®
Tommy Gate Rail Gate Series
MERICA’ SS F IRST IRST N AME AME IN IN L IFTGATES IFTGATES AMERICA
™
Standard Features
Rail Gate Features A: Platform Power Open & Close (see below) B: Safety Trip Bar (see below) C: NEW - Standard recessed lights work with foreign and domestic wire harnesses
D: NEW -Recessed license plate holder E: Electrical and hydraulic systems are enclosed in the liftgate, protected form the elements. The Main Frame Box is accessible with platform raised or lowered. A full-length molded ground and power cable provides a direct connection from the liftgate to the truck battery. A 150-amp circuit breaker with manual reset is included. A Pressure Relief Valve helps prevent overloading the platform.
F: Secure “drop-in” style platform latches G: Platform: Extruded Aluminum (shown - see pg 4) or Treadplate Steel (see pg 4), both with Extruded Aluminum sliders (see below)
H: Curb-side fixed control with shield -Toggle style switch -Timer deactivates 90 seconds after last operation (helps prevent unauthorized use)
Power Open and Close System
Safety Trip Bar Tommy Gate Exclusive
A
B
C
Standard on all models of the Rail Gate Series (except GBR models), the cam arm system (photo A) powers the platform (photos B & C) open and close. (see note pg 4)
Standard Recessed Light Kit
The standard Safety Trip Bar, located below the Rail Gate’s enclosed hydraulic and electrical systems, will immediately stop the upward movement of the platform if any object becomes trapped between the platform and the liftgate frame. Tommy Gate’s Rail Gate Safety Trip Bar is standard safety equipment, exclusive to its class.
Standard Aluminum Sliders ❖ Extruded Aluminum sliders are standard on all Rail Gate models, on all platforms. A new-design recessed light kit is standard on all Rail Gate models. The Main Frame Box cover also features a recessed license plate holder.
❖ Aluminum Sliders feature polyethylene wear pads and operate smoothly with only lightweight oil. Using grease - which can congeal or attract road grit - is not recommended.
Platform Latch Lock Each Rail Gate model includes a lockable platform latch and pin system.
Warranty: Tommy Lift Rail Gate Series liftgates have a oneyear warranty from date of purchase. Pump and motor units have a two-year warranty.
Meets all TMC guidelines
1-800-LIFTGATE
Rail Gate Specifications (min-max)
Travel
Gate Width
Clear Opening
Capacity
(min = loaded,
(outside
(inside
(pounds)
max = unloaded)
uprights)
uprights)
Model
Measurements are in inches, unless noted.
Platform Loadable Area Platform (WxD) Taper
Gate Weight
App Code
(pounds)
All Steel Lifts - Treadplate steel platfor m, steel liftgate frame
85-16 85-16 85-16 85-16 89-16 89-16 89-16 89-16
S S S AB S AB S S S AB S AB
1600 1600 1600 1600 1600 1600 1600 1600
32-54 32-54 32-54 32-54 32-54 32-54 32-54 32-54
90 90 90 90 94 94 94 94
83 83 81 81 87 87 85 85
85x37 85x42 85x37 85x42 89x37 89x42 89x37 89x42
6 6 6 6 6 6 6 6
B B B B A A A A
790 840 820 870 810 860 840 890
85-20 85-20 85-20 85-20 89-20 89-20 89-20 89-20
S S S AB S AB S S S AB S AB
2000 2000 2000 2000 2000 2000 2000 2000
32-54 32-54 32-54 32-54 32-54 32-54 32-54 32-54
90 90 90 90 94 94 94 94
83 83 81 81 87 87 85 85
85x37 85x42 85x37 85x42 89x37 89x42 89x37 89x42
6 6 6 6 6 6 6 6
B B B B A A A A
790 840 820 870 810 860 840 890
6 6 6 6 6 6 6 6
B B A A B B A A
695 725 715 745 695 725 715 745
6 6 6 6 6 6 6 6
C C C C C C C C
585 610 600 620 585 610 600 620
Aluminum/Steel Lift - Extr uded Aluminum platfor m, steel liftgate frame
85-16 A 85-16 A AB 89-16 A 89-16 A AB 85-20 A 85-20 A AB 89-20 A 89-20 A AB
1600 1600 1600 1600 2000 2000 2000 2000
32-54 32-54 32-54 32-54 32-54 32-54 32-54 32-54
90 90 94 94 90 90 94 94
83 81 87 85 83 81 87 85
85x55a 85x55a 89x55a 89x55a 85x55a 85x55a 89x55a 89x55a
All Aluminum Lift - Extruded Aluminum platfor m, aluminum liftgate frame
A85-16 A A85-16 A AB A89-16 A A89-16 A AB A85-20 A A85-20 A AB A89-20 A A89-20 A AB
1600 1600 1600 1600 2000 2000 2000 2000
32-54 32-54 32-54 32-54 32-54 32-54 32-54 32-54
92 92 96 96 92 92 96 96
83 81 87 85 83 81 87 85
85x55a 85x55a 89x55a 89x55a 85x55a 85x55a 89x55a 89x55a
Steel Gas Bottle Rack - Treadplate steel platform with folding Gas Bottle Rack fence and taper, steel frame
85-20 85-20 89-20 89-20
S GBR S AB GBR S GBR S AB GBR
2000 2000 2000 2000
32-54 32-54 32-54 32-54
Spec Notes S - Treadplate Steel platform A - Extruded Aluminum platform AB - Above Bed model GBR - Gas Bottle Rack model
90 90 94 94
83 81 87 85
85x30 85x30 89x30 89x30
Application Code Steel Frame Rail Gates Body Style A. Flatbed, Stake & Van B. Flatbed, Stake & Van
Body Width 96" 90"
12 12 12 12
B B A A
785 815 805 840
All-Aluminum Rail Gates C. Widths for the Aluminum Frame Rail Gates are listed below.
All Aluminum Rail Gate Models - Mounting Flanges All Aluminum models can be bolted onto the truck body using the attached flanges (aluminum frame only). The Gate Width measurements include the side flanges (one each side - outside the frame) where the bolt holes are located. Model Model Model Model
73 79 85 89
Gate Width (outside flanges) 80" 86" 92" 96"
Distance between bolt-hole centers 79 3/8" 85 3/8" 91 3/8" 95 3/8"
Max Travel 52" 52" 54" 54"
Rail Gate Models Rail Gate Specification Notes
Steel Platform/Steel Frame ❖ Treadplate Steel loading surface ❖ Reinforced taper - 6" (37" and 42" platform loading depths) or 11" (37" platforms only) ❖ Both sides of the platform and taper are completely sealed along the full length of the platform.
Optional Model Widths Steel/Steel or Aluminum/Steel Models
❖ Model 73 (Gate Width 78", Platform Width 73", Max Travel 50") for 80" wide truck bodies (most lift configurations) ❖ Model 79 (Gate Width 84", Platform Width 79", Max Travel 52") for 85" wide truck bodies (most lift configurations)
❖ Model 95 (Gate Width 100", Platform Width 95", Max Travel 54") for 102" wide truck bodies (most lift configurations)
Extruded Aluminum Platform Steel Frame or Aluminum Frame ❖ The Extruded Aluminum Platform is made of 6061-T6 aircraft-quality aluminum extrusions locked together with tongue and groove connections - no skip welding used. ❖ Double-walled construction ❖ Aluminum Platforms can be ordered with larger loading depths. (see Specification Notes at left) ❖ The optional Split Cart Stop is built into the platform (see next page)
❖ Extruded Aluminum Tapers in 6" and 12" lengths (see next page)
❖ Extruded Aluminum resists weather-related corrosion (no rust).
Optional Platform Depth Extruded Aluminum Platforms Only a - Since the Aluminum platform is composed of 5" extrusions, the standard 55" flat loading depth can be extended in 5" increments to a maximum of 70" (plus 12" taper) or shortened in 5" increments to 35".
Please Note The Power Open & Close system is not available on Rail Gates with 1600 lbs capacity and 65 or 70 inch flat loading depths. For these models, a Torsion Bar is required. All 2000 lbs capacity Extruded Aluminum platform models are available with Power Open & Close. All Treadplate Steel platform models (except GBR) are available with Power Open and Close.
For more information & local distributors, please call 1-800 LIFTGATE or visit tommygate.com
Tongue and groove connections between extrusions
Extruded Aluminum Platform surface
Steel Gas Bottle Rack (GBR) Model Steel Platform/Steel Frame ❖ The 12" steel hinged folding ramp aids in loading and unloading. ❖ The redesigned 29.25" tall rack can be folded down for unobtrusive loading. The platform can be vertically dropped below bed height (depending on truck bed height) for access to the truck bed.
GBR ready to load or unload.
❖ The Steel Gas Bottle Rack folds for easy storage while still remaining intact, ready for use. ❖ Capacity: 2000 lbs only. ❖ Torsion Bar (closure-assist) only; Power Open & Close cam arm system not available
The fence can be collapsed for easier dock loading and access to the truck bed. Gate secured for travel and storage.
Aluminum Platform/Aluminum Frame The All-Aluminum Rail Gate models are available in most model configurations (see Specifications at left)
Rail Gate Options Split Cart Stop Available for the Extruded Aluminum Platform, the optional Split Cart Stop is integrated into the platform and is spring-activated with a lever (photo A). The Cart Stop is split in two sections across the width of the platform; Each side of the Cart Stop can be activated or locked down (deactivated) together or independently. (photos B and C) To aid in loading wheeled cargo, add the optional 12" taper (see below). Note: With the stop open, the platform loses 5 inches of flat, loadable surface where the cart stop’s extrusion is located.
A
B
C
Platform Tapers Remote Pendant & Dual Control
12” Aluminum taper with 10-degree rise
11” steel taper with 14-degree rise
The 12" taper makes Tommy Gate’s Extruded Aluminum Platform easily accessible to carts, dollies, or wheeled machines.
An 11" taper is available on 37" deep Treadplate Steel platforms. Tapers facilitate loading and unloading wheeled materials.
The optional Remote Pendant Control can be specified in addition to or in place of the standard Curb-side mounted Fixed Control.
Platform Bumpers Platform bumpers provide a rubber cushion between the platform and the ground surface. (set of 4)
12” Extruded Aluminum taper
Above Bed (AB) Model
For applications involving trucks with low bed heights, consider the Rail Gate Above Bed model. The operator can raise the liftgate platform above the truck bed to reach a dock or similar area. The Above Bed model rises to a maximum height of 54" (see Specifications) above the ground. For example, if a truck bed is 40" off the ground, an Above Bed liftgate will raise 14" above the bed height. Actual height reached above bed will depend on truck bed height.
Torsion Bar Option Instead of the Rail Gate’s standard Power Open & Close cam arm system (see Standard Features), a closure-assist Torsion Bar can be substituted.
Bed Height Model The Bed Height model’s platform will lift up to the level of the truck bed (loading height), but no higher.
(see GBR and optional platform depth notes for exceptions)
This is the suggested model for standard loading and unloading.
❖A Torsion Bar is recommended for some trucks with
The Bed Height model has a minimum travel of 32 inches and a maximum of 54 inches (see Specifications). The actual travel is equal to the height of the truck bed off the ground.
Manufacturing Plant with questions.)
bed heights lower than 32 inches. (Please contact the
❖For forklift or dock loading, choosing the Torsion Platform dropped below bed-height for loading
1-800-LIFTGATE
Bar option allows the platform to be dropped vertically below the bed height (depending on platform size and bed height), allowing for easier truck bed access.
For more information and specifications on specific liftgate models, please see the separate sales literature for the various applications and models. - Pickup Lift Series
-Service/Utility Body Series
G2 dual drive Series
Original Series
G2 dual drive Series
Original Series
- Cargo Van & Sprinter Series
- Flatbed, Stake & Van/Lift N Dump
Original Series Original Series
Model 650
(inside mount)
Lift N Dump Applications for Platform and Box Dump Bodies
Tommy Gate Company PO Box 8, Bus Brown Dr, Woodbine, IA 51579
1-800-LIFTGATE (1-800-543-8428) In 1965, Delbert “Bus” Brown designed and built the first Tommy Lift hydraulic liftgate in his machine
In Iowa or Overseas - (712) 647-2050 Fax (712) 647-2417 info@tommygate.com
shop in Woodbine, Iowa. Named after his son, the
Distributed By:
TOMMY LIFT® original hydraulic liftgate was designed to help move heavy loads into and out of pickup trucks. Still in Iowa after 40 years, Tommy Gate Company has a newly-expanded
150,000
square foot factory with a state-of-the-art production system that manufactures today’s finest liftgates. If you have any questions about your application, Tommy Gate liftgate features or options, please call our Customer Service department at the Woodbine Factory. They are available from 7 am to 5 pm CST Monday-Friday and can be reached at 1-800-LIFTGATE.
Every Tommy Gate liftgate is proudly made in Woodbine, Iowa
www.tommygate.com More photos! Video of liftgates in action!
Corporate Office: 11010 N Tatum Blvd Suite 100, Phoenix AZ 85028 (602) 955-2144 Fax: (602) 955-3902
Warning:
The latest news, specifications and downloadable literature
10/2005
Tommy Lifts are industrial products for material handling only and are not to be used as a personnel or wheelchair
lift. For safe handling and operating instructions, visit www.tommygate.com.
Caution:
Before installing this Lift Gate, please observe the Vehicle Loading Limitations. These loading limitations are outlined
in the Vehicle’s Owner’s Manual and the Safety Compliance Certification Label located on the driver’s door pillar.
Note:
Tommy Gate Company reserves the right to make changes in manufacturing to comply with current or new engineering
specification changes where applicable.