CONSUMER PRODUCTS SERVICES DIVISION
TOYS ''R'' US, INC. Technical Report:
(5212)053-0553
Date Received:
February 28, 2012
Name:
Address:
Contact Person: Email: Phone: Fax:
Vendor: HEXXA (HK) CO LTD
March 09, 2012 Page 1 of 13
Agent:
ROOM D, 26/F, FORD GLORY PLAZA, 37-39 WING HONG ST. CHEUNG SHA WAN, KLN, H.K. JAMES KWOK
Factory/Sampling Location: GOLDROSITA INTELLIGENT ELECTRONIC TOYS INDUSTRIAL CO., LTD. OPPOSITE THE GUANGHUA INDUSTRIAL PARK ,CHENGJIAN ROAD, CHENGHAI, SHANTOU, GUANGDONG, CHINA CAROL WANG
JAMES@ROLLEN7.COM 852 3583 1812 852 3583 1820
CAROL_TOYS@YAHOO.COM.CN 86-15994900849 86-754-85837808
RESULT: PASS SAMPLE DESCRIPTION:
Category:
MINI BUGGY 1. ) RED 2. ) GREEN 3. ) BLUE 4. ) YELLOW PRIVATE LABEL
Program:
Brand Name:
FAST LANE
Protocol #(s) Applied:
TRUI Office Location: UNITED STATES Season: FALL Country of Origin: CHINA Material Type: PLASTIC Colors/Prints: N/A Product Claims: NO Brand of Snaps/Zippers: NO SNAPS/ZIPPERS Shipment Type: DIRECT IMPORT Changes to Prod/Pkg Since Previous Submission: Countries of Distribution: Resource / PO Name: Department/Category #: Subcategory/Class #: Style/Mfr #:
Sample Size: Batch/Date Code on Prod: Batch/Date Code on Pkg: Labeled Age Grade: Appropriate Age Grade: Tested Age Grade: Failure Type: Retest Approver name: N/A
US HEXXA HK CO LTD YTN 9101 N/A 5F5E5D6
Evaluation Type: Pre-Assessment/Design Evaluation Report #: Previous COC Report #: Material/Component/Piece Goods Evaluation Report #: Prototype Report #: Transit Report #: If Retest, Previous Failed Report #: If Transfer Result, Full Test or Data Report #: Service Required: PD Manager:
Bureau Veritas Hong Kong Limited Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon, Hong Kong Tel: (852) 2331 0888 Fax: (852) 2331 0889 www.bureauveritas.com/cps
Item #: Bundle #: UPC #:
TOYS/HARDLINES/ JUVENILE TRUI-8000-US, BRUS-8444-US 48 09152011 09152011 6+ OVER 6 YEARS OF AGE OVER 6 YEARS OF AGE NOT APPLICABLE N/A
684757 N/A 844940000412
FINAL PRODUCT (FULL COC) N/A / N/A N/A N/A N/A N/A REGULAR N/A
This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/cps and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 2 of 13
Multi-Country Testing: Japan Report #:
52120530564
TEST: • 16 CFR 1500.44 Flammability (solids) • ASTM F963-08 Mechanical hazards – Toys ** • CPSIA Total lead content in substrate(100ppm)comp • CPSIA Tracking labels • Client's DNOP/DINP/DIDP content • Packaging and labeling evaluation • TRU Soluble heavy metals content in substrate
• • •
ASTM F963-08 Labeling - Toys ASTM F963-08 Soluble heavy metals content ** CPSIA Total lead content in surface coating **
• • • •
Client's BBP/DBP/DEHP content Illinois Lead content in surface coating (40ppm) TRU FCC Labeling TRU Total lead content in non-clothing PVC
The sample(s) MEET the following requirement(s):
-
The flammability requirements of 16 CFR 1500.3(c)(6)(vi), "Flammable solid" (FHSA regulations).
-
The labeling requirements of ASTM F963-08, “Standard consumer safety specification for toy safety”.
-
The mechanical hazards requirements of ASTM F963-08, “Standard consumer safety specification for toy safety”.**
-
The soluble heavy metals content requirements of ASTM F963-08, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2. **
-
The total lead content of 100ppm requirements by composite testing in substrate materials (Consumer Products Safety Improvement Act (CPSIA) of 2008).
-
The total lead content of 90ppm requirements of 16 CFR 1303, “Ban of lead-containing paint and certain consumer products bearing lead-containing paint” as mandated by Congress in section 101(f) of the Consumer Products Safety Improvement Act (CPSIA) of 2008, Public Law 110-314. **
-
The tracking label requirement of the Consumer Product Safety Improvement Act (CPSIA) of 2008 section 103 Tracking Labels for Children's Products.
-
The BBP, DBP and DEHP content requirements of the client’s specifications.
-
The DNOP, DINP and DIDP content requirements of the client’s specifications.
-
The total lead content of surface coating requirements of Illinois Lead Poisoning Prevention Act, Public Act 0951019, in client’s specification (40ppm).
-
The packaging and labeling requirements of the client’s testing program.
-
The labeling requirements of 47 CFR Part 15 as per client’s request.
-
The soluble heavy metals content of substrate materials requirement in client’s specification.
-
The total lead content of non-clothing PVC requirements in client’s specification.
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 3 of 13
Note:
The sample(s) was not evaluated to the Normal Use testing requirements specified in ASTM F963-08, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime.
Note:
No street address for the manufacturer, packer or distributor was provided. Street address is required per UPLR, unless it can be found in a local city or telephone directory. The presence of the street address in a local directory has not been verified.
Note:
The received sample(s) contained scrapable surface coating material(s) of less than 10 milligrams by weight on one single sample, therefore such coating material(s) was not subject to the soluble heavy metals analysis of ASTM F963-08, “Standard consumer safety specification on toy safety�, Section 4.3.5.2, as specified in Section 8.3.3.1(2).
Explanation of Why Item is Not Labeled w/ Tracking:
NOT APPLICABLE
BUREAU VERITAS HONG KONG LIMITED
Lai Ka Ming, Kent Director Toys and Juvenile Products Department KL/ag/sl **This third party report was issued to certify the tested product(s) complied with this rule, ban, standard, or regulation.
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 4 of 13
RESULTS: FLAMMABILITY (16 CFR SECTION 1500.3(c)6)(vi)) Requirement Burn rate no greater than 0.1 of an inch per second
Test Method Reference 16 CFR 1500.44
Findings Most rapid burn rate less than 0.1 of an inch per second.
TOTAL LEAD CONTENT IN SURFACE COATING (''Ban of Lead-containing paint and certain consumer products bearing Lead-containing paint'', Consumer Product Safety Improvement Act (CPSIA) of 2008) Analyte Requirement: Maximum allowable limit:
Lead 90 mg/kg
Analyte Style 1
Lead (Pb) Result (mg/kg) LT 10
(A)
Sample Description Color / Component Location lacquer / red coating car body
Conclusion Pass
(B)
lacquer / white coating / red underlying
car body
1, 3
LT 10
Pass
(C)
lacquer / black coating / red underlying
car body
1, 2, 4
LT 10
Pass
(D)
lacquer / light green coating
car body
1, 2
LT 10
Pass
(E)
lacquer / light blue coating
car body
3
LT 10
Pass
(F)
lacquer / deep grey coating / white underlying
window
2, 3
LT 10
Pass
car body
4
(G)
lacquer / yellow coating
car body
4
LT 10
Pass
(H)
lacquer / silver coating / yellow underlying
car body
4
10
Pass
(I)
lacquer / green coating
car body
2
LT 10
Pass
(J)
shiny silver coating
wheels, lights and pipe
1-4
LT 10
Pass
LT = Less Than * = Average of duplicate analyses
words on remote
1-4
mg/kg = milligrams per kilogram (ppm=parts per million)
Remark: In some cases, the tested component cannot be tested individually due to overlapped coatings.
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 5 of 13
RESULTS: TOTAL LEAD CONTENT IN SURFACE COATING (Illinois General Assembly, Public Act 095-1019) Test Method:
Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
Analyte Requirement: Maximum allowable limit:
Lead 40 mg/kg
Analyte Style 1
Lead (Pb) Result (mg/kg) LT 10
Sample Description Color / Component Location (A) lacquer / red coating car body
Conclusion Pass
(B) lacquer / white coating / red underlying
car body
1, 3
LT 10
Pass
(C) lacquer / black coating / red underlying
car body
1, 2, 4
LT 10
Pass
(D) lacquer / light green coating
car body
1, 2
LT 10
Pass
(E) lacquer / light blue coating
car body
3
LT 10
Pass
(F) lacquer / deep grey coating / white underlying
window
2, 3
LT 10
Pass
car body
4
(G) lacquer / yellow coating
car body
4
LT 10
Pass
(H) lacquer / silver coating / yellow underlying
car body
4
10
Pass
(I)
lacquer / green coating
car body
2
LT 10
Pass
(J)
shiny silver coating
wheels, lights and pipe
1-4
LT 10
Pass
LT = Less Than * = Average of duplicate analyses
words on remote
1-4
mg/kg = milligrams per kilogram (ppm = parts per million)
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 6 of 13
RESULTS: TOTAL LEAD CONTENT IN SUBSTRATE BY COMPOSITE TESTING (100PPM) (Consumer Product Safety Improvement Act (CPSIA) of 2008) Analyte Requirement: Maximum allowable limit:
Lead 100 mg/kg
Analyte Style 1-4
Lead (Pb) Result (mg/kg) 12
Sample Description Color / Component Location (A) golden metal end of antenna
Conclusion
(B) silvery metal
tip of antenna
1-4
17
Pass Pass
(C) bright silvery metal
antenna
1-4
14
Pass
(D) dull silvery metal
antenna
1-4
14
Pass
(E) off silvery metal
antenna of car
1-4
37
Pass
(F) matt silvery metal
screws of car
1-4
12
Pass
(G) soft silvery metal
screws with ring of car
1-4
11
Pass
(H) deep soft silvery metal
spring of car
1-4
10
Pass
(I)
dark soft silvery metal
screw of battery cover of car
1-4
LT 10
Pass
(J)
black / white PVC
wire of plug of remote
1-4
LT 10
Pass
(K) dull black PVC
plug of remote
1-4
LT 10
Pass
(L) off black PVC
wire of car
1-3
LT 10
Pass
(M) black printed red PVC
wire of car
1-4
LT 10
Pass
(N) blue PVC
wire of car
4
LT 10
Pass
(O) clear red plastic
remote
1-4
LT 10
Pass
translucent green plastic
LED of remote
1-4
translucent red plastic
LED of remote
1-4
sticker on remote and
1-4
LT 10
Pass
27
Pass
LT 10
Pass
(P) clear laminated multi-color printed white paper sticker
car
black plastic
remote and car
1-4
matt black plastic
switch on remote and chassis
1-4
tires
1-4
car body
1-4
lights
1-4
car body
1-4
red plastic
tip of antenna
1-4
translucent white plastic
joint of wheels and alignment on chassis
1-4
(Q) black soft plastic clear laminated multi-color printed clear plastic sticker clear plastic (R) white plastic
LT = Less Than * = Average of duplicate analyses
mg/kg = milligrams per kilogram (ppm = parts per million)
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 7 of 13
RESULTS: SOLUBLE HEAVY METALS CONTENT (ASTM F963-08, Section 4.3.5.2) Test Method:
Soluble heavy metals content analysis was determined by Inductively Coupled Plasma Spectrometry.
Sample Identity
Color
Location
Style
A.
lacquer / red coating
car body
1
B.
lacquer / white coating / red underlying
car body
1, 3
C.
lacquer / black coating / red underlying
car body
1, 2, 4
D.
lacquer / light green coating
car body
1, 2
E.
lacquer / light blue coating
car body
3
F.
lacquer / deep grey coating / white underlying
window
2, 3
car body
4
G.
lacquer / yellow coating
car body
4
H.
lacquer / green coating
car body
2
I.
shiny silver coating
wheels, lights and pipe
Analyte Maximum Limit (mg/kg) Analytical Correction
Analyte
1-4
As
Ba
Cd
Cr
Hg
Pb
Sb
Se
25
1000
75
60
60
90
60
500
60%
30%
30%
30%
50%
30%
60%
60%
As
Ba
Cd
A.
LT 2
LT 2
LT 2
LT 2
B.
LT 2
LT 2
LT 2
C.
LT 2
LT 2
D.
LT 2
E.
Hg
Conclusion
Pb
Sb
Se
LT 2
LT 2
LT 2
LT 2
0.0143
Pass
LT 2
LT 2
LT 2
LT 2
LT 2
0.0111
Pass
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0102
Pass
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0169
Pass
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0203
Pass
F.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0130
Pass
G.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0255
Pass
H.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0185
Pass
I.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0126
Pass
Sample
Cr
Mass of Trace Amount (g)
Result (mg/kg)
LT = Less Than CR = adjusted analytical result mg/kg = milligrams per kilogram (ppm=parts per million) * = Average of duplicate analysis
As = Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 8 of 13
RESULTS: CLIENT’S SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE Sample Color / Component Identity Type II: Polymeric Materials
Location
Style
A.
black / white PVC
wire of plug of remote
1-4
B.
dull black PVC
plug of remote
1-4
C.
off black PVC
wire of car
1-3
D.
black printed red PVC
wire of car
1-4
E.
blue PVC
wire of car
4
F.
clear red plastic
remote
1-4
G.
translucent green plastic
LED of remote
1-4
H.
translucent red plastic
LED of remote
1-4
I.
clear laminated multi-color printed white paper sticker
sticker on remote and car
1-4
J.
black plastic
remote and car
1-4
K.
matt black plastic
switch on remote and chassis
1-4
L.
off black plastic
tip of plug of remote
1-4
M.
black soft plastic
tires
1-4
N.
clear laminated multi-color printed clear plastic sticker
car body
1-4
O.
clear plastic
lights
1-4
P.
white plastic
car body
1-4
Q.
red plastic
tip of antenna
1-4
R.
translucent white plastic
joint of wheels and alignment on chassis
1-4
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 9 of 13
RESULTS: CLIENT’S SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE Analyte Max. Limit All except Type VIII (mg/kg) Max. Limit Type VIII (mg/kg) Analytical Correction
As
Ba
Cd
Cr
Hg
Pb
Sb
Se
25
1000
75
60
60
90
60
500
25
250
50
25
25
90
60
500
60%
30%
30%
30%
50%
30%
60%
60%
As
Ba
Cd
Cr
Hg
Pb
Sb
Se
Analyte Sample
Result (mg/kg)
Mass of Trace Amount (g)
Conclusion
A.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
B.
LT 2
LT 2
LT 2
LT 2
LT 2
2
LT 2
LT 2
Pass
C.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0218
Pass
D.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0252
Pass
E.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0172
Pass
F.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
G.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0402
Pass
H.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
0.0413
Pass
I.
LT 2
6
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
J.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
K.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
L.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
M.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
N.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
O.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
P.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
Q.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
R.
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
LT 2
Pass
LT = Less Than CR = adjusted analytical result mg/kg = milligrams per kilogram (ppm=parts per million) * = Average of duplicate analysis
Pass
0.0216
Pass
As = Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 10 of 13
RESULTS: CLIENT’S TOTAL LEAD CONTENT IN NON-CLOTHING PVC Test Method:
EPA 3051 Microwave digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
Analyte Requirement: Maximum allowable limit:
Lead 100 mg/kg
Analyte Style 1-4
Lead (Pb) Result (mg/kg) LT 10
Pass
(A)
Sample Description Color / Component Location black / white PVC wire of plug of remote
Conclusion Pass
(B)
dull black PVC
plug of remote
1-4
LT 10
(C)
off black PVC
wire of car
1-3
LT 10
Pass
(D)
black printed red PVC
wire of car
1-4
LT 10
Pass
(E)
blue PVC
wire of car
4
LT 10
Pass
LT = Less Than * = Average of duplicate analyses
mg/kg = milligrams per kilogram (ppm=parts per million)
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 11 of 13
RESULTS: CLIENT’S BBP/DBP/DEHP PHTHALATES CONTENT REQUIREMENTS Color / Component
Location
Style
Composite of A.
lacquer / red coating
B.
C.
car body
1
lacquer / white coating / red underlying
car body
1, 3
lacquer / black coating / red underlying
car body
1, 2, 4
lacquer / light green coating
car body
1, 2
lacquer / light blue coating
car body
3
lacquer / deep grey coating / white underlying
window
2, 3
car body
4
lacquer / yellow coating
car body
4
lacquer / silver coating / yellow underlying
car body
4
lacquer / green coating
car body
shiny silver coating
wheels, lights and pipe
1-4
black / white PVC
wire of plug of remote
1-4
dull black PVC
plug of remote
1-4
off black PVC
wire of car
1-3
black printed red PVC
wire of car
1-4
blue PVC
wire of car
4
off black plastic
tip of plug of remote
1-4
black soft plastic
tires
1-4
words on remote D. E. F.
G.
1-4 2
Test Parameter: Limit (%):
BBP 0.1
DBP 0.1
DEHP 0.1
Sample A. B. C. D. E. F. G.
LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005
Result (%) LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 0.01 LT 0.005
LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 0.02 LT 0.005
Detection Limit : BBP = Butyl benzyl phthalate (0.005%) DBP = Dibutyl phthalate (0.005%) DEHP = Di(2-ethylhexyl) phthalate (0.005%)
Results reported in percentage LT = Less than ND = None detected
Conclusion Pass Pass Pass Pass Pass Pass Pass
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 12 of 13
RESULTS: CLIENT’S DNOP/DINP/DIDP PHTHALATES CONTENT REQUIREMENTS Color / Component
Location
Style
Composite of A.
B.
C.
lacquer / red coating
car body
1
lacquer / white coating / red underlying
car body
1, 3
lacquer / black coating / red underlying
car body
1, 2, 4
lacquer / light green coating
car body
1, 2
lacquer / light blue coating
car body
3
lacquer / deep grey coating / white underlying
window
2, 3
car body
4
lacquer / yellow coating
car body
4
lacquer / silver coating / yellow underlying
car body
4
lacquer / green coating
car body
shiny silver coating
wheels, lights and pipe
1-4
black / white PVC
wire of plug of remote
1-4
dull black PVC
plug of remote
1-4
off black plastic
tip of plug of remote
1-4
black soft plastic
tires
1-4
words on remote D. E. F.
1-4 2
Test Parameter: Limit (%):
DNOP 0.1
DINP 0.1
DIDP 0.1
Sample A. B. C. D. E. F.
LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005
Result (%) LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005
LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005 LT 0.005
Detection Limit : DNOP = Di-n-octyl phthalate (0.005%) DINP = Di-iso-nonyl phthalate (0.005%) DIDP = Di-iso-decyl phthalate (0.005%)
Results reported in percentage LT = Less than ND = None detected
Conclusion Pass Pass Pass Pass Pass Pass
TOYS ''R'' US, INC. Technical Report: (5212)053-0553 March 09, 2012 Page 13 of 13
RESULTS: