Perfomax® – Indexable inserts Peripheral insert, wiper geometry* for, SD502, SD503, SD504, SD505, SD542 Dimensions in mm
Tolerances: l = ±0,025 s = ±0,13 m = ±0,025
l
s
r
m
5,556 6,35 7,937 9,525 12,7 15,875
2,38 2,38 3,18 3,97 4,76 5,56
0,4 0,4 0,8 0,8 0,8 1,2
0,987 1,151 1,315 1,644 2,302 2,795
Size 05 06 07 09 12 15
T3000D
T2000D
DP2000
T1000D
Part No.
T400D
Inserts
T250D
Grades
SCGX-P2 [ [ [ [ [ [
SCGX 050204W-P2 060204W-P2 070308W-P2 09T308W-P2 120408W-P2 150512W-P2
* Geometry for high feed rate with good surface finish maintained.
Centre insert, type C1 for, SD502, SD503, SD504, SD505, SD542 Dimensions in mm
Tolerances: l = ±0,025 s = ±0,13
Size 05 06 07 09 11 12 15 19
l
s
5,556 6,35 7,937 9,525 11,509 12,7 15,875 19,05
2,38 2,38 3,18 3,18 3,97 3,97 4,76 4,76
SPGX-C1 SPGX 0502-C1 0602-C1 0703-C1 0903-C1 11T3-C1 12T3-C1 1504-C1 1904-C1
[ Stock standard Subject to change refer to current price and stock-list 202
[ [ [ [ [ [ [ [
T3000D
T2000D
DP2000
T1000D
Part No.
T400D
Inserts
T250D
Grades
T3000D is recommended when maximum wear resistance is needed on the centre insert. It [ [ is preferably used together with the T1000D at high cutting speeds. [ [ [ [ [ [