Available NATIONWIDE Hire Desk: 0870 240 2381
TPA Product Profile
This lightweight foam Cross Tracking System has been designed to enable small plant and equipment to cross the rail quickly and safely. An example installation video overview can be viewed at;
Rapid Rail Access
www.tpa-rrap.com
Network Rail Approved, Lightweight Foam Cross Tracking System, for small plant. TPA is firmly established in the rail sector as “the” principle provider of safe, effective, value for money temporary roadways, walkways & access systems. The lightweight foam Cross Tracking System is a further new addition to TPA’s range of portable access equipment. With its customary rapid installation time, this new Cross Track System shall provide a superb all round solution for small plant.
The Benefits The crossing or access point is made from 480mm long foam sections, each of which weighs under 6kg so they can be easily hand-carried into position. Only simple site preperation is required and the system provides the following benefits; 1. Lightweight each section weighs under 6kg 2. Available in 480mm kits 3. Approved for use up to 10 tons per axle 4. Network Rail Approval Number PA57/055152 5. Simple site preparation 6. Easily transported to and from the access point The Process The lightweight foam Cross Track System allows operators of small plant to cross the track safely.
Lightweight Foam RRAP
TPA Rapid Rail Access System
LW Foam Track Crossing Point Dimensions ••Available in 480mm kits. ••600mm Depth from rail.
Innovative Solution The purpose of the Foam Rail Ramps is to provide an easy Cross Tracking System for small plant having axle loads up to 10 tonnes.
Weight ••Lightweight - each section weighs under 6kg. System Parts ••Each 480mm wide ramp kit consists of 2 outer ramp sections and 3 4ft infill sections.
Protective The ramps are suited for use on flat bottom plain line with a sleeper spacing of 650mm (28 per 60ft rail).
Load Bearing Capacity ••Approved for use up to 10 tonnes per axle. ••Maximum 20 tonnes gross weight. Installation Time ••Full ramp kit, inclusive of five full track access point (bridge) sections can be fully installed and ready for use in less than 10 minutes. ••Easily transported to and from the access point.
Quick Handling
Note ••The Lightweight Foam Cross Tracking System is not approved to be used on the Bull Head Track style of rail line, due to the clearance and “chairs” in which the rail sits.
© 2017 TPA Portable Roadways Limited All Rights reserved Specifications are subject to change without notice Trademarks are the property of TPA or their respective owners.
W:
www.tpa-rrap.com
T:
0870 240 2381
Each section is under 6kgs, it is easy and safe for one man to lift each section, due to the small size and lightweight sections.
RISQS & Link-up Achilles Registered Supplier Number 058540 Document Issue date 31/05/16 Document Version 1.0
E:
info@tpa-rrap.com