MODE delivers up to 49 minutes of continuous cleaning time on (2) HD12.0 Battery Packs
• 1-7/8” x 9’ Flexible Hose, Crevice Tool, Utility Nozzle, and (2) Extension Wands OVERSIZED ITEM ADDITIONAL SHIPPING MAY APPLY SALE $433.00
• Sound Power Level: 87 dB(A)
• Built-in blower port
• High/Low Switch
• On-board accessory storage SALE $254.00
MIL 0910-20
M18 FUEL™ 6 Gallon Wet/ Dry Vacuum - Bare Tool
• Outperforms 3.5 Peak HP Wet/Dry Vacuums, delivering more cleaning power than corded
• MAX RUN-TIME MODE delivers up to 47 minutes of continuous cleaning time on an HD12.0 Battery Pack
• Integrated accessory storage
• 87 CFM & 60” of Suction
• Includes: 1-7/8” x 9’ Flexible Hose, Crevice Tool, Utility Nozzle, and Extension Wands OVERSIZED ITEM ADDITIONAL SHIPPING MAY APPLY SALE $325.00
MIL 49-90-1900 HEPA Filter
For use with Milwaukee 2 Gallon Wet/Dry Vacuum (0880-20), M12 FUEL Wet/Dry Vacuum (0960-20), and M18 FUEL PACKOUT Vacuum (0970-20). SALE $35.50
MIL 0882-20 M18™ Compact Vacuum - Bare Tool SALE $185.00
MIL 0885-20 M18 FUEL 3-in-1 Backpack Vacuum - Bare Tool
• Cyclonic Technology: Powerful suction, long filter life, and easy-empty bag less debris collection
• Removable harness, integrated canister hook and handle
• Certified HEPA filter SALE $419.00
MIL 0880-20 M18™ Wet/Dry Vacuum
- Bare Tool
• Powerful motor
• On-board accessory and hose storage
• Built-in blower port
• Reusable wet/dry filter SALE $139.00
M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Two Pack SALE
NEW
MIL 2368-20
M18™ ROVER™ Dual Power Triple-Panel Flood & Area Light
NEW
• 4,500 Lumens of TRUEVIEW High-Definition Output
• Integrated Hook, Magnets, and Keyholes for Jobsite Mounting
• Powered by M18™ REDLITHIUM™ Batteries or a 120V AC Extension Cord SALE $251.50
NEW
MIL 2359-20
M18™ ROVER™ Compact Folding Flood Light w/ USB Charging
• Instantly set rivet nuts with the pull of the trigger.
• Quickly un-thread set rivet nuts by operating free spinning rear wheel
• Max Capacity: M10 (3/8”) steel and aluminum rivet nuts, M6 (1/4”) stainless rivet nut SALE $289.25
HD Air Riveter Air Pressure: 90–120 psi
MS 39058 1/4" Air/Hydraulic Riveter
Can be used to set diameters of blind rivets 3/32"–1/4" diameter in all metals SALE $502.50
• Free Speed: 10,000 rpm
HUK AK175A Air Power Hydraulic Riveter
• Compact and powerful (3500 lbs pulling force)
• 5/8" Travel allows most rivet installation in one pull
• Sets aluminum, steel and stainless rivets up to 1/4"
• 1/8" thru 1/4" Merely by changing nosepiece
SALE $467.00
•
•
• Includes needle scaler attachment with 12 mm high tension steel needles
• Comes complete with flux chisel
• Needles: 3 × 12 7" stroke Speed: 4200 bpm
APT 401K
0.401" Shank “THOR” Long Barrel Air Hammer/Riveter
• Newly designed tilt valve trigger for sensitive power adjustment
• Internal brake vibration damping system for less fatigue
• Includes quick change chuck, 10.25" length, Hi-Flo fittings suggested
$147.50
APT 401K3
3 Pc. Heavy Duty THOR Air
Hammer Bit Set .401 Shank
• Astro’s new proprietary THOR hammer alloy specifically developed for air hammer bits used in the highest power air hammers
• Includes 3 .401" shank 1" diameter hammering bits in 4", 7" and 12" lengths
SALE $38.50
APT 401K6
Heavy Duty THOR Air Hammer, Chisel & Cutter Bit Set .401 Shank
• Astro’s new proprietary THOR hammer bit alloy specifically developed for the highest power air hammers
• Includes 2 cold chisels, 3 cutters and one 7″ hammer SALE $47.00
MLK EQ-290 300
Heavy Duty VIBRO-IMPACT® Air Hammer
• Loosen tight connections on trucks, agricultural and construction vehicles, etc
• The high performance air hammer helps to disassemble e. g. conical seat connections, wheel bearings, bushings, rusted screw connections.
• Can support pullers as well
• Drive: 15mm/ 5/8" 6-Kant / HEX
• 3/8" air nipple and 1/2" air hose
• Impacts / min: 2.500 BPM
SALE $793.60
MAX Vibration Reduced Air Hammers
• Tool vibration reduced by 30%
• Swivel air inlet
• Generates 15% more impact force over standard air hammers
IR 135MAX 135MAX HD Air Hammer
• 2,600 BPM
• Break at lightspeed with the most powerful air hammer available
• Feather-able trigger for ultimate control SALE $291.00
LTI 855A
Texas Twister Air Hammer Pulling Kit
• NOW INCLUDES two NEW puller connectors - 1/2-20 to 5/8" and 1/2"-20 to 3/4" to connect the Texas Twister to your 5/8" & 3/4" slide hammer bits and pullers
• Extended reach with 20" extensions SALE $305.00
SX SX246 Pistol Grip Needle Scaler
• Perfect for surface prep work
• Equipped with 19 hardened steel needles for a long life
• 1-5/8" piston stroke and 4,500 bpm
• Aluminum housing SALE $106.25
IR 125-A Air Percussive Scaler
• 4,800 BPM
•
POWER TOOL ACCESSORIES
•
•
•
•
•
•
•
•
POWER TOOL ACCESSORIES
CEN 26529
29 Pc. Pro Grade Cobalt Drill Bit Set
• 1/16" to 1/2" by 64ths drills
• Designed to cut through extremely hard metals.
• No center punch needed: 135º Quick-cut points are self-centering and will not "walk" or "wander". MADE IN THE USA
SALE $244.50
CEN 24329
29 Pc. Drill Buddy Jobber Length Drill Bit Set
• Sizes: 1/16" through 1/2" by 64ths
$233.00 KNK 13KK10 13 Pc. Mechanics Length Step Point Drill Bit Set
• Sizes: 1/16"- 1/4" by 64ths
• Great for
•
29 Pc. Pro Grade Black Oxide Drill Pod Set
• 1/16" to 1/2" by 64ths drill bits
• M2 grade steel for drilling common steel
• Manufactured to Aerospace NAS 907-B specifications
MADE IN THE USA
SALE $136.00
CEN 88721
21 Pc. High Speed Steel Drill Bit Set, 1/16"–3/8"
Premium high speed steel and duotone finish for fast chip removal SALE $30.50
CEN 17905
5 Pc. Stubby Hex Drill Set
• Shorter length for hard to reach areas
• 135º Quick-cut point
• Includes 3/32", 1/8", 3/16", 1/4",and 5/16" drill bits
• Set includes ball, cylinder, domed, sphere and tree style rotary rasps
3 Pk. 3.5" 4-Ply Wool Curved Edge
• Micro Compounding & Buffing Pads
• 100% 4-ply twisted wool
• For buffing or compounding
SALE $17.95
3.5" Cool-It® Micro Waffle Pads
Curved - Loop Backing - 2 Pk.
Specially designed pattern cut in the foam which opens up as the polishing machine is in operation relieving pressure on the painted surface to ″COOL-IT®″. Traps excess polish and compound to keep the surface lubricated to prevent swirls, paint burning, separation and greying.
TTN 22206
6 Pc. Crimped Wire Brush Assortment
• Brass coated carbon steel brushes
• Made of carbon steel crimped wire
• 1/4" quick change hex shank SALE $9.99
TTN 22209
4 Pc. Crimped Wire Brush Assortment
• Brass coated carbon steel brushes
• 1/4" quick change hex shank SALE $9.25
TTN 22236 2-1/2" Knotted Wire Bowl Cup Brush
• Twisted carbon steel wire prevents fraying during use
• To be used with a grinder with a 5/8-11 arbor SALE $6.50
TTN 22230 4" Crimped Wire Cup Brush
• Constructed with brass coated steel wire for durability
• To be used with a grinder with a 5/8-11 arbor SALE $13.30
TTN 85163
3 Pc. Drill Brush Set
• For use with impact guns, cordless drills, and standard drill chucks
• Three different sized brush heads
• Polypropylene plastic block
• Corrosion resistant zinc/nickel plating
• Sculpture and deburr wood, plastic or soft metals
• 1/4" shank fits die grinders and standard drill drivers
•
• 1/4" quick change shaft
• Bristle rating: Hard" SALE $12.65
IPA 8080
6 Pc. Twisted Wire Bore Brush Set
• Stainless steel
• Do not exceed 600 rpm
•
100 Pk. 3" Cut-Off Wheels
• 46 Grit -- 1/16" thick
• 3/8" Arbor hole
• Comes in plastic bin MADE IN THE USA
POWER TOOL ACCESSORIES
$85.50 SHK 16406
SG 17220 Autobody Skinner Brush with Arbor
• Wire bristles are encapsulated in a special material to extend brush life and promote aggressive brush action.
• Fits any 1/4" drill.
• Maximum safe speed 18,000 RPM.
MADE IN THE USA
SALE $56.00
SHK 13106
5 Pk. Aluminum Oxide Flap Wheels 1″ x 1″ x 1/4″ Shank – 80 Grit Resin bonded grain to cloth backing for excellent performance SALE $24.00
Surface Preparation Discs
MADE
Pc. 1" Mini Surface
Kit with Holder A must for any mechanic, these miniature 1” surface preparation discs and strip-brite discs are available in this handy 19 piece kit that includes the holder.
Finger Discs, 10 PK
SHK 13995
Mini Knotted Wire Brush –2" × 1/4" Shank – .020 Wire Good for general purpose cleaning or polishing SALE $9.25
SHK 14096
SG 17130
2-1/2" Wire Cup Brush
• Made of fatigue resistant, 0.014" crimped steel wire.
• Removes paint, carbon, rust and corrosion.
• Has 1/4" shank and fits all portable drills.
• Maximum safe speed 5,000 RPM
SALE $15.50
3-in-1 Diamond Grinding Wheels
• Last a 2000% longer than traditional wheels
• Material: Industrial, Diamond Abrasive
• Speed: 30,000 rpm max.
• For use on all ferrous metals, Can also be used on aluminum with proper lubrication
SHK 13962
12935 1/4" & 3/8" Mandrel Set
• 3 Piece mandrel set for cut-off wheels.
• Consists of a 1/4" and 3/8" screw to accommodate use of any cut-off wheel with a 1/4" and 3/8"
1" Crimped End Brush on 1/4" Hex Shaft – .012 Coarse Wire SALE $6.00
Wire Wheel – Mounted Cup 2-1/2" × 1/4" Shank. Coarse .020 Wire SALE $6.50 SHK 13979 3" Plastic Encapsulated Wire Wheel on 1/4" Mandrel 4,500 RPM SALE $15.25
MK 724115-A-25
25 Pk. 4-1/4" Super Thin Cut-Off Wheels
• Cuts up to 50% faster and lasts up to 20% longer
• A46 Grit
• 3/64" Thickness
SALE $59.00
Brite-Prep™ Surface Preparation Discs, Type R, 50 Pack
ADAPTERS & EXTENSIONS
GWR 86524
17 Pc. 1/4", 3/8", 1/2" Impact Drive Tool Accessories Set with EVA Foam Tray Includes 1/4", 3/8" & 1/2" drive extensions, universal joints and adapters
VIM DSPA200
3 Pc. Impact Dual Swivel Pinless Adapter Set
SALE $94.00
TTN 12082
3 Pc. Socket Adapter Set
• Adapts sockets to power drills and drivers
• 1/4" and 3/8" drive Extension Bar
• Detent ball for secure socket retention
3500 4 Pc. 3/8" Impact Extension Set
• Sets Include: 3", 5", 10", and 15"
•
• Steel ball retainer on male end
Transmissions, SAE 36"
• Steel ball retainer on male end
• Sunex Lifetime Warranty SALE $84.25
design
• Enjoy up to 30% more torque delivered to fasteners when used at max angle
• Forged Cro-Mo construction, durable 100% pinless design with 360° of freedom SALE $153.25
• Enjoy up to 30% more torque delivered to fasteners when used at max angle and 20% more when used straight SALE $198.00
•
• 30º Flex angle smooth 360º rotation
• Made from chrome molybdenum
4 Pc. Ball Extension Sets
GP 103RA 3 Pc. Adapter Set •
• Low profile design
• Magnetic retention
GP 2229UJ 1/2" Drive x 1/2" Friction Ball U-Joint SALE $29.00
• 2-3/4" Overall length
• 1/4" Shank SALE $4.99
TTN 12001
6 Pc. Stubby & Wobble Socket Adapter Set
• 3 Pc. Stubby: 1/4", 3/8" & 1/2"
• 3 Pc. Wobble: 1/4", 3/8" & 1/2"
• 1/4" shank
• Limited lifetime warranty
SALE $8.79
TTN 12002
4 Pc. Impact Socket Adapter & Magnetic Bit Holder
Magnetic hex bit holder fits standard 1/4"hex bits
SALE $5.79
TTN 40000
8 Pc. Impact Adapter Set
• Chrome-moly construction for durability
• Laser etched size markings for easy identification
• Heavy duty blow molded storage case
• Set Includes: 1" F × 3/4" M, 3/4" F × 1/2" M, 1/2" F × 3/8" M, 3/8" F × 1/4" M, 1/4" F × 3/8" M, 3/8" F × 1/2" M, 1/2" F × 3/4" M, and 3/4" F × 1" M SALE $72.99
CEN 68584
3 Pc. Impact Pro™ Square Socket Adapters
• Impact driver rated socket adapters.
• 1/4" Hex power notch shank.
• High Impact Socket Adapters 1/4", 3/8", and 1/2".
SALE $8.60
SPI 15900
Extension Protectors Essential Kit
• Protects both ends of any length socket extension
• 1/2" square drive design
• Slim, low-profile design to reach limited access and tight area
MADE IN THE USA
SALE $47.00
SX 3580
80 Pc. 3/8" Dr. Master Set
• SAE Standard & Deep: (8 Pc.) 5/16"–3/4", (2) 3" Extension, 10" Extension, and 3/8" Dr. Universal Joint
• Metric Standard & Deep: (12 Pc.) 8 mm–19 mm, 5" Extension, and 15" Extension
• 3/8" Dr. Universal (SAE & Metric): (7 Pc.) 3/8"– 3/4", and (10 Pc.) 10 mm–19 mm
• 3/8" Dr. Internal & External Star: T20, T25, T27, T30, T40, T45, T47, T50, and T55 SALE $286.50
43 Pc. 1/2" Dr. Master Impact Socket Sets
• Set Includes: 1/2" U-Joint; 3", 5", 10", and 15" Extensions
• Includes 2 drive adapters 1/2" to 3/8" & 3/8" to 1/4" SALE $250.50
CTA 6542
25 Pc. Socket Set Bundle
• Includes dedicated socket sets in 8mm, 10mm and 12mm variations in both 1/4" and 3/8" drives
• 5 Pc. 8mm Socket Set
• 10 Pc. 10mm Socket
• Covering stubby,
$90.50
47 Pc. 1/2" Dr. Ratchet & Socket Set with PACKOUT™ Low-Profile Organizer
• 26 Pc. Standard: 10–24mm and 1/2–1-18"
• 18 Pc. Deep Well: 10–19mm and 1/2–15/16"
• 3" and 6" Extensions, and 90-Tooth Ratchet
• 90 tooth ratchet
• Lifetime Guarantee
MIL 48-22-9008
56 Pc. 3/8" Dr. Ratchet & Socket Set
• 27 Pc. Standard: 6–19mm and 1/4–1"
• 25 Pc. Deep Well: 6–19mm and 1/4–7/8"
• 3" and 6" Extensions, Universal Joint, and 90-Tooth Ratchet
• Most versatile sockets. Anti-roll, wrench-ready
• 90 Tooth design with 4º of arc swing
• Removable inner tray
• Lifetime Guarantee
SALE $155.00
• Lifetime Guarantee SALE $342.00 Flex Socket Sets
MIL 48-22-9004
50 Pc. 1/4" Dr. Ratchet & Socket Set
• 23 Pc. Standard: 5–15mm and 5/32–9/16"
• 23 Pc. Deep Well: 5–15mm and 5/32–9/16"
• 3" and 6" Extensions, Universal Joint, and 90-Tooth Ratchet
Universal NUT GRIP® Socket Sets, 11 Pc.
NUT GRIP® is Ko-ken's special design for
• Most versatile sockets. Anti-roll, wrench-ready
• 90 Tooth design with 4º of arc swing
• Removable inner tray
• Lifetime Guarantee
SALE $144.00
MIL 48-22-9010
46 Pc. 1/2" Dr. Ratchet & Socket Set
• 26 Pc. Standard: 10–24mm and 1/2–1-18"
• 18 Pc. Deep Well: 10–19mm and 1/2–15/16"
Special NUT GRIP® Socket Sets, 11 Pc.
NUT GRIP® is
KOK RS3350X/11
• 3" and 6" Extensions
• Most versatile sockets. Antiroll, wrench-ready
• 90 Tooth design with 4º of arc swing
• Removable inner tray
• Lifetime Guarantee
SALE $255.00
MIL 48-22-9044
25 Pc. 1/4" Dr. Metric & SAE Ratchet & Socket Set with FOUR FLAT™ SIDES
• Standard: 5–15mm & 5/32–9/16"
• 3" Extension and 90-Tooth Ratchet SALE $65.00
•
CHROME - SOCKET SETS
APT 4143
43 Pc. Hi-Vis Glowing Metric 1/4" & 3/8" Drive Shallow & Deep 6pt. Socket Set
• 4–19mm in 1/4" & 3/8" drive in both shallow and deep
• Multiple Hi-Vis markings that also glow under UV light
• Comprehensive set focuses on the size range of sockets most often lost in engine bays or are difficult to see the size on SALE $84.25
SK 91848
48 Pc. 1/4" Dr. SAE/ Metric Socket Set
• With Thumbwheel Ratchet, Adapters & Universal Joint
• 4.5" Pro ratchet–2" and 6" extensions
• Standard: 10 Pc. 3/16"–9/16", and 13 Pc. 4–15 mm
• Deep: 8 Pc. 1/4"–9/16", and 10 Pc. 6–15 mm
•
GP 81259CRD
APT 4110
8 Pc. 3/8" Drive Extra Deep Metric Socket Set
• 6-Point extra deep 4.75" Long 3/8" drive sockets
• 8-17mm no skipped sizes
• Popular for use on various diesel, Glow plugs, turbo systems, rear bumper covers, valve cover bolts, spark plugs, clutch bleeders, lug nuts and more SALE $82.25
SOCKETS
59 Pc. 3/8" Dr. 12 Pt. Standard & Deep SAE & Metric Duo-Socket Set
• 24 pc. SAE standard and deep: 5/16"–1"
• 32 pc. Metric standard and deep: 7–22 mm
• 72 tooth quick release ratchet
• 3" and 6" wobble extensions
• Molded storage case
GP 82622D
22 Pc. 1/2" 6-Pt. Drive Deep Fractional Set
• Set contains deep length 6 point sockets: 3/8" - 1-1/2"
• 24 Tooth Quick Release Ratchet
• 3", 6" wobble extension
• Molded storage case SALE $322.50
GP 89653CRD
Pc. 1/4" Dr. 6 Pt. Standard & Deep SAE & Metric Duo-Socket® Set
• 10 Pc. SAE standard and deep: 3/16"–9/16"
• 14 Pc. Metric standard and deep: 4–15 mm
• 72 Tooth quick release ratchet, 2", 4" and 6" Extensions and wobble spinner handle
• Molded storage case
SALE $268.00
59 Pc. 3/8" Dr. 6 Pt. Standard & Deep SAE & Metric Duo-Socket® Set
• 24 Pc. SAE standard and deep: 5/16"–1"
• 32 Pc. Metric standard and deep: 7–22 mm
• 72 Tooth quick release ratchet
RATCHETS & BREAKER BARS
90-Tooth Ratchets
• 90-tooth gear delivers a 4° swing arc
• Low-profile head and flush-mounted
• Enclosed head design
• Meets or exceeds ASME specifications
EZR MR482
3 Pc. Extendable Monster Ratchet Set
• 1/4", 3/8" and 1/2"
• Unique, extendable locking shaft
• Quick release drive head
• Precise 5 degree drive head contains 72 teeth for greater access SALE $98.50
EZR MR34
3/4" Dr. Extendable Monster Ratchet Extends from 24" to 40" SALE $164.50
EZR 4S04 Stubby Quarter Stick 1/4" Combination Dr.
• Only 4" long
• Great for tight spots under dashboards and bumpers
• Knurled low profile thumb wheel for extra precision.
• Push button quick release
• 180° Flexible heads at each end
• Lifetime warranty SALE $47.00
EZR MR482FL
3 Pc. Locking Flex Head Extendable Ratchet Set
• 1/4", 3/8", and 1/2"
• 180º Flexible angle
• 72 Tooth ratcheting head
120XP™ Ratchets
• 120XP Ratchet Head with double-stacked pawl with 3° swing arc
• Low-profile head and flush-mounted on/off switch
• Enclosed head design
• Meets or exceeds ASME specifications
• Unique, extendable locking shaft
• Quick release drive head SALE $109.25
EZR 4S12L
Headlock Quarter Stick
• 1/4" Bit drive and 1/4" square drive
• 12" Long
• Reversible switch
• 180° Locking flex heads
SALE $57.00
Z-Series 72 Tooth Reversible Ratchets
• Very low backlash, small head sizes, and high torque ranges
• 10% higher torque limit in comparison to the 36 tooth ratchet
• 72 tooth ratchets move 5°/click.
• Dual Paw mechanism for increase strength and movement
1/4" & 10mm Hex Reversible Bit Ratchet with Removable Sq. Dr. Adapters
• Reversible 72-tooth gear head, opposite end has reversible 60-tooth gear head
• Made of heat-treated Cr-V alloy steel
• Works with all 1/4" bits and 10mm fasteners
• Includes 1/4" & 3/8" square drive inserts
• Limited lifetime warranty SALE $83.75
1/4" & 5/16" Hex Bit Ratchet With 1/4" Square Drive
• Quick disk on the drive head
• Reversible fine tooth ratchet
• Polished chrome - heat treated alloy steel
• Works with all 1/4" and 5/16" hex bits and 1/4" square drive sockets
•
Dual Drive Ratchets
• For use with extensions and other tools
• Thumb wheel for finger tip control in tight areas
• Designed to grip up to 100% rounded fasteners •Includes (G-FORS) Foreign Object Removal System
• Extractor is designed to be hammered
• Unique Bi-Directional design for loosening and tightening of damaged fasteners SALE $240.00
Unique bi-directional design enables loosening & tightening of new and damaged hex fasteners
RPT designed to prevent rounding of new and compromised fasteners
GRP HCM8S
8 Pc. 1/2" Dr. Metric Set, 10–19 mm SALE $150.00
GRP HCS6S
6 Pc. 1/2" Dr. SAE Set, 3/8"–3/4" SALE $130.00
GRP HBM6LS
6 Pc. 3/8" Dr. Long Metric Set, 4–10 mm
SALE $120.00
GRP HBS6LS
6 Pc. 3/8" Dr. Long SAE Set, 5/32"–3/8" SALE $120.00
GRP GE11ASSHSRPT
11 Pc. 1/4" Dr. Short SAE Set, 1/16"–9/32 SALE $100.00
GRP GE7BSMHSRPT
7 Pc. 3/8" Dr. Short Metric Set, 4–10 mm SALE $100.00
GRP GE7BSSHSRPT
7 Pc. 3/8" Dr. Short SAE Set, 1/8"–3/8" SALE $100.00
GRP GE8ASMHSRPT
8 Pc. 1/4" Dr. Short Metric Set, 1.5–7 mm SALE $90.00
Unique bi-directional design enables loosening & tightening of new and damaged hex fasteners RPT designed to prevent rounding of new and compromised fasteners
GRP IHBM7S
7 Pc. 3/8" Dr. Short Metric Set, 4–11 mm SALE $110.00
GRP IHCS6S
6 Pc. 1/2" Dr. Short SAE Set, 3/8"–3/4" SALE $125.00
GRP IHCM7S
7 Pc. 1/2" Dr. Short Metric Set, 10–19 mm SALE $140.00
Replaces standard Star tools
Patented unique bi-directional design enables loosening & tightening of new and damaged Star fasteners
GRP GE14STSRPT
14 Pc.
VIM FRBS89
89 Pc. Bit Set with 1/4" Flex Ratchet
• Includes a wide array of bits: metric hex, SAE hex, Phillips, Phillips ACR, slotted, triple square (XZN), TORX, TORX Plus, TORX tamper resistant, TORX Plus tamper resistant, MORTORQ, square (Robertson) and clutch
• Bits are made of S2 steel
VIM VHC77
77 Pc. Half Cut Stubby Bit Set
Set includes: (10) TORX®, (10) Tamper Proof TORX®, (10) Torx Plus®, (10) Torx Plus 5 Point®, (10) hex inch, (10) hex metric, (4) phillips, (4) flat tip, (5) XZN 12 point, 5/16" hex to 1/4" sq. drive adapter, 1/4" hex extension, 5/16" hex extension, 1/4" × 5/16" bit ratchet wrench
SALE $164.50
VIM MMS450
50 Pc. 1/4" Sq. Dr. Mechanics Master Set
• Stubby Low Profile Half cut Drivers
• S2 Steel, 20mm Half cut Drivers
• Hex drivers 5/64" - 3/8" & 2-10MM
• P1 & P2, 1/4" & 3/8" Blade drivers
• TORX T8-50, torx plus IP15-IP50
• XZN drivers XZN4-XZN12 SALE $169.25
VIM BTXL400
7 Pc. Ball Torx Extra Long Set T10 thru T40 Torx, 6" long, 1/4" square drive SALE $50.00
VIM HCT1050A 10 Pc. Half Cut Stubby TORX Set
• T10 through T50
• 1/4" Square drive with 3/4" OAL
• 1/2" cut drivers
•
• 3-way bit and socket locking flex head ratchet SALE $171.25 VIM HXLM100 14 Pc. Metric Long Blade Hex Driver Set, 3–10mm
64 Pc. Mechanics Master Set
• 1/2 Cut = Better fit, higher torque
• S2 Steel, the strongest hardest drivers
• Satin chrome sockets
• Approved for hand and power tools
VIM TMS34PF
34 Pc. Master TORX® Set
• (13) TORX® drivers T8 thru T60
• (11) TORX® sockets E4 thru E20
• (10) Tamper proof TORX® T10 thru T55 SALE $139.25
VIM HMS26 26 Pc. Master Hex Dr. Set
• 1/4", 3/8" or 1/2" Square Dr.
• Metric hex drivers: 2–19 mm
• Fractional drivers: 3/32"–3/4" SALE $130.00
VIM UJET400
9 Pc. Universal Joint E-Torx
• Inverted Torx E4 Thru E16
• 1/4" Square Drives
• Set Includes:
• Limited lifetime warranty SALE $89.50
7 Pc. Ball Hex & 7 Pc. Hex
• Hex blades are S2 Steel, RC 58/62, black oxide plated
• Bit holders CRV steel, heat treated, chrome plated, set screw bit retention
• Extra set screws and hex key included SALE $101.25
IPA 8090S Professional Diesel Injector-Seat Cleaning Kit - Stainless Steel
Dead Blow Ball Peen Hammers
•
•
• Anti-Slip grip
•
• Lifetime Guarantee
• Removes rust, carbon and other debris without damage
• 3", 4" and 6" Brushes
• 13 Custom brushes, driver handle, 6" rigid and flexible extensions, 400+ assorted SWAB-EEZ® SALE $177.00
APT 9020
20 Pc. Wire Brush Set
• Includes 1 each in stainless steel, brass and nylon: 1/4", 3/8", 1/2", 5/8", 3/4" and 1"
• Includes an extension adapter with quick disconnect chuck for use with power tools
• 1/4" Hex shaped quick disconnect shank SALE $25.75
•
TTN 41211 10 Pc. Wire Tube Brush Set Flexible, sturdy and durable brushes are 12 inches overall and
LS 68740
27 Pc. Trim Removal Master Set
• Strong impact resistant design made of glass reinforced nylon.
• Designed to be flexible and are less likely to dent or damage surfaces.
SALE $46.50
LS 35240
Belt Molding Tool Small
TRIM & CLIP REMOVAL
CVT 113
5 Pc. Clip Lifter Set
• For removing plastic fasteners, plastic clips, upholstery or door panels
• Five different offsets with a range of three spreads (5mm, 7.5mm and 11mm)
• High-polish chrome finish and rubberized handles
SALE $43.50
• Makes removal of newer belt moldings easy. For clipless moldings, the tool is twisted or pulled back to release the molding from the door tab.
• For moldings with metal clips, hook the tool under each clip and pull up.
MADE IN THE USA
SALE $24.00
LS 35470
Double-Ended Trim Remover
The Hardened Tips Provide Strength & Access to Panels in Tight Areas.
MADE IN THE USA
CVT 115
27 Pc. Trim Tool & Pry Bar Set
• For removing various trim fasteners, molding, and wheel covers
• For removing adhesive material from delicate surfaces
• Made of plastic to prevent trim damage
• Can be used for internal and external trim fasteners
SALE $60.50
CVT 54
Adjustable Indexing Trim Clip Pliers
• Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
MLK 277 047
Combi Wedge & Universal Hook
• Combi Wedge: Perfect for a variety of panel clips and molding removal
• Universal Hook: Ideal for working on door molding, and a variety of other seals
SALE $22.50
MLK 277 008 Clip Lifter
• Perfect for the quick and easy removal of plastic fasteners, upholstery, door panels and plastic clips.
• Dimensions are 6.8" (L) x .59" (W)
SALE $22.50
MLK 277 015
5 Pc. Clip Lifter Set
• For plastic fasteners, plastic clips, upholstery or door panels
• Equipped with a sliding urethane button for use when extra leverage is necessary
MADE IN THE USA
SALE $12.75
LS 35400 Upholstery Clip Remover
MADE IN THE USA
SALE $10.50
SALE $15.00 PER W1760
• Adjustable head design allows access to difficult or otherwise unreachable areas when trying to use other similar pliers
• Steel construction with a double-dipped textured, grip SALE $55.00
CVT 68700
Multi-Function Push-Pin & Clip Pliers
• Multi-function head has cutouts for gripping various clips as well as sharp, beveled edges for cutting
• Offset head with low-profile jaws
• Spring-loaded jaws
SALE $22.50
12 Pc. Trim Removal Kit in Jar
• 12 multi-function trim tools provide 22 different end designs for removing interior and exterior trim, panels, and fasteners
• Made of durable nylon reinforced polypropylene
• Great tool for pulling plugs and push pin fasteners
• Reusable storage jar
SALE $16.45
DFX DF-625
Multi-Clip Pliers
• Curved head removes clips with ease
• Doubles as a cutting tool for removing tubing or plastic zip ties
SALE $38.70
STK 21470
5 Pc. Clip Remover Set
• Assorted trim clip tools
• 5 tools with openings from 5mm to 13mm
• Sturdy Metal Construction
• Ergonomic Rubber Handles SALE $119.00
STK 20000
The Original Pull Rod Set
• Super tough alloy steel is precisely heattreated for maximum strength
• Vinyl coated handle is comfortable to use
MADE IN THE USA
SALE $45.75
STK 21720
Sure Grip Trim Clip Plier
• Grips stem of clip - won’t break clips
• Works on trim pads, hood insulation, etc…
SALE $33.00
APT 4524
11 Pc. Fastener & Molding Removal Tool Set
• For use on internal and external vehicle molding and trim fasteners
• Plastic construction prevents scratching and damage.
SALE $24.00
APT 9589
4 Pc. Upholstery Tool Set
Complete set for removing door panel fasteners, upholstery and trim clips, dashboards and consoles and other plastic and metal clips of various sizes and shapes SALE $37.75
• Innovative leverage system combined with prime materials
• Straight line motion of mobile jaw
• Adjustable screw double-acts as mobile jaw SALE $206.00
PLIERS - SETS
Leverage Diagonal Cutters
• High leverage design provides fast and easy cuts
• Forged axel provides better cutting performance and longer tool life
Pitbull Dipped Handle Mixed Plier Set
MAY 27024T
EZR KWP2
2 Pc. KIWI Set
• Includes 6" short nose and 8" long nose
• More powerful grip with less effort SALE $25.00
High Leverage Angled Diagonal Cutters 12° Angled Head Offers Clearance for Gripping
KNI 9K008090US
2 Pc. Flush Cutting Diagonal Cutters Pliers
•
•
•
• Cutters
KNI 7221160
Diagonal Cutters for Plastics, 6-1/4"
• Compact diagonal cutters for plastic and soft materials such as lead
• Surface ground cutting edges (no bevel) SALE $85.00
7201160
6.5" Flush Cutting Diagonal Cutters Pliers
• Cutting face flush ground
• For nearly flush cutting of moulded plastic components from sprues
• Cuts soft materials such as lead in a flush cut
• With opening spring
• With elongated cutting edge
• Improved transmission ratio for 25 % more cutting performance SALE $47.00
CK 447 8" High Leverage Curved Diagonal Cutting Pliers
• Longer
•
CK PC-1 Pit Crew’s Choice
Includes 4.5", 6.5", 12", & 16.5" Straight
Jaw Tongue & Groove Pliers
MADE IN THE USA
SALE $114.35
CK TOOLROLL2
5 Pc. Tool Kit
• 9-1/2" Tongue and groove plier
• Crimping and cutting tool
• 7-3/4" Cutting plier
• 8" Long nose plier with side cutter
• 6-1/2" Tongue and groove plier SALE $160.45
8 Pc. Slotted & Phillips® Screwdriver Set
• Ergonomic acetate trilobe handle, extremely rugged impact and chemically resistant material
• Ribbed design on neck for fingertip control and a no-slip grip.
• Tempered high alloy steel
• Custom molded trays
• Custom heat treat and temper process MADE IN THE USA
SALE $91.50
MAY 66306
10 Pc. Capped End
Screwdriver Set
SALE $103.75
GWR 80066H 20 Pc. Phillips®/Slotted/Torx® Dual Material Screwdriver Set
• Ergonomic tri-lobe dual material handle
• Dual material handle
• Non-Slip black oxide tip
• Blades laser etched with part number and size
KNI 9K0080150US
5 Pc. Core Pliers Set
• 8" Forged Wire Stripper 20-10 AWG
• 10" High Leverage Diagonal Cutters
• 8" TwinGrip Pliers
• 10" Pliers Wrench
• 10" Cobra® Water Pump Pliers SALE $309.00
KNI 002008US2
3 Pc. Pliers Set "Kraft 2"
• Chain Nose Side Cutting Plier
• High Leverage Diagonal Cutter
• KNIPEX Cobra®, High-Tech Water Pump Pliers SALE $125.00
KNI 9K0080157US
3 Pc. Pro Pliers Set
• Includes 8" High Leverage Diagonal Cutter, 9 1/2" High Leverage Lineman's Pliers and 10" Cobra® Water Pump Pliers
• Will cut hardened steel
• Push-button adjustment
• Thin head fits into tight places SALE $139.00
• Full polish alloy steel screwdriver shaft
• Meets or exceeds ASME standards SALE $115.70
MIL 48-22-2710
10 Pc. Screwdriver Set
• Comfortable Tri-Lobe Handle
• Visible ID markings
• Phillips, Slotted, and Square
• Wrench Ready Hex Shanks SALE $37.99
VIM TX100XL
6 Pc. TORX XL
Screwdriver Set, 12"
• Includes sizes: T10, T15, T20, T25, T27 & T30
• Patented grip conforms to the shape of your hand
• S2 Steel Blades
• Sandblasted Tips SALE $66.00
VIM TX100
6 Pc. TORX Screwdriver Set
• Patented grip conforms to the shape of your hand
• S2 steel blades
• Sandblasted tips
• Includes sizes: T10, T15, T20, T25, T27, & T30
SALE $53.50
VES 9008EVA
SCREWDRIVERS
8 Pc. MEGADORA™ JAWSFIT™ Screwdriver Set
• Reduces CAM OUT on screws because of the cut on the blade made to fit tight
• New Phillips Jawsfit tip firmly grips screws
SALE $84.00
VES 980MIXEVA
8 Pc. MEGADORA
Assorted Screwdriver Set
• VESSEL's original Phillips tip profile for best fitting especially with Japanese (JCIS) screws
• Blade turns 12 counterclockwise and loosen stuck screws when striking with a hammer (No.980)
• Tang-Thru shank and a steel cap with cam rotation mechanism (No.980)
SALE $101.75
VES 9308EVA
8 Pc. MEGADORA
Tang-Thru Screwdriver Set
• MEGADORA JAWSFIT Tang-Thru Screwdriver 8pcs. Set (+1/+2/+2 Stubby/+3/-5.5/-6/-6 Stubby/-8)
• NEW Phillips JAWSFIT tip that firmly grips screws to reduce Cam-Out
• Useful knurled blade for quick and slipless turning
• Cr-V Alloy Steel Shank specially hardened
• Made in Japan
SALE $113.00
VES BUNDLE1
Screwdriver Bundle
• 8 Pc. MEGADORA Tang-Thru Screwdriver Set (9308EVA)
• MEGADORA IMPACTA Screwdriver 2 Pc Set (9802SC)
• BALL GRIP Ratchet Interchangeable Screwdriver with 10 Pc. Bit Set (2200MBH120K01)
• 9 Pc. Ball Point Wrench Stubby, Short Type, Set (8209BPSU)
SALE $153.50
SK 86006
9 Pc. Sure-Grip Screwdriver Set
• Set includes: (5) slotted and (4) Phillips
• Comfortable, square handle design allows you to generate maximum torque with minimum hand fatigue
SALE $153.15
SK 86007
9 Pc. CushionGrip
AOB 1082257
Wheeler Micro Precision Multi-Driver Tool Pen
• Aluminum handle construction
• Includes 17 interchangeable bits
• Stores 5 bits internally and comes with a 12 bit compact holder
SALE $31.00
AOB 564018
Precision Micro Screwdriver Set
• Chrome plated steel bits
• Extendable handle from 3-3/4" to 5-1/2"
• 5-3/4" flexible extension shaft
SALE $26.75
AOB 1081959
Wheeler 45 Pc. SAE/Metric
Hex & Torx Key Set
• 15 Pc. SAE Hex 0.028"–3/8"
• 15 Pc. Metric Hex 0.7–10mm
• 15 Pc. Torx T1–T35 SALE $39.75
Telescoping Magnetic Pick-Up
Tool with POWERCAP®
POWERCAP® slides over the magnetic end and increases direct pick-up force by 45% or more while preventing the side of the magnet from attaching to unwanted metal surfaces
Combination Screwdriver Set
• :P0 x 3", P2 x 2-1/4", P2 x 4", P1 x 4" Phillips
• 1/4" x 2-1/4", 1/4" x 4", 5/16" x 8", 5/16" x 12" Slotted
SALE $150.90
WER 05073675001
Kraftform Micro Set/12 Pc. SB 1
• Slotted and Phillips screws, TORX® socket screws, and Hexagon socket screws
• Kraftform Micro handle
• Black Point tip offers an exact fit and optimum corrosion protection
• Holding function for TORX® screws
SALE $54.75
MLK 909 600
6 Pc. ECO-LINE Screwdriver set
• 3 Phillip tips and 3 flat blade screwdrivers
• Neon green triangular handles for easy visibility and optimal grip
Extra Long Telescopic Magnifying Inspection Mirror
• Stainless steel handle telescopes from 1' to 4' 3"
• Magnifying mirror enlarges viewing service SALE $15.75
ULL HTS-2
Round 3-1/4" Telescoping Inspection Mirror
• Can be adjusted to nearly any angle
• Telescopes from 10-3/4" to 29-1/2" SALE $14.00
ULL 14X
Flex Magnet Retrieving Tool
• Super Strength • Powerful enough to pick up ferrous metal objects weighing 1-1/2 lbs
• Bendable aluminum shaft remains in position
• 21-9/16" Reach SALE $8.50
Flexible Magnet Pick-up Tools
• Long Aluminum Shaft can be bent at any angle to retrieve metal objects.
• Comfortable Textured Cushioned grip
V8T 3826
Mighty Worm Magnetic Pickup Tool
• Small magnetic head, barely 5mm
• Mounted on an extremely flexible 30" copper wire.
• Will pick up
SALE $8.00
• Sizes 6 mm thru 19 mm
• Long length, extended reach
• Limited lifetime warranty SALE $95.00
10 Pc. Slim Angled Ratcheting Wrench Set
• Exoskeleton design to reduce weight and increase comfortability and grip. Plus…they look awesome.
• 15-degree offset, 72 teeth
• Packed in an EVA shadow foam with all sizes clearly
•
WRENCHES
Sunex Wrench Sets
• Radius Corners to grip the flat sides of the fastener
• Chamfered box end
• Sizes stamped on both sides
• Canvas pouch
5 Pc. Double Deep Spline Flex Head Ratcheting Wrench Set – Metric 8–19mm SALE $229.50 VIM DFXL100 6 Pc. Deep Spline Ratcheting Flex Head XL Wrench Set, 8–17mm SALE $285.50 VIM FPRW10K 10 MM Flex Palm Ratcheting Wrench Key Chain SALE $16.25
Ratcheting Flare Nut Sets
EZR WR5ML
Metric XL Headlock Reversible Ratcheting Wrench Set
• Deep reach offset, locking flex heads
• 72 Tooth / reversible
• Universal spline
•
SALE $290.50
13 Pc. V-Groove Combination Wrench Sets
• Radius V-Groove design on open end provides an anti-slip and prevents rounding of the fastener
• Heat treated chrome vanadium
• Radius corner design on closed end improves the grip on fasteners and prevents round-off
WRENCHES
90-Tooth 12 Point Stubby Ratcheting Combination Wrench Set
• Thin head and beam
• Off-corner loading design on box end
• Color-coded markings
• Manufactured from alloy steel
• Bright, full polish chrome finish
90-Tooth 12 Point Stubby Flex Ratcheting Combination Wrench Set
• Thin head and beam
• Off-corner loading design on box end
• Color-coded markings
• Manufactured from alloy steel
• Bright, full polish chrome finish PART # RANGE SALE
90T Double Flex GearBox Sets
• 90 tooth ratcheting mechanism
• Head flexes through 180° for adjustable access angle
• Off-corner loading
• Longer beam for improved reach and better leverage
• Large color markings for easy size identification
• Professional, full polish chrome
90-Tooth 12 Point Reversible Ratcheting Wrench Set
• Professional 90-tooth gear requires only 4° of swing arc to turn a fastener
• Low-profile reverse lever quickly switches from forward to reverse without removing the wrench
• 15° offset box end increases clearance
• Off-corner loading on both open and closed ends significantly reduces the risk of fastener rounding
• High visibility ink in size stamping for faster identification
• Meets or exceeds ASME and ANSI specifications
90T Combination Ratcheting Wrench Sets
• 90-tooth deliver a 4º swing arc for improved access
MaxiSYS MSUltra EV Advanced EV Diagnostics with MaxiFlash VCMI
• Advanced diagnostics for U.S., European and Asian electric, gas and diesel, and hybrid vehicles
• Rapid analysis of EV high-voltage system including ability to read and erase codes and view live data
• Comprehensive diagrams of high-voltage system block, components and sockets; Stepby-step system disassembly instructions
• State of Charge and State of Health analysis for true battery condition
• Battery pack analysis can be performed via OBD or analyze the pack directly with included specialty cables and jumpers; the Ultra EV screen displays detailed graphics and in-depth connection guidance to provide safe and secure testing.
• Interactive Data Logging sessions enable direct contact with Autel Support for first-hand troubleshooting of diagnostic bugs and error
• Cloud-based Data Manager
SALE $6,430.00
AUT MS908CVII
MaxiSYS MS908CVII: Commercial Vehicle Diagnostics & Service Tablet
• 9.7" wireless touchscreen Heavy Duty Vehicle Diagnostics and Service Tablet
• Performs advanced diagnostics on Class1Class9 Heavy duty vehicles
• Read and Erase codes, view live data, perform bi-directional active tests
• Expert Mode for direct access to OE-specific system components, including engine, transmission, and braking systems
• Perform injector cutout tests, injector coding
• Equipped with MaxiFlash wireless bluetooth VCI/J2534
• Supports newest communication protocols on light duty vehicles with purchase of MaxiVCI200
• Includes one year of free software updates and limited warranty coverage
SALE $3,295.00
MaxiSYS PRO OBDII
Bi-Directional Diagnostic Scanner
• Faster Hardware / Expanded Software / New Cloud Services
• ADAS & Battery Analyzation Capable
• New Scan VIN
• New Camera-Based License Plate Scan Recognition
• All System AutoSCAN with ADAS Identification
• 8" Touchscreen / Includes VCI 200
• Android 7.0 Operating System PART
AUT MS906PRO MS906Pro
AUT MS906PROTS MS906PRO-TS Includes Complete TPMS Functionality and 1-Sensor Programming
AUT MS909
MaxiSYS MS909 Diagnostic Tablet with MaxiFLASH VCI
• Authorized FCA SGM Access with AutoAuth Account SALE $3,955.00
Special Purchase
LAU 301050365
Millennium 90 Pro
Multipurpose code reader provides 10 OBDII/EOBD diagnostic modes and the following special functions: oil reset, brake bleeding, EPB, BMS, DPF, SAS reset. In addition, it gives live data stream reading Engine, Auto Transmission, ABS and SRS diagnosis to facilitate all-around car detection.
SALE $178.50
AUT MD600CV
MaxiDiag MD600CV
• Wireless Android tablet for Light, Medium and Heavy-duty vehicle diagnostics and service, compatible with Class 3 to Class 9 vehicles
• Read and erase codes, View Freeze Frame and Live Data
• Performs common maintenance and service tasks specific to heavy duty vehicles, including DPF Regen, Idle Shutoff, Oil Light Reset, Brake Bleed, Throttle Body Relearn, and Injector Coding/Reset
• Includes Wireless VCI and supports J1708, J1939, J1587, J1850, CDL, PLC, and VPW protocols
SALE $1,236.00
AUT MX900
MaxiCheck MX900 Advanced Service + All System Diagnostics
• 8" corded Wi-Fi-enabled touchscreen tablet
• Compatible with U.S., Asian, and European vehicles, 1996 and newer
• Read and erase codes, view and graph Live Data, view Freeze Frame data
• Perform bi-directional Active Tests and Special Functions
• Update firmware and coverage software wirelessly SALE $599.00
Total Care (TCP) 1-Year Warranty & Software Update Extension
• Extends subscription for 12 months
• Updates include new Tablet Diagnostic Functions and features
• Upgraded Octa-Core processor and 128GB storage and Android 10.0 Operating System with 9.7” Touchscreen and the whole-new MaxiFlash VCI to deliver smooth operation
• Intelligent Diagnostics with Module Topology on Select Vehicles and Enhanced AutoSCAN / VINScan and DTC Analysis / Repair Guided Assist
• Support heavy Duty Battery Test & Health Report
SALE $5,450.00
OT 3893-LTW Encore 1 Year
Subscription & Lifetime Hardware Warranty SALE $828.00
LAU 341051503
MILLENNIUM OBD
• Look up the definition of diagnostic trouble codes (DTCs)
• Graph live data of multiple sensors displayed
• Features freeze frame data
• Features I/M Readiness function with one click key
• Read Codes, Erase Codes, Live Data, On-board Monitor Test, O2 Sensor Test, I/M Readiness, View Freeze Frame, View Vehicle Information, EVAP System Test
• Automotive diagnostic kit with common leads for testing and trouble shooting
• Diagnosis of faults in most: Sensors, valves, solenoids, actuators, injectors starter circuits, ignition coils on European and Asian cars, trucks, agricultural vehicles, boats and motorcycles.
• Differs from others as it includes ‘Y-style’ leads for quick connection of meters and scopes, so no need to use time-consuming straight through leads to make test leads SALE $231.86
CTA 7662 92 Pc. Master Line Kit
• Comprehensive electrical testing kit
• Effortlessly analyze voltage, continuity, impedance and current
• Stainless steel probe tips
• 1000V & 30 Amps plus CE certificated
• Best heat insulation on market
SALE $329.00
SMOKE MACHINES
MC 43060-EV
EVAP Diagnostic Smoke Machine with internal compressor Accessories included: full set of block off caps, exhaust cone, evap schrader valve remover/ installer, evap service port adapter hose (green cap), high intensity smoke illuminating battery powered flashlight and 8 oz smoke producing fluid
SALE $875.00
MC 43065
Dual EVAP/High Pressure Diagnostic Smoke Machine
• Compact, heavy duty design for years of reliable service
• Multiple options for smoke injection include built-in internal compressor, shop air and inert gases
• Built-in safety pressure relief valve
• Built-in pressure regulated at 0.5 PSI for safe EVAP testing
• Large easy to read pressure decay gauge 0-30 psi – HP/HD
• 10' 12V power cables with durable clamps
• Heavy duty 10’ smoke injection hose SALE $1,799.00
MC 43066
Digital Dual Smoke Machine
• High-precision gas pressure sensor
• 3.5" color LCD screen
• Guided operating software
• 3 built-in high-power air pumps
• Device leakage self-inspection
• Pressure decay test
• Non-toxic and non-corrosive smoke
• 10' 12V power cables with durable clamps and heavy duty 10' smoke injection hose
• Built-in pressure regulated
SALE $1,459.00
RDL 95-0003/C
Smoke Pro® Total Tech
• Finds Leaks Fast in Any Closed System
• Ultra Fine Flowmeter is 4x More Sensitive, Critical for PZEV and SULEV Emission Diagnostics
• Includes: (2) sets of test leads, rpm pick-up, temperature probe, protective holster, built in stand
SALE $128.25
• CAT III 1000V / CAT IV 600V according to EN 61010
SALE $109.00
PPR KPS-MT720 Digital Multimeter
• DC/AC voltage, DC/AC current, resistance, capacitance, and frequency measurement
• TRMS measurements
• MAX / MIN values, relative measurements
• Data hold
• Auto range, auto-off, display backlight
• CAT III 1000V, CAT IV 600V SALE $120.00
ESI 480A
Auto Ranging Multimeter
• 43 Test ranges
• Auto power off -- Dual fuse protection SALE $60.50
LNG 13803 Automotive Digital Multimeter Kit
• 3-Year warranty
• Auto-ranging helps simplify operation
• Bar graphing ability identifies rapidly changing signals
• Built-in tilt stand SALE $129.00
LNG 13809 CAT III DMM
• 19 Functions/7 ranges
• Manual ranging
• 600V AC/DC
• 10A AC/DC
• 20MΩ Resistance
• Data Hold
• CAT III 600V ETL Approval SALE $48.00
PPR PPDMM Digital Multimeter
• CAT-IV 600V hybrid safe rating
• Measures frequency
• Included≈ K-Type
$164.05
MIL 2217-20
True RMS Multimeter
• Wide voltage range to 600 volts AC/DC
• Auto range to millivolts and milliamp ranges
• Lo-Z measurement to eliminate ghost voltage
• Frequency measurements 10–50kHz
• Contact temperature measurement -40–752°F
• High contrast, white on black display with backlight
SALE $199.00
ESI 687
Low Current Probe
• Measures DC / AC 0.001A - 80A
• Can measure down to 1 milliamp
• Large jaw opening
• Expanded multimeter functions
• With zippered case and 9V battery
• Data hold - auto power off - backlit LCD display
SALE $212.25
PPR KPS-DCM4000T TRMS Clamp Meter 1000A AC/DC with Temperature
• AC/DC Voltage, AC/DC current
• CAT IV 600V according to EN 61010
• 6000 counts SALE $127.00
PPR KPS-PA420MINI Mini Digital Clamp Meter
• AC/DC voltage, AC current and resistance measurement
• Diode check and continuity buzzer
• Data hold
• CAT III 600V
SALE $35.75
PPR KPS-PA430MINI
Mini Digital Clamp Meter
• AC/DC voltage, AC/DC current
• Display: 4000 counts
• Continuity buzzer and diode test
• Data hold
• MAX/MIN values. Relative measurements
• Resistance, capacitance and frequency measurement
• Auto range, auto-off, work light and low battery display
• CAT III 600V
SALE $66.70
PPR KPS-PA720
TRMS Digital Clamp Meter
• Jaw Opening Ф40mm/1.6"
• Auto & Manual Ranging
• Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Inrush Current Measurement SALE $75.00
PPR KPS-LX30LED
Digital Light Meter
• High accuracy digital light meter
PPR PPVT750LCDCBINT
VT750LCD Volt Tester
• 2,000 count digital display
• AC / DC 750V capability
• Dual display for ACV measuring with Frequency
• 2K Ohms Resistance range
• 1K Hz Frequency Counter
• Integrated single pole test for phase detection
• IP65 for outdoor use
SALE $122.40
ESI 683
High Accuracy Low Current Clamp Meter
• Reads low current accurately with 1mA low amps resolution
• Precision zeroing circuit - zero drift on this probe is exceptional and minimal
• Clamp over ground cables - large clamp size of 16mm x 18mm
• Test range: 1mA to 60 Amp
SALE $249.00
• Switch between different lighting sources (LED included)
• Fc/Lux/CD unit selection SALE $71.40
PPR KPS-SN10 Digital Sound Level Meter
• Class II digital sound level meter according to IEC 651
• Display: 2,000 counts
• Sample rate: 2 times per second
• A/C weighting selection
• MAX values
• FAST/SLOW selection
• Data hold
SALE $90.00
STC CM100
1 Milliamp Clamp Meter
• Clamp opens up to 1/2"
• 50 Hours in use battery life
• Low amperage measurements from 1 m/a to 100 amp
• AC/DC Voltage and current measurement up to 600V SALE $228.50
STC CM600
AC/DC Current Clamp Meter
• Low amperage measurements from 1 m/a to 600 amp
• Clamp opens up to 1"
• AC/DC voltage and current measurement up to 600V
• Auto power off
• Test leads and batteries included SALE $174.50
LS 28800 Digital Test Light with Load Tester
• Works as a regular test light and when you push the button on the tool it applies an 800mA load at 12V DC to easily check for voltage drop on circuits
• The display will indicate the voltage drop when the button is pushed
• 48" cord with heavy-duty alligator clamp
• Not computer safe with load applied
• Not for use on airbags
• For use on 6, 12, 24, and 48 Volt systems.
• Quickly and easily checks voltage, power, ground and circuitry
• Red LED indicates power (+) and green LED indicates ground(-)
• Measures from 4.0 to 60.0 volts DC
• Wire stretches up to 11 feet
• Computer safe
• Heavy duty ground clip with insulator
• Resolution: 0.1 Vol
•
to 12'
• Used for testing power and ground voltage on DC circuits. SALE $59.00
TTN 15020 Bulb Pliers
•
•
7767
LCD Wide Range Positive and Ground Circuit Tester - 3.5 - 60V
• Digital display to read the accurate voltage value, which can be measured from 4-60V
• LCD indication for power in this tool is red and green is for ground.
Power Probe IV
• Large Multi-Line Color LCD Screen
• Water and dust resistant with loud indicator tones
• Measure DC, AC, and Frequency (HZ)
• Test resistance on live and unloaded circuits
• Fuel Injector Tester Mode
• Test millivolts for parasitic draws, charging system connectors, starting systems, sensors, modules and much more
• Test for good source ground and power feeds
PPR PP401AS RED
$302.60
PPR PP405AS GREEN $302.60
CIRCUIT TESTING
Power Probe III
• Audible tones features
• Voltmeter
• 12 -24 VDC Range
• 20 Ft. Power Cable
• Continuity tester
• Short circuit indicator
• Relay and component tester
• Positive/Negative voltage indicator
• Ability to power up components
CASE: Power Probe 3 with standard 20' cable, 20' power cable extension, power cable, 3" probe tip, battery clip set, and cigarette lighter adapter
PPR 319CARB CARBON FIBER
PPR 319FTC-FIRE FIRE
PPR 319FTC-RED RED
PPR PPKIT04
Power Probe 4
Master Combo Kit
Power Probe 4 Master Kit with intelligent circuit tracer for shorts and opens and Gold Series Lead Set (PPLS01). This Diagnostic Kit is well balanced to work on all 12–24VDC providing diagnostics between, the circuits, components and computer drivers..
SALE $499.00
PPR PPRKIT03S
Power Probe 3
Master Combo Kit
Combines the Power Probe 3, PPECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit testing capabilities.
SALE $418.20
PPR PPROKIT01
Testing
Kit Includes Power Probe III plus PPDMM Digital Multimeter Kit SALE $331.50
• DC Voltmeter Indicators provide active feedback
• LED Lights
• Bad Ground Indicator
• Short Circuit Indicator
• Relay and Component Tester
• Audible Monitoring of Electrical Signals MADE IN THE USA SALE $267.75
PPR PPTM01AS
The Maestro
• A multi-use Circuit-Tester with built-in diagnostic power
• Large LCD color display
• Wirelessly pairs with the Power Probe Tek App, allows for a wireless remote display as well as data streaming or recording.
• All of this information can be emailed, exported or simply saved for future reference
SALE $356.20
$189.60
$189.60
$189.60
PPR PP319FTC-BLU BLUE $189.60
PPR PP319FTC-BLK BLACK $189.60
PPR PP319FTC-GRN GREEN $189.60
STAND ALONE: Power Probe 3 with standard 20' cable, power cable, 3" probe tip, battery clip set
PPR PP3CSBLU BLUE $145.40 PPR PP3CSFIRE FIRE
PPR PPTK0003
Piercing Probe Kit
• Yellow 4mm Banana Jack 8-18 gauge wires
• Green 4mm Banana Jack 20-28 gauge wires
SALE $28.10
PPR PPTK0005
Test Probe Adapter Kit
One Back Probe and One Blade Probe SALE $15.85
PPR PPTK0024
Probe Tip 3" Two Black Power Probe Standard 3" Probe Tips SALE $20.15
PPR PPAMPTIPCBINT
DC Current Reader PPAMP
An adapter that is plugged into Power Probe products with 4mm banana plugs
SALE $63.00
PPR PPWMTIPCBINT
PWM Signal Generator PPPWM
An adapter that is plugged into Power Probe products with 4mm banana plugs
SALE $62.90
PPR KPS-DT10CBINT
Voltage Tester
• Non-contact voltage detection
• Voltage range: 90V-1000V AC
• Frequency: 50/60Hz
• Acoustic and LED indicate
• CAT II 1000V according to EN61010
SALE $10.25
Power Probe 3EZ
• Test voltage and power up components
• EZ Learning software, teaches the user how to operate the tool
• EZ Diagnostics software, teaches the user how to perform common diagnostic applications on a vehicle.
• Menu driven navigation
CASE: Power Probe 3EZ with standard 20' cable, 20' power cable extension, power cable, 3" probe tip, battery clip set, and cigarette lighter adapter
PPR PP3EZORGAS ORANGE $223.60
PPR PP3EZREDAS
STAND ALONE: Power Probe 3EZ with standard 20' cable, power cable, 3" probe tip, battery clip set
PPR PP3EZCARBCS CARBON FIBER $178.50
PP3EZGRNCS GREEN
PP3EZREDCS RED
PPR PPECB OBD-II Breakout Box
• Test DLC (OBD port) for any abnormalities, such as shorting and reverse polarity at the pins before connecting other diagnostic equipment to DLC
• Provides a live display of communicating signals on assigned pins for quick pointing of faults
• Quickly access all 16 pin connections
• 2 pin adapter included SALE $247.40
Intelligent Circuit Tracer for Shorts and Opens
• Automatic and manual sensitivity locking
• Arrow indicates direction to short
• Signal Distance indicator bar
• Case Includes: Battery Clip Set, Alligator Clip, Universal 4mm Adapter, Bulb Adapter Kit, Small Piercing Probe, Blade Probe Adapter, Back Probe Adapter
• Stand Alone Includes: Alligator Clip, and Universal 4mm Adapter
PPR PPT5VA 5V Adapter
Connects to any Power Probe circuit tester and limit the voltage to 5 volts perfect for testing sensor and computer circuits. SALE $34.15
PPR KPS-CC810US
GCFI Outlet Tester
• LED indication
• GFCI test
• AC Voltage = 125V
• Easy and fast way to check the integrity of an outlet
• CAT II 125V SALE $11.90
ESI 190
Relay Buddy
• Quick off-the-car relay tester
• Checks relay coil & switch contacts
• Fails bad relays
• Automatic test with Good/Bad indication
SALE $78.50
ESI 316
Relay Fuse Buddy
• Relay Fuse Buddy acts as a convenient relay bypass switch with live amperage readings
• In circuit bypass switch controls power downstream of relay
• Displays live circuit current – 20 Amps continuous – 30 Amps momentary
• Turn on and off DC motors, fuel injectors, fuel pumps and see the amp draw
SALE $119.00
ESI 193
Diagnostic Relay Buddy®
12/24 Pro Test Kit
• Tests both 12V and 24V relays
• 3 Diagnostic trouble codes help define the cause of the bad relay
• Kit includes 5 Relay Adapters! SALE $197.75
ESI 192
Diagnostic Relay
Buddy® 12/24
• Tests both 12V and 24V relays
• 3 diagnostic trouble codes help define the cause of the bad relay
• Includes zippered carrying case
SALE $89.50
ESI 194
Super Relay Buddy®
• Full 7+ amp load flags intermittently failing relays
• Three test results - Green/Pass, Red/ Fail & Yellow/Pass with caution
• Greater coverage, tester alone checks
7 different 12 Volt relays
• Fully automated, 10 cycle test
SALE $126.75
ESI 195
Super Relay Buddy® Pro Kit
• Full 7+ amp load flags intermittently failing relays
• Three test results - Green/Pass, Red/ Fail & Yellow/Pass with caution
• Wide test coverage, checks 10 different 12 Volt relays
• Fully automated, 10 cycle test
SALE $211.00
•
•
•
IPA 9107B
Electric Brake Force Meter With Dynamic Load Simulation & Circuit Testing (3rd Gen)
• Includes 2023 updates
• Tests vehicle trailer light and electric brake systems
• Simulates trailer brake and light loads
• Works with modern integrated trailer brake controllers and aftermarket brake controllers
• 25' cable
• Use to test the vehicle’s adaptive (speed/load sensitive) brake-controller output is functioning properly
• Comes in soft nylon case MADE IN THE USA SALE $257.00
•
•
SALE $158.00
IPA 7893
7 Flat Pin Trailer Plug Tester For all SUVs and light trucks SALE $33.90
WAE 76500
Ignition Coil Tester
• Quick, easy testing. - Non-intrusive, quick check tool instantly verifies active or inactive coil operation.
• Designed for versatile testing. - Tool can be used to test coil on plug, coil near plug, and coil pack systems
• 2xAAA (LR03) battery
• Sensitivity: 300 Gauss (30m T)
• Operating temperature: 14 to 122°F
• Operating humidity: <80%
• Overvoltage: CAT III 1000V AC
SALE $27.20
IPA 8048
17 Pc. HD Fleet
Technician's Electrical
Terminal Maintenance Set
Applications include Deutsch, Cannon, 7-Way Round Trailer Harness, Weather Pack, Bullet Connectors, Common ABS Sensor and Power Connectors, Trailer Light Plugs and More
SALE $155.90
IPA 8042
Diamond Micro Round Files
• Diameter sizes range from .030" to .120" and 5" long
• Strong but flexible
• Each file is marked or color coded for size
SALE $59.00
IPA 8040
3 Pc. Diamond Grip
Terminal Cleaners
• For flat pin or spade style terminals
• Works on male and female connectors
• Remove corrosion and extend harness life
SALE $48.00
IPA 8016
Fuse Saver® Master Kit
Includes: 5, 10, 15, 20 and 30 amp breaker handles, 10' cord with the dual connector, BuzzAlert™ module and the complete Fuse Box Adapter Set in one custom case.
SALE $287.90
IPA 9038
PRL PPESSKIT
Sensor Stimulator
• Mainly used for simulation of the signals generated by different types of sensors in the vehicle
• The ECM / ECU and wiring harness efficiency can be estimated
• 12V/24V systems and can simulate vehicle sensor output signals, i.e Crankshaft Position (CKP) sensor, Camshaft Position (CMP) sensor, ABS sensor, Wheel Speed (WSS) sensor and Coolant Temperature sensor
SALE $228.00
6 Pc. Relay Bypass Switch Master Kit
• Actuates fuel pump when the engine is not running
• Controls fuel pump independent of "key on" systems
• Plugs in place of relay
• Operating range: 20A (12V)
• Covers most domestic, Japanese, Korean and German applications SALE $90.00
IPA 7865L
7 Pin Circuit Chaser
• Will adapt to 100% of the tractor trailers
• Improved the LED display
• Includes extra pin and jumper connectors SALE $49.90
PRL PPESVP
Sensor Voltage Probe
• Simulation of 0.5V ~ 7.0V (3A output)
• Simulation of 0.2V ~ 7.0V (150mA or 0.15A output)
• Volt measurement up to 70V DC with polarity check
• Resistance measurement up to 5K
• 12V/24V systems with ECM / ECU either independently, or very often it is used together with a diagnostic scanner to distinguish faults whether that lies in the sensor itself or related to the connection
SALE $150.00
PORTABLE STARTING SYSTEMS
Boost UltraSafe Lithium Jump Starter Safely Jump Start a Dead Battery In Seconds.™
• Compact, yet powerful lithium jump starter
• Ultra-safe and mistake-proof design with sparkproof technology and reverse polarity protection, which allows it to safely connect to any battery
• LED flashlight with 7 light modes, including emergency strobe and SOS.
• 20X Jump starts per charge
• Gas engines up to 4L
• 100 Lumen LED flashlight
• Recharges USB Devices
• Includes HD Precision Boost Battery Clamps to easily connect to any 12V lead-acid battery SALE $104.00
NOC GB50 BOOST®XL™ 12V 1500A
• 30X Jump starts per charge
• Gas engines up to 7L, and diesel up to 4.5L
• 200 Lumen LED flashlight
• Recharges USB Devices
• Hot and Cold LED indicators of the internal battery operating temperatures to protect your batteries and devices.
• Includes HD Precision Boost Battery Clamps designed to easily connect to any 12V leadacid battery from powersports to trucks
SALE $193.00
Boost Max UltraSafe Lithium Jump Starter Commercial-Grade. Massive Power.
• Commercial grade starts up tp class 8, equipment, motorhomes, buses, etc.
• integrated digital battery voltmeter for enhanced diagnostics
• Compact and lightweight with portable carry case
• LED flashlight with 7 light modes, including emergency strobe and SOS.
NOC GB500
GB250+ 12V/24V 6250A
• Gasoline and diesel engines up to 45L
• 2200-lumen LED flashlight
• 24.0 Built in digital voltage display SALE $2,379.00
NOC GB250
GB250+ 12V 5250A
• Gasoline and diesel engines up to 16L
• 600-lumen LED flashlight
• 12.0 Built in digital voltage display SALE $1,422.00
NOC GB251
GB250+ 24V 3000A
• Gasoline and diesel engines up to 32L
• 600-lumen LED flashlight
• 24.0 Built in digital voltage display SALE $1,422.00
BOOST X Ultrasafe Lithium Jump Starters
An all-new design with extreme jump starting power for fast and powerful engines starts. Introducing a new kind of jump starting experience, featuring our latest PX Lithium Technology that delivers incredible power, ultra-fast charging, and unmatched versatility. This isn't an upgrade. It's a whole new series
• Fast Charge: Go from 0% to jump starting in just 5-minutes of charge.
• Auto Power Conservation: Start vehicle within 60 seconds.
• ULTRASAFE 2.0: Spark-proof technology and reverse polarity protection, with enhanced thermal efficiency and power management to provide better performance and longer battery life.
• 60W USB-C in & out. 10W USB-A out
NOC GBX45 BOOST X 12V 1250A
• Up to 6.5L Gas / 4.0L Diesel
• 100 lumen LED flashlight SALE $161.00
NOC GBX55 BOOST X 12V 1750A
• Up to 7.5L Gas / 5.0L Diesel
• 200 lumen LED flashlight
$225.00
NOC GBX75 BOOST X 12V 2500A
• Up to 8.5L Gas / 6.0L Diesel
• 400 lumen LED flashlight SALE $319.00
• 500 lumen LED flashlight SALE $469.00 NOC GB20
• 40X Jump starts per charge
• Gas engines up to 8L, and diesel up to 6L
• 400 Lumen LED flashlight
• Recharges USB and 12V devices SALE $249.00
NOC GB150 BOOST®PRO™ 12V 3000A
• 80X Jump starts per charge
• Gas engines up to 9L, and diesel up to 7L
• 500 Lumen LED flashlight
• Recharges USB and 12V devices
• Bulit-in voltmeter
SALE $369.00
•
NOC XGC4 56W XGC Power Adapter
• Charges five times faster than using a traditional 2-amp USB wall or car chargers
• Compatible with GB70, GB150, GB250+, GB251+ & GB500+. SALE $77.00
NOC GBX155 BOOST X 12V 4250A
• Up to 10.0L Gas / 8.0L Diesel
NOC U65 65W USB-C Charger
• Recharge NOCO Boost X UltraSafe Lithium Jump Starters.
• Compatible with NOCO Boost X UltraSafe Lithium Jump Starter models GBX45, GBX55, GBX75, and GBX155.
SALE $89.95 Rugged EVA Protective Case
• Charges up to five times faster than using a traditional 2-amp USB wall or car charger.
NOC NUSB211NA 10W USB Wall Charger SALE $12.95
PORTABLE
•
•
• For use on a majority of gas and diesel-powered engines
• Auto-shutoff feature
• Bright, multi-function LED flashlight
• Jump start cables, case, USB to micro USB cable, and AC adapter
SALE $193.00
CVT 550 BOOST
• For use on a majority of V8 gas powered engines and many small diesel engines
• Designed for lead-acid, deep-cycle, flooded, gel, AGM, maintenance-free & lithium-ion batteries
• Precision charging - integrated thermal sensor
• Charges batteries as low as 1 volt, or manually begin charging down to zero volts
• Automatically detects battery sulfation and acid stratification to restore lost battery performance
SALE $259.00
Genius Battery Charger + Maintainers
• Charges and maintain cars, boats, motorcycles, ATVs, lawn mowers, trucks, RVs, tractors, equipment and more.
• Safely monitor battery activity 24/7 with zero overcharge
DSR INC-100 100A Flash Reprogrammer/ Power Supply with Battery Support
• Fully automatic microprocessor controlled power supply
• For regular automotive, lead-acid, calcium, AGM, start-stop and Gel Cell battery types
• Maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work
• Digital volts and amps display
SALE $636.00 DSR DSR145 6V/12V 125A ProSeries Battery
•
•
•
W1669
2 Gauge 20' Jumper Cables
• Tangle-free rubber coated cables
• All weather use
• Parrot clamp SALE $57.70
Copper plated clamps
Instructions on back label
• Handles all 6/12V
SEC SP1296 2A 12V/6V Charger/Maintainer
• Fully Automatic, Microprocessor Controlled
• Schu eco energy: maximum energy efficiency
• Auto voltage detection
• Reverse-hookup protection
• Desulfation and float mode
• For all battery types
• Includes: quick connect harness, 50A clamps, 24" fused ring leads with weather cap SALE $62.85
AUT BT506
MaxiBAS BT506
Battery Tester
• BT506 is a Battery and Electrical System Analysis tool and App
• Includes Connected Cable with Clamps
• Support In-vehicle and Out-of-vehicle Testing of Passenger Vehicle Batteries
• Test 6- and 12-volt batteries: 100 - 2000 CCA
• Test 12- and 24- cranking/charging systems
• Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
• Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
• Download Free App from Google Play and the App Store
SALE $219.00
AUT BT609
MAXIBAS Battery System Analyzer
• Like MX808 but better, with large 7" screen, bluetooth VCI and battery system analyzer
• Read/clear codes on all available vehicle systems and perform common maintenance services
• Print and share customized reports via wi-fi
SALE $795.00
AUT BT608 MAXIBAS Battery System Analyzer
• The ultimate battery & electrical system tester with printer!
• Pre-loaded with 53 vehicle makes and free s/w updates for the life of the tool.
• Intelligently addresses all battery registration and reset requirements.
• 5.5" touchscreen, Android 9.0 OS
• Print to pc, e-mail results
• Add BTAK for parasitic draw, starter draw and alternator output in amps (sold separately).
SALE $595.00
LAU 307020135
BST-860S Plug-To-Play Battery Tester
• International measurement standards supported include CCA, BCI, CA, MCA, JlS, DIN, IEC, EN, SAE, GB.
• 6 battery & electrical test functions supported include ripple detection, battery test, electric current test, starter test, charging system test and voltage test
• Generate the health report within 3 seconds
• Working Range: 40-3000CCA
• Voltage Range: 7-30VDC
SALE $233.00
LAU 301180832
BST-360 Bluetooth Battery Tester
• Works with smart phones or X431 service tablets
• International measurement standards: CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, BCI
• Ripple detection, Battery test, starter test, charging system test, electric current and voltage test
• Battery Types: 6V and 12V (Lead-acid battery, gel battery and AGM battery)
SALE $97.00
TPN BT200
12V Battery & 12V/24V System Tester
• Support 12v and 24v Batteries
• Battery test includes State of Health, State of Charge, Voltage, Current, Rating, and analysis
• Ideal for Cars Motorcycles, Light Trucks, RVs, ATVs, Boats, and more
• Test multiple battery types (VRLA, GEL, AGM, EFB, and Regular Flooded)
SALE $74.00
TPN BT300P
Battery, Charging & Cranking System Tester with Printer
• Accredited for 10 battery standards: CCA (100 to2000),CA ,BCI,MCA,DIN,IEC,EN,SAE,JIS, GB
• Compatible with 4 Battery types
• 4" color display
• Built in printer can print test results within seconds
• High quality, light weight, wear resistant storage bag
• 3 Free rolls of standard printing paper
SALE $125.00
ESI 706
Digital Battery Tester With Automatic Test
• The load is turned off, by internal relay, automatically after 10 seconds
• Unit indicates “CHG” if the pre-test state of charge is not sufficient for proper battery testing.
• Internal 100 Amp loading capacity MADE IN THE USA SALE $69.50
ESI 700
Analog Battery Tester, 6-12V
• Internal 100 amp loading capacity
• Tests battery voltage, starter current draw, charging voltage and battery condition
• Heavy duty cable and copper plated clamps
SALE $41.00
ESI 726
Digital Battery & Electrical System Analyzer with Printer
• Tests New Start/Stop Batteries
• 6 & 12 Volt Battery Tester + 12V Start/Stop Battery Test
• 12 & 24 Volt Charging System Tester
• Starting System Tester
• Wide Testing Range from 40 to 2,000 CCA
TPN BT600
2V Battery & 12V/24V System Tester with Printer
• Built-In Thermal Printer
• Performs Complete Battery, Cranking and Charging Tests
• Supports 12V & 24V Lead-Acid Batteries
• Reverse Polarity Protection
• Data Review Function
SALE $139.00
NEW
TPN BTMPROS
BTMobile ProS 12V Battey & System Tester Compatible w/Phoenix Line
• Turns Your TOPDON Diagnostic Scan Tool Into a Battery Tester
• Compatible to Phoenix Line of Diagnostic Scanners
• 3 LED Indicators
• Battery, Cranking and Charging Tests
• Tablet Compatibility
• Ideal for Cars, Light Trucks, RVs, Motorcycles, ATVs, Boats, and More
SALE $122.00
SALE $323.50
ESI 425
Digital Battery & Electrical System Tester
• Tests a wide range of 12 Volt batteries, quickly and accurately…AGM included
• Results display actual CCA
• Also tests the starting/charging system for low cranking voltage
SALE $82.50
Carbon Pile Battery Load Tester
• Large, easy-to-read gauges
• Heavy-duty clamps
• Enables starter and alternator assessment
• 1 Year Limited Warranty
SO 1874 12 Volt Carbon Pile Battery Load Tester
• Variable load capability to 500 amps
• Tests batteries to 1000 CCA
• Variable load capability to 1000 amps
• Tests batteries to 2000 CCA
INV 3721
Battery Monitor™
• Designed for 12-volt negative ground systems
• LCD displays measured voltage with a bar graph to indicate battery charge level
SALE $26.95
SO BA9 12V Digital Battery & System Tester
• 7–15V Operating range
• 40–1200 CCA
• Works on Flooded, AGM, Spiral and Gel Cell batteries SALE $79.95
TAP AND DIES
•
•
•
•
•
38 Pc. Tap & Die PACKOUT™ Set with Hex-LOK™ 2-in-1 Handle
• Hex-LOK™ 2-in-1 Handle is the most versatile threading solution designed for tap and die threading
• 2-in-1 Handle compatibility allows for easy snap in and out, tool-free die and collet changes
• PACKOUT™ Low-Profile Compact Organizer with removable storage tray
• Includes accompanying drill bits for pre-drilling holes
•
971
Kit 48 Pc. SAE & Metric Thread
• SAE Dies 1/4"–5/8", Taps 1/4"–9/16"
• Metric Tap & Dies M6–M14
• SAE and Metric Rethread File (8 sizes each) MADE IN THE USA
•
•
IRW 26377DC
117 Pc. Machine Screw / SAE / Metric Tap & Hex Die & Drill Bit Deluxe Set
• 4-40 thru 1/2-20 course and fine
• 3 thru 12 mm course and fine
• Includes all required drill bits and 5 pc. screw extractor set SALE $482.50
76 Pc. Machine Screw/SAE/ Metric Tap & Hex Die Set SAE 4-40 - 1/2-20 coarse and fine
$121.00 GWR 82812 114 Pc. Combination Tap & Die Set
• 3–12 mm Coarse and fine
• 5 Screw extractors
• 4-40 Thru 1/2-20 coarse and fine
• SAE and Metric thread gauge SALE $428.00
Tap Socket Sets
• Ideal for use where a
• Sockets contained in vinyl holder
CEN 98957 58 Pc. Metric Tap & Die Set T-handle tap wrench, 1/16" - 1/2" adjustable tap wrench,
Bolt Biter™ Wrench Insert Set
• Bi-directional design
• Tapered entry easily seats on a damaged fastener
• Hex base compatible with 6 point, 12 point and spline wrenches
• Ultra-thin design
• Magnetic retention system PART #
EXTRACTORS
GWR 86191 5 Pc. Metric: 8 MM (5/16"), 10 MM, 12MM, 13 MM, 14 MM (-9/16")
GWR 86192 16 Pc. SAE/Metric: -1/4", 7 MM, 8 MM (5/16"), 3/8", 10 MM, 11 MM (7/16"), 12 MM, 1/2", 13 MM, 14 MM (-9/16"), 9/16", 15 MM, 16 MM (5/8"), 17 MM, 11/16", 19 MM (3/4")
GWR 86193
30 Pc. SAE/Metric: -1/4", 1/4", -7 mm, 7 MM, -8 mm (-5/16"), 8 MM (5/16"), -3/8", 3/8", -10 mm, 10 MM, -11 mm (-7/16"), 11 MM (7/16"), -12 mm, 12 MM, -1/2", 1/2", 13 MM, -14 mm, 14 MM (-9/16"), 9/16", -15 mm, 15 MM, -16 mm (-5/8"), 16 MM (5/8"), -17 mm, 17 MM, -11/16", 11/16", -19 mm (-3/4"), 19 MM (3/4")
Bolt Biter Extraction Socket Sets
• Tapered entry easily seats on a damaged fastener
• Square drive with hex base
• Bi-Directional design
• 10X Longer impact life
• Up to 5X greater gripping force
GWR 84783
GWR 84784
IRW 11119
Screw Extractor & LeftHanded Cobalt Drill Set
5 Spiral flute screw extractor sizes and 1 through 5 corresponding left handed cobalt drill bits
10 Pc. Left Hand Screw Machine Drill & Square Extractor Set
• 5 pc drill bits: 1/8"–3/8" & 5 pc square extractors: SQE1–SQE5
• 135° split point and 3 flats on the shanks
• These drill bits often remove the bolt or stud without the need for an extractor. If the extractor is needed, our square style screw extractor will not chew up or expand the object MADE IN THE USA
SALE $122.00
•
•
•
IRW 11135ZR
35 Pc. Extractor/Drill Bit Set
• Forged alloy steel this this tapered style extractor can be used to extract broken studs screws pipe and pipe fittings.
$151.00
$240.00
$111.00
$212.00
IRW 53227 25 Pc. Spline Extractor Set: 1/8"–7/8" SALE $90.50
IRW 394001
5 Pc. Bolt Extractor Set
10
Sizes: 3/8", 7/16" (11 mm), 1/2", 9/16" (14 mm) and 5/8" (16 mm) SALE $44.50
Extractor Sets
• Made from high carbon steel
• Has gradual taper and long flutes. SALE $195.50 MAY 37345
CEN 73215
• Left hand spiral flutes for maximum gripping power
• Hexagonal flats to use with flat or adjustable wrench
86070
84784
APT 1442
SAE/Metric Nut Setting Kit
• 13" Hand Nut/Thread Setting Riveter
• 6 Interchangeable mandrel/nosepiece sets in Metric M5, M6 and M8 and in SAE 10-24, 1/4-20 and 5/16-18
• 10 Each of the following rivet nuts: M5, M6, M8, 10-24, 1/4-20 and 5/16-18
SALE $101.00
APT 1452
XL Nut/Thread Setting Hand Riveter Kit 1/2" Capacity
• XL Model makes setting even extra large rivet nuts like 1/2" and M12 a breeze
• 6 Interchangeable mandrel/nosepiece sets in Metric and SAE sizes: M8, M10, M12, 5/16", 3/8", and 1/2"
• Includes 10 pc. rivet nuts of each included size
• Extra long mandrels in 10-32, 10-24, 1/4-20, 5/16-18, 3/8-16, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5
• Quick-change 13" rivet nut setter and storage case
SALE $117.75
APT ADN38
XL Rivet Nut Drill
Adapter Kit 3/8" Capacity
• Easily convert cordless or corded drills into power rivet nut setters
• Use 12V and up cordless drills for aluminum and steel rivet nuts, or 18V+ for larger sizes like M10 & 3/8" and/ or stainless (drills must feature torque limiting clutch)
• CNC MACHINED from billet aluminum and features durable bearings CR-MO mandrels
• Includes 8 mandrels and nosepieces in Metric and SAE: M5, M6, M8, M10, 10-24, 1/4-20", 5/16-18", 3/8-16"
SALE $107.75
APT ADR14
XL Blind Rivet Adapter Kit - 1/4" Capacity
• Easily convert your cordless, pneumatic or corded drill into a power pop riveter
• Includes nose pieces for 3/32", 1/8", 5/32", 3/16", 7/32" and 1/4" for steel, aluminum, copper or up to 7/32" in stainless
• CNC machined from solid billet aluminum and features Japanese bearings
• Works on up to 0.9-1.0" rivet bodies, maximum stroke of 0.7" SALE $79.14
Poly-Nut Kit
THREAD SETS
PART # INCLUDES SALE
MS 39302 8–32, 10–32 and 1/4–20 Mandrels and nosepieces
52 Assorted Klik Poly-Nuts
MS 39303 4, 5, 6 and 8 mm Mandrels and nosepieces
75 Assorted Klick Poly-Nuts
MS 39001
Rivet Gun Kit
Set includes HP-2 riveter plus an assortment of popular automotive rivets in a molded plastic case SALE $73.15
MS M39400
$141.00
$164.30
Klik-Turn® SRN-2 Swivel Head, Hand Held Rivet Nut Tool
• Quick-change mandrel
• Comfortable hand grips and longer handles to improve leverage
• Can set steel and aluminum rivet nuts up to 1/4-20" and 6mm
• Includes 6-32, 8-32, 10-24, 10-32 and 1/4-20 mandrels and nosepieces SALE $85.30
RN-1 Professional Hand Rivet Nut Tool
The RN-1 features a quick-change mandrel, long handles for improved leverage, and a locking adjustable-stroke.
PART # DESCRIPTION SALE
MS 39304 With 5 Threaded Mandrels 6-32, 8-32, 10-24, 10-32, 1/4-20 and 4 nosepieces #6, #8, #10, 1/4.
MS 39306
MS 39000
With 3 Threaded Mandrels M4, M5, M6 and 3 Nosepieces M4, M5, M6
HP2 Rivet Gun
• Sets up to 3/16" rivets
• Comes with four mounted nosepieces and service tool
SALE $44.90
$88.40
$74.15
MS M39410
HP-4X4™ Multiplex Hand Tool Kit
• Set blind rivets up to 3/16" steel plus rivet nuts up to 1/4"-20
• Includes #3838 Small E-Z Chamfer (8mm – 22mm) and #3840 Large E-Z Chamfer (18mm – 38mm)
• Unique 5-point designs that shear off threads and burrs with minimal passes
SALE $150.00
CTA 3838 E-Z Chamfer®
• Point design for quick and clean deburring
• Single M2-HSS Construction
• Threads and burrs are sheared off creating the perfect chamfer for starting a nut or threading die
SALE $53.00
NES Thread Repair Sets
• One hand tool restores inch or metric, RH or LH threads
• Self adjusting to any pitch and size within range
• Automatically chases good thread sections to repair the damaged parts
• Nylon pads included to avoid marring softer metals or plastics
• No need for calibration or identifying fastener thread type
ANG NES1000
2 Pc . External Universal Thread Repair Tool Set
External 4–38 mm
SALE $257.00
ANG NES1015-ET 3 Pc. Combination Universal Set INCLUDES FREE EXTERNAL THREADMATE™ $54.00 VALUE!
• External 4–18 mm
• Internal 8–16 mm SALE $321.50
ANG NES1A
External Thread Repair Tool
• Out. Diameter: 5/32"–11/16"
• Pipes: up to 1-1/8"
• One hand tool restores Inch or Metric, RH or LH fastener threads
• Floating cutters are self-adjusting to any pitch and size within range
SALE $99.75
ANG NES5
APT 1426
1/4" Heavy Duty Hand Riveter
• Includes 5 nosepieces: 1/8", 5/32", 3/16", 7/32" and 1/4"
• Tool length 20-3/4"
SALE $43.25
MS 39010
Big Daddy® Riveter
• Extra long handles provide excellent leverage
• Comes with 3/16", 1/4" and special 1/4" KlikSplit nosepieces
SALE $232.90
Tight Space Thread Restorer
• Repair inch or metric, right or left handed, coarse or fine threads.
• Works on threaded bolts or studs 3/8" - 11/16" (10mm - 18mm)
• Adjusts and quickly adapts to particular diameter and pitch of fastener thread
SALE $271.50
THREAD SETS
OT 7402
Universal Outside Thread Chaser
• Quickly restore threads to near new condition
• Replaceable V-Pads and dies
• Use for 1-1/4" to 5" O.D.
• Includes standard 6 pc die set
SALE $149.30 MADE IN THE USA
HUK PR75
Quick Set Riveter
• For plastic rivets
• Sets sizes up to 6.6 mm with a single nosepiece
SALE $49.00
DFX DF-CT887 Slimline Plastic Riveter SALE $123.20
FJC 62300
Big Freeze Heater Attachment for Blower
120V/60Hz - 11amp - 5000BTU To be used with Part #60300 (300 CFM Big Freeze Air Blower)
SALE $56.00
PER W5010
1500W Ceramic Space Heater
• With 3 settings, high-1500w, low-750w, and fan only, the heater puts out up to 5120 BTUs and is perfectly suited for a small workshop, garage or work space
• Built-in thermostat
• Stay-cool housing
• 120 volt, 12.5 amp heating element
• Standard 6' 3 prong power cord SALE $61.20
PER W5008
1500 Watt Infrared Shop Heater
• Energy efficient operation coverts nearly all energy into heat
Carbon fiber glass enclosed tube heats up quickly and evenly
• Adjustable thermostat levels and automatic overheating shut-off
• High quality and durable aluminum housing
• Adjustable hanging brackets
SALE $99.50
GWR 3627
2 & 5 Ton Ratcheting Puller Set
• Max Reach: 2-5/8" / 4"
• Max Spread: 3-1/4" / 5"
• Screw Length: 4-1/2" / 8-1/4"
SALE $220.00
OT 4579
9 Way Slide Hammer Set
• 5 lb Hammer, internal/external 2 and 3 jaw puller
• Front hub, rear axle, seal and dent pullers, grip wrench adapters
SALE $204.00
OT 4518
5 Ton Puller & Bearing Splitter Includes: 5" Bar Puller Plus 2" & 3" Bearing Splitter SALE $211.65
OT 4534
Multipurpose Bearing & Pulley Puller Set
For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers.
SALE $270.45
Mechanical Grip-O-Matic Pullers, Reversible
MADE IN THE USA
GWR 41700D
Slide Hammer Puller Kit
• Provides a wide range of puller applications such as: Flange type axles, oil seals and other press fit parts
• Jaws can be set up for 2 or 3 jaw internal or external pulling jobs
$169.00
OT 4517
7 Ton Bar-Type Puller/ Bearing Separator Set
• Includes a bearing splitter with 4" capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a custom forcing screw.
• Up to 7 tons, larger applications, and greater reach 8" to 16"
SALE $282.75
OT 4532
7 Ton Multi Purpose Bearing & Puller Set
• Classic "H" Bar style puller block accommodating 7" to 11" application spread
• 2 sets of forged jaws for a pulling reach range of 5" to 9"Two forcing screws are included for short and long pulls.
SALE $319.15
OT 5056
Slack Adjuster Puller
• Will yank even the most corroded slack adjuster off the S-cam
• Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters.
SALE $205.10
OT 522 Gear & Pulley Puller
• Removes a wide range of gears, pulleys, or other parts that have tapped holes
• Spreads from 2" to 7-3/4" MADE IN THE USA
SALE $117.50
APT 658
Stubby Air Slide Hammer
• The market’s 1st true air slide hammer puller, delivering up to 185 hammer blows per minute with the pull of a trigger
• Compares to a 4.5-6lb manual slide hammer
• Common 5/8"-18 threads for use on the majority of slide hammer attachments
• Both the extension rod and spindle threads match for use with either more reach or as a stubby slide hammer
• Lever throttle allows for adjustment of force and speed
SALE $261.00
CVT 49700
14 Pc. Slide Hammer & Puller Set
• Capable of inside spreads from 3/8" to 1-1/4" and outer spreads up to 3"
• Puller reaches depths up to 2.5" SALE $90.50
MADE IN THE USA
•
•
$69.50
WHI UTDII
38" Heavy Duty Under the Dash Creeper
• Fully padded with heavy duty vinyl
• Adjusts from 13" to 24"
• Steel stand folds easily for storage
• Heavy Duty board supports 350 lbs
• Overall dimensions: 17" × 38"
• Ground clearance: 1-1/4" MADE IN THE USA SALE $268.00
THA 69204 Foldable Automotive Engine Creeper
• Topside creeper movable ladder for trucks workstation, shop mechanic, fleet, emergency repair and home garage
• Heavy-duty Material
• 4 Rotating Wheels, Help you move easily and safely around your vehicle.
•
SHOP SEATS & STOOLS
SX 8509
EZ Set Adjustable Shop Seat SALE $109.00
SX 8503
Replacement Casters For Creepers
• Works with current Sunex creepers and other applications
• Includes: (1) 2-1/2" caster, (2) inserts and (2) lock washers SALE $10.75
• Air cylinder for easy height adjustment
• Heavy duty, chrome finished casters with rubber tread
• Large steel reinforced tray SALE $198.00
•
•
STK 20350
Pro Step Heavy Duty Stool
• 500 lb capacity platform
• Foam bumpers
• Universal saddle and adjustable corner brackets
• Head tilts front to back and side to side
• Foot-operated pump and lowering pedal
• Built-in safety overload system
• Wide leg base and 4" polyurethane swivel wheels
• Min/Max Height: 35" / 71-5/8"
• Spring-loaded retractable wheels
• Height adjustable from 6-1/2" to 22-1/2" SALE $221.50 SX 8514 Tractor Seat
•
•
•
•
with swivel casters
• Two caster wheels have locking feature.
• 2 Stage telescopic design
• Saddle adjusts to multiple angles
• Increased base size
• Ball bearing castors
•
•
•
•
•
•
•
• Min/Max Height (Jack): 5-1/4" / 19-1/2"
• Min/Max (Stands): 11" / 16-5/16"
• Two piece handle
• Safety bypass system for cylinder protection
• Heavy duty chassis
THA 62220
22 Ton Hydraulic Axle Jack
• 1 Pc. heavy duty “T” handle with three locking positions: 90°, 45°, 0°
• Chrome plated ram
• Adaptor: 3/4", 2-1/4" and 4" for extended reach
• Built-in in-line air filter
• High speed turbo
LIFTING - SERVICE JACKS
THA 62035 3-1/2 Ton Heavy Duty Service Jack
• Heavy Duty and Low Profile Model, Suitable for SUV Applications
• Universal Joint Mechanism
• One piece Handle with a Foam Sleeve
• Industrial Grade Castors
• Reinforced and Heavy duty Lift Arm Axle
• Double pump piston
• Meets ASME/PASE 2014 Standards
• Min/Max height: 3-3/4" / 21-3/4"
• Min/Max Height: 4.1" / 20.5"
THA 62021
2 Ton Low Profile Service Jack
• True “low profile” design with deep reach at minimum height for low clearance vehicles
• Universal Joint Mechanism
• One piece handle with a foam sleeve
• Industrial grade castors
• Double pump system raises the saddle to the load quickly
• Safety bypass system for cylinder protection
• Meets ASME/PASE 2014 Standards
• Min/Max height: 2-3/4" / 24"
3.5 Ton Service Jack
• Meets 3.5Ton ASME PASE-2019 Standard 3000KG for CE/GS
• Low Profile design
• Built-in safety valve protects against jack over-loading
• Hydraulic oil by-pass system protects ram from being over-extended
• Min/ Max Height: 3.78” / 23.42" SALE $360.00
• Innovative Lightning Lift™ hydraulic system provides ultimate performance and maximum speed
• Heavy-gauge steel and flanged side plates
• Tough UV powder-coated frame
• Universal joint technology provides a smooth and controlled descent
• Crowned front wheels decrease surface contact
• Ball-bearing rear-mounted swivel casters provide easy maneuverability
• Industrial-quality seals and O-rings
• Foam pad on handle and cushioned saddle
• Large saddle provides generous lifting area
• Built-in bypass system prevents accidental overload and improves operator safety SALE $479.00
• Long T-handle design
• Large 8" diameter rubber wheels
• Fully welded hydraulic pump and cylinder
• Heavy-duty wiper seals SALE $767.00 AFF 402SD-JS6 4 Ton Lightning Lift™ Super Duty Floor Jack - 2 Pc. Handle INCLUDES FREE JACK STANDS 6 TON RATCHET (PAIR) $210.00 VALUE!
OT HDJ5
5 Ton Service Jack
• Lifting range: 6" to 22"
• Built-in safety overload
• Convenient foot pedal
• Handle lock and release controls are located on top of the spring-loaded handle
• Handle can be locked into any position
• Cycle tested design for long life
• Meets all 5 ASME PASE-2019 safety standards for service jacks
$1,424.00
OT UA22
22 Ton Under Axle Jack
• Lifting range: 8.27" to 20-2/3"
LIFTING - SERVICE JACKS
• Frame height: 8.27", Footprint: 22.63" x 11.73
• Reach: 69.87"
• Includes 3 saddle’s, 3" diameter
• T-Handle length: 47.24"
• 7.88" rubberized steel wheels
$1,320.90
SX 6602RJ
2 Ton Off-Road Jack
• Compact, Lightweight Design
• Heavy-Duty Wheels
• Dual Pistons for Rapid Rise
• Engineered Full-Length Wrap-around Steel Skid Plate Provides reliable stability in gravel, sand, and soft surfaces
• 28.4-in. lift height
• Locking Adjustable Height Adapter
• Handle Lock Detent for Maneuvering
• Ideal size for full-size pickups, SUVs and loaded tradesmen vehicles.
• Meets all 5 ASME PASE-2019 safety standards for service jacks
• Under load, the dual-stage hydraulic unit can reach maximum height in 7 pumps
• A padded spring-loaded handle rapidly returns after each pump, to lift the vehicle faster with less effort
• Heavy-duty rolled edge construction
• Cycle tested design for long life
• Lifting range: 5.2" to 21.9"
$501.90
OT LDJA2
2 Ton Aluminum Racing Jack
• The lightweight, 41 lb jack includes side handles
• Quick-lift design
• New and improved hydraulics and a wider track
• 4' padded lower handle
• Rubber saddle
• Cycle tested design for long life
• Lifting range: 3-1/4" (saddle removed) - 18-5/8" SALE $638.40 OT LDJ35 3.5 Ton Service Jack
SALE $421.50 SX 6603AJ-TS 3 Ton Aluminum Floor Jack INCLUDES FREE TRACTOR SEAT $198.00 VALUE!
• Lightweight Design, just over 55 lbs
• High performance seals
• Side mounted handles
• Saddle pad & foam bumper
• Rapid-Rise™ technology with dual pump
• Min / Max: 3.85" / 19.4"
• Swivel caster wheels and wide track front wheels SALE $419.00
SX 6622
22 Ton Air/Hydraulic Truck Jack
• Release knob on top of handle operates independently of handle locking lever
• Designed for heavy duty use
• Narrow chassis design
• Self-retracting ram
• Four adaptors (1.875)
Air / Hydraulic Service Jack
• Rugged steel frame
• Bearing-mounted rear swivel casters and front wheels with roller bearings
• Spring-loaded handle may be locked in three positions,
• Cycle tested design
$900.50 SX 66037JPK 3.5 Ton Capacity Service Jack with Quick Lifting System INCLUDES FREE 6 TON JACK STANDS
THA 67020 2 Ton Folding Engine Crane
• Min/Max Height: 9-1/2" / 74"
• Equips with 8 Ton Hydraulic Long Ram
• Professional Heavy Duty Quality Built In SALE $712.00
THA 67080 8 Ton Long Jack
• Min/Max Height: 24"/43-11/16"
• Polished Ram for Durable Performance
• Heavy Duty Welded Construction with Rugged Reinforced Tubular Steels SALE $142.00
LIFTING - JACK STANDS
THA 63121
12 Ton Quick
•
• Patented quick lifting design will lift the ratchet bar to the desired height with the simple raise of the locking handle
LIFTING - BOTTLE JACKS
Steel Bottle Jacks
• Designed for severe duty
• 100% factory tested to meet most current ASME/PALD 2014 safety standards
• Wide base design and hydraulic bypass safety system
• Heat treated extension screw on polished ram
• Carry handle included on models 12 ton and higher
Pro Series 2 Ton Bladder Jacks
• Easy up and down function handle
• Heavy Duty designed air-bags
• Min/Max. Height: 4.5" / 17"
• Working Air Pressure: 100-145 PSI
Ratchet Style Jack Stands
• Locking pawl with built-in counter weight to secure the ratchet bar at the designated heights
• Meets both ASME PASE-2019 safety standards for jack stands.
SALE $193.70
OT 5018A Truck Clutch & Flywheel Handler
• Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs
• Includes a 2" splined shaft with a 1-1/4" pilot
• 360º swivel head.
• Minimum height of 15"
• When raised, center line of clutch will be 38-1/4" off floor
THA 61202
20 Ton Air/Hydraulic Bottle Jack
• Min/Max Height: 10-1/4" / 20"
• Extension Screw 3-1/8"
• Built-in bypass device to protect hydraulic system from being over-extended
• Polished ram provides durable performance
• Wide base for stability and security
• Heat-treated extension screw for easy adjustment
• Cross release valve for controlled lowering
• Built-in safety protection valve to prevent overloading
APT 5302A
20 Ton Air/Manual Bottle Jack
• Min/Max Height: 10-3/8" to 20-1/16"
• Air hose can swivel in any direction
• 2 Piece long handle
• Designed for operating either manually or pneumatically
• Extension screw gives added height when necessary
20 Ton Low Profile Air/Manual Bottle Jack
• Min/Max Height: 7" to 12.75"
• Designed for operating either manually or pneumatically
• Air hose can swivel in any direction
• Extension screw gives added height when necessary
• Heavy duty design SALE $224.00
3/4 Ton Auxiliary Stand
• Min/Max Height: 53-1/2"/ 80"
• Heavy duty stamped and formed steel construction provides stability and rigidity
• Designed to support vehicle components, not the vehicle
1,500 Lb Capacity Underhoist Auxiliary Stand
• Extends from 54.25" to 80.75"
• Adjustable saddle is raised or lowered quickly via bearing mounted T Handle
• Circular base allows rocking for easy positioning while providing a stable foundation for the stand
SX 6811
3/4 Ton Short Underhoist Stand
• Designed to support vehicle components “waist and chest high” on a two-post vehicle lift
• Bearing mounted spin handle and selflocking Acme threaded screw
• 12" diameter base
• Slender and lightweight design
$109.00
SX 7708
1500 lb Car Dolly
• Max Tire Width: 12.8"
• Max Opening: 28.0"
• Can be used in singles, pairs, 3's, or 4's to move vehicles in any direction
• Sturdy ratcheting design is maintenance free
• Locking casters on outboard wheels, complies ASME-PALD 2014 standards
SALE $314.50
ESC 70130 Truck Wheel Dolly
THA 66040
Collision Repair Kit, 4 Ton
•
• 8,200 PSI output pressure
• 10-1/2" Ram minimum
• 4-3/4" Stroke
• 21.5 CU.IN oil capacity
• Perfect for 8-10 hole Budd type wheels
• Tire/wheel is rotated left or right on tiltable roller pads for perfect stud alignment
• Removes tire/rim assembly fast and easy
• 3" caster/wheels
• Works with standard size truck tires 19.5" through 24.5" SALE $138.25
•
THA 66100
Collision Repair Kit, 10 Ton
•
•
• 5-1/4" Stroke
THA 66103
Air / Hydraulic Pump
• Max operating pressure - 10,000 psi
• Reservoir capacity - 103 cu.in
• Usable oil volume - 97.6 cu.in
• Input air pressure - 90-175 PSI SALE $335.00
•
OT 5017A Brake Drum Dolly
• Remove, install, and transport truck brake drums without physically having to lift them.
• Works on 15" and 16-1/2" drums found on most Class 7 and 8 tractor and trailer brake systems.
LIFT ALIGNMENT
TX 962
Lift Alignment Tool
• Designed to streamline the positioning of lift arms to vehicle lift points
• Capability to position both front and rear arms
• Lightweight robust design
• Equipped with two flush-mounted laser guides, provides precise visualization of the outer edge of the lifting point, facilitating accurate alignment
• The laser guides feature a simple twist-on/off mechanism and easily replaceable batteries
• Designed to accommodate most lift pads up to 6.75" and adjustable for added versatility
• Magnetic hook for easy storage right on the lift
• Contains all the tools necessary for pushing, spreading, and pressing of vehicle body panels, parts and assemblies
• Auto air bleed pump eliminates the need to bleed system prior to use
• Chrome plated pump core and piston rod
• Double braided hydraulic hose
• Attachments are interchangeable with other body and frame kits
• Meets or exceeds ASME/PASE 2014 SALE $378.00
Forney Easy Weld® ADF Welding Helmets
• Easy to operate switch functions
• Viewing Area: 5.97 square inches
• DIN 9 to 13 Variable shade selection (TIG operable to 5 amps)
• Lightweight, impact resistant, fireproof shell
• Two optical arc sensors
PRO ADF Welding Helmet
• Dual crown strap headgear with multidirectional adjustment
• Quick-fit, 5-point adjustable geared headband
• External quick-release button
• 10.44 square inches (3.94" x 2.65") viewing area
• Four optical arc sensors
• Internal stepless controls include both sensitivity and delay
• DIN 5 to 9 for low amperage MIG welding or plasma cutting; DIN 9 to 13 variable shade selection (TIG operable to 2 amps)
• Solar cells with 2-each replaceable 3V lithium batteries
• Meet or exceed all related CE & safety standards
55935
SPH 3010059
Gen X Series Welding Helmet, Black Asp
• Large viewing area, 23 square inches
• 180° ADF Holder lens (Shade #10)
• High quality ADF fixed shade 3/10 with a 2 year warranty!
• 9 Point high quality adjustable halo headgear with replaceable sweat absorbent headband
• Meets or exceeds ANSI, CE, AUS/NZ And CSA standards! SALE $157.00
SPH 3011322
Gen Y Series Welding Helmet Gate Keeper
• Large viewing area, 23 square inches
• Adjustable ADF integrated into a 180° lens design
• Ear to ear vision
• 4/9-13 Adjustable ADF with grind mode
• Face forming profile
• High quality halo headgear
• Headgear adjustments allows you to move the helmet closer or further away from your face
• All parts are replaceable/interchangeable with other series
• Meets or Exceeds ANSI, CE, AUS/NZ And CSA Standards SALE $235.75
EFP - I Series Welding Helmet
Forney®
ADF Welding Helmets
• Lightweight, impact resistant, fireproof shell
• Viewing Area: 5.97 square inches
• HD Optical clarity with true color technology
• DIN 9–13 Variable shade selections
• Two optical arc sensors
PART # GRAPHICS SALE FOR 55857 BLACK MATTE $81.00 A FOR 55858 THE ANGLER $91.00
• The world’s 1st and only ADF integrated into a 180° welding lens
• Internal adjustable ADF; shade 4/9-13
• Comes with an additional clear passive lens for additional grinding/cutting/splash guard functions.
• 80° Perfect peripheral vision
• Face forming profile
• Shade and sensitivity controls
• Power supply: solar with replaceable batteries
•
•
•
FOR 410
220 MP Multi-Process Welder
Multi-Process MIG, TIG & Stick Welder
• 120V/240V Input power with 220 AMPs of welding power.
• Welding Capacity: Up to 1/2 inch
• All-Metal Drive System
• Multi-Process
• Digital Displays
• 3- Year Warranty
• Includes: 12.5' 200 AMP PRO-Grip MIG Gun, 15' Ground Clamp with Cable, 15’ Electrode Holder with Cable, 15’ Input Power Cable, Flowgauge with Hose, and Extra Contact Tips
$2,125.00 FOR 309 140 Amp MIG Welder
• Welds up to 1/4"
•
TTN 41197
Welding Cart
• Tilted top shelf
• Durable steel construction
• Side hooks for storage
• Additional shelves for storing welding helmets, equipment and accessories
• 1.125" Outer diameter spout for quick and easy pouring
• The anti-splash lip
• Resistant to chemicals and solvents.
LS 17922
Multi Drain Tub, 30 Qt
• All purpose, heavy duty plastic
• 33" (W) × 22" (L) × 8" (H)
OVERSIZED ITEM ADDITIONAL SHIPPING MAY APPLY
SALE $71.00
19732
6 Quart Oil Dispenser
• Holds complete oil change up to 6 quarts
• Translucent polyethylene SALE $24.00
19702
8 Qt. Dispenser with Lid & Cap
• Translucent polyethylene material to read the oil level
• Flexible, removable 8" pouring spout
SALE $29.50
LS 17232
Right Angle Funnel
10" Tall translucent funnel with a 6-3/4" offset from center of mouth to center of spout.
SALE $10.00
LS 50240
Magnetic Funnel Holder
• Accommodates various style and size funnels
• Strong neodymium magnets
• Holder collects residual fluids as they drain into the 12 oz. reservoir
• Funnel sits slightly angled
• Made of polypropylene for durability
SALE $30.00
PLW 75-025
Radiator Filler, 3 Gallon
Impervious to oil, gasoline and antifreeze
SALE $32.00
PLW 75-072
6 Quart Polyethylene Plastic Funnel with Screen
SALE $11.00
LS 11102
8 Gallon Oil Lift Drain on Wheels
• 15" Funnel with strainer
• Working range: 36-1/2"–74"
• Features handle for easy emptying
• Reinforced base SALE $225.00
LS 17892
Transmission Drain Funnel
• 22" × 23"
• Extends the reach of any lift drain (Perfect partner to LS 11102)
No Splatter Pad Fits all standard transmission
8 Pc. Custom Oil Funnel Set
• 45° Elbow extension
• Includes funnel and seven adapters to fit over a hundred models including Acura, Buick, Chevrolet, Chrysler, Dodge, Fiat, Ford, GMC, Honda, Hyundai, Jaguar, Jeep, Land Rover, Lexus, Mazda, Nissan, Oldsmobile, Pontiac, Scion, Subaru and Toyota
AST OFEU19
Euro 1/4 Turn Oil Funnel Adapter and Funnel
• Comparable to #OFAUD1000
LS 24780
18 Pc. Spill-Free Funnel
• Comes with a lid to keep contaminants out as well as store the caps and adapters
• Eliminates trapped air pockets
• Five different colored radiator adapters and six caps to fit most cars, pickups, trucks and many farm tractors. Two straight extensions and two 45° elbows for angled and hard-to-reach applications
• Supersedes #24970 Spill-Free Funnel with VW Adapter
SALE $49.00
LS 19912
14 Pc. Multi-Application
Oil Funnel Set
• Includes two new adapter for Volvo and Chrysler/Dodge/Jeep
• Helps eliminate oil spills when refilling crankcases, especially those with baffle valve covers
• The 1.6 qt. translucent funnel comes with 14 different color-coded adapters and a 45° elbow
• Adapter holders keep adapters organized
• Tethered lid and cap keep the funnel clean SALE $79.00
Form-A-Funnels
• Thick, pliable nitrile rubber coating completely encases a thin, bendable layer of aluminum alloy that resists wear
• Reshape and reuse it over and over.
• Works in temperatures from -30ºF to 425ºF
• Specifically designed to attach to the valve covers
• Machined from aluminum
• Also fits Teledyne 550 and 520 engines found in Beechcraft and Cessna aircraft
SALE $64.75
AST FUNAU-VW22
VW/Audi Funnel Adapter
• Oil filling Funnel adapter for newer Audi with 3 tabs and VW with 4 tabs on the oil fill caps
• Must be used in conjunction with #FUN14FUNNEL OR #FUN19KIT
SALE $37.25
WHI FNLBDY Funnel Buddy
• Mounts to most surfaces including tool boxes
• Transparent funnel and collection bottle are removable
• Funnel and collection bottle are included SALE $78.50
OT 5911A
Drain Plug Pro™
Magnetically attaches to pre-loosened oil pan drain plugs so you can remove them SALE $28.30
OT 6792
Transmission Fluid Fill/ Extract Kit with Adapters
• 6L (1.5 gallons) Reservoir bottle
• Powered by shop air
• Press-on quick connection for one-hand setup
• Universal adapter plus 14 OE-style adapters
SALE $533.50
• Simple to use and clean
• Durable design for long life
SALE $71.50
MV MV6400 Fluid Dispensing System
• Performs hydraulic brake and clutch bleeding with additional adapter purchase
• ON/OFF and flow control valve are conveniently located near fluid output
• Drain can be emptied by gravity drain, diaphragm evacuation pump or air evacuation
Long Reach Angled Nozzle Blow Guns
• 85-125 PSI operating range
• -20° to 160° F (-29° to 71° C) temperature operating range
• Air consumption 9.8 CFM at 90 PSI using 1/4" hose
• 1/4" NPT Female aluminum air inlet
SG 99500 4-1/2" $15.00
SG 99510 10" $19.25
SG 99520
SG 99350
Air Blow Gun Kit
Includes: 4" Angled nozzle blow gun, Rubber nozzles (1 each): 15mm, 24mm and 35mm dia., High volume venturi nozzle, OSHA compliant safety nozzle and clear, plastic shield.
SALE $50.75
SG
AIR LINE PRODUCTS
CHS TYP-2500CS
Typhoon High Flow Blowgun
• High Volume Tip
• Tough die cast zinc construction SALE $31.80
CHS TYP-2501CS
Typhoon Pro Blowgun
• High Volume Tip
• Plated, All-Metal Construction provides easy cleanup SALE $50.50
Typhoon Extension, High Flow Safety Tip
• Equipped with High Flow Typhoon Nozzle
• Can be installed onto any Typhoon
• OSHA Compliant
PART #
CHS EXT12CN-DPB
CHS EXT24CN-DPB
CHS EXT36CN-DPB 36" $27.30
• Seven quick-connect tips
Angle Blowgun with 1/2"
Removable Rubber Tip
• Air pressure: 90–120 psi
• High impact plastic body with built-in hanger slot
• 120V Electric Pump
• 17 Gallon capacity reservoir
• Overall height: 17-3/4"
• Large 20" × 29" recessed area for capturing fluid and removable metal screen
• Recessed pockets at each corner provide storage for drain plugs and filters
• Comes in a case with an EVA insert SALE $51.75 MT S-153 Rubber Tip Blo-Gun
Air Comb™ 90° Multi-Port Air Flow Filter and Radiator Cleaner
• First-ever product with focused high-pressure output through multiple holes and a long reach 90°
• The best solution to clean cylindrical truck and tractor filters, washable automotive filters, radiators, external air conditioning units, engine compartments, head bolt holes, ventilation systems, as well as for body and frame restoration and more
• Positive leak proof connection when blowing out fluid lines.
• Precision-machined tire inflator adapter that easily connects the LockNFlate® Air Chuck to any inflator or pump with a screw-on, or other, female Schrader valve connection such as the Milwaukee M18 Inflator, and others.
• Spec: 1/4 NPT (m) to standard Schrader valve (m) [VG8/8V1 valve threads]
MADE IN THE USA
SALE $10.00
LNL LNL65002
LOCKNFLATE® Locking Air Chuck - Closed
• Over 3.5" of reach. Six steel jaws lock onto any Schrader valve
• Works with Milwaukee®, DeWalt®, or other battery inflators
• Closed flow, rated to 150 psi, 1/4" NPT
SALE $44.00
1/4" Hi Volume Coupler & Plugs
The Air Flow of a 3/8" Coupler in a 1/4" Body Size
• Rotatable design allows for better positioning to work inside of wheel
• Adaptable for a larger
• Allows for faster, more efficient filling SALE $7.99
®
•
• Chemical resistant
•
CT 3S402A
STORM™ Thread Depth Gage
• Wide base for big treads
• 1”+ range
• Fractional scale reads 32nds only
• Spring loaded SALE $23.90
MT S-448
Tire Tread Depth Gage
• Round aluminum indicator bar calibrated
0 to 1" in 1/32" markings
• Handy pocket clip
MADE IN THE USA
SALE $6.75
FOW 74-225-505-0
Auto Tread PLUS Tire Gage
• IP54 protected against fluid and dust
• Super-large LCD display, 14mm height
• Easy access hold button
• Range: 1"/25mm
• Supplied in vinyl holster SALE $32.10
BJT KT-340
T-Bone Passenger Car Tire Repair Kit, 40 Repairs
Kit Includes: 2 T-Bone Handles, 1 with a spiral probe and 1 with a 4" open eye needle, 6" spare needle, a screwdriver with reversible shaft, and a valve core removing tool, hex wrench, a specially formulated lube, razor blade and 40 repairs ((20) 4" Large dia., (20) 4" Small dia.) in a custom form fitted case.
SALE $71.00
Repair Refill Kits
• Manufactured using 12 strands of high-tensile Kevlar
• Individually impregnated with live butyl rubber. Using carbon black, making the repair almost invisible.
• Conforms to size and shape of the injury, sealing out moisture and dirt, eliminating stress to the belts and preserving the tire integrity. This is the reason that BlackJack Tire Repairs are a PERMANENT repair.
KN 34549
Dual Wheel Separator
• Innovative “One-piece”
• Forcing screw and pullers have powerful 1-1/8" diameter x 11 threads
• Pusher is ball bearing-driven for near zero turning resistance
• Quickly and easily remove stuck or frozen dual steel wheels
• Includes (2) pullers to cover large and small dual wheel applications
• Use with air impact wrench SALE $285.50
Tubeless Truck Tire Irons
CVT 85110
2-In-1 Digital Tire Gauge With Pen Light
• 4 unit of measure tire gauge modes: PSI, BAR,KPA, KG/CM2
• LCD screen with backlit display
• Pressure range: 3-150PSI
• LED Flash light, main light with 2 modes
• 36" type-C USB charging cable
SALE $49.50
Tire Deflator for TPMS Valves
• Deflates tire pressure gradually without damaging TPMS sensors.
• Universal thread size: 5/16" x 32 UNEF
• No need to reset the TPMS.
$19.00
APT 7445
45 Pc. Tire Repair Tool Kit
• Heavy-duty T-handle insert tool and T-handle spiral probe reamer
• Easily access the inner valve stem on trucks with dual wheel setups
• Designed with the precise bends, handle length and socket configuration
• Applications include medium- and heavyduty Class 7 and 8 trucks
SALE $37.75
KN 29999
ValveCapper® PRO
4 Tools in 1: Cap and Core Remover/Installer
• No more dropped caps — holds onto caps and valve cores for removing and replacing
• Longer valve cap grip works on flowthrough, double seal valve caps
• Demount all 17.5"–24.5" tires and up
• Can be used on Super Singles up through 315/22.5, including most radial and bias ply tires.
• Only lift tire once
• Does not damage the bead
• Can be used while wheel is on vehicle
• Demount tire in less than 30 seconds! OVERSIZED ITEM ADDITIONAL SHIPPING
STL 96090A
7 Pc. Spare Tire Tool Kit
• At 11-3/4 inches it has enough reach to get the job done
MADE IN THE USA
SALE $15.25
Allows anyone to quickly remove difficult to reach spare tires - No more digging through your client’s vehicle to locate the spare tire removal kit SALE $116.75
LN 917 Air Operated Chassis Lubrigun
• Fits 120 lbs original refinery container
• Powerful 50:1 ratio
• Includes high pressure control valve, air coupler, universal swivel, follower plate and roll-around base SALE $1,736.00
whip hose and coupler. SALE $52.50
LN 740
High Pressure Control Valve
• Use with power grease guns
• Includes 6" extension tube
• 1/4" Inlet
SALE $190.75
LUBRICATION
LN 1154
Dual-Piston Lever
Action Grease Gun
• Thumb-operated switch to toggle between high-pressure and high-volume positions
• Provides quick and efficient lubrication
• Quick-prime design has the tool operational immediately MADE IN THE USA
• Designed to lock the camshafts in their required timing position SALE $74.50
CTA 2221
Ford/Mazda Master Timing Kit
• Comprehensive tool kit is services on many Ford/ Mazda models from mid-90's through today.
• Ford 1.4L, 1.5L, 1.6L, 2.0L, 2.3L & 2.5L engines which are all variations of the EcoBoost, Duratec(Flex Fuel) & GTDI engine
SALE $208.00
LS 37230 Timing Tool for Ford 3.5L Turbo
• For Use When Servicing the Timing Chain on 2017 and Newer Ford V6 3.5L Turbo Engines
• The tool helps ensure camshaft alignment during the removal and installation of the timing chain.
SALE $84.50
TX 430 Hood/Tailgate Prop
Clamps to weak gas cylinder lifts to hold up hood or tailgate SALE $16.50
LS 43350
Pneumatic Fan Clutch Wrench Set, 10 pc
• Set includes nine driving wrenches that fit Ford, GM, VW, BMW, Chrysler and newer International. Driving wrench sizes include: 7/8", 32mm, 36mm, 40mm Thin, 47mm, 1-7/8", 2", 52mm, and 2-1/8"
• Use with an air hammer SALE $225.00
LS 43300
8 Pc. Pneumatic Fan Clutch Wrench Set
• Sizes: 36 mm, 1-1/2", 1-9/16", 41 mm, 42 mm, 1-7/8" and 2"
• Includes handle assembly
SALE $191.50
LS 50210 Gasket Separator
• For use on any application with a gasket seal such as oil pans, transmission pans and differential covers.
• Drive tool between the gasket and then use a hammer from the side to separate the pan from the gasket.
• Blade is made from hardened carbon steel.
SALE $32.00
LS 52500
Mechanic's Stethoscope
Unique sound chamber and super thin diaphragm greatly amplifies sounds
SALE $25.50
SPI 95210A
Double Open-Ended 36mm & 48mm Forged Fan Clutch Wrench
• 15" length with angled heads
• Works on fan clutches equipped with either a 36mm or 48mm hex SALE $123.00
OT 6613
Variable Pin Spanner Wrench
• Universal design fits many different types of pulleys having slots or holes, including camshaft pulleys and crankshaft pulleys
• Wrench range: 1-1/4"–5" -- Sizes: 3.5–10 mm
• Works with 1/2" ratchet or breaker bar
SALE $128.20
TX 939
Magnetic Strut Rod Lock
• Fits strut rods up to 9/16" in diameter
• Magnet allows for one-handed application
• Securely attaches to strut rod and holds hood, trunk or tailgate in place MADE IN THE USA
LS 44880
Lift Support Clamp with Magnet
• Holds gas charged lift supports up to 9/16" found on hoods, tailgates, hatchbacks and trunks. neodymium Magnet Holds the Tool in Place While Securing the Clamp
• The colorful flag is a reminder to remove the clamp after use
MADE IN THE USA
SALE $17.50
LS 45900 Hood Prop - Extends: 18-1/2"–46-3/4" MADE IN THE USA SALE $56.00
V389 Hood & Lift Gate Prop with Auto-Adjusting Rod, 36"–78" SALE $76.25
VIM V387G High-Vis Hood Prop
• Auto-Locking prop
• Adjustable to 6 different positions
• Rubber tips on both ends, the hood
• Double locking system to extend hood prop 31"–60"
• Aluminum construction and NBR & PVC grip SALE $47.00
VIM MSPM100
12 Pc. 3/8" Dr. Magnetic Spark Plug Master Set
• Metric, SAE, 6-point, 12-point, standard length, extra deep, thin wall, universal joint and dual drive
• Equipped with magnetic ring inserts
• 6-point sockets are single knurled and 12-point socket is double knurled for easy identification
• Dual drive feature enables you to turn sockets using either a 3/8’’ dr. ratchet for the internal drive or a wrench for the external drive SALE $199.25
4 Pc. 3/8" Drive Spring-Return Spark Plug Socket Set
• Flexible operation for hard-to-reach places
• Matte finish, Chrome Vanadium
• Knurled for improved grip
• Includes four sizes: 14mm, 9/16", 5/8" & 13/16" SALE $49.50
ENGINE - MECHANICAL
SPI 15510
NOx and Soot Sensor Socket, 24mm Designed to remove
SALE $43.75
CVT 84100
11 Pc. Oxygen
Sensor Socket Set
LS 12290 NOx & Soot Sensor Socket Set
• Includes 24mm & 30mm offset sockets with 1/2" drive.
• Each socket has 6 and 12 point options.
• Works on 2014-current Ram 3.0L EcoDiesel V6 engines found in Jeep Grand Cherokee and Dodge Ram 1500 Trucks
SALE $46.00
LS 12030
10 Pc. Flare Nut Socket Set
• The socket design allow access to difficult wired temperature sensors, thermo switches and other components
• Works on ABS, master cylinder, coolant, and diesel injection sensors
• 3/8" square drive with chrome finish
• Set includes: 10–19mm
SALE $175.00
Sensor Thread Chasers
MADE IN THE USA
GWR 80601
5 Pc. 3/8" Drive
Magnetic Swivel Spark Plug Socket Set
• Magnetic Insert Holds Plug for Removal and Installation
• Extra Long Reach 5/8" Magnetic Swivel Spark Plug Socket
SALE $104.00
CVT 389-100 Spark Plug Repair Kit Single 5.4L Replacement Insert SALE $31.75
• Specifically Designed for Telsa
• Manipulate Manual Door Release Lever
• Protects Thin Laminated Window Glass
• Works on Model S, Model 3, Model X, and Model Y SALE $37.95
LTI 994
Shockit Socket O2 Sensor Removal Kit
• Air hammer powered Shockit Sockets to access, loosen, and remove frozen and obstructed O2 sensors
• Non-slip self centering air hammer angled punch for limited access applications
• Dual ear socket design for 90° rotation without repositioning socket
• 18mm dual sided tap/bottoming die
SALE $169.00
LTI 996D
Shockit™ Socket Diesel NOx & Particulate
Sensor Removal Kit
Air hammer powered Shockit™ Sockets for removing diesel exhaust sensors
SALE $409.00
• For removal and installation without damage to sensor
• Includes the most popular sizes of oxygen sensor sockets
• Comprised of SAE and metric sizes
• Blow molded case included SALE $146.00
15 Pc. Ratcheting
Serpentine Belt Tool Set
• Includes 6 Point Sockets: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm
• Includes Crowsfoot: 13mm, 14mm and 15mm
• Includes Long bar, 3/8", 1/2" and 3/4" Adapters
• Stretches All Pipe Including Stainless Steel
• Use with an impact wrench to quickly stretch pipes
• Collet sets expand pipes from 1-5/8" to 4-1/4"
MADE IN THE USA
SALE $299.00
• The tool holds the belt on the pulley as the engine in rotated clockwise to install the belt
• Works on 2011 and newer Ford 3.5L EcoBoost and 3.7L engines, as well as 2019 and newer GM 5.3L and 6.2L engines SALE $35.00 LS 59370
Stretch Belt Remover/Installer
• Combination Removal and Installation Tool for Most Stretch Belts
• Unique magnetic faces hold the tool in place on the pulley
SALE $25.00
LS 59560
Stretch Belt Tool for GM
Double Sided Design Allows the Tool to Work on Both A/C and Main Drive Pulleys When Installing Stretch Belts on GM 5.3.L, 6.2L, and 6.6L Gas Engines.
MADE IN THE USA
SALE $17.50 LS 17350 Pipe Stretcher Kit
SPI 64900B
3 Jaw Pulley Puller Ford®, Chrysler®, GM®
• Spring loaded Silver Universal Legs maintain leg position and control when installing the puller in confined areas.
• Eliminates the need to remove the radiator or other components.
SALE $236.25
LS 53790
Harmonic Balancer Installer Kit, 13 Adapters
• Installs Harmonic Balancers or Drive Pulleys that are Pressed on the Crankshaft.
• Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers
• The 1.75" spacer allows the tool to work more effectively on deep harmonic balancers
MADE IN THE USA
SALE $231.00
Harmonic Balancer Sockets
• Heavy-duty impact sockets designed with more than three times the standard socket mass to direct more energy to removing the bolt.
• Use with 1/2" drive
LS 77080 Honda
OT 6667
Damper Pulley Puller
• Designed for removing damper pulleys in tight engine compartments, without removing the radiator
• Includes: the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8" square drive for ratchet use and a 3/4" hex for wrench or socket use
SALE $130.80
MV MV8000
Automotive Test & Bleed Kit
Kit includes: Vacuum pump with gauge, 4-1/2 oz reservoir jar with fluid transfer and storage lid, (2)–2' long 1/4" ID hoses, rubber cup adapter, (2) universal bleed screw adapters, vacuum “T” adapter, automotive test and bleed adapters
SALE $65.00
PER 89710
Harmonic Balancer Installer
Special adapters make this a complete master harmonic balancer installer set for most car and light truck applications
SALE $57.35
APT 78450
HD Harmonic Crank Pulley Puller
• GM LS, Ford Coyote, GMC, Chrysler, Dodge & Jeep
• For use crank pulley dampeners without female threaded holes
SALE $77.50
LS 51450
Harmonic Damper Pulley Puller
• Chrysler, GM, Mitsubishi & Dodge
• Supersedes 49500
MADE IN THE USA
SALE $111.00
CVT 38700
Long Reach Balancer / Pulley Installer
• An extra long reach tool kit
• Applications include Ford, GM, Dodge and Chrysler vehicles with V6 and V8 engines that have recessed threads for the crank pulley bolt or utilize an underdrive pulley or both.
SALE $75.25
CVT 38000
Ratcheting Harmonic Balancer Puller
• Three ratcheting legs with puller feet eliminate the need for bolts
• No need to remove radiator or other components with this compact design
• Legs quickly adjust and hold their position
• Push-turn-click design
SALE $87.75
LS 60050
Heavy-Duty Yoke Puller
• Used to Remove Commercial Heavy-Duty Yokes on Transmissions and Rear-End Differentials Without Damage to Yokes or Other Components.
• For use on yokes with a bearing diameter between 1-7/8" and 2-3/16". These yokes are commonly found on Class 6-8 trucks. Kit comes with strong, grade eight bolts. All components are heat-treated.
SALE $245.00
CVT 497
Heavy Duty Yoke Puller
• Fits on multiple Spicer full and half round yokes
• Fits on Meritor (Rockwell) RPL 20 & 25 series
• Manufactured from high grade steel
SALE $333.50
OT 7494A Rear Axle Bearing Puller Set
• For the removal of semi-floating rear axle bearings
• Includes three pullers: 1"–1-7/8", 1-5/16"–2-3/8", 1-3/8"–2-7/8"
• Caps Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics in 2003-2022 Cummins, 20012022 Duramax, and 2008-2022 Ford Engines.
• Helps in identification of faulty diesel fuel injectors and used to diagnose engine knock sounds.
MADE IN THE USA
SALE $90.00
LS 12090
5 Pc. Line Socket
• Designed to replace fuel line fittings without damage to fitting, fuel rail, and fuel line reducing the possibility of fuel leaks
• 3/8" drive with black oxide finish
• Works on American, Asian, & EURO Vehicles, Diesel and Gas
SALE $122.00
LS 12320
Line Sockets, 19mm & 22mm
• Designed to Replace Fuel Line Fittings on Cummins ISB and ISX engines.
• The 22mm is used on the newest ISX Cummins motors and the 19mm is found on 2011 and older diesel engines.
• Use with 3/8" square drive.
SALE $52.25
CTA 8857
10 Pc. Flare Nut Socket Set - EGT & Fuel Line
• Sockets for the installation and removal of injector lines & exhaust gas temperature (EGT) sensors without damaging connection wires, housing, sensors or threads
• Includes both offset and straight options for clearance issue
• Includes sizes: 13mm Straight/Offset – 3/8” Drive, 14mm Straight/Offset – 3/8” Drive, 17mm Straight/ Offset – 3/8” Drive, 19mm Straight/Offset – 1/2” Drive & 21mm Straight/Offset – 1/2” Drive. Open hex body for clearance (Wires, etc.)
SALE $214.25
lb Incremental dual dial for accurate and easy reading
TU-550 Master Fuel Injection Tester
• Covers
•
CTA 7058
6 Pc. Radiator Pressure Tester
Adapter Kit - USA/Asian Kit includes all metal construction cooling system testing adapters for US & Asian market vehicles
• Designed for the L5P Diesel engine with two tank caps
• Right hand thread (vented) / Left Hand thread top (included)
• Compare to GM factory tool GE-52098 & GE-52098-A
SALE $122.00
RDL 95-0700
SmartFit™ Universal Cooling System Test Kit
• All the tools needed to pressure test any cooling system
• Includes pressure pump and necessary adaptor housing MADE IN THE USA
SALE $195.50
FJC 43658
Radiator & Radiator
Cap Pressure Test Kit
ENGINE - COOLING SYSTEM
APT 78585
Radiator Pressure Tester & Vacuum Type Cooling System Refiller
• Pressure testing pump with hose, quick coupler with pressure release, and gauge: test range 0–35 psi
• 1 Pc. Each blue and black radiator cap test adapters
• 17 Pc. Test caps for most domestic and import vehicles
• Universal adapter and temperature gauge
SALE $363.25
MC 43301-A
27 Pc. Master Radiator Pressure Test Kit
• Vacuum type cooling system
• Purge and refill for quick change of coolant
• Test Range: 0 – 35 psi
• Includes thermometer, universal radiator cap, vacuum purge and refill tool, coolant hose and additional installation accessories
• Includes hand pump and 19 adapters to fit most popular domestic and import cars and trucks
SALE $359.00
MC 43302
25 Pc. Master Cooling System Pressure Test Kit
• Confirms radiator and cooling systems leaks
• Test radiator caps
SALE $229.00
• Combined capability in one tool
• Easily check status of Coolant, DEF and Battery Fluid
• Focusing eyepiece
• Includes plastic case, dropper, cleaning cloth, screwdriver and distilled water for calibration
• Knurled rubber grip
SALE $107.50
LS 60800
Heater Core Backflush Tool with Air
Adjustable Pressure Industrial Spray Gun with Air Adapter and a Stepped Tip Design for Easy Heater Core Flushing.
MADE IN THE USA
SALE $75.00
LS 88800
Radiator Genie Pro
• Interchangeable Heavy-Duty Cleaning Wands for Radiators and Other Hard-To-Reach Places
• Interchangeable 17" and 43" wands
• Use with Water or Air
• Includes M-style plug, or can be changed to any style plug, or it can be removed for use with a standard garden hose.
SALE $79.00
• Detects and exposes external system leaks
• Detects internal engine leaks
• Includes blue and black radiator cap test connectors
• Includes hand pump, thermometer and 21 adapters to fit most popular cars and trucks SALE $299.00
LS 88500
Radiator Genie - 22-3/4"
• Water and air cleaning wands for high efficiency cooling systems and all types of radiators
• For radiators and other hard-to-reach places
• Patented fan head
• Special sized tube to access confined areas
• So versatile, it can be used on a variety of machines that operate in dirty outdoor environments SALE $37.25
MC 43306
Heavy Duty Cooling System Pressure Test And Refill Kit
• Uses shop air to uphold continual pressure to the cooling system during testing and refill
• 4 quick disconnect vacuum attachments provide quick refilling of the cooling system and eradicates airlocks
• For use with Freightliner, International, Kenworth, Peterbilt, Mack, Volvo, GMC and Sterling cooling systems
SALE $469.00
MC 43012 Cooling System Vacuum Purge & Refill Kit
• Refill new coolant by creating a vacuum in the cooling system
• No need to undergo time-consuming air bleeding after refilling new coolant
• Sealing collar with three rubber bushings offers a wide variety of applications for radiator filler necks
SALE $109.00
UV 550000
AirLift™ Coolant Refill Service
• Refills entire cooling system in seconds, including the heater core
• Eliminate time consuming bleeding and purging
• Check for leaks while under vacuum
• OEM approved worldwide SALE $214.00
UV 550500 AirLift™ II
• Refills entire cooling system in seconds, including the heater core
• Eliminate time consuming bleeding and purging
MV MV4506
Universal Radiator Pressure Tester Adapter
• Scale range: 32°F to -60°F SALE $119.90 CT 3R401 Coolant/DEF/Battery Refractometer
• Check for leaks while under vacuum
• Push button valve eliminates the need to change hoses
• Works on all cooling systems with “Fits-All Cone Adapter”
SALE $142.00
RO 75134
Coolant Test Strips
• Bottle of 50 Strips
• Shows the freeze point and the pH
SALE $42.00
RO 75240
Coolant & Battery Refractometer
• For measuring the freezing point of either propylene or ethylene glycol based cooling systems
• Checks the strength of electrolyte solution batteries
• High-quality optics with ultra smooth focusing
CTA 9377
7 Pc. Terminal Tool Kit
• Designed to remove wiring from terminal blocks
• Features Fork-style and Deutsch disconnect tools
• Reduces risk of wire or terminal block damage
• Application chart for cross-referencing terminal brands
• Great for coolant sensors, wiring harnesses, and terminal blocks on modern vehicles
SALE $113.00
CTA 9812
26 Pc. Terminal Tool Kit
• High quality steel
• For both import and domestic vehicles and trucks, plus special tools for coolant sensors, wiring harnesses and terminal blocks on most modern vehicles
SALE $163.25
TX 483
Deutsch Terminal Removal Tool Kit
• Works on Deutsch HD10, HD20 and HD30 Series connectors, plus Deutsch Jiffy Splices.
• Fits wire sizes: 4, 8, 12, 14, 16 and 20 gauge
SALE $38.00
LS 20580
Inline Spark Tester With Coil-On-Plug Wire
• Gives a Visual Check of Spark Energy for CoilOn-Plug or Standard Ignition Systems.
SG 18550
Deutsch Terminals Release Tool Kit
• Use to release Deutsch terminals from connectors
• Coverage in 3 wire gage ranges: 14–16, 16–18 and 20–24
• All metal construction with knurled anodized aluminum handles and stainless steel shafts
SALE $55.50
SG 18700
11 Pc. Master Terminals
Service Kit
• Crimp and release the most popular automotive specialized terminals
• For use on Deutsch open and closed barrel terminals, Weather Pack terminals, Metri-Pack terminals, and other open barrel terminals
SALE $285.25
SG 36350 Ignition Test Kit
• Includes in-line spark checker kit for recessed plugs
• 8 Noid Lights for checking GM PFI, Ford TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, BOSCH 2 and GM MULTEC 2
• 2 IAC Test Lights for straight and 90° applications
SALE $98.00
SG 23970 In Line Spark Checker For Recessed Plugs
• Provides information not available with OBD II code reading devices
• Troubleshoots all domestic and imports, SUVs and trucks
• Short wire is double ended to offer a straight boot and a 90º boot on one tool
• The additional 7" extension plug wire is used on coil-on-plugs
MADE IN THE USA
SALE $28.00
STL 95978
19 Pc. Master
Terminal Tool Kit
Latest tools for new Volkswagen and Audi vehicles, plus special tools for coolant sensors, wiring harnesses and terminal blocks on Chrysler, Hyundai, KIA, Mitsubishi and most other modern vehicles
SALE $116.25
LS 57750
Wire Terminal Tool Kit
• For removing wires from terminals without damage
• Works on conventional terminals as well as Pack-Con and Weather-Pack terminals found on many GM vehicles
• The handle slips over the probes to provide extra leverage MADE IN THE USA
SALE $60.00
140 2 Pc. Easy Access Kit • With Inflate-A-Wedge
• Collapses for
•
•
LS 41450
Intermediate Pitman Arm Puller
• Works on pitman arms on medium duty trucks and other vehicles with pitman arms held on with a nut
• For impact use
SALE $128.00
LS 41490
Pitman Arm Puller for M100 Sheppard
• Works on Sheppard M100 steering gears found on many Class 6-8 vehicles
• For impact use
SALE $85.00
LS 41610
Pitman Arm Puller for M110 Sheppard
• Works on Sheppard M110 steering gears found on many Class 6-8 vehicles
• For impact use.
SALE $197.00
• Constructed of high-strength materials for increased pulling power and superior durability
• Rated for usage with up to a 3/4" drive impact wrench
• Simple and effective design with a wide application range SALE $106.00
SPI 11880A
HD Pitman Arm Popper
• Use for Pitman Arms on 3/4 to 1 ton pickup trucks
• Ford F250/350/450/550
• Dodge/Ram 2500/3500/4500/5500
• Chevrolet/GMC 2500/3500
SALE $490.25
SPI 19880
Medium Duty Pitman Arm Popper
• Patented leverage action requires less torque and space compared to other pitman arm tools
• Accommodates pitman arms that are 3" wide
• Low clearance design works on steering gear mounted in the vehicle to save time
SALE $442.25
UNDERCAR - SUSPENSION
MAY 29912
3 Pc. Interchangeable Tie Rod Kit
• Covers the widest range of tie rods
• Change cages with no additional tools
SALE $331.60
• The 20% thicker fork design provides extra lift
• Includes: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8".
LS 58100
12 Pc. Inner Tie Rod Tool Set
• Improved socket design to work on longer applications
• The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation of tie rods with inaccessible wrench flats
MADE IN THE USA
SALE $205.00
LS 45750 Inner Tie Rod Tool
MADE IN THE USA
SALE $102.25
LS 41630
21mm/24mm Caster Camber Kit for GM
• The 14-1/2" 21mm/24mm Wrench can be Used to Move Hard-to-Reach and Often Rusty OEM Cams on 1999 and Newer GM 1/2 and 3/4 Ton Vehicles with Coil Spring Front Suspensions.
• The kit includes a cam adjusting holding tool to adjust the upper control arm cams
MADE IN THE USA
SALE $44.00
LS 29090
Truck Anchor Pin Bushing Driver, 2 Pc.
• Removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins
• Includes an 11-1/2" long driver
• Double-sided cone snaps onto driver to drive out and install bushings
• Use flanged end to install and tapered end to remove
• Also removes truck leaf spring bushings
MADE IN THE USA
SALE $82.00
• Threaded to interchange with either the handle for hammering or the pneumatic driver (.401 Shank) and a 6-1/4" extension that works with either handle to provide extra reach.
MADE IN THE USA
SALE $159.00
LS 41440 5 Pc. Stepped Pickle Fork Kit
• Step design on the forks keeps the tool from bouncing
• Includes (5) forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8"
• The forks are threaded to interchange with either the handle or the pneumatic driver
MADE IN THE USA
SALE $129.00
LS 41500 Pickle Fork Kit
• For separating ball joints, tie rods, pitman arms and other uses
• Includes manual and power handles MADE IN THE USA
SALE $59.50
• Accommodates 1/2" drive ratchet or breaker bar SALE $52.00 CVT 18620 Sheppard M100 Pitman Arm Puller
CTA 3802
Lower Control Arm Pulling Tool
• Used for installing a ball joint on a lower control arm
• Eliminates the need for an extra pair of hands
SALE $19.70
STK 71410 Axle Popper
• Pops Half Shafts Loose From Engine
• Shim included to fill larger gap found on some vehicles
• Applies even pressure to both sides of shaft
SALE $84.00
APT 7802
5 Pc. Tie Rod/Pitman Arm Adjusting Tool Set
• Special tool design facilitates 360° sleeve in tight areas
APT 78914
Lower Control Arm 4' Pry Bar
• Aids in getting ball-joints free from knuckles
• Keeps control arms out of the way to service axles, knuckles, front & rear struts & more
• Provides the muscle needed to fight against bushing pre-load & anti-sway bar tension
• Use leverage to pull down on & free lower control arms & double wishbone suspension
SALE $76.25
CVT 91300
Floor Mounted 2,200
LB. Strut Compressor
• 19" Max spring height
• Adaptive spring bracket for multiple configurations
• Can be used with varying sizes of struts with coils up to 5/8" diameter
• Ideal for passenger vehicles and light-trucks
• Designed for easy, one-person use
FREIGHT SALE $439.00
OT 6637-ST
Strut Tamer II Extreme with Stand
• Meets the new ASME PASE safety standards for spring compressors and is capable of safely compressing the largest strut springs.
• 5/8” Compression arms for superior strength, stability and safety
• Locking trunions for optimal stability
• New arm-locking rings eliminate the need for tools to adjust
MADE IN THE USA
SHIPS MOTOR FREIGHT
SALE $2,641.90
UNDERCAR - SUSPENSION
OT 6530
Ball Joint Super Set
Allows for the removal and installation of press-fit ball joints
SALE $673.60
OT 7249
Ball Joint Service Kit
• Easily removes and installs press fit upper and lower ball joints
• Includes tools for complete ball joint, U-Joint and heavy duty truck brake anchor pin service jobs.
• In blow molded plastic case
MADE IN THE USA
SALE $271.20
OT 6297
Ball Joint Separator
Works on many domestic and import front wheel drive vehicles, and is adjustable up to 2" for different size ball joints.
SALE $86.00
CVT 197
Ball Joint Master Set
• Allows for the removal and installation of press-fit ball joints
• C-frame tool can be used alone to remove and replace universal joints
SALE $385.50
APT 7897
Ball Joint Service Tool & Master Adapter Set
Includes C-frame press, receiving tubes and removing/installing adapters for working on press-fit upper and lower ball joints
SALE $197.00
OT 5038
Brake Anchor Pin & Bushing Service Set
• Special tooling and our C-frame press get you past the hub assembly, so you can do the job quickly and professionally without damaging other parts.
• Includes everything needed for removal and replacement MADE IN THE USA
SALE $538.90 OT 6494
Clamshell Strut Spring Compressor
• Safety locking pins hold the compressor jaws in place
• Tool compresses springs of 4" to 9" O.D., with wire diameters of 7/16" to 11/16"
• Built to use with an impact wrench MADE IN THE USA SALE $446.90
SPI 20300
1-1/8" Spline Drive
Crowfoot Suspension Wrench
• For Class 7 and 8 commercial trucks, such as Kenworth, Peterbilt and International
• Designed for use in situations where traditional wrenches or sockets cannot provide access
SALE $65.25
OT CA6630
Ball Joint Connected
Adapter Professional Kit
• Spring-loaded stainless steel ball bearings to securely attach all cups and adapters to the C-frame
• Works with most OTC ball joint kits, cups and adapters
• Locking cups and adapters set up faster
• For R&I of ball joints, U-joints, wheel studs and more
• Includes 25 cups and adapters for work on more than 600 vehicle models, 76% more vehicle models than the competition
MADE IN THE USA
SALE $2,069.60
OT 6295
Front End Service Set
Includes: (2) Pitman arm pullers (for large or small ball joint applications), (2) ball joint separators and (3) different tie rod pullers
SALE $250.70
APT 78197
Goliath Ball Joint Service Tool & Master Adapter Set
• Astro’s latest large forged alloy C frame press with industry leading strength and both a wider opening and longer arms to more easily fit adapters
• Includes all the receiver tubes and removing/installing adapters
SALE $255.00
AST TM218
8 Pc. Ball Join Hammer Nut Set
• M10×1.5, M12×1.25, M12×1.5, M14×1.5, M14×2.0, M16×1.5, M16×2.0 and M24×1.5
• Used for breaking free steering knuckle/ suspension joints using an impact hammer
• Also can be used to remove Honda, Lexus and Toyota wheel studs
SALE $165.00
SPI 18100
High Pressure
Ball Joint Press
• 9 Cup sizes for most pick-up applications
• Removes and installs ball joints with prefitted straight grease fittings
• Provides ample clearance to service ball joints on the vehicle
• Large diameter, coarse thread jack screw
• Proprietary design keeps cups locked in place during use
SALE $1,171.75
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MLK 905 022
Uni-Hook-Kit
• For universal applications as brake caliper, cables, hoses etc.
• Hooks are bendable
SALE $16.10
MLK 905 024
Uni-Hook Kit, Solid
• Durable and non flexible
• Spring steel core with rubber coating
• Allows you to hang larger and heavier brake calipers
SALE $16.10
MLK 905 023
4 Pc. Uni-Hook Kit
• (2) Flexible Uni Hooks (905 022)
• (2) Rigid Uni-Hooks (905 024) SALE $28.40
TTN 51600
Brake Caliper Hanger Set
• 1/4" Heavy-duty steel
• Hi-visibility powder coated finish
• Perfect for a variety of automotive applications such as brakes, wheel bearings, axel shafts and suspension
SALE $5.99
LS 29120
11 Pt. Truck Brake Caliper Socket
• For air disc brake caliper adjustment
• Works on Bendiz ABD 22X, ADB 225, SN6, SN7, SK7 air disc brake calipers
SALE $10.75
13410 Brake Caliper Brush
and
TTN 51499 3 Pc. Brake Caliper Brush Set
CTA 9375
Brake Caliper File - 4-Sided
• Designed to remove dust, rust and dirt from the brake caliper bracket
• 9mm width per side. OAL: 10.65"
$43.50 TTN 51772 2 Pc. Flexible Hanger Set
• Flexible hangers are pliable for bending and maneuvering
• Can retain shape
LS 48020
2 Pc. Brake Caliper Hanger Set
• Overall length of 9” for hanging the disc brake caliper out of the way while keeping tension off the brake line.
• Set of two hangers.
MADE IN THE USA SALE $9.65
•
•
•
Brake Caliper Files
Brake caliper file with scraper on the face end, or removal of coarse residue
LNG 277 Brake Caliper Press
• Works on small & medium single piston brake calipers found in subcompact to midsize vehicles
• Size range 0.95"–2.25"
SALE $67.00
LNG 279-5420
4-in-1 Brake Caliper Spreader
• Works on twin and quad piston calipers, as well as single and twin piston floating calipers
• Centrally located ratchet evenly spreads force in a parallel manner
• Extended reversing lever allows for easy change
SALE $77.00
SX 3930
Brake Caliper Tool Set
• Caliper adapters (1-3/16"–2-1/2")
• Adapters designed for Nissan, Saab, and Honda
• Contains a caliper rotation tool with left hand threads
SALE $100.50
•
•
UNDERCAR - BRAKES
Bleed / Refiller Kit
• Large Capacity 1.8 Liter
• Operates with compressed air
• Includes: automatic master cylinder refill kit with 40 oz reservoir, 6' bleed hose, master cylinder evac hose, hanging hook, bleed adapters, MV MV6830 and MV MVA6832
•
UltraBEND® Brake Line Tubing
CTA 8854
EV Brake Bleeding Kit
• Comprehensive three piece brake bleeder tank and adapter set for EV specific applications
• Services various EV models, including Tesla Model X, S, 3, and Y
• 7015 features a 3-liter tank, pressure release valve, 0-70 PSI gauge, and 10-foot hose with quick-disconnect coupler
• 3938 and 3939 adapters
SALE $236.00
VIM BB500
Brake Bleeder Wrench Set
• 7mm, 8mm, 9mm, 10mm & 11mm Hex
• Double bends for easy access
• Limited lifetime warranty SALE $65.25
CTA 4302
Air-Powered Brake
Caliper Wind Back Tool Kit
• Engineered for swift and energy-efficient disc brake servicing, reducing downtime, Dual-directional functionality caters to both regular and reverse-threaded pistons
• Comprehensive pneumatic kit includes 22 adapters
SALE $247.50
LNG 4651
Automatic Slack Adjuster
Release Tool & Wrench
• Fork-end tool to release the tensioner button, and a 5/16" double square offset reversible wrench with E-Z Grip handle
• Release the anti-reverse mechanism without prying
• Apply more turning power with less fatigue to the hand
SALE $67.00
LNG 7578
7/16" Automatic Slack Adjuster Wrench
Used for brake adjustment on heavy-duty trucks equipped with Haldex slack adjusters
SALE $36.00
TTN 85512
2 Pc. Slack Adjusting Tool & Wrench
• Speed up installation and service on Meritor brake slack adjusters
• 5/16" Double square ratchet has an angled head
• Side-mounted forward/reverse lever
• Fork-end release tool holds tensioner release button securely without prying or damage
SALE $35.49
TTN 85511
7/16" XL Slack Adjusting Wrench
• Speed up installation on Haldex heavyduty truck brake slack adjusters
• Deep reaching 7/16" hex
• Built-in ratcheting mechanism has full 360º swing
• Overall Length: 14.75"
SALE $32.49
MV MV6830
Vacuum Brake Bleeder
- Less Refiller Kit
SALE $239.00
• Compact 1.3-quart capacity reservoir
• Automatic shutoff prevents overfill
• Pushes new fluid down through the master cylinder to flush air and old fluid out through the bleed screws
• Conveniently located ON/OFF and flow control valve
• Isolated flow control and pressure /vacuum switch
• Redundant pressure control systems
SALE $507.75
MV MV7135
Vacuum Brake Bleed Kit, 2.5L
• Utilizes compressed air to produce vacuum and pressure
• Includes accessories for extracting used brake fluid while refilling with new
• Used or new fluids are dispensed by switching from vacuum to pressure
• Isolated flow control and pressure / vacuum switch
• Redundant pressure control systems
SALE $155.00
MV MV6840
Pressure Bleeding System for Hydraulic Brake/Clutch Systems
SALE $507.75
SG 65300
In-Line Brake Pad Gauge
• Use without removing the wheels on many vehicles
• Measure internal and external brake pads
• Calibrated for 6mm backing plate
• Gauge scale is in metric
SALE $27.50
MT 941
Pencil Style Brake Pad Gauge, -0 to 20 mm
Measure external & internal brake pad lining without removing any components or wheels SALE $30.00
MT 942
8 Pc. Manual Brake Pad Gauge Metric/SAE Tool Set, -2mm to 12mm
SALE $17.00
LS 81850
9 Pc. Combination Brake Lining Thickness Gauge Set MADE IN THE USA
SALE $20.00
CTA 8858
Brake Thickness Gauge - Truck
• Designed to read brake lining between the pad and rotor
• Provides range to meet both SAE and Metric industry recommendations, ensuring accuracy in every use
• Bright blue plastic finish enhances visibility, making measurement readings easy even in low light
• Nine commercial truck sizes ranging from 6mm (0.2362”) to 22mm (0.8661”)
SALE $23.50
LTI 895
Eaton Truck Brake Spring Tool
• Easily installs Eaton air brake shoe anchor springs
• Universal fit for all Eaton air brake shoe anchor springs
SALE $62.00
LTI 890
Truck Brake Spring Tool
• Easily connects rear drum brake return springs
• Slotted ends on tool always hold spring at correct angle
• No need to leverage tool against a solid surface SALE $62.00
LS 31550
1/2" Dr. Axle Hub Bridge Nut Socket for GM
• Removes and installs the hub bearing retaining nut found on some GM GMT900 platform trucks.
• Socket has (9) drive pins to fit the new style retaining nut found on 2-wheel and 4-wheel drive Cheyenne, Silverado, Escalade, Sierra and Avalanche trucks with 10.5" or 11.5" ring gear.
SALE $59.50
LS 24300
Speedy Brake Pad Spreader
Compress Brake Pistons in Seconds
MADE IN THE USA
SALE $55.00
LS 25750
Dual Piston Brake Pad Spreader
Compresses Dual Brake Pistons Simultaneously
MADE IN THE USA
SALE $66.00
OT 5081
S-Cam Air Brake Spring Tool
Replace brake shoes on heavy-duty tractors and trailers
MADE IN THE USA
SALE $109.95
LS 31510
Axle Nut Socket, 9 Pin For GM
• Used to Remove and Install the Hub Nut on 2020 and Newer Silverado and Sierra 2500/3500 Trucks With 11.5" and 12" Dual Rear Wheel Axle Hubs.
• May work on other vehicles with 2.97" O.D. Axle nut
SALE $35.00
LS 40030
Brake Spring Bar
Replaces brake shoes on heavy-duty tractor and trailer s-cam brakes
MADE IN THE USA
SALE $35.75
LS 39770 Brake Spring Form
• Easily Removes and Replaces the S-Cam Return Spring
• The tip cradles the return spring to keep it from sliding off MADE IN THE USA
SALE $35.75
LS 41840
Slack Adjuster Rod Pin Press
• Spring-Loaded Plunger Automatically Centers the Press on the Slack Adjuster Rod Clevis Pin, For Easy Removal.
• Designed to shear off the cotter pin, or the cotter pin can be ground off. Works on most models of automatic slack adjuster rod pins found on class 6-8 trucks and equipment.
SALE $80.00
LS 41850
Brake Clevis Pin Press
• Spring-Loaded Plunger Automatically Centers the Press on the Brake Clevis Pin, for Easy Removal
• Tool is designed to shear off the cotter pin, or the cotter pin can be ground off. Works on most models of automatic slack adjuster rod pins found on class 6-8 trucks and equipment
SALE $107.00
CVT 70100
Brake Anchor Pin Press
• Remove brake anchor pins and bushings on 16-1/2" S-cam brakes
• 10-ton capacity C-frame
LS 31520
Axle Nut Socket, 12 Pin for Dodge
• Used to Remove and Install the Hub Bearing Retaining Nut On 2019 and Newer Ram 3500, 4500 and 5500 Heavy Duty Trucks with 12" Axles.
• May work on other vehicles with 3.125" O.D. Axle nut
SALE $49.00
CTA 1083
Ford Transit Rear Hub Nut Socket
• Heavy-Duty 4 point specialized impact socket for removing the rear hub nut on RWD Ford Transit
• The alignment shaft allows accurate placement onto the castle nut
• Services 2014 & up Ford Transit vehicles
• Comparable to Ford Factory Tool #205-1007
SALE $77.50
AST 3AXHN
3 Pc. Axle Hammer Nut Set
• For breaking free axle shaft using an impact hammer
• Nut must be threaded all the way onto the axle shaft threads to prevent damage
• Custom metal case
SALE $77.00
• For use with a 1/2" drive impact SALE $175.00 LTI 830A
•
•
SALE $189.00
VIM SBP1
Screw-on Bearing Packer SALE $67.00
CVT 904
Wheel Bearing
Remover/Install Kit
• Replace wheel bearings while keeping the steering knuckle and strut assembly intact, eliminating the need for front end alignment once the work is done.
• For front wheel drive cars and light trucks.
SALE $169.43
8 Pc. 12 Pt. Metric Axle
•
CVT 94000 Hub Wheel Bearing Master Set
• Each puller leg quickly and effortlessly adjusts for various fitments and has locking pins to hold their position
• Use on the vehicle without the need of removing various steering and suspension components
• Eliminates the need for post-repair alignments and replaces a shop press
• Use to remove brake drums and rotors
SALE $621.75
APT 78825HD
Heavy-Duty Grade 9 Master FWD Bearing Adapter with Thrust Bearing
• Includes forged cups and adapters and instead of traditional washers, a 7/8" HD thrust bearing originally designed for use on 18-wheelers
• Includes: 65, 80, 100, 120 and 140 lb torque extensions SALE $165.00
TTN 23137
1/2" Drive Digital Torque Wrench
• 3 torque value indicators, a buzzer, vibrating alarm, and red LED warning light
• Five torque unit options available: Kg-cm, Kg-m, Ft-lb, In-lb, and N-m
• Displays the percentage of preset torque value achieved
• White LED backlit display for clear and easy reading
• 72 tooth reversible ratchet head with quick release
• Ergonomic handle with rubber grip SALE $169.00
FOW 74-422-450-1
Mini-Mag Protractor
• Provides instant 360° digital inclination display of any angle with embedded magnets on both sides and the bottom making it ideal for a variety of measurements.
• Display inverts for easy reading
• Resolution: .05°
• Accuracy: ±.2°
• Hold feature SALE $85.00
TX 967
Tire Wrench Support Stand
• This steel support stand boasts multiple support points
• 29.5", provides ample clearance for various vehicles
• A reliable aid for basic application (lug nuts) to working on harmonic balancers
• Accepts wrenches or extensions up to 1-1/4" in diameter
Torque Limiting Aluminum Extension Set
• Accurately torque wheel nuts to recommended torque
SX 2450 5
•
PER M208
Torque Multiplier Lug Nut Tool
• 1" square drive input, 1:58 gear ratio produces 2350ft. lbs. 3200 nm pounds of torque
• 180° Folding design, 150 lumen top light, base magnet, dual handle magnets, base hook and charge level indicator lights.
• 720 lumen adjustable COB LED light with top flashlight and new XL 3,350mAh battery with USB-C 2X quick charging
• Lasts 3.5hrs on high, 8hrs at 50%, 2.5hr charge time with green LED’s on side of light body indicating current charge level while in use
• Button switch on rear of light for both light sources with adjustable recessed thumb wheel on side for 60-720 lumens from the main light
• Steel ball swivel base with 20lb magnet and ratcheting extendable base hook SALE $78.75
APT 90SLC
900 Lumen Wirelessly Recharge LED Slim Light with Top Flashlight & USB-C Dual Wireless Quick Charge Pad
• Adjustable output magnetic swivel base slim light with press and hold dimming function, 70-900 lumens of output & 150lm top light
• Includes USB-C style charging cable and adapter or charge wirelessly with dual charging pad
• Stainless steel base hook, powerful 20lb magnetic swivel base, charge level indicator lights and chemical resistant nylon body
SALE $106.50
• 3" x 4.3" worklight with LED spot
•
• Base magnets and hook for mounting
• Includes wall adapter and USB-C cable
APT 90SL
900 LM Wirelessly Rechargeable LED Slim Light with Top Flashlight
• Includes USB-C style charging cable
• Stainless steel base hook, powerful 20lb magnetic swivel base, charge level indicator lights and chemical resistant nylon body
• Modes include Turbo (double press) for 900lm, press and hold to adjust from low to high for 70-720 lumen, press again for 150 lumen top flashlight.
SALE $80.50
NEW
APT 52SLMAX
750x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light
• Includes USB-A to USB-C charging cable and wall adapter
• New larger capacity twin battery cells for 5,200mAh and 750 lumens out either main lights, or turn both front and back on for a 1200 lumen+ area light
• New chemical resistant impact nylon body with more durable longer lasting folding joint
• Adjustable dimming feature
• 180° folding design, 150 lumen top flashlight, new 20lb base magnet, dual handle magnets, base hook and charge level indicator lights
