T & S Machine

BLOCKMASTER CNC BLOCK MACHINING SYSTEM

Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks. Since you just decked it, go ahead and O-Ring the deck since we have the operation saved. We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining! Anyone with engine building knowledge can run the TS1000 after a couple of days with the included factory training in your shop!

940-668-1002 12 Whitleys Ridge Lane Gainesville, TX 76240 facebook.com/TnSMachinesAndTools

PB500

DELUXE CRANKSHAFT BALANCER

You might ask, “Maybe there is a better system out there?” We don’t believe so! ProBal has invested heavily in building the quickest, most sensitive, and accurate balancing system available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual results achieved. A more sophisticated balancing software does not exist, and we can prove it.

We utilize the latest technology in our machines including Super-Smooth Linear Rail for both the columns and the drill unit. There is no other machine that is as easy to adjust as the PB500. Slide the columns into position with 1 finger!

All necessary accessories are included with the machine plus a calibration rotor so that you can verify the accuracy of the machine at any time. We do this all for less than any of our competitors manufacture all our products right here in the Republic of Texas!

Have an older machine? Call ProBal Dynamic Balancing for options to upgrade! Several computer solutions are available from simple laptops to full 22” TouchScreen Industrial consoles. On-Site Installation and Training is also available to get you up and running as quickly as possible!

940-668-1126