Gas Welding, Brazing and Soldering
8 Fluxes
SB Flux Easyflo Preferred general purpose flux, suitable for most engineering materials. Also suitable for use with all ProSilver alloys. Residue soluble in hot water or 10% caustic soda. N
Temperature range 550–880°C
Size
Part No.
250g
Efloflux
GP SB Flux Tenacity 4A For higher melting point applications and longer heating cycles. Suitable for use with all ProSilver alloys. Preferred for ProSilver 2.5 and 15 if heating cycle is long. N
Temperature range 600–850°C
Size
Part No.
250g
Ten4AFlux
Flux Tenacity 20 For copper, brass gas welding and steel brazing. Suitable for higher temperatures and extended cycle times. Suitable for ProFill bronze alloy range. Use as a powder or mix with water for a paste. N
Temperature range 750–1000°C
Size
Part No.
250g
Ten20Flux
WARNING Welding can give rise to electric shock, excessive noise, eye and skin burns due to the arc rays, and a potential health hazard if you breathe in the emitted fumes and gases. Read all the manufacturer’s instructions to achieve the correct welding conditions and ask your employer for the Materials Safety Data Sheets. Refer to www.boc.com.au or www.boc.co.nz
NZ : IPRM 2007 : SECTION 8 : CONSUMABLES
393