SUBMERSIBLE Completely sealed Gear Train is smoothest running self recovery system available.
BUILT TO LAST Ductile Iron Body
(12,000 lb models) and Stainless Steel Fasteners provide unmatched construction for a lifetime of corrosion-free abuse.
The Mile Marker Hydraulic Winch System has been a selfrecovery icon for over a decade. This legendary system utilizes the vehicle’s OEM power steering pump as its power source. Everyday, more than 200 million power steering pumps operate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump. Steering is arguably the most important function while driving, so the power steering pump has evolved into the most reliable system on vehicles today. Mile Marker chose to design a winch to use this continuous reliable power supply over the battery power used by competitors. After rigorous testing, we learned it was the right choice. The Mile Marker Hydraulic Winch can run continuously under load without any battery drain. This Hydraulic Winch System is the choice of the U.S Army, as Mile Marker became the primary self-recovery outfitter for the HMMWV (Hummer) as well as many other tactical vehicles around the globe.
PAGE 4
The H-Series Hydraulic Winch Line offers the most versatility in mounting and installation options. With a completely independent solenoid control valve and multidirectional motor positions, the H Series is the professional choice for a custom recovery system application.
The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. This outfit is designed to be installed with a permanent location in mind.
PAGE 6
PAGE 8
HYDRAULIC WINCH SYSTEMS
SMOOTH OPERATION Planetary
from the elements; vehicle recovery when you would truly need it: covered in mud and water.
PAGE 5
H SERIES HYDRAULIC
FEATURES H9000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed
PERFORMANCE H9000
3.5 GPM @ 1500 PSI
Included in Kit: 12 ft. lead remote control, All hoses and fittings included, Power in and Power out, Remote Solenoid-activated control valve (draws only 2 amps), Adapter for vehicle specific power steering pump. Rated to 7 gpm. Required for H Series Winches.
Chevy/GMC 34-5010-15 34-5020-14 34-5010-12 34-5010-13
Ford
34-5010-09 34-5020-07 34-5010-07H 34-5020-06 34-5020-04 34-5020-05 34-5010-34 34-5020-35 34-5020-10
Dodge
1997+ ford F-150, Expedtion 78-96 Ford full size. 97-98 F250, F350 78-98 Ford full size (with hydroboost) 72-77 Ford full size 83-92 Ford Ranger, 90-94 Explorer 92-96 Ford Ranger, 95-96 Explorer 99-04 Ford 250, 350, 450, 550, Excursion 2005 and up Ford 250, 350,450, 550, Excursion 02+ Ford Ranger/Sport Trac Dodge 94+full size Dodge 72-93 full size
34-5020-22
Dodge Dakota 6 & 8 cylinder
Dodge Dakota 4 cylinder
34-5010-18
Truck & Scout
34-5010-50 34-5020-51 34-5020-55
Jeep Cherokee Jeep CJ, Scrambler Jeep YJ, TJ & Rubicon
Jeep
Nissan 34-5010-30 34-5010-31
Toyota
34-5020-41
Land Rover
34-5010-45
AM Gen.-Hummer 34-5010-01
34-5010-80
PAGE 6
4 10.5 5,400 57 900
PERFORMANCE H10500
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 5.65 10,500 31 1,600
(International 7400)
2 6.43 8,500 36 1,300
3 7.41 7,400 42 1,200
4 8.58 6,400 48 1,000
FEATURES H12000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners Reversible mounting on 3 sides Ductile Iron Body 2 speed
Land Rover Discovery 94-98
General kit; does not include PS pump Valve only; 24-volt system (No hose, fittings)
Medium Duty Trucks
3 8.8 6,200 48 1,000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed
Toyota All
HI (Civilian) H2
34-5011-00
2 7.48 7,300 38.4 1,200
FEATURES H10500
Nissan 86-93 except Pathfinder 9195, 94-96 truck 91-95 Nissan Pathfinder, 9496 truck
34-5010-17 34-5010-15
General kit
1 6.16 9,000 33.6 1,500
88+ GM C/K,99+ Tahoe/Suburban, Silverado 72-87 GM C/K, 88-91 RV series GM S-series GM S-series w/4.3L Vortec
34-5010-24 34-5020-23 34-5010-20
International
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
PERFORMANCE H12000
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
SPECIFICATIONS H9000 Part Number
70-50080C
Rated line pull (single line)
9,000 lbs.@1500 PSI (4,090 kgs.)
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
14 C.I. Hydraulic
Cable
3/8” x 100’ (14,400 lbs. nominal)
Drum Size: Diameter/Length
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
93 lbs. (42.2 kg)
Bolt Pattern
10” x
4.5” (4 bolts, 3/8”)
SPECIFICATIONS H10500 Part Number
70-50050C
Rated line pull (single line)
10,500 lbs.@1500 PSI (4,770 kgs.)
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
17.9 C.I. Hydraulic
Cable
3/8” x 100’ (14,400 lbs. nominal)
Drum Size: Diameter/Length
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
93 lbs. (42.2 kg)
Bolt Pattern
10” x
4.5” (4 bolts, 3/8”)
SPECIFICATIONS H12000 Part Number
70-52000C
Rated line pull (single line)
12,000 lbs.@1500 PSI (5,454 kgs.)
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
18.7 C.I. Hydraulic
Cable
3/8” x 100’ (14,400 lbs. nominal)
Drum Size: Diameter/Length
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
98 lbs. (44.5 kg)
Bolt Pattern
10” x 4.5” (4 bolts, 3/8”)
PAGE 7
HYDRAULIC WINCH SYSTEMS
The Mile Marker H Series Hydraulic Winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. This system is independent from its solenoid control pack to give more freedom in mounting options and vehicle application. The installation of one of the H Series models (H9000, H10500, and H12000) requires a vehicle specific 34-Series valve adapter kit (see application chart below).
HI SERIES HYDRAULIC
FEATURES HI9000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
PERFORMANCE HI9000
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 6.16 9,000 33.6 1,500
2 7.48 7,300 38.4 1,200
3 8.8 6,200 48 1,000
4 10.5 5,400 57 900
FEATURES HI10500
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out
ADAPTERS MIGHT DIFFER FROM ITEMS SHOWN To be used to adapt power steering pump to HI Series Winch System. See Chart for Specific Vehicle Application.
PERFORMANCE HI10500
3.5 GPM @ 1500 PSI
PART NUMBER: 35-5020-15
APPLICATION: GM, Dodge, International, Chevrolet, H2
35-5020-22
2003 & up Durango
35-5020-07
Ford, up to 1998
35-5020-34
1 5.65 10,500 31 1,600
2 6.43 8,500 36 1,300
3 7.41 7,400 42 1,200
4 8.58 6,400 48 1,000
Part Number
75-50085C
Rated line pull
9,000 lbs.@1500 PSI
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
14 C.I. Hydraulic
Directional Control
12V Solenoid, 3 way
Valve
Integtrated
Control Pendant
12’ Wired Remote
Hoses
steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable
(4,090 kgs.)
(max flow 3.5 gpm) 2 amps
5’ & 6.5’:
3/8” x 100’ (14,400 lbs. nominal)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
103 lbs. (46.7 kg)
Bolt Pattern
10” x
SPECIFICATIONS HI10500
4.5” (4 bolts, 3/8”)
Part Number
75-50050C
Rated line pull
10,500 lbs.@1500 PSI
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
17.9 C.I. Hydraulic
Directional Control
12V Solenoid, 3 way
Valve
Integtrated
Control Pendant
12’ Wired Remote
Hoses
(4,770 kgs.)
(max flow 3.5 gpm) 2 amps
5’ & 6.5’:
steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable
3/8” x 100’ (14,400 lbs. nominal)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
103 lbs. (46.7 kg)
Bolt Pattern
10” x
4.5” (4 bolts, 3/8”)
Ford 1999 to 04; F-150 1997 to 04
35-5020-10
Ford SportTrac/Ranger
35-5020-51
Jeep
35-5020-31
Nissan
35-5020-41
Toyota
35-5020-45
Land Rover
35-5020-17
AM General–Hummer H1
35-5020-35
2005 and up Ford Super Duty
35-5020-36
2007 Ford F-550 Only
35-5020-81
Chevy 5500
PAGE 8
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
SPECIFICATIONS HI9000
FEATURES HI12000
Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out Reversible Mounting Ductile Iron Body
PERFORMANCE HI12000
3.5 GPM @ 1500 PSI
Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)
1 5.65 12,000 31 2,000
2 6.43 9,400 36 1,550
3 7.41 8,200 42 1,350
4 8.58 7,000 48 1,150
SPECIFICATIONS HI12000
Part Number
75-52000C
Rated line pull
12,000 lbs.@1500 PSI
Gear Train
Planetary
Gear Ratio
6:1 (low gear)1:1(high gear)
Motor
18.7 C.I. Hydraulic
Directional Control
12V Solenoid, 3 way
Valve
Integrated
Control Pendant
12’ Wired Remote
Hoses
steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends
Cable
(5,454 kgs.)
(max flow 7 gpm) 2 amps
5’ & 6.5’:
3/8” x 100’ (14,400 lbs. nominal)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Total shipping weight
110 lbs. (49.9 kg) 10” x 4.5” (4 bolts, 3/8”)
Bolt Pattern
PAGE 9
HYDRAULIC WINCH SYSTEMS
The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, solenoid control valve, remote pendant, roller fairlead with fasteners, and winch cable. To adapt to your vehicle’s power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) require a vehicle specific 35-series vehicle adapter kit (see below).
EVERYTHING YOU NEED, NOTHING YOU DON’T
Multi-Function Illuminated LED in IP65 Control Box
FEATURES PEC8
PERFORMANCE PEC8 Line Pull Line Speed lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
13
3.9
35
2000
907
11
3.3
100
4000
1814
9
2.7
180
6000
2722
6
1.8
230
8000
3629
5
1.5
300
•Clockable Clutch •Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead
FEATURES SEC9.5 PERFORMANCE SEC9.5 Line Pull Line Speed lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
25.7
7.8
90
2000
907
15.1
4.6
150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
FEATURES SEC12 PERFORMANCE SEC12 Line Pull Line Speed lbs.
PAGE 18
kgs.
fpm
mpm
Motor amps@12v
0
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
SPECIFICATIONS PEC8 Part Number
77-50140
Rated line pull
8,000 LBS (3,629 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
4.1 HP
Control Pendant
Illuminated 2-Button
Perm. Magnet (3 KW) 12V DC
X 6.22” X 8.25” Dimensions (LxWxH) 21” (533MM X 158 MM X 209.5 MM) Cable
5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
ELECTRIC WINCH SYSTEMS
Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. Featuring powerful motors, illuminated controls and planetary gearing, the TOUGH SERIES winches provide expedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
SPECIFICATIONS SEC9.5 Part Number
76-50246
Rated line pull
9,500 LBS (4,309 KG)
Gear Train
3 Stage Planetary
Gear Ratio
212:1
Motor
4.8 HP
Control Pendant
Illuminated 2-Button
Series Wound(3.6 KW) 12V DC
X 6.6” X 7.91” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 200 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
92 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
SPECIFICATIONS SEC12 Part Number
76-50251
Rated line pull
12,000 LBS (5,443 KG)
Gear Train
3 Stage Planetary
Gear Ratio
296:1
Motor
4.8 HP
Control Pendant
Illuminated 2-Button
Series Wound(3.6 KW) 12V DC
X 6.6” X 7.91” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 200 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
92 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
PAGE 19
EVERYTHING YOU NEED, NOTHING YOU DON’T
INTEGRATED SOLENOID WINCHES FEATURES SI9500 PERFORMANCE SI9500 Line Pull Line Speed lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
25.7
7.8
90
2000
907
15.1
4.6
150
4000
1814
10.5
3.2
210
6000
2722
7.9
2.4
270
8000
3629
5.9
1.8
320
9500
4309
4.3
1.3
375
•Integrated Housing •Illuminated Pendant •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
FEATURES SI12000 PERFORMANCE SI12000 Line Pull Line Speed lbs.
PAGE 20
kgs.
fpm
mpm
Motor amps@12v
0
0
23
7
90
2000
907
12.8
3.9
145
4000
1814
9.7
2.9
185
6000
2722
7.9
2.4
230
8000
3629
7.1
2.1
270
10000
4536
5.1
1.6
315
12000
5443
4.5
1.4
315
•Integrated Housing •Illuminated Pendant •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor
SPECIFICATIONS SI9500 Part Number
76-50147
Rated line pull
9,500 LBS (4,309 KG)
Gear Train
3 Stage Planetary
Gear Ratio
212:1
Motor
4.8 HP
Control Pendant
Illuminated 2-Button
Series Wound (3.6 KW) 12V DC
X 6.6” X 10” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 254 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
ELECTRIC WINCH SYSTEMS
Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. Featuring powerful motors, illuminated controls and planetary gearing, the TOUGH SERIES winches provide expedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
X 114MM)
SPECIFICATIONS SI12000 Part Number
76-50152
Rated line pull
12,000 LBS (5,443 KG)
Gear Train
3 Stage Planetary
Gear Ratio
296:1
Motor
4.8 HP
Control Pendant
Illuminated 2-Button
Series Wound(3.6 KW) 12V DC
X 6.6” X 10” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 254 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
PAGE 21
EVERYTHING YOU NEED, NOTHING YOU DON’T
Multi-Function Illuminated LED in IP65 Control Box
FEATURES PE6000
PERFORMANCE PE6000 Line Pull Line Speed lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
15
4.6
35
1000
454
11
3.3
80
3000
1361
8
2.5
100
5000
2268
5
1.5
145
6000
2722
4.6
1.4
170
•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead
lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
13
3.9
35
2000
907
11
3.3
100
4500
2041
9
2.7
180
6000
2722
6
1.8
230
8000
3629
5
1.5
300
PAGE 22
lbs.
kgs.
fpm
mpm
Motor amps@12v
0
0
15
4.6
33
3000
907
11.2
3.4
120
6000
1814
8.1
2.5
210
9000
2722
5
1.5
305
76-50230
Rated line pull
6,000 LBS (2,722 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
3.6 HP
Control Pendant
Illuminated 2-Button
Perm. Magnet (2.7 KW) 12V DC
X 6.22” X 7.28” Dimensions (LxWxH) 17.24” (438MM X 158 MM X 185 MM) 5/16” x 85’(9,800 nominal) (7.94 MM X 26.06M)
Drum Size:
2.5” (6.4 cm)/5.5” (140 Cm)
Net weight Bolt Pattern
68 lbs. (31 kg) 6.535” x 4.5”
(166MM X
114MM)
•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead
SPECIFICATIONS PE8000 Part Number
76-50240
Rated line pull
8,000 LBS (3,629 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
4 HP
Control Pendant
Illuminated 2-Button
•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead
Perm. Magnet (3 KW) 12V DC
X 6.22” X 8.25” Dimensions (LxWxH) 21” (533MM X 158 MM X 209.5 MM) Cable
FEATURES E9000
PERFORMANCE E9000 Line Pull Line Speed
Part Number
Cable
FEATURES PE8000
PERFORMANCE PE8000 Line Pull Line Speed
SPECIFICATIONS PE6000
ELECTRIC WINCH SYSTEMS
Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. Featuring powerful motors, illuminated controls and planetary gearing, the TOUGH SERIES winches provide expedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.
5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)
X 114MM)
SPECIFICATIONS E9000 Part Number
76-50042
Rated line pull
9,000 LBS (4,090 KG)
Gear Train
3 Stage Planetary
Gear Ratio
210:1
Motor
4.4 HP
Control Pendant
Illuminated 2-Button
Perm. Magnet (3.35 KW) 12V DC
X 6” X 6.38” Dimensions (LxWxH) 21.45” (544MM X 152 MM X 162 MM) Cable
3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)
Drum Size:
2.5” (6.4 cm)/9” (23cm)
Net weight Bolt Pattern
84 lbs. (38.1 kg) 10” x 4.5” (254MM X 114MM)(4 bolts, 3/8”)
PAGE 23
EVERYTHING YOU NEED, NOTHING YOU DON’T
Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. The PE models are a compact, battle-proven resource for your trail conquering ATV. These winches feature the no compromise, all metal construction of all other models, without the innovative control of MiFi Technology™. The TOUGH SERIES, PE winches will get down to work, and get you through your path.
FEATURES PE2500
PERFORMANCE PE2500 Line Pull Line Speed kgs. 0 227 454 680 907 1134
fpm 19.1 15.3 12.8 9 6.4 4.5
mpm 5.8 4.7 3.9 2.7 2 1.4
amps@12v 12 31 62 90 114 154
Part Number
76-50105
Rated line pull
2500 lbs. (1134 kg)
Gear Train
Planetary
Gear Ratio
153:1
Motor
.9 hp
Control Pendant
Illuminated 2-Button & Handlebar switch
Dimensions (LxWxH) Cable
Perm Magnet (.7kw ), 12 volt
13” x 5” x 5”
(330mm x 127mm x
127mm)
3/16” x 50’(4200 nominal) (4.76 MM X 15.2 M)
Drum Size:
2” (50 mm) x 2.95” (75 mm)
Net weight Bolt Pattern
24 lbs. (11.8 kg) 3” x 4.87” (76.2 mm x 124 mm) SYSTEMS
lbs. 0 500 1000 1500 2000 2500
Motor
•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor •Includes both Handle bar Switch and 12’ Wired Pendant
SPECIFICATIONS PE2500
PERFORMANCE PE3000 Line Pull Line Speed kgs.
fpm
mpm
amps@12v
0
0
10
3
15
76-50110
Rated line pull
3,000 lbs. (1362 kg)
Gear Train
Planetary
Gear Ratio
153:1
Motor
1.8 HP
Control Pendant
Illuminated 2-Button
Cable
Perm. magnet (1.3 kw), 12V
12.9” x 4.22” x 4.3”
(330.2mm x 107mm x 112.5mm)
3/16” x 50’(4200 nominal) (4.76 MM X 15.2 M)
800
363
8
2.4
50
Drum Size:
1.5 (38mm) x 3.2” (82mm)
1500
680
7.2
2.2
80
2200
1000
6.6
2.0
110
Net weight Bolt Pattern
3000
1362
4.6
1.4
145
21 lb (9.6 kg) 3 Bolt, 1.9” x 3.07” (48 mm x 78 mm)
FEATURES PE3500 •Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor
PERFORMANCE PE3500 Line Pull Line Speed PAGE 30
Part Number
Dimensions (LxWxH)
Motor
lbs.
SPECIFICATIONS PE3000
SPECIFICATIONS PE3500 Part Number Rated line pull
76-50112 3,500 lbs. (1589 kg)
Gear Train
Planetary
Gear Ratio
262:1
Motor
2 HP
Control Pendant
Illuminated 2-Button
Dimensions (LxWxH) Motor
lbs.
kgs.
fpm
mpm
amps@12v
0
0
12
3.7
15
1000
454
9.2
2.8
40
2000
908
7.5
2.3
80
3000
1362
5
1.5
120
3500
1589
4
1.2
140
WINCHING
•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor
ATV
FEATURES PE3000
Cable
Perm. Magnet (1.5kw), 12 volt
13.4” x 4.22” x 4.3”
(340.2mm x 107mm x 112.5mm)
7/32” x 45’(5600 nominal) (5.45 MM X 13.7 M)
Drum Size:
1.5 (38mm) x 3.2” (82mm)
Net weight Bolt Pattern
23 lb (10.6 kg) 1.9” x 3.07” (48 mm x 78 mm)
PAGE 31
Utility Winches FEATURES PE2000
PERFORMANCE PE2000 Line Pull Line Speed kgs. 0 454 680 907
fpm 14 9 7.5 5.9
mpm 4.3 2.7 2.3 1.8
amps@12v 14 60 90 115
Part Number
76-50100
Rated line pull
2,000 lbs. (907 kg)
Gear Train
Planetary
Gear Ratio
153:1
Motor
1.5 hp
Control Pendant
2-Button
Dimensions (LxWxH) Cable
Perm Magnet (1kw) 12V
12.2” x 4.13” x 4.35” (309mm x 105mm x
111mm)
5/32” x 50’ (4200 nominal) (4 MM X 15.2 M)
Drum Size:
2.56”(65 mm) x 2.86” (72.6 mm)
Net weight Bolt Pattern
15 lb (6.6 kg) T-Shaped 3” (76.2mm) x 1.9” (48.3mm)
ATV
lbs. 0 1000 1500 2000
Motor
•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor •Includes both Handle bar Switch and 12’ Wired Pendant
SPECIFICATIONS PE2000
SYSTEMS
Mile Marker’s TOUGH SERIES recovery systems have you covered from the trail, to the trailer, and from the clay to the construction site. These utility winches have infinite uses, and you can count on them to get the job done over and over again.
WINCHING
EVERYTHING YOU NEED, NOTHING YOU DON’T
FEATURES PE4500 •Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor
PERFORMANCE PE4500 Line Pull Line Speed
PAGE 32
SPECIFICATIONS PE4500 Part Number Rated line pull
76-50115 4,500 lbs. (2,043 kg)
Gear Train
Planetary
Gear Ratio
294:1
Motor
1.9 HP
Control Pendant
Illuminated 2-Button
Dimensions (LxWxH) Motor
lbs.
kgs.
fpm
mpm
amps@12v
0
0
14
4.3
35
1500
680
6.6
2
80
2200
998
5.2
1.6
100
3000
1361
4.6
1.4
145
4500
2041
3.3
1
170
Cable
Perm. Magnet(1.4kw), 12 volt
17.16” x 6.2” x 7.3”
(436mm x 152mm x 185mm)
1/4” x 85’(7000 lbs. nominal)(5.45 MM X 13.7 M)
Drum Size:
2.5 (63mm) x 5.5” (140mm)
Net weight Bolt Pattern
51 lb (23 kg) 6.535” x 4.5” (166 mm x 114.3 mm)
PAGE 33