USED WORLD WIDE
WINCHES
Hydraulic Winches Electric Winches Hydraulic Winches
ABUSED WORLD WIDE
ABUSED WORLD WIDE
Continuous duty cycle, smooth operation, and submersible operation are among the electricMarker winches offer superior many benefitsMileofMarker a Mile power Continuous duty operation,a low elecpullingcycle, powersmooth while maintaining steering driven Winch. tricHydraulic current. Fromare theamong potencyAs of athe permaand submersible operation the primary forofthe Army’s nent magnet ATV winch, HMMWV, to the durability many outfit benefits a U.S Mile Marker power of aHydraulic series tool wound recovery system, Winch. the rig rely steering on thisdriven legendary toTruck leadAs your Mile Marker has got you covered. Discover primary outfit for the U.S Army’s HMMWV, through your very own battlegrounds. why Mile Marker winches are proud to be rely on this legendary tool to lead your rig World Wide.™ through yourAbused very own battlegrounds.
2500 POUND ATV/UTILITY WINCH UND HYDRAULIC 9,000 POUND HYDRAULIC FEATURES HI9000 SPECIFICATIONS HI9000
FEATURES PE2500 Planetary Gearing,Vehicle Dynamic Braking, BothKit 12’ Hand Adapter 9,000 POUND HYDRAULIC Required with HI Series Hydraulic Winch
VEHICLE ADAPTER VEHICLE ADAPTER KIT KIT
Control and Handlebar Remote, Heavy Magnet Motor, PartDuty # Permanent Applications Specifications got you Free Spooling and Power In and Power35-5020-15 Out Marker GM,has Dodge, International Part Number 75-50085C HI9000 HI9000 35-5020-07 Ford, up to 1997 Rated Line Pull 9,000 lbs.@1500 PSI (4,090 kgs.) Freespooling Freespooling PE2500 Part Number 75-50085C 35-5020-34 Ford - 1997 and up Part Number 75-50085C Mechanical lock Mechanical Gear Train lock Planetary Part Number 76-50105 Sealed against the 35-5020-51 Jeep (4,090 kgs.) Rated line pull 9,000 lbs.@1500 PSI Sealed against the Gear Ratio 6:1 (low gear) 1:1 (high gear) (4,090 kgs.) Rated line pull 9,000 lbs.@1500 PSI elements Rated line pull 2500 lbs. (1134 kg) Nissan 35-5020-31 elements Gear Train Planetary Motor 14 C.I. Hydraulic Can use underwater Gear Train Planetary Planetary 35-5020-41 Toyota Gear Train Can use underwater Corrosion Directionalresistant Control 12V Solenoid 3 way Gear Ratio 6:1 (low gear)1:1(high gear) Gear Ratio 153:1 35-5020-45 Landrover Stainless Gear steel tie Corrosion resistant Ratio (low gear)1:1(high gear) Required with HI Series Hydraulic Winch Valve Integrated (maximum rated6:1 flow 3.5 gpm)C.I. Motor 14 Hydraulic bars and fasteners (.7kw ), 12 volt Motor .9 hp Perm Magnet 35-5020-17 AM General - Hummer Stainless steel tie draws 2 amps
FEATURES
SPECIFICATIONS
SPECIFICATIONS
WINCH ACCESSORIES:
Directional Control 12VHydraulic Solenoid, 3 way Motor 14 C.I. Illuminated 2-Button & bars and fasteners Control Pendant power in Switch & power out Control Remote Switch, 12’ lead Handlebar switch Valve Integrated3(max flow 3.5 2 speed Directional Control 12V Solenoid, way 13” x 5” x 5” Hoses 2 hoses (5’ and 7’) Steel Braid High Pressure, Dimensions (LxWxH) 12’ Wired Remotex 127mm) Control Pendant power in & power out (330mm x 127mm
withadapt HI Series Hydraulic Winch To beRequired used to power steer-
2 speed
HIadapt Series Winch accessories Toingbepump usedtoto power steer-
gpm) 2 amps
PERFORMANCE HI9000 PERFORMANCE PE2500
System. See Chart for Specific ing Vehicle pump Application. to HI Series Winch
6 JIC swivel female(max flow 3.5 gpm) 2 amps Valve 3,000 PSI rating. Use sizeIntegrated 5’ & 6.5’: steel braid, high pres4200size nominal) 3/16” 50’(Uses on Pendant bothHoses ends. sure, 3kx PSI, 6 JIC swivels on Line Pull Line Speed Motor Cable 12’ Wired Remote Control Features (4.76 MM X 15.2 M) both ends Layer of Cable 4 lbs.1 kgs. 2 fpm Cable3mpm amps@12v 3/8” x 100’ (14,400 nominal) steel braid, 5’ & 6.5’: Cable 3/8” x 100’ (14,400 lbs. presnominal) Line speed-low gear (FPM) 6.16 7.48 8.8 10.5 0 0 19.1 5.8 12 Lock (50 mm) x 2.95” (75 high mm) Drum Size 2.5” (6.4cm)Drum Size: sure, 3k2”PSI, 1500 PSI Freespooling • Power IN/OUT • Mechanical Uses size 6 JIC swivels on 500 9,000 227 7,300 15.3 6,200 4.7Hoses 31 (lbs.) 5,400 SealedRated againstpull the elements • Can use underwater Drum Net Size: 2.5” (6.4 cm)/9” (23cm) weight 24 lbs. (11.8 kg) Diameter both ends 1000 12.8 48 3.9 Cable 2 3 Fasteners speed-high gear (FPM) 33.6 454438.4 5762 Corrosion Line resistant •1Stainless Steel Tie Bars and Bolt Patternweight 3” 4.87”(46.7 kg) Total shipping 103x lbs. 15001,500 680 1,200 9 2.7 Length 90 9” (23cm) Drum Size Rated pull (lbs.) 1,000 900 Cable 3/8” x(76.2 100’mm (14,400 d-low gear (FPM) 6.16 7.48 8.8 10.56.4 Reversible Mounting • 2 Speed 2000 x 124 mm)lbs. nominal) 907 2 114
MANCE HI9000
3.5 GPM @ 1500 PSI
System. See Chart for Specific Vehicle Application. PART NUMBER: APPLICATION:
Winch Accessory Kit
l (lbs.) d-high gear (FPM) l (lbs.)
9,000 33.6 1,500
7,300 38.4 1,200
35-5020-15
Bolt Pattern 10” x 4.5” (4 bolts, 3/8”) Total Shipping 103 lbs. 1.4 154 2.5” (6.4 cm)/9” (23cm) Weight Drum Size:
6,200 11345,400 2500 4.5
35-5020-22
10,500 POUND HYDRAULIC FEATURES PEC8 8000 POUNDFEATURES RECOVERY WINCHSPECIFICATIONS HI10500 HI10500
OUND HYDRAULIC
48 1,000
57 900
Bolt Pattern
NEW DESIGN, Clockable Clutch, Planetary Gear10” 4.5” (4 Illuminated bolts, Controls, 3/8”) Heavy Automatic Loadx Holding Brake,
Freespooling Part Duty Number Permanent Magnet75-50050C Motor, Free Spooling, Power In and Power Mechanical lock Specifications Sealed against the Out, Galvanized Fairlead, lbs.@1500 FRP SheathingPSI on all Cables, 100’ Rated line pull Roller 10,500 (4,770 kgs.) Part Number 75-50050C elements ofTrain 5/16” Aircraft Cable. Planetary Gear Rated Line Pull 10,500 lbs.@1500 PSI Can use underwater (single line)resistant(4,770 Gear kgs.) Ratio Corrosion 6:1 (low gear)1:1(high gear) Gear Train Part Planetary Stainless steel tie Number MotorPart Number75-50050C 17.9 C.I. Hydraulic 77-50140 bars and fasteners
FEATURES HI10500
Marker has got you covered. DisSPECIFICATIONSSPECIFICATIONS HI10500 PEC8
Freespooling Mechanical lock Gear Ratio 6:1 (low gear) Control 12V Solenoid, 3 way(4,770 kgs.) 8,000 LBS (3,629 KG) Rated line pull 2 speed Sealed against the Rated lineDirectional pull 10,500 lbs.@1500 PSI 1:1 (high gear) power in & power out Gear Train 3 Stage Planetary elements Valve Integrated (max flow 3.5 gpm) 2 amps Motor 17.9 C.I. Hydraulic Gear Train Planetary Can use underwaterDirectional Control Ratio 210:1 12V Solenoid 3Gear way Pendant 12’ Wired Remote Control Corrosion resistant Gear Ratio 6:1 (low gear)1:1(high gear) Valve Integrated (maximum 3.5 gpm) draws Motor rated flow 4.1 &HP Perm. Magnet (3 KW) 12V DChigh 5’ 6.5’: steel braid, presPEC8 3.5 GPM @ 1500 PSI sure, 3k PSI,2-Button Uses size 6 JIC swivels on 2 ampsHosesControl Pendant Stainless tie Illuminated Line steel Pull Line Speed Motor Motor 17.9 C.I. Hydraulic both ends Layer of Cable 1 2 Control3Switch 4 Remote Switch, 12’ lead bars and fasteners lbs. kgs. fpm mpm amps@12v CableDimensions (LxWxH) 3/8” 21” X x6.22” X (14,400 8.25” Line speed-low gear (FPM) 100’ 6.43 8.58 2 hoses (5’Control Hoses 7.41 and 7’) Steel Braid 12V High Pressure, 3,000X 158 Directional Solenoid, way MM) lbs. nominal) (533MM MM3X 209.5 2 speed 5.65 0 10,500 0 8,500 13 7,400 3.9 35 PSI rating. Rated pullFeatures (lbs.) 6,400 UseSize: size 6 JIC swivel female on2.5” both ends. Drum (6.4 cm)/9” (23cm) power in & power out 5/16” x(max 100’flow (9,8003.5 nominal) Integrated gpm) 2 amps Line speed-high gear (FPM) 31 36 42 Valve 48
PERFORMANCE HI10500PERFORMANCE
Freespooling • Power IN/OUT • Mechanical Lock 907 2000 11 100 3/8” x 100’ Cable Cable 3.3 (14,400 nominal) weight 103 Total shipping (46.7 kg) (7.94lbs. MM X 30.5M) (lbs.) 1,600 1,300 1,200 1,000 SealedRated against pull the elements • Can use underwater Drum Size Diameter180 2.5” (6.4cm) 12’ Wired Remote 4000 1814 9 2.7 Control Pendant Bolt Drum Pattern 10” (4 (23cm) bolts, 3/8”) Size: 2.5” x(6.44.5” cm)/9” Corrosion resistant • Stainless Steel Tie Bars and Fasteners Drum Size Length 9” (23cm) 2722 6 1.8 230 steel braid, high pres5’ & 6.5’: Reversible Mounting • 2 Speed6000 Net weight 80 lbs. (36 kg) Total Shipping 103 lbs. 1500 PSI sure, 3k PSI, Uses size 6 JIC swivels on Hoses 8000 3629 5 1.5 300 Bolt Pattern 10” x 4.5” (254MM X 114MM) Weight both ends
MANCE HI10500
12,000 POUND HYDRAULIC
Cable d-low gear (FPM) l (lbs.) d-high gear (FPM) l (lbs.)
1 5.65 10,500 31 1,600
OUND HYDRAULIC
2 6.43 8,500 36 1,300
3 7.41 7,400 42 1,200
FEATURES HI12000
35-5020-07
GM, Durango
Dodge, Int’l,
Chevrolet, Ford, up to 1998 H2
1998
NEOPRENEFord COVER PN: 8503 OR 8504 1999 to 04;
35-5020-51
Jeep
35-5020-34 PN 8503: Fits Hydraulic Winches Nissan F-150 1997 to 04
35-5020-31
PN 8504: Fits Electric Winches 6,000
SportTrac 35-5020-41 poundsToyota andFord Greater 35-5020-10
35-5020-45
& Rover Ranger Land
Replacement 35-5020-51 Jeep AM General:
35-5020-17
Cable & hook Hummer H1
35-5020-312005Nissan and up
35-5020-35
Super Duty 35-5020-41FordToyota
35-5020-36
2007 Ford
35-5020-45F-550 Land OnlyRover
Heavy5500 Duty Snatch 35-5020-81 Chevy AM General: 35-5020-17Block & Shackle Hummer H1
2005 and up
SPECIFICATIONS HI12000
35-5020-35 4 (4 bolts, 3/8”) roller fairlead cover Ford Super Duty Cable 3/8” x 100’ (14,400 lbs. nominal) 8.58 Freespooling 2007 Ford SI12000 SI SERIES Part Number 75-52000C 6,400 Mechanical lock Size: Line Pull Line Speed Motor 35-5020-36 Drum 2.5” (6.4 cm)/9” (23cm) Number 76-50152lbs.@1500 (SI12000) PSI 76-50147 Only (5,454(SI95000) kgs.) RatedPart line pull 12,000 lbs. kgs. F-550 fpm mpm amps@12v 48Sealed 12,000against POUNDtheHYDRAULIC elements Total shippingRated 0 0 23 7 90 weight 103 lbs. (46.7 kg) line pull 12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg) 1,000 Gear Train Planetary 35-5020-81 Chevy 5500 Can use underwater
INTEGRATED WINCH SERIES Specifications
Gear Train 10” x Pattern Corrosion resistant Gear Ratio Part NumberBolt 75-52000C Gear Ratio Stainless steel tie Rated Line Pull 12,000 lbs.@1500 Motor PSI bars and fasteners Motor (single line) (5,454 kgs.) Directional Control 2 speed Control Pendant Gear Train power in & power Planetary out
FEATURES HI12000
PERFORMANCE
SPECIFICATIONS
SPECIFICATIONS HI12000
bolts, 3/8”) 6:14.5” (low (4 gear)1:1(high gear)
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
18.7 C.I. Hydraulic
6000
2722
7.9
2.4
230
3 Stage Planetary SI12000: 296:1 4.8 HP
SI9500: 212:1
Series Wound(3.6 KW) 12V DC
12V Solenoid, 3 way Illuminated 2-Button
PERFORMANCE HI12000
Ductile Iron Body
Control Pendant
Hoses MANCE HI12000 WWW.CROFTTRUCKSA.COM
Cable
2003 & up
Ford 1999 &toup 04; 2003 35-5020-34 35-5020-22F-150 1997 to 04 Durango Ford SportTrac 35-5020-10 35-5020-07& Ranger Ford, up to
Valve Integrated (max flow 7 gpm) 2 amps 10” Reversible Mounting Gear Ratio 6:1 (low gear) Dimensions (LxWxH) 21.6” X 6.6” Xneoprene (548mm X 160 MM X 254 MM) 12’ Wired Remote Control Pendant Ductile Iron Body 1:1 (high gear) Freespooling winch 5’ & 6.5’: steel braid,cover high presPart Number 75-52000C 18.7 C.I. Hydraulic 3/8” x 100’(14,400 nominal) Mechanical lock Motor sure, 3k PSI, Uses size 6 JIC swivels on HosesCable (9.53ends MM X 30.5M) Directional Control Solenoid 3 way Rated 12V line pull 12,000both lbs.@1500 PSI (5,454 kgs.) 3.5 GPM @ 1500 PSISealed against the Valve IntegratedCable (maximum flow 3.5 gpm) draws 2 amps 3/8” x 100’ (14,400 lbs. nominal) Drumrated Size: 2.5” (6.4 cm)/9” (23cm) elements 1 Layer of Cable 2 3 Gear48.58 Train Control Switch Remote Switch, leadweight Planetary Drum 12’ Size: 2.5” (6.4 (23cm) Can(FPM) use underwater Net 93 lbs. (42cm)/9” kg) Line speed-low gear 5.65 6.43 7.41 Hoses 2 hoses (5’ and 7’) Steel Braid High Pressure, 3,000 PSI (254MM X 114MM) Pattern 10” gear)1:1(high xlbs.4.5” Rated pull (lbs.) Corrosion12,000 9,400 8,200 resistant Gear7,000 RatioTotalBolt 6:1 (low gear) shipping weight 110 (49.9 kg) recovery/tree Strap size 6 JIC swivel female on both ends. (4 bolts, 3/8”) Line speed-high gear (FPM) 31steel36tie 42 48 rating. Use Stainless Features Bolt Pattern 10” x 4.5” Motor Cable 1,350 3/8” x 100’ (14,400 nominal) 18.7 C.I. Hydraulic Rated pull (lbs.) bars and 2,000 1,550 1,150 fasteners (4 bolts, 3/8”) Freespooling • Power IN/OUT • Mechanical Lock Drum Size Diameter 2.5” (6.4cm) Directional Control 12V Solenoid, 3 way 2 speed Sealed against the elements • Can use underwater Drum Size Length 9” (23cm) inFasteners & power Total outShipping Weight 110 lbs. Corrosion resistant • Stainless Steelpower Tie Bars and Valve Integrated (max flow 7 gpm) 2 amps Mounting Reversible Mounting • 2 Speed •Reversible Reversible Mounting
1500 PSI
Chevrolet, H2
35-5020-15
Total shipping weight 103 lbs. (46.7 kg)
ing, 10,500 POUND HYDRAULIC
GM, Dodge, Int’l,
ACCESSORY KIT PN: 19-0000-1 PART NUMBER: APPLICATION:
WWW.CROFTHITCH.COM Cable 1 2 3 4 WWW.CROFTTRUCKEQUIP.COM Drum Size:
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
PERFORMANCE SI9500 lbs.
kgs.
fpm
mpm
0
0
25.7
7.8
amps@12v 90
2000
907
15.1
4.6
150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
12’ Wired Remote
5’ & 6.5’:
steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends
CALL 210-227-5187
3/8” x 100’1503 (14,400 N. lbs.BRAZOS nominal)
SAN (23cm) ANTONO 2.5” (6.4 cm)/9”
TEXAS 78207
WINCHES ABUSED WORLD WIDE
ABUSED WORLD WIDE
ectric Winches
Hydr
Mile Marker electric winches offer superior pulling power while maintaining a low electric current. From the potency of a permanent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
9,000 POUND HYDRAULIC
mic Braking, Both 12’ Hand y Permanent Magnet Motor,
Marker has got you
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
WINCH ACCESSORIES:
kg)
), 12 volt
FEATURES HI9000
PERFORMANCE HI9000
n &
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
27mm)
nominal)
(75 mm)
)
ACCESSORY KIT PN: 19-0000-1
m)
Clutch, Planetary Gearinated Controls, Heavy ng, Power In and Power hing on all Cables, 100’
you covered. Dis-
10,500 POUND HYDRAULIC
y
KW) 12V DC
n
5 MM)
0 nominal)
1 5.65 10,500 31 1,600
0) 76-50147 (SI95000)
G) & 9,500 lbs (4309 kg)
y
SI9500: 212:1
Motor amps@12v
0
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
n
10000
4536
5.1
1.6
315
0”
12000
5443
4.5
1.4
315
KW) 12V DC
MM)
0 nominal)
(23cm)
M X 114MM)
PERFORMANCE SI9500 fpm
mpm
0
0
25.7
7.8
90
2000
lbs.
kgs. 907
15.1
4.6
amps@12v 150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
WWW.CROFTTRUCKSA.COM WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
FEATURES HI10500
2 6.43 8,500 36 1,300
3 7.41 7,400 42 1,200
4 8.58 6,400 48 1,000
FEATURES HI12000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out Reversible Mounting Ductile Iron Body
M X 114MM)
Line Pull Line Speed lbs. kgs. fpm mpm
4 10.5 5,400 57 900
PERFORMANCE HI10500
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
(23cm)
PERFORMANCE SI12000
3 8.8 6,200 48 1,000
3.5 GPM @ 1500 PSI
12,000 POUND HYDRAULIC
25”
2 7.48 7,300 38.4 1,200
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
NEOPRENE COVER PN: 8503 OR 8504
PN 8503: Fits Hydraulic Winches PN 8504: Fits Electric Winches 6,000 pounds and Greater
)
1 6.16 9,000 33.6 1,500
PERFORMANCE HI12000
75
Rated line pull
9,
Gear Train
Pl
Gear Ratio
6:
Motor
14
Directional Control
12
Valve
In
Control Pendant
12
Hoses
su bo
Cable Drum Size:
1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
5’
3/
2.
Total shipping weight 10 Bolt Pattern
10
SPECIFICATIONS HI10500
Part Number
7
Rated line pull
1
Gear Train
P
Gear Ratio
6
Motor
1
Directional Control
1
Valve
I
Control Pendant
12
Hoses
su bo
Cable
3
Drum Size:
2
5
Total shipping weight 1 Bolt Pattern
1
SPECIFICATIONS HI12000
Part Number
7
Rated line pull
1
Gear Train
P
Gear Ratio
6
Motor
1
Directional Control
1
Valve
I
Control Pendant Hoses
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
SPECIFICATIONS HI9000
Part Number
12
5
su bo
Cable
3
Drum Size:
2
Total shipping weight 1 Bolt Pattern 1 (
CALL 210-227-5187 1503 N. BRAZOS SAN ANTONO TEXAS 78207
WINCHES ABUSED WORLD WIDE
Electric Winches Mile Marker electric winches offer superior pulling power while maintaining a low electric current. From the potency of a permanent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand 2500 POUND ATV/UTILITY WINCH Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Marker has got you
Free Spooling and Power In and Power Out
SPECIFICATIONS PE2500 Part Number
76-50105
Rated line pull
2500 lbs. (1134 kg)
Gear Train
Planetary
Gear Ratio
PERFORMANCE PE2500 Line Pull Line Speed lbs. 0 500 1000 1500 2000 2500
kgs. 0 227 454 680 907 1134
fpm 19.1 15.3 12.8 9 6.4 4.5
mpm 5.8 4.7 3.9 2.7 2 1.4
Motor
amps@12v 12 31 62 90 114 154
8000 POUND RECOVERY WINCH
153:1
Motor
.9 hp
Control Pendant
Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) Cable
lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
13
3.9
35
2000
907
11
3.3
100
4000
1814
9
2.7
180
6000
2722
6
1.8
230
8000
3629
5
1.5
300
Perm Magnet (.7kw ), 12 volt
13” x 5” x 5”
(330mm x 127mm x
127mm)
3/16” x 50’(4200 nominal)
(4.76 MM X 15.2 M)
Drum Size:
2” (50 mm) x 2.95” (75 mm)
Net weight Bolt Pattern
24 lbs. (11.8 kg) 3” x 4.87” (76.2 mm x 124 mm)
ACCESSORY KIT PN: 19-0000-1
FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-
ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
SPECIFICATIONS PEC8
PERFORMANCE PEC8 Line Pull Line Speed
WINCH ACCESSORIES:
INTEGRATED WINCH SERIES
Part Number
77-50140
Rated line pull
8,000 LBS (3,629 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
4.1 HP
Control Pendant
Illuminated 2-Button
Perm. Magnet (3 KW) 12V DC
21” X 6.22” X 8.25” Dimensions (LxWxH) (533MM X 158 MM X 209.5 MM) Cable
5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
PERFORMANCE SI12000
SPECIFICATIONS SI SERIES Part Number
76-50152 (SI12000) 76-50147 (SI95000)
Rated line pull
12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg)
Gear Train
3 Stage Planetary
Gear Ratio
SI12000: 296:1
Motor
4.8 HP
Control Pendant
SI9500: 212:1
Series Wound(3.6 KW) 12V DC
Illuminated 2-Button
21.6” X 6.6” X 10” Dimensions (LxWxH) (548mm X 160 MM X 254 MM) Cable
WWW.CROFTTRUCKSA.COM WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
NEOPRENE COVER PN: 8503 OR 8504
PN 8503: Fits Hydraulic Winches PN 8504: Fits Electric Winches 6,000 pounds and Greater
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
Line Pull Line Speed lbs. kgs. fpm mpm 0
Motor amps@12v
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
PERFORMANCE SI9500 kgs.
fpm
mpm
0
0
25.7
7.8
90
2000
lbs.
907
15.1
4.6
150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
CALL 210-227-5187 1503 N. BRAZOS SAN ANTONO TEXAS 78207
amps@12v
WINCHES ABUSED WORLD WIDE
ABUSED WORLD WIDE
Electric Winches
Hyd
Mile Marker electric winches offer superior pulling power while maintaining a low electric current. From the potency of a permanent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
9,000 POUND HYDRAULIC
, Dynamic Braking, Both 12’ Hand y Duty Permanent Magnet Motor, r Out Marker has got you
net (.7kw ), 12 volt
PERFORMANCE HI9000
-Button & tch
5”
m x
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
WINCH ACCESSORIES:
1134 kg)
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
(4200 nominal) .2 M)
2.95” (75 mm)
.8 kg)
ACCESSORY KIT PN: 19-0000-1
124 mm)
ckable Clutch, Planetary Gear, Illuminated Controls, Heavy Spooling, Power In and Power Sheathing on all Cables, 100’
s got you covered. Dis-
,629 KG)
1 6.16 9,000 33.6 1,500
10,500 POUND HYDRAULIC
netary
agnet (3 KW) 12V DC
2-Button
’(9,800 nominal) 0.5M)
1 5.65 10,500 31 1,600
I12000) 76-50147 (SI95000)
5,443 KG) & 9,500 lbs (4309 kg)
netary
6:1
SI9500: 212:1
Wound(3.6 KW) 12V DC
2-Button
” X 10”
X 254 MM)
(14,400 nominal) 0.5M)
m)/9” (23cm)
kg) ” (254MM /8”)
X 114MM)
Motor amps@12v
0
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
PERFORMANCE SI9500 lbs.
kgs.
fpm
mpm
amps@12v
0
0
25.7
7.8
90
2000
907
15.1
4.6
150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
WWW.CROFTTRUCKSA.COM WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
FEATURES HI10500
2 6.43 8,500 36 1,300
3 7.41 7,400 42 1,200
4 8.58 6,400 48 1,000
FEATURES HI12000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out Reversible Mounting Ductile Iron Body
X 114MM)
Line Pull Line Speed lbs. kgs. fpm mpm
4 10.5 5,400 57 900
PERFORMANCE HI10500
m)/9” (23cm)
PERFORMANCE SI12000
3 8.8 6,200 48 1,000
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
PERFORMANCE HI12000
Gear Train Gear Ratio Motor
Directional Contr Valve Hoses Cable Drum Size:
Total shipping we Bolt Pattern
SPECIFICATIONS HI1
Part Number
Rated line pull Gear Train Gear Ratio Motor
Directional Contro Valve Hoses Cable Drum Size:
Total shipping wei Bolt Pattern
SPECIFICATIONS HI1
Part Number
Rated line pull Gear Train Gear Ratio Motor
Directional Contro Valve Control Pendant Hoses
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
Rated line pull
Control Pendant
12,000 POUND HYDRAULIC
X 8.25”
X 209.5 MM)
2 7.48 7,300 38.4 1,200
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
NEOPRENE COVER PN: 8503 OR 8504
PN 8503: Fits Hydraulic Winches PN 8504: Fits Electric Winches 6,000 pounds and Greater
SPECIFICATIONS HI
Part Number
Control Pendant
3.5 GPM @ 1500 PSI
127mm)
kg) ” (254MM /8”)
FEATURES HI9000
1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
CALL 210-227-5187 1503 N. BRAZOS SAN ANTONO TEXAS 78207
Cable Drum Size:
Total shipping wei Bolt Pattern
WINCHES ABUSED WORLD WIDE
Electric Winches Mile Marker electric winches offer superior pulling power while maintaining a low electric current. From the potency of a permanent magnet ATV winch, to the durability of a series wound Truck recovery system, Mile Marker has got you covered. Discover why Mile Marker winches are proud to be Abused World Wide.™
FEATURES PE2500 Planetary Gearing, Dynamic Braking, Both 12’ Hand 2500 POUND ATV/UTILITY WINCH Control and Handlebar Remote, Heavy Duty Permanent Magnet Motor, Marker has got you
Free Spooling and Power In and Power Out
SPECIFICATIONS PE2500 Part Number
76-50105
Rated line pull
2500 lbs. (1134 kg)
Gear Train
Planetary
Gear Ratio
PERFORMANCE PE2500 Line Pull Line Speed lbs. 0 500 1000 1500 2000 2500
kgs. 0 227 454 680 907 1134
fpm 19.1 15.3 12.8 9 6.4 4.5
mpm 5.8 4.7 3.9 2.7 2 1.4
Motor
amps@12v 12 31 62 90 114 154
8000 POUND RECOVERY WINCH
153:1
Motor
.9 hp
Control Pendant
Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) Cable
lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
13
3.9
35
2000
907
11
3.3
100
4000
1814
9
2.7
180
6000
2722
6
1.8
230
8000
3629
5
1.5
300
INTEGRATED WINCH SERIES
Perm Magnet (.7kw ), 12 volt
13” x 5” x 5”
(330mm x 127mm x
127mm)
3/16” x 50’(4200 nominal)
(4.76 MM X 15.2 M)
Drum Size:
2” (50 mm) x 2.95” (75 mm)
Net weight Bolt Pattern
24 lbs. (11.8 kg) 3” x 4.87” (76.2 mm x 124 mm)
ACCESSORY KIT PN: 19-0000-1
FEATURES PEC8 NEW DESIGN, Clockable Clutch, Planetary Gear-
ing, Automatic Load Holding Brake, Illuminated Controls, Heavy Duty Permanent Magnet Motor, Free Spooling, Power In and Power Out, Galvanized Roller Fairlead, FRP Sheathing on all Cables, 100’ of 5/16” Aircraft Cable.Marker has got you covered. Dis-
SPECIFICATIONS PEC8
PERFORMANCE PEC8 Line Pull Line Speed
WINCH ACCESSORIES:
Part Number
77-50140
Rated line pull
8,000 LBS (3,629 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
4.1 HP
Control Pendant
Illuminated 2-Button
NEOPRENE COVER PN: 8503 OR 8504
PN 8503: Fits Hydraulic Winches PN 8504: Fits Electric Winches 6,000 pounds and Greater
Perm. Magnet (3 KW) 12V DC
21” X 6.22” X 8.25” Dimensions (LxWxH) (533MM X 158 MM X 209.5 MM) Cable
5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
PERFORMANCE SI12000
SPECIFICATIONS SI SERIES Part Number
76-50152 (SI12000) 76-50147 (SI95000)
Rated line pull
12,000 LBS (5,443 KG) & 9,500 lbs (4309 kg)
Gear Train
3 Stage Planetary
Gear Ratio
SI12000: 296:1
Motor
4.8 HP
Control Pendant
SI9500: 212:1
Series Wound(3.6 KW) 12V DC
Illuminated 2-Button
21.6” X 6.6” X 10” Dimensions (LxWxH) (548mm X 160 MM X 254 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
WWW.CROFTTRUCKSA.COM WWW.CROFTHITCH.COM WWW.CROFTTRUCKEQUIP.COM
X 114MM)
Line Pull Line Speed lbs. kgs. fpm mpm 0
Motor amps@12v
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
PERFORMANCE SI9500 fpm
mpm
0
0
25.7
7.8
90
2000
lbs.
kgs. 907
15.1
4.6
amps@12v 150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
CALL 210-227-5187 1503 N. BRAZOS SAN ANTONO TEXAS 78207