Vita CAD/CAM Materials by taavi podzuks

VITA Machinable Materials

Date of issue: 05.12

VITA shade, VITA made.

VITABLOCS

Product variations – For dentists and dental laboratories

CAD/CAM Indications

Properties

Special features

VITABLOCS Mark II

• Monochrome, tooth-colored block

VITABLOCS TriLuxe

VITABLOCS TriLuxe forte

VITABLOCS RealLife

• • Subtler nuances of the shade transition • Added chroma in the neck area • Increasing fluorescence in the cervical area

• Tooth areas in different colors: enamel, dentine and neck in one block

Three-dimensional block structure with a dentin core and enamel shell imitates the structure of a natural tooth

• Fine-structure feldspar ceramic • More than 20 years of clinical experience • More than 20 million successful restorations • Antagonist-friendly • Durable - survival rate corresponds to gold standard • Outstanding esthetics with chameleon effect • Customizable and reduced wear of milling tools • Inlays, onlays, veneers • Full and partial crowns in the anterior and posterior area • Sirona CEREC® • Sirona inLab® • KaVo Everest® • Straumann® CAD/CAM production center

VITABLOCS Designation

Dimensions in mm

Pack. cont.

Shade

VITA SYSTEM 3D-MASTER

VITABLOCS Mark II I8 I10 I12 I14 I-40/19

8x8x15 8x10x15 10x12x15 12x14x18 15,5x19x39

10 10 10 5 2

0M1C 0M1C -

1M1C 1M1C 1M1C 1M1C 1M1C

1M2C 1M2C 1M2C 1 1M2C 1 1M2C

2M1C 2M1C 2M1C 2M1C -

2M2C 2M2C 2M2C 1 2M2C1 2M2C

2M3C 2M3C 2M3C 2M3C -

3M1C 3M1C 3M1C 3M1C -

3M2C 3M2C 3M2C1 3M2C1 3M2C

3M3C 3M3C 3M3C 3M3C -

4M2C 4M2C 4M2C 4M2C -

10x12x15 12x14x18 14x14x18

10 5 5

1M2C 1M2C 1M2C

2M2C 2M2C 2M2C

3M2C 3M2C 3M2C

10x12x15 12x14x18 14x14x18 15,5x19x39

10 5 5 2

1M2C 1M2C 1M2C 1M2C

2M2C 2M2C 2M2C 2M2C

3M2C 3M2C 3M2C 3M2C

0M1C 1M1C 1M2C 2M1C 2M2C

3M2C

VITABLOCS TriLuxe TRI-12 TRI-14 TRI-14/14 ®

VITABLOCS TriLuxe forte TF-12 TF-14 TF-14/14 TF-40/19 ®

VITABLOCS RealLife RL-14/14

14x14x18

8x8x15 8x10x15 10x12x15 12x14x18

10 10 10

A1C A1C A1C A1C

A2C A2C A2C A2C

A3C A3C A3C A3C

10x12x15 12x14x18

10 5

A1C A1C

A2C A2C

A3C A3C

10x12x15 12x14x18

10 5

A1C A1C

A2C A2C

A3C A3C

VITA classical

VITABLOCS Mark II I8 I10 I12 I14 ®

VITABLOCS TriLuxe TRI-12 TRI-14 ®

VITABLOCS TriLuxe forte TF-12 TF-14 1

also available for KaVo Everest The following VITABLOCS classical shades may be substituted by the specified 3D-MASTER shades: A1C~1M1C, A2C~1M2C, A3C~2M2C, A3,5C~2M3C, B3C~2M2C VITABLOCS RealLife and VITABLOCS Mark II / TriLuxe forte in the size I-/TF-40/19 can only be processed with the Sirona CEREC / inLab MC XL system using software version V3.80 or later.

VITA In Ceram

For dental laboratories Infiltration ceramic ®

VITA In-Ceram ALUMINA

VITA In-Ceram ZIRCONIA

VITA In-Ceram® VITA In-Ceram® VITA In-Ceram® AL YZ YZ Color LL1p

• Frameworks can be individually colored using VITA YZ COLORING LIQUID before dense sintering • YZ also available as precolored material YZ Color LL1p • Unsurpassed strength

• VITA In-Ceram • VITA In-Ceram • VITA In-Ceram ZIRCONIA features SPINELL features ALUMINA provides the highest masking the highest transthe perfect combi power for discolored lucency of all nation of esthetics stumps oxide ceramics for and strength excellent esthetics

• VITA In-Ceram AL is perfectly suited for tooth-colored primary components

Indications

• Individual coloring of substructures in four lightness levels and glass infiltration with VITA In-Ceram GLASS POWDER in one step • Shrinkage-free processing • Infiltration firing also possible in the VITA VACUMAT

• Anterior crown copings

CAD/CAM

Properties

Special features

VITA In-Ceram SPINELL

Sinter ceramic

• Sirona inLab® • CELAY®

• Crown and anterior • Crown and bridge subbridge substructures structures with up to with up to 3 units 3 units in the anterior and posterior area

• VITA In-Ceram YZ with yttriumstabilized ZrO2 - "the diamond among dental ceramics" for highly stable, thin substructures

• Primary components, • double crowns, crown and anterior bridge substructures with up to 3 units

Crown and multi-unit bridge substructures in the anterior and posterior area

• Sirona inLab® • DISC sizes for all open systems • Reitel AnyCAD

VITA In-Ceram Material variations

Designation

Dimensions in mm

CA-12 CA-40 BA-28 CS-11 CZ-12 CZ-18 BZ-33 BZ-40

10x12x15 14x15x40 14x15x28 10x11x15 10x12x15 14x15x18 14x15x33 14x15x40

AL-20 AL-40 YZ-20/15 YZ-14 YZ-40/15 YZ-20/19 YZ-40/19 YZ-55-Flip2 YZ-553 YZ-65/253 YZ-65/40s3 YZ-85/403* DISC4 DISC4 DISC4 DISC4 DISC4

15,5x19x20 15,5x19x39 14x15x20 13x13x14 14x15x40 15,5x19x20 15,5x19x39 15,5x19x55 15,5x19x55 22x25x65 17x40x65 22x40x85 Ø 98x10 Ø 98x14 Ø 98x18 Ø 98x20 Ø 98x25

Pack. cont.

VITA In-Ceram infiltration ceramic VITA In-Ceram ALUMINA (crown) VITA In-Ceram ALUMINA (crown) VITA In-Ceram ALUMINA (bridge) VITA In-Ceram SPINELL (crown) VITA In-Ceram ZIRCONIA (crown) VITA In-Ceram ZIRCONIA (crown) VITA In-Ceram ZIRCONIA (bridge) VITA In-Ceram ZIRCONIA (bridge)

10 2 2 10 10 5 2 2

VITA In-Ceram sinter ceramic VITA In-Ceram AL (crown) VITA In-Ceram AL (bridge) VITA In-Ceram YZ1 (crown) VITA In-Ceram YZ1 (crown) VITA In-Ceram YZ1 (bridge) VITA In-Ceram YZ1 (crown) VITA In-Ceram YZ1 (bridge) VITA In-Ceram YZ1 (bridge) VITA In-Ceram YZ1 (bridge) VITA In-Ceram YZ1 (bridge) VITA In-Ceram YZ3 (bridge) VITA In-Ceram YZ3 (bridge) VITA In-Ceram YZ (crown / bridge) VITA In-Ceram YZ (crown / bridge) VITA In-Ceram YZ (crown / bridge) VITA In-Ceram YZ (crown / bridge) VITA In-Ceram YZ (crown / bridge) 1 4

also available pre-colored in LL1p for all open systems

not for use in inLab MC XL

only for use in inLab MC XL

4/24 2/10 5/20 20 2/10 5/16 2/10 1/4 1/4 1/3 1 1 1 1 1 1 1

only for use in inLab MC XL and Reitel AnyCAD

VITA Machinable Polymers For dentists and dental laboratories ®

VITA CAD-Waxx

• Filler-free acrylate polymer which burns without leaving any residue

Indications

• Fully or partially anatomical longterm bridge and crown temporaries for up to 2 years wearing time

• Substitute for modelling wax for milling moulds for casting and pressing techniques • Drilling template in implantology • Training block

• • • •

Properties

• Tooth-colored composite blocks or discs for quick fabrication of high-quality and esthetic long-term temporary restorations,available in up to 4 shades • Monochromatic (monoColor) or with four naturally nuanced color layers (multiColor) • Also available as CAD-Temp multiColor blocks in natural shade nuances • Perfect combination of strength and elasticity • Superior resistance to abrasion • MMA-free composite avoids irritation of gingiva and pulp • Can be individualized with the light-curing VITA VM LC composite material • Excellent milling and polishing characteristics

CAD/CAM

VITA CAD-Temp monoColor and multiColor

Sirona CEREC® Sirona inLab® KaVo Everest® DISC sizes for KaVo and all open systems

• Sirona CEREC® • Sirona inLab® • DISC sizes for all open systems

VITA Machinable Polymers Material variations VITA CAD-Waxx (crown / bridge) VITA CAD-Waxx (crown / bridge) VITA CAD-Temp monoColor (crown / bridge) VITA CAD-Temp monoColor (crown / bridge) VITA CAD-Temp monoColor (crown / bridge) VITA CAD-Temp monoColor (crown / bridge) VITA CAD-Temp multiColor (crown / bridge) VITA CAD-Temp multiColor (crown / bridge) 1

for Sirona inLab and Sirona CEREC (incl. MC XL)

Designation

Dimensions in mm

Pack. cont.

CW-401 DISC4 CT-401 CT-552 DISC3 DISC4 DISC4 CTM-401

14 x15x40 Ø 98 x 20 15,5 x19x39 15,5x19x55 Ø 100 x 20 Ø 98 x 20 Ø 98 x 18 15,5x19x39

2/10 1 2/10 1 1 1 1 2/10

for Sirona inLab and Sirona CEREC MC XL

for KaVo Everest

for all open systems

VITA CAD/CAM Materials – Indication table

Oxide ceramic Infiltration ceramic

Fine-structure feldspar Sinter ceramic

VITA In-Ceram VITA In-Ceram VITA In-Ceram VITA In-Ceram VITA In-Ceram SPINELL ALUMINA ZIRCONIA AL YZ

VITABLOCS Mark II

VITABLOCS TriLuxe/ TriLuxe forte

VITABLOCS RealLife

VITA CAD-Temp monoColor/ multiColor

VITA CAD-Waxx

ⳮ

䢇

ⳮ

䢇

ⳮ

嘷

ⳮ

䢇

嘷

ⳮ

䊱

嘷

ⳮ

䢇

嘷

ⳮ

䊱

ⳮ

䢇

ⳮ

䊱

ⳮ

䢇

嘷

ⳮ

䊱

ⳮ

䢇

䊱

ⳮ

䢇

䊱

ⳮ

䢇

䊱

ⳮ

嘷

䢇

嘷

䢇

䊱

ⳮ

嘷

䢇

ⳮ

䢇

䊱

ⳮ

嘷

䢇

ⳮ

䢇

䊱

䢇

嘷

䢇

ⳮ

䊱

ⳮ

䢇

嘷

䢇

ⳮ

䊱

ⳮ

䢇

ⳮ

䊱

嘷

䢇

ⳮ

䊱

ⳮ

䢇

ⳮ

䢇

ⳮ

䊱

ⳮ

䢇

ⳮ

䊱

3) VENEERING MATERIAL

䢇

recommended

Machinable Polymers

VITA VM 7

VITA VM 9

䢇䢇

3) VITA VM 9

3) VITA VM LC

ⳮ

VITA PM 9

嘷 possible

1) maximum width: 2 pontics

2) only for veneer structure for the Rapid Layer Technology

3) only for individualization

䊱 only as substitute for modeling wax

With the unique VITA SYSTEM 3D-MASTER all natural tooth shades are systematically determined and completely reproduced.

1505 E – 0512 (X.) S

Please note: Our products should be used according to the working instructions. We cannot be held liable for damages resulting from incorrect handling or usage. The user is furthermore obliged to check the product before use with regard to its suitability for the intended area of applications. We cannot accept any liability if the product is used in conjunction with porcelains and equipment from other manufacturers which are not compatible or not authorized for use with our product. Furthermore, our liability for the correctness of this information is independent of the legal ground and, in as far as legally permissible, is limited to the invoiced value of the goods supplied excluding turnover tax. In particular, as far as legally permissible, we do not assume any liability for profit loss, for indirect damages, for consequential damages or for claims of third parties against the purchaser. Claims for damages based on fault liability (culpa in contrahendo, breach of contract, unlawful acts, etc.) can only be made in the case of intent or gross negligence. Date of issue of these working instructions: 05.12

VITA Zahnfabrik H. Rauter GmbH & Co. KG Postfach 1338 · D-79704 Bad Säckingen · Germany Tel. + 49(0)7761/562-0 · Fax + 49(0)7761/562 - 299 Hotline: Tel. + 49(0)7761/562-222 · Fax + 49(0)7761/562 - 446 www.vita-zahnfabrik.com · info@vita-zahnfabrik.com