bloc-carlig-macara-mckissick by Total Race

MckBlk_1012.fm Page 25 Saturday, February 4, 2006 2:56 PM

McKissick® Blocks ®

k c i s s i K c M

McKissick Blocks

s k c o l B

259

Snatch_C&E.fm Page 58 Friday, February 3, 2006 3:18 PM

McKissick & Lebus Snatch Blocks What It Takes To Be 418

“Crosby Or Equal” COMPETITION

DESIGN The theoretical reserve capability of a snatch block should be at least 4 to 1. Known as the DESIGN FACTOR, it is usually computed by dividing the ultimate load by the working load limit. The ultimate load is the average load or force at which the block fails or no longer supports the load. The working load limit is the maximum mass or force which the product is authorized to support in general service. The design factor is generally expressed as a ratio such as 4 to 1. Also important in the design of snatch blocks is the selection of proper steel used in components and consideration as to fatigue life.

Ask: Are their snatch blocks metric rated?

END FITTING CONNECTIONS

Ask: Are the end fittings forged, quenched and tempered?

Interchangeability of end fittings is important, and should be easily achieved without disassembly of the block. It is also important that end fittings are quenched and tempered in order to reduce the risk of brittle, catastrophic failure.

BLOCK CONSTRUCTION The block performance depends greatly on the sheave and block construction. All steel construction, including side plates, pins, and sheaves is desirable. Bronze bushings are recommended for slow line speeds and frequent use. Roller bearings are recommended for faster line speeds and more frequent use at greater loads. The ability to individually lubricate all sheaves is essential. Secondary securement of bolt connecting the end fitting to the block is recommended.

Ask: What is the metric design factor? Ask: Are their snatch blocks fatigue rated?

L-170 CROSBY

McKissick and Lebus snatch blocks are dual rated with a design factor of 4 to 1 for metric and 4.5 to 1 in short tons. McKissick and Lebus snatch blocks incorporate the proper selection of steel and are also fatigue rated.

Most do not provide metric ratings with a design factor of 4 to 1, nor fatigue rated snatch blocks.

McKissick and Lebus snatch blocks use genuine Crosby forged, quenched and tempered hooks and shackles.

Ask: Are the end fittings inter-changeable?

Ask: Are their blocks all steel construction? Ask: Do their blocks have secondary securement of the pins?

McKissick and Lebus snatch blocks are of “all steel” construction. They also have a secondary end fitting securement system. In addition, sheaves are individually lubricated.

Ask: Are all sheaves individually lubricated?

FULL LINE IDENTIFICATION

Ask: Do they have a full range of snatch blocks?

STANDARDS ORGANIZATION

Ask: Are they API Q1 certified?

All snatch blocks utilized in the oilfield should be manufactured by a source that is both API Q1 and ISO 9001 certified.

Ask: Are they ISO 9001 certified?

APPLICATION INFORMATION

Ask: Does each snatch block have the Crosby provides detailed application and application and warning information attached warning information attached to each to it? snatch block.

McKissick and Lebus provide the most complete line of snatch blocks in the industry. All McKissick and Lebus snatch The availability of a full range of snatch blocks is Ask: Are their snatch blocks properly marked blocks are identified by type, size of block, essential to insure that the appropriate block is size of wire line to be used, working load with critical information? available for a specific application. All snatch blocks limit (in both metric and short tons), and must be identified by type, size of block, size of wire line the manufacturer’s name boldly marked to be used, working load limit, and the manufacturer’s Most competitors do not have the full name boldly marked on the product. range of snatch blocks that Crosby offers. on the product.

Detailed application information will assist you in the proper selection of snatch blocks. This information is most effective when provided at the point of application, as well as in supporting brochures and engineering information. A formal application and warning system that attracts the attention of the user, clearly informs the user of the factors involved in the task, and informs the user with the proper application procedures is needed.

260

Crosby’s McKissick plant is API Q1 certified. McKissick is also certified to ISO 9001 standards by Det Norske Veritas (DNV).

Most competitors are not API Q1 certified or ISO 9001 certified.

Most competitors do not have application and warning infomation with each snatch block.

Snatch_C&E.fm Page 59 Friday, February 3, 2006 3:19 PM

Crosby Value Added Dual rated: To meet the requirements of both short tons and metric tons. Metric rating: McKissick and Lebus snatch blocks are metric rated to a design factor of 4 to 1. Since they are metric rated, with a world class design, they are applicable to worldwide use without conversion. U.S. rating: When compared to other blocks which are rated in short tons, the design factor of McKissick and Lebus snatch blocks are 4.5 to 1. Fatigue properties: McKissick and Lebus snatch blocks are fatigue rated. The blocks are designed to meet specific fatigue performance levels. They meet the requirements for the new Euronorm Standards: 20,000 cycles at 1-1/2 times the Working Load Limit. Latch Kits: McKissick and Lebus snatch blocks, utilizing a hook as an end fitting connection, can be equipped with latches. Application information: Application and warning information for tackle block systems is attached directly to each block. In addition, each block has a product warning sticker attached directly to it for the purpose of giving specific warning instructions about the block. Lock nut: McKissick snatch blocks have a special high performance lock nut on the nonmoveable side plate for securing the sheave pin. Sheave and wire line: Sheaves for McKissick and Lebus snatch blocks have a machine formed groove. Secondary Securement Systems: McKissick and Lebus snatch blocks are designed to incorporate a secondary securement system which retains the end fitting connection bolt when the block is in the closed position. In addition, a patented system retains the end fitting connection bolt when the block is in the open position, thus eliminating the loss of block parts.

Tailboard 404

with Hook 418

with Shackle 419

261

Block_order.fm Page 25 Friday, February 3, 2006 3:21 PM

Ordering Instructions BLOCKS The following information should be specified: 1. Stock number (if known) 2. Sheave Size 3. Block Number (Catalog number) 4. Number of Sheaves 5. Type of Bearings: (BB) Bronze Bushed, (RB) Roller, (TB) Tapered Roller 6. Type of Hook or Shackle 7. Wire Rope Diameter All crane and some construction blocks are available as shown or with swivel shackle assembly, duplex swivel hook assembly or quadruple hook assembly (as illustrated on page 263). Various combinations of bearing assemblies can be furnished; such as bronze bushed sheaves and swivel hooks, roller or tapered roller bearing sheaves and hook assemblies or a combination of bronze, roller or tapered roller bearings. EXAMPLE: 18” 380 Series, Triple Sheave, Roller Bearing Crane Block with Roller Bearing Swivel Hook, 60 ton, light weight, 1” wire rope diameter. Model Number M60T18L, Stock Number 2012187

SHEAVES The following information should be specified: 1. Stock number (if known) 2. Sheave O.D. 3. Bearing Type or Plain Bore 4. Shaft or Bore Size 5. Hub Width 6. Rim Width 7. Wire Rope Size 8. Special Machine Features 9. Special Finishes Alemite lubrication through the hub of the sheaves can be installed on special order. If hub or rim dimensions necessitate a dimension other than those shown in this catalog, please contact: The Crosby Group, Inc. for minimums and maximums. Tapered roller bearing sheaves show width over bearing cones, which cannot be altered. Price and delivery for your special needs, if not shown, are available upon request. U.S.A. The Crosby Group, Inc. P.O. Box 3128 Tulsa, Ok. 74101-3128 (918) 834-4611 Fax (918) 832-0940 www.thecrosbygroup.com crosbygroup@thecrosbygroup.com

262

CANADA Crosby Canada 145 Heart Lake Road Brampton, Ontario Canada L6W 3K3 (905) 451-9261 Fax (877) 260-5106 www.crosby.ca sales@crosby.ca

EUROPE N.V. Crosby Europe Leuvensebaan 51 2580 Putte, Belgium 32-15-757125 Fax 32-15-753764 sales@crosbyeu.com

Const_Crane.fm Page 25 Friday, February 3, 2006 3:28 PM

Construction and Crane Blocks Some of the most important considerations in your block requirements are: AVAILABLE BEARING TYPES • • •

Bronze Bushed—S.A.E. 660 bronze with figure “8” oil groove (See Fig. B-1). Double row sealed tapered roller bearing (See Fig. T-1). Straight roller bearing (See Fig. R-1). Fig. B-1

Fig. R-1

Fig. T-1

THE SHEAVE Note the groove form with proper line support and gently rounded lips to prevent line chafing when fleet angles etc. are present. Note the groove is completely machined to proper line size. Note the dense martensitic structure clearly outlined by the etch. This flame hardened surface in the wear area of the sheave always presents a smooth, uncorrugated, proper size groove face to the line. Sheaves 14" (356mm) diameter and over are flame hardened in groove to minimum 35 Rockwell “C”. Smaller sheaves can be flame hardened on special order. Unretouched photograph of a section cut from a flame hardened McKissick sheave (etched 2-1/2 Minutes) (NH4)2S408).

AVAILABLE CONNECTIONS

ALL CRANE AND CONSTRUCTION BLOCKS CAN BE FURNISHED WITH: Single hook in capacities to Duplex swivel hook in stand- Quad swivel hook from 200 Swivel shackle, in selected 300 tonnes (See page 362). ard capacities to 1,000 tonnes. tonnes and larger. capacities, with bronze thrust Larger sizes available or roller thrust bearing. (See page 364).

263

McKissick® Utility Crane Blocks 380 Series Hook Blocks

SEE APPLICATION AND

• Wide range of product available. • Sheaves lubrication through center pin - separate lube WARNING INFORMATION channel to each bearing. • Capacity: 4,5 to 270 t - Larger Models Available. Para Español: www.thecrosbygroup.com On Pages 312 - 319 • Sheave fully protected by side plates. • Sheave Sizes: 254 - 762 mm. • Dual action hook (swings and rotates). • Wire Line Sizes: 11 - 35 mm. • Repair parts available through world wide distribution • Manufactured by an ISO 9001 and API Q1 certified facility. network. • All single point shank hooks are genuine Crosby®, • Design Factor of 4 to 1 (unless otherwise noted). forged alloy steel, Quenched and Tempered, and have the patented QUIC-CHECK® markings (Duplex hooks • All 380 blocks, 406 mm and larger, are furnished with are available on all sizes). McKissick® Roll-ForgedTM sheaves with flame hardened grooves. • All 380 Blocks are furnished standard with Roller Bearings. • “Look for the Orange Hook . . . the mark of genuine • Reeving Guide Standard - All Models. McKissick® quality”. • Blocks thru 25 tons use 319N style hooks with S-4320 latches.

SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

On Pages 332 - 339

OPTIONS AVAILABLE • • • • • • •

Bronze Bushed Sheaves Duplex Hooks Swivel Tee and Shackle Assemblies Sheave Shrouds Anti Rotation - Locking Device (75 tons & larger) Plate Steel Cheek Weights Third party testing with Certification available upon request.

Dead End Chart (Double, Triple, & Quad Sheave Blocks*) Dimensions (mm) Wire Rope Size (mm)

Recommended Wedge Socket McKissick® US-422 /US-422T Utility Socket

T Thickness

U Hole Diameter

Stock No.

Size

25.4

32.5

1044309+

US4 11

25.4

32.5

1044318+

US4 13

25.4

32.5

1044336+

US5 14

25.4

32.5

1044345+

US5 16

31.8

42.2

1044363+

US6 19

31.8

42.2

1038580+

US7 22

31.8

42.2

1044417+

US8 25

44.5

65.0

1044426+

US10 28

44.5

65.0

1044435+

US10 32

* To find Dead End Dimensions for Single Sheave blocks, refer to table on pages 267. + US-422T Terminator Style.

264

380_block.fm Page 29 Friday, February 3, 2006 3:34 PM

McKissick® Utility Crane Blocks 381 - SINGLE

382 - DOUBLE

383 - TRIPLE

384 - QUAD

Thickness (E) shown is for blocks containing cheek weights (Light Medium - LM, Medium - M, and Heavy - H). The thickness (E) for non weighted blocks (Light - L) is measured over side plates.

265

380_block.fm Page 28 Friday, February 3, 2006 3:34 PM

McKissick® Utility Crane Blocks 385 - QUINTUPLE

386 - SEXTUPLE

387 - SEPTUPLE

388 - OCTUPLE

Thickness (E) shown is for blocks containing cheek weights (Light Medium - LM, Medium - M, and Heavy - H). The thickness (E) for non weighted blocks (Light - L) is measured over side plates. 266

McKissick® 380 Series Crane Blocks s k c o l B

e n a r C

s e i r e S

0 8 3

k c i s s i K c M

380 Series Crane Blocks • Specify Wire Line size when ordering. For standard wire line sizes, see Table 1. Working A Load Overall Limit Length (t) † (mm)

B E Net Length Thickness (mm) (mm)

Model No. M5S10L M5S10M M5S12L M5S12M M5S12H M5D10L M5D10M

2011004 2011013 2011022 2011031 2011036 2011037 2011038

4.5 4.5 4.5 4.5 4.5 4.5 4.5

788 788 835 835 835 697 697

631 631 675 675 675 631 631

136 217 136 250 352 136 217

M10S10L M10S10M M10S12L M10S12M M10S12H M10S14L M10S14LM M10S14M M10S14H M10S16L M10S16M M10S16H M10D10L M10D10M M10D12L M10D12M M10D12H M10D14L M10D14LM M10D14M M10D14H M10T10L M10T10M

2011040 2011049 2011058 2011067 2011071 2011076 2011085 2011094 2011097 2011098 2011099 2011100 2011103 2011112 2011121 2011130 2011135 2011136 2011141 2011137 2011138 2011139 2011140

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

788 788 835 835 835 892 892 892 892 949 949 949 697 697 741 741 741 799 799 799 799 700 700

631 631 675 675 675 733 733 733 733 790 790 790 631 631 675 675 675 722 722 722 722 634 634

136 217 136 250 352 136 186 261 374 136 247 310 136 217 136 250 352 136 186 261 374 195 282

M15S10L M15S10M M15S12L M15S12M M15S12H M15S14L M15S14LM M15S14M M15S14H M15S16L M15S16M M15S16H M15D10L M15D10M M15D12L

2011148 2011157 2011166 2011175 2011179 2011184 2011185 2011193 2011198 2011202 2011211 2011215 2011220 2011229 2011233

13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6

788 788 835 835 835 892 892 892 892 949 949 949 697 697 741

631 631 675 675 675 733 733 733 733 790 790 790 631 631 675

136 217 136 250 352 136 186 261 374 136 247 310 136 217 136

Dead End ‡ K Hook Width (mm)

Standard Wire Line Sizes (mm)*

T U Thick- Pin ness Hole (mm) (mm)

49.3 49.3 49.3 49.3 49.3 49.3 49.3

11-16 11-16 13-19 13-19 13-19 11-16 11-16

28.7 28.7 28.7 28.7 28.7 -

35.8 35.8 35.8 35.8 35.8 -

64 91 64 122 181 73 101

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 11-16 11-16

28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 -

35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 -

61 90 66 122 197 82 125 163 234 100 177 245 73 100 84 134 204 95 141 180 254 91 120

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 13-19

35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 — — —

42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 — — —

62 91 66 134 197 86 132 168 247 109 177 245 73 100 89

Weight Each (kg.)

McKissick Blocks

380Blk

Inquiry Stock No.

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 4.5 TONNES 356 48.5 66.0 356 48.5 66.0 406 48.5 66.0 406 48.5 66.0 406 48.5 66.0 356 48.5 66.0 356 48.5 66.0 9 TONNES 356 48.5 66.0 356 48.5 66.0 356 48.5 66.0 356 48.5 66.0 356 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 514 48.5 66.0 514 48.5 66.0 514 48.5 66.0 356 48.5 66.0 356 48.5 66.0 406 48.5 66.0 406 48.5 66.0 406 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 356 48.5 66.0 356 48.5 66.0 13.6 TONNES 356 48.5 66.0 356 48.5 66.0 406 48.5 66.0 406 48.5 66.0 406 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 457 48.5 66.0 514 48.5 66.0 514 48.5 66.0 514 48.5 66.0 356 48.5 66.0 356 48.5 66.0 406 48.5 66.0

267

McKissick® 380 Series Crane Blocks H Throat Working A B J K Opening Inquiry E F Load Overall Net Hook Hook With Stock Limit Length Length Thickness Width Flapper Thickness Width No. (mm) (mm) (t) † (mm) (mm) (mm) (mm) (mm) 2011238 13.6 741 675 250 406 48.5 66.0 49.3 2011243 13.6 741 675 352 406 48.5 66.0 49.3 2011256 13.6 799 733 136 457 48.5 66.0 49.3 2011257 13.6 799 733 186 457 48.5 66.0 49.3 2011265 13.6 799 733 261 457 48.5 66.0 49.3 2011269 13.6 799 733 374 457 48.5 66.0 49.3 2011270 13.6 856 790 136 514 48.5 66.0 49.3 2011271 13.6 856 790 247 514 48.5 66.0 49.3 2011272 13.6 856 790 310 514 48.5 66.0 49.3 2011273 13.6 700 634 195 356 48.5 66.0 49.3 2011274 13.6 700 634 282 356 48.5 66.0 49.3 2011275 13.6 744 679 195 406 48.5 66.0 49.3 2011283 13.6 744 679 310 406 48.5 66.0 49.3 2011285 13.6 744 679 411 406 48.5 66.0 49.3 2011287 13.6 699 633 252 356 48.5 66.0 49.3 2011288 13.6 699 633 333 356 48.5 66.0 49.3 18 TONNES 2011289 18 884 714 148 406 70.0 75.5 60.5 2011290 18 884 714 263 406 70.0 75.5 60.5 2011291 18 884 714 364 406 70.0 75.5 60.5 2011301 18 941 772 148 457 70.0 75.5 60.5 2011302 18 941 772 199 457 70.0 75.5 60.5 2011310 18 941 772 274 457 70.0 75.5 60.5 2011314 18 941 772 387 457 70.0 75.5 60.5 2011315 18 998 829 148 514 70.0 75.5 60.5 2011316 18 998 829 259 514 70.0 75.5 60.5 2011317 18 998 829 322 514 70.0 75.5 60.5 2011319 18 1125 929 174 578 70.0 75.5 60.5 2011328 18 1125 929 279 578 70.0 75.5 60.5 2011333 18 1125 929 329 578 70.0 75.5 60.5 2011330 18 1275 1078 174 730 70.0 75.5 60.5 2011331 18 1275 1078 371 730 70.0 75.5 60.5 2011332 18 1275 1078 472 730 70.0 75.5 60.5 2011335 18 746 670 148 356 70.0 75.5 60.5 2011337 18 746 670 229 356 70.0 75.5 60.5 2011346 18 790 714 148 406 70.0 75.5 60.5 2011355 18 790 714 263 406 70.0 75.5 60.5 2011364 18 790 714 364 406 70.0 75.5 60.5 2011373 18 848 772 148 457 70.0 75.5 60.5 2011374 18 848 772 199 457 70.0 75.5 60.5 2011375 18 848 772 274 457 70.0 75.5 60.5 2011377 18 848 772 387 457 70.0 75.5 60.5 2011378 18 905 829 148 514 70.0 75.5 60.5 2011379 18 905 829 260 514 70.0 75.5 60.5 2011380 18 905 829 323 514 70.0 75.5 60.5 2011381 18 749 673 208 356 70.0 75.5 60.5 2011382 18 749 673 289 356 70.0 75.5 60.5 2011391 18 794 718 208 406 70.0 75.5 60.5 2011400 18 794 718 322 406 70.0 75.5 60.5 2011409 18 794 718 424 406 70.0 75.5 60.5 2011418 18 851 775 208 457 70.0 75.5 60.5 2011420 18 851 775 259 457 70.0 75.5 60.5 2011427 18 851 775 332 457 70.0 75.5 60.5 2011432 18 851 775 445 457 70.0 75.5 60.5 2011433 18 748 672 265 356 70.0 75.5 60.5 2011434 18 748 672 346 356 70.0 75.5 60.5 2011435 18 792 716 265 406 70.0 75.5 60.5 2011436 18 792 716 379 406 70.0 75.5 60.5 2011437 18 792 716 481 406 70.0 75.5 60.5 23 TONNES @ - Ultimate Load is 3.6 times the Working Load Limit 2011441 23@ 941 772 148 457 70.0 75.5 60.5 2011443 23@ 941 772 199 457 70.0 75.5 60.5 2011445 23@ 941 772 274 457 70.0 75.5 60.5 2011448 23@ 941 772 387 457 70.0 75.5 60.5 2011451 23@ 998 829 148 514 70.0 75.5 60.5 2011454 23@ 998 829 260 514 70.0 75.5 60.5 2011457 23@ 998 829 323 514 70.0 75.5 60.5 2011461 23@ 1125 929 174 578 70.0 75.5 60.5 2011463 23@ 1125 929 279 578 70.0 75.5 60.5 2011467 23@ 1125 929 329 578 70.0 75.5 60.5

Dead End ‡

380Blk

Model No. M15D12M M15D12H M15D14L M15D14LM M15D14M M15D14H M15D16L M15D16M M15D16H M15T10L M15T10M M15T12L M15T12M M15T12H M15Q10L M15Q10M M20S12L M20S12M M20S12H M20S14L M20S14LM M20S14M M20S14H M20S16L M20S16M M20S16H M20S18L M20S18M M20S18H M20S24L M20S24M M20S24H M20D10L M20D10M M20D12L M20D12M M20D12H M20D14L M20D14LM M20D14M M20D14H M20D16L M20D16M M20D16H M20T10L M20T10M M20T12L M20T12M M20T12H M20T14L M20T14LM M20T14M M20T14H M20Q10L M20Q10M M20Q12L M20Q12M M20Q12H M25S14L M25S14LM M25S14M M25S14H M25S16L M25S16M M25S16H M25S18L M25S18M M25S18H

268

Standard Wire Line Sizes (mm)* 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 13-19 13-19 13-19 11-16 11-16

T U Thick- Pin ness Hole (mm) (mm) — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Weight Each (kg.) 134 204 95 141 180 254 136 211 277 91 120 98 154 225 117 145

13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 22-32 22-32 22-32 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 11-16 11-16 13-19 13-19 13-19

35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 38.9 38.9 38.9 35.1 35.1 35.1 — — — — — — — — — — — — — — — — — — — — — — — — — —

42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 42.2 52.3 52.3 52.3 42.2 42.2 42.2 — — — — — — — — — — — — — — — — — — — — — — — — — —

91 140 213 109 161 186 263 127 202 272 181 281 345 247 534 753 91 118 103 154 229 127 172 211 281 147 218 288 108 136 121 177 252 152 195 236 306 141 163 152 222 281

13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25

35.1 35.1 35.1 35.1 38.1 38.1 38.1 38.9 38.9 38.9

42.2 42.2 42.2 42.2 42.2 42.2 42.2 52.5 52.5 52.5

109 159 188 254 127 202 268 177 281 345

McKissick® 380 Series Crane Blocks Model No. M25S20L M25S20M M25S20H M25S24L M25S24M M25S24H M25D12L M25D12M M25D12H M25D14L M25D14LM M25D14M M25D14H M25D16L M25D16M M25D16H M25D18L M25D18M M25D18H M25T10L M25T10M M25T12L M25T12M M25T12H M25T14L M25T14LM M25T14M M25T14H M25T16L M25T16M M25T16H M25T18L M25T18M M25T18H M25Q10L M25Q10M M25Q12L M25Q12M M25Q12H M25Q14L M25Q14LM M25Q14H M25Q14M M30S16L M30S16M M30S16H M30S18L M30S18M M30S18H M30S20L M30S20M M30S20H M30S24L M30S24M M30S24H M30D14L M30D14LM M30D14M M30D14H M30D16L M30D16M M30D16H M30D18L M30D18M M30D18H M30T12L M30T12M M30T12H M30T14L

2011598 2011607 2011613 2011616 2011625 2011629 2011631 2011634 2011638 2011639 2011640 2011641 2011643 2011659 2011652 2011658 2011661 2011670 2011672 2011675 2011676 2011677 2011679 2011680 2011681 2011688

Working A Load Overall Limit Length (t) † (mm) 23@ 1173 23@ 1173 23@ 1173 23@ 1275 23@ 1275 23@ 1275 23@ 790 23@ 790 23@ 790 23@ 848 23@ 848 23@ 848 23@ 848 23@ 905 23@ 905 23@ 905 23@ 1003 23@ 1003 23@ 1003 23@ 749 23@ 749 23@ 794 23@ 794 23@ 794 23@ 851 23@ 851 23@ 851 23@ 851 23@ 908 23@ 908 23@ 908 23@ 1004 23@ 1004 23@ 1004 23@ 748 23@ 748 23@ 792 23@ 792 23@ 792 23@ 849 23@ 849 23@ 849 23@ 849 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

1103 1103 1103 1168 1168 1168 1257 1257 1257 1359 1359 1359 952 952 952 952 1009 1009 1009 1048 1048 1048 895 895 895 953

B E Net Length Thickness (mm) (mm) 976 174 976 288 976 390 1078 174 1078 371 1078 472 714 148 714 263 714 364 772 148 772 197 772 274 772 387 829 148 829 260 829 323 927 174 927 279 927 329 673 208 673 289 718 208 718 322 718 424 775 208 775 259 775 332 775 445 832 208 832 318 832 382 929 252 929 356 929 407 672 265 672 346 716 265 716 379 716 481 773 265 773 316 773 391 773 503 917 917 917 955 955 955 1044 1044 1044 1145 1145 1145 860 860 860 860 917 917 917 955 955 955 802 802 802 860

148 260 323 174 279 329 174 288 390 174 371 472 148 199 274 387 148 260 323 174 279 329 208 322 424 208

Dead End ‡ K Hook Width (mm) 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5

Standard Wire Line Sizes (mm)* 19-28 19-28 19-28 22-32 22-32 22-32 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 13-19 13-19 13-19 13-19

T U Thick- Pin ness Hole (mm) (mm) 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 38.1 38.1 38.1 38.9 38.9 38.9 38.1 38.1 38.1 38.1 38.1 38.1 — — — — — — — — — — — — — —

42.2 42.2 42.2 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 — — — — — — — — — — — — — —

Weight Each (kg.) 197 297 364 247 535 753 103 154 229 127 159 211 277 147 218 288 213 320 381 108 136 121 177 245 152 225 236 306 176 252 318 265 365 426 141 168 152 206 281 193 220 273 340 138 211 281 191 290 351 212 347 508 336 640 857 135 172 218 293 159 230 297 222 322 383 145 201 270 177

269

McKissick Blocks

380Blk

Inquiry Stock No. 2011458 2011459 2011460 2011464 2011465 2011466 2011468 2011469 2011470 2011472 2011481 2011490 2011495 2011499 2011508 2011512 2011576 2011579 2011581 2011514 2011515 2011517 2011526 2011531 2011535 2011540 2011544 2011553 2011562 2011571 2011575 2011578 2011580 2011587 2011588 2011589 2011590 2011591 2011592 2011593 2011596 2011594 2011595

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 629 70.0 75.5 629 70.0 75.5 629 70.0 75.5 730 70.0 75.5 730 70.0 75.5 730 70.0 75.5 406 70.0 75.5 406 70.0 75.5 406 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 514 70.0 75.5 514 70.0 75.5 514 70.0 75.5 578 70.0 75.5 578 70.0 75.5 578 70.0 75.5 356 70.0 75.5 356 70.0 75.5 406 70.0 75.5 406 70.0 75.5 406 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 514 70.0 75.5 514 70.0 75.5 514 70.0 75.5 578 70.0 75.5 578 70.0 75.5 578 70.0 75.5 356 70.0 75.5 356 70.0 75.5 406 70.0 75.5 406 70.0 75.5 406 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 457 70.0 75.5 27 TONNES 514 82.5 92.0 514 82.5 92.0 514 82.5 92.0 578 82.5 92.0 578 82.5 92.0 578 82.5 92.0 629 82.5 92.0 629 82.5 92.0 629 82.5 92.0 730 82.5 92.0 730 82.5 92.0 730 82.5 92.0 457 82.5 92.0 457 82.5 92.0 457 82.5 92.0 457 82.5 92.0 514 82.5 92.0 514 82.5 92.0 514 82.5 92.0 578 82.5 92.0 578 82.5 92.0 578 82.5 92.0 406 82.5 92.0 406 82.5 92.0 406 82.5 92.0 457 82.5 92.0

McKissick® 380 Series Crane Blocks 380Blk

Working A Load Overall Limit Length (t) † (mm) 27 953 27 953 27 953 27 1010 27 1010 27 1010 27 1048 27 1048 27 1048 27 1099 27 1099 27 1099 27 851 27 851 27 895 27 895 27 895 27 953 27 953 27 953 27 953 27 1010 27 1010 27 1010

B E Net Length Thickness (mm) (mm) 860 257 860 332 860 445 917 208 917 318 917 382 955 252 955 356 955 407 1006 252 1006 366 1006 468 758 265 758 346 802 265 802 379 802 481 860 265 860 316 860 392 860 505 917 265 917 378 917 441

Model No. M30T14LM M30T14M M30T14H M30T16L M30T16M M30T16H M30T18L M30T18M M30T18H M30T20L M30T20M M30T20H M30Q10L M30Q10M M30Q12L M30Q12M M30Q12H M30Q14L M30Q14LM M30Q14M M30Q14H M30Q16L M30Q16M M30Q16H

Inquiry Stock No. 2011703 2011697 2011702 2011706 2011708 2011710 2011712 2011715 2011719 2011742 2011743 2011744 2011714 2011716 2011717 2011718 2011720 2011724 2011741 2011733 2011737 2011738 2011739 2011740

M35S18L M35S18M M35S18H M35S20L M35S20M M35S20H M35S24L M35S24M M35S24H M35D16L M35D16M M35D16H M35D18L M35D18M M35D18H M35T14L M35T14LM M35T14M M35T14H M35T16L M35T16M M35T16H M35T18L M35T18M M35T18H M35T20L M35T20M M35T20H M35Q12L M35Q12M M35Q12H M35Q14L M35Q14LM M35Q14M M35Q14H M35Q16L M35Q16M M35Q16H M35QN14L M35QN14LM M35QN14M M35QN14H

2011745 2011746 2011747 2011748 2011751 2011755 2011752 2011753 2011754 2011756 2011757 2011758 2011760 2011769 2011774 2011778 2011792 2011787 2011793 2011794 2011795 2011796 2011797 2011799 2011802 2011798 2011800 2011801 2011803 2011804 2011805 2011806 2011807 2011814 2011817 2011818 2011819 2011820 2011815 2011808 2011809 2011810

32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32

1270 1270 1270 1359 1359 1359 1461 1461 1461 1111 1111 1111 1047 1047 1047 1056 1056 1056 1056 1113 1113 1113 1149 1149 1149 1238 1238 1238 998 998 998 1056 1056 1056 1056 1113 1113 1113 1143 1143 1143 1143

1034 1034 1034 1122 1130 1122 1224 1224 1224 995 995 995 955 955 955 938 938 938 938 995 995 995 1034 1034 1034 1122 1122 1122 881 881 881 938 938 938 938 995 995 995 938 938 938 938

174 279 329 174 288 390 174 371 472 174 285 348 252 356 407 208 259 332 445 208 318 382 252 356 407 252 366 468 265 379 481 265 316 392 505 265 378 441 337 387 464 500

M40S20L M40S20M

2011833 2011834

36 36

1418 1418

1168 1168

198 313

270

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 457 82.5 92.0 457 82.5 92.0 457 82.5 92.0 514 82.5 92.0 514 82.5 92.0 514 82.5 92.0 578 82.5 92.0 578 82.5 92.0 578 82.5 92.0 629 82.5 92.0 629 82.5 92.0 629 82.5 92.0 356 82.5 92.0 356 82.5 92.0 406 82.5 92.0 406 82.5 92.0 406 82.5 92.0 457 82.5 92.0 457 82.5 92.0 457 82.5 92.0 457 82.5 92.0 514 82.5 92.0 514 82.5 92.0 514 82.5 92.0 32 TONNES 578 76.0 116 578 76.0 116 578 76.0 116 629 76.0 116 629 76.0 116 629 76.0 116 730 76.0 116 730 76.0 116 730 76.0 116 514 76.0 116 514 76.0 116 514 76.0 116 578 76.0 116 578 76.0 116 578 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 514 76.0 116 514 76.0 116 514 76.0 116 578 76.0 116 578 76.0 116 578 76.0 116 629 76.0 116 629 76.0 116 629 76.0 116 406 76.0 116 406 76.0 116 406 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 514 76.0 116 514 76.0 116 514 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 457 76.0 116 36 TONNES 629 76.0 116 629 76.0 116

Dead End ‡ K Hook Width (mm) 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

Standard Wire Line Sizes (mm)* 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22

T U Thick- Pin ness Hole (mm) (mm) — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0

16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 13-19 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 13-19 13-19 13-19 13-19

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 31.8 31.8 31.8 31.8

52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 35.8 35.8 35.8 35.8

272 332 392 244 379 536 336 640 857 195 265 332 254 365 424 204 245 286 357 227 303 365 308 408 469 338 479 635 199 252 322 206 236 294 370 265 340 404 240 281 367 435

92.0 92.0

19-28 19-28

44.5 44.5

58.0 58.0

299 433

Weight Each (kg.) 218 261 337 206 277 342 281 388 449 312 449 608 159 184 168 225 297 206 236 290 362 195 265 332

McKissick® 380 Series Crane Blocks Dead End ‡

380Blk

Model No. M40S20H M40S24L M40S24M M40S24H M40D18L M40D18M M40D18H M40D20L M40D20M M40D20H M40T14L M40T14M M40T14H M40T16L M40T16M M40T16H M40T18L M40T18M M40T18H M40T20L M40T20M M40T20H M40Q14L M40Q14M M40Q14H M40Q16L M40Q16M M40Q16H M40Q18L M40Q18M M40Q18H M40QN14L M40QN14M M40QN14H M45S24L M45S24M M45S24H M45D20L M45D20M M45D20H M45T16L M45T16M M45T16H M45T18L M45T18M M45T18H M45T20L M45T20M M45T20H M45Q14L M45Q14M M45Q14H M45Q16L M45Q16M M45Q16H M45Q18L M45Q18M M45Q18H M45QN16L M45QN16M M45QN16H M50S24L M50S24M M50S24H M50D24L M50D24M M50D24H M50T18L

Standard Wire Line Sizes (mm)* 19-28 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 13-19 13-19 13-19

T U Thick- Pin ness Hole (mm) (mm) 44.5 58.0 44.5 58.0 44.5 58.0 44.5 58.0 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 31.8 35.8 31.8 35.8 31.8 35.8

Weight Each (kg.) 589 358 671 880 311 420 487 344 494 635 235 315 382 238 313 379 362 462 525 403 538 694 243 338 413 284 356 422 422 522 585 231 333 408

22-32 22-32 22-32 19-28 19-28 19-28 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 14-22 14-22 14-22

44.5 44.5 44.5 — — — — — — — — — — — — — — — — — — — — — 31.8 31.8 31.8

58.0 58.0 58.0 — — — — — — — — — — — — — — — — — — — — — 36.6 36.6 36.6

365 655 880 344 479 635 238 313 379 362 462 525 403 538 694 243 338 413 284 356 422 422 522 585 302 373 439

22-32 22-32 22-32 22-32 22-32 22-32 16-25

51.0 51.0 51.0 — — — —

64.5 64.5 64.5 — — — —

435 710 941 517 803 1021 422

271

McKissick Blocks

H Throat Working A B J K Opening Inquiry E F Load Overall Net Hook Hook With Stock Limit Length Length Thickness Width Flapper Thickness Width No. (mm) (mm) (t) † (mm) (mm) (mm) (mm) (mm) 2011835 36 1418 1168 414 629 86.0 129 94.5 2011825 36 1519 1270 198 730 86.0 129 94.5 2011829 36 1519 1270 395 730 86.0 129 94.5 2011832 36 1519 1270 497 730 86.0 129 94.5 2011918 36 1208 1080 198 578 86.0 129 94.5 2011919 36 1208 1080 303 578 86.0 129 94.5 2011920 36 1208 1080 354 578 86.0 129 94.5 2011841 36 1272 1143 198 629 86.0 129 94.5 2011850 36 1272 1143 313 629 86.0 129 94.5 2011854 36 1272 1143 414 629 86.0 129 94.5 2011855 36 1103 975 208 457 86.0 129 94.5 2011856 36 1103 975 332 457 86.0 129 94.5 2011857 36 1103 975 445 457 86.0 129 94.5 2011859 36 1161 1032 208 514 86.0 129 94.5 2011868 36 1161 1032 318 514 86.0 129 94.5 2011871 36 1161 1032 382 514 86.0 129 94.5 2011874 36 1202 1073 264 578 86.0 129 94.5 2011877 36 1202 1073 368 578 86.0 129 94.5 2011881 36 1202 1073 419 578 86.0 129 94.5 2011882 36 1272 1143 264 629 86.0 129 94.5 2011883 36 1272 1143 378 629 86.0 129 94.5 2011884 36 1272 1143 480 629 86.0 129 94.5 2011885 36 1103 975 265 457 86.0 129 94.5 2011886 36 1103 975 392 457 86.0 129 94.5 2011891 36 1103 975 429 457 86.0 129 94.5 2011895 36 1161 1032 265 514 86.0 129 94.5 2011904 36 1161 1032 378 514 86.0 129 94.5 2011908 36 1161 1032 441 514 86.0 129 94.5 2011910 36 1202 1073 338 578 86.0 129 94.5 2011913 36 1202 1073 443 578 86.0 129 94.5 2011917 36 1202 1073 494 578 86.0 129 94.5 2011921 36 1194 988 337 457 86.0 129 94.5 2011922 36 1194 988 464 457 86.0 129 94.5 2011923 36 1194 988 500 457 86.0 129 94.5 40 TONNES @ - Ultimate Load is 3.6 times the Working Load Limit 2011924 40@ 1519 1270 198 730 86.0 129 94.5 2011925 40@ 1519 1270 395 730 86.0 129 94.5 2011926 40@ 1519 1270 497 730 86.0 129 94.5 2011928 40@ 1272 1143 198 629 86.0 129 94.5 2011931 40@ 1272 1143 313 629 86.0 129 94.5 2011937 40@ 1272 1143 414 629 86.0 129 94.5 2011942 40@ 1161 1032 208 514 86.0 129 94.5 2011951 40@ 1161 1032 318 514 86.0 129 94.5 2011960 40@ 1161 1032 382 514 86.0 129 94.5 2011969 40@ 1202 1073 264 578 86.0 129 94.5 2011978 40@ 1202 1073 368 578 86.0 129 94.5 2011987 40@ 1202 1073 419 578 86.0 129 94.5 2011993 40@ 1272 1143 264 629 86.0 129 94.5 2011996 40@ 1272 1143 378 629 86.0 129 94.5 2012000 40@ 1272 1143 480 629 86.0 129 94.5 2012001 40@ 1103 975 265 457 86.0 129 94.5 2012003 40@ 1103 975 392 457 86.0 129 94.5 2012004 40@ 1103 975 429 457 86.0 129 94.5 2012005 40@ 1161 1032 265 514 86.0 129 94.5 2012006 40@ 1161 1032 378 514 86.0 129 94.5 2012007 40@ 1161 1032 441 514 86.0 129 94.5 2012008 40@ 1202 1073 338 578 86.0 129 94.5 2012009 40@ 1202 1073 443 578 86.0 129 94.5 2012010 40@ 1202 1073 494 578 86.0 129 94.5 2011997 40@ 1249 1032 337 514 86.0 129 94.5 2011998 40@ 1249 1032 448 514 86.0 129 94.5 2011999 40@ 1249 1032 511 514 86.0 129 94.5 45 TONNES 2012015 45 1629 1349 198 730 105 152 113 2012016 45 1629 1349 395 730 105 152 113 2012017 45 1629 1349 497 730 105 152 113 2012018 45 1502 1349 198 730 105 152 113 2012019 45 1502 1349 395 730 105 152 113 2012020 45 1502 1349 497 730 105 152 113 2012014 45 1362 1210 264 578 105 152 113

McKissick® 380 Series Crane Blocks 380Blk

Working A Load Overall Limit Length (t) † (mm) 45 1362 45 1362 45 1375 45 1375 45 1375 45 1502 45 1502 45 1502 45 1267 45 1267 45 1267 45 1362 45 1362 45 1362 45 1375 45 1375 45 1375 45 1314 45 1314 45 1314 45 1372 45 1372 45 1372 45 1314 45 1314 45 1314

B E Net Length Thickness (mm) (mm) 1210 368 1210 419 1222 264 1222 378 1222 480 1349 264 1349 461 1349 562 1115 338 1115 449 1115 513 1286 338 1286 443 1286 494 1223 338 1223 452 1223 554 1064 337 1064 462 1064 575 1115 337 1115 448 1115 511 1064 394 1064 521 1064 633

Model No. M50T18M M50T18H M50T20L M50T20M M50T20H M50T24L M50T24M M50T24H M50Q16L M50Q16M M50Q16H M50Q18L M50Q18M M50Q18H M50Q20L M50Q20M M50Q20H M50QN14L M50QN14M M50QN14H M50QN16L M50QN16M M50QN16H M50SX14L M50SX14M M50SX14H

Inquiry Stock No. 2012023 2012027 2012032 2012041 2012045 2012048 2012050 2012055 2012059 2012068 2012073 2012077 2012086 2012091 2012095 2012097 2012101 2012056 2012057 2012058 2012060 2012061 2012062 2012063 2012064 2012065

M55S24L M55S24M M55S24H M55D24L M55D24M M55D24H M55T18L M55T18M M55T18H M55T20L M55T20M M55T20H M55T24L M55T24M M55T24H M55Q16L M55Q16M M55Q16H M55Q18L M55Q18M M55Q18H M55Q20L M55Q20M M55Q20H M55QN14L M55QN14M M55QN14H M55QN16L M55QN16M M55QN16H M55QN18L M55QN18M M55QN18H M55SX14L M55SX14M M55SX14H

2012105 2012106 2012107 2012108 2012109 2012110 2012104 2012113 2012122 2012111 2012114 2012123 2012112 2012124 2012125 2012131 2012140 2012143 2012146 2012149 2012153 2012171 2012172 2012173 2012126 2012127 2012128 2012158 2012167 2012170 2012147 2012150 2012154 2012135 2012141 2012144

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

1629 1629 1629 1502 1502 1502 1362 1362 1362 1375 1375 1375 1502 1502 1502 1267 1267 1267 1362 1362 1362 1375 1375 1375 1314 1314 1314 1372 1372 1372 1489 1489 1489 1314 1314 1314

1349 1349 1349 1349 1349 1349 1210 1210 1210 1222 1222 1222 1349 1349 1349 1115 1115 1115 1286 1286 1286 1222 1222 1222 1064 1064 1064 1115 1115 1115 1210 1210 1210 1064 1064 1064

198 395 497 198 395 497 264 368 419 264 378 480 264 461 562 338 449 513 338 443 494 338 452 579 337 464 575 337 448 511 445 549 600 394 520 633

M60D24L M60D24M M60D24H M60T18L M60T18M M60T18H

2012175 2012179 2012183 2012187 2012191 2012195

54 54 54 54 54 54

1502 1502 1502 1362 1362 1362

1349 1349 1349 1210 1210 1210

198 313 497 264 368 419

272

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 457 105 152 457 105 152 457 105 152 514 105 152 514 105 152 514 105 152 457 105 152 457 105 152 457 105 152 50 TONNES 730 105 152 730 105 152 730 105 152 730 105 152 730 105 152 730 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 457 105 152 457 105 152 457 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 457 105 152 457 105 152 457 105 152 54 TONNES 730 105 152 730 105 152 730 105 152 578 105 152 578 105 152 578 105 152

Dead End ‡ K Hook Width (mm) 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

Standard Wire Line Sizes (mm)* 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 14-22 14-22 14-22 13-19 13-19 13-19

T U Thick- Pin ness Hole (mm) (mm) — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8 31.8 35.8

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

22-32 22-32 22-32 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 13-19 13-19 13-19 14-22 14-22 14-22 16-25 16-25 16-25 13-19 13-19 13-19

51.0 51.0 51.0 — — — — — — — — — — — — 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

64.5 64.5 64.5 — — — — — — — — — — — — 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8

435 723 941 517 803 1021 399 499 562 449 587 742 544 857 1074 369 445 510 451 553 617 517 676 841 381 469 538 397 467 535 626 726 794 420 463 567

113 113 113 113 113 113

22-32 22-32 22-32 16-25 16-25 16-25

517 803 1021 400 506 562

Weight Each (kg.) 499 562 449 587 742 544 857 1074 369 445 510 451 553 617 517 676 853 365 435 538 397 467 535 420 463 567

McKissick® 380 Series Crane Blocks Model No. M60T20L M60T20M M60T20H M60T24L M60T24M M60T24H M60Q16L M60Q16M M60Q16H M60Q18L M60Q18M M60Q18H M60Q20L M60Q20M M60Q20H M60Q24L M60Q24M M60Q24H M60QN20L M60QN20M M60QN20H M60SX14L M60SX14M M60SX14H M60SX18L M60SX18M M60SX18H M65D24L M65D24M M65D24H M65T18L M65T18M M65T18H M65T20L M65T20M M65T20H M65T24L M65T24M M65T24H M65Q16L M65Q16M M65Q16H M65Q18L M65Q18M M65Q18H M65Q20L M65Q20M M65Q20H M65Q24L M65Q24M M65Q24H M65QN16L M65QN16M M65QN16H M65QN18L M65QN18M M65QN18H M65QN20L M65QN20M M65QN20H M65QN24L M65QN24M M65QN24H M65SX16L M65SX16M M65SX16H M65SX18L M65SX18M M65SX18H

2012376 2012377 2012378 2012304 2012305 2012306 2012307 2012311 2012315 2012316 2012317 2012318 2012312 2012313 2012314 2012340 2012341 2012342 2012319 2012323 2012327 2012328 2012329 2012330 2012331 2012335 2012339 2012343 2012347 2012351 2012355 2012359 2012363 2012364 2012368 2012372 2012352 2012353 2012354 2012356 2012357 2012358

Working A Load Overall Limit Length (t) † (mm) 54 1375 54 1375 54 1375 54 1502 54 1502 54 1502 54 1267 54 1267 54 1267 54 1362 54 1362 54 1362 54 1375 54 1375 54 1375 54 1502 54 1502 54 1502 54 1502 54 1502 54 1502 54 1314 54 1314 54 1314 54 1489 54 1489 54 1489 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59

1502 1502 1502 1362 1362 1362 1375 1375 1375 1502 1502 1502 1267 1267 1267 1362 1362 1362 1375 1375 1375 1502 1502 1502 1445 1445 1445 1489 1489 1489 1502 1502 1502 1591 1591 1591 1445 1445 1445 1489 1489 1489

B E Net Length Thickness (mm) (mm) 1222 264 1222 378 1222 480 1349 262 1349 460 1349 559 1115 338 1115 449 1115 513 1210 338 1210 443 1210 494 1222 338 1222 452 1222 554 1349 338 1349 535 1349 637 1222 445 1222 559 1222 660 1162 394 1162 520 1162 631 1210 496 1210 601 1210 652 1349 1349 1349 1210 1210 1210 1222 1222 1222 1349 1349 1349 1115 1115 1115 1210 1210 1210 1222 1222 1222 1349 1349 1349 1165 1165 1165 1210 1210 1210 1222 1222 1222 1311 1311 1311 1165 1165 1165 1210 1210 1210

198 395 497 264 368 419 264 378 480 264 460 562 338 449 513 338 443 494 338 452 554 338 535 637 445 556 619 445 549 600 445 559 660 445 641 743 496 607 671 496 601 652

Dead End ‡ K Hook Width (mm) 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

Standard Wire Line Sizes (mm)* 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 19-28 19-28 19-28 13-19 13-19 13-19 16-25 16-25 16-25

113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113

22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25

T U Thick- Pin ness Hole (mm) (mm) 38.1 35.8 38.1 35.8 38.1 35.8 31.8 35.8 31.8 35.8 31.8 35.8 38.1 52.5 38.1 52.5 38.1 52.5 — — — — — — — — — — — — — — — — — — — — — — — — 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

— — — — — — — — — — — — — — — — — — — — — — — — 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 52.5 52.5 52.5 52.5 52.5 52.5

Weight Each (kg.) 431 603 769 569 857 1073 411 467 553 454 557 620 517 676 841 659 962 1179 710 844 1002 420 499 567 640 748 816 517 803 1021 422 499 590 451 590 742 569 857 1073 411 467 553 481 551 649 517 676 841 659 962 1179 401 475 544 626 726 793 710 844 1002 831 1150 1360 531 606 674 640 748 816

273

McKissick Blocks

380Blk

Inquiry Stock No. 2012199 2012203 2012207 2012211 2012215 2012219 2012223 2012227 2012231 2012235 2012239 2012243 2012247 2012251 2012255 2012259 2012263 2012267 2012271 2012275 2012279 2012283 2012287 2012291 2012295 2012299 2012303

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 629 105 152 629 105 152 629 105 152 457 105 152 457 105 152 457 105 152 578 105 152 578 105 152 578 105 152 59 TONNES 730 105 152 730 105 152 730 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152 629 105 152 629 105 152 629 105 152 730 105 152 730 105 152 730 105 152 514 105 152 514 105 152 514 105 152 578 105 152 578 105 152 578 105 152

McKissick® 380 Series Crane Blocks 380Blk

Working A Load Overall Limit Length (t) † (mm) 59 1502 59 1502 59 1502

B E Net Length Thickness (mm) (mm) 1222 496 1222 610 1222 712

Model No. M65SX20L M65SX20M M65SX20H

Inquiry Stock No. 2012367 2012371 2012375

M70D24L M70D24M M70D24H M70T18L M70T18M M70T18H M70T20L M70T20M M70T20H M70T24L M70T24M M70T24H M70Q16L M70Q16M M70Q16H M70Q18L M70Q18M M70Q18H M70Q20L M70Q20M M70Q20H M70Q24L M70Q24M M70Q24H M70QN16L M70QN16M M70QN16H M70QN18L M70QN18M M70QN18H M70QN20L M70QN20M M70QN20H M70QN24L M70QN24M M70QN24H M70SX16L M70SX16M M70SX16H M70SX18L M70SX18M M70SX18H M70SX20L M70SX20M M70SX20H

2012379 2012383 2012387 2012391 2012395 2012399 2012403 2012407 2012411 2012415 2012419 2012423 2012427 2012431 2012435 2012439 2012443 2012447 2012451 2012455 2012459 2012463 2012467 2012471 2012475 2012479 2012483 2012487 2012491 2012495 2012499 2012503 2012507 2012511 2012515 2012519 2012523 2012527 2012531 2012535 2012539 2012543 2012547 2012551 2012555

63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63

1637 1637 1637 1497 1497 1497 1548 1548 1548 1637 1637 1637 1453 1453 1453 1497 1497 1497 1548 1548 1548 1637 1637 1637 1640 1640 1640 1608 1608 1608 1675 1675 1675 1764 1764 1764 1564 1564 1564 1624 1624 1624 1675 1675 1675

1467 1467 1467 1327 1327 1327 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378

282 479 580 282 387 438 282 397 489 282 480 581 338 449 514 338 443 494 338 452 554 338 535 637 464 575 638 464 568 619 464 578 679 464 660 762 518 629 693 518 623 674 518 633 734

M75D24L M75D24M M75D24H M75T20L M75T20M M75T20H M75T24L M75T24M M75T24H M75Q16L M75Q16M M75Q16H M75Q18L M75Q18M M75Q18H M75Q20L M75Q20M M75Q20H M75Q24L M75Q24M

2012559 2012563 2012567 2012571 2012575 2012579 2012583 2012587 2012591 2012596 2012600 2012604 2012595 2012599 2012603 2012607 2012611 2012615 2012619 2012623

68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68

1637 1637 1637 1548 1548 1548 1637 1637 1637 1453 1453 1453 1497 1497 1497 1548 1548 1548 1637 1637

1467 1467 1467 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378 1467 1467

282 479 580 282 397 498 282 480 581 338 449 513 338 443 494 338 452 554 338 535

274

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 629 105 152 629 105 152 629 105 152 63 TONNES 730 137 170 730 137 170 730 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 68 TONNES 730 137 170 730 137 170 730 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170

Dead End ‡ K Hook Width (mm) 113 113 113

Standard Wire Line Sizes (mm)* 19-28 19-28 19-28

T U Thick- Pin ness Hole (mm) (mm) 38.1 52.5 38.1 52.5 38.1 52.5

108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108

— — — — — — — — — — — — — — — — — — — — — — — — 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

— — — — — — — — — — — — — — — — — — — — — — — — 42.2 42.2 42.2 42.2 42.2 42.2 52.5 52.5 52.5 52.5 52.5 52.5 42.2 42.2 42.2 52.5 52.5 52.5 52.5 52.5 52.5

690 993 1211 572 680 748 641 776 935 745 1040 1257 533 608 676 590 699 766 651 786 945 779 1082 1300 608 683 751 760 860 949 857 991 1151 1012 1315 1533 700 776 844 869 968 1036 914 1048 1208

108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108

22-32 22-32 22-32 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32

— — — — — — — — — — — — — — — — — — — —

690 993 1211 641 776 935 737 1039 1257 533 608 676 590 699 766 651 786 945 779 1082

Weight Each (kg.) 737 871 1031

McKissick® 380 Series Crane Blocks Working A Load Overall Limit Length (t) † (mm) 68 1637 68 1564 68 1564 68 1564 68 1608 68 1608 68 1608 68 1675 68 1675 68 1675 68 1637 68 1637 68 1637 68 1564 68 1564 68 1564 68 1624 68 1624 68 1624 68 1675 68 1675 68 1675

B E Net Length Thickness (mm) (mm) 1467 637 1283 464 1283 575 1283 638 1327 464 1327 568 1327 619 1378 464 1378 578 1378 679 1467 464 1467 660 1467 762 1283 518 1283 629 1283 693 1327 518 1327 623 1327 674 1378 518 1378 633 1378 734

Model No. M75Q24H M75QN16L M75QN16M M75QN16H M75QN18L M75QN18M M75QN18H M75QN20L M75QN20M M75QN20H M75QN24L M75QN24M M75QN24H M75SX16L M75SX16M M75SX16H M75SX18L M75SX18M M75SX18H M75SX20L M75SX20M M75SX20H M80D24L M80D24M M80D24H M80T20L M80T20M M80T20H M80T24L M80T24M M80T24H M80Q16L M80Q16M M80Q16H M80Q18L M80Q18M M80Q18H M80Q20L M80Q20M M80Q20H M80Q24L M80Q24M M80Q24H M80QN16L M80QN16M M80QN16H M80QN18L M80QN18M M80QN18H M80QN20L M80QN20M M80QN20H M80QN24L M80QN24M M80QN24H M80SX16L M80SX16M M80SX16H M80SX18L M80SX18M M80SX18H M80SX20L M80SX20M M80SX20H

2012691 2012695 2012699 2012703 2012707 2012711 2012715 2012719 2012723 2012727 2012731 2012735 2012739 2012743 2012747 2012751 2012755 2012759 2012763 2012767 2012771 2012775 2012779 2012783 2012787 2012791 2012795 2012799 2012803 2012807 2012811 2012815 2012819 2012823 2012827 2012831 2012835 2012839 2012843 2012847 2012851 2012855

72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72

1637 1637 1637 1548 1548 1548 1637 1637 1637 1453 1453 1453 1497 1497 1497 1548 1548 1548 1637 1637 1637 1564 1564 1564 1608 1608 1608 1675 1675 1675 1764 1764 1764 1564 1564 1564 1624 1624 1624 1675 1675 1675

1467 1467 1467 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378 1467 1467 1467 1283 1283 1283 1327 1327 1327 1378 1378 1378

282 479 580 282 397 498 282 480 581 338 449 513 338 443 494 338 452 554 338 535 637 464 575 638 464 568 619 464 578 679 464 660 762 518 629 693 518 623 674 518 633 734

M90T24L M90T24M M90T24H M90Q20L

2012859 2012863 2012867 2012871

81 81 81 81

1740 1740 1740 1626

1522 1522 1522 1407

296 493 595 344

Dead End ‡ K Hook Width (mm) 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108

Standard Wire Line Sizes (mm)* 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28

T U Thick- Pin ness Hole (mm) (mm) — — 38.1 42.2 38.1 42.2 38.1 42.2 38.1 42.2 38.1 42.2 38.1 42.2 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5

108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108

22-32 22-32 22-32 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 14-22 14-22 14-22 16-25 16-25 16-25 19-28 19-28 19-28

— — — — — — — — — — — — — — — — — — — — — 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

— — — — — — — — — — — — — — — — — — — — — 42.2 42.2 42.2 42.2 42.2 42.2 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5

690 993 1211 641 776 935 737 1040 1257 533 608 676 590 699 766 651 786 945 779 1082 1300 608 683 751 760 860 927 857 991 1151 1012 1315 1533 700 776 844 869 968 1036 914 1048 1208

140 140 140 140

22-32 22-32 22-32 19-28

— — — —

876 1179 1397 807

Weight Each (kg.) 1300 608 644 751 760 860 927 857 991 1151 1012 1315 1533 700 776 844 869 968 1036 914 1048 1208

McKissick Blocks

380Blk

Inquiry Stock No. 2012627 2012631 2012635 2012639 2012632 2012636 2012640 2012643 2012647 2012651 2012655 2012659 2012663 2012668 2012672 2012676 2012667 2012671 2012675 2012679 2012683 2012687

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 730 137 170 514 137 170 514 137 170 514 137 170 565 137 170 565 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 72 TONNES 730 137 170 730 137 170 730 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 730 137 170 730 137 170 730 137 170 514 137 170 514 137 170 514 137 170 578 137 170 578 137 170 578 137 170 629 137 170 629 137 170 629 137 170 81 TONNES 730 114 218 730 114 218 730 114 218 629 114 218

275

McKissick® 380 Series Crane Blocks 380Blk

Working A Load Overall Limit Length (t) † (mm) 81 1626 81 1626 81 1740 81 1740 81 1740 81 1702 81 1702 81 1702 81 1753 81 1753 81 1753 81 1854 81 1854 81 1854 81 1702 81 1702 81 1702 81 1753 81 1753 81 1753 81 1854 81 1854 81 1854

B E Net Length Thickness (mm) (mm) 1407 459 1407 560 1522 351 1522 548 1522 649 1369 464 1369 568 1369 619 1407 464 1407 578 1407 679 1509 464 1509 660 1509 762 1357 518 1357 623 1357 674 1407 518 1407 633 1407 734 1509 518 1509 715 1509 817

Model No. M90Q20M M90Q20H M90Q24L M90Q24M M90Q24H M90QN18L M90QN18M M90QN18H M90QN20L M90QN20M M90QN20H M90QN24L M90QN24M M90QN24H M90SX18L M90SX18M M90SX18H M90SX20L M90SX20M M90SX20H M90SX24L M90SX24M M90SX24H

Inquiry Stock No. 2012875 2012879 2012883 2012887 2012891 2012904 2012908 2012912 2012895 2012899 2012903 2012907 2012911 2012915 2012919 2012923 2012927 2012931 2012935 2012939 2012943 2012947 2012952

M100T24L M100T24M M100T24H M100Q20L M100Q20M M100Q20H M100Q24L M100Q24M M100Q24H M100QN18L M100QN18M M100QN18H M100QN20L M100QN20M M100QN20H M100QN24L M100QN24M M100QN24H M100SX18L M100SX18M M100SX18H M100SX20L M100SX20M M100SX20H M100SX24L M100SX24M M100SX24H

2012860 2012864 2012868 2012967 2012971 2012975 2012979 2012983 2012987 2012991 2012995 2012999 2013003 2013007 2013011 2013015 2013019 2013023 2013027 2013031 2013035 2013039 2013043 2013047 2013051 2013055 2013059

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

1740 1740 1740 1626 1626 1626 1740 1740 1740 1702 1702 1702 1753 1753 1753 1854 1854 1854 1702 1702 1702 1753 1753 1753 1854 1854 1854

1522 1522 1522 1407 1407 1407 1522 1522 1522 1369 1369 1369 1407 1407 1407 1509 1509 1509 1357 1357 1357 1407 1407 1407 1509 1509 1509

296 493 595 344 459 560 351 548 649 464 568 619 464 578 679 464 660 762 518 623 674 518 633 734 518 715 817

M115Q24L M115Q24M M115Q24H M115QN24L M115QN24M M115QN24H M115SX18L M115SX18M M115SX18H M115SX20L M115SX20M M115SX20H M115SX24L M115SX24M M115SX24H

2013075 2013079 2013083 2013087 2013091 2013095 2013099 2013103 2013107 2013111 2013115 2013119 2013123 2013127 2013131

104 104 104 104 104 104 104 104 104 104 104 104 104 104 104

1829 1829 1829 1962 1962 1962 1810 1810 1810 1861 1861 1861 1962 1962 1962

1597 1597 1597 1597 1597 1597 1445 1445 1445 1496 1496 1496 1597 1597 1597

418 614 716 514 711 813 559 663 714 559 673 775 560 756 858

M125Q24L M125Q24M

2013135 2013139

113 113

1829 1829

1597 1597

418 614

276

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 578 114 218 578 114 218 578 114 218 629 114 218 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 578 114 218 578 114 218 578 114 218 629 114 218 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 90 TONNES 730 114 218 730 114 218 730 114 218 629 114 218 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 578 114 218 578 114 218 578 114 218 629 114 218 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 578 114 218 578 114 218 578 114 218 629 114 218 629 114 218 629 114 218 730 114 218 730 114 218 730 114 218 104 TONNES 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 578 114 232 578 114 232 578 114 232 629 114 232 629 114 232 629 114 232 730 114 232 730 114 232 730 114 232 113 TONNES 730 114 232 730 114 232

Dead End ‡ K Hook Width (mm) 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140

Standard Wire Line Sizes (mm)* 19-28 19-28 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

T U Thick- Pin ness Hole (mm) (mm) — — — — — — — — — — 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 58.0 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5 38.1 52.5

140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140

22-32 22-32 22-32 19-28 19-28 19-28 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

— — — — — — — — — 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

— — — — — — — — — 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 58.0 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5

876 1179 1397 807 941 1101 938 1225 1442 875 984 1051 927 1061 1221 1124 1427 1644 943 1043 1110 982 1117 1277 1186 1473 1692

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

22-32 22-32 22-32 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

1249 1535 1753 1506 1792 2009 1200 1309 1376 1292 1427 1586 1508 1795 2013

152 152

22-32 22-32

1249 1535

Weight Each (kg.) 941 1101 938 1225 1442 875 984 1051 927 1061 1221 1124 1427 1644 943 1043 1110 982 1117 1277 1186 1473 1692

McKissick® 380 Series Crane Blocks Working A Load Overall Limit Length (t) † (mm) 113 1829 113 1962 113 1962 113 1962 113 1810 113 1810 113 1810 113 1861 113 1861 113 1861 113 1962 113 1962 113 1962

B E Net Length Thickness (mm) (mm) 1597 716 1597 514 1597 711 1597 813 1445 559 1445 663 1445 714 1496 559 1496 673 1496 775 1597 560 1597 756 1597 858

Model No. M125Q24H M125QN24L M125QN24M M125QN24H M125SX18L M125SX18M M125SX18H M125SX20L M125SX20M M125SX20H M125SX24L M125SX24M M125SX24H M130Q24L M130Q24M M130Q24H M130QN24L M130QN24M M130QN24H M130SX18L M130SX18M M130SX18H M130SX20L M130SX20M M130SX20H M130SX24L M130SX24M M130SX24H

2013192 2013196 2013200 2013191 2013195 2013199 2013203 2013207 2013211 2013218 2013219 2013223 2013227 2013231 2013235

117 117 117 117 117 117 117 117 117 117 117 117 117 117 117

1829 1829 1829 1962 1962 1962 1810 1810 1810 1861 1861 1861 1962 1962 1962

1597 1597 1597 1597 1597 1597 1445 1445 1445 1496 1496 1496 1597 1597 1597

418 614 716 514 711 813 559 663 714 559 673 775 560 756 858

M140Q24L M140Q24M M140Q24H M140QN24L M140QN24M M140QN24H M140SX18L M140SX18M M140SX18H M140SX20L M140SX20M M140SX20H M140SX24L M140SX24M M140SX24H

2013252 2013256 2013260 2013251 2013255 2013259 2013263 2013267 2013271 2013275 2013279 2013283 2013287 2013291 2013295

126 126 126 126 126 126 126 126 126 126 126 126 126 126 126

1829 1829 1829 1962 1962 1962 1810 1810 1810 1861 1861 1861 1962 1962 1962

1597 1597 1597 1597 1597 1597 1445 1445 1445 1496 1496 1496 1597 1597 1597

418 614 716 514 711 813 559 663 714 559 673 775 560 756 858

M150Q24L M150Q24M M150Q24H M150QN24L M150QN24M M150QN24H M150SX20L M150SX20M M150SX20H M150SX24L M150SX24M M150SX24H

2013299 2013303 2013307 2013311 2013315 2013319 2013323 2013327 2013331 2013335 2013339 2013343

135 135 135 135 135 135 135 135 135 135 135 135

1829 1829 1829 1962 1962 1962 1861 1861 1861 1962 1962 1962

1597 1597 1597 1597 1597 1597 1496 1496 1496 1597 1597 1597

418 614 716 559 756 857 559 673 775 560 756 858

M165Q24L M165Q24M M165Q24H M165QN24L M165QN24M M165QN24H M165SX20L M165SX20M M165SX20H M165SX24L M165SX24M

2013347 2013351 2013355 2013359 2013363 2013367 2013371 2013375 2013379 2013383 2013387

149 149 149 149 149 149 149 149 149 149 149

1829 1829 1829 1962 1962 1962 1861 1861 1861 1962 1962

1597 1597 1597 1597 1597 1597 1496 1496 1496 1597 1597

418 614 716 559 756 857 559 673 775 560 756

Dead End ‡ K Hook Width (mm) 152 152 152 152 152 152 152 152 152 152 152 152 152

Standard Wire Line Sizes (mm)* 22-32 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

T U Thick- Pin ness Hole (mm) (mm) 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5 44.5 64.5

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

22-32 22-32 22-32 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

1249 1535 1753 1506 1792 2009 1200 1309 1376 1292 1427 1586 1508 1795 2013

152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

22-32 22-32 22-32 22-32 22-32 22-32 16-25 16-25 16-25 19-28 19-28 19-28 22-32 22-32 22-32

— — — 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

— — — 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

1249 1535 1753 1506 1792 2009 1200 1309 1376 1292 1427 1586 1508 1795 2013

152 152 152 152 152 152 152 152 152 152 152 152

22-32 22-32 22-32 22-32 22-32 22-32 19-28 19-28 19-28 22-32 22-32 22-32

— — — 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

— — — 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

1249 1535 1753 1658 1945 2164 1292 1427 1586 1508 1795 2013

152 152 152 152 152 152 152 152 152 152 152

22-32 22-32 22-32 22-32 22-32 22-32 19-28 19-28 19-28 22-32 22-32

— — — 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

— — — 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

1249 1535 1753 1658 1945 2164 1292 1427 1586 1508 1795

Weight Each (kg.) 1753 1506 1792 2009 1200 1309 1376 1292 1427 1586 1508 1795 2013

277

McKissick Blocks

380Blk

Inquiry Stock No. 2013143 2013147 2013151 2013155 2013159 2013163 2013167 2013171 2013175 2013179 2013183 2013187 2013188

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 730 114 232 730 114 232 730 114 232 730 114 232 578 114 232 578 114 232 578 114 232 629 114 232 629 114 232 629 114 232 730 114 232 730 114 232 730 114 232 117 TONNES 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 578 114 232 578 114 232 578 114 232 629 114 232 629 114 232 629 114 232 730 114 232 730 114 232 730 114 232 126 TONNES 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 578 114 232 578 114 232 578 114 232 629 114 232 629 114 232 629 114 232 730 114 232 730 114 232 730 114 232 135 TONNES 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 629 114 232 629 114 232 629 114 232 730 114 232 730 114 232 730 114 232 149 TONNES 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 730 114 232 629 114 232 629 114 232 883 114 232 730 114 232 730 114 232

McKissick® 380 Series Crane Blocks 380Blk

Working A Load Overall Limit Length (t) † (mm) 149 1962

B E Net Length Thickness (mm) (mm) 1597 858

Model No. M165SX24H

Inquiry Stock No. 2013391

M200QN24L M200QN24M M200QN24H M200QN30L M200QN30M M200QN30H M200SX24L M200SX24M M200SX24H M200SX30L M200SX30M M200SX30H

2013395 2013399 2013403 2013396 2013400 2013404 2013407 2013411 2013415 2013419 2013423 2013427

180 180 180 180 180 180 180 180 180 180 180 180

2102 2102 2102 2254 2254 2254 2102 2102 2102 2254 2254 2254

1721 1721 1721 1873 1873 1873 1721 1721 1721 1873 1873 1873

610 806 908 610 673 711 610 806 908 610 673 711

M225QN24L M225QN24M M225QN24H M225QN30L M225QN30M M225QN30H M225SX24L M225SX24M M225SX24H M225SX30L M225SX30M M225SX30H

2013420 2013424 2013428 2013421 2013425 2013429 2013422 2013426 2013430 2013432 2013436 2013440

204 204 204 204 204 204 204 204 204 204 204 204

2102 2102 2102 2254 2254 2254 2102 2102 2102 2254 2254 2254

1721 1721 1721 1873 1873 1873 1721 1721 1721 1873 1873 1873

610 806 908 610 673 711 610 806 908 610 673 711

M250SX30L M250SX30M M250SX30H M250SV24L M250SV24M M250SV24H

2013431 2013435 2013439 2013443 2013447 2013451

226 226 226 226 226 226

2369 2369 2369 2216 2216 2216

1965 1965 1965 1813 1813 1813

724 826 876 914 1111 1213

M275SX30L M275SX30M M275SX30H M275SV24L M275SV24M M275SV24H

2013456 2013460 2013464 2013457 2013461 2013465

249 249 249 249 249 249

2369 2369 2369 2216 2216 2216

1965 1965 1965 1813 1813 1813

724 826 876 914 1111 1213

M300SX30L M300SX30M M300SX30H M300SV24L M300SV24M M300SV24H M300OCT30L M300OCT30M M300OCT30H

2013479 2013483 2013487 2013491 2013495 2013499 2013527 2013531 2013535

272 272 272 272 272 272 272 272 272

2369 2369 2369 2216 2216 2216 2369 2369 2369

1965 1965 1965 1813 1813 1813 1965 1965 1965

724 826 876 914 1111 1213 914 965 991

H Throat J Opening F Hook With Width Flapper Thickness (mm) (mm) (mm) 730 114 232 180 TONNES 730 127 248 730 127 248 730 127 248 883 127 248 883 127 248 883 127 248 730 127 248 730 127 248 730 127 248 883 127 248 883 127 248 883 127 248 204 TONNES 730 159 270 730 159 270 730 159 270 883 159 270 883 159 270 883 159 270 730 159 270 730 159 270 730 159 270 883 159 270 883 159 270 883 159 270 226 TONNES 927 159 270 927 159 270 927 159 270 730 159 270 730 159 270 730 159 270 249 TONNES 927 159 270 927 159 270 927 159 270 730 159 270 730 159 270 730 159 270 272 TONNES 927 159 270 927 159 270 927 159 270 730 159 270 730 159 270 730 159 270 927 159 270 927 159 270 927 159 270

Dead End ‡ K Hook Width (mm) 152

Standard Wire Line Sizes (mm)* 22-32

T U Thick- Pin ness Hole (mm) (mm) 44.5 64.5

178 178 178 178 178 178 178 178 178 178 178 178

22-32 22-32 22-32 25-35 25-35 25-35 22-32 22-32 22-32 25-35 25-35 25-35

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

2087 2439 2649 2378 2786 3049 1985 2275 2491 2540 3207 3272

184 184 184 184 184 184 184 184 184 184 184 184

22-32 22-32 22-32 25-35 25-35 25-35 22-32 22-32 22-32 25-35 25-35 25-35

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

2119 2439 2649 2378 2786 3049 1985 2272 2491 2601 3009 3272

184 184 184 184 184 184

25-35 25-35 25-35 22-32 22-32 22-32

57.0 57.0 57.0 57.0 57.0 57.0

64.5 64.5 64.5 64.5 64.5 64.5

3299 3699 3957 2930 3249 3460

184 184 184 184 184 184

25-35 25-35 25-35 22-32 22-32 22-32

57.0 57.0 57.0 57.0 57.0 57.0

64.5 64.5 64.5 64.5 64.5 64.5

3299 3699 3957 2930 3249 3460

184 184 184 184 184 184 184 184 184

25-35 25-35 25-35 22-32 22-32 22-32 25-35 25-35 25-35

57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0

64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5 64.5

3299 3699 3957 2930 3249 3460 4602 4938 5258

Weight Each (kg.) 2013

* Additional wire line sizes available upon request. † Ultimate Load is 4 times the Working Load Limit unless otherwise noted. ‡ Dead End dimensions for 2, 3, & 4 sheave blocks are shown on page 264.

278

McKissick® 380 Series Crane Blocks s k c o l B

e n a r C

s e i r e S

0 8 3

k c i s s i K c M

Replacement Sheaves for McKissick® 380 Series Crane Blocks • Sheave diameters range - 10" thru 24" (254mm thru 610mm). • Wire line size range - 7/16" thru 1-1/4" (11mm thru 32mm). • 16" (406mm) diameter sheaves and larger are Roll Forged™ with Flame hardened grooves to minimum Rockwell 35C. • Standard replacement sheaves are furnished with roller bearings. Bronze bushed sheaves are available upon request.

380Shv

Weight Each (kg) 11.8 12.2 15.4 19.1 19.5 19.5 28.1 28.1 39.5 39.5 44.5 53 53 56 62

McKissick Blocks

Inquiry Stock No. 4700008 4700017 4700026 4700035 4700044 4700053 4700062 4700071 4700081 4700089 4700098 4700107 4700116 4700125 4700134

Replacement Sheaves for McKissick® 380 Series Crane Blocks Nominal Sheave Shaft Hub Standard Wire Diameter Diameter Width Model Line Sizes (mm) (mm) (mm) No. (mm) A B C SHV 10 254 63.5 51.0 11-16 SHV 12 305 63.5 51.0 13-19 SHV 14 356 63.5 51.0 13-19 SHV 16 406 63.5 51.0 14-22 SHV 16 406 76.0 51.0 14-22 SHV 16 406 76.0 63.5 14-22 SHV 18 457 76.0 63.5 16-25 SHV 18 457 89.0 63.5 16-25 SHV 20 508 76.0 63.5 19-28 SHV 20 508 89.0 63.5 19-28 SHV 20 508 114 70.0 19-28 SHV 24 610 76.0 63.5 22-32 SHV 24 610 89.0 63.5 22-32 SHV 24 610 114 70.0 22-32 SHV 24 610 127 70.0 22-32

279

380_block.fm Page 26 Friday, March 31, 2006 3:58 PM

McKissick® Easy Reeve® Crane Blocks 380 Series Easy Reeve® Hook Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

On Pages 332 - 339

• Wide range of product available. • Capacity: 5 to 80 tons - Larger Models Available. • Sheave Sizes: 10" to 20". • Wire Line Sizes: 7/16" to 1-1/4". • All single point shank hooks are genuine Crosby®, forged alloy steel, Quenched and Tempered, and have the patented QUIC-CHECK® markings (Duplex hooks are available on most sizes). • Design factor of 4 to 1 (unless otherwise noted). • All Easy Reeve® Blocks are furnished standard with Roller Bearings. • Reeving Guides Standard - All Models. • Blocks thru 25 tons use 319N hooks with S-4320 latches. • Heavy Duty Positive Locking (PL) Latch - Models: 25 tons and larger. • Sheave lubrication through center pin - separate lube channel to each bearing. • Sheaves fully protected by side plates. • Dual action hook (swings and rotates). • Repair parts available through world wide distribution network. • All Easy Reeve® blocks, 16" and larger, are furnished with McKissick® Roll-Forged™ sheaves with flame hardened grooves. • Manufactured by an ISO 9001 and API Q1 certified facility. • “Look for the Orange Hook . . . the mark of genuine McKissick® quality”.

OPTIONS AVAILABLE • • • • Center “Dead End” to promote better block travel under various reeving configurations.

Duplex Hooks (75 tons & larger) Swivel Tee and Shackle Assemblies Sheave Shrouds Anti Rotation - Locking Device (75 tons & larger) • Plate Steel Cheek Weights • Third party testing with Certification available upon request.

Sheave Guards that open to allow block reeving without removing the rope end fitting.

Flat Bottom side plate for self standing during reeving process.

Forged Crosby® alloy steel hooks with patented QUIC-CHECK® markings and Heavy Duty positive locking hook latch. 280

M_380_block.fm Page 27 Friday, March 24, 2006 1:40 PM

McKissick® Easy Reeve® Crane Blocks

Dead End Chart (Double, Triple & Quad Sheave Blocks*) Dimensions (mm) Wire Rope Size (mm)

Recommended Wedge Socket McKissick® US-422 /US-422T Utility Socket

T Thickness

U Hole Diameter

Stock No.

25.4

32.5

1044309+

US4

25.4

32.5

1044318+

US4

25.4

32.5

1044336+

US5

25.4

32.5

1044345+

US5

31.8

42.2

1044363+

US6

31.8

42.2

1038580

US7

31.8

42.2

1044417+

US8

44.5

65.0

1044426+

US10

44.5

65.0

1044435+

US10

Size

+ US-422T “TERMINATOR”TM Style.

281

McKissick® Easy Reeve® Crane Blocks ®

e v e e R

y s a E

k c i s s i K c M

McKissick® Easy Reeve® Crane Blocks • Specify Wire Line size when ordering. • Dead End Dimensions on page 281 of this catalog.

Model No.

Inquiry Stock No.

Working Load Limit (t)*

A Overall Length (mm)

B Net Length (mm)

E5S10L E5S10M E5S10H

2014001 2014003 2014004

4.5 4.5 4.5

909 909 909

789 789 789

E10S10L E10S10M E10S10H E10S14L E10S14M E10S14H E10S16L E10S16M E10S16H E10D10L E10D10M E10D10H E10D12L E10D12M E10D12H E10T10L E10T10M E10T10H E10T12L E10T12M E10T12H E10Q14L E10Q14M E10Q14H

2014011 2014013 2014014 2014021 2014023 2014024 2014031 2014033 2014034 2014041 2014043 2014044 2014051 2014053 2014054 2014061 2014063 2014064 2014071 2014073 2014074 2014081 2014083 2014084

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

909 909 909 1001 1001 1001 1096 1096 1096 909 909 909 947 947 947 909 909 909 947 947 947 1001 1001 1001

789 789 789 881 881 881 976 976 976 789 789 789 827 827 827 789 789 789 827 827 827 881 881 881

E15S10L E15S10M E15S10H E15S12L E15S12M E15S12H E15S14L E15S14M E15S14H E15S16L E15S16M E15S16H E15D10L E15D10M E15D10H E15D12L E15D12M E15D12H E15T10L E15T10M E15T10H E15T12L E15T12M E15T12H E15Q14L E15Q14M E15Q14H

2014091 2014093 2014094 2014101 2014103 2014104 2014111 2014113 2014114 2014121 2014123 2014124 2014131 2014133 2014134 2014141 2014143 2014144 2014151 2014153 2014154 2014161 2014163 2014164 2014171 2014173 2014174

13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5

909 909 909 947 947 947 1001 1001 1001 1096 1096 1096 909 909 909 947 947 947 909 909 909 947 947 947 1001 1001 1001

789 789 789 827 827 827 881 881 881 976 976 976 789 789 789 827 827 827 789 789 789 827 827 827 881 881 881

E20S10L E20S10M E20S10H E20S14L E20S14M

2014181 2014183 2014184 2014191 2014193

18 18 18 18 18

957 957 957 1049 1049

828 828 828 920 920

E F Block Block Thickness Width (mm) (mm) 4.5 Tonnes 174 368 225 368 263 368 9 Tonnes 174 368 225 368 263 368 174 464 225 464 263 464 174 521 225 521 263 521 174 368 225 368 263 368 174 419 225 419 263 419 207 368 258 368 296 368 207 419 258 419 296 419 264 464 314 464 353 464 13.5 Tonnes 174 368 225 368 263 368 174 419 225 419 263 419 174 464 225 464 263 464 174 521 225 521 263 521 174 368 225 368 263 368 174 419 225 419 263 419 207 368 258 368 296 368 207 419 258 419 296 419 264 464 314 464 353 464 18 Tonnes 174 368 225 368 263 368 174 464 225 464

H Throat Opening with Flapper (mm)

J Hook Thickness (mm)

K Hook Width (mm)

Standard Wire Rope Size (mm)

Weight Each (kg.)†

48.5 48.5 48.5

66.0 66.0 66.0

49.3 49.3 49.3

11-16 11-16 11-16

107 155 192

48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5

66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

11-16 11-16 11-16 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 11-16 13-19 13-19 13-19 11-16 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19

107 155 192 125 194 246 149 239 308 122 170 204 126 182 225 144 192 230 147 202 245 194 267 319

48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5 48.5

66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0 66.0

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

11-16 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19 14-22 14-22 14-22 11-16 11-16 11-16 13-19 13-19 13-19 11-16 11-16 11-16 13-19 13-19 13-19 13-19 13-19 13-19

107 155 192 114 170 213 125 194 246 149 239 308 122 170 207 126 182 225 144 192 230 147 202 245 194 267 319

70.0 70.0 70.0 70.0 70.0

75.5 75.5 75.5 75.5 75.5

60.5 60.5 60.5 60.5 60.5

11-16 11-16 11-16 13-19 13-19

113 161 198 133 201

Fr5EZ

Fr10EZ

Fr15EZ

Fr20EZ

282

McKissick® Easy Reeve® Crane Blocks Model No. E20S14H E20S18L E20S18M E20S18H E20D12L E20D12M E20D12H E20D14L E20D14M E20D14H E20T12L E20T12M E20T12H E20T14L E20T14M E20T14H E20Q12L E20Q12M E20Q12H E20Q14L E20Q14M E20Q14H

Inquiry Stock No. 2014194 2014201 2014203 2014204 2014211 2014213 2014214 2014221 2014223 2014224 2014231 2014233 2014234 2014241 2014243 2014244 2014251 2014253 2014254 2014261 2014263 2014264

Working Load Limit (t)* 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

A Overall Length (mm) 1049 1195 1195 1195 995 995 995 1049 1049 1049 995 995 995 1049 1049 1049 995 995 995 1049 1049 1049

B Net Length (mm) 920 1066 1066 1066 866 866 866 920 920 920 866 866 866 920 920 920 866 866 866 920 920 920

E25S16L E25S16M E25S16H E25S18L E25S18M E25S18H E25D12L E25D12M E25D12H E25D14L E25D14M E25D14H E25T12L E25T12M E25T12H E25T14L E25T14M E25T14H E25Q12L E25Q12M E25Q12H E25Q14L E25Q14M E25Q14H

2014271 2014273 2014274 2014281 2014283 2014284 2014291 2014293 2014294 2014301 2014303 2014304 2014311 2014313 2014314 2014321 2014323 2014324 2014331 2014333 2014334 2014341 2014343 2014344

23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23

1145 1145 1145 1195 1195 1195 995 995 995 1049 1049 1049 995 995 995 1049 1049 1049 995 995 995 1049 1049 1049

1015 1015 1015 1066 1066 1066 866 866 866 920 920 920 866 866 866 920 920 920 866 866 866 920 920 920

E30S18L E30S18M E30S18H E30S20L E30S20M E30S20H E30D14L E30D14M E30D14H E30D18L E30D18M E30D18H E30T14L E30T14M E30T14H E30T16L E30T16M E30T16H E30Q14L E30Q14M E30Q14H

2014351 2014353 2014354 2014356 2014358 2014359 2014361 2014363 2014364 2014371 2014373 2014374 2014381 2014383 2014384 2014391 2014393 2014394 2014401 2014403 2014404

27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

1310 1310 1310 1399 1399 1399 1113 1113 1113 1310 1310 1310 1164 1164 1164 1259 1259 1259 1164 1164 1164

1173 1173 1173 1173 1173 1173 976 976 976 1173 1173 1173 1027 1027 1027 1122 1122 1122 1027 1027 1027

E F Block Block Thickness Width (mm) (mm) 263 464 174 565 231 565 269 565 174 419 225 419 263 419 174 464 225 464 263 464 207 419 258 419 296 419 207 464 258 464 296 464 264 419 314 419 353 419 264 464 314 464 353 464 23 Tonnes 174 521 225 521 263 521 174 565 231 565 269 565 174 419 225 419 263 419 174 464 225 464 263 464 207 419 258 419 296 419 207 464 258 464 296 464 264 419 314 419 353 419 264 464 314 464 353 464 27 Tonnes 174 565 231 565 269 565 174 622 225 622 263 622 174 464 225 464 263 464 174 565 231 565 269 565 207 464 258 464 296 464 207 521 258 521 296 521 264 464 314 464 353 464

H Throat Opening with Flapper (mm) 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

J Hook Thickness (mm) 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5

K Hook Width (mm) 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5

Standard Wire Rope Size (mm) 13-19 16-26 16-26 16-26 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19

Weight Each (kg.)† 254 177 297 378 132 188 231 148 216 269 151 208 251 171 239 292 182 238 280 204 273 324

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5 75.5

60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5

14-22 14-22 14-22 16-26 16-26 16-26 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19 13-19

155 244 313 177 296 378 132 188 231 148 216 269 151 208 251 167 239 292 182 238 280 204 273 324

82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5

92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

16-26 16-26 16-26 19-28 19-28 19-28 13-19 13-19 13-19 16-26 16-26 16-26 13-19 13-19 13-19 14-22 14-22 14-22 13-19 13-19 13-19

207 326 407 253 393 500 171 239 292 234 353 435 198 266 319 229 319 387 228 297 349

Fr30EZ

283

McKissick Blocks

Fr25EZ

McKissick® Easy Reeve® Crane Blocks Model No.

Inquiry Stock No.

Working Load Limit (t)*

A Overall Length (mm)

B Net Length (mm)

E35S20L E35S20M E35S20H E35D18L E35D18M E35D18H E35T14L E35T14M E35T14H E35T16L E35T16M E35T16H E35Q14L E35Q14M E35Q14H

2014406 2014408 2014409 2014411 2014413 2014414 2014421 2014423 2014424 2014431 2014433 2014434 2014441 2014443 2014444

32 32 32 32 32 32 32 32 32 32 32 32 32 32 32

1502 1502 1502 1413 1413 1413 1267 1267 1267 1362 1362 1362 1267 1267 1267

1341 1341 1341 1252 1252 1252 1106 1106 1106 1202 1202 1202 1106 1106 1106

E40T14L E40T14M E40T14H E40T16L E40T16M E40T16H E40T18L E40T18M E40T18H E40Q14L E40Q14M E40Q14H E40Q16L E40Q16M E40Q16H

2014451 2014453 2014454 2014461 2014463 2014464 2014471 2014473 2014474 2014481 2014483 2014484 2014491 2014493 2014494

36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

1319 1319 1319 1415 1415 1415 1465 1465 1465 1319 1319 1319 1415 1415 1415

1146 1146 1146 1242 1242 1242 1292 1292 1292 1146 1146 1146 1242 1242 1242

E45T14L E45T14M E45T14H E45T16L E45T16M E45T16H E45T18L E45T18M E45T18H E45Q14L E45Q14M E45Q14H E45Q16L E45Q16M E45Q16H

2014501 2014503 2014504 2014511 2014513 2014514 2014521 2014523 2014524 2014531 2014533 2014534 2014541 2014543 2014544

41 41 41 41 41 41 41 41 41 41 41 41 41 41 41

1319 1319 1319 1415 1415 1415 1465 1465 1465 1319 1319 1319 1415 1415 1415

1146 1146 1146 1242 1242 1242 1292 1292 1292 1146 1146 1146 1242 1242 1242

E50T18L E50T18M E50T18H E50Q16L E50Q16M E50Q16H E50QN16L E50QN16M E50QN16H

2014551 2014553 2014554 2014561 2014563 2014564 2014571 2014573 2014574

45 45 45 45 45 45 45 45 45

1619 1619 1619 1568 1568 1568 1568 1568 1568

1403 1403 1403 1353 1353 1353 1353 1353 1353

E55T18L E55T18M E55T18H E55Q16L E55Q16M E55Q16H E55QN16L E55QN16M E55QN16H

2014581 2014583 2014584 2014591 2014593 2014594 2014601 2014603 2014604

50 50 50 50 50 50 50 50 50

1619 1619 1619 1568 1568 1568 1568 1568 1568

1403 1403 1403 1353 1353 1353 1353 1353 1353

E60T20L

2014611

1708

1492

E F Block Block Thickness Width (mm) (mm) 32 Tonnes 174 622 225 622 263 622 174 565 231 565 269 565 207 464 258 464 296 464 207 521 258 521 296 521 264 464 314 464 353 464 36 Tonnes 207 464 258 464 296 464 207 521 258 521 296 521 207 565 264 565 302 565 264 464 314 464 353 464 264 521 314 521 353 521 40 Tonnes 207 464 258 464 296 464 207 521 258 521 296 521 207 565 264 565 302 565 264 464 314 464 353 464 264 521 314 521 353 521 45 Tonnes 283 565 340 565 378 565 338 521 389 521 427 521 357 521 408 521 446 521 50 Tonnes 283 565 340 565 378 565 338 521 389 521 427 521 357 521 408 521 446 521 54 Tonnes 283 622

H Throat Opening with Flapper (mm)

J Hook Thickness (mm)

K Hook Width (mm)

Standard Wire Rope Size (mm)

Weight Each (kg.)†

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

116 116 116 116 116 116 116 116 116 116 116 116 116 116 116

92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0 92.0

19-28 19-28 19-28 16-26 16-26 16-26 13-19 13-19 13-19 14-22 14-22 14-22 13-19 13-19 13-19

253 393 500 258 377 458 221 290 342 253 342 411 252 320 372

86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0

129 129 129 129 129 129 129 129 129 129 129 129 129 129 129

94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5

13-19 13-19 13-19 14-22 14-22 14-22 16-26 16-26 16-26 13-19 13-19 13-19 14-22 14-22 14-22

247 315 368 279 372 437 322 441 497 277 346 398 313 403 472

86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0 86.0

129 129 129 129 129 129 129 129 129 129 129 129 129 129 129

94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5

13-19 13-19 13-19 14-22 14-22 14-22 16-26 16-26 16-26 13-19 13-19 13-19 14-22 14-22 14-22

247 315 368 279 372 437 322 441 522 277 346 398 313 403 472

105 105 105 105 105 105 105 105 105

152 152 152 152 152 152 152 152 152

113 113 113 113 113 113 113 113 113

16-26 16-26 16-26 14-22 14-22 14-22 14-22 14-22 14-22

474 593 674 484 551 642 520 610 678

105 105 105 105 105 105 105 105 105

152 152 152 152 152 152 152 152 152

113 113 113 113 113 113 113 113 113

16-26 16-26 16-26 14-22 14-22 14-22 14-22 14-22 14-22

474 593 674 484 574 642 520 610 678

152

113

19-28

531

Fr35EZ

Fr45EZ

Fr50EZ

Fr5 EZ

284

105

McKissick® Easy Reeve® Crane Blocks Model No. E60T20M E60T20H E60Q18L E60Q18M E60Q18H E60QN18L E60QN18M E60QN18H E60QN20L E60QN20M E60QN20H

Inquiry Stock No. 2014613 2014614 2014621 2014623 2014624 2014631 2014633 2014634 2014641 2014643 2014644

Working Load Limit (t)* 54 54 54 54 54 54 54 54 54 54 54

A Overall Length (mm) 1708 1708 1619 1619 1619 1619 1619 1619 1708 1708 1708

B Net Length (mm) 1492 1492 1403 1403 1403 1403 1403 1403 1492 1492 1492

E65T20L E65T20M E65T20H E65Q18L E65Q18M E65Q18H E65QN18L E65QN18M E65QN18H E65QN20L E65QN20M E65QN20H

2014651 2014653 2014654 2014661 2014663 2014664 2014671 2014673 2014674 2014681 2014683 2014684

59 59 59 59 59 59 59 59 59 59 59 59

1708 1708 1708 1619 1619 1619 1619 1619 1619 1708 1708 1708

1492 1492 1492 1403 1403 1403 1403 1403 1403 1492 1492 1492

E70T20L E70T20M E70T20H E70Q18L E70Q18M E70Q18H E70QN18L E70QN18M E70QN18H E70QN20L E70QN20M E70QN20H

2014691 2014693 2014694 2014701 2014703 2014704 2014711 2014713 2014714 2014721 2014723 2014724

63 63 63 63 63 63 63 63 63 63 63 63

1884 1884 1884 1796 1796 1796 1796 1796 1796 1884 1884 1884

1651 1651 1651 1562 1562 1562 1562 1562 1562 1651 1651 1651

E75T20L E75T20M E75T20H E75Q18L E75Q18M E75Q18H E75QN18L E75QN18M E75QN18H E75QN20L E75QN20M E75QN20H

2014731 2014733 2014734 2014741 2014743 2014744 2014751 2014753 2014754 2014761 2014763 2014764

68 68 68 68 68 68 68 68 68 68 68 68

1884 1884 1884 1796 1796 1796 1796 1796 1796 1884 1884 1884

1651 1651 1651 1562 1562 1562 1562 1562 1562 1651 1651 1651

E80T20L E80T20M E80T20H E80Q18L E80Q18M E80Q18H E80QN18L E80QN18M E80QN18H E80QN20L E80QN20M E80QN20H

2014771 2014773 2014774 2014781 2014783 2014784 2014791 2014793 2014794 2014801 2014803 2014804

72 72 72 72 72 72 72 72 72 72 72 72

1884 1884 1884 1796 1796 1796 1796 1796 1796 1884 1884 1884

1651 1651 1651 1562 1562 1562 1562 1562 1562 1651 1651 1651

E F Block Block Thickness Width (mm) (mm) 334 622 372 622 338 565 395 565 433 565 357 565 414 565 452 565 357 622 408 622 446 622 59 Tonnes 283 622 334 622 372 622 338 565 395 565 433 565 357 565 414 565 452 565 357 622 408 622 446 622 63 Tonnes 283 622 334 622 372 622 338 565 395 565 433 565 357 565 414 565 452 565 357 622 408 622 446 622 68 Tonnes 283 622 334 622 372 622 338 565 395 565 433 565 357 565 414 565 452 565 357 622 408 622 446 622 72 Tonnes 283 622 334 622 372 622 338 565 395 565 433 565 357 565 414 565 452 565 357 622 408 622 446 622

H Throat Opening with Flapper (mm) 105 105 105 105 105 105 105 105 105 105 105

J Hook Thickness (mm) 152 152 152 152 152 152 152 152 152 152 152

K Hook Width (mm) 113 113 113 113 113 113 113 113 113 113 113

Standard Wire Rope Size (mm) 19-28 19-28 16-26 16-26 16-26 16-26 16-26 16-26 19-28 19-28 19-28

Weight Each (kg.)† 668 758 521 640 721 550 670 750 628 765 855

105 105 105 105 105 105 105 105 105 105 105 105

152 152 152 152 152 152 152 152 152 152 152 152

113 113 113 113 113 113 113 113 113 113 113 113

19-28 19-28 19-28 16-26 16-26 16-26 16-26 16-26 16-26 19-28 19-28 19-28

531 668 758 521 640 721 550 670 750 628 765 855

137 137 137 137 137 137 137 137 137 137 137 137

170 170 170 170 170 170 170 170 170 170 170 170

122 122 122 122 122 122 122 122 122 122 122 122

19-28 19-28 19-28 16-26 16-26 16-26 16-26 16-26 16-26 19-28 19-28 19-28

626 762 853 658 777 858 629 748 830 754 891 982

137 137 137 137 137 137 137 137 137 137 137 137

170 170 170 170 170 170 170 170 170 170 170 170

122 122 122 122 122 122 122 122 122 122 122 122

19-28 19-28 19-28 16-26 16-26 16-26 16-26 16-26 16-26 19-28 19-28 19-28

626 762 853 658 777 858 629 748 830 754 891 982

137 137 137 137 137 137 137 137 137 137 137 137

170 170 170 170 170 170 170 170 170 170 170 170

122 122 122 122 122 122 122 122 122 122 122 122

19-28 19-28 19-28 16-26 16-26 16-26 16-26 16-26 16-26 19-28 19-28 19-28

626 762 853 658 777 858 629 748 830 754 891 982

Fr65EZ

Fr70EZ

Fr80EZ

* Ultimate Load is 4 times the Working Load Limit. † Additional cheek weight kits are available.

285

McKissick Blocks

Fr75EZ

McKissick® Easy Reeve® Crane Blocks s k c o l B

e n a r C

e v e e R

y s a E

k c i s s i K c M

Replacement Sheaves for McKissick® Easy Reeve® Crane Blocks • 16" (406mm) diameter sheaves and larger are Roll Forged™ with Flame hardened grooves to minimum Rockwell 35C. • Sheave diameter range - 10" thru 20" (254 mm thru 508 mm). • Standard replacement sheaves are furnished with roller bearings. Bronze bushed sheaves are available upon request. • Wire line size range - 7/16" thru 1-1/8" (11 thru 28 mm).

EZShv

Inquiry Stock No. 4700205 4700214 4700223 4700232 4700241 4700250 4700269 4700278 4700287 4700296 4700304

286

Replacement Sheaves for McKissick® EASY REEVE® Series Crane Blocks Nominal Shaft Hub Standard Wire Sheave Diameter Width Line Size Diameter (mm) (mm) (mm) (mm) B C 254 76.0 44.5 11-16 305 76.0 44.5 13-19 305 89.0 51.0 13-19 356 76.0 44.5 13-19 356 89.0 51.0 13-19 406 76.0 44.5 14-22 406 89.0 51.0 14-22 457 76.0 44.5 16-25 457 89.0 51.0 16-25 457 114 57.0 16-25 508 114 57.0 19-28

Weight Each (kg.) 11.8 12.2 15.4 19.1 19.5 19.5 28.1 28.1 39.5 39.5 44.5

McKissick® Scrap Handling Blocks SEE APPLICATION AND WARNING INFORMATION On Pages 332-339

Para Español: www.thecrosbygroup.com

• All single point shank hooks are genuine Crosby®, forged alloy steel, Quenched and Tempered, and have the patented QUIC-CHECK® markings. • Durable - Allows longer continuous duty cycle. • Can be used with magnet and drop ball • Single sheave design • Dual action hook (Swings and Rotates) • Utilize McKissick® Roll-Forged™ sheaves with flame hardened grooves. • Furnished standard with Bronze Bushed Sheaves. • Optional Tapered Roller Bearings.

381-SY

s k c o l B

g n i l d n a H

p a r c S

k c i s s i K c M

381-SY Scrap Handling Blocks Dimensions (mm)

381SY

Model No. S15S16L S20S18L S25S20L S30S24L S40S24L

381-SY Inquiry Stock No. 2014810 2014812 2014814 2014816 2014818

Working Sheave Load Diameter Limit * (mm) (t) 13.5 406 18.0 457 22.5 508 27.0 610 36.0 610

Standard Wire Line (mm) 14-22 16-25 19-28 22-32 22-32

Weight Each (kg.) 129 179 209 320 370

A 944 1004 1071 1281 1418

B 868 929 995 1189 1289

E 161 174 174 199 199

F 578 629 679 781 781

H 70.0 70.0 70.0 82.5 86.0

J 75.5 75.5 75.5 92.0 129

K 60.5 60.5 60.5 76.0 82.5

McKissick Blocks

* Ultimate Load is 4 times the Working Load Limit.

287

McKissick® Tilt-Up Wall Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

On Pages 332-339

High Capacity Snatch Blocks for Tilt-Up Wall Construction

TU-480 SERIES BLOCKS

• Wide Range of Sizes Available: • 30 and 60 Ton Capacity (27 and 54 Tonnes) • 1" to 2-1/4" (25mm to 60mm) Wire Line Size • 16" to 24" (406mm to 610mm) Sheave Diameter • Larger Capacity Blocks available. • Multiple Configurations Available: • Swivel Hook • Swivel Shackle • Tailboard • Upset Shackle • Fixed Shackle • McKissick® Roll-Forged™ Sheaves: • Flame Hardened Grooves • 30 Ton (27 Tonnes) furnished with Roller Bearings • 60 Ton (54 Tonnes) furnished with Tapered Roller Bearings with seals. s k c o l B

l l a W

p U - t l i T

k c i s s i K c M

TU-480 & TU-481 Working Load Limit (t)* 27 27 27 27 27 27 27 27 27 27 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54

Sheave Dia. (mm) 406 406 406 406 406 508 508 508 508 508 457 457 457 457 457 610 610 610 610 610 610 610 610 610 610

Wire Line Size (mm) 25 28 32 35 38 25 28 32 35 38 25 28 32 35 38 25 28 32 35 38 41 44 48 51 57

With Swivel Hook TU-480 Weight TU-480 Each Stock (kg) No. 2108300 102 2108312 102 2108324 102 2108336 102 2108348 102 2108360 109 2108372 109 2108384 109 2108396 109 2108408 109 2108420 177 2108435 177 2108450 177 2108465 177 2108480 177 2108495 204 2108510 204 2108525 204 2108540 204 2108555 204 2108570 204 2108585 204 2108600 204 2108615 204 2108630 204

With Swivel Shackle TU-481 Weight TU-481 Each Stock (kg) No. 2108303 107 2108315 107 2108327 107 2108339 107 2108351 107 2108363 113 2108375 113 2108387 113 2108399 113 2108411 113 2108423 177 2108438 177 2108453 177 2108468 177 2108483 177 2108498 204 2108513 204 2108528 204 2108543 204 2108558 204 2108573 204 2108588 204 2108603 204 2108618 204 2108633 204

* Ultimate Load is 4 times the Working Load Limit.

288

McKissick® Tilt-Up Wall Blocks s k c o l B

l l a W

p U - t l i T

k c i s s i K c M

TU-480 SERIES BLOCKS

High Capacity Snatch Blocks for Tilt-Up Wall Construction TU-482, TU-483 & TU-484 Working Load Limit (t)* 27 27 27 27 27 27 27 27 27 27 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54

Sheave Diameter (mm) 406 406 406 406 406 508 508 508 508 508 457 457 457 457 457 610 610 610 610 610 610 610 610 610 610

Wire Line Size (mm) 25 28 32 35 38 25 28 32 35 38 25 28 32 35 38 25 28 32 35 38 41 44 48 51 57

Tailboard Style TU-482 Weight TU-482 Each Stock (kg) No. 2108306 63.5 2108318 63.5 2108330 63.5 2108342 63.5 2108354 63.5 2108366 70.3 2108378 70.3 2108390 70.3 2108402 70.3 2108414 70.3 2108426 104 2108441 104 2108456 104 2108471 104 2108486 104 2108501 132 2108516 132 2108531 132 2108546 132 2108561 132 2108576 132 2108591 132 2108606 132 2108621 132 2108636 132

With Upset Shackle TU-483 Weight TU-483 Each Stock (kg) No. 2108309 81.6 2108321 81.6 2108333 81.6 2108345 81.6 2108357 81.6 2108369 88.5 2108381 88.5 2108393 88.5 2108405 88.5 2108417 88.5 2108429 154 2108444 154 2108459 154 2108474 154 2108489 154 2108504 181 2108519 181 2108534 181 2108549 181 2108564 181 2108579 181 2108594 181 2108609 181 2108624 181 2108639 181

With Fixed Shackle TU-484 Weight TU-484 Each Stock (kg) No. 2108645 72.6 2108648 72.6 2108651 72.6 2108654 72.6 2108657 72.6 2108660 79.4 2108663 79.4 2108666 79.4 2108669 79.4 2108672 79.4 2108432 132 2108447 132 2108462 132 2108477 132 2108492 132 2108507 159 2108522 159 2108537 159 2108552 159 2108567 159 2108582 159 2108597 159 2108612 159 2108627 159 2108642 159

McKissick Blocks

* Ultimate Load is 4 times the Working Load Limit.

289

680_block.fm Page 25 Saturday, February 4, 2006 3:03 PM

McKissick® Construction Blocks 680 Construction Blocks • • • • •

Wide Range of product available. Capacity: 5 to 100 tons - Larger models available. Sheave sizes: 6" to 24" O.D. Wire Line Sizes: 3/8" to 1-1/4" Equipped with genuine Crosby® forged steel, Quenched and Tempered shackles that contain the patented QUIC-CHECK® markings. • Design Factor of 4 to 1.

• All 680 Series Blocks are furnished standard with Bronze Bushings. • All 680 blocks 16" and larger, are furnished with McKissick® Roll Forged® sheaves with flame hardened grooves. • Sheaves are lubricated through center pin, with a separate lube channel to each bearing. • Single sheave blocks have thimble dead end. • Manufactured by an ISO 9001 and API Q1 Certified facility.

Options Available: • • • •

Roller bearing sheaves Hanger & Bolt Only models available Third party testing with certification Galvanized finish - Most models

With Hanger

With Shackle Bolt Only

SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

290

On Pages 332 - 339

Const_block.fm Page 25 Friday, February 3, 2006 3:25 PM

McKissick® Construction Blocks

“H” Fitting - Block with Hangers Only

McKissick Blocks

“P” Fitting - Block with Bolt Only

NOTE: The outside of attaching plates must be within the indicated load areas. Means must be provided to keep attaching plates equally spaced from the block side plates. Copyright © 2006 The Crosby Group, Inc. All Rights Reserved

“S” Fitting - Blocks with Hanger and Shackles

291

McKissick® Construction Blocks 680 Blocks - "P" Fitting n o i t c u r t s n o C

k c i s s i K c M

"P" Fitting - Blocks with Bolt Only - See Drawing on Page 291 Blocks with Bolt Only Dimensions (mm)

680P

Model No.

680-P Inquiry Stock No.

Working Load No. of Limit Sheaves (t)

Sheave Diam. (mm)

C D 4.5 Tonnes 45.2 45.2 97.0 26.9 97.0 26.9 148 26.9 148 26.9 6.8 Tonnes 45.2 45.2 97.0 15.7 97.0 15.7 148 15.7 148 15.7 9.1 Tonnes 45.2 45.2 45.2 45.2 97.0 22.4 97.0 22.4 97.0 22.4 97.0 22.4 97.0 22.4 148 22.4 148 22.4 148 22.4 148 22.4 200 22.4 200 22.4 13.6 Tonnes 52.0 52.0 52.0 110 31.8 110 31.8 110 31.8 169 31.8 169 31.8 169 31.8 169 31.8 227 31.8 18.1 Tonnes 64.5 19.1 110 19.1 110 19.1 110 19.1 169 19.1 169 19.1 169 19.1 169 19.1

Weight Each (kg.)

58.0 58.0 109 109 161 161

155 206 155 206 155 206

16.0 16.0 16.0 16.0

17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3

51.0 51.0 45.5 45.5 45.5 45.5

31.8 31.8 31.8 31.8 31.8 31.8

51.5 51.5 51.5 51.5

8.6 14.1 15.0 24.5 20.4 34.0

58.0 58.0 109 109 161 161

155 206 155 206 155 206

16.0 16.0 16.0 16.0

17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3

51.0 51.0 45.5 45.5 45.5 45.5

31.8 31.8 31.8 31.8 31.8 31.8

51.5 51.5 51.5 51.5

8.6 14.1 15.0 24.5 20.4 34.0

58.0 58.0 58.0 58.0 109 109 109 109 109 161 161 161 161 213 212.6

206 257 308 359 155 206 257 308 359 206 257 308 359 206 257

16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3

60.5 60.5 60.5 60.5 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5

15.4 21.3 25.9 29.0 18.6 26.3 37 45 52 36.7 52 53 74 47 68

77.0 77.0 77.0 136 136 136 194 194 194 194 252

257 308 359 257 308 359 206 257 308 359 257

19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1

20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

79.0 79.0 79.0 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5

51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0

58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

34.5 41.7 50 52 63 76 47.6 69 826 97 95

103 148 148 148 207 207 207 207

460 308 359 409 257 308 359 409

22.4 22.4 22.4 22.4 22.4 22.4 22.4

24.6 24.6 24.6 24.6 24.6 24.6 24.6

29.0 29.0 29.0 29.0 29.0 29.0 29.0

79.0 71.5 71.5 71.5 71.5 71.5 71.5 71.5

51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0

58.5 58.5 58.5 58.5 58.5 58.5 58.5

92 75 90 108 81 94 116 140

Fr5P

C5S6BP C5S8BP C5D6BP C5D8BP C5T6BP C5T8BP

2101000 2101002 2101010 2101012 2101020 2101022

4.5 4.5 4.5 4.5 4.5 4.5

1 1 2 2 3 3

152 203 152 203 152 203

308 356 375 422 375 422

41.1 41.1 41.1 41.1 41.1 41.1

C7S6BP C7S8BP C7D6BP C7D8BP C7T6BP C7T8BP

2101050 2101052 2101060 2101062 2101070 2101072

6.8 6.8 6.8 6.8 6.8 6.8

1 1 2 2 3 3

152 203 152 203 152 203

308 356 375 422 375 422

41.1 41.1 41.1 41.1 41.1 41.1

C10S8BP C10S10BP C10S12BP C10S14BP C10D6BP C10D8BP C10D10BP C10D12BP C10D14BP C10T8BP C10T10BP C10T12BP C10T14BP C10Q8BP C10Q10B

2101100 2101102 2101104 2101106 2101110 2101112 2101114 2101116 2101118 2101120 2101122 2101124 2101126 2101130 2101132

9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1

1 1 1 1 2 2 2 2 2 3 3 3 3 4 4

203 254 305 356 152 203 254 305 356 203 254 305 356 203 254

384 435 483 536 399 443 494 541 595 443 494 541 595 443 494

54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

C15S10B C15S12BP C15S14SP C15D10BP C15D12BP C15D14BP C15T8BP C15T10BP C15T12BP C15T14BP C15Q10BP

2101170 2101172 2101174 2101180 2101182 2101184 2101190 2101192 2101194 2101196 2101200

13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6

1 1 1 2 2 2 3 3 3 3 4

254 305 356 254 305 356 203 254 305 356 254

487 535 586 564 611 662 513 564 611 662 564

73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0

C20S18BP C20D12BP C20D14BP C20D16BP C20T10BP C20T12BP C20T14BP C20T16BP

2101244 2101250 2101252 2101254 2101260 2101262 2101264 2101266

18.1 18.1 18.1 18.1 18.1 18.1 18.1 18.1

1 2 2 2 3 3 3 3

457 305 356 406 254 305 356 406

708 703 724 781 629 678 724 781

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

Fr7.5P

Fr15P

292

McKissick® Construction Blocks Blocks with Bolt Only Dimensions (mm)

680P

Model No. C20Q8BP C20Q10BP C20Q12BP C20Q14BP

680-P Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2101270 18.1 4 2101272 18.1 4 2101274 18.1 4 2101276 18.1 4

C25S18BP C25D12BP C25D14BP C25D16BP C25T10BP C25T12BP C25T14BP C25T16BP C25Q08BP C25Q10BP C25Q12BP C25Q14BP

2101314 2101320 2101322 2101324 2101330 2101332 2101334 2101336 2101340 2101342 2101344 2101346

22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7

C30D12BP C30D14BP C30D16BP C30D18BP C30T10BP C30T12BP C30T14BP C30T16BP C30Q10BP C30Q12BP C30Q14BP C30Q16BP

2101390 2101392 2101394 2101396 2101400 2101402 2101404 2101406 2101410 2101412 2101414 2101416

C35D12BP C35D14BP C35D16BP C35D18BP C35T10BP C35T12BP C35T14BP C35T16BP C35Q10BP C35Q12BP C35Q14BP C35Q16BP

Sheave Diam. (mm) 203 254 305 356

A 573 629 678 724

B 76.0 76.0 76.0 76.0

1 2 2 2 3 3 3 3 4 4 4 4

457 305 356 406 254 305 356 406 203 254 305 356

708 703 724 781 629 678 724 781 573 629 678 724

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2

2 2 2 2 3 3 3 3 4 4 4 4

305 356 406 457 254 305 356 406 254 305 356 406

765 813 873 917 718 765 813 873 917 765 813 873

108 108 108 108 108 108 108 108 108 108 108 108

2101450 2101452 2101454 2101456 2101460 2101462 2101464 2101466 2101470 2101472 2101474 2101476

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

2 2 2 2 3 3 3 3 4 4 4 4

406 406 406 457 254 305 356 406 254 305 356 406

765 813 873 917 718 765 813 873 917 765 813 873

108 108 108 108 108 108 108 108 108 108 108 108

C40D18BP C40D20BP C40D24BP C40T14BP C40T16BP C40T18BP C40T20BP C40Q12BP C40Q14BP C40Q16BP C40Q18BP

2101512 2101514 2101516 2101520 2101522 2101524 2101526 2101530 2101532 2101534 2101536

36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

940 972 1073 870 927 940 972 822 870 927 940

108 108 108 127 127 108 108 127 127 127 108

C45D18BP C45D20BP C45D24BP C45T14BP C45T16BP C45T18BP C45T20BP C45Q12BP C45Q14BP C45Q16BP C45Q18BP

2101582 2101584 2101586 2101590 2101592 2101594 2101596 2101600 2101602 2101604 2101606

40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

940 972 1073 870 927 940 972 822 870 927 940

108 108 108 127 127 108 108 127 127 127 108

C50D20BP C50D24BP C50T18BP

2101640 2101642 2101650

45.4 45.4 45.4

2 2 3

508 610 457

1067 1168 1035

140 140 140

C D 227 19.1 227 19.1 227 19.1 227 19.1 22.7 Tonnes 64.5 12.7 110 12.7 110 12.7 110 12.7 169 12.7 169 12.7 169 12.7 169 12.7 227 12.7 227 12.7 227 12.7 227 12.7 27.2 Tonnes 136 52.3 136 52.3 136 52.3 136 52.3 169 52.3 169 52.3 169 52.3 169 52.3 227 52.3 227 52.3 227 52.3 227 52.3 31.8 Tonnes 136 42.9 136 42.9 136 42.9 136 42.9 169 42.9 169 42.9 169 42.9 169 42.9 227 42.9 227 42.9 227 42.9 227 42.9 36.3 Tonnes 148 31.8 148 31.8 148 31.8 169 31.8 169 31.8 213 31.8 213 31.8 227 31.8 227 31.8 227 31.8 288 31.8 40.8 Tonnes 148 25.4 148 25.4 148 25.4 169 25.4 169 25.4 213 25.4 213 25.4 227 25.4 227 25.4 227 25.4 288 25.4 45.4 Tonnes 148 44.5 148 44.5 213 44.5

E 265 265 265 265

F 206 257 308 359

G 22.4 22.4 22.4 22.4

H 24.6 24.6 24.6 24.6

I 29.0 29.0 29.0 29.0

J 71.5 71.5 71.5 71.5

K 51.0 51.0 51.0 51.0

X 58.5 58.5 58.5 58.5

Weight Each (kg.) 78 99 119 142

103 148 148 148 207 207 207 207 265 265 265 265

460 308 359 409 257 308 359 409 206 257 308 359

22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4

24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6

29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0

79.0 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5 71.5

51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0

58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

92 76 90 108 81 94 115 140 76 101 119 142

174 174 174 174 207 207 207 207 265 265 265 265

308 359 409 460 257 308 359 409 257 308 359 409

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

107 107 107 107 107 107 107 107 107 107 107 107

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

71.0 71.0 71.0 71.0 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

86 103 121 156 97 108 128 156 116 132 155 189

174 174 174 174 207 207 207 207 265 265 265 265

308 359 409 460 257 308 359 409 257 308 359 409

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

107 107 107 107 107 107 107 107 107 107 107 107

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

71.0 71.0 71.0 71.0 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

86 102 121 156 97 108 128 156 116 132 155 189

199 199 199 207 207 264 264 265 265 265 339

460 511 613 359 409 460 511 308 359 409 460

28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

107 107 107 107 107 107 107 107 107 107 107

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

217 257 338 136 163 264 313 144 164 195 310

199 199 199 207 207 264 264 265 265 265 339

460 511 613 359 409 460 511 308 359 409 460

28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

107 107 107 107 107 107 107 107 107 107 107

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

217 257 338 136 163 264 313 144 164 195 310

199 199 264

511 613 460

31.8 31.8 31.8

35.1 35.1 35.1

41.1 41.1 41.1

124 124 124

89.0 89.0 89.0

84.0 84.0 73.5

279 362 271

Fr25P

Fr30P

Fr40P

Fr45P

Fr50P

293

McKissick Blocks

Fr35P

McKissick® Construction Blocks Blocks with Bolt Only Dimensions (mm)

680P

Model No. C50T20BP C50T24BP C50Q16BP C50Q18BP

680-P Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2101652 45.4 3 2101654 45.4 3 2101660 45.4 4 2101662 45.4 4

C55D20BP C55D24BP C55T18BP C55T20BP C55T24BP C55Q16BP C55Q18BP

2101700 2101702 2101710 2101712 2101714 2101720 2101722

49.9 49.9 49.9 49.9 49.9 49.9 49.9

C60T18BP C60T20BP C60T24BP C60Q18BP C60Q20BP C60Q24BP

2101760 2101762 2101764 2101770 2101772 2101774

C65T18BP C65T20BP C65T24BP C65Q18BP C65Q20BP C65Q24BP

Sheave Diam. (mm) 508 610 406 457

A 1067 1168 981 1035

B 140 140 140 140

2 2 3 3 3 4 4

508 610 457 508 610 406 457

1067 1168 1035 1067 1168 981 1035

140 140 140 140 140 140 140

54.4 54.4 54.4 54.4 54.4 54.4

3 3 3 4 4 4

457 508 610 457 508 610

1035 1067 1168 1035 1067 1168

140 140 140 140 140 140

2101810 2101812 2101814 2101820 2101822 2101824

59.0 59.0 59.0 59.0 59.0 59.0

3 3 3 4 4 4

457 508 610 457 508 610

1035 1067 1168 1035 1067 1168

140 140 140 140 140 140

C70T20BP C70Q20BP C70Q24BP C70QN20BP C70QN24BP

2101830 2101840 2101842 2101850 2101852

63 63 63 63 63

3 4 4 5 5

508 508 610 508 610

1175 1175 1276 1175 1276

178 178 178 178 178

C80T20BP C80Q20BP C80Q24BP C80QN20BP C80QN24BP

2101860 2101870 2101872 2101880 2101882

72 72 72 72 72

3 4 4 5 5

508 508 610 508 610

1175 1175 1276 1175 1276

178 178 178 178 178

C90Q20BP C90Q24BP C90QN20BP C90QN24BP

2101920 2101922 2101930 2101932

81 81 81 81

4 4 5 5

508 610 508 610

1175 1276 1175 1276

191 191 191 191

C100QN20BP C100QN24BP C100SX20BP C100SX24BP

2101970 2101972 2101980 2101982

90 90 90 90

5 5 6 6

508 610 508 610

1175 1276 1175 1276

191 191 191 191

C D 213 44.5 213 44.5 288 44.5 288 44.5 49.9 Tonnes 148 39.6 148 39.6 213 39.6 213 39.6 213 39.6 288 39.6 288 39.6 54.4 Tonnes 213 35.1 213 35.1 213 35.1 288 35.1 288 35.1 288 35.1 59 Tonnes 213 30.2 213 30.2 213 30.2 288 30.2 288 30.2 288 30.2 63 Tonnes 232 44.5 287 44.5 287 44.5 232 44.5 232 44.5 72 Tonnes 232 36.6 287 36.6 287 36.6 232 36.6 232 36.6 81 Tonnes 287 30.2 287 30.2 232 30.2 232 30.2 90 Tonnes 232 25.4 232 25.4 287 25.4 287 25.4

E 264 264 339 339

F 511 613 409 460

G 31.8 31.8 31.8 31.8

H 35.1 35.1 35.1 35.1

I 41.1 41.1 41.1 41.1

J 124 124 124 124

K 89.0 89.0 89.0 89.0

X 73.5 73.5 73.5 73.5

Weight Each (kg.) 322 419 271 339

199 199 264 264 264 339 339

511 613 460 511 613 409 460

31.8 31.8 31.8 31.8 31.8 31.8 31.8

35.1 35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1

124 124 124 124 124 124 124

89.0 89.0 89.0 89.0 89.0 89.0 89.0

84.0 84.0 73.5 73.5 73.5 73.5 73.5

279 362 271 322 419 271 339

264 264 264 339 339 339

460 511 613 460 511 613

31.8 31.8 31.8 31.8 31.8 31.8

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

124 124 124 124 124 124

89.0 89.0 89.0 89.0 89.0 89.0

73.5 73.5 73.5 73.5 73.5 73.5

271 322 419 339 407 503

264 264 264 339 339 339

460 511 613 460 511 613

31.8 31.8 31.8 31.8 31.8 31.8

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

124 124 124 124 124 124

89.0 89.0 89.0 89.0 89.0 89.0

73.5 73.5 73.5 73.5 73.5 73.5

271 322 419 339 407 503

283 338 338 463 463

511 511 613 511 613

35.1 35.1 35.1 35.1 35.1

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

142 142 142 142 142

102 102 102 102 102

3.30 2.90 2.90 3.30 3.30

404 424 572 592 778

283 338 338 463 463

511 511 613 511 613

35.1 35.1 35.1 35.1 35.1

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

142 142 142 142 142

102 102 102 102 102

3.30 2.90 2.90 3.30 3.30

404 454 572 592 778

338 338 463 463

511 613 511 613

35.1 35.1 35.1 35.1

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

142 142 142 142

102 102 102 102

2.90 2.90 3.30 3.30

481 644 592 805

463 463 518 518

511 613 511 613

35.1 35.1 35.1 35.1

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

142 142 142 142

102 102 102 102

3.30 3.30 2.90 2.90

592 805 619 841

Fr5 P

Fr60P

Fr65P

Fr70P

Fr80P

Fr90P

Fr10 P

294

McKissick®Construction Blocks 680 Blocks - "H" Fitting n o i t c u r t s n o C

k c i s s i K c M

"H" Fitting - Blocks with Hanger - See Drawing on Page 291 Blocks with Hangers - Dimensions (mm)

680H

Model No.

680-H Inquiry Stock No.

Working Load No. of Limit Sheaves (t)

Sheave Diam. (mm)

F G 4.5 Tonnes 155 206 155 16.0 206 16.0 155 16.0 206 16.0 6.8 Tonnes 155 206 155 16.0 206 16.0 155 16.0 206 16.0 9.1 Tonnes 206 257 308 359 155 16.0 206 16.0 257 16.0 308 16.0 359 16.0 206 16.0 257 16.0 308 16.0 359 16.0 206 16.0 257 16.0 13.6 Tonnes 257 308 359 257 19.1 308 19.1 359 19.1 206 19.1 257 19.1 308 19.1 359 19.1 257 19.1 18.1 Tonnes 460 308 22.4 359 22.4 409 22.4 257 22.4 308 22.4 359 22.4 409 22.4

Weight Each (kg.)

17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3

41.4 41.4 41.4 41.4 41.4 41.4

31.8 31.8 31.8 31.8 31.8 31.8

26.9 26.9 26.9 26.9 26.9 26.9

29.5 29.5 29.5 29.5 29.5 29.5

82.5 82.5 82.5 82.5 82.5 82.5

47.2 47.2 57.0 57.0 57.0 57.0

51.5 51.5 51.5 51.5

10.0 15.4 16.8 26.3 23.1 36.7

17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3

41.4 41.4 41.4 41.4 41.4 41.4

31.8 31.8 31.8 31.8 31.8 31.8

26.9 26.9 26.9 26.9 26.9 26.9

29.5 29.5 29.5 29.5 29.5 29.5

82.5 82.5 82.5 82.5 82.5 82.5

47.2 47.2 57.0 57.0 57.0 57.0

51.5 51.5 51.5 51.5

10.0 15.4 16.8 26.3 23.1 36.7

17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3

47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8

35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1

33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

102 102 102 102 102 102 102 102 102 102 102 102 102 102 102

53.0 53.0 53.0 53.0 68.0 68.0 68.0 68.0 68.0 88.0 88.0 88.0 88.0 92.0 92.0

51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5

17.7 23.6 28.1 31.3 20.0 29.5 40.4 48.1 55 40.8 56 67 78 52 73

20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6

25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

66.5 66.5 66.5 66.5 66.5 66.5 66.5 66.5 66.5 66.5 66.5

47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8

39.6 39.6 39.6 39.6 39.6 39.6 39.6 39.6 39.6 39.6 39.6

54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

140 140 140 140 140 140 140 140 140 140 140

71.5 71.5 71.5 86.5 86.5 86.5 98.5 98.5 98.5 98.5 98.5

58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

39.0 46.3 55 59 70 83 58 79 93 107 98

24.6 24.6 24.6 24.6 24.6 24.6 24.6

29.0 29.0 29.0 29.0 29.0 29.0 29.0

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

140 140 140 140 140 140 140 140

71.0 84.0 84.0 84.0 98.5 98.5 98.5 98.5

58.5 58.5 58.5 58.5 58.5 58.5 58.5

98 83 97 115 91 104 125 149

Fr5H

C5S6BH C5S8BH C5D6BH C5D8BH C5T6BH C5T8BH

2102000 2102002 2102010 2102012 2102020 2102022

4.5 4.5 4.5 4.5 4.5 4.5

1 1 2 2 3 3

152 203 152 203 152 203

381 429 448 495 448 495

58.0 58.0 109 109 161 161

C7S6BH C7S8BH C7D6BH C7D8BH C7T6BH C7T8BH

2102050 2102052 2102060 2102062 2102070 2102072

6.8 6.8 6.8 6.8 6.8 6.8

1 1 2 2 3 3

152 203 152 203 152 203

381 429 448 495 448 495

58.0 58.0 109 109 161 161

C10S8BH C10S10BH C10S12BH C10S14BH C10D6BH C10D8BH C10D10BH C10D12BH C10D14BH C10T8BH C10T10BH C10T12BH C10T14BH C10Q8BH C10Q10BH

2102100 2102102 2102104 2102106 2102110 2102112 2102114 2102116 2102118 2102120 2102122 2102124 2102126 2102130 2102132

9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1

1 1 1 1 2 2 2 2 2 3 3 3 3 4 4

203 254 305 356 152 203 254 305 356 203 254 305 356 203 254

467 518 565 619 481 526 576 624 678 526 576 624 678 526 576

58.0 58.0 58.0 58.0 109 109 109 109 109 161 161 161 161 213 213

C15S10BH C15S12BH C15S14BH C15D10BH C15D12BH C15D14BH C15T8BH C15T10BH C15T12BH C15T14BH C15Q10BH

2102170 2102172 2102174 2102180 2102182 2102184 2102190 2102192 2102194 2102196 2102200

13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6

1 1 1 2 2 2 3 3 3 3 4

254 305 356 254 305 356 203 254 305 356 254

602 649 700 678 725 776 627 678 725 776 678

77.0 77.0 77.0 136 136 136 194 194 194 194 252

C20S18BH C20D12BH C20D14BH C20D16BH C20T10BH C20T12BH C20T14BH C20T16BH

2102244 2102250 2102252 2102254 2102260 2102262 2102264 2102266

18.1 18.1 18.1 18.1 18.1 18.1 18.1 18.1

1 2 2 2 3 3 3 3

457 305 356 406 254 305 356 406

819 814 835 893 740 789 835 892

103 148 148 148 207 207 207 207

Fr7.5H

Fr10H

Fr15H

Fr20H

295

McKissick Blocks

s k c o l B

McKissick®Construction Blocks Blocks with Hangers - Dimensions (mm)

680H

Model No. C20Q8BH C20Q10BH C20Q12BH C20Q14BH

680-H Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2102270 18.1 4 2102272 18.1 4 2102274 18.1 4 2102276 18.1 4

C25S18BH C25D12BH C25D14BH C25D16BH C25T10BH C25T12BH C25T14BH C25T16BH C25Q8BH C25Q10BH C25Q12BH C25Q14BH

2102314 2102320 2102322 2102324 2102330 2102332 2102334 2102336 2102340 2102342 2102344 2102346

22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7

C30D12BH C30D14BH C30D16BH C30D18BH C30T10BH C30T12BH C30T14BH C30T16BH C30Q10BH C30Q12BH C30Q14BH C30Q16BH

2102390 2102392 2102394 2102396 2102400 2102402 2102404 2102406 2102410 2102412 2102414 2102416

C35D12BH C35D14BH C35D16BH C35D18BH C35T10BH C35T12BH C35T14BH C35T16BH C35Q10BH C35Q12BH C35Q14BH C35Q16BH

Sheave Diam. (mm) 203 254 305 356

A 684 740 789 835

E 265 265 265 265

1 2 2 2 3 3 3 3 4 4 4 4

457 305 356 406 254 305 356 406 203 254 305 356

819 814 835 893 740 789 835 892 684 740 789 835

103 148 148 148 207 207 207 207 265 265 265 265

27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2

2 2 2 2 3 3 3 3 4 4 4 4

305 356 406 457 254 305 356 406 254 305 356 406

899 946 1006 1051 851 899 946 1006 1051 899 946 1006

174 174 174 174 207 207 207 207 265 265 265 265

2102450 2102452 2102454 2102456 2102460 2102462 2102464 2102466 2102470 2102472 2102474 2102476

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

2 2 2 2 3 3 3 3 4 4 4 4

305 356 406 457 254 305 356 406 254 305 356 406

899 946 1006 1051 851 899 946 1006 1051 899 946 1006

174 174 174 174 207 207 207 207 265 265 265 265

C40D18BH C40D20BH C40D24BH C40T14BH C40T16BH C40T18BH C40T20BH C40Q12BH C40Q14BH C40Q16BH C40Q18BH

2102512 2102514 2102516 2102520 2102522 2102524 2102526 2102530 2102532 2102534 2102536

36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

1089 1121 1222 1019 1076 1089 1121 972 1019 1076 1089

199 199 199 207 207 264 264 265 265 265 339

C45D18BH C45D20BH C45D24BH C45T14BH C45T16BH C45T18BH C45T20BH C45Q12BH C45Q14BH C45Q16BH C45Q18BH

2102582 2102584 2102586 2102590 2102592 2102594 2102596 2102600 2102602 2102604 2102606

40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

1089 1121 1222 1019 1076 1089 1121 972 1019 1076 1089

199 199 199 207 207 264 264 265 265 265 339

C50D20BH C50D24BH C50T18BH

2102640 2102642 2102650

45.4 45.4 45.4

2 2 3

508 610 457

1238 1340 1207

199 199 264

F G 206 22.4 257 22.4 308 22.4 359 22.4 22.7 Tonnes 460 308 22.4 359 22.4 409 22.4 257 22.4 308 22.4 359 22.4 409 22.4 206 22.4 257 22.4 308 22.4 359 22.4 27.2 Tonnes 308 25.4 359 25.4 409 25.4 460 25.4 257 25.4 308 25.4 359 25.4 409 25.4 257 25.4 308 25.4 359 25.4 409 25.4 31.8 Tonnes 308 25.4 359 25.4 409 25.4 460 25.4 257 25.4 308 25.4 359 25.4 409 25.4 257 25.4 308 25.4 359 25.4 409 25.4 36.3 Tonnes 460 28.7 511 28.7 613 28.7 359 28.7 409 28.7 460 28.7 511 28.7 308 28.7 359 28.7 409 28.7 460 28.7 40.8 Tonnes 460 28.7 511 28.7 613 28.7 359 28.7 409 28.7 460 28.7 511 28.7 308 28.7 359 28.7 409 28.7 460 28.7 45.4 Tonnes 511 31.8 613 31.8 460 31.8

H 24.6 24.6 24.6 24.6

I 29.0 29.0 29.0 29.0

L 63.5 63.5 63.5 63.5

M 47.8 47.8 47.8 47.8

N 42.9 42.9 42.9 42.9

O 54.0 54.0 54.0 54.0

P 140 140 140 140

Q 98.5 98.5 98.5 98.5

X 58.5 58.5 58.5 58.5

Weight Each (kg.) 89 112 130 153

24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6

29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

140 140 140 140 140 140 140 140 140 140 140 140

71.0 84.0 84.0 84.0 98.5 98.5 98.5 98.5 98.5 98.5 98.5 98.5

58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

98 83 97 115 91 104 125 149 89 112 130 153

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0

178 178 178 178 178 178 178 178 178 178 178 178

97.5 97.5 97.5 97.5 108 108 108 108 108 108 108 108

71.0 71.0 71.0 71.0 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

102 118 137 172 115 127 146 174 139 155 178 213

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0

178 178 178 178 178 178 178 178 178 178 178 178

97.5 97.5 97.5 97.5 108 108 108 108 108 108 108 108

71.0 71.0 71.0 71.0 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

102 118 137 172 115 127 146 174 139 155 178 213

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0

52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

184 184 184 203 203 184 184 203 203 203 184

106 106 106 114 114 114 114 133 133 133 114

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

239 280 361 161 189 293 343 176 196 227 347

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0

73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0 73.0

52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

184 184 184 203 203 184 184 203 203 203 184

106 106 106 114 114 114 114 133 133 133 114

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

239 280 361 161 189 293 343 176 196 227 347

35.1 35.1 35.1

41.1 41.1 41.1

89.0 89.0 89.0

82.5 82.5 82.5

58.5 58.5 58.5

76.0 76.0 76.0

229 229 229

116 116 139

84.0 84.0 73.5

312 395 318

Fr25H

Fr30H

Fr35H

Fr40H

Fr45H

Fr50H

296

McKissick®Construction Blocks Blocks with Hangers - Dimensions (mm)

680H

Model No. C50T20BH C50T24BH C50Q16BH C50Q18BH

680-H Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2102652 45.4 3 2102654 45.4 3 2102660 45.4 4 2102662 45.4 4

C55D20BH C55D24BH C55T18BH C55T20BH C55T24BH C55Q16BH C55Q18BH

2102700 2102702 2102710 2102712 2102714 2102720 2102722

49.9 49.9 49.9 49.9 49.9 49.9 49.9

C60T18BH C60T20BH C60T24BH C60Q18BH C60Q20BH C60Q24BH

2102760 2102762 2102764 2102770 2102772 2102774

C65T18BH C65T20BH C65T24BH C65Q18BH C65Q20BH C65Q24BH

Sheave Diam. (mm) 508 610 406 457

A 1238 1340 1153 1207

E 264 264 339 339

2 2 3 3 3 4 4

508 610 457 508 610 406 457

1238 1340 1207 1238 1340 1153 1194

199 199 264 264 264 339 339

54.4 54.4 54.4 54.4 54.4 54.4

3 3 3 4 4 4

457 508 610 457 508 610

1216 1248 1349 1216 1248 1349

264 264 264 339 339 339

2102810 2102812 2102814 2102820 2102822 2102824

59.0 59.0 59.0 59.0 59.0 59.0

3 3 3 4 4 4

457 508 610 457 508 610

1216 1248 1349 1216 1248 1349

264 264 264 339 339 339

C70T20BH C70Q20BH C70Q24BH C70QN20BH C70QN24BH

2102830 2102840 2102842 2102850 2102852

63 63 63 63 63

3 4 4 5 5

508 508 610 508 610

1407 1407 1508 1407 1508

283 338 338 463 463

C80T20BH C80Q20BH C80Q24BH C80QN20BH C80QN24BH

2102860 2102870 2102872 2102880 2102882

72 72 72 72 72

3 4 4 5 5

508 508 610 508 610

1407 1407 1508 1407 1508

283 338 338 463 463

C90Q20BH C90Q24BH C90QN20BH C90QN24BH

2102920 2102922 2102930 2102932

81 81 81 81

4 4 5 5

508 610 508 610

1407 1508 1407 1508

351 351 463 463

C100QN20BH C100QN24BH C100SX20BH C100SX24BH

2102970 2102972 2102980 2102982

90 90 90 90

5 5 6 6

508 610 508 610

1407 1508 1407 1508

463 463 518 518

Fr5 H

Fr60H

F G 511 31.8 613 31.8 409 31.8 460 31.8 49.9 Tonnes 511 31.8 613 31.8 460 31.8 511 31.8 613 31.8 409 31.8 460 31.8 54.4 Tonnes 460 31.8 511 31.8 613 31.8 460 31.8 511 31.8 613 31.8 59 Tonnes 460 31.8 511 31.8 613 31.8 460 31.8 511 31.8 613 31.8 63 Tonnes 511 35.1 511 35.1 613 35.1 511 35.1 613 35.1 72 Tonnes 511 35.1 511 35.1 613 35.1 511 35.1 613 35.1 81 Tonnes 511 35.1 613 35.1 511 35.1 613 35.1 90 Tonnes 511 35.1 613 35.1 511 35.1 613 35.1

H 35.1 35.1 35.1 35.1

I 41.1 41.1 41.1 41.1

L 89.0 89.0 89.0 89.0

M 82.5 82.5 82.5 82.5

N 58.5 58.5 58.5 58.5

O 76.0 76.0 76.0 76.0

P 229 229 229 229

Q 139 139 149 149

X 73.5 73.5 73.5 73.5

Weight Each (kg.) 368 465 330 398

35.1 35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1

89.0 89.0 89.0 89.0 89.0 89.0 89.0

82.5 82.5 82.5 82.5 82.5 82.5 82.5

58.5 58.5 58.5 58.5 58.5 58.5 58.5

76.0 76.0 76.0 76.0 76.0 76.0 76.0

229 229 229 229 229 229 229

116 116 139 139 139 149 149

84.0 84.0 73.5 73.5 73.5 73.5 73.5

312 395 318 368 465 330 398

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

89.0 89.0 89.0 89.0 89.0 89.0

92.0 92.0 92.0 92.0 92.0 92.0

58.5 58.5 58.5 58.5 58.5 58.5

76.0 76.0 76.0 76.0 76.0 76.0

229 229 229 229 229 229

139 139 139 149 149 149

73.5 73.5 73.5 73.5 73.5 73.5

318 368 465 398 466 562

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

89.0 89.0 89.0 89.0 89.0 89.0

92.0 92.0 92.0 92.0 92.0 92.0

58.5 58.5 58.5 58.5 58.5 58.5

76.0 76.0 76.0 76.0 76.0 76.0

229 229 229 229 229 229

139 139 139 149 149 149

73.5 73.5 73.5 73.5 73.5 73.5

318 368 465 398 466 562

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

114 114 114 114 114

117 117 117 117 117

71.4 71.4 71.4 71.4 71.4

95.3 95.3 95.3 95.3 95.3

292 292 292 292 292

163 184 184 163 163

83.8 73.7 73.7 83.8 83.8

485 515 662 676 862

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

114 114 114 114 114

117 117 117 117 117

71.4 71.4 71.4 71.4 71.4

95.3 95.3 95.3 95.3 95.3

292 292 292 292 292

163 184 184 163 163

83.8 73.7 73.7 83.8 83.8

485 544 662 676 862

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

114 114 114 114

117 117 117 117

71.4 71.4 71.4 71.4

95.3 95.3 95.3 95.3

292 292 292 292

176 176 154 154

73.7 73.7 83.8 83.8

572 735 676 889

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

114 114 114 114

117 117 117 117

71.4 71.4 71.4 71.4

95.3 95.3 95.3 95.3

292 292 292 292

154 154 176 176

83.8 83.8 73.7 73.7

676 889 710 932

Fr65H

Fr70H

Fr80H

Fr10 H

297

McKissick Blocks

Fr90H

McKissick®Construction Blocks 680 Blocks - "S" Fitting B

n o i t c u r t s n o C

k c i s s i K c M

"S" Fitting - Blocks with Hanger & Shackle - See Drawing on Page 291 Blocks with Hanger and Shackle - Dimensions (mm)

680S

Model No.

680-S Inquiry Stock No.

Working Load No. of Limit Sheaves (t)

Sheave Diam. (mm)

F G 4.5 Tonnes 155 -206 -155 16.0 206 16.0 155 16.0 206 16.0 6.8 Tonnes 155 -206 -155 16.0 206 16.0 155 16.0 206 16.0 9.1 Tonnes 206 -257 -308 -359 -155 16.0 206 16.0 257 16.0 308 16.0 359 16.0 206 16.0 257 16.0 308 16.0 359 16.0 206 16.0 257 16.0 13.6 Tonnes 257 -308 -359 -257 19.1 308 19.1 359 19.1 206 19.1 257 19.1 308 19.1 359 19.1 257 19.1 18.1 Tonnes 460 -308 22.4 359 22.4 409 22.4 257 22.4 308 22.4 359 22.4 409 22.4

Weight Each (kg.)

--17.5 17.5 17.5 17.5

--21.3 21.3 21.3 21.3

97.0 97.0 97.0 97.0 97.0 97.0

65.0 65.0 65.0 65.0 65.0 65.0

29.0 29.0 29.0 29.0 29.0 29.0

22.4 22.4 22.4 22.4 22.4 22.4

24.6 24.6 24.6 24.6 24.6 24.6

--51.5 51.5 51.5 51.5

11.3 16.8 18.1 27.7 24.5 38.1

--17.5 17.5 17.5 17.5

--21.3 21.3 21.3 21.3

97.0 97.0 97.0 97.0 97.0 97.0

65.0 65.0 65.0 65.0 65.0 65.0

29.0 29.0 29.0 29.0 29.0 29.0

22.4 22.4 22.4 22.4 22.4 22.4

24.6 24.6 24.6 24.6 24.6 24.6

--51.5 51.5 51.5 51.5

11.3 16.8 18.1 27.7 24.5 38.1

----17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

----21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3 21.3

124 124 124 124 124 124 124 124 124 124 124 124 124 124 124

89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7 28.7

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

----51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5

21.3 27.2 31.8 34.9 23.6 33.1 44.0 52 59 44.0 60 70 81 56 77

---20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6

---25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4

152 152 152 152 152 152 152 152 152 152 152

105 105 105 105 105 105 105 105 105 105 105

46.0 46.0 46.0 46.0 46.0 46.0 46.0 46.0 46.0 46.0 46.0

35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

---58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

46.3 54 62 67 77 91 65 86 100 114 105

-24.6 24.6 24.6 24.6 24.6 24.6 24.6

-29.0 29.0 29.0 29.0 29.0 29.0 29.0

167 167 167 167 167 167 167 167

119 119 119 119 119 119 119 119

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1

-58.5 58.5 58.5 58.5 58.5 58.5 58.5

107 92 107 125 100 113 134 159

Fr5S

C5S6BS C5S8BS C5D6BS C5D8BS C5T6BS C5T8BS

2103000 2103002 2103010 2103012 2103020 2103022

4.5 4.5 4.5 4.5 4.5 4.5

1 1 2 2 3 3

152 203 152 203 152 203

471 519 538 586 538 586

58.0 58.0 109 109 161 161

C7S6BS C7S8BS C7D6BS C7D8BS C7T6BS C7T8BS

2103050 2103052 2103060 2103062 2103070 2103072

6.8 6.8 6.8 6.8 6.8 6.8

1 1 2 2 3 3

152 203 152 203 152 203

471 519 538 586 538 586

58.0 58.0 109 109 161 161

C10S8BS C10S10BS C10S12BS C10S14BS C10D6BS C10D8BS C10D10BS C10D12BS C10D14BS C10T8BS C10T10BS C10T12BS C10T14BS C10Q8BS C10Q10BS

2103100 2103102 2103104 2103106 2103110 2103112 2103114 2103116 2103118 2103120 2103122 2103124 2103126 2103130 2103132

9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1

1 1 1 1 2 2 2 2 2 3 3 3 3 4 4

203 254 305 356 152 203 254 305 356 203 254 305 356 203 254

587 638 686 740 602 646 697 744 799 646 697 744 799 646 697

58.0 58.0 58.0 58.0 109 109 109 109 109 161 161 161 161 213 213

C15S10BS C15S12BS C15S14BS C15D10BS C15D12BS C15D14BS C15T8BS C15T10BS C15T12BS C15T14BS C15Q10BS

2103170 2103172 2103174 2103180 2103182 2103184 2103190 2103192 2103194 2103196 2103200

13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6

1 1 1 2 2 2 3 3 3 3 4

254 305 356 254 305 356 203 254 305 356 254

744 792 843 821 868 919 770 821 868 919 821

77.0 77.0 77.0 136 136 136 194 194 194 194 252

C20S18BS C20D12BS C20D14BS C20D16BS C20T10BS C20T12BS C20T14BS C20T16BS

2103244 2103250 2103252 2103254 2103260 2103262 2103264 2103266

18.1 18.1 18.1 18.1 18.1 18.1 18.1 18.1

1 2 2 2 3 3 3 3

457 305 356 406 254 305 356 406

979 975 995 1053 900 949 995 1053

103 148 148 148 207 207 207 207

Fr7.5S

Fr10S

Fr15S

Fr20S

298

McKissick®Construction Blocks Blocks with Hanger and Shackle - Dimensions (mm)

680S

Model No. C20Q8BS C20Q10BS C20Q12BS C20Q14BS

680-S Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2103270 18.1 4 2103272 18.1 4 2103274 18.1 4 2103276 18.1 4

C25S18BS C25D12BS C25D14BS C25D16BS C25T10BS C25T12BS C25T14BS C25T16BS C25Q8BS C25Q10BS C25Q12BS C25Q14BS

2103314 2103320 2103322 2103324 2103330 2103332 2103334 2103336 2103340 2103342 2103344 2103346

22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7 22.7

C30D12BS C30D14BS C30D16BS C30D18BS C30T10BS C30T12BS C30T14BS C30T16BS C30Q10BS C30Q12BS C30Q14BS C30Q16BS

2103390 2103392 2103394 2103396 2103400 2103402 2103404 2103406 2103410 2103412 2103414 2103416

C35D12BS C35D14BS C35D16BS C35D18BS C35T10BS C35T12BS C35T14BS C35T16BS C35Q10BS C35Q12BS C35Q14BS C35Q16BS

Sheave Diam. (mm) 203 254 305 356

A 845 900 949 995

E 265 265 265 265

1 2 2 2 3 3 3 3 4 4 4 4

457 305 356 406 254 305 356 406 203 254 305 356

979 975 995 1053 900 949 995 1053 845 900 949 995

103 148 148 148 207 207 207 207 265 265 265 265

27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2 27.2

2 2 2 2 3 3 3 3 4 4 4 4

305 356 406 457 254 305 356 406 254 305 356 406

1043 1091 1151 1195 995 1043 1091 1158 1195 1043 1091 1151

174 174 174 174 207 207 207 207 265 265 265 265

2103450 2103452 2103454 2103456 2103460 2103462 2103464 2103466 2103470 2103472 2103474 2103476

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

2 2 2 2 3 3 3 3 4 4 4 4

305 356 406 457 254 305 356 406 254 305 356 406

1043 1091 1151 1195 995 1043 1091 1151 1195 1043 1091 1151

174 174 174 174 207 207 207 207 265 265 265 265

C40D18BS C40D20BS C40D24BS C40T14BS C40T16BS C40T18BS C40T20BS C40Q12BS C40Q14BS C40Q16BS C40Q18BS

2103512 2103514 2103516 2103520 2103522 2103524 2103526 2103530 2103532 2103534 2103536

36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3 36.3

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

1276 1308 1410 1207 1264 1276 1308 1159 1207 1264 1276

199 199 199 207 207 264 264 265 265 265 339

C45D18BS C45D20BS C45D24BS C45T14BS C45T16BS C45T18BS C45T20BS C45Q12BS C45Q14BS C45Q16BS C45Q18BS

2103582 2103584 2103586 2103590 2103592 2103594 2103596 2103600 2103602 2103604 2103606

40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8 40.8

2 2 2 3 3 3 3 4 4 4 4

457 508 610 356 406 457 508 305 356 406 457

1276 1308 1410 1207 1264 1276 1308 1159 1207 1264 1276

199 199 199 207 207 264 264 265 265 265 339

C50D20BS C50D24BS C50T18BS

2103640 2103642 2103650

45.4 45.4 45.4

2 2 3

508 610 457

1443 1545 1411

199 199 264

F G 206 22.4 257 22.4 308 22.4 359 22.4 22.7 Tonnes 460 -308 22.4 359 22.4 409 22.4 257 22.4 308 22.4 359 22.4 409 22.4 206 22.4 257 22.4 308 22.4 359 22.4 27.2 Tonnes 308 25.4 359 25.4 409 25.4 460 25.4 257 25.4 308 25.4 359 25.4 409 25.4 257 25.4 308 25.4 359 25.4 409 25.4 31.8 Tonnes 308 25.4 359 25.4 409 25.4 460 25.4 257 25.4 308 25.4 359 25.4 409 25.4 257 25.4 308 25.4 359 25.4 409 25.4 36.3 Tonnes 460 28.7 511 28.7 613 28.7 359 28.7 409 28.7 460 28.7 511 28.7 308 28.7 359 28.7 409 28.7 460 28.7 40.8 Tonnes 460 28.7 511 28.7 613 28.7 359 28.7 409 28.7 460 28.7 511 28.7 308 28.7 359 28.7 409 28.7 460 28.7 45.4 Tonnes 511 31.8 613 31.8 460 31.8

H 24.6 24.6 24.6 24.6

I 29.0 29.0 29.0 29.0

S 167 167 167 167

T 119 119 119 119

U 49.3 49.3 49.3 49.3

V 38.1 38.1 38.1 38.1

W 41.1 41.1 41.1 41.1

X 58.5 58.5 58.5 58.5

Weight Each (kg.) 98 122 140 162

-24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6 24.6

-29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0 29.0

167 167 167 167 167 167 167 167 167 167 167 167

119 119 119 119 119 119 119 119 119 119 119 119

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1

-58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5 58.5

107 92 107 125 100 113 134 159 98 122 140 162

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

167 167 167 167 167 167 167 167 167 167 167 167

103 103 103 103 103 103 103 103 103 103 103 103

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1

71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0

111 127 147 181 124 136 156 184 148 165 188 177

26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9 26.9

34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0 34.0

167 167 167 167 167 167 167 167 167 167 167 167

103 103 103 103 103 103 103 103 103 103 103 103

49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3 49.3

38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1

71.0 71.0 71.0 71.0 71.0 71.0 58.5 58.5 58.5 58.5 58.5 58.5

111 127 147 181 124 136 156 184 148 165 188 222

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

203 203 203 203 203 203 203 203 203 203 203

130 130 130 130 130 130 130 130 130 130 130

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

255 295 376 177 204 308 358 191 211 243 363

31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1 37.1

203 203 203 203 203 203 203 203 203 203 203

130 130 130 130 130 130 130 130 130 130 130

63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5 63.5

44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5 44.5

57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0

84.0 84.0 84.0 58.5 58.5 73.5 73.5 58.5 58.5 58.5 73.5

255 295 376 177 204 308 358 191 211 243 363

35.1 35.1 35.1

41.1 41.1 41.1

226 226 226

143 143 133

73.0 73.0 73.0

51.0 51.0 51.0

61.0 61.0 61.0

84.0 84.0 73.5

336 419 341

Fr25S

Fr30S

Fr40S

Fr45S

Fr50S

299

McKissick Blocks

Fr35S

McKissick®Construction Blocks Blocks with Hanger and Shackle - Dimensions (mm)

680S

Model No. C50T20BS C50T24BS C50Q16BS C50Q18BS

680-S Working Inquiry Load No. of Stock Limit Sheaves No. (t) 2103652 45.4 3 2103654 45.4 3 2103660 45.4 4 2103662 45.4 4

C55D20BS C55D24BS C55T18BS C55T20BS C55T24BS C55Q16BS C55Q18BS

2103700 2103702 2103710 2103712 2103714 2103720 2103722

49.9 49.9 49.9 49.9 49.9 49.9 49.9

C60T18BS C60T20BS C60T24BS C60Q18BS C60Q20BS C60Q24BS

2103760 2103762 2103764 2103770 2103772 2103774

C65T18BS C65T20BS C65T24BS C65Q18BS C65Q20BS C65Q24BS

Sheave Diam. (mm) 508 610 406 457

A 1443 1545 1357 1411

E 264 264 339 339

2 2 3 3 3 4 4

508 610 457 508 610 406 457

1443 1545 1411 1443 1545 1357 1411

199 199 264 264 264 339 339

54.4 54.4 54.4 54.4 54.4 54.4

3 3 3 4 4 4

457 508 610 457 508 610

1411 1441 1543 1411 1441 1543

264 264 264 339 339 339

2103810 2103812 2103814 2103820 2103822 2103824

59.0 59.0 59.0 59.0 59.0 59.0

3 3 3 4 4 4

457 508 610 457 508 610

1411 1441 1543 1411 1441 1543

264 264 264 339 339 339

C70T20BS C70Q20BS C70Q24BS C70QN20BS C70QN24BS

2103830 2103840 2103842 2103850 2103852

63 63 63 63 63

3 4 4 5 5

508 508 610 508 610

1670 1670 1772 1670 1772

283 338 338 463 463

C80T20BS C80Q20BS C80Q24BS C80QN20BS C80QN24BS

2103860 2103870 2103872 2103880 2103882

72 72 72 72 72

3 4 4 5 5

508 508 610 508 610

1670 1670 1772 1670 1772

283 338 338 463 463

C90Q20BS C90Q24BS C90QN20BS C90QN24BS

2103920 2103922 2103930 2103932

81 81 81 81

4 4 5 5

508 610 508 610

1670 1772 1670 1772

338 338 463 463

C100QN20BS C100QN24BS C100SX20BS C100SX24BS

2103970 2103972 2103980 2103982

90 90 90 90

5 5 6 6

508 610 508 610

1670 1772 1670 1772

463 463 518 518

H 35.1 35.1 35.1 35.1

I 41.1 41.1 41.1 41.1

S 226 226 226 226

T 133 133 133 133

U 73.0 73.0 73.0 73.0

V 51.0 51.0 51.0 51.0

W 61.0 61.0 61.0 61.0

X 73.5 73.5 73.5 73.5

Weight Each (kg.) 392 489 354 422

35.1 35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1 41.1

226 226 226 226 226 226 226

143 143 133 133 133 133 133

73.0 73.0 73.0 73.0 73.0 73.0 73.0

51.0 51.0 51.0 51.0 51.0 51.0 51.0

61.0 61.0 61.0 61.0 61.0 61.0 61.0

84.0 84.0 73.5 73.5 73.5 73.5 73.5

336 419 341 392 489 354 422

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

226 226 226 226 226 226

133 133 133 133 133 133

73.0 73.0 73.0 73.0 73.0 73.0

51.0 51.0 51.0 51.0 51.0 51.0

61.0 61.0 61.0 61.0 61.0 61.0

73.5 73.5 73.5 73.5 73.5 73.5

341 392 489 422 490 585

35.1 35.1 35.1 35.1 35.1 35.1

41.1 41.1 41.1 41.1 41.1 41.1

226 226 226 226 226 226

133 133 133 133 133 133

73.0 73.0 73.0 73.0 73.0 73.0

51.0 51.0 51.0 51.0 51.0 51.0

61.0 61.0 61.0 61.0 61.0 61.0

73.5 73.5 73.5 73.5 73.5 73.5

341 392 489 422 490 585

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

302 302 302 302 302

184 184 184 184 184

91.9 91.9 91.9 91.9 91.9

68.8 68.8 68.8 68.8 68.8

79.2 79.2 79.2 79.2 79.2

83.8 73.7 73.7 83.8 83.8

531 560 708 721 907

38.1 38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2 46.2

302 302 302 302 302

184 184 184 184 184

91.9 91.9 91.9 91.9 91.9

68.8 68.8 68.8 68.8 68.8

79.2 79.2 79.2 79.2 79.2

83.8 73.7 73.7 83.8 83.8

531 590 708 721 907

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

302 302 302 302

184 184 184 184

91.9 91.9 91.9 91.9

68.8 68.8 68.8 68.8

79.2 79.2 79.2 79.2

73.7 73.7 83.8 83.8

617 780 721 934

38.1 38.1 38.1 38.1

46.2 46.2 46.2 46.2

302 302 302 302

184 184 184 184

91.9 91.9 91.9 91.9

68.8 68.8 68.8 68.8

79.2 79.2 79.2 79.2

83.8 83.8 73.7 73.7

721 934 755 977

Fr5 S

Fr60S

Fr65S

Fr70S

Fr80S

Fr90S

Fr10 S

300

Time tested and work proven......... McKissick® blocks, overhaul balls and sheaves have been leading the way for more than 65 years, and have been utilized in the most demanding applications in every corner of the world. Only McKissick® offers world class products with unequaled service and customer support behind each one. Whether the items you require are standard off-the-shelf, or specially engineered, demand products made in the U.S.A. Demand McKissick®.........the original.

380 Series Crane Blocks

680 Series Construction Blocks

Snatch Blocks

Roll Forged™ Sheaves ®

Your Total Block Company The Crosby Group Inc. P.O. Box 3128 • Tulsa, OK 74101 (918) 834-4611 • Fax: (918) 832-0940 www.thecrosbygroup.com • crosbygroup@thecrosbygroup.com

UB-500 Overhaul Balls

380 Series Easy Reeve® Crane Blocks

MckBlk_1012.fm Page 57 Thursday, February 9, 2006 11:46 AM

McKissick® Overhead Bridge Crane Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

On Pages 332-339

McKissick® Easy-Lift® Overhead Bridge Crane Blocks • Wide range of product available (see tables below). • Removable housing allows block to be reeved without complete disassembly. • Bearing life and Design Factors meet: •ASME HST-4, Class H •CMAA 70 Class D •FEM9.511 Class 2m •ISO 4301.1 Class M5 • Adjustable sheave spacing in 1/2" increments. • Sheave pitch diameter minimum of 16 times rope diameter on standard sizes. • All single point shank hooks are genuine Crosby®, forged alloy steel, Quenched and Tempered, contain the patented QUIC-CHECK® markings and come with a world class latch that integrates with hook tip. s k c o l B

e n a r C

e g d i r B

d a e h r e v O

k c i s s i K c M

• Sheave bearings are maintenance free and sealed for life (10,000 hrs.). • Ability to attach optional anti two-block device. • Available with shackle as lower connection point. • Ultimate load is 5 times the Working Load Limit.

Single and Double Sheave Blocks

Key to McKissick® Easy-Lift® Overhead Bridge Crane Blocks Double Sheave Blocks Only

McKissick® 750 Series Bridge Crane Blocks

Working Load Limit (Tons)

Number of Sheaves S=1 D=2

Sheave Diameter (in.)

Center Pin Designation

Sheave Spacing in 1/8” Increments

BC-751-Single Sheave WLL (t) Sheave O.D. Pitch Diameter Wire Line* 1/4” 6.5mm 5/16” 8mm 3/8” 9 - 10mm 7/16” 11mm 1/2” 12 - 13mm 9/16” 14mm 5/8” 16mm 3/4” 19mm 7/8” 22mm 1” 25 - 26mm

Model 751 - Single Sheave 2 3 5 7.5 10 6.5” 165mm 8” 203mm 10” 254mm 12” 305mm 14” 356mm 5.9” 151mm 7.38” 187mm 9.25” 235mm 11” 279mm 12.5” 318mm

BC-751

* Additional wireline sizes available.

BC-752 - Double Sheave WLL (t) Sheave O.D. (mm) Sheave Spacing Centerline (mm) Pitch Diameter (mm)

1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4”

Model 752 - Double Sheave 3 5 7.5 10 15 6.5” 165mm 8” 203mm 10” 254mm 12” 305mm 12” 305mm 3.25” - 5” 4.5” - 6.5” 5.25” - 7.75” 6.5” - 10” 7.5” - 11” 82.6 - 127mm 114 - 165mm 133 - 203mm 165 - 254mm 191 - 279mm 5.95” 7.38” 9.25” 11” 11” 150 - 152mm 183 - 191mm 228 - 236mm 273 - 282mm 273 - 282mm

Wire Line* 6.5mm 8mm 9 - 10mm 1mm 12 - 13mm 14mm 16mm 19mm

BC-752

* Additional wireline sizes available.

302

McKissick® Overhead Bridge Crane Blocks e g d i r B

d a e h r e v O

k c i s s i K c M

751 Series Bridge Crane Blocks Model No.

BC-751 Stock No.

Working Load Limit (t)*

BC02S06 BC02S06 BC02S06

2022539 2022540 2022541

1.8 1.8 1.8

165 165 165

BC03S08 BC03S08 BC03S08 BC03S08

2022522 2022523 2022524 2022525

2.7 2.7 2.7 2.7

203 203 203 203

BC05S10 BC05S10 BC05S10 BC05S10 BC05S10

2022526 2022527 2022528 2022529 2022530

4.5 4.5 4.5 4.5 4.5

254 254 254 254 254

BC07S12 BC07S12 BC07S12 BC07S12

2022531 2022532 2022533 2022534

6.8 6.8 6.8 6.8

305 305 305 305

BC10S14 BC10S14 BC10S14 BC10S14

2022535 2022536 2022537 2022538

9 9 9 9

356 356 356 356

BC751

Sheave Diameter (mm)

Dimensions (mm) B 1.8 Tonnes 354 354 354 2.7 Tonnes 429 429 429 429 4.5 Tonnes 533 533 533 533 533 6.8 Tonnes 646 646 646 646 9 Tonnes 740 740 740 740

Standard Wire Line Size (mm)

325 325 325

53.8 53.8 53.8

29.5 29.5 29.5

184 184 184

6 8 10

8.2 8.2 8.2

391 391 391 391

69.8 69.8 69.8 69.8

35.8 35.8 35.8 35.8

227 227 227 227

8 10 11 13

16 16 16 16

487 487 487 487 487

88.9 88.9 88.9 88.9 88.9

42.9 42.9 42.9 42.9 42.9

282 282 282 282 282

10 11 13 14 16

27 27 27 27 27

589 589 589 589

108 108 108 108

56.4 56.4 56.4 56.4

418 418 418 418

13 14 16 19

52 52 52 52

673 673 673 673

127 127 127 127

61.2 61.2 61.2 61.2

394 394 394 394

16 19 22 25

70 70 70 70

Weight Each (kg.)

Fr5S

Fr7.5S

Fr10S

* Ultimate Load is 5 times the Working Load Limit

752 Series Bridge Crane Blocks Model No.

BC-752 Stock No.

Working Load Limit (t)*

Sheave Diameter (mm)

BC03D06M26 BC03D06M28 BC03D06M30 BC03D06M32 BC03D06N34 BC03D06N36 BC03D06N38 BC03D06N40 BC03D06M26 BC03D06M28 BC03D06M30 BC03D06M32 BC03D06N34 BC03D06N36 BC03D06N38 BC03D06N40 BC03D06M26 BC03D06M28 BC03D06M30 BC03D06M32 BC03D06N34 BC03D06N36 BC03D06N38 BC03D06N40

2022731 2022732 2022733 2022734 2022735 2022736 2022737 2022738 2022739 2022740 2022741 2022742 2022743 2022744 2022745 2022746 2022747 2022748 2022749 2022750 2022751 2022752 2022753 2022754

2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7

165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165

82.6 88.9 95.3 102 108 114 121 127 82.6 88.9 95.3 102 108 114 121 127 82.6 88.9 95.3 102 108 114 121 127

BC752

B 2.7 Tonnes 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341 341

Dimensions (mm) C D 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304 304

146 146 146 146 171 171 171 171 146 146 146 146 171 171 171 171 146 146 146 146 171 171 171 171

Standard Wire Line Size (mm)

35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8 35.8

189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189

6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10

Weight Each (kg.) 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9 15.9

303

McKissick Blocks

e n a r C

McKissick® Overhead Bridge Crane Blocks BC752

Model No.

BC-752 Stock No.

Working Load Limit (t)*

Sheave Diameter (mm)

B 4.5 Tonnes 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 417 6.8 Tonnes 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514 514

Dimensions (mm) C D

Standard Wire Line Size (mm)

Weight Each (kg.)

Fr5S

BC05D08B36 BC05D08B36 BC05D08B36 BC05D08B36 BC05D08B36 BC05D08B40 BC05D08B40 BC05D08B40 BC05D08B40 BC05D08B40 BC05D08B44 BC05D08B44 BC05D08B44 BC05D08B44 BC05D08B44 BC05D08C44 BC05D08C44 BC05D08C44 BC05D08C44 BC05D08C44 BC05D08C48 BC05D08C48 BC05D08C48 BC05D08C48 BC05D08C48 BC05D08C52 BC05D08C52 BC05D08C52 BC05D08C52 BC05D08C52

2022550 2022551 2022552 2022553 2022554 2022555 2022556 2022557 2022558 2022559 2022560 2022561 2022562 2022563 2022564 2022565 2022566 2022567 2022568 2022569 2022570 2022571 2022572 2022573 2022574 2022575 2022576 2022577 2022578 2022579

4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5

203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203 203

114 114 114 114 114 127 127 127 127 127 140 140 140 140 140 140 140 140 140 140 152 152 152 152 152 165 165 165 165 165

BC07D10D42 BC07D10D42 BC07D10D42 BC07D10D42 BC07D10D42 BC07D10D46 BC07D10D46 BC07D10D46 BC07D10D46 BC07D10D46 BC07D10D50 BC07D10D50 BC07D10D50 BC07D10D50 BC07D10D50 BC07D10E48 BC07D10E48 BC07D10E48 BC07D10E48 BC07D10E48 BC07D10E52 BC07D10E52 BC07D10E52 BC07D10E52 BC07D10E52 BC07D10E56 BC07D10E56 BC07D10E56 BC07D10E56 BC07D10E56 BC07D10F56 BC07D10F56 BC07D10F56 BC07D10F56 BC07D10F56 BC07D10F60 BC07D10F60 BC07D10F60 BC07D10F60 BC07D10F60 BC07D10F64

2022580 2022581 2022582 2022583 2022584 2022585 2022586 2022587 2022588 2022589 2022590 2022591 2022592 2022593 2022594 2022595 2022596 2022597 2022598 2022599 2022600 2022601 2022602 2022603 2022604 2022605 2022606 2022607 2022608 2022609 2022610 2022611 2022612 2022613 2022614 2022615 2022616 2022617 2022618 2022619 2022620

6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8

254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254 254

133 133 133 133 133 146 146 146 146 146 159 159 159 159 159 152 152 152 152 152 165 165 165 165 165 178 178 178 178 178 178 178 178 178 178 191 191 191 191 191 203

371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371 371

195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195 195

42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9 42.9

227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227

6 8 10 11 13 6 8 10 11 13 6 8 10 11 13 6 8 10 11 13 6 8 10 11 13 6 8 10 11 13

34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34

457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457 457

221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221

56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4 56.4

282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282 282

10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10 11 13 14 16 10

57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57

Fr7.5S

304

McKissick® Overhead Bridge Crane Blocks Model No. BC07D10F64 BC07D10F64 BC07D10F64 BC07D10F64

BC-752 Stock No. 2022621 2022622 2022623 2022624

Working Load Limit (t)* 6.8 6.8 6.8 6.8

Sheave Diameter (mm) 254 254 254 254

A 203 203 203 203

BC10D12G52 BC10D12G52 BC10D12G52 BC10D12G52 BC10D12G56 BC10D12G56 BC10D12G56 BC10D12G56 BC10D12G60 BC10D12G60 BC10D12G60 BC10D12G60 BC10D12G64 BC10D12G64 BC10D12G64 BC10D12G64 BC10D12I68 BC10D12I68 BC10D12I68 BC10D12I68 BC10D12I72 BC10D12I72 BC10D12I72 BC10D12I72 BC10D12I76 BC10D12I76 BC10D12I76 BC10D12I76 BC10D12I80 BC10D12I80 BC10D12I80 BC10D12I80

2022625 2022626 2022627 2022628 2022629 2022630 2022631 2022632 2022633 2022634 2022635 2022636 2022637 2022638 2022639 2022640 2022657 2022658 2022659 2022660 2022661 2022662 2022663 2022664 2022665 2022666 2022667 2022668 2022669 2022670 2022671 2022672

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305

165 165 165 165 178 178 178 178 191 191 191 191 203 203 203 203 216 216 216 216 229 229 229 229 241 241 241 241 254 254 254 254

BC15D12J60 BC15D12J60 BC15D12J60 BC15D12J60 BC15D12J64 BC15D12J64 BC15D12J64 BC15D12J64 BC15D12J68 BC15D12J68 BC15D12J68 BC15D12J68 BC15D12J72 BC15D12J72 BC15D12J72 BC15D12J72 BC15D12L76 BC15D12L76 BC15D12L76 BC15D12L76 BC15D12L80 BC15D12L80 BC15D12L80 BC15D12L80 BC15D12L84 BC15D12L84 BC15D12L84 BC15D12L84 BC15D12L88 BC15D12L88 BC15D12L88 BC15D12L88

2022673 2022674 2022675 2022676 2022677 2022678 2022679 2022680 2022681 2022682 2022683 2022684 2022685 2022686 2022687 2022688 2022705 2022706 2022707 2022708 2022709 2022710 2022711 2022712 2022713 2022714 2022715 2022716 2022717 2022718 2022719 2022720

13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6

305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305

191 191 191 191 203 203 203 203 216 216 216 216 229 229 229 229 241 241 241 241 254 254 254 254 267 267 267 267 279 279 279 279

BC752

B 514 514 514 514 9 Tonnes 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 590 13.6 Tonnes 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645 645

Dimensions (mm) C D 457 221 457 221 457 221 457 221

E 56.4 56.4 56.4 56.4

524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524 524

278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278 278

568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568 568

303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303 303

F 282 282 282 282

Standard Wire Line Size (mm) 11 13 14 16

Weight Each (kg.) 514 514 514 514

61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2 61.2

342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342

13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19

109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109

81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0 81.0

342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342 342

13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19 13 14 16 19

122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122

Fr10S

McKissick Blocks

Fr15S

* Ultimate Load is 5 times the Working Load Limit

305

McKissick®Overhaul Balls UB500 SERIES TOP SWIVELING OVERHAUL BALLS

S320 or S320N Eye Hook

S316A SHUR-LOC® Eye Hook

• Sizes 4 tons through 10 tons available with Crosby’s S316A “Positive Locking” SHUR-LOC® hook which may be used for lifting personnel. Meets OSHA Rule 1926.550 (g). • Design Factor 4:1. • The top swivel design on the UB500 assures the ball remains stationary if the wire line spins. • The swivel incorporates a sealed roller thrust bearing together with a grease fitting for easy lubrication. • Each ball can be equipped with the new McKissick® US-422T Wedge Socket which can be easily adjusted to fit

McKissick® UB500 Model No. MB4T35 MB4T85 MB4T150 MB4T200 MB7T85 MB7T150 MB7T200 MB7T285 MB10T150 MB10T200 MB10T285 MB10T350 MB10T650 MB12T150 MB12T200 MB12T285 MB12T350 MB12T650 MB15T200 MB15T350 MB15T650 MB15T1150 MB20T200 MB20T350 MB20T650 MB20T1150 MB25T350 MB25T650 MB25T1150 MB30T650 MB30T1150

Overhaul Ball Assembly UB500 UB500 Working “E” “S” Eye Hook SHUR-LOC® Load Limit (t) Stock No. Stock No. 1036000* 1036005 3.6 1036009* 1036018 3.6 1036027* 1036032 3.6 1036036* 1036041 3.6 1036045* 1036050 6.3 1036054* 1036063 6.3 1036072* 1036077 6.3 1036081* 1036086 6.3 1036090* 1036095 9.0 1036099* 1036108 9.0 1036117* 1036122 9.0 1036126* 1036131 9.0 1036135* 1036140 9.0 1036144* — 10.8 1036153* — 10.8 1036171* — 10.8 1036180* — 10.8 1036189* — 10.8 1036198* — 13.5 1036207* — 13.5 1036216* — 13.5 1036225* — 13.5 1036234* — 18.0 1036243* — 18.0 1036252* — 18.0 1036261* — 18.0 1036270 — 22.5 1036279 — 22.5 1036288 — 22.5 1036297 — 27.0 1036306 — 27.0

Weight Each (kg) 26.3 46.3 73.5 91.2 49.4 77.1 95.3 146 98 118 166 183 326 98 117 166 183 326 135 207 342 595 135 207 342 595 242 392 645 392 645

UWO 422T TERMINATORTM Wedge Only

Both styles available with optional McKissick® Wedge Socket Assembly or S-421 TERMINATORTM Wedge Socket

various sizes of wire rope by changing the wedge (Ensure that correct wedge is used for selected wire rope size). • All hooks used on UB500 Overhaul Balls (S320, S320N & S316A) are forged from alloy steel. The S320 and S320N hooks come complete with latches. • The S320 hook (PL latch) and the S320N hook (S4320 latch), with the proper latch attached, may be used for personnel lifting when secured with proper device (Bolt, nut and pin for the PL latch; Cotter pin for the S4320 latch). Meets OSHA Rule 1926.550 (g).

Wire Rope Size (mm)

Optional US-422T Wedge Sockets Wedge Weight Wedge Socket Each Only Assy. (kg) Stock No. Model No. Stock No.

Weight Each (lbs.)

10 11 13 13 14 16 16 19

US4T US4T US4T US5T US5T US5T US6T US6T

1044300 1044309 1044318 1044327 1044336 1044345 1044354 1044363

2.1 2.1 2.1 3.9 3.9 3.9 4.3 4.3

1047310 1047301 1047329 1047338 1047347 1047356 1047365 1047374

.27 .27 .27 .45 .45 .45 .64 .64

16 19 22 25 28 32

US6T US6T US8T US8T US10T US10T

1044354 1044363 1044404 1044417 1044426 1044435

4.3 4.3 9.4 9.4 21.1 21.1

1047365 1047374 1047425 1047431 1047440 1047459

.64 .64 1.4 1.4 4.1 4.1

16 19 22 25 28 32

US8AT US8AT US8T US8T US10T US10T

1044372 1044381 1044404 1044417 1044426 1044435

7.9 7.9 9.4 9.4 21.1 21.1

1047383 1047392 1047425 1047431 1047440 1047459

1.4 1.4 1.4 1.4 4.1 4.1

*Hook is New S-320 N Style. Replacement latch kit is S-4320. PL latch and S-4055 latch will not fit. Standard Crosby S-5 Thrust style swivels can not be used with UB500 Overhaul Balls. For replacement swivels, contact Crosby customer service.

306

McKissick® Overhaul Balls UB-500 Top Swivel Overhaul Balls l u a h r e v O

k c i s s i K c M

UB-500E Top Swivel Overhaul Balls with 320 Eye Hooks Dimensions (mm)

UB50 TSE

Model No.* MB4T35* MB4T85* MB4T150* MB4T200* MB7T85* MB7T150* MB7T200* MB7T285* MB10T150* MB10T200* MB10T285* MB10T350* MB10T650* MB12T150* MB12T200* MB12T285* MB12T350* MB12T650* MB15T200* MB15T350* MB15T650* MB15T1150* MB20T200* MB20T350* MB20T650* MB20T1150* MB25T350 MB25T650 MB25T1150 MB30T650 MB30T1150

UB-500 "E" Stock No. 1036000 1036009 1036027 1036036 1036045 1036054 1036072 1036081 1036090 1036099 1036117 1036126 1036135 1036144 1036153 1036171 1036180 1036189 1036198 1036207 1036216 1036225 1036234 1036243 1036252 1036261 1036270 1036279 1036288 1036297 1036306

A 510 533 558 568 589 624 632 657 799 808 832 846 884 799 808 832 846 909 955 986 1022 1072 955 986 1022 1072 1198 1248 1297 1248 1297

B 439 461 487 496 517 543 551 576 691 700 724 738 776 691 700 724 738 776 828 859 895 945 828 859 895 945 1021 1086 1135 1086 1135

C 191 235 286 318 235 286 318 353 286 318 353 381 456 286 318 353 381 456 318 381 456 549 318 381 456 549 381 456 549 456 549

D 34.5 34.5 34.5 34.5 40.9 40.9 40.9 40.9 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 76.5 76.5 76.5 76.5 76.5 76.5 76.5 76.5 76.0 76.0 76.0 76.0 76.0

E 36.6 36.6 36.6 36.6 46.0 46.0 46.0 46.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 92.0 92.0 92.0 92.0 92.0

F 28.4 28.4 28.4 28.4 35.1 35.1 35.1 35.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 76.0 76.0 76.0 76.0 76.0

G 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 60.5 60.5 60.5 60.5 60.5 60.5 60.5 60.5 84.0 84.0 84.0 84.0 84.0

H 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 70.0 70.0 70.0 70.0 70.0

I 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 44.5 44.5 44.5 44.5 44.5

J 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2

AA 63.5 63.5 63.5 63.5 76.0 76.0 76.0 76.0 102 102 102 102 102 102 102 102 102 102 127 127 127 127 127 127 127 127 165 165 165 165 165

* 4 ton thru 20 ton models use New 320-N Eye Hooks s l l a B

l u a h r e v O

k c i s s i K c M

UB-500S Top Swivel Overhaul Balls with SHUR-LOC® Hooks Dimensions (mm)

UB50 S

Model No. MB4T35 MB4T85 MB4T150 MB4T200 MB7T85 MB7T150 MB7T200 MB7T285 MB10T150 MB10T200 MB10T285 MB10T350 MB10T650

UB500 "S" Stock No. 1036005 1036018 1036032 1036041 1036050 1036063 1036077 1036086 1036095 1036108 1036122 1036131 1036140

McKissick Blocks

s l l a B

A 525 547 573 582 607 642 650 675 793 803 827 841 879

B 462 484 509 519 541 566 575 600 691 700 724 738 776

C 191 235 286 318 235 286 318 353 286 318 353 381 456

D 46.5 46.5 46.5 46.5 53.5 53.5 53.5 53.5 63.0 63.0 63.0 63.0 63.0

E 29.2 29.2 29.2 29.2 42.2 42.2 42.2 42.2 52.5 52.5 52.5 52.5 52.5

F 23.9 23.9 23.9 23.9 29.5 29.5 29.5 29.5 38.1 38.1 38.1 38.1 38.1

G 47.8 47.8 47.8 47.8 47.8 47.8 47.8 47.8 70.0 70.0 70.0 70.0 70.0

H 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 51.0 51.0 51.0 51.0 51.0

I 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 31.8 31.8 31.8 31.8 31.8

J 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 45.2 45.2 45.2 45.2 45.2

307

McKissick®Overhaul Balls UB500 SERIES NON SWIVELING OVERHAUL BALLS Clave para los modelos de las Bolas Rápidas UB500

Bola rápida McKissick®

Carga límite de trabajo (Tons)

Estilo giratorio Working

Peso de la bola

Estilo de ojo E=320 or 320N Gancho de ojo S=SHUR-LOC® Gancho de ojo

T=Superior NS=Sin

S320 or S320N Gancho de ojo

• Cada bola se puede equipar con una nueva terminal de cuña McKissick® US-422 de fácil ajuste a diferentes tamaños de cable con tan solo cambiar la cuña (Asegura el uso de la cuña adecuada para el tamaño de cable seleccionado). • Todos los ganchos utilizados con las bolas rápidas UB500 (S320, S320N y S316A) están forjados en acero de aleación. Los ganchos S320 y S320N vienen completes con sus seguros. • Factor de diseño de 4:1 • Tamaños entre 4 y 10 tons disponibles con el gancho Crosby S316A de cierre positivo SHUR-LOC® el cual se puede usar izar personal. Cumplen con la Norma OSHA 1926.550 (g).

McKissick® UB500 Modelo No.

Ambos estilos disponibles con conjunto opcaional de cuña y casquillo McKissick®

UWO 422 TERMINATOR

cas quillo solo

• Los ganchos S320 (seguro PL) y S320N (seguro S4320), más la chaveta adecuada, se pueden utilizar para izar personal mientras estén asegurados con el dispositivo adecuado (perno, tuerca y pasador para el seguro PL; pasadores para el seguro S4320). Cumplen con la Norma OSHA 1926.550 (g).

Conjunto de bolas rápidas UB500 UB500 “E” “S” Gancho de SHUR-LOC® ojo No. de No. de parte parte

S316A SHUR-LOC® Gancho de ojo

Opcional US-422T /US 422 cuña y casquillo

Carga límite de trabajo (tons)

Peso de c/u (lbs.) 54

MB4NS35

1036402*

1036407

MB4NS85

1036411*

1036416

MB4NS150

1036420*

1036425

158

MB4NS200

1036429*

1036434

200

MS7NS85

1036438*

1036443

104

MB7NS150

1036447*

1036452

165

MB7NS200

1036456*

1036461

205

MB7NS285

1036465*

1036470

316

MB10NS150

1036474*

1036479

198

MB10NS200

1036483*

1036488

242

MB10NS285

1036492*

1036497

247

MB10NS350

1036501*

1036506

385

MB10NS650

1036510*

1036511

700

MB12NS150

1036519*

—

198

MB12NS200

1036528*

—

240

MB12NS285

1036537*

—

347

MB12NS350

1036546*

—

385

MB12NS650

1036555*

—

700

MB15NS200

1036564*

—

267

MB15NS350

1036573*

—

425

MB15NS650

1036582*

—

722

MB15NS1150

1036591*

—

1280

Tamaño del cable (plg.)

Conjunto de terminal con cuña No. de Modelo No. parte

Peso de c/u (lbs.)

Casquillo solo No. de parte

Peso de c/u (lbs.)

3/8 7/16 1/2 1/2 9/16 5/8 5/8 3/4

US4T US4T US4T US5T US5T US5T US6T US6T

1044300 1044309 1044318 1044327 1044336 1044345 1044354 1044363

4.6 4.6 4.6 8.5 8.5 8.5 9.4 9.4

1047310 1047301 1047329 1047338 1047347 1047356 1047365 1047374

0.6 0.6 0.6 1.0 1.0 1.0 1.4 1.4

5/8 3/4 7/8 1 1-1/8 1-1/4

US6T US6T US8T US8T US10T US10T

1044354 1044363 1044404 1044417 1044426 1044435

9.4 9.4 20.8 20.8 46.5 46.5

1047365 1047374 1047425 1047431 1047440 1047459

1.4 1.4 7.6 8.6 12.5 15.0

5/8 3/4 7/8 1 1-1/8 1-1/4

US8AT US8AT US8T US8T US10T US10T

1044372 1044381 1044404 1044417 1044426 1044435

17.5 17.5 20.8 20.8 46.5 46.5

1047383 1047392 1047425 1047431 1047440 1047459

4.3 4.8 7.6 8.6 12.5 15.0

* El gancho corresponde al nuevo estillo S-320N. El juego del seguro de repuesto es S-4320. Los seguros PL y S-4055 no encajan. † Estilo TERMINATORTM US-422T.

308

McKissick® Overhaul Balls UB-500 Non Swivel Overhaul Balls l u a h r e v O

k c i s s i K c M

UB-500 Non Swivel Overhaul Balls with 320N Eye Hooks Dimensions (mm)

UB50 NSE

Model No. MB4NS35 MB4NS85 MB4NS150 MB4NS200 MB7NS85 MB7NS150 MB7NS200 MB7NS285 MB10NS150 MB10NS200 MB10NS285 MB10NS350 MB10NS650 MB12NS150 MB12NS200 MB12NS285 MB12NS350 MB12NS650 MB15NS200 MB15NS350 MB15NS650 MB15NS1150 s l l a B

l u a h r e v O

UB-500NS "E" Stock No. 1036402 1036411 1036420 1036429 1036438 1036447 1036456 1036465 1036474 1036483 1036492 1036501 1036510 1036519 1036528 1036537 1036546 1036555 1036564 1036573 1036582 1036591

A 510 533 558 568 589 624 632 657 799 808 832 846 884 799 808 832 846 909 955 986 1022 1072

B 439 461 487 496 517 543 551 576 691 700 724 738 776 691 700 724 738 776 828 859 895 945

C 191 235 286 318 235 286 318 353 286 318 353 381 456 286 318 353 381 456 318 381 456 549

D 34.5 34.5 34.5 34.5 40.9 40.9 40.9 40.9 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 53.0 76.5 76.5 76.5 76.5

E 36.6 36.6 36.6 36.6 46.0 46.0 46.0 46.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 57.0 76.0 76.0 76.0 76.0

F 28.4 28.4 28.4 28.4 35.1 35.1 35.1 35.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 41.1 60.5 60.5 60.5 60.5

H 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0 51.0

I 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8

J 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2 45.2

AA 63.5 63.5 63.5 63.5 76.0 76.0 76.0 76.0 102 102 102 102 102 102 102 102 102 102 127 127 127 127

k c i s s i K c M

UB-500 Non Swivel Overhaul Balls with SHUR-LOC® Hooks Dimensions (mm)

UB50 NS

Model No. MB4NS35 MB4NS85 MB4NS150 MB4NS200 MB7NS85 MB7NS150 MB7NS200 MB7NS285 MB10NS150 MB10NS200 MB10NS285 MB10NS350 MB10NS650

UB-500NS "S" Stock No. 1036407 1036416 1036425 1036434 1036443 1036452 1036461 1036470 1036479 1036488 1036497 1036506 1036511

A 525 547 573 582 607 642 650 675 793 803 827 841 879

B 462 484 509 519 541 566 575 600 691 700 724 738 776

C 191 235 286 318 235 286 318 353 286 318 353 381 456

D 46.5 46.5 46.5 46.5 53.5 53.5 53.5 53.5 63.0 63.0 63.0 63.0 63.0

E 29.2 29.2 29.2 29.2 42.2 42.2 42.2 42.2 52.0 52.0 52.0 52.0 52.0

F 23.9 23.9 23.9 23.9 29.5 29.5 29.5 29.5 38.1 38.1 38.1 38.1 38.1

H 35.1 35.1 35.1 35.1 35.1 35.1 35.1 35.1 51.0 51.0 51.0 51.0 51.0

I 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 31.8 31.8 31.8 31.8 31.8

J 33.3 33.3 33.3 33.3 33.3 33.3 33.3 33.3 45.2 45.2 45.2 45.2 45.2

309

McKissick Blocks

s l l a B

McKissick®Overhaul Balls s l l a B

l u a h r e v O

k c i s s i K c M

SPLIT OVERHAUL BALLS

Split Overhaul Ball • Attaches easily to Wire Rope. Wire Rope Size (mm) 6-8 10 13 - 16 16 - 19 - 22

SHB

Catalog No. SHB - 15 SHB - 20 SHB - 50 SHB - 100

• Utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK® markings. • Entire overhaul ball is zinc plated to resist corrosion. • Designed with angular contact bearings which maximize efficiency, reliability and service life of swivel and extend the life of the wire rope. • Available with wide jaw opening that utilizes nylon spools and shields. • Designed for applications where headroom is critical. • Other upper fittings available upon request.

AS-15

s l l a B

Stock No. 2003822 2003830 2003831 2003832

Ball Diameter A (mm) 129 137 181 233

Weight Each (kg.) 6.80 9.07 22.7 45.4

l u a h r e v O

k c i s s i K c M

Angular Contact Bearing Swivel Overhaul Balls AS-15

AS-15 Stock No. 2009806 2009807 2003969 2009808

Working Load Limit (t)* 1.36 2.72 4.54 7.71

Wire Rope Size (mm) 10 13 16 19

Dimensions (mm) A 102 127 175 178

B 12.7 19.1 22.4 30.2

C 12.7 19.1 26.9 39.6

D 17.5 23.9 28.4 34.0

E 19.8 30.2 39.6 53.0

F 160 217 275 349

G 104 126 165 221

H 28.4 34.0 42.9 57.0

I 31.0 38.1 47.8 63.5

J 30.2 35.1 44.5 65.0

K 28.4 36.6 46.0 66.0

L 7.85 9.65 14.2 13.5

Weight Each (kg.) 4.08 8.62 19.5 27.2

* Ultimate Load is 5 times the Working Load Limit.

310

McKissick®Overhaul Balls Top swivel design assures that the ball remains stationary if the wire line spins.

UB-550E

UB-550S

• Available in a variety of configurations: • 3.6 & 6.3 metric tonne capacities • 50, 80 & 105 kg. weights (ball only) • Crosby S-1320 Eye Hook or S-1316 SHUR-LOC® Hooks. • Utilize genuine forged Crosby hooks, bail and connector. • Quenched and Tempered • Both styles of hooks incorporate patented QUIC-CHECK® markings forged into the product which address two QUIC-CHECK® features: • Deformation Indicators and Angle Indicators. • Easy disassembly for periodic inspection and maintenance. • Design factor of 4:1. s l l a B

l u a h r e v O

k c i s s i K c M

Top Swivel Overhaul Balls with Crosby Eye Hook UB5 0E

UB-550E Stock No. 1036621 1036649 1036667 1036685 1036705 1036723

Model No. MB04BT085E MB04BT150E MB04BT200E MB07BT085E MB07BT150E MB07BT200E

Working Load Limit (t)* 3.6 3.6 3.6 6.3 6.3 6.3

Weight Each (kg.) 51.3 80.7 105 51.3 80.7 105

Dimensions (mm) A 226 268 295 226 268 295

B 533 577 602 571 615 640

C 36.6 36.6 36.6 46.0 46.0 46.0

D 33.3 33.3 33.3 42.2 42.2 42.2

E 34.5 34.5 34.5 40.9 40.9 40.9

F 28.4 28.4 28.4 28.4 28.4 28.4

G 69.9 69.9 69.9 69.9 69.9 69.9

H 57.9 57.9 57.9 57.9 57.9 57.9

J 28.4 28.4 28.4 28.4 28.4 28.4

F 28.4 28.4 28.4 28.4 28.4 28.4

G 69.9 69.9 69.9 69.9 69.9 69.9

H 57.9 57.9 57.9 57.9 57.9 57.9

J 28.4 28.4 28.4 28.4 28.4 28.4

* Ultimate Load is 4 times the Working Load Limit.

Top Swivel Overhaul Balls with SHUR-LOC® Eye Hook UB-550S Stock No. 1036630 1036658 1036676 1036694 1036714 1036732

Model No. MB04BT085E MB04BT150S MB04BT200S MB07BT085S MB07BT150S MB07BT150S

Working Load Limit (t)* 3.6 3.6 3.6 6.3 6.3 6.3

Weight Each (kg.) 51.3 80.7 105 51.3 80.7 105

Dimensions (mm) A 226 268 295 226 268 295

B 592 636 661 592 636 661

C 42.4 42.4 42.4 42.4 42.4 42.4

D 29.5 29.5 29.5 29.5 29.5 29.5

E 53.6 53.6 53.6 53.6 53.6 53.6

* Ultimate Load is 4 times the Working Load Limit.

311

McKissick Blocks

UB5 0S

rom a 2 ton capacity snatch block to a 6,000 metric ton capacity crane block, McKissick® can make a block to fit your lifting needs. In the lifting tackle industry, the name McKissick® has stood for quality for almost 80 years. McKissick’s major involvement in the block business came after 1925. At that time, laws were passed requiring safety guards on the wire line entrance to oil field blocks. It was McKissick® which developed and patented a wire line guard which could be opened to allow the reeving of the block without disassembly. Through product diversification, and over 100 patents later, McKissick® manufactures blocks and sheaves for many market uses including construction, industrial, military, energy and marine applications. From the many “Off the Shelf” items, to the non-standard “Special Engineered” block and tackle systems, McKissick® prides itself on meeting your lifting needs.

McKissick®, a part of The Crosby Group, Inc. since 1959, is not only one of the world’s largest producers of blocks, they also manufacture the world’s largest block and tackle systems. Notable examples of custom blocks manufactured by McKissick® include those used to set the NASA space shuttle on the back of the 747 carrier jet. The largest and most impressive example of McKissick’s capabilities is the M-5000 block (6,000 metric ton capacity) for McDermott’s DB-102 derrick barge. McKissick’s latest accomplishment was receiving accreditation for ISO 9001. That, in addition to being an API Q1 producer, reinforces McKissick’s, as well as Crosby’s commitment to continued quality. McKissick® Products, another reason to say “When buying Crosby, you’re buying more than product, you’re buying Quality.”

www. the crosbygroup.com crosbygroup@thecrosbygroup.com

McKissick® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

k c i s s i K c M

418, 419 & 404 SNATCH BLOCKS

New Improved Light Champion Forged alloy heat treated hooks. Forged steel swivel tees, yokes and shackles. Hook and shackle assemblies on 114mm through 356mm sizes can be interchanged. Can be furnished with bronze bushings or roller bearings. Opening feature permits insertion of rope while block is suspended from gin-pole. 76mm thru 457mm 418 and 419 blocks have exclusive bolt retaining spring to assure no lost bolts. Can be furnished with hook latch. Pressure lube fittings. 76mm - 254mm feature dual rated wireline sheaves. Fatigue rated 418

418 WITH HOOK

Sheave 418 Diameter Bearing with Code (mm) Hook * 76.0 BB ** 76.0 BB 108038 **114 BB 108065 152 BB 108127 152 RB 108154 203 BB 108225 203 RB 108252 254 BB 108323 254 RB 108350 305 BB 169169 305 RB 199911 305 BB 108421 305 RB 108458 356 BB 194920 356 RB 199948 356 BB 108528 356 RB 108546 406 BB 199975 406 RB 200008 406 BB 108608 406 RB 108626 457 BB 200099 457 RB 200151 457 BB 108644 457 RB 108662 418

419 WITH SHACKLE

Stock No. 419 with Shackle 109091 109037 † 109064 109126 109153 109224 109251 109322 109359 202961 169347 109420 109457 169356 167857 109527 109545 203041 203087 109607 109625 203130 203176 109643 109661

404 Tail Board 102016 102025 102098 102114 102169 102187 102230 102258 178890 178934 102301 102329 -

Weight Each (kg.) Wire Rope Working 418 419 404 Rep. Rep. Size Load Limit with with Tail Sheave Latch (mm)* (t)† Hook Shackle Board Stock No. Stock No. 8-10 2 1.90 2023196 8-10 2 2.04 1.81 1.22 2023196 1096421 10-13 4 5.31 5.44 2.99 2023183 1096468 16-19 8 12.2 12.6 6.80 2023137 1096562 16-19 8 12.2 12.6 6.80 2023143 1096562 16-19 8 15.0 15.4 9.53 2023153 1096562 16-19 8 15.0 15.4 9.53 2023163 1096562 16-19 8 18.6 19.1 13.2 2023174 1096562 16-19 8 18.6 19.1 13.2 2023181 1096562 16 8 21.8 22.2 16.3 2023227 1096562 16 8 21.8 22.2 16.3 2023248 1096562 19 8 21.8 22.2 16.3 2023235 1096562 19 8 21.8 22.2 16.3 2023236 1096562 16 8 24.9 25.4 2028377 1096562 16 8 24.9 25.4 2026445 1096562 19 8 24.9 25.4 2028378 1096562 19 8 24.9 25.4 2026444 1096562 19 15 59 61 2023694 1096609 19 15 59 61 2023702 1096609 22 15 59 61 2023690 1096609 22 15 59 61 2023698 1096609 22 15 68 70 2023718 1096609 22 15 68 70 2023728 1096609 26 15 68 70 2023709 1096609 26 15 68 70 2023720 1096609

* May be furnished in other wire rope sizes. † Ultimate Load is 4 times the Working Load Limit. ** Available in Bronze Bushed only. 76 and 114 mm have self lubricating Bronze Bushing. † Fitted with 1-1/4" (32mm) ID Swivel Eye. ‡ May be furnished in other rope sizes.

404 TAIL BOARD

NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

313

McKissick Blocks

• • • • • • • • • •

McKissick® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

k c i s s i K c M

420, 421 & 406 SNATCH BLOCKS

Champion • • • • • • • • • • •

Hooks and side plates are forged alloy steel and heat treated. Shackles and yokes are forged and heat treated steel. All parts are forged. Side plates are designed to eliminate possibility of rope jamming. Can be furnished with bronze bushings or sealed roller bearings. Opening feature permits insertion of rope while block is suspended from gin-pole. Can be furnished with S-4320 hook latch. Pressure lube fittings. Hook and shackle assemblies can be interchanged. Blocks furnished with dual rated wireline sheaves. Fatigue Rated 420

420 WITH HOOK

Sheave 420 Diam. Bearing with (mm) Hook Code 152 BB 169374 152 RB 169392 203 BB 169418 203 RB 169445 254 BB 110221 254 RB 110258

Stock No. 421 with Shackle 169481 204120 169515 204193 110720 110757

406 Tail Board 167973 167982 167991 168008 103186 103202

Weight Each (kg.) Wire Rope Working 420 421 406 Rep. Rep. Size Load Limit with with Tail Sheave Latch (mm) † (t)* Hook Shackle Board Stock No. Stock No. 19-22 12 18.1 21.8 10.9 2023262 1096609 19-22 12 18.1 21.8 10.9 2023270 1096609 19-22 15 23.1 25.9 13.6 2023386 1096609 19-22 15 23.1 25.9 13.6 2023406 1096609 19-22 15 28.6 31.3 19.1 2023420 1096609 19-22 15 28.6 31.3 19.1 2023430 1096609

* Ultimate Load is 4 times the Working Load Limit. † May be furnished in other Wire Rope sizes. NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

421 WITH SHACKLE

406 TAIL BOARD

314

McKissick® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

k c i s s i K c M

430, 431 & 407 SNATCH BLOCKS

Super Champion Drop forged, heat treated swivel hook or swivel shackle. Hook and shackle assemblies on 203mm through 356mm sizes can be interchanged. Can be furnished with bronze bushings or roller bearings. Pressure lube fittings. 203mm thru 356mm 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts. Can be furnished with hook latch. 203mm and 254mm models furnished with dual rated wireline sheaves. Fatigue Rated 430

430 WITH HOOK

431 WITH SHACKLE

Sheave Diam. (mm) 203 203 254 254 305 305 305 305 356 356 356 356 457 457 457 457 508 508 508 508 610 610 610 610

Bearing Code BB RB BB RB BB RB BB RB BB RB BB RB BB RB BB RB BB RB BB RB BB RB BB RB

430 with Hook 120023 120041 120096 120112 208536 208554 120176 120194 208572 208590 120256 120274 208689 208732 119482 119491 208750 208787 119507 119516 208812 208858 119525 119534

Stock No. 431 with Shackle 121022 121040 121095 121111 169917 209303 121175 121193 209321 170424 121255 121273 209410 209465 119561 119570 209483 169864 119589 119598 209526 209553 119605 119614

407 Tail Board 103523 103541 103603 103621 184375 184393 103685 103701 184419 184437 103765 103783 184552 184605 119641 119650 184623 184650 119669 119678 184687 184721 119687 119696

Wire Rope Size (mm) 26-28 26-28 26-28 26-28 26 26 28 28 26 26 28 28 26 26 28 28 28 28 32 32 28 28 32 32

Working Load Limit (t)* 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 30 30 30 30 30 30 30 30

Weight Each (kg.) 430 431 407 with with Tail Hook Shackle Board 34.0 39.5 19.1 34.0 39.5 19.1 40.4 45.8 24.9 40.4 45.8 24.9 46.7 52 31.8 46.7 52 31.8 46.7 52 31.8 46.7 52 31.8 56 61 40.8 56 61 40.8 56 61 40.8 56 61 40.8 109 118 75 109 118 75 109 118 75 109 118 75 170 181 98 170 181 98 170 181 98 170 181 98 204 215 132 204 215 132 204 215 132 204 215 132

Rep. Sheave Stock No. 2023462 2023818 2026861 2023526 2023556 2023563 2023552 4104944 2023571 2023583 2023565 2023579 2023609 2023623 2023603 2023611 2023630 2023621 2023626 2023636 2023648 2023661 2023644 2023659

Rep. Latch Stock No. 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1096657 1090143 1090143 1090143 1090143 1090189 1090189 1090189 1090189 1090189 1090189 1090189 1090189

407 TAIL BOARD

315

McKissick Blocks

• • • • • • • •

McKissick® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

k c i s s i K c M

408 & 409 SNATCH BLOCKS

Light Champion Double Sheave • • • • • • • •

Light champion snatch block as a double sheave block. Drop forged swivel hook or swivel shackle. Can be furnished with bronze bushings or roller bearings. Opening feature permits easy insertion of wire rope in both sheaves with removal of one bolt. Can be furnished with hook latch. Pressure lube fittings. 114mm - 254mm models furnished with dual rated wireline sheaves. Fatigue Rated 408

408 WITH HOOK

Sheave Diam. (mm) † 114 152 152 203 203 254 254 305 305 305 305 356 356 356 356

Bearing Code BB BB RB BB RB BB RB BB RB BB RB BB RB BB RB

Stock No. 408 409 with with Hook Shackle 104023 105022 104103 105102 104121 105120 104185 105184 104201 105200 104265 105264 104283 105282 194578 195185 168044 195229 104345 105344 104363 105362 194621 195247 194649 195265 104425 105424 104443 105442

Wire Rope Size (mm) ‡ 10-13 16-19 16-19 16-19 16-19 16-19 16-19 16 16 19 19 16 16 19 19

Working Load Limit (t)* 4 12 12 12 12 12 12 12 12 12 12 12 12 12 12

Weight Each (kg.) 408 409 with with Hook Shackle 8.16 8.16 20.4 22.7 20.4 22.7 24.0 26.3 24.0 26.3 31.8 34.0 31.8 34.0 40.8 43.1 40.8 43.1 40.8 43.1 40.8 43.1 45.4 47.6 45.4 47.6 45.4 47.6 45.4 47.6

Rep. Sheave Stock No. 2023183 2023137 2023143 2023153 2023163 2023174 2023181 2023227 2023248 2023235 2023236 2028377 2026445 2028378 2026444

Rep. Latch Stock No. 1096468 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609 1096609

* Ultimate Load is 4 times the Working Load Limit. † Available in Bronze Bushed only. ‡ May be furnished in other Wire Rope sizes.

409 WITH SHACKLE

316

NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

McKissick® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

k c i s s i K c M

416, 417 & 402 ALLOY SNATCH BLOCKS

All Alloy Snatch Blocks

416 WITH HOOK

• Entire block made from heat treated alloy steel. Use of heat treated alloy gives block only 60% of the weight of blocks of comparable capacities. • Available with a bronze bushed or roller bearing sheaves. • Easy opening feature of "Champion" blocks retained. • Hook and shackle assemblies can be interchanged. • Pressure lube fittings. • Can be furnished with hook latch. • Blocks furnished with dual rated wireline sheaves. • Fatigue Rated 416

Sheave Diameter (mm) 152 152 203 203 254 254

402 Alloy Tail Board 179238 179283 179318 179363 179434 179498

Weight Each (kg.) Wire Working 416 417 402 Rope Load Alloy Alloy Alloy Size Limit with with Tail (mm) † (t)* Hook Shackle Board 19-22 12 11.8 12.20 6.80 19-22 12 11.8 12.20 6.80 19-22 12 15.0 15.40 9.50 19-22 12 15.0 15.40 9.50 19-22 12 18.6 19.10 13.20 19-22 12 18.6 19.10 13.20

Rep. Sheave Stock No. 2023135 2023142 2023149 2023161 2023172 2023180

Rep. Latch Stock No. 1096609 1096609 1096609 1096609 1096609 1096609

* Ultimate Load is 4 times the Working Load Limit. † May be furnished in other wire rope sizes. NOTE: When ordering, please specify: size, block number, hook or shackle, bronze bushed or roller bearing, and wire rope size.

McKissick Blocks

417 WITH SHACKLE

Bearing Code BB RB BB RB BB RB

416 Alloy with Hook 193427 193472 193490 193542 193613 193677

Stock No. 417 Alloy with Shackle 168972 193757 168990 193819 193882 193935

402 TAIL BOARD

317

Lebus® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

s u b e L

L-160 Series Heavy Duty Snatch Blocks • • • • • • • •

L-5-H

Hook is Forged Alloy Steel — Quenched and Tempered. Designed for fast, efficient line changes. All parts are forged. Beaded side plate prevents rope from jamming. Available with hook, shackle or tailboard (pin only). Can be furnished with hook latch. Blocks furnished with dual rated wireline sheaves. Fatigue Rated

Block No. L-5-H L-5-H L-5-S L-5-S L-5-T L-5-T L-6-H L-6-H L-6-S L-6-S L-6-T L-6-T

Bearing Code BB RB BB RB BB RB BB RB BB RB BB RB

L-160 Stock No. 599506 599515 599524 599533 599542 599551 599560 599579 599588 599597 599604 599613

Fitting Hook Hook Shackle Shackle Tailboard Tailboard Hook Hook Shackle Shackle Tailboard Tailboard

Sheave Diam. (mm) 127 127 127 127 127 127 149 149 149 149 149 149

Working Load Limit (t)* 6 6 6 6 6 6 12 12 12 12 12 12

Wire Rope Size (mm) 10-13 10-13 10-13 10-13 10-13 10-13 16-19 16-19 16-19 16-19 16-19 16-19

Weight Each (kg.) 6.94 6.94 6.80 6.80 4.54 4.54 14.4 14.4 13.6 13.6 8.07 8.07

Rep. Sheave Stock No. 2028071 2028075 2028071 2028075 2028071 2028075 2028085 2028087 2028085 2028087 2028085 2028087

Rep. Latch Stock No. 1096468 1096468 1096609 1096609 -

* Ultimate Load is 4 times the Working Load Limit.

L-5-S

L-5-T

318

Lebus® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

s u b e L

L-170 Series General Purpose Snatch Blocks • • • • • • •

Hook is Forged Alloy Steel — Quenched and Tempered. All parts are forged. Opened and closed in seconds without the use of tools. Available with hook, shackle or tailboard (pin only). Either wire or manila rope may be used. Can be furnished with an hook latch. Blocks furnished with dual rated wireline sheaves.

L-45-H Block No. L-45-H L-45-H L-45-S L-45-S L-45-T L-45-T

Bearing Code BB RB BB RB BB RB

L-170 Stock No. 599800 599819 599828 599837 599846 599855

Fitting Hook Hook Shackle Shackle Tail Board Tail Board

Sheave Diam. (mm) 105 105 105 105 105 105

Working Load Limit (t)* 4.5 4.5 4.5 4.5 4.5 4.5

Wire Rope Size (mm) 10-13 10-13 10-13 10-13 10-13 10-13

Manila Rope Size (mm) 32 32 32 32 32 32

Weight Each (kg.) 5.90 5.90 5.90 5.90 4.08 4.08

Rep. Sheave Stock No. 2023183 2028063 2023183 2028063 2023183 2028063

Rep. Latch Stock No. 1096468 1096468 -

* Ultimate Load is 4 times the Working Load Limit. NOTE: When Ordering, specify either roller bearing or bronze bushed sheaves.

L-45-S

McKissick Blocks

L-45-T

319

Crosby® Snatch Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

h c t a n S

On Pages 332-339

y b s o r C

C-700 SNATCH BLOCKS

General Purpose Snatch Blocks • • • • •

Unique locking device permits disengagement by simply folding hook. Formed steel side plates with capacity stamped permanently in place. Self-Lubricating bronze bushings. Can be furnished with an hook latch. Furnished with dual rated wireline sheaves. Sheave Diam. (mm) 152 203

Block No. 10611 10811

C-700 Stock No. 260014 261013

Working Load Limit (t)* 2 3

Wire Rope Size (mm) 10-13 13-16

Weight Each (kg.) 5.44 8.44

Wire Rope Size (mm) 19-22

Weight Each (kg.) 12.7

Fitting Swivel Hook Swivel Hook

Rep. Latch Stock No. 1096468 1096515

* Ultimate Load is 4 times the Working Load Limit.

s k c o l B

h c t a n S

y b s o r C

C-720 SNATCH BLOCKS

Heavy Duty Utility Snatch Block • • • • • •

Forged steel sheaves, bronze bushings. Drop forged steel hook. Pressure lube fitting. Self-locking style. Locks with hook load. Can be furnished with S-4320 hook latch. Furnished with dual rated wireline sheave. Sheave Diam. (mm) 152

Block No. 60611

C-720 Stock No. 280010

Working Load Limit (t)* 6.35

Fitting Swivel Hook

Rep. Latch Stock No. 1096562

* Ultimate Load is 3.5 times the Working Load Limit.

s k c o l B

h c t a n S

y b s o r C

C-720 TOGGLE BLOCK

Toggle Block (Tail Board) • Forged steel sheaves, bronze bushings. • Pressure lube fitting. • Furnished with dual rated wireline sheave. Sheave Diam. (mm) 152

Block No. 70610

C-720 TB Stock No. 290018

Working Load Limit (t)* 6.35

Wire Rope Size (mm) 19-22

Weight Each (kg.) 9.53

Fitting Tailboard

* Ultimate Load is 3.5 times the Working Load Limit.

320

McKissick® Special Application Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

n o i t a c i l p p A

l a i c e p S

On Pages 332-339

k c i s s i K c M

Hay Fork Pulleys with Swivel Hook or Swivel Eye • • • • • • •

Forged steel eyes and hooks. Available Painted or Zinc Plated. One piece pressed steel shells. Edges well rounded to prevent chaffing of rope. Can be furnished with hook latch. Furnished with roller bearings. Pressure lube fittings. Sheave Diameter (mm) 114 114 114 114 203 152 152 152 152

HF-1

Block No. HF-1 HF-2 HF-3 HF-4 HF-5 HF-11 HF-12 HF-13 HF-14

Hay Fork Pulleys Stock No. Painted Zinc Plated 170022 170594 170086 170629 170148 170656 170200 170683 170264 170380 170442 170503 170567 -

Working Load Limit (t)* .91 .91 .91 .91 1.81 1.81 1.81 1.81 1.81

Standard Rope Size (mm) 32 MR 32 MR 13 WR 13 WR 13 WR 38 MR 38 MR 16 WR 16 WR

End Fitting Swivel Hook Swivel Eye Swivel Hook Swivel Eye Swivel Eye Swivel Hook Swivel Eye Swivel Hook Swivel Eye

Weight Each (kg.) 4.99 5.44 13.6 15.9

Connection Swivel Eye Swivel Eye Swivel Eye Swivel Eye

Weight Each (kg.) 2.72 2.72 2.72 2.72 4.99 4.99 4.99 4.99 4.99

* Ultimate Load is 4 times the Working Load Limit. Rope Code: MR - Manila Rope, WR - Wire Line.

HF-2 s k c o l B

n o i t a c i l p p A

l a i c e p S

k c i s s i K c M

Tong Blocks

Sheave Diameter (mm) 152 203 254 305

171 Stock No. 171012 171058 171101 171156

Working Load Limit (t)* .45 .91 2.27 2.27

Wire Rope Size (mm) 19 19 19 19

* Ultimate Load is 4 times the Working Load Limit.

171 s k c o l B

Block No. TB-1 TB-1 TB-1 TB-1

McKissick Blocks

• Steel sheaves with roller bearings and pressure lubrication. • Forged steel eyes and hooks. • Easy opening feature shown available in 8" (203mm) size only.

n o i t a c i l p p A

l a i c e p S

k c i s s i K c M

Lay Down Blocks • All steel construction, steel sheaves mounted on antifriction bearings, grooved for maximum of 19mm wire line. • Used to lay down drill pipe. • Hook made to fit into end of drill pipe, handy dead end becket for returning block — hooks have handle for disengagement. Sheave Diameter (mm) 114 152

Block No. 443 443

443 Stock No. 171414 171432

Working Load Limit (t)* .23 .45

Wire Rope Size (mm) 13 19

Weight Each (kg.) 5.44 7.71

Type Block Regular Regular

* Ultimate Load is 4 times the Working Load Limit.

443

321

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

M-491 Tower / Derrick Hoist Blocks New design provides the dependability of standard McKissick® snatch blocks, along with features that make it perfect for the challenging needs of Tugger Hoist and Tower Erection applications. • A wide variety of configurations: • 4, 8, 12 or 15 metric ton capacity • 10mm to 25mm wire line sizes • Painted or Galvanized finish

• • • • • • • • • • • • •

203mm and 254mm blocks furnished with dual rated wireline sheaves. Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. Sheave lubrication through center pin for easy maintenance. Design factor of 4 to 1 All blocks 356mm and larger are furnished with McKissick® Roll Forged™ sheaves with flame hardened grooves. Recessed sideplate design reduces the gap between the sheave rim and the sideplate, allowing the sheave assembly to be captured in the block if loss of center pin occurs. Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster line speeds than recommended with standard snatch blocks. Shackle fitting swivels for easy positioning. Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow any applicable Federal, local and industry standards. Tugger/Derrick applications: API RP54 Tower applications: OSHA directive CPL 2-1.36 Holes through side plates are available for secondary block securement device. Manufactured by an API Q1 Certified facility Working Load Limit (t)* 4 8 8 12 12 12 15 15

Sheave Diameter (mm) 203 254 254 254 356 356 406 406

Wire Rope Size (mm) 10 - 13 10 - 13 13 - 14 13 - 14 16 19 22 25

M-491S Stock No. Painted 2020161 2020806 2020824 2021118 2021136 2021154 2021172 2021190

M-491G Stock No. Galvanized 2020170 2020815 2020833 2021127 2021145 2021163 2021181 2021199

Weight Each (kg.) 16 25 25 25 43 43 68 48

* Ultimate Load is 4 times the Working Load Limit

322

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

70 SERIES BLOCKS

McKissick® Oilfield Tubing Blocks utilizing new Split Nut Retention System

Also available with Rod Hook Clevis

• Revolutionary new retention system eliminates conventional threaded nut and problems associated with thread corrosion. • Exclusive E-Z opening guards, no bolts to pull out and lose. Feature gives fastest possible exposure of sheave cluster for quick reeving. • Extremely short overall length, extra weight, excellent balance for fast non-wobbling falls. • Extra large sealed sheave bearing diameters for fully rated capacities. • Roller thrust bearing in hook. • Duplex hook for easy elevator operation, locks in eight positions. • Convenient rod hook clevis available. • Completely streamlined, no projections. • McKissick® Roll-Forged™, flame hardened sheaves, grooved for proper wire line size. Contact Crosby for additional wire line sizes. • Threaded hook parts precision machined and individually fitted for maximum performance. • All blocks available with additional cheek weights.

72A

Stock No. 111792 111890 111818 111916 111827 111925 128793 125545

Block Config.* 20" 73 20" 73-A 24" 73 24" 73-A 30" 73 30" 73-A 30" 74 30" 74-A

70 Series Tubing Blocks Working Load Limit (t) 67.5 67.5 90 90 135 135 135 135

Wire Line Size (mm) 22 22 25 25 28 28 28 28

Weight Each (kg.) 803 823 1195 1247 2018 1845 1996 2024

* Spring loaded duplex hook assuring ample travel for efficient tubing operations. No load carrying threads. s k c o l B

g n i c i v r e S

d l e i f l i O

k c i s s i K c M

Stock No. 112130 112238 112149 112247 112158 112256 112167 112265 112176 112274 117475 117484 112185 112283 117493 117509

Block Config. 17" 83 17" 83-A 20" 82 20" 82-A 20" 83 20" 83-A 24" 82 24" 82-A 24" 83 24" 83-A 24" 84 24" 84-A 30" 83 30" 83-A 30" 84 30" 84-A

80 Series Tubing Blocks Working Load Limit (t) 45 45 45 45 67.5 67.5 67.5 67.5 90 90 90 90 135 135 135 135

Wire Line Size (mm) 22 22 22 22 22 22 25 25 25 25 25 25 28 28 28 28

McKissick Blocks

80 SERIES BLOCKS Weight Each (kg) 491 503 510 564 727 753 816 830 998 991 1225 1247 1225 1617 1746 1873

323

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

WELL LOGGER'S BLOCKS

Floor Blocks & Top Blocks • • • • •

Alloy aluminum housing for maximum strength and minimum weight. Conductor cable ONLY is recommended for use with Well Logger's Blocks. For use in high speed well logging, perforating, etc. Extra large double row, pre-adjusted sealed tapered bearing. Quick opening pin for fast string-up, light weight for easy handling. FLOOR BLOCKS flo r

Sheave Diameter (mm) 178 254 254 305 356 356 508 610

Block No. 475 473 475 475 475 477 477 477

Floor Block Stock No. 180020 180128 180253 180440 180618 169784 191072 191107

Working Load Limit (t)* 1.35 1.35 2.25 2.25 2.25 5.4 5.4 9.0

Conductor Cable Size (mm)† 5 5 8 8 8 6 6 8

Weight Each (kg) 4.5 5.0 9.5 10.8 19.5 26.3 31.8 58.9

Connection Swivel Hanger Swivel Hanger Swivel Hanger Swivel Hanger Swivel Hanger Swivel Clevis Swivel Clevis Swivel Clevis

Conductor Cable Size (mm) 8 5 8 8 8

Weight Each (kg) 4.5 4.5 9.5 10.8 19.5

Connection Stinger Pin Stinger Pin Stinger Pin Stinger Pin Stinger Pin

* Ultimate Load is 4 times the Working Load Limit. † Other cable sizes available upon request.

TOP BLOCKS top

Sheave Diameter (mm) 178 254 254 305 356

Block No. 476 474 476 476 476

Top Block Stock No. 180075 180173 180333 180529 180707

Working Load Limit (t)* 2.25 2.25 3.6 3.6 3.6

* Ultimate Load is 4 times the Working Load Limit.

324

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

Crown Blocks • • • • • •

McKissick® Roll-Forged™ sheaves with flame hardened grooves. Double row pre-adjusted sealed tapered bearings mounted on a steel shaft. Heavy center and side plates for proper support of center pin. Pre-assembled units for rapid attachment to crown assembly for installation on derrick. On multiple sheave assemblies, one sheave can be grooved for sand line on request. Other sizes available upon request. Sheave Diameter (mm) 610 610 610 610 610 610 610 762 762 762 762 762

Block No. 241 242 243 731 732 733 734 741 742 743 744 745

Crown Block Stock No. 351158 351167 351176 351185 351194 351201 351210 351229 351238 351247 351256 351265

No. of Sheaves 1 2 3 1 2 3 4 1 2 3 4 5

Working Load Limit (t) 13.5 27 40.5 31.5 67.5 90 113 36 72 99 126 153

Standard Wire Rope Size (mm)* 22 22 22 25 25 25 25 28 28 28 28 28

Weight Each (kg) 91 126 170 91 159 238 327 147 254 363 445 528

McKissick Blocks

* May be furnished in other wire rope sizes.

325

SEE APPLICATION AND WARNING INFORMATION On Pages 332-339

Para Español: www.thecrosbygroup.com

RJ Style Drilling Blocks • Capacities Available: 250 & 350 Tons • Double row, pre-adjusted tapered bearings with seals. • Blocks contain McKissick® Roll-Forged® sheaves with flame hardened grooves • Grooves are API profile • Separate lubrication channel to each sheave. • Easy opening guards for quick string-up (no bolts to pull out and lose). • Each hook block is fitted with position lock and swivel lock assemblies. • Additional weights available upon request. • Manufactured to the requirements of API 8C, including all documentation. • Each block is individually serialized for full traceability. • Furnished with Certificate of Conformance. • Hook is spring loaded with hydraulic snubber. • Minimum design temperature of -20 degree C (-4 degree F). • Standard top coat finish is safety orange enamel. • Other paint colors and systems are available on request. • Individual parts are primer coated on exposed surfaces. • Combination hook blocks have interchangeable parts with BJ type McKissick® blocks built up to 1982. • Contact Crosby Customer Service for details. s k c o l B

g n i l l i r D

d l e i f l i O

k c i s s i K c M

RJ Style Drilling Blocks rjblock

Model No. 868 869 870

RJ Block Stock No. 2024318 2024317 2024301

Working Load Limit (t) 250 250 350

Sheave Diameter (mm) 914 1067 1067

No. of Sheaves 5 5 5

Standard Wire Rope Size (mm)* 28 28 32

Dimensions (mm) A 3288 3440 3747

B 2926 3078 3366

C 2554 2707 2883

D 965 1118 1118

E 616 616 616

F 914 1067 1067

G 95.3 95.3 95.3

H 73.2 73.2 82.5

J 502 502 559

K 47.8 47.8 63.5

L 102 102 102

Weight Each (kg) 4762 4990 5761

* May be furnished in other wire rope sizes.

326

McKissick® Blocks

McKissick® Oilfield Drilling Blocks

McKissick® Oilfield Drilling Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com

On Pages 332-339

RP Style Traveling Blocks • Capacities Available: 500, 750 and 1000 Tons • Double row, pre-adjusted tapered bearings with seals. • Blocks contain McKissick® Roll-Forged® sheaves with flame hardened grooves • Grooves are API profile • • • • •

Separate lubrication channel to each sheave. Easy opening guards for quick string-up (no bolts to pull out and lose). Bail design to adapt to comparable capacity drilling equipment Additional weights available upon request. Manufactured to the requirements of API 8C, including all documentation. • Each block is individually serialized for full traceability. • Furnished with Certificate of Conformance.

• Minimum design temperature of -20 degree C (-4 degree F). • Standard top coat finish is safety orange enamel. • Other paint colors and systems are available on request. • Individual parts are primer coated on exposed surfaces. • Block side plates can be drilled to adapt customer supplied equipment. • Easy bail pin removal. s k c o l B

g n i l l i r D

d l e i f l i O

k c i s s i K c M

RJ Style Drilling Blocks Working Load Limit (t) 500 750 1000

Sheave Diameter (mm) 1524 1524 1829

Standard Wire Rope Size (mm)* 35 38 44

Weight Each (kg) 7303 9888 15240

Dimensions (mm) A 2597 2572 3156

B 2140 2191 2667

C 356 381 489

D 1524 1524 1829

E 1562 1562 1892

F 832 991 1327

H 152 229 229

J 88.9 114 127

K 102 127 159

L 318 368 476

M 324 432 533

McKissick Blocks

* May be furnished in other wire rope sizes.

327

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

Guy Line Blocks • Used on guy-lines to gain mechanical advantage through rapid take-up, taking less pull to guy down. • Laser burned steel side plates, cold-finished steel pins, 6" steel sheaves.

guy

Block No. 458 458H 459 459H

No. of Sheaves 1 1 2 2

Stock No. 171619 239067 171637 239076

Working Load Limit (t) 5 8 10 12

Sheave Diameter (mm) 152 152 152 152

Standard Wire Rope Size (mm)* 13 16 13 16

Weight Each (kg) 9.5 11.3 12.7 14.1

* May be furnished in other wire rope sizes.

458

459

328

McKissick® Oilfield Servicing Blocks SEE APPLICATION AND WARNING INFORMATION Para Español: www.thecrosbygroup.com s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 332-339

k c i s s i K c M

ALL ALLOY

High Capacity Snatch Blocks

434 WITH HOOK

435 WITH SHACKLE

• Entire block made from heat treated alloy steel. Use of heat treated alloy gives block only 60% of the weight of blocks of comparable capacities. • Available with bronze bushed sheaves. • Easy opening feature of "Champion" blocks retained. • Pressure lube fittings. • Can be furnished with hook latch. • Fatigue Rated

Sheave Diameter (mm) 203 203 254 254 305 305 356 356 305

Bearing Code BB BB BB BB BB BB BB BB BB

434 with Hook 208894 302522 208901 302531 208929 302540 208938 302559 -

Stock No. 435 with Shackle 168295 302568 208956 302577 208974 302586 208983 302595 8027291

401 Tail Board 179149 302602 179158 302611 179176 302620 179185 302639 8027292

Wire Rope Size (mm)* 25 28 25 28 25 28 25 28 28

Working Load limit (t) +* 25 25 25 25 30 30 30 30 60

434 with Hook 41 41 49 49 75 75 82 82 -

Weight Each (kg) 435 401 with Tail Shackle Board 46 23 46 23 54 29 54 29 83 43 83 43 90 50 90 50 143 73

* May be furnished in other wire rope sizes. + Ultimate Load is 4 times the Working Load Limit. NOTE: When ordering, please specify: size, blocks number, hook or shackle, and wire rope size.

McKissick Blocks

401 TAIL BOARD

329

Revolutionary new retention system eliminates conventional threaded nut and problems associated with thread corrosion. Fatigue Rated Design allows for easy inspection as required by API RP-8B. Allows repeated installation and removals without risk of damage to hook/nut interface. Redundant secured and sealed fasteners Quick delivery Can be purchased in a variety of configurations that can be used to retro-fit existing McKissick速 80 Series Tubing blocks - in the field or in the shop. Hook and nut assembly that fits existing cases Hook and case assembly that bolts into existing block

P.O. Box 3128 Tulsa, Ok 74101 (918) 834-4611 Fax: (918) 832-0940 www.thecrosbygroup.com crosbygroup@thecrosbygroup.com

Patent Pending

Train_info.fm Page 25 Tuesday, February 14, 2006 10:16 AM

Crosby Training Information s k c o l B

k c i s s i K c M

This seminar and support materials were developed for the Crosby product line. The materials are intended to be used as classroom references in training sessions conducted by Authorized Crosby Instructors. Crosby provides instruction only on how to use the material. Crosby does not select or determine whether each attendee is qualified to be a trainer. The management of companies requesting the Crosby training is responsible for determining the capability and suitability of all trainers in their employment.

API RP-2D Basic Rigging Requirements Those who attend Day One, Course #OE-001 will receive: Certificate of Completion A Crosby Workbook API RP-2D Crosby’s API laminated pocket reference guide Those who attend the full two-day program, Course #OE-001 and #OE-002, will receive: Same materials as shown above Crosby General Catalog on CD-Rom Crosby API CD-Rom Lift Guide (Computer Based Course) The ability to receive a “Crosby Authorized Trainer” certificate valid for four years A CD-Rom with PowerPoint files that can be used to print a basic set of overhead slides for a seven hour presentation. You can create the overhead transparency slides at your facility or at a print shop. The ability to order Crosby training materials at reduced prices.

Land Based Energy Operations Training Information Those who attend Day One, Course #LB-001 will receive: Certificate of Completion A Crosby Seminar Workbook: Land Based Energy Operations, Edition 1 Crosby’s Land-Based laminated pocket reference guide Those who attend the full two-day program, Course #LB-001 and #LB-002, will receive: Same materials as shown above Crosby General Catalog on CD-Rom Crosby CD-Rom Lift Guide (Computer Based Course) The ability to receive a “Crosby Authorized Trainer” certificate valid for four years A CD-Rom with PowerPoint files that can be used to print a basic set of overhead slides for a seven hour presentation. You can create the overhead transparency slides at your facility or at a print shop. The ability to order Crosby training materials at reduced prices. Classroom training is only a small part of the needed qualifications. Demonstrated ability on the job is equally important. Once the certificate request form is signed by a supervisor or manager and all requirements are met, we will send a certificate as a “Crosby Authorized Trainer” valid for four years.

331

TBM_code.fm Page 312 Saturday, February 4, 2006 8:43 AM

Tackle Block and Sheave Assembly Warning, Use & Maintenance Information WARNING • A potential hazard exists when lifting or dragging heavy loads with tackle block assemblies. • Failure to design and use tackle block systems properly may cause a load to slip or fall - the result could be serious injury or death. • Failure to design lifting system with appropriate sheave assembly material for the intended application may cause premature sheave, bearing or wire rope wear and ultimate failure - the result could be serious injury or death • A tackle block system should be rigged by a qualified person as defined by ANSI/ASME B.30. • Instruct workers to keep hands and body away from block sheaves and swivels - and away from "pinch points" where rope touches block parts or loads. • Do not side load tackle blocks. • See OSHA Rule 1926.550(g) for personnel hoisting by cranes and derricks, and OSHA Directive CPL 2-1.36 Interim Inspection Procedures During Communication Tower Construction Activities. Only a Crosby or McKissick® Hook with a PL latch attached and secured with a bolt, nut and cotter pin (or toggle pin) or a PL-N latch attached and secured with toggle pin; or a Crosby hook with an S-4320 latch attached and secured with cotter pin or bolt, nut and pin; or a Crosby SHUR-LOC® Hook in the locked position may be used for any personnel hoisting. A hook with a Crosby SS-4055 latch attached shall NOT be used for personnel lifting. • Instruct workers to be alert and to wear proper safety gear in areas where loads are moved or supported with tackle block systems. • Use only genuine Crosby parts as replacement. • Read, understand, and follow these instructions to select, use and maintain tackle block systems.

General Cautions or Warnings Ratings shown in Crosby Group literature are applicable only to new or "in as new" products. Working Load Limit ratings indicate the greatest force or load a product can carry under usual environmental conditions. Shock loading and extraordinary conditions must be taken into account when selecting products for use in tackle block systems. Working Load Limit ratings are based on all sheaves of tackle block system being utilized. If all sheaves are not utilized, balance must be maintained, and the Working Load Limit must be reduced proportionally to prevent overloading sheave components. Changes from full sheave reeving arrangement should be only at the recommendation of a qualified person, and incorporate good rigging practices. In general, the products displayed in Crosby Group literature are used as parts of a system being employed to accomplish a task. Therefore, we can only recommend within the Working Load Limits, or other stated limitations, the use of products for this purpose. The Working Load Limit or Design (Safety) Factor of each Crosby product may be affected by wear, misuse, overloading, corrosion, deformation, intentional alteration, and other use conditions. Regular inspection must be conducted to determine whether use can be continued at the catalog assigned WLL, a reduced WLL, a reduced Design (Safety) Factor, or withdrawn from service. Crosby Group products generally are intended for tension or pull. Side loading must be avoided, as it exerts additional force or loading which the product is not designed to accommodate. Always make sure the hook supports the load. The latch must never support the load. Welding of load supporting parts or products can be hazardous. Knowledge of materials, heat treatment, and welding procedures are necessary for proper welding. Crosby Group should be consulted for information. Crane component parts, i.e. the boom, block, overhaul ball, swivel, and wire ropes are metallic and will conduct electricity. Read and understand OSHA standard covering crane and derrick operations (29 CFR 1926.550 SUBPART N) before operating proximate to power lines.

Important:

Definitions

For maximum safety and efficiency, tackle block and sheave systems must be properly designed, used, and maintained. You must understand the use of tackle block components and sheaves in the system. These instructions provide this knowledge. Read them carefully and completely. Some parts of these instructions must use technical words and detailed explanations. NOTE: If you do not understand all words, diagrams, and definitions - DO NOT TRY TO DESIGN OR USE A TACKLE BLOCK OR SHEAVE SYSTEM! For further assistance, call: In U.S.A. - Crosby Engineered Products Group at 800-7771555. In CANADA - Crosby Canada (905) 451-9261. IN EUROPE - N.V. Crosby Europe 32-15-757125. As you read instructions, pay particular attention to safety information in bold print.

STATIC LOAD - The load resulting from a constantly applied force or load. WORKING LOAD LIMIT - The maximum mass or force which the product is authorized to support in general service when the pull is applied in-line, unless noted otherwise, with respect to the center line of the product. This term is used interchangeably with the following terms. 1. WLL 2. Rated Load Value 3. SWL 4. Safe Working Load 5. Resultant Safe Working Load

KEEP INSTRUCTIONS FOR FUTURE USE - DO NOT THROW AWAY!

332

WORKING LOAD - The maximum mass or force which the product is authorized to support in a particular service. PROOF LOAD - The average force applied in the performance of a proof test; the average force to which a product may be subjected before deformation occurs. PROOF TEST - A test applied to a product solely to determine non conforming material or manufacturing defects. Copyright © 2006 The Crosby Group, Inc. All Rights Reserved

TBM_code.fm Page 313 Saturday, February 4, 2006 8:43 AM

ULTIMATE LOAD - The average load or force at which the product fails, or no longer supports the load. SHOCK LOAD - A force that results from the rapid application of a force (such as impacting and/or jerking) or rapid movement of a static load. A shock load significantly adds to the static load. DESIGN (SAFETY) FACTOR - An industry term denoting a product's theoretical reserve capability; usually computed by dividing the catalog Ultimate Load by the Working Load Limit. Generally expressed for blocks as a ratio of 4 to 1. TACKLE BLOCK - An assembly consisting of a sheave(s), side plates, and generally an end fitting (hook, shackle, etc.) that is used for lifting, lowering, or applying tension. SHEAVE / SHEAVE BEARING ASSEMBLY - Purchased by O.E.M. or end user to be used in their block or lifting system design.

Fitting Maintenance Fittings, including hooks, overhaul balls, shackles, links, etc., may become worn and disfigured with use, corrosion, and abuse resulting in nicks, gouges, worn threads and bearings, sharp corners which may produce additional stress conditions and reduce system load capacity. Grinding is the recommended procedure to restore smooth surfaces. The maximum allowance for reduction of a product's original dimension due to wear or repair before removal from service is: 1. Any single direction - No more than 10% of original dimension. 2. Two directions - No more than 5% of each dimension. For detailed instructions on specific products, see the application and warning information for that product. Any greater reduction may necessitate a reduced Working Load Limit. Any crack or deformation in a fitting is sufficient cause to withdraw the product from service.

Selection Guide Some of the blocks shown in Crosby Group literature are named for their intended use and selection is routine. A few examples include the "Double Rig Trawl Block" used in the fishing industry, the "Well Loggers Block" used in the oil drilling industry, and the "Cargo Hoisting Block" used in the freighter boat industry and "Derrick and Tower Block" used for hoisting personnel. Others are more generally classified and have a variety of uses. They include snatch blocks, regular wood blocks, standard steel blocks, etc. For example, snatch blocks allow the line to be attached by opening up the block instead of threading the line through the block. This feature eliminates the use of rope guards and allows various line entrance and exit angles to change direction of the load. These angles determine the load on the block and/or the block fitting.(See "Loads on Blocks" on page 335.) Snatch blocks are intended for infrequent and intermittent use with slow line speeds. A tackle block sheave assembly is one element of a system used to lift, change direction or drag a load. There are other elements in the system including the prime mover (hoist, winch, hand), supporting structure, power available, etc. All of these elements can influence the type of tackle block or sheave required. When selecting a block or sheave for the system in your specific application, you should consider the Copyright ÂŠ 2006 The Crosby Group, Inc. All Rights Reserved

other elements as well as the features of the blocks and sheaves shown in Crosby Group literature. To select a tackle block or sheave to fit your requirements, consider the following points: 1. Are there regulations which could affect your choice of blocks or sheaves, such as federal or state OSHA, elevator safety, mine safety, maritime, insurance, etc.? 2. What is the weight of the load, including any dynamics of impacts that add to load value? You must know this to determine the minimum required Working Load Limit value of the block or load on sheave. 3. How many parts of line are required? This can be determined given the load to be lifted and the line pull you have available. As an alternative, you could calculate the line pull required with a given number of parts of line and a given load weight (See "How to Figure Line Parts," page 338.) 4. What is the size of line to be used? Multiply the available line pull by the desired safety factor for wire rope to determine the minimum catalog wire rope breaking strength; consult a wire rope catalog for the corresponding grade and diameter of wire rope to match. You should also consider fatigue factors that affect wire rope life. (See "Sheave Size & Wire Rope Strength"page 337.) 5. What is the speed of the line? This will help you determine the type of sheave bearing necessary. There are several choices of bearings suitable for different applications, including: Common (Plain) Bore for very slow line speeds and very infrequent use (high bearing friction). Self Lubricating Bronze Bushings for slow line speeds and infrequent use (moderate bearing friction). Bronze Bushing with pressure lubrication for slow line speeds and more frequent use at greater loads (moderate bearing friction). Anti-friction Bearings for faster line speeds and more frequent use at greater loads (minimum bearing friction). 6. What type of fitting is required for your application? The selection may depend on whether the block will be traveling or stationary. Your choices include single or multiple hooks with or without throat latches and shackles, which are the most secured load attachment. You should also decide whether the fitting should be fixed, swivel or swivel with lock. If it is a swivel fitting, then selection of a thrust bearing may be necessary. There are plain fittings with no bearings for positioning at no load, bronze bushed fittings for infrequent and moderate load swiveling, and anti-friction bearing equipped fittings for frequent load swiveling. 7. How will the block be reeved and does it require a dead end becket? (See "The Reeving of Tackle Blocks", page 336.) 8. If the block is to be a traveling block, what weight is required to overhaul the line? (See "How to Determine Overhaul Weights", page 338.) 9. Loss of material due to corrosion or wear on external area of welded hook and nut may indicate thread corrosion or damage. If these conditions exist, remove from service or perform load test. 333

TBM_code.fm Page 314 Saturday, February 4, 2006 8:43 AM

10. What is the fleet angle of the wire line? Line entrance and exit angles should be no more than 1-1/2 degree. 11. How will the block or sheave be maintained? Do conditions in your application require special maintenance considerations? (See "Tackle Block and Sheave Maintenance," page 334 and "Fitting Maintenance," page 333.) 12. Reference current edition of "Wire Rope Users Manual" for additional sheave design and maintenance information.

Tackle Block and Sheave Maintenance Tackle Blocks and Sheaves must be regularly inspected, lubricated, and maintained for peak efficiency and extended usefulness. Their proper use and maintenance is equal in importance to other mechanical equipment. The frequency of inspection and lubrication is dependent upon frequency and periods of use, environmental conditions, and the user's good judgment. Inspection: As a minimum, the following points should be considered: 1. Wear on pins or axles, rope grooves, side plates, bushing or bearings, and fittings (See Fitting Maintenance). Excessive wear may be a cause to replace parts or remove block or sheave from service. 2. Deformation in side plates, pins and axles, fitting attachment points, trunnions, etc. Deformation can be caused by abusive service and / or overload and may be a cause to remove block or sheave from service. 3. Misalignment or wobble in sheaves. 4. Security of nuts, bolts, and other locking methods, especially after reassembly following a tear down inspection. Original securing method should be used; e.g., staking, set screw, cotter pin, cap screw. 5. Pins retained by snap rings should be checked for missing or loose rings. 6. Sheave pin nuts should be checked for proper positioning. Pins for tapered roller bearings should be tightened to remove all end play during sheave rotation. Pins for bronze bushings and straight roller bearings should have a running clearance of .031 inch per sheave of end play and should be adjusted accordingly. 7. Hook or shackle to swivel case clearance is set at .031 to .062 at the factory. Increased clearance can result from component wear. Clearance exceeding .18 should necessitate disassembly and further inspection. 8. Deformation or corrosion of hook and nut threads. 9. Surface condition and deformation of hook. (See Fitting Maintenance and ANSI B30.10.) 10. Welded side plates for weld corrosion or weld cracking. 11. Hook latch for deformation, proper fit and operation. 12. Remove from service any bushings with cracks on inside diameter or bushing end. Bushings that are cracked and/or extended beyond sheave hub are indications of bushing overload. Lubrication: The frequency of lubrication depends upon frequency and period of product use as well as environmental conditions, which are contingent upon the user's good judgment. Assuming normal product use, the following 334

schedule is suggested when using lithium-base grease of a medium consistency. Sheave Bearings Tapered Roller Bearings - Every 40 hours of continuous operation or every 30 days of intermittent operation. Roller Bearings - Every 24 hours of continuous operation or every 14 days of intermittent operation. Bronze Bushings - (Not Self Lubricated) - Every 8 hours of continuous operation or every 14 days of intermittent operation. Self Lubricating Bronze Bushing - are for slow line speeds and infrequent use (moderate bearing friction). Frequent inspection is required to determine the condition of bushing. Hook Bearings Anti Friction - Every 14 days for frequent swiveling; every 45 days for infrequent swiveling. Bronze Thrust Bushing or No Bearing - Every 16 hours for frequent swiveling; every 21 days for infrequent swiveling. Tackle Block Maintenance also depends upon proper block selection (see "Loads on Blocks"), proper reeving (see "The Reeving of Tackle Blocks"), consideration of shock loads, side loading, and other adverse conditions.

Sheave Bearing Application Information Sheaves in a system of blocks rotate at different rates of speed, and have different loads. When raising and lowering, the line tension is not equal throughout the system. Refer to Page 318 "How to Figure Line Parts" for assistance in determining lead line loads used for bushing or bearing selection. BRONZE BUSHINGS Bronze Bushings are used primarily for sheave applications using slow line speed, moderate load, and moderate use. The performance capability of a bearing is related to the bearing pressure and the bearing surface velocity by a relationship known as true PV (Maximum Pressure - Velocity Factor). The material properties of the Bronze Bushings furnished as standard in Crosby catalog sheaves are: (BP) Maximum Bearing Pressure : 4500 PSI (BV) Maximum Velocity at Bearing :1200 FPM (PV) Maximum Pressure Velocity Factor: 55000 (It should be noted that due to material property relations, the maximum BP times the maximum BV is NOT equal to the maximum PV.) Formula for Calculating Bearing Pressure: Line Pull x Angle Factor BP =

Shaft Size x Hub Width

Note: Angle Factor Multipliers listed on page 335. Formula for Calculating Bearing Velocity: PV BV =

TBM_code.fm Page 315 Saturday, February 4, 2006 8:43 AM

Formula for Calculating Line Speed: BV (Tread Diameter + Rope Diameter) Line Speed =

Shaft Diameter

Calculations can be made to find the maximum allowable line speed for a given total sheave load. If the required line speed is greater than the maximum allowable line speed calculated, then increase the shaft size and/or the hub width and recalculate. Continue the process until the maximum allowable line speed is equal to or exceeds the required line speed. Example Using a 14 in. sheave (Stock # 917191; refer to wire rope sheave section of General Catalog for dimensions) with a 4,600 lbs. line pull and an 80° angle between lines determine maximum allowable line speed. BP = (4,600 lbs. x 1.53) ÷ (1.50 x 1.62) = 2,896 PSI (line pull) (angle factor) (Hub Width) (Shaft Size) BV = 55,000 ÷ 2,896 = 19 FPM Allowable (PV Factor) (BP) Line Speed = 19 x (12 + .75) ÷ 1.50 = 161.5 FPM ALLOWABLE (BV) (Tread Dia. + Rope Size) ÷ (Shaft Dia.) If the application required a line speed equal to 200 FPM, then another calculation would be necessary. Trying another 14 in. sheave (stock # 4104828) under the same loading conditions, the results are as follows:

A single sheave block used to change load line direction can be subjected to total loads greatly different from the weight being lifted or pulled. The total load value varies with the angle between the incoming and departing lines to the block. The following chart indicates the factor to be multiplied by the line pull to obtain the total load on the block.

Angle 0° 10° 20° 30° 40° 45° 50° 60° 70° 80° 90°

Angle Factor Multipliers Factor Angle 2.00 100° 1.99 110° 1.97 120° 1.93 130° 1.87 135° 1.84 140° 1.81 150° 1.73 160° 1.64 170° 1.53 180° 1.41 —

Factor 1.29 1.15 1.00 .84 .76 .68 .52 .35 .17 .00 —

Example A (Calculations for determining total load value on single line system.) A gin pole truck lifting 1,000 lbs.

BP = (4,600 lbs. x 1.53) / (2.75 x 2.31) = 1,108 PSI BV = 55,000 / 1,108 = 50 FPM Line Speed = 50 x (12.25 + .75) / 2.75 = 236 FPM ALLOWABLE COMMON (PLAIN) BORE Very slow line speed, very infrequent use, low load. ROLLER BEARING Faster line speeds, more frequent use, greater load. Refer to manufacturer's rating. Reference appropriate bearing manufacturer's catalog for proper bearing selection procedure.

Loads on Blocks The Working Load Limit (WLL) for Crosby Group blocks indicates the maximum load that should be exerted on the block and its connecting fitting. This total load value may be different from the weight being lifted or pulled by a hoisting or hauling system. It is necessary to determine the total load being imposed on each block in the system to properly determine the rated capacity block to be used.

There is no mechanical advantage to a single part load line system, so winch line pull is equal to 1,000 lbs. or the weight being lifted. To determine total load on snatch block A: A = 1,000 lbs. x 1.81 = 1,810 lbs. (line pull)(factor 50° angle) To determine total load on toggle block B: B = 1,000 lbs. x .76 = 760 lbs. (line pull) (factor 135° angle)

335

Example B (Calculation for determining total load value for mechanical advantage system.) Hoisting system lifting 1,000 kg using a traveling block. The mechanical advantage of traveling block C is 2.00 because two (2) parts of load line support the 1,000 kg weight. (Note that this example is simplified for determination of resultant load on blocks. Lead line pull will be greater than shown due to efficiency losses.) (To determine single line pull for various bearing efficiency see "How to Figure Line Parts" page 338.) To Determine Line Pull: Line Pull = 1,000 kg. ÷ 2.00 = 500 kg.

The Reeving of Tackle Blocks In reeving of tackle blocks, there are many methods. The method discussed below is referred to as "Right Angle" reeving. Please consult your rigging manual for other methods of reeving. RIGHT ANGLE REEVING In reeving a pair of tackle blocks, one of which has more than two sheaves, the hoisting rope should lead from one of the center sheaves of the upper block to prevent toppling and avoid injury to the rope. The two blocks should be placed so that the sheaves in the upper block are at right angles to those in the lower one, as shown in the following illustrations. Start reeving with the becket or dead end of the rope. Use a shackle block as the upper one of a pair and a hook block as the lower one as seen below. Sheaves in a set of blocks revolve at different rates of speed. Those nearest the lead line revolve at the highest rate of speed and wear out more rapidly. All sheaves should be kept well lubricated when in operation to reduce friction and wear.

Reeving Diagram

To determine total load on traveling block C: C = 500 kg. x 2.0 = 1,000 kg. (line pull)(Factor 0° angle) To determine total load on stationary block D: D = 500 kg. x 1.87 + 500 kg. = 1,435 kg. (line pull) (dead-end load) (Factor 40° angle) To determine total load on block E: E = 500 kg. x .84 = 420 kg. (line pull) (Factor 130° angle) To determine total load on block F: F = 500 kg. x 1.41 = 705 kg. (line pull) (Factor 90° angle)

336

CAUTION • Exercise care when block is standing in vertical position, as the potential for tipping exists. Potential causes of tipping are unstable work area, boom movement and the reeving process. • If work area is unstable, lay block flat on side plate.

TBM_code.fm Page 317 Saturday, February 4, 2006 8:43 AM

Sheave Size & Wire Rope Strength Strength Efficiency Bending wire rope reduces its strength. To account for the effect of bend radius on wire rope strength when selecting a sheave, use the table below:

Ratio A 40 30 20 15 10 8 6 4 2 1

Strength Efficiency Compared to Catalog Strength in % 95 93 91 89 86 83 79 75 65 50

Fatigue Life Repeated bending and straightening of wire rope causes a cyclic change of stress called "fatiguing." Bend radius affects wire rope fatigue life. A comparison of the relative effect of sheave diameter on wire rope fatigue life can be determined as shown below: Relative Fatigue Bending Life 10.0 6.6 3.8 2.9 2.1 1.5 1.1

Ratio B 30 25 20 18 16 14 12

Ratio B =

Sheave Diameter Rope Diameter

Relative Fatigue Bending Life Sheave #1 Relative Fatigue Bending Life (Sheave #2)

Relative Fatigue = Bending Life Ratio A =

Sheave Diameter Rope Diameter

Example To determine the strength efficiency of 1/2" diameter wire rope using a 10" diameter sheave: Ratio A =

10" (sheave diameter) ½" (wire rope diameter)

Refer to ratio A of 20 in the table then check the column under the heading "Strength Efficiency Compared to Catalog Strength in %"...91% strength efficiency as compared to the catalog strength of wire rope.

Example To determine the extension of fatigue life for a 3/4" wire rope using a 22.5" diameter sheave versus a 12" diameter sheave:

Ratio B =

22.5" (sheave diameter) 3/4” (wire rope diameter)

= 30

Ratio B =

12 (sheave diameter) 3/4” (wire rope diameter)

= 16

The relative fatigue bending life for a ratio B of 16 is 2.1 (see above Table) and ratio B of 30 is 10. Relative Fatigue Bending Life

10 2.1

= 4.7

Therefore, we expect extension of fatigue life using a 22.5" diameter sheave to be 4.7 times greater than that of a 12" diameter sheave.

337

M_TBM_warn.fm Page 318 Sunday, March 26, 2006 1:14 PM

How to Determine Overhauling Weights To determine the weight of the block or overhaul ball that is required to free fall the block, the following information is needed: size of wire rope, number of line parts, type of sheave bearing, length of crane boom, and drum friction (use 25 kg, unless other information is available).

Wire Rope Size (mm) 10 11 13 14 16 19 22 25 28 32

Number of Line Parts 1 2 3 4 5 6 7 8 9 10

Factor A - Wire Rope Weight kg /m, 6 x 19 IWRC .39 .52 .68 .88 1.07 1.55 2.11 2.75 3.48 4.30

Factor B - Overhaul Factors Roller Bearing Bronze Bushed Sheaves Sheaves 1.03 1.05 2.07 2.15 3.15 3.28 4.25 4.48 5.38 5.72 6.54 7.03 7.73 8.39 8.94 9.80 10.20 11.30 11.50 12.80

The Formula is: Required Block Weight = [(Boom Length x Factor A) + Drum Friction] x Factor B Example: To determine the required block or overhaul weight using 5 parts of 22 mm diameter wire rope, a 15 m boom and roller bearing sheaves: Required Block = [(15 m x 2.11)+ 25 kg] x 5.38 = 305kg Weight (Boom length) (Drum Friction) (Factor A) (Factor B)

338

How to Figure Line Parts Sheaves in a system of blocks rotate at different rates of speed, and have different loads. When raising and lowering, the line tension is not equal throughout the system. To help figure the number of parts of line to be used for a given load, or the line pull required for a given load, (for example, use Reeving Diagram on page 336. Only numbered lines shall be used in the calculation). The following ratio table is provided with examples of how to use it. The ratios are applicable for blocks as shown on page 336 and also independent sheave systems that line is reeved through.

Ratio A Bronze Bushed Sheaves .96 1.87 2.75 3.59 4.39 5.16 5.90 6.60 7.27 7.91 8.52 9.11 9.68 10.20 10.70 11.20 11.70 12.20 12.60 13.00

Ratio A or B =

Ratio B Anti-Friction Bearing Sheaves .98 1.94 2.88 3.81 4.71 5.60 6.47 7.32 8.16 8.98 9.79 10.60 11.40 12.10 12.90 13.60 14.30 15.00 15.70 16.40

Number of Line Parts 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Total Load to be Lifted Single Line Pull (lbs.)

After calculating Ratio A or B, consult table to determine number of parts of line. Examples: To find the number of parts of line needed when weight of load and single line pull are known, and using Bronze Bushed Sheaves. Ratio A =

72 t (load to be lifted) 8 t (single line pull)

=9 (Ratio A)

In table above refer to ratio 9 or next highest number, then check column under heading “Number of Line Parts” = 12 parts of line to be used for this load. To find the single line pull needed when weight of load and number of parts of line are known, and using Anti-Friction Bearing Sheaves. Single Line Pull= 68 t (load to be lifted) = 9.29 t 7.32 (Ratio B of 8 part line) 9.29 t single line pull required to lift this load on 8 parts of line. Copyright © 2006 The Crosby Group, Inc. All Rights Reserved

M_TBM_warn.fm Page 319 Sunday, March 26, 2006 1:15 PM

To find the lift capacity when the parts of line and single line pull are known, and using anti-friction bearing sheaves.

How to Find Your Nearest Crosby Distributor

10 t (Single line pull) x 4.71 (Ratio B of 5 parts of line) = 47.1 t (Lift Capacity)

To locate your nearest Crosby Distributor, call:

10 t single line pull with 5 parts of line will accommodate 47.1 t lift capacity.

IN U.S.A. - Crosby Customer Service Department at (800) 772-1500 IN CANADA - Crosby Canada at (905) 451-9261 IN EUROPE - N.V. Crosby Europe at 32 15 757125

Repairs For repair of blocks, contact the following numbers for return material authorization. IN U.S.A. - Crosby Engineered Products Group at (800) 777-1555 IN CANADA - Crosby Canada at (905)451-9261 IN EUROPE - N.V. Crosby Europe at 32 15 757125 Your block, after receipt by Crosby, will be inspected and a free estimate of repair charges will be provided. Authorization for repairs from block owners must be given to Crosby before repairs are made. Transportation charges, both to and from factory, are to be paid by the block owner.

Additional Information For information concerning parts, special application, or situations requiring other features, contact: U.S.A. The Crosby Group, Inc. P.O. Box 3128 Tulsa, OK 74101-3128 (918) 834-4611 FAX (918) 832-0940 www.thecrosbygroup.com crosbygroup@thecrosbygroup.com CANADA Crosby Canada 145 Heart Lake Road Brampton, Ontario, Canada L6W 3K3 (905) 451-9261 FAX (877)260-5106 www.crosby.ca sales@crosby.ca EUROPE N.V. Crosby Europe Leuvensebaan 51 2580 Putte (Mechelen) Belgium 32-15-75-71-25 FAX 32-15-75-37-64 www.thecrosbygroup.com sales@crosbyeu.com

339

Pull_test.fm Page 25 Sunday, February 5, 2006 3:50 PM

McKissick® Pull Test Capabilities

Two 24”, 5 sheave blocks being tested in McKissick’s pull test facility. • • • • • •

Proof Test Capability (Blocks) - 1000 short tons Ultimate Test Capability - 800 short tons Proof Test Capability (Shackles) - 2000 metric tonnes Full reeving block testing by using winches to 1000 short tons Complete laboratory facilities for all phases of metalurgical testing and inspection. Certifications available for all national standards, American Bureau of Shipping, Lloyd’s Register of Shipping, Det Norske Veritas, etc.

340