HITCH ACCESSORIES HITCH LOCKS by Croft Supply and Distribution

HITCH ACCESSORIES HITCH LOCKS TUBE COVERS

HITCH LOCKS RECEIVER TUBE COVERS Part no. QTY. MATERIAL SPORTFRAME AND FRAME HITCH, 1-1/4” SQUARE RECEIVERS: 5354 1 Disp. Pkg. Metal

1944 01944-010

5351 5352

5330

5362 7010 07010-024 7050

5363

2211

1202 01202-024 5363

6788 06788-010

6433

Plastic

Black

2211

1 Bulk

Rubber

Black

6434 6430

UPRATED!

6429

Chrome

10 Bulk

Plastic

Chrome

5352

1 Disp. Pkg.

Metal

Chrome

1202

1 Disp. Pkg.

Plastic

Black

01202-024

24 Bulk

Plastic

Black

5363

1 Disp. Pkg.

Plastic

Black

5330

1 Disp. Pkg.

Rubber

Black

6788

1 Disp. Pkg.

Rubber

Black

06788-010

10 Disp. Pkg.

Rubber

Black

7010

1 Bulk

Rubber

Black

07010-024

24 Bulk

Rubber

Black

7050

1 Disp. Pkg.

Rubber

Black

6431

NEW PRODUCT! 63240

NEW OFFERING! FORMERLY

Chevrolet logo, fits all 2” receivers

6432

Dodge Ram logo, fits all 2” receivers

6433

Ford oval logo, fits all 2” receivers

6434

GMC logo, fits all 2” receivers

6435

6429

Jeep logo, fits all 2” receivers Adapts 6430-6435 Tube Covers to 1-1/4” receivers

63203

5/8” Integral Pin & Clip, stainless

63204

1/2” Integral Pin & Clip, zinc

63205

5/8” Integral Pin & Clip, zinc

hitch locks with 1/2” diameter 63211 1 Stainless Steel Lock for 1-1/4” receivers Pro-Tech Lock for 1-1/4” 63214 1 Deadbolt receivers 63216 1 Deadbolt Lock for 1-1/4” receivers

63205

Bent Pin Deadbolt Lock for 1-1/4” receivers Universal Hitch Lock w/Sleeve for 1-1/4”, 2”, & 2-1/2” rec. hitch locks with 5/8’ diameter 63212 1 Stainless Steel Lock for 2” rec.

63211

63212

UPRATED! NOW UPRATED!

63224

63234

63215

Deadbolt Pro-Tech Lock for 2” rec.

63217

Deadbolt Lock for 2” rec.

63223

63231

63234

Bent Pin Deadbolt Lock for 2” or 2-1/2” rec. Bent Pin Lock w/barrel body for 2” or 2-1/2” rec. Universal Hitch Lock w/Sleeve for 1-1/4”, 2” & 2-1/2” rec.

Part no.

QTY.

Description

63215

NEW PRODUCT! 63235

combo locks (hitch and trailer) Arm Lock for 2-1/2” Wide 63235 1 Single Ball Mnt. Platform w/1” Ball Hole Dual Arm Lock for 2-1/2” Wide 63236 1 Ball Mnt. Platform w/1” Ball Hole Single Arm Lock for 3” Wide 63237 1 Ball Mnt. Platform w/1” Ball Hole Arm Lock for 3” Wide 63237 1 Dual Ball Mnt. Platform w/1” Ball Hole

63237

NEW!

UPRATED!

NEW OFFERING!

NOW UPRATED!

FORMERLY

NEW PRODUCT! NEW!

63232

NEW OFFERING!

Trailer Guardian locks • Helps prevent accidental decoupling • Ability to lock and secure the trailer on the tow vehicle •Two piece construction Part no. QTY. Description silent hitch pin and lock system 63232 1 Class lll Silent Hitch Pin

Eliminates noise associated with hitch accessories rattling against receiver tube. Unique design holds drawtube tight inside hitch receiver tube. For use with hollow shank ball mounts only.

PINS, CLIPS & J-PIN® Part no. QTY. Description pins & clips 63241 1 Pkg. Class l/ll Pin & Clip, 1/2”, groove style 63241-050

NEW!

6431

Attractive point-of-purchase packaging • Foam gasket included for exact fit • Heavy chrome face features popular OEM manufacturer logos • OEM licensed

NOW PINS, CLIPSUPRATED! & J-PIN®

06237

Plastic

01944-010

Part no. QTY. Description Logo receiver tube covers 6430 1 Draw-Tite “D” logo, fits all 2” receivers

6432

63223

Chrome

1 Disp. Pkg.

specialty receiver tube covers Part no. QTY. Description MATERIAL SPORTFRAME AND FRAME HITCH, 1-1/4” SQUARE RECEIVERS: 1 Disp. US Flag Receiver Tube Plastic 8895 Pkg. Cover 1 Disp. Propeller Receiver Tube Plastic 40113 Pkg. Cover, Chrome Look 2” Square Receivers: 1 Disp. US Flag Receiver Tube Plastic 8896 Pkg. Cover 1 Disp. Propeller Receiver Tube Plastic 40114 Pkg. Cover, Chrome Look

40113 40114

6435

COLOR

5362

2” Square Receivers: 1944 1 Disp. Pkg.

Part no. QTY. Description Swivel pins (Packaged) 63202 1 1/2” Integral Pin & Clip, stainless

63240

Pkg. Class lll/lV Pin & Clip, 5/8”, groove style

63240-050

Class lll/lV Pin & Clip, 5/8”, groove style (50-pk)

Pkg. Class lll/lV Pin & Clip, 5/8”, hole style

63242-050

Class lll/lV Pin & Clip, 5/8”, groove style (50-pk)

6430 63242

FORMERLY

Class l/ll Pin & Clip, 1/2”, groove style (50-pk)

63045

63043

63041

63242-100 100 Class lll/lV Pin & Clip, 5/8”, groove style (100-pk) 63242-500 500 Class lll/lV Pin & Clip, 5/8”, hole style (500-pk) 63243

Pkg. Class V Pin & Clip, 5/8”, hole style

55010 63243-050 50 Class V Pin & Clip, 5/8”, groove style (50-pk)

Pins and clips are included with all Class I and II hitches.

63201

06237

Class l/lV Pin & Clip, 1/2”, groove style

06237-050

Class l/lV Pin & Clip, 1/2”, groove style (50-pk)

55010

Class lll/lV Pin & Clip, 5/8”, groove style

55010-050

Class lll/lV Pin & Clip, 5/8”, groove style (50-pk)

55515 55515-050

1 50

Bulk Clip Bulk Clip (50-pk)

J-PIN®ANTI-RATTLE PIN W/BARREL LOCKSET stabilizing pin with lock More than just a hitch pin, J-Pin® quickly and confidently secures ball mounts and other hitch-mounted accessories, eliminating the sway and rattle caused by part clearance issues. J-Pin® ready receiver design allows for the most confident and secure hookup in today’s towing market by compressing the hitch-mounted accessory against the inner side wall of the hitch receiver tube. Once attached, the hitch and towing components seem virtually welded together. Packaged complete with its integral ball mount lock, J-Pin® makes your towing system complete.

Insert J-Pin® through large hole in receiver hitch

63046

63047

Part no. QTY. Description one-piece pintle hook 63043 1 5-Ton Receiver Mount Tighten nut on J-Pin shaft, compressing ball mount or hitch-mounted accessory against receiver tube ®

one-piece pintle COMBINATIONS 63040 1 1-7/8” Receiver Mount

63044 MAX GTW

BALL GTW

MAX VL

10,000

2,000

12,000

2,000

2,400

63041

2” Receiver Mount

12,000

7,000

2,400

63042

2-5/16” Receiver Mount

12,000

2,400

Receiver mount tow eyelet 63045 1 Forged Receiver Mount Tow Eyelet, 10,000 lbs. GTW, 7-3/4” Length receiver mount tow hooks 63044 1 Forged Receiver Mount Tow Hook, 10,000 lbs. GTW, 7-3/4” Length Secure ball mount or hitch-mounted accessory with locking head

63047

Receiver Mount Tow Hook, 8,000 lbs. GTW, 7” Length

receiver mount tow ring 63046 1 Receiver Mount Tow Ring, 8,000 lbs. GTW, 7-3/8” Length

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES

Chrome/Stainless balls and shanks Description Chrome Balls & Shanks 3/4” Long Forged 3/4” Reg. Shank 3/4” Long Shank 1” Reg. Shanks 1” Extra Long Shank 1 7/8” Ball 2” Ball 2 5/16” Ball SET: 3/4” Reg. Shank, 1 7/8”& 2” Balls SET: 3/4” Long Shank, 1 7/8” & 2” Balls SET: 1” Reg. Shank, 1 7/8” 2” & 2 5/16” Balls SET: 1” Reg. Shank, 1-7/8” & 2” Balls SET: 1” Reg. Shank, 2” & 2-5/16” Balls SET: 1” Super Long Shank, 1-7/8” & 2” Balls SET: Super Long 1-7/8” & 2” and 2-5/16” Balls SET: 3/4” Forged Shank, 1-7/8” & 2” Balls

Rating

part no. part no.

5,000 Ibs. 3,500 Ibs. 3,500 Ibs. 10,000 Ibs. 10,000 Ibs.

103* 100* 101* 102 105 300 400 600 700* 800* 900 901 904 105L 105T 801*

3,500 Ibs. 3,500 Ibs. 10,000 Ibs. 10,000 Ibs. 10,000 Ibs. 10,000 Ibs. 10,000 Ibs. 5,000 Ibs.

Description Stainless Steel Balls & Shanks 3/4 “ Long Shank 1” Reg. Shank 1” Extra Long Shank 1-7/8” Ball 2” Ball 2-5/16” Ball* SET: 3/4” Long Shank, 1-7/8” & 2” Balls SET: 1” Reg. Shank, 1-7/8” 2” & 2-5/16” Balls SET: 1” Reg. Shank, 1-7/8” & 2” Balls SET: 1” Reg. Shank, 2” & 2-5/16” Balls SET: 1” Super Long Shank, 1-7/8”, 2” & 2-5/16” Balls SET: 1” Super Long Shank, 1-7/8”& 2” Balls

103B* 100B* 101B* 102B 105B 300B 400B 600B 700B* 800B* 900B 901B 904B 105LB 105TB 801B*

part no.

5,000 Ibs 10,000 Ibs 10,000 Ibs

104* 106 107 301 401 601 802* 902 903 906 107T 107L

104B* 106B 107B 301B 401B 601B 802B* 902B 903B 906B 107TB 107LB

5,000 lbs 10,000 lbs 10,000 lbs 10,000 lbs 10,000 lbs 10,000 lbs

*2-5/16” Ball will not fit on 3/4” Shank • Rated Class 4. Rated V-5. Meets SAE Standard J-684 “B” Packaged Product

Description

Rating

004 003

Part No. Part No.

Storage / Accessories 2-ball rack used to store balls. Balls are not included. 3-ball rack used to store balls. Balls are not included. 3-ball plastic box used to store and protect balls with cover. Colors: Grey or Tan.Balls are not included. Shank cover in red, black or grey. Wood display with pieces. Included: 3/4” reg., 3/4” long and 1” stand. Shanks: 1-7/8,” 2” and 2-5/16” chrome balls.

002 003

002B 003B

004

004B

005

005B

0058

100

DB6

1 7/8”

AM-PC SERIES is compatible with PH-1. Fits several aftermarket mounts as well. May be used as drops and risers. Shanks are 2” x 2” tube with 1/4” wall thickness. Hitch pin hole receives standard hitch pins (not included). Use 4 grade 5 1/2” bolts. Be sure they are long enough for mounting purposes. Maximum trailer weight of 10,000 lbs. Maximum tongue weight of 2,000 lbs.

AM-SC-8 AM-SC-6 Cushioned Tow-Hook Cushioned and RH chromed, the new Cushioned TowHook is a versatile work horse. Round out your product line with the Cushioned Tow-Hook... hundreds of agricultural, industrial and recreational uses. Lo 6 1/4” Drop LR2 4 1/4” Drop LR4 2 1/4” Drop

AM-SC-4 ADJUSTABLE

102

105

2”

2 5/16”

5th wheel to gooseneck adapters

Ball mounts

CUSHIONED ROLL-A-HITCH. Telescoping Cushioned hitch extends 7” beyond towing position and swivels 12” left and right for fast, easy hookups anywhere. Just pull forward to lock in center and then back up to lock in towing position. Max trailer weight 10,000 lbs and maximum tongue weight 1000 lbs. per SAE J-684 V-5. Hitch pins included.

101

D86

“B” Packaged Product

AM-SC Series • Acts as a shock absorber • Protects the towing vehicle’s driveline, hitch assembly AM-SC-2 and trailer contents. • Easy to install. • Proven effective in reducing bounce and rhythmic vibrations. • For use with underframe receiver hitch with a 2” square socket. AM-SC-4 • Class 4, V-5 SAFE!

3”

2 1/4”

1 3/4”

AM-SC-4 ADJUSTABLE

AM-PC-1 NON ADJUSTABLE

Cushioned NEW All Cast Body – 20,000 lb. Rated Cushioned 360º • Safety chains standard • Fail safe king pin adapter • Locks with padlock • Available in 12” and 16” sizes with welded body

Cushioned gooseneck 30,000 lb. rated • 4” round pipe • Same cushioning system as C5G CG

NON-Cushioned 7 1/2” Offset 5GX

NON-Cushioned gooseneck with 7 1/2” Offset GX

aftermarket pintle couplers

Hauling made easier and safer Slack Sack™ stores excess webbing in the bag with the ratchet strap at all times, while in use or in storage. Made of durable, water resistant nylon pack cloth.

CHain tugger™ binder Takes up to 20” of slack without disconnecting the chain. 36” total length, hook to hook. Breaking limit of 10,000 lbs. Working load limit 3,335 lbs.

LB201

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES

aftermarket adjustable couplers

Pintle pintle™

The Pintle Pintle™ is a unique solution to the problem of mismatched hitch & trailer couplers. • Simplicity of mounting & towing • High-load capacity designed to meet your towing requirements • Priced to fit your budget

Description

PART NO.

am-ac series & accessories

Description

PART NO.

pintles & accessories

Drop or Riser. Shank is a 2” x 2” tube with 1/4” wall thickness. Hitch pin hole receives a standard 5/8” hitch pin. Maximum trailer weight of 10,000 lbs. with AM-AC-1 max tongue weight of 2,000 lbs. Rated Class 4, V-5 and meets SAE Standard J684. Compatible with Reese and Draw Tight weight distribution hitches.

bolt on pintle hitch w/stainless steel 3 ball combination and pintle sleeve. Has a standard bolt-on pattern for bolting onto a flat surface or one of our cushioned adapters, such as an AM-PC-1 or AM-PC-2. Also AM-AC-1 with PA-1 accessories. Type II-25,000 lbs. gross weight. 5,000 lbs. maximum tongue weight. Meets SAE standard J-847.

PH-1

Ball mount adapter. May be used with the AMAC-1 with 3 1/2” x 3/4” 16-gauge 5 bolts

Pintle Hitch w/chrome plated 3 ball combination and pintle sleeve for use in a standard 2” receiver hitch. The PH-2 is cushioned and will fit the blind hole receivers as well as the regular open receiver. CUSHIONED. Type I-16,000 lbs. gross weight. 800 lbs. maximum tongue weight. Meets SAE standard J-847.

PH-2

PINTLE Hitch w/stainless a 3 ball combination

PH-2S

Pintle hitch with 2” ball for use in a standard 2” receiver. PH-3 is non-cushioned and ball not interchangeable

PH-3

Upgrade factory lights! BA-1

Clevis Pin Adapter. Designed as an agricultural clevis hitch and may also be used as a ball mount. Shank hole is 1” diameter. May be used with AM-AC-1 with 3 1/2” x 3/4”, grade 5 bolts.

CA-1

Pin hitch adapter. Compatible with PH-1. Use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. May be used with AM-AC-1 with 3 1/2” x 3/4”, grade 5 bolts.

PA-1

AM-CC Series are designed as AG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. Hitch pin hole receives a standard 5/8” Ford Super Duty Kit hitch pin. Maximum trailer weight of 10,000 lbs. and AM-CC-1 maximum tongue weight of 1000 lbs. Rated class 4. Rated V-5. Meets SAE standard J-684. For use with open-end receivers. AM-CC Series may be used as ball mounts but are designed as AG hitches. Shanks are 2” x 2” tube with 1/4” wall thickness. Shank hole diameter is 1”. Hitch pin hole receives a standard 5/8” hitch pin. Maximum trailer weight of 10,000 lbs. and maximum tongue weight of 1000 lbs. Rated class 4. Rated V-5. Meets SAE standard J-684. For use with open-end receivers.

GMC Sierra Kit

AM-CC-2

specialty items Swinger Hitch The 00106 Swinger Hitch is cushioned! Acts as a shock absorber, reducing bounce and rhythmic vibrations. 7” right and 7” left for easy hook up. Available in a 2” rise, 0” drop and 4” drop. Maximum Toyota Tundra Kit trailer weight of 7,500 lbs. Maximum tongue weight of 1000 lbs. Rated V-5. Meets SAE standard J-684. Manufacturer’s lifetime warranty for materials and workmanship. Fair wear and tear excluded. Rear ATV Universal Can be used as a 3-way if unit is fastened on with a 3/4” shank, standard trailer ball. A clevis type trailer can be towed by pinning the hitch through the big hole. Large grommeted hole is for ropes/hooks. KWIk Gate™ has hundreds of applications, more importantly, it is not in the way when it is in use.

LAMP KITS Kit PN

03-07 Dodge Ram except Sport

6084

03-08 Hummer H2

AM-AC-1

Pin hitch adapter. Compatible with PH-1. Use 4 grade 5 1/2” x 13 bolts. Be sure they are long enough for mounting purposes. May be used with AM-AC-1 with 3 1/2” x 3/4”, grade 5 bolts.

PA-1

Pintle Sleeve. Fits Convert-A-Ball pintle hitches only. DoesToyota not fit the PH-3FJ Cruiser Kit

Agricultural Clevis Hitch accessory. Pintle Hitch adapter, fits only Convert-A-Ball Ph series hitch bars. Maximum weight of 10,000 lbs. Maximum tongue weight of 1,000 lbs. Class 4 Rated V-5. Not for over the road towing and will not work on a PH-3.

AG-1

Pintles hitch replacement parts

ATF ATR

handle assembly

PH1-002-000

Lock assembly

PH1-003-000

handle spring kit

PH1-004-999

lock assembly

PH2-003-000

safety pin kit

PH1-006-000

Dodge Ram Kit

hitch pin & safety clip

ATVS1 - 1 7/8” ATVS2 - 2”

Adjustable 4 way cushioned ball mount Hummer Kit may be used as a drop or riser. The shank is 2” x 2” tube with 1/4” wall thickness. Hitch pin hole receives standard hitch pins (not included). Maximum trailer weight of 5,000 lbs. Maximum tongue weight of 500 lbs. Rated class 3. Rated V-5. Meets SAE standard J-684. Will fit the blind hole receivers as well as the regular open receiver.

ATVS3 - 1 7/8” 07-08 Toyota FJ Cruiser ATVS4 - 2”

4080 03-06 Chevrolet Silverado WWW.CROFTTRUCKSA.COM 07 Classic only

AM-pin

Upgrade or Add PIAA Quality lights with UM Complete Lamp Kits with Custom Brackets.

Make/Model

5432

5298

Drop or Riser. Shank is a 2” x 2” tube with 1/4” wall thickness. Hitch pin hole receives a standard 5/8” hitch pin. Maximum trailer weight of 10,000 lbs. with max tongue weight of 2,000 lbs. Rated Class 4, V-5 and meets SAE Standard J684. Compatible with Reese and Draw Tight weight distribution hitches.

MOUNTING KITS Kit PN

30360

NON adjustable 4-way cushioned ball mount same features as the UM only Make/Model Non-AdjustableApplication and includes tongue weight indicator

05-07 Ford Super Duty

Mounts PIAA 410 (PN 4152) in factory location.

CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS For more information see www.piaa.com 5452 07-08 Toyota Tundra WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

fifth wheel HITCHEs & WIRING HARNESSES THE FIFTH WHEEL YOU KNOW, BUT BETTER!

CUSTOM QUICK INSTALL BRACKETS & KITS

Features our Signature Series® head, with the base and mounting kit that you already know & love from our Select Series line of fifth wheel hitches! The above bed rail system uses the popular universal mounting kit 30035 (sold separately) or the NEW vehicle specific custom quick install kits which reduce install time by up to fifty percent.

year model chevrolet / GMC 99-07 Classic 1500/2500, 6’ & 8’ Beds 01-07 Classic 3500, 8’ Bed 2007 2500 HD 6’ & 8’ Beds (New Body Style) 2007 3500 HD 6’ & 8’ Beds (New Body Stye) dodge 02-07 1500, 6’ & 8’ Beds (Except Mega Cab) 03-07 2500 HD, 6’& 8’ Beds Exc Mega Cab & Models w/Overload Springs ford 04-07 F-150, 6’ & 8’ Beds (New Body Style), Except Flareside 05-07 F-250/F-350 Super Duty (Except Cab & Chassis toyota 00-06 Tundra Regular Cab & Long Bed

18K Select plus™ fifth wheel Part No. 40261* 40163* 40164*

Description 18K Select Plus SeriesTM TM 18K Select Plus Series w/round tube slider 18K Select Plus SeriesTM w/ square tube slider

Rails and installation kit must be ordered 40164* separately (30035).*Will not fit trucks with beds shorter than 6’ in length & flareside / stepside •18,000 lbs. gross, 4,500 lbs. pin weight capacities •14” to 18” vertical height adjustment •Features Signature Series™ head… - Tough, heavy-duty stamped head looks just like the ones on the real tractor-trailers! - 4 way (front & back/side-toside) head pivot - 6˚ side-to-side head pivot 40163* - Kingpin indicator - Increased kingpin contact design - Wider 9” kingpin funnel area - Forged single jaw - Self-latching jaw design •5 year limited warranty

bkt#

Kit#

note

50041 50041 50041 50041

50041-58 50041-58 50041-58 50041-58

D D D D

50040 50040

50040-58 50040-58

B B

50044 50049

50040-58 50059-58

B D

50059

50059-58

Note: B - No Drill, C - Enlarge one hole, D - Drill one hole • Fifth wheel installation guide (beds need to be at least 6’ long) • Reduces install time by up to 50% • Rail kit 58058 required for brackets • All hardware included

50049

18K Select Plus™ fifth wheel offered w/square tube slider

fifth wheel & GOOSENECK wiring harnesses

UPRATED!

These kits plug into the factory vehicle wiring harness at the back of the truck and reach 7’ into the truck bed to the fifth wheel wiring

FIFTH WHEEL & GOOSENECK TRAILER 90 degree WIRING

40261*

18K Select Plus™ fifth wheel offered w/round tube slider

• Allows for easy hook-up of 5th wheel and gooseneck trailers • Durable connectors • 9 ft. lead reaches almost anywhere • Includes spacer block and mounting hardware

NOW UPRATED!

20134

NEW PRODUCT!

20132

20131

NEW! 18K SelectPlus™ fifth wheel

Towing has never been easier when using the Select Plus Fifth Wheel system.

NEW OFFERING!

20110

FIFTH WHEEL ADAPTER BRACKETS AND HARDWARE

20130

FORMERLY

Installation brackets and hardware for full-size.

58197 58166 58023*

Part No. year Description Dodge (Fifth Wheel Spare Kit) 58166 03-07 Ram 1500/2500/3500 58186 03-07 Ram 2500/3500 w/overload springs 02-07 Ram 1500, 03-07 Ram 58023* 2500 w/o overload Springs toyota (Fifth Wheel SpaRE Kit) 58197 00-06 Tundra 58309 07 Tundra Chevrolet (Fifth Wheel & Gooseneck) 58208 Composite Bed Kit Ford 30080 04-07 F-150 Rails and Installation Kit 58241 04-07 F-150 Fifth Wheel Bracket Kit

UPRATED!

year model harness # chevrolet / GMC 99-06 Silverado/Sierra w/factory 7-way 20110 2007 Classic Silverado/Sierra w/factory 7-way 20110 2007 Silverado/Sierra (New Body Style) 20110 dodge 00-07 Ram, Full Size w/factory 7-way 20111 ford 04-07 F-150 (New Body Style) w/factory 7-way 20110 F-250/350/450/550 Super Duty 20110 99-07 w/factory 7-way toyota 2007 Tundra w/factory 7-way 20113

90 Degree #

NOW UPRATED!

NEW PRODUCT! 58186

NEW!

20134 20134 20134

20223

20132 20134 20134 20113

fifth wheel & GOOSENECK wiring harnesses Part No. qty. Description 20223 1 dsp. pk. 7-way pre-wired U.S. Car Connector-7’ lead 20224 1 dsp.pk. 7-way pre-wired U.S. Car Connector-4’ lead

Note: Will not fit trucks with beds shorter than 6’ in length or flareside / stepside * Bracket kit part no. 58023 recommended when installing on 02-07 Dodge RAM 1500 Pickups

58093

CHAIN BRACKET KIT Part No. Description 50223 Chain Bracket Kit, 18,000 lbs. each

Fits Reese Fifth Wheel Rails and most popular brands. Provides secure attachment for trailer safety chains.

fifth wheel & GOOSENECK extensions NEW OFFERING! Part No. 118666 118664

qty. 1 bulk 1 bulk

Description 6-way Connector-extension cable 7’ 7-way Connector-extension cable 7’

118664

FORMERLYpull pin lock plates

Part No. Description 50223 Pin Lock Plates for 1/2”pull pins for fifth wheels (4 pack)

lock not included

• Prevents theft of fifth wheel and unwanted removal of pull pins • Add a standard padlock to make the locking plate a security device

50223

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

UPRATED!

fifth wheel HITCHES

NOW UPRATED! • Rounded Slide Bar jaw mechanism designed for automatic latching with cushion grip handle • 4-way pivoting head • Skid plate pivots 5° side-to-side for easier hookup on uneven ground and smoother towing • Jaw handle with tab for optional padlock security (padlock not included) • Wide stance one-piece legs for improved stability • Includes 30035 base rail kit • 3 year limited warranty

adjustment Part No. Capacity pin capacity heights pro seriesTM fifth Wheel 30056* 15,000 lbs. 3,750 lbs. 13” tO 17’ Pro SeriesTM Fifth wheel with square tube slider 30076 15,000 lbs. 3,750 lbs. 13” to 17”

30076*

15K

PART NO. DESCRIPTION CAPACITY PIN CAPACITY PRE SERIESTM 25K ABOVE-BED GOOSENECK 49080* 25K Gooseneck Hitch 25,000 lbs. 6,500 lbs. 58208 Chevrolet Composite Bed Kit for gooseneck

*Rail and Installation Kit 30035 must be ordered separately.

• 18,000 lbs. gross / 4,500 pin weight capacities • Improved 4 way head pivot • 4˚ side to side head pivot for better control • 14” – 18” vertical adjustment • Forged single jaw • Increased kingpin/jaw contact design • Self latching jaw design • King pin indicator • Wider footprint for increased stability • Stamped rounded head • Wider 9” (vs 6”) kingpin funnel area on head • Vehicle specific under bed mounting kits • Lockable handle (lock sold separately) • 1/4” turn handle “quick lock” mount system • Non-pin mounting reduces slop • Contemporary 21st century appearance • Folding tab washers for easy installation • 7 year limited warranty • Extended length handle - Pre-assembled fifth wheel units - Saves approximately one hour of assembly time - Foot assembly is hand tightened - Includes wrench to tighten foot assembly - Shipped in one convenient carton

24K Signature Series®

Part No. Description 40847 18K Signature Series® - pre assembled 18K Signature Series® with Slider - pre 40285 assembled 40259 24K Signature Series®

Note: Will not fit trucks with beds shorter than 6’ in length or with flareside/ stepside All 18K features except pre-assembled, plus: • 24,000 lbs. gross / 6,000 pin weight capacities • 14” – 16-1/2” vertical adjustment • Reinforced head • Heavier forged jaw

Part No. 50008

Description Slider Round Tube Kit for 15K & 16K Select Series, plus 18K Select PlusTM fifth wheel hitches

NEW OFFERING! Available in skid quantities of

FORMERLY

Quick-easy installation, strong, reliable performance Featuring side-to-side pivot action to better and easy removal in seconds allows full access to the accommodate hook-ups on uneven ground. Quicktruck bed for maximum versatility. easy installation, strong performance and easy removal in just seconds to allow full access to the truck bed.

6030 6032

6010

Shown with base rails (sold separately) Also available with square tube slider (6031) or round tube slider (40119)

20k SELECT SERIES FIFTH WHEEL 22k SELECT SERIES FIFTH WHEEL 40259

Description 18K Signature Series® Slider, for use with the 18K Signature Series® fifth wheels only

ROUND TUBE SLIDER

NEW! 24 (Example: 49080-024) • Easy installation and removal allows for full access to truck bed • 5 year limited warranty

Available in skid quantities of 18 (Example: 30076-018)

40285

40847

Signature Series SLIDER

Designed for short bed and extended cab short bed pickups to provide additional turning clearance and to prevent damage to truck and trailer in tight locations at low speeds. • 10” Travel • Fits 18K Signature Series® Fifth Wheel • Round rail design allows for smoother operation • Operation from either side of unit (handle can be mounted on either side) • Angled steel rollers reduces binding

15K

30056

NEW PRODUCT!

15K SELECT SERIES FIFTH WHEEL 16K SELECT SERIES FIFTH WHEEL

40270

Available in skid quantities of 16 (Example: 30056-016)

* Will not fit trucks with beds shorter than 6’ in length or flareside / stepside

Pre Assembled 18K With Or Without Slider

Part No.

• 10” travel front to back • Adjustable with trailer attached • Can be used with full size or mini trucks

Features side-to-side pivot to better accommodate Same great features as other fifth wheel hitches, with hook-ups on uneven ground. Quick installation, strong, the capacity to haul the heaviest loads. reliable performance and easy removal to allow full truck bed access.

6021*

Shown with base rails (sold separately) 6022*

40270 • Operates even when vehicle not in straight line • Operation up to 45° angle. • Lock pin for additional security • Rubber grip handle for comfortable operation • The vertical adjustment is limited to 16” - 18”

SQUARE TUBE SLIDER Part No. 30048

Description Slider Square Tube Kit for 15K & 16K Select Series, plus 18K Select PlusTM fifth wheel hitches

Rails And installation kit must be ordered separately (30035). Note: Check clearance between king pin bed and tailgate before moving to maneuvering position • Designed for Pro Series™, 15K & 16K Select • 10” travel fore-and-aft Series models including Select Plus • Works with full size and downsize mini trucks • 12” travel front to back • Fully adjustable with trailer attached • Round tube design allows for smoother • Minimum 13” extended trailer pin box operation recommended 50008 • Operation from either side of unit • Angled steel rollers reduces binding • Operates even when vehicle not in straight line operation up to 45˚ angle Requires 30035 universal base rail kit • Lock pin for additional security (sold separately) • Rubber grip handle for comfortable operation • Tapered holes for easier pull pin engagement • 3” wide attachment allows for use with other fifth wheel hitches • Uses existing base rail design • For use with short box pick-ups. Prevents damage to cab when spotting trailer. Rails and installation kit sold separately, see below. • Minimum 13” extended trailer pin box recommended

NYLON LUBE PLATE Part No. qty. Description 6011 1 10” Lube Plate

• Protects fifth wheel plate from the wear of normal towing • Eliminates the need for messy grease • For use with Select Series™ and Pro Series™ fifth wheels only

6011

Part No. Capacity pin capacity adjustment heights 15K select series fifth wheel (Fore-and-aft pivot) 6030* 15,000 lbs. 3,750 lbs. 12-1/2” to 16-1/2” 13” to 17” w/square 6031* 15,000 lbs. 3,750 lbs. slider unit 16K Select series fifth wheel (Fore-and-aft and side-to-side 4˚-5˚ pivot) 6032* 16,000 lbs. 4,000 lbs. 14-1/2” to 18” 15” to 18” w/square 6033* 16,000 lbs. 4,000 lbs. tube slider 15” to 18” w/round tube 40119* 16,000 lbs. 4,000 lbs. slider 20K select series fifth wheel (Fore-and-aft pivot) 6021* 20,000 lbs. 5,000 lbs. 14-1/4” to 18-1/4” 16K Select series fifth wheel (Fore-and-aft pivot) 6022* 22,000 lbs. 5,500 lbs. 13-1/4” to 17-1/4”

Part No. qty. Description 15K Replacement parts 6040 1 15K Head Service 6041 1 Cross Member Service 6644 1 Fifth Wheel Leg 16K Replacement parts fifth Wheel Hand only 6042 1 16K (service kit) Cross Member - Head 6043 1 Support only Pivot Head Lockout 6010 1 (fits 16K only) 6044 1 Fifth Wheel Leg 20K Replacement parts 6026 1 20K Head Assembly Base Assembly w/adj. 50831 1 20K brackets Rails and * installation kit must be ordered separately (30035). 58187 1 20K Pivot Beam only * Will not fit trucks with beds shorter than 6’ in length or 221K Replacement parts flareside / stepside 6027 1 22K Head Assembly • 5 year limited warranty Base Assembly w/adj. 50831 1 22K brackets

FIFTH WHEEL RAILS & INSTALLATION KIT Part No. Description 30035 Rails & Mounting Bracket Kit for full size trucks 58058 Rails (only) for full size trucks Mounting Brackets and Hardware (only) for full 30439 size trucks

Rails and installation kits for full-size. Quick and easy installation with full truck bed access. * Rail and installation kits must be ordered separately. Does not work with Signature Series® fifth wheel hitches.

30035

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES SAFETY KITS Number 1005 Triangle Kit

Number 1005-B Universal Bracket

Kit of three triangles in high-density plastic case. • Meets or exceeds all applicable DOT standard FMVSS 125 and all state and legal requirements. • Set-up requires no tools. • Precision reflex tooling provides reflectors with high candle power beam for night use. • Fluorescent inner triangle warns daytime traffic. • Self-contained unit needs no power source. • No skid rubber feet keep the triangle in place in high wind. • Placement instructions permanently printed on case and triangle. Master packed in cartons of six. Also available: No. 1005-1 individual carton pak and No. 1005-IB individual triangles. Size: 18.75” long x 5” wide x 4.75” high.

• Universal bracket. Zinc plated, 12 gauge, steel bracket with Nylon straps and steel grip like buckles. • Designed to mount all brands of flare kits. Securely holds flare kit In vertical or horizontal position. Mounting: Two holes for 5/16” screws on 14” center. Master packed in cartons of six. Size: 18.5” long x 1.25” wide x 2” high.

Number 1015 Safety Kit

JAMES KING & CO., INC. Number 1005-B1 Triangle Kit Bracket

• Steel bracket.. Zinc plated. 12 gauge with 14 gauge strap. • Designed to mount James King Model 1005 Triangle Kits. Kit will remain firmly in place in vertical or horizontal position. Cam action fastener provides quick and easy access and re-storage. Mounting: Two holes for 5/16” screws on 14” center. Individually packaged. Size: 18½ “ long x 1.25” wide x 5 ¾” high Approximately.

Number 1005-2 Single Pak

Number 1010 Fleet Kit

Fleet Kit consisting of: • Three warning triangles • One 2.75 lb. 10 B. C. metal head. Fire Extinguisher with bracket mounted to inside of lid. • Three 20-minute fuses. • One hold down strap with hardware. All efficiently organized in a heavy-duty steel carrying case. Size: 21” long x 7.5” wide x 8” high.

Safety Kit consisting of: • Three warning triangles • One 2.75 lb. 10 B.C. Fire Extinguisher with bracket mounted to inside of lid. • Three 20-minute fuses. • All Efficiently organized in a heavy-duty plastic carrying case with handle. • Specify No. 1015-1 for No. 1015 without an extinguisher. Size: 20.5” long x 10.5” wide x 9.5” high.

Single Pak consisting of: • One triangle in reusable “clam shell” plastic case with • Snap on closures. • Case is stackable and suitable for pegboard display. • Ideal for passenger vehicles. Master packed in cartons of 12. Size: 19” long x 5.5” wide x 1.75” high.

The Planet’s Greatest Hitch Guide for Trailer Hitch Alignment THE original hitching rods. Imagine this! Two rods, 4 feet long, with magnetic bases. Put one on the ball. Put one on the front of the trailer. Line them up in your rearview mirror as you back up. When you see the one on the ball move....STOP. Get out and drop the trailer on the hitch! Hitchin’ RodsTM make that a reality. It’s simple. The original Hitching Rods. It works. It’s that easy.

Ready. . . Set. . . Back Up & Go! WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES INTERCHANGEABLE HITCH BALL SYSTEM

Designed to accommodate towing multiple trailers with ease, Tow Ready Interchangeable Hitch Ball System allows you to change hitch ball sizes in seconds without any tools. Available in 2 and 3-ball sets, these kits feature a quick-release, positive-latch design. Available in 3/4” and 1” shank models.

DRAWBAR TYPES

We offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. Refer to the styles below to select the mount that best suits your needs.

Part No. Qty. Shank Ball A Ball B Ball C Max GTW (lbs.) Interchangeable hitch ball system 63801 1 Set 3/4” 1-7/8” 2” 5,000 63802 1 Set 1” 1-7/8” 2” 8,000 63804 1 Set 1” 2” 2-5/16” 8,000 63803 1 Set 1” 1-7/8” 2” 2-5/16” 8,000

• Innovative quick release changes balls in seconds • Rated capacities up to 8,000 lbs. • Durable heat treated shank • New positive latch design • No special tools required

DROP NOT AVAILABLE STYLE 2

STYLE 1 3590

3593

3594

class i drawbar kits STEP 1: ATTACH SHANK STEP 2: attach ball • Attach correct shank to • Select the correct ball size for your trailer drawbar or ball mount • Place ball on shank • Torque to required tightness

STEP 3: tighten locking head • Innovative locking screw requires only 1/4 turn to secure • No need for special tools you’re tow ready!

Part No. Qty. Description Max GTW (lbs.) replacement parts 63805 1 1-7/8” Interchangeable Hitch Ball Head 63806 1 2” Interchangeable Hitch Ball Head 63807 1 2-5/16” Interchangeable Hitch Ball Head 63808 1 3/4” Interchangeable Hitch Ball Shank 5,000 63809 1 1” Interchangeable Hitch Ball Shank 8,000

All hitch balls built with wrench flats

Ball Dia. A

63826-006

Finish Zinc

Chrome

Drawbar GTW Shank Shank Thickness GVWR Dia. B Length C Range Rating

bulk hitch balls * 1-7/8” 63811 63810 3/4” 1-1/2” 1-7/8” 63813 63812 3/4” 2-3/8” 1-7/8” 63814 3/4” 3-3/8” 1-7/8” 63817 63816 1” 2-1/8” 1-7/8” 63819 63818 1” 3-3/8” 2” 63821 63820 3/4” 1-1/2” 2” 63823 63822 3/4” 2-3/8” 2” 63824 3/4” 3-3/8” 2” 63827 63826 1” 2-1/8” 2” 63829 63828 1” 3-3/8” 2” 63831 63830 1-1/4” 2-3/4” 2-5/16” 63833 63832 1” 2-1/8” 2-5/16” 63835 63834 1-1/4” 2-3/4” 2-5/16” 63836# 1-1/4” 2-3/4” 2-5/16” 63838# 1-1/4” 2-3/4” Packaged hitch balls 1-7/8” 63881 63880 3/4” 1-1/2” 1-7/8” 63882 3/4” 2-3/8” 1-7/8” 63885 63884 1” 2-1/8” 2” 63888 63887 3/4” 1-1/2” 2” 63889 3/4” 2-3/8” 2” 63892 63891 1” 2-1/8” 2-5/16” 63895 63894 1” 2-1/8” 2-5/16” 63897 63896 1-1/4” 2-3/4” Packaged hitch balls (6 pack retail display) 1-7/8” 63810-006 3/4” 1-1/2” 1-7/8” 63816-006 1” 2-1/8” 2” 63826-006 1” 2-1/8” 2-5/16” 63832-006 1” 2-1/8” Packaged Stainless Steel Hitch Balls 1-7/8” Stainless 63851 1” 2-1/8” 2” Steel 63852 1” 2-1/8” 2-5/16” Finish 63853 1” 2-1/8”

3/8”-5/8” 2,000 3/8”-1-3/8” 2,000 3/8”-2-1/8” 2,000 3/8”-3/4” 2,000 3/8”-2-1/8” 2,000 3/8”-5/8” 3,500 3/8”-1-3/8” 3,500 3/8”-2-1/8” 3,500 3/8”-3/4” 6,000 3/8”-2-1/8” 6,000 3/8”-1” 8,000 3/8”-3/4” 6,000 3/8”-1” 12,000 3/8”-1” 14,000 3/8”-1” 17,000 3/8”-5/8” 2,000 3/8”-1-3/8” 2,000 3/8”-3/4” 2,000 3/8”-5/8” 3,500 3/8”-1-3/8” 3,500 3/8”-3/4” 6,000 3/8”-3/4” 6,000 3/8”-1” 12,000 3/8”-5/8” 3/8”-3/4” 3/8”-3/4” 3/8”-3/4”

2,000 2,000 6,000 6,000

3/8”-3/4” 3/8”-3/4” 3/8”-3/4”

2,000 6,000 6,000

* Ultra Frame or Titan receiver and ball mount must be used to achieve 14,000 lbs. rating. Consult tow vehicle owners manual for maximum towing capacities.

63851

63880

Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5 • Cold forged for superior strength • When installing hitch balls, torgue all 3/4” shank dia. (B) balls to 160 ft. lbs., 1” shank dia. (B) balls to 250 ft. lbs., and 1-1/4” shank dia (B) balls to 450 ft. lbs.

STYLE 3

• Boxs includes drawbar, pin and clip • Black powder coat finish

Part No. Rating (lbs.) GTW/TW Ball Hole Size A LENGTH B Rise C Drop Style 3590 2,000/200 3/4” 6-5/8” 5/8” N/A 1 3591 2,000/200 3/4” 9-3/4” 5/8” N/A 1 3592 2,000/200 3/4” 9-3/4” 2-1/8” 2-3/4” 2 3593 2,000/200 3/4” 6-5/8” 2-1/8” 2-3/4” 3 3594 2,000/200 3/4” 10” 4” N/A 2

NOTE: Class I drawbar applications are specific. The correct replacement drawbar part number is listed on each Class I hitch installation instruction sheet.

36051

36063

™

36071

class ii drawbar kits

• Boxs includes drawbar, pin and clip • Black powder coat finish

Part No. Rating (lbs.) GTW/TW Ball Hole Size 36051 3,500/300 3/4” 36053 3,500/300 3/4” 36061 3,500/300 3/4” 36063 3,500/300 3/4” 36065 3,500/300 3/4” 36071 3,500/300 3/4” 36078* 3,500/300 3/4”

A LENGTH 7” 9-3/4” 9-3/4” 11-3/4” 10” 7-3/16” 7-3/8”

B Rise 5/8” 5/8” 3-1/8” 3-1/8” 5” 2-5/8” -

C Drop 1-1/4” 1-1/4” N/A N/A N/A 3-1/4” 4-3/4”

Style 1 1 2 2 2 3 3

* Fits 1-1/4” OEM Ford Explorer, Lincoln Aviator & Mercury Mountaineer hitch NOTE: Class II drawbar applications are specific. The correct replacement drawbar part number is listed on each Class II hitch installation instruction sheet. Part No. Qty. Description Drawbar oem kits Magnum hitch, 2,000 lbs. 83637 1 Dodge (includes pin and clip) invisi-hitch accessories Kit, 2,000 lbs. 28451 1 Drawbar (includes swivel pin) Adapter Kit 28351 1 Accessory (Includes swivel pin)

28451 83637

28351

SPECIALTY BALL MOUNTS Part No. Description Rating (Lbs.) GTW/TW Length Max. rise Max. Drop quick release adjustable ball mount (quick release pin and clip) 6580 Complete Shank and Head Assembly 6,000/600 12” 6-1/8” 7-3/8” adjustable ball mount 1420 Complete Shank and Head Assembly 5,000/500 12” 6” 7-1/4” 1422 Complete Shank and Head Assembly 5,000/500 14” 6” 7-1/4” 1424 Complete Shank and Head Assembly 5,000/500 16” 6” 7-1/4” adjustable ball mount with sway control tab (Platform mounts for left or right hand) 7390 Complete Shank and Head Assembly 6,000/600 12” 3-3/4” 5-1/4”

Adjustable ball mounts are perfect for those who tow multiple trailers of varying coupler heights. • Shank can be used in rise or drop position • Black powder coat finish NOTE: Hitch ball, pin (55010) and clip (55515) sold separately. Not interchangeable with weight distribution replacement parts

6580 1420 1422

7390

1424

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES BALL MOUNTS

INTERLOCK™ HITCH BALLS & BALL MOUNTS one wrench tightening system Interlock™ balls and ball mounts act as a “One Wrench Tightening System” when used together. Standard hitch balls and ball mounts may also be used with Interlock™ products but require two wrenches for installation. 62342

• Interlock™ solid steel hitch balls are engineered to meet all safety requirements of VESC regulation V-5. 40792

40381 • Solid onepiece forged construction • 1” thick x 3” wide ball platforms • Angled, easy-load design

40172

No more scratched or marred hitch balls

Part No. ball dia. shank Dia. shank length Chrome interlocktm hitch balls 62807 1-7/8” 1” 2” 62803 2” 1” 2” 62806 2-5/16” 1” 2” Tm Stainless steel interlock hitch balls 63842 1-7/8” 1” 2” 63843 2” 1” 2” 63844 2-5/16 1” 2” Tm class iii interlock ball mounts 40792 1” 9” 2” 40793 1” 9-1/2” 3-1/4 40794 1” 10” 5-1/4

Lift

Capacity (lbs.)

Standard Standard Standard

2,000 lbs. 6,000 lbs. 6,000 lbs.

Standard Standard Standard

2,000 lbs. 6,000 lbs. 6,000 lbs.

3/4” 2” 2”

6,000/600 5,000/500 5,000/500

40331

40384

• When installing Interlock™ hitch balls, torque all 1” shank balls to 250 ft. lbs.

63842 62807

40332

40330

40382

Part No. Qty. description hitch ball wrench Hitch Ball boxed 62342 1 Wrench, end 1-1/8” & 1-1/2”

• 2” receiver 40176 opening • Brushed stainless steel ball mount (Draw-Tite & Reese) • Polished stainless steel ball mount (Hidden Hitch) • Resists rust and corrosion • Available in 2” and 3-1/4” drops with same angle cut as quickloading ball mounts

STYLE 3

STYLE 1

4282 4280

62342

Part RATING (LBS.) BALL HOLE A B No. GTW/TW SIZE length RISE C DROP style SOLID FORGED BALL MOUNTS (BLACK POWDER COAT FINISH) 40330 12,000/1,200 1-1/4” 8-1/2” 1” 2” 40331 12,000/1,200 1-1/4” 9-1/4” 3” 4” 40332 12,000/1,200 1-1/4” 10-1/4” 5” 6” ALUMINUM SOLID FORGED BALL MOUNTS (ALUMINUM FINISH) 40381 8,000/800 1” 9-7/8” 1” 2” 40382 8,000/800 1” 10-5/8” 3” 4” 40383 8,000/800 1” 11-7/8” 5” 6” 40384 6,000/600 1” 10-7/8” 7” 8” STAINLESS STEEL BALL MOUNTS 40172 6,000/600 1” 9” 3/4” 2” 40176 6,000/600 1” 9-1/2” 2” 3-1/4” CLASS IV ULTRA FRAME HOLLOW SHANK BALL MOUNTS (BLACK POWDER COAT FINISH) 40200 10,000/1,000 1-1/4” 8-1/2” 3/4” 2” 1 40201 10,000/1,000 1-1/4” 9” 2-3/4” 4” 3 40202 10,000/1,000 1-1/4” 11-1/4” 2-3/4” 4” 3 40205 10,000/1,000 1-1/4” 9” 6” 3 40206 10,000/1,000 1-1/4” 9” 8” 3 CLASS IV ULTRA FRAME SOLID SHANK BALL MOUNTS (DURABLE ZINC COATED FINISH) 4280 12.000/1,200 1-1/4” 8-1/2” 1” 2” 1 4284 12,000/1,200 1-1/4” 12” 1” 2” 1 4081 12,000/1,200 1-1/4” 8-1/2” 3” 4” 3 4285 12,000/1,200 1-1/4” 12” 3” 4” 3 4282 12,000/1,200 1-1/4” 9-1/2”” 5” 6” 3 4283 12,000/1,200 1-1/4” 9-1/2” 7” 8” 3

selecting the proper ball mount: ball mount measurements TOWING STARTER KITS length Distance from the center of the ball hole to the center of the pin hole

rise Distance from the top of the shank to the top of the ball platform rise

40349

drop Distance from the top of the shank to the top of the ball platform

• 2” square solid shanks • 1-7/8” and 2” hitch ball interchangeable hitch ball system • 1” shank • Standard ball mount: 8-1/2” length, 3/4” rise, 2” drop • Includes pin and clip • Black powder coat finish

drop

length

40563-002 40443

2923

(LBS.) A c ball secure Part No. RATING GTW/TW length drop size Class iii standard towing starter kits (2-pack) 40563-002 6,000/600 8-1/2” 2” 2” Pin/Clip 40564-002 2,000/600 8-1/2” 2” 1-7/8” Pin/Chip 40566-002 6,000/600 9” 4” 2” Pin/Clip

• Point of purchase retail display • Two kits per display box • 2” square box opening

BALL MOUNTS

STYLE 3 DROP CUT: 2736

STYLE 2 angle CUT:

Part No. description Towing starter kits 40349 Towing Starter Kit, 6,000 GTW rating

40342

Part BULK PART RATING (LBS.) BALL HOLE A B C No. NO. GTW/TW SIZE length RISE DROP style MAX FRAME MOUNT KITS - CLASS III/IV (2” BALL MOUNT) 2923 6,000/600 1” 8-1/2 3/4” 2” 2 2953 6,000/600 1” 9” 2-3/4” 4” 2 EASY LOAD BALL MOUNTS (2” x 2” shank & angle cut design) *40342 40342-006 6,000/600 1” 8-1/2” 3/4” 2” 2 *40343 40343-006 6,000/600 1“ 10-1/2” 3/4” 2” 2 *40344 40344-006 6,000/600 1” 9” 2-3/4” 4” 2 *40345 40345-006 6,000/600 1” 11” 2-3/4” 4” 2 *40346 40346-002 6,000/600 1” 9-3/4” 4-3/4” 6” 2 UTILITY BALL MOUNTS (2” Ball mount & bulk boxed) *2736 2736-006 5,000/500 1” 12” 3/4” 2” 1 *2793 2793-002 5,000/500 1” 10” 6-3/4” 8” 3 *2706 3,500/350 1” 9” 9-3/4” 3 5,000/500 1” 9” 11 PACKAGED ANGLED CUT BALL MOUNTS (2” BALL MOUNT) 40446 6.000/600 1” 10-1/2” 3/4” 2” 2 40445 6.000/600 1” 11” 2-3/4” 4” 2 40446 6.000/600 1” 9-3/4” 4-3/4” 6” 2

Note: * pin and clip not included

• Includes pin and clip • Black powder coat finish

Part No. RATING (LBS.) GTW/TW A length B rise c drop secure Class iii interlock towing starter kits 40565 6,000/600 8-1/2” 3/4” 2” Lock

Part no. QTY. DESCRIPTION Clevis & ball mount combo Length, 63037 1 8-1/2” 6,000 GTW

Ball mount Clevis mount length Part no. Description gtw/tw (lbs.) gtw/tw (lbs.) Clevis mounts 3,500/350 5,000/350 9-3/4” 5761 3/4””hole 5762 1” hole 80410* 1” hole 6201 1” hole

63037 • Includes 2” hitch ball, pin & clip • For use with industrial/ agricultural equipment

• Includes 2” hitch ball • Includes receiver lock • Black powder coat finish

6,000/600

8-7/8” 11”

6,000/600

10,000/1,000

8-7/8”

5763

3/4” dia.

4-1/4”

5764

1” dia.

4-3/4”

* Ball Mount has 1-1/4” drop, Clevis has 3” drop

5762

80410

5761

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

HITCH ACCESSORIES reversible ball mounts

80404 80405

PINTLE HOOKS & ACCESSORIES

80401

80402

80403

80407

80406 • Weight rating as per ball being used • 2” square hollow shank, rated up to 6,000 lbs. GTW/600 lbs. TW

80408

80415

Part No. description RATING (LBS.) GTW/TW Shank length ball size rise or drop 2-ball hollow shank Ball Mount, Black 2,000/200 Rise 80404 2-Ball 1-7/8” 2” Hollow Shank 6,000/600 Drop 2-Ball Ball Mount, Black 2,000/200 Drop 80405 Hollow Shank 1-7/8” 2” 6,000/600 Rise Ball Mount, Black 6,000/600 2” Drop 80406 2-Ball Hollow Shank 6,000/600 2-5/16” Rise 2-ball solid shank Ball Mount, Black 2,000/200 8” 1-7/8” 80401 2-Ball Solid Shank 6,000/600 8” 2” 2-Ball Ball Mount, Chrome 6,000/600 8” 2” 80402 Balls, Black, Solid Shank 10,000/1,000 8” 2-5/16” 2-Ball Ball Mount, Black 2,000/600 8” 1-7/8” 80403 Solid Shank 6,000/600 8” 2” Ball Mount, Chrome 6,000/600 8” 2” 80407 2-Ball Balls, Black, Solid Shank 10,000/1,000 8” 2-5/16” 3-ball solid shank 2,000/200 8” 1-7/8” Ball Mount Black 80408 3-Ball 6,000/600 8” 2” Solid Shank & Balls 10,000/1,000 6-3/4” 2-5/16” 2,000/200 8” 1-7/8” Ball Mount, Chrome 80415 3-Ball 6,000/600 8” 2” Balls, Black Solid Shank 10,000/1,000 6-3/4” 2-5/16” Part No. qty. description Bumper guard, “the hitch guide-and-stop” 80400 1 Black 80470 1 Diamond Plate

• Protects vehicle from coupler impact while backing up •Mounts to any ball mount with 1” hole •Mounting surface must be flat

80470

80400

7627 6352 • Conveniently stores

interchangeable and Part No. qty. description removable hitch balls when not in use hitch ball & ball mount bags • Features a hook and loop closure to secure ball and 7627 1 (ball mount not included) keep vehicle clean 6352 1 (ball not included) • Durable nylon design provides years of use

HITCH ACCESSORIES

80301

80304 80303

• Ideal for cargo carriers & bike carriers • Designed to extend the receiver opening from 6” to 18” • Use of this adapter reduces hitches’ tow rating by 50% & with a maximum rating of 3,500 lbs towing capacity

• Converts receivers for use with pintletype trailers, quickly and easily • Provides mounting for both ball and pintle and rigid type pintle hooks • Pin and clip must be ordered separately

63058 63059

*Titan pintle hook adapter mount

(lbs.) Part No. Shank rating Gtw/tw receiver extensions 63056 Hollow 6,000/600 63057 Solid 12,000/1,200 63058 Solid 8,000/800 63059 Solid 12,000/1,200 45156* Hollow 12,000/1,200

shank length Shank a b Dia. / h

height width c d

hole e

width height hole f g sets

7-5/8” 7-5/8” 11-3/8” 11-3/8” 7-3/4”

5-1/2” 7-1/2” 12-1/2” 7-1/2” 6”

17/32” 17/32” 17/32” 17/32” 17/32”

3-3/8” 3-3/8” 3-3/8” 3-3/8” 3-3/8”

3” 3-1/4” 3-1/4” 3-1/4” 3-1/4”

2” 2” 2” 2” 2-1/2”

5” 5” 5” 5” 5”

63032

Part No. qty. description receiver adapters to 1-1/4”, 7” long, 80300 1 2” 3,500 lbs. 2” to 1-1/4”, 14” long, 80301 1 3,500 lbs. 2” to 1-1/4”, 18” long, 80302 1 3,500 lbs. to 2”, 6” long, for 80303 1 1-1/4” Class ll only; 3,500 lbs. 1-1/4” to 2”, 6”, 10” long, 80304 1 for Class ll only; 3,500 lbs.

1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4”

3 4 7 4 3

63020

Part No. QTY. DESCRIPTION PINTLE HOOKS (includes mounting hardware) 63013 1 5 Ton, 2,000 lbs. max. vertical load, 10,000 lbs. GTW 63014 1 10 Ton, 4,000 lbs. max. vertical load, 20,000 lbs. GTW 63015 1 15 Ton, 6,000 lbs. max. vertical load, 30,000 lbs. GTW 63016 1 30 Ton, 14,000 lbs. max. vertical load, 60,000 lbs. GTW 63032 1 Replacement Hardware Mounting Kit Pintle hook combination hitches (includes mounting hardware) 63010 1 1-7/8” Combo Hitch, 16,000 lbs. GTW, ball rating 6,000 lbs. 63011 1 2” Combo Hitch, 16,000 lbs. GTW, ball rating 10,000 lbs. 63012 1 2-5/16” Combo Hitch, 16,000 lbs. GTW, ball rating 14,000 lbs. 63032 1 Replacement Hardware Mounting Kit Replacement Parts 63017 1 1-7/8”” Replacement Ball, 6,000 lbs., 1-1/4” diameter 63018 1 2” Replacement Ball, 10,000 lbs., 1-1/4’ diameter 63018 1 2-5/16” Replacement Ball, 14,000 lbs., 1-1/4” diameter 63020 1 Replacement Snapper Pin 43031 1 5/16” Safety Pin 63032 1 Replacement Hardware Mounting kit

63010 63011 63012

UPRATED!

NOW UPRATED!

63013 63014 63015 63016

NEW PRODUCT! 63017 63018 63019

NEW! NEW OFFERING! 45292

80300

80302

63057

63056

80306

Part No. description. WC (lbs.) WD (lbs.) Length • Ideal for slide-out campers with extended overhangs receiver extensions • Designed to extend the receiver opening 14”, 80307 Receiver Extension 3,500 8” 18”, 24”, 34”, 41” or 48” 80305 Receiver Extension 3,500 14” • 2” opening for use with standard ball mounts 80306 Receiver Extension 3,500 18” and hitch-mounted accessories TM Receiver 6,000 8,000 24” 45292 Titan • For use with receivers only Extension 4,500 6,000 34” TM • Integrated electrical bracket attached 5,000 7,500 41” 45018 Titan Receiver Extension 4,000 6,000 48”

FORMERLY

lunette rings

• Allows Class II balls (3/4” shank) to be used in Class III ball mounts (1” hole) - applies to 80100 • Allows Class III balls (1” shank) to be used in Class IV ball mounts (1-1/4” hole) - applies to 80106

Part No. QTY.

28023

Part No. QTY. DESCRIPTION REDUCER BUSHING 80100 1 1” OD to 3/4” ID 80106 1 1-1/4” OD to 1” ID

63023 63021

63022

28023

4210

63023

63033

63022

63021

DESCRIPTION Lunette Ring Lock (fits 2-1/2” & 3” diameter lunette rings) Lunette Ring Lock Lunette Ring, 2-1/2” diameter with 4 hole base 42,000 lbs. GTW Hardware Mounting Kit for 63023 Lunette Ring, 2-1/2” diameter with 1-1/2” shank 15,000 lbs. GTW Adjustable Lunette Ring, 3” diameter w/channel 12,000 lbs. GTW

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

Trailer Accessories

TRAILER COUPLERS

Bulk Bulkball size Channel Width -Zinc Primed Class : up to 2,000 lbs. 1-7/8” 2” 21127 1-7/8” 2-1/2” 21227 -

Our couplers are of the highest quality steel construction, featuring: • Adjustable lock nut for proper ball tension • Locking hole in coupler handle • Positive locking trigger To select the correct coupler: • Choose the ball size that best matches the trailer weight. • Choose the channel width and style that matches the trailer tongue. • Select the corresponding coupler from the chart below

1-7/8”

A-FRAME STYLE

STRAIGHT TONGUE STYLE

3”

21327

Class iii: up to 3,500 lbs. 2” 2” 21128 2” 2-1/2” 21228 2” 3” 62200

Class iii: up to 5,000 lbs. 2 to 2-1/8” 2-7/8” 2” A-Frame -

2863 23305

Class iV: up to 10,000 lbs. 2-5/16” A-Frame -

21010 21011 21012

24305

21000 21001 21002

BULLDOG® A-FRAME STYLE COUPLER Part qty. no. 21010

21011

21012

BULLDOG® CHANNEL-STYLE COUPLER Part no. qty.

Description Bulldog® A-Frame Coupler for 2” ball 50 degree A-frame 5,000 lbs.; high profile latch - Bulldog® part #028384 Bulldog® A-Frame Coupler for 2” ball 50 degree A-frame 7,000 lbs.; high profile latch - Bulldog® part #028386 Bulldog® A-Frame Coupler for 2-5/16” ball 50 degree A-frame 12,500 lbs.; high profile latch - Bulldog® part #028463

21000

21001

21002

Fulton trailer winches • Heavy duty reinforced frames T1500Z0101 maintain proper gear alignment • Zinc plated finish for superior corrosion resistance • Comfort grip handle provides a positive hold while cranking Part no. T1500Z0101

qty. Description Winch with 20’ strap and 1 hook; 1,500 lbs. capacity, 4.1:1 gear ratio

UPRATED!

Tire Chock & Tongue Jack Caster Wheel NOW Dock UPRATED! Combo

NEW PRODUCT! • Complete trailer docking system • Made from high impact polymer • Mounting holes provided to secure to solid surface • Reduces the risk of trailer roll • Fits most trailer wheels

NEW!

NEW

Part no. qty. Description I Coupler 26127 1 Class Repair Kit Class Coupler 26228 1 RepairIIKit Repair Kit 2459 1 #2863 for

26127 UPRATED! 26228

FORMERLY

NEW PRODUCT!

52000

NEW! levelall

NEW FFERING! • ForOuse on all trailer types

5570

FORMERLY

Part no. qty.

5570 5571 63024 63025 63026 63027 63028

5571

52060

Description

1 Tie-Down Ring, recessed 5000 lbs capacity 1 Light Duty Tie-Down Ring, recessed D Ring yellow zinc, 1/2” forged D-ring w/mounting 1 Forged bracket, measures 2-1/2” x 2-3/8” ID Forged Lashing Ring 18,000 lbs. 3/8”, c-1045 material 5/8” forged 1 D-ring w/ weld mounting bracket Forged Lashing Ring 26,500 lbs, 3/8” thick , c-1045 material 3/4” 1 forged D-ring w/ weld mounting brakcet 1 1” Forged D-ring w/weld on mounting bracket, 3/8” thick 1x5x6 Forged Lashing Ring 46,760 lbs. c-1045 material 5/8” 1 forged D-ring w/weld mounting bracket

63024 63026 63027 63028 WORK LOAD (LBS.)

MAX LOAD (LBS.)

4,000

12,000

6,000

18,000

8,833

26,500

15,587

46,760

15,587

46,760

pickup tire carrier (inside bed)

• Coated with epoxy, electro-static paint that is highly resistant to impact or scratches • Padlock feature secures the wheel against theft (padlock not included) • Black powder coat finish

Can be used with 14” through 16.5” wheel sizes with 7” maximum rim width. Will not fit imports and some models of small pickups

Dead-Bolt Coupler Lock, 1/2” span Dead-Bolt Coupler Lock, 2” span

63222

63225

Coupler Lock, 2-3/8” span Coupler Lock, fits coupler w/positive locking trigger Universal Coupler Lock

63226

1 1

Coupler Lock, 2-5/16” ball

63228

Coupler Lock, 2” ball

NEW OFFERING! NEW OFFERING! FORMERLY FORMERLY 63218

63229

Coupler Lock, 1-7/8”

63230

Brass Adjustable Coupler Lock

63219

63211

63213 63220

Combo Lock Set for 2” rec.

63226 63225 63229

63219

1240

Part no. 63034

Max GTW 2,000

63035

5,000

qty. Description 1 6 ft. Class I - S-Hooks on both ends (1pc) 1

63035

6 ft. Class III - Quick Links on both ends (1pc)

safety chain KIT (bulk packaged) Max GTW qty.

5591

2,000

5592

3,500

2489

5,000

Description 4 ft. Class I - 3⁄16” proof coil chain. Use with Quick Link part #74701 only, sold separately 6 ft. Class II - 1⁄4” proof coil chain. Use with Quick Link part #74701 only, sold separately 30 inch Class III - Straight Link Machine Chain. Use with Quick Link part #74700 only, sold separately

5591 5592

quick links (bulk packaged) 74701

3.500

74700

5,000

Replacement Plastic Cover for Levelall

63024

Part no. qty. Description 1240 1 Universal application for 1960-1998 domestic pickups

1 1

Part no. Max GTW qty.

Part no. qty. Description 1 Levelall 52000

Forged d-rings, forged lashing rings & brackets 63025

63220

63227

NEW!

QTY. Description 1 Coupler Lock, 3-3/8”

63221

Part no.

NOW UPRATED!

Part no. qty. Description 63450 1 Tire Chock & Tongue Jack Caster & Wheel Dock Combo

NOW UPRATED!NOW UPRATED! • Strong, 2-piece stainless steel design • Locks lug bolt opening • Adjustable design fits rim thickness from 1/4” to 7/8”PRODUCT! NEW NEW PRODUCT!

trailer locks Part no. 63213

4324

UPRATED! UPRATED!

coupler repair KIT safety chain KIT

• Level indicators from front to back and side to side

63450 OFFERING!

Part no. qty. Description 4324 1 Stainless Steel Tire lock

Combo locks (hitch & Trailer) 63218 1 Combo Lock Set for 1-1/4” rec.

Description Bulldog® Straight Channel Coupler for 2” ball w/ 3” square channel 5,000 lbs.; high profile latch Bulldog® part #028382 Bulldog® Straight Channel Coupler for 2” ball with 3” square channel 7,000 lbs.; high profile latch Bulldog® part #028387 Bulldog® Straight Channel Coupler for 2-5/16” ball w/3” square channel 12,500 lbs.; high profile latch Bulldog® part #028462 TM

adjustable spare tire lock

Description 1⁄4” Quick Link, fits 3⁄16” or 1⁄4” chain. Use to connect Safety Chain part #5591 or 5592 to tow vehicle or trailer, to repair broken link or add link 5⁄16” Quick Link, fits 5⁄16” chain. Use to connect Safety Chain part #2489 to tow vehicle or trailer, to repair broken link or add link

74700

74701

tow hooks (bulk packaged) Part no.

Max GTW ( lbs.)

63029

10,000

63030

10,000

UPRATED!

qty.

Description

Tow Hook with mounting bolts (chrome)

Tow Hook with mounting bolts (black)

63029

63030

NOW UPRATED!

NEW PRODUCT! tow ready jacks Part no. qty. 63413

63407

63409

NEW!

Description Side Wind, Marine Swivel Jack, 1,000 lbs. capacity, 10” travel, zinc; mfg. part #EJ1000 Top Wind. A-Frame, 2,000 lbs. capacity, 14” travel, painted; mfg. part #EA2000 Side Wind. A-Frame, 2,000 lbs. capacity, 14” travel, painted; mfg. part #RV2000

63413

63407

NEW OFFERING!

FORMERLY

63409

WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS