October 2012 by The Trader's Dispatch

OCTOBER 2012

Vol. XIII No. 9 P.O. Box 306 Valier, MT 59486-0306

Phone 406-279-3291 Fax 406-279-3249 website: tradersdispatch.com E-MAIL: trader@3rivers.net

Nebraska Youth Beef Leadership Symposium The Nebraska Youth Beef Leadership Symposium (NYBLS) at the University of Nebraska-Lincoln (UNL) will offer two sessions this year in order to reach high school students earlier -- one for freshman and sophomores and another for juniors and seniors.  “This educational symposium will allow students to network with beef industry leaders and hear about innovative cattle production practices,” said Dennis Brink, UNL animal science professor. The first session November 2-3 will be geared toward freshman and sophomores and will give them an introduction to the beef industry – an overview, interaction with faculty about current research, meat science, beef quality assurance, marketing and an introduction to careers. They will also have an opportunity to work on a team project and do an infomercial about beef and the benefits of it in the diet.   Concluding on November 3, freshman and sophomores will attend a career panel and banquet along with the juniors and seniors who have just arrived for their session. Students will be able to meet with industry sponsors. The November 3-5 session will be geared toward juniors and seniors and will follow the traditional route of NYBLS continued on page a2

UPCOMING AUCTIONS

Oct. 10, Big Iron, Online.....................................................................................A16 Oct. 12, Toavs Premier Auctions, Hay Auction & Consignment, Wolf Point.....A3 Oct. 13, Austin Auctions, Osen House & Estate, Glasgow................................A4 Oct. 13, GSI Auction Service, Westland Estate, Fraser......................................A6 Oct. 13, Smith Sales Co., Westmoreland Mining Surplus, Colstrip..................A2 Oct. 14, Jim Ellis Auctioneer, Antiques, Bits & Spurs & Power Equipment, Victor...................................................................................................................A11 Oct. 14, RK Statewide Auction, Murdock Moving, Sidney...............................A18 Oct. 16, Rivers West Auction, Bonavia Farms, Ronan....TIME CHANGE........A12 Oct. 17, Big Iron, Online.....................................................................................A16 Oct. 19, Larry & Eva Olson Auction Co., Wes Koss Hunting Real Estate, Malta. . ......................................................................................................................A11 Oct. 20, Weaver’s Auction Service, Weaver Retirement, Baker.......................A19 Oct. 20, Hi Line Auction, Bigham Real Estate & Equipment, Dodson............A20 Oct. 20, Montana Auction Company, Inc., Consignment, Circle.......................A7 Oct. 20, RK Statewide Auction, Eve Estate, Forsyth........................................A30 Oct. 24, Big Iron, Online.....................................................................................A16 Oct. 27, B&B Auction Sales & Service, Fall Auction, Havre............................A36 Oct. 27, Shobe Auction & Realty, Gill Ranch Equipment & Fall Open Consignment, Lewistown...........................................................................................A33 Oct. 27, RK Statewide Auction, Lamb Estate, Miles City.................................A37 Oct. 28, RK Statewide Auction, Anderson Moving Auction, Fallon................A18 Oct. 29, Click4Iron.com, Online.........................................................................A22 Oct. 30, Rivers West Auction, Evans Estate, Ronan........................................A12 Nov. 1, Rivers West Auction, Industrial Services Co. Retirement, Missoula..A27 Nov. 10, Bo Carpenter Auction, Inc., Olstad Estate, Kalispell...........................A9

MSU to hold agriculture conference

MSU Extension and the Department of Agricultural Economics and Economics will offer a conference entitled “Agriculture 2012: A Changing Landscape” from 8:30 a.m. to 1:30 p.m. on October 26 in Bozeman, Montana. The conference will provide agricultural business leaders, bankers, producers, and others in agriculture with information from experts on agricultural policy, livestock and grain markets, and the Montana economy, addressing current issues facing Montana agricultural producers. The speakers include: George Haynes on the status of Montana and U.S. agriculture; Gary Brester and Eric Belasco with an update on the role of cattle cycles and drought on the U.S. beef industry; Vince Smith with insights on the implications of the Canadian Wheat Board reform; Anton continued on page a2

A large group boarded the bus to attend the Yellowstone River Conservation District Council Summer Tour in Yellowstone Park. Photo courtesy of Carol Watts, Custer County Conservation District.

Probiotics, prebiotics, health the focus of food science symposium

By University of Idaho Extension topic in the health and wellness fields. ComTopics centering on the health benefits mercially available food products containof probiotics and prebiotics are the focus ing probiotic bacteria are created for today’s of a free, public symposium to be offered consumers who want foods that are not only at Washington State University (WSU) nutritious but also health-promoting. November 1-2. Sponsored by the WSU/UI School of “This is a wonderful opportunity for Food Science, “Probiotics & Prebiotics: not only faculty and students at our local Promoting Better Health,” will begin with universities but also the Moscow-Pullman a welcome reception and introductory talks community,” said Denise Smith, director 4-6 p.m. Thursday, November 1, in the Food of the WSU and University of Idaho (UI) Science and Human Nutrition Building, School of Food Science. “Internationally room 103. On Friday, November 2, lectures recognized experts will share the most rewill be 8 a.m.-4 p.m. in the Compton Union cent advances on how the use of probiotics Building (CUB) junior ballroom east. may improve health and how our lives can The symposium will cover genomics be enriched because of the research.” of probiotic organisms; chemical and bioProbiotics and health is a “hot button” logical properties of prebiotics; and novel synbiotics. Probiotics in select dairy foods PRIVATE TREATY and how they affect human health, including Cherry Springs Ranch, Bridger . ................................A17 Feddes Herefords, Manhattan.....................................A17 weight control, will be presented as well as Thomas Herefords, Gold Creek...................................A17 the role of probiotics in animal health. Sidwell Ranch, Columbus............................................A17 “We have some of the most respected Ehlke Herefords, Townsend.........................................A17 professionals in the field coming to speak,” LIVESTOCK SALE said WSU/UI professor of food science Oct. 29, J & L Livestock, Billings...................................A5 Boon Chew. “We hope attendees will benNov. 8, Diamond D Angus, Valier.................................A13 efit from the lectures on this timely and Nov. 10, Laubach Red Angus, Big Timber...................A16 Nov. 13, Thistledew Cattle Company, Joliet..................A9 continued on page a2 important topic. Nov. 14, Montana Hereford Assoc Feeder Calf Sale,Three Forks.........................................................................A17 Dec., Courtney Herefords, Belle Fourche...................A17 Dec. 5, Brillhart Ranch Co, Musselshell.....................A17

Advertiser Index Page B1 Recipe Patch A49

Deadline for November is November 2

Trader’s Dispatch, October 2012 — Page A2

VERSATILE TRACTOR FOR SALE

1976 Versatile 850 tractor, Series II, 310 hp, 9680 hours, 3200 hours on overhaul, runs great, tires 50%. Asking................................................................................. $11,000 Phone Russell Darlington, (406) 386-2451, Big Sandy, Montana

Nebraska Youth Beef Leadership Symposium continUed from front page

– more in-depth information about the beef industry, meat science, marketing and the opportunity to work with a professional chef. Teams will take in presentations, but also will have the opportunity to work with the chef to create a new beef dish using beef value cuts. In addition, six $500 UNL College of Agricultural Sciences and Natural Resources will be awarded to juniors and senior participants. For more information about the Nebraska Youth Beef Leadership Symposium (http://animalscience.unl.edu/web/ anisci/ANSCExtensionYouthProgramNYBLS), including a list of sponsors, or to register, visit its website. More information also is available by contacting Sara Ellicott at 402-624-8030, email sellicott2@unl.edu or Brink at 402-472-6446, email dbrink1@unl.edu. Registration is $30 due by October 1. Late registration is $50 by October 19. Registration includes all materials, meals and lodging.

MSU to hold agriculture conference continued from front page

Join us for the Westmoreland Mining LLC

Annual Surplus Auction

Bekkerman on changes in the elevator industry in Montana; Tim Fitzgerald on landowners and oil leasing; Myles Watts on banking reform and small ag lenders; and Steve Anderson on the 2012 Census of Agriculture. The conference will conclude with lunch and a keynote speech from John Anderson on agricultural policy in a volatile environment. Anderson is the deputy chief economist for the American Farm Bureau. The cost of the conference is $20 and includes a free parking pass. Early registration goes through October 13. For more information and to register, visit www.ampc. montana.edu/fallconference.html or contact Keri Hayes at (406) 994-3511 or khayes@montana.edu. This event is part of MSU’s Celebrate Agriculture. A full schedule of events for the weekend is available at: http://ag.montana.edu/excellence/agappreciation.htm

Probiotics, prebiotics, health continUed from front page

Featured speakers will be Todd R. Klaenhammer, North Carolina State University; David A. Mills, University of California-Davis; Robert W. Hutkins, University of Nebraska, Lincoln; and Jean Soon Park, P&G Pet Care, Mason, Ohio. Several faculty members from the School of Food Science will speak on related topics. More information about the symposium and the school is available at http://sfs.wsu.edu/2012-symposium or by contacting event coordinator Boon Chew at 509-335-1427 or boonchew@wsu.edu.

THE TRADER’S DISPATCH (USPS 019-793)

October 2012 — Vol. XIII No. 9 Published monthly by Trader’s Dispatch Inc., 402 Montana Ave., Valier, MT 59486-0306. Free on request to farmers, ranchers, heavy equipment owners and truckers in the Western United States. Non-qualifying in-state annual subscription fee is $15. Out-of-state nonqualifying U.S. annual subscription $25. Periodicals Postage Paid at Valier, MT and at additional mailing offices.

Deadline Friday before first Monday of each month.

Postmaster: Send address changes to Trader’s Dispatch, PO Box 306, Valier, MT 59486-0306 Curt Aaberg, sales rep. Jean Aaberg, production Geri Aaberg, circulation Chrissy Kolste, content organizer Kathy Peterson, Chrissy Kolste, graphic artists Office Phone 406-279-3291 FAX 406-279-3249 e-mail: trader@3rivers.net www.tradersdispatch.com Notice: Advertisers purchase space and circulation only. All property rights to any advertisements produced for the advertiser by Trader’s Dispatch, using artwork or typography furnished or arranged by Trader’s Dispatch shall be the property of Trader’s Dispatch. No such ad or any part thereof may be reproduced or assigned without the consent of Trader’s Dispatch.

Trader’s Dispatch, October 2012 – Page A3

Trader’s Dispatch, October 2012 — Page A4

MISCELLANEOUS FOR SALE

John Deere 566 round baler, 8300 bales, gathering wheels, twine only.................................................... $15,000 obo Morris Hay Hiker 14-bale mower................... $25,000 obo (8) 800/70R38 Goodyear R1W tires, less than 400 hours.. .................................................................... $30,000 obo Phone 406-350-2240 – Buffalo, MT

PLOW TRUCK FOR SALE

1973 Chevrolet dump truck with snow plow and sander, 5+2 transmission Phone (406) 799-6923

Tackling the issues of the beef industry

By Dr. Les Anderson, Beef Extension Specialist, University of Kentucky to meet the newest challenges faced by In September, 110 leaders in the Kentoday’s industry and maintain Kentucky’s tucky beef industry gathered to help direct position as THE source for feeder calves local and state educational beef programin the United States. And to determine and ming for the next decade. This meeting was sustain the future direction of UK’s Beef sponsored by the University of Kentucky IRM educational efforts as they continue to (UK) Cooperative Extension Service, the serve the Kentucky Beef Industry.” Kentucky Cattlemen’s Association, the Leaders were broken into small groups Kentucky Beef Network, the Agricultural and were asked to identify the five facDevelopment Board, Bluegrass Marketing tors that were the most important or most Group, Tarter Farm and Ranch Equipment, limiting the beef industry today. The major and Central Kentucky Ag Credit. The misissues identified by these leaders included sion of this conference was “Empower the limited knowledge of the public on agnew leaders in Kentucky’s beef industry riculture, the dearth of young people in the who will help shape local, regional, state, beef industry, efficient use of land, marketand national beef extension programming ing options/profitability, and animal welfare. Many counties identified the top local issues as public education on ag and animal welfare. Two new state programs will be developed to address these issues. Dr. Darrh Bullock will lead an effort to create a new certification program that will focus on proper animal handling and animal welfare. Another new program being developed is a Professional Cattlemen’s Program. The goal of this program is to identify a group of cattlemen and train them to professionally interact with the public on behalf of the Kentucky Beef Industry. Another undertone of the meeting was production efficiency. To address this issue, a Master Marketer program will be added to the Master series of beef educational programs. Also, a Cow-Calf Conference that focuses on business and production efficiency will be developed. This conference will address banking, enterprise analysis, budgeting, and whole-farm resource analysis to help ranchers identify methods to enhance their business. Our leaders also identified the need for infusing more young people into the beef industry. Many local county programs are planned to help identify new farmers and get them involved. Also, this generation of farmers accesses and processes information much differently than previous generations so new educational materials need to be developed to meet their educational needs. We also discussed the FarmLink program in Wisconsin. This program networks retiring dairymen with younger people interested in the dairy industry. This network builds a relationship so that the mentor can help the young dairyman enter the industry. Our long-term goal is to establish a program similar to this for beef producers in Kentucky. The issues have been identified and plans have been created. Now it is up to each local county group, the UK Beef IRM team, and the Kentucky Beef Network to begin to implement these action plans and move the industry forward.

Wolf trapping classes set in North Central MT

Online registration is now open for wolf trapper certification classes in north central Montana. Certification and a trapping license are required to take part in the wolf trapping season: December 15 to February 28. Three classes are scheduled in Fish, Wildlife and Parks Region 4: Saturday, September 29: FWP, Region 4 office, 4600 Giant Springs Road, Great Falls. Saturday, October 13: Pondera Shooting Sports Building, Granite Road, Conrad. Sunday, October 14: FWP, Region 4 office, 4600 Giant Springs Road, Great Falls. All the classes run 9 a.m. to 4 p.m. There will be a break for lunch and students are responsible for their own lunch. Also part of the class will be outdoors and students

Trader’s Dispatch, October 2012 — Page A5

FOR SALE

should dress for the weather. Class sizes are limited to 50 students. To participate in a wolf trapper certification class, potential trappers must register online through the FWP website, www. fwp.mt.gov (look under the Education tab, then click “Wolf Trapping Education”). The system will ask for contact information including an ALS number. Registration is also available at: http://tinyurl.com/ wolftrapping Classes will also be held at other locations across the state; details on these and other classes can be found on the online scheduler. Students must attend the entire class session to be certified. Trapping licenses are on sale now and cost $20 for residents and $250 for nonresidents.

Used Flexi-Coil 5000 air drill, 41/2” packer wheels, 6 & 4 wheel 12” spacing complete and individual wheel. Barber 6” hydraulic drill fill auger. Columbia grain door, complete. Stove fuel stove, no electricity needed. Good for bunkhouse or cabin. Call Paul, 406-737-4486, Geraldine, MT

920 acres north of Denton, Montana. Very high yields, low hail area. 784 acres of farm land, 136 acres of grass and timber.. ................................................... $943,786

P.O. Box 3603 Lewistown, MT 59457

406-538-7400

Don 406-366-3216

Lloyd 406-366-3194

MONTANA

ANGUS FEMALE BONANZA IX MONDAY • OCTOBER 29, 2012 • HIGH NOON Public Auction Yards • Billings, Montana • Auctioneer Ty Thompson 406-698-4783

2541 BRED ANGUS FEMALES SELL

Including:

876 BRED HEIFERS

These Bred Females selling are the REAL MONTANA KIND! This offering will have as much quality and program as any set of females you will find anywhere in America.

• 435 AI Bred to TC Franklin 619 All carrying bull calves. Calve February 4-19.

• 100 AI Bred to TC Franklin 619 All carrying heifer calves. Calve February 4-19.

• 49 AI Bred to TC Franklin 619 All carrying bull calves. Calve Feb. 21 - Mar. 8.

• 100 Pasture Bred Heifers

Carrying bull calves. Bred to Sons of Franklin & Dublin. Calve March 1-31.

• 62 Pasture Bred Heifers

Carrying bull calves. Bred to Sons of Franklin & Dublin. Calve April 1-30.

• 30 Pasture Bred Heifers

Carrying both sexes. Bred to Sons of Franklin & Dublin. Calve March 1-31.

• 100 Pasture Bred Heifers

Carrying both sexes. Bred to Sons of Franklin & Dublin. Calve April 1-30.

1265 2-COMING 3-YR-OLD ANGUS COWS • 250 AI Bred Black Angus

AI Bred to Connealy Dublin. Calve Apr. 1-3.

400 3 & 4-YR-OLD ANGUS COWS

• 15 Black Angus

AI Bred to Connealy Dublin. Calve Mar. 1-10.

• 200 Black Angus

• 500 Black Angus

• 175 Black Angus

• 300 Black Angus

• 25 Black Angus

• 100 Black Angus

Bred to Sons of Franklin & Dublin. Calve Mar. 1-31.

Bred to Sons of Madison & X Factor. Calve Mar. 1-31.

Bred to Sons of Franklin & Dublin. Calve Apr. 1-30.

Bred to Sons of Madison & X Factor. Calve Apr. 1-30.

Bred to Sons of Madison & X Factor. Calve May 1-30.

• 100 Black Angus

★ All females will be cleared for health to go anywhere in the U.S. and Canada. ★ All cows and heifers ultrasound pregnancy tested and calves sexed by Dr. Ralph Miller. ★ Officially Bangs vaccinated. ★ All cows and heifers have been on a sound health and mineral program. Express 5-VL5 and Ivermectin Pour On in the spring. ★ Cattle will sell in uniform short day calving periods. ★ Sold on a gate cut basis. Broadcast live on Northern Livestock Video Auction Dish Network Channel 94 Online at www.cattleusa.com Sale book and video preview can be viewed at LI V N IO EST www.northernlivestockvideo.com after October 10th. OCK VIDEO AUCT

Bred to Vermilion bulls. Calve May 1-30.

CONNEALY DUBLIN

TC FRANKLIN

f Northern Ca Best o ttle! The

For Information Contact:

CED +6

J&L LIVESTOCK

BW +.5

WW +55

YW +95

Milk +25

CED +2

BW +2.5

WW +49

YW +97

Milk +23

Joe & Linda Goggins • Billings, MT 406-861-5664 (C) • 406-373-6844 (H) Merrill & Kathleen Ostrum 406-321-1320 or 406-328-4878

Trader’s Dispatch, October 2012 — Page A6

Help small businesses transition, not close

Development officials say several approaches can help small-town businesses survive their owner retiring, but it’s important to start with the understanding that most owners don’t seek out such help on their own and many, indeed, don’t even want others to know they’re contemplating quitting.  Representatives of the Nebraska Business Development Center and Center for Rural Research and Development, both based at the University of Nebraska at Kearney, participated in this year’s Nebraska Rural Poll, which explored rural Nebraskans’ feelings about what becomes of small-town businesses when their owners retire or leave the business. Nebraska research shows that as many as one-fourth of all Nebraska small business owners are likely to exit their business in the next five years and up to one-half over the next decade. Rural development agencies are developing approaches that might help businesses survive their owners retiring. Business owners tend to be fairly conservative. They’re unlikely to explore options for how to leave their business and may just plan on liquidation, said Odee Ingersoll, director of the Nebraska Business Development Center. He said his agency has found that holding public informational meetings isn’t very constructive because business owners are not likely to turn out; they may not want others to know they’re thinking of quitting the business. He encourages business owners in this situation to do some planning, the farther ahead the better. Rural development officials might be able to help them find a buyer for their business. “We prefer to develop a local owner,” Ingersoll said. “Keeping the wealth in the community is the key.” His center can help identify businesses that are viable enough to warrant transition help, and it’s working to help community leaders understand their role in helping businesses transition to new ownership. One possibility is to try to attract Nebraska natives back home to buy existing businesses, said Shawn Kaskie, director of the Center for Rural Research and Development. The center is trying to develop a database of job and business opportunities to market to university alums, especially those who have left the state but may be looking for a way to return.

Trader’s Dispatch, October 2012 — Page A7

2012 CONSIGNMENT AUCTION Farm, Ranch, Shop, Antiques & More!

Saturday, October 20th, 2012 at 10:00 AM - McCone Cty. Fairgrounds, Circle, MT

Livestock equipment, pickups, semi-truck, hopper bottom grain trailers, single axle grain truck, loader tractors, skid steer and more to come! Taking consignments until October 15th. Call Russell for details. Keep checking our website as items will be added as they come in.

Sale Managed & Conducted By

Montana Auction Company, Inc. 384 MT HWY 200W - Circle, MT 59215 Russell Pederson (406) 939-2501

www.montanalandauctions.com

Trader’s Dispatch, October 2012 — Page A8

IRRIGATION EQUIPMENT FOR SALE

6” aluminum mainline, McDowell gaskets and ring lock. 8” aluminum ring lock pipe. Approximately 3400-ft. of 6” aluminum mainline with risers. Approximately 1300-ft. of 8” aluminum mainline with risers. 3000-ft. of 3” 200# plastic pipe. 9000-ft. of 4” 200# plastic pipe. 2-ThunderBird 1/4-mile wheel line. Phone (406) 278-5531, ask for Dale or Chet

TRIPLE C TRUCKING AND HARVESTING For all your trucking and harvesting needs.

Phone Trent Cline (406) 390-1413 or Travis Cline (406) 262-3534

Grand Champion Market Lamb shown by Bob Lund at Wibaux County Fair held August 23-26 in Wibaux, Montana. Photo courtesy of Renee Nelson.

CASNR names 2012-2013 ambassadors

Reduced dockage. Lower discounts. And a * improvement in your ROI.

20%

Some decisions are easy.

The Clearfield® Production System is the only complete herbicide-tolerant system for wheat. You’ll see cleaner fields and grain, better yields and improved Return On Investment. As part of the system, Beyond® herbicide controls more than 40 tough broadleaf weeds, including jointed goatgrass, downy brome and Japanese brome. And it’s the industry’s best option for managing feral rye. Go to Clearfield-Wheat.basf.us, or talk to your BASF retailer. And remember, Stamina® fungicide seed treatments will help your seedlings get off to a fast start. *BASF Field Study (2002–03) in winter wheat. Assumptions: grain value = $5.00/bu; Clearfield seed = $10.00/bu; conventional seed = $8.50/bu; average yield = 74 bu/A. Dockage = 5% (Traditional) and 0.5% (Clearfield). Foreign matter = 1% (Traditional) and 0.2% (Clearfield). Beyond herbicide rate = 4 oz/A. Results may vary by region. Always read and follow label directions. ©2012 BASF Corporation. All Rights Reserved. APN 12-01-191-0006

The University of Nebraska-Lincoln (UNL) College of Agricultural Sciences and Natural Resources (CASNR) recently announced its student ambassadors for the 2012-2013 academic year. Students are chosen through an application and interview process and serve one to three years.  The seven selected were: • Melissa Matulka, Thedford, Nebraska, animal science and agribusiness • Alissa Doerr, Creighton, Nebraska, agricultural economics • Boone McAfee, Leigh, Nebraska, agricultural economics • Eric Miller, Lyons, Nebraska, agribusiness and animal science • Brooke Grossenbacher, Overland Park, Kansas, food science and technology • Ethan Smith, Eustis, Nebraska, agricultural economics • Colton Knickman, Syracuse, Neb., mechanized systems management The group’s responsibilities include recruiting for the college through campus and outreach events, said Laura Frey, UNL college relations director. They also promote the university and the college, meet with prospective students and give tours of UNL’s East Campus. For more information about the ambassador program, visit http://casnr.unl. edu/ambassadors.

Trader’s Dispatch, October 2012 — Page A9

Practice of breeding cattle for fall calving

HERD DISPERSION

170 Simmental/Angus cows, red and black. Start calving 2/1/13. Available 11/1/12. Bulls also for sale.

For a number of years, the trend in southwest Missouri has been toward fall calving. The practice been prompted, to some extent, by the inability to breed cows and heifers for spring calves on endophyte infected fescue. “The females, no doubt, were affected by high temperatures and if they bred they might not stay bred. Research now indicates the problem may even have been influenced by the bull’s lowered conception rates in hot weather,” said Eldon Cole, a livestock specialist with University of Missouri Extension. Cole says many cattle producers found that as the temperatures lowered in the fall the females would breed and stay bred. As a result, it almost became a common recommendation across the area to turn the bulls in or artificially breed cows right around Thanksgiving. This practice resulted in a lot of early September calves. However, more recently, those early September calves have been coming in August. Why does this happen? According to Cole, calving ease bulls may have had an influence since they often have a shorter gestation length. “Some have found pushing bull turnout into early November gave their calves a bit more age and weight in the spring when feeder cattle market prices usually peak in April. Some folks still breed the cows for September 1 calves, but expose heifers a few weeks earlier,” said Cole. Another factor could be related to hot fescue and elevated ambient temperatures. Cole says since we have had an unusually hot summer and are in late July, producers with heifers or cows due to calve in the next month should watch them closely and expect those calves to arrive early. “In fact, they may need as much attention as wintercalving females. The only difference is you’re combating heat, flies and sometimes females that don’t produce much milk instead of cold and snow,” said Cole. Cattle in other areas of the country, like South Carolina, are bred to calve in November or December. Of course, the weather and forages in those states are different. “Mid-August calves in normal years may be fine, but keep a close watch on them as they do tend to come early especially,” said Cole.

Call Herb Bingham 406-469-2250, Pendroy, MT

PICKUP FOR SALE 2007 Chevrolet 1500 LT-Z71 Silverado 4x4, 4 door, seats 6, 5.3L V-8, automatic, Michelin tires, remote start, loaded. One owner. 93,000 all highway miles. Book value $23,375..................

$19,950

Call 406-263-7140

Common Sense Cowman Commercial Bred Heifer and Bull Sale Tuesday, November 13th at 1 p.m.

Pine Bluff Ranch in Joliet, MT

Selling 500+Select Bred Heifers and Angus Bulls

MATERNAL AND POWERBULLS

COMMERCIAL BRED HEIFERS

Buy groups of 5 or more

AI’d to: SAV Final Answer Cole Creek Cedar Ridge GDAR Game Day Conneally Right Answer

Bred to calve February- April w

Sexed pregnancies

Featuring 40 Premium Bulls and Maternal Bulls

w w

Buy online with a 100% guarantee or your cash back w

Both Fall and 2 year old Range Hardy bulls

Thistledew Cattle Company

Calve in a 10 day window

Cake broke and docile

Special offering of 50 outstanding highly efficient Cowmaker commercial females. Loaded with convenience traits and backed by a breeding program of significance

Aberdeen Angus Cattle for 39 years

Sale broadcast live online Contact Christopher and Melinda Jeffrey for a Sale Book

PH: 406-962-3310

E:mjeffrey@wildblue.net

Trader’s Dispatch, October 2012 — Page A10

TRAILER & TRUCK FOR SALE

Wilson 45-ft. straight livestock trailer, low profile with winter side kit, good tires and brakes. 1970 Ford F600 truck with 18-ft. box and hoist. Call 406-462-5500 evenings

TRACK LOADER FOR SALE

1977 Cat 931 track loader, make very good ranch Cat, fair undercarriage, runs and works good............................................ $5500

With a lineup of equipment like this Gorden Haynes Custom Harvesting crew can really cut the acreage in a hurry. This photo was taken by Jonathan Schulz of Vernon, Texas. He is part of the harvesting crew that included people from Scotland, England, South Africa and the USA.

Phone 406-452-0300

Connecting Young Nebraskans Summit

Precise. Gentle. Precise. Gentle. Efficient.

Call now and ask about the near-singulation accuracy of our UltraPro Canola Meter, our game-changing NovaXP Smart Cart, and the huge cost-savings you’ll gain with our Auto Zone Command overlap control.

The Leader. By Design.

™

1.888.721.3001

™



www.seedmaster.ca

Registration is now open for the 2012 Connecting Young Nebraskans (CYN) Summit October 25-26 in North Platte.  The summit, designed to connect and empower young Nebraskans, will be at the Sandhills Convention Center. Keynote speaker Peter Shankman, an author and entrepreneur, will share his innovative thoughts about networking and how it applies to this group of young leaders. The summit will begin at the Golden Spike Tower on October 25 at 6 p.m. with a social in which participants can choose from activities including laser tag, navigating a corn maze, or gathering around a fire pit to enjoy products from Nebraska’s wineries and breweries. Coffee-shop discussions are planned October 26, an opportunity for networking, as well as professional, community and civic breakout sessions. Topics will include “Understanding How the Affordable Healthcare Act Will Affect Me,” “Non-Biased Political Information We All Hunger For” “Creative and Smart Ways to Invest in Your Future” and more. CYN’s goal is to help young leaders have an impact on their communities through networking and learning experiences. For more information about CYN or to register for the summit, visit cyn.nebraska.edu. Find CYN on Facebook (https:// www.facebook.com/youngnebraskans), or follow CYN on Twitter (@youngnebraskans). The official summit hashtag is #CYN2012.

Trader’s Dispatch, October 2012 — Page A11

PICKUP, CAR & BACKHOE FOR SALE

1997 Ford F250 3/4-ton, 2WD, heavy duty extended cab pickup, 79,000 original miles, power windows/seats, air conditioning. No dings, no dents, all good glass. Just tuned up and serviced, new rubber......................................................................................... $11,500 offer $12,000 12-ft. self-contained camper available...........................................Take both $15,500 2005 Ford Crown Victoria loaded, 25-30 mpg., real low miles, good road car..........$10,000 1998 John Deere 310 SE Extend-A-Hoe, 4WD, new rubber, every light and accessory works, 3500 hours, kept inside..............................................................................................$35,000 Call 406-544-9963 cell or 676-8510 leave message

Are my apples ready to pick?

By Jim Stordahl, Clearwater/Polk County Extension Service, Minnesota How do I know when to pick my apples? Can they withstand a frost? These are two common questions in Extension offices as gardeners watch the forecast and their fruit trees. Apples will have the best flavor and will store longer if picked at maturity. This typically occurs around our first frost, but may vary from year to year and by variety. Although there are a few ways to determine maturity in apples, the most entertaining method is one used by Mary’s father. Mary, our former office manager, told me that her father had a test that seldom failed. When he suspected the apples were close, he would invite an unwitting young child to take a bite of a recently picked apple - and wait for the facial expression. Although this method is somewhat unscientific, it’s actually quite accurate -- not to mention entertaining! Of course, this method depends on the availability of small, innocent and unwitting children. In Mary’s family, this method worked for many years (11 children). Mary’s children are all on to this, so you’ll have to find your own. But, don’t discount grandchildren, children have a great deal of forgiveness for those that usually spoil them. However, if you need a method with more scientific merit – or you do not have access to small, innocent and unwitting children; there are three simple methods to determine proper maturity for harvest. The first test is to pull the apple from the tree. A ripe apple will release easily with mild pulling pressure coupled with a slight twist. If the apple hangs on tight, it may need more time. The second test is color. As the apple ripens, it tends to turn red. Of course, this is dependent upon variety, but color is one indicator used by commercial growers. The third test is seed color. Ripe apples have dark seeds. Cut the apple so that the seeds are exposed. A fully mature fruit will have full color in all seeds, however, it’s not uncommon to have variation in color (no color, 1/4 brown, 1/2 brown, 3/4 brown, full color). Commercial growers monitor sample changes in seed color each week to predict harvest. The final – and most entertaining – test is the taste test. Varieties developed for table stock should have a “ripe” taste, not too tart and not too starchy. Apples are able to withstand light frosts, as long as the overnight lows do not dip below 26 degrees. However, if such temperatures do occur, do not handle the apples early in the morning; they may have ice crystals. Let the fruit thaw before you begin harvest, especially if you plan to store them for any length of time. If the fruit is not ripe and temperatures threaten to drop below 26 degrees, harvest the apples even if they are not quite ripe. They can still be used in cooking and baking with added sugar that Mother Nature was unable to provide during the season. For more information, contact me at 800-450-2465 or stordahl@umn.edu.

Wes Koss Hunting Real Estate

October 19th, 2012 ~ 4:00 p.m. Sale conducted by Larry Olson Auction Co., at the “Wes Koss” Ranch shop. 42 miles south of Malta on the Regina Road. Signs will be posted.

342 deeded plus 100 BLM acres located in Langton Roughs in the heart of the Larb Hills. Approximately 50 miles south in Phillips County, Malta Montana. BLM borders on west and south sides of property. Home of ELK ~ MULE DEER ~ SHARPTAIL ~ HUNS AND VARMITS! Beautiful Montana sunrises & sunsets!! Possession upon closing: Your bid is considered acceptance of the terms of Views of the Little Rockies, Bear Paw this auction. If buyer fails to close the Mountains and Little Snowies! Title Insurance: The seller will provide down payment is non refundable. If standard owners title insurance through seller fails to close, 100% of the down Dave Broadbrooks P.C. Title Co., Malta, payment will be returned. All funds will Montana. Closing costs will be split be held in escrow at the P.C. Title Co. equally between buyer and seller. So whether you hunt with a gun, a bow and arrow or just a camera, you won’t Terms: A non refundable down payment want to miss out on this rare piece of of 10,000.00 cash must be paid at the Montana land to call your own!!! sale day for final bid. The balance will be due in cash at closing date within 45 days from the winning bidder. Property sold as is where is. The buyer is responsible for conducting their own investigation and review of the property. The final bid will be subject to sellers approval with approval or rejection within 24 hours of auction completion Wes Koss 406-658-2612 Contact Information: Auction Co. – 406-658-2683 – oldehomestead@yahoo.com pictures can be emailed by request

VIEWINGS BY APPOINTMENTS. WATER: Springs on the land. Small reervoir if spring run off is available. Power located half mile away from proerty. Guaranteed access into property along east side of fence boundary. Mineral and water rights: NONE Land description: Section 19 T24N R33E South 1/2 + Property taxes are paid for 2012.

Larry & Eva Olson

Antiques, bits & spurs collection (about 50 pieces) & Western collectibles White Angora chaps by F. Mueller, Denver

Horse driving cart, steel frame, wooden shafts, Kevlar tires, single horse driving harness

2007 Honda Rancher, liquid cooled 4x4, 1000 miles, rifle scabbard, racks, cover

HiQual bull feeder plus 9 sections of HiQual bull feeders for repair

Pictures at ellisauction.com after September 14.

Open House ~ Sat., October 13th ~ 10 a.m. - 3 p.m.

Trader’s Dispatch, October 2012 — Page A12

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT THEM IS NOVEMBER 2.

Automotive Machine Service Center Specializing in Ford & GM diesels

REBUILT ENGINES • Domestic • Import • Performance

With the ability to Rebuilt By Montana’s Largest flash software & Production Engine Rebuilder reprogram Ford, INSTALLATION AVAILABLE!! GM and Chrysler Winter is Here! Bring your vehicle in for your cold weather needs

Including air bags, coded keys & etc., etc.

• Block heaters • Batteries • Anti-freeze • Gas line anti-freeze • Tune-up accessories • Radiators • Radiator hoses

Call 406-771-1688, ask for Doug

• The list goes on...

Full Engine Machining Service 4 Grinding 4 Boring 4 Milling 4 Head Work

WISCONSIN ROBIN

M-F 8-5:30 MADE IN MT

1-800-428-7896

813 25th St. North Great Falls, MT

761-6720

Dr. Loren Evans Estate Tuesday, October 30, 2012 11:00 a.m. MST

Ronan, Montana ~ 35572 Little Martin Road, Ronan, Montana

Preview: Monday, October 29, 2012 (10:00 am to 6:00 pm) Directions: Take Little Martin Road, West, off of Hwy 93 South, (the first county road south edge of town) go approximately 1/4 mile on right hand side. Auction signs will be posted.

Tractors & Machinery

Ford TW15 tractor, 4WD, 6 cylinder diesel with Farmhand F236 loader, 7-ft. grapple, bucket and hay spear, 5000 hours. SN G748709. 1983 Ford TW5 tractor with Farmhand F235 loader and bale spear, 2WD, 4600 hours, SN C702797. 1953 Ford NAA Golden Jubilee with 19-42 Dearborn loader. John Deere 920 MoCo rotary swather. SN E00920X976774 John Deere 566 round baler. SN E00566X136449.

Implements & Attach.

John Deere 702 8-wheel rake. John Deere 74 side delivery rake. SN E00074G102704. International 5500 14-ft. chisel plow. Servis LS 8-ft. backblade. SN 029491. John Deere 14-ft. cultipacker. 12-ft. spike tooth harrow/drag 5-ft. Brushhog

Auctioneer’s Note: Dr. Evans passed away this summer and the Trust is liquidating his personal property.

Shop, Tools & Miscellaneous Squeeze chute / 24-ft. bale elevator / Craftsman bench grinder. / Vintage Calkins combination grain screen (cleaner, grader, treater) / Approximately 30-40 ton of 1 to 2 year old hay / 25 new 4” x 6-ft. treated wood posts / Miscellaneous tires and wheels / 16-ft. canoe (needs repairs) / wheel barrows / Used rough cut lumber / Miscellaneous hand tools / Miscellaneous tack / Mis-

Credit cards and terms: Unless noted otherwise all items are reported to be in good working order at the time of the sale. However, all sales are “as is” “where is” with no guarantees by Rivers West Auction, LLC. Announcements the day of auction supersede any previous ads. Driver’s license or government issued ID required to register as a bidder. Our normal terms and conditions are as follows: These major credit cards are accepted, Master Card, Visa, American Express, Discover and debit cards. We accept bankable checks with a Montana driver’s license if you are known to the auction company. If you are unknown to the auction company, finances will need to be declared at registration. If you are purchasing a titled item or piece of heavy equipment (car, truck, boat, forklift etc.), a bank letter of credit is recommended if you are unknown to the auction company. If using a credit card, you will be charged a 4% convenience fee. There will be certain auctions where these terms may change. When there is a change it will be noted in the Auction Calendar and explained prior to the auction. Announcements made sale day take precedence over previous advertising and statements.

cellaneous fencing materials / 10-ft. x 10-ft. dog kennel, chain link / Electric smoker.

Live Online bidding will be available powered by Bid Caller.

Phone Bids will be accepted.

Jason Clinkenbeard 406-239-3529 jason@riverswestauction.com

Lake County Real Estate

158 +/- Acres of Irrigated land with Homes and Outbuildings to be sold in 2 parcels and as Entirety.

~ ~ TIME CHANGE ~ ~

Tuesday, October 16, 2012,

6 P.M.

Location of the sale: On site at 65633 US 93 South, Ronan, Montana 59864 from Ronan, Montana, South on Highway 93, 1.5 miles, west side of the highway.

Drought impacts could accelerate this fall

By Derrell S. Peel, Oklahoma State University Extension Livestock Marketing Specialist It is difficult to estimate just how much impact the drought this year has had on the cowherd. Beef cow slaughter for the year to date is down nearly 11 percent from last year, a smaller decline than previously expected. While this indicates some additional herd liquidation, just how much more beef cow slaughter would have declined without a drought is uncertain. Perhaps even more uncertain is what is happening with replacement heifers. The inventory of beef replacement heifers was up slightly at the beginning of the year but the drought could be forcing producers to divert more heifers into feeder cattle markets rather than entering the herd as breeding animals. The number of heifers on feed on July 1 was up slightly from last year. The combination of cow slaughter and heifer placement into the herd will determine the year over year changes in the beef cowherd inventory. Whatever level of liquidation has already occurred leaves the important question of whether producers have made enough adjustments relative to forage conditions and winter hay supplies. There are some anecdotal indications that minimal adjustments in cattle numbers have been made in some areas leaving those operations especially vulnerable to winter weather conditions. Pasture and range conditions remain very bad in many regions, though most areas have shown slight improvement recently. Percent of pastures and ranges rated as poor to very poor are 59 percent for the entire country with higher percentages for the Great Plains (77 percent); Corn Belt (69 percent); and Southern Plains (66 percent) along with the Western region at 54 percent. These are slightly offset by significant improvement in pasture conditions in the Southeast and Northeast. Poor summer grazing conditions this year are accompanied by severely reduced hay production. The August USDA Crop Production report included estimates of 2012 alfalfa and other hay production for the U.S. and for most states. Alfalfa hay production is estimated to decrease by 21.5 percent and other hay production is projected to decrease by 13.3 percent compared to the 2006-2010 average. These combine for an estimated 2012 all hay production for the U.S. that is 17.3 percent smaller than the 2006-2010 average and would be the smallest total U.S. hay production since 1976. This estimate includes 21 states with all hay production down by more than 10 percent and includes 13 states with reductions in excess of 20 percent. Current year hay production plus May 1 hay stocks represent the total supply of hay available going into the winter. Total U.S. May 1 hay stocks were 5.9 percent above the 2006-2010 average but this masks the fact that hay stocks were down more than 10 percent in 14 states, including several states impacted by drought in 2011 or 2012 or both years. The estimated all hay supply for 2012 (May 1 stocks plus 2012 production) is down by 14.4 percent for the U.S. compared to the 2006-2010 average including 18 states down more than 10 percent, of which 12 states are down more than 20 percent. Arkansas is the lowest with an estimated 2012 total hay supply down 49 percent from average, followed by Iowa, Oklahoma and Kansas, all down 33 percent or more. An additional five states (Illinois, Indiana, Missouri, Nebraska and Wisconsin) have 2012 hay supplies down more than 25 percent from average. Other states with estimated 2012 hay supplies down 15 percent or more include Colorado, Kentucky, South Dakota, Texas and Wyoming. Limited hay supplies will be accompanied by record hay price. Current Livestock Marketing Information Center (LMIC) projections put the 2012/2013 season average hay price at a record $195/ton, exceeding the 2011 record of $173/ton and up 60 percent from the 2006-2010 average of $122/ton. Cow culling normally peaks seasonally in the fourth quarter and we may be vulnerable to stronger than normal culling this year. The reality of limited forage and hay supplies combined with high hay and supplement feed cost could prompt additional sales of cows and other cattle this fall. The current pace of beef cow slaughter implies a herd culling rate of 11.4 percent, which is above the long term average of 9.6 percent, but well below the 2011 rate of 12.3 percent. Additional cow culling may be needed this fall. For example, a modest increase in the beef cow herd culling rate to 11.6 percent, would mean that beef cow slaughter for the remainder of the year would be down only 5.25 percent compared to last year and would result in a year over year decrease in beef cow slaughter of 8.5 percent. It all depends on how much adjustment to limited forage supplies has already been done and how much more might be needed in the next couple of months.

Trader’s Dispatch, October 2012 — Page A13

The DiamondwD Advantage 1-800-932-6487

Mark DeBoo

406-279-3633 100% Forage Developed

www.diamonddangus.com

• Bulls more fertile • Structurally sound • More years of service

• Will breed more cows than yearlings Coming 2 Year Olds • They will hold their condition better

November 8, 2012

Calving Ease

at the Ranch ~ Valier, Montana

NEW WINTERING PROGRAM! Wintering available at DDA through April at $2/head/day. In the event of injury/death, DDA will assume 50% of the risk on bulls wintered at the ranch.

Genetics

Consistency

Affordable

• Diamond D Angus bulls have a long history of outstanding calving ease • No Precision. No 036 New Design. No Fame Focus. All good clean pedigrees. 99% are descendants of Lodge of Wye. Lodge is 1 of 12 bulls in the entire breed proven genetic defect free. Many of the bulls we are selling are grandsons of Lodge. Many trace multiple times to Lodge. These genetics work well in the grass fed industry or the feed lot due to their moderate frame. • 50 years of breeding like cattle on like cattle on like cattle. This eliminates variables. • Bulls sold in the fall have been significantly more affordable than spring sales. More than 50% of our bulls sold the last two years brought $3,000 or less.

: g n i l l e 120 Long Yearling Forage Developed Bulls S BLACK & RED ANGUS

w 50 Bred Heifers w w 50 Bred Cows w

Come see our outstanding 100% forage developed bulls!

Trader’s Dispatch, October 2012 — Page A14

J&M Trailer Sales

FOR BEST QUALITY & PRICE IN MONTANA

THE PRICE YOU SEE IS THE PRICE YOU PAY - NO DOCUMENT FEES OR UPCHARGES

NOW OFFERING FINANCING! CALL FOR DETAILS PAYMENTS AS LOW AS $136/MO FOR 48 MONTHS, 20% DOWN

(NAPA Auto Parts)

www.jandmtrailers.com

11 4th Avenue • Laurel, MT 59044

1-800-745-8871 or 406-628-6316 New 2012 Delta Gooseneck Flatbed Trailers Special Orders 14 Days Out

25-ft. 14,000# GVW, Tandem Spring Axle, IN STOCK...................$6350 26-ft. 23,400# GVW Tandem Spring Axles, IN STOCK..................$8350 28-ft. 23,400# GVW Tandem Spring Axles, IN STOCK..................$8550 30-ft. 23,400# GVW Tandem Spring Axles, IN STOCK..................$8750 32-ft. 23,400# GVW Tandem Spring Axles, IN STOCK..................$8950 36-ft. “Oilfield Special” heavy duty tandem dually. Loaded including 2 speed jacks............................................................................$10,900

New 2012 Delta 16-ft. bumper pull stock trailer with center gate, rear slider, 6-hole wheels and 235x16 10ply radial tires............................$4950 With torsion axles.....................$5150

Harlan Kredit gave an interesting talk at the visitor center using Ray Beck, DNRC to demonstrate. Photo courtesy of Carol Watts, Custer County Conservation District.

YRCDC Summer Tour

New 2012 Load-Trail Gooseneck & Pull Type Dump Trailers

Features: * 2-7,000# Cambered EZ-lube axles w/electric brakes * Ramps for loading Bobcats * 16” 8 hole white spoke wheels * 235/85R16 tires * Battery operated hydraulic pump - power up/power down * 5” Bore cylinder scissor lift w/2” shaft - (14,000# lift capacity) * Free Solar Powered Battery Maintainer Included

8’x14 tandem axle 14,000# GVW, scissors lift, GN.......................$7650 *6’9”x14 tandem axle 14,000# GVW, scissors lift, GN................ $7650* *6’9”x14 tandem axle 14,000# GVW, scissors lift, pull type........ $6850* 8’x14 tandem axle 14,000# GVW, scissors lift, pull type...............$6850 * Trailers equipped with roll tarp.

New 2012 Delta Stock Trailers

• Heavy Duty Package • 10-Ply Radial Tires • Spare Tire & Wheel * Bull Package * Running Boards

2 Compartment Trailer - Sliding Outer Gate 6’x8”x20....................$9250 3 Compartments - Sliding Gates 6’x8”x24.....................................$9950

New Pickup Beds Many Sizes Available

Starting at...........$1650 In Stock - 102”x86” and 8.5’x86” Installation Available

The YRCDC Summer Tour for 2012 was a trip to Yellowstone Lake in the Yellowstone Park to see where the Yellowstone River originates. After the bus ride to Mammoth Hot Springs in Wyoming the group enjoyed lunch in the map room and listened to a talk on invasive species by Mr. Dave Hallac who also welcomed us to the Park. Next on the agenda was an update on where we are with the cumulative effects studies given by Warren Kellogg. Dennis Nelson, Project Wet, spoke about the “Kids in Discovery “ booklet that the YRCDC is sponsoring and Greg Johnson, Army Corps of Engineers answered questions on the progress of a fish passage at Intake near Glendive. Supper that evening was at the Mammoth Hotel dining room. That evening many self guided activities were an option, including beaver pond walks, a Fort Yellowstone walk, soaking in the Boiling River. There was also a program ”Extreme Yellowstone” held in the outdoor amphitheater where Ranger Dylan Corbin discussed life that

can live in high acidity and at boiling temperatures. The Summer Tour continued with a boat tour of Yellowstone Lake where Harlan Kredit is serving his 1st year as a resource education Park Ranger in the Fishing Bridge area of Yellowstone National Park. He has long had a deep interest in the biology and geology of Yellowstone Lake and its tributaries and enjoys educating visitors about park wonders each summer. Harlan spent 50 years teaching high school honors biology and earth science in Washington State. He also impressed the group with his talk at Fishing Bridge. After lunch it was on to the Marina to board our boat. The trip was a great learning experience and was enjoyed by all who attended. Thanks to the Montana Department of Natural Resources and Conservation, Conservation Resource Development Division, Conservation District Bureau, Resource Development Bureau, National Park Service – Yellowstone Center for Resources and Xanterra Parks and Resorts.

New Interstate Cargo Trailers 6x10 single wheel, 3500# GVW................................................... $3050 6x12 single wheel, 3500# GVW................................................... $3250 7x14 double axle 7000# GVW...................................................... $5200 7x16 double axle 7000# GVW...................................................... $5300 New Load Trail 20-ft. skid steer trailer with stand-up ramps, 16” 10-ply radial tires and 10,000# drop leg jack, 14,000 GVW....$4150

New 2012 Load-Trail Skid Steer Trailer

New Load Trail 20-ft. skid steer trailer with storable ramps, 16” 10-ply radial tires and 10,000# drop leg jack, 14,000 GVW....$3950

New 2012 Load Trail Car Haulers

7,000# GVW with 18-ft. flatbed, brakes, and both axles, brakeaway kit 16’ ................................................................................................$2690 18’ ................................................................................................$2790

$45 Extra for Beavertail 6 Ply Radial Tires Included

New 2012 14,000# Tandem Axle Tilt Deck Trailer

20’ tilt deck hydraulic 14,000# GVW............................................ $5250

New 2012 Load-Trail Flatbeds 83”x14 single 3500# axle RR & side load.....$1890 83”x12 single 3500# axle (storable ramps)...$1680 83”x12 single 3500# axle RR & side loading ramp........................$1790

ALL PRICES SUBJECT TO STOCK ON HAND

Dennis Nelson, Project Wet, spoke about the “Kids in Discovery “ booklet that the YRCDC is sponsoring and Greg Johnson, Army Corps of Engineers answered questions on the progress of a fish passage at Intake near Glendive. ##### Grammy, surrogate grandmother of a two-and-a-half-year-old girl nicknamed DD, was babysitting while her house was undergoing renovations. Some of the construction guys were a little rough around the edges, and one of them let loose with a profanity. Grammy cut him short saying, “Will you hush? We have a little repeater here!” DD chimed in, “Yup, I’m a peter!” ##### Grandmothers are just like an angel for each and every child. The love, care, and blessings showered by them on their grandchildren are incomparable to anyone else’s. They love us for ourselves and are always there to guide us with their wisdom.

Trader’s Dispatch, October 2012 — PageA15

Fertilizer Equipment For Sale 1989 Peterbilt 377 11L Detroit, 10 speed.............$11,500

l a i ec

1999 Ag Chem with air spreader box, 70-ft. booms, 4900 hours............................... $68,000

2006 Loral 6300 570 automatic with AirMax 1000 bed, 2200 hours....... $123,000

2007 Freightliner, Auto Shifter, 16-ton Wilmar tender with tip tops....................... $66,000 1997 Ag Chem 8.3 Cummins, 2001 Case 3300, 3 wheel, automatic, 70-ft. air booms..... Cummins, auto, 70-ft. booms. .................................. $38,500 .................................. $64,500

1983 Freightliner with Tyler 16 ton tender............. $19,500

Tyler 6-ton pull spreader with 36-ft. booms................. $7200 2008 Case 4020 with 330 hp, auto, and AutoSteer, 70-ft booms, 2000 hours.................................................................. 00 $168,000 $190,000 $162,0

1995 International Silver Wheels, 10 speed, 1800 gallon stainless steel liquid system, 3500 hours........ $35,000

1989 GMC semi-float with 8-ton Wilmar bed....... $21,000

1986 Kenworth Cummins 7 speed, Tyler 16-ton sideshooter............................... $29,500

Willmar 3-axle 24-ton self contained................... $39,500

1990 Volvo Cummins 10 speed, with 16-ton Wilmar tender........................ $24,500

1991 Loral DT466, automatic, 3020 NewLeader bed, DickeyJohn controller........... $26,000

1999 Loral DT530, autoshift, Air Max 5 bed, 5700 hours..... .................................. $51,000

1995 Loral 3000 Anniversary Edition, Air Max 5 bed, Dicky John controller GPS system, 300 hp, 60-ft. booms...$47,000

1999 Loral 4x4, “One of a Kind”, DT530 automatic, Airmax 5 bed.................. $71,000

1994 Loral DT466, 530 automatic, 90-ft. liquid boom......... .................................. $34,500 1997 International snow plow, DT466 automatic, complete with snowplow and sanding bed, runs good.......... .................................. $20,000

1994 GMC 3116 Cat automatic, New Leader 2220 bed....... .................................. $35,000

2002 International chassis, DT530 automatic, full rubber, above average, sharp, 2900 hours......................... $54,000 1978 Clark loader, 2 yard bucket.........................$11,500

1996 Loral DT530, automatic, chemical bin, 8700 hours, runs good.................. $36,500

1997 Freightliner with 3000 gallon propane tank... $31,000

10 trucks in service with pumps, hose reels and meters from $26,000 to $32,000 Case W14 front end loader, very portable. Great little maching for loading bales...... ...................................$11,200 1997 International 3000 gallon propane truck, diesel, in service....................... $31,000

5-ton tub blender.......... $7500

Doyle 8-ton blender on scale with new auger, 40 hp motor $18,500

1990 Ford with Cat 3208, auto, Wilmar spreader.........$33,500

1976 Trailmobile 9000 gallon aluminum tender, 5 compartments......................... 0 $26,000 $21,50

1996 Mertz 4300, 3208 Cat auto, 2-bin or 2 types of fertilizer system, you don’t need a blender with this........ $37,000

NH3 20-ft. pups, 265 psi, 4200 and 4500 gallon...................... .................$12,000 & $15,000

Greyn Fertilizer Supply

2005 Loral large Cat automatic, Air Max 1000 bed with 2600 hours....................... $103,000

Your full service fertilizer dealer.

www.fertilizerequipment.net 1972 stainless steel tanker trailer......................... $24,000

Larry Greyn Vern Greyn Eric Greyn Choteau 466-5356 Dutton 476-3402 Valier 279-3255

Trader’s Dispatch, October 2012 — Page A16

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT THEM IS NOVEMBER 2.

www.bigiron.com First Lots Scheduled to Close at 10:00 AM Central Time

Unreserved Auction ONLINE ONLY NO BUYERS PREMIUM FEE and NO RESERVES!!

The following equipment is owned by various owners, visit www.bigiron.com for owner names, item’s locations and phone numbers.

WEDNESDAY, OCTOBER 10, 2012 202 lots selling on this auction!

1982 International 5488 2WD row crop tractor 1981 International 5488 2WD row crop tractor 1965 John Deere 3020 tractor 1998 John Deere 566 baler 1990 Hesston 560 round baler John Deere 530 baler 1990 John Deere 1600 swather John Deere 2420 swather New Holland 114 swather 2011 Koyker post pounder 1979 Chevrolet C70 service truck 1979 Mercury Capri car

WEDNESDAY, OCTOBER 17, 2012 65 lots selling on this auction!

1984 Cat 140G motor grader 2005 John Deere 317 skidsteer Cat D7 dozer 1976 Brenner tanker trailer, 40-ft. 1964 Timpte belly dump trailer 1994 Ford F250 pickup

WEDNESDAY, OCTOBER 24, 2012 286 lots selling on this auction!

Ford 930 bi-directional tractor 1984 International 584D tractor John Deere 4020 tractor 1984 John Deere 4850 MFWD tractor 1996 John Deere 7800 MFWD tractor 1975 John Deere 4030 2WD tractor 1994 Gleaner R62 combine Burkeen trencher Massey Ferguson 510 combine 1992 Case IH 8580 square baler 1980 Chevrolet G20 van 1996 Hesston 1160 hydro swing pull type mower 1999 John Deere 955 MoCo mower conditioner John Deere DH714 grain drill Massey Ferguson 470 loader 1988 Ford F250 pickup 1991 Ford F150 pickup 1959 Chevrolet 3100 pickup 1999 Rears SPF 100G920 flail mower

Many more items selling in October, visit BIGIRON.com for more information. Do you have equipment to sell, call 1-800-937-3558 for your local representative. BigIron.com is a division of Stock Auction Company

Join us for our 2012 PRODUCTION SALE Saturday, November 10th 80 Bull Calves • 20 Heifer Calves 20 Bred Heifers • 20 Mother Cows 15 Commercial Heifers

Thoughts on feeding early weaned calves

By B. Lynn Gordon, SDSU Extension Cow/Calf Field Specialist The nation’s drought is pushing cattle producers to make decisions about the management of this year’s calf crop that many producers have not had to experience for a number of years. Craig Uden of Darr Feedlot, Cozad, Nebraska, is not only an experienced cattle feeder but also is a cow/calf operator who understands the many decisions cow/calf producers are facing going into the fall. Uden shares his thoughts on the impact of the drought on the industry and management steps for cow/calf producers considering early weaning and backgrounding options. Uden says the industry learned back in the early 2000’s when faced with drought, that cattle producers should not be afraid to wean the calves early. Uden believes calves can be weaned as early as 90 to 100 days, around 350 to 400 pounds. He suggests, keeping calves close by where they can be observed in the first day or two of early weaning, but he has seen these young calves respond remarkably well. Often worries come with the health of these young calves, but Uden says since they have less body weight than the typical 650 weight calf, producers are accustomed to weaning, the light-weight calves actually respond better and seem to wean quicker because they have been more independent due to the droughty conditions. These young calves have already been out there eating grass seeking feed resources. Previous experience has shown that these lightweight 3-400 pound calves can still reach the mature weights of 1,300-1,400 pounds like those weaned at heavier weights under more normal moisture and forage conditions. Uden comments one of the reasons to wean early is to save your grass resources for your cowherd. You want to focus on keeping adequate grass to carry your cows to winter range or corn stalks, and relieving the pressure of removing the calf will not put as much drain on the cow to eat enough to adequately feed that nursing calf. Some of the early weaned calves will be entering grow yards and some will go directly into feedyards and be fed out all the way explained Uden. For those looking to grow out their cattle to a heavier weight with plans to market the calves at a later date, Uden projects a gain of 1.5 to 1.6 pounds/day is good to aim for. This is similar to what the calves would have been gaining if they remained on the cow, and it gives the calf the opportunity to grow, yet not be overfed. As a result of early weaning, typical fall weaning program protocol may now need to occur in the grow yard or feedyard, but still is important to conduct. As a cattle feeder, Uden is no stranger to having discussions with cow/calf producers who may be retaining ownership of their cattle either through the growing phase or all the way to market. In fact, he encourages cow calf producers, especially those who are not experienced in the selection of a grow yard or do not have that relationship in place, to ask questions. Uden suggests producers should ask the grow yards questions such as, have ever done this before (fed early weaned calves), how familiar they are with feeding light weight calves, and what type of gain you can expect. Having an open discussion with the manager of the feedyard and understanding their protocol and goals for the cattle is very important.

Cost estimates to build stackyard fence

By University of Wyoming Extension Cost estimates and benefits of fencing haystack yards to limit attracting elk and possibly decreasing brucellosis risk to cattle are described in a new bulletin from the University of Wyoming (UW) Extension. Researchers in the Department of Agricultural and Applied Economics at the University of Wyoming provide cost breakdowns for a stackyard fence that meets Wyoming Game and Fish Department (WGFD) construction recommendations. The publication is The cost of brucellosis prevention: Fencing stackyards, B-1232. The WGFD provides fencing materials where elk-cattle commingling is a concern; the producer covers installation costs. The bulletin provides total cost of materials provided by the WGFD, total tools and materials cost not provided by WGFD and estimated labor. The publication is available free on the Internet. Go to www.uwyo.edu/ces and click on Publications on the lefthand side of the page. Click search bulletins and enter B-1232 in the Publication Number field.

Trader’s Dispatch, October 2012 — Page A17

Montana Hereford Directory Anderson Ranch

406-848-2588, Emigrant, MT

Banjo Ranch

406-425-1233, Molt, MT www.banjoranch.com

Bayers Hereford Ranch

406-684-5465, Twin Bridges, MT

Holden Herefords

406-279-3301, Valier, MT

Dale Holfeldt

406-357-3785, Lloyd, MT

Hultin Polled Herefords 406-459-5937, Helena, MT

J Bar E Ranch

BB Polled Herefords

406-765-7068, Plentywood, MT

Bear Paw Herefords

406-240-9301, Deer Lodge, MT

Beery’s Land & Livestock Co

406-584-7571, Lindsay, MT

406-293-5285, Libby, MT 406-357-3216, Chinook, MT 406-773-5710, Vida, MT www.beeryherefords.com

Bergum Family Farm

406-787-5396, Culbertson, MT www.bergumfamilyfarm.com

Blue Heron Ranch

406-432-2142, Galata, MT

K & C Hereford

K.L. Slagsvold Herefords Loyning Farms

406-328-4095, Absarokee, MT

McIntosh Ranch

McKechnie Hereford Ranch 406-432-2296, Shelby, MT

Broken Pick Ranch

406-778-2393, Baker, MT

Cherry Springs Ranch

406-662-3375, Bridger, MT

Churchill Cattle Co

406-284-6421, Manhattan, MT www.churchillcattle.com

Merrimac Cattle Company 406-735-4493, Geyser, MT

MJB Ranch

406-639-2569, Lodge Grass, MT

Ned & Jan Ward Polled Herefords

307-672-3248, Sheridan, WY

Courtney Herefords

406-265-6115, Havre, MT

406-828-4480, Alzada, MT

Northern Agricultural Research Center Rafter Ranch

Curlew Cattle Co

406-832-3219, Wise River, MT

Dallas Polled Herefords

406-580-6676, Willow Creek, MT

Darrell Taylor Farms

406-590-8059, Fairfield, MT

406-287-9947, Whitehall, MT 406-368-2244, Canyon Creek, MT 406-739-4405, Fort Benton, MT

Duncan Ranch Co

406-292-3503, Joplin, MT

Reich Bros

Sand-Bayers Herefords Sidwell Ranch

406-322-4425, Columbus, MT

Snowshoe Cattle Company

Dutton Hereford Ranch

406-875-2138, Pompeys Pillar, MT

Ehlke Herefords

406-566-2313, Stanford, MT

406-288-3330, Gold Creek, MT 406-266-4121, Townsend, MT www.ehlkeherefords.com

Elings Polled Herefords 406-278-3406, Conrad, MT

Ewing Herefords

406-452-6535, Power, MT

Feddes Herefords

406-874-8200, Miles City, MT

Garrison Ranches Inc 406-835-2501, Glen, MT

WWW.THOMASHEREFORDS.COM

Make feeder calf marketing simple: Consign your calves to the annual Montana Hereford Association Feeder Calf Sale

Sidwell Ranch Bulls for Sale Private Treaty Pen of 3 heifers won their class at the National Western - Denver

Storey Hereford Ranch

7 miles south of Columbus, MT

406-580-8255, Bozeman, MT

Thomas Herefords

406-846-1370, Deer Lodge, MT

Wang Polled Hereford Ranch 406-895-2410, Plentywood, MT

Westfeeds

Guth Ranch Family

406-547-2213, Ringling, MT

thomasfamily@blackfoot.net

VISITORS ALWAYS WELCOME

406-538-8997, Moore, MT www.wichmanherefords.com

Higgins Bros

Richard & Shirley (406) 560-8122 Bruce & Tammy (406) 544-1536

Sparks Herefords

Genex Hawkeye West

406-578-2301, Wilsall, MT

Gold Creek, MT

406-778-2320, Plevna, MT

406-252-5196, Billings, MT www.westfeeds.net

406-656-9034, Billings, MT www.crinet.com

THOMAS HEREFORDS

Soulsby Hereford Ranch

406-288-3459, Gold Creek, MT www.thomasherefords.com Tim 406-570-4771, Manhattan, MT Dan 406-570-1602 Tomlinson Herefords

Fort Keogh Livestock Research

2009 Churchill Road Manhattan, MT 59741 tfeddes@msn.com Marvin Tim 406.570.4771 Dan 406.570.1602

M/D Herefords

Cooper Hereford Ranch

406-285-6985, Willow Creek, MT www.cooperherefords.com

Feddes Herefords www.feddes.com

McMurry Cattle

406-254-1247, Billings, MT www.mcmurrycattle.com

406-862-6418, Whitefish, MT www.brokenpickranch.com

Our production sale is any time you want. We sell Hereford bulls and females by private treaty. Find out more at feddes.com. Better yet, visit the ranch.

406-492-7091, Avon, MT

Brillhart Ranch Co

406-947-2511, Musselshell, MT

Modest birth, massive meat

Wichman Herefords X Lazy P Ranch

406-277-3628, Belt, MT www.xlazypranch.com

November 14, 2012 - Three Forks, Montana For more information contact the sale committee at (406) 425-1411

Brillhart Ranch Co.

Registered and commercial Herefords that will qualify for CHB Program

P.O. Box 185 Musselshell, MT 59059 406-947-2511

Wayne • Ben Beef Country Bull Sale December 5, 2012

406-322-4425 406-861-4426

Trader’s Dispatch, October 2012 — Page A18

Location: Fallon, MT

501 S. Railway Ave. - Roads will be marked. • Lunch will be available.

OWNERS:

EDWARD & ALICE ANDERSON

406-486-5794

REAL ESTATE

Edward and Alice Anderson whose address is 501 S. Railway Ave., Fallon, MT will offer the following property to the public at auction. The final bid will be subject to their approval. The Owners reserve the right to accept or reject any and all bids.

LEGAL DESCRIPTION Fallon Original Townsite, S34, T13N, R52E, Block 009 Lot 007, LT7-12. GUNS & HOUSEHOLD

Ruger bolt action rifle, Winchester shot guns, deck furniture, electric stove, electric fireplace, meat grinder, canning jars, etc.

LAWN, GARDEN & SHOP

Lawn mowers, Weed Eater, tiller, post hole digger, woodworking tools, shop tools, etc. 1988 Wilderness Cimarron 325L 33-ft. 5th wheel camper, sleeps 6.

HOUSE DESCRIPTION

1977 double wide 26-ft.x52-ft. mobile home, 3 bedrooms, 13/4 baths, propane forced air heat, central air, front and back decks, 24-ft.x32-ft. double car unattached garage with electric door openers, 12-ft.x24-ft. storage shed with electricity, 8-ft. x10-ft. shed, under ground sprinklers, root cellar ($40,000 in updates: New roof, vinyl siding, windows, carpet, flooring, cupboards, new appliances, new decks). All appliances stay with house.

Apply for 2013 scholarships at MSU

Montana High school seniors who plan to attend Montana State University in the fall of 2013 are encouraged to apply as soon as possible for scholarships through the MSU Premier Scholarship Program. The priority deadline for scholarship applications is February 1, 2013. “It’s one of my priorities to make higher education as accessible as possible,” said MSU President Waded Cruzado. “Montana high school students are the future of our state and I want to help them succeed. The benefits of a college education to one’s life and one’s career are huge.” MSU is dedicated to making it possible for Montana students to pursue higher education through scholarships such as the Premier Scholarship. Funding for this scholarship program is provided by MSU and private donors. Premier Scholarships will be awarded to incoming freshmen who are Montana residents and show academic promise based on ACT and/or SAT scores or grade point average. Financial need, leadership experience, activities, and honors may also be considered. Montana high school seniors who plan to attend MSU in the fall of 2013 are encouraged to apply as soon as possible for the Premier Scholarships, which range from a one-time $1,000 scholarship, to a $3,000 scholarship that can be renewed annually for four years. The priority deadline for scholarship applications is February 1, 2013. Scholarships will be given until funds are exhausted. The scholarships can only be applied toward tuition. Students who are awarded a renewable scholarship must maintain a grade point average of 3.0 or higher and continue to be enrolled full time. To become eligible for a Premier Scholarship, applicants must: Apply for admission to MSU. Applications are available online at https://www. msuadmissions.org/application/ To receive a paper application, please contact MSU Admissions. Make sure MSU receives their current grade point average either via the self report form (included with the application for admission) or from a transcript. Have their official ACT and/or SAT scores sent directly to MSU from the testing company. The school code for sending ACT scores is 2420. The school code for sending SAT scores is 4488. Print, complete and mail the Montana Premier Scholarship application to: MSU Admissions, P.O. Box 172190, Bozeman, MT 59717-2190 The application is available for printing at: ttp:// www.montana.edu/admissions/premierscholarship.pdf OR apply for the Montana Premier Scholarship online at: https://www.montana.edu/ admissions/premierscholarship/ MSU Admissions can be reached toll free at 888-MSUCATS

Trader’s Dispatch, October 2012 – Page A19

Trader’s Dispatch, October 2012 — Page A20

HAY AND HEIFERS FOR SALE

100 bales of 3-year-old hay. Grass/grass alfalfa mix. 800-1000 lbs.............................$25/bale Replacement quality heifers. Registered or commercial from Whistling Winds Angus Inc. Call 406-390-1471, Hingham, MT

fusonexcavation@yahoo.com

Fruit fly threatens soft fruits

By University of Idaho Extension University of Idaho Extension entomologists have confirmed the first Idaho discovery of an exotic fruit fly, the spotted wing drosophila, that can damage a wide variety of soft fruits from berries and cherries to grapes and peaches. Dylan Champagne, a Moscow homeowner, initially reported to the University of Idaho Extension Latah County office that his cherry crop was infested. After a beautiful crop of cherries last year, Champagne was disappointed to find a pest had destroyed this year’s entire crop. “When we were picking, we saw that just about every cherry had a hole in it and then we saw that the cherries had white worms in them.” His problem sounded like a typical one stemming from the cherry fruit fly. He followed the recommendations to clean up and dispose of all infested fruit that had dropped from the tree. Champagne noticed that the flies around the fruit did not look like the typical cherry fruit fly. “I saw a lot of little fruit flies when I was raking and they looked different,” he said. He turned to the web and found a description and photos of spotted wing drosophila that seemed to fit. “My hat’s off to him. He did a really good job of identifying what he had,” said Ed Bechinski, Extension integrated pest management specialist in the College of Agricultural and Life Sciences at Moscow. The news is important for Idaho orchardists, grape growers and gardeners, who will want to place traps to monitor for the pests. If spotted wing drosophila does appear, spraying or other control methods are an option, Bechinski said. Calling them vinegar, not fruit, flies is the more accurate name for Drosophila, said University of Idaho entomologist Frank Merickel, who manages the Barr Entomological Laboratory in the College of Agricultural and Life Sciences. That’s because drosophila may live on fruit, but they crave vinegar. A follow-up investigation at Champagne’s cherry tree with vinegar traps provided plenty of specimens for Merickel to confirm the spotted wing drosophila identification. Smaller than a grain of rice and a tan body with red eyes, the pest’s most identifiable feature is a single spot on each wing of males. Females lack the spot. The appearance of spotted wing drosophila in Moscow isn’t a complete shock, although it is an unwelcome surprise, Bechinski said. The imported pest, a native of China and Japan, was originally found in California in 2008, where it caused extensive damage to strawberry crops. The pest soon spread northward in 2009 to western Oregon and Washington. The pest was found in 2010 near Pendleton, Oregon. Last year it was found near Kalispell, Montana. Four years ago, researchers formed a task force to better understand the pest’s threat and predict its future distribution, Bechinski said. Mike Cooper, of the Idaho State Department of Agriculture’s Plant Industries Division, mirrored Bechinski’s thoughts on the pest. “We knew it had been found in Oregon, Washington and even Montana, so it was a matter of time before it was Idaho’s turn,” Cooper said. “I guess the good news is that this particular insect can be fairly well managed with good survey and treatment techniques, but it will require extra attention and diligence from Idaho’s fruit growers.” Given the number of pests on Champagne’s cherry tree, Bechinski suspects the pest has been in the Moscow area for a while. The task force predicted cold winter weather would largely confine the spotted wing drosophila to west of the Cascades, except for a narrow finger that reached inland along the Columbia River system to the Palouse and northwestern Montana. Gardeners or others who suspect they’ve found spotted wing drosophila are encouraged to submit them to University of Idaho Extension for examination. Bechinski asked that those who do submit samples use alcohol to preserve insects and infested fruit. No live specimens should be sent. Samples should be packaged in crush-proof containers. Samples may be sent to Frank Merickel, Barr Entomological Museum, College of Agricultural and Life Sciences, PO Box 442339, Moscow, ID 83844. Samples also may be given to county offices of University of Idaho Extension. ##### Since 1947, the U.S. government has changed its explanation of the Roswell crash four times. It remains one of the most controversial, highly publicized UFO incidents in history.

Trader’s Dispatch, October 2012— Page A21

701-872-4154

701-523-3296

www.westplains.com

701-483-8741

701-567-4505

www.stanleyequipment.com

Stanley STANLEY Equipment EQUIPMENT 701-628-2950 701-628-2950 Frontier FRONTIER Equipment EQUIPMENT 701-774-0957 701-774-0957 Glasgow Implement GLASGOW E QUIPMENT 406-228-9341 406-228-9341

NEW EQUIPMENT

Loaders, Mounts & Grapples

701-872-4154

701-523-3296

www.westplains.com

701-483-8741

STANLEY EQUIPMENT 701-628-2950 FRONTIER EQUIPMENT 701-774-0957 GLASGOW EQUIPMENT 406-228-9341

701-567-4505

www.stanleyequipment.com 1-800-568-4197

Frontier Equipment Stanley Equipment Glasgow Implement

Air Drills

Tillage, Harrows, Drills

(F) Case IH Ecolo-Tiger 2500B (B) Case IH heavy-duty bucket, #W84014 grapple. #W85244 (B) 5-Case IH disc levelers. (D) Case IH high performance #593519 bucket. #W85022 (B) 60-Case IH stealth openers, (D) Case IH bucket. #W85271 boot, tips, hard. #W84076 (D) Case IH heavy-duty bucket. (W) Case IH 1250 planter. #W85274 #W84086 (D) Case IH loader mounts for (D) Case IH ATX800 70-ft. air drill. Puma 210. #W80447 #W84052 (D) Case IH L340 loader. (D) Case IH ADX3430 air tank. #W80508 #W84046 (D) Case IH L350 loader. (B) Case IH PH800 70-ft. air drill, #W80484 Case IH ADX3430 air tank. (F) Case IH L735 loader. #W84077 #WNT846 (F) Case IH L755 loader. Sprayers #WNT882 (D) Case IH PS160 suspended (D) Case IH L755 loader. sprayer. #W81035 #W80566 (D) Case IH 4430 sprayer. (D) Case IH L755 loader. #W81016 #W80567 (D) Case IH 4430 sprayer. (D) Case IH L755 loader. #W81029 #W80569 (W) Case IH 4430 sprayer. (D) Case IH L755 loader. #W81030 #W80570 (D) Case IH L755 loader. Combines #W80571 (B) Case IH 8230 (demo unit) (F) Case IH L760 loader. #W82196 #WNT780 (D) Case IH 8230 (demo unit) (D) Case IH L765 loader. #W82202 #W80572 (B) Case IH 8230 #W82206 (D) Case IH L765 loader. (H) Case IH 8230 #W82210 Skidsteers #W80580 (F) Case IH 8230 (demo unit) (F) Case SV250 #WNM362 (D) Case IH L775 loader. (F) Case SV250 #WNM363 #WNC591 #W80464 (D) Case IH 9230 #W82216 (F) Case SV250 #WNM364 (H) Case IH weld on adapter (F) Case SV250 #WNM365 (B) Case IH 9230 #W82217 brackets. #W85276 (B) Case IH 3rd mid mount remote. #593608 (W) Case IH front frame set for U105. #W85096 Frontier Equipment Stanley Equipment (H) Case IH snap coupler. Glasgow Implement #W85248

USED EQUIPMENT

Sprayers & Fertilizer Applicators

Tractors

(H) Case IH Farmall 35B #W80448 (W) Case IH Farmall 40B #W80500 (W) Case IH Farmall 45A #W80264 (W) Case IH L530 loader. #W80326 (H) Case IH Farmall 50B #W80497 (H) Case IH L350 loader #W80483 (F) Case IH Farmall 75C #WNT886 (W) Case IH 105U FWA. #W80473 (D) Case IH 110 Limited FWA, 69 hours. #W80487 (D) Case IH 125 Pro FWA, 160 hours. #W80472 (H) Case IH Maxxum 140 FWA. #W80525 (D) Case IH Puma 215 FWA. #W80403 (D) Case IH L780 loader. #W80370 (D) Case IH 190 Magnum FWA, 160 hours. #W80437 (D) Case IH 315 Magnum FWA, 200 hours. #W80474 (F) Case IH 550 4WD. #WNT889 (B) Case IH 550 4WD. #W80595

Tractors

(H) 2003 Summers Ultimate 90-ft. sprayer. (B) Flexi-Coil 5000 39-ft., 1615 tank. #47078W....... (F) 1979 Case 2390 #WUT464....................$12,000 (D) 2006 Case IH MX255 Magnum #15300W.......... . ............................................................$127,000 #53120W................................................$41,000 . ..............................................................$36,500 (B) Case 2590, 12-ft. dozer. #13032W.........$10,000 (W) 2004 Summers Ultimate 90-ft. sprayer. (F) Flexi-Coil 5000 #WUD090.....................$40,000 (F) 2004 Case IH DX33 FWA, LX114, 716B front (F) 2011 Case IH 260 Magnum #WUT586$180,000 snowblower. #WUT569...........................$24,000 (W) 2011 Case IH 260 Magnum#15316W.$180,000 #53151W................................................$24,000 (D) 1995 Flexi-Coil 5000 51-ft., 3450 tow between tank. #47101W........................................$55,000 (D) 2008 Case IH 105U FWA, L730 loader. (D) 1988 Ford TW25 FWA, dozer blade. #16100W... (D) Summers Ultimate 90-ft. sprayer. #53154W...... . ..............................................................$26,000 #15323W................................................$51,000 . ..............................................................$23,000 (W) Concord 3212, 2400 tank. #47131W....$30,000 (W) 2007 Summers Ultimate 100-ft. sprayer. (F) Concord 3612, 2000 air tank. #WUD080$32,950 (F) 2004 Case IH MXM120 FWA. #WUT587............. (W) 1978 Ford 9700, Schwartz loader. #16096W..... . ..............................................................$12,500 . ..............................................................$45,000 #53145W................................................$24,000 (D) 1994 Concord 4010, 2000 air tank, NH3. CIH2002 Farmall 40, W80137 .................................. NEW New Holland TV140 bidirectional. (B) Summers Trail Boom 100-ft. sprayer. #53089W. #47090W................................................$35,000 (D) 2004 Case IH MXM120 FWA. #15331W.$51,000 (D)(F) w/CIH 1010 30’ Hd, WUH320 ............................. $8,000 Combines & Headers Skid Steers (W) CIH Farmall 60, W80170 ................................. NEW #WUT320...............................................$59,370 (F) 2000 Case IH MX120 FWA, L655 loader. . .................................................................$4000 (D) 1997 Concord 4010, 3400 tank. #47137W. . ....... w/CIH 1042 36’ Cpr Hd, WUH323 ................... $22,000 (W) 632 Bobcat, 20018W ........................................ $7,250 (D) CIH Farmall 95, W80193 .................................. NEW (B) 670 Cat w/SP36 HB Dpr Hd, 25002W ............ $190,000 New Holland TV145 bidirectional. #WUT613...............................................$40,000 (B)(H) (F) 2001 Case IH 4260 90-ft. sprayer. #WUY212...... . ..............................................................$42,000 CIH 2006 Farmall 95, W80189 .................................. NEW (W) NH TR95 w/971 NH 25’ Hd, 24114&2114A ..... $7,000 (F) CIH 6088, WUH312 ....................................... $215,000 (H) 642B Bobcat w/Bkt, 20124W ........................... $7,500 #16117W................................................$88,000 (W) 2010 Case IH Maxxum 125 FWA. #15313W..... . ..............................................................$90,000 (W) Case IH 4012, 2300 tank. #47133W. . ....$44,000 Frontier Equipment Stanley Equipment (F) CIH 7010 w/36’ Grain Belt Hdr, WUH297 ..... $310,000 (H) 743 Bobcat w/o Bkt, 20101W ............................ $8,500 (D) CIH 95U FWA, W80138 ..................................... NEW (D) (2) NH TR98 w/994 36’ Dpr, 971 PU Hd, Glasgow Implement 8010, WUH172 ........................................ $196,000 (B) S130. ..............................................................$75,000 New W80160 Holland TV6070 bidirectional. (D) 2001or 24026W Flexi-Coil 67XL suspended boom (F) (D)CIH Case IH 4812, 3400 air tank. #47134W.$50,000 Bobcat w/o Bkt, 20112W ....................... $18,995 (D)(B) CIH2009 105U FWA, .................................. NEW 24025W ....................................................... $101,100 Frontier90-ft. Equipment Stanley Equipment (F) 8010, WUH232 ....................................... $280,000 Bobcat, 20083W ....................................... $19,000 Puma 125 FWA, W80053 ........................ NEW #16084W..............................................$110,000 (F) 2011 Case IH 125 Maxxum FWA, Case IH L750 (B) CIH #53138W...................................$18,000 (D)CIH 2006 Case IH SDX40, 3380 tow between tank.(D) 753 (D)sprayer. NH TR66 w/36’ 960 MacDon Glasgow Dpr Hd,Implement 8010, 23075W ........................................ $265,000 (H) 753loader. Bobcat, 20085W ....................................... $12,000 Ldr,Holland W85038 ...................................... NEW &28019W .............................................. (F) w/L750 2008 New T7030 FWA, 860TL loader. #WUT616....................................$79,000 (D) New2009W Holland SF115 114-ft. wheeled$64,000 boom (D) CIH #47118W..............................................$100,000 (D) CIH 8010, 23076W ........................................ $265,000 (D) S150 Bobcat, 20120W .................................... $23,000 (W) CIH Puma 165 FWA, W80112 ...................... NEW (D)sprayer. NH TX68, 24016W ........................................... $65,000 #WUT573...............................................$85,000 (H) 2002 Case IH MX135, L300 loader. #15290W.... #53083W...................................$25,000 (W) (W)CIH 20108010, Case IH SDX40, 3430 tow behind tank. 23087W ....................................... $270,000 (D) S150 Bobcat w/BKT, BkT Bite, 20133W ....... $22,500 w/LX770 Ldr, W85140 .................................. NEW 962 Dpr Hd, 24017W ................ $28,000 2009 New210, Holland T8050 FWA. #16086W......... . ................................................................... Sold (D)(H) (D) 2006w/36’ NewMacDon Holland SF115 120-ft. wheeled boom #47136W..............................................$124,000 CIH Puma W80037 .................................... NEW (W) NH CR960, 24019W .................................... $160,000 (F) CIH 8010, WUH342 ....................................... $185,000 (D) S205 Bobcat, no Bkt, 20120W ....................... $23,000 U s e d E q u i p m e n t New Equipment . ............................................................$195,000 Case IH 20146W MXU135 FWA, Case IH LX750 #53132W...................................$25,000 (F)CIH 2011 Case IH SDX40, 3380 tow behind tank.(B) (W) 8120, WUH298 ....................................... $330,000 S2052006 Bobcat w/Bkt, ........................ $26,500 w/L770 Ldr, W85031 ...................................... NEW (F)sprayer. NH CR960, WUH370 .................................... $137,000 (F) Combines & Headers Skid Steers 2388, ........................................................... $89,900 (D) S205loader. Bobcat w/Bkt, 20142W ......................... $25,000 New #16123W. #15324W. ....................................$69,000 (F) 2008 IH 3320 90-ft. sprayer. #WUY328...... #WUD137.............................................$160,000 (F)(W) CIH2006 Scout Ut Holland Vehicle, TG285 WNM126FWA. .................... NEW....... (D) NH Case CR970, 24021W ..................................... $188,000 (S) CIH 7010 , ......................................................... $240,000 Bobcat, WUT322 ...................................... $19,000 72” Finish Mwr, W85133 ....................... NEW . ............................................................$123,000 (D) 2011 Case IH 140 Pro FWA, loader. #15314W... (D) CIH (F)CIH 2008 Case IH FH700 60-ft., 3380 air tank.(F) 863 (D). ............................................................$190,000 NH CR 970, 24022W .................................... $180,000 (S) CIH 7010, .................................................. $249,000 (W) 863 Bobcat, 20105W ..................................... $23,000 Dpr Hd, 24023W ....................... $47,000 (S) 08#WUD119.............................................$128,000 . ............................................................$105,000 (F) CIH SCX100 16’ Pvt Tng, WNH526 ............ NEW (F) 2008w/94C CaseNHIH42’3320 100-ft. sprayer. #WUY284.... 07 CIH 8010, .................................................. $249,000 (W) 863 Bobcat, 20136W .................................... $18,000 CIH HDX 1824x4 Agr Hd, WNH553 ................. NEW (F). ............................................................$195,000 NH CR 970, WUH324 ................................... $152,000 (S) Tractors (B) 2005 Case IH MXM175 FWA, Case IH LX172 (F) (B)062011 Case IH FH700 70-ft., 3580 tow behind air(D) S330 , .................................................. $220,000 (S) CIH 8010 w/80” Bkt, 20094W ................... $43,000 Bobcat (W) CIH WD1203 Swthr, W83050 ....................... NEW (W) NH CR9070, 24027W ................................. $270,000 (H) 1995 Case IH 9270, Degelman dozer. loader. #15321W. . ...................................$81,500 (H) 2008 Case IH 3320 sprayer. #53134W.$180,400 tank. #47139W. . ....................................$196,000 (W) CIH RB564 Rnd Blr, AW,TW, W83013 ........ NEW (D) NH CR 9070, 24024W ................................. $260,000 (S) MF 860, UC550 ..................................................... $9,500 (W) LS160 NH Skid 20109W ............................. $19,000 #15326W..................................................... 2 Honeybee Hds, SD440 .............................. (D) 2010 Puma 140, Case IH$10,000 L760 loader. (W) CIH (F) IH 3330 100-ft. sprayer. #WUY362.... (W) 2006 NewSP36 Holland 57-ft., $59,500 SC230 air(D) 1825 CaseCase SkidIH w/Bkt, 20128W .................... RB564 Rnd Blr, Ele Twn Nt, W83014 .. NEWSold (S)2010 NH Case CR9070, 24035W .................................... $249,000 (S) PT Swthr, UC558 ......................... $8,500 (D) 1825B Case Skid w/Bkt 20129W ................. $14,000 CaseSPIH 9370, Leon 16-ft. dozer. (W)(F) CIH1997 SPX3330 Spryr, W85098 ............... NEW #15305W..............................................$115,000 . ............................................................$235,000 tank.8230 #47053W. .......................................$90,110 w/NH 94C 42’ Dpr Hd, 24036W ....................... $42,000 (S) CIH CaseCase SkidIH w/Bkt, 20127W SPX3330 SP Spryr, WNH585 ................ NEW #WUT561...............................................$70,000 (W) JD Case 9600,IH 22004W $52,000 (S) CIH 8120, UC564 ........................................... $299,000 (D) 1845 (D) 2010 Puma 155,................... Case IH$14,000 L760 loader. (F) CIH (F) 2005 4410............................................. 100-ft. sprayer. #WUY364.... ............................................. $69,500 (F) 420 SSL Case Skid, WUT324 ..................... $23,000 (W)(F) CIH SRX160 134’ Wld Boom Spryr,.......$95,000 W85043 (W) JD 9600, 22011W ............................................. $49,000 (S) CIH 2188, UC565Combines 2001 Case IH STX375H #WUT598. . ............................................................$160,000 MacDon 973 Hd, UC566 .............................. $29,500 (F) 435 #15307W..............................................$130,000 SSL Case Skid, WUT341 ..................... $35,000 ................................................................................. NEW (W) JD 9650 w/930R JD Hdr, 22007W,22009W .. $123,500 (S) 2010 Case IH 435 #15319W................$233,500 (F)CIH 20102188, CaseUC572 IH 8120 #WUH519.............$279,000 (H) 2009 IH Puma 180 #15240W.....$114,000 (F)(H) (D) 2008 Case IH SPX4420 sprayer. #53121W........ (S) ............................................. $85,000 (D) 440 Case Case Skid w/Bkt, 20125W ...................... $34,000 CIH 8120 Combine, WNC432 ......................... NEW (F) JD STS 9660, WUH346 .................................. $31,000 PostIH Diggers 2010 Case IH 435 W82055 #15317W. ...............$238,000 8120 #WUH544.............$325,000 (H) Case IH L770 loader. #56061W.............$11,500 (D)(H) . ................................................................... Sold (F) 2011 Case CIH 8120 Combine, .......................... NEW w/936D JD Dpr, WUH261 ................................. $29,000 (S) NH 94C Hd, ..................................................... $45,000 (D) 440 C3 Case Skid w/Bkt, 20130W .............. $36,000 (F) 2005 Case IH STX450 #WUT617. ........$170,000 (F)Honeybee 2011 Case IH 2162 draper head. #WUH545. 42GB Hd,flex ................................... $65,000 (D) 2008 Case IH Puma 180, Case IH L770 loader. (D) 60XT Case Skid w/Bkt, 20131W ................. $22,000 (F) 2011w/635F CaseJD,IHWUH262 4420 100-ft. sprayer. #WUY329.... (W) CIH 8120 Combine, W82076 ......................... NEW ........................................ $35,000 (S) Misc Grain Augers & Vacs 42GB Hd, ................................... $71,000 (D) Skat#15329W..............................................$108,000 Trak 1500D Skid, 20088W .............. $17,000 2004 Case IH STX450 Quad #15312W. ............. . ..............................................................$75,000 W82078 ......................... NEW (W)(D) CIH 8120 Combine, (D). ............................................................$267,000 9760 JD w/36D Dpr Hd w/Fgr Rl, 22015W .... $231,000 (S) Honeybee Lawn & Garden 963IH Hd8120 , ......................... Call for Pricing (D) 4800 Magnatrac w/Bkt, , 20111W $6,000 (W) CIH 8120 Combine, W82080 ......................... NEW (W) 1680 CIH, ......................................... $30,000 . ............................................................$160,000 (D)MacDon 2010 Case #23221W. .............$243,000 (D) 2008 Case IHSkid Puma 195Dzr #15192W.....$108,000 (D) 2010 Case IH23022W 4420 120-ft. sprayer. #53146W. .... (S) D60 Hd, .......................................... $61,000 CIH 2142 35’ Drpr W82057 ................... NEW Postloader. Diggers (B). ............................................................$270,000 1680 CIH, 23057W ........................................... $29,000 (S) 2011 Case IH 485Hd, #15322W. ...............$260,000 (F)MacDon 2011 Case IH 8120 #WUH550.............$292,000 (D) Case IH L760 #56063W................$7500 (B)(D) (B) CIH 2152 35’ Dpr Hd, W82024 ..................... NEW (H) 1680 CIH, 23058W .......................................... $38,000 (S) Hondybee 40GB Hd, ..................................... 59,000 (H) 3pt F8 Danuser Post Dgr, 52027W ............... $850 2008 Case IH 535 HD #15269W..........$245,000 (B)Honeybee 2011 Case IH ,8120 #23265W. .............$284,000 2011 Case IH Puma 230, Case IH L770 loader. (D)(H) (F) 2011 Case IH 4420 120-ft. sprayer. #WUY356.... (S) 3655 ............................ Call for Pricing (W) (B) CIH 2152 40’ Drpr Hd, W82062 ................... NEW (W) 1688 CIH, 23050W ......................................... $45,000 3pt F8 Danuser Post Dgr, 52030W .............. $800 2008 Case IH 535Hd, #15309W. ...............$232,000 (B)3 CIH 20111010 CaseHds IH, .......................... 2162 40-ft.Call flex for draper head.(B) McMillin #15325W..............................................$155,000 . ............................................................$274,000 Pricing (D)(H) CIH 2152 40’ Drpr W82065 ................... NEW (W) 1688 CIH, 23082W ......................................... $50,000 (S) Hyd Post Dgr, 52022W .............. $1,295 CR960, .................................................... $180,000 2008 Case IH 535Hd, #15310W. ...............$232,000 #23266W................................................$67,900 (F) 2007 Case IH 215 Magnum #WUT485$116,000 (D)(H) (W) 2008w/1015 Case IHPU4420 120-ft................................ sprayer. #53157W. ... (S) NH CIH 2152 40’ Drpr W82050 ................... NEW CIH Hd, 23084W $7,000 Misc Grain Augers & Vacs 2152 45’IH Drpr W82074 ................. NEW 2010 Case 535 Hd, Quad #15274W......$331,000 IH 8120 #23267W. .............$284,000(H) C1000SR (F) 2011 Case IH Roller, 245 Magnum #WUT593$158,000 (W)(F)CIH (B). ............................................................$219,000 CIH 2188, 23046W ........................................... $47,500 (B) 2011 Case Swath 520354W ................. $750 w/16HP Briggs, 51034W $2,100 ... (H) 2011 Case IH 245 Magnum #15292W.$180,500 (D) CIHCase 2188IH w/30’ CIH120-ft. 1010 Hdr, 23099W #WUY357.... & 23100W ........ (W) (D) 2010 Case IH 535 Quad #15276W......$331,000 (B)7x36 2011Westfield Case IH 2162 40-ft. flex head........ #23268W. (F) 2012 4430 sprayer. Lawn & Garden Westfield w/220v Elec Mtr, 51053W ....... $2,500 ........................................................................... $12,000 (D) 7x51 . ..............................................................$67,900 (D) 2005 CaseTractor IH MX255 Magnum #15259W.......... (F) 2009 Case IH 535 Quad #WUT605.....$292,000 . ............................................................$298,000 (D) 425 JD Lawn w/54” Mwr, 51” Brm, (D) 8x41 Westfield, 51016W .................................. $4,500 (H) CIH 2188, 23109W .......................................... $40,000 (D) 2010 Case IH 9120 #23215W..............$335,000 (F) 2011 Case IH 600 Quad #WUT607.....$400,000 . ............................................................$115,000 (B) 2012 Case IH 4430 120-ft. sprayer. #53155W..... 19015W ................................................................. $6,950 (W) CIH 2188, 23111W ......................................... $85,000 (D) 8x46 Westfield, 51055W .................................. $3,500 (B) 2011 Case IH 600 Quad #15327W......$395,000 (D)8x52 2008 MacDon51058W D60............................... 45-ft. draper head.(F) 718K Grasshopper Lawn Tractor, SC Brandt, $2,100 (B). ............................................................$320,000 CIH 2388, 23018W ........................................... $90,000 (B) Miscellaneous $5,000 WUM534 .............................................................. (F) 2012 Case IH 600 Quad #WUT618.....$410,000 #28086W................................................$60,000 (F) 4430 ......................................... 120-ft. sprayer. #WUY360.... 8x51 Westfield Swg Agr, 51057W ... $2,500 (B)2012 CIHCase 2388,IH23047W $100,000 (D) MK Lawn& Tractor, 51054W $5,000 (D) 721 Grasshopper Swg Agr,.............$340,000 (D) 1985 Versatile 836 #16119W.................$25,000 (D)MK100x51 2010 CaseWestfield IH 9120 #23216W. (F). ............................................................$297,000 CIH 2388 w/1015 Hdr, WUH211 .................... $142,000 (D) Tractors Crawlers ............................................................... $11,500 Speedking PTO Belt $7,100 (W) CIH 2388 w/30’ Hdr,sprayer. 23066W &23067W ............... (D) (W) 1990 Versatile 846 #16122W................$32,000 (D)30’2008 MacDon D60 Cvyr, 45-ft.51036W draper head. (W)19016W 1978 International 270A backhoe. #15246W.... (D) 2005 Wilmar 85001010 90-ft. #53110W........ Grizzly Dixon Lawn Mower, Brandt Cnvyr, 51010W ............. $12,500 (B) ZTR. ..............................................................$11,500 ........................................................................... $97,400 (W) 1535LP (W) 2010 Buhler 435 #16124W.................$179,000 #28087W................................................$60,000 . ..............................................................$90,000 19013W ................................................................. $6,500

Used Equipment

(B) 670 Cat w/SP36 HB Dpr Hd, 25002W ............ $190,000 (W) NH TR95 w/971 NH 25’ Hd, 24114&2114A ..... $7,000 (D) (2) NH TR98 w/994 36’ Dpr, 971 PU Hd, 24025W or 24026W ....................................................... $101,100 (D) NH TR66 w/36’ 960 MacDon Dpr Hd, 2009W &28019W .............................................. $64,000 (D) NH TX68, 24016W ........................................... $65,000 w/36’ MacDon 962 Dpr Hd, 24017W ................ $28,000 (W) NH CR960, 24019W .................................... $160,000 (F) NH CR960, WUH370 .................................... $137,000 (D) NH CR970, 24021W ..................................... $188,000 (D) NH CR 970, 24022W .................................... $180,000 w/94C NH 42’ Dpr Hd, 24023W ....................... $47,000 (F) NH CR 970, WUH324 ................................... $152,000 (W) NH CR9070, 24027W ................................. $270,000 (D) NH CR 9070, 24024W ................................. $260,000 (S) NH CR9070, 24035W .................................... $249,000 w/NH 94C 42’ Dpr Hd, 24036W ....................... $42,000 (W) JD 9600, 22004W ............................................. $52,000 (W) JD 9600, 22011W ............................................. $49,000 (W) JD 9650 w/930R JD Hdr, 22007W,22009W .. $123,500 (F) JD STS 9660, WUH346 .................................. $31,000 w/936D JD Dpr, WUH261 ................................. $29,000 w/635F JD, WUH262 ........................................ $35,000 (D) 9760 JD w/36D Dpr Hd w/Fgr Rl, 22015W .... $231,000 (W) 1680 CIH, 23022W ......................................... $30,000 (B) 1680 CIH, 23057W ........................................... $29,000 (H) 1680 CIH, 23058W .......................................... $38,000 (W) 1688 CIH, 23050W ......................................... $45,000 (W) 1688 CIH, 23082W ......................................... $50,000 w/1015 CIH PU Hd, 23084W ............................... $7,000 (B) CIH 2188, 23046W ........................................... $47,500 (D) CIH 2188 w/30’ CIH 1010 Hdr, 23099W & 23100W ........ ........................................................................... $12,000 (H) CIH 2188, 23109W .......................................... $40,000 (W) CIH 2188, 23111W ......................................... $85,000 (B) CIH 2388, 23018W ........................................... $90,000 (B) CIH 2388, 23047W ......................................... $100,000 (F) CIH 2388 w/1015 Hdr, WUH211 .................... $142,000 (W) CIH 2388 w/30’ 1010 Hdr, 23066W &23067W ............... ........................................................................... $97,400 (F) CIH 2588, WIH319 ......................................... $195,000

w/CIH 1010 30’ Hd, WUH320 ............................. $8,000 w/CIH 1042 36’ Cpr Hd, WUH323 ................... $22,000 (F) CIH 6088, WUH312 ....................................... $215,000 (F) CIH 7010 w/36’ Grain Belt Hdr, WUH297 ..... $310,000 (F) CIH 8010, WUH172 ........................................ $196,000 (F) CIH 8010, WUH232 ....................................... $280,000 (D) CIH 8010, 23075W ........................................ $265,000 (D) CIH 8010, 23076W ........................................ $265,000 (W) CIH 8010, 23087W ....................................... $270,000 (F) CIH 8010, WUH342 ....................................... $185,000 (F) CIH 8120, WUH298 ....................................... $330,000 (S) CIH 2388, ........................................................... $89,900 (S) CIH 7010, ......................................................... $240,000 (S) 08 CIH 7010, .................................................. $249,000 (S) 07 CIH 8010, .................................................. $249,000 (S) 06 CIH 8010, .................................................. $220,000 (S) MF 860, UC550 ..................................................... $9,500 (S) 2 Honeybee SP36 Hds, .............................. $59,500 (S) CIH 8230 PT Swthr, UC558 ......................... $8,500 (S) CIH 8120, UC564 ........................................... $299,000 (S) CIH 2188, UC565 ............................................. $69,500 (S) MacDon 973 Hd, UC566 .............................. $29,500 (S) CIH 2188, UC572 ............................................. $85,000 (S) NH 94C Hd, ..................................................... $45,000 (S) Honeybee 42GB Hd, ................................... $65,000 (S) Honeybee 42GB Hd, ................................... $71,000 (S) MacDon 963 Hd, ......................... Call for Pricing (S) MacDon D60 Hd, .......................................... $61,000 (S) Hondybee 40GB Hd, ..................................... 59,000 (S) Honeybee 3655, ............................ Call for Pricing (S) 3 CIH 1010 Hds, .......................... Call for Pricing (S) NH CR960, .................................................... $180,000

(W) 7x36 Westfield w/16HP Briggs, 51034W ....... $2,100 (D) 7x51 Westfield w/220v Elec Mtr, 51053W ....... $2,500 (D) 8x41 Westfield, 51016W .................................. $4,500 (D) 8x46 Westfield, 51055W .................................. $3,500 (B) 8x52 SC Brandt, 51058W ............................... $2,100 (D) MK 8x51 Westfield Swg Agr, 51057W ... $2,500 (D) MK100x51 Westfield Swg Agr, 51054W $5,000 (D) 30’ Speedking PTO Belt Cvyr, 51036W $7,100 (W) 1535LP Brandt Cnvyr, 51010W ............. $12,500 (W) 1026 REM Grain Vac, 52096A ................. $6,500

(W) 632 Bobcat, 20018W ........................................ $7,250 (H) 642B Bobcat w/Bkt, 20124W ........................... $7,500 (H) 743 Bobcat w/o Bkt, 20101W ............................ $8,500 (B) S130 Bobcat w/o Bkt, 20112W ....................... $18,995 (D) 753 Bobcat, 20083W ....................................... $19,000 (H) 753 Bobcat, 20085W ....................................... $12,000 (D) S150 Bobcat, 20120W .................................... $23,000 (D) S150 Bobcat w/BKT, BkT Bite, 20133W ....... $22,500 (D) S205 Bobcat, no Bkt, 20120W ....................... $23,000 (B) S205 Bobcat w/Bkt, 20146W ........................ $26,500 (D) S205 Bobcat w/Bkt, 20142W ......................... $25,000 (F) 863 Bobcat, WUT322 ...................................... $19,000 (W) 863 Bobcat, 20105W ..................................... $23,000 (W) 863 Bobcat, 20136W .................................... $18,000 (D) S330 Bobcat w/80” Bkt, 20094W ................... $43,000 (W) LS160 NH Skid 20109W ............................. $19,000 (D) 1825 Case Skid w/Bkt, 20128W .................... $10,000 (D) 1825B Case Skid w/Bkt 20129W ................. $14,000 (D) 1845 Case Skid w/Bkt, 20127W ................... $14,000 (F) 420 SSL Case Skid, WUT324 ..................... $23,000 (F) 435 SSL Case Skid, WUT341 ..................... $35,000 (D) 440 Case Skid w/Bkt, 20125W ...................... $34,000 (D) 440 C3 Case Skid w/Bkt, 20130W .............. $36,000 (D) 60XT Case Skid w/Bkt, 20131W ................. $22,000 (D) Skat Trak 1500D Skid, 20088W .............. $17,000 (D) 4800 Magnatrac Skid w/Bkt, Dzr, 20111W $6,000 (H) 3pt F8 Danuser Post Dgr, 52027W ............... $850 (W) 3pt F8 Danuser Post Dgr, 52030W .............. $800 (B) McMillin Hyd Post Dgr, 52022W .............. $1,295 (H) C1000SR Swath Roller,

520354W .................

(D) 425 JD Lawn Tractor w/54” Mwr, 51” Brm,

$750

19015W .................................................................

$6,950

WUM534 ..............................................................

$5,000

(F) 718K Grasshopper Lawn Tractor, (D) 721 Grasshopper Lawn Tractor,

(D) CIH Farmall 40, W80137 .................................. NEW (W) CIH Farmall 60, W80170 ................................. NEW (D) CIH Farmall 95, W80193 .................................. NEW (B) CIH Farmall 95, W80189 .................................. NEW (D) CIH 95U FWA, W80138 ..................................... NEW (D) CIH 105U FWA, W80160 .................................. NEW (B) CIH Puma 125 FWA, W80053 ........................ NEW w/L750 Ldr, W85038 ...................................... NEW (W) CIH Puma 165 FWA, W80112 ...................... NEW w/LX770 Ldr, W85140 .................................. NEW (D) CIH Puma 210, W80037 .................................... NEW w/L770 Ldr, W85031 ...................................... NEW (F) CIH Scout Ut Vehicle, WNM126 .................... NEW (D) CIH 72” Finish Mwr, W85133 ....................... NEW (F) CIH SCX100 16’ Pvt Tng, WNH526 ............ NEW (F) CIH HDX 182 Agr Hd, WNH553 ................. NEW (W) CIH WD1203 Swthr, W83050 ....................... NEW (W) CIH RB564 Rnd Blr, AW,TW, W83013 ........ NEW (W) CIH RB564 Rnd Blr, Ele Twn Nt, W83014 .. NEW (W) CIH SPX3330 SP Spryr, W85098 ............... NEW (F) CIH SPX3330 SP Spryr, WNH585 ................ NEW (W) CIH SRX160 134’ Wld Boom Spryr, W85043 ................................................................................. NEW (F) CIH 8120 Combine, WNC432 ......................... NEW (D) CIH 8120 Combine, W82055 .......................... NEW (W) CIH 8120 Combine, W82076 ......................... NEW (W) CIH 8120 Combine, W82078 ......................... NEW (W) CIH 8120 Combine, W82080 ......................... NEW (B) CIH 2142 35’ Drpr Hd, W82057 ................... NEW (B) CIH 2152 35’ Dpr Hd, W82024 ..................... NEW (D) CIH 2152 40’ Drpr Hd, W82062 ................... NEW (D) CIH 2152 40’ Drpr Hd, W82065 ................... NEW (D) CIH 2152 40’ Drpr Hd, W82050 ................... NEW (W) CIH 2152 45’ Drpr Hd, W82074 ................. NEW

19016W ............................................................... $11,500

(B) ZTR Grizzly Dixon Lawn Mower,

19013W .................................................................

$6,500

(F) CIH 2588, WIH319 ......................................... $195,000 (W) 1026 REM Grain Vac, 52096A

.................

$6,500

New Equipment

Trader’s Dispatch, October 2012 — Page A22

NH Bale Wagons & Retrievers FOR SALE & WILL PURCHASE

Sod Buster Sales, Inc.’s Farm Equipment Finding Service — Phone (406) 883-2118

PICKUP FOR SALE 2002 Ford F250 Super Duty AT V10, club cab, short box. Phone 406-799-6923

Immature switchgrass could help cellulosic ethanol industry

By Ann Perry, Agricultural Research Service growth phase. Because of these changes, A gene that keeps switchgrass forever the sugars making up the plant starch are young could have far-reaching implicamore readily available for conversion into tions for the development of the plant as a cellulosic ethanol. biofuel crop, according to U.S. Department According to Agricultural Research of Agriculture (USDA) scientists. Service (ARS) geneticist Sarah Hake, the Inserting a specific gene called “cornstarch in these transgenic plants stays inside grass” from corn into switchgrass essentialthe stem because it isn’t needed elsewhere ly keeps the perennial grass in its juvenile for nourishing flower buds and blossoms. form—a plant that doesn’t flower, doesn’t As a result, starch levels can increase as produce seeds, and doesn’t have a dormant much as 250 percent, which increases the sugars that can be fermented into ethanol. Hake, director of the ARS Plant Gene Expression Center in Albany, California, teamed with University of CaliforniaBerkeley plant geneticist George Chuck to conduct this investigation. ARS is USDA’s chief intramural scientific research agency, and this work supports the USDA priority of developing new sources of bioenergy. The scientists observed that the leaves in the transgenic switchgrass are not nearly as stiff as leaves in switchgrass cultivars that haven’t been modified. In addition, they determined that leaf lignin is slightly different in the transgenic switchgrass than leaf lignin in other plants. This could lead to new findings on how to break down the sturdy lignin and release sugars for fermentation, a development that will be essential to the commercial production of cellulosic ethanol. The researchers are now introducing DNA segments called genetic promoters that would “turn on” the expression of the corngrass gene just in aboveground switchgrass shoots. This could help increase root mass development that otherwise would be inhibited by the gene. Hake and Chuck also suggest that developing nonflowering switchgrass varieties would eliminate the possibility of cross-pollination between transgenic switchgrass cultivars and other switchgrass cultivars. Results from this work were published in 2011 in Proceedings of the National Academy of Sciences. ##### “My grandfather was the consummate storyteller,” said Win. “He was a large man, weighing in at about 400 pounds, but that was made up mainly of heart and soul. The four of us sisters would sit at this feet for hours and listen to his tales. How I wish I had a recording of them now...They died with him, and all I have now are the memories. I have made a vow to be a storyteller to my grandchildren. I may not be as good as my grandpa was, but I’m going to give it a shot.”

Fall feral hog webinar series set

Trader’s Dispatch, October 2012 — Page A23

The eXtension Feral Hogs Community of Practice will conduct a feral hog educational webinar series this fall for anyone needing information on this growing problem, said the webinar’s coordinator. “Despite all the control efforts and the public’s awareness of the issue, feral hog numbers in the state continue to rise at an alarming rate,” said Jared Timmons, AgriLife Extension Plum Creek Watershed Feral Hog Education Program assistant at San Marcos. “The purpose of this series is to provide the public with the most current feral hog-related facts available in such a way that participants can interact with the experts from anywhere as long as they have Internet access.” The Feral Hogs Community of Practice is a resource area within eXtension concentrating on the control, adaptive management, biology, economics, disease risks, and the human interface of feral hogs across the U.S., Timmons said. Its goal is to provide critical information, resources and expert application of knowledge. To join the webinars, log in as a “guest” to: https://connect.extension.iastate.edu/feralhog. There is no charge for the series. The four sessions are from noon-1 p.m. Central Time. The remaining session dates, topics and speakers include: • October 23, Control Techniques and Managing Feral Hog Populations, Dr. Billy Higginbotham, AgriLife Extension wildlife specialist, Overton. • November 20, Feral Hog Disease Issues, Dr. Joseph Corn, Southeastern Cooperative Wildlife Disease Study, College of Veterinary Medicine, University of Georgia. • December 18, Current and Future Feral Hog Research, Dr. Tyler Campbell, Feral Swine Project Leader, U.S. Department of Agriculture-Animal and Plant Health Inspection Service, National Wildlife Research Center, Florida Field Station. For more information, contact Timmons at 254-485-4886, jbtimmons@ag.tamu.edu.

• Floating Boom Design • Lightweight Aluminum Box Boom • Stainless Steel Tanks or Plastic • Many years of testing • Boom widths up to 150-ft. • Tank sizes - 1250, 1450, 2000, 3000 gallon

$ave Some Money!

I N S U R A N C E 621 1st Street West - Havre, MT 59501

Cathy Gregoire Let Gregoire Insurance Give You A Quote

LICENSED AGENT

FARM • RANCH • AUTO HOME • LIFE • HEALTH • CROP/HAIL

406-265-1818

New Besler Bale Beds with

EXTENDABLE ARMS IN STOCK

Ford 5000 2WD tractor with loader. As-is.....$3900

New DewEze bale bed Coming In

2004 GMC 3/4 ton 4x4 extended cab with 8.1L V-8, Allison automatic. Mounted with New Besler bale bed with extendable arms.

THE REPAIR SHOP

CHOTEAU, MONTANA

2007 International 4300 Allison transmission, New Sprayflex sprayer, 1500 gallon, 120-ft. booms with hydraulic steer

Phone 406-466-2955 or call cell 590-5447

1 SOLD

$133,000

1 LEFT

Will sell sprayers for your truck or complete units

MARFLEX SPRAYER PARTS AVAILABLE

GREENTRONICS

“Sprayer Boom Height Control”

RiteHeight – $3995 Early Order Discount Big Seller in Canada Easy to install – Two ultrasonic sensors and simple electrical connections. No hydraulic plumbing required.

Versatile – Maintains consistent boom height above ground or crop canopy (selectable).

BUILDING

2006 Freightliner M2 Cat engine, Allison transmission, Marflex 1300 used sprayer, 100-ft. booms, new Honda engine. Coming in - New Sprayflex Sprayer - 120-ft. & 100-ft.

Finance your new sprayer for 3.45%, 3 years!!

SPEED – CAPACITY DEPENDABILITY

2008 Marflex sprayer - 1990 Kenworth T-600 126-ft. boom, 2200 gallon tank, TANDEM axle, air ride, 3406 CAT 425 hp, 9 speed transmission. Put it in 1 gear for spraying and don’t have to shift again to turn around at the ends of the fields or go thru coulees!!! Trimble GPS 500+EZ-boom, 5 section boom. Works great if you have gopher holes or badger holes.......................................................... $89,000

Lease to own a new 2013 Sprayflex Truck @ 2.65%

BUILDING - (2) 2007 International 4300, Allison transmission, AC, CC, new 2012 Sprayflex 120-ft. sprayer, 1500 gallon tank, new tires/wheels. Both have new IHC truck warranty!.....................................................$129,000 Each 1999 Freightliner FL60 Marflex 1300 gallon tank, Cat engine, manual trans., Honda engine, 90-ft. booms, tall tires.

FOR SALE

Set of Duals for a Marflex or Sprayflex truck sprayer.... $6900

Henke Enterprises Inc. offers-

* Complete Spray Truck assembly * Truck Frame work * Hydraulic work * Welding of steel, aluminum, stainless steel * Machining - lathe work (18”x80”) and milling * Custom built wheels for floaters & etc. - Powder Coated * Crane truck work 50-ft. of height * Electronic testing and repairs * Over 20 years experience with Marflex-SprayFlex sprayers * All sprayers tested on our irrigated and dryland farm

Contact your authorized dealer

Henke Enterprises Inc., Doug Henke, Chester, MT

• 406-759-5877 or cell 406-799-2616

email: grain@ttc-cmc.net

Trader’s Dispatch, October 2012 — Page A24

FARM EQUIPMENT FOR SALE

Spra-Aire 72-ft. sprayer............................................ $2500 Allis-Chalmers WD45 tractor, Farmhand F11 loader, back blade, newer tires.................................................. $4000 Lockwood rock/potato picker................................... $1000 John Deere 12-volt chemical pump............................ $400 10-International suitcase style tractor weights. Each.. $40 Call Herb Bingham 406-469-2250, Pendroy, MT

200 FANCY BLACK BRED HEIFERS FOR SALE

Bred to black bulls sired by Mytty in Focus, Travelers 6807, Emolation–N–Bar, Sitz Traveler 8180 and Leachman Right Time. Bulls were in 65 days – Gate cut – $1750 each Contact Brad Hobson, 406-370-9951

Reserve Champion Market Lamb shown by Shelbie Teeters at Wibaux County Fair held August 23-26 in Wibaux, Montana. Photo courtesy of Renee Nelson.

Leaf dropping sugar maple

So, you think you’re

pretty fast.

The Grainvac 7500 HP is up to any challenge. When it’s time to move huge volumes of grain, nothing out-hustles the GrainVac 7500 HP. Brandt’s breakthrough technology delivers high capacity and high efficiency – with lower horsepower requirements and low-cost, easy maintenance. So if you’ve got a need for speed, see the GrainVac 7500 HP at your local Brandt dealer. That’s powerful value, delivered.

$500 Rebate on GrainVac 5200EX or 7500HP Some restrictions apply. Offer valid until October 31, 2012.

Visit thanksabillion.ca for rebate details and other offers. For product details and a dealer near you, call 1-866-4BRANDT or visit www.brandt.ca

By Ron Smith, Horticulturist, NDSU Extension Service Q: Large numbers of leaves are falling from my sugar maple. The leaves appear to be snipped off along the stem. What could be causing this? I can’t see any pests. A: There could be several reasons for the leaf drop. The most likely candidates are leaf stalk or petiole borers. Both insects burrow into the leaf petiole in the spring and cause the leaves to fall. The larvae remain in the leaves when they fall to the ground. They burrow into the ground and remain dormant until the following year. Water stress is another possibility. A spring full of generous rain showers, which suddenly is followed by elevated temperatures and no water for a couple of weeks or more will cause stress. From your description, it sounds like it might be the leaf petiole borers causing the problem. In either pest case, you have nothing to worry about because they usually stop as the summer comes on. The result is more cosmetic than threatening to the tree. I’d appreciate knowing where it is you live because it would give me some sort of clue as to what else might be causing your problem. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu. edu.

Trader’s Dispatch, October 2012 — Page A25

We Rent Equipment!

Heavy Harrows, Vertical Tillage, Self Propelled Sprayers & Fertilizer Spreaders

Fertilizer Spreaders

• 8 ton Liberty • Tandem axle • Mild or stainless steel • Dual spinners Buy or Lease To Own

$3898/yr - oac

• 10 ton truck mount • ‘07 Peterbilt 335 • Flotation tires • Raven Envisio Pro Buy or Lease To Own

$14,823/yr - oac

2800 Balebuster Bale processors

• 12 ton Magna spread • Stainless steel • Advanced technology for the most sophisticated farmer Buy or Lease To Own

$9979/yr - oac

Manure Spreaders

Only 90 hp required

• Feed square or round bales • Live floor • Twine protection Buy or Lease To Own

$6499/yr - oac

• M390 • 390 bushel • Optional top beater • Standard hydraulic drive Buy or Lease To Own

$3712/yr - oac

USED Alloy Aluminum Grain Trailer

• M435 • 435 bushel • Optional top beater • Optional 1000 rpm PTO Buy or Lease To Own

$3898/yr - oac

New 2012’s Just In! 5200 EX

Delta Delta Harrow Harrow Cart Cart • 40-ft. aluminum • New brakes & tires • Roll tarp

Sale Price $12,500

• 4500-5500 bushel/hour • 7” hose • 7” cleanup • No dust in the grain bin • 10” auger • Improve your health today

Buy or Lease To Own

Bad Boy Mowers

16’ to 42’ Widths 16’ to 42’ Widths Hydraulic Fold Option Hydraulic Fold Option 7/16, 1/2, 9/16 Tyne Diameters 7/16, 1/2, 9/16 Tyne Diameters Powder Coated Cart Powder Coated Cart

$4456/yr - oac

New Authorized Dealer!

Works Great For Works Great For Seed Bed Preparation Seed Bed Preparation Incorporation Incorporation Pasture Renovation Pasture Renovation Residue Management Residue Management De-thatching De-thatching Call For Pricing!! Call For Pricing!!

• Outlaw Standup Series • 42” deck • Perfect for smaller yards

• Caterpillar diesel engine • 72” deck • The CAT Daddy of Bad Boy zero turn mowers

• Outlaw XP • Front and rear suspension • 852cc Kawasaki • 54” or 61” deck

Check us out on the web at www.frielingsonline.com 3400 Old Havre Highway – Great Falls, MT

1-888-453-2924

Danel Frieling

Keith Lippert, cell 799-1494

“Like” us on

Trader’s Dispatch, October 2012 — Page A26

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

VOLVO TRUCKS FOR SALE

2000 Volvo less than 100,000 miles on Series 60 Detroit, 10 speed, decent tires...................$19,000

1998 Volvo Detroit, 10 speed.......................$9000

~ ~ Will sell pair for $25,000 ~ ~ Phone 406-752-0960, Kalispell, Montana

Turn your used oil into FREE HEAT Tanks and transfer systems available

SHOP SPECIALTIES

•Ronan •Grass Range •Whitehall •Stevensville

1-888-676-5448 cleanburn@ronan.net

Partridge pea –Is it safe?

By Dr. Michelle Arnold, Dr. Cynthia Gaskill, Dr. Ray Smith, Dr. Garry Lacefield, Dr. Jeff Lehmkuhler, and Dr. Roy Burris, University of Kentucky Partridge pea is a warm-season legume commonly used in wildlife seed mixes. Conservation Reserve Program lands are often seeded with these wildlife mixes as they provide good nutrition and cover for birds and other wildlife. The current drought has resulted in the opening of many CRP lands for livestock foraging and many producers have questions about the safety of feeding partridge pea to livestock. The fruits and seeds of partridge pea contain anthraquinones that may cause irritation of the digestive tract if consumed in large quantities. When this occurs there may be diarrhea and some abdominal pain (colic). Treatment of the diarrhea is seldom required due to the short duration of symptoms and the fact that they usually stop eating when they feel sick. There have been no good dosing studies of partridge pea toxicity in cattle and no published reports on the maximum amount of partridge pea that can be safely fed to cattle. Some have reported that if the diet is < 25% partridge pea there should be no problems, but no documentation could be found to confirm this recommendation. However, it seems reasonable to suggest that if the partridge pea is diluted with other forages so that it comprises a low percentage of the diet, it should not cause a problem. Of greater concern is sicklepod (Senna obtusifolia) and coffee senna (Senna occidentalis) that look somewhat similar to partridge pea but are significantly more toxic. These may be found along roadsides, in waste areas and in old pastures. These species of Senna contain a series of anthraquinones, primarily found in the seeds, that exert toxic effects on many tissues, including those of the digestive tract and skeletal and cardiac muscle. Diarrhea and straining are usually the first signs observed followed by going off feed, lethargy, weakness, and trembling of the hind legs. As the muscle degeneration progresses, the urine becomes dark and coffee-colored and the animal goes down and is unable to rise. Death may occur within hours or the animal may survive several days after progressing to the stage of a downer cow. Treatment primarily involves treating the diarrhea and good nursing care. Animals removed from the plants at the earliest indications of problems may not develop the more serious muscular effects.

PERFORMANCE AG SERVICES Great Products - Great Prices

Get your winter wheat off to a good start with a quality seed treat.

We have the products you will need. Raxil, Charter, Stamina, Cruiser, Dividend

Do you have cheatgrass in your winter wheat? Call us to discuss options for control. Olympus, Prepare, Powerflex, Beyond Call Kevin now for your biggest discounts!

Great Products - Great Prices

Kevin Johnson, CCA PO Box 782 Conrad, MT 59425 cell- 406-781-4385 office- 406-271-2626 Aberdeen, SD office- 605-226-3161 Wishek, ND- 701-452-2004

Trader’s Dispatch, October 2012 — Page A27

Bush Fellowships available to elected officials

By NDSU Extension Service A Bush Fellowship is a four-year commitThe Bush Foundation, in conjunction with ment. Fellowship funds are paid out during the North Dakota State University (NDSU) the first two years of the grant. During the Extension Service, has begun making Bush Felremaining two years, Bush Fellows join with lowships available to elected and governmental the foundation in advancing its goal of buildofficials who want to enhance their leadership ing leadership capacity throughout Minnesota, skills and help overcome their communities’ North Dakota, South Dakota and the 23 sovtoughest problems. ereign nations. Through a partnership with GTS Educa“This program is a good example of the tional Events, elected officials and appointed NDSU Extension Service’s continuing partgovernmental officials at a policymaking level nership with the Bush Foundation,” Extension are eligible to apply to the new Bush Fellowcommunity economic development and leadership program. This opportunity is available to ship agent Jodi Bruns says. “This allows us to individuals in Minnesota, North Dakota, South make use of the many resources from the Bush Dakota and the 23 Native American nations that Foundation to enhance community projects.” share geography with those states. GTS will The deadline for the first round of these Bush oversee the selection process on behalf of the Fellowships is November 20. Bush Foundation. Visit http://www.BushFoundation.org/DeadThe grant funding ranges from $25,000 to lines for more information or an application. $75,000.

Industrial Services Co. Retirement

Thursday, November 1, 2012 – 11:00 AM MST – Missoula, MT Preview: Tuesday and Wednesday, October 30 and 31, 10:00 a.m. to 6:00 p.m. Auction Location: Industrial Services shop and yard at 6518 Highway 10 West, Missoula, MT 59808 Directions: Just 1.5 miles South of Interstate 90 and Highway 93 crossroads on Highway 10 West, left hand side. Watch for auction signs. Lunch will be available.

SHOP EQUIPMENT & TOOLS

CRANES AND TRUCKS

2005 Peterbilt 330 with National 81000, 23-ton crane up to 100-ft. main boom with up to 44-ft. jib. P&H 650-TC 50-ton crane, up to 150-ft. boom, good working condition. 1995 truck F250XL, 3/4-ton, 4x4, manual transmission, 460, extended cab, 84,000 miles (welder not included).

TRUCKS

Truck flatbed, 9-ft. x 8-ft., black. Truck flatbed, 9-ft. x 8-ft., red.

GENERATORS, COMPRESSORS, TUGGERS & JACK HAMMERS

Air compressor, Ingersoll Rand 375, 4 cylinder, Jimmy diesel & tandem axle trailer. Air compressor, Quincy 175 CFM, White 4 cylinder gas, spare tire. Air tugger, Ingersoll Rand, pneumatic (one large, 2 smaller ones) Air hoses. Generator, diesel 5500. Jack hammers (5). Jack hammers, pneumatic (5).

CONCRETE EQUIPMENT & TOOLS

Concrete bucket, regular. Concrete bucket, side delivery. Concrete core drills and bits. Concrete finishing tools. Concrete floats. Concrete forming brackets. Concrete mixer, electric (220). Concrete power screed. Concrete saw, clipper walk behind, Wisconsin 4 cyliner, air cooled. Concrete troweling machine, 80 hp. Honda. Concrete vibrator, Electric STOW (110). Concrete or rivet busters, CP11X (2). Brackets for concrete forms. Square column forms. Demo saws.

SPECIALITY ITEMS

Boiler tube rolling tubes, complete set, 3 power heads, 1” drive, digital torque controls. Boiler tubes, 750LF, 21/2” pipe. Man basket. Plate burner, 4 torch, 3 tables, Heath Engineering, Model LCD1210, Serial #1347 (stored inside). Soda blaster, Armex Acustrip System, 12 gallon vessel. Transit, David White Model 8300. Cylinder rack. Electric panels for Jobsite (5).

WELDERS AND WELDING EQUIPMENT

Welder, arc - Miller, (4), 300 amp, 3 phase. Welder, generator, portable, Miller Big 20. Welder, Lincoln SA800. Welder, Miller Big 40 (1). Welder, Miller Big 20 (1). Welding leads, grounds, stingers. Welding power source, Miller CP750E (1). Welding rod heaters. Welding rods on rolling rack. Welding rods, stainless, 1 pallets. Welder, inverter 4 gang Miller CST 250, 3 phase. Welders, inverter 4 gang Miller XMT304, 3 phase. Torch carts (7). Torch sets.

TOOLS & POWER EQUIPMENT

Angle grinders, 4”, at least a dozen. Angle grinders, 9”, at least a dozen. Chop saws. Demo saws - Homelie XL 982, Wacker. Hilti hammer drills and bits. Impact wrenches (2). Percussion gun (1) MX75 and (1) DX451. Pneumatic hammer. Pneumatic jack hammer to go on backhoe (Set up for John Deere 510 or 310). Pneumatic pile driver. Pneumatic tampers (2). Sawzall. Screw guns - at least a dozen. Railroad jacks (2).

Acetylene sets and extra hoses, gauges and torch heads. Banding unit. Beam trolleys, assorted sizes. Blocks & block tackle sets, assorted sizes. Bolt calibrator, Skidmore Wilhelm. Cable/wire rope, partial spools, 5/8”, 3/4”, 1 /2”. Chain fall sets, various, approximately 18. Chain falls, 1-ton to 12-ton. Chain pullers (18) from 1-ton to 3-ton. Chipping hammers (5). Copus blowers (6). Crane pads. Cut off wheels for Demo saws. Drive sockets, 1”. Electric chain hoist, Harrington, 1/2-ton (2). Electric chain hoist, Jet, 1-ton (1). Fire brick - pallet. Flange & beam punch, Fabriline with hydraulic unit, Model #FH-12EEP, Ser. #FH2690. Forks, 1 set. Gas trash pumps (2). Ground fault plug-ins. Guy wire/cable, 2 partial spools, 7/16”. Hobart handler (1) (110). Hose reel, double, ReelCraft, pneumatic. Hose reel, OMECO. Hot air blower Leister. Impact sockets, 1”. John A clips, 5 barrels. John A form brackets, 10 barrels with approximately 300 brackets/barrel. Jumping Jack compactor. Jumping Jack Wacker. Light strings, dozens. Picking beams. Pipe bender, Greenlee #880, 1/2-2”. Plate clamps. Pneumatic chain hoist, Ingersoll Rand, 2-ton (1). Porta Powers with accessories. Posts for brackets. Power drills, 1” and 1/2”. Power sprayer, Hudson (1). Pump, Cornell, 71/2, 3 phase. Rebar spalers and caps - boxes. Rigging blocks, 5 part, (3). Rigging racks and cables. Rigging shackles and clevises. Roofing insulation, Perlite 24” x 48” x 1”, 4 pallets, 800 sq. ft./pallet.

Scaffold brackets. Scaffolding and braces. Scaffolding planks (OSHA Safway planks), from 8-ft. to 14-ft. Scissor hoist. Shop heater, Dayton, gas. Shoring jacks (2 dozen). Slugging wrenches - various sizes. Snap ties. Socket set (1) 1”. Socket sets (2) 3/4”. Spreader bars (7). Staging lifts, Spider, pneumatic (2). Telescopic beam (1). Thermal Arcs 130 (4) (110). Trash pump. Tripods. Turn buckles. Vibor Strike, 12-ft., Honda motor. Wire feeder, LN25, Lincoln. Wire feeders (2), Hobart Hefty CC/CV. Wire rope slings, assorted sizes & lengths.

MISCELLANEOUS ITEMS

40-ft. metal shipping container. Bits and chisels. Blades, Diamond, for concrete saws. Bridge girder clamps (2). Buckets and bins of bolts. C clamps. Chairs. Clevises and cable clamps. Construction signs, various. Door, steel (1). Extension cords - various sizes. Extension cords - 3 phase and Y’s. Extension ladders. Hand tools (shovels, picks, sledge hammers, etc.). Levels. Nylon slings, at least a dozen. Radios & chargers (5), Motorola Radius P100. Safety fence - 1 pallet. Safety harnesses - numerous. Screws, various, several buckets. Steel boxes (10). Tie offs Water coolers - numerous. Wheelbarrows (6). Work lights, dozens. Job/Gang boxes, at least a dozen, various sizes. Truck flatbed, steel, 9-ft. x 8-ft. black. Truck flatbed, steel, 9-ft. x 8-ft. red.

Auctioneer’s Note: Pat Haffner has decided to retire and close down business for Industrial Services Co. The company will be liquidating a large inventory of industrial contracting equipment including welders, power equipment, tools, cranes, rigging and vehicles. There will be a few guest consignors with large items as well.

LUMBER, FENCING, PLANKS AND SCAFFOLDING

Dunnage - various lengths. Laminated beams, various sizes. Lumber, treated, 2 bundles, 4x6 T&G. Planks, aluminum, various sizes. Scaffolding planks (OSHA Safway Planks), from 8-ft. to 14-ft. Steel fence posts. Wood fence posts. Credit cards and terms: Unless noted otherwise all items are reported to be in good working order at the time of the sale. However, all sales are “as is” “where is” with no guarantees by Rivers West Auction, LLC. Announcements the day of auction supersede any previous ads. Driver’s license or government issued ID required to register as a bidder. Our normal terms and conditions are as follows: These major credit cards are accepted, Master Card, Visa, American Express, Discover and debit cards. We accept bankable checks with a Montana driver’s license if you are known to the auction company. If you are unknown to the auction company, finances will need to be declared at registration. If you are purchasing a titled item or piece of heavy equipment (car, truck, boat, forklift etc.), a bank letter of credit is recommended if you are unknown to the auction company. If using a credit card, you will be charged a 4% convenience fee. There will be certain auctions where these terms may change. When there is a change it will be noted in the Auction Calendar and explained prior to the auction. Announcements made sale day take precedence over previous advertising and statements.

TO MANY ITEMS TO LIST AND MORE ITEMS COMING IN

Phone bids will be accepted. Online bidding available for larger items, powered by BidCaller. For photos, more info & upcoming sales, visit: www.riverswestauction.com

Jason Clinkenbeard 406-239-3529 jason@riverswestauction.com

Trader’s Dispatch, October 2012 — Page A28

SEAMLESS POLY LINER • 1/3 Weight of Aluminum • UV Inhibitor & Food Grade • Chemical Resistant • 1/8”, 3/16”, 1/4”, 3/8”, & 1/2” thick • 8-ft. or 10-ft. wide x Any length

Sorghum eyed as a southern bioenergy crop

By Jan Suszkiw, Agricultural Research Service juice extraction process also can be burned Sweet sorghum is primarily grown in 8-ft, 10-ft, 12-ft. to generate electricity. the United States as a source of sugar for Widths Sattler and Pedersen’s studies of sorghum syrup and molasses. But the sturdy grass has are part of a larger effort by ARS-USDA’s other attributes that could make it uniquely • Dump trucks & belly dumps principal intramural scientific research suited to production as a bioenergy crop, • Wood floor trailers agency-to answer a government mandate U.S. Department of Agriculture (USDA) • Manure spreaders • Fertilizer hoppers calling for the production of up to 36 billion studies suggest. • Chutes gallons of biofuel by 2022. Approximately Sorghum is an ideal candidate because of 15 billion gallons of that total will come its drought tolerance, adaptability to diverse • QuickSilver Liners Haul dirt, landscaping materials, from grain ethanol, with the remaining 21 growing conditions, low nitrogen fertilclay, sand, manure, rock, grain, etc. • Durapro Liners billion gallons to come from other sources, izer requirements, and high biomass (plant ALSO Hot Asphalt Liners Available or “feedstocks,” including sorghum, sugmaterial) content, according to molecular • HMW Liners arcane, other grasses like switchgrass, and biologist Scott Sattler and collaborator oilseed crops like rapeseed and soybean. Jeff Pedersen with USDA’s Agricultural Sorghum and sugarcane are top candiResearch Service (ARS). It also produces dates for production in the southeastern soluble sugar that can be converted to 1-406-293-3097 TOLL FREE 1-877-368-3097 United States because they are complemenbiofuel. Residual fibers left over from the tary crops that can extend the biofuel production season and utilize the same equipment, note Sattler and Pedersen, who work at the ARS Grain, Forage and Bioenergy Research Unit in Lincoln, Nebraska. However, they are The latest advancements not the only team examinin Forage Seeds: ing sweet sorghum’s energy potential. Willow Creek At the ARS Crop Genetics and Breeding Research Unit Forage in Tifton, Georgia, geneticist William Anderson and his Winter Wheat colleagues are working to Producers have reported identify desirable sweet sorghum genes and their func31/2 ton dry forage yield tions so improved varieties on 2011 production can be developed. In studies, on dryland crop rotation. they selected 117 genotypes from the ARS sorghum germplasm collection at Griffin, You have read about it and now it is available at: Georgia, and evaluated them for their ability to mature Inc. quickly and resist fall armyPhone: 406-434-5011 FAX: 406-434-5014 worms and the fungal disease Box 852, Shelby, MT 59474 e-mail: bigskyseeds@3rivers.net anthracnose. ➔

➔

Tired of Shoveling?

NORTHWEST PLASTICS

NEW SEEDS Now Commercially Available

Big Sky Wholesale Seeds,

FRONTLINE AG

Conrad 1-877-278-5531 or 406-278-5531 Choteau 1-866-466-5741 or 406-466-5741 – Cut Bank 1-800-273-5530 or 406-873-5505

Trader’s Dispatch, October 2012 — Page A29

NEW Case CT270

IN STOCK

USED SEEDING & TILLAGE

Concord 4710 47-ft. air drill with 10” spacing, Stealth openers and 3000 tow behind cart............................$30,000 Brillion 24-ft. mulcher............................................$13,000 H&S 12 row, 24” cultivator, guide cones, tunnel shields, flip up discs................................................................$4995 Alloway 12 row 24” cultivator with flip up discs, tunnel shields..................................................................$3995 John Deere 2700 7 shank disc ripper....................$22,000

MISCELLANEOUS

track machine IN STOCK Various attachments available

NEW Case IH Precision Spray 100 sprayer with 90-ft. booms & 1000 gallon tank

NEW

IN STOCK

Case IH Magnum 210 CVT

IN STOCK

2005 Brandt 90-ft. suspended boom sprayer..................... . ............................................................ JUST TRADED 2008 Farm King 10x70 auger, swing away hopper. Very good condition......................................................$8900 Case 445 skid steer, cab, bucket and 1246 hours.$32,000 Bobcat 642B skid steer, gas engine, 680 hours, very nice condition...............................................................$6900 2005 Frontier 18 wheel high-capacity rake. Very good condition............................................................$16,000 Fox corn chopper......................................................$4995

USED TRACTORS

Case IH MX240 with MFD and 3-point............ COMING IN John Deere 4840 2WD, powershift, 3-pt., 20.8x38 tires..... . .........................................................................$22,500

John Deere 4440 with 3-point, dual PTO, good paint and recent engine work............................................$25,000

NEW

Case IH Magnum 290

IN STOCK

NEW CASE IH Maxxum 140 140 hp

LOADER AVAILABL E John Deere 4230 2WD with 3-point, dual PTO and 8800 hours..................................................................$14,500

USED combines & HEADERS

2005 Case IH 2388 combine..................... JUST TRADED 2005 MacDon 963 35-ft. draper head with batt reel and gauge wheels. No transport...............................$31,000

USED WINDROWERS

NEW CASE IH Farmall 95

NEW CASE IH Farmall 75A

MFD, 3-point, PTO

IN STOCK

75 hp engine, MFD, loader, 3-point and PTO.

Case IH WDX901 self-propelled windrower with 18-ft. auger header...............................................................$49,000 2003 Case IH WDX901 with 2010 CIH HDX162 16-ft. auger header, 1650 hours............................................$49,000 2001 John Deere 4890 with 18-ft. auger header...$39,000 2000 Case IH SC416 16-ft. pulltype with 1000 PTO drive.. . ............................................................................$9500

USED BALERS

2008 Case IH RB564 round baler, mesh wrap, wide pickup, endless belts, hydraulic pickup, central lube, 8700 bales..................................................................$29,900 2006 Case IH RBX563 round baler with wide pickup, mesh wrap, endless belts. Good condition, 8000 bales.$26,000 1999 Case IH RS561 round baler..........................$12,500 1995 Case IH 8465...................................................$8995 1994 Case IH 8480 soft core....................................$6995 1991 Hesston 560 round baler.................................$7500 John Deere 530 round baler, good condition...........$5500

TRI-COUNTY IMPLEMENT Sidney, MT • 2429 W Holly Street 406-488-4400 • 1-800-624-6540 • Visit our website at tri-cnty.com www.casecorp.com

Trader’s Dispatch, October 2012 — Page A30

Leroi HDR-12EW crawler rock drill, runs well. Have a mostly complete parts machine, lots of drifter parts, and manual & parts book............... $6000 obo Ingersoll-Rand 185 CFM air compressor.......$6000 OR $10,000 FOR THE PAIR Phone (208) 926-7127, Kooskia Idaho

FOR SALE

Direct marketing meat workshops offered By WSU Extension

The direct marketing of meat by livestock producers will be the topic of a series of workshops offered this fall and winter by Washington State University (WSU) Extension. Workshop series organizer Tom Platt, a WSU Extension educator based in Davenport, said the series will help livestock producers identify and manage the risks they take on when they begin direct marketing meat. “With demand growing for locally grown food, livestock producers are working hard to develop the infrastructure to meet this demand,” Platt said. “In eastern Washington, producers are excited about a new, federally inspected livestock slaughter plant being developed in Odessa, Washington. This plant will help provide locally raised meat to Washington consumers.” The four-part workshop series will be

offered in various eastern Washington locations. Held monthly, the series begins in November and completes in February 2013. Platt said that although some of the risks livestock producers face in direct marketing are similar to those they encounter in producing feeder and finished livestock, many are new and unfamiliar. The series will address risks related to starting a business, including financing, marketing and product supply management; public relations; product quality and consumer perceptions of healthfulness; animal welfare; environmental stewardship; food safety; liability; and business, sanitary and environmental regulations. During the series, participants will be guided through a process of identifying risks they deem important enough to manage, and then developing strategies to manage those risks. The first workshop is scheduled for Thursday, November 1, in Grand Coulee. Topics include business planning, marketing, and dealing with things when they go haywire. The second workshop on Thursday, December 13, in Soap Lake deals with risks related to livestock finishing, meat quality, and many other factors identified and discussed by a panel of people in the direct market meat business. The third workshop is scheduled for January 10 in Ritzville. It will focus on business licensing and regulations, including health, sanitary and environmental regulations, as well as animal care guidelines. The fourth workshop is scheduled for February 5 in Spokane and will emphasize managing food safety risk and liability. At this workshop participants also will be asked to complete a list of strategies for managing risks they deem important based on their direct-market meat-businesses experience and information they discuss during the workshop series. All workshops run 10 a.m.3:30 p.m. Registration for the four-part workshop series is $85 per person by October 12, and $110 per person by October 29. The registration fee covers lunches and refreshments. A brochure describing the workshops in more detail and containing a registration form may be downloaded from http://bit.ly/meatmarketing. The brochure may also be requested by calling WSU Extension in Davenport at 509-725-4171. For accommodation of special need, or for more information, contact Tom Platt, 509-725-4171. Additional funding for this series was provided by Washington State University Western Center for Risk Management Education and USDA National Institute of Food and Agriculture under award number 2010-4920006203.

Trader’s Dispatch, October 2012 — Page A31

WE BUY COPPER • BRASS • ALUMINUM • IRON

RAILROAD FLAT CARS

NEW STEEL, NEW SALVAGE, AND RECYCLING ALL IN ONE LOCATION

For Non Potable Water Storage

TRADE SCRAP FOR CASH OR NEW MATERIAL

For Bridges

TANK CARS

GREAT FALLS

1408 52nd Street North • Great Falls, MT 59405 (406) 761-4848

Overseas Containers For Sale 40-ft. & 20-ft.

1-800-334-5964

✗✗✗ Fencing Supplies ✗✗✗ Used Guard Rail Posts

5-ft. long - $4.00 ea.

Round steel post caps 31/2” & 27/8”, round steel post clips

Overseas Flats - 8’x40’ Great for bridges

Chicago Heights Steel Fence Posts with heavy spade plate

16.5 CAL tie wire $4.95/Roll New Red Brand Class I Barb Wire

New 12” - 48” Steel Culvert

51/2’ & 6’ T1.33#

Used Round Tubing

Great for corrals 11/4” O.D. 11/2” O.D. 13/4” O.D. 2” O.D. All approximately 20-ft. & 24-ft. lengths

New 12” - 30” Poly Culvert

Used 55 Gallon Plastic Barrels – $10.00 ea.

30” & 36” Culvert Grade Pipe $25.00/ft.

1 1/2” x 100-ft. Fire Hose $21.50 ea.

3/8” Polypropolene Coated Cable 12,500# break strength

HOPPER BOTTOM CARS Great for grain storage

New Surplus

Non galvanized Guard rails

2 rail - 12” x 13’6” and

CATTLE GUARDS

Great For Horse Fence Sold by the reel only, 2345-ft./reel

BLACK PIPE

Various sizes available – CALL

.16¢/ft.

NEW STEEL plate & beams IN STOCK

5” channel construction on bottom with 3” channel on top 10-, 12-, 14- & 16-ft. available

Now Carrying Abrasives (Sand & Slag)

Call Fred, Dick, or Randy

CLOSEOUT!!!

#2 Railroad ties - $800 each

4” – $20.00

New Selection of Tools!

#1 Railroad ties - $1550 each

Bench Vises

New Surplus Square Tube •Sizes vary• • Stainless Steel Sheets • Flat Bar • Pipe, Fittings

IN STOCK

Wood Blocks 7”x7”x14” $1.50 each NEW Rebar

3/8” & 1/2” - 20-ft. lengths

We Buy

and Combines

FOR SCRAP

Old Farm Tractors

Now Buying

Automotive & Heavy Industrial Batteries

42” Diameter Land Roller Pipe USED 2 7/8” drill pipe

LAND ROLLER PIPE

5-ton gear puller................... $58.87 Oil pistol can, 6 oz...... ........................ $3.55 1-ton chain hoist.................. $89.90

Used Electric Motors & Boxes

USED SUCKER ROD: 3/4”, 7/8” & 1”- 25-ft. lengths

WE SELL NEW & USED Tubing • Pipe • Angle Iron • Plate

24” - 42”

Domestic A500 Grade B 6”x.250 well casing, 20-ft. lengths.... Call for pricing

Call Jim Filipowicz @ 800-334-5964 (406) 761-4848

After Hours (406) 791-6712

Fax (406) 791-6708

Steel Department & Salvage Yard Monday-Friday 8:00 a.m. to 5:00 p.m. Salvage Yard – 8:00 a.m. to 12:00 p.m. Saturday

USEABLE SALVAGE DIVISION • Limited Quantities

Useable Salvage At Great Falls Location

Trader’s Dispatch, October 2012 — Page A32

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT THEM IS NOVEMBER 2.

Your Only FULL SERVICE Spring Shop.........Since 1912 Great Falls, MT 3257 Vaughn Road

(406) 452-1246 — 1-800-378-1246 3257 Vaughn Road – Great Falls, MT

✓ AUTO ✓ TRUCKS ✓ MOTOR HOMES ✓ 4x4’s ✓ FARM EQUIPMENT ✓ ANTIQUE & CLASSIC CARS ✓ Leaf Springs - Custom Made & Repaired ✓ U-Bolts - Made to Order ✓ Axle straightening

Remember....We handle Black Rat Recovery winch and ExtremeAire compressor

See us on the web - www.swainsspring.com

Where do you take your hydraulic problems?

BIG SKY HYDRAULICS

4 General machinery and spray welding

• Gauges

• Filter products

4 We install wet kits

• Tube fittings and adapters 4 PTO’s installed

See us for all our hydraulic pumps, motor & valves • Hydraulic hose and fittings on hand • Hydraulic quick disconnect • Hydraulic pumps, motors and valves

* Balebed and snowplow maintanence available * Big Sky Hydraulics & Machining Inc. Hours: Monday-Friday 8:00 AM to 5:00 PM

406-727-5623

2315 10th St. NE #B Great Falls, MT 59404 After hours emergency service available 406-736-5462 or 406-454-1692

Locally owned by Mike Yuhas & Mark Allen

MT Certified Seed Plant (406) 566-2282 - Stanford, MT

Custom Cleaning & Treating Fall 2012 winter wheat SEED ✯ Common Neeley ✯ Common Rampart ✯ Certified Genou* ✯ Certified Yellowstone* ✯ Certified Decade*

* denotes PVP Title 5

Fall 2012 winter pea SEED ✯ Certified Granger Austrian ✯ Certified Windham Yellow Field

Water Softener & Stock Salt • Feed Corn • Wood Pellets

FULL LINE OF FARM CHEMICALS Nutrena Feeds by Cargill

Test for high nitrates in forage due to drought

By University of Wyoming Extension Persistent drought conditions in Wyoming have increased the likelihood farm and ranch livestock could be affected by eating forages that accumulate nitrates during prolonged hot, dry periods. Steve Paisley, beef extension specialist at the University of Wyoming (UW), suggests livestock producers should sample and test forages for nitrates during prolonged droughts. “To properly sample forages, producers will need a hay probe to not only test the outside of the bales or stacks, but the inside as well,” he said. Hay probes are hollow cylinders with a sharp end, and, depending on the type of forage probe, the cylinder is pushed into the bale either by force or with a cordless drill. The probe then takes a core sample of the bale. “A minimum of 10 bales from a susceptible field needs to be sampled to get an accurate test,” said Paisley. “Nearly every county extension office, local co-op or feed store should have a forage probe available for ranchers. The samples can be placed in a sealable bag and sent to commercial feed testing labs such as Ward Laboratories or SDK Laboratories.” Information about both is available online. Paisley said samples can also be sent to the Wyoming Department of Agriculture’s Analytical Services Lab at 1174 Snowy Range Road in Laramie; to contact the lab, call 307742-2984. Some plants are more likely to accumulate nitrate than others, according to Paisley. Crops capable of high levels of nitrate accumulation under adverse conditions include corn, small grains, Sudan grass and sorghum. Weeds capable of nitrate accumulation include pigweed, lambsquarter, sunflower and bindweed. “Nitrate levels less than 3,000 parts per million (ppm) are considered safe, but forages with levels between 3,000 ppm and 6,000 ppm require special feeding considerations to improve feeding safety,” said Paisley. “Nitrate levels more than 9,000 ppm are considered potentially toxic and should not be fed as the only source of feed.” The UW Extension publication Water Quality for Wyoming Livestock and Wildlife has more information concerning acceptable and non-acceptable levels of nitrates in forages; go to www.uwyo.edu/ces and lick on Publications on the left-hand side of the page. Click search bulletins and enter B-1183 in the Publication Number field. Once opened, scroll down to page 25, Chapter 6, Nitrate and Nitrite. “Be aware of what plants are potential nitrate accumulators,” said Paisley. “It is important to sample and test these feeds prior to use to determine potential feeding concerns. There are ways to mitigate the hazards of high nitrate feeds, such as blending with other feeds, feeding additional grain and by slowly adapting or adjusting the cattle to higher nitrate feeds.” Nitrates in forages do not in themselves cause poisoning, according to Paisley. Instead, they are converted to toxic nitrites within an animal’s digestive tract. “In cows and sheep, this conversion takes place by the bacteria in the rumen,” said Paisley. “In horses, it is converted by the bacterial populations in the large intestine. The nitrites get into the blood stream and cause a change in hemoglobin, converting it to methemoglobin.” Paisley said the conversion to methemoglobin reduces the oxygen-carrying capacity of the blood. When a critical mass of hemoglobin has been converted, the blood can no longer supply tissues with oxygen, and the animals can suffer from a type of asphyxiation. Plants accumulate more nitrates during drought years because proper plant growth is dependent upon adequate water, energy from sunlight and normal temperature ranges conducive for growth, according to Paisley. Plant roots absorb nitrates from the soil, and the nitrates are converted to amino acids and protein as the plant grows and develops. “During drought years,” he said, “the root system continues to absorb nutrients from the soil, but, because of the lack of moisture as well as abnormally high temperatures, plant growth is restricted, and the nitrates are not converted to protein and continue building up in the roots and the lower portion of the stalk.” ##### In the Satere-Mawe tribe in South America, a boy being initiated into manhood is forced to wear gloves woven with hundreds of bullet ants, whose sting is considered to be the most painful of any insect. The ants sting the boy until he passes out from pain; if he can be revived, he is considered a true man.

Fall is time to plant hardy springflowering bulbs

By NDSU Extension Service Fall is the time to plant daffodils and other narcissus bulbs, according to Ron Smith, North Dakota State University (NDSU) Extension Service horticulturist. “For gardeners, the joy starts early by selecting what to buy and plant,” Smith says. “Choose different types for a variety of looks and to create a staggered spring-season bloom schedule. When picking out daffodils, the classic trumpet types are a good place to start. They’re the must- haves for that archetypal ‘big yellow’ appeal. Trumpet daffodils come in crisp solids or mixed colors, including yellows, whites, oranges, reds and even peachypinks and greens.” How to choose from so many choices? First, fall in love with the look and then organize your favorites by their specific bloom times for early, mid or late spring. Daffodils (narcissi) are perennials that will naturalize when planted in full sun and soil that drains well. This makes narcissi a sound investment because they’ll come back to bloom year after year and even multiply through time. This kind of staying power is a major bonus for gardeners. Also, narcissus bulbs and plants are pest-resistant. Deer, squirrels, voles, groundhogs and other foraging animals don’t eat them. This is an important factor in selecting bulbs for spring blooming. Tulips, as much as they are loved by gardeners, are among the favorites of nature’s early spring nibblers such as voles, rabbits and deer. “Once the temperatures drop in the fall and sweater wearing becomes a regular wardrobe selection, it’s time to plant daffodils and other spring-blooming flower bulbs,” Smith says. “This fall, if our local conditions are unusually hot and dry, which they have been for most of our region, one can plant a bit later than usual to give the soil sufficient time to cool off. However, to get a good selection at local retail garden centers, make your selections early to get top quality.” ##### A goldfish has a memory span of three seconds.

Trader’s Dispatch, October 2012 — Page A33

Dave Gill Ranch Equipment & Fall Open Consignment

Saturday, October 27th, 2012

10 A.M.

Location: Fairgrounds, Lewistown, MT Owner: Dave Gill, Harlowton, MT and guest consignors

TRUCKS

1992 Ford F700 tandem truck, 6 speed, 429 gas engine, fuel injector, 20-ft. Scott grain box, twin cylinder, removable sides, wood floor, roll tarp, 3-pc. rear door w/ grain gate, 73,497 miles. A good runner that will start in any kind of weather. The sides come off to convert this into a hay hauler. 1972 Ford 600 lumber truck, 182 hp gas engine, 5/2 speed, 20k GVW, steel frame oak deck, roller on tail, 3 tie down winches, no hoist. This was used as a lumber delivery truck; low mileage!

ATV & ACCESSORIES

1992 Honda 4-Trax, 4x4, 300cc, manual transmission, good condition! Scorpion ATV sprayer, 25 gallon, 10-ft. boom

TRAILERS

1996 Wilson semi grain trailer, 50-ft., hopper bottom, 3 axles, 130” spread, aluminum sides, new brake shoes, new shaft bearing, rear pintle hitch, 40% 11x24.5 rubber 1980 Hale stock trailer, 14-ft., bumper pull, good floor 1980 WW 4-horse trailer, bumper pull, front divider bar, new floor, new lights and wiring, mats, good rubber 1996 Donahue goose neck, 7-ft. x 16-ft. stock trailer, good floor, mats 1977 Terry camper trailer, 12-ft., bumper pull, clean interior 1991 Shop-built flatbed trailer, 16-ft., goose neck, hydraulic jack, tandem, 16” wheels 2011 Newman’s snowmobile trailer, 2-place, 12-ft., ramp, used once, like new!

HAYING EQUIPMENT

John Deere 1600 hydra-swing swather, 16-ft. John Deere 530 round baler, SN#718467. Makes a good bale.

TRACTORS

1998 John Deere 5410 tractor, diesel, 70 hp, MFWD, ROPS w/ canopy, 540 PTO, dual rear hydraulics, 3 point, CollarShift trans. (9 fwd., 3 rev.), w/ JD 540 loader, 6-ft. bucket, 1152 actual hours. This tractor has been well maintained and stored inside when not in use. It’s a dandy, and with only 1150 hours, it has lots of life left! Ford 5000 tractor, 2WD, diesel, w/ Ford 777D quick attach loader, 6-ft. bucket, 540 PTO, 3 point, dual hydraulics, fair rubber, runs well, SN#0290434 (1970) Farmall M tractor, converted to 12V, rear PTO, fair rubber, runs good! Ford 631 tractor, power steering, 3 point, PTO, rubber 70%, 3200 hrs. DuAl loader, w/ mounts for Ford 600 or 800

HORSE DRAW EQUIPMENT AND ACCESSORIES

3 POINT EQUIPMENT

John Deere 513 rotary mower, 60”, PTO Wallenstein WX310 hydraulic log splitter Work Saver, hydraulic bale unroller, 50’’ arms, 63’’ wide King Kutter disc, 6-ft., excellent Ford scraper blade, 6-ft., 1-way pin adj. Massey-Ferguson blade, 6-ft., 2-way crank adjustment. John Deere 65 8-ft. Vicon fertilizer spreader Danuser post auger, 10” bit

Single-horse driving cart, good upholstery, rubber wheels, overall great condition. Horse drawn wagon, two seater with flatbed, set up for hydraulic brakes. 3-Sets of 2-up harnesses Set of 4-up harness

OTHER EQUIPMENT

LIVESTOCK EQUIPMENT

Powder Mountain 60-ft. round pen, 15 panels, 1 bow gate, excellent condition! Powder River calf table Johnson calf table Tarter round bale feeder, 8-ft., like new! CountryLine auto head catch, like new! Ideal ratcheting calf puller, used once Rohrer air post pounder, excellent! 2-Gallagher PowerPlus B100 solar fence chargers, like new! 100 +/- metal step-in electric fence posts 50-steel T-posts Cattle guard, new, 12-ft.x8’’, steel 10-ft. stock gate, HW brand 4-12-ft. panels, HW brand 10-ft. panels, square tubing 2-8-ft. steel gates, HW brand Cattle oil rub All steel loading chute, adjustable height, 21”-51” Wire hog & cattle panels Roping chute, steer size 13 ½-ft. pipe gate Woven wire, assorted new rolls Sheep shearing motor,

WESTERN GEAR, TACK & COLLECTIBLES

John Deere 12-ft. tool bar, w/ Noble mounted harrows, hydraulic lift MY-D Han-D grain auger, 16-ft. x 4’’, Dayton ¾ hp electric motor Arnegie tool bar, 8-ft., hydraulic Round bale rack, 16-ft. Drag harrows Steel tubing, 2”x3”, 2-20-ft. sections 350 gallon poly water tank, no lid 165 gallon poly water tank 2- 50 gallon barrel gas pumps, Super Gas Boy Jet & KP Manufacturing

Roping saddle, 16”, assoc. tree Promaster 16” pro series, southern riding saddle SHOP TOOLS & EQUIPMENT 16” stock saddle, double M-Glow portable air compressor, 4 hp, 50’-ft. rigged, padded seat hose U.S. Cavalry bit; U.S. Hobart Handler 120 wire-feed welder & CV WWI Bayonet power source, 90 amp, 120V U.S. horsehair cavalry cinch, mint Central Hydraulics engine hoist Cowboy cuffs, tooled, mint Chicago 12-speed heavy duty drill press, Studded cowboy cuffs bench model. Silver mounted bits & headstalls Cummins 5-speed drill press, bench model Roy Rogers gun belt with double holsters B&S dual-tank portable air compressor, 5 hp Rawhide braided riata, old & nice B&S portable pressure washer, 2000 psi Montana State Penitentiary tooled ladies Hilti air stapler purse, 1950’s Diamond plate pickup tool box Youth batwing chaps; Braided leather Many hand tools, etc. quirt C.M. Russell, Trails Plowed Under, w/ dust jacket C.M. Russell, Good Medicine, w/ dust jacket Tray of 14 arrowheads JAYSON & KYLE SHOBE, AUCTIONEERS & REALTORS from central MonOffice: 406-538-5125 • Kyle: 406-366-0472 • Jayson: 406-366-5125 tana 408 W. Main, Lewistown, MT 59457 Leonard Lopp original e-mail: jayson@shobeauction.com website: ShobeAuction.com oil painting

Trader’s Dispatch, October 2012 — Page A34

On the Way

’s 2013 Order me to DER i T s ’ R It LY O EAR GRAM PRO

(3) 1220, (2) 1020, (1) 720

Don’t miss out on the best prices of the year on these economical sprayers

Big Sky Equipment Toll-free 1-800-332-7541 or Conrad local 278-3277 r orde y l r Ea ram Prog

In Stock

(2)-M105 windrowers (2) D60 35-ft. draper headers (1) A40 16-ft. hay head

IN STOCK

1-Farmall 45A MFD with loader, 45 hp 0% Financing on all

NEW McCormick & Case IH tractors (under 100 hp • financing oac)

Big Sky Equipment

Toll-free 1-800-332-7541 or Conrad local 278-3277

All makes parts & supplies & AI We have parts for your Jet Stream Computer Sprayer

1-800-332-7541 or 406-278-3277 Conrad, Montana www.4caseih.com

POST SEASON CLOSEOUT SPECIAL

Agricultural & Industrial

Products

BIG SKY EQUIPMENT

• Case IH plow and air drill sweeps • Atom Jet openers • Gen regular and carbide openers • Flexi-Coil Stealth openers • Flexi-Coil air drill parts

Big Sky EquiPMENT Toll-free 1-800-332-7541 or Conrad local 278-3277

New Morris 900 Hay Hiker, 8 bale New Vermeer R2300 hydraulic rake SOLD New MacDon M105 swather, 16-ft. hay head

Call for Details

Big Sky Equipment Toll-free 1-800-332-7541 or Conrad local 278-3277

Trader’s Dispatch, October 2012 — Page A35

USED HAYING EQUIPMENT

JUST IN

2011 Case IH 6088 combine, rock trap,yield/moisture monitor. Very low hours........... Just Traded

Hesston 8100 swather, 25-ft. draper header............ ...................................................................Just In Hesston 6450 swather, 14-ft. hay header, 21-ft. draper header.............................................Just In John Deere 580 pull-type windrower, 25-ft. draper.. .................................................................... $4995

Let’s Deal

USED TRACTORS

Case IH 9380 tractor, synchro shift transmission, 30.5x32 tires, Cummins N14 engine, low hours.... ...................................................................Just In 1994 Case IH 1688 combine. Reconditioned......... ....................................................... Just Traded 1987 Case IH 1680 combine, International engine, rock trap, 1010 30-ft. header, batt reel............... ....................................................... Just Traded

Case IH RB564 round baler, net/twine, wide pickup. Extremely low bale count, like new.......... $38,250

Make Offer

1993 Case IH 8820 windrower, 21-ft. shiftable draper header, 1126 hours............. Just Traded Flexi-Coil System 67XL suspended boom sprayer, 1600 gallon water tank, 90-ft. booms, Auto-Rate, foam marker, rinse tank.................. Just Traded

John Deere 8650 4WD tractor, 4 remotes.....Just In

USED SPRAYERS

WE’RE DEALIN’ Bring us your offer

Case IH RBX563 round baler, net/twine, wide pickup, large tires................................................. $22,900

Case IH SRX160 suspended boom 132-ft. sprayer, Raven Auto Rate, 1600 gallon tank, 4 ball valves, induction cone................................... Just Traded Flexi-Coil System 67XL wheel boom sprayer with 110-ft. booms, 1000 gallon tank, Flexi-Control, excellent....................................................... $23,500

Massey Ferguson 165 2WD, 3-pt., 540 PTO, loader, bucket.......................................................... $6995

New Case IH Farmall Tractors

0.0% financing for up to 72 months oac

USED COMBINES

Up to 18-month free financing on all used combines – OAC

(2) Gleaner R60 combines with 30-ft. headers......... .......................................................... Just Traded Vermeer 605L round baler, 6x5 bales, twine, floatation tires. Very good condition......................... $12,900 Vermeer 605F round baler, twine.................... $1995

Flexi-Coil System 65 sprayer, 90-ft. boom, 1000 gallon, Auto Rate........................................... $8995

USED INDUSTRIAL

USED AIR DRILL

Concord 4010 air drill, tow behind 3000 tank with hydraulic fan...............................................Just In

MISCELLANEOUS EQUIPMENT

Valmar 3255 granular applicator. Previously mounted on Flexi-Coil System 85 heavy harrow. Very good condition...................................................... $2995 Mayrath 8x60 grain auger, swing hopper, PTO drive............................................................ $3995 Meyer ditcher, near new blades. Good condition...... ...................................................................... $895

USED VEHICLES

1976 International 1600 cab/chassis with service body, PTO hydraulics, hydraulic crane, air compressor with large capacity tank, extra fuel tank, gin pole crane with winch. An excellent field service unit. Asking $17,900..............Reduced to $15,250

NEW & USED HEADERS

Case IH 1042 36-ft. draper header, pickup reel. Excellent shape...................................................Just In 1995 Case IH 1010 15-ft. pickup header, Victory attachment........................................... Just Traded Case IH 1015 pickup header, Victory attachment..... ...................................................................Just In International 810 13-ft. pickup header, Rake-up raking pickup. Very little use............................. $8995 New Holland 960 13-ft. pickup header with Sund attachment.................................................. $2995 New Holland 960 13-ft. pickup header less attachment............................................................ $1495 Massey 1859 13-ft. pickup head less attachment..... ...................................................................... $995

SPECIAL PURCHASE

1980 IHC 412B 11-yard elevating scraper with good rubber. Excellent maintenance and ready to work. ................................................................. $24,900

Thanks to you our lot is getting bare...

WE NEED YOUR TRADES!!

MacDon pickup reels for MacDon and Case IH draper headers (1) 36-ft.......................................... Call for pricing

SAVE UP TO

50%

on custom-made round baler belts and swather canvas. We also repair round baler belts.

BIG SKY EQUIPMENT

Phone 406-278-3277 Toll-free 1-800-332-7541 Toll-free 1-888-4-CASE-IH FAX 1-406-278-7882 website: www.4caseih.com Conrad, Montana

After Hours call: Gary Brown Res. 278-3373 Mobile phone 788-9033 Kurt Christiaens Res. 279-3486 Mobile phone 450-3277

Trader’s Dispatch, October 2012 — Page A36

Say you saw it in the Trader’s Dispatch

10:00

Feeder Special and All Class Cattle Sale every Tuesday in October

& L I O GAS S

R TIE E P O R

Buying Oil & Gas Minerals Call Bill L Seerup at 406-652-4101 • 406-671-0559 or send full legal description to 4212 Rimrock Rd • Billings, MT 59106

B&B Auction Sale Saturday, October 27, 2012 Great Northern Fair Grounds Havre, Montana Sign for numbers 10:00 am - Sale Time 11:00 am - Lunch Avail-

EQUIPMENT

1993 Case 580SK extenda backhoe, 3700 hours, excellent condition. VIN #1T0310SJKBD210978. Ford 8N tractor, PTO, 3 point, nice clean unit.

HOUSEHOLD

Kitchenware/ Glassware/ Knick Knacks/ Davenport/ Easy chairs/ Pictures/ Bedroom sets/ China closet.

OTHER

Riding lawn mower/ Fish poles and accessories./ Miscellaneous items.

VEHICLES

2005 Chevrolet Impala 3-2003 Chevrolet Impalas 1998 Chevrolet Blazer 1991 Dodge 150 1987 Dodge 250 van 1985 Dodge 100 pickup with flatbed. 1981 Jeep 2001 Chevrolet Impala 1985 Ford dump truck. 1974 Ford F100 pickup. 1968 International 1700 truck. 1963 Dodge dump truck. 1985 Dodge 150 pickup.

SHOP

Hand tools/ Garden tools/ Power equipment.

BeefTalk: Calculating cost per unit is critical

By Kris Ringwall, Beef Specialist, NDSU Extension Service not have the actual analysis, feed tables The world of costs is not really that comcertainly would provide adequate numbers plicated, but often it is overlooked. to answer the question. Typical values in a Although it is true that feed must be edtable never are the actual numbers from an ible, free of digestive problems and comanalysis, but the concept of pricing per unit patible with the beef cow, that still leaves of desired nutrient still is valid. a large selection of alternative feedstuffs. The formula is simple. However, for peoRegardless of what one is feeding, the first ple in general, no formula is simple, so let’s step is figuring cost per unit of desired talk about it. We know our cost per bushel nutrients. is $7.94. We know typical corn could be 60 In very simplistic feeding terms, the pounds per bushel at 88 percent dry matter, world of the beef cow is somewhere be88 percent TDN and 9 percent crude protein tween green and yellow. If you were told (obtained from a reputable feed table). to eat all your vegetables as a youngster, To answer the question, we divide $7.94 the reasoning for it was simple: Vegetables by 60 (tabled value for bushel weight of contain nutrients that are needed to sustain a healthy state of living. corn) to get our cost per pound. The cost per Likewise, a cow is more likely to sustain pound of purchased or as-is corn is 13 cents. a healthy state of living when the feed she The pound of corn is 88 percent dry matter, consumes is a mixture of green and yelso we need to divide the 13 cents by .88 (dry low feeds. Feeding all corn without greens matter percentage) to get the cost of 1 pound is not good. Feedof corn on a 100 pering all straw or grain cent dry-matter basis. byproducts with no Now we know the cost greens is not good. per pound of corn on Feeding all seconda 100 percent dry-matcutting alfalfa with ter basis is 15 cents. no yellows is not However, because good. Feeding all the corn is at 88 perbrown, overly macent TDN, the cost on ture grass hay with a dry-matter basis per no green hay is not pound of TDN is 17 good. cents. The calculation A mixture of green involves dividing 15 grass with yellow cents (cost per pound corn could work. of dry matter) by .88 A mixture of older, (TDN percentage of yellow-looking hay corn). with first-cutting alNow a producer falfa could work. A knows what the typimixture of straw or cal cost is for the degrain byproducts with green leafy grass hay sired purchase. The same calculation could could work. be made for cost per pound of crude protein. In all cases, an appropriate supplemenUsing the previous numbers, we divide tation of minerals and vitamins is recom$7.94 by 60 to get our cost per pound of mended. 13 cents. These are basic thoughts that need to be We again adjust for 88 percent dry matter evaluated as one reviews options during by dividing 13 cents by .88 to get 15 cents feed shortages. In most cattle operations, the per pound of dry matter. These calculations most expensive variable expense is feed. If are the same numbers we calculated before, a producer accounts for feed waste all the but this time we divide by .09 (9 percent way through harvest, processing, delivery crude protein) to calculate cost per pound and cleaning, the actual cost per unit of of protein. In this case, 1 pound of protein feed can be calculated. Those costs often is costing us $1.67. are hidden in the busyness of ranching and Now we know that the corn that we were farming. However, writing checks as feed is thinking of buying costs $7.94 per bushel or purchased brings the message home quickly. 13 cents per pound as is. If we calculate a Today, producers need to buy feed. per-unit price, we know the corn costs us 15 The first lesson is a simple one, but we cents per pound on a 100 percent dry-matter may need to have our memories jarred loose basis, 17 cents per pound of TDN and $1.67 to recall lessons we learned in math class. per pound of crude protein. How does one convert prices to a common Producers need to seek good information unit so prices can be compared? (actual feed analysis results), but also keep I visited with Chip Poland, Dickinson in mind the answer will be different for each State University’s Department of Agricullocation and producer. ture and Technical Studies chair, to talk Again, producers need to price nutrients, about how he priced corn. not pounds of feed delivered. To do that, His example: One local elevator was producers need to seek the help of a very selling corn at $7.94 per bushel as is. So sound, well-educated, beef cattle nutritionhow much did the corn cost per unit of ist. total digestible nutrients (TDN) or cost per May you find all your ear tags. unit of protein? Even if a producer does #### The first Thanksgiving was not a feast, but rather a time when Native Americans helped Pilgrims by bringing them food and helping them build off the land. #### The traditonal cornucopia was a curved goat’s horn filled to the brim with fruits and grains. According to Greek legend, Amalthea (a goat) broke one of her horns and offered it to Greek God Zeus as a sign of reverence. As a sign of gratitude, Zeus later set the goat’s image in the sky, also known as constellation Capricorn. #### Fossil evidence shows that turkeys roamed the Americas 10 million years ago.

SowBridge educational series begins fifth year

The successful distance education program SowBridge will begin its fifth year November 7 and University of Nebraska-Lincoln (UNL) Extension swine specialist Duane Reese said suggestions from subscribers help maintain the program’s value.  “We asked participants for suggestions on topics and speakers, and are happy to provide current content on topics that people are interested in,” Reese said. “SowBridge provides all participants with the opportunity to hear directly from experts, and to contact those experts following the individual sessions.” Reese, who also is the Nebraska contact for SowBridge, said the program is intended for people involved in managing or caring for boars, sows and/or their litters, including operation owners, employees, technicians, managers and technical service providers. SowBridge is designed to improve the understanding and application of various tools and techniques involved in daily care of the breeding herd and piglets. “People from the United States, Canada, Australia, Ireland and West Indies took part in this past year’s program, and they told us they appreciated having the opportunity for all employees to participate in the sessions without requiring any travel or other expenses,” he said. “With the live phone presentation and slideshow viewed on computer, participants do not need Internet access and can take part from anywhere.” Entities with more than one location have the opportunity to add locations at a lower rate. Cost is $250 for the first registration from an entity and $125 for each subsequent subscription from the same entity. This provides access to one phone line per session and all program materials for each registration. Reese said materials, delivery process and program costs are slightly different for those with nonU.S. mailing addresses and encouraged potential subscribers from outside the U.S. to contact him at 402-4726425 or dreese1@unl.edu for more information. Before each session, U.S. subscribers receive a CD containing that session’s presentation, along with information on accessing the live speaker presentation. Most participants will call a toll-free conference line to listen to and interact with presenters. Each session begins at 11:30 a.m. Central Time and lasts approximately 45 minutes. Reese said the yearlong program is offered by subscription only with an October 15 deadline to ensure participants will receive materials for the first session on November 7.  A brochure with information and a registration form is available at http://www.ipic.iastate.edu/ SowBridge/2012Brochure IPIC.pdf. Nebraska residents who want more information can call Reese. SowBridge is sponsored by a group of 11 state universities from the nation’s major swine producing states.

Trader’s Dispatch, October 2012 — Page A37

$7800

Trader’s Dispatch, October 2012 — Page A38

MISCELLANEOUS

2011 New Holland 216 27-ft. hydraulic basket rake, manual controls, used very little. Tag #9927......... ................................................................. $20,000 1996 Haybuster 256 Plus II bale processor. Tag #9976.......................................................... $6000 Hesston BP25 bale processor, 1000 PTO. Tag #8867.......................................................... $4700 Hesstoon BP25 bale processor. Tag #10940.....$2500 DewEze trailer mount super slicer hydraulic drive. Tag #9301.......................................................... $3500 Straw spreader for JD 9660 STS combine...... $2000 MC 675 continuous grain dryer. Tag #9071..... $6000 Flexi-Coil 5000 air drill parts including full set of John Deere 7230 tractor Powr Quad transmispackers for 57-ft. drill, hubs, axles, bushings, wiring sion, 740 loader/grapple. harness. Tag #1339. New Holland 1049 self-propelled balewagon, duals, extra flotation tire. Tag #9642...................... $9500 2009 John Deere X324 all wheel steer lawn tractor, 48” Powerflo bagger. Tag #9887................. $4550 2005 John Deere LT160 riding mower with 42” deck, hydrostatic drive, 16-hp. Tag #1109............ $1550 2004 John Deere LX280 riding mower with 42” deck, bagger. Tag #163........................................ $3800 John Deere L130 riding mower, 48” deck, mulch kit, bagger. Tag #10884.................................... $1600 2004 John Deere SST15 mower. Tag #1539.. $1000 1990 Terry 29-ft. bumper pull travel trailer, oak interior............................................................... $7500 1997 Wilray 20-ft. gooseneck flatbed trailer with ramps. Tag #10260..................................... $3900 Donahue 45-ft. trailer. Tag #1411.................... $3000 New Kory 8278 12-ton farm wagon, 12.5x16L 14 ply tires. Tag #5201........................................... $3975 3-Ghenn 1/4-mile wheel lines. Each................. $4600 Two used wheel lines for sale. (1-Thunderbird) 2-Used wheel lines, 1/4-mile each. Each.......... $4500 6” and 8” mainline with risers..............................Call 2001 John Deere 9750 combine............... $120,000 Kirshner pivot track closer. Tag #9368........... $3200 1998 John Deere 9610 combine. Tag #9246............ Parker #88C-082 220-volt hydraulic hose machine ................................................................. $70,000 with Weatherhead T400 crimper. Includes complete 1995 John Deere 9600 combine with MacDon 960 die set. Like New $5950. Only..................... $2850 header, 20-ft. unloading auger, chopper. Tag #10790...................................................... $62,500 1994 John Deere 9600 combine with 930 header, batt reel, new header trailer. Tag #10782.........$60,000 1992 John Deere 9600 combine, 930 header, grain tank extensions, chopper, chaff spreader, pickup reel. Tag #10976....................................... $45,500 1983 John Deere 8820 combine. Tag #10779.......... ................................................................. $13,500 1997 Case 2188 combine, Maurer unloading auger extension, no header, 2940 separator hours. Tag #10674...................................................... $55,000

AS LOW AS OAC on USED COMBINES

2012 John Deere XUV625i Gator, poly cab with heater, 44 hours. Like new....................... $14,000 2010 John Deere Gator 825i cab, power box, front brush guard. Tag #11032.....................Coming in

New Equipment In Stock John Deere 7130 tractor MFWD, 3-point, PTO, 3 remotes, PowrQuad. John Deere 1830 60-ft. air drill with 10” spacing, tow between or tow behind 430-bushel carts. H&S wheel rakes. Wheatheart post pounders. Rem 2700 grain vac. Brandt 5200E 7500 hp grain vacs. Brandt drive-over grain belts. Degelman 6000 rock picker. Fast pull-type sprayers.

CONSIGNED EQUIPMENT CN-2010 John Deere 9770STS combine with 640D header, 481 separator hours, nice combine. Tag #10654.................................................... $336,000 CN-2009 John Deere 936D draper header. Tag #10433...................................................... $37,000 CN-2009 John Deere 635D 35-ft. draper head with pickup reel, transport. Tag #1413.............. $59,890 CN-2005 John Deere 630R 30-ft. rigid header, fore/ aft reel, pickup reel. Tag #10267............... $21,700 CN-2005 John Deere header transport. Tag #10268......................................................... $4950 CN-1994 John Deere 535 round baler, twine tie push bar, flotation tires......................................... $7500 CT-New Holland 688 round baler, surface wrap...... ................................................................. $12,000 CT-Vermeer BP8000 round bale processor with big tires.................................................................Call CB-New Holland 358 grinder mixer, 1000 RPM PTO, good shape. Tag #4568............................... $9000 CT-Degelman 9-ft. front blade for 2WD tractor...$2500 CT-Farmhand 258 loader with grapple and JD mounts......................................................... $6500 CB-1979 John Deere 310A tractor/loader/backhoe, cab, 24” bucket, 7750 hours. Tag #4569... $13,500 CT-Case 1490 2W 80-hp tractor with Leon 690 loader and grapple.................................................. $8500 CN-International 150 30-ft. 10” spacing box drills. Tag #9456.................................................... $1700 CB-1975 Ag Chem Big A 2500 self propelled sprayer, 1200 gallon stainless tank, 60-ft. boom with windscreens, Raven 440 rate controller, 3-way nozzle bodies, 3208 Cat (rebuilt 200 hours ago), Allison automatic transmission. Tag #4709.......... $15,000 CN-1100 GPM Cummins pumping unit with 25 KBA generator, 150-ft. of head................................Call CN-50 hp electric pump.......................................Call CN-6”, 8” mainline...............................................Call Large assortment of handline............................Call CN-Wade Rain center drive wheel lines......... $4250 CN-Used Thunderbird wheel lines....................Call CN-(2) 1400 lb. cast wheel weights for John Deere 30 series............................................................. $1400 CB-Valmar 240 skid mount granular applicator...$2500 CN-2011 Frontier 54” snowblower, 3-point, 540 PTO, hydraulic chute. Tag #9152......................... $2750 CN-1959 Chevrolet Viking 60 truck with 1990 7-ton tender box. Tag #10652.............................. $3350

1995 New Holland TR97 combine with 30-ft. headCOMBINE HEADER er, pickup reel, 13-ft. pickup attachment, Ag Loader computer, 200 hours on rebuild. Tag #10789.... MacDon D60/45 draper header, pickup reel, transport. Tag #10929.............................................. $60,000 ................................................................. $59,000 1994 Gleaner R62 combine, low hours, yield moni- MacDon 960 36-ft. header, pickup reel, transport. Tag #10827..................................................... $15,000 tor, MacDon 963 30-ft. header.................. $83,000

2010 John Deere Gator 4WD with cab, power box, Big Horn rims and tires, 120 hours. Like new....... ...................................................................Just in 2010 John Deere Gator 620i roof, windshield, manual box. Tag #10888.......................................... $8800 Degelman 14-1 14-ft. blade............................ $9400 2009 Arctic Cat Prowler XT650 with rebuilt engine. Tag #9522................................................... $7000 John Deere 59” 3-point snow blower. Tag #10328... .................................................................... $2000 Loftness snow blower. Tag #9430.................. $3000 2001 John Deere 1900 liquid applicator cart, 70-ft. booms. Tag #8935.................................... $17,500 Many used miscellaneous AMS items (displays, receivers, steering wheels)....................................... ..............................Call for price and availabiltiy Ezee-On 2400 pull-type post pounder, PTO drive. Tag #10998........................................................ $3900

Railroad Ties For Sale $10 each for #2’s $14 each for #1’s

Gun Safes In Stock!

Stop by and see our selection. Many sizes and colors to choose from. Great Savings on almost everything store-wide.

Choteau 1-866-466-5741; 406-466-5741 Conrad 1-877-278-5531; 406-278-5531 Cut Bank 1-800-273-5530; 406-873-5505 http://www.frontlineag.com

Trader’s Dispatch, October 2012 — Page A39

TILLAGE

USED TRACTORS

McFarlane HDL-1040-16 & HDL-1050-16 40-ft. and 50-ft.16 bar harrows..Call for preseason specials.

2011 John Deere 9530T track tractor, 36” tracks, PTO, low hours. Tag #10979.................. $344,500 2010 John Deere 9230 4WD tractor, 325 hp, front and rear differentiol locks, 18 speed powershift transmission. Tag #10684...................... $199,500 1995 John Deere 8870 4WD tractor, 24/6 manual transmission, 1000 PTO, 3 remotes. Tag #8608... ................................................................. $70,000 1994 John Deere 8970 4WD tractor, 24/6 transmission, 4 remotes, differential lock front and rear, Concord 12-ft. hydraulic angle blade, low hours. Tag #10684............................................ $105,000

Degelman SM7000 70-ft. spring spring harrow. Tag #10258..................................................... $13,900 1995 Case IH 9280 4WD tractor, powershift transmisMorris 70-ft. heavy harrow. Tag #10978...... $14,900 sion, 4 remotes, nice tractor. Tag #10675......$61,000 2011 John Deere 995 7 bottom plow. Tag #9951..... Big Bud 460/30 4WD tractor, Detroit diesel, power..................................................................$11,500 shift transmission, 50% rubber. Tag #10890......... ................................................................. $53,000 1981 Versatile 950 4WD tractor with 903 Cummins, standard transmission, 40% duals, approximately 9600 hours. Tag #10989............................. $9000 2011 John Deere 8285R MFWD, IVT transmission, 1000 PTO, 4 remotes. Tag #10938......Coming in Wil-Rich 12-bottom plow. Tag #10257..........$11,500 2009 John Deere 4520 compact utility tractor, tower reverser transmission, open station. Tag #8895... USED GRAIN VACS & AUGERS ................................................................. $19,500 1980 John Deere 4240 2WD tractor with 3-point, 540 2007 Brandt 13” x 90-ft. hydraulic swing away auger, PTO, cab. Tag #1628............................... $22,000 1370 hp.................................................... $18,000 1978 John Deere 4040 2WD tractor, 80 hp, Quad2003 Brandt 13” x 70-ft. swing hopper auger. Tag Range transmission, dual PTO, 3-point, front #1614....................................................... $14,500 weights. Tag #9950.................................. $19,000 Brandt 10” x 70-ft. swing hopper auger with Hopper 1971 John Deere 4020 2WD, ROPS, JD 158 loader Walker mover............................................ Just in with grapple, 3-point, 2 remotes, dual PTO..$14,500 1995 Brandt 7” x 35-ft. auger, engine drive. Tag 2009 Case Magnum 245 MFWD, cab, powershift #1409.......................................................... $4000 transmission, quick hitch, 3-point, dual PTO, 4 Wheatheart 13”x81-ft. swing auger, hydraulic mover, remotes, weight package. Tag #9432.... $142,500 540 PTO. Tag #10909.............................. $17,500 2002 New Holland TM165 MFWD, cab, loader, Wheatheart 10”x71-ft. swing auger. Tag #10891...... grapple, 4 remotes. Tag #10382.............. $78,000 .................................................................... $6325 Rem 3700 grain vac. Tag #9963.................. $19,900 2011 Brandt 5200 EX grain vac. Tag #11022........... ................................................................. $19,500 2007 Brandt 5000 grain vac. Tag #9963...... $15,500 2004 Brandt 5000 grain vac. Tag #10922.... $10,000 Walinga 714 Deluxe grain vac................ Coming in

Ask about the Valley ‘After Season’ parts order specials AFTER HOURS SALES CALL:

Jack Hadcock 271-7839 or 899-5657 Burke McCormick 873-2813, 450-3606 Dan Lannen 590-4488 Jake Han 450-3605 Joe Flesch 239-2660 Jim Orr 289-0744 Pat Wheeler 450-1704 Barry MacGillivray 590-4703 Jamie Birch 570-3929 Ron Lipke 899-4993 Neil McCormick 470-2927

Choteau 1-866-466-5741; 406-466-5741 Conrad 1-877-278-5531; 406-278-5531 Cut Bank 1-800-273-5530; 406-873-5505

USED WINDROWERS & HEADERS

2012 John Deere R450 self-propelled windrower, bar tires, auxiliary lighting. Tag #10943........... $88,500

2-2011 Case IH WD1203 16-ft. auger header, 350 hours. Each............................................... $94,000

2003 John Deere 4895 windrower with 14-ft. 895 auger header, rubber conditioner. Tag #10460...... .................................................................. $51,000 John Deere 956 MoCo, 14-ft. center pivot. Tag #1474........................................................ $20,000

2003 John Deere 956 141/2-ft. MoCo, Impeller conditioner, 1000 PTO. Tag #1584................. $18,500

2003 New Holland 1475 16-ft. MoCo, rubber conditioner, hydraulic guard angle. Tag #10738..$14,000 New Holland 116 mower conditioner. Tag #10144... ..................................................................... $6000

USED BALERS 0% Financing for 3 years - oac

1987 Ford TW5 MFD tractor, 105 hp, 18.4x38 rears, 3-point, dual PTO, 4 remotes, new clutch, Westendork Quick Attach loader. Tag #9961... $19,000 Ford 5000 2WD tractor with cab, 3-point, 540 PTO, loader, bucket, grapple. Tag #10942........... $7900

USED SPRAYERS

2010 John Deere 4930 self-propelled sprayer, 120-ft. booms, stainless steel 1200 gallon tank, full GPS, extended warranty. Tag #9018............... $270,000 2007 RoGator SS1074 self-propelled sprayer, 100-ft. booms, 1000 gallon tank, Raven Viper Pro controls, foam marker. Tag #9745........................ $148,000 2002 Flexi-Coil 67XL wheel boom sprayer, 1000 gallon tank, Raven controls. Tag #9466... $12,000 Flexi-Coil 62 80-ft. wheel boom sprayer. Tag #9644. .................................................................... $2000 1993 Chevrolet C30 pickup with pickup sprayer. Tag #10410........................................................ $6500 Fast 9500E suspended boom sprayer.....Coming in

http://www.frontlineag.com

2011 John Deere 568 round baler, 1000 PTO, twine, hydraulic pickup lift, megawide pickup, push bar.. ................................................................. $38,700 2003 John Deere 567 round baler, net/twine. Tag #10871..................................................... $22,000 2001 John Deere 567 round baler, 1000 PTO, twine only, 1-year-old belts, hydraulic pickup, push bar. Tag #10780.............................................. $12,000 John Deere 566 round baler, 540 PTO, gauge wheels. Tag #10196.............................................. $17,000 1984 John Deere 530 round baler, twine only. Tag #10726........................................................ $3500

2005 Case IH RBX562 round baler, net wrap, wide pickup, bale ramp. Tag #10739................ $18,500 New Holland 664 round baler, twine, Bale Command. Tag #10724................................................. $6900

Trader’s Dispatch, October 2012 — Page A40

USED DRILLS & ACCESSORIES

Flexi-Coil 5000 57-ft. air drill with 4350 tow behind cart, 12” spacing, variable rate, primary blockage. Tag #9601.

CHECK OUR FALL DEALS ON THESE USED DRILLS

2002 Case IH ATX 5012 50-ft. air drill, 12” spacing, ADX 3360 tow between cart. Tag #10209.

Flexi-Coil 5000 57-ft. air drill, 9” spacing, 3450 tow between air cart, nice shape. Tag #10488.

Concord ATD 4812 48-ft. air drill with 12” spacing, 3000 air cart. Tag #1498.

2000 Flexi-Coil 5000 51-ft. air drill, 9” spacing. Tag #1469. Flexi-Coil 5000 57-ft. air drill, 9” spacing, 3450 tow between air cart, steel packers.

Morris Maxim 50-ft. double shoot air drill, steel press wheels, 7300 tow behind cart. Tag #1635.

Flexi-Coil 5000 57-ft. air drill with 3450 cart, 10” spacing, variable rate, 550 trips. Tag #9494.

2009 John Deere 1870 56-ft. Conserva Pak drill, 12” spacing with 1910 430-bushel tow behind cart, double shoot. Tag #10208 John Deere 1820 air drill with cart...........Coming in

1997 Flexi-Coil 5000 57-ft. air drill, 9” spacing, 3450 tow between cart. Tag #9877. Concord 5612 56-ft. air drill, 12” spacing, Concord 3000 tow behind cart. Tag #8902.

John Deere 9450 drills, 40-ft. 12” spacing, rubber press, AcraPlant, JD transport. Tag #1605............ ................................................................. $15,900 John Deere 9450 box grain drills, 4-10-ft. sections, 12” spacing, transport. Tag #9643............... $9400 1993 John Deere 9400 40-ft. 10” spacing drills........ .............................................................Coming In 1989 John Deere 9400 40-ft. 10” spacing hoe drills, fertilizers, steel packers, 2” openers, transport. Tag #8951....................................................... $13,500

Choteau 1-866-466-5741; 406-466-5741 Conrad 1-877-278-5531; 406-278-5531 Cut Bank 1-800-273-5530; 406-873-5505 2001 Flexi-Coil 5000 57-ft. air drill, 12” spacing, 3450 tow behind cart. Tag #9912.

http://www.frontlineag.com

JOHN DEERE

JOHN DEERE JOHN DEERE

MISCELLANEOUS

New Holland 216 rake...........................................................$13,900 New Holland 216 unitized hydraulic rakes. ..............................$9900 Vermeer R23A twin rake...........................................................$7500 Sitrex MK10-12 rake..............................................................$10,500

Case 8465..............................................................................$11,500

New HAYBUSTER 2650 & 2800

SALES - SERVICE - PARTS

ATV’s - Utility - Motorcycles

BALE PROCESSORS Arriving Soon... Call for Pricing

JOHN DEERE

New MORRIS 900 8-bale HayHiker In Stock – CALL

MISCELLANEOUS ROUND BALERS

RAKES

JOHN DEERE

1-406-683-4281 • 1-800-683-4281

1025 Selway Drive, Dillon, MT 59725 www.dillonimplement.com After hours - Sales Craig Johnson 406-660-1158 Alden Cashmore 406-925-0319 Brian DeMars 406-660-0523 JOHN DEERE

JOHN DEERE

HESSTON SQUARE BALERS

2008 New Holland BR7090, net/twine, extra wide sweep, floatation tires. Very nice....................................................................$32,000 New Holland BR780A round baler........................................$23,900 2004 New Holland BR780 twine, extra sweep pickup, hydraulic pickup lift.......................................................................................$15,500 1998 New Holland 664 net/twine, hydraulic pickup loft, nice.... $10,000

JOHN DEERE

NEW HOLLAND SQUARE BALERS

2007 New Holland 580 square baler. 2 seasons use, like new........... ..........................................................................................$17,900 1994 New Holland 580 square baler, 16”x18” bales.................$8900 New Holland 320 square baler, 14”x18” bales, PTO drive........$3500

JOHN DEERE JOHN DEERE JOHN DEERE

NEW HOLLAND ROUND BALERS

JOHN DEERE

2004 New Holland 1432 13-ft. flail swing tongue...................$12,900 2003 New Holland 499 12-ft. haybine.......................................$9000 MacDon 4000 9-ft. mower conditioner......................................$4900

2-2012 John Deere 568 round balers, surface wrap, mega wide pickup, flotation tires. Approximately 5800 bales. Each ................$36,900 2-John Deere 567 round balers, surface wrap, mega wide pickup. ... .......................................................................Starting at $17,900 3-John Deere 566 round baler. .............................Starting at $9900

John Deere 4995, with 16-ft. disc header. 1400 hours..........$75,900 2009 John Deere 4995 4 meter, 994 head, V10, conditioner, button tires, 558 hours.................................................................$95,900 4-2010 New Holland 8040, 12-ft. HS headers, rotary screens, buddy seat, 800-1000 hours. Each..............................................$64,300 2008 New Holland 8040, 12-ft. HS header............................$61,900 New Holland HW305S with 14-ft. auger header....................$55,900 2005 MacDon 9352i Turbo, 14-ft. auger header, button tires, 1220 hours.................................................................................$57,000 Hesston 6400, gas, 12-ft. header, no cab.................................$3000

JOHN DEERE

MISC. PULL TYPE WINDROWERS

JOHN DEERE ROUND BALERS

JOHN DEERE

Morris 881 Hayhiker 8 bale......................................................$8500 Dwyer 5-bale mover / feeder.....................................................$7800 1973 Ford F500 buck rake, 390 V8, Farmhand F11C loader, forks, bucket, 4 new tires................................................................$4500 2010 Bobcat S650 skid steer with bucket or fork, excellent condition, low hours...........................................................................$36,200 Kirschner pivot track closer......................................................$3200 International 6200 14-ft. disc drill, combo with grass seeder attachment......................................................................................$7900 John Deere 995 7-bottom switch plow...................................$13,250 Brillion 15-ft. culti-packer.......................................................$12,900 Brillion 14-ft. culti-packer.......................................................$12,900 Brillion 30-ft. single row cultivator with crows feet....................$6500 John Deere 900 7 shank V-ripper.............................................$5490 Artsway 12-ft. land plane. Clean, one owner............................$6960 Kawasaki Mule KAF620 TRANS with hard cab, heater and 197-hours.............................................................................$9500

SELF-PROPELLED WINDROWERS

JOHN DEERE

2009 New Holland TD80 MFWD, 62 PTO hp, open station, ROPS.... . ........................................................................................$24,900 International 806 2WD, cab, standard transmission, Farmhand loader................................................................................$14,300 Sweepster broom, 10-ft., fits 5000 series John Deere.............$9000

2008 John Deere 8330, 225 hp, MFWD, PowerShift, duals, front weights, 4330 hours..............................................................................CALL 2010 John Deere 8295R, MFWD, PowerShift, 3 point, PTO and 2500 hours................................................................................. $189,900 2009 John Deere 8230, MFWD, PowerShift, 3 point, PTO, new front tires and 4711 hours................................................................CALL 2012 John Deere 7230, MFWD, IVT transmission, 3 point, PTO, JD 741 loader. 600 hours............................................................... $141,000 2012 John Deere 7230, MFWD, IVT transmission, 3 point, PTO, JD 741 loader. 700 hours............................................................... $141,000 2010 John Deere 7130, MFWD, PowrQuad, LH reverser, 3 point, PTO, JD H360 loader. 645 hours.................................................. $85,700 2010 John Deere 7130, MFWD, PowrQuad, LH reverser, 3 point, PTO, JD H360 loader. 1138 hours................................................ $82,900 2010 John Deere 7130, MFWD, PowrQuad, LH reverser, 3 point, PTO, JD H360 loader. 1296 hours................................................ $82,900 John Deere 7220 tractor with 741 loader, PowrQuad, 2 rear remotes, 3-point hitch, 540/1000 PTO, 300 hours.............................. $91,900 John Deere 6715 with MFWD and new Buhler loader. . .......... $54,900 John Deere 6115D, MFWD, 3 point, PTO, 2 hydraulics, 95 PTO hp, 9F/9R transmission with reverser, Mounted with JD 673 Loader. . .. ............................................................................................ $69,900 John Deere 6400 MFWD, John Deere 640 loader, 11,036 hours.......... ................................................................................................CALL 2007 John Deere 5325 MFWD, 55 PTO hp, open station, ROPS/canopy, new front tires...................................................................... $24,900 John Deere 5210 with 3 rear remotes, sync-shuttle transmission and 2900-hours.......................................................................... $13,500 2010 John Deere 5105M MFWD, 90 PTO hp, 540 PTO, cab, 16 speed, reverser, 563 loader, bucket, low hours............................... $64,700 2011 John Deere 5075M, 61 PTO hp, MFWD, 2 remotes, cab, 16 speed with reverser........................................................................ $43,500 2011 John Deere 3320 with 300 CX loader, hydro, 12 hours...$25,900

John Deere 7330 tractor with MFWD, PowrQuad, 3 hydraulics and JD 741 NSL loader with bucket, bale spear. 655 hours.....$95,000 John Deere 7800 tractor with MFWD, PowrQuad, air seat, 3 hydraulics, 540/1000 PTO, 14.9x30 front, 18.4x42 rear duals and JD 741 loader, joystick, 3 function valve, 6090 hours................................$69,900 International 3588 tractor with duals, 5600-hours. Engine overhauled at 5299-hours....................................................................$13,000 2007 New Holland HW305 self propelled windrower, 2007 NH HS12 auger header, 1233 hours..................................................$52,000 Morris 1400 Hay Hiker, 14 bale..............................................$16,900 Morris 881 Hay Hiker, 8 bale..................................................$10,900 Highline 5-bale mover, 6800 feeder..........................................$9500 John Deere 630 tandem disc with 9” spacing, 18” discs, hydraulic fold, hydraulic depth control.......................................................$19,900 John Deere 970 21-ft. culti-packer, hydraulics, ‘S’ tines, front & rear scrapers, rear hitch............................................................$19,900 John Deere 1610 22-ft. hydraulic fold chisel plow with rear harrow.... .............................................................................................$9900 International 6200 grain drill....................................................$6500 Brillion WM3001 24-ft. culti-packer...........................................$8500 Aerway 15-ft. aerator with transport hitch..............................$11,500 Schulte 148 15-ft. flail chopper, drawbar...................................$3500 Anderson rockpicker, 5-ft. working width, 540 PTO drive.........$1750 HMDE HD Grapple fits Farmhand F11 and JD 740 loader.........$900 Elston Gopher Getter..................................................................$750 New 2012 John Deere 550 S4 camo, roof, 3/4 windshield....$11,900

JOHN DEERE

CONSIGNMENTS

JOHN DEERE

TRACTORS & ATTACHMENTS

Hesston 4910 big square balers, 36,000 bales.Starting At $34,900

JOHN DEERE

Trader’s Dispatch, October 2012 – Page A41

JOHN DEERE

USED EQUIPMENT

JOHN DEERE

Trader’s Dispatch, October 2012 — Page A42

Pork industry faces record losses

FOR SALE

Cat 955L loader, 4-in-1 bucket, valve for ripper, low hours. SN 71J6221.... .................... $14,000 obo Ripper and clearing rake with grapple that fit this loader................$3000 ea

Phone (208) 926-7127, Kooskia, Idaho

MODERN MACHINING FACILITY * Largest Full Service CNC Machine Shop in Central Montana * CNC Machining with Production and Prototype Capabilities * Custom Machine Work * Gear Cutting * Internal Keyway Cutting

COMPLETE FABRICATION FACILITY New Custom Angle Pipe, flatbar and tube rolling capabilites * CNC Plasma Cutting * Brake, Shear and Roll Work * Specialty Fabrication * Stainless Steel, Aluminum and Mild Steel * Welding * Design Capabilities * Conveyor Design & Manufacturing TOLL FREE: 800-227-2203

427 Second Street South Great Falls, MT 406-727-2203

Open 8:00 AM to 5:00 PM, Monday - Friday

A tsunami of red ink is about to wash across the pork industry, which is facing losses unseen even in the fall of 1998 when hog prices at times approached zero value. According to a Purdue University Extension economist, the stressors include: more hogs than expected, rapid sow liquidation now under way, and record feed prices. Losses in the final quarter of this year could be $60 per head, exceeding the previous record quarterly losses of $45 per head in the fall of 1998. “Slaughter numbers in the past two weeks have been up 6 percent when only about 1 percent more hogs were expected,” said Chris Hurt. “This has caused a $10 per hundredweight drop in live prices since late July, with prices now in the low $60s. “The source of those extra hogs is probably related to some delayed marketings due to the summer heat, to a desire to sell pigs more quickly before prices really tumble moving into fall, and to high-sow slaughter. Projected prices for the final quarter this year are in the mid-$50s, using current lean hog futures as a base. Tragically, costs of production are expected to be above $75 per live hundredweight for the remainder of the summer, this fall, and winter,” Hurt said. Loss projections Hurt predicted losses per head this summer to be estimated at $30, followed this fall by record quarterly losses of $60 per head. Losses in the first and second quarters of 2013 are projected to be $38 and $5 per head, respectively. Over this one-year span, losses may average about $33 per head, meaning total losses of around $4 billion for the U.S. industry. “There is strong evidence that the initial wave of breeding-herd reduction began in early August and has intensified,” Hurt said. “Sow-slaughter data show that around 30,000 sows were liquidated in the month of August alone. This would represent a reduction of about 0.6 percent of the national sow herd in one month. This rate will continue, and perhaps even increase, if corn prices stay at current levels or move higher. The breeding herd may decline by 4 to 6 percent in the six months from August 2012 through January 2013. The rate of liquidation is expected to slow sharply after this coming winter,” Hurt said. Hurt described the dilemma for the industry to be the enormous losses for pigs that are already born. Continued liquidation of sows will not reduce slaughter numbers until next summer and so does not address the short-

We have a good supply of entrance archway poles! Call (406) 362-4222 for sizes and prices.

Bouma Post Yards

Visit our website: www.postyard.com or email: harold@postyard.com Phone (406) 362-4222 – Lincoln Phone (406) 466-2140 – Choteau

YOUR EXCLUSIVE OSMOSE WOOD TREAT DEALER

term financial disaster. “Short of euthanizing young pigs, reduction of weights can reduce total pork supplies, use less feed, and enhance hog prices,” Hurt said. “The economics of reducing weights is largely related to packer-buying programs. Generally, it is not economical for producers to sell at lighter weights that receive a discount. Perhaps packers would consider lowering those threshold weights in this emergency. Producers should recognize that this could be costly to packers and to not expect one packer to do so unless all agreed,” he said. Hurt said that President Obama authorized the purchase of a modest amount of pork. “That volume is so small as to reduce the losses by less than $1 per head,” Hurt said. “Other demand stimulation could help increase pork prices, but the program would need to be much larger and more money would likely have to come from a Congress that has not had a strong record of agreement or accomplishment in recent months. There remains a small amount of hope that a partial waiver of the ethanol RFS for 2013 could reduce corn use for ethanol and lower corn prices. However, evaluations at the University of Illinois, Purdue, and Iowa State all indicate that such a partial waver may have only small impacts on volume of corn used for ethanol. “Financial losses of the magnitudes projected here will cause massive erosions of family equity and some bankruptcies,” Hurt said. “Unfortunately, losses in 2008 and 2009 were not fully recovered by the profits in 2010 and 2011 so that some producers face this tsunami in weakened financial condition. “Family hog farms with a sizable land base will have land equity to draw on,” Hurt said. “Larger hog producers with a minimum land base will need to draw on corporate equity and then their lenders. Lenders will make the final decisions for the weakest, but will strive to keep companies in operation as they seek new buyers. This means that another round of consolidation of ownership can be anticipated,” he said. Hurt concluded by saying that unfortunately individual producers are going to need to find their own way through the short-term carnage. “The irony is that hog production may return to profitability by mid-summer 2013 when meal prices begin to moderate, hog prices move to record highs, and rain and reasonable temperatures bless our nation’s corn and soybean fields once again,” he said.

100 years of business

Two events were held to show appreciation to Torgerson’s customers, employees, industry business partners, friends and family for 100 years of business. On Tuesday, September 18th, Torgerson’s hosted a golf tournament at Marias Valley Golf Course in Shelby, Montana. The tournament included 100 players comprised of customers, employees and business partners. KMON hosted their morning show from the course. On Thursday, September 20th, Torgerson’s hosted their 100 Year Celebration at the Four Seasons Arena in Great Falls, Montana. Approximately 1000 people were in attendance for the evening. Dinner and entertainment were provided. Speakers for the evening were Jim Walker, Vice President of Case IH North America and Steve Bierman, President of CNH Capital. The entertainment for the evening included a performance by Expressions of Silence and a private concert by Aaron and Thea Tippin. KRTV featured the event on both of their evening news spots. Torgerson’s was founded in 1912 as a mercantile in Ethridge, Montana by Reier Torgerson. The company is now a farm implement dealer with 6 locations in Montana and is run by the fourth generation of Torgerson’s. ##### The old foot pad surface of a black bear sheds off and a fresh new one takes it place during hibernation.

Trader’s Dispatch, October 2012 — Page A43

Weaning calves early

By Jim Stordahl, Clearwater/Polk County Extension Service, Minnesota The exceptionally dry summer has created significant shortages of forages for livestock. Pastures especially have been decimated by the hot dry summer and many producers are looking for ways to cope with spent pastures and hay shortages. Weaning calves early may be one viable option. Greg Lardy and Carl Dahlen, Extension beef specialists at NDSU, recently provided the following article to help guide your decisions. Traditionally, calves are weaned at six to seven months of age. In typical spring calving herds in the northern Great Plains, this is usually October or November. However, during drought, forage is generally limiting and early weaning should be considered as a management tool. Time of weaning will have impacts on cow and calf performance as well as health and productivity of the native range or pasture. Lactation represents the greatest nutrient demand for cows during a year-long production cycle. Lactation increases demand for energy, protein, and other nutrients. One of the simplest ways to reduce nutrient requirements is to wean the calf. This practice can cut nutrient requirements by one-third to one-half depending on milk production of the cow. Early weaned calves can achieve adequate rates of growth if given access to a high quality ration. By the time calves are 3 to 4 months of age, they are consuming significant amounts of forage. At 6 to 7 months of age, calves will consume approximately half the amount of forage as a mature cow. Following weaning, dry cows will eat less forage than lactating cows, further reducing demand placed on the pasture. By removing the demands of lactation, acceptable pregnancy rates and calving season length can usually be maintained. Producers may consider early weaning only a portion of the herd. In that case, logical candidates for early weaning are cows nursing their first and second calves. These animals have nutrient requirements for growth in addition to maintenance and lactation. The nutrient requirements for lactation and growth are given higher priority than the need to reproduce. By removing the demands of lactation on nutrient requirements, growth and reproduction will receive a greater proportion of the nutrients available. Producers may also consider early weaning for cows that are in thin or poor condition. Calves have been successfully weaned as early as two months of age. However, this is not practical under most conditions. Weaning after five months is generally preferable to earlier time frames. To ensure the health and well being of early weaned calves, beef cattle producers must provide an excellent health and vaccination program. Be sure to work with your local veterinarian to properly design a health program which will work on your ranch. Early weaned calves should consume 2.75 to 3.25% of their body weight in dry feed daily. Rations should be palatable and free of dust. The most nutritious feeds won’t work effectively if calves don’t consume them. Offering a creep feed three to four weeks prior to weaning will help the calves adjust to eating processed feeds and make the weaning transition period less stressful. Grain byproducts, such as wheat middlings, barley malt sprouts, soyhulls, or whole oats all make excellent creep feeds and may be considered along with commercial creep feeds. Initially, calves should be offered long stem grass hay. Top dress the commercial feed or concentrate mix over the long stem hay for the first three to five days. Once the calves are consuming these feeds readily, you can begin offering mixed rations. Gradually adjust the calves to greater levels of grain and/or concentrates. Adding a liquid supplement such as molasses, condensed distillers solubles, or commercial liquid supplements will help control dust, improve palatability, and reduce sorting. Do not start calves on silages and other fermented feedstuffs. The fermented odor and flavor of these feeds can cause feed aversion in freshly weaned calves. Wait until the calves are consuming the ration adequately and then begin blending in these feeds. Place calves in a small, secure, well-sheltered pen or pasture after weaning. If possible, sort calves by weight into smaller pens so that small calves and large calves are not competing for the same feed and water. Early weaning may be one option to stretch tight feed supplies during drought. It’s may not be ideal, but considering the high cost of feed, it may be one cost effective option during a drought year. For more information, contact me at 800-450-2465 or stordahl@umn.edu. Source: Greg Lardy and Carl Dahlen, NDSU Extension.

Dura-Life

On Farm Fuel Containment Systems Custom designed to fit your needs to conform to the SPCC requirement

Wild Horse Seeds Several

Varieties

✓ NEW WB Quake (WB - PVP - CSO) ✓ CDC Falcon (WB - PVP) ✓ Morgan (WB - PVP) ✓ Genou (MSU - PVP) ✓ Rampart (MSU) ✓ Yellowstone (MSU - PVP) ✓ Decade (MSU - PVP) ✓ Willow Creek forage winter wheat (MSU) Have your seed custom cleaned and treated with the best treatments available

Cruiser Maxx Vibrance Cereals Custom Blend: Added pythium, fusarium and rhizoctonia control, excellent on dry seed decay and wireworm protection. Stamina - increased vigor under stressful conditions

Be sure to call us for all your grass, alfalfa and seeding needs. We stock a full line of alfalfa, pasture, CRP and lawn grasses

We Buy Native & Introduced Grasses CERTIFIED SEED PLANT — Specializing In: Cereal Grains, Grasses, Legumes

1 mile north of Havre on Highway 232 1-800-228-1928 or 406-265-5443

For sales information call Brad Ruhkamp, Nick Lowen or Dustin Ruhkamp.

Box 1028 Havre, MT 59501

www.wildhorseseeds.com WestBred®, Improving Nature’s Grains and the Wheat design are trademarks of Monsanto Technology, LLC.

Call Us For Your Price Before You Buy

1-800-228-1928

Trader’s Dispatch, October 2012 — Page A44

GRAIN TRAILER AND HEADERS FOR SALE

Got leaves? Make compost!

The old saying says, “If life gives you lemons, make lemonade.” An autumn adaptation might be “if life gives you leaves, make compost.” Composting has a long list of benefits and minimal effort and patience are greatly rewarded.  Composting takes advantage of a natural process, nature’s way of transforming plant “waste” into what gardeners often refer to as “black gold.” The finished product is the perfect soil amendment for gardens, planting beds and even lawns. It adds valuable nutrients released safely over an extended time. Compost also does a wonderful job of improving the structure and increasing water-holding capacity, drainage and aeration of the soil, plus it serves as a buffer to soil pH. Another benefit is the addition of beneficial organisms that have been shown to improve a plant’s ability to deal with insect and disease attacks. Compost simply makes the soil much more productive. The list of environmental benefits is also long. If you don’t compost it’s likely you bag all the yard waste and pay to have it hauled away, then drive to the garden center to buy soil amendments and fertilizers. By composting you reduce or eliminate the substantial energy, pollution and packaging waste involved with those steps. Compost also serves as a carbon sink, keeping carbon in the soil where it is an asset, rather than in the atmosphere where it is a liability. Composting works whether you are ambitious or… not. By putting in the extra work of precise mixing and frequent turning you can speed up the process, but if you’d rather not, patience is rewarded with the same final product. Either way, compost happens. Any plant material can be used to make compost. Ideally you will have a 1:1 ratio of high carbon “browns” (dry leaves, wood chips, straw) and high nitrogen “greens” (kitchen and garden scraps, grass clippings, coffee grounds), all slightly damp. Warm weather speeds up the process while cold weather slows or stops it. Short or long on materials? That’s a perfect time to get to know your neighbor or even your local coffee shop. Also, if you have room, it’s great to store leaves to use to mix with New Maurer 40-ft. aluminum hopper trailer, aluminum your kitchen scraps all year round. wheels, electric tarp.................................... $35,500 As soon as you start your mix a whole range of critters go to work for you, including bacteria, fungi, millipedes, pillbugs and earthworms. The army of workers you get depends on the components and conditions of your mix. High John Deere 6200 MFWD tractor, loader available........ volume, fresh mixes with plenty of nitrogen and appropriate .................................................................... $35,000 moisture will get hot from bacterial activity. Smaller, older 2007 John Deere 7930 MFWD tractor, ILS, JD 746 loader. AT ready......................................... $155,000 and high carbon mixes will be cooler with larger creatures, like pillbugs, doing most of the work. ONE ONLY 2013 Maurer steel grain trailer...... $23,000 Bourgault 5710 54-ft. air drill, 9 inch spacing, MRB, Done properly, compost does not create unpleasant aroNH3. ............................................................ $40,000 2013 Maurer grain trailers, air ride................... $30,000 mas. A sopping wet pile of grass clippings will stink (an2013 Maurer grain trailers, spring ride..................$27,000 John Deere 214 forage wagon........................... $3500 aerobic bacteria), while a damp, not wet, balanced mix of 1997 53-Ft. tri-axle flatbed trailer with hay sides.$12,000 Add $2000 for electric roll tarp. “browns” and “greens” will not. SEVERAL USED SNOWMOBILES - CALL Email: 2biglake@nemont.net You can speed up the process by frequently aerating (mixing) your compost pile and adding water if dry. Taking these steps will get you finished compost in as few as two months. If you’d rather not go to the trouble – don’t. (406) 766-2300, Call Dale, 963-7512 cell, or Dean, 480-0347 Be patient and you will have compost in a season or two, again, depending on the components and condition of your mix. Chopped, damp maple leaves decompose rapidly while whole, dry oak leaves seem to last a lifetime. Your compost is complete when it’s broken down to mostly tiny, dark pieces with an earthy aroma. Put it to use by incorporating it into your garden soil or planting beds or using it as a potting mix. It can also be beneficial when used as a light topdressing on turfgrass. So consider avoiding the hassle and expense of 302 Truck Bypass bagging and trashing all those Lewistown, MT 59457 leaves this fall and instead look at them as the valuable 406-538-9435 resource they are. 2009 Stoughton 40-ft. aluminum grain trailer, air ride................................................. $29,500 2-2007 Honey Bee 36-ft. headers with Case IH adapters................................. $45,000 each. Phone (406) 355-4358 home or 390-0996 cell, Rudyard, Montana

N.F., Inc. ~ froid, mONtANA

Lewistown Polaris 1-800-823-0226 visit our web site: lewistownhonda.com

Trader’s Dispatch, October 2012 — Page A45

Stretch Your Fall Pasture

Your grass is drying out... Keep adding pounds this fall with BGF-30

Protein is often the first limiting nutrient on most forage programs, minerals and vitamins play an important role in helping cows stay healthy and in maintaining reproductive efficiency. CRYSTAL-PHOS™ is a weather and waste proof mineral supplement that cows will consume readily along with BGF-30™. Place a BGF-30™ barrel with every 20-30 head of cows and a CRYSTAL-PHOS® barrel for approximately every 40-70 head. Studies have shown that cows will consume mineral better from CRYSTAL-PHOS. Try the “combo” program ~ it works!

BEN TAYLOR INC.

Taylor’s Farm Store Ben Taylor Valier

BTI Feeds

Call toll-free 1-800-873-0336 — Local 406-873-4433 Highway 2 East, Across from railroad crossing, Cut Bank Bulk Plant toll-free 1-888-878-2812 — Local 406-873-2812

Call toll-free 1-866-279-3360 Store & Bulk Plant 406-279-3365 – Shop 406-279-3693 Cut Bank Highway - Valier - Highway 44 East

Farm Store toll-free 1-888-220-5547 — Local 406-434-5547 Bulk Plant toll-free 1-800-824-8366 — Local 406-434-5546 Chemical Warehouse 406-434-5253 — Store on Highway #2 in Shelby

POSTS

— Full Pressure Treated — — Pointed and Capped — —All Sizes Available —

STOCK TANKS

Call for semi load prices delivered anywhere Gallagher electric fence products

Steel – Fiberglass — Poly

Goulds Jet & Submersible Pump Water Systems

Diacon-D and Insecto grain protectants B & W and Caldwell aeration systems. WOOD PELLETS

10%

DISCOUNT

When you buy pellets by the ton

Solve rodent problems with “Gladiator”

Roller chain Sprockets Hubs Grade 5 bolts

Nichols Sweeps

Conventional, Ultrawing, Klip Wing and conventional sweeps, spikes and drill shoes at Taylor’s Farm Store, Shelby

Available at Taylor Farm Store

BALER TWINE & NET WRAP IN STOCK See BTI Feeds in Cut Bank for…

A complete line of fall vaccines including pre-conditioning shots for calves Order your fall wormers & weaning pellets early.

Stur-D cattle guards & bale feeders We make up hydraulic hoses in our Shelby & Valier stores

15% off all gallons paint

At Taylor’s True Value - Shelby

Grain Hoppers Scoop Shovels Barb Wire

PROPANE

Installations • Delivery • Inspections

Call 1-800-824-8366

Trader’s Dispatch, October 2012 — Page A46

Say you saw it in the Trader’s Dispatch

FOR SALE Barley crop got hailed

3x4x8 1650 lb. large square bales. 6% protein, 8% moisture, 56% TDN, .15 nitrates 1000 ton available. $150/ton F.O.B. farm north of Cut Bank, MT Phone Don (406) 336-2141 or (406) 229-0422

Doane Western 252 Cirque Drive, Bozeman, MT 59718 www.doanewestern.com

Specializing in: Long Term Farm and Ranch Loans FSA Guaranteed Loans Statewide Service

Farm and Ranch Loans Call for Current Rates Bozeman (406) 587-1201 Toll Free 800-446-1112w Website: www.doanewestern.com

Best Available Rates

Long Term Real Estate Loans Refinance at Lower Rates, Consolidate Debt, New Purchases

CASCADE

MACHINE & SUPPLY Auger Flighting In Stock

4”, 6”, 7” & 8” The World’s Leading Roller Chain Manufacturer

Roller Chain

Made In The USA

Brian Christiaens Cell: 406-750-8939

Industrial Supplies: QD Sheaves & Sprockets V-Belts Conveyor Belt Hydraulics: Hydraulic Hose & Fittings

Machine Shop Services: CNC Custom Machining General Machining Specialty Welding Service Farm & Ranch Repair Round Baler Belt Repairs

Bob Larance Cell: 406-750-8938

Jeff Herzog Cell: 406-750-4632

CASCADE MACHINE & SUPPLY

401 4th Avenue South • Great Falls, MT 59405 406-453-8100 or 1-877-453-0166 FAX: 406-453-1127 www.cascademachineco.com

OSU finds Oregon’s first honeybee infected by ‘zombie’ fly

A researcher at Oregon State University (OSU) has reported Oregon’s first documented case of a “zombie” fly infecting a honeybee, but he doubts that the parasite at the moment poses a threat to the already beleaguered bee, which is a vital pollinator of some of the state’s key crops. Ramesh Sagili, a honeybee specialist with the OSU Extension Service, stumbled upon a belly-up bee on a sidewalk under a street light on campus in Corvallis one morning in late July. He placed it in a vial in his lab, and four days later seven maggots crawled out of the bee’s neck. Almost three weeks after that, one matured into an Apocephalus borealis fly, commonly called a zombie fly because of the disoriented behavior it is suspected of causing the bees to exhibit at night. The finding comes amid rising concern about the health of honeybees, which have been hit by a mysterious phenomenon called colony collapse disorder in which adult honeybees disappear from a hive, either entirely or in large numbers. It came to light in late 2006 when beekeepers on the East Coast began to see their honeybee colonies dwindle. The disorder has since spread to other states. A cause has not been determined, but suspects include mites, viruses, malnutrition, pesticides, a lack of genetic diversity, and stress that results from commercial hives being trucked around the country to pollinate crops. Sagili doubts that the fly is playing a role in the widespread die-off of honeybees, which are crucial pollinators for various Oregon crops, including blueberries, pears, cherries, apples, clover, cranberries and vegetable seeds. “It’s a stretch to say the fly is correlated to colony collapse disorder,” he said. “At this point, I don’t think it’s a threat. I don’t think it’s at the level where it can depopulate hives in large numbers.” Earlier this year in a journal article, researchers in California became the first to document that the fly attacks honeybees. They discovered the parasite in honeybees in California and South Dakota, the only states besides Oregon where fly-infected honeybees, or ZomBees, have been reported. The fly is known to parasitize bumblebees but little is known about its impact on them in Oregon, said Sujaya Rao, an entomologist at OSU who studies them. Sagili hypothesizes that the fly is just now being found in honeybees because it may be trying to branch out from its other hosts when they’re not available. He added that

TRUCKS & CATTLE TRAILER FOR SALE

2006 Peterbilt quad axle, 639,000 miles, 475 Cat, 18 speed, 285” wheelbase, 24.5 tall, loaded.............................................. $71,000 2000 Peterbilt quad axle, 760,000 miles, 475 Cat, 10 speed, 260” wheelbase, 24.5 tall.......................................................... $28,000 2008 Merritt quad axle, 53-ft. cattle/hog combo, deep back rear tag steer and lift......................................................................... $72,000

Call 406-868-1293, picture available – Brady, MT

although honeybees are widely studied, it’s possible that scientists just never saw the parasite because they usually preserve their collected bees in alcohol, which would kill the larvae and keep them from popping out. The brownish-red fly, which lays eggs inside the bees and is smaller than a fruit fly, is native to North America and has been found in Canada and various states that include Alaska, Georgia, Maine, Minnesota, New Mexico and New York, said Brian Brown, the curator of entomology at the Natural History Museum of Los Angeles County and an expert on the parasitic fly. Brown said the fly has been in Oregon for thousands of years but has just never been found in a honeybee in the state until now. In 1993, he identified a fly from Oregon as being an Apocephalus borealis. He doesn’t know, however, when it was actually found because it was part of a museum’s collection he borrowed. In 1934, a collector found the fly just south of Oregon in Gasquet, California, near Crescent City. Oregon was home to 56,200 commercial honeybee hives last year, according to a report from the OSU Extension Service. About two dozen beekeepers owned 90 percent of them, Sagili said. Every year, Sagili and retired entomologist Dewey Caron survey the state’s commercial beekeepers to find out how their hives are faring. Between October 2010 and April 2011, they lost 17 percent of their combined hives versus the same period a year earlier, Sagili said. In 2009-10, they lost about 25 percent, he said. To find out if the parasitic fly is playing a role in the losses, Sagili has placed traps by hives at two locations on campus and is encouraging commercial and hobby beekeepers to do the same near their colonies. Instructions on making traps (https://www. zombeewatch.org/tutorial) can be found online. People who don’t raise bees can also become ZomBee hunters just by collecting dead or dying honeybees they might find under porch or street lights. Sagili recommends placing the bees in a jar with multiple layers of cheesecloth secured over the top with a rubber band to let in air. Collectors should watch for the possible emergence of maggots. If they do find the parasite in the bees, they are encouraged to email Sagili (http://extension.oregonstate.edu/employee/ramesh-sagili#email-form). They can also submit their findings to the ZomBee Watch website (https://www.zombeewatch. org) so the fly’s whereabouts can be posted on an online map.

Hoven Equipment sales staff - Ag Equipment Consultants

Sean Hoven, Ken Poser and Ed Simon recently graduated from International Ag University’s unique sales program as Ag Equipment Consultants. The Ag Equipment Consultant is the new generation of sales professionals who will help farmers develop strategies for acquiring farm equipment and who will define how farm equipment is sold in the future. Currently employed salespeople learn different aspects of sales while putting this learning into practice in the field. They progress through basics, business selling and consultative selling designed to teach them now to service their clients in a consultative manner. IAU graduates bring a professional approach and see things through the eyes of the customer. They are consultative solutions providers rather than iron peddlers. They take a long-term view of selling and bring surprise added value to their customers. This differentiates them.

Moth evolves to survive in mountains

A moth that scientists released into the wild in Oregon mountains to control a poisonous invasive weed has unexpectedly evolved to survive the cooler climate, according to a new study. The cinnabar moth was introduced in the Cascade and Coast ranges 23 years ago to keep tansy ragwort from overtaking clear-cuts. The insect, which in the caterpillar stage has a voracious appetite for tansy leaves and flowers, was originally used only at lower elevations to control the bright yellow weed, which is toxic to horses and cattle. Researchers were surprised by how quickly the insect evolved to thrive in the cooler, higher elevations and shortened growing season. They found that through natural selection, its life cycle was altered so that now the insect develops from egg to the overwintering pupa more quickly than its cousins in the warmer Willamette Valley. “It was commonly assumed that if mobile organisms found themselves in unsuitable environments, they would move rather than stay put and evolve,” said one of the study’s co-authors, Peter McEvoy, an ecologist at Oregon State University who has studied the moth for 35 years. The findings have relevance in terms of global climate change, said McEvoy, adding that studies show that species naturally shift to higher latitudes and higher elevations as climates warm. The results are also significant because the cinnabar moth is just one of more than 70 living organisms – most of them insects – used to control more than 30 types of invasive plants in Oregon. If it’s changing, others might, too. But that might have negative effects on the environment, McEvoy said. For example, a previously innocuous insect might evolve into an invader that feeds on valuable crops or native plants in its new setting, he said. However, he added, after more than two decades of close study, researchers have not detected any negative effects from the cinnabar moth on native plants in mountainous environments. “Harnessing the potential of insects to provide effective control is a great tool in fighting invasive species,” McEvoy said. “And whether an organism must evolve to be effective or whether its evolution could threaten desirable plants are two sides of the same coin and warrant careful study.” McEvoy hopes that one-day researchers will be able to predict how an insect might evolve. And if they are able to do that, regulators should take into account any potential changes in insects before they approve them for use in controlling undesirable plants, he said. The study, published in the July issue of Evolutionary Applications, is available online (http://ir.library.oregonstate.edu/xmlui/handle/1957/31356).

College a little sweeter

As the sugarbeet industry grows in size and capability, Syngenta is investing in the future of several agriculturally focused college students interested in taking a lead in sugarbeets. For the third year in a row, Syngenta awarded scholarships through the annual Syngenta Sugarbeet Scholarship program. The 2012 winners are Stephanie George of Moxee, Washington; Connor Cook of Baker, Minnesota; Aleighica Keeran of Torrington, Wyoming; and Matthew Singer of Vassar, Michigan. Each applicant answered an essay question about what has had the biggest impact on the sugarbeet industry and their vision for future improvements. Applications were evaluated for creativity, flow and professional appeal. The winners were chosen out of 42 applicants, all with an involvement in 4-H or The National FFA Organization (formerly Future Farmers of America). One scholarship recipient summarized her thoughts on the future of sugarbeets when she wrote, “By continuing research, selecting for improved characteristics, and implementing more efficient farming practices, I believe that the sugarbeet industry will successfully meet the demands of consumers in the years to come.” Sugarbeet scholarship opportunities for 2013 will be announced by Syngenta at the American Sugarbeet Growers Association meeting in San Diego, California, in February. Additional information about scholarships from Syngenta can be found at the Syngenta Scholarships website. For more information, visit www.SyngentaSugarbeetScholarship.com, and follow us on Twitter and Facebook.

Trader’s Dispatch, October 2012 — Page A47

BALE PROCESSOR FOR SALE Brandt bale processor, for big rounds and big squares, wet or dry, self loading, 1000 RPM PTO, used very little........................................... obo Phone (208) 267-2266, 659-2270 or 659-2939, Naples, Idaho

$8500

Winter Wheat Seed

Winter Wheat Varieties

▲ Yellowstone ▲ Willow Creek ▲ SY Wolf ▲ AP503CL Clearfield ▲ Ledger, Falcon, & Quake — OTHERS AVAILABLE —

• Proceed

Treats available: • Stamina • Attendant for wireworm

Silax 100 Hay Preservative Bale your hay at higher moisture levels to retain leaves and increase quality. Costs approximately $2.50 per ton. This is NOT an acid product. Silax 100 is a unique blend of anaerobic bacteria and enzymes.

Our customers tell us this is the best preservative they’ve ever used.

AC Saltlander demonstrates exceptional salinity tolerance equal to tall wheatgrass, better than intermediate wheatgrass and exceeds NewHy RS Wheatgrass in performance. Pasture mixes for dryland and irrigated applications. Ask our agronomist about a blend designed specifically for your needs. Alfalfa: A good selection of brands and varieties for fall seeding. Siberian millet for late seeded and fast growing pasture or hay. Lawn & grass seed: Custom blends for sun, shade, irrigated or dryland.

Grass Seed Wanted

Do you have clean stands of introduced or native grasses? We buy grass seed.

2380 US Highway 89 Fairfield, MT Toll Free: 800-572-4769 Fax: (406)467-3377 Email: treasure@3rivers.net for Sales please call Chad Becker or Scott Gasvoda

Trader’s Dispatch, October 2012 — Page A48

GRAIN TRAILER FOR SALE

2005 Timpte grain trailer, air lift, 3rd axle, newer electric roll tarp, 50-ft.x72” sides. Nice condition................ $34,900 Phone (406) 788-7359, Dutton, Montana

HAY FOR SALE 175 ton of 2nd cutting alfalfa, 22% protein, 162 RFV. 125 ton of 3rd cutting alfalfa, 21% protein, 172 RFV. 100 ton of spring wheat straw. All are in 5-ft.x6-ft. twine tied round bales. Phone (406) 357-4187, Chinook, Montana

Super Saving Sale Modulars starting at $50 per sq. ft.

SAVE

LOCK IN SALE PRICE, TAKE DELIVERY LATER! $1000 Save up to $20,000 on our Modular Clearance Homes • Homes starting at $53.00 per square ft. • Beautiful 2027 sq. ft. modular. Limited time Sale Price $107,431 • Gorgeous 1174 sq. ft. modular. Limited time only $85,900 • WOW!! Triplewide 2790 sq. ft. with covered deck and all the bells & whistles. SAVE $1000. 10 year warranty.

REDMAN (DEALER) NEW HOMES 406-248-1100 of the FUTURE www.redmanhomesyork.com

7239 South Frontage Rd., Billings, Montana 59101

A LEGEND IN RELIABILITY

Independent test of 65 to 70 gallon ice chest shows Engel keeps it cool the longest.

Approved for use in BEAR country!

Bradley’s digital Smoker is going to rock the outdoors Bradley’s Digital Smoker will make your culinary pursuits a pleasure. Digital technology means that temperature, time, and smoke are now completely controllable. Users can decide how much smoke they want, how long their food is going to be smoked for, and at what temperatures, with the push of a button.

3257

(406) 452-1246

We also carry a complete line of spices/sauces and MONTANA NATURAL LUMP CHARCOAL

1-800-378-1246

3257 Vaughn Road, Great Falls, MT 59403

Grazing corn stalks-feeding and other considerations

By Heather Gessner, SDSU Extension Livestock Business Management Field Specialist - charge on a per acre basis or on a head As with everything this year corn and per day basis. soybean harvest is ahead of schedule. For Last fall the going rate for grazing stalks many that means corn stalk grazing. Cattle went up, based on the conversations I had producers can find that to be a great benefit with producers, due to the large harvest and to them as pastures are out of grass. Removthe amount of ears on the ground. We do ing cattle so pastures have additional time not typically think of input costs dropping to recover from drought damage incurred in production ag, but this might be the year this summer is a potential benefit of grazing and the input cost that does. This will also corn stalks this fall. There are many aspects be variable across the state and even the to consider in 2012 that we do not usually county where you live. It is hard to make an face with this program. estimation about the amount of corn left in For several months there has been a lot of the field. But if the going rate in the fall of discussions regarding nitrates and the prob2011 was $7.00 per acre, and the corn was lems high nitrate levels in the corn can cause producing 200 bushels per acre and was 10 when it is put up for silage. Producers also foot tall we were talking about a lot of feed need to keep in mind that the nitrate will not available on a per acre basis. Adjusting for go away when the corn dries down or after a the 2012 crop year will likely need to be freeze. It is locked up in the stalks and only taken into consideration. the fermentation process will reduce nitrate The yield consideration also needs to be levels. This raises the concern that before taken into consideration if you are going you bale acres of stalks for grinding or other to rent fields on a per head per day valufeed use you should still test random areas ation. $0.50-$1.00 per head per day was a across the field. If you plan to buy corn stalk common figure paid for grazing last year. bales, ensure that there is an accurate nitrate Making adjustments due to fields with little test attached to the product you buy. Don’t to no corn production needs to be made. get caught buying someone else’s problem. What else needs to be considered when If you are planning on grazing the stalks you are going to rent stalks? Fences and you should also be doing some testing to water will be two of the big issues for the ensure you do not have a problem in the cattle producer. Water will be a big limitmaking. Cows will be pretty systematic ing factor this year. Many of the dams and about their consumption in the field eating sloughs that have been traditional water first the ears and leaves and then moving to sources during the winter months have the stalks as the “good stuff” is removed. dried up. Hauling water is expensive and If you have a nitrate level that is generally it is hard to ensure all animals are getting regarded as “blendable you will want to the water they need. Fences also become monitor this removal so they are not forced an issue and if an electric fence needs to be into eating the tougher, bigger stalks where ran and then taken down versus a barbwire the majority of the nitrate is stored. If the fence being around the field, that can be nitrate level is very high, you may not want factored in as well. to run the risk of aborting or killing cows Another consideration from the plant at all. More information on high, medium production side is the potential nutrient and low levels can be found in South Daloss due to the cattle or sheep eating the kota State University (SDSU) publication residue thus removing potential nitrogen EXEX 4015. sources, keeping in mind that nutrients Lastly, related to nutrition is to keep in are also returned to the field in the form of mind the other nutrients that the livestock manure. Making the determination about need in order to maintain body condition. the total amount removed due to grazing is Corn stalks are quite low in most vitamins something you need to figure and compare and minerals and the protein level is low as the price of applying fertilizer next spring. well. Vitamins and minerals are essential to Compaction has also been talked about as good herd health and supplements can be a potential issue, especially in areas where provided. Protein is required by the body the livestock are fed or bed down at night. to break down all the forage that is being Continually moving the feeding area can digested by the rumen. Proper supplementahelp to alleviate or minimize that concern tion will help keep the rumen functioning. If but should be discussed between the two you are using a non-protein nitrogen source, parties. such as urea, make sure you understand the As grazing stalks is a form of rental feeding restrictions related to their use, as contract, writing down the particulars: rate, you could cause other problems with incorwhen payment is due, feeding location rect use. movement requirements, and length of the The next question that will likely come grazing time whether that is a number of up is cost to graze the field. Both the cattle days or until the first snow storm and others owner and the crop farmer benefit to some should be written down to avoid potential degree when cattle graze corn stalks and the problems from arising. price to graze stalks usually reflects that. More information regarding grazing corn The feed benefit is obvious to see for the stalks can be found in the following SDSU cattle owner. The benefit to the crop farmer Extension publications and tools: comes in the form of reduced volunteer • Nitrate Poisoning and Prevention (http:// corn stands the next year. If there is a cornigrow.org/up/resources/02-2041-2012.pdf) soybean rotation, the situation of volunteer • Grazing Corn Stalks (http://pubstorage. corn can be eliminated with herbicides. In sdstate.edu/AgBio_Publications/articles/ corn-on-corn situations this can be trickier ExEx2044.pdf) if you are using similar corn varieties. It has • The Value of Crop Residue (http:// been a while but I actually saw cultivators igrow.org/up/resources/03-2000-2011.pdf) out in the fields again this year due to the • Crop Residue Fertilizer Calculator volunteer corn situation. (http://www.sdstate.edu/econ/extension/ So how do you determine a grazing rate index.cfm) for stalks? Two common methods are used

Recipe Patch By Geri Paul Bunyan Burgers

6 bacon strips, diced 1 cup sliced fresh mushrooms 3 thin onion slices 1 egg, lightly beaten 1 tablespoon Worcestershire sauce 1/2 teaspoon seasoned salt 1/2 teaspoon salt 1/2 teaspoon pepper 1/2 teaspoon prepared horseradish 1 pound ground beef 3 slices process American cheese 3 hamburger buns, split In a large skillet, cook bacon until crisp. Remove with a slotted spoon to paper towels. In the drippings, saute mushrooms and onion until tender. Transfer to a large bowl with a slotted spoon; add bacon. In another bowl, combine the egg, Worcestershire sauce, seasoned salt, salt, pepper and horseradish; sprinkle beef over mixture and mix well. Shape into six 1/4-in.-thick patties. Divide bacon mixture among three patties. Top with a cheese slice; fold in corners of cheese. Top with remaining patties; seal edges. Grill, uncovered, over medium-hot heat for 5-6 minutes a side or until a thermometer reads 160° and meat juices run clear. Serve on buns. Yield: 3 servings.

Multigrain Grilled Cheese Sandwiches

4 plum tomatoes, halved lengthwise 2 tablespoon(s) extra-virgin olive oil, plus more for brushing 1 tablespoon(s) sherry vinegar 1 thyme sprig 1 teaspoon(s) thyme leaves Salt and freshly ground pepper 1 small clove garlic, minced 8 slice(s) multigrain bread 3/4 cup(s) shredded Manchego cheese 3/4 cup(s) shredded smoked cheddar cheese 3/4 cup(s) shredded Gouda cheese Preheat the oven to 450°F. In a bowl, toss the tomatoes with the 2 tablespoons of oil, the vinegar, and thyme sprig and season with salt and pepper. Arrange the tomatoes cut side down on a rimmed baking sheet and roast in the upper third of the oven for 10 minutes, until the skins begin to shrivel. Remove the skins. Turn the tomatoes over and roast for 10 minutes longer, until softened and lightly browned. Sprinkle with the garlic and thyme leaves and season lightly with salt and pepper. Preheat a panini press or grill pan. Arrange the bread slices in pairs and very lightly brush 1 side of each slice with oil. Turn the bread-oiled side down and mound half of the cheeses on 4 of the slices. Top with the tomatoes, the remaining cheese, and the remaining bread, oiled side up. Grill until the bread is toasted and the cheese is melted. Cut the sandwiches in half and serve.

Outrageous Chocolate Cookies

8 ounce(s) semisweet chocolate, roughly chopped 4 tablespoon(s) unsalted butter 2/3 cup(s) all-purpose flour, spooned and leveled 1/2 teaspoon(s) baking powder 1/2 teaspoon(s) salt 2 large eggs 3/4 cup(s) (packed) light-brown sugar 1 teaspoon(s) vanilla extract 1 package(s) (12-ounce) semisweet chocolate chunks Preheat oven to 350 degrees F. Heat chopped chocolate and butter in a microwave-safe bowl in 20-second increments, stirring in between, until almost melted; do not overheat. In another bowl, whisk together flour, baking powder, and salt. In a mixing bowl, beat eggs, brown sugar, and vanilla on high speed until light and fluffy. Reduce speed to low; beat in melted chocolate. Mix in flour mixture until just combined. Stir in chocolate chunks. Drop heaping tablespoons of dough 2 to 3 inches apart onto baking sheets. Bake, rotating sheets halfway through, until cookies are shiny and crackly yet soft in centers, 12 to 15 minutes. Cool on sheets 10 minutes; with a thin metal spatula, transfer to racks to cool completely.

Trader’s Dispatch, October 2012 — Page A49

SHIP YOUR CALVES FROM HOME! Portable scales Montana State certified and inspected. $2/head to weigh and $1/mile from our place to yours. Call now to schedule your date or weigh and ship from our Ledger, Montana corrals $2/head. John and Candy Balkenbush (406) 278-3569, leave a message

Ask one of our many happy customers about our sales & service

411 North Main - Conrad, MT (406) 278-5915

Authorized Dealer for

Good selection of good used fiberglass toppers. WE NOW HAVE

TOPPERS

Generators

SEE OUR COMPLETE LINE OF PICKUP ACCESSORIES

▼ Brake Controllers ▼ Tool Boxes ▼ Hitches ▼ Running Boards ▼ Bug Deflectors ▼ And More!

IN STOCK A full line of RV parts and supplies

Used Trailers

2002 Dutchman 27-ft. 5th wheel with big slide. 1994 Jayco 30-ft 5th wheel with big slide.

Call us for your BEST deal

2013’s are here... Stop by and check them out! UNITED COUNTRY - SHOBE AUCTION & REALTY FALL AUCTION CALENDAR Jim & Pat Morrison “Moving” Auction Saturday, Oct. 13th, 10 a. m.

20 miles SW of Hobson, MT in Sapphire Village. Guns, Trailers, Shop & wood working tools, many near new. *****************************************************

Dave Gill Ranch Equipment & Open Consignment Auction

Saturday, Oct. 27th, Fairgrounds, Lewistown, MT

John Deere 5410 tractor w/loader, Ford 5000 tractor w/ loader, Ford 600 w/loader, 1996 Wilson 50-ft. hopper bottom grain trailer, livestock equip.; Donahue 16-ft. stock trailer, Hale 14-ft. stock trailer, WW 4-horse trailer, Steel round pen

See ad in this issue of Trader Dispatch.

Shirley Chapel Real Estate Auction Monday, Oct. 15th, 6 p. m.

308 Virginia St., Lewistown, MT 2 bdrm., 1 bath older home. Starting bid $25,000

Granville Stuart & Teddy Blue Abbott Auction Saturday, Nov. 3rd, Fairgrounds, Lewistown, MT

Featuring the private collection of Darrell Abbott, Teddy Blue’s grandson. Granville Stuart’s DHS brand, his Maynard 50 cal. carbine, his library & photos; CM Russell original pen & ink sketch, 5 orig. Will James pen & ink drawings, Win., Sharps & Springfield carbines, Teddy Blue’s A3 brand, Montana Territorial brand books Western Art, Indian artifacts. Call for brochures on all auctions @ 406-538-5125

ShobeAuction.com

Office: 406-538-5125 408 W. Main, Lewistown, MT Kyle: 406-366-0472 Jayson 406-366-5125 Nick: 406-451-3899

Trader’s Dispatch, October 2012 — Page A50

SPRAYER AND TRAILER FOR SALE

2001 Flexi-Coil 67XL 130-ft. field sprayer with Auto Rate, 1500 gallon tank, rinse tank, wash wand and windscreens. Field ready and stored inside............................................. $14,000 Ravens 42-ft. aluminum flatbed spread axle trailer with air ride. Good for hay or water.......... ..................................................................................................................................... $4800 Phone Scott Halverson, (406) 893-4442 or 783-7774, Scobey, Montana

www.agrasyst.com

EQUIPMENT FOR SALE 4x4 Tractors

2012 John Deere 9560R powershift, 800x38, ATR, 560 hp, 400 hours. #111.....$325,000 2011 John Deere 9530T 400 hours...$320,000 2010 John Deere 9630 powershift, 800x38 Michelins, 78 gpm hydraulics, ATR, active seat, 530 hp, 1200 hours, #021..$272,000 2010 John Deere 9630 800x38 Michelins, ATR, 530 hp, 1200 hours. #021..$269,000 2009 John Deere 9530 powershift, 710x38, ATR, 475 hp, 2015 hours. #230..$230,000 2008 John Deere 9630 powershift, 800x38, ATR, 530 hp, 1075 hours. #661..$255,000 2008 John Deere 9630 710x42, 78 GPM hydraulic, ATR, 530 hp, 1475 hours. #734..... ....................................................$235,000 2002 John Deere 9520 powershift, 800x38, ATR, 450 hp, 3957 hours. #942..$153,000 Lots of 9630 & 9530 Trac Tractor Inventory - CALL

Augers-New

Wheatheart 8x41 with SP, electric clutch, 27 hp..................................................$12,400 Wheatheart 8x51 with SP, electric clutch, 27 hp..................................................$12,700 Wheatheart 10x41 with SP, electric clutch, 35 hp.............................................$13,300

Augers-Used

Westfield 13x81 remote swing.........$12,000 Westfield 10x71 swing hopper............$6800 Westfield 10x71 swing hopper.............$5800

Miscellaneous

2008 Renn 1214 bag unloader, 10 or 12-ft. bags..............................................$32,000 NEW Dixie chopper lawn mower, Zero Turn, 23 hp, 44” cut...................................$5600

Air Drill

2008 John Deere 1895/1910 42-ft, 10” spacing, no-till drill, SPF, 430 tow behind cart, conveyor......................................$170,000 2004 Flexi-Coil 5000/2340 51-ft, 9” spacing, variable rate, tow between tank, 4” steel packers..........................................$69,000

Choose 2.9% APR oac on any

USED tractor, combine or sprayer

TRADES ARE WELCOME Call with “For Sale” items anytime!

Tractor/Loader

2010 John Deere 7830 MFWD, IVT, 480x46, 380x34, 746 loader, grapple, 165 PTO hp, 1250 hours. #565........................$155,000 2008 John Deere 7930 MFWD, IVT, TLS, 18.4x46D, 16.9x30, 746 loader, grapple, 180 PTO hp, 2100 hours. #484...$166,000 2008 John Deere 7430 MFWD, 20 speed PowrQuad, 18.4x42, 741 loader, grapple, 166E/140 PTO hp, 1750 hours...$126,000 2008 John Deere 7430 MFWD, 20F/20R, 18.4x42, 16.9x28, 741 loader/grapple, 166/140 hp, 2000 hours, #645.... $119,500 2008 John Deere 7330 MFWD, 20F/20R, 18.4x42, 470x28, 741 loader/grapple, 155/125 hp, 2050 hours, #646.... $118,000 2005 John Deere 7920 MFWD, IVT, TLS, 18.4x42D, 380x34, 746 loader, grapple, 170 PTO hp, 2800 hours. #001...$133,000 2005 John Deere 7820 MFWD, 20 speed PowrQuad, 480x42, 380x30, 746 loader, grapple, 155 PTO hp, 4930 hours. #144.... ....................................................$109,500

Combines

2012 John Deere S670 contour master, Pro Drive, 520x42D, 26 ft auger, 225/175 hours. #602.................................$305,000 2012 John Deere S670 contour master, Pro Drive, 650x38D, 26 ft auger, PC Tailboard, 250/175 hours. #905...................$320,000 2012 John Deere S680 contour master, Pro Drive, 650x38D, 26 ft auger, PC tailboard, 250/175 hours. #904...................$336,000 2012 John Deere S680 contour master, Pro Drive, 650x38D, 26 ft auger, PC Tailboard, 275/200 hours. #902...................$329,000 2011 John Deere 9770 STS Pro Drive, contour master, 530/480 hours, #555......$258,000 More inventory too numerous to mention!

0% APR 24 months, then 4.4% APR for 36/48 months

Sprayers

(5) 2009-2012 John Deere 4730 400-600 hours...........................$175,000-$225,000 (6) 2008-2012 John Deere 4830 200-1400 hours...........................$190,000-$270,000 (9) 2008-2012 John Deere 4930 350-2450 hours...........................$185,000-$290,000 (9) 2012 John Deere 4940 100-900 hours.... ......................................$285,000-320,000 Buy your sprayer NOW for next spring!

GL Appraisal & BROKERAGE

Glenn A. Larson

k (406)

850-0922 k

N.D. 4-H Foundation announces raffle winner

By NDSU Extension Service Ryan Leimkuhl of Aberdeen, South Dakota, is the winner of a Case IH Scout utility vehicle in the North Dakota 4-H Foundation’s statewide raffle. Leimkuhl said he purchased the ticket in Ashley, North Dakota, while visiting a business client because he likes to support worthy causes. “I used to be in 4-H, and we always had red equipment on the farm,” Leimkuhl, who grew up in Waubay, South Dakota, added, referring to Case IH’s red agricultural machinery. His name was drawn September 13 at the Big Iron Farm Show in West Fargo. Leimkuhl said his 9-year-old grandson already has plans for the Scout. The boy wants to use it to plant some trees on grandpa’s land. Leimkuhl said his other grandkids are pretty excited, too. He plans to use the Scout for pheasant hunting. This is the second year the North Dakota 4-H Foundation has conducted the raffle. Each year, it has raised more than $30,000. “After we pay for expenses, the funds will be used to support 4-H programs across the state,” said the foundation’s development director, Mylie Lavold. “More than $10,000 will go directly back to participating counties. Top-selling counties this year were Ransom, Morton and Barnes, all selling more than 400 tickets.” Top-selling youth were Alisha Letzring (Morton County), Lucas Subart (Kidder County), Connor McGregor (Morton County), Brady Carlson (Ransom County) and Sara Hatlewick (Stutsman County). They received cash prizes for their efforts. Besides raising money, the raffle helps raise awareness about what 4-H has to offer youth today and about the foundation’s support of 4-H programs. “We are deeply grateful to Case IH and the Roughrider dealer group for donating the Scout and being a great partner in this effort,” Lavold says. “Of course, the biggest thank you goes to each and every person who bought tickets.” 4-H is a community of young people across North Dakota learning leadership, citizenship and life skills. The North Dakota 4-H Foundation is 4-H’s private sector, nonprofit partner on the North Dakota State University campus. For more information about North Dakota 4-H activities, go to http://www.ndsu.edu/4h.

Be aware of identity theft

By Nicole Tiggemann, Social Security Public Affairs Specialist in Denver You should always safeguard your personal information such as date of birth, mother’s maiden name, and your Social Security number. Why? Because it’s that type of information identity thieves are after. You may think you’re safe simply by not carrying your Social Security card with you and not providing your personal information over the Internet or by e-mail. But scam artists have become tricky. Never reply to an e-mail claiming to be from Social Security and asking for your Social Security number or personal information. Identity theft is one of the fastest-growing crimes in America. Unfortunately, people impacted by natural disasters, such as the recent wildfires and hurricanes, could be particularly vulnerable to identity theft. A dishonest person who has your Social Security number can use it to get other personal information about you. Identity thieves can use your number and your good credit to apply for more credit in your name. Then, they use the credit cards and do not pay the bills. You may not find out that someone is using your number until you are turned down for credit or you begin to get calls from unknown creditors demanding payment for items you never bought. Someone illegally using your Social Security number and assuming your identity can cause a lot of problems. If you’ve lost your Social Security card and wish to replace it visit www.socialsecurity.gov to learn how to apply for a replacement card. Also, filing a complaint with the Federal Trade Commission is one of several important steps that victims of identity theft should take. If you think you’ve been the victim of an identity thief, you should contact the Federal Trade Commission at www.ftc.gov. Or you can call 1-877-IDTHEFT (1-877-438-4338); TTY 1-866-653-4261. Learn more about identity theft by going to www.socialsecurity.gov and reviewing our publications Identity Theft And Your Social Security Number and What You Need To Know About Misleading Advertising. Protect your identifying information.

Proposals due November 16 for 2013 national conference

A national network of agriculture professionals will address issues related to air, water, soil and climate at From Waste to Worth: “Spreading” Science and Solutions conference April 1 - 5, 2013 in Denver. Conference chair Dr. Mark Risse, University of Georgia, said “Our livestock and poultry learning center on eXtension. org prides itself on connecting the nation’s best researchbased science and top scientists to the people that need the information. We believe this conference will attract both groups and encourage dialogue between those that generate and use the information.” The call for oral, poster, panel and workshop proposals is now open and closes November 16. Submissions should address topics of air, water and soil quality, water resource impacts, watershed management, research and outreach methods or climate change. The conference is designed to provide the latest research as well as tools and programs that put research and knowledge to use in the field. Who should attend? “Representatives of commodity groups, environmental agencies, regulatory and policy agencies, government agencies, farmers, producers, technical service providers and consultants should submit proposals and attend the conference,” said Jill Heemstra, University of Nebraska Extension. The areas of emphasis are • Air, water and soil quality • Climate change • Environmental planning • Feed management • Manure nutrient management • Manure treatment technologies • Pathogens • Regulation • Small farms and beginning farmers • Manure storage, handling and mortalities • Manure value and economics • Case studies/on-farm experience • Harnessing innovative delivery methods The Livestock and Poultry Environmental Learning Center on eXtension.org is the host of the conference. The conference will include workshops, tours, posters, commercial exhibits and oral presentations. Submit proposals online and find more information on the conference at http://www.extension.org/63747.

Montana to host natural resource competition

Montana has been selected as the site for the 2013 North American Envirothon competition to be held August 4-10, 2013. Students from 45 states and 9 Canadian provinces/territories will meet at Montana State University in Bozeman, Montana to compete as finalists in the competition. During the week-long competition, teams will be challenged on their knowledge of a variety of natural resource issues including soils and land use, aquatic ecology, forestry, wildlife and a specially selected current natural resource issue. The current issue for the 2013 competition is Sustainable Rangeland Management: Achieving a balance between Traditional Agricultural Uses with Non-Agricultural uses on Montana Rangelands. Teams of five high school-aged students who win their state/provincial Envirothon competition advance to the North American Envirothon competition to compete for scholarships and prizes. The North American Envirothon is held in a different location in North America each year to expose students to diverse environmental issues, ecosystems, and topography. This will be the state of Montana’s first time hosting the North American Envirothon competition. “We are thrilled to be coming to the great state of Montana—a state rich in so many natural resources. The students will, no doubt, have an excellent experience that will impact them for years to come,” said Clay Burns, Executive Director, North American Envirothon. Many volunteers and funds are needed to host this event. Those who would like to contribute are urged to contact Shonny Nordlund or Heidi Crum co-coordinators of the event. Shonny Nordlund may be reached at (406) 538-7401 ext. 101 or by email at fcd@midrivers.com or contact Heidi Crum at (406) 444-6619 or hcrum@mt.gov.

Trader’s Dispatch, October 2012 — Page A51

##### Say you saw it in the Trader’s Dispatch Dear Pastor, I don’t understand why all religions can’t get along. The TRAILER & WINDMILLS FOR SALE priests, rabbis, and ministers 2002 EBY 7’x22’ aluminum stock trailer, 1 center divider, good condition. in Daddy’s jokes always seem 2-8-ft. windmills 1-10-ft. windmill to have a lot of fun together. Call 406-939-3816 Colby, age 9

Northern Prairie Auto Sales 100 Hwy 2 East - Wolf Point, MT 59201 - (406) 653-1160

0%/60 Months on Selected Vehicles

Call Jack Nelson, Terry Fast or Jason Partridge for details.

SOL

NEW

2012 DODGE RAM 3500

Laramie, Crew, Deep Molten, Sunroof, Heated/Vented Leather MSRP $57,625 - Drive Away Price $50,436

Black/Silver, Heated/Vented Dark Leather, Remote, Plus Much More! MSRP $56,305 - Drive Away Price $49,325

NEW

2013 CHRYSLER 300C

Luxury, AWD, 3.6L V6, 8 Spd., Ivory Coat, Panoramic Roof, Plus More! Loaded! MSRP $48,220 - Drive Away Price $45,976

NEW

Larado, 4x4, Mineral Gray, 3.6L V6, Trailer Tow, Blk. Htr., Cloth Interior. Nice! MSRP $34,605 - Drive Away Price $34,105

2012 DODGE RAM 1500

SLT, 5.7L Hemi, Black, Premium Cloth Buckets, Nav, Sunroof, Remote, Plus More! MSRP $44,930 - Drive Away Price $38,558

SXT, Ralley, 6 Speed Manual, Red, Back-Up Cam, Nav, 40+ MPG. MSRP $23,460

NEW

2013 JEEP CHEROKEE

NEW

2013 DODGE DART

2013 DODGE DURANGO

R/T, 5.7L Hemi, Sunroof, 2nd Row Buckets, Nav, Red, Black Leather Int., Trailer Tow. MSRP $57,625 - Drive Away Price $50,436

NEW 2012 CHRYSLER 300S Silver, Black Leather, Panoramic Roof, Nav, Loaded! Too Much to List!! MSRP $44,945 - Drive Away Price $41,372

Call for October rebates and incentives.

Pricing and offers may change at any time without notification. For full pricing details call Northern Prairie Auto Sales at 653-1160

www.northernprairieauto.com

Trader’s Dispatch, October 2012 — Page A52

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

Harvesting and drying corn

By Jim Stordahl, Clearwater/Polk County Extension Service, Minnesota Corn harvest is upon us and the drought has created additional concerns this year. The following timely article has been provided by Ken Hellevang, Extension Engineer at NDSU. Drought conditions stressed this year’s corn crop, leading to weak stalks and shanks. Weak stalks contribute to “downed” corn due to wind or other forces, and weak shanks contribute to “ear drop” and large field losses. Farmers need to check the condition of the corn in the field. Drought conditions also are leading to larger than normal in-field corn moisture content variations. Reports indicate some moisture content varies from 15 to 25 percent in the same field due to soil variations or other contributing factors. If kernel size or density varies along with the moisture content, the result could be “pockets” of wet corn in a bin. That occurs when grain segregates based on size and density as it flows into a bin. Generally, the smaller and denser material will accumulate in the center and the larger material flows to the perimeter of the bin. Using a distributor or “coring” the bin may reduce the accumulation of smaller material in the center of the bin. A September harvest also may cause in-bin drying problems. A natural-air drying system that provides an airflow rate of 1 cfm/bu (cubic feet per minute of airflow per bushel of corn) will dry 20 percent moisture corn to about 14 percent with North Dakota average October ambient air conditions of 50 degrees and 65 percent relative humidity. The estimated drying time is about 37 days, and the allowable storage time (AST) of 20 percent moisture corn at 50 degrees is about 65 days. Average ambient air conditions for September are 60 degrees and 65 percent relative humidity. An air drying system using average September conditions will dry 20 percent moisture corn to about 13 percent in about 37 days. The drying time is the same because the corn is dried to 13 percent in September and 14 percent in October, so more moisture is being removed during September. The concern with drying in September is that the AST is reduced to about 28 days. The drying time exceeds the AST, so a quality loss may occur before the corn gets dry and the entire storage life of the corn has been “used up.” Thus, problems also may develop during storage. The drying speed is related to the airflow rate, so the drying speed can be increased by not filling the bin with corn. For example, if the bin is only one-half full, the expected airflow rate will be about 2 cfm/bu and the drying rate twice what it is with an airflow rate of 1 cfm/bu. Running the fan only at night to dry with cooler air will lengthen the AST, but it also will lengthen the drying time. For example, running the fan for 12 hours at night during September will reduce the average air temperature to about 50 degrees, so the AST of 20 percent moisture corn is extended to about 50 days. However, the drying time also will be extended to about 75 days due to the fan only operating for one-half of the day. The storage life of corn produced this year may be shorter than normal, so farmers need to be more diligent with drying and storage management. This is because the storage life of grain grown under stressful conditions is normally shorter than that of grain developed without plant stress. For more information, contact me at 800-450-2465 or stordahl@umn.edu.

##### A little boy walked up to his father and asked him, “Daddy, how do you spell God?” The father replied, “G-O-D.” The boy wrote it down, then turned to his father once more and asked, “Now how do you spell ‘Zilla?”

Use repellents to reduce bluetongue risk in sheep

By University of Wyoming Extension Persistent drought conditions in Wyoming have increased the risk of bluetongue disease in sheep, which is vectored by biting midges. Scott Schell, assistant entomologist with University of Wyoming (UW) Extension, said the early spring and hot, dry conditions Wyoming has experienced favor the reappearance of bluetongue. “Drought conditions create a lot of mucky edges around receding water holes, which is biting midge larval habitat,” said Schell. “Drought also concentrates livestock around fewer water sources in late summer when the biting midge population peaks.” According to Schell, the only way to reduce the risk of bluetongue to sheep in Wyoming is the use of repellents. He said that long-lasting, insecticidal repellents, properly applied to sheep in the summer, provide economical protection from bluetongue. The repellents work by reducing the number of bites sheep receive from infective midges in the weeks just before the first frost, when the chance of infection is highest, he said. “Timely application of these repellents when the flocks return from summer pastures can protect sheep for a few weeks until the first frost kills off the biting midges,” said Schell. “Rams on late summer pasture should also be protected with repellents.” Cooperative research between UW Extension, the former USDA-Agricultural Research Service Arthropod-Borne Animal Diseases Research Laboratory and Montana State University showed that insecticidal repellents, applied as low-volume belly sprays or via treated ear tags, significantly reduced biting midge feeding. “The larval habitat for the biting midges cannot be treated successfully with insecticides,” said Schell. “The insecticidal ear tags provided longer protection but were more expensive to purchase and were slower to work due to the time needed for the insecticide to spread over a sheep’s body.” Schell said sprays are faster acting, but the protection provided from insect bites was of shorter duration. The last large outbreak of bluetongue occurred in Wyoming in 2007. “Symptoms can include high fever, excessive salivation, nasal discharge, swelling of the face and tongue, and, in some cases, a bluish coloration of the tongue,” said Schell. Many species of livestock and wildlife can get the disease from the bite of an infective biting midge. In Wyoming, the vector species is Culicoides sonorensis, an insect less than one-eighth of an inch long that prefers to blood feed on hoofed animals. However, the severity of the disease varies widely between species. “Cattle can get bluetongue but exhibit little in the way of negative symptoms but may have a high level of the virus that persists in their blood,” said Schell. “This may spread the virus into uninfected Culicoides midges that feed on an infected cow and then feed on other animals.” Sheep, on the other hand, can get very sick with bluetongue with 30-percent mortality of infected individuals possible, according to Schell. For more information, contact Schell at 307-766-2508 or sschell@uwyo.edu.

Black knot disease

By Ron Smith, Horticulturist, NDSU Extension Service Q: My chokecherry trees are starting to show symptoms of black knot disease. Is there a spray I can use for this problem? Would pruning the trees help? Also, I have two miniature rose plants along the south side of my house. Can I uncover them now? They are starting to get leaves. A: Yes, you can uncover your rose bushes. Keep a vigil on the weather so you are ready to provide some protection if the temperatures dip below freezing, which it is bound to do. Black knot is a fungal disease that is difficult to control just by pruning. However, pruning is one of the necessary steps. Cut a good 6 inches back beyond the visible fungal knot. Spray the tree with lime sulfur while the buds are closed. Once the buds open, spray with benomyl and captan. Be sure to follow label directions to avoid toxic damage to the tree. This is a very difficult disease to control, so the possibility of eventually having to remove the trees should be considered. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Trader’s Dispatch, October 2012 — Page A53

JOHN DEERE 148 LOADER & MOUNTS FOR SALE

3 spool valve, 6-ft. bucket, fits 20, 30 and 40 Series utility tractors, excellent condition..................................................................................................$5500

Serving The Ag Community Since 1969 Specializing in JD, International, Case IH & all other major brands of ag tractors

Dennis & Curt Lorang 2700 17th Street N.E. Black Eagle, MT Shop 406-727-2726 ✔ Engine rebuilds ✔ Transmission rebuilts ✔ fuel pumps ✔ injectors ✔ turbo chargers We can rebuild or exchange John Deere hydraulic pumps, hydraulic couplers & valves, brake valves, steering valves

AMERICAN

PIPE & SUPPLY CO. Havre, MT Parts — 406-265-5251 Pipe — 406-265-5251

Cut Bank, MT Parts — 406-873-4148 Pipe — 406-873-2258 Yard — 406-873-5087

Driscopipe Polyethylene All sizes in stock Call for price

Used Structural mechanical tubing 11/2” and 13/4” in 20- and 24-ft. lengths, .12 to .140 wall thickness 3

1 /4” – $1.05 ft.

New 23/8” Structural plain end tubing

Used 23/8” Structural Tubing

Trader’s Dispatch, October 2012 — Page A54

The deadline for phoning in advertising for the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291.

BALE CHOPPER FOR SALE NDE 1652 bale chopper, used very little, in excellent condition

$20,500

Phone Rick Kimbell, (406) 250-2094 or (406) 257-5057, Kalispell, Montana

2003 Chevrolet 1500HD 4x4, crew cab, automatic, air conditioning, tilt, cruise, power locks, power windows, AM/FM/CD. Tag #12T138A......................$13,495

2003 GMC 2500 4x4, extended cab, long wheelbase, 6.0L, automatic, air conditioning, tilt, cruise, power locks, power windows, tow package. Tag #12T95A..........$13,495

2009 Chevrolet 1500 4x4, short wheelbase, 5.3L, automatic, air conditioning, tilt, cruise, XM radio, OnStar, Bluetooth, remote start. Tag #12T48A........$28,495

2010 Chevrolet Equinox 2LT AWD, heated leather, power locks, power windows, AM/FM/CD/ XM, OnStar, remote start. Tag #13T09A........................$23,995

2005 Chevrolet 2500 4x4, extended cab, short wheelbase, 6.6L Duramax, Allison transmission, air conditioning, tilt, cruise, XM radio, OnStar. Tag #12T79C....... ......................................$21,495

2009 Chevrolet Traverse 2LT AWD, heated leather, dual sunroof, AM/ FM/CD/XM/DVD, OnStar, rear camera. Tag #12U15A...$23,995

2007 Chevrolet Tahoe LT 4x4, leather, power locks, power windows, AM/FM/6CD, OnStar, 2007 Chevrolet TrailBlazer 4x4, remote start. Tag #12U17A......... 4.2L, automatic, power locks, 2006 Jeep Liberty Limited 3.7L, ......................................$26,495 power windows, sunroof, XM automatic, heated leather radio, OnStar. Tag #12T100A..... seats, sunroof, Nerf bars. Tag ......................................$14,995 #11C12A.......................$13,995

2003 Dodge Grand Caravan AWD, 3.8L, automatic, heated leather, quad seats, sunroof, DVD. Tag #12T87A...........................$7995

2012 Chevrolet Impala LT, heated seats, power locks, power windows, AM/FM/CD/XM, OnStar, Bluetooth, remote start. Tag #12U31..........................$18,495

COME IN AND TAKE ONE FOR A TEST DRIVE TODAY!!

2002 Chevrolet Tahoe 4x4, 5.3L, automatic, heated leather seats, keyless entry, 3rd seat, OnStar. Tag #12T71A.................$10,995

2011 Chrysler 200 LX, 2.4L, automatic, air conditioning, tilt, cruise, power locks, power windows. Only 11,000 miles. Tag #12U22B.......................$17,995

2008 Pontiac Grand Prix 3.8L, automatic, air conditioning, tilt, cruise, heated leather, sunroof. Tag #12B12A.................$13,495

2012 Chevrolet Malibu 2LT, heated seats, power locks, power windows, AM/FM/CD/XM, OnStar, Bluetooth, remote start. Tag #12U32..........................$18,995

2011 Cadillac DTS Luxury Package, heated/cooled seats, sunroof, AM/FM/6CD/XM, OnStar, Bluetooth, remote start. Tag #12U36..........................$37,995

By NDSU Extension Service Drought conditions stressed this year’s corn crop, leading to weak stalks and shanks. Weak stalks contribute to “downed” corn due to wind or other forces, and weak shanks contribute to ear drop and large field losses. “Farmers need to check the condition of the corn in the field,” says North Dakota State University (NDSU) Extension Service agricultural engineer Ken Hellevang. Drought conditions also are leading to larger than normal in-field corn moisture content variations. Reports indicate the moisture content varies from 15 to 25 percent in the same field due to soil variations or other contributing factors. If kernel size or density varies along with the moisture content, the result could be pockets of wet corn in a bin. That occurs when grain segregates based on size and density as it flows into a bin. “Generally, the smaller and denser material will accumulate in the center and the larger material flows to the perimeter of the bin,” Hellevang says. “Using a distributor or ‘coring’ the bin may reduce the accumulation of smaller material in the center of the bin.” A September harvest also may cause in-bin drying problems. A natural-air drying system that provides an airflow rate of 1 cfm/bu (cubic feet per minute of airflow per bushel of corn) will dry 20 percent moisture corn to about 14 percent with average October ambient air conditions of 50 degrees and 65 percent relative humidity. The estimated drying time is about 37 days, and the allowable storage time (AST) of 20 percent moisture corn at 50 degrees is about 65 days. Average ambient air conditions for September are 60 degrees and 65 percent relative humidity. An air drying system in September will dry 20 percent moisture corn to about 13 percent in about 37 days. The drying time is the same because the corn is dried to 13 percent in September and 14 percent in October, so more moisture is being removed during September. The concern with drying in September is that the AST is reduced to about 28 days. The drying time exceeds the AST, so a quality loss may occur before the corn gets dry and the entire storage life of the corn has been used. Thus, problems also may develop during storage. The drying speed is related to the airflow rate, so the drying speed can be increased by not filling the bin with corn. For example, if the bin is only one-half full, the expected airflow rate will be about 2 cfm/bu and the drying rate twice what it is with an airflow rate of 1 cfm/bu. Running the fan only at night to dry with cooler air will lengthen the AST, but it also will lengthen the drying time. For example, running the fan for 12 hours at night during September will reduce the average air temperature to about 50 degrees, so the AST is extended to about 50 days. However, the drying time also will be extended to about 75 days due to the fan only operating for one-half of the day. “The storage life of corn produced this year may be shorter than normal, so farmers need to be more diligent with drying and storage management,” Hellevang says. “This is because the storage life of grain grown under stressful conditions is normally shorter than that of grain developed without plant stress.” For more information, visit NDSU’s grain drying and storage website at http://www.ag.ndsu.edu/graindrying.

Canada cherry tree

2004 Chevrolet Monte Carlo SuperCharged SS, Dale Earnhardt Jr Series, 3.8L, heated leather, sunroof, XM radio, OnStar. Tag #12T137B......................$11,495

After hours phone numbers:

Dave Bell 873-5478; Dick Ebert: 873-5738; Doug Embody 873-5301

BELL BELL MOTOR MOTOR CO. CO. 1-800-823-2355 (BELL) — 406-873-5515 CUT BANK www.bellmotorco.com

Corn harvest, drying challenging again this year

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a Canada cherry that has black knot. What is the best way to control it? A: Cut it down and dispose of it. I know that is not the answer you were anticipating, but that is the usual conclusion of repeated attempts to control the spread of this plague on Canada cherry trees. If you want to hope that your tree is an exception to the rule, here’s what you can try. Carefully cut the infected branch off back to a lateral branch and destroy it. Begin a spraying program using lime sulfur while the tree is dormant. During the growing season, spray the tree with a Bordeaux mixture or Captan. By being extremely vigilant in your pursuit of controlling this disease, you may be able to rank yourself in the column of exceptional individuals who gained control over black knot without destroying their tree. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Trader’s Dispatch, October 2012 – Page A55

Call Us Toll Free 1-800-247-1220

www.newhollandofbelgrade.com

USED ROUND BALERS

USED TRACTORS

2009 New Holland BR7090, net/twine, Xtra Sweep, Bale Command, 1000 PTO, 4800 bales..............................................$31,100 2008 New Holland BR7090, net/twine, Xtra Sweep, Bale Command, lace belts, 1000 PTO, 3500 bales............................$31,800 2006 New Holland BR780A, twine, Super Sweep, Bale Command, 2358 bales........... . .....................................................$24,800 2005 New Holland BR780A, twine, Super Sweep, Bale Command, 13,348 bales........ . .....................................................$21,500

2004 New Holland BR780, net/twine, Xtra Sweep, Bale Command.................$19,300 2004 New Holland BR780, twine, Super Sweep, Bale Command, hydraulic pickup...$17,500 New Holland BR780, twine.................$14,800 2002 New Holland 688, twine, Bale Command, hydraulic pickup.............................$14,800 2001 New Holland 688, net/twine, Bale Command, hydraulic pickup...................$18,200 2000 New Holland 688, twine, Bale Command, hydraulic pickup.............................$14,100 1997 New Holland 664, net/twine, Bale Command, hydraulic pickup..................$12,100 1995 New Holland 660, net/twine, Bale Command..............................................$12,100 1994 New Holland 660, twine, Bale Command.................................................$9500 1992 New Holland 660, net/twine, Bale Command, 1000 PTO...............................$7500 New Holland 853, twine. Excellent, must see!.. . ........................................................$4800 1997 John Deere 566, twine wrap. Excellent.... . .....................................................$15,700 2001 Vermeer 605XL, twine.................$14,100

2002 New Holland TV140 bidirectional, loader, grapple. 50 hours on new engine warranty, nice................................................$74,500 1991 Ford New Holland 9030, engine end drawbar, cab end 3-pt., PTO, hydraulics, 8500 hours.....................................$29,900 1998 New Holland 8560 MFD, 130 PTO hp, cab, air, loader, grapple, 7940 hours......$49,100

1997 New Holland 8360 MFD, 115 PTO hp, cab, air, loader, 4500 hours...................$51,500 2002 New Holland TM125 MFD, 100 PTO hp, cab, air, loader, 3025 hours............$48,400

Check Out The NEW New Holland BR7090 Baler

USED SQUARE BALER

John Deere 467 16x18...........................$2700

USED SELF-PROPELLED SWATHERS & HEADERS

The New Holland BR 7090 Round Baler’s redesigned bale chamber and forming rolls, in combination with the belts and the sealed adjustable hydraulic bale density system, start a core in any crop and build tight perfectly shaped bales. The integral formed ribs of the new rolls provide aggressive crop movement while eliminating surface imperfections on the ribs, which can be detrimental during the wrapping cycle. The new bale chamber design enables the operator to start cores and make bales in crops and conditions that previously would have been too difficult to bale.

USED PULL-TYPE SWATHERS

New Holland 1431 pivot tongue, 13-ft. cut disc mower............................................$12,200 2006 New Holland 499 12-ft. pivot tongue. Excellent condition.........................$17,700 Hesston 1014 14-ft. pivot tongue, 14-ft. sickle head..................................................$6400

NEW New Holland H8060 Discbine Self-Propelled Windrower 8040’s Holland H NEW New In Stock Also r headers with auge

USED HAY TOOLS

New Holland FP230 pull-type chopper, 27P hay head...............................................$10,500 New Holland 1032 pull-type stack wagon. Excellent....................................................$6800 New Holland 1012 pull-type stack wagon......... . ........................................................$3700 Holsher Model 180 bale pack, handles 18 14x18 bales.......................................$4500 New Holland 258 9’6” rake, left side hydraulic drive, rubber tines. Like new..............$6200 John Deere 54 side delivery rake, 9-ft. working width..................................................$4400 Sitrex 3-point belt rake............................$1840

2008 New Holland T2320 FWA, hydro, 250TL loader, canopy, 250 hours..............$24,800 2005 New Holland TC35 FWA, hydro, 16LA loader, 215 hours. Nice!.................$17,800 Ford 8000, cab, air, 3-pt., PTO, loader, bucket... . ........................................................$8300 Ford 8N, 6-ft. rear blade. Good running tractor.. . ........................................................$2900 1995 Agco 9655 MFD, cab, air, powershift, 984SL loader, duals.......................$46,500 2007 Kubota M5040 MFD, 50 hp, cab, PTO, 3-pt., loader, 500 hours..................$29,600 2005 John Deere 5205 MFD, ROPS, 3-pt., PTO................................................$17,300

SKIDSTEERS & CONSTRUCTION

1995 New Holland 2550, 14-ft. auger header, 2200 hours.....................................$28,500 New Holland 1495, gas, hydrostatic, 12-ft. header...............................................$8500

2003 John Deere 4995, 14-ft. disc header, steel conditioner, 1400 hours..................$64,200 1997 Case IH 8850, disc header, cab..$32,500 Hesston 6650, cab, air, 14-ft. header...$15,500 MacDon 940 15-ft. multi-crop header......$7700

5900 Jackrabbit Lane, Belgrade, MT (406) 388-8500

HIGH SPEED AND HIGH CAPACITY

New Holland H8000 Series Speedrower® windrowers deliver capacity that can’t be matched by other machines. They handle all crops - alfalfa, grass, small grains, canola, barley, lentils or peas - with ease and speed, with models that range from 126 horsepower to an industry-leading 226 horsepower. The control achieved with the H8000 windrowers takes productivity to the highest level.

New Holland Harley MX8 landscaping power box rake............................................$6800 Post Vibe vibratory post pounder, rock spike, pipe driver, 3 way hydraulic, high flow......... . .....................................................$11,300 Mustang MBH9H 9-ft. backhoe for skidsteer, 24” bucket..........................................$7600 2011 Buhler SB5200 skidsteer snowblower. Excellent...........................................$4800 Horsh 7-ft. snow blade, hydraulic angle, skidsteer loader quick attach. Like new...$3100

USED TILLAGE & MISC.

Koyker 150 loader and mounts, bucket..$3500 Farm King 100” 3-pt. rigid drag harrow. Like new!....................................................$975 New Holland EZ84 84” rear blade. Like new..... . ..........................................................$825 1981 International truck, Detroit 653, FS1 525 horizontal TMR...............................$33,300 Kirschmann 12-ft. hoe drill.....................$2500 Erskine 960FM 96” front mount snowblower, drive lines..........................................$5800 Polaris PVT 6x6, dump bed. Excellent condition....................................................$5600 Farm King Y810E 8x12 unloading auger, electric motor...........................................$1500 16-ft. tandem bumper pull trailer..............$1500 Beltec heavy duty post hole auger..........$2800 Danuser 3-pt. post hole auger with 12” auger... . ........................................................$1250 Land Pride PD15 PTO post hole auger with 12” bit......................................................$1240 Shaver post pounders. In Stock........ Save $$$

LAWN & GARDEN

New Holland G4020 zero turn mower, 50”deck, bagger system..................................$3200 John Deere LA175 mower, 54” deck, 26 hp Briggs, hydro, 34 hours.....................$2300 Walker mowers in stock along with Toro commercial and residential units.

Trader’s Dispatch, October 2012 — Page A56

October is “Move ‘em Out” Month - Limited to stock on hand

1995 Sooner all aluminum 3 horse gooseneck with dressing room, tack room, boot box, water tank, rear tack and hay feeders........................................... $9999

$200 Fuel Card With Purchase

LIKE NEW 2011 Royal T 4 horse aluminum gooseneck, 7-ft. tall, 83” wide, all aluminum frame and skin, torsion axles, LED lights, auto-lock bar handles on double rear doors, sealed, insulated, carpeted walls in large dressing room & mid-tack room, swing-out saddle rack, blanket bar, LOADED with many other features. Perfect for the weekend getaway. Retail $26,000...Was $22,000...Now $18,500

New Featherlite 24-ft. aluminum gooseneck stock trailer with 2 sliders. Retail $24,330.................. $18,800

$200 Fuel Card With Purchase New PJ 30-ft. gooseneck with triple 7000# axles and brakes, 5-ft. dovetail with 3 flip over ramps. Hauls 8-ton. List $9699. Regular $8899 New Featherlite 8127 20-ft. aluminum gooseneck Sale Priced...................................................... $8500 stock trailer with one center slider. Retail $22,374......... New PJ 28-ft. gooseneck with triple 7000# axles and ......................................................................... $17,300 brakes, 2 flip over ramps, popup dovetail. ........................................................................ $8500

New Circle D 6-ft. 8” x 20-ft. gooseneck stock trailer with (2) 7000# axles, bull package, center slider, mats, spare tire. White. Retail $10,652.......................... $9281 24-ft. also in stock................................. Call for pricing

New PJ 20-ft. skid steer tilt deck with (2) 7000# axles with brakes, 16-ft. tilt plus 4-ft. stationary deck. List $6199. Regular $5699 Sale Priced...................................................... $5499

New PJ 8” channel FULL POWER tilt, 22-ft. deck, 102” wide, (2) 7000# axles with brakes, tool box, traction bars on tail, D-rings. List $7699 Sale Priced...................................................... $6999

New PJ 14-ft. gooseneck dump with fold-down sides, (2) 7000# axles with brakes, scissor hoist, spare tire and carrier. Hauls 11,000#. List $9299. Sale Price with FREE roll tarp......................... $8099

New PJ 83” x 14-ft. bumper pull dump trailer with tarp kit, split spreader gate. Retail $8028................... $7209

New PJ 26-ft. tandem dually with flip-over ramps, spare, tool box. Retail $11,224......................... $10,259

October seminars to help cattle producers cut costs

By University of Idaho Extension A series of four University of Idaho Extension seminars in October will offer tips for cattle producers who are facing higher feed costs and losses of winter range to fire and drought across southern Idaho. “One of the things that’s really concerning producers is the lack of winter range,” said John B. Hall, superintendent of the Nancy M. Cummings Research, Extension and Education Center near Salmon. University of Idaho Extension will conduct Beef Cow Winter Feeding Strategies Seminars in four locations: Salmon, October 23; Pocatello, October 24; Burley, October 29; and Caldwell, October 30. Each seminar will feature expert beef nutritionists from the Northwest. The College of Agricultural and Life Sciences’ new beef nutritionist, Mary Drewnoski, will speak at each location. Tim DelCurto of Oregon State University will be the keynote speaker at Burley and Caldwell. Steve Paisley from University of Wyoming will present the keynote talk at Salmon and Pocatello. Breakout sessions are customized for each location by extension educators and producers. These breakout sessions may include information on using crop residues, alternative feeds and nutrition for improved reproduction. “The dry weather has hurt range productivity this year. So in areas where cattle producers use winter range, it will be lacking. Producers are concerned about how they’re going to get through the winter with limited feed supplies,” Hall said. The workshop speakers will focus on helping producers develop ways to use feed more efficiently and economically, said Benton Glaze, Twin Falls-based University of Idaho Extension beef specialist. “Winter feed costs represent a major share of their expenses. In drought years or when range is lost to fire, it is valuable for them to have strategies to efficiently feed their cattle,” Glaze said. “That’s true even in normal years. “Some of the things we normally use as alternative feeds are extremely high priced or limited in availability because they’re being used as substitutes for corn,” Hall said. “Wheat midds, distiller’s grains and corn gluten feed are all things we traditionally can use as supplements with lower quality hays or even straws and do pretty well with feeding that dry, pregnant cow.” Both Glaze and Hall said cattle producers will learn how to better match their feed rations to their cattle’s actual needs. “I hope they can walk away knowing how to get their feed analyzed and how to balance the diet for the needs of the cows. Or learn how they can seek the help of extension educators for help in balancing their cows’ diets,” Hall said. Heifers carrying their first calf or a cow carrying her second have different nutritional needs than a mature cow because the younger animals are still growing themselves, in addition to supporting a calf, Glaze said More information about the Beef Cow Winter Feeding Strategies seminars is available from local University of Idaho Extension educators or Kara Kraich, University of Idaho Extension beef quality assurance coordinator, at kkraich@uidaho.edu or (208) 454-7655.

Bare arborvitaes

New PJ 28-ft. tandem axle gooseneck with 5-ft. popup dove and flip over ramps. Retail $8401................ $7643

New PJ 24-ft. gooseneck car hauler with (2) #7000 axles, straight deck with 5-ft. slide-in ramps. Retail $5999. ............................................................................ $5315

Used 2008 Newmans sledbed, 16-ft. with spare...$3500 PJ 30-ft. pintle hook flatbed with (2) 10,000# axles with brakes, oil bath hubs, 5-ft. dovetail, 2 flipover ramps, popup center, spare tire. Very nice low mileage trailer. Remaining warranty. Sold new for $9400. Buy this one for................................................ $7700

2245 Amsterdam Road Belgrade, Montana 406-388-7479 Call us for delivery options

“We Work Harder To Stretch Your Dollar Farther”

By Ron Smith, Horticulturist, NDSU Extension Service Q: My arborvitaes became bare in the middle this winter. I read that deer feeding on the branches could be my problem. The arborvitaes were completely normal last fall. (New Jersey) A: White-tailed deer are famous for doing just that to arborvitaes. They were almost extinct in New Jersey years ago, but conservation has returned them to full force. This has driven the deer to leave forest-edge environments and wander into residential sites where they find an abundance of very edible shrubs and trees to nibble on. My folks lived in eastern Pennsylvania by the New Jersey border. You’d think the neighbors were raising the deer as pets because they were so bold and friendly. Unfortunately, once they’ve cleared out that part of the tree, it will not regreen to any extent, so the deer have ruined the plantings. In the future, use Liquid Fence or Plantskydd to keep them from getting started on your plantings. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Trader’s Dispatch, October 2012 — Page A57

SWING AWAY AUGERS IN STOCK!

12”x72-ft. and 8”x46-ft. IN STOCK! Motor Company 1-888-420-3399 Havre, MT 406-265-7865

TILLEMAN

Paralink Hoe Drill

We’ve Got Your Field Covered

No two farming operations are the same. The Bourgault 3320 PHD™ is available in three different configurations to make sure you have the best options available. The 3320 Paralink Hoe Drill provides you with the benefits of seed opener choice, a wide selection of packer wheels, and the option to place nitrogen fertilizer in the optimal position in a one-pass operation with the Mid-Row Banders III®.

UNITS IN STOCK

Need Parts for: MacDon, Case IH, New Holland, Premier or Westward headers? Call Us!

(2) 2012 Bourgault L6550 air seeders, 4 tank metering, 10” deluxe auger. 2012 Bourgault 3320 QDA 76-ft. Paralink independent air hoe drill, 10” spacing, 3/4” points, semi-pneumatic packers. 2012 Bourgault 3320 66-ft. Paralink independent air hoe drill, 10” spacing, 3 /4” points, semi-pneumatic packers. 2011 Bourgault L6450 450 bushel D air seeder tank, 4 ranks, 3 meters, leading series, 900x32Stires. OL 2010 Bourgault 3310-55 55-ft. Paralink drill with mid row banders, double D shoot, single run blockage, OL 10” spacing, 3/4” knives. Approximately S 5000 demo acres. New with Full Warranty.

USED WINDROWERS & HEADERS

2009 Case IH WD1203 LDwith 2005 Case IH HDX162 hay header, 190 hours. SO 2009 MacDon M200 self propelled with 2009 MacDon R80 rotary head, 500 hours. 2008 MacDon M200 with 1700 hours. Your choice of draper or disc header. 2001 Premier 2940 with 14-ft. MacDon 922 headLDcondition. er, 1380 hours, good O S

Call Us Today...Our Inventory Changes Daily

TILLEMAN Motor Company

1-888-420-3399

USED COMBINES & HEADERS Gleaner R62

Havre, MT

406-265-7865

USED TRACTORS

2009 Valtra A92 FWA, loader, grapple, 80 hours. 1993 Ford 8670 with loader and grapple.

ALL NEW Vermeer BPX9000 Bale Processor

Give us a call...Several trades coming in

TILLEMAN Motor Company

1-888-420-3399

Havre, MT

406-265-7865

5400 Series Tractors When quality really counts

Farming is not just a job. This is not just a tractor. 75 - 115 hp 5400 Series mid-range tractors were overbuilt on purpose to be the most rugged and reliable tractors on the market today, and for years to come. • So comfortable that when the day is done, you aren’t. • Reach key engine points in seconds. • 16-speed transmission translates into getting the job done faster.

8600 Series Tractors Now with even cleaner emissions

TRI-VALUE LEASE AVAILABLE 0% for 36 months lease on new MF 8660 & MF8690

Ask about optional lower one year payment and added incentives for the customer to convert to a retail contract within one year.

Massey Ferguson’s biggest, most powerful tractor range ever features second generation SCR technology, providing you with superb fuel economy and even cleaner emissions. A machine with exceptional capabilities, the seriously modern 8600 series combines a six-cylinder Agco Sisu Power engine and Dyna-VT transmission with dynamic looks and an immense structure, to guarantee the highest productivity and optimum performance. Massey Ferguson is anticipating the future demands of today’s farming community. In order to meet those needs, the MF 8600 has been meticulously developed so you can look to the future with confidence.

NEW 8670 IN STOCK NOW

TILLEMAN 1-888-420-3399

Motor Company Havre, MT 406-265-7865

The all-new BPX9000 Bale Processor from Vermeer combines simplicity, durability and versatility to meet the needs of today’s cattle producers. The easy to operate machine is built tough with a unique, T-style frame, the bed design and offset rotor produce even and consistent feed with minimal maintenance, and an optional large square bale kit includes enhancements to effectively process a variety of bales. The BPX9000 is built to maximize bale processing and minimize operator stress. The BPX9000’s slat and chain bed and positive bale feeding improve bale rotation, feeding bales more consistently into the rotor, while reducing the need for operators to reverse rotation of the bale when feeding. The split shaft in the bed allows for easier maintenance without removing the entire bed, and long-lasting bushings in the bed are resistant to net and twine wrapping. In addition, the bale processor’s offset rotor feeds material with less slugging, for a consistent cut length and higher quality feed. With exclusive cut control bars in combination with the self-cleaning rotor, excessive build-up of net and twine on the drum is eliminated. The rotor can also be manually cleaned, with easy access through a side-access door. The BPX9000 has no welds or gussets at high stress points for enhanced durability. The optional large square bale kit gives producers the flexibility to process both round and square bales, with offset loader forks to position square bales to the right side of the processor and a sidewall that lowers to effectively process square bales.

TILLEMAN Motor Company

1-888-420-3399

Havre, MT

406-265-7865

2011 and 2012 Gleaner S77s COMING OFF LEASE - EXCEPTIONAL VALUES

TILLEMAN Motor Company 1-888-420-3399

Havre, MT

406-265-7865

Trader’s Dispatch, October 2012 — Page A58

The deadline for phoning in advertising for the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291.

Modular Homes by Forest River Housing

Let Us Put You In A New Home Today!!

Turn key - we can do it all!

Many floor plans to choose from Call or e-mail today for more information

3820 6th Ave W., Williston, North Dakota 701-774-5310, 406-396-4090 or 406-471-4049 pkylecampbell@hotmail.com

FALL

Grains & Grasses

USDA establishes national watershed research network

By Sandy Miller Hays, Agricultural Research Service The U.S. Department of Agriculture’s (USDA) Agricultural Research Service (ARS) announced that it has established a Long Term Agro-ecosystem Research (LTAR) network from among its existing experimental watersheds and rangelands nationwide to address large-scale, multi-year research, environmental management testing and technology transfer related to the nation’s agricultural ecosystems. ARS is USDA’s chief intramural scientific research agency. “This national network of agro-ecosystem research will aid our understanding and forecasting of the nation’s capacity to provide agricultural and other ecosystem-related goods and services under changing environmental conditions, in addition to society’s changing demands on natural resources,” said USDA Deputy Undersecretary for Research, Education, and Economics Ann Bartuska. ARS maintains approximately 22 watersheds and experimental range research sites nationwide, with sites in 15 states. Some of the ARS experimental watershed research sites date to 1912, while others were established as recently as 2007. The initial LTAR network will include 10 of these sites, with more sites to be added later. The 10 sites chosen are affiliated with ARS research units located at Ames, Iowa; Cheyenne, Wyoming; Columbia, Missouri; El Reno, Oklahoma; Las Cruces, New Mexico; Mandan, North Dakota; Pullman, Washington; Tifton, Georgia; Tucson, Arizona; and University Park, Pennsylvania. ARS will be seeking partnerships in network research, as well as in development or selection of additional sites, with universities, other federal agencies and other interested parties. “This network will further strengthen ARS’ established, significant investment in long-term research to enhance agricultural sustainability, including our Benchmark Experimental Research Watershed and Experimental Range sites located in the nation’s 10 major agro-ecosystems,” said ARS Administrator Edward B. Knipling. “ARS’ long-term research sites, projects and databases represent invaluable platforms on which to test our understanding and ability to manage emerging issues in agricultural sustainability.” The LTAR network will interact and collaborate with other national ecological research networks, such as the National Science Foundation’s already operational Long Term Ecological Research (LTER) network with 26 sites nationwide, the National Ecological Observatory Network (NEON) now being developed by the National Science Foundation and NEON, Inc, and the USDA Forest Service network of Experimental Forests and Ranges. The LTAR network can provide data that can be used in the development of innovative management systems that increase the resilience of agricultural ecosystems in the face of rapid environmental and socioeconomic change, and can help assess the environmental and societal impacts of different agricultural practices and land uses within a particular landscape. Information from LTAR also can contribute to the development of agricultural production systems that maximize energy conservation and reduce greenhouse gases, while investigating various forms of incentives to encourage onfarm adoption and mitigation, and optimize biodiversity to conserve and protect natural resources while enhancing agricultural profitability. The national approach to be utilized in LTAR will allow scientists to investigate important research questions against a wide range of environmental conditions, include episodic events such as pest and pathogen outbreaks, detect important but slow-acting phenomena such as changes in soil carbon, climate, and land use, and calibrate and validate the models used to forecast such changes. As a whole, the network will seek to address complex scientific questions about long-term processes on a regional or national scale that cannot be addressed by individual locations.

Christmas cactus pollen

MONTANA SEED, GRAIN & CHEMICAL

1400 Minnesota Ave • Billings, MT • 252-8012 mtseed@montana.net 1-888-252-8012 montanaseed.com

By Ron Smith, Horticulturist, NDSU Extension Service Q: Does a blooming Christmas cactus give off pollen, and are you aware of anyone who is allergic to the plant? A: In nature, pollination of the cactus is carried on by birds. No one should have an allergy to the pollen. I’ve never seen it on any lists or heard of anyone having an allergic reaction to cactus pollen. If the pollination of this cactus was dependent on wind movement, then the chance of an allergy would be elevated.

By Suzanne Geppert, SDSU Extension 4-H Youth Field Specialist As the 4-H year draws to an end, it is time to start contemplating plans for the upcoming year. School is in session, fall sports have begun and the sudden question of “Where do we go from here?” begins. The answer to the question is simple. It is goal development time. What is it that you want to achieve in the upcoming 4-H year? And most importantly, how are you going to make it happen? Goal development can be summed up in one simple word “S.M.A.R.T”. As you set down to plan and develop goals for your upcoming 4-H year make sure they are: • S- Specific. Make sure the goal states specifically what it is that you want to achieve. • M- Measurable. Can the goal’s success be measured? • A- Attainable. Is it attainable? • R- Realistic. Is the goal possible? Can it be reached? • T- Time Bound. Does your goal have a time table? These are all important elements to consider when setting goals for your future programs and projects. We all want success for our 4-Her’s and communities so let’s plan ahead and make sure our goals are S.M.A.R.T. To assist with your planning, you can download the 4-H S.M.A.R.T. Goal Setting Template (http://igrow.org/up/ resources/01-1005-2012.pdf). Further information on goal setting can be also found from your local 4-H Youth Program Advisor, 4-H Field Specialists, or the State 4-H office. You can also visit the Official 4-H Website (http://www.4-h.org). Part two of this series will cover the importance of writing an action plan.

Tarzan Tree Trimming, LLP Our skidsteers can: 4 Grind stumps 4 Dig up stumps or trees 4 Cut off trees or brush 4 Move debris 4 Clear fence lines or ditches We also have: 4 Bucket truck 4 Chipper 4 Dump trailer 4 Small portable stump grinder 4 Chainsaws large and small 4 A can-do attitude and honest .. work ethic l (

4-H project planning: Part I

Trader’s Dispatch, October 2012 — Page A59

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

For a FREE estimate on your project Call Matt Sims at home (406) 654-2706 or cell 399-0913 Call your local FSA or NRCS office for cost share information through the WHIP, CSP or EQUIP programs.

UP TO 3 YEARS INTEREST FREE On Used Equipment - oac -

SPRAYERS

2010 John Deere 4930 self-propelled, 480/80R50 tires, high flow solution pump, SS eductor delivery system, 120-ft. booms, 20” spacing, BoomTrac auto level system, 50 gallon foam marker, wheel slip control, deluxe cab, AutoTrac Ready, HID field light, fence row nozzles, radar, row crop fenders, start aid, block heater. #16014086. (1).............................................CALL

2009 John Deere 4930 self-propelled with 480/80R50 tires, high flow pump, SS eductor system, 120-ft. booms, 20” spacing, BoomTrac auto level, foam marker, wheel slip control, auto air level, Zenon HID lights, AM/FM/CD/ WB, fence row nozzles, wheel motor shields, fenders, engine start aid, block heater, 5-body nozzles. #16014092. (3)........................................ $265,000

2008 Apache AS1210 100-ft., variable rate nozzles on three way bodies, Viper Pro, Ravens best system, auto control, auto boom height, AutoSteer, end jets, 1200 gallon poly tank, 275 hp. #16014097. (1).............. $168,000

Check Out Our WEBSITE: www.fesmt.com

1998 Summers 90-ft. wheel sprayer, 1500 gallon, 140 gallon rinse tank, shields, 440 Raven. #16014099. (1)...... $7000

FEEDING EQUIPMENT

2012 Highline CFR650 bale processor, 3 hydraulics, 1000 PTO, 1 3/ 8 ” 21 spline, 16.5Lx16.1 tires. #14200778. (1).CALL 2012 Highline CFR650 bale processor, 3 hydraulics, feed chopper, grain tank. #14200816. (3)..........................CALL

2005 Brandt QF2500 130-ft. wheel boom, 1500 gallon tank, windcones, mix tank. #16014098............................... $8500 2006 New Holland SF115 133-ft. trailer type sprayer, 1500 gallon tank, windscreens, chemical inductor, 18.4x38 singles, double nozzle bodies-ER80-02 & ER80-04 combo jets, electric end jets, hydraulic drive, Handler I, 15 gallon chemical tank. #16014023............................ $26,750

FERTILIZER SPREADER

1996 Summers DT 100-ft. wheel boom sprayer, 2000 gallon tank, windscreens, double boom. #16014091. (1)............................................ $6000

Flexi-Coil S65XLT pull type, 114-ft., twin boom system, 1000 gallon and 500 gallon tanks, chemical load system, windscreens, rinse tank. #16014048. (3)......................................... $12,500

2012 Highline CFR650 bale processor, 3 hydraulics, feed chopper. #14200817. (2)..............................................CALL 2012 Highline CFR650 bale processor, 3 hydraulics, 1000 PTO, 13/8” 21 spline, 16.5Lx16.1 tires. #14200779. (1).CALL

2011 New Leader L3030G4 high capacity, 300 cu. ft., holds up to 10 tons, spread material from 50 lbs. to 1100 lbs. per acre, Accurate spread pattern up to 105-ft. #14200722. (1)...................................................................RENTAL RETURN SAVE THOUSANDS

New Degelman 3100 right hand discharge Bale King, 1000 PTO, 31x13.50-15 tires. #14200536.......................CALL

2009 Roto-King MD2820 round bale feeder, fits JD 600 or 700 series loaders, hydraulic drive. #13012157 (1).... . ................................................CALL

406-228-2496 or 800-428-2496 Glasgow, MT (1) 406-765-1531 or 800-443-9447 Plentywood, MT (2) 406-485-2145 or 800-521-5800 Circle, MT (4) 406-787-6201 Culbertson, MT (3) Check out our website: www.fesmt.com

After Hours Sales: 2002 Hardi CT1200 Commander twin force suspended boom, 90-ft., triple nozzle, adjustable boom angle and windspeed from in cab, 1200 gallons, 110 gallon rinse tank, chemical inductor, 1000 PTO driven pump, 320/90 R46 tires. #16014090. (2)..... $16,000

John Deere

Glasgow: Mike Johnson, Salesman 406-263-2501; Rob Campbell, Salesman 406-942-0543; Wade Engstrom AMS/Commercial Sprayer Specialist 406-263-2498; Coel Stutheit 406-263-2494 Plentywood: DJ. Dixon, Salesman 406-480-3512 Circle: Mike Haynie, Store Manager/Salesman, 406-263-2496; Ole Rolandson, Salesman, 406-974-2144; Culbertson: Mike Kjos, 406-489-7277; Luke Anderson, Salesman 406-790-0722

Trader’s Dispatch, October 2012 – Page A60

Ask Us About Our Used Combine Rent To Own Plan FLEX HEADERS

COMBINES

2011 John Deere “4WD” 9770STS 360 hp, 9.0L engine, 3-speed transmission, Firestone 20.8x42 dual drive tires, 28L-26 steering tires, Command Touch operator control console, Touchset automatic combine adjust, Premium header control package, Contour Master feederhouse with reverser, bullet rotor, 2-stage Dyno-Flo II cleaning system, extended wear small wire & round bar concaves, extended wear grain handling system with high capacity 22.5-ft. unload system, wide spread straw chopper, 635D 35-ft. draper header. 0% Finance Available - oac. #16001313................................CALL

2011 John Deere “4WD” 9770STS 360 hp, 3-speed hydro transmission, Firestone 20.8x42 drive tires, 28L-26 steering tires, Command Touch operator control console, Touchset automatic combine adjust, Premium header control package, Contour Master feederhouse with reverser, bullet rotor, 2-stage Dyna-Flo II cleaning system, extended wear small wire & roundbar concaves, extended wear grain handling system with high capacity 22.5-ft. unload system, straw chopper, 635D 35-ft. draper header, Mauer grain tank extension, 935 hours. 0% Finance Available - oac. #16001308.....CALL 2010 John Deere 9770STS Premier cab, field vision HID lights, Contour Master feeder house with reverser & high torque variable speed drive, 3.15” lift cylinders, extended wear threshing elements, separator tines & rotor top cover, extended wear stainless steel clean grain elevator, tank charge housing & grain tank loading auger housing, heavy duty grain tank cross augers, Mauer grain tank extension, 2 speed chopper, 800/70R38, 8L-26 rear tires, adjustable rear axle. 0% Finance Available - oac. #16001333.....CALL 2010 John Deere 9770STS Premier cab, field vision HID lights, Contour Master feeder house with reverser & high torque variable speed drive, 3.15” lift cylinders, extended wear threshing elements, separator tines & rotor top cover, extended wear stainless steel clean grain elevator, tank charge housing & grain tank loading auger housing, heavy duty grain tank cross augers, Mauer grain tank extension, 2 speed chopper, 800/700R38, 28L-26 rear tires, adjustable rear axle. 0% Finance Available - oac. #16001332.....CALL

RIGID HEADERS

2000 John Deere 930R header. #16002258. (4)...........................$9500

draper headerS

2011 John Deere 640D 40-ft., pickup reel, full length skid shoes, cross auger, transportation lights. #16002265.......... ................................................$75,000 2009 John Deere 635D 35-ft. with transportation kit. #16002252.........$55,000 2009 John Deere 635D 35-ft., double sickle, hydrafloat automatic suspension & position control system, gauge wheels, 16” feed drum, 1-piece poly tine pickup reel with 10” center tube, hydraulic fore/aft, dial-a-speed control, 40” wide draper belts, single point hookup, spare sickle & road transport with lights. #16002224.............$50,000 2008 John Deere 635D 35-ft. with transportation kit. #16002259.........$52,000 2005 MacDon 974 60 Series, pickup reel, flex draper. #16002242. (2)........CALL 2003 MacDon 974 header. #16002250..... ................................................$40,000 2003 MacDon 963 36-ft., pickup reel, transportation kit, 60 Series JD adapter. #16002193..............................$30,000

2010 John Deere 9770STS Premier cab, field vision HID lights, Contour Master feeder house with reverser & high torque variable speed drive, 3.15” lift cylinder, extended wear threshing elements, separator tines and rotor top cover, extended wear “stainless steel” clean grain elevator, tank charge housing and grain tank loading auger housing, heavy duty grain cross augers, Mauer grain tank extension, 2 speed chopper, 800/70R38 drive tires, 28L-26 steering tires, hydro transmission, JD 635D 35-ft. draper header, finger reel, transportation kit. 0% Finance Available - oac. #16001229.............CALL 2009 John Deere 9770STS Performance Plus custom package, Premier cab, Contour Master feederhouse with reverser, 3.15” lift cylinders, premium header package, small grain & round bar concaves, separator & grain handling package with high capacity 22.5-ft. unloading auger, 2 speed straw chopper, Firestone 800/65R32 drive tires with 4” axle extension, 600/65R26 steering tires, concave cover plates, additional grain tank sensor. 0% Finance Available - oac. #16001263... . ................................................CALL 2009 John Deere 9770STS 360 hp, hydro, Premier cab package, Contour Master feeder house with reverser, premium header package, 22’x5” high capacity unload auger, widespread straw chopper, Firestone 800/65R32 drive tires with 4” axle extensions, 600/65R28 steering tires, concave cover plates, additional grain tank sensor, 635D35-ft. draper header, pickup reel, transportation kit. “Reconditioned”. 0% Finance Available - oac. #16001262. (3)..............................................CALL 2004 John Deere 9760STS chopper with chaff spreader, small wire concave, TouchSet concave adjust, Harvest monitor, Firestone tires, high density lighting, heavy duty final drive, 110 volt coolant heater, 105mm axle spacers, field office training seat with 936D draper header, pickup reel. 0% Finance Available - oac. #16001343. (4)..............................................CALL 2004 John Deere 9660STS level land feeder house, 3 position height control, Harvest Doc, Touchset adjustment, small wire concave, standard unload auger, spreader, heavy duty final drive & hydrostatic system, 30.5x32 bar lug tires, 18.4-26 bar lug rear tires, training seat, stereo, service lights, Mauer grain tank extension, 16” axle extension, 635F 35-ft. flex header. 0% Finance Available - oac. #16001297. (2)..............................................CALL 1998 John Deere 9610 20-ft. unloading auger, Dial-A-Speed header, right hand lever control, hydraulic fore/aft reel, AM/FM radio, beater grate curtain with JD 930R rigid header. 0% Finance Available - oac. #16001272. (1)..CALL 1994 John Deere 9600 chopper, chaff spreader, 30.5LX32 tires, hydraulic fore/aft reel, Dial-A-Speed header right lever control, field lighting, 20-ft. unloading auger with 936D header. 0% Finance Available - oac. #16001340. (4)..............................................CALL

PICKUP HEADERS

2012 John Deere 14-ft. belt pickup attachment, hydraulic drive. #16002262.$8000 2012 John Deere 14-ft. belt pickup attachment, hydraulic drive. #16002261.$8000 1981 John Deere 212P 12-ft. pickup header with JD attachment. #16002253...... ...................................................$3995 1979 John Deere 212P 14-ft. header with Melroe 351 pickup attachment. #16002240.................................$3500 1976 John Deere 212P 12-ft., no attachment. #16002212. (1).................$2500 John Deere 100 12-ft. with Melroe attachment. #16002209. (3)...................$700

1992 John Deere 9600 grain combine, 12” axle extension, 30.5x32 diamond tread tires, 14.9x24 rear tires, straw chopper with JD 930 platform, pickup reel. 0% Interest Available - oac. #16001295. (3)..............................................CALL 1991 John Deere 9600 combine with chopper, 18.4x38 dual tires, 14.9/24 steering, DAS, Harvest Trak, AM/FM, John Deere 930R platform, pickup reel. 0% Finance Available - oac. #16001277. (4)..........................CALL 1990 John Deere 9600 conventional combine, deluxe cab, air, hydro, 240 bushel grain tank, Dial-A-Matic reel speed & header height, chopper, chaff spreader, new 30.5x32 drive tires 2011, 400 hours on factory rebuilt engine, reconditioned 2012, 5306 engine hours, 3611 separator hours. 0% Finance Available - oac. #16001327................................CALL John Deere 7720 with 224 header. 0% Finance Available - oac. #16001325... . ................................................CALL 2002 Agco Gleaner R62 dual tailings, 4 speed hydro, 2 speed cylinder, 30.5x32 drive tires, 280 hp, Cummins 8.3L, plastic finger reel with MacDon 962 36-ft. header. 0% Finance Available - oac. #16001273. (1)................CALL

2011 John Deere 635F 35-ft., composite auger fingers, finger reel. #16002230. . ................................................$44,500 2006 John Deere 635F flexible draper header. #16002237.................$32,500 2006 John Deere 635F 35-ft., pickup reel, composite fingers, high stone dam. #16002264..............................$25,000 2004 John Deere 635F header, auger composite fingers, HH sensing & contour sensor, spare knife. #16002243. (3)............................................$28,500 2001 John Deere 930F 30-ft. with pickup reel, 2 wheel trailer. #16002249.$14,500 1998 John Deere 930F 30-ft., pickup reel. #16002254..............................$10,000

HEADER TRAILERS

2012 Unverferth AWS42 42-ft. , wheel steer transport, field runner/green, 235/80x16 tires, no brakes. #14200794....... $9500 2012 Unverferth AWS36 36-ft., wheel steer transport, field runner/green, 225/75x15 tires, no brakes. #14200796....... $9000 2012 header trailer. #16009204....... $7000 2011 Unverferth HT42 42-ft. 4-wheel header trailer, 16-ft. tongue, tie down straps, 4-11L-15” tires. #16010016. (1)............................................... $6950

2010 Unverferth HM4201G “Highway Legal”, 42-ft. Road Runner header trailer, brake lights. #14200541..........$12,950

GRAIN CART

2012 Brent 882 800 bushel, 20” corner auger, 120” rigid axle, 27x32WH/30.5x32 R1 14 ply tires, Weather Guard roll tarp, 3.75” hitch, scale. #14200789. (2)........ ................................................$50,000 2011 Unverferth 1194 Avalanche, 1100 bushel, double auger, 22” pivoting unloading auger, 520/85R42 walking beam, tandem duals. #16010022. (4).. ................................................$71,500 2008 Bourgault 1100 21.5Lx16.1 lug tires, 1000 PTO, roll tarp. #16009206........... ................................................$39,500 2006 Ez-Trail 860 860 bushel, PTO, hydraulic drive, tarp, no scale. #16009207..... ................................................$25,000 UFT 750 750 bushel, green, scale. #16009199. (4)........................$21,000

Unverferth 35-ft. Road Runner header trailer. #16009192. (3)................. $9800 2009 V-Tech VSA 36-ft. header trailer. #16010013. (1)........................... $1500

UP TO 3 YEARS

INTEREST FREE

On Used Equipment - oac Swathers

2002 John Deere 4895 windrower, selfpropelled, steel/steel conditioner, cab, air with 16-ft. 895 platform. #16006431. (3).......................................... $48,000 1982 John Deere 2420 swather with 240 14-ft. auger head, 21-ft. 130 draper header, 16.5-16 front tires. #16006343. (4)............................................ $9750 John Deere 2320 swather with 15-ft. draper platform, no cab. #16006417.. . ............................................... $2500 2010 Case IH WD1203 swather with 16-ft. header with steel conditioner. #16006419. (1)...................... $95,500

2002 John Deere 1600A mower conditioner. #16006357. (4)........... $13,800 1996 John Deere 1600A mower conditioner, 110” conditioners, 1000 PTO, rubber conditioner rollers. #16006410. (1)............................................. $9500 1995 John Deere 1600A 16-ft. mower conditioner, new guards 2 years ago, new sickle, rubber conditioner rollers. #16006318. (4)...................... $10,500 1995 John Deere 1600A 16-ft. mower conditioner, 1000 PTO. #16006359. (4).......................................... $10,000 1992 John Deere 1600 mower conditioner, wide roll, 1000 RPM, 16-ft., equal angle hitch & jack. #16006397. (4)............................................. $7500 1992 John Deere 1600 16-ft. mower conditioner, urathane conditioners, 1000 PTO, regular guards, hydraulic pickup lift. #16007362. (1)........ $4500

HAY RAKES

1989 Agco-Hesston 1170 16-ft. mower conditioner, 110” rubber conditioner rolls, double sickle, double auger, 1000 rpm. #16006305. (3)................. $8000

GRAIN VAC

2011 Rem 3700 14-ft. auger discharge height, 7 flexible steel & aluminum pipes, floor sweep, clean-up nozzle, 70 hp minimum, up to 10,000 bushels per hour. #13004020........................CALL

2011 Sitrex MK16 16 wheel V-rake, 30-ft. working width, 14 mph work speed, minimum 40 hp., 8’3” transport hitch. #13012256............................ $19,500

2006 Walinga 6614 high capacity Agri-Vac, 1000 PTO. #16009208...............$9500

2009 Frontier WR1218C 18 wheel, high capacity with center wheel. #13009047............................ $21,500

2012 John Deere 480/80R50 set of 2 radial Goodyear tires & rims, fits 4930 or 4940 commercial sprayer. #16010030............................ $13,000 2012 John Deere 480/80R50 set of 2 tires & wheels, fits 4930 & 4940 commerical sprayer. #16010029............... $13,000 2012 John Deere AR260462 480/80R46 duals off 7200R tractor. #14401614... . ............................................ $10,000 2-520/85R-46 R2 tires, deep tread with 50 hours. #16009096.................... $2800 2-480/75R-34 R2 tires, deep tread, 50 hours. #16009095.................... $2450 John Deere 18.4x46 dual tire and rim set. #16009106. (1)......................... $1350

New Holland 216 hydraulic drive, folding twin rake. #16007358. .......... $13,000

John Deere 524 10-ft. dozer blade, came off JD 4440 tractor. #1601031..$2000 Degelman 10-ft. dozer blade, came off JD 4020. #16009197..................... $1500

miscellaneous

MISCELLANEOUS HARVEST equipMENT

John Deere 36-ft. bat reel, fits 930 series header. #16002013.................. $1500 John Deere straw spreader, came off 9750 combine. #16001054.......$1500 John Deere straw spreader, off 9760STS. #16001055...............................$1500 John Deere straw spreader fits 9600 combine. #16001056.................. $500

After Hours Sales:

John Deere

Trader’s Dispatch, October 2012 – Page A61

air seeders - RENTAL AVAILABLE

1998 John Deere 1820 60-ft. air hoe drill, dual caster, 10” spacing, single shoot, 3x21 steel packers, rock guards, 787 tow between air seeder, remote blockage switch. #16005200. (2)... $45,000

DEAL OF THE MONTH

UP TO 3 YEARS INTEREST FREE On Used Equipment – oac

Tractors - Row crop - COMPACT NO-TILL DISK DRILLS 2011 John Deere 1895 43-ft. no-till disk drill, dual delivery tubes/anhydrous, smooth gauge wheels, cast fertilizer closing wheel, double shoot air package, primary blockage system for seed and fertilizer, main frame dual wheels 31-13.5x15, wing weight bracket, 1910-430 tow behind air seeder, 3-tanks, 6-run double shoot system, 18.4x4R-42 duals, variable seed/fertilizer rate control, 10” loading auger, regular & high rate meter roller. #16005201.......................... $230,000 2006 John Deere 1895 40-ft. no-till disk drill, 10” spacing, dual shoot air package, cast closing wheel, steel gauge wheel, 1910-340 tow behind air seeder. #16005203.......................... $173,000

2004 John Deere 1895 42-ft. no-till disk drill, 10” spacing, dry fertilizer, single placement fertilizer, steel gauge wheel tow-behind 1910-430 air seeder, 12” conveyor, flotation tires, variable seed and fertilizer rate control. #16005167. . .......................................... $146,000 AIR HOE DRILL 2011 John Deere 1835 41-ft. 550#, 3-rank 5.5”x21”semi pneumatic press wheels, electronic depth control, transport lowering stop, rock guards, tow behind, primary blockage, knife body & hardware, 4” tip with roll pin knife, 2011 JD 1910 430 bu, 3 tank, 4-run double shoot, 10” spacing, reg meter roller/front, high meter roller/ rear, 2-710/70R-38 high flotation tires, dual wheel caster beam, field hitch air sdng tool, 10” auger with steel flighting, variable speed. “Only 3100 acres.” #16005181. (4).................... $180,000 2008 John Deere 1835 60-ft., 10” spacing, JD 1” carbide tips, 33x15.5 flotation tires, duals on wings, rock guards, primary blockage, 4” steel packer wheels, 550# trips, SFB single dick openers with closing wheels, dry fertilizer delivery with 430 bushel John Deere 1910 commodity cart, variable rate, 8” auger, powered calibration, 30.5x32 cane and rice, NH3 hitch, duals on front cart, fill lights. #16005199. (3).......... $177,500

John Deere 4020 cab, syncro transmission, 23.1-30.00 front with 158 loader & grapple. #16003637. (4).....$12,500

2007 Bourgault 5710 53-ft. air hoe drill with 9.8” spacing, stealth 1” openers, single shoot, mid row banders, NH3 system, rock guards, solid steel press, leading 6350 air tank, 8” loading auger, auxiliary lights, 2-tank cart, 30.5x32 cleats. #16005138. (2)...............CALL 2005 Bourgault 5710 53-ft. air hoe drill, 10” row spacing, 450# trips, square seed boots, speed lock adapters, mid-row II banders, double shoot air system, L6450, 3-tank leading air seeder, 10” hydraulic assist load/ unload auger. #16005207... $153,500

2004 Bourgault 5710 54-ft. air hoe drill with mid row banders, 9.8” spacing, 3-1/2” steel packers, 450# trips, 3/4” carbide tips, 5350 tow behind air seeder. #16005194............... $82,000 2002 Flexi-Coil 5000 air hoe drill, steel packer wheels, 2340 air seeder. #16005208. (4)...................... $75,000 2000 Flexi-Coil 5000 51-ft., 12” spacing, 550# trips, 5.5” spacing semipneumatic packer wheels, double shoot air package with stealth 4” paired row openers, basic pin sensor blockage with 2000 Flexi-Coil 3450 tow between variable rate air cart, single fan, 10” auger, 30.5x32-R3 diamonds with 2000 Flexi-Coil 2340 tow behind variable rate air cart with 50 bushel 3rd tank option, 8” auger, dual fan, 28Lx26 R-1 tires. #16005158. (1)....... $93,000 1998 Flexi-Coil 5000 57-ft., 71/2” spacing, stealth boots, carbide tips, 3x21 solid wheels with 3450 cart, one tank, 3 compartments, variable rate, single shoot, 30.5x32 diamond tires. #16005186. (4)...................... $39,000 AIR SEEDER 1998 Flexi-Coil 2320 tow behind cart, 7” auger mechanic rate, single fan, 230 bushel. #16005190. (1)............. $9500

CONVENTIONAL DRILLS

“New” Farm King

8x36 auger. #13014044

ONLY $3995 TILLAGE

Nows The Time To Prepare Your Stubble for next years seeding!

DEMO Summers Super Coulter 35-ft. disk, acremeter package, diamond disk, 340/65R18 on 18x11x8. #13011075.... ................................................... CALL 1998 John Deere 1810 52-ft. chisel plow with NH3 applicator with new Bourgault carbide tips, 3-bar harrows. #16004064. (3)............................................$24,000

Consumer Products 2009 John Deere 620i Gator with aggressive tires, OPS structure, deluxe property care package, rear screen, electric over hydraulic bed lift. #16007409. (2)............................................. $9500 2005 John Deere HPX 4x4 gator, gas, HPaggressive tread tires. #16007401..... . ............................................... $7000

2011 Case IH Scout XL diesel utility vehicle, Kubota 20 hp 719cc engine, power steering. #16007405. (2)......... . ............................................ $12,800 2009 John Deere X324 lawn tractor, 4-wheel steer, Kawasaki 22 hp engine, hydro transmission, 48” mower deck. 16007273................................. $3250

2011 John Deere 7430 MFWD, 96” rear axle, 2 CST-480/80R42, 2 STL front 420/85R28, 20/20 speed Ag Plus, 540/1000 PTO, 3 deluxe remotes, personal posture seat-air, bottom guard for fuel tank, loader ready package, 110 volt auxiliary heater, 200 amp alternator, premium lighting, signal interface socket, multipower outlet strip, cup holder, 1 pair inside cast wheel weights-450#, quick attach, 741 loader. #16006640..............$145,000

2007 John Deere 7830 MFWD, AutoQuad, deluxe cab, Auto Trac ready, dual PTO, 4 remotes, recent engine overhaul, 746 loader, 5-tine grapple, 8-ft. bucket. #16003518. (3)..$156,950 2002 John Deere 4115 3-pt., 24 hp, 2 hydraulic, 540 PTO, front tires 7.00x12, rear tires 35x12-16.5, hydro transmission with JD 410 loader. #16003613. (1).........................................$14,000 2000 John Deere 7210 MFWD, PowrQuad transmission, 3 hydraulics, 540/1000 PTO, 18.4x38 rears, 3-pt., JD 740 loader. #16003640. (2)........... . ............................................$51,000 1998 John Deere 4200 diamond tires 13.6x16 rear, 25x8.5-14 fronts, dual remotes with MID PTO, ROPS with mid mount mower. #16003641........... . ............................................$12,000

2009 Great Plains 2600 hydraulic folding 26-ft. disk drills, 7-1/2” spacing, liquid fertilizer attachment. #16005192. (1)... ................................................$47,500

2000 John Deere 1820/1900 air hoe drill, 60-ft., 7.5” spacing, 4x21” semi-pneumatic packers, rock guards, 1” stealth openers, 1900 air trank, 350 bushel tow behind, 8” load auger, 30.5/32 diamonds, 21.5L/16.1SL cleats, single shoot, primary blockage. #16005139. (3).......................................... $55,000

~ ATTENTION ~ COLLECTORS

Fordson tractor, parts machine.

2007 John Deere 7H17 walk behind commercial mower, electric start. #16007411............................... $2500 2003 John Deere GX345 mower, 20 hp Kawasaki engine, hydro, 54” mower deck. #16007422. (4)................ $3500 2-John Deere BG20021 rear bagger kits, fit 48” side discharge mower decks on L120 & L130 mowers. Each....... $399

406-228-2496 or 800-428-2496 Glasgow, MT (1) 406-765-1531 or 800-443-9447 Plentywood, MT (2) 406-485-2145 or 800-521-5800 Circle, MT (4) 406-787-6201 Culbertson, MT (3)

1980 John Deere 950 MFWD, 23 hp diesel engine, 27 PTO hp, 8F/2R manual transmission, 540 PTO, 3-pt., loader. #16003629...............................$8500 1973 John Deere 4630 2WD, powershift, 2 hydraulics, PTO, no 3-pt., 20.8x38 duals with Degelman dozer. #16003610. (4)......................$20,000

Check out our website: www.fesmt.com

After Hours Sales:

John Deere

1969 John Deere 4520 2WD, syncro shift, super single rears, no 3-pt., 1000 PTO with 260 loader. #16003378. (1)......... . ............................................$17,500

1972 International 1066 2WD, DT414 turbo diesel engine, 125 PTO hp, torque amplifier, cab, heater, air, 18.4x38 tires, 540/1000 PTO, 3-pt. hitch, 3 hydraulics, Leon 747 loader, 96” bucket, 3-tine grapple. #16003528. (1)..........................................$16,000

4WD TRACTORS

2008 John Deere 9630T deluxe comfort package, Cat 5 WS drawbar, extremity warning lamps, dual beam radar sensor, Premier lighting package, tool box, field vision Zenon HID light, right hand electric mirror, AM/FM radio/WB/ CD, instructional seat, F/Business band antenna. #16003638. (4).......$292,500

2007 John Deere 9630 deluxe comfort package, AutoTrac Ready, power differential lock, 800/70R38 duals, Premier lighting package, outside mirrors, leather trim, AM/FM, instructional seat, F/business band antenna, rotary beacon light. #16003553. (1)..$240,000 2006 John Deere 9520 scraper tractor, 4 remotes, 18 speed, 710/70R38 duals, standard comfort package, AM/FM/WB/ CD, instructional seat, right/left electric Rem adjust mirrors, 78 gpm hydraulic system. #16003551. (2).........$168,000 2000 John Deere 9400T track tractor, 36” tracks, wide swing drawbar, 3-pt., 6 cylinder, 425 hp, 4 hydraulic outlets, 24F/6R Powersync, 1000 PTO. #16003625. (3)......................$118,000

1989 John Deere 8960 370 hp, 20.8x42 duals, 24 speed synchro, Cummins 855, 1800 hours on overhaul. #16003521... ................................................$79,000 1976 John Deere 8430 QuadRange transmission, 18.4x34 duals, 3 hydraulics, PTO, cab with Degelman 12-ft. dozer. #16003609. (4)........................$22,000

1976 Versatile 900 20.8R38 duals, 12 speed manual, no PTO, no pt, 3 remotes, Cummins 903 V8 diesel. #16003639. (1)........................... $7500

ag management solutions global guidance

2012 John Deere 0709PC Greenstar 2 1800 display. #16012227. (4).....$1900 2011 John Deere 0709PC Greenstar 2, 1800 display. #16012235............$2000 John Deere 0705PC Greenstar 2, 2600 display. #16017232.....................$3000 John Deere 0705PC 2600 display. #16017230.................................$3000 2008 John Deere 0900PC Starfire ITC receiver. #16012240...................$1500 John Deere PF80860 Starfire ITC receiver. #16012223. ...............................$1500 John Deere 0330PC GS2 rate controller, 31 pin. #16012087. (1).................$600 John Deere PF90415 display controller bracket. #16012009 (1)................$145

Trader’s Dispatch, October 2012 – Page A62

PAYLOADERS, SKIDSTEERS, CRAWLER & ATTAChments

round balers

2006 Case IH RBX563 1000 PTO, big tires, bale kicker, surface wrap. #16006313 (3)...................... $22,500 2005 Case IH RBX562 twine tie, hydraulic lift, wide pickup. #16006411. (1)......... . ............................................ $21,000 2004 Case IH RBX562 hydraulic pickup lift, mesh wrap, wide pickup, bale kicker. #16006412. (1)........... $22,750 1989 Case IH 8460 twine tie, 540 PTO. #16007363............................... $5000

2010 John Deere 544K 4WD loader, 167 hp, powershift, transmission, 3-yard quick attach bucket, 2 lever 2-function loader control, standard ZB boom, air ride seat, standard rear hydraulic front axle, manual differential, 20.5x25 L3 tires, full front & back fenders, front & rear lights, environmental drain, reversible fan drive, axle cooler, 10 amp converter, cab, air, radio. #16003605... ............................................. $167,000 2005 Bobcat S250 skid steer with 2-speed, cab, air, heat, defrost, power tach, advanced hand controls, 12-16.5” 12 ply tires, 74” bucket with tooth bar, 1530 hours. #16008031. (3).............$32,500 1999 Bobcat 753 Advantage skid steer with bucket. #16008037. (3)....$11,500 2009 John Deere 544K 4WD loader, W0 AX disc transmission, standard ZB boom with standard linkage, conventional steering, cloth air suspension seat, 3 function valve with 2 lever control, ride control, standard rear hydraulic front axles, axle manual differential lock, 20.5x25 16 PR L3 bias tires, full front & rear fenders for muddy applications, HD LED rear lights, standard rear hitch, cab with air, 3 yard 105.9” bucket, ether start aid, engine block heater, precleaner, reversible. #16003496. ........ $159,500 2009 John Deere 544K 4WD loader, 167 hp, powershift transmission, 3-yard, 105.9” quick attach bucket, 3 lever 3 function hydraulic control, standard ZB boom with standard linkage, air ride seat, standard rear hydraulic front axle, manual differential lock, 20.5x26 16-ply L3 bias tires, full front & rear fenders, HD R led rear lights, standard rear hitch, cold start package, precleaner, environmental drain, reversible fan drive, axle cooler, AM/FM/WB radio, 10 amp converter, beacon. #16003552. (1)...............................................CALL

2003 Cat 226 skid steer, Joystick control, 53 hp, 1500# operating capacity. #16008038.................................CALL 2006 John Deere BL8 snow/utility blade, off JD 240 skid steer. #16009195......... ...................................................$2500

2011 John Deere KV24758 84” utility bucket with edge. #12400161....$1401

2011 Genim AWSBN108 9-ft. skid steer snow bucket. #13012265...........$3650

JOHN DEERE 2010 John Deere 568 surface wrap, 1000 PTO, hydraulic lift Megawide pickup, dual gauge wheels, push bar, chain oiler system, variable core kit, surface wrap, light kit, moisture tester, rock guards. #16006394............... $40,750 2009 John Deere 568 surface wrap, 1000 PTO, 21.5L-16.1 flotation tires, hydraulic lift mega wide pickup with dual gauge wheels. #16006438. (1)... . ............................................ $32,000 2008 John Deere 568 surface wrap, 1000 PTO, 21.5L-16.1 flotation tires, hydraulic lift Megawide pickup, push bar. #16007347. (1)............... $32,500 2004 John Deere 567 Mega tooth/wide pickup, twine, hydraulic pickup lift, pickup gauge wheels, bale push bar, bale ramps. #16006430. (1).. $19,000 2001 John Deere 567 bale push bar, Mega Wide pickup, surface wrap. #16006388. (1)...................... $22,500 2001 John Deere 567 with 1000 PTO, wide pickup, push bars, hydraulic pickup lift. #16006361. (4)..... $22,000 2000 John Deere 566 regular pickup, gathering wheels, twine tie, 1000 PTO. #16006342. (4)...................... $12,000 1998 John Deere 566 1000 PTO, 31x13.5 tires, Mega Tooth pickup, hydraulic. #16006273. (2)...................... $10,750 1998 John Deere 566TW round baler, 540 PTO, big tires, push bar, dual gauge wheels, hydraulic pickup. #16006291. (4)............................................. $9995 1997 John Deere 566 540 PTO, regular pickup, surface wrap, hydraulic pickup. #16006368. (1)...................... $10,000 1996 John Deere 566 540 PTO, hydraulic pickup, dual gauge wheels, push bar, twine tie. #16006248................ $9750 1988 John Deere 530 twine tie, 540 PTO. #16006421............................... $1200

2011 John Deere fork lift attachment with 5-ft. forks, fits payloaders with quick attach system. #16010020.........$4500

2009 John Deere 315 skidsteer with 10x16.5 extra-wall tires, hand only controls, block heater, rear counterweight, suspension seat kit, top window, 60” dirt bucket with cutting edge. #16008040. (1)............................................$19,600

HESSTON 2001 Hesston 856A 540 PTO, twine only. #16006365. (1)...................... $13,000

UP TO 3 YEARS INTEREST FREE

On Used Equipment - oac 3-pt Hitch Equipment & ATTACHMENTS

2012 John Deere BU1060 bale unroller, hydraulic actuation. #13009131..$1950

2012 Frontier GM1084 84” rear grooming mower, rear chin shield, pneumatic tires. #14401655...................... $4350 2012 Frontier GM1072 rear grooming mower, rear chain shield, pneumatic tires. #13009134. (4)................ $3995

2012 Genim HD3748W skid steer 48” pallet fork. #13012315...........................$995 John Deere 1010 crawler, gas, 4 cylinder gas, dozer blade. #16009198.....$7000

NEW HOLLAND 2009 New Holland BR7090 82” pickup, Bale Command, surface wrap, super sweep pickup, 1000 PTO, hydraulic pickup lift. #16006446. (1)..... $29,000 2007 New Holland BR780A bale ramp, xtra sweep pickup, surface wrap, gauge wheels, 1000 PTO, Bale Command Plus. #16007361......... $21,000 2006 New Holland BR780A surface wrap, hydraulic lift extra-sweep pickup, 1000 PTO, hi flotation tires, bale kicker. #16006433............................ $22,000 2001 New Holland 688 net wrap, crop saver wheels, hydraulic pickup lift. #16006356. (1)...................... $10,750 1994 New Holland 660 1000 PTO. #16007359............................... $3500 VERMEER 2010 Vermeer 605SM net with twine, 11,000 bales. #16006445...... $22,000 2006 Vermeer 605M 21.5x16 flotation tires, HD bale ramp, hydraulic pickup lift, net wrap. #16006422. (3).$22,000 2003 Vermeer 605XL 1000 PTO, twine & net, gauge wheels, bale counter, push bar. #16006434..................... $10,500 1999 Vermeer 605L round baler, accu bale, twine & net, bale kicker. #16006382. (2)........................ .$7500

CASE IH 2010 Case IH RB564 480/45-17 flotation tires, hydraulic pickup, mesh wrap, wide pickup, extra sweep. #16006441. (1).......................................... $28,000

2012 Frontier RC2084 7-ft. rotary mower, front & rear chains, laminated rear tire. #14401769............................... $3800

2012 Frontier AP12K fixed pallet fork, fits global carries Cat 2. #14401775. (4).. . ............................................... $3500 2012 Frontier AP12K fixed pallet fork, fits JD loader with global carrier. #14401774. (1)......................... $3500 2012 Frontier AP12A fixed pallet fork, 48”, fits 800 series JD loader. #14401773.. . ............................................... $2150 2012 Frontier AP13G 48” pallet fork, fits JD global carrier. #13009123. (1)....... . ............................................... $1400 2012 Frontier AP13G 48” pallet fork, fits JD global carrier. #13009122. (1)....... . ............................................... $1400 2012 Frontier AP13G 48” pallet fork, fits JD global carrier. #13009121. (1)....... . ............................................... $1400 2011 Frontier AP13F 48” floating pallet fork, fits JD 200/300/400/500 series combine. #14401103. (2).......... $1475

2012 Road Boss 14-ft. road grader. #13012306............................... $9500 2011 Buhler 10-ft. rear blade, rear blade assembly. #16009205. (4)........ $4900 2009 Farm King Y750R 7-ft. grooming mower, rear discharge. #16007423. (4)............................................. $2100 Loftness 9-ft. snowblower. #16007398. (2)............................................. $5500

Up to 10,000 bushels/hour during full bin load-out!

2003 John Deere 240 skid steer, hand controls, diesel, 3 cylinder, 66” bucket. #16008039. (1)........................$13,500 2007 Genim MFE84B skid steer, 84” bucket with grapple fork attachment. #16008035.................................$3575

4000-5000 bushels/hour with 50 feet of hose at full bin load-out! 5500 bushels/hour from a bin sump with 35’ pipe on full bin load-out! Farm Equipment Sales

Plentywood - 406-765-1531

Glasgow - 406-228-2496 Culbertson - 406-787-6201

2012 Frontier 2310 10-ft. blade. #13009050. (1)......................... $4500

IN STOCK Circle - 406-485-2145

After Hours Sales:

John Deere

2004 Farm King Y9600 8-ft. snowblower, double auger. #16007402. (1).. $2500

2012 Frontier RB2284 7-ft. medium duty blade. #13009051..................... $2500

Danuser F8 3-pt. post hole digger with 12” auger. #16010018.................... $1475

NEW XL78 rockpicker

IN STOCK

Fast, clean, tough and efficient. We’ve made the XL-78 to pick rocks faster, and with less dirt in the bucket. They’re tough farm hands that stand up to the rough and tumble world of rock picking and you can depend on them to get your rock picking jobs done quickly and easily. • The XL-78 has a picking width of seven feet. • Large bucket capacity. • The XL-78 dumps rocks 7 feet - plenty of height if you’re using a truck or trailer to haul rocks off the field. • Hydraulic reel drive • Heavy duty, high efficiency parallel drive gearbox.

Trader’s Dispatch, October 2012 — Page A63

3-V Distributing, Inc.

Conrad Industrial Park

Box 955

Conrad, MT 59425

Phone 406-278-5400 or 1-800-310-5402 Evenings Call: Jordan VanDyke 406-450-3953

Visit us on the web http://www.3vdistributing.com

E-mail Address 3vdist@3rivers.net

We are your dealer for the finest aluminum grain body available

ies d o b in a r G l ! a r W e O v e N S CK O T S IN

SCHEDULING FALL BUILD TIMES

Put our 30+ years of experience installing the ITB body to work for you!

Lift Axles in Stock

We’re ready to mount yours so you’re ready for your fall cattle/grain hauling!

New shipment of pickup flatbeds IN STOCK

Bale Beds

Check out our Facebook page. Tag us in your photos or email photos of your trucks to 3vdist@3rivers.net and we will put 675 DewEze balebed in stock. them up on the Ready to mount, page!! LED lights, wireless remote

Trader’s Dispatch, October 2012 — Page A64

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

TRUCKS, TRAILER & GRADER FOR SALE

2000 Peterbilt 379 EXHD 550 Cat, 15 speed, 244” wheelbase, 63” Unibilt sleeper, 3:53 rears, steerable lift axle, virgin 24.5 tires, Herd grill guard, chrome visor, chrome bug shield, wood steering wheel, wood arm rests, purple (sharp looking truck). Ready to go to work...................................................$34,000

2001 Wilson 53-ft. x 102” triple axle cattle trailer, 3rd axle lift, nose and hog decks, good overall condition................................$30,000

1997 Kenworth W900L 550 Cat, 13 speed, 275” wheelbase, 80” studio sleeper, 3:70 rears, steerable lift axle, new tires and brakes, Herd grill guard, red with gray fenders, recent engine work. Good dependable truck............. ..........................................................$29,000

1986 John Deere 770A motor grader, 14ft. MB, front scarifier, radial tires, new tire chains, ex-county machine with low hours..... ..........................................................$28,000 Contact Shane at (406) 861-9943, Hardin, Montana

Year nty warra

New TYM 723 74 hp, MFWD, 24 speed LH Power Shuttle with loader............$37,995

We have new 23-100 HP tractors Call us!

yellowstonetractor@yahoo.com www.yellowstonetractor.com

BELGRADE, MT

Yellowstone Tractor Co.

406-388-2423

NEW TYM With 90 Horsepower Perkins Diesel

• MFWD • LH Power Reverser Transmission • 540/1000 PTO • 3-Point Hitch • Heavy Duty Loader

$47,500 or $7478 Annual - OAC

Only 1 rice at this p

* Limited Time Only*

We now have a full service dealer in Western Montana – Please Call Us

WE NEED YOUR CONSIGNMENTS

AUTOS - FARM - CONSTRUCTION - MISCELLANEOUS

Consigned Equipment

TYM 603 4WD, cab, air, heat, loader and 351 hours. 60 hp. Cat diesel.............................................................$27,995 Kubota 2910 4WD loader, front mounted snow blower....$18,500 Titan 4WD, 32 hp, loader, 155 hours........................$8995 Yanmar 1550 4WD with loader and new tires...........$3995 Massey-Ferguson T035 with loader........................$3750 Massey Ferguson 1100 tractor................................ Coming In International TD-15 crawler, hydraulic blade, winch......$15995 2008 Ditch Witch R300 4WD, shark chain, 245 hours....... . ...........................................................................$19,000 1994 GMC Top Kick, Cat diesel, flatbed with hoist..$14,500 1977 International 1600 truck with 14-ft. dump body, high sides.......................................................................$3500 Trail King 22-ft. 3 axle tag trailer..............................$4660 John Deere Model H manure spreader........... Coming In Erskine 6-ft. snow blower, 3 point, PTO...................$1600 14-ft. heavy duty tandem disc with 22” blades..........$2500 Eagle 6-ft. tandem disc, 3 point, notched blades......$1100 Case 3-pt., 4 bottom plow.........................................$1500 Sitrex 3-pt., 3 wheel rake...........................................$850 Land Pride 5-ft. finish mower................... Call For Pricing

2000 Ford F350 V10 gas, automatic, dually, chassis, cab, 64,000 miles...$11,500

NEW UNITS FOR SALE 5 YR WARRANTY

23HP 4WD LOADER....SALE PRICE $12,780 29HP 4WD LOADER....SALE PRICE $15,500 35HP 4WD LOADER....SALE PRICE $16,850 ALL UNITS ABOVE CAN HAVE FACTORY HEATED CABS!

prices subject to change

Call us on our new Tytan 3 pt equipment We have financing available.

$28,300

Need a new loader? Call us, we have the best prices!

50HP 4WD cab, air, heat, hydro loader

Protect horses from West Nile virus

By NDSU Extension Service Horse owners need to protect their animals from the West Nile virus, North Dakota State University (NDSU) Extension Service equine specialist Carrie Hammer advises. Numerous states are reporting an increase in the number of equine West Nile virus cases this year. The U.S. Geological Survey’s disease map reports 157 cases in 31 states as of August 28. In contrast, only 119 cases were reported in all of 2011. Louisiana is the leading state with 26 reported positive cases, while North Dakota ranks fourth with 10 cases. “Horses become infected with the West Nile virus after being bitten by a mosquito,” Hammer explains. “The virus is not contagious from horse to horse or from horse to humans.” The virus affects the horse’s brain and spinal cord; thus, depending on the area affected, clinical signs can vary in range and severity. Some of the more common clinical signs include incoordination (especially of the hind limbs), muscle twitching, depression or heightened sensitivity, stumbling, toe dragging, inability to get up and death. “Unfortunately, approximately 30 percent of horses that show severe clinical signs will die,” Hammer says. “Many horses that survive the initial illness will have residual effects, such as an altered gait or behavior for months.” No specific treatment is available for horses affected with the virus. Treatment will depend on clinical signs and focuses on controlling pain and reducing inflammation. Owners should consult with their veterinarian immediately if they suspect their horse may have the virus. Prompt and early treatment often can minimize the severity of the disease. The American Association of Equine Practitioners (AAEP) lists the following guidelines to help protect your horse against the West Nile virus: • Vaccinate your horse. The AAEP vaccination guidelines are available at http://www.aaep.org/wnv.htm. Horse owners should talk with their veterinarian to ensure their animals are vaccinated properly against the virus. • Eliminate mosquito-breeding sites (old tires and other containers that hold standing water). • Use larvicides when eliminating certain mosquito breeding sites is not possible. Be sure to consult with your local Extension agent or mosquito control authority before taking this action. • Clean water troughs at least monthly. • Keep your horse indoors during peak mosquito activity periods (dusk to dawn) if possible. • Install fans over horses (mosquitoes have trouble flying against the wind). • Avoid turning on lights in the barn during the evening. • Use insect repellants and/or fly sheets and masks that are designed to repel mosquitoes. “Many horse owners have stopped vaccinating against the West Nile virus because the number of cases has been low in recent years,” Hammer says. “This year is a reminder that the virus is still here and should not be forgotten.”

Hibiscus shrub

By Ron Smith, Horticulturist, NDSU Extension Service Q: I planted a hibiscus shrub that gets flowers the size of a dinner plate. I’ve had the plant for three years. This year, it is much bigger and loaded with buds. I was so excited until I noticed the buds are yellowing and something’s eating the leaves. The leaves look like lacy Swiss cheese. I sprayed the buds with Sevin, but I’m still seeing what looks like a strange type of beetle that I have never seen before. I know the beetles probably are eating the leaves, but why the yellowing buds that are falling off? I water it correctly and use Miracle-Gro. Could it be the mild winter and very hot July? Thanks for your time and knowledge. (Putnam County, New York) A: This sounds like the work of Japanese beetles. Try to capture one or get a photo and send it to me. They have voracious appetites and are common in your part of the country. The yellowing and dysfunctional appearance of the buds could be due to thrips feeding on the buds before they open. Try using Orthene insecticide because it has contact and systemic activity. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C65

UW Extension educator joins county office By University of Wyoming Extension

Steel Prices Are Going Up...Don’t Wait!

How Do You Deal with the SPCC* Rule for Farm/Ranch fuel storage?? Call Wilray about double wall vertical & horizontal fuel tanks THIS WILL TAKE CARE OF YOUR SPCC REQUIREMENTS! *Meets EPA Requirements For Spill Prevention, Control & Countermeasure (SPCC)

Secondary Containment UL142-23 horizontal and vertical double wall fuel tanks 500 to 10,000 gallon

Brandon Greet joined the University of Wyoming (UW) Extension office in Washakie County Monday, September 10, as profitable and sustainable agriculture systems educator. “I was very excited to accept this position with UW,” said Greet. “I have enjoyed my time as a student at UW and look forward to combining that with serving the clientele in the community I grew up in.” Greet is a Ten Sleep native and was raised on his family’s ranch. He attended UW and received a bachelor’s degree in agroecology with a minor in animal science in 2011 and his master’s in agronomy this August. “I enjoy agronomy because it is a field where a person can watch their success grow before their eyes, but no two years are ever the same,” said Greet. “There are always new tools or problems to be dealt with. Agronomy is important to the state of Wyoming because this is a state that supplies energy and food to the rest of the nation. We pride ourselves on being a state that others rely on and improving our agronomic practices will aid in the continuation of that tradition.” Greet will serve Park, Big Horn, Washakie, Hot Springs and Fremont counties and the Wind River Indian Reservation with emphasis on crop systems, small-acreage management and horticulture. “We are fortunate that Brandon has chosen a career with UW Extension,” said Kelly Crane, associate director of UW Extension. “His academic training in agronomy combined with his research and practical experience in Washakie County provide Brandon an exceptional foundation to become an outstanding area educator.” Greet served as an Ag Ambassador for the College of Agriculture and Natural Resources while a student at UW. “As an educator, I look forward to helping to bridge the gap between research and production for the people of this community. I want to make the information they need as easy to access as possible.”

Russian olive cuts

By Ron Smith, Horticulturist, NDSU Extension Service Q: I am interested in taking cuts off of Russian olive shrubs to transplant into hedge rows. What would the procedure be? A: Are you sure you want to propagate Russian olives? Think it over carefully before doing so because there are a lot of problems associated with this species. They can root from cuttings taken in October and treated with a rooting hormone. The success of such attempts is 20 to 25 percent under ideal conditions. Seed is the preferred method of propagation, but the seeds need stratification for 60 to 90 days at 41 degrees F before planting. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/ndsuag/lawnsgardens-trees.

VERTICAL FLAT BOTTOM FUEL TANKS 3,000- to 12,000 Gallon

Fuel tank containment available for your single wall tanks to meet your SPCC requirements

5th wheel or pintle hitch

CALL WITH YOUR NEEDS...TANK PRICES REDUCED

Custom Built trailer for self-propelled sprayer and/ or combine

From $17,000 to $21,000

Pulls easier than a dually!! 8’6”x20-ft. flatbed gooseneck with 4-ft. popup Beavertail

NEW!!

$8095*

★ 20,000# GVW ★ Electric brakes ★ Ramps ★ Lights ★ Single 23575R/17.5 tires (each tire carries 6000#’s) ★ 2 YEAR WARRANTY 2-Year Warranty

20-ft. Gooseneck Car Hauler 14,000# GVW, 82” between fenders, electric brakes on all axles, LED lights, 2x12 wood fir deck with Rhino lining, one 12,500# spring loaded jack, 2 5/16” Bulldog 25,000# adjustable hitch, 4” stake pockets, D-ring tie downs, diamond plate fenders with steps, 8-ft. slide-in and flip-up ramps with supports, epoxy primer and paint, 235/80x16 10-ply tires. 2-YEAR WARRANTY.... $4895

Heavy Duty Car Hauler

6’6” W x 18’ long

7000# GVW.......................... $2825*

8-ft.6”x20-ft. Tandem Axle gooseneck with 4-ft. pop up beavertail, electric brakes, lights, wood deck, stake pockets, 2:35/85Rx16 10-ply tires, ramps, 10,000# jack. 14,000# GVW. Beavertail pops up to make 24-ft. flatbed............... $5795* Above trailer as 16,000# GVW................... $6795* 8-ft.6”x20-ft. Tandem Dual gooseneck flatbed with 4-ft. popup Beavertail. 20,000 #GVW.... $8395*

2-Year Warranty

✔ 5000# tongue jack ✔ Electric brakes 10,400# GVW....................... $3325* ✔ Treated wood deck ✔ 15” radial tires 14,000# GVW, 20-ft.............. $3725* ✔ Stake pockets ✔ 2” ball hitch ✔ 8-ft. ramps *LED lights and Rhino Line deck are standard equipment on all trailers.

Check us out at: wilraymfginc.com

406-622-3861 Wilray Manufacturing Fort Benton, Montana — Evenings call 406-622-3747 NEW HOURS: Monday - Thursday 7:00 am to 5:30 pm

Trader’s Dispatch, October 2012 — Page A66

Deadline for ads in the November issue is Friday, November 2.

New Stur-D Porta-Tub - FOR SALE OR RENT

Round Bale Feeders

One piece welded construction gives you many years of maintenance-free service. Approximately two feet of solid skirting means less hay waste. Solid, high tensile steel slant bars available in spacing to suit your needs.

MILK RIVER CO-OP Call 406-654-2022

Big Sandy, MT - 406-378-2306 Rudyard, MT - 406-355-4154 Havre, MT - 406-265-2275 Turner, MT - 406-379-2275 Chinook, MT - 406-357-2280 Malta, MT - 406-654-2022 Harlem, MT - 406-353-2490

THE GEAR HOUSE, Inc. Helena’s Truck Drive Train Parts Store and Gear Shop Transmission and Differential Rebuilding

♦ EATON AND ROCKWELL DIFFERENTIALS ♦ FULLER AND SPICER TRANSMISSIONS ♦ EXCHANGE UNITS READY TO SHIP ♦ NEW UNITS AVAILABLE ♦ RATIO CHANGES AND CUSTOM BUILDING ♦ LIGHT TRUCK AXLE,TRANSFER CASE, AND TRANSMISSION REBUILDING

OTHER TRUCK PARTS WE CARRY Rebuild parts for Transmissions and Differentials Bearings, Axle Shafts Wheel Seals, PTO Components Yokes, U-Joints, Clutch Packs Pickup Transmission & Differential Parts

REBUILD COMPONENTS FOR TRANSMISSIONS AND DIFFERENTIALS BEARINGS, AXLE SHAFTS WHEEL SEALS, PTO COMPONENTS YOKES, U-JOINTS PICKUP TRANSMISSION & DIFFERENTIAL PARTS

2920 Billings Avenue Unit #C

Helena, MT 59601

406-449-7490

Potential shift in Texas cotton acres could occur

High grain prices as a result of continuous drought in the Midwest could cause a potential shift in some Texas cotton acreage looking ahead to the 2013 crop year, according to Texas A&M AgriLife Extension Service economists. Dr. John Robinson, AgriLife Extension cotton economist in College Station, said you would have to look back six years to when the Lone Star State last saw a significant change in cotton acres. Cotton prices are predicted to be in a tight range in the near term, although changes in world supply projections could trigger fluctuations. Producers can rely on options contracts to take advantage of price swings in both an up or down market. (Texas A&M AgriLife Extension Service photo by Blair Fannin) “The last time we had a major reduction was over 20 percent in 2006-2007 as a result of higher grain prices,” he said. “Even though we don’t grow a lot of soybeans, I hear stories of high sorghum prices that will tempt a lot of growers. I wouldn’t be surprised to see our acreage drop down 20 percent to about 5 million cotton acres.” “There is the possibility, but it is limited,” said Dr. Mark Welch, AgriLife Extension economist in College Station. “Grain sorghum in the High Plains is secondary if they have a failed cotton crop. Overall, cotton farmers are cotton farmers.” The outcome of the 2013 wheat crop is the biggest question, Welch said, as prices continue an upward trend over the past three months. “If we get a bunch of rain, this could lead to a lot of opportunity,” he said. Texas plants approximately 6 million wheat acres. If the state receives ample rain this fall, there could be an increase in harvested acreage and possibly an increase nationwide. This is in response to wheat following the recent run-up in corn prices, eclipsing more than $8 a bushel, Welch said. “We are certainly setting ourselves up for a very large grain crop in 2013,” Welch said. Robinson said cotton prices will “pretty much stay in a sideways channel.” “They’ve been just under 70 cents a pound to most recently 77 cents a pound,” he said. “I’m expecting a continuation of a range, sideways action pattern bouncing around with some outside news. I’m expecting prices to trade anywhere from 80 cents to the low 70s.” Robinson said prices could react accordingly to some type of world supply news, such as India, which hand harvests its cotton and could possibly come up a million bales short of expectations. “That might generate a market rally,” he said. Marketing strategies for cotton producers this late in the season are limited. “There is not much in the options world you can do at the moment,” Robinson said. “I think right now just getting the best cash offer you can is the main thing. If you are shopping around for call options you might be able to catch any upside surprise.” Robinson said producers could take advantage of any possible volatility on the December 2013 futures by buying options “way in advance, so it may be worth shopping and thinking about what is affordable and what the price direction is.”

Getting rid of cutworms

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a lady who has some kind of pest eating holes in her peppermint plants. These pests are doing a lot of damage. The pests also are damaging one of her tomato plants. She would like to use something all natural to get rid of the pests. Would Bt work for something like this? Also, she has cutworms in her corn. Is diatomaceous earth matter the best way to get rid of the cutworms? A: If she has cutworms working on her corn, I suspect she has another variety of the beast called the climbing cutworm working on her peppermint and tomato plants. Similar to typical cutworms, climbing cutworms do their dirty work at night. We had a peak in their activity recently, so now they are gone. Sevin or diatomaceous earth will take care of both species. Bt might be OK but takes too long to work on vegetable crops. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Trader’s Dispatch, October 2012 – Page A67

2000 Gehl DL8H telescopic forklift, 8000 lb capacity, 42-ft. reach, 4x4x4, 3150 hours. Good clean machine................$28,850 2008 Cat D6T dozer, semi-u blade, cab, air conditioning, ripper, only 1700 hours. Like new!!!!................................ $274,000

1998 Case 621B wheel loader, 2.5 cubic yard bucket, 3rd valve auxiliary hydraulics, good tires, cab, air conditioning. Nice clean wheel loader..................................................$45,550 1997 Case 721B wheel loader, 3 yard bucket, cab, heat, good front tires, fair rear tires, tooth bucket, auxiliary hydraulics. Good clean wheel loader........................................$44,440

2002 Gehl 663 telescopic forklift, 6000 lb capacity, 37-ft. reach, 4x4x4, very good tires, 2600 hours. Nice machine..$30,350

2004 Volvo L70E wheel loader, cab, air conditioning, hydraulic quick couple, new tires, hour meter reads 4800 hours. Really nice machine with low hours...................................$65,900 1988 Fiat-Allis FD7 dozer, great shape, good undercarriage, 6 way blade, sweeps, winch with arch. Ready to go to work!..... . ................................................................................$19,900 2004 Ingersoll-Rand VR642C telehandler, 6000 lb, 42-ft., 4x4x4, 1800 hours. Great condition....................................$31,550

1975 Allis Chalmers 645B wheel loader, 3 yard bucket, cab, heat, good tires. Ready to work!..............................$19,900

2002 Cat 303CR mini excavator, hydraulic thumb, 18” bucket, great tracks, 3000 hours. Tight, 8000 lbs.................$17,900 1987 Case 585E straight mast forklift, 5000 lb capacity, 2WD, good tires. Good working condition.........................$14,400 2000 JLG 330CRT Big Scissorlift, 4WD, rough terrain, great tires, 2200 hours.....................................................$10,450

Call us about Attachments!

2005 Bobcat T190 skidsteer. Good tracks, tight, 2000 hours, work ready...............................................................$22,350 1999 Bobcat 753 skidsteer, 43hp, 1300 lb capacity, fair tires. Good tight machine.................................................$11,500

2008 Bomag BW124DH-3 roller, smooth drum, new tires. Only 1000 hours!.............................................................$28,800

Skidsteer HD brush grapple.................................................. $2000 Cat integrated tool carrier telescopic jib. Call for details... $2000 Skidsteer 3 prong hay fork.......................................................$500 (2) Telehandler framing jibs, 12-ft. and 10-ft. Per unit.......... $1500

2004 Cat 420D backhoe loader, 4WD, extend-a-hoe, cab, air conditioning, very good tires, 3880 hours. Very nice and clean backhoe...................................................................$43,330

2005 Bomag BW145 smooth drum roller, 66” drum, 1000 hours. Excellent condition..................................................$33,333 Lincoln 400 welder/generator, both feeds, trailer mounted, low hours, great shape. Excellent condition!!!................... $8250 Sweepster 10-ft. broom for Cat backhoes and wheel loaders.......... ........................................................................................... $9500 Skidsteer 3 cubic yard dump hopper.................................... $3500

406-690-0737

• BUY • SELL • RENT Jim Niebur Billings, Montana

www.affordableconstructionequipment.com

Trader’s Dispatch, October 2012 — Page A68

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT THEM IS NOVEMBER 2.

✽

AgriPro Winter Wheat Seed AP503CL2 ✽ ✽ WestBred Quake Winter Wheat ✽ ✽ Certified Yellowstone Winter Wheat ✽ ✽ Winter Triticale ✽ ✽ Willow Creek Forage Winter Wheat ✽ ✽ Custom Pasture & Hay Mixes ✽ ✽ WL Alfalfa Varieties - Pioneer Alfalfa ✽ ✽ Complete Grass Seed Selection ✽ *See us for your CRP needs*

✽ Pioneer Corn Silage Inoculant ✽ ✽ Whole & Cracked Feed Corn ✽ DELIVERY AVAILABLE

We Buy Malt Barley, Feed Barley & Feed Oats Give us a call!

P.O. Box 130 Three Forks, MT 59752 l

406-285-3269 ~ www.circlesseeds.com

Pure Bliss Cycle, Inc. 609 So. Main St., Conrad, Montana

Phone 406-278-7583 Fax 406-278-7584

Producing apple trees to sell

By Ron Smith, Horticulturist, NDSU Extension Service Q: Though I am not from North Dakota (south of Green Bay, Wisconsin), I am hoping you can help me. What a wealth of information you have made available on the NDSU website with your question-and-answer format. It is much appreciated. You are obviously an expert among experts with your knowledge. I am seeking information on how to establish for sale proprietary trees from a new variety. My situation is that I have several hundred wild apple trees on my 38 acres. I have cataloged and marked about 12 trees with fruit that is unique and tasty (one has a hint of concord grapes after an October frost). I know the history of my property and have aerial photographs as far back as 1939. From the photographs, I have determined that the apple trees started growing sometime between 1940 and the present time. Most of the growth has taken place in the last 25 to 30 years. The lady I purchased the land from in 1985 told me that she and her husband lacked feed for their cattle during a dry year, so they fed apples to the cattle. However, she wasn’t sure where the apples came from (not from the farm). This took place sometime in the late 1940s or early 1950s. The cattle grazed the hilly nonfarmable portions of the 38 acres. I believe that cattle droppings are the source of the apples. The 12 trees I have marked have tasty and good-sized apples. They store well in a refrigerator and seem to have natural resistance. My immediate goal is to propagate the 12 to ensure continued lineage. I have had limited success with grafting, so I am going to try air layering this year. Because the trees are surviving on their own accord, I am convinced that the root systems are hardy enough without using root stock grafting if the air layering is successful. However, do I need to do root stock grafting because I will be producing a large number of saleable trees? Any tips would be appreciated, as well as guidance on establishing trademark/proprietary protection. Also, apple pies made from a mixture of seven of my favorite apples are out of this world and cannot be duplicated anywhere. Every mouthful tastes slightly different. Springtime blossoming is awesome, too. A: First, thank you for your very flattering remarks because I don’t consider myself an expert. I’m just a student learning more and more with each passing day. It sounds like you’ve got a gold mine of apples on your property. Asexual propagation is the best way to go to increase their numbers. I encourage you to contact the University of Wisconsin Extension Service for assistance. Go to http://www.uwex.edu/ces/ cty/ and click on your county to get in touch with an Extension agent. He or she should be able to hook you up with a specialist at the university who can assist you with getting the budding/grafting procedure rolling or recommend other propagation techniques that would increase your stock for sale quickly. The College of Agriculture (or whatever name it goes by) at the university should be able to provide you with guidelines for patent procedures. Your description of the apple pie sounds very tempting. Perhaps a local bakery would be interested in contracting with you to make pies to sell to the public. When I had my small raspberry farm in upstate New York, I did just that, so I really enjoyed the fruits of my labor. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Late black walnut

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a black walnut that is more than 20 years old. It has not produced leaves this spring. Is there a way to find out if it is dead or just late getting leaves? It has produced black walnuts twice in 22 years. The tree drops its leaves all at once and somewhat late in the fall. (Rapid City, South Dakota) A: Black walnuts usually break bud later than other species. Check the other black walnuts in your area to see if they are equally as behind. If yours is the only one, there is a potential problem. You should get in touch with the Extension Service agent where you live to have him or her see if any disease or insect problems exist. This just may be the genetic temperament of this particular tree or it is reacting to the weird winter/spring weather we’ve had in this year. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

3V Distributing, Conrad ......................................A63 Action Toys, Billings ............................................A27 Affordable Construction Equipment, Billings & Bozeman................................................................A67 Ag Trucks & Equipment, Great Falls..B19, B20, B21 Ag West Distributing Co., Great Falls .................C64 Ag Wise, Kremlin ................................................C66 AgraSyst Dealers ...................................... A50, C65 American Manufacturing, Hogeland ...................C38 American Pipe, Cut Bank ...................................A53 Automotive Machine Inc., Great Falls.................A12 B & B Ag Supply, Inc, Broadview .......................C50 B & J Trucking, Kalispell .....................................C22 Barber Seed Service, Denton ..............................C1 BASF....................................................................A8 Basin Seed, LLC, Standford ...............................A32 Bass Auction Co. Inc., Lewistown.......................C28 Bell Motor Co., Cut Bank....................................A54 Ben Taylor, Valier ................................................A45 Big Equipment Co., Havre ..................................C21 Big Sky Equipment, Conrad ...................... A34, A35 Big Sky Hydraulics, Great Falls ..........................A32 Big Sky Sawmill & Wood Products, Vaughn .......C32 Big Sky Wholesale Seeds, Shelby ............ A28, C27 Bouma Post Yards, Choteau ...............................A42 Brandt Agricultural Products LTD .......................A24 BTI Feeds, Cut Bank ..........................................A45 C Moore Fab & Repair & Equipment Sales, Miles City ..................................................................B7 Cascade Machine & Supply, Great Falls ... A46, C42 Case IH Dealers.................................................C63 Chic Harbine Sales, Missoula ............................B11 Circle G Salvage, Walhalla, ND..........................C24 Circle S Seeds, of Montana, Three Forks ..........A68 Courtesy Ford, Conrad ......................................B17 Cox Ranch Equipment, Winston ........................C32 Cut Bank Tire, Cut Bank.......................................B7 Dave’s Repair LLC, Charlo .................................C20 Denny’s Service & Repair, Black Eagle..............A53 DeVoe’s, Valier ...................................................C14 Dick Irvin Trucking, Shelby .................................C34 Diesel Power Parts & Machine, East Missoula ..C49 Dillon Imp (now Frontline Ag Dillon) ...................A41 Dirkes’, Fairfield & Choteau................................C65 Doane Western of Montana, Bozeman ..............A46 Dry Fork Ag, Ledger...........................................C16 Durnell Fencing, Valier .......................................C40 Eagle Equipment, Belgrade ...............................C40 Eddy Bauer, Wolf Point.......................................C58 Enduraplas, Neche ND ......................................C23 Equipment Connection, Columbia Falls ................... ..................................................... C12, C13, C14

Index Escrow Montana LLC, Whitefish ........................C50 Exchange Services, Inc, Whitefish .....................A48 Farm Equipment Sales, Glasgow, Plentywood, Culbertson, Circle ......................A59, A60, A61, A62 First State Bank, Shelby.....................................C16 Fisher Metal Products, Fort Benton ..........C20, C24 Flaman Rentals ..................................................C57 Flaman Sales & Rental, Power ................. A43, B16 Fosse Insurance Agency, Great Falls .................C64 Fraser’s Oil Inc., Inverness .................................C51 Frieling’s Agricultural Equipment, Great Falls .......... ...............................................A25, C7, C44, C67 Frontline Ag, Choteau, Conrad, Cut Bank, Dillon.....................................A28, A38, A39, A40 Frontline Ag Dillon (formerly Dillon Imp), Dillon....A41 Fuson Excavation & Trucking, Conrad ...............A20 Gerber’s, Great Falls ................................. A42, C52 GL Appraisal & Brokerage, Glenn Larson, Opheim . .......................................................................A50 Glasgow Implement, Glasgow .............................C5 Golden Harvest Seeds, Big Sandy.....................C31 Gomer’s Diesel & Electric, Missoula ..................A51 Gregoire Insurance, Havre .................................A24 Greyn Fertilizer, Choteau, Dutton, Valier ............A15 H & H Spreading, Conrad ..................................C58 Heartland Seed Company, Moccasin .................C23 Helfert’s Helena Farm Supply, East Helena .......B12 Henke Enterprises, Chester ..............................A23 Hi-Hog Equipment................................................B1 Highline Communications, Cut Bank..................C22 Hoven Equipment Co., Great Falls ............ B22, B23 Huggy Bear’s Consignment, Cut Bank .................B5 I-State Truck Center, Missoula ...........................B16 IMS Construction, Columbia Falls ......................A52 ITB (Intercontinental Truck Body), Conrad .........C46 J & J Homes, Williston, ND ................................A58 J & M Trailer Sales, Laurel..................................A14 J.A.R.R., Choteau ..............................................C38 Jamieson Motors, Inc., Chinook .................. B2, B24 Jim Nielsen Trucks & Parts, Butte ........................C1 K.R. Rauch Company, Billings..............................C9 Krogmann Mfg....................................................C62 Lake Seed, Ronan ...............................................C4 Lewistown Honda, Lewistown ...........A44, C22, C46 Lewistown Livestock Auction, Lewistown ...........A36

LM Machinery, Missoula.......................................B3 Lost Valley Fence, Fairfield .................................C29 M & R Seed Cleaning, Watford City, ND ............C41 M & W Machine, Three Forks .............................C26 Maxwell Lumber, Lewistown ..............................C22 Midland Implement , Billings ..............................C20 Milk River Co-op, Big Sandy, Chinook, Havre, Malta, Rudyard, Turner .............................................A66 MK Industries, Conrad .......................................C26 Montana Metal Fabrications, Inc, Great Falls .....A30 Montana Post Driver, St Ignatius ........................C25 Montana Post Frame, Townsend ........................C52 Montana Seed & Grain, Billings .........................A58 Moodie Implement, Havre, Lewistown, Great Falls, Livingston, Belgrade .............................C10, C11 Motor Power, Great Falls ......................................C8 Mountain Equipment, Belgrade ..........................C29 MT Tractors, Matt Pendergast, Stevensville .........C8 Musselshell Valley Equipment, Roundup ..C60, C61 N.F., Inc, Froid ....................................................A44 Nardinger Irrigation, Great Falls .........................A52 Neal Law, P.C., Conrad.......................................C66 New Holland Dealers .........................................C55 New Holland of Belgrade, Belgrade ...................A55 New Homes of the Future, Billings .....................A48 Northern Chrysler, Cut Bank ..............................C35 Northern Ford, Cut Bank ....................................C68 Northern Hydraulics, Great Falls ...............C34, C56 Northern Prairie Auto Sales, Wolf Point .... A44, A51 Northern Seed, Conrad & Shelby ......................C28 Northwest Plastics, Libby ...................................A28 Pacific Recycling, Great Falls ...............................C3 Parsons Farm & Ranch Realty, Lewistown...........A5 Patty Seaman Homes, Kalispell ...........................C2 Performance Ag Services, Conrad .....................A26 Power Motors Implement, Fort Benton.................B4 Powerhouse Equipment, Floweree.....................C64 Price Truck & Equipment Sales, Missoula ..........B17 Pure Bliss Cycle Sales, Conrad ................ A68, C42 R & L Seed & Machine LLC, Geyser ..................C32 Rainbow Irrigation & Equipment, Chinook .........C47 RDO Equipment, Billings .....................................A2 Reddig Equipment & Repair, Kalispell ...............C17 Rocky Mountain Outdoor Structures, Great FallsC41 Rocky Mountain Truck Sales, Great Falls ...........B14 Scenic City Trailer Sales, Belgrade ....................A56

Trader’s Dispatch, October 2012 — Page B1

SeedMaster........................................................A10 Seubert Insurance, Chester, Shelby ....................C2 Shobe Auction & United Country Realty, Lewistown .......................................................................A49 Shop Specialties, Ronan ....................................A26 Shortline Ag, Inc, Scobey..........................C46, C59 Sod Buster Sales, Polson.......................... A22, C30 Specialty Tool & Attachment, Cody WY..............C27 Steel Etc., LLP, Great Falls & Bozeman .............A31 Steinhatchee, Lance Nelson, Stevensville .........C48 Stock Drive Trailer Sales, Dillon .........................C15 Sullivan Brothers Construction, Conrad .............B13 Suppertime Stoves, Robert Troyer, Moore .........C38 Sunrise Equipment, Sidney ................................B15 Swains Spring Service, Great Falls........... A32, A48 T & T Farm Supply, LLC, Chester.......................C53 Tarzan Tree Trimming, LLP, Malta .......................A59 Taylor Farm Store, Shelby ..................................A45 The Gear House, Helena ...................................A66 The Repair Shop, Choteau ................................A23 The Truck Shop of Billings ....................................C6 Tiber Tractor Co., Chester ..................................C49 Tilleman Motor Company, Havre ........................A57 Tom’s Shop, Grassrange ....................................C34 Torgerson’s, Ethridge, Great Falls, Lewistown, Havre, Denton, Billings.....................................C18, C19 Transport Equipment, Missoula..........................C25 Treasure State Seed, Fairfield ............................A47 Trendline Vermeer Sales, Baker ................C32, C33 Tri-County Implement, Sidney ............................A29 Triangle Ag Service, Fort Benton ..............C43, C54 Triple C Trucking & Harvesting, Big Sandy ...........A8 Triple T Farm Services LLC, Laurel ....................C52 Triple T Sales, Chinook ......................................C39 Triple W Equipment, Kalispell, Missoula, Ronan C37 Vaughn Truck, Havre ................................. B13, C15 VW Mfg, Loren Hawks, Chester .........................C53 Wally’s Over Door Co., Great Falls .....................C26 Wesco Trailer Sales, Conrad ..............................A49 West Plains Implement, Beach, Dickinson, Bowman, Hettinger ........................................................A21 Western Montana New Holland, Missoula ...........C3 Wichman Ag Supply LLC, Hilger ...............C32, C33 Wild Horse Seed, Havre.....................................A43 Willy’s Petroleum, Billings...................................A36 Wilray Manufacturing, Fort Benton .....................A65 Woody’s Lumber & Sawmill, Helena ..................C40 World Equipment, Idaho Falls, ID.......................C45 Yellowstone Country Motors, Livingston...............B4 Yellowstone Tractor Co., Belgrade, Ronan .........A64 Zerbe Bros., Glasgow ................................... B8, B9 Zomer Truck, Conrad ................................... INSERT

Trader’s Dispatch, October 2012 — Page B2

The deadline for advertising in the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291.

FOR SALE

1994 John Deere 8970, triples, tires @ 35-40%, 5270 hours....................................................$87,500 obo Versatile 956 4WD, 12 speed powershift..$36,500 obo

1974 fire truck, 1200 gallon tank, 14,000 original miles........................................................$8500 obo

3-2002 Freightliner Cat C12 autoshift............. $26,500

1999 Chevrolet Tahoe $4500 obo 2001 Freightliner Detroit 60 Series autoshift.. $26,000 1998 Chevrolet Suburban $4250 obo 406-868-7258 Great Falls, MT area

Flexi-Coil 45-ft. air drill, 2320 tow behind cart..$55,000

MGGA Convention and Trade Show

Montana wheat and barley producers’ annual trek to Great Falls and the Montana Grain Growers Association Convention and Trade Show begins in December this year. “New Challenges, New Answers for Agriculture 2013” is scheduled for December 4-6, 2012 at the Best Western Heritage Inn. “You can always count on the annual MGGA convention bringing in top-notch speakers who will address agriculture’s most relevant issues, and this year is no different,” said Ryan McCormick, MGGA Vice-President and this year’s convention coordinator. “With attendance numbers over 800 in past years, the MGGA Convention is one of the largest agricultural gatherings in Montana.” Some of this year’s convention speakers include: Agri-Trend’s Agri-Coaches—Markus Braaten, Dan Wysocki, Mike Dolinski, Elston Solberg and Grant Jackson will share recommendations on how to maximize the yield potential of each farmer’s operation. Mike Wong, CGI, and Kevin Kaufman, BNSF will give their perspectives on state, national and international grain markets, emerging issues/trends, challenges/opportunities, evolving ag transportation issues and expansion of state and Pacific NW grain handling infrastructure. Greg Schwab, Koch Agronomic, has extensive experience in soil fertility and will address soil nitrogen management. Art Barnaby, KSU, is one of the nation’s foremost experts on crop insurance and his presentation will detail proposed new farm programs, how they relate to crop insurance and how producers can use them to protect their risk. Sara Wyant, AgriPulse editor and veteran farm policy reporter will update listeners on farm policy, commodity and conservation programs, trade, food safety, rural development and environmental and regulatory programs. Mark Gaede, National Association of Wheat Growers’ Director of Government Affairs for Environmental Policy will discuss several anticipated changes in conservation programs and environmental regulations. McCormick explained the value both sponsors and trade show exhibitors add to each MGGA convention saying, “Cutting edge agricultural innovations are showcased each year by over 75 trade show exhibitors and sponsors. And our trade show is all ag…everyone’s asked to leave their pots and pans at home for this one.” Wednesday evening’s trade show reception and wheat advocate auction offer a chance to relax and have some fun with other attendees and exhibitors while supporting MGGA’s state and national policy efforts. Cap off the event with the president’s banquet on Thursday evening in honor of outgoing MGGA President Brian Eggebrecht from Malta, MT and with entertainment from one of Montana’s own comics, Rich Brockman. “A key part of our convention is the resolutions process that sets MGGA policy direction for the next year and input from our membership is critical. Committee meetings are scheduled for Wednesday morning and the full resolution process will be completed on Thursday afternoon,” according to McCormick.” For more information or to register, visit www.mgga.org or contact the MGGA office at 406-761-4596.

Valencia orange tree

By Ron Smith, Horticulturist, NDSU Extension Service Q: I bought a dwarf Valencia orange tree about two months ago. Since then, it has not grown an inch. I had transplanted it into a 1-gallon pot and put it in the middle of my dining room table. A: You sound like an impatient person. A dwarf orange isn’t going to surge into new growth anytime soon. As long as the plant is healthy, with foliage remaining and a normal green color, you should be happy. When the plant has accumulated enough carbohydrate (photosynthates) energy to do so, it will produce some new growth. It may be that you have it in too low a light situation. If so, move it to where it can get some direct sunlight. If that isn’t possible, then provide artificial light from a plant light for 12-plus hours a day. During the next six to nine months, you should see some new growth taking place. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/ndsuag/lawns-gardenstrees.

What goes on inside the cells of corn and rice

Oregon State University (OSU) has been named a partner on a $10 million grant that aims to further the understanding of the molecular interactions and genes in crops that include rice and corn. Over the course of the next five years, OSU will receive about $2.9 million of the grant, which was awarded by the National Science Foundation. OSU will develop an online database, called a plant reactome, with information about the molecular and genetic interactions in the cells of corn, rice and Arabidopsis, a small flowering plant that’s used as a research model. It will also gather scientific literature on the three plants and add it to the database. The university will also study the role of growth hormones in the three plants. Additionally, OSU researchers will seek to better understand the genes that regulate photosynthesis in the plants as well as the yields in corn and rice when they’re stressed by mineral deficiencies, drought and salt. Three plants were selected because their reference genomes have been sequenced completely and share many similar genes with major commercial crops, said Pankaj Jaiswal, a plant biologist who is overseeing OSU’s part in the project. For example, rice and corn are related to wheat and barley. Likewise, Arabidopsis, a member of the mustard family, is similar to canola and sunflowers. The database that OSU puts together will become part of a larger online database known as Gramene (http://www. gramene.org) and is accessible to anyone. The research portal contains genetic information about various crops such as foxtail millet, grapes, poplar trees, sorghum, soybeans and tomatoes. As part of the $10 million grant, Cold Spring Harbor Laboratory in New York and other collaborators will add more genetic information about these crops to the Gramene database. With annotated and curated data online in one place, Gramene’s goal is to make it easier for plant breeders and other scientists to conduct their own research and gather support for their hypotheses. As a community outreach component of the project, OSU will organize workshops and webinars to teach scientists and students how to use Gramene. Jaiswal hopes that the research and sharing of knowledge will contribute toward the development of crops that yield more and resist diseases better. These improvements, he said, would ultimately benefit farmers and help feed the world’s growing population. Other partners in the grant include the Ontario Institute for Cancer Research, the European Bioinformatics Institute, and the American Society of Plant Biologists. More information on the grant is available from Cold Spring Harbor Laboratory (http://www.cshl.edu/ArticleWare/two-pioneering-plant-genomics-efforts-given-a-funding-boost-by-national-science-foundation) and the National Science Foundation (http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=1127112).

Knob weed

By Ron Smith, Horticulturist, NDSU Extension Service Q: How does one control or get rid of the knob weed that infests my lawn almost every summer? I have pulled a lot of it, but I’m losing ground. How does it regenerate? The roots are a foot long on the plants that I have pulled out. Is there a spray that I could use? I know you have said that they grow in compacted areas, but I find them all over. A: This very persistent weed is difficult to control once it gets a foothold. It is most vulnerable at the young seedling stage. You can use a broadleaf herbicide shortly after emergence. Any that are listed for control of dandelions or plantain will do the job. Because of the very high seed production, repeat applications may be necessary. Additionally, good cultural practices will help squelch this weed. This includes overcoming compaction with core aeration on a regular basis, maintaining good fertility to keep the grass growing vigorously, and accepting the fact that compaction is bound to exist no matter what tactic you attempt. You also could make the compacted area a nonliving surface of sidewalk or walking path. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page B3

8155 Hwy. 10 West Missoula, Montana 406-544-2940 or 406-829-3540 E-mail: neilm@lm-machinery.com

Cat 416B 4x4 backhoe with cab and ‘E’ stick....................$22,500

1997 Ford 2000-gallon water truck with front/side/rear spray. Very nice condition.................$29,500

Cat D5H crawler with cab, 6 way dozer and rippers. Excellent........ ......................................$49,500

International line truck with auger and front winch..............$12,500 Case 580D 2x4 backhoe, ‘E’ stick..... ......................................$11,500

1997 Moxie MT30 new engine........ .................................... RENTAL

Case 850D six way dozer, rippers... ..................................... $19,500

1997 International 4700 single axle dump with DT466 and hydraulic brakes............... $17,500 Cat 140G with rippers........ $70,000

2005 Ford 550 4x4 bucket truck....... ......................................$13,500 Cat 12E SN 99E05546, scarifier...... ..................................... $13,500

2007 Toyota 5000 lb. propane forklift.................................. $19,500

Complete fire command station and generator.........................$59,000

Cat 930 ex county...............$29,500

2005 Cat 938G.................. $82,900

1999 Case 9010 excavator with hydraulic thumb.................$32,500

2010 Takeuchi TB153 excavator, blade, rubber tracks, 250 hours.. ......................................$59,000

1998 Barko 130 self loader............. ..................................... $13,500

Peerless 45-ft. 3-axle chip trailer....... ...........................................$8500

2007 Kobelco 135SRLC hydraulic thumb .............................$74,900 Farmall M with back blade and 3-point...............................$2950

15 Ton Trailers air brakes and ramps. YOUR CHOICE............................ $9950

Log loaders available

LM Rents * Flexible terms: pick up and delivery * Compactors padfoot and smooth drum: 54” to 84” * Excavators: from 10 ton to 30 ton

* Dozers six way blades and rippers: D4 to D8 size * Wheel loaders: 2 yard to 7 yard * Articulated trucks: 25 and 30 ton

Trader’s Dispatch, October 2012 — Page B4

The deadline for phoning in advertising for the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291.

AUGERS

Used Grain Augers

Westfield 71-ft. x 13”, low profile hopper. Two seasons of use............................ $13,800 Mayrath/Hutchinson 62-ft. x 10”, PTO drive, Westfield 71-ft. x 13”, mechanical drive. Great electric winch.................................. $2750 buy.................................................. $8500 Westfield 61-ft. x 10” mechanical low profile Farm King 71-ft. x 10” mechanical drive. hopper, sharp.................................. $6500 Consigned....................................... $4500 Westgo 60-ft. x 10”, hanger bearings, swing hopper............................................. $2500 Mayrath 56-ft. x 8”, PTO. For parts........ $350

“I have a large selection of Ford auto parts from years 1960 to 2000. This is inventory from Power Motors’ many years as a Ford dealer. Call or e-mail with a part number. We do not have access to a system that identifies what a particular part on the shelf will fit. George Fultz

KRAUSE PARTS On Hand

Power Motors Implement - Fort Benton George Fultz (406) 799-7459 H gfultz49@gmail.com

Overwatering spruce trees?

By Ron Smith, Horticulturist, NDSU Extension Service Q: I read with keen interest your responses to the questions about spruce trees, so I thought you could help us with a spruce issue. We have a cabin in a spot that is very sunny and generally dry during the summer months. In front, there is a long, tall, man-made mound. The soil in the mound is somewhat rocky but of reasonably good quality and it drains well. We planted some blue and Colorado spruce trees four years ago for screening and installed a drip irrigation system. Since then, we have replaced several of the spruce because many turned yellow, then brown, and died. Several of the trees still have a yellow cast, so early this June, we began ramping up the irrigation rate. We now irrigate every night for 10 hours, giving each tree a total of about 1 to 2 gallons per minute at two points of the drip line. They seem to be improving and are putting on new growth. My concern is that we are watering too much. No water pools on the mound because it drains easily into the soil on the mound. Also, what’s the prognosis for these trees? Are we going to have to water them forever? (Lake City, Colorado) A: Well, they won’t win any beauty contest. Keep in mind that the roots will follow the percolating water through the soil (or stone) profile. Eventually, the roots should reach a site where there is a reservoir of moisture sufficient enough to sustain these trees through normal rain cycles. After this growing season, they should be able to grow and thrive on a heck of a lot less water than you are presently supplying. You are growing them hydroponically at this point, so they need to be weaned gradually through the remainder of the summer to less and less water. At most, you can soak the trees two to three times a week for three to four hours at a time. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/ndsuag/lawnsgardens-trees.

SPECIAL FACTORY PRICING FOR BUSINESSES

2012 Dodge 3500 4x4 Diesel “Order In Special”

$38,616 * See dealer for details

Trader’s Dispatch, October 2012 — Page B5

HUGGY BEAR’S CONSIGNMENT & APPRAISAL Phone 406-873-4819, cell 229-0662, e-mail khbear59427@yahoo.com, Cut Bank, Montana

Website: www.huggybearsconsignments.com

LAST MONTH’S NEW ITEMS

“If You Want To Sell or Buy...Huggy Bear Is Your Guy”.

Quick Clean 772 grain cleaner, used very little. Tag #BRichert0912..........$7000 1987 Case IH 2188 combine with 1042 36-ft. draper header and 13-ft. 1010 pickup header. Tag #LarryK0912........................................................$86,000 John Deere 105 combine with 22-ft. header and 13-ft. pickup header. This is the last 105 model made. Tag #RWinko0912..............................................$3500 John Deere 105 combine with 22-ft. header. Tag #MikeMc0912.................$3500 Allis-Chalmers N6 combine. Tag #CDy0912..............................................$8500 Allis-Chalmers R60 combine. Tag #CDy0912. John Deere 95 combine with 20-ft. header, pickup reel. Tag #Len0912. John Deere 7700 gas combine with 224 header. Tag #AHan0912.............$3500 John Deere 7700 diesel combine with 24-ft. header. Tag #RKra0912. Gravel for sale. Tag #GunsightGR0912. Ford 8N tractor with 3-point, 540 PTO. Tag #RWinko0912..........................$2900 Allis-Chalmers WD45 tractor, 3-point, 540 PTO. Tag #RWinko0912..........$2900 Versatile 400 swather with 20-ft. DSA header. Tag #RWinko0912..............$4000 1990 Flexi-Coil System 65 sprayer, single 16.5x16.1 tires, wind screens, mixer tank. Tag #PhilA0912. 1980 John Deere 1610 45-ft. plow with 11/4” shanks and Honey Bee Rod. 1970 Gysler 24-ft. plow with cable lift. Tag #HerbK0912. 1982 Valmar 240 hydraulic drive, on homemade cart. Tag #HerbK0912. 1000 gallon fuel tank. Tag #PatHig0912........................................................$750 New Holland 1425 self-propelled baler. Tag #LarryK0912..........................$6500 New Holland 1047 self-propelled bale wagon. Tag #LarryK0912...............$6500 White Iseki 31 tractor, MFD, Quick Attach 1045 loader, 540 PTO, 1271 hours. Tag #RodC0912. 1.5 KW generator, Kubota engine, 120/240/480 volts. Tag #ALD0912..$13,500 Kelly 50 3-point hitch backhoe attachment, 8-ft. reach, 2 buckets. Tag #RickK0912...........................................................................................$5000 Allis-Chalmers D17 tractor, loader, 3-point, 540 PTO. Tag #RickK0912...$6500 Housky 6000 gallon glass lined tank. Tag #HLake0912...........................$25,000 1998 New Holland 8260 MFD tractor, 7314 loader/grapple, powershift, dual PTO, 3-point, good tires, 13,800 hours. Tag #HLake0912. 2000 John Deere 7610 MFD tractor with 7740 loader, 3-point, dual PTO, powershift, 5300 hours. Tag #PaulB0912.....................................................$79,000 2-John Deere 914 pickup headers w/attachments. Tag #PaulB0912.$4500 ea 1971 Kenworth conventional with 22-ft. box and hoist, tandem axle, roll tarp. TimF0912...........................................................................................$20,000 1972 Ford 880 truck with 22-ft. Knapheide box, roll tarp, Browning transmission, tandem axle, 37,000 miles. Tag #TimF0912.......................................$13,000 Alloway 20-ft. flail shredder. Tag #PatW0912...........................................$12,000 New Holland 772 triple delivery, 30-ft. header, low hours. Tag #PatW0912.......... . .........................................................................................................$22,000 New Holland Super 1049 bale wagon with auto tie, Ford gas engine, hauls 160 bales. Tag #BerthaJ0912. 1976 Versatile 400 swather with 20-ft. DSA header. Tag #BerthaJ0912. International 806 2WD tractor with 540 PTO, good auger tractor. Tag #BerthaJ0912. International 160 grain truck with 14-ft. grain box. Tag #BerthaJ0912. Dodge grain truck with 14-ft. grain box. Tag #BerthaJ0912. 1974 Chevrolet 2WD pickup truck. Tag #HWall0912. Chevrolet Celebrity 2WD car. Tag #HWal0912. Danuser F8 post hole auger. Tag #LTorg0912. 1964 International 806 tractor with Farmhand loader, Excel cab, new water pump, rebuilt radiator. Tag #DarrenH0912.............................................$6000 Ford 8000 2WD tractor, 3-point, 540 PTO tractor. Tag #ZachM0912..........$8000 2008 Kawasaki Vulcan motorcycle, 1828 miles. Tag #TomA0912..............$6500 Graham Hoeme 14-ft. plow. Tag #Hug0912..................................................$950 Fuel stand. Tag #Hug0912.............................................................................$100 Speed King 6”x36-ft. PTO auger. Tag #Hug0912..........................................$750 50 bushel pig feeder. Tag #Hug0912..............................................................$150 Massey-Ferguson 880 8-bottom moldboard plow in excellent condition. Tag #Hug0912.............................................................................................$6500 PTO water pump. Tag #Hug0912...................................................................$500 Century sprayer. Tag #Hug0912....................................................................$200 2-Massey-Ferguson 1135 2WD tractors with 1000 PTO, 3-point hitch and cabs. Tag #ReidH0912. 2-1977-79 Wilson grain trailers & 20-ft. pumps. Tag #ReidH0912.$25,000 ea Versatile 800 tractor with 36-ft. Ford disc. Tag #RossD0912. 1992 Chevrolet 2WD regular cab pickup, automatic. Tag #Chet0912. John Deere 890 14-ft. hay header to fit on JD 4890 swather. Tag #HLake0912. 2-Wascomat Junior 74 stainless steel clothes washer. Tag #GlacierC0912. John Deere 950 MFD tractor, loader, 3-point, 540 PTO. Tag #Moodie0912.

BACKHOES, LOADERS, SKID STEERS CRAWLERS & EXCAVATORS

2-Cat 627B scrapers. Tag #JamieF0812 JCB 214S tractor/loader/backhoe, front wheel drive.Tag #DonnaH0812....$20,000 Case 450 dozer. Tag #TimS0812. Trencher for sale. Tag #TimS0812. Allis-Chalmers HD 15 crawler, reconditioned. Tag #DickU0812..............$10,000 1998 Caterpillar D8R U dozer, 4 place ripper. Tag #RilD0712...............$225,000 1996 Caterpillar D6XL dozer, U blade, cab, rollover cage, ripper. Tag #RilD0712..........................................................................................$75,000 1985 Caterpillar 140G grader, new tires. Tag #RilD0712.........................$95,000 Linderman crawler. Tag #ANF0412............................................................$9000 Drott wheel excavator. Tag #DavidA0412 Caterpillar D8 14A angle dozer, 10-ft. cable. Tag #Smesr0312 Allis-Chalmers HD 15 crawler, reconditioned. Tag #DickU0811..............$15,000 International E200 13-yard self-propelled paddle wheel scraper. Tag #Jfuson0708.............................................................................................$17,000 1969 Terex T3 scraper. Tag #EDickU0510................................................$15,000 1982 Drott 40B wheel excavator. Tag #DaveA0512 Skid steer work or rental. Tag #Chad0611 Case 1150B crawler/loader with 4-in-1 bucket, good undercarriage, pins and rollers turned, pads are good. Tag #Ahan..........................................$16,000 Case 450 dozer. Tag #TimS0811 New Holland L775 skid steer loader, diesel engine. Tag #RichT0112........$8800 Allis Chalmers HD 5 crawler tractor, 2 cylinder Detroit diesel, bucket, blade. Tag #MGoss0212.........................................................................................$4000 International TD 14A crawler, 10-ft. blade, manual angle. Tag #HarveyK0212 Airman HM 305 4000 lb. excavator. Tag#Pack0611.................................$11,000

New Wheatheart augers Several sizes of used grain augers

EQUIPMENT & PRODUCTS AVAILABLE

• Supreme Mixers, new and used • Ezee-On post drivers. • Ezee-On air seeders with special discounts. • Keho and Edwards aeration equipment. • Tausras salt supplements. • Many more products can be obtained. • Call me for your parts needs for any make.

DIGITAL PICTURES AVAILABLE ON REQUEST

TRAILERS

1967 Fruehauf 21-ft. trailer. Tag #Jess0812.............................................$12,000 Miller tandem axle heavy duty trailer, new deck, pintle hitch. Good backhoe trailer. Tag #HugB0812..........................................................................$6500 2010 PJ 8-ft. pickup flatbed. Tag #Colie1210 2012 PJ 26-ft. tandem axle flatbed gooseneck trailer. Tag #Hug0412.........$7800 2012 PJ dump trailer. Tag #Hug0412...........................................................$8100 New Travalong trailers. Tag #CBass0212 20-ft. flatbed trailer with cattle rack. Tag #DarylG0811 16-ft. flatbed trailer, good for hauling hay. Tag #JHug1011.............................$550

2WD & 4WD TRACTORS

John Deere 720 diesel tractor. Tag #ANF0812. John Deere 720 diesel standard tractor. Tag #ANF0812. 1999 New Holland TV 140 bidirectional tractor with PTO on both ends, New Holland 82L loader, 3000 hours, nice machine. Tag #GO0812..........$65,000 Case 2390 tractor with 1000 PTO, 3-point hitch. Tag #GO0812...............$14,000 2008 Case IH 485 tractor, 710x42 tires 75%-80%, powershift, mega flow. Tag #KA0812..........................................................................................$210,000 John Deere 8850 (fire damaged) tractor, 1000 PTO, almost new transmission and engine are good. Tag #RobW0812. Case 580 tractor, 2WD, loader, backhoe. Tag #LMM0712........................$15,000 John Deere A tractor. Tag #ANF0712.........................................................$5000 John Deere 80 tractor. Tag #ANF0712........................................................$8000 Case 1030 tractor, 540 PTO. Tag #TomH0712............................................$4500 Case 1070 2WD tractor, PTO. Tag #Tom H0712 Case 2290 2WD tractor, loader and grapple, 6832 hours, add-on 3 point hitch. Tag #MikeL0712 1964 John Deere 4020 tractor, 148 loader/grapple, PTO, no 3 point. Tag #ToddS0712 Massey Ferguson 2745 2WD tractor, 1000 PTO, duals, no 3 point. Tag #DKraft0712 1996 JCB backhoe 4WD, 7676 hours. Tag #DH0712...............................$25,000 Allis Chalmers 170 2WD tractor, gas, Farmhand F11 loader, 3 point, 540 PTO, 6-ft. Worksaver rear blade. John Deere 4020 tractor, 148 loader. Tag #ToddSm0612 Massey 1150 tractor, PTO. Tag #ANF0612 John Deere 4020 tractor, cab, loader, no PTO, runs great, good loader tractor. Tag #ANF0612......................................................................................$8500 Massey Ferguson 35 tractor, Davis loader. Tag #Aber0512.......................$5500 John Deere 7020 4WD tractor, 1000 PTO, duals with 4 of them new. Tag #MGoss0512.........................................................................................$6900 John Deere 8400 track tractor, 3 point, 1000 PTO, Green Star ready. Tag #BarryH0512 Versatile 935 4WD tractor, pump set at 365 hp, 903 engine, new tires. Tag #PatW0512........................................................................................$29,000 John Deere 4020 tractor, 58 loader, no PTO. Tag #ANF0512.....................$7500 1950 Oliver with an extra junk 1950 Oliver for parts. Tag #DickU0811. Both..$8000 Case 1030 tractor, cab, 540 PTO. Tag #ArtH0212.......................................$3800 1975 John Deere 5510N tractor, 2WD, 75 hp, 3 point, 540 PTO, 5465 hours. Tag #RichT0112........................................................................................$11,500 John Deere 4960 FWD tractor, 1000 PTO, 3 point, only 120 hours on engine overhaul, no loader. Tag #ANF0412...................................................$58,000 Versatile 800 tractor, 18.4x38 duals, 5000 hours. Tag #JBurris0112.......$23,000 2009 Case IH Puma tractor, loader. Tag #LarryK0112...........................$133,000 1975 International 4366 4WD tractor. Tag #LarryK0112............................$6500 John Deere 7520 4WD tractor, 1000 PTO, 2 remotes. Tag #ANF0412.......$9500 1988 Versatile 976 20.8x42 duals, 5300 hours. Tag #PChris0412 Minneapolis-Moline 704 FWD tractor. Tag #ANF0412...............................$4500 Minneapolis-Moline 706 FWD tractor. Tag #ANF0412...............................$4500 2009 Case IH 105U Farmall tractor, 105 hp, front wheel assist, 3 point, PTO, only 900 hours. Tag #Hug0412...........................................................$48,000 John Deere 4960 FWD tractor, 1000 PTO, 3 point hitch. Tag #ANF0412.$59,000 Massey-Ferguson 1150 2WD tractor, 540 PTO, no 3 point or loader. Tag #ANF0412.............................................................................................$5500 Case 310 tractor, new paint, 3 point, 540 PTO, power steering, excellent shape. Tag #DMclean0412...............................................................................$6500 Massey-Ferguson 1155 2WD tractor, 540 PTO, cab, 24.5x32 tires, Westendorf loader, grapple fork, 5000 hours. Tag #ArtH0212..................................$8900 2007 Jinma 28hp tractor, MFD, loader, low hours. Tag #Ivan0112..............$8000 Oliver 1265 2WD tractor, 3 point, diesel, 540 PTO. Tag #Larryk0112.........$4500 Oliver Super 550 tractor, 3 point, 540 PTO. Tag #Vernk1211 1979 Allis-Chalmers 8550 4WD tractor with PTO. Tag#DickU0510........$15,000 Massey-Ferguson 35 tractor with Davis loader. Tag #Aber0511................$5500 Versatile 935 tractor, 903 Cummins, 365 hp. Tag #PatW0412 Jackson 534 4WD tractor. Tag #0811 Versatile 145 4WD tractor. Tag #MonteF0811............................................$4500 1975 John Deere 5500N tractor, 73 hp, 4WD, 3 point, 540 PTO, 8033 hours. Tag #Richt0112.........................................................................................$15,000 Steiger Lion LKL 4WD tractor, 30.5x32 tires, 8088 hours, nice tractor. Tag #Larry0112.........................................................................................$55,000 International 140 tractor. Tag #Toby1111 John Deere 8850 tractor, fire damaged, 1000 PTO, almost new tires, transmission and engine are good. Tag #RobW0811......................................$35,000 Ford 9N tractor, 3 point, 540 PTO. Tag #RWinko0811.................................$3500 1974 Allis-Chalmers 440 4WD tractor. Tag #DickU0510.........................$22,000

Call Ken for grain carts. SPRAYERS

3-CompuSpray sprayers. 1 is good and 2 for parts. Tag #BMun0812. 2010 Summers sprayer, 60-ft. booms, 500 gallon tank, triple nozzles, on a 2001 Ford F250 pickup. Tag #Trever0712...................................................$27,500 1997 Flexi-Coil System 65 sprayer, 100-ft. booms, 1000 gallon tank, 3 way nozzle bodies. Tag #Joe0412 Flexi-coil System 65 90-ft. field sprayer. Tag #LarryK0112........................$7500 3-ComputerSpray sprayers. 1 is good and 2 for parts. Tag #BMun0811 1990 Flexi-Coil System 65 sprayer, single 16.5x16.1 tires, windscreens, mixer tank. Tag #PhilA0911 Model A 27000 Big A sprayer, ready to go to work. Tag #JR0511..........$22,000 1996 ComputerSpray sprayer with updates, sprays on 12” centers, 60-ft. booms. Tag #KDanger0411......................................................................$3500 1993 Ford F350 pickup with Field Commander sprayer, 500 gallon tank, new hydraulic pump, new water pump kit. Tag #MSuta0211.....................$12,000

TUB GRINDERS & PROCESSORS

Haybuster 2640 bale processor. Tag #BrenB0812. New Holland 175 round baler feeder. Tag #JoeM0612...............................$4500 Hesston BP 25 bale processor, always shedded. Tag #Simmes0212........$3500 Haybuster 2640 bale processor. Tag #BrenB0811 New Holland 354 grinder mixer. Tag #RogW0512 Supreme Mixers available. Call Huggy Bear. New Holland 352 grinder mixer. Tag #LarryK0112.....................................$2500

PLOWS

John Deere 1600 41-ft. plow. Tag #MarvinG0812.......................................$3500 John Deere 1600 33-ft. plow. Tag #MarvinG0812.......................................$3500 Edwards 18-ft. plow, Morris mounted harrow. Tag #MonteF0812................$1600 Renn 5505 31-ft. plow, 11/4” shanks, setup for hydraulics, good condition. Tag #whjar0712...........................................................................................$9500 Gysler 42-ft. plow. Tag #GregC0612............................................................$4500 Melroe 505 24-ft. chisel plow, with Morris harrow. Tag #Larryk0112...........$6000 Melroe 912 4-bottom plow, new standards 100 acres ago. Tag #DeanK1209.

Several rakes, mowers, bale movers.

NEW ITEMS See me for your Bale Processor needs 16-ft flatbed trailer, good for hauling hay. Tag #JHug1012....................... $550 45x90 shop and office for sale or rent in Cut Bank. Tag #RTrent1012.......Call Graham Hoeme 14-ft plow. Tag #THall1012......................................... $1500 Herd grass seeder, 3-point hitch. Tag #RMar1012 Winch for Cat D6C with Hyster free spooler. Tag #Pack1012. Sullair compressor tank. Tag #Hug1012............................................ $25,000 1992 Hesston 8100 swather, 30-ft DSA header with pickup header. Tag #HerbK1012................................................................................. $31,000 Case RBX562 round baler, new wrap, low bale count. Tag #NorthF1012....... . ................................................................................................... $28,000 New Holland 570 pto square baler in good shape. Tag #Hug10912..... $4500 New Holland Super 1049 bale wagon. Tag #KevinM1012................. $18,500 New Holland 1116 swather with 14-ft header. Tag #RayM1012 New AerWay 30-ft aerator. Tag #RickW1012..................................... $50,000 AerWay 20-ft aerator. Tag #RickW1012.............................................. $33,000 2-Allis Chalmers N6 combines with 27-ft headers. Tag #DickU1012............. . .............................................................................................. $22,500 ea Case 930 tractor with 540 PTO. Tag #MarvinG1012. . .......................... $2000 John Deere R tractor with 540 PTO. Tag #MarvinG1012. .................... $2000 Case 630 tractor, 3-point, 540 PTO, 3-point blade. Tag #MarvinG1012...$3500 Massey Ferguson 97 tractor. Tag #MarvinG1012. . ............................. $1900 Frontier 5-ft cultivator with spring shanks. Tag #HerbK1012 8-ft antique manual lever depth control. Tag #HerbK1012 2007 Case IH ATX 70-ft air seeder, narrow fold, 12” spacing, 430 tow between cart, steel packers, stealth openers. Tag #KA1012.......... $120,000 New Spray Lift hydraulic jack for big clearance sprayers. Tag #BigS1012...... . ...................................................................................................... $2700 John Deere 9400 4x4 tractor, 3 remotes. Tag #Rog1012................ $110,000 1974 White Freightliner cabover, 350 Cummins, 5th wheel, good tires, new batteries. Tag #BranM1012............................................................. .$5500 Versatile 145 for parts. Tag #Bett1012.................................................. $1500 Minneapolis Moline 705 tractor with loader. Tag #Bett1012................. $2000 1975 Steiger Cougar II 4x4 tractor. Tag #Bett1012.............................. $8500 1981 Steiger PTA-325 Panther tractor. Tag #Bett1012....................... $13,500 2002 Flexi-coil 67XL trailer type sprayer. Tag #Bett1012................... $17,000 1998 Case IH 1680 combine, 1010 30-ft header. Tag #Bett1012....... $25,000 Westfield MK130 13”x61-ft swing hopper auger. Tag #Bett1012.......... $8500 Westfield TR 8”x61-ft swing hopper grain auger. Tag #Bett1012.......... $3000 Mayrath 12”x10-ft transfer auger with electric motor. Tag #Bett1012...... $950 Flexi-coil 49-ft plow with Degelman mounted harrows. Tag #Bett1012.$5500 Versatile drills, 56-ft, set of 7 8-ft sections, steel packers. Tag #Bett1012....... . ...................................................................................................... $8500 Versatile drills, 56-ft, for parts. Tag #Bett1012....................................... $2500 1991 Wabash 30-ft dry van trailer, used for spray chemicals. Tag #Bett1012.. . ...................................................................................................... $6500 Robin loader off a Minneapolis Moline tractor. Tag #Bett1012................ $300 24-ft grain trailer. Tag #Bett1012............................................................ $5500 20-ft grain pup trailer. Tag #Bett1012..................................................... $3500 PowerMac 4000 generator, 8-hp Briggs engine. Tag #Brett1012............ $500 Honda Big Red 3 wheeler. Tag #Bett1012.............................................. $700 International L190 truck without engine. Tag #Bett1012........................ $300 1995 Ford F250 pickup, Power Stroke, extended cab. Tag #Bett1012.. $6000 1951 Ford F3 3/4 ton pickup. Tag #Bett1012.......................................... $2500 1983 Ford F800 truck with storage box. Tag #Bett1012........................ $6000 White Freightliner truck, Detroit engine. Tag #Bett1012...................... $5500 1967 Ford grain truck with 16-ft grain box. Tag #Bett1012.................... $3800 John Deere 3010 2WD tractor, loader, 3-point, 540 PTO. Tag #ANF1012...... . ...................................................................................................... $7500 John Deere drills, 40-ft set, 12” spacing. Tag #Zen1012.................... $13,000 Farm King 505 tandem disk, 6-ft, used very little. Tag #JR1012........... $1000 Bush Hog RM 7-ft, 3-point rear blade. Tag #JR1012............................ $1050 John Deere 7-ft rear blade. Tag #ANF1012........................................... $1000 2010 John Deere 9770 combine with big singles, GS 111 mapping, AutoSteer, with 640D draper header, pickup reel, transport, 600 engine hours and 450 separator hours. Tag #KA0812..................................... $335,000 Wilray 20-ft. gooseneck flatbed trailer. Tag #Hug1012.......................... $2950 Miller 24-ft. pintle hitch, tandem dually equipment trailer.Tag #Hug1012.$6500 16-ft. bumper pull car hauler. Tag #Hug1012......................................... $2500 Military 6x6 truck. Tag #Mikel1012.............................................................Call Woodstove. Tag #Mikel1012.................................................................... $700 1990 Ford 555C 2WD tractor/loader/backhoe. Tag #Hug1012........... $12,500 John Deere 5010/20 1000 PTO, cab, low hours. Older rock picker. John Deere 106 24-ft. plow with mounted harrow. 12-ft. rod weeder. John Deere 20-ft. oneway. Crust Buster 36-ft. Vibra shank cultivator. Noble 8-ft. straight blade plow. Graham Hoeme 14-ft. plow. Tag #BillB1012

PACKAGE PRICE $8500 TRUCKS

1955 Reo grain truck. Tag #Brandt0812. 1980 Chevrolet 11/2-ton dump truck, 10-yard box and hoist. Tag #DaveB0812. 1980 Chevrolet dump truck with 10 yard gravel box and hoist. Tag #DBos0612 1957 International truck, heavy duty box, 14-ft. with high sides. Tag #PaulT0512 1952 Chevrolet 2 ton truck, 14-ft. grain box. Tag #PaulT0512 2004 Kenworth T800. Tag #PatW0412....................................................$40,000 2002 Kenworth T800. Tag #PatW0412....................................................$30,000 Mack cabover tandem axle truck, 20-ft. box and hoist, no power steering. Tag #MarvinG0212......................................................................................$6500 Ford F750 truck, PTO water pump, 2000 gallon water tank. Tag #M&M0512....... . ............................................................................................................$2500

ANTIQUE TRACTORS

MM U tractor with parts. Tag #DickU0812....................................................$1000 Oliver 1950 and junk 1950. Both for sale. Tag #DickU0812........................$8000 1950 Oliver tractor, Detroit diesel. Tag #DickU0511....................................$7500 Minneapolis-Moline GB gas tractor. Tag #Mgoss0111 Minneapolis-Moline GBD with cab. Tag #Mgoss0111 John Deere 50 with wide front. Tag #Mgoss0111 Oliver 550 2 wheel tractor, 3 point, 540 PTO, 1 set of remotes. Tag #Kramer0711...................................................................................................$3500

DISCS

John Deere MK-10 12-ft. disc. Tag #ToddS0712.........................................$4500 12-ft. disc. Tag #ScottO0512 Hesston 2410 60-ft. disc, 24” discs, good for CRP breaking. Tag #CliffB0512 Glenco 12-ft. cultivator. Tag #ScottO0512...................................................$1800 3 point hitch offset disc. Tag #RTrent0312.....................................................$950 Ford 36-ft. disc, 20” pans. Tag #JimB0112..................................................$7500

AIR SEEDERS & DRILLS

2-International 7100 drill, 12-ft., 10” spacing, fertilizer and grain box, steel packers. Tag #TomP0512 50-ft. of John Deere 9350 drills on Apollo hitch, 10” spacing. Tag #BMun0812. 2-International 620 double disc drills, 7” spacing, steel packers. Tag #DPark0412.................................................................................$2800 each John Deere 9450 drill, 30-ft., 10” spacing steel packers. Tag #ANF0412....$9500 Concord 4012 air seeder, 1502 engine driven air tank.Tag #AHans0412...$20,000 John Deere 9350 drills, 50-ft., Apollo hitch, 10” spacing. Tag #BMun0811 Concord 4012 40-ft. air drill, 3000 gallon tank, hydraulic drive, rice tires, was 56-ft. Tag #LarryK0711.......................................................................$30,000 1976 John Deere 9350 40-ft. drills with rubber packers, AcraPoints. Tag #DickU0511..............................................................................................$5000 1979 John Deere 9350 40-ft. drills with packer wheels and AcraPoints. Tag #DickU0511..............................................................................................$5000 50-ft. of John Deere 9350 drills on Apollo hitch, 10” spacing. Tag #BMun0810 International 7100 10-ft drills, 10” spacing. Tag #Deank1211

Trader’s Dispatch, October 2012 — Page B6

Spider identification and management

By Gary L Jensen, Will Lanier, Extension Integrated Pest Management Specialist (retired), and Catherine E. Seibert, Insect Diagnostician, and Herbarium Collection Manager and Extension Plant Taxonomist, Montana State University. All drawings by Catherine E. Seibert.

Many people fear spiders more than household insects like ants, cockroaches, crickets, and other common arthropods. This fear often is caused by a lack of information about or experience with spiders. A report by television, radio or newspaper that a person has been bitten by a black widow or a brown recluse spider often triggers a flood of queries. People call or submit samples to county agents, health departments or extension specialists requesting information about these creatures. For example, in spite of all the publicity it has been given, the brown recluse spider is not yet known to inhabit Montana, yet bites by other spiders are often misdiagnosed as brown recluse bites. And while black widow spiders are common in Montana, much of the fear concerning them is not warranted despite their unsavory reputation. County agents and health officials can do a better job of dispelling fears about spiders if they have some knowledge about spider identification and biology. Spiders contrasted to insects Spiders differ from insects in several respects. They have four pairs of legs, no antennae, no wings, and only two body regions. The head and thorax are combined and called the cephalothorax. The cephalothorax is attached by a narrow pedicel to an unsegmented abdomen. The abdomen has spinnerets at the posterior end, from which silk for spider webs is spun. By contrast, all adult insects have three pairs of legs, one pair of antennae, and three body regions: head, thorax and segmented abdomen which has no spinnerets. Many adult insects have one or two pairs of wings. All spiders are predators and will eat one another. A few will also scavenge. They are numerous and probably play a useful role in keeping insects and other arthropods in check. Insects, on the other hand, feed on nearly anything organic: plants, animals, wood, garbage, stored products, etc. Some insects are highly beneficial, others are pests, and others are neither. Spider biology Female spiders are usually larger than males and have a pair of appendages on the head called pedipalps that resemble legs. After mating, female spiders spin silken egg sacs in which they lay masses of eggs. After some time, young spiderlings hatch and emerge from the egg sac. They grow by periodically molting or shedding old skin. Spiderlings molt from four to twelve times before reaching the adult stage. Young spiders resemble adults, living and feeding in the same environment. Spiders catch and feed on many kinds of insects and other arthropods. Spider mouth parts are quite different from insect mouth parts. They have a pair of pincers, called chelicerae, which have openings at the tips connected to ducts leading from poison glands. While all spiders have poison glands, only a few are poisonous to humans. When spiders capture prey, their bite injects venom and digestive fluids, paralyzing their victim. While the prey is immobilized, the spider sucks out the liquefied, digested tissues, leaving only an empty shell. Other spiders crush the body of their prey, bathe the tissues with digestive fluid, suck up the digested liquid, and continue chewing and rolling the body until only a little ball of indigestible material remains. Spider identification About 50,000 species of spiders have been described. While one person is not able to identify all spiders, county agents, health officials and others can easily learn to identify important spiders, just as people learn to recognize poisonous snakes and poisonous plants. The only truly poisonous spiders in Montana are the black widow, a very docile, non-aggres-

sive spider, (unless the female is protecting the egg sac), and the aggressive house spider. Even though the brown recluse spider has not been found in Montana, county agents and others should be familiar with certain distinguishing characteristics so that they can quickly eliminate it when spiders are brought to them for identification. Spider families are easily identified by the position and number of eyes, the overall shape, length of legs and form of the spinnerets. If a person is bitten by a spider and has reason to seek medical attention, it is important to have a specimen of the suspect spider to aid in identification. Spiders around the home are found around windows, screens and especially around outside lights, where insect prey are attracted. The first step in identifying a spider is to determine if it is associated with a web. This MontGuide provides a pictorial guide for determining some important common species and families using conspicuous characteristics. Web Spinning Spiders Black widow spiders

The black widow spider and its relatives in the genus Latrodectus are easily recognized by the hourglass marking on the underside of the abdomen. (See illustration on this page.) This marking is reddish or orange on live specimens, but loses its color when preserved in alcohol. Black widow spiders get their name from the fact that the female frequently eats the male after mating, a practice not uncommon to several other species of spiders. There are probably at least two species of black widow spiders in Montana the northern black widow, Latrodectus variolus, and the western black widow, Latro-dectus hesperus. They are distinguishable by their color markings. The western black widow female’s body is about half an inch long and the male is less than half this size. Females have a complete hourglass marking on the underside of the abdomen, which is usually completely black except for a small reddish spot near the tip. Males of the western black widow are usually light brown whereas males of the other species of Latrodectus are generally black. Males have three diagonal pale stripes on each side of the abdomen. The northern black widow spider is similar to

the western black widow except the hourglass marking on the underside of the abdomen is incomplete or split into two triangles. The abdomen of the female is black with a row of reddish spots along the top and diagonal whitish bands on each side. Males have four diagonal whitish bands on each side of the abdomen. The bite of both the western and northern black widow is a neurotoxin and is very painful. The pain occurs less at the actual bite but rather in the abdomen and limbs. Physiological effects are an accelerated heart beat, increased blood pressure, breathing difficulties, and paralysis. When death occurs, it is due to suffocation. Although the bite of a black widow is rarely fatal it is important to seek medical attention. Antidotes are commercially available. Family Theridiidae: House or Comb-footed Spiders Medium to small sized, glossy spiders with globular abdomens, thin legs bearing few spines, and eight relatively large, protuberant eyes. House spiders, except for the “widows,” have two of the lateral eyes touching each other on each side and well separated from the other four. Latrodectus hesperus Western Black Widow

Steatoda sp., House Spider

Latrodectus variolus Northern Black Widow Redrawn from Levi and Levi, 1968 House spiders House spiders are among the most common spiders found in buildings. Two of their lateral eyes touch each other on each side of the cephalothorax and are well separated from the other four eyes. Female house spiders have bodies which are l/8 to 3/8 inches long and the abdomen is often covered with dirty whitish or brownish hairs arranged somewhat like chevrons. House spiders spin irregular sheet webs in protected places in the corners of rooms, ledges, windows and under furniture. Unlike black widow spiders, males and females are often observed living together in the same webs. Webs of house spiders often have dead insects entangled in or lying beneath them. Some common household spiders, Genus Steatoda, are in the same family as the black widow, but are not poisonous. Adult females resemble the black widow in size and shape; however, there is no red hourglass marking on the underside of the abdomen and there is often a whitish T-shaped marking on the topside of the abdomen. Orb-weaver spiders Family Araneidae Legs rather stout and spiny. All eight eyes small, sub-equal, and seemingly grouped into

pairs. Web is an orb with a closed hub. Their retreat is often away from the web. Orb-weaver or garden spiders are generally large, with bodies l/2 to 1 inch long. They often have conspicuous black, white, yellowish or orange markings. These common spiders are often seen in late summer or fall. They are able to construct large, conspicuous webs with a central hub CONTINUED ON PAGE B10

Success lies in planning, tracking, evaluating

While it seems simple, for many beef producers, the secret to success and profit lies in knowing the operation’s objective and mapping out a plan to get there. At the recent 2012 K-State Beef Conference held at Kansas State University, Chip Ramsay, general manager of Rex Ranch in western Nebraska, advised producers to inventory their resources and consider the end goals of their operation before making management decisions. “Seldom do beef producers have the opportunity to create something from nothing,” Ramsay said at the conference. “Most of us inherit something and we have to take inventory to determine what we have, because that makes a difference in where we want to head,” he said. Ramsay has taken his own advice in managing Rex Ranch, letting the inventory and business objectives shape decisions related to grazing management, feeding, culling, breeding, calving and more. One of the ranch’s overarching goals is to lower cost of production while producing a calf that performs well for both the feedyard and the packer. The ranch manager tries to reach this goal by selecting replacement females from cows that produce desirable weaning weights, pregnancy rates, have low labor needs and make efficient use of range resources. Bulls for the ranch are selected from cows that thrive in their environment and exhibit excellent post-weaning performance. Ramsay also advised producers to do research on their options and seek advice from experts as they plan and explore management options. Ramsay emphasized to producers the importance of working from a ranch plan. Producers should write down their breeding objectives, inventory and research findings. They should also keep record of their inputs and outcomes, as these become the basis for building or modifying the plan in successive years. “It’s tough to write things down, especially in our industry because our biggest strength is our flexibility,” Ramsay said. “We don’t know what’s going to be thrown at us each day. We’ve made our living because we are able to adapt.” While it is difficult at times for producers to identify and nail down a direction they want to go, it is essential to moving forward.

Cow Hauling Season Is Right Around The Corner

We have 2 tandem axle cattle trailers for sale Call for information & pricing

Trader’s Dispatch, October 2012 — Page B7

The deadline for phoning in advertising for the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291. JOHN DEERE LOADER FOR SALE

John Deere loader with bucket and mounts off late model John Deere 4020. Runs off tractor hydraulics.................................................................................................................... $2250 Call Jay Gremaux (406) 538-8560

On-The-Farm or On-The-Road

When you need tires call us! We carry a HUGE inventory!!!

We offer a complete line of Goodyear & Firestone tires for swathers, balers, combines, tractors, automotive, light and heavy duty trucks.

ALIGNMENT SERVICE

Cars, Light Trucks, Heavy Duty Farm & Over-the-road Trucks

Cut Bank Tire

Phone 406-873-5025, Cell. 406-949-7717 — Cut Bank

YOUR DEALER FOR Truck Defender Grill Guards

We can order guards for semis or pickups!

website: www.cmoorefabequipment.com e-mail: cmooreinc@midrivers.com 855 Kinsey Road, Miles City, MT 59301 Trucking Services: Our drivers haul grain, hay, livestock and equipment across the county. We also use hoppers to carry bulk commodities. We Have Available Bradford Built Flatbeds

Merritt 53-ft. x 102” straight stock trailers with 3 compartments. Equipment Sales: Our company sells a wide selection of new and used trucking, construction and farm equipment, as well as recreation. Whether you are looking for a backhoe, a loader, or a tractor, we can deliver. Other equipment we have to offer includes: trucks, trailers, haying equipment, trenchers, pay loaders, land levelers, grain handling equipment, boats and snowmobiles. A bit of everything.

1989 Trail King belly dump trailer. Triple axle!

1992 CPS belly dump gravel trailer. We have more gravel trailers in our inventory! Call for information!

Jensen Bale Handlers

Rotary snowblower

1982 International F1954 T/A, 4000 gallon insulated tank truck.

2007 Featherlite 24-ft. steel stock trailer, center and rear gates have sliders. Clean trailer!

1987 Freightliner with tag axle.

1979 Ford F600 4x4 flatbed with crane.

1997 Ford F450 service truck with crane.

Electric over hydraulic

Fabrication & Welding Services: We provide commercial welding and iron repair services. Our staff works with all vehicles and machinery, including trucks and trailers. We can build anything you need out of iron.

John Deere fork lift.

Trader’s Dispatch, October 2012 — Page B8

New Holland Equipment

New Holland Windrowers

New Holland BR7090 Round Balers

New Holland Tractors New Holland Combines New Holland Guardian Sprayer

New Holland Air Drills

New Holland P2050

New Holland P2060 60 & 70-ft. folding drill

USED COMBINES

New Holland T9000 Series Tractors

New Holland P2070 Precision Air Drill

New Holland Suspended Sprayers

Zerbe Bros.

406-228-4311 Glasgow, Montana

USED HEADERS

CONSIGNMENTS

2009 New Holland / Honey Bee 4255 Grain Belt PLUS 42-ft. flex draper header, UII plastic finger reel, hydraulic fore and aft, hydraulic tilt, gauge wheels, transport trailer, fits John Deere 70 series combine. #UHHB02................................... CALL

2000 New Holland TR99, Honeybee 994 36-ft. header, 2100 separator hours. #UCNH41..CALL 1998 New Holland TR98 2300 separator hours, SP 36-ft. Honey Bee. #UCNH57.................. JUST IN 1994 New Holland TR97 2100 hours with MacDon 960 36-ft. draper header, 30.5x32 tires, straw chopper & chaff spreader. #UCNH37.....$60,000 1993 New Holland TR96 combine with twin rotor, SN 554419, 3109 engine hours, well maintained, annual service repairs, 30-ft. 971 auger head. #UCNH28................................................ $36,500 1988 New Holland TR86 combine with 971 30-ft. header. #UCNH61.................................................... $25,000 1988 New Holland TR86 combine with 971 header. #UCNH62.................................................... $25,000 1981 New Holland TR85 2200 separator hours, 24-ft. header. #UCNH58.................................. JUST IN

2005 New Holland 74C 30-ft. flex auger header, poly cutter bar with pickup reels. #UCNH53...$25,000 New Holland 973 30-ft. flex header, fits TR series. #UCNH59...................................................$8500 1998 New Holland 973 30-ft. flex header. #UCNH64...............................................$12,000 2-New Holland 971 13-ft. pickup header with RakeUp pickup attachment. #UCNH38..............$5500 1988 New Holland 971 12-ft. pickup header #UCNH63..................................................$5000 Case IH 1015 15-ft. pickup header with Case IH pickup attachment. #UCCA09...............................$5500 Massey-Ferguson pickup header, 13-ft., fits 510, 750 and 760. #UHMF61...................................... $500

USED WINDROWERS

USED TRACTORS

2011 Case IH Maxxum 140, 16 speed powershift, 3-pt., 540/1000 rpm PTO, 18.4R42 rear tires, loader & grapple, 900 hours.................. JUST IN 1976 John Deere 8630 225 PTO hp, Quad shift, 18.4x34 tires. #UTJD96..........................$16,900

1992 Hesston 8200 swather, diesel, cab, air, 14-ft. auger header, 3525 hours. #UWHS63.... $17,000 1983 International 4000 gas, cab, 14-ft. auger header. #UWIH14................................................... $6500 New Holland 21-ft. draper header. #UWNH27......... . ................................................................$1500

1999 Flexi-Coil 5000 47-ft. air drill, 12” spacing, 4” rubber packers, 2320 tow between cart.. $40,000 Flexi-Coil 5000 45-ft. air drill, 7.2” spacing, 550 trips, 2320 tow between cart............................... CALL 1997 Brandt QF2000 114-ft. sprayer, 1500 gallon, auto rate controller.....................................$6500 2004 Flexi-Coil 67XL 124-ft. wheel boom sprayer, windscreens, walking beam axles, Auto Rate...... . ..............................................................$18,000 1993 Flexi-Coil S65 100-ft. boom sprayer, no windscreens, 1500 gallon, Micro-Trak auto rate, air induction tips..............................................$6500 2009 Riteway 8100 78-ft. heavy harrow, approximately 6000 acres, 3255 Valmar applicator......... . ..............................................................$45,000 Wil-Rich 47-ft. tool bar, 5 section, 7 Flexi-Coil harrows, McKay knock-on sweeps........................$17,500 2006 New Holland BR780 round baler, twine/net, 4000 bales, hay applicator, standard pickup........ . ..............................................................$28,500 1997 New Holland 664 round baler, 1000 PTO drive, gathering wheels, hydraulic pickup lift........$7500 Vermeer 605L round baler, twine & net wrap, gathering wheels..................................................$5500 1993 Vermeer 604K round baler, makes 4-ft. bale, 540 PTO drive with gathering wheels........$4900 2009 Vermeer R2300 twin rake....................$16,500 2-Rola wheel rakes, 4- & 6-wheel.........$1700-$2000 New Holland 1431 disc bine, 13-ft. cut 1000 PTO drive, 3-pt. swivel hitch............................$13,000 John Deere 1600A MoCo, 16-ft. header, 1000 PTO drive...........................................................$7500 1992 Gleaner R72 combine, 2530 separator hours, 30.5x32 tires, 390 hours on new engine.$49,500 1992 Gleaner R72 combine, 2277 separator hours, 30.5x32 tires, 30-ft. header and trailer.....$45,000 1997 New Holland TR98 combine, 2240 separator hours, yield/moisture monitor, straw chopper, very, very nice..................................................$35,000

1995 New Holland TR97 combine, 1540 hours, Kirby spreader, no hours since re-con in 2008..$45,000 1990 New Holland TR86 combine, 24.5x32 tires, 1635 separator hours, 30-ft. 971 header, very nice. .......................................................$20,000 1979 Allis-Chalmers N5 combine, 24.5x32 tires with 27-ft. header, batt reel................................$7500 1978 John Deere 7700 combine, diesel engine, 3631 hours with 224 head, non hydro.................$8500

1987 Case IH 1680 combine, 30.5x32R front tires 90%, straw spreader, 3543 total hours, very nice, has been reconditioned..........................$22,000 1980 International 1480 combine, 24.5x32R3 front tires, straw spreader, 30-ft. 810 header, 3214 hours.......................................................$12,000 International 813 13-ft. pickup header with 5-belt Melroe pickup hydraulic drive....................$1500 Gleaner 13-ft. pickup header with Melroe attachment...........................................................$1500 Brandt 4000 grain vac, 1000 PTO drive..........$6500

Bearcat 1260 grinder mixer, bale feeder, 1000 PTO, nice............................................................$4500 International 140 48” roll over plow, 16” bottoms, 3-pt. mount.........................................................$3500

Zerbe Bros. “Setting The Standard”

1-800-228-5393 – 406-228-4311 SALES: Mike Guttenberg - Tim Guttenberg

62 1950 Years

2012

Glasgow, MT

Trader’s Dispatch, October 2012 — Page B9

USED ROUND BALERS

USED AIR DRILLS

2007 New Holland BR-780A with Bale Command, twine and net wrap, 1000 PTO, wide pickup. #UHN123................................................$21,000 2006 New Holland BR-780 with Bale command, twine and mesh wrap, wide pickup, 1000 PTO, hay acid applicator. #UHN120...............................$18,000 2005 New Holland BR-780 standard pickup, 1000 PTO, Bale Command. #UHN124............$14,500 1992 New Holland 660 with Bale Command, standard pickup, 1000 PTO. #UHN108.....................$7500

1993 New Holland 660 auto wrap, 1000 PTO drive. #UHN118................................................... $6500 1994 New Holland 660 auto wrap, 1000 PTO. #UHNH86................................................ $11,900 Hesston 560 with auto tie, 540 PTO. #UHHS51...... . ................................................................$5500 2002 Hesston 856A automatic, twine tie, 4500 bales, wide pickup. #UHHS54.............................. $9500 1999 Hesston 856T 5x6 bales, 75” wide pickup, bale kicker. #UHHS43..................................... $11,500

Vermeer 605M, twine, net wrap, wide pickup, hydraulic bale bicker, 540 PTO. #UHVM40............ $19,000 2003 Vermeer 605XL acu-bale “Plus” monitor, bale kicker, 540 PTO. #UHVM35.................... $11,000

1998 Vermeer 605L twine & mesh wrap, hydraulic bale kicker. #UHVM31............................. $12,000 1994 Vermeer 605K round baler, 1000 PTO. #UHVM33.................................................. $7500

USED SPRAYERS

2001 Flexi-Coil System 67XL 84-ft., windscreens, Flexi-Control. #NSF174......................... JUST IN 2000 Flexi-Coil System 67XL 100-ft., 1500 gallon, wheel boom, 18.4x26 tires, Flexi-Control Auto Rate, windscreens, double nozzles, rinse tank. #USF153................................................$17,500 2004 Flexi-Coil 67XL 90-ft. wheel boom, no windscreens, SP655 auto rate...................... JUST IN 1998 Flexi-Coil System 67XLT twin tank, 130-ft., foam marker, hydraulic unfold, air inductor tips. #USF139................................................$17,500 1998 Flexi-Coil System 67 110-ft., 1000 gallon, windscreens, wheel boom, Flexi-Control monitor. #USF151................................................$14,500 1994 Flexi-Coil 65XL 1500 gallon, non auto rate. #USF173...................................................$6500 1995 Flexi-Coil System 65 80-ft., 1000 gallon tank, windscreens, 3-switch controller............ JUST IN Flexi-Coil System 65 80-ft., 1000 gallon, 18.4x26 tires, 3 switch controller. #USF171.............$5000

USED MISCELLANEOUS

2010 John Deere 1830 60-ft., 10” spacing, 31/2” steel wheels, 31/2” Dutch, 1910 tow between cart, conveyor, variable rate drive double shoot #UDJ163......................................................................................JUST IN

2008 New Holland SD550 60-ft. air drill, 12” spacing, 550# C-shanks, 5.90x15 Concord style packers, doube shoot, stealths, SC430 tow between air cart, V.R. drive, dual fan, 18.4x38 duals, 10” auger. #UDNH08..... . .......................................................................................................................................................... CALL Concord 5012 50-ft., 3-rank, 12” spacing, standard cushion shanks, disc levelers, 3000 air system, hydraulic fan, 18.4x26 tires. #UDCN04.................................................................................... Special Price - CALL

Concord 4012 40-ft., 12” spacing, 3-rank, single shoot, C-shanks with 2300 tow behind tanks, 2” Bourgault openers. #UCCN10.........................................................................................................................JUST IN

2009 New Holland S1070 pull type sprayer, 134-ft., no windscreens, auto rate, combo jet dual nozzles. #USNH24...............................................$45,000 2006 New Holland SF115 90-ft. suspended boom, 1500 gallon, SP655 Auto Rate, rinse tank, windscreens.................................................. JUST IN 2007 Summers Ultimate 100-ft. suspended boom, 1500 gallon, no screens, Double Tee jets, 450 Raven, Norac height control.................. JUST IN 1996 Brandt QF2500 100-ft. wheel boom, twin tank, twin boom, Auto Rate, 18.4x26 tires, foam marker, Ace hydraulic & PTO pump. #USBT12...$10,900 2005 Bourgault 5710 54-ft. air drill, 9.8” spacing, pneumatic packers, Phoenix harrows, double shoot, Dutch points, 31/2” pair row, 6550 tow behind air cart, V.R. drive, 10” auger, duals........................................ CALL 2002 Flexi-Coil 5000 57-ft., 9” spacing, 4” rubber packers, single shoot, basic blockage, 550 lb trips, 3450 tow behind air cart, mechanical drive........ . ................................................. JUST TRADED

Bourgault fire rig with 1500 gallon tank and trailer. #USB000 ..................................................$3500 Vermeer 6800 bale processor, 1000 PTO drive. #UHVM38..................................................$7500

www.zerbebrothers.com Email zerbesales@nemont.net

1991 Flexi-Coil 5000 39-ft., 31/2” steel wheels, 9” spacing with 1615 tow between tank, mechanical drive. #UDF209...................................... $34,000

Zerbe Bros. Glasgow, Montana 406-228-4311 TOLL FREE 1-800-228-5393

2004 Flexi-Coil 2340 tow between cart, dual fan, mechanical drive, 8” auger. #UDF208.....$31,000 2006 Case IH 3380 tow between tank, variable rate drive, 30.5x32 tires.................................$45,000

SALES Mike Guttenberg Tim Guttenberg

Trader’s Dispatch, October 2012 — Page B10

Spider identification and management CONTINUED FROM PAGE B6

Distinctive violin-shaped marking on the very large anterior eyes. Legs usually short from which spokes radiate. All this is constructed in less than an hour. The female sits in the hub, cephalothorax. The six eyes are arranged in waiting to detect movement that signals prey has been captured. After mating, the female seeks a protected place to lay a cluster of eggs, some 300-800, which will hatch the following spring. Funnel web spiders and stout with the first pair Family Agelenidae sometimes enlarged. Diurnal. Spinnerets long, two segmented, and conspicuJumping spiders, like wolf ous. Eyes small, sub-equal, and arranged in two spiders, do not spin webs to capture prey, but rely on quickness and visual acuity. Jumping spiders and wolf spiders have two eyes much larger than the other six, probably an adaptation to help them better see their prey. Jumping spiders are small to medium sized spiders, usually stout bodied, short legged and hairy. They three pairs forming a semicircle. Redrawn from frequently have contrasting black, reddish, or Katson, 1978 yellowish markings. They are very agile, pouncBrown recluse spiders are easily recognized ing and feeding on small insects about the home. by a combination of two characteristics: a dark They are often seen on screens or near doors or fiddle or violin-shaped marking on the top side windows. relatively short rows. Web is sheet or platform- of the tan cephalothorax, and six eyes arranged Crab Spiders like with a tubular retreat leading off from the in three pairs forming a semicircle. Most other Family Thomisidae spiders have eight eyes variously arranged. Adult center or one edge. Funnel web spiders all have eight eyes about female brown recluse spiders are about l/2 inch the same size and slightly separated, bodies about long (legs excluded); males are somewhat smalll/2 inch long, and usually two dark longitudinal er. Both female and male brown recluse spiders stripes on a grayish cephalothorax. The most dis- can bite people and inject venom. Individuals tinguishing characteristic is a long posterior pair react differently to bites. A stinging sensation is of spinnerets. Funnel web spiders spin flat webs usually followed by intense pain. A small blister of silk which extend into tubes or funnels into arises and a large swollen area around the bite which the spiders retreat for protection, hence the becomes congested and swollen. While bites of name. The webs are often found in shrubbery near the brown recluse are generally not fatal, they buildings, or in the angles of windows, doors or result in a local necrotic lesion that heals slowly, buildings. They reach the peak of their population leaving an ugly scar. There are other spider bites in late summer and fall and often enter buildings that give a similar reaction, and these are often First and second pair of legs distinctly longer at that time. Most funnel-weavers die after the misdiagnosed by well-meaning physicians as brown recluse spider bites. and stouter than the third and fourth. Abdomen first frosts. Winter is passed in the egg stage. Wolf Spiders usually broad at the posterior. Crab spiders are Aggresive house spider Family Lycosidae commonly seen on flowers, do not construct a Agelenidae tegenaria-agrestis Eyes arranged in three rows with four large web, and are typically brightly colored. Swift-running spider distinguished from nonCrab or ambush spiders are somewhat crab-like poisonous funnel web spiders by chevron shape eyes on top and front of head and anterior, slightly curved row of four small eyes. Females carry the in shape and walk sideways or backward. They are medium sized and often brightly colored, with abdomens that are usually wide at the posterior end. The two front pair of legs are usually longer and stouter than the two hind pair and crab spiders often hold their legs poised to trap insect prey. They have eight relatively small, well spaced, light colored eyes. Crab spiders are usually found outside in gardens and landscaping where they spin no webs but forage for their prey or lie in ambush on blossoms or other parts of plants. They are able to gradually change colors to match flowers for camouflage. Management Spiders are beneficial, preying on insects, so on its abdomen and legs which are not banded control measures should only be used in situalike other funnel web spiders. tions where they become intolerable for instance, The aggressive house spider, Tegenaria agreswhere black widow or other spiders pose a threat tis, is becoming one of the most common spiders to individuals or pets. A broom or vacuum cleaner in the Northwest. This spider was first reported in the Seattle area in 1930. It is a prevalent spider globular egg sac attached by the spinnerets. The used to dislodge and move outside or crush spiin basements and in window wells of houses. fourth pair of legs is the longest and frequently ders will suffice. Keeping debris and wood piles away from living quarters will aid in limiting It rarely climbs vertical surfaces and is usually held stretched out behind the spider. food sources and spider havens. Spiders are offound only on the ground or lower floors. Experts Wolf spiders are medium to large spiders, and ten found outside under eaves and in corners of have called it the aggressive house spider because are usually hairy, brown or black, with long legs it bites with little provocation when cornered or adapted for running. They have good eyesight, residences. By carefully manipulating a broom, threatened. The aggressive house spider is im- an adaptation for chasing down their prey, para- one can remove the spiders and relocate them portant medically because of its ability to cause lyzing it and feeding. Webs are not used by wolf away from the house. Reprinted from extension service MontGuides. necrotic spider bites. (A necrotic bite causes spiders. Female wolf spiders carry the egg sac tissue to die.) The aggressive house spider is a attached to their spinnerets until the eggs hatch. MontGuides are fact sheets on a variety of sublong-legged, swift running member of the funnel They then carry the young spiderlings about on jects, available free from the Montana State web spider family. The brown abdomen has a dis- their backs for a time. Some of the largest spiders University Extension Service. You can order tinctive yellowish chevron pattern. The legs are a encountered in Montana are in this group. This MontGuides through your local county Extension uniform brown without the darker brown bands group is very mobile and may be found moving office, or visit us on the web at: HYPERLINK http://www.montana.edu/publications. For a that other nonpoisonous funnel web spiders have. into houses in the fall in search of prey. printed catalog of all MSU Extension publicaSpiders that don’t spin webs Jumping Spiders tions, call (406) 994-3273. Brown Recluse spiders Family Salticidae “Recluse Spiders” Square-fronted cephalothorax bearing four Family Loxoscelidae

Trader’s Dispatch, October 2012 — Page B11

Help for ranchers to operate sustainably

Tools to help Wyoming ranchers have sustainable operations are on a new University of Wyoming Extension website. “Ranchers have many tools at their availability like tractors, fencing pliers and calf pullers,” said Bridger Feuz, livestock marketing specialist for UW Extension. “However, sometimes it is harder to find good tools to help make important ranch decisions. The tools developed on this website are intended to fill that need for ranchers.” The Wyoming Ranch Tools website www. uwyoextension.org/ranchtools has fact sheets and six tools to help ranchers utilize the tools and better understand the concepts. “Ranchers are no strangers to hard work, as it fills up most of their days,” said Feuz. “Just like any other job on the ranch, making strategic decisions also takes some hard work and dedication. The tools on this website have been utilized effectively by producers to make good decisions, but the analysis is only accurate when a producer puts in a little hard work and effort.” Tools include: The partial budgeting template tool to help

make strategic decisions such as when to retain ownership of calves, when to market cull calves and whether to buy forages or livestock during droughts; the partial budget tool only looks at the actual costs and returns that will change and returns a value for the net benefit or loss. The net present value (NPV) tool analyzes an investment over time; the NPV provides producers with a five-, 10- and 15-year return estimate and a break-even year and includes a standard and an EconoRange version to help make decisions on range and pasture improvement projects. The AUM (Animal Unit Month) value tool provides a starting point for determining the value of pasture AUMs in a lease arrangement. The genetic investment tool provides producers with the amount per calf and the total annual amount of improvement they need to break-even on the investment when they purchase improved bulls to raise the level of their herd’s genetics. The stocking tool calculates the amount of available forage in a pasture and compares that to the animals’ needs, which helps provide estimates for length of grazing and number of animals; this

tool is designed for small operations (up to 30 acres) but is appropriate for ranches of any size. The sprayer calibration tool helps making calibrating pesticide applicators easier; UW has used the 1/128 method of sprayer calibration for several years, and thousands of pesticide applicators in Wyoming have been trained on this procedure. “No matter what conditions exist: good weather, drought, high prices, low prices, etc., strategic planning is essential to ranch sustainability, and these tools are designed to facilitate the strategic planning process,” said Feuz. For more information, contact Feuz at 307-7830570 or at bmfeuz@uwyo.edu. ##### “You must understand that since your grandchildren see you as the oldest person on the planet, they also expect you to be the smartest.” “‘Grandpa, how fast could Tyrannosaurus rex run?’ your five-year-old grandson asks after watching a dinosaur video. By the look on his face, you can tell that he chose to ask you because you were probably chased by one.”’

Chic Harbine Sales 8360 Hwy 10 West Missoula, MT

2001 Mack CL700 tri-axle dump truck with E7 460 Mack, 18 speed, 14,600# front, 44,000# rears on Camelback suspension, 16-ft. box, plumbed, 500,000 miles. Clean truck. .............................................$39,500

2001 International 9200i Series 60 Detroit 470 hp, 10 speed transmission........................ $19,500

2000 Peterbilt 379 tractor with C12 Cat @ 430 hp., 9 speed, 690,000 miles, full fenders, all aluminum wheels..................................$24,500

1988 Kenworth T800 with Big Cam IV 350 Cummins, 9-speed and Hendrickson suspension......$12,500

406-549-1047 or 544-0655

1999 Peterbilt 378 Heavy Haul tractor with 550 Cat, 18 speed, 20,000# front, 22,000# lift axle, 46,000# rears, aluminum cab guard, tool boxes, double frame. 618,000 miles.....................................$42,500

2005 Peterbilt 379 tractor with ISX 530 Cummins, 18 speed, 46,000# rears, rear diff lock, 232” wheelbase. 425,000 miles.......................$44,500

2001 Peterbilt 378 Heavy Haul tractor with C15 550 Cat, 18 speed, 14,600# front, 46,000# rears, double diff lock, steerable lift axle, wet kit, double frame. 588,000 miles.$42,500

2005 Sturdyweld 4 axle gravel pup, 10-ft. aluminum box, extendable tongue, locking turn table on front axle, super singles on aluminum wheels. Low use...................$24,500

1997 Peterbilt 378 Heavy Haul tractor, 550 Cat, 18 speed, 14,600# front, 46,000# rears, double diff lock, steerable lift axle, aluminum cab guard, tool boxes, wet kit......$37,500

1998 Peterbilt 379 daycab tractor with N14 Cummins at 525-hp., FRO16210 transmission, 40,000 lb. rears and 135,000 miles on factory recon.....................................$28,500

JUST ARRIVED 2000 Peterbilt 379 N14 Cummins, 500 hp, FR016210C transmission, 40,000 lb. rears.

1989 Kenworth T800 tractor with Series 60 Detroit @ 450 hp., 15 speed, 40,000# rears on spring suspension...........................$13,500

2006 Peterbilt 378 tractor, ISX 530 Cummins, FRO18210 transmission, 46,000 lb. rears.....................$38,500

1995 Peterbilt 357 dump truck, Series 60 Detroit, 500 hp, 13 speed, 20,000 lb. front, 46,000 lb. rears, steerable lift axle, 17-ft. box, plumbed................................$24,500

2001 Mack CH613 E7 460 Mack, 12 1996 Ford L9000 8-axle transfer with speed, Chalmers suspension, 8 axle 3406E Cat 435 hp, 8LL transmission, transfer set, 16-ft. Reliance boxes, 14,600# front, 46,000# rears on 1998 Reliance trailer.............$30,500 Hendrickson, double differential lock. 1997 Reliance 4-axle transfer trailer, 16-ft. boxes, hydraulic drive transfer.. .............................................$27,500

2000 Ledwell folding beavertail 35 ton equipment trailer, 48-ft. trailer, 38-ft. deck, air ride suspension, hydraulic ramps, hydraulic winch, excellent condition................$26,500

1988 Peterbilt 379 7-axle transfer set, 3406B Cat 425 hp, 15 speed, Hendrickson suspension, 16-ft. boxes, hydraulic drive transfer........... .............................................$19,500 Check out our website: www.chicharbineequipment.com

2-1995 Sturdy Weld 4 axle dump pups, 18-ft. box, extendable tongue, front steerable lift axle, electric roll tarp. Each.............................$18,500

1998 Peterbilt 379 daycab, Cummins N14, 500 hp, RTO16210C transmission, air leaf suspension, 232” wheelbase, new paint, 130,000 on rebuilt engine, excellent condition. .............................................$27,500 1996 John Deere 310D 4x4 backhoe, cab, extend-a-hoe, 4-in-1 bucket, new tires, 4400 hours, extra clean.....................................$24,500

2000 Columbia triple axle gravel pup, 16-ft. box, extendable tongue, 60” axle spacing, super singles on aluminum wheels, clean trailer.......... .............................................$17,500

Many other construction trucks & trailers available.

1995 Ford L9000 Super 16 dump truck, N14 Cummins, 8LL transmission, 20,000 lb. front axle, 2 steerable lift axle, strong arm............ .............................................$25,900

Trader’s Dispatch, October 2012 — Page B12

STRAW FOR SALE

Dry, rotary soft winter wheat straw, large round bales with over the edge John Deere net wrap. Trucking available or will load......................................................... $20/bale For any delivered or picked up by December 1..... $18/bale Limited supply of small square straw bales............. $2/bale

Aaron Boehm 406-355-4402 Rudyard, MT

TRACTORS & ATTACHMENTS

NEW

NEW Kioti CK27HST 4WD, KL130 loader..................................$21,500 Oliver 1800 row crop, gas, 3-pt., PTO, loader.....................................$6500 Oliver 1800 Wheatland with front blade......................................$4500 Oliver 1650 diesel, wide front, 3-pt., PTO. Good straight older tractor...... . .............................................$5000 Oliver Super 55 with complete engine rebuild....................................$3850 Oliver 1755, 77 & 1855.....FOR PARTS

John Deere 2020 diesel, 3-pt., PTO, powersteering, JD 37 loader. Nice clean tractor...........................$9500 John Deere 70, gas, Farmhand F10 loader, grapple.......................$4500 Ford 5000 with bad engine, Selecto-speed (good transmission) for parts......................................$2000 Case SC narrow front, runs........ Offer?

TILLAGE & SEEDING

Bush Hog 3 point, 12-ft. plow.....$1650

We will be closed Oct. 20 to Oct. 28

CONSIGNED

Haybuster 256 Plus II bale processor.. . .............................................$4500 Massey-Ferguson 510 combine with Perkins diesel........................ CALL New Holland 1032 pull-type balewagon....................................$5000 New Holland 1116H header for 276/9030 bidirectional...........$4500 Gehl 1400 round baler. 4x5 bale...$750 Bale Stooker, small square baler.$350 Sitrex 2 wheel 3-point rake...........$350 Ditcher pull-type with manual adjusting 5-ft. wings.................................$295 We now have

SITREX RAKES

Ezee-On 24-ft. disc with wings....$3500 Dearborn 3-point offset disc..........$500 John Deere one bottom plow........$300 Disc 9-ft. pull-type, needs work... CALL 1 set of 3 roller packers.................$350 Feterl grain auger..........................$300 3-Point bucket scoop..... MAKE OFFER

##### In the future, the depletion of hydrogen will dry out our oceans and all but shut down geologic cycles that stabilize our planet’s climate. Life might continue, but only in the polar regions. NEW TARTER 3-pt. equipment 6-ft. HD landscape rake.................$700 7-ft. HD landscape rake.................$735 8-ft. HD landscape rake.................$780 7-ft. grader blade............................$385 7-ft. HD grader blade.....................$870 8-ft. HD grader blade.....................$915 6-ft. MD disc...................................$915 4-ft. rotary cutter............................$935 5-ft. rotary cutter..........................$1015 6-ft. rotary cutter..........................$1200 QA super spear.............................$435 Middle Buster potato plow............$165

MISCELLANEOUS

Gorman 4” irrigation pump, 540 PTO drive.........................................$400 White Cab to fit Oliver 55 Series tractor............................ MAKE OFFER 2 horse bumper pull trailer.............$750 1 set of 13.6x38 tire chains, excellent condition..................................$250

USED HAYING

Hesston 30A stacker.... MAKE OFFER Bucket mount bale spear...............$400

NEW EQUIPMENT

United 784 HD 7-ft. box scraper....$942 United 672 HD 6-ft. box scraper....$825 United 566 HD 51/2-ft. box scraper..$875 United 560 HD 5-ft. box scraper....$850

WALLENSTEIN

Oliver 60 2WD tractor. Completely restored..$4500

wood splitters, chippers and log grapples available.

Helfert’s Helena Farm Supply

MILLER LOADERS

Phone (406) 227-6821

East Helena, Montana

Serving HELENA and surrounding areas for 62 YEARS!

SHAVER POST POUNDER

Come visit us at www.helenafarmsupply.com

No-till farming helps capture snow and soil water

By Ann Perry, Agricultural Research Service A smooth blanket of snow in the winter can help boost dryland crop productivity in the summer, and no-till management is one way to ensure that blanket coverage, according to U.S. Department of Agriculture (USDA) research. Agricultural Research Service (ARS) soil scientist David Huggins conducted studies to determine how standing crop residues affect snow accumulation and soil water levels across entire fields. ARS is USDA’s chief intramural scientific research agency, and this work supports the USDA priority of responding to climate change. Huggins, who works at the ARS Land Management and Water Conservation Research Unit in Pullman, Washington, carried out this investigation on two neighboring farms. Both farms have the hilly topography typical of the Palouse region in eastern Washington. But much of one farm has been under continuous no-till management since 1999, while the fields on the other farm were conventionally tilled. For two years, snow depths, density and soil water storage were measured manually at hundreds of points across the fields on both farms. Residue height at data collection points was also measured on the no-till fields. Huggins found that standing wheat residue on the no-till farm significantly increased the amount and uniformity of snow cover across the entire field. Snow depths on the notill field ranged from 4 to 39 inches, with an average depth of 11 inches, while snow depths on the conventionally tilled field ranged from 0 to 56 inches, with an average depth of 8.5 inches. The snow distribution pattern on the no-till farm made soil water distribution more uniform and increased soil water recharge rates there. The more uniform snow distribution under no-till was particularly apparent for ridge tops and steep south-facing slopes where there was typically 4 to 8 inches more snow than on conventionally tilled fields. Huggins calculated that the greater storage of soil water in no-till systems could increase winter wheat yield potential by 13 bushels per acre on ridge tops, six bushels per acre on south facing slopes, and three bushels per acre in valleys. As a result, regional farmers could increase their winter wheat profits by an average of $30 per acre and as much as $54 per ridge-top acre. Producers affected by the 2012 drought might also benefit from using no-till to increase the amount and uniformity of snow cover on their fields. This would increase soil water recharge rates and soil moisture storage, which would facilitate the return of drought-stricken fields to their former productivity. Results from this work were published in 2011 in Transactions of the ASABE.

Raspberry crumble

Helfert’s Helena Farm Supply Phone (406) 227-6821 East Helena, MT New Mechron UTV’s In Stock (2) Kioti Orange

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a 5-year-old raspberry patch. This summer, I had a bumper crop in terms of production. I have never had so many berries. However, instead of growing like raspberries, the majority grew more like little crowns on the stem piece that holds them. When I would go to pick them, the berries would fall apart in my hand. If I brushed my hand against one while reaching for another, it would fall off the plant. For about every regular berry, I had 10 to 20 of these crowns. On the up side, they did not have as many seeds and they were the sweetest they ever have been. The bees were very thick in the patch this spring. Did they overdo the pollination? Would too much watering cause this? I cannot think of anything I did differently from other years. Now that the season is past, my husband wants to clean up the patch. Is it too early to prune the old growth out to make room for the new stuff that will come up in the spring? A: Raspberry crumble is a virus that caused the problem. The most common are raspberry mosaic and tomato ring spot. There is no cure for the virus. If you can remember which plants exhibited this problem, eliminate them completely. Get the old canes cut back now and wipe out any plantings that may appear to be wimpy or weak. Glad that you otherwise had a banner year of fresh fruit to enjoy because there is nothing like it. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Dying pumpkin plants

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have been raising pumpkins and selling them as my mission project to build churches in India since 2000. It has been great fun. Last year, I harvested 5,000 pumpkins from my little 1.5-acre patch. This year, I am having problems with the plants dying. I can’t figure out what’s going on. I planted 2,000 seeds (same variety as usual) in peat pellets around the first of May. I put the plants in the field on May 22. They were healthy and vigorous and doing well until last week. I thought they were dying because we had a very strong wind. However, it appears the stems are drying up at the point they touch the soil. It has not been hot or dry and the plants have not been exposed to chemicals. The one row that I planted from seeds is doing fine, but about onethird of the seedlings in the other rows have died. It is not cutworms and I don’t see evidence of anthracnose. Do you have any ideas? A: Because no insects are present and the stems are not cut off at soil level (cutworms), I suspect one of the wilt diseases is at work, which could be phytophthora, fusarium or verticillium. Which one (or a bacterial wilt) can be determined only through a lab test. At the symptomatic stage with this crop, nothing can be done except remove the infected plants and spray an all-purpose fungicide on the plants that are not infected. While your mission is very humanitarian, you need to understand that planting the same crop on the same site every year eventually will lead to problems such this. Crop rotation is a must. I’ve copied your email and my response to Kasia Kinzer, our NDSU plant diagnostician, who will email you instructions on how to submit a sample for lab analysis and proper treatment options. Let’s hope that most of your crop can be saved and your mission can continue its successful course. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu.

Trader’s Dispatch, October 2012 — Page B13

Deadline for advertising in the November 2012 issue is FRIDAY, NOVEMBER 2.

406-278-7940 or 406-278-5469 FAX 406-278-7435 303 N. Virginia - Conrad, MT

www.sullivanbrosconstruction.com

Licensed - Bonded - Insured

Statewide Service “When you need the job done, and you need it done right....... Feel free to give us a call during the day or at night!”

Plow in your water lines, gas lines, etc. Up to 4” in diameter and up to 6-ft. deep

ALSO SEE US FOR

✓ Directional Boring

✓ Excavation Needs

☛ WE HAVE

✔ Excavator - ✔ Backhoes - ✔ Trucks ✔ Compactors - ✔ Skid Steers - ✔ Loader

Job completed from start to finish - Call for price quote

1-800-214-4654 or LOCAL AREA 406-265-6387 COMING IN

TRAILERS

2013 Maurer 40-ft. aluminum hopper, steel wheels, spring suspension. $2000 Factory Rebate 2010 Maurer 40-ft. steel hopper, steel wheels, spring suspension.

1996 Cornhusker 46’6” hopper, 3 axle, steel wheels, air gates, single, dual, 11-22.5 single tires...................................................... $18,000

2006 Freightliner Columbia 14L Detroit, Ultrashift 10 speed, 10 aluminum wheels, Lo-Pro 22.5 tires...............................................$30,000 2007 Freightliner Columbia C13 Cat, 13 speed, 3 way locking rears, 246” wheelbase.

2000 Peterbilt 379 extended hood, Cat 3406E 550 hp, 18 speed, Lo-Pro 24.5 tires, 10 aluminum wheels..........................................$30,000

NEW 2013 Maurer hopper, 40-ft., spring suspension, steel wheels...........................$27,750

2-2012 Wilson 41-ft.x66” ag hoppers, 90% tires and brakes, 2 rows of lights, S/S rear, 2-spring suspension...........................................$31,500 1997 Wilson hopper pup, 30-ft., spring suspension, aluminum wheels, Lo-Pro 24.5 tires, tandem dolly on turntable.................... $21,500 1991 & 1996 Western hopper doubles, 40-ft. lead, 24-ft. pup, spring suspension on lead, air ride on pup, Lo-Pro 24.5 tires on aluminum wheels, tandem dolly on turntable, new tarps.. ............................................... For set $34,000

New Watson Chalin steerable lift axle with fabricated axle. Includes air kit........ .....................................................$4600 New Watson Chalin steerable lift axle suspension. Includes air kit..........$2600

Check Our Web Site:

www.vaughntrucksales.com

1972 Fruehauf 24-ft. pup trailer, 3 axle, turn table, 4’6” tongue, 24.5 tires, aluminum wheels, spring suspension.................................$11,500 1972 Fruehauf 21-ft. pup, 10-ft. tongue with turn table, 24.5 tires on steel wheels...............$9500 New homemade 20-ft. hopper pup, steel wheels, 11-24.5 tires, ag hopper, 20-ft. drop tongue...... .............................................................$19,500

12-Great Dane reefers, 1996-2001, 50-ft. spread axle, TK unit............................. $8000 -$10,000

96” wide converter dolly, single axle, air ride, 22.5 tires, on Daytons.........$2200

Storage Trailers for rent by day, week or month

28-ft. to 53-ft. van trailers for storage 28-ft. and 53-ft. reefer trailers

2005 Peterbilt 378 set back front axle, Cat C15, 13 speed, 70” sleeper, 10 aluminum wheels..... .............................................................$36,000 As daycab.............................................$34,000 2004 Peterbilt 379 day cab, short hood, Cat C15 475 hp, 13 speed. 2001 Kenworth W900L Cummins N14 500 hp, 13 speed, 296” wheelbase, lift axle, 11-24.5 tires on aluminum wheels, rear locking differential.... .............................................................$37,000 2001 Kenworth T800 day cab, Detroit, 13 speed.

Hydraulic Wet Kit to run end dump trailer with new air shift PTO and pump, new tank and console in cab.............. $1550 Similar savings on other applications

Vaughn Truck Sales

2100 Highway 2 East • Havre, Montana

2000 Freightliner FLD 120 Series 60 Detroit, 360 hp, 10 speed, single axle, all steel wheels, 468,000 miles, headache rack, air operated oversize load sign.................................$14,500

1997 International 4900 DT466, 7 speed, spring suspension, 11-22.5 tires, 6 steel wheels, rollback wrecker body, 13-ft. upper, 28-ft. lower, 3 winches, aluminum deck, rear underreach..... .............................................................$21,000 1986 Ford L9000 day cab, Big Cummins 350 hp, 15 speed, Neway air ride, 3.90 ratio, 11-22.5 tires @ 85%.............................................$8500

Evenings & Weekends Call Chuck @ 265-6387 or Jim @ 265-6367

Trader’s Dispatch, October 2012 — Page B14

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

CRAWLER FOR SALE 1978 Cat D6C 10K crawler, 100% Cat undercarriage, recent rebuilt powershift transmission and motor, angle blade. Machine is in exceptional condition and runs like new.

Call Garrett 509-220-5025 or toll free 888-272-8733

2003 International 9900I ISX Cummins, 500 hp, Jake, 13 speed, 72” pro sleeper, Eagle interior, nice tires! Very clean inside and out........ ...........................................$25,500

2001 Freightliner FLC120 Classic 62” midroof sleeper, Detroit Series 60, 470 hp, Jake, 10 speed, air ride suspension, air ride cab.....$25,500

1994 Kenworth T800 daycab, N14 Cummins red top, Jake, 10 speed, dual line wet kit, airride suspension, aluminum wheel............. Coming in

2003 Peterbilt 379 extended hood, Cat C15 6NZ 475 hp, Jake, 18 speed, 70” sleeper, 270” wheelbase, American Class, leather seats. Nice ride!...... ........................................................................................................ $42,500 2003 Peterbilt 379 extended hood, Cat C15 “6NZ” 475 hp, Jake, 13 speed, 70” sleeper, 20” custom fiberglass bumper, “Gangsta” custom front fenders, custom fiberglass drop visor, custom filler panels under sleeper/cab, Accent interior, 650,000 miles!!........................................................... $42,500

1998 Kenworth W900L daycab, N14 Cummins Celect Plus, 525 hp with 215,000 miles on out-of-frame overhaul, Jake, 15 speed overdrive, 260” wheelbase, steerable air up/ down tag axle, good rubber, all aluminun wheels, VIT interior..$28,500

1981 Kenworth W900L Extended Hood “A” Model Classic!!! Cummins Big Cam 400, Jake, 5x4 air shift, 60” flattop sleeper. If this truck could talk, there would be some stories!... ...........................................$23,500

Partnership to develop better wheat varieties

By NDSU Extension Service North Dakota State University (NDSU) and Monsanto announced recently a collaboration that will allow both to improve their wheat breeding programs. The collaboration brings together the breeding research of Monsanto and NDSU to develop better wheat varieties. “We are pleased and excited about this opportunity to accelerate our hard red spring wheat breeding program with this research partnership,” said Ken Grafton, NDSU vice president for Agricultural Affairs; director of the North Dakota Agricultural Experiment Station; and dean of the College of Agriculture, Food Systems, and Natural Resources. “Having our wheat improvement team utilize Monsanto’s advanced breeding technology tools is an important step in allowing the NDSU program to remain successful well into the future. And joint research projects to develop new breeding and genetic tools will improve the breeding efficiencies of our programs, with the ultimate goal of providing the best genetic material to the North Dakota wheat grower.” “We are committed to delivering improvements in wheat through advancements in breeding and are pleased to be working with a public university that shares our commitment to enhancing the productivity of wheat,” added Anthony Osborne, Monsanto wheat business development lead. “Monsanto has a strong history of collaborating with universities and public sector institutions around the world, and we believe growers will continue to benefit from collaborations that bring together complementary wheat research programs.” This relationship is consistent with the National Association of Wheat Growers’ call for investment in wheat, and during a time when interest and support for new technologies in wheat remains high. “Wheat producers always have sought new technologies to enhance their competitive advantage and move the industry forward,” said Neal Fisher, North Dakota Wheat Commission administrator. “This public/private relationship builds on the longstanding producer partnership with NDSU, offering technological advancements to improve the competitiveness of wheat in all sectors, including greater producer profitability, continued emphasis on quality and premium end-use performance, and ensuring the wheat industry’s role as a leading contributor to the economy of North Dakota.”

Moving surviving sucker tree

2005 Dodge 2500 SLT crew cab, 5.9L Cummins diesel, automatic, 4x4, short wheel base, leather interior, recent reman engine and transmission with paperwork......$17,500

1997 Ford F350 XL standard cab, 7.3L Power Stroke diesel, 5 speed, 4x4, flatbed, 245,000 miles....$7500

1999 Ford F350 Super Duty 4x4 with 7.3L Power Stroke diesel, new automatic, new BFG tires, alumi2001 Dodge 3500 1-ton dually, reg- num wheels, nice custom built ular cab, Cummins diesel, 6 speed, flatbed with auxiliary fuel tank and 4x4, flatbed with gooseneck ball pump, air bags, loaded. Lots of hisand toolboxes, 190,000 miles.......... tory at Rocky Mountain Truck Ser...........................................$12,500 vice!....................................$13,500

2004 Trail King quad axle bellydump, spring suspension, aluminum wheels, push block, air clam gate....................................$41,500

BUY - SELL - RENT

2008 Dodge Charger What More Is There To Say ?OH YEAH!!! It’s A HEMI!!!.................$10,500

1997 Kenworth T800 with 16-ft. steel dump body and hoist, 3406E Cat, 475 hp, Jake, 10 speed, AG400 air ride with Timbren blocks, steerable air up/down tag axle, dual SS Vortox breathers and stacks, all aluminum wheels, nice rubber, electric tarp!........................$35,500

1990 Ford F250 XL 4x4, standard cab, flatbed, 302 EFI, 5 speed$3250 2001 Ford F250 extended cab, short wheel base, 7.3L Power Stroke diesel, 4x4, 6 speed manual, 218,000 miles.....................$10,500 Single axle 96” wide convertor dolly, spring suspension, Budd wheels, extendable drawbar, good tires........ ..............................................$1850 www.rockymountaintrucksales.com

5808 2nd Avenue N., Great Falls, MT Phone 406-727-2000 or cell 576-7777

By Ron Smith, Horticulturist, NDSU Extension Service Q: I noticed that you take questions, so here is the question. I bought three acres of wooded land. After 36 years in Wyoming and Montana, I was sick of the wind and am back to my birthplace. In the woods are white pines, and I came across a burr oak. I’m sure it is a burr oak because of its extremely rough bark. I have received different answers to my question. The original tree was cut down and a backhoe dug right at the side of the old stump. The stump and roots are dead. However, a sucker has rooted that is 16 to 18 feet tall and is a real nice tree. Some have told me that a sucker won’t live. Because of its size and root base, I think this is a new tree the same as you’d buy from a nursery. As slow a grower as a burr oak is, I would love to save the tree because I am going to fill in the hole as a natural wooded area, so I would like to locate the tree closer to the house. At 68 years of age, I know I won’t see a mature tree. (New Holstein, Wisconsin) A: This is a permanent tree in its present location. Surviving suckers eventually will grow into mature trees and it sounds like this one is well on its way. However, you need to wait until it is dormant before moving it. Have a tree spade operator with the largest spade available move it this fall after the leaves have dropped. I doubt that you could dig a big enough root ball and haul it over to the new site yourself. Good luck and enjoy this beautiful tree as it continues to grow at the new site. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page B15

LOADER TRACTORS

2011 John Deere 7130 (100 PTO hp) 20 speed PowrQuad transmission, MFWD, 3 hydraulics, 3-pt. hitch, dual PTO, 18.4x42 duals, factory warranty, JD 740 loader with 8-ft. bucket, grapple and joystick..........$109,500 2010 John Deere 7130 (100 PTO hp) 16 speed PowrQuad transmission, MFWD, 3 hydraulics, 3-pt. hitch, dual PTO, 18.4x38 duals, new JD H360 loader with 8-ft. bucket grapple and joystick.............................................$92,750 2000 John Deere 7810 (150 PTO hp) 20 speed PowrQuad transmission, MFWD, 3 hydraulics, 3-pt. hitch, dual PTO, 320/90R50 duals, JD 740 loader, 8-ft. bucket, grapple and joystick.............................................$69,500 1998 John Deere 7810 (150 PTO hp) 16 speed PowrQuad transmission, MFWD, 3 hydraulics, 3-pt. hitch, dual PTO, 14.9R46 duals, new JD 740 loader with 8-ft. bucket, grapple and joystick......................................$54,500 1994 John Deere 6200 (66 PTO hp) 12 speed transmission, 2WD, 3-pt. hitch, PTO, 16.9x30 duals, JD 620 loader with 7-ft. bucket, grapple and joystick......................................$27,500 John Deere 5055E (55 ph) 9 speed transmission, MFWD, 3-pt. hitch, JD 553 loader, 6-ft. bucket. ONLY 30 hours....................$30,000

USED 2WD, MFWD TRACTORS

USED 4WD TRACTORS

USED HAY & FORAGE

2011 John Deere 7230 (110 PTO hp), 16 speed, PowrQuad transmission, MFWD, 3 hydraulics, 3-pt. hitch, dual PTO, 480/80R38, factory warranty, LOW hours...........$95,000

2001 Case IH STX325 (325 hp), powershift, 4 hydraulics, PTO, 20.8x42 duals,......$95,000

2010 John Deere R450 windrower with 995 rotary platform...............................$119,500

1994 John Deere 8570 (250-hp), 12 speed transmission, 4 hydraulics, 20.8x38 duals.... ........................................................$55,000 1979 John Deere 8640 (229 PTO hp) 16 speed transmission, 3 hydraulics, PTO, 20.8x38 duals,with JD 12-ft. dozer................$24,500 1975 John Deere 8430 (175 PTO hp) 16 speed transmission, 3 hydraulics, dual PTO, 18.4x34 duals..................................$15,000

1988 Hesston 8100 windrower, 16-ft. auger platform, 21-ft. draper platform........$16,500 1995 MacDon 6000 hydro.......................$5500 Case IH 8830 draper platform, 25-ft. center....... ...........................................................$3500 Versatile 195 D platform...........................$750 John Deere 3960 forage harvester with 3-row 30” row crop. . .................................$11,500 John Deere 3960 chopper with 2RN head........ ...........................................................$4500 John Deere 3960 forage harvester with 2 row, 30” head.............................................$2500 John Deere 3-row row crop, hd, yellow. .$5500

2004 John Deere 7920 (170-hp), IVT transmission, MFWD, 3-pt. hitch with quick hitch, 3 hydraulics, PTO, 480/80R46 duals. .$99,500 2004 John Deere 7920 (170-hp), IVT transmission, MFWD, 4-pt. hitch with quick hitch, 4 hydraulics, 380/90R50 duals. .........$97,500 1994 John Deere 7800 (145 PTO hp) 16 speed PowrQuad transmission, MFWD, 3-pt. hitch, 3 hydraulics, dual PTO, 420/80R46 duals.... ........................................................$49,500 1983 John Deere 4850 (192 PTO hp) 15 speed powershift, MFWD, 3-pt. hitch, 3 hydraulics, PTO, 20.8x38..................................$45,500 1976 John Deere 4630 (150-hp), Quad-Range transmission, PTO, 20.8x38 singles, John Deere 10-ft. dozer. ..........................$16,500 1973 John Deere 4430 (125 PTO hp), QuadRange transmission, dual PTO, 2 hydraulics, 20.8x34 duals..................................$12,500 International 766 (85-hp), cab, 2 hydraulics, 18.4x34 duals, 5-ft. side-mount mower. $7450

USED COMBINES & HEADERS

2.9% Fixed Rate On All Used Combines - oac 2008 John Deere 9770STS Contour Master, 520/85R38 duals, chopper, low hours.......... ........................................................... CALL 2000 John Deere 9750STS. 30.5x32 duals, chopper.............................................. CALL 2008 John Deere 9670STS with 520/80R38 duals, chopper, low hours................... CALL

1983 John Deere 7720 24.5x32, straw & chaff spreader, 224 platfform....................... CALL 2004 John Deere 893 cornhead, 8-row, 30-ft... ........................................................... CALL 2006 MacDon 973D platform.................. CALL 1997 MacDon 962D platform.................. CALL 2008 John Deere 936D 36-ft. draper platform, pickup reel.......................................... CALL John Deere 930 platform........................ CALL 2009 John Deere 635D header with transport. ........................................................... CALL 2-2004 John Deere 635F 35-ft. flex platform.... ........................................................... CALL 2005 John Deere 630F 30-ft. flex platform....... ........................................................... CALL 2010 John Deere 630R platform, pickup reel... ........................................................... CALL 2008 John Deere 630R header..... $$ SAVE $$ 2009 Case IH 2010 rigid platform, bat reel, less than 100 hours.................................... CALL Elmer 30-ft. header trailer........................ CALL

2002 John Deere 9650STS, 800/65R32 singles, chopper, grain tank extensions........... CALL 1989 John Deere 9600 with chopper, 30.5x32 duals................................................... CALL

Haybuster H-1000 tub grinder..............$12,500 2007 Brandt 13x70 auger....................$17,500 Westfield auger.......................................$2000 1993 Rem 552 grain vac.........................$5500

USED ROUND BALERS

0% Financing

On Huge Selection of Used Round Balers - oac 2010 John Deere 568 wide pickup, net wrap.... ........................................................$41,500 2008 John Deere 568 wide pickup, big tires, net wrap. . .............................................$31,500 2005 John Deere 567 wide pickup, net wrap.... ........................................................$23,500

2006 Vermeer 605M loaded.................$21,500 1998 Vermeer 605L net wrap...............$11,500 1993 Vermeer 605K................................$7950 2006 New Holland BR780...................$16,500

USED LAWN & GARDEN

2005 John Deere 567 wide pickup, net wrap. .. ........................................................$22,500 2005 John Deere 567 wide pickup, net wrap.... ........................................................$21,900 2005 John Deere 567 wide pickup, net wrap.... ........................................................$16,500 2003 John Deere 567 wide pickup, net wrap.... ........................................................$24,500 2003 John Deere 567 wide pickup, net wrap.... ........................................................$21,500 2002 John Deere 567 wide pickup, net wrap.... ........................................................$18,500 1991 John Deere 535.............................$6500 1989 John Deere 535.............................$8500 1979 John Deere 510.............................$1500 Case IH RBX562..................................$12,500 2002 Case IH RBX561............................$9500 1997 Case IH 8480.................................$5500 1992 Case IH 8460 round baler..............$3500

USED SEEDING EQUIPMENT

Flexi-Coil 5000/2320 57-ft. air hoe drill, 7.2” spacing. ..........................................$42,500 (3) John Deere 9350 hoe drills, 8-ft. units, 10” spacing with JD transport. .................$6500

2011 John Deere X748 with attachments......... ........................................................$19,500 2007 John Deere X540 lawn and garden tractor, 54” mower, powerflow bagger, new engine... ...........................................................$5750 John Deere X520 lawn tractor, 54” deck....$4350 John Deere 318 lawn tractor with attachments..................................................$2950 2004 John Deere LT180 lawn & garden tractor........................................................$1850 2001 John Deere LTR166, dump hopper. $1750 John Deere 214 lawn & garden tractor with C48 broom.................................................$1500 2002 John Deere LX279 lawn tractor.....$1500 2009 John Deere LA155 lawn tractor.....$1500 John Deere LA140 lawn tractor, 48” deck. $1350 2005 John Deere L120 lawn tractor with bagger.......................................................$1350 1992 John Deere FT262 lawn & garden tractor........................................................$1150 1992 John Deere GT262 lawn tractor......$975 1998 John Deere LT166 lawn tractor........$650 John Deere 345 with attachments............$550 Yardman Rider with broom.....................$1250 Husqvarna 4217 front mower, 42” deck. $2250 John Deere SB 14 mower.........................$200 John Deere 320 snowthrower...................$150

USED MISCELLANEOUS

USED TILLAGE TOOLS

2002 John Deere 2700 mulch ripper....$21,500 AGCO Ultra mulcher............................$16,500 Case IH 415 30-ft. roller harrow, S-tines............ ........................................................$16,500 John Deere 960 field cultivator............$12,500 Noble 24-ft. field cultivator.......................$1250 Westgo 20-ft. field cultivator, harrows......$2250 International 145 5 bottom in furrow, two-way plow....................................................$4950 Ace 5-bottom 16”, two-way plow, in furrow........ ...........................................................$2950 Harrel 2804 16-ft. switch plow, 4 bottom..$1950

John Deere 740 loader, 7000 Series mounts, 8-ft. bucket, grapple, Joystick ............$8500

USED BEET EQUIPMENT

Artsway 9420 beet harvester, 6 row, 24” row finder, rear steer...............................$19,500 Artsway 9420 beet harvester, 6 row, 24”, row finder, steerable. .............................$17,500 Artsway 698 beet harvester, 6 row, 24” rowfinder, rear steer..............................$19,500 Red River 624 beet harvester, 6 row, 24” row finder, rear steer...............................$13,500 Red River 624N beet harvester, 6 row, row finder, rear steer. ............................$13,500 Artsway 786A defoliator, 6 row, knife scalpers, rear steer............................................$8500 Artsway 786A defoliator, 6 row, rear steer. $4500 Artsway 786A defoliator, 24”, rear steer.....$6500 Red River defoliator. ..............................$1000

USED SPRAYERS

2006 Brandt 1000 gallon.....................$11,000

www.sunriseequipment.biz

1-800-967-3597 — 406-488-3112 2900 West Holly — Sidney, Montana

2008 Yamaha Rhino 700EL....................$8950 2009 Arctic Cat XTX Prowler with front blade. ...........................................................$8750 Woods 3240 batwing mower. .................$9950 Woods S106 ditch bank mower..............$1750 Diamond 72” & 62” mowers.....................$2500 Reman 2600 GS2 display.......................$1650

Trader’s Dispatch, October 2012 — Page B16

Flexible cash rental agreements

FULL SERVICE DEALER Call for all your truck, parts & service needs ALL WHEEL DRIVE

2013 Freightliner 108SD, Cummins ISC 300 hp, 1100 ft/lbs torque, 10 speed manual, 205” wheelbase, Airliner 23,000 rear axle, 33,000 GVWR, 11Rx22.5 tires, 18-ft. steel diamond plate flatbed.................Call for Pricing

2012 Mitsubishi Fuso F160, Fuso 3.0L engine 161 hp, Duonic 6 speed automatic, 151.6” wheelbase, 16-ft. white van, aluminum roof, roll up door, step bumper, 12-14 MPG. Stk#: 325850........... ....................................... $48,500

New 2012 Mitsubishi Fuso AWD with automatic transmission....................Call for Details

2009 Freightliner Cascadia, Cummins ISX 450 hp, Eaton Fuller 13 speed, 3.58 ratio, 234” wheelbase, air ride, aluminum wheels, 275/80R22.5 tires, 72” raised-roof sleeper. Stk#: 364239........................... $76,600

Missoula, MT 5561 Expressway

Authorized Dealer

2007 Freightliner Classic, 70” RR condo sleeper, C15 500 hp, 13 speed, 3.55 ratio, LP 22.5 aluminum wheels, 260 wheelbase, 605,000 miles, new front brakes, 12,000 front, 40,000 rear.$49,675

2006 Freightliner CL120 DDC 14.0L 515 hp, 13 speed, 230” wheelbase, aluminum wheels, new drive tires, 70” condo, 12,000 lb. front, 40,000 lb. rear, 773,000 miles................. $31,900

(406) 728-7600 or (800) 735-6336

Flaman Rental & Sales 1-877-528-8467, Lattin & Sons, Power, Montana 1-406-278-3432, Lattin & Sons, Conrad, Montana

Equipment for rent or sale

• Rent Our New “Vertical Beater” manure spreader • Grain vac • Wishek Heavy disk • Rock rake • Post pounder • Rock picker • 50-ft. Riteway Land roller • Other items available Wishek 742NT 34-ft spring gang disk-Great Condition

Horse and calf shelters by

Fall Clearance Wishek Heavy Disks For Sale

742 NT 34-ft. Heavy Disk 842NT 22-ft. Heavy Disk

By Jim Stordahl, Clearwater/Polk County Extension Service, Minnesota Nearly every week of the year, I receive questions on land rental values. Historically, the guidelines have been relatively consistent on land used exclusively for agricultural purposes. In such areas, historic rental values have typically been from 4% to 6% of the assessed value of the crop acres. (This value can be found at your county assessor’s office.) The fly in the ointment comes in areas where land is also used for recreational purposes putting upward pressure on land values. In these areas, the formula may not apply. Cash rental agreements on farmland are generally the most widely accepted for farmers and landlords. Cash rental agreements are simple, clean, and efficient for both the renter and landlord. This is especially true when the renter has multiple landlords. The common alternative, the crop share arrangement, adds additional layers of complexity for the renter, especially when the renter operates multiple tracts of land from multiple landlords. The cash rental agreement is also attractive to the landlord because he/she can plan on the certain level of revenue without the worry of unfavorable weather or crop prices. Indeed, many landlords are retired farmers and may have had enough of the uncertainly of crop production. Honeymoon level grain prices increases competition from “traveling” farmers leaving many long-standing renters trying to make difficult financial decisions at contract renewal time. Does one try to match the opposing cash rent offer -- which often seems impossibly high -- or let the land go? Perhaps there’s another arrow in the quiver worth consideration. In essence, flexible cash rental agreements are a floating value that is typically based on two factors, price and yield. Typically, this floating amount has upper and lower limits – which should be equal. For example, if the normal cash rent is $75/acre, a flexible cash agreement may float as high as $100/acre or as low as $50/acre. Rental rates in your area may be different from this example, but you get the idea. Plus, the set points may be as close or far apart as agreed upon and should depend on the risk and reward desired. Advantages of Flexible Cash Leasing Financial risk is reduced for the farmer if the cash rent is lowered when revenues are low. Conversely, the landowner will share in economic “windfalls” if the rent is adjusted upwards when above-normal revenues are realized, and if the arrangement qualifies for sharing farm program payments. There is less communication and joint decision making than with a typical crop-share lease, which may have possible social security and income tax advantages for the landlord. Flexible cash rent may better meet the objectives of the landlord and tenant than cash rent, particularly if the landlord is willing to share the risk and the tenant is interested in reducing risk. Properly designed flexibility will reduce the need for frequent renegotiation of cash leases. Disadvantages of Flexible Cash Leasing The landowner has more financial risk than she/he would with fixed cash rent. However, if there is greater risk, there should be the potential for greater reward. Most of these agreements are based on price and yield; the landowner will need to trust the tenant to accurately measure production - similar to a crop-share lease. The renter will typically share some of the “economic windfalls” from above-average years. There is a price for reduced risk. Because flexible cash leases are not widely used, thus people are often unfamiliar with them. Farm program payments may need consideration, adding another layer of complexity. With multiple-crop enterprises, such as wheat and soybean, arriving at an adjustment trigger price and/or yield for two or more crops is more complicated. The initial agreement is more difficult and time consuming than conventional lease agreements. Scheduling payments can be complicated under a flexible cash lease. For example, with a two-payment agreement, if the total rent calculated at the end of the year is less than the first installment, is some of the first installment refunded or is no additional payment made? If the first installment is non-refundable, it, in effect, becomes the minimum cash rent. Summary While conventional cash leases may be rather “generic” in nature, the flexible cash lease is often more of a “designer” continued on page b17

Arborvitaes dying

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a row of 25 to 30 arborvitaes. In early spring, one started turning brown and then turned completely brown. I trimmed the dead branches that I could reach. In the last few weeks, the arborvitae on each side of the first one also started to turn brown in various spots. I’ve looked for worms and insects, but I haven’t found any. Is there anything I can do to stop whatever it is from working its way up and down the line of arborvitae? A: This is a problem that can only be addressed by an onsite diagnosis. I suspect a canker development on the dying branches or some borer activity. Contact the Penn State University Extension agent where you live. To find someone, go to http://extension.psu.edu/counties. In all likelihood, the agent will look at the planting in your yard or request that a sample be sent to the diagnostic lab for analysis to give you accurate recommendations. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Flexible cash rental agreements continued from page b16

type of lease. It is most beneficial to the parties involved when it is designed around their objectives on which the landowner and the farmer mutually agree. To be successful, there needs to be deliberate involvement and negotiation by both parties. However, the landowner and tenant who are willing to work together in designing a flexible cash lease, and then refine it over time, may have considerably more opportunity to satisfy their objectives than they would with fixed cash rent. For more information, contact me at 800-450-2465 or stordahl@umn.edu.

Trader’s Dispatch, October 2012 — Page B17

Price Truck & Equipment 8005 Hwy. 10 West - Missoula, MT

(406) 543-0382

1995 Ford F450 diesel, 5 speed, 3200# crane, hydraulic driven air compressor and Miller 225 welder with leads... ..................................$13,500

1999 Haulin 31-ft. flatbed (expands to 34-ft.), telescopic hitch and air brakes. Good for round bales ..............$10,000

1997 Trailmax 20-ton pintle hitch trailer, 24-ft. bed..........$11,500

1999 Ford F550 4x4 service truck, diesel, automatic, 5000# crane, hydraulic driven air compressor, 200 amp welder........................$20,000

2001 Ford F550 4x4 flatbed diesel, 6 speed manual transmission, boxes...........$15,000 Cat 930 wheel loader with cab $25,000

Yale 4000 lb. propane forklift..................................................... $4000 Pettibone telescopic 8000 lb. forklifts..................................... $15,000 Rough terrain 7000-8000 lb. forklifts.........................$7000 to $9000 1990 Liftall 30-ft. 8000 lb. rough terrain forklift, side shift, Cummins.$9000 1990 Liftall 6000 lb. rough terrain forklift, side shift, Cummins...$9000 Champ 7000 lb. 21-ft. forklift, diesel, side shift, 8-ft. forks......... $7000 Alitec PH60 asphalt grinder for skid steer................................ $7500 Case Maxi Sneaker C trencher/cable plow with Kubota diesel, boring attachment, shows 512 hours............................................. $7500 Ditch Witch 400SX cable plow with trencher............................ $5000 1999 Ditch Witch 410SX cable plow with boring attachment... $7500 Ditch Witch 350SX cable plow.................................................. $5000 2003 Ford F550 service truck, V-10, auto, 3200# IMT crane.$15,000 1997 Ford F800 service truck, 8.3 Cummins, 9 speed, 5000# IMT crane................................................................................ $15,000 1994 Ford F600 service truck, diesel, 5+2 speed, 6200# IMT crane, compressor, hydraulic outriggers..................................... $12,500 1985 Ford F700 4x4 service truck, IMT 5000 lb. crane, underhood air compressor, outriggers.................................................... $15,000 1985 Ford F600 service truck, diesel, 5/2 speed, 8000 lb. Auto Crane, compressor.......................................................... $11,000 1994 Ford LN8000 60-ft. bucket truck, 8.3 Cummins, automatic, Reachall bucket..................................................................$15,000 1989 International 41-ft. bucket truck, diesel, automatic....... $10,000 1989 International S1754 DT360, 5/2 speed, Altec 300 bucket.$7500 1987 Ford F800 40-ft. bucket truck, diesel engine, automatic... $6500 1990 Ford L8000 diesel, 6 speed, 16-ft. flatbed dump............. $8000 1988 Ford L8000 diesel, automatic, 14-ft. flatbed dump........... $8000 1981 International 4x4 dump truck, low miles....................... $12,500 16-ft. flatbed dump with hoist..................................................... $3500 1997 Ford F800 crew cab truck, diesel, 9 speed, 5000 lb. crane, welder, grease reel and pump.......................................... $15,000

(800) 779-3660

1995 Ford F450 bucket truck with 460-V8, automatic, 32-ft. Telsta bucket.................$7500

1992 Ford F800 service truck, diesel, 9-speed, 5000# IMT crane, hydraulic outriggers, Miller Air Pak welder.$15,000

1999 GMC 60-ft. bucket truck, Cat diesel, 7 speed....$17,500

2001 International 4900 with DT466, automatic and 50-ft. Versa-Lift...................$17,500

1986 Ford F800 National 228 37-ft. crane 14-ft. dump bed... $10,000 1992 Ford F800 12-ton line truck with diesel engine, automatic, 45-ft. crane, 18” auger, pole grabber......................................... $10,000 1999 Ford 550 diesel, automatic, flatbed with lift gate.............. $9000 1996 Chevrolet Kodiak Cat diesel, 6 speed automatic, utility bed, outriggers............................................................................ $8500 1989 Ford F450 utility truck, 11-ft. bed, 460 hp, automatic....... $2500 2001 Ford F550 4WD diesel, 6 speed manual, 11-ft. box van.$15,000 1996 Chevrolet Kodiak Cat diesel, 7 speed, 22-ft. van with insulation blowing machine................................................................. $6500 1988 Internatonal 1800 2-ton diesel 4x4 flatbed...................... $9000 1987 International cab and chassis, diesel, automatic, 160 CFM driveline compressor........................................................... $6000 1986 International 4x4, cab & chassis, DT466, 5/2 speed transfer case, front winch, PTO, hydraulic pump. Ex-utility truck... $12,500 1978 International 1600 4WD, cab and chassis, gas engine, 4 speed, 2 speed transfer case, low miles. Ex-government... $5000 1979 GMC chip truck................................................................. $6500 1981 International S1800 4x4 flatbed, 14,000 lb. knuckle boom.$12,500 1996 International 4900 DT466 engine, 10 speed................ $12,500 1995 International 4900 466, 5 speed, 18-ft. flatbed dump......$12,500 Waterous fire pumper, 175 gpm, 125 psi, 300 gallon tank, 11-ft. Reading utility box............................................................... $5000 12-ft. flatbed, 3200 lb. IMT crane, air compressor...................... $5000 125-275 CFM air compressors.....................................$4000 - $7500 1999 Tow Master 20 ton flatbed, 24-ft. deck, 5-ft. ramps, air brakes.$10,500 12-ton 22-ft. tilt bed trailer.......................................................... $6500 (11) 20-ton 24-ft. tilt bed trailers.................................$7500 - $11,500 1-ton utility beds, starting at...................................................... $1000 Miller 250-400 amp diesel welder................................$1500 - $2500 Brush Bandit chipper............................................................ $11,000 2 ton dump boxes, each............................................................ $1000 Buckets for skid steer loaders........................................................Call Forklift forks...................................................................................Call Cat IT28 quick-tach forks.......................................................... $2750 Auger bits, 18” and 30” with 21/2” square shank.............$750 & $1000 Versatile 35-ft. bucket attachment............................................. $3000

2012 Model Year Clearance Discounts, Rebates, Low - Low APR

2012 Ford Edge Limited AWD, 3.5L V6, automatic, heated leather, 19,000 miles, warranty. .......................................................... $30,495

2012 Ford Escape Limited 4x4, V6, automatic, dual power heated seats, moon roof and more, 22,000 miles, warranty...................... $23,495

2010 Lincoln MKS AWD, 3.7L V6, automatic, heated/cooled leather, satellite radio, sync and more, 17,000 miles, warranty............ $27,995

2004 Ford T-Bird coupe, V8, automatic, hard top, only 45,000 miles, very clean...... $19,900

2008 Chevrolet Express 1500 4x4 passenger van. Has miles but looks and runs good......... ............................................................. $9495

2012 Lincoln MKZ 3.5L V6, automatic, heated/ cooled leather, 22,000 miles, warranty........... .......................................................... $27,995

2008 Ford F150 Lariat supercab 4x4, 5.4L V8, automatic, leather, new tires, 116,000 miles, good condition................................... $17,495

2011 Ford Taurus SEL V6, automatic, sun roof, 24,000 miles, warranty....................... $21,995

2011 Lincoln MKZ 3.5L V6, automatic, heated/ cooled leather, moon roof, 15,000 miles, warranty................................................... $25,495

2012 Ford Edge Sport 4x4, 3.7L V6, automatic, heated leather, navigation, much more, 13,000 miles, warranty...................... $34,495

Courtesy

Leader in Price, Selection & Service

2013 Titan bumper hitch 20-ft. utility flatbed trailer, 6000# tandem axles, 2-ft. stationary beavertail.............................................. $5995

2012 Titan 10-ft. bumper pull dump trailer, tandem 6000# axles, 2 way spreader gate..... ............................................................. $7795

We advertise our best Cash-No Trade Prices - Trades figured from Retail - * Includes Factory Incentives

Ford

514 South Main, Conrad, MT – 406-278-5533 or toll free 1-800-833-1813 – www.courtesy-ford.com

Trader’s Dispatch, October 2012 — Page B18

BeefTalk: Buy feed by value, not pounds

The struggle for sourcing feed continues as cattle producers evaluate current and future feeding options. Even though the culling is deep, there still are cows left to feed, so now is the time to call a good beef cattle nutritionist. The market is redefining “least cost” feedstuffs, so producers must review all the options when purchasing feed. The nutrient value of feed is what drives value and performance. However, knowing when and how to feed also is important. I am reminded of a case where the producer struggled with lower-quality grass hay during calving because he fed the higher-quality hay during midgestation. The producer did not understand the different cattle nutritional requirements at different stages of life and when to feed the lower-quality versus the higher-quality feed. Such misallocation of feed inventories can be financially fatal, especially when all feedstuffs are overpriced. So, this is a good time to go see the doctor. When I visited with Chip Poland, chair of the Dickinson State University Department of Agriculture and Technical Studies and a welleducated beef cattle nutritionist, the first thing Poland noted was to encourage producers to default back to the basics. “We feed nutrients, not pounds, which is a tough concept to get across because we physically see pounds,” Chip says. He went on to note, after a few local phone calls, that producers are paying $6.88 to $8 per bushel of corn from other producers. However, local elevators are buying corn in southwestern North Dakota at prices ranging from $7.60 to $8.50 per bushel (late July). What this means is that cattle producers can buy corn at the local elevator, but pay a price markup.

By Kris Ringwall, Beef Specialist, NDSU Extension For example, one local elevator was buying corn at $7.20 per bushel, but selling corn at $7.94 per bushel. This particular price quote equates to approximately 18 cents per pound of total digestible nutrients (TDN) for corn being purchased by the producer. In comparison, mixed grass hay at $100 per ton, plus $25 per ton transportation costs, (20ton loads, approximately 100-mile haul), would be priced at roughly 13 cents per pound of TDN. If the same hay was $150 per ton, plus $25 shipping, the price per pound of TDN would be just less than 18 cents per pound of TDN. Interestingly, 55 percent TDN mixed grass hay at 90 percent dry matter competes with corn in these higher-priced corn markets. Likewise, if a producer purchases $200-per-ton alfalfa hay, plus pays the same $25 shipping at 60 percent TDN and 90 percent dry matter, the cost would be just more than 20 cents per pound of TDN. The form that one buys feed in is price-dependent. Using Chip’s example, with both corn and hay priced high, there still are options as to how a producer obtains the energy and other nutrients that a cow needs. Chip went on to note that “hay was competitive if there are reasonable shipping costs. However, as transportation costs increase, and if one figures waste, that may or may not be true. I can feed corn with minimal waste while storing and feeding round bales of hay, but one should factor into the price approximately 10 percent as waste.” The form the feed is in greatly impacts the capacity of a producer to control waste. “Think about the comparison that was presented here, which is to hunt and peck to find hay that is reasonably priced and

The weather continues to make life interesting. I am tempted to say the weather makes life difficult. If that were true, life always would be difficult because, as long as the Earth spins and continues its rotation around the sun, the weather never will be uninteresting or constant. In fact, if the weather quit changing, that would mean the Earth stopped rotating. At that point, we could rightly say that life is difficult. Sorry if a bit of reality is hard to swallow, but farming and ranching have been and will continue to be a game of chess between Mother Nature and a producer. Because Mother Nature is unwilling to take any advice, all the preparation and planning rests on the shoulders of the producer. Currently, the drought or excessively dry weather card has been played. Although the scene is very similar to previous droughts, driving across lifeless, parched land is discouraging. As summer comes to a close, the first step is to establish an inventory of our cattle, remaining pasture availability, carryover hay and potential hay production. The ability to survive will be measured by a producer’s ability to balance cattle inventory with feed inventory. Given that feed purchases may need to be made, each purchase comes with an obligation to commit money with the expectation that those funds will be paid back in future cattle revenues. This is step one and is the most important point to the whole discussion of buying feed or selling cows. If no short- or long-term profit can be penciled in, then step two needs to happen. That is tough but life is tough, and living in denial only makes life tougher. Regardless, the summer growing season is departing and fall decisions will need to be made.

Step two is to evaluate and adjust cattle inventories. In other words, now is the time to cull those extra market cows and bulls. The culling needs to be deep. However, culling deep is not a new concept to seasoned cattle producers. Times change and, with that change, stocking rates and feed resources change as well. As a reminder, those changes in inventory should start with a no-excuse mind-set. All open or structurally unsound cows need to go. Even though the cows were evaluated last spring, now is the time to pregnancy check and evaluate for summer injuries that only will become major as time goes on. In addition, look for cows that are dry, even though they were sent to pasture with a calf at side. Calves have a way of finding milk, even if their own mother was not the source, so poor mothers must go. Wild mothers also must go. In high-cost years, do not gamble on marginal cows because some will be marginalized with winter and their value lost. Be critical of late-calving cows and develop some packages of bred cows that do not match your desired calving time. For example, sell the younger cows that did not calve in the first three weeks of the calving season. One realizes that these late-calving cows will not produce as heavy of a calf. Allow for the retention of super-productive 5- to 8-year-old cows, but get those old cows (9 and older) gathered and packaged for sale. This fall is going to be difficult for many producers because input prices have translated into higher costs and the margin for error is gone. Simply keeping a balance

then haul it to the ranch versus buying corn off the shelf,” Chip says. Regardless of what feed is being purchased, hauling and transportation costs are critical. “What would corn cost if we looked at the source and moved it in unit volumes?” Chip says. “The local elevator publishes prices for corn and other grains, but it still needs to be delivered to the ranch. So, regardless of feed source costs, the final decision more than likely will depend on transportation cost per mile times the number of miles hauled. Local sources are always better. Therefore, in a very simple scenario, we see that high-priced corn may not be as costly as it would appear. Conversely, hay may be the feed of choice at times.” This analogy, along with numerous other examples of shopping around for feedstuffs, is required of producers this year if one is producing cattle in areas that are short of feed. Not only is the basic ingredient missing, but all the costs continue to escalate. Producers need to seek good information, and keep in mind, the answer will be different for each location and producer. Again, producers need to price nutrients, not pounds of feed delivered. To do that, producers need to seek the help of a very sound, welleducated, beef cattle nutritionist.

BeefTalk: Tough decisions but cattle must pay for themselves

is not going to be enough. The value of the calf must be greater than the value of all inputs, including purchased feed. As producers monitor costs, it does not take long to realize what is eating and utilizing the ranch or farm resources also needs to be monitored. If one needs to go deeper, keep in mind that a cow reaches her prime at age 5, so 5- to 9-yearold cows have excellent value as breed cows and provide the maximum opportunity to produce big, high-valued calves. Even though the producer may not get the rewards of the good breeding values, the cows should catch the eyes of those with feed at a well-advertised bred cow sale to help put some needed cash back into the operation. There is no way to make old cows young, and young cows soon will be old cows, so the bottom line is to sort the most productive cows and sell the rest. The financial world has been, is and always will be tough. Forgiveness is not commonly used as a financial term, so cows must bring a positive cash return. May you find all your ear tags.

Trader’s Dispatch, October 2012 — Page B19

AG TRUCKS and EQUIPMENT Visit our website: www.agtrucksandequipment.com

Phone Dave Bell 406-899-7530 or Steve Raska 406-788-5361 – Great Falls, MT

Simplicity, Dependability, Capacity

DON’T FORGET!!!

We are also a Trimble sub-dealer for Triangle Ag-Services of Fort Benton, Montana

Like new, 1 year old, Ag Trucks SS 1280 spray system, SS 1280 tank, 90-ft. aluminum boom, 7 boom sections, rinse tank, cone, load sense hydraulics. Call soon

AG TRUCKS SPRAY SYSTEMS

2013 International 7400, 330 hp, automatic, auxiliary transmission, field cruise, SS 1600 gallon tank, 90-ft. steel booms, 4-pt. linkage boom mount, full load sensing hydraulic system with front mount pump, high rise front axle, hydraulic steering, Trimble 750, Field IQ, EZ Pilot, Raven boom height

Give us a call about your application needs.

Truck Sprayers/Pull Types/Spreader Boxes and Carts/Small Sprayers along with Trimble and Raven Products.

Near New!!

2011 Fast 1800 gallon, 120ft. boom, duals, rinse tank, only one season, less than 200 hours, Raven boom height available. Big Savings!

Brand new 255/70 R 22.5 tires and wheels.

These are brand new “take-offs” removed from new truck shassis. Call now and save!!

OUR DANCE CARD IS BEGINNING TO FILL UP! If you are looking for a new sprayer or fertilizer system for this spring, get your order in soon to guarantee a new system in the spring. Give Steve or Dave a call.

Trader’s Dispatch, October 2012 — Page B20

Simonsen Spreaders in Stock

• Simonsen Spreaders offer the highest return on investment of any equipment you can own. • Organize your own time, spread your own, on your own schedule • Simonsen — Accurate / Economical / Simple

“Get yours now for spring application”

New 2013 International 7500 Floater Chassis Arriving Soon - Just give us a call! FULL LINE OF TRUCK MOUNT SPREADERS WITH ANY OPTION NEEDED

Simonsen Equipment In Stock:

New 8-ton SS hydraulic drive, variable rate pull type carts with Raven controllers. New 8-ton SS ground drive spreader carts with spinner tach. New 8-ton SS Q Model truck mount spreader box.

“Top and Side Tenders Available in Any Configuration”

VECTOR 350 CHASSIS

350 HP CUMMINS, Allison automatic, mechanical 4WD, planetary axles, deluxe ag cab, stretch frame, row crop or floaters.

CALL US

NELSON AG FLOATER CHASSIS Nelson Ag built the vast majority of the LORAL Chassis’ known throughout the industry as being extremely tough and dependable. 2012 International 7500 350 hp, Allison, 2 speed auxiliary transmission, planetary rear axle

r loate F g wn on A Nels ssis sho 13-ft. cha onsen Sim box with Model R

AG TRUCKS and EQUIPMENT Visit our website: www.agtrucksandequipment.com

Phone Dave Bell 406-899-7530 or Steve Raska 406-788-5361 – Great Falls, MT

Trader’s Dispatch, October 2012 — Page B21

1997 International 2554, with New Sprayflex 1500 gallon / 90-ft. booms “Let Us Build One For You”

Sprayflex Sprayers

• 1000-2000 gallon poly or SS tanks • 80-ft.-130-ft. boom widths • New poly tank configuration • Extremely resilient boom design • Load sensing hydraulic system In Stock - New Sprayflex 1500 gallon, 120-ft. boom

FIELDSTAR 2000

Ag Trucks

can help you with any aspect of your truck sprayer project.

• Mounting • Fabrication • Truck Selection • Gearing • Tires and Rims • Hydraulic • Electrical • GPS and Controllers

FIELDSTAR 1450

2000 gallon SS tank

1450 gallon SS tank

FIELDSTAR 1500

International 7500 400 hp, Allison automatic, tandem rear tires, with Sprayflex 3150 gallon stainless steel tank, 150-ft. booms.

1997 Freightliner FL 70 Cummins, Allison automatic, new...yes new, planetary rear axle, new tires, hydraulic steering. Very nice condition and runs great.

1500 gallon poly tank

2002 International 8100 1250 Marflex - 120 ft. boom 300 hp Cummins 3-year-old spray system high-rise front axle hydraulic steering Trimble 750 / EZ-Pilot 2 sets of tires.

Priced Right - Call Now!

New Sprayflex Sprayers on Order, Call and Reserve Yours Today

AG TRUCKS and EQUIPMENT Visit our website: www.agtrucksandequipment.com

Phone Dave Bell 406-899-7530 or Steve Raska 406-788-5361 – Great Falls, MT

Trader’s Dispatch, October 2012 — Page B22

WINTER SERVICE SPECIAL Save time and money by getting your machinery ready this winter

Detailed on Farm Combine inspections Call for Details

This program includes: 10% Discount On Service 5% Discount On Parts 50% OFF Hauling

Receive a free Hoven Equipment Jacket with purchases over $2000

Call today!

406-727-7153

4181 North Park Trail - Great Falls, MT

“Our service sets us apart” Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

Hoven Equipment

Massey Ferguson® Compact Tractors 406-727-7153

4181 North Park Trail Great Falls, MT

New

Low Rate Financing or Cash Discount or Free Attachment Contact Hoven Equipment for Complete Details

Loadout Augers

Loader mover assembly Specials – Call for Details

Hoven Equipment

Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

406-727-7153 Great Falls, MT Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

New Augers – IN STOCK

New

CFR650 Round Bale Processors Complete feed system with the Patented Feed Chopper™ & “Metered Grain Insertion System™”

• Place processed feed in a windrow in the field. • Place processed feed in a bunk. • Spread bedding bales up to 50 feet for an even and lofty spread. • Process one bale while carrying another on the forks. • Loading a bale is a one person job from the tractor cab. • Unrolls and processes round bales with PTO-powered flails. This process blows away mold, dust and mildew. Feed is more palatable and reduces lung and digestive problems in cattle. USED BALERS

After Season IN STOCK Sale Call for your Twine and Net Wrap needs

406-727-7153

4181 North Park Trail Great Falls, MT

Hoven Equipment

Hesston 565A round, mesh wrap......$12,900 2-Hesston 565A round balers. Each.....$8900 Case IH RBX562 round baler, twine & net....... .......................................................$18,000 Vermeer 555XL round baler, 5x5 baler, twine only.................................................$14,900

www.hovenequipment.com

Challenger LB34B 3x4 square baler with accumulator........................................$85,900 Hesston 7434 3x4 square baler with roller chute...............................................$74,900 Case 8555 16x18 square baler......................... ........................................... JUST TRADED Massey-Ferguson 1835 14x18 square baler... .............................AVAILABLE IN SPRING New Holland BR780A round baler... JUST IN 2-Hesston 956A round balers. Ea......$19,900 2-Hesston 856A round balers. Ea.....$14,900

USED HAYING EQUIPMENT

8x36 8x41 10x70 13x70

CONSIGNMENTS Case IH 1680 combine with 30-ft. header......... ........................................................ $45,000 Gleaner R60 combine with pickup header & 36-ft. MacDon 960 header............... $25,000 White/Gleaner 2662 combine, 30-ft. header with Cummins engine............................. $44,900 John Deere 7700 combine.................. $10,000 White header, 15-ft..................................CALL Massey-Ferguson 8560 combine, 24-ft. header............................................. $28,000 Case 8840 swather........................ COMING IN 2-Universal II 25-ft. pickup reels. Each... $2500 MacDon 9350 swather, no header...... $39,900 MacDon 9000 swather, 14-ft. header... $27,900 Hesston 8450 25-ft. shiftable draper head, 14-ft. auger head, header trailer............... $55,000 Hesston 6400 swather with 20-ft. draper header and 14-ft. auger header...................... $8000 Versatile 400 swather with 21-ft. header..$6000 2003 Hytrux with 90-ft. F&S sprayer... $37,000 Brandt 90-ft. trailer sprayer..................... $8500 Bean sprayer, 300 gallon, 100-ft. hose reel.$1250 New Holland 9030 bidirectional tractor..$30,500 John Deere 4020 2WD tractor with loader, cab, 3-pt., PTO........................................ $10,000

Ford 800 tractor with loader.................... $3995 1116 BF adapter conditioner fits 9030 bidirectional................................................... $2000 John Deere 270 skid steer.................. $19,900 John Deere 1900 disk drills................ $79,000 Concord 1100 24-ft. air drill with Concord tow between cart................................... $18,900 New Holland 580 16x18 square baler... $9900 New Holland 1030 pull-type balewagon..$6000 Case IH RBX562 round baler, twine... $14,900 John Deere 566 round baler, twine only........... .......................................................... 14,900 Neuer 8120 grain vac............................. $5000 Westgo 8x31 PTO drive auger............... $2250 GT 8x40 grain auger, PTO drive............... $990 Westfield D1606 drill fill........................... $650 1965 Dodge truck with hoist, V-8, 5 speed transmission....................................... $2000 40-ft. tandem axle gooseneck lowboy..$18,900 1996 Eagle tandem dually pintle hitch flatbed, 6-ft. beavertail..................................... $9000 DuAl loader............................................. $1500 Melroe 516 19-ft., 3-pt. duckfoot............. $1500 Case 10 sickle mower............................... $800 Ford 5-ft., 3-pt. rotary mower.................... $500

New Danuser & Wheatheart Post Hole Diggers

Apache AS715 self-propelled, 750 gallon, 90-ft. booms........................................... $130,000 Agco 7650 90-ft. Spra-Coupe........... $124,000 Melroe 220 Spra-Coupe...............COMING IN

Most all sizes on hand

406-727-7153

“Our service sets us apart” Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

www.hovenequipment.com

USED AUGERS & GRAIN DECK

NEW Post Pounders IN STOCK

Wheatheart 13x80 auger.......... JUST TRADED Farm King 10x80 swing hopper............ $10,900 Farm King 13x70 auger........................ $10,500 Farm King 13x70 swing hopper auger with power hopper mover.................................... $10,000 Farm King 13x70 swing hopper............ $10,000 Farm King 10x36 PTO............................. $4500 Westfield 13x70 swing auger................ $10,500 Westfield 13x70 swing auger................ $10,000 Alloway 10x71 swing hopper................... $3300 Alloway 10x61 swing hopper auger......... $3000

Lawn Mowers - IN STOCK

Now Accepting WASTE OIL

Morris 881 Hay Hiker....................... $17,900 H&S HN7A hay machine......................... $4900 New Holland 1032 pull type balewagon..$6900

4181 North Park Trail - Great Falls, MT

USED SPRAYERS

Hoven Equipment

406-727-7153 4181 North Park Trail Great Falls, MT

Trader’s Dispatch, October 2012 — Page B23

New Gleaner S77 - IN STOCK

Built with farmers in mind The machine offers all the nimbleness of our prior R Series with a significant increase in capacity and capability. For those farmers who want all of the preformance without all the bulk, we present to you our latest innovation: the Gleaner Super Series. USED COMBINES

Gleaner Super 77 with chopper & chaff spreader, auto-steer...................... $249,000 Gleaner R72........................................ $35,000

Gleaner R72 combine......................... $49,000 Gleaner N6 combine.............................. $9900 Case IH 2388 25-ft. 1010 header, 1015 pickup header.................................................CALL Case IH 1660 combine with 24-ft. header, 13-ft. pickup header with attachment........ $19,000

406-727-7153

4181 North Park Trail - Great Falls, MT

“Our service sets us apart” Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

Come in and see our new lineup

www.hovenequipment.com

Massey Ferguson® 7600 Series Tractors

NEW Vermeer BPX9000 Bale Processor

140 - 180 hp

More Power. More Choices. More performance.

Process both Round & Big Square bales The all-new BPX9000 Bale Processor combines simplicity, durability and versatility to meet the needs of today’s cattle producers. The easy to operate machine is built tough with a unique, T-style frame, the bed design and offset rotor produce even and consistent feed with minimal maintenance, and an optional large square bale kit includes enhancements to effectively process a variety of bales. The BPX9000 is built to maximize bale processing and minimize operator stress.

USED HEADERS

MacDon 25-ft. draper header, fits 7000 & 9000 Series............................................ JUST IN 1996 MacDon 920 14-ft. hay header..$14,000 1993 MacDon 920 14-ft. hay header..$13,000 MacDon 871 adapter.............................$1000 Gleaner 327 27-ft. header with batt reel..$7900 3-Gleaner 15-ft. N-series pickup headers with Victory 7 or 8 belt attachment. Each.$5900 Gleaner 324 24-ft. header with batt reel..$1500 30-ft. bat reel off 8570 header.................$799

USED MISCELLANEOUS

NEW Universal U2 25-ft. pickup reel fits New Holland 72C, 73C & 74C and International 2010 & 2020 headers........................$4250 Walinga 7614 grain vac.........................$9900 Degelman 12HD dozer..........................$4500

406-727-7153

4181 North Park Trail - Great Falls, MT

USED PROCESSORS

Vermeer BP8000 processor, right hand discharge............................................$14,500 Highline 6800 processor....................... CALL Highline 6600 round bale processor.....$8900

USED WINDROWERS

Case IH WD1203 windrower................. $79,900 Westward (MacDon) M100 self-propelled, no headers............................................ $69,000 MacDon 9000 14-ft. header.................. $29,900 Case IH 8830 21-ft. draper header....... $19,900 Hesston 8100 swather with 25-ft. draper header, double swath......................................CALL Hesston 1360 13-ft. rotary disc, hydro-swing.... . .......................................................... $9900 Hesston 1270 hydro swing........JUST TRADED Hesston 1170 pull-type hydro swing....... $8900 Kuhn 500 rotary disc mower................. $14,900 Case IH SCX100 mower conditioner..$17,351 Case IH 8370 hydro-swing...................... $7900 John Deere 945 14-ft. rotary disc MoCo.$13,900 John Deere 930 11’6” pull type disc mower.$7900 New Holland 1116 14-ft. header with push frame for bidirectional.................................... $4500 “Our service sets us apart”

Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

Welcome to the next generation of mid-frame row crop tractors with a completely redesigned cab, generation 2 SCR technology, the industry leader in emissions control, and all new family styling. The 7600 Series features the choice of the exclusive Dyna-VT™ CVT (continuously variable transmission) which provides infinitely variable speed control from supercreep to transport speed without shifting, jerking or a delay in traction or power, or the industry unique 24F/24R Partial Powershift with exclusive features like pre-set cruise speeds and standard Autodrive. Together, with the upgraded cab, emissions system, and choice of transmissions, the 7600 Series combines into the perfect tractor for any job around the farm or the field.

• Customized comfort. Tough enough for any job. • Transmissions with the most efficient power transfer in the industry. More productivity at the touch of a button. • Less time spent refueling, more time spent working. USED TRACTORS & SKID STEER Challenger MT555B MFD, 130 PTO hp with loader............................................... $79,900 Steiger 210 4WD tractor..........................CALL Versatile 400 articulated 4WD.................CALL Ford 7700 2WD tractor with loader & grapple.. .......................................................... 15,900

COMING IN

Versatile 850 4WD tractor. Versatile 950 4WD tractor. Flexi-Coil 2320 tank with 5000 45-ft. air seeder, 12” spacing. Flexi-Coil 3850 tank with 5000 51-ft. air seeder, 12” spacing.

USED AIR DRILL

Morris 39-ft. air seeder with 10” spacing, 7180 tow between tank............................. $39,900

Case IH MXU110 MFD, loader, bucket, grapple.................................................... $49,900 Case 1570 2WD tractor....................... $10,800 Allis-Chalmers 185 2WD, 3-pt., PTO..... $5500 Bobcat 873 skid steer......................... $17,900

USED CONVENTIONAL DRILL

John Deere 9450 drills, 30-ft., transport......... .......................................................$15,900 4-Morris MH300 10-ft. grain drills with 12” spacing, transport.....................................$6000 1-4-drill hitch for JD 9350, 10-ft. drills.

406-727-7153

4181 North Park Trail - Great Falls, MT

“Our service sets us apart” Ken – Cell, 788-4588; Sean – Cell, 899-0889; Ed – 231-4254; Rick – 231-9898

www.hovenequipment.com

Trader’s Dispatch, October 2012 — Page B24

Longtime animal science professor Klopfenstein honored

Longtime University of Nebraska-Lincoln (UNL) animal science professor Terry Klopfenstein was honored with two of his profession’s most prestigious awards this summer.  Klopfenstein, professor of ruminant nutrition, received the American Feed Industry Association’s New Frontiers in Animal Nutrition Award from the Federation of Animal Science Societies and received the Cattle Feeders Hall of Fame Industry Leadership Award. “These are very significant honors that speak to Dr. Klopfenstein’s dedication to the beef industry in Nebraska and the nation,” said Larry Berger, head of UNL’s Department of Animal Science. The Federation of Animal Science Societies cited Klopfenstein’s “pioneering and innovative research relevant to the nutrition of animals that benefits mankind and the nutritional value of foods from animals.” The award presentation was made in July during the annual meeting of the American Society of Animal Science. The Cattle Feeders Hall of Fame Industry Leadership Award goes to advocates “who have demonstrated outstanding leadership, provided exemplary service and have made significant contributions to the advancement

of the cattle-feeding business.” “Terry’s passion and dedication to education and the beef community can been seen in his years of service and contributions to advancing our industry,” the Cattle Feeders Hall of Fame said in announcing the award. “Terry is considered to be one of the most productive animal science pioneers. Fortunately for the cattle-feeding community, he is still committed to the future of cattle feeding.” Klopfenstein was honored alongside other recent inductees including Paul Engler, Kenneth Monfort and Ladd Hitch. Klopfenstein is an internationally respected scientist and teacher. He has mentored over 150 graduate students throughout his 45-year career, many of whom are recognized themselves now as excellent nutritionists. Other students have credited Klopfenstein’s successful feedyard internship program as the springboard for their careers in the beef cattle business. Klopfenstein’s tenure at UNL started in 1965 after he completed his bachelor’s, master’s, and doctorate degrees from The Ohio State University. Klopfenstein held the University of Nebraska Wagner Professorship from 1989 to 2007.

Montana 4-H’ers selected for MSU bioscience project

Thirty 4-H members from throughout Montana have been selected for BioScience Montana, through which they will conduct scientific research, learn about bioscience-related careers and collaborate via distance learning technologies. The intensive yearlong experience is funded by the National Institutes of Health as a Science Education Partnership Award given to Montana State University. BioScience Montana combines hands-on science with distance learning technologies to offer students experience in research with the aim that science uses that knowledge to solve problems and improve quality of life. Students will participate in three modules: neuroscience, infectious diseases and metabolomics. The project kicked off with a weeklong campus experience, when 4-H’ers worked side-by-side with students from MSU and the University of Montana, as well as MSU faculty members Ed Dratz, John Miller and Jovanka Voyich-Kane. The program combines aspects of MSU’s teaching, research and service missions and was developed by MSU Extended University, the 4-H Center for Youth Development, and the MSU Department of Cell Biology and Neuroscience. Participating students come from Cascade County, Lake County, Flathead County, Lewis and Clark County, Ravalli County, Sanders County and Toole County. The Cascade County Team is led by Kathy Dunn, with participants Samantha Morris, Emily Berg, Hayden Broesder and Amanda Melton. Lake and Flathead Counties have a combined team led by Tracey Wheeler, with participants Madisen Wheeler, Natalee Wheeler, Claudia Hewston and Ian Caltabiano. The Sanders County Team is led by Rusty Kinkade and includes students Abby Croft, Josh Wulfekuhle, Logan Naegeli and Tyler Riffle. The Toole County Team is led by Kristi Aklestad, with participants Riley Hellinger, Jacob Aklestad, Grace Aklestad and Hayley Fretheim. Lewis and Clark County has two teams. One is led by Kristina Carlson and Marca Robbin Gibson and includes participants Holt Gibson, Elizabeth Carlson, Logan McNeil and Katie Merchen. A second is led by Crystal Bridges, with participants Katie Bridges Payne, Grace Freeman, Emma Carlson and Christopher Gransbery. Ravalli County also has fielded two teams: One led by Wendi Fawns, with participants Chloe Solorzano, Zach Jones and Star Lange; and another team led by Holly Jones with participants Emily Jones, Alyssa Solorzano and Pamela Fawns.

Native grass seed

By Ron Smith, Horticulturist, NDSU Extension Service Q: I had a septic system installed in Morton County. The area where the septic system was installed was covered with native prairie grass. The soil is sand. Now that the septic system is installed, the area is barren and the sand drifts during windy days. I would like to seed it into a native grass again. What kind of grass seed do you recommend and where can I buy it? How would I spread the seeds? Would a lawn fertilizer spreader work? What could I use to cover the area once seeded to keep the wind from blowing away the seeds? Is there inexpensive netting available? Thank you. A: There are many options to consider. Buffalo Grass can become established using plugs. Mixing the seed with blue grama would be using two native grasses. Turf-type tall fescue would be a singular species that would do the job. Fairway or Ephraim crested wheat grasses are adapted to dry or low-precipitation areas. Western wheatgrass also is a good one to consider because it forms strong rhizomes to cover and hold sandy soil in place. How to apply the seed depends on the type of seed you are using. Hydromulching is the best approach because it holds the seed in place while it goes through germination and establishment. Otherwise, a standard spreader would do the job. You can cover it with decomposing, coarse-weave burlap that is staked in place. Where you would purchase the seed depends on the area to be covered. If it is just a couple of thousand square feet or less, then the local garden centers may have the seed or can order it for you. You might try a farm supply store for larger quantities or even for the smaller amounts. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Superb blueberries from ARS

By Marcia Wood, Agricultural Research Service That interesting shrub growing in a neighbor’s front yard may actually be exactly what you think it is--a somewhat unusual ornamental that produces pink blueberries. These berries not only look pretty, but they’re tasty, too, according to U.S. Department of Agriculture (USDA) scientist Mark K. Ehlenfeldt.   As a plant geneticist with USDA’s Agricultural Research Service (ARS) in Chatsworth, New Jersey, Ehlenfeldt has either developed, or helped develop, a dozen new varieties of blueberries, including “Pink Lemonade.” Although not a first of its kind, “Pink Lemonade” is likely America’s most popular pink blueberry. In 1991, Ehlenfeldt chose the parent plants that later yielded today’s “Pink Lemonade.” Results from his test plots in New Jersey and findings from West Coast evaluations by ARS plant geneticist Chad E. Finn in Corvallis, Oregon, led to the decision to officially “release” this blueberry as what is known as a numbered selection (specifically, ARS 96-138) in 2005, and, in 2007, to name it “Pink Lemonade.” After a new kind, or variety, of plant has been thoroughly tested, “releasing” it typically involves giving it a name, describing its pedigree and other features in a release notice (somewhat like a botanical birth announcement), and making it available to one or more suppliers of foundation plant materials so that commercial nurseries can buy and propagate it for wholesale or retail sale. “Razz,” another stellar blueberry from the Chatsworth program, offers a flavorful surprise: It tastes quite a bit like a raspberry. “Razz” was bred by USDA’s first blueberry breeder, Frederick W. Coville, in 1934, and was chosen for further study during the next decade by USDA and university researchers. Originally regarded as too unusual for its time, “Razz” was later rediscovered, newly tested, then officially released last year. “Sweetheart” is a beginning and end-of-season treat. It produces firm, delectable, medium- to medium-large berries in mid- to late-June, and will also produce a small crop of new berries months later, if the autumn is mild. Ehlenfeldt named and released “Sweetheart” in 2010. Some blueberry fans regard “Cara’s Choice” as the best blueberry they have ever tasted. Ehlenfeldt describes it as a very sweet, medium-sized berry that has a pleasant aroma. This berry can be allowed to remain on the plant for several weeks after ripening. It will continue to sweeten, while enabling growers to extend their harvests over a longer period of time. Former USDA blueberry researcher Arlen D. Draper selected the parents for “Cara’s Choice.” Evaluations by Draper, Ehlenfeldt, and others led to release of “Cara’s Choice” in 2000. Read more about these berries in the current issue of Agricultural Research magazine and in release notices posted at www.ars.usda.gov/Ehlenfeldt.

Red maple trees

By Ron Smith, Horticulturist, NDSU Extension Service Q: I am interested in planting two red maple trees. The trees would get full sun behind my home. The local nurseries here on the eastern shore of Maryland are very eager to sell me anything they think I need. Because these two trees will be used to shade my home, are red maple trees the best choice for my area? If you have any ideas, I would very much like to hear them. I am not a tree expert by any means. When the builder built the house, the first things to go were all the trees. A: A red maple is a beautiful tree, but there are all kinds out there. With trees, we refer to them as cultivars, and each cultivar has particular characteristics. For example, some are more upright and some have deeper red fall color. You need to contact the local University of Maryland Extension Service agent in your county to get proper guidance. Go to http://extension.umd.edu/local/index.cfm and click on your county to get someone to make a recommendation or two for you. Local good advice is better than me giving it to you from a thousand miles away. Get back to me if you have any unresolved questions or concerns. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C1

JIM NIELSEN TRUCK & PARTS, INC.

P.O. Box 3072 • 4075 Wynne Avenue • Butte, Montana 59702 • (406) 494-3394 • Mobile (406) 565-7235

CONTRACTOR’S SPECIAL

1993 International 4700, 16-ft. Omaha scissor-dump body, DTA360 engine, 5+2 transmission, new pump, Budd wheels.

CURRENTLY BUILDING!

1995 International 4900, heavy spec. chassis, DT466 engine, 6+1 transmission, air brakes, good rubber on Budds, 29,000 GVW, low miles, clean truck!

Inventory Available 2012 Knapheide 20-ft. steel grain box and hoist 2003 International 8100 single axle tractor, white 2000 International 4700 chassis, white 1999 Freightliner FL120 tandem tractor, red 1999 International 4900 24-ft. reefer van, white 1999 Chevrolet C6000 single axle, diesel dump truck, 3126 Cat engine, automatic transmission, new rubber. 1999 GMC 3500 HD diesel chassis, white 1996 International 4700 20-ft. van, white 1995 Ford L8000 single axle tractor, 8.3 Cummins, white 1994 International 9200 single axle tractor, orange 1994 GMC Top Kick diesel truck, white 1993 Kenworth T600 tractor, blue 1993 Chevrolet 1-ton service truck, white 1992 Chevrolet Kodiak single axle diesel chassis, white

Currently wrecking 300 trucks! All shapes & sizes!

1990 International 8300 tandem tractor, green 1988 GMC 7000 single axle diesel chassis, white 1988 GMC 6000 Lo-Pro chassis, white 1988 GMC diesel truck, white 1986 Freightliner conventional tandem tractor, white 1986 Freightliner cabover, 24-ft. flatbed, 24-ft. pull trailer 1984 Kenworth W900 15-ft. dump truck, blue 1982 Ford F600 service truck, white 1980 GMC 7000 service truck, blue 1979 International 1800 4x4 cab & chassis (bad motor), orange 1979 International tandem tractor, consigned 1977 International tandem diesel dump, green 1976 Peterbilt 359 tandem dump, maroon 1975 International 1700 18-ft. Omaha flatbed with double hoist, white 1972 International 1600 fuel truck, red 1969 Chevrolet C50 16-ft. flatbed with hydraulic gate, green 1965 International 1890 single axle 10-ft. Heil dump, orange

For Your Seed and Seed Conditioning Needs

Mike DeVries 567-3022

(406) 567-2211 1-800-567-2217

2001 International 4900 tandem, 20-ft. Knapheide grain box, Knaphoist double cylinder, 52” sides, grain & beet gate combo, 87,000 miles, DT466E, 7 speed, air conditioning, excellent shape! Ready to Work!

Semi Trailers

1991 Kentucky 48-ft. tri-axle van 1988 Trail King 40 ton machinery trailer 1951 Spartan 5000 gallon water tank

Special Equipment

2-Omaha Standard 16-ft. grain boxes and hoists Omaha 16-ft. steel flat and hoist, consigned Midwest 7-ft.x8-ft. flatbed for 3/4 ton or 1 ton 7-Van bodies, 12-ft through 22-ft. length, good condition 2- 20-ft. flatbeds and hoists 3- 14-ft. steel beds with hoists (will sell separately) 1100 gallon water tank Dual axle steel 2 horse trailer, brown

Transportation Available Sales lot located I-90 at Rocker interchange

Denton, Montana 3 /2 miles SW - Near Airport

WINTER WHEAT 1

HIGH YIELDING CONVENTIONAL VARIETIES 3 CDC Falcon (WestBred)* 3 Judee (MSU)* 3 WB Quake (WestBred)** 3 Decade (MSU)* 3 Yellowstone (MSU)*

CLEARFIELD VARIETIES

3 AP503CL2* 3 Norris* *Protected under the Plant Variety Protection Act **Requires a Limited Use Agreement through WestBred

Great Falls Area Producers

Quality, Certified Bulk Seed Now Available in Great Falls

Contact Rod at AgriBasics Fertilizer, Inc. Phone: 406-761-4024 4500 18th Avenue North, Great Falls, MT.

Fall Dormant Seeding We Have An Excellent Selection Of

Grass & Alfalfa Seed ON HAND CUSTOM BLENDS AVAILABLE

Sunflowers inspire more efficient solar power system

Trader’s Dispatch, October 2012 — Page C2

$ave Thou$and$

CSA Approved For Canadian & U.S. Homes

Now available for the first time in Canada, too HUD and modular – Single and park models, too – Approximate 6-week delivery

‘Come & see one of our qualified sales people’ View our photo gallery at pattyseamanhomes.net pshomes@centurytel.net

1-800-735-6786 755-5868

4000 HWY 2 E. • KALISPELL, MT

A field of young sunflowers will slowly rotate from east to west during the course of a sunny day, each leaf seeking out as much sunlight as possible as the sun moves across the sky through an adaptation called heliotropism. It’s a clever bit of natural engineering that inspired imitation from a University of Wisconsin (UW)-Madison electrical and computer engineer, who has found a way to mimic the passive heliotropism seen in sunflowers for use in the next crop of solar power systems. UW-Madison engineering professor Hongrui Jiang looked to sunflowers to help find more efficient ways to harvest solar energy. Unlike other “active” solar systems that track the sun’s position with GPS and reposition panels with motors, electrical and computer engineering professor Hongrui Jiang’s concept leverages the properties of unique materials in concert to create a passive method of re-orienting solar panels in the direction of the most direct sunlight. His design, published August 1 in Advanced Functional Materials and recently highlighted in Nature, employs a combination of liquid crystalline elastomer (LCE), which goes through a phase change and contracts in the presence of heat, with carbon nanotubes, which can absorb a wide range of light wavelengths. “Carbon nanotubes have a very wide range of absorption, visible light all the way to infrared,” says Jiang. “That is something we can take advantage of, since it is possible to use sunlight to drive it directly.” Direct sunlight hits a mirror beneath the solar panel, focused onto one of multiple actuators composed of LCE laced with carbon nanotubes. The carbon nanotubes heat up as they absorb light, and the heat differential between the environment and inside the actuator causes the LCE to shrink. This causes the entire assembly to bow in the direction of the strongest sunlight. As the sun moves across the sky, the actuators will cool and re-expand, and new ones will shrink, re-positioning the panel over the 180 degrees of sky that the sun covers in the course of the day. “The idea is that wherever the sun goes, it will follow,” says Jiang. In Jiang’s tests, the system improved the efficiency of solar panels by 10 percent, an enormous increase considering material improvements in the solar panels themselves only net increases of a few percent on average. And a passive system means there are no motors and circuits to eat into increased energy harvest. “The whole point of solar tracking is to increase the electricity output of the system,” says Jiang. The materials driving Jiang’s design have only been available in the past few years, so for now, he and his team are researching ways to refine them for use driving larger solar panels, where the net energy gain from his system will be the greatest. But eventually, Jiang hopes to see huge industrial solar farms where fields of photovoltaic solar panels shift effortlessly along with the sunflowers that inspired him. “This is exactly what nature does,” says Jiang. For video of a proof-of-concept of Jiang’s design in action, visit http://www.youtube.com/watch?v=5RuBrk5q37 Y&feature=youtu.be

Wild roses

Office phone 434-5211, 234 Front Street, Shelby, MT Office phone 759-5150, 4 First Street West, Chester, MT This entity is an equal opportunity provider. © 2006 Rural Community Insurance Agency, Inc. All rights reserved.

By Ron Smith, Horticulturist, NDSU Extension Service Q: I transplanted a few wild roses last year. Last fall, they seemed to go dormant early. This year, the roses came out with healthy-looking leaves but no blossoms. The leaves disappeared and then new, healthy-looking leaves emerged. Those leaves also are gone now. It looks like someone stripped them from the branches. Any ideas? (Crosby, Minnesota) A: There could be a number of reasons why your wild roses are behaving this way. Beetles can strip plants clean of foliage or a drought/flood cycle could do the same thing. The best thing going for you is that they are wild roses. Wild roses have a deep genetic well of survival resources. All I can tell you is to monitor the roses to see if you can detect anything going on that could be causing this flip-flopping behavior. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C3

Keep poplars?

By Ron Smith, Horticulturist, NDSU Extension Service Q: My question is related to poplars. I had one pop up three years ago in a very wet area around my house. Back then, I didn’t know what it was, but it seemed like a nice tree, so we took care of it. Three years later, it is a very nice tree that is almost 15 feet tall and its leaves look amazing. We cut some lower branches last year and left some clippings on the ground. One of them took root and grew. A year later, I moved it to the backyard. We like their leaves and the fact that they grow so fast to bring us shade. We were planning to plant a few more. However, I am having doubts after reading through your Web page on poplars. Our property is not large, so the tree would be fairly close to our house. Should we keep the two that we have? Should we add the other two we were planning to plant? What other fast-growing trees would you recommend? A: I advise you to keep tabs on these two trees to be sure they don’t start getting ahead of you as far as care goes. As long as you can, keep them properly pruned and monitor or prune the roots that may be going in the wrong direction as far as you are concerned. Beyond a point of reason and common sense, you then need to get the proper care turned over to an International Society of Arboriculture certified arborist for annual maintenance pruning. I planted a couple of quaking aspen in my swampy backyard when I moved to Fargo. Like you, I loved their rapid growth and rustling foliage sounds. However, they started getting ugly in many ways. There was branch dieback, poor form and invasive roots into our vegetable garden. I finally removed them and have been happy ever since. There are plenty of fastgrowing trees to consider, such as northern acclaim honey locust, many cultivars of silver maples, hybrids of silver/red maples, Redmond lindens and cutleaf weeping birch. Your local garden center should be able to advise you on the best trees for your area. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/ndsuag/lawns-gardenstrees.

AGRICULTURAL TRACTORS

NEW New Holland T6050 Plus (105 PTO hp) MFD. Mounted with New Holland TL840 loader and grapple........................... IN STOCK

4-H PARENTS & LEADERS

We are always looking for pictures of 4-H kids and their projects. E-mail them to trader@3rivers.net along with captions and we will print what we have room for.

E- Recycling --- Call us about your old electronics recycling

See Pacific for

I Buying Car Bodies I Scrap Iron I Buying Aluminum Cans I Non Ferrous Metals (aluminum, copper, brass)

USED RAILROAD FLATCARS

A great alternative for low-volume bridges! Contact Steve Smith directly at 406-791-8549

PACIFIC OFFERS

Secure Document Destruction Call for details

Switch Ties in 11’, 12’, 13’, 14’, and 15’

BUYING:

SKID STEER

NEW New Holland L220 skid steer with bucket..................... IN STOCK

HAYING EQUIPMENT

NEW New Holland BR7090 round baler, twine and net wrap................ ....................................... IN STOCK

COMPACT TRACTORS

NEW New Holland Boomer 40HST (41 hp) 4WD with 3-point, PTO and loader NEW New Holland T1510HST (30 hp) 4WD with 3-point, PTO and loader NEW New Holland T1520 standard, (35 hp) 4WD with 3-point, PTO and loader

BUYING LEAD ACID BATTERIES

NEW New Holland Roll-Belt 450 Utility round baler, 540 PTO, twine only. Makes 4’x5’ bales, 40 PTO hp requirement.................... IN STOCK NEW New Holland H7450 13’1” discbine mower conditioner, center pivot with rubber rolls..... IN STOCK NEW New Holland 57 Rolabar rake, PTO drive....................... IN STOCK NEW New Holland 258 hydraulic rake. In Stock.........................CALL

Scrap iron, aluminum cans, copper, brass, aluminum, radiators, paper, card board, computer paper, antlers, etc.

USED EQUIPMENT

1991 New Holland 575 14x18 square baler, 540 PTO. Extremely clean.... .............................................. $7300 2008 New Holland H8040 self-propelled windrower with 12-ft. HS New Holland 320 14x18 square baler, PTO drive. Good condition.... $3900 header, 1360 hours............ $61,900 2009 New Holland T2410 MFD compact tractor, 55 hp, 3-point, PTO ESS transmission, turf tires, loader, bucket, 60 hours................. $29,000 1976 International 1066 2WD tractor, 126 PTO hp, cab, 3-point, 540/1000 PTO, rebuilt engine, 85% rubber..... ........................................... $12,000 Allis Chalmers 185 Crop Hustler 2WD tractor, 74.9 PTO hp, 3-point, 1997 Premier 2920 self-propelled PTO, 3 remotes, Farmhand loader, windrower with 12-ft. MacDon sickle bucket, forks.......................... $7200 header and conditioner, 774 hours.. Allis Chalmers WD45 2WD tractor, 45 ........................................... $32,000 hp, gas, PTO, one new rear remote, New Holland 1495 haybine, diesel, loader, rear blade, new battery........ 12-ft. header....................... $10,900 .............................................. $2200 2006 Vermeer MC1030 13’3” pull-type 2005 New Holland TC35DA MFD disc mower conditioner, 2-point compact tractor, 35 hp, hydrostatic, swivel hitch, steel conditioner.......... 1 remote, loader, grapple, hydrau........................................... $14,000 lic box scraper, canopy, 135 hours. Consigned.......................... $19,500 John Deere 40 tractor with wide front and Shaver HD12 post pounder...... See Western Montana New .............................................. $3250 Holland for all of your New 2008 New Holland LS185 skidsteer, and Used New Holland needs bucket, 3900 hours. Consigned...... ........................................... $23,000

Western Montana New Holland

7719 Thornton Drive 1-406-728-1996 • 1-877-728-1996 After hours - Sales - Jon - 1-406-369-1319 Missoula, MT

Trader’s Dispatch, October 2012 — Page C4

Premium Ewe Lamb topped the sale at $525. Shown here with Scott and Kenzie Jo McKay, Ulm, Montana. Photo courtesy of Bill McKay.

Hard Red Winter Wheat Seed

2012 Choteau Sheep Expo sales report

JAGALENE WETSTONE

We treat with Charter & Dividend We carry a full line of ag crop protection products

BALER TWINE 1 mile north of Ronan East side Hwy 93

Finest Quality Montana Certified Seed Grains & Potatoes

676-2174

The 28th Choteau Sheep Expo gathered for the annual sale September 8, 2012 at the Weatherbeater Barn in Choteau, Montana. With numbers down for the industry 55 head of quality breeding stock were consigned to the sale. Yearling rams averaged $475, Ram lambs at $425, Yearling ewes averaged $300 and Ewe Lambs $275. Averages were down a bit from the 2011 sale. The consigners with the High Selling Rams included: Montana Sheep Company with a Targhee yearling ram for $575, West River Suffolks at $525 for a ram lamb and Langhus Columbias with a yearling SAMM ram for $525. Highlights of the sale included: Bill and Scott McKay, McKay Suffolks, of Ulm, Montana selling the high selling Premium registered Suffolk ewe lamb at auction for $525. Brent and Tracie Roeder, Montana Sheep Company, Fort Shaw, Montana donated a Premium yearling ewe to be sold and the proceeds to go to the Choteau Sheep Expo youth fund for $550. Thank you to Brent and Tracie and the Montana Sheep Company for their donation. Yearling ewes and Ewe lambs included: Prairie Rose Suffolks with a ewe lamb for $475 and Newman Suffolks with a yearling ewe for $400. Sunnyside Hampshires with a ram lamb at $500 and 4 ewe lambs at $325. Top selling Columbia ewe lamb from Gene Langhus went for $325. Prairie Rose Suffolks had 2 ram lambs at $450. West River Suffolks had a ram lamb at $450. Montana Sheep Co. had a yearling Targhee ram at $525 and 4 head at $450.

Bark problems

To discover how one or both of these systems can benefit you, call us today at (406) 492-8229

By Ron Smith, Horticulturist, NDSU Extension Service Q: The bark is pealing on my honey locust. Also, the bark is splitting on a Canada red cherry tree in my yard. The bark on the honey locust started pealing in 2009. I cut several dead branches out of the tree in 2010. There still is one large dead branch in the tree that needs to be removed. In addition to the split bark, the Canada red cherry tree doesn’t have as many leaves as the other Canada red cherry trees in the yard. Can you identify what is wrong with these trees? Thank you for your help. A: The problem with the honey locust is a disease called nectria canker. Unfortunately, there are no chemicals to control this problem. Increasing the vigor of the tree through watering (also to avoid water stress) and planting an appropriate tree on the proper site will help prevent a nectria infection. In addition, avoiding untimely pruning or other wounding will help. As for the cherry tree, the problem is sunscald. It hits most trees in late winter when the temperatures are fluctuating widely from the sun shining on the west or south side of the trees while still dormant. This raises the internal temperature to the point of physiological activity, which is followed by a sudden drop in temperature when the sun goes down or is covered by clouds. Ice crystals suddenly form in active cells, causing rupturing, which manifests itself in split bark. The tree usually handles this stress satisfactorily, but it can be prevented by wrapping the tree in Kraft paper or plastic sleeves in the fall before the freezing weather sets in. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C5

USED COMBINE INVENTORY & HEADERS

Case IH 2588 yield/moisture, chopper, rock trap, long unload auger........................................................................ $194,900 Case IH 2588 764 rotor hours, yield/moisture, chopper, AFX rotor, HID lights, long auger, rear weights......................... $194,500 Case IH 2588 930 rotor hours, AFX rotor, rock trap, chopper, long auger, weights......................................................... $194,500 Case IH 2388 2676 separator hours, chopper, hopper extension, Trimble EZ steer, 500 monitor.................................... $95,000

USED TRACTORS

Case IH 2388 3100 separator hours, chopper, hopper extension, long unload auger, yield/moisture monitor................. $90,000 Case IH 1680, chopper, rock trap, long unload auger................. . ........................................................Make Reasonable Offer Case IH 1660 with 1010 header, chopper, rock trap, Kirby spreader..................................................................... $14,900 Case IH 1015 pickup header, 13-ft. with 7 apron attachment, wind guard............................................................................ $4500

MECHANIC’S SPECIAL

USED 4WD TRACTORS

Case IH 535 Quad Trac 690 hours, leather, loaded, AFS auto steer........................................................................ $345,000

Average Condition Machines

Case IH Puma 180 with L770 loader, bucket, grapple, 1741 hours........................................................................ $118,000 Case IH Puma 165 with L770 loader, bucket, grapple, 1739 hours........................................................................ $107,500 Case IH MXM190 dual PTO, 190 engine hp, LX770 loader with bucket/grapple........................................................... $89,500 Case 2390 with DuAl 3150 loader, bucket and grapple.. $11,500 Case 1086 dual PTO, 18.4x38, 700x16, bucket, grapple..$12,500 Ford Versatile 8770 MFD, dual PTO, 3-pt., 160 hp, 7740 hours, bucket/grapple........................................................... $52,000

USED SPRAYERS

Patriot 3330 self-propelled sprayer, 100-ft. booms, luxury cab, loaded, 892 hours................................................... $235,000

Case IH 500 Quad Trac 2133 hours, diesel, cab, powershift, 4 remotes, HID light.................................................... $225,000

Case IH 2388 long auger, chopper, rock trap, 2469 hours. Retail $90,000.

SALE $49,995

Case IH 9280 12 speed Syncro, 20.8x42 triples, 5261 hours, return line for air seeder............................................. $56,000 Big Bud 350 hp, Cummins 855 engine, 13 speed Road Ranger transmission, Clark 36,000 axles.............................. $24,500 SPX Patriot 3320 90-ft. booms, loaded, 2040 hours.... $195,000

Case IH 2388 4WD, hopper extension, rock trap, long auger. Retail $84,000.

SALE $49,995

USED MISCELLANEOUS

Marflex 1225 80-ft. boom, Kenworth single axle, 42x25-20 flotation front, 48x31-20 flotation rear............................... $55,000 New Holland SF115 suspended boom, 90-ft. booms with screens, 1500 gallon tank........................................................ $44,900 Brandt QF 2500 wheel boom sprayer, 100-ft. booms, Raven control.......................................................................... $8700 Melroe Spra-Coupe 115, 50-ft. booms, 165 gallon.......... $1900

ProAG 12SR bale scoop, big square bale mover, 11x24.5 dual truck tires................................................................... $20,000 Alloway 10”x70-ft. swing auger, hanger bearings, 540 PTO....... ..................................................................................... $6500

BALER CLEARANCE

3 Locations One Inventory

John Deere 567 round baler, 1000 PTO, hydraulic pickup, shedded..................................................................$16,500 No Reasonable Offer Refused

USED ROUND BALER

Vermeer 605XL round baler, net, Bale Command......... $14,900

USED DRILLS

Flexi-Coil 5000, 57-ft., double shoot, Dutch carbon knives, 3” steel packers, 2320 tow between.............................. $50,000 Concord 6012, 60-ft. ,12” spacing, 3 rank, Knock-ons, disk levelers, 3400 cart, double shoot capable........................ $60,000 Concord 4012, 3 rank, single shoot, disc levelers with 2000 cart............................................................................ $15,000 Concord 3212, 3 rank, “C” shanks with farmland boots, single shoot, 2000 tow behind cart...................................... $35,000 Prasco 125-bushel air seeder & fertilizer.......................... $1900 International 150 hoe drills, 38-ft., 10” spacing, 3 drill hitch. Each............................................................................... $300

Stanley Equipment - Stanley, ND - 701-628-2950 Frontier Equipment - Williston, ND - 1-866-774-0957

PO Box 991 Hwy 2 E Glasgow, MT 59230 1 800-345-6042 1 406-228-9341

GLASGOW IMPLEMENT IS YOUR DEALER FOR

1-800-345-6042

406-228-9341

Glasgow Implement - Glasgow, Montana

Brandt 1020 grain cart Brandt 8”x40 grain auger

AFTER HOURS SALES: Pete Pederson 406-228-2912

SERVICE: Mitch McClary 406-263-8325

PARTS: Larry Legare 406-367-5569

K-State Weed Science Team wins regional contest

Trader’s Dispatch, October 2012 — Page C6

1988 Kenworth T800 high hood, 444 Cummins, 13 speed, 46,000 lb. rears on Hendrickson extended leaf, 5-ft. spread, 4.56 ratio, 18,000 lb. front axle, new Hardox 15’6” box, hi-lift tailgate.$39,500

Steerable lift axles

1998 Western Star 475 Cat, 18 speed, 46,000# double lockers, 12,000# front with floats, nonsteer lift axle, 18-ft gravel box with tarp, 58” sides. (This truck would work for beets)....$36,500

Hendrickson Paralift with axle.$3600

2005 International Cummins ISX 425 hp, 10 speed, 64” sleeper, 3.55 rears. Cummins recon with only 245,540 miles.$31,500

2000 Peterbilt 379 long hood, 475 hp N-14, 13 speed, American Class interior, 3.70 ratio....... ......................................$30,500

2000 Peterbilt 379 475 hp Cat 3406E, 13 speed, 3.70 ratio, virgin rubber...................$27,500

1990 Peterbilt 379 short hood, 3406B with low miles on engine, 13 speed, flat top, great virgin tires, great brakes..........$19,500

1991 International daycab, 3176 Cat, 10 speed, 3.21 rears, low pro 24.5 good tires..................$9500

1986 International Cat 3406B, 13 speed, 255 wheel base, aluminum steer. Price reduced to............$15,000

2003 GMC Duramax SLE extended cab, short box leather AliArc, bedliner, toneau cover, headache rack, 176,000 miles.... ......................................$14,000

1993 Volvo 13 speed, 212” wheel base, great brakes, virgin drives................................$9500

Visit Us On The Web trkshop.com

Just In! 1995 Freightliner dump truck, low miles on Cummins N14, performance 9 speed, 14-ft. box, great tires and brakes......... ......................................$29,500 1992 Peterbilt 379 dump truck, 3406B Cat, 13 speed, 17-ft. box. ......................................$21,500

1994 Freightliner Detroit Series 60 360/400 hp, 9 speed, 40” sleeper, all aluminum wheels. Sharp looking truck, less than 500,000 miles................$16,500

1996 Freightliner FLD 120 water truck, 460 hp, N-14, rear locker. Nice tires!.......................$25,500

2000 Freightliner Classic Cummins N14 460 hp, RTLO18918B 18 speed, 3.70, REAR LOCKER, aluminum wheels, 11R24.5 nice virgin tires......................$26,500

2006 Chevrolet /4 ton, long box, 6.0L gas, automatic..........$5995 3

1990 Ford L9000 dump truck with 3406B Cat, 14,000# front axle, double locker rears and 16-ft. box........................$18,500 1986 International dump truck, 16-ft. box, Cummins NTC-350, 13 speed, lift axle and pintle hitch.... ......................................$18,500

1998 Freightliner Classic water truck, Detroit 500 hp rebuilt in 2005, 13 speed, 265” wheel base, near new cap drive tires..... ......................................$29,000

Freightliner FL70 service truck, welder, air compressor, crane on 11-ft. service bed...........$32,500

2000 Kenworth T800 day cab, ISM 370 hp, 3.90 ratio, 10 speed, 170” wheel base, great virgin drive tires, just had annual inspection, ready for work............ ......................................$22,500

2005 Kenworth T800 Cat 435 hp, 13 speed, 3.90 ratio, 224” wheelbase, nice virgin drive tires, 377,129 miles.......$45,500

BELLY DUMPS AND OTHER TRAILERS JUST IN!

1968 Beall belly dump, double bottom, good tires and brakes, center point spring suspension... .........................................$7900 1997 Ranco 35-ft. tri-axle belly dump..............................$21,500

Transmissions and Differentials

RTLO16913....$2750 ($1500 core) RTO14613........................... $1500 Most 9, 10, 13 and 15 speeds.CALL Rockwell, Eaton, Spicer, IH differentials - most ratios available

2 CAT C15 Engines

BXS01601 475-hp. 242,000 miles..... ............................................$12,500 MXS59658 550-hp..................$7500 T H E

2-2008 Kaufman tri-axle 46.5-ft. step deck trailers, great 17.5 tires, great decking. Your choice....................$16,500

ENGINES AND TRANSMISSIONS WITH EXCHANGE

2006 Wes-Tex Road Builder 42-ft. tandem axle belly dump. Very straight, never abused......... ......................................$22,500 1974 Fruehauf 42-ft. lowboy, like new tires and brakes......$11,500 2008 Load King belly dump trailer, center point spring suspension..........................$35,000

2006 Kaufman tandem axle, 48-ft. step deck, good 17.5 tires, great decking.................$11,500 1985 Trail King tri-axle belly dump, all new king pin plate and bushings, good super single tires, good brakes. Ready for work...............................$17,500

Engines

Cummins N14’s, BCII 400, BCIII 350 & 400, BCIV 400, M11’s Cummins ISX 475 hp CPL#2629 Cat C15’s, 3406E’s, 3406B’s Cat 3054 Serial #5Ys.............$3200 Detroit 6V53T........................$5500 Detroit 60’s Volvo VED7C 275 hp..............$4000 We have a large selection of used parts

Weld-It Company aluminum tank pup trailer, 11R24.5 tires, 4300 gallon.......................$7000 1997 Cornhusker 45x102 hopper trailer, ag hoppers, 8-ft. sides, 11R/24.5 tires on aluminum wheels, new brakes.......$22,500

TRUCK SHOP BILLINGS O F

Call 406-254-2400

3145 N. Frontage Road – Billings, MT

INC.

Reman Crankshafts

Cat 3406E......................... $1250 Cat 3406B........................ $1050 Cummins N14.................. $1500 Cummins 855 BC/SC........ $900 Cat C12............................ $1200 Also available ISX, L10, M11, 3306, DT466, C15, Det 60 series

K-State’s 2012 Weed Science Team won the overall undergraduate teams category at the recent North Central Weed Science Society Collegiate Weed Contest in Larned, Kansas. Back row, left to right – Dallas Peterson (coach), Kindsey Myers (Brownsville, Indiana), Andrew Esser (Lenexa, Kansas), Zane Raudenbush (Port Allegany, Pennsylvania), David Brachtenbach (Fort Collins, Colorado), Amar Godar (Manhattan, Kansas), Anita Dille (coach) Front row, left to right – Jake Wyrill (Kirwin, Kansas), Jessie Zimmerman (Alta Vista, Kansas), Josh Putman (Lyons, New York), and Kim Kerschen (Garden Plain, Kansas).

The 2012 Kansas State University (KSU) Weed Science Team had a successful showing at the recent North Central Weed Science Society Collegiate Weed Contest held Thursday, August 9 in Larned, Kansas. It was hosted by Diamond Ag Research. The undergraduate team finished in first place overall in the undergraduate teams category, and had the top score in team sprayer calibration. The team consisted of: Kim Kerschen, Garden Plain, Kansas; Jake Wyrill, Kirwin, Kansas; Jessie Zimmerman, Alta Vista, Kansas; and David Brachtenbach, Ft. Collins, Colorado. Individual award winners included Jake Wyrill, first place overall undergraduate score, top score in Farmer Diagnostic Problem Solving Event, top score in Written Sprayer Calibration Event; and Kim Kerschen, second place overall undergraduate score, and top score in Weed Identification Event. A graduate team, consisting of Andrew Esser, Lenexa, Kansas; Amar Godar, Manhattan, Kansas; Zane Raudenbush, Port Allegany, Pennsylvania; and Josh Putman, Lyons, New York, also competed. In addition, Kindsey Myers of Brownsville, Indiana represented KSU as an individual in the graduate student division. Amar Godar won second place overall in the graduate division and had the top score in the Weed Identification Event. Team coaches were Dallas Peterson and Anita Dille, professors of agronomy. The events in the contest were Weed Identification, Herbicide Identification, Written and Team Sprayer Calibration, and Farmer Diagnostic Problem Solving. Other teams in the contest were the University of Missouri-Columbia, University of Nebraska-Lincoln, University of Wisconsin-Madison, Western Illinois University, Oklahoma State University, and Purdue University.

Interveinal chlorosis

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a neighbor who has a plant with interveinal chlorosis on the newer leaves. The older leaves at the base of the plant are completely green. I thought I could find a solution in a soils book, but I couldn’t. What is the best thing to do to snap the plant out of its problem? A: This most likely is chlorosis that is caused by the lack of iron due to a high soil pH. It can be corrected in a couple of ways. Apply Hi-Yield Iron as a granular that will be taken up by the plant. The product has a very high percentage of iron and sulfur that temporarily will acidify the soil and make the iron available. Only new growth following the application would show improvement in new foliage color. There are liquid applications of iron products that are chelated and taken in by both the foliage and roots. These products go by the name of Ferti-Lome and Bonide. Both current and new growth typically respond to applications of either product when label directions are followed. All of these products should be available at local garden centers. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C7

12-ton Spreader

5000EX Grain Vac

Peterbilt 335 Spreader Truck

Just Traded! • 10” auger • 40-ft. hose package

Nice Buy or Lease To Own

• Stainless steel

• Tarp

Buy or Lease To Own

$2411/yr - oac

• Dual spinners

$9979/yr - oac

RR250 Rock picker

• 10 ton spreader • GPS • Stainless steel box • Dual spinners

Buy it, Lease it or Rent it.

NEW Land Roller F-3 Series

Heavy Harrow SAVE BIG Rental Return! • 50-ft. width • Spring kit • Hydraulic tine adjustment • 16.5x16.1 tires

Buy or Lease To Own

$7430/yr - oac

Last Unit

Get the job done! Buy or Lease To Own

Fertilizer Spreaders

3106 Rock Picker

Buy or Lease To Own

$9940/yr - oac

JUST IN – John Deere 787 air drill GOOD DRILL

• Rock windrower

Buy or Lease To Own

IN STOCK

$3247/yr-oac

• Forward folding system • 46-ft. working width • 42” diameter drum • Narrow transport

• Rock picker

$4641/yr - oac

Grain Trailer

• Liberty model • Mild steel • Tarp • Tandem axle • Dual spinners Buy or Lease To Own

$6872/yr - oac

Grain Trailer

• 230 bushel cart

• 41-ft. width

Buy or Lease To Own

• 12” spacing

$6614/yr - oac

NEW 2012 Vertical Tillage Unit

IN STOCK

• Aluminum grain trailer • 42-ft. • Roll tarp • Air ride suspension • Aluminum rims Buy or Lease To Own

$7304/yr - oac

#10 Post Pounder

• Steel grain trailer • 24.5” low pro recaps Buy or Lease To Own

• 40-ft. • Roll tarp

$5571/yr - oac

Sprayer

Red or Green

• 70,000# impact • Post rack • Honda engine

Buy or Lease To Own

$2411/yr - oac

3400 Old Havre Highway – Great Falls, MT

• 2400 gallon

• 132-ft. booms

• Duals

SAVE OVER $7000 on October program with deposit. Nothing due until April 2013

1-888-453-2924

• Vertical disc’s

• Harrows

• Baskets

Rent As Low As $9.00/acre Call Us Today

Just In – Safe & Fast (12) Brandt 5200’s

(6) Brandt 7500’s

• 10” auger • 13” auger * 7” system * 8” system • One man operation • One man operation Buy or Lease To Own Buy or Lease To Own

$4456/yr - oac $5264/yr - oac Check us out on the web at www.frielingsonline.com Danel Frieling

Keith Lippert, cell 799-1494

Trader’s Dispatch, October 2012 — Page C8

Advertising Deadline for the November issue of the Trader's Dispatch will be November 2. Friday BEFORE first Monday of each month.

Potential for increased US malting barley acreage

By Karen Hertsgaard, Information Specialist, Institute of Barley and Malt Sciences Several factors could lead to a trend in not only greater barley acreage in the US, but also an increase in the geographic John Deere 4055 MFWD, Power Shift, distribution of malting barley production. Rising world beer 3 point, new rubber and 7300 hours. production, a growing domestic craft beer industry, and local Extra nice............................$34,000 sourcing of ingredients all contribute to potential changes in Case IH MX180 MFD, PowerShift and great rubber........................$50,000 the production of malting barley. Barley has historically been an important rotational crop in John Deere 7330 Premium MFWD, the northern plains, intermountain regions, and upper Midwest 3-pt., PowrQuad, LH reverser, JD in the United States. Changes in federal farm programs, a rise 741SL loader, 1900 hours.....$99,500 John Deere 8420 MFWD, Power Shift, 3-pt., weights and duals, 5200 in world demand for oilseed crops, alternative crop options and hours...................................$99,500 other factors have led to a decline in barley acreage over the John Deere 8220 MFWD, 3-pt., Powerpast 25 years. In regions where significant amounts of both Shift....................................$82,000 Above tractor with used JD843 feed and malting barley were grown, the area seeded to malting loader..................................$96,000 4- New Holland 8770 MFD, Power Shift barley varieties fell at a much slower rate than the area planted 1995 John Deere 7700 MFWD, 3-pt., 2 and 3-point. 6700, 6300, 5500, 5300 to feed varieties. Comparing the most recent 5-year period PTO’s, power steering. Very nice..... hours...................$38,000 - $40,000 (2008-2012), to the 1988-1992 average seeded area in the states . ..........................................$37,500 Above tractor with new Allied 2895 2008 John Deere 7230 Premium John Deere 4455 MFWD, Power Shift, loader with bucket & grapple. Add.... of Idaho and Montana, all planted barley fell by 44.5% while MFWD, PowrQuad, 741 loader, . ..........................................$14,000 3 point, 6800 hours. Nice....$36,500 two-row malting varieties only declined by 16.8%. The slower bucket, grapple...................$91,000 John Deere 4255 MFWD, Power Shift, decline of malting varieties results from the steady demand for Check our web site: 3 point, 8400 hours.............$34,500 high quality malting barley by the domestic malting and brewCOMING IN: mttractors.com Allied Loaders Available 2-JD 4050 & 1-JD 4055 ing industries. It has come about in part, through increases in All With MFWD & Powershift ~ ~ As Low As 3.55% Financing oac ~ ~ the direct contracting of barley production by industry. The 33.5% increase in global beer production in the last ten Call (406) 777-3000 or 370-6362 or 240-1575, Stevensville, MT years results in an expanded export market potential for US Email: penderfarms@aol.com malt and malting barley. While much of the increase is in Asia, there is a significant increase in beer production in Mexico and other countries in the Americas that are better positioned for importing US barley products. Free trade agreements recently implemented with some countries in these regions further enhance opportunities for US Billings, Montana www.mtrpwr.com barley. Billings, Montana Changes in domestic brew8 Blow Out 0 “Find our most up-to-date prices Prat To Choose ice $38,00 ing markets have also inFrom! www.mtrpwr.com.” creased the demand for US barley malt. The growth of all malt beers has been in the double digits in recent years and this trend is not slow(8) 06 Volvos VNL64T, Cummins ISX ST 450 hp, Jake, 10 spd direct, air ride, 215"WB, stand up sleeper, signature Interior, dual ing. Brewers Association tanks,PW, Pwr mirrors, dual air ride seats, traction control, tilt & cruise, alum wheels, 80% Brakes!! 85% tires!! Stk# TP $43,000 Technical Brewing Projects Coordinator Chris Swersey says that “The average all-malt ‘07 Peterbilt 378 Cummins ISX 475 hp, 15 speed, 4.11 ratio, 225” wheelbase, dual axles, dual tanks, power brand is brewed with around windows, heated mirrors, Webasto heater. Stk# G674257............................................... Call For More Info! 65 pounds of malt per barrel, Call us, we’ll e-mail you 30 pictures roughly 3.5 times more malted barley per barrel than typical ‘09 International ProStar Cummins ISX ST 455 hp, 10 speed, 73” Stand-Up sleeper, 230” wheelbase, tandem axles, dual aluminum tanks, power windows, power mirrors, power locks, chrome bumper. adjunct beers. Continued roStk# MT-4711-9-1................................................................................................................................$59,000 ICE SAVE SAVE SALE PR Sale Price $9 00 ,00 5,0 bust all-malt volume growth 0 $2 00 $1 $37,0 Call us, we’ll e-mail you 30 pictures 6,000 SAVE SALE PRICE $1 0,0 00 00 will require that the makeup $43,0 and volume of the US barley supply will have to change significantly in the next 10-15 years.” Large and small brewers alike have seen an increase ‘04 Peterbilt 379, Cat C15 475 HP, Jake, 10 spd O.D., air ride, ‘04 Intl 9400i Cat C15 435 HP, Jake, 10 spd O.D., air ride, 213” ‘04 Peterbilt 379, Cat C15 475 HP, Jake, 13 spd O.D., air ride, 3.70 ratio, 250” WB, 63” Unibilt tall sleeper, Am Class int, dual WB, 4.11 ratio, dual tanks, 51” hi rise pro sleeper, Prem int alum 3.70 ratio, 250” WB, 63” Unibilt tall sleeper, Am Class int, dual in the sales of their all-malt tanks, exhaust & air cleaners, alum wheels 80% Tires!! wheels, PW & PDL, air slide 5th wheel tanks, exhaust & air cleaners, alum wheels 80% Tires!! 50% Brakes! Stk# TPN639T-1 $53,000 STK# TP3954T-9 $34,000 50% Brakes! Stk# TPN640T-1 $53,000 brands. Another change that CALL US! WE’LL E-MAIL YOU 30 PICTURES CALL US! WE’LL E-MAIL YOU 30 PICTURES CALL US! WE’LL E-MAIL YOU 30 PICTURES Save could impact the geographic 5 To $11,000 $48,000 Choose From distribution of malting barley arises from the “buy local” trend in sourcing food. Many ‘06 Freightliner M2 dump truck, Cat C7 190 hp, Fuller 6 speed manual transmission, 4.11 ratio, 10-ft. bed, brewers have expressed an dual 50 gallon tanks, cruise, block heater, heated mirrors, air dryer, air ride split bench seat. Stk# MT-4787T-91................................................................................................................................$31,000 interest in sourcing some of Call us, we’ll e-mail you 30 pictures 05 Kenworth T800 Cat C15 475 hp, Jake, 10 spd Autoshift, air ride, 00 Kenworth W900L, Cat C15 475 hp, jake, 13 spd OD, air ride, 04 Pete 379, Cat 475 HP, Jake, 18 spd OD, air ride, 3.36 ratio, their raw materials locally and 3.42 ratio, 240" WB, 62" Aerocab tall slpr, dual tanks, VIT interior, alum 3.55 ratio, 260" WB, 72" tall slpr, dual tanks, exhaust & air clean- 250" WB, 63" tall slpr, dual tanks, exhaust & air cleaners, alum wheels, dual 72” bunks, Pwr windows, tank heaters, wheels, tilt wheel, air slide 5th wheel, locking rear axles, ers, dual bunks, PW, T&C, 70% virgin tires!! ‘05 Kenworth W900B Cat C15 475 hp, Fuller 13 speed, Aerocab sleeper, 3.36 ratio, 244” wheelbase, a few have begun to contract $39,000 STK# N681T-1 95% tires!! 95% brakes!! Stk # TP4083T-1 $59,000 $21,000 Stk# 4173T-7 tandem axles, dual tanks, right side power mirror and power window, heated mirrors. Stk# G082507............ CALL US! WE’LL E-MAIL YOU 30 PICTURES CALL US! WE’LL E-MAIL YOU 30 PICTURES CALL US! WE’LL E-MAIL YOU 30 PICTURES their malting barley regionally. ............................................................................................................................................$ Call For Price $ 4 To HEAVY Choose SALE PRICE Locally sourcing has led to SP ECS From $59,000 Call us, we’ll e-mail you 30 pictures small malting operations being built to process the barley, and to legislation in New York and Maryland promoting beer produced with barley grown 06 Frtlnr FLD120SD, Cat C15 475 hp, Jake, 10 spd Autoshift, air 07 Intl 9900ix, Cummins ISX 565 HP, Jake, 18 spd OD, Hend Air ‘05 Frtlnr Columbia, Cat C13 430 hp, jake, 10 spd OD, air ride, ride, 3.42 ratio, 244" WB, steerable pusher axle, dual tanks, Ride, @ 46,000#, 3.58 ratio, 244" WB, alum whls, dual tanks 3.58 ratio, 176" WB, air slide 5th wheel, alum wheels, dual tanks, in state. exhaust & air cleaners, PW & PDL, dual bunks, fridge, 46,000# RA PW, Pwr mirror r/s, tilt & cruise, exhaust & air cleaners, htd mirrors, tank heaters, , 85% Tires!! 50% Brakes!! Stk# TPN670-1 $65,000 $55,000 90% Brakes!! 95% Tires!! Stk#4085T-1 Stk# TP4135T-9 $29,500 There are a number of reaCALL US! WE’LL E-MAIL YOU 30 PICTURESBillings, CALL US! WE’LL E-MAIL YOU 30 PICTURES CALL US! WE’LL Montana E-MAIL YOU 30 PICTURES www.mtrpwr.com SA VE sons to expect that US barley SALE PRICE $6,500 Great Falls, Montana USED $23,000 ‘02 Freightliner FLD 120064ST Cummins ISX 450 hp, Meritor 10 speed direct, 70” Mid-roof sleeper, 2.64 8 could t acreage has hit a low and Ou ow Bl ratio, 230” wheelbase, tandem axles, dual aluminum tanks, power windows, power heated mirrors, full To Choose chrome gauges, fridge. Stk# MT-4933T-1............................................................................................$17,900 “Find our most up-to-date prices atPrice $38,000 rise as global, domestic From! and Call us, we’ll e-mail you 30 pictures www.mtrpwr.com.” regional demand for malting barley climbs.

MT Tractors

MOTOR POWER EQUIPMENT CO.

MOTOR POWER

800-332-7780

1-800-332-7780

SALE PRICE

MOTOR POWER KENWORTH

MOTOR PO

800-823-4848

1-8

Trader’s Dispatch, October 2012 — Page C9

Serving The NW For Over 40 Years

• Livestock • Grain Hoppers • Flatbeds • Muv-All Lowbeds

1705 Old Hardin Rd. • Billings, Montana

equipment trailers

800-513-6922

406-259-2053 • SALES • PARTS • SERVICE E-mail: krrauch@krrauch.com/kevinrauch@krrauch.com Ken cell 698-1540

Kevin cell 670-5210

FLATBED TRAILERS

2013 Wilson CF 48’x102” combo, aluminum floor, 10’2” air ride spread, 4 steel/4 aluminum wheels. ..................................................................................................................................................P.O.R.

2013 Crossman all aluminum gooseneck, 25’ main with 5’ beavertail/ramps, 25,000 GVW, (2) 10,000# axles, 5920#.............................................................................................................................. P.O.R.

GRAIN TRAILERS 2013 Manac 53’x102” combo dropdeck, triple axle full air ride, steel wheels 22.5’s, winches........... .................................................................................................................................................P.O.R. 2008 Wilson R-Tac sets, 29’ lead, 25’ pup, 102” wide, 72” side height, full air ride, aluminum wheels.......................................................P.O.R.

2006 Fontaine 48’x102” steel flatbed, aluminum floor with nailers, sliding winches, 4 steel wheels/4 aluminum wheels................ P.O.R.

2013 Wilson DWH 50’x96”, 72” sides, ag hoppers, full air ride with rear lift, aluminum wheels. .................................................................P.O.R.

1999 Wilson set of R-Tac’s, 29’ lead trailer, air ride pulling 25’ pup trailer, spring ride, aluminum wheels, telescopic tongue.........................................................................................................P.O.R.

2000 Utility 28’x96” flatbed semi, wood floor, winches, spring ride, steel 22.5 wheels, radial 22.5’s, pintle hitch.....................................P.O.R.

1985 Western 40’x96” flatbed/hopper, spring ride, aluminum wheels, pintle hook...........P.O.R.

LIVESTOCK TRAILERS 2013 Wilson DWH 50’x102”, 78” sides, Shurco tarp, ag hoppers, full air ride with rear lift, 3 hoppers...........................................................P.O.R.

2005 Timpte 42’x96” grain trailer, 78” side height, side chutes, spring ride, steel wheels 24.5’s....... .................................................................P.O.R.

2013 Wilson PSGN 7’x24’, 2 interior gates perm, sealed access door D.S. nose, full length running boards, Wolf Point, MT..............................P.O.R.

2004 Doepker 18’x96” steel grain pup, 60” sides, HGC traps, spring ride, steel wheels, telescopic tongue.......................................................P.O.R.

1996 Homemade 16’x96” grain pup, 66” sides, roll tarp, spring ride, steel wheels, 24.5 tires, telescopic tongue......................................P.O.R.

2013 WIlson DWH 40’x96”, 66” side height, roll tarp, high ground clearance, full air ride, steel wheels, 24.5 radial tires, pintle hitch, 30” off ground.......................................................P.O.R.

2005 Timpte 50’x96” grain, 72” side height, full air ride with rear lift, new 11R24.5 tires and wheels.......................................................P.O.R.

2013 Wilson PSSC 7x24, 4’ tack, center gate, vents, tie rails, tie loops.............................P.O.R.

2013 Wilson PSSC 7’x22’, stock combo, 4’ tack, vents, tie rail, tie loops, running boards, spare tire/ wheel........................................................P.O.R.

2013 Wilson PSGN 7’x22’, center gate with inner swing, rear full swing with outside slider...P.O.R.

2006 Featherlite 24’ steel, wood floor, 2-interior gates with sliders, rear full swing with slider....... .................................................................P.O.R.

2013 Wilson PSAL 53’x102”, straight floor livestock, 3 compartment, air ride, sliding suspension, steel wheels 24.5.............................P.O.R.

Trader’s Dispatch, October 2012 — Page C10

John Deere 9400 4WD, 425-hp, powershift, 4 SCV’s. 4970 hours...................................... $105,000 (H)

Hesston 9365 windrower, 15-ft. rotary header......... ..........................................................$73,900 (B)

Flexi-coil 5000/2320 57-ft. air drill, 10” spacing, single shoot................................................. $51,500 (H) New Holland 8870 with super steer, MFD front axle, 180 hp, powershift. 3959 hours........ $56,500 (LV)

Cat Challenger 65 30” tracks, 4 SCV’s, 270 hp....... ......................................................... $32,000 (H) 3-2012 John Deere 568 round balers, loaded. Approximately 2000 bales. ............ $37,950 ea (LV)

John Deere 4990 with 14.5-ft. rotary header, Impeller conditioner.............................................. $58,000

John Deere 326D 2600 lb lift, 2 speed, hand controls....................................................$29,900 (B)

John Deere 7930 180-hp, AutoQuad, duals............ ........................................................ $129,500 (L)

Flexi-coil 67XL sprayer, 100-ft. booms, 1000 gallon tank, 20” spacing.............................. $13,500 (H)

John Deere 4720 MFWD, loader, 58-hp, cab, air, heat.................................................. $37,950 (LV)

New Holland TV140 bidirectional, loader, 14-ft. hay header............................................. $57,500 (LV)

Deutz-Allis 7120 2-wheel drive, cab...... $16,500 (B) John Deere 777 40-ft. air drill with 10” spacing, single shoot, blockage monitor.................... $19,000 (G)

2006 Case IH MXU130 MFD, powershift, loader...... ......................................................... $65,000 (G)

2011 John Deere 9770STS with 223 hours. No header............................................. $275,000 (L)

John Deere 7520 with MFWD, cab, loader and grapple.............................................. $95,500 (H) 2009 John Deere 7730 tractor with PowrQuad, 2050 hours, 152 PTO hp..........................$114,000 (B)

2010 John Deere 7430 with JD 741 SL loader, 140 PTO hp, 1400 hours.........................$129,950 (B)

John Deere 1890 42-ft. air drill, 10” spacing, single shoot, 1910 tank................................$95,500 (B)

John Deere 1820 61-ft. air seeder, 12” spacing, double shoot, Dutch points............... $68,000 (H)

John Deere 7820 tractor with AutoQuad, 155 PTO hp, 5215 hours.................................. $96,500 (H)

John Deere 9450 drills, 50-ft. ,12” spacing, hitch and transport............................................ $23,000 (H)

2009 John Deere 9670STS with 860 separator hours, duals, chopper................................. $210,000 (L)

(406) 538-5433

Trader’s Dispatch, October 2012 — Page C11

1.9 % Fixed Rate for 5 years or 12 months interest free waiver. Qualified OAC.

Round Balers

New John Deere 568 mega wide, wrap.... .............................................$42,500 (L) 2012 John Deere 568 wrap, loaded, 2272 bales...................................$37,950 (LV) 2012 John Deere 568 wrap, loaded, 2117 bales.....................................$37,950 (L) 2012 John Deere 568 wrap, loaded, 1726 bales...................................$37,950 (LV) John Deere 568 round baler, twine only.... ............................................$26,500 (G) John Deere 567 mega tooth, net wrap...... .............................................$25,000 (L) John Deere 567 net wrap, mega wide, 1000 PTO..................................... $22,500 (H) 2002 John Deere 567 with MegaWide pickup...................................$21,000 (L) 2002 John Deere 567 with MegaWide and mesh wrap............................$18,500 (L) John Deere 567 twine only, MegaWide..... ............................................$17,500 (G) John Deere 566 540 PTO, twine only........ ............................................ $17,750 (H) John Deere 566 mega tooth, surface wrap....................................$14,500 (LV) John Deere 566 round baler, mega tooth, no net.................................$11,950 (LV) John Deere 535 round baler, push bar, twine and net.......................... $7200 (G) John Deere 535 round baler, push bar, twine only............................... $6950 (H) John Deere 535 540 PTO, twine only........ ............................................... $6500 (H) John Deere 535 5-ft.x6-ft. bales, double twine arm, push bar...............$4950 (LV) 2011 Case RB564 twine/net, 3020 bales... ....................................... Coming In (G) Case IH RB564 round baler with net wrap. ............................................ $19,900 (B) Case IH RBX562 baler............... $8500 (H) Case 8465 round baler................$2900 (L) Hesston 5465A baler.............. $21,500 (H) 2-Hesston 560 round baler, twine only...... ...........................................$4000 ea (L) New Holland 688 baler, surface wrap....... ............................................ $10,500 (H) New Holland 660 baler, twine only............ ...............................................$5950 (G) New Holland 648 baler, makes 4-ft. x 5-ft. bales with wrap......................$9500 (LV) New Holland BR780 round baler, wide pickup, net wrap..................... $7500 (H) Vermeer 605M net wrap, wide pickup........ ............................................ $17,500 (H) 2001 Vermeer 605XL round baler............. .............................................$14,500 (L) Vermeer 605K 5-ft.x6-ft. bales....$5000 (L)

Construction Equipment

John Deere 326D skidsteer, 2600 lb lift, 2 speed, hand controls.......... $29,900 (B) John Deere 323D track skidsteer, 875 hours....................................$45,000 (L) John Deere 280 skidsteer, cab, no heat, 2700 hours.......................... $19,900 (B) Bobcat 742 38 hp, 1250 lb capacity........... . .............................................$8500 (G) Bobcat S185 skidsteer loader, 56 hp, 1850 ROC, 750 hours.................$19,500 (LV) New Holland telehandler.... Coming in (L) Allis Chalmers 816 backhoe loader.......... . ............................................$7950 (LV)

Sprayers

2009 John Deere 4930 sprayer................. .............................................. $265,000 (H) John Deere 4710 sprayer...Coming in (H) Flexi-Coil 67XL 100-ft., 1000 gallon.......... ............................................ $13,500 (H) 2-1996 Flexi-Coil 65 100-ft....$7500 ea. (H)

Miscellaneous

Riteway heavy harrow, 70-ft..Coming In (H) Degelman 45-ft. landroller...... $35,000 (H) Brandt 13x70 auger................... $7500 (H) Buhler FK Y1010H 10” transfer auger....... ............................................... $2700 (H) Westfield 6”x36’ grain auger.......$1500 (L) Westfield 7”x36’ grain auger.......$1500 (L) Brandt 5000 grain vac........Coming In (H) Walinga 6614 grain vac.......... $15,500 (H) MDS 7-ft. rock bucket with grapple............ ............................................... $5500 (H) Bobcat 2200 utility vehicle......... $5950 (H) Arctic Cat 500 ATV with front blade.......... ............................................... $4950 (H) 2011 Polaris Ranger 800 XP side by side..........................................$9500 (L) Polaris Ranger 700 XP utility vehicle with cab.......................................$12,000 (G) 2008 Polaris Ranger 700 XP utility vehicle........................................ $9500 (H) 2003 Polaris Ranger 6x6 utility vehicle, professional series................. $4900 (B) Case IH Scout XL utility side by side......... ............................................$10,500 (G) Kubota RTV1100 utility vehicle, cab, heat, air conditioning, 130 hours..$17,500 (G) Land Pride utility side by side.................... ........................................Coming In (H) Suzuki 250 cc 2WD quad.......... $2850 (H) Frontier LR2060 5-ft. landscape rake....... .................................................. $550 (B) Bale Squeeze for John Deere 740 loader.. ................................................. $350 (H) Danuser 3 point post auger, 5 bits............. ................................................. $750 (H) Danuser EB10 post hole auger..$1400 (L) Shaver 901 post hole digger, 3-pt. mount, PTO drive, 2 bits..................... $1475 (B) Ford 908 5-ft. rotary cutter........... $250 (H) Farm King 60” finish mower.........$750 (L) Buhler 9620 8-ft. snowblower, excellent.... ................................................$4200 (L) Loftness SB84H 7-ft. snowblower............. ................................................$7295 (L) Bush Hog......................................$950 (L) High Power generator, 12,000V, PTO....... ..................................................$900 (L)

Drills

John Deere 1890 air drill ....... $97,000 (B) John Deere 1860/1900 42-ft. air drill, 7.5” spacing............................... $69,900 (B) John Deere 1820/1900 60-ft. air drill, 12” spacing, double shoot......... $68,000 (H) John Deere 9450 50-ft. drill, 12” spacing, packers............................... $23,000 (H) John Deere 9350 40-ft. drill, 6” spacing, transport......................... Coming in (L) John Deere 777 air hoe drill, 40-ft., 10” spacing, single shoot.......... $19,000 (G) 1997 Flexi-Coil 5000 57-ft. air drill, 9” spacing, 230 bushel, single shoot......... . .......................................... $51,500 (H) Flexi-coil 5000/2320 57-ft. air drill, 12” spacing................................$45,000 (L)

Miscellaneous Haying

John Deere 390 8-ft. flail mower...$5500 (H) 35-ft. small square bale elevator with electric motor, excellent condition....... $1450 (B) New Holland 1033 bale wagon, auto tie.... ..............................................$5500 (LV) New Holland 1032 bale wagon, auto tie.... ..............................................$5950 (LV) Ford 501 7-ft. sickle mower, 3-point........... ..............................................$1350 (LV) H&S 12 wheel bi-fold rake.......... $2500 (H) Sitrex RP4 wheel rake............... $1250 (G)

Windrowers & Mower Conditioners

2011 John Deere R450 windrower, V10, 994 14.5-ft. rotary head, 300 hours........ .........................................$107,500 (LV) John Deere D450 windrower with draper.. ...........................................$129,500 (L) John Deere 4990 14.5-ft. rotary mower, impeller.................................$58,000 (L) John Deere 4895 windrower, 16 ft. sickle, steel conditioner.................. $56,000 (H) John Deere 2280 swather, 16-ft hay head....................................... $4500 (H) John Deere 2320 windrower, gas.............. ............................................... $7500 (H) John Deere 2360, 1822 hours, 30-ft. draper..................................$20,000 (G) John Deere 956 14.5-ft. rotary mower conditioner.................................$30,000 (G) John Deere 956 14.5 ft. rotary swing tongue..................................$27,500 (L) John Deere 956 14.5-ft. rotary swing tongue.................................$20,000 (G) John Deere 945 13-ft. rotary mower conditioner..................................$13,950 (LV) John Deere 936 mower conditioner, impeller conditioner...................... $15,500 (B) Agco-Hesston 9365 windrower with 15-ft. rotary head.......................... $73,900 (B) 2011 Case 2303 16-ft rotary, 190 hours..... ....................................... Coming In (G) Case IH 8870 with 16-ft. sickle...$35,000 (L) Case IH 8830 14 ft. sickle. 1400 hours...... ............................................ $17,500 (H) New Holland 1475 14-ft. swing tongue, hydraulic tilt......................... $11,000 (H) New Holland 1431 13-ft. rotary swing tongue................................$13,950 (LV) New Holland 116H with 16-ft. sickle, rubber roll conditioner.........................$7500 (L) Hesston 6600 no cab, 12-ft hay head....... ................................................$5500 (L) Versatile 4025............................ $8800 (H) MacDon A30 16-ft. double sickle............... ............................................ $27,500 (H)

Combines & Attachments

2-John Deere 9770STS combine.............. . ...................................$262,000 ea.(G) 2-John Deere 9770 combine with 223 hours............................... Coming In (L) 2008 John Deere 9770 combine, 213 hours................................. $278,000 (H) John Deere 9760 STS combine, hydro, 1434 hours..................... Coming In (G) John Deere 9760 combine with 1398 separator hours........................ $175,000 (H) John Deere 9760 combine with 1177 separator hours........................ $175,000 (H) John Deere 9670 combine....$210,000 (L) 2-1997 John Deere 9600 combine............ . ..................................... $58,000 ea (H) John Deere 7720 hydro with 224 platform......................................$11,000 (L) John Deere 7720 combines. .... $9500 (H) John Deere 8820 combine with 30-ft. platform.........................................$9500 (L) 1995 Case 2188 combine, 2132 separator hours...............................Coming In (H) Gleaner N6 combine with 24-ft. head........ . ............................................. $3500 (H) 2-John Deere 635D header....................... . ..................................... $57,500 ea (H) John Deere 635D header....... $75,000 (H) 4-John Deere 936D header....................... . ..................................... $46,000 ea (H) 2004 Case IH 2042 grain platform............. . ..........................................$33,000 (G) 4-MacDon SP42 42-ft. draper heads......... . .................................... $69,500 ea. (H)

More Used Heads IN STOCK

Tractors

John Deere 9400 4WD, 425 hp................. .......................................... $105,000 (H) John Deere 9200 4WD, 310 hp, 4300 hours....................................$93,000 (L) John Deere 7930 180 hp, IVT, MFWD, duals...................................$137,500 (L) John Deere 7930 180 hp, AutoQuad, MFWD................................$129,500 (L) John Deere 7820 155 hp, MFWD.............. ............................................ $96,500 (H) John Deere 7730 152 hp, MFWD.............. ...........................................$114,000 (B) John Deere 7600 110 hp, MFWD, cab, loader................................... $51,000 (G) John Deere 7520 125 hp, MFWD with loader.................................. $95,500 (H) John Deere 7430 145 hp, MFWD, loader.. .........................................$129,950 (LV) John Deere 7400 100 hp, cab, MFWD...... .............................................$33,000 (L) John Deere 7210 95 hp, MFWD................ ............................................ $53,500 (H) John Deere 6430 Premium 99 hp, low hours, loader........................ $74,500 (B) John Deere 6420 95 hp, IVT, triple link, loader............................. Coming In (LV) John Deere 5603 82 hp, MFWD, loader.... ............................................ $44,500 (H) John Deere 5410 65 hp, MFWD, SL loader.................................... Coming In (G) John Deere 5320 65 hp, MFWD, loader, open cab...............................$29,500 (L) John Deere 4720 58 hp, MFWD, cab, loader..................................$37,950 (LV) John Deere 4600 45 hp, MFWD, loader. 900 hours............................ $18,000 (G) John Deere 4520 125 hp, loader............... ................................................$8900 (L) 1974 John Deere 4430 2WD, partial PowerShift, loader......................$14,500 (H) John Deere 4410 29 hp, MFWD, loader.... ............................................ $16,900 (B) John Deere 4010 85 hp, no 3-point, with DuAl loader..............................$6900 (L) John Deere 3038E 38 hp, MFWD............. ........................................ Coming In (L) John Deere 2020 2WD, 54 hp, 3-point...... ............................................... $7900 (H) Case IH 2870 300 hp, 4WD..Coming In (H) Case IH 856 95 hp, 2WD, cab....$5000 (L) Case IH MX275 with L780 loader.............. .......................................... $156,000 (H) Case IH MXU130 MFWD, loader............... ............................................$65,000 (G) Case IH MX120 MFWD, loader.................. ............................................ $58,500 (H) 2010 Case Puma 165 loader, 850 hours... ....................................... Coming In (G) Case IH JX95 cab, loader, grapple............ ....................................... Coming In (G) Massey-Ferguson 8120 130 hp, loader, 4600 hours.........................$52,500 (LV) New Holland 8870 180 hp, super steer, 3959 hours.........................$56,500 (LV) New Holland 8160 90 hp, 2WD, no loader ............................................ $21,500 (H) New Holland TC40..................$16,000 (L) New Holland TV140 bidirectional, loader, 14-ft. head..........................$57,500 (LV) Versatile 895 4WD.............. Coming In (L) Versatile 875 4WD, 280 hp..... $22,000 (H) Allis Chalmers 7050, duals, loader, blade. ............................................ $17,500 (H) Caterpillar 65 270 hp, 30” tracks, 4 hydraulics....................................... $32,000 (H) Deutz Allis 7120..................... $16,500 (B) Ford 8000 105 hp, cab, loader... $8000 (H) Steiger PTA325...................... $27,500 (H) Valtra A95 95 hp, MFWD, cab, loader....... .............................................$40,000 (L)

Tillage

Flexi-Coil 60SB 62-ft. spreader bar........... ................................................$6000 (L) Homebuilt 18-ft. single fold chisel plow..... ..............................................$1200 (LV) Melroe 38-ft. chisel plow, cable lift............. ............................................... $3500 (H)

Trader’s Dispatch, October 2012 - Page C12

Equipment Connection, LLC

Small Town Company with Big Connections Accept: Mastercard, Visa, Discover, American Express

1-800-681-2096 or 406-756-9196

4775 Hwy 2 West, PO Box 958 Columbia Falls, MT 59912 email: sales@equipment4u.net For all pieces, log on to our website: www.equipment4u.net

$6500

$5995 $38,500

JLG Skytrak 8042 telescoping forklift cab, heat, 14.00x24 rubber, 1100 hours.

$47,500

2012 Bobcat S650 skidsteer loader cab, heat, air, radio, includes trencher, hydraulic auger, forks, 2 buckets.

Toyota F620 forklift 6000 lb. lift, 6 cyl propane engine, dual front tires.

$11,000

Mitsubishi BD2F dozer LGP pads, dozer blade with hydraulic tilt.

Sandbagger M2 sand bag machine Kohler 7 hp gas engine, new engine and hydraulic pump.

$11,000

$9500 $8950

$13,500 Scat Trak 2300D skidsteer loader 2000 hours, OROPS, auxillary hydraulics.

$15,000

2002 Bandit 254 chipper self-loading, John Deere diesel engine.

2007 Lincoln Vantage 500 welder Deutz diesel engine, trailer mounted, CC, CV, 3000 hours, excellent shape.

John Deere 455 D crawler loader 4-in-1 bucket, power shift, forks, all new pins and bushings in loader, 4500 hours Wacker vibratory walk behind trench roller Hatz diesel engine, remote control, 900 hours.

$25,900 $1000

$9450

1995 John Deere 6675 skidsteer loader auxilary hydarulics, 66” bucket.

Berkley PTO water pump 3” inlet, primer, 540 PTO.

$4000 & $4500

John Deere 750 C dozer 6 way dozer, winch, OROPS.

$15,500

Pro Tech Sno Pushers - In stock 10-ft. and 16-ft. bucket mount.

$4150

$2995 Rammax vibratory walk behind trench roller gas engine, 33” drums.

$2995 $3000

$26,500 Caterpillar 277 B track skidsteer loader pilot controls, good tracks, 2200 hours.

1986 Chevrolet step van 6.2L diesel engine, automatic tranmission, 16-ft. Meyer 3-yard sander Honda engine, good shape.

$37,000

$1500

John Deere 450 B dozer angle blade, winch, OROPS with sweeps, nice little dozer.

$26,900 2009 Worksaver HDP-16 skidsteer post pounder new condition!

$3995 Galion gravel box 15-ft., includes hoist.

2001 Cat 420D backhoe/loader cab, heat, A/C, 4x4, extend-a-hoe, pilot controls, 4300 hours.

Edge skidsteer blade attachment hydraulic angle, 6-ft. wide, bolt-on cutting edge, like new.

Caterpillar D6 C dozer angle dozer with twin tilt, OROPS canopy, engine enclosures, rock guards, ripper, very low hour undercarriage, powershift, very nice D6C.

$39,900

$2350

$29,900 $4650

2007 John Deere 210 LE skid loader OROPS, turbo, 4x4, 4-in-1 front bucket, rippers, new rubber, wheel weights

40-ft. refrigerated cargo container Thermal King reefer unit, 3-phase, 24/480 volt

$19,000 2001 International 4700 reefer truck 466 diesel engine, 5 speed transmission, 18-ft. reefer box with side door, hydraulic lift, 156,000 miles.

2004 Cat 420D backhoe/loader cab, heat, A/C, 4x4, extend-a-hoe, pilot controls, 4100 hours.

$3500 $10,000 Huber grader tractor 8-ft. moldboard, front dozer blade, gas engine.

John Deere GT80 skidsteer grapple 80” wide, new.

$2000 B700C backhoe plate compactor good shape!

$30,000

1977 Fruehauf 40-ft. van trailer nice shape!

$5000

John Deere 310E backhoe loader cab, heat, A/C, 4x4, extend-a-hoe. • 2 AVAILABLE! •

Case 480LL 2 wheel drive grade tractor OROPS canopy, loader, grade box.

$5500 $19,900

$2600 Bobcat 15C hydraulic skidsteer auger NEW.

$3995

$1750

Powerscreen screening plant Mark 1, 3x6 2-deck, hydraulic drive, Lister diesel engine, plate feeder, dump grizzly with 8 yard hopper.

$4000

NEW Telehandler bucket fits on forks on any telehandler.

$19,500

1999 Case 570 LXT grading tractor 4x4, 84” front bucket, Gannon box scraper, OROPS canopy.

$3000 $11,500

New Hendrickson air up/air down tag axle kit fabricated axle, controls included.

Speedshore trench box 4-ft.x20-ft.x6-ft., excellent shape!

Hydraulic grapple fits Cat loaders.

Kolman 3x7 3-deck screen plant plate feeder, 4 cylinder Continental gas engine.

1990 Monan 48-ft. van trailer barn doors, 22.5 rubber.

$19,900

2005 Everest 5th wheel camp trailer 36-ft., 4 slide-outs, 16” rubber, nice shape

Trader’s Dispatch, October 2012 - Page C13

$78,000

$26,500

$42,000 $8000

$6999

1991 Ford F450 service truck 7.3L diesel engine, new automatic transmission, 12-ft. bed, recently detailed!

1988 International bucket truck 466 engine, auto transmission, service body, 50-ft. High-Ranger lift, clean truck. John Deere 225C LC excavator cab, heat, air, hydraulic thumb, hydraulic quick coupler, 6600 hours.

$37,500

1998 John Deere 120 excavator cab, heat, hydraulic thumb, long stick, extra counter weight.

$50,000

1994 Kenworth W900B water truck 3176 Cat engine, 10 speed transmission, 3600 gallon water tank, pump sprays, all new rubber.

$44,500

1998 Hitachi EX300 LC excavator cab, heat, hydraulic thumb, nice machine.

John Deere 160 LC excavator cab, heat, long stick, thumb, quick attach, auxiliary plumbing, 4000 hours.

$6500

$4250

1999 Samsung SE210 LC-3 excavator cab, heat, air, hydraulic thumb, 1350 hours.

$15,900

2001 Dodge 1-ton flatbed pickup bale handler bed, 4x4, Cummins diesel engine, 5 speed transmission.

$13,900

2006 Komatsu PC 160 excavator cab, heat, air, hydraulic thumb, 2700 one owner hours, very nice machine.

1982 International S1900 dump truck single axle, 10-ft. dump box, gas engine, 5 speed + 2 speed transmission, 20” rubber.

1993 Zieman 2324 tilt bed equipment trailer 27-ft. tilt deck, 3-ft. stationary deck, 16.5 rubber, spring suspension, air brakes.

$21,900 1993 Komatsu PC200 excavator cab, heat, air, hydraulic thumb

$39,900

$28,500

2001 Grove A80J manlift 80-ft. lift, Cummins diesel engine, foam filled tires.

1996 Peterbilt 378 dump truck N14 Cummins engine, 13 speed transmission, 16.5-ft. Ox dump body, 24.5 rubber.

$20,900

$20,000

2000 Freightliner FLD 132 Classic truck N14 Cummins engine, 500 hp, engine brake, 13 speed transmission, new 22.5 drive tires, aluminum wheels, dual stack, headache rack.

John Deere 544G wheel loader cab, heat, air, 3-yard bucket, nice loader.

$25,500 $11,000 1980 GMC General dump truck

8V92 Detroit engine, 13 speed transmission, 15-ft. box, pusher axle.

$21,900

1986 Hyster 50-ton lowboy trailer 3-axle, hydraulic folding neck, self-contained, 24.5 rubber, 20-ft. well

$14,000 1996 Kenworth T800 truck M11 Cummins engine, 370 hp, engine brake, 10C transmission, Aerocab sleeper, 8 bag suspension, pintle hitch, aluminum wheels.

$6500

$5995

2006 Interstate 10-ton equipment trailer pintle hitch, 3 ramps, 16” radial rubber, very nice trailer.

$9950 2001 JLG 3369 scissor lift electric power, 17.5 hard rubber tires.

$33,500

$7995

$41,900

2003 Peterbilt 379 extended hood truck C15 6NZ Cat engine, 18 speed transmission, 63” Unibilt sleeper, dual stacks and cleaners, 24.5 rubber on aluminum wheels

Insley H-3500 B excavator 892 Detroit engine, D8 undercarriage, 2.75 yard bucket, weighs 120,000 lb.

1970 Load King belly dump trailer double gate.

1965 LaCrosse lowboy trailer beavertail, ramps, 8 new tires, nice older lowboy.

2000 Freightliner FLD 132XL Classic truck N14 Cummins engine, 500 hp, jakes, 13 speed transmission, dual stacks and cleaners, headache rack, side box.

$93,500

COMING IN

$8500

$19,900

Bobcat 325 mini excavators - 2 Available OROPS canopy, blade, quick attach, pattern changer, 2500 hours, one with thumb, one without.

1973 Ford L900 grain truck gas engine, 5 speed/2 speed, 16-ft. box.

$6995

1994 Chevrolet 3500 dump pickup 12-ft. dump box with hoist, 6.5L engine, automatic transmission, 16” rubber.

$17,500 & $18,500

$61,500

1998 International 4700 flatbed truck 466 engine, 6 speed transmission, 20-ft. flatbed with rear lift gate, 22.5 rubber, 155,000 miles.

$9995

1998 Peterbilt 379 short hood truck 475 hp Cat engine, 10 speed transmission, 63” Unibilt sleeper, dual stacks, 24.5 rubber.

Grove MZ90 manlift Wisconsin gas engine, 90-ft. reach, all new rubber, new paint.

$23,500 1994 Kenworth T800 truck day cab, 400 Cummins engine, jakes, 13 speed transmission, 24.5 rubber on aluminum wheels, headache rack, 2-line wet kit, 8-bag suspension.

Caterpillar 980 B wheel loader cab, heat, good rubber, nice clean older loader.

$35,000

$26,500

$28,500

2013 Trail Max TRD 50 tiltbed equipment trailer 3 axle, pintle hitch, 17.5 radial rubber, 50,000 lb capacity.

1986 Kenworth T600 dump truck 3406C Cat engine, jakes, 15 speed transmission, 16-ft. Galion gravel box, Chalmers suspension, 24.5 rubber, pintle hitch, dual stacks.

1987 Komatsu WA 350-1 loader cab, heat, 3.5 yard bucket with teeth, 80% rubber, third valve, nice loader!

$6750

$29,500 $7250 JLG 1532 E 3 scissor lift electric power, hard rubber tires.

1996 Road Boss 32-ft. gooseneck trailer 3 axle, folding tail with ramps, new deck.

1999 GMC 7500 lube truck 3126 Caterpillar engine, Allison 5 speed automatic transmission, 22.5 rubber, all aluminum lube body with top roll cover, 250 gallon waste oil tank, evac. system, hydraulic filter crusher, 3 oil product tanks, hydraulic air compressor, very clean truck.

$89,900

$7500 2006 Kaufman gooseneck flatbed trailer 2 axle with duals, 20,000 lb. GVW, 24-ft. deck, ramps, electric jack.

$49,900

Linkbelt L130 wheel loader cab, heat, 3-yard bucket, quick attach, third valve.

1995 Ford crane truck L-10 Cummins engine, 335 hp, 13 speed transmission, 18,000# fronts, 40,000# rears, 3-way lockers, 2002 Terex 5092 crane, 25-ton capacity, 92-ft. boom, 45-ft. 2-stage jib, 4500 hours, one owner/one operator since new, recent clutch and transmission.

$2250

NEW 4x9 man basket fits forklifts.

Equipment Connection, LLC 4775 Hwy 2 West, PO Box 958 Columbia Falls, MT 59912 email: sales@equipment4u.net For all pieces, log on to our website: www.equipment4u.net

$4500

1984 Chevrolet 3/4-ton pickup 6.2 L diesel engine, automatic transmission, 4x4, grill guard, 69K miles, 16” rubber at 90%.

Small Town Company with Big Connections Accept: Mastercard, Visa, Discover, American Express

1-800-681-2096 or 406-756-9196

Trader’s Dispatch, October 2012 — Page C14

Injured oak tree

The deadline for phoning in advertising for the November issue of the Trader's Dispatch will be November 2. Phone (406) 279-3291. Eureka Brand Premium Wood Pellets IN STOCK

By the ton or by the bag Keep the weather out. INSULATE NOW!

Kraft Faced Insulation Unfaced Insulation Blow-In Insulation Rigid Insulation In 3/4”-3” Free use of machine with purchase of Blow-In insulation.

STEEL FENCE POSTS 51/2 ft. • 1.33#

121/2 gauge

DAVIS BRAND WIRE

Barb & Barbless 80 rod

IN STOCK NOW

4”x16’ full round and 16’ split corral rails

9!! $11.4

RAILROAD TIES

Custom Pole Buildings

Good supply in stock

Prebuilt Trusses 8’ to 20’ Sidewalls

1x6 - 6-ft. Cedar Fence Boards

FREE ESTIMATES

Square Edge: $2.49 Dog Eared: $2.70

• Grain Storage • Calving Barn • Machinery Storage • Insulate for a Shop • Etc.

Full Treated Fence Posts BLUNT 6-7”x8’ 7-8”x8’ Treated 16-ft. rails

29 gauge classic rib, 36” coverage Galvanized or colored

POINTED 3-4”x6’ 4-5”x6’ 5-6”x7’ 4-5”x7’ 6-7”x8’ 7-8”x8’

Call for quantity pricing

Open Saturdays 8:30 AM to 1:00 PM

& Power Tools On Hand Tools & Fasteners

Windbreak Boards Since 1946

1x6 - 6-ft. - $144 1x6 - 8-ft.-- $192 1x8 - 6-ft.-- $230 1x8 - 8-ft.-- $307

406-279-3251 • In MT - TOLL FREE 1-800-622-7734 FAX 406-279-3712

1x10 - 6-ft.-$293 1x10 - 8-ft.-$390 1x12 - 6-ft.-$381 1x12 - 8-ft. $508

Quantity Pricing Available

Box 568, Valier, MT 59486

By Ron Smith, Horticulturist, NDSU Extension Service Q: We have a question about a young bur oak tree we planted near our cabin on Spiritwood Lake. We planted it six years ago. Since then, it has grown nicely. A few weeks ago, we arrived at the lake to find that a big ash tree had blown over in a windstorm and fallen right on the young oak tree. The oak wasn’t broken off, but it is bent over about halfway up. We cleared the ash away and then straightened and splinted the top half of the oak in hopes that it will recover. However, the top half is now brown and dying. Do we cut off the trunk where it was bent over and hope that new growth will take over and form a continuation of the main trunk or would it work to gently bend one of the side branches and encourage it to grow straight up? Thanks for any ideas you may have. A: The injury from the ash probably tore apart the connecting vascular tissues to the top of the tree. Based on the information you’ve provided, I doubt that this part of the tree ever will recover, so it should be pruned off. If I understand your information, there are lateral branches that are OK. One of those branches will assume apical dominance and begin growing upright. This could result in an interesting looking tree, but a tree worth having nonetheless. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu. edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/ horticulture.

$2995

$8500

$7500

$5000 1986 Bayliner boat 19-ft. open bow, outboard 125 hp Force engine, nice shape.

1990 NorPro 30 KW self-contained GenSet 3.9L Cummins engine, single or 3-phase, 120/240 volt

$5500

2005 Chevrolet 2500 cab chassis 3 /4-ton, 4x4, 6.0 liter gas engine, 140,000 miles.

$12,500

Warner & Swasey 35 KVA genset continental engine, propane-powered, 120-208 volt, 3-phase, 104 amp.

$2150

Ditch Witch 1030 walk-behind trencher Honda gas engine, hydro drive, new chain and teeth.

$1500 Bearcat PTO chipper 3 point mount, 540 PTO, 6” feed.

1997 Vermeer trencher 31x15.5 rubber at 80%, 6 way front blade, backhoe with 10” bucket, trencher has side shift, 5-ft. digging depth, 1300 hours.

Equipment Connection, LLC 4775 Hwy 2 West, PO Box 958 Columbia Falls, MT 59912 email: sales@equipment4u.net For all pieces, log on to our website: www.equipment4u.net

D L SO Massey-Ferguson 1155 tractor 2-wheel drive, Perkins engine, PTO, 3-point, duals, cab, heat

$2995

Fruehauf log rigging complete with newer scales, 22.5 rubber.

Small Town Company with Big Connections Accept: Mastercard, Visa, Discover, American Express

1-800-681-2096 or 406-756-9196

NDSU recognized by Tree Campus USA program

By NDSU Extension Service The Arbor Day Foundation has given North Dakota State University (NDSU) recognition through its Tree Campus USA program. The Arbor Day Foundation has several recognition programs to inspire people to plant, nurture and celebrate trees. Two such programs are Tree City USA and Tree Campus USA. The Tree Campus USA program recognizes excellence in campus tree management, as well as student and community involvement across the nation. NDSU put together a Campus Tree Advisory Committee and developed a plan to meet all of the required standards before submitting an application to the Arbor Day Foundation. “This is a very exciting time for NDSU,” says Todd West, NDSU Plant Sciences Department associate professor. “Obtaining Tree Campus USA status is a very positive step for NDSU with respect to promoting and celebrating trees on our campus, community and state. Trees are an important commodity in North Dakota, especially with the harsh growth conditions in the northern Great Plains. NDSU has a strong commitment to woody plants and has a research program dedicated to woody plant improvement.” Each year, NDSU will hold an Arbor Day observance as required by the five standards for the Tree Campus USA program. “An Arbor Day observance provides a golden opportunity to educate the campus community to the benefits of trees on campus and the region,” West says. “Research is a vital component of NDSU, and this project is an excellent opportunity for the extension of the NDSU woody plant research project to be made available on the NDSU campus,” West says. “The garden will be open to those on campus and the entire state.” The woody plant improvement program was developed by Dale Herman, NDSU emeritus faculty, and Larry Chaput, NDSU retired research associate. In the past year, West has taken over for Herman to continue the research program. The NDSU woody plant improvement program has released more than 50 unique ornamental trees and shrubs suited for the northern Great Plains environment. Many of the trees and shrubs can be found planted on the NDSU campus. NDSU woody plant introductions are being propagated for sale by commercial wholesale firms in the U.S., Australia, Canada and England. More information about the releases can be found at http://www.ag.ndsu.edu/plantsciences/research/releases/woody-plants. NDSU is the first and only campus in the state to be given the Tree Campus USA recognition.

Trader’s Dispatch, October 2012 — Page C15

New Load of Bradford truck beds Just Arrived..... more on the way! Call for sizes and pricing

KROGMAN BALE BEDS IN STOCK Travalong Rancher 20-ft. trailer (16’ cargo with 4’ straight wall tack), brush fenders, LED lighting. Charcoal in color. Work or play in style

John Deere 50 Very nice We are your Herd, Thunderstruck & Truck Defender frontend crash protection headquarters for pickups and semis

Walton bumper hitch tiltbed, 16’+4’. All the options and ready to work! Walton 26-ft. gooseneck with flip over ramps, 14 ply tires, 7000# axles and all options. Bosses demo

Barrett Jeff’s Cell: (406) 949-6070 Jess Eichorn: (406) 491-3640

Livestock—Horse Flatbed Trailers

Jeff Welborn, cell 406-949-6070

Vaughn Truck Salvage

Chuck or Jim Vaughn

ENGINES

1-406-265-6387 Local or 1-800-214-4654

2100 Hwy 2 East, Havre, MT

1985 GMC General Cummins Big Cam III, 300 hp, 9 speed, spring suspension...... ............................................... As Is $4500 All used engines are sold with new rod & main bearings

Cummins Big Cam 3, 400-hp, recent O/H 2-Cat 3406E 435-hp Cat 3406C 425-hp 2-Cat 3406E 475-hp

Differentials

Over 150 differentials 34,000 to 46,000 lb.

Allow one day notice to disassemble, inspect and reassemble with new parts as needed. 90 day warranty.

2-Cat C15 Acert (09 EPA) 475-hp Cat C10 Detroit DDEC 3 430/470-hp Detroit DDEC 4 14L, 435-hp, 10 months on OH

TRANSMISSIONS

Great selection of Rockwell, Fuller, & Spicer used take out transmissions. Call with your model for a quote.

ENGINE PARTS ~ Rebuilt Engine Parts

Cylinder Heads For: 3406B, 3406E and C15 Cat, 855 and N14 Cummins, Series 60 Detroit

2001 Kenworth T300 Cat 3126, 9 speed, steerable lift axle, 24-ft. van box with liftgate, needs front end repair. Without box and lift axle.................$5500 1992 Peterbilt 379, short hood, 3406C Cat, Super 10 speed.

Trailer Suspensions

2004 Freightliner Columbia 14L Detroit, 435 hp, 10 speed, 10 months on overhaul. 1995 International 9400 Cummins M11, Super 10 speed, good cab and hood. 2001 Volvo daycab, Series 60 Detroit, 9 speed, 2 aluminum wheels, needs engine.

See our website at: www.vaughntrucksale.com

96” wide axle with 10 hole unimount....... ........................................................... $550 96” wide axle with Dayton hubs....... $250 (3) 102” Tandem Axle, air ride suspension. Each.................................................. $2500 102” Tandem Spread Axle, air ride suspension................................................... $2950 (2) 102” Tandem Axle spring suspension, 22.5 Dayton hubs. Each..................... $500

6-Tri-Pac APU, each...........$2500

Controlling gait of horses may be possible

Trader’s Dispatch, October 2012 — Page C16

•Certified CCA, TSP, CNMP Agronomist • Soil Testing • Fertilizer • Custom Application • Precision Ag • Field Scouting

Ledger office 406-278-3388

Brad 450-4508

Joe 788-0653

Tim 460-1153

Nina 289-0459

Analysis of a specific mutation in a gene in horses that affects the ability of horses to use alternate gaits is strongly related to racing performance and is advantageous for harness-racing horses. In domestic horses, the mutation has had a major impact on their diversification, as the altered gait characteristics of a number of breeds apparently require this mutation, according to a study that includes a Texas A&M University researcher. Gus Cothran, a professor in the Animal Genetic Lab of the College of Veterinary Medicine & Biomedical Sciences, is part of a team of researchers that examined motion in horses and also mice. Their findings are published in the current issue of Nature magazine. Cothran and the team used a process called “whole genome SNP analysis” to study the genes of 70 Icelandic horses that had either four gaits or five, with the pace being the fifth gait. This pointed to a gene identified as DMRT3 that is critical for horse motion and limb movement. They found that DMRT3 has a major impact on the movement of a horse, especially its gait. Horses have gaits classified in three descriptions of speed: walk, trot and gallop. Gait is a critical factor in racing “‘Gaitedness’ is a trait that naturally occurs in all horses, but many breeds have been developed for a specific speed or gait,” Cothran explains. The team sequenced the DMRT3 gene of the test horses and found that in almost every case of gaited horses, there was mutation in the DMRT3 that caused a premature “stop codon” which causes the protein product of the gene to be terminated before the whole protein is completed. This alters the function of the protein which leads to the differences associated with the gait. Cothran and the team also examined the same gene and its effect on mice. “We specifically looked at the gene and its effect on the movement of mice, such as its swimming ability,” he adds. “The motion ability of mice seemed suppressed and was similar, though not identical to that of gaited horses.” Cothran says with more research, the findings could have critical importance to horse breeding and horse racing. Many horses are specifically bred for certain types of gait, such as harness racing. “We need to examine the DMRT3 on certain breeds and see if it can directly affect the speed and movement of horses,” he adds. “Naturally, it’s something that horse breeders and anyone involved with horse racing would be interested in and would want to know about. These findings could have a major impact on future horse breeding. “We think it’s an exciting step in looking at motion, speed and limb movement, and it’s possible it could have implications in other species, too.” The project was funded by grants from the Swedish Brain Foundation and computer resources were supplied by the Royal Swedish Academy of Sciences Research.

Pear trees

Round-up your financial needs this fall and bring them to your Hometown Bank for the friendly service you deserve. Local ownership – Local Decisions

Celebrating 100-years of “Hometown” Service

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a question about pear trees. Last year, we moved into a home with a large pear tree that was full of fruit. It continued to bear fruit faster than we could pick them. We loved it. We were amazed after the incredible drought we had in eastern Texas last summer. This year, we had an exceptionally mild winter. The tree flowered beautifully and produced a small amount of pears in the early spring. Now it’s August and there is nothing at all. I read that there must be two pear trees close to each other. We only have one tree. It was struck by lightning many years ago and pulled together with wire. The wires are grown into the tree. I do feel like it needs to be cut back some. The branches are large and full, but I wanted to be sure to contact someone who truly knew how to do it. What are your thoughts as to why it isn’t producing? We were so looking forward to our pears this year! A: Overproduction one year leads to no production the following year. It will come back to a bearing cycle next year. Contact your local Texas A&M Extension Service agent to get some advice on pear tree pruning. Go to http://counties. agrilife.org/ and click on your county to get local assistance. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

Trader’s Dispatch, October 2012 — Page C17

Sick maple tree

By Ron Smith, Horticulturist, NDSU Extension Service Q: I heard you on the radio answering a question about a silver maple that you thought had severe chlorosis and was a goner. We have a maple that we have been treating for chlorosis since last fall. The leaves are yellow and have crinkly brown leaves at the end of the branches. We have been working with the nursery that planted the tree. The recommendation was to apply iron. We put liquid iron into the ground last fall and twice since then. About five weeks ago, we also added aluminum sulfate. We did that because the people at the nursery told us that our soil is so alkaline that we need to try to acidify it. The tree hasn’t seemed to respond at all. Do you have any other suggestions? We would rather not lose the tree. A: The problem with pH-generated iron chlorosis is in the method and timeliness of the response. A temporary fix can be achieved by using a liquid formulation sprayed over the foliage of the tree. At this stage in the season, it probably is too late to have any impact. I would encourage you to continue with the applications of chelated iron and acidifying fertilizers. If the tree ends up dying and you want to replace it, do so with a hybrid or cultivar that is noted for being resistant to pH-induced iron chlorosis. Seedling selections are a shot in the dark because they may or may not be resistant. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

DUMP TRUCK FOR SALE

1999 Ford Sterling L9513 dump truck. Phone 406-799-6923

www.reddigequipment.com GRADERS

Champion 720A good working condition................... $21,000 Galion A556 grader, snow wing, all wheel drive, front blade, good machine for the money................................ $30,000

Case 580 SL 2714 original hours, enclosed cab, 4 in 1 loader bucket, extend-a-hoe, 24” dig bucket, excellent hoe.......... . ............................................................................ $30,900

Call Us Today For Your Undercarriage Needs! FORKLIFTS & LIFTS

Ingersoll-Rand RT70G 6000 lb. forklift, John Deere diesel power, shuttle shift transmission, 21-ft. mast........ $12,900 JCB 505-19 forklift, enclosed cab, runs excellent, good machine, 8000 hours................................................. $19,900 Lull 644 telescopic forklift. Manitou T604TC 4WD all-terrain forklift........................ $7500 Cat 130G ripper, scarifier, Balderson hydraulic front blade, 14-ft. moldboard. This has a $30,000 work order on the engine.. . ................................................................................. POR

We HAVE TIRES

for graders, loaders and backhoes!

TRUCKS & TRAILERS

1987 International 9370 Eagle Cummins Big Cam 4, 400 hp, 13 speed, PTO, Hendrickson RTE, rebuilt rear suspension, all new brake components and clutch differential....$13,500 Olympic trailers. Western Star 4800 13 speed transmission, 400 Cummins, excellent tires, excellent 15-yard box....................... $9500

CRAWLERS

Cat 936F loader, 4-in-1 bucket, air, excellent tires.

Fiat-Allis 14C crawler, very good undercarriage, twin tilt blade, power shift, 2600 hours, excellent........................ $29,500 John Deere 650G crawler, ROPS, parallel ripper, hydraulic slope board ripper, low hours on complete undercarriage.

FORESTRY

Clark Ranger 66C skidder, dual function grapple, brush rake and tight blade............................................................ Call John Deere 540B skidder winch, runs good, chains....$13,900 Several fellerbunchers, Danzco delimber, sawheads.

EXCAVATORS

Gradall 534D6-42 forklift, 4800 hours, 42 feet of reach, fork tilt, good lift............................................................ $19,900

International Cummins, Jake brakes, clean cab, and very good, single sleeper, flatbed with air controlled ramps, 8-ft. wide, 18-ft. long with 5-ft. beavertail, 8-ft. ramp is air cylinder controlled, aluminum wheels, 11R24.5 good rubber.......... . ............................................................................ $15,500

2007 Cat 304CCR recent new rubber tracks, 2300 hours, blade, enclosed cab, air conditioning, heat, hydraulic thumb, quality................................................................... $39,500 Cat 325L hydraulic dual link thumb, 44” bucket, recent engine work, new rails, sprockets, bottom rollers..............$43,900 Hitachi EX60-2 rubber tracks, 24” bucket. Good quality machine...................................................................... $17,500 Hitachi UH172 runs good, 7783 hours...................... $17,500 Hitachi EX200-5 recent complete undercarriage replacement, runs very strong, 6500 hours................................. $53,000 John Deere 35D like new rubber tracks, 3 buckets, very nice. . ............................................................................ $27,000 John Deere 120LC long arm, hydraulic hoe pack, quick coupler, 24”, 36”, & 60” buckets, cat walks, cab guard, excellent................................................................ $46,000 John Deere 135C new rails and sprockets, hydraulic quick change, dual link hydraulic thumb, air conditioning, 3800 hours. 1999 John Deere 200LC excavator, 5688 hours....... $54,000 Kobelco SK200LCIII bucket, dual link hydraulic thumb, guaranteed 4900 original hours, immaculate machine..$32,500 Komatsu PC150-5, 24” pads..................................... $26,000 1985 Komatsu 220LC-3 bucket, thumb, runs excellent for an older machine.

LOADERS

Case 721 6051 original hours, 20.5x25 rubber, teeth system and bolt on smooth lip reversible cutting edge...... $32,500 Clark Michigan 45 CGM with 453 Detroit - fresh engine, third valve hydraulic system, log forks, enclosed cab, heater, excellent tires. Runs very, very well...................... $19,900 John Deere 644AA 3 yard bucket, fair tires, runs well, ROPS.................................................................... $13,000 Komatsu WA 320-1 evenly matched set of tires, third valve, clamp bucket, operates well, excellent loader....... $35,500

BACKHOE

John Deere 160LC quick change, bucket, thumb, good undercarriage, tight........................................................ $39,500

We HAVE Many attachments for excavators including rollers, buckets, cabs, forks, blade, brush rake, thumbs & bucket teeth in stock.

Ford 555E 1600 original hours, 3 buckets, 4x4, enclosed cab........................................................................ $28,500 John Deere 310D 4x4, extend-a-hoe, enclosed cab, air conditioning, 3 buckets, 4 in 1 front bucket, very good.$21,500 John Deere 310D 4x4, enclosed cab, extend-a-hoe, repinned and bushed backhoe, 1.3 cubic yard loader bucket with reversible cuttting edge, 310D turbo, 1-ft. bucket, 2-ft. bucket, quick change, spare rear tire, fair tires in back, excellent tires in front.

Reddig Equipment and Repair 888-592-5880 (Office) – 2866 Highway 2 East • Kalispell, MT

Trader’s Dispatch, October 2012 — Page C18

TRACTORS – 175 hp or greater

TRACTORS 40 hp to 99 hp

2011 Case IH Farmall 75A 125 hours. #707843....................................$31,500

2010 Case IH Steiger 485 850 hours. #707727..................................$255,000 2010 Case IH Magnum 335 1566 hours. #703760..................................$220,000

2009 Case IH Puma 195 2063 hours. #703767..................................$106,500

1997 John Deere 7810 4996 hours. #500607....................................$60,000

2009 Kubota M95X 524 hours. #707769... . ................................................$55,800

Steiger Panther IV KM325 1365 hours. #706740....................................$28,900 2006 Case IH MX285 3086 hours. #706513..................................$135,000

Case IH MXM190 966 hours. #707795....... . ................................................$97,500 2010 Case IH Puma 180 2300 hours. #703779..................................$118,500

Versatile 145 6970 hours. #707807.$6500

2009 Case IH Puma 195 1725 hours. #703770..................................$109,500

GRAIN CART

2005 Brent 880 #707744..............$31,000

2009 Case IH 9120 377 hours. #700619.... . ..............................................$262,000 2009 Case IH 9120 819 hours. #700618.... . ..............................................$252,000 2012 Case IH 8230 253 hours. #703817.... . ..............................................$310,000 2011 Case IH 8120 #703806.......$309,000 2011 Case IH 8120 #703807......$309,000 2011 Case IH 8120 261 hours. #703803.... . ..............................................$305,321 2011 Case IH 8120 #707849.......$281,900 2011 Case IH 8120 226 hours. #707673.... . ..............................................$279,900 2012 Case IH 8120 202 hours. #707823.... . ..............................................$276,000 2012 Case IH 8120 #707824......$276,000 2010 Case IH 8120 521 hours. #707680.... . ..............................................$269,900 2009 Case IH 8120 1043 hours. #703732.. . ..............................................$243,500 2008 Case IH 8010 587 hours. #700626.... . ..............................................$234,000 Case IH 8010 2045 hours. #707646........... . ..............................................$178,833 2003 Case IH 8010 #700647.......$169,000 2004 Case IH 8010 2512 hours. #703561.. . ..............................................$144,900 2009 Case IH 7120 589 hours. #500584.... . ..............................................$232,789 2009 Case IH 7088 #700629.......$219,000 2007 Case IH 2588 1357 hours. #703788.. . ..............................................$181,900

John Deere 110 616 hours. #706700......... . ................................................$25,900

TILLAGE

2007 New Holland T7040 #707786........... John Deere 965 #706736................$7900 . ................................................$96,900 International 140 plow. #706725.....$4500

COMBINES

2004 Case IH 2388 1626 hours. #703713.. . ..............................................$149,500 2003 Case IH 2388 2013 hours. #700557.. . ..............................................$144,900 2004 Case IH 2388 #700622.......$142,330 2003 Case IH 2388 1517 hours. #707758.. . ..............................................$139,000 2005 Case IH 2388 1844 hours. #703772.. . ..............................................$138,750 2005 Case IH 2388 1969 hours. #700593.. . ..............................................$134,900 1999 Case IH 2388 2629 hours. #707683.. . ................................................$98,700 2000 Case IH 2388 #706646........$93,500 1998 Case IH 2388 2300 hours. #707813.. . ................................................$93,500 1997 Case IH 2188 2024 hours. #700392.. . ................................................$68,899 1995 Case IH 2188 3965 hours. #703506.. . ................................................$40,444 1990 Case IH 1680 3000 hours. #700646.. . ................................................$31,000 1986 Case IH 1680 2683 hours. #700598.. . ................................................$28,900 1987 Case IH 1680 3667 hours. #703691.. . ................................................$27,689

BALE PROCESSORS

2005 Haybuster 2650 #700597....$12,500 Haybuster 256 Plus II 1000 hours. #500560.......................................$9500 Haybuster S2000 #706637..............$8500

1986 Case IH 1680 4110 hours. #703810.. . ................................................$26,500 2003 John Deere 9750STS 2843 hours. #706708..................................$121,000 1990 Massey-Ferguson 8570 3144 hours. #706734....................................$31,900 2011 New Holland TR96 4871 hours. #707804....................................$23,500

1972 John Deere 401 #706692.......$8900

MISCELLANEOUS

Case IH 5300 drills. #706737...........$5500 New Holland Super 1048 balewagon. #707377....................................$15,100 Case IH 710 loader. #706671...........$7500 Case IH 100 rakes. #706727..............$500

HEADERS

2011 Case IH 3016 #707715........$25,575 2009 Case IH 2152 #703808........$68,500 2012 Case IH 2152 #703816.........$65,500 2012 Case IH 2152 #707834............... Call 2008 Case IH 2152 #700639........$64,500 2011 Case IH 2152 #703804........$63,500 2011 Case IH 2152 #703805........$63,500 2004 Case IH 2042 #703802........$30,987 2004 Case IH 2016 #707839........$16,500 1997 Case IH 1020 #700595........$15,000 1997 Case IH 1020 #700596........$15,000 Case IH 1015 #703790....................$7950 Case IH 1015 #703682....................$7499 Case IH 1015 #700638....................$5600 Case IH 1015 #703684....................$5900 Case IH 1015 #703693....................$4500 1999 Case IH 1010 #706739.........$10,500 1993 Case IH 1010 1000 hours. #703656.. . ...................................................$8400 Case IH 1010 #703811....................$7700 Case IH 1010 #707838....................$6100 1993 Case IH 810 #703707.............$3800 Case IH 810 #703709......................$3500

2010 MacDon D60 #707548.........$54,200 2010 MacDon D60 #707559.........$54,200 2004 MacDon 963 #703491..........$39,900 1998 MacDon 962 #500626..........$26,000 MacDon 962 #700644...................$13,000 MacDon 960 #700535...................$17,456 1993 MacDon 960 #703763..........$15,500 MacDon 960 #703764...................$15,500 1993 Honey Bee SP42 #703718..$25,900 2003 Honey Bee SP36 #703733..$45,500 Honey Bee SP36 #700623...........$34,500 2002 Honey Bee SP36 #700594..$34,000 1992 Honey Bee SP30 #700643..$22,500 Honey Bee ST30 #703530...........$17,320 2003 New Holland 88C #700641.$44,500 2001 New Holland 2328 #703643...$9800 New Holland 2326 #706414............$4950 2001 New Holland 2326 #706699...$4900 1998 New Holland 2324 #706657...$2900 New Holland 971 #707782..............$6500 New Holland 971 #707783..............$6500 New Holland 971 #707805..............$6500

Ethridge, Montana

406-339-2222

Great Falls, Montana

406-453-1453

Lewistown/Denton, Montana

406-538-8795

Havre, Montana

406-265-5887

Billings, Montana

406-252-8614

Inventory Photos, Parts Catalogs, Job Opportunities

@ WWW.TORGERSON.BIZ www.casecorp.com

Trader’s Dispatch, October 2012 — Page C19

TRACTORS – 100 hp to 174 hp

SPRAYERS

1974 JI Case 1370 4465 hours. #703739.. . ................................................$12,900 2010 Case IH Maxxum 140 Limited 508 hours. #707645.........................$97,500 2011 Case IH Maxxum 125 428 hours. #703809....................................$95,000 1972 John Deere 7520 1072 hours. #500639.......................................$8235 JI Case 1030 5543 hours. #707793..$5800

2010 Case IH Maxxum 125 Limited 533 hours. #703777.........................$92,750 2002 New Holland TV140 4100 hours. #706735....................................$82,900 2010 McCormick XTX145 426 hours. #707691....................................$97,000

ROUND BALERS

2006 Case IH MXM155 5177 hours. #500625....................................$71,097 1998 New Holland TV140 4120 hours. #707668....................................$63,900 1998 John Deere 7710 6714 hours. #707701....................................$84,900

SQUARE BALERS

2002 Case IH MX120 4388 hours. #703792....................................$63,500 2007 Case IH Maxxum 115 1985 hours. #703812....................................$65,500

2009 New Holland BB9080 71 hours, #706681..................................$108,000 1997 New Holland 580 #706715..$10,250 New Holland 1425SP #707832.......$7500 New Holland 1283SP #707817.......$7500

WINDROWERS & MOWER CONDITIONERS

2009 Case IH WD1203 686 hours. #707747....................................$79,900 2009 Case IH WD1203 810 hours. #707746....................................$79,900 2010 Case IH WD1203 286 hours. #707545....................................$65,000 2005 Case IH WDX1202 1418 hours. #500562....................................$59,900 1996 Case IH 8820 #707781.........$27,850 2006 MacDon 9352i 805 hours. #703783.. . ................................................$64,800 2002 MacDon 9350 #707842.............. Call 2009 New Holland H8060 243 hours. #705428..................................$115,984 2010 New Holland H8080 623 hours. #500654....................................$98,000

2011 New Holland H8040 425 hours. #500663.......................................... Call 2007 New Holland HW365 324 hours. #707777....................................$81,000 New Holland 1116 #500481............$1995 Agco 9345 220 hours. #706557....$79,900 1996 Hesston 8400 #500643........$22,500 1975 John Deere 2270 1489 hours. #707802.......................................$8500 2003 Case IH HDX162 #707609...$14,000 2008 New Holland 1475 #706551.$31,900 New Holland 1475 #707766.........$25,500 2006 New Holland 1475 #706723.$19,200 New Holland 1431 #706602.........$11,500 1991 New Holland 499 #706712.....$8950 New Holland 1112 #700634............$8900 Hesston 1014 #500545....................$3750

2012 Case IH Patriot 4430 self propelled, 285 hours. #703818................$313,000 2010 Case IH Patriot 3330 self propelled, 818 hours. #707685................$247,368 2009 Case IH SPX3330 self propelled, 990 hours. #707740.......................$226,586 2007 Case IH SPX 4420 self propelled. #703785..................................$199,500 Spra-Coupe 3430 self propelled.#706659. . ................................................$24,900 Marflex 90 3-pt/mounted. #707796............ . ..............................................$109,500 2007 Case IH SRX160 pull type. #707822. . ................................................$29,000 2008 Summers Ultimate pull type. #703750....................................$34,900 2005 Summers Ultimate pull type. #700627....................................$25,000 2008 New Holland SF216 pull type. #707845....................................$31,000 2002 Flexi-Coil 67XL pull type. #707578... . ................................................$16,789 2002 Flexi-Coil 67XL pull type. #700497... . ................................................$15,789 2001 Flexi-Coil S67XL pull type. #700635....................................$15,500 2005 Flexi-Coil 67XL pull type. #707779... . ................................................$14,000 Flexi-Coil 65XL pull type. #707808.. $7900 2005 Brandt QF2500 pull type. #707850... . ...................................................$9500

2001 New Holland TM125 6701 hours. #706631....................................$40,900

AIR DRILLS

2010 Case IH Precision Hoe. #703745..... . ..............................................$223,000 2010 Case IH Precision Hoe. #707686..... . ..............................................$222,105 2004 Case IH Concord 6012 #500672...... . ................................................$64,900 Case IH Concord 6012 #703765..$42,500 Case IH Concord 4812 #703635..$36,666 2005 Flexi-Coil 5000 #703801......$89,900 1994 Flexi-Coil 5000 #500633......$65,000 Flexi-Coil 5000 #700620...............$49,000 Flexi-Coil 5000 #700650...............$46,900 1997 Flexi-Coil 5000 #700649......$45,900 John Deere 1820 #500673...........$86,000

2012 Case IH RB564 #707837.....$39,500 1999 Case IH RS561 #703793......$18,500 2010 New Holland BR7090 #706717........ . ................................................$36,900 2010 New Holland BR7090 #700637..Call 2011 New Holland BR7090 #500656........ . ................................................$33,789 2006 New Holland BR780A #500653....... . ................................................$19,300 2003 New Holland BR780 #706555.......... . ................................................$15,987 2003 New Holland BR780 #500652............. .................................................... $15,546 2003 New Holland BR780 #706591............. .................................................... $15,420 2003 New Holland BR780 #500536............. .................................................... $15,200 2005 New Holland BR780 #500661............. .................................................... $15,000 2003 New Holland BR780 #700567.$14,789 2003 New Holland BR780 #707806.......... . ................................................$13,000 2002 New Holland 688 #703796..$15,800 New Holland 688 #707770...........$11,000 1998 New Holland 664 #703791..$12,900 New Holland 664 #706574...........$10,900 1995 New Holland 660 #500580..$11,500 1994 New Holland 660 #703795.....$6900 2004 John Deere 567 #707798....$24,000 1998 John Deere 566 #706738....$17,250 1998 John Deere 566 #706689....$15,700 1998 John Deere 566 #707797....$11,500 John Deere 535 #500668................... Call Agco 5456A #700568...................$26,900 New Idea 4665 #706611..................$9900

Ethridge, Montana

406-339-2222

Great Falls, Montana

406-453-1453

Lewistown/Denton, Montana

406-538-8795

Havre, Montana

406-265-5887

Billings, Montana

406-252-8614

Inventory Photos, Parts Catalogs, Job Opportunities

@ WWW.TORGERSON.BIZ www.casecorp.com

Trader’s Dispatch, October 2012 — Page C20

WANT TO BUY

Old wood boat Chriscraft, Century, Garwood, etc. Call Mark 406-880-5473

Full Service Ag Repair Starter – Generator – Alternator Service Air Conditioning Welding

Quality Work – Reasonable Rates

Dave’s Repair LLC

West Post Creek Road, Charlo, Montana Business cell phone 370-6229 - Home (406) 644-2241

LAND ROLLERS

single & tandem rollers available

42”x 5/8” pipe

Bolt on Hitch ➔

➔

H 12-ft. H 16-ft. H 14-ft. H 18-ft. H 20-ft.

Other sizes also available

SPECIAL OFFERING

48” diameter x 11/2” thick and 42” diameter x 1” thick Available in limited lengths

Fisher Metal Products 622-5233

Fort Benton

1-800-449-5233

MDOC announces Economic Development Grant awards

The Montana Department of Commerce (MDOC) has awarded a total of $1,252,871 in Big Sky Economic Development Trust Fund grants to various Montana organizations to promote business growth across the state. BSTF is a state-funded program designed to promote good-paying jobs and long-term, stable economic growth in Montana. BSTF provides funding for both planning and job creation activities. BSTF job creation grants can provide grant assistance to basic sector Montana businesses, who are hiring net new positions within their company. BSTF planning funds are awarded to local Certified Regional Development Corporations (CRDC), tribal governments and local economic development agencies, to assist in planning efforts. “Big Sky Economic Development Trust Fund Grants help to grow businesses, plan for future development and create jobs,” said Dore Schwinden, Director of the Montana Department of Commerce. “These grants work to expand Montana’s economy and help local leaders to invest smartly in our communities.” Flathead County Economic Development Authority received three BSTF job creation awards, totaling $937,350, to assist the following businesses: ZaneRay Group received a $67,350 BSTF award for equipment purchases and lease rate reduction which will enable business expansion, culminating in at least 10 net new BSTF eligible jobs. ZaneRay Group, which is located in Whitefish, is an Ecommerce consultant group. They specialize in directto-consumer web sites for mid to large size companies in the outdoor industry. SmartLam, LLC received a $217,500 BSTF award for equipment purchases which will enable business expansion, culminating in at least 29 net new BSTF eligible jobs. SmartLam’s administrative offices are in Whitefish but operations are located in Columbia Falls. SmartLam manufactures a cross laminated timber product that will be used as rig mats and portable platforms to support drilling rigs and equipment used in construction for oil services industry. Nomad Global Communication Solutions (GCS) received a $652,500 BSTF award for equipment purchases and for employee training certifications which will enable business expansion, culminating in at least 87 net new BSTF eligible jobs. Nomad GCS, which is located in Kalispell, is a leading provider of advanced interoperable communication solutions to the public and private sectors. MDOC also awarded nine BSTF planning grants to seven different Montana entities. The planning awards include the following: Bitterroot Economic Development District (BREDD), located in Missoula, received $17,094 of BSTF funds to complete a feasibility study for Pimlico Studios, Inc. Pimlico Studios is a start-up business that plans to build and operate a motion picture and television sound stage and production facility in Missoula. This project could result in a service that is currently unavailable in Montana and will have the potential of capturing additional film days; resulting in thousands of dollars being spent in the State during the filming of movies.

Great Northern Development Corporation (GNDC), located in Wolf Point, received $21,000 of BSTF funds to assist Sand Creek Winds, LLC with the completion of a feasibility study. The feasibility study is necessary for the wind farm to be able to connect to the Western Area Power Administration (WAPA) power grid. If fully developed, the wind farm, which is proposed to be located in McCone County, could have the potential to generate approximately 50 to 70 megawatts of green energy. Great Northern Development Corporation (GNDC), received $100,000 of BSTF funds to assist coalition efforts in Eastern Montana with an impact study to encompass a 16-county area that has been impacted by the recent oil and gas development in Montana. GNDC has teamed with Eastern Plains Economic Development Corporation, Southeastern Montana Development Corporation and Richland County Economic Development with this project. Prospera Business Network, located in Bozeman, received $15,750 of BSTF funds to assist the City of Livingston with a branding campaign. The Livingston Branding project will be a comprehensive, collaborative community project to develop a sustainable branding campaign for the community with the hopes of attracting travelers to visit their community. Prospera Business Network received $57,750 of BSTF funds for the completion of a preliminary engineering report for the community of Gardiner. The overall scope of the PER will focus on making fundamental improvements in the infrastructure to address vehicular traffic congestion, parking, streets, pedestrian access/sidewalks, drainage/utilities, infrastructure, lighting and other public amenities within the community of Gardiner. Headwaters Resource Conservation & Development (RC&D) Area, Inc., which is located in Butte, received $8,000 of BSTF funds to assist Montana Biochar with the completion of a feasibility study. Biochar is a type of charcoal produced in the conversion of biomass or feedstock. Montana Biochar is located in Anaconda and is interested in evaluating whether biochar produced from regional biomass stocks could produce a value added project from biomass resources. Montana Business Assistance Connections, which is located in Helena, received $44,677 of BSTF funds to assist International Biomass Group (IBMG) with the completion of an electrical preliminary engineering report. IBMG is in the process of building the first of several manufacturing plants in Montana that produce a hybrid woody biomass pellet that can either be co-fired with coal or replace coal in smaller boiler facilities. Chippewa Cree Tribe received $26,250 of BSTF funds for the completion of a preliminary engineering report for the Middle Dry Fork area. The Middle Dry Fork area has been designed as a tribal development area for future community buildings, including the new tribal clinic. Fort Belknap Indian Community Council received $25,000 of BSTF funds for the completion of a comprehensive appraisal of the paleontological and archeological resources on the Milk River Ranch, which is located 25 miles north of Gildford in Hill County.

Trader’s Dispatch, October 2012 — Page C21

big EQUIPMENT CO. 1287 Hwy 87 West, HAVRE, MT FAX: 406-265-9367 www.bigequipment.com RON HARMON - MANAGER/OWNER CELL: 406-265-0096 HOME: 406-265-9808 EMAIL: rrharmon@aol.com

TRACTORS & CONSTRUCTION EQUIPMENT

406-265-9554 OR 888-265-9554

Email: bigequip@bigequipment.com WAYLAND WALLS Parts Manager 888-265-9554 406-265-9554

ROGER WILDE CELL: 406-470-0321 OFFICE: 403-345-4847

AIR & CONVENTIONAL DRILLS

(2) 2012 Seed Master drills. 70-ft., 12” spacing, compact transport, 300 bushel on board. Numerous tank options of tow behind/between tanks, capacity up to 860 bushels...................CALL FOR DETAILS

Big Bud 950/50 950 hp, 2610 Twin Disk transmission and torque with hydraulic upgrades, Clark 85,000 lb. axles, new upgraded closed center hydraulics with flow control.......................................$349,500 Big Bud 600/50 KT 1150 motor, major component work, twin disk transmission, 75,000# Clark axles, new paint, new 30.5x32 tires...... ............................................................................................$150,000 Big Bud 600/50 recent new close centered hydraulic for air drill, 30.5x32 duals @ 60%, new interior, new paint..................................$125,000 Big Bud 600/50 600 hp, rebuilt Twin Disk transmission and torque, 9 speed...................................................................................$125,000

2000 Flexi-Coil 7500 air drill, fold back type, 60-ft. x 12” spacing, 2340 variable rate cart tow behind, single or double shoot........... $45,000 2-2012 Ezee-On 6650 heavy duty discs. Great for CRP Rec. Each....... . ........................................................................................... $69,500 2007 Case IH Flexi-Coil ATX700 70-ft., 12” spacing, 41/2” steel packers. Very clean............................................................................ $94,500

Concord 50-ft. air drill, 12” spacing, 3400 tow behind tank. Very clean.. ..............................................................................................$39,500

Big Bud 600/50 (650/50) 650 hp, Series IV cab, quad 20.8x42 tires @ 75%, low hours. Very clean..................................................$179,500 Big Bud 550/50 550 hp, 2610 Series transmission, 70,000 lb. Clark axles, new paint and interior..........................................................$125,000 Big Bud 525/50 rebuilt transmission........................................$110,000 Big Bud KT450 1150 Cummins 450 hp, 13 speed Fuller transmission, 70,000# Clark axles, needs paint..........................................$29,500 1976 Big Bud HN320 700 hours on Cummins Recon Big Cam IV, 360 hp, rebuilt 12513 Fuller transmission, recent paint, tires, decals, Clark axles.......................................................................................$49,500 2002 Case IH STX450 4WD, 5 remotes, 710x38 duals at 50%, 5500 hours....................................................................................$115,000 2010 Case IH Puma 210, full auto guidance, rear weight package, 3 remotes, 650 hours.............................................................$149,500 1992 Case IH 7120 Magnum 7400 hours, Leon 808 front end loader, no 3-point, 540/1000 PTO.....................................................$59,500 Case 1030 with Case 70 loader, 100 hp, cab, PTO. Very clean..$11,500 Case 1030 with loader, no bucket, PTO........................................$7500 2008 Cat Challenger 965B Cat C18 engine 510 hp, 16 speed Powershift, 4300 hours..........................................................................$179,500 1997 Cat Challenger 65D 300 hp, 1800 hours, 30” track, 10 speed powershift, 4 hydraulics, bareback........................................$89,000 2001 John Deere 9400 6450 hours, without 3 point. 710/38 tires approximately 50%..................................................................$110,000 With 3-point...............................................................................$115,000 John Deere 7730 with 746 SL loader, almost like new, 7275 hours, 2 function electric joystick.......................................................$129,500 John Deere 7410, cab, air, 3-pt., PTO, 740 loader, grapple, 4500 hours. Very clean..............................................................................$69,500 John Deere 4020, 8 speed, 3-pt., PTO, no cab, gas. Good condition..... .................................................................................................$9500 Steiger ST470 525 hp, powershift, 30.5x32 duals @ 60+%, rebuilt motor, clean unit...............................................................................$75,000 Steiger ST470 4WD, 1150 Cummins, 5 hydraulics, 30.5x32 duals at 70%, 6000 hours...................................................................$69,500

2003 Bourgault 5710 with 5350, 57-ft. 3 section tow behind tank......... . ........................................................................................... $98,000

2000 New Noble 42-ft. tow behind air cart with 7” spacing........$39,500 Morris 6180 34-ft.x7” air drill, 180 bushel tow behind cart.........$29,500 4-John Deere 9350 drills with fertilizer, steel packers. Each.........$1500

TILLAGE EQUIPMENT

2006 Flexi-Coil 5000 57-ft. drill, 9” spacing, tow between 3450 tank, 430 bushel................................................................................ $115,000 2000 Flexi-Coil 5000 air drill, 12” spacing, single shoot (can be double shoot), 3450 tank................................................................. $65,000 1995 Flexi-Coil 5000 39-ft., 12” spacing, 2320 tow between tank, rubber packers, single shoot........................................................... $39,500

COMBINES

2012 Case IH 8120 0 hours. Fully loaded................................$314,500 2004 Case IH 8010 2040 separator hours, 2700 engine hours, has IH 2020 30-ft. flex head, 2006 newer engine, updated feeder house, upgraded Pro600 monitor, Contour Master, chopper, long auger, moisture/yield...............................................Combine only $175,000 With header.........................................................................$200,000 2009 Case IH 7120 400 separator hours, Pro 600 monitor......$228,500 1993 Case IH 1688 3243 engine hours, new heavy clean grain boot with cross auger, update to 11/4” shaft..........................................$45,000 1987 New Holland TR96 3000 separator hours........................$39,000 John Deere 9770 750 separator hours, custom cutter package duals, 2WD, nice machine..............................................................$195,000 2004 John Deere 9760............................................................$165,000 John Deere 9760 STS, John Deere 630 head. Without head..$149,500 With head...........................................................................$165,400 2003 John Deere 9750............................................................$110,000 John Deere 9660 STS, 1200 engine hours, chopper, 30-ft. auger, 18.4x42 singles, bin extensions........................................................$182,000 2005 John Deere 9660............................................................$159,000 2004 Cat Challenger 670 600 separator hours, with pickup....$155,000 Gleaner R60, 2882 hours...........................................................$22,500 Gleaner N6, 2250 hours, 24-ft. header and pickup reel.............$10,000 1983 Gleaner N7........................................................................$10,000

HEADERS & ATTACHMENTS

Versatile 1150 525 hp, 30.5x32 duals........................................$59,500 Versatile 895 4WD, 310 hp, 24.5x32 duals, air drill return line. Good condition................................................................................$37,500 Allis Chalmers HD-5 dozer, draw bar, ROPS, canopy.................$7500 Wagner 17, factory installed 318 Detroit diesel engine, 23.1x30 tires, factory duals, dual hydraulics. Rare, all original, good condition........ ..............................................................................................$29,500

2005 MacDon 973 36-ft. header, pick up reel, transport............$45,000 2002 MacDon 972 draper table, hydraulic fore and aft. pickup reel, P auger, transport.....................................................................$30,000 (2) MacDon 962 36-ft. header, John Deere adapter, pickup reel, transport. Each......................................................................................$25,000 Case IH 1010 30-ft. header, pickup reel, hydraulic fore/aft. Very clean... .................................................................................................$9500 John Deere 930 header, regular reel............................................$8000 (2) Allis-Chalmers 313 pickup header, Melroe attachment. Each..$3000 Variety of headers & variety of brands/prices vary - CALL

2004 Summers 60-ft. harrow......................................................$22,500 Krause 1907 24-ft. disc, 10” spacing, 22” front discs, 23” back discs...... . .................................................................................................. Call

SWATHERS

1998 MacDon 9300, 1995 30-ft. draper header, pickup reel, hydro transmission, 4345 hours......................................................$39,500 1979 International 5000 swather, diesel motor, 14-ft. hay head, without conditioner, runs good..............................................................$4500

MISCELLANEOUS

Summers sprayer, 100-120 ft. wide, 1000 gallon tank, monitor, 2 boom switch.......................................................................................$6950 Bron plow with winch, chutes, parts...........................................$65,000 LaTourneau trencher/pipe layer.................................................$12,000 MacDon 14-ft. hay head, conditioner............................................$8500 1983 GMC 6 ton fertilizer spreader truck, 8.2 Detroit engine, Allison transmission, Raven controller, GPS, light bar......................$20,000 (2) Ford B700 restored school buses, 24 passenger, diesel motor, 6 cylinder. Each............................................................... Make Offer Single axle 2 horse trailer................................................................$800

We are a dealer for Air Drills &

Tanks & Products

Trader’s Dispatch, October 2012 — Page C22

NEED CANOLA HAULED TO CANADA? B & J Trucking is licensed and insured for Canada. For rates call: Jeff or Tami Strand 406-755-6431

LUMBER ROUGH-CUT

Accurate, full-dimension lumber. Fir or Pine. Custom orders of any size. Corrals • Windbreak • Barns • Fences Beams • Siding • Decks • Bridges Gregg and Robin Maxwell, Maxwell Lumber Inc. 406-538-7877 Lewistown, Montana

Commercial Series Two-Way Radios and Accessories

CP150™ CP200™ CM200™ CM300™

Upgrade

to the required 12.5 narrow band radios before 2013

Seven Essential Elements of Solid Two-Way Communication The Commercial Radio Series Combines Them All. With the new Radius® Commercial Series mobile and portable radios, you get solid two-way performance at a very competitive price. Clear, crisp audio and dustomizable features let you communicate exactly how you want. With their ergonomic design and wide assortment of Motorola Original® Accessories, these radios are ready wherever your work takes you.

Call Us Today! Highline Communications

North 202 Central, Cut Bank, Montana Phone 406-873-2984 Fax 406-873-4895 highcomm@theglobal.net

Jacob McKelvey, Highline Communications, 406-873-2984

The food at the Yellowstone River Conservation District Council Summer Tour was excellent as evidenced by the smiles in the picture above.Photo courtesy of Carol Watts, Custer County Conservations District.

Survey tells serious story of drought’s impact on cattle producers

The 2012 Missouri Beef Tour drew a crowd of nearly 300 cattle producers from Missouri, Kansas, Oklahoma and Arkansas to Lawrence County. Tour hosts were Shiloh Land and Cattle Co., Jackie Moore Ranch, Dustin and Scynthia Schnake and Clif and Alice Harrington. In addition, attendees viewed beef and forage research projects at the University of Missouri’s (MU) Southwest Research Center just south of Mt. Vernon. “During the tour guests were asked to complete a survey regarding their plans to cope with the drought,” said Eldon Cole, a livestock specialist with MU Extension. “We learned a lot from the 85 surveys that were filled out and returned.” Survey answers The first question asked producers how far into the winter their current forage supply take them. The majority (34.1 percent) felt they could make it until March 1. April 1 received a 25.6 percent vote and 17.1 percent felt they could only make it until January 1. Exactly 17 percent said they would run out of forage by December 1. The second question asked, “will you have more, less or the same number of beef cows next April as you have now?” Fortynine percent indicated they would have fewer cows. Their average percent reduction in cows was 17.4 percent. The range went from 5 percent to 50 percent less. Only 5 replies (6.1 percent) felt they would increase

their cow numbers this winter. Thirty-eight farmers said they would remain the same in beef cow inventory in the next 8 months. The last question asked, “What management practice will you employ to extend your forage supply?” There were a wide variety of practices suggested. The two top vote-getters were to save forage by various practices and plant emergency pasture species. Saving forage edged out the planting plans by a 25 percent to 24.4 percent vote. The forage saving ideas included: strip grazing, rotating pastures, limit feeding of hay, buying improved hay rings and restricting time to graze pastures. Planting emergency grazing crops saw wheat, ryegrass, cereal rye and turnips as crops being planted soon. Selling open cows and those that are less productive came in as the third most popular practice with 14 percent close behind at 11.6 percent was to wean and sell calves early. Just over 9 percent offered supplement feeding of by-products like dried distillers grains or commercial products. Down the line, and mentioned only by 1 to 3 farmers included: feed silage, corn stalks, ammoniate low quality hay, cut trees, fertilize fescue pastures and buy or rent more pasture. The annual Missouri Beef Tour is coordinated by University of Missouri Extension Commercial Agriculture with the following sponsors: Missouri Beef Industry Council, Missouri Soybeans, FCS Financial, Missouri Cattlemen’s Association, Missouri Conservation Commission and Missouri Corn Growers.

Rooting a croton

visit our web site: lewistownhonda.com

Lewistown Honda

302 Truck Bypass, Lewistown, MT 59457 406-538-9435

1-800-823-0226

By Ron Smith, Horticulturist, NDSU Extension Service Q: Can I root a croton in water? A: It is not a good idea. Crotons should be rooted in a pasteurized media that you can purchase from a garden center. Generally, roots that develop in water are not stable. The new plant will have a difficult time establishing itself when moved into a container with soil. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu.edu.

Reduce the risk of a combine fire

By NDSU Extension Service Farmers are reporting an increase in combine fires this harvesting season. “No doubt, the extended dry weather has increased the fire danger on combines, but there are several other factors that can cause fires,” says John Nowatzki, North Dakota State University (NDSU) Extension Service agricultural machine systems specialist. “Combine operators can reduce the risk by recognizing the problem areas and acting to reduce the potential for fires.” Crop residue buildup around combine engines and exhaust pipes are obvious places where fires can start. The surface temperature of exhaust pipes can be high enough to ignite straw and chaff. Operators should check these areas regularly throughout the day and remove any buildup of chaff, straw and dust. The shields and covers on older-model combines generally are less effective than the covers on newer machines at preventing residue buildup around engines. “Loose belts and worn bearings can create enough heat to ignite crop residue,” Nowatzki says. “Operators need to monitor these conditions regularly. Shut down the combine and stop the engine to check the belts and bearings for potential fire hazards. Remove any buildup of dust and crop residue in contact with shafts, pulleys and bearings. Newer combines may be equipped with sensors to alert operators to potential hot spots. Operators still need to find those locations and make sure the area is free of debris.” Exposed wires and worn insulation can cause electrical sparks that can lead to fires. If electrical fuses blow, operators should suspect the cause may be exposed wires. Inspect wiring harnesses to make sure there are no exposed wires. Leaking hydraulic cylinders, hoses and fuel, and hydraulic tanks are obvious conditions that cause combine fires. Repair leaks immediately and wipe off any spilled oil and fuel. Be particularly careful while refueling. Turn off the engine and let it cool before refueling. “Always have an approved, regularly maintained fire extinguisher in every combine, tractor, truck and pickup used in the harvesting operations,” Nowatzki says. “Check the condition of each fire extinguisher daily. Finally, have the local fire department’s telephone number recorded in the cab of all the machines and vehicles and listed in your cell phone.”

Payments arrive with direct deposit, no matter what

By Nicole Tiggemann, Social Security Public Affairs Specialist in Denver These days, almost everyone gets their benefit payment by direct deposit. Whether you receive Social Security or Supplemental Security Income (SSI), you can depend on your payment arriving in your account on time, every time. If you don’t already have direct deposit, there are good reasons to sign up. For one, less money and time spent driving to the bank to cash your check helps you save. Second, with direct deposit, you know your payment will be in your account on time no matter what, especially in unexpected circumstances like the recent wildfires and hurricane weather. For years, Social Security has stressed the convenience, security, and safety of getting benefit payments electronically. Soon, direct deposit (or Direct Express) will not only be the best way to receive Federal benefit payments — it will be the only way. That’s because the U.S. Department of the Treasury announced a new rule that will phase out paper checks for Federal benefit and non-tax payments by March 1, 2013. People receiving benefits have the option of direct deposit to a bank or credit union account (of their choice) or into a Direct Express Debit MasterCard card account (a Treasury-recommended prepaid card option). If you still get your check in the mail, you don’t need to wait for the new rule to go into effect to enjoy the benefits of electronic payments. Please visit http://godirect.org/ today to learn more and begin getting your Social Security and SSI payments the safe, easy, inexpensive, and green way — electronically.

Trader’s Dispatch, October 2012 — Page C23

SMALL SQUARE HAY BALES FOR SALE 2nd cutting alfalfa and 1st cutting round bales with twine in Malta, Montana Phone (406) 390-0270, Malta, Montana

Superior Genetics Locally Grown

H AP503CL2

Certified, PVP The First Two Gene Tolerant Clearfield Winter Wheat

H Hawken Certified, PVP H Jagalene Certified, PVP H Art Certified, PVP AgriPro’s newest option

H SY WOLF Certified, PVP AgriPro’s newest option

Other Varieties 3 Judee Certified, PVP Solid Stem - Sawfly Tolerant.

3 Genou Certified, PVP Solid Stem - Sawfly Tolerant.

3 Quake Certified, PVP Solid Stem - Sawfly Tolerant.

3 Yellowstone Certified, PVP

3 Willow Creek

MSU beardless forage winter wheat

Certified Seed Cleaning Plant

406-423-5600

FAX 406-423-5665 101 Indian Butte Road Moccasin, MT 59462

Trader’s Dispatch, October 2012 — Page C24

FARM EQUIPMENT FOR SALE Case IH 9180 tractor. Case IH 9280 tractor. 20-ft. of John Deere 9400 grain drills. 16-ft. hay rack. Phone Doug Ross, (406) 473-2357, Judith Gap, MT

WANTED TO BUY Farm or Farm/Ranch Unit Expiring CRP is OK also.

Phone (406) 875-2280, Pompeys Pillar, MT

SICKLE MOWER FOR SALE

Jari 36”, 5 hp sickle mower, runs good.... $1450 Phone 406-452-0300

WANTED TO BUY

Fire damaged or non-running tractors

TRACTORS WANTED

Allis-Chalmers, John Deere, IHC, Moline, Massey-Ferguson or what have you got? NEED ALL MECHANICAL FRONTS. International 806, 1206, 1256, 1456; Allis Chalmers D21, pieces or parts; Minneapolis-Moline AT1400 or AT1600; Oliver 4WD’s

Phone Circle G Salvage

Robert Grube, 403 Emmerling Circle, Walhalla, ND 58282

Tractor and Combine Buyers

Phone 701-549-2737 or 701-265-2220 leave message Please send pictures to: E-mail: bomar@utma.com

2012 NDSU Harvest Bowl Agribusiness Award recipient named

By NDSU Extension Service Neal Fisher, North Dakota Wheat ComAssociates, Agricultural Trade Advisory mission administrator, will receive the Committee of the Office of the U.S. Trade 2012 Agribusiness Award during the 39th Representative and USDA in Washington, annual Harvest Bowl program at North D.C., serving at the pleasure of the presiDakota State University (NDSU). dent and U.S. secretary of agriculture. This award recognizes individuals who Fisher chairs the Upper Great Plains have distinguished themselves in the field Transportation Institute’s Advisory Counof agriculture and business in North Dacil and is a member of the NDSU Rekota and beyond. search Foundation board of directors. He Harvest Bowl activities will take place previously served on the State Board of on October 26-27 in Fargo. Agricultural Research and Education, asAlso honored will be outstanding agrisisting with the prioritizing, budgeting and culturists from all counties across North policymaking associated with the research Dakota and several in western Minnesota, projects and initiatives of the North Daand scholarships will be awarded to outkota Agricultural Experiment Station and standing male and female NDSU athletes. NDSU Extension Service. As administrator of the North Dakota Fisher joined the commission in 1978 Wheat Commission, Fisher is responsible as a marketing specialist, became deputy for implementing producer-funded proadministrator in 1983 and was appointed grams intended to increase the total use of administrator in 1998. He earned his bachNorth Dakota wheat. Fisher works directly elor’s and master’s degrees in agricultural in the areas of export market development, economics at NDSU. research, transportation, trade policy and While Fisher’s professional focus is other issues to improve the global comwheat, his true passion is his family, the petitiveness of North Dakota producers state and its people. He notes that he is who raise hard red spring, durum and other forever grateful for the life lessons and wheat classes. opportunities he has had growing up in His work for the Wheat Commission North Dakota and continues his interest in the family farming and ranching enterprise is a worldwide effort through U.S. Wheat near Tappen, where his son, Josh, is the Associates and the cooperator programs principal owner/operator. Fisher and his of the U.S. Department of Agriculture’s wife, Deborah, have three grown children Foreign Agriculture Service. and two grandchildren. Fisher’s presentations on spring wheat The 39th annual Harvest Bowl festiviand durum include supply-and-demand ties begin Friday, October 26, at the Fargo analysis, and highlight the economic Ramada Plaza Suites with a dinner and and quality advantages of using hard red awards ceremony. On Saturday, honorees spring wheat, durum and other wheat in will participate in educational sessions on foreign and domestic customer applicathe NDSU campus and attend the Harvest tions. Bowl football game. Fisher coordinates the North Dakota For tickets and information on Harvest Wheat Commission’s policy positions and Bowl activities, visit the NDSU Alumni actions on issues affecting wheat producAssociation website at http://www.ndsuaers, and serves on numerous committees lumni.com/, call the NDSU alumni office and boards involved in trade policy develtoll-free at (800) 279-8971 or locally opment and wheat research. at (701) 231-6800, or e-mail marilyn@ He is a member of the Joint Trade ndsualumni.com. Policy Committee of the National Association of Wheat Growers and U.S. Wheat

Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks

All products meet EPA/SPCC agriculture standards

CALL FISHER METAL PRODUCTS for information and pricing on: Horizontal Fuel Tanks from 500 to 3000 gallons Vertical Fuel Tanks 4000 to 10,000 gallons ALL TANKS are UL 142 Certified –– DOUBLE WALL TANKS meet SPCC Secondary Containment Rules

Fisher Metal Products

Fort Benton

Tier 1 and Tier 2 spcc compliance plans available at no charge! Professionally engineered plans are needed for systems over 10,000 gallons

ENGINEERED CONTAINMENT SYSTEMS 4 Galvanized steel construction

4 Optional “J Guard” liner

Please call for information and quotes on a custom system for your farm or ranch Containment meets all SPCC requirements

Fisher Metal Products Fort Benton, MT

406-622-5233

Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks

Contain Your Tanks – Contain Your Tanks – Contain Your Tanks – Contain Your Tanks

FUEL STORAGE ~ FUEL CONTAINMENT ~ FUEL SYSTEMS

Dwarf orange tree

By Ron Smith, Horticulturist, NDSU Extension Service Q: I have a healthy dwarf orange tree. The tree flowers and many tiny green buds form. They grow to be a quarter-inch across and then they all fall off. How come? A: It is the lack of sufficient plant fertilization. Get a small oscillating fan or an artist’s paintbrush to dust the pollen onto the pistillate (female) part of the flower to get fertilization accomplished. Being an indoor plant with no air movement or insect activity, pollination doesn’t take place. If that doesn’t make small oranges, then the variety you have was bred as a sterile (nonfruiting) tree. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu.edu.

Afghanistan’s first soy processing plant

A distance of seven thousand miles is just the start of the differences between the Brookville, Ohio farm where Steve Berk grew up raising soybeans as an FFA project and his current residence in Afghanistan. Yet, a new soybean processing factory creates a landmark link between states like Ohio and Afghan reconstruction efforts. Berk is a U.S. Department of Agriculture (USDA) Senior Representative at the U.S. Consulate in Mazar-i-Sharif. He and U.S. Foreign Agricultural Service Agriculture Minister Counselor Quintin Gray joined the American Soybean Association’s (ASA) World Initiative for Soy in Human Health (WISHH) Program at the unique soy processing business this summer. “It’s great to see the Afghan and U.S. partners get this soybean processing facility up and operating,” Gray says. “It will help Afghanistan agriculture continue to develop.” Through USDA’s Food for Progress Program, WISHH and its partners have established Afghanistan’s first commercial soybean value chain as part of the Soybeans in Agricultural Renewal of Afghanistan Initiative (SARAI). As a result, Iowa-made processing equipment from Insta-Pro now has soybeans from Afghanistan as well as Ohio, Michigan and other states flowing through it. An Afghan company provided the land and the building as well as employs the staff. People and livestock will benefit from the high-protein soy flour, soy meal and the crude soybean oil produced at the Mazar-e-Sharif manufacturing facility. An Afghan dairy, Kefayat Farms, made the first purchase of 10 metric tons of soybean meal for its herd of 140 Holstein cows. Farmhands soon noted the cows producing two to three additional liters of milk a day, and the milk quality was noticeably improved so customers were willing to pay more. A solid supply of soybeans is key to the processing plant serving as a reliable source to its customers. Throughout the three-year project, more than 200,000 bushels of U.S. soybeans will augment local production processed in the plant. Perdue Grain and Oilseed’s 2011 sale exemplifies how U.S. soybeans contribute to the processing plant being a steady supplier of soy products in Afghanistan. For example, USDA purchased 1500 metric tons of soybeans for the processing plant’s use from Perdue’s partnership with Commercial Lynks, a Virginia-based trading company. Perdue has more than 70 grain elevators east of the Mississippi River and used Michigan and Ohio soybeans for the USDA purchase. The soybean sale further contributed to the U.S. economy as the shipment loaded at a port facility in Chesapeake, Virginia. According to Perdue Grain and Oilseed Vice President John Cassidy, developing country markets represent a growing demand for U.S. feed ingredients. “WISHH is an important tool to expand markets in the U.S. soybean industry,” says Cassidy, who also appreciates the importance of USDA backing of the financing in countries that have immature banking sectors. In 2011, the project also assisted 891 Afghan farmers, including 91 women, in producing the country’s first commercial crop of soybeans on a total of approximately 450 acres. This year, 3,325 Afghan farmers, including 300 women, are planting soybeans through SARAI. The U.S. Department of State and Department of Defense contributed to this success by assisting ASA’s WISHH with military air transport of the Stine soybean seeds from Illinois to Bagram Airfield, Afghanistan. The shipment was then trucked to farmers in a northern province. In 2011-12, a combined total of approximately 50 metric tons of U.S. soybean seeds went to Afghanistan for farmers to plant. In addition to generating income for subsistence farmers who typically have less than an acre of land, the soybeans are priming the growth of oilseed demand in the country. Currently, Afghanistan imports more than 90 percent of its cooking oil. Much of that is palm oil. Afghanistan’s poultry and livestock industries also look to expand with quality meal from oilseed crops, such as soybeans. Since being founded by U.S. soybean farmers in 2000, WISHH has worked in 24 countries to improve diets, as well as encouraged growth of food industries. The WISHH program is managed from ASA’s world headquarters in St. Louis. For more information, visit www.wishh.org. ##### The faces of George Washington, Thomas Jefferson, Theodore Roosevelt, and Abraham Lincoln are sculpted into Mount Rushmore, in South Dakota, the world’s greatest mountain carving.

Trader’s Dispatch, October 2012 — Page C25

TILT TOP TRAILER FOR SALE

1977 Miller 12-ton tilt top trailer, 19-ft. long, 8-ft. wide, pintle hitch, 16” Budd wheels, electric brakes, good shape............................................................ $3500 Phone 406-590-3279, Choteau, Montana

GRAIN TRAILER, COMBINE & DROP DECKS FOR SALE

2010 Jet 42-ft. hopper bottom grain trailer. 2010 John Deere 9770 combine with 36-ft. header. (with approved credit). 2008 and 2009 drop deck, spread axle trailers with air ride. Phone Paul Burney, 406-734-5310 or 899-9861 cell

Hydraulic Breaker Post Drivers For Sale

• Skid loader mount • Low profile • Quick and easy on and off • Full control of post while driving • Very low maintanence • 8” diameter domed cup • 3 sizes available ~ 500-, 750-, 1000-ft. lb.

Montana Post Driver

(406) 239-4824, Gold Creek, MT

TRANSPORT EQUIPMENT SPOKANE, WA 1-800-366-4497 Jeff Cell: 509-714-8232

MISSOULA, MT 1-800-356-3547

Brad Cell: 406-239-8188 - Dyhlan 406-274-2993

6 available 2

2008 Volvo VNL64T730’s hard to find mid roof with Cummins power ISX, 13 speed transmissions, 3.42 rear ratio, lo-pro 22.5 tires on all aluminum wheels. Low to mid 400,000 miles, 2008 Mack CX MP8 485 hp, Eaton 13 speed, workstations, fridges, O/O spec....................... Eaton 40,000# rears, 3.55 ratio, 11R22.5 tires ............................. Call For Complete Details on aluminum wheels. Only 530,000 miles. Very nice truck.............................................$52,500

LOCKERS

2009 Peterbilt 387 Cummins ISX 600 hp, 18 speed transmission, Eaton D40-170P rears, 3.73 ratio, dual lockers, In-Dash navigation, leather seats, polished aluminum Herd bumper, 387,000 miles. Excellent truck.

DUAL LOCKING REARS

2006 Freightliner Columbia Cat C15, 475 hp, 18 speed transmission, 42” flattop sleeper, aluminum moose bumper, 11R24.5 tires on all aluminum wheels..................Call For Details

$29,500

2 available

2005 International 9400i Cummins ISX, 10 speed transmission, Lo-Pro 22.5 tires on all aluminum wheels, APU, 673,000 miles.

2-2004 Utilimaster Aeromaster delivery vans. E350 chassis, 5.4 liter gas motors, automatic transmission, 11-ft. bodies and single drive tires. All low miles. Single drive units starting at..............$18,500

View More Trucks and Equipment at www.transportequip.com

Trader’s Dispatch, October 2012 — Page C26

GRAIN VAC WANTED Any Size.

Phone (406) 799-7994, Fort Shaw, MT

(406) 453-1425 FAX: (406) 452-7516

COMMERCIAL • RESIDENTIAL • FARM

OVER DOOR CO.

2624 16th Street N.E. / Black Eagle, MT 59414 P.O. Box 100 Black Eagle, MT 59414

WAYNE PETRINI

M & W MACHINE 3 CNC Lathe Work with 81/2" spindle bore ✓ Irrigation Pump Repair ✓ Heavy Duty Industrial Machining and Repair ✓ Portable Line Boring ✓ Welding ✓ Large Lathe and Mill Work ✓ Heavy Duty Diesel Engine Machine Work

Largest Capacity CNC Cylinder Boring & Line Boring within 500 mile radius

1-855-285-0179 or 406-285-0179 Mark Oelke – Owner 20 W. Cedar • PO Box 788 • Three Forks, MT 59752 Visit us on the web at: www.mwmachine.net

Prevention best advice for protection from mosquitoes, West Nile virus

While the summer’s widespread and severe drought negatively affected agriculture production in many areas, it does not appear to have significantly affected the mosquito population, with this year on track to have the highest number of West Nile cases since the virus was first detected in the U.S. in 1999. Mosquitoes act as the vector carrying the West Nile virus from avian reservoirs to other mammals, particularly humans and horses. More than 1,500 cases of West Nile have been reported to the Centers for Disease Control and Prevention (http://www.cdc.gov/features/ StopMosquitoes), with 65 deaths. While the worst of the outbreak has been in Texas, Kansans have not escaped unscathed by the virus, with 19 reported cases and one death as of August 28. “The chances are real,” said Ludek Zurek, entomologist with K-State Research and Extension. He said about 80 percent of people who contract West Nile exhibit no symptoms and simply develop long-lasting immunity as a result of exposure. Many of these cases are unreported. The other 20 percent experience flu-like symptoms and may not be diagnosed with the virus. According to the CDC, only one in 150 positive cases will develop into the neuroinvasive form of the virus that can lead to paralysis and death. For Zurek, even that small chance is enough to warrant active preventive measures. “When I see my daughters being bitten by mosquitoes, I don’t like it - no matter how low

the chances are that you get it,” he said. “As long as there is a chance, it’s better to prevent being bitten by mosquitoes.” Since human vaccines against West Nile are still being developed, the best way to prevent contracting the virus is to avoid mosquito bites. Zurek recommended wearing long sleeves and pants, as well as a DEET-based insect repellant, especially at dawn and dusk or in areas where mosquito populations are high. “Usually about 30 percent DEET concentration is plenty,” Zurek said. “Higher concentrations don’t offer better protection. Read the label to see how often to reapply.” People can also reduce the mosquito population by eliminating standing water around their home and property. Smaller containers of water, such as pet dishes or birdbaths, should be dumped once a week, Zurek said. Placing a few goldfish in water containers for livestock or horses prevents mosquitoes from breeding. The end of the summer is typically the peak for human West Nile cases. Zurek urged people to be aware and take necessary precautionary measures. While West Nile usually affects people age 50 and older, or people with weakened immune systems, it has been known to affect people of all ages. “Just because you are young does not mean you are 100 percent bullet proof from West Nile,” he said. “It is true that older people are more susceptible to it. But people from any age category have died from it. So it’s best to be on the safe side, be aware of the risk and lower it to minimum.”

FALL DISCOUNTS up to 15% – Call for Details

ays

ack s

oreb

S Dusty

Manu fa Rock ctured in Valley , IA

New Powder Coated, Bolt Together Kits Now Available

NEW TUNNEL AERATION ling

All Sizes All Custom Built Kits Weld Together Prefabs = 2 pieces

New easy to build kits. Your choice all weld together or all bolt together.

hove

ore s

No m

M-K Hoppers

New Powder Coated, Bolt Together Kits with FREE DELIVERY

MK HOPPER BOTTOM CONES Just open the chute and watch the advantages work for you.

le ilab Ava it form in k easy for ping p shi

✔ 20 bushels to 60,000 bushels ✔ Any size 4’ - 42’ diameter. ✔ Seed or feed storage bin. ✔ Extra capacity. ✔ Drying bin for high moisture grain. Dusty Soreback says: ✔ Quick/easy access to grain. ✔ No more breathing harmful dust. “Check out a few of the ✔ No more dangerous augers in bins. many uses & advantages” ✔ No more shoveling.

Call for all your grain storage and handling needs including: flat bottom grain bins, hopper bins, hopper cones and miscellaneous accessories.

MK INDUSTRIES

1-877-877-1455 Manufactured in Rock Valley, IA

Conrad, MT http://www.hoppercone.com

Soil pH

By Ron Smith, Horticulturist, NDSU Extension Service Q: My question involves a soil sample test report that I got from NDSU last winter. It tells me not to modify my soil other than to add a bit of nitrogen. However, the soil pH is 7.7. Everything I thought I knew about soil pH suggests that number is too high. I am used to working with pH levels in the 5.5 to 6.5 range. I hate to mess with success, but I want to improve on that success if I can. I raised a tomato last summer that was 1l pounds 15 ounces. Should I mess with changing the pH? A: A pH of 7.7 is high but not out of the range of being able to grow crops such as you have so ably demonstrated with growing a near bowling ball-sized tomato. A pH above 7 is fairly standard for most of the state, so we’ve gotten used to seeing readings that high or higher. A pH lever higher than the middle 8s would start to beg the question of what can be grown at that level without a major soil modification. Leave everything well enough alone and you’ll be able to enjoy a crop of tomatoes like you did last year. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu.edu.

Watch your tires!

By Carl Dahlen, NDSU Beef Cattle Extension Specialist Inverted tires can make great structures to hold cattle feed and water, but regular maintenance is required. If the tires you are using on your operation have wire in the walls, this wire can break off and subsequently be consumed by cattle. Cattle ingesting these pieces of wire can develop a condition known as hardware disease. Once wire is swallowed, it goes into the digestive system and often gets trapped in the chamber of the stomach called the reticulum. The reticulum is the chamber that has honeycomb-shaped structures on the walls and functions to trap foreign materials. If the wire punctures the reticulum wall, digesta and other stomach contents can leak through the wall and cause a condition called peritonitis. Peritonitis can lead to general unthriftiness and also may cause systemic infections. Both of these conditions may be observed, and cattle with a continually declining health status eventually may need to be culled. Metal, wire and other foreign materials in the reticulum also can lead to sudden death. The diaphragm is the thin muscle that divides the abdominal cavity (which contains the stomach, intestine, liver, etc.) from the thoracic cavity (which contains the heart and lungs). The anatomy of cattle is such that the reticulum and the heart are close to each other, separated only by the diaphragm. In instances when cattle experience severe abdominal contractions (for example, while delivering a calf), foreign material in the reticulum can be forced through the reticulum wall and into the heart. If this happens, the animal will die shortly thereafter. Alternatively, the metal may pierce only the protective layers around the heart and cause inflammation and/or infection. Either way, it is not a good situation! To attempt to avoid hardware disease, perform regular maintenance on your tire feeders. Cut or grind off exposed wire and make sure to pick up pieces and remove them from the cattle-feeding area. This also highlights the importance of cleaning any wire, nails or other metal scraps from areas to which cattle have access and including powerful magnets in feed mixers to prevent hardware disease in your cattle.

Business plan doesn’t need to be long, just convincing

Many people thinking about owning a business or starting a business of their own say getting a business plan written is their most daunting task. But according to Chrystal Irons, a business development specialist with University of Missouri Extension, a business plan doesn’t have to be long; it should be simple and direct. “A business plan needs to encompass the vital sections to effectively tell your business idea and story in a convincing fashion,” said Irons. One way to do that is to add an appendix, show publication clips, pictures, graphs, drawings, principals’ resumes, letters of intent from prospective customers, job descriptions, tax returns, contracts, licenses, leases, client testimonies, personal financial statements, credit reports, letters of reference and other such documents that lend credibility to your product or service. The organization of a business plan is also important according to Irons. “You will need a cover sheet and a one-page executive summary that captures the reader’s attention and serves as a summary for the plan,” said Irons. According to Irons, accuracy is critical and there are several other sections that every good business plan needs. First, a basic description of the business, including an explanation of the business concept, a history of the business, if any, a list of growth possibilities and an explanation of why it will be a success. The marketing plan is another key element of the plan. “The marketing plan should include potential customers and how you plan to attract and hold them, features and benefits of your product/service, pricing strategy, your sales promotion plan and potential, distribution methods, purchasing plan, and don’t forget to address competition,” said Irons. Other important elements include information describing how the business will be managed, the organizational roles, and personnel needs. The plan must include financial information such as needs, revenue and cost projections as well as a break-even analysis. “The sections will vary depending upon the readership and type of business. Use those that are relevant to your business and your readers,” said Irons.

Trader’s Dispatch, October 2012 — Page C27

COMBINE & HEADER FOR SALE

2005 Case IH 2388 combine, AFX rotor, large grain tank extension, 1538 engine hours, 1151 rotor hours.............................................................................................................. $130,000 2007 HoneyBee SP 36-ft. draper header, U2 pickup reel............................................ $30,000 Phone Doug Greytak, (406) 394-2381 or 394-2311 or cell 262-4962, Havre, MT

SPECIALTY TOOL & ATTACHMENT Providing Quality Equipment to Increase Productivity Providing * Fence Equipment Supplier * * * Your Fence Equipment Supplier

T-Post/Pipe Drivers Drivers T-Post/Pipe

Ask about about the new Ask loader/ quick loader/ attach post driver with optional optional post with grapple & side tilt. grapple

New… New… Gas Gas Powered Powered Post Post Driver Driver A A lightweight, lightweight, 32 32 lbs, lbs, compact compact post post driver driver with with the the reliability reliability of of the the Honda Honda GX-35. GX-35.

New and and Used New Over 100 100 tractor tractor and and skidsteer skidsteer Over Skidsteers & Skidsteers attachments available. available. Excavators attachments sta@tctwest.net Mention Mention this this ad ad to to receive receive 5% 5% Off Off In-Stock In-Stock Items Items thru thru Oct Oct 18! 18!

(888)754-7909

CODY, WY - We Deliver

Dirt, Bullet Rock, DP, and Wobble Augers. www.sta-attachments.com

(307)754-7909

YOUR GRASS SEED SOURCE

Big Sky Wholesale Seeds, Inc. Box 852, Shelby, MT 59474 Phone 434-5011 Phone 434-5600 FAX 406-434-5014 E-mail: bigskyseeds@3rivers.net Web site: www.bigskyseeds.com

Native Dryland Items Mountain Brome Idaho Fescue Rough Fescue Sherman Big Bluegrass Sandberg Bluegrass Prairie Junegrass Basin Wildrye Streambank Wheatgrass Thickspike Wheatgrass Western Wheatgrass Bluebunch Wheatgrass Slender Wheatgrass Blue Grama Green Needlegrass Indian Ricegrass

du p n u o e R alf a v a lf H Legumes We ad y A i l a ble Alfalfa R e d av a Sainfoin Se e Alsike Clover Red Clover Yellow Blossom Sweet Clover Cicer Milkvetch Birdsfoot Treefoil Black Medic

Tame Dryland Items Smooth Brome

Meadow Brome Put our Sheep Fescue Fescue “over three Hard Paiute Orchardgrass decades of Russian Wildrye Dahurian Wildrye experience in Altai Wildrye Tall Wheatgrass Intermediate Wheatgrass the grass Pubescent Wheatgrass seed & Newhy R/S Wheatgrass Crested Wheatgrass legume Hycrest Crested Wheatgrass business” Wetland Native Items Nuttal Alkaligrass to work on Alkali Bulrush Tufted Hairgrass your farm Tame Wetland Items or ranch Reed Canarygrass Garrison Creeping Foxtail Timothy

Visit our website

www.bigskyseeds.net

Trader’s Dispatch, October 2012 — Page C28

HAY FOR SALE - CHINOOK Alfalfa grass, hay barley/straight alfalfa. ALL LARGE ROUND BALES, NO RAIN. Phone (406) 357-2768 evenings, or 357-3222 days

##### Ben and Jerry’s send the waste from making ice cream to local pig farmers to use as feed. Pigs love the stuff, except for one favor: Mint Oreo.

An update on MAG-60

By Dr. Les Anderson, Beef Extension Specialist, University of Kentucky To enhance the value of our feeder calves, University of Kentucky (UK), KBN, and the Agricultural Development Board has launched the MAG (Management And Genetics) - 60 (60-day postweaning) program. In this program, KBN partnered with beef producers to synchronize estrus in their beef females for timed insemination. Producers inseminated their females to a small, select group of sires that were proven in their ability to sire productive, profitable calves. The ultimate goal was to increase the market value of this set of feeder calves by enhancing their genetic ability to excel in the feedlot and on the rail. The first sets of calves from the MAG-60 program are hitting the ground in September. Last fall, 2,674 females were bred to one of 20 sires. Last spring, over 4,972 females were bred in the MAG-60 program. Steers sired by AI will be managed according to CPH health requirements and will be backgrounded for a minimum of 60 days postweaning. The calves will be age and source verified, thus, we will be marketing feeder steers that are age, source, and genetically verified for superior performance. Feeders produced in this program will be co-mingled by our marketing agents and marketed either in CPH-like feeder calf sales, video sales, or directly to feedlots. Our current plans are to video and weigh the calves on each farm by the end of April 2013. A MAG-60 video auction will then be conducted in May or June of 2013. Calves will then be delivered to collection points for transportation to the feedyard. Although some producers will likely chose to retain ownership, we feel that most of the MAG-60 calves will be sold in the video auction. This fall marks the final breeding season for MAG-60. We are currently looking for producer’s interested in participating in MAG-60. Bulls that will be used for AI this fall include: from Select Sires, GAR Predestined (AN), Counterpart (AN), Free Lunch (CH), Durango (HE), and Rookie (SM); from ABS, New Standard (AN), Foresight (AN), Gridmaker (CH), Ribeye, (HE), and Combination (SM); from Accelerated Genetics, Fast Track (AN), Total Impact (AN), Platinum (CH), On Target (HE), and Manifest (SM); and from Genetic Horizons Right Answer (AN), Tokach Update (AN), Bluegrass (CH), Revolution (HE), Dew Time (SM). For more information regarding the MAG-60 program, contact Mr. Land Dale or Mrs. Becky Thompson at KCA (859-278-0899) or Dr. Les Anderson at 859-257-2856.

Hormone therapy for fruit flies means better pest control

October Specials New 2011 PJ 22-ft. x 6” channel custom lawn care trailer, 2-7000# torsion axles, 2-ft. dovetail, 5-ft. slidein ramps, rubrail, 4-ft. welded sides. One only...............................$3995 2003 Newmar Mountain Aire New 2012 PJ 20-ft. x 5” channel RLPK 38-ft., 4 slides, tandem car hauler, 2-3500# axles, electric dually, heated tanks, new tires, brakes, spring suspension, 2-ft. new propane tanks, new batdovetail, 5-ft. slide-in ramps............ tery, air conditioning.................. ..............................................$2995 ..............................$39,500 obo While they last

By Jan Suszkiw, Agricultural Research Service Released en masse, sterile Mexican fruit flies can undermine a wild population of the fruit-damaging pests so that fewer applications of insecticide are needed. But the irradiation used to sterilize the flies weakens them, hindering their ability to outcompete wild-type males for female mates. Now, U.S. Department of Agriculture (USDA) and collaborating scientists have devised a hormone therapy for making sterile flies “more macho,” improving their chances of mating with female flies before their wild rivals do. Peter Teal, a chemist with USDA’s Agricultural Research Service (ARS) in Gainesville, Florida, developed the hormone treatment in conjunction with a team of scientists from Mexico, Argentina and Austria. Anastrepha ludens (Loew), the Mexican fruit fly, is a significant quarantine pest that could inflict billions of dollars in losses to citrus, peach, pears, avocado and other crops if it moved from Mexico into the United States. Fortunately, Mexico operates a sterile-insect release program to control the green-eyed, one-centimeter-long pests, whose larval stage feeds inside host fruit. The program involves sterilizing male fruit flies with irradiation and releasing them into nature to mate with the wild female fruit flies. These matings produce eggs that don’t hatch. Eventually, the population collapses, explains Teal, who leads the ARS Chemistry Research Unit in Gainesville. The team’s treatment uses a hormone analog called methoprene to speed the rate at which sterile male flies reach sexual maturity while kept in specialized holding facilities. In studies, methoprene-treated flies were ready for release four days sooner than non-treated flies. And thanks to a dietary supplement of hydrolyzed protein, the sterile flies, once released, were also stronger and more successful at competing for mates.

##### It was a high counsel that I once heard given to a young person, “Always do what you are afraid to do. -- Ralph Waldo Emerson

Trader’s Dispatch, October 2012 — Page C29

MISCELLANEOUS FOR SALE

Hyline 6600 round bale feeder, 1000 PTO............... $5500 10-12 pack hay bale mover, single cylinder.............. $2500 Phone (406) 360-5459, Stevensville, MT

LOST VALLEY FENCING Champion Ewe at the Columbia Show and Sale went to Tom Key’s ewe of Mt. Aeries Columbia from Great Falls. (left). The reserve champion ewe went to Doug Hitch’s ewe of Hobson. It is shown in the photo by Raina Blackman. (right) Photo courtesy of Kathy Hochstrat.

MT Columbia Sheep Association Show and Sale

The Montana Columbia Sheep Association held their annual Show & Sale in Lewistown, Montna on August 25th. Wendy McKamey was the Judge. Grand Champion Ram went to Hochstrat Columbias of White Sulphur Springs with a yearling ram. Reserve Champion Ram went to Blackman Columbias of Wolf Creek, also with a yearling ram Champion Ewe went to Mt. Aerie’s of Great Falls with a ewe lamb. Reserve Champion Ewe went to Hitch Columbias of Hobson with a ewe lamb. In the Junior Show 1st Yearling Ram went to Logan Pierce of Harlowton. 1st Ram Lamb also went to Logan Pierce. 1st Yearling Ewe went to Meagan Miller of Manhattan and 1st Ewe Lamb went to Brooke Kern of Absarokee. In the Wool Show the 1st Ram Fleece went to Timber Coulee Columbias of Sunburst. 1st Ewe Fleece went to Prairie Island Columbias of Sun River. Sale averages were Yearling Ewes $290; Ewe Lambs $250; Commercial Ewe Lambs $188; Yearling Rams $433; Ram Lambs $356; and Range Rams $311. There were no applications for the Starter Flock so none was awarded.

For All Your Fencing Needs

• Barbed Wire • Game Fence • Rail Fence • Mountain Fence • Corrals, wood/steel • Windbreaks • Repairs • Page Wire • Entry Way Experienced – Dependable – References We have equipment for rocky ground and rough terrain – No job to big or small –

Tom – Free Estimates

406-403-8749 Will Travel

Competitive Prices Fairfield, MT

Licensed and Insured

101 Sunfield Drive

Belgrade, MT

406-388-3259 Steve Swan

Steve’s cell - 406-580-2937 11/2 -miles west of Belgrade on Frontage Road

LOADERS & CRAWLERS Heavy Equipment Sales • Truck and Trailer Sales Cargo Container Sales and Rentals

2005 Cat D6N XL 6 way blade, EROPS, ripper, 50% undercarriage, air conditioning. ...............................$95,000

Check Us Out On The WEB: www.mountainequipment.net

MISCELLANEOUS

OCEAN CONTAINERS Excavators 1980 Case W18 wheel loader with cab, heat, good 17.5x25 tires and 2.5 GP bucket.................................$16,500

Champion Ram at the Columbia Show and Sale went to Kathy Hochstrat’s ram from White Sulphur Spring (left). Reserve champion went to this ram of Raina Blackman’s from Wolf Creek. (right). Photo courtesy of Kathy Hochstrat.

Too much or too little water By Ron Smith, Horticulturist, NDSU Extension Service Q: I purchased a tree this spring that seems to be getting new and larger leaves. However, some of the leaves are turning yellow and have brown edges. I also have noticed that the main trunk at the top where it had been cut from the nursery has turned a darker color on one side and seems to be dried out when I scrape the bark. I can’t tell if I’m over or underwatering the tree. A: The problem could be due to overwatering, being planted too deeply or both. I don’t understand why the nursery where you purchased the tree thought it necessary to cut the top of the tree. This practice is discouraged because it removes valuable foliage needed to assist the tree in getting established. If it needs to be cut back, it can be done after becoming established in the landscape for a year or two. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald. smith@ndsu.edu. For answers to general horticultural questions, go to http://www.ag.ndsu.edu/horticulture.

2006 Ingersoll-Rand SD45 54” smooth drum roller, Cummins engine, 800 hours. Nice condition..........$29,500 2001 Cat CP-563D 84” sheeps foot roller, 3600 hours, excellent.....$51,500 1999 Sky Trak 3606 telescoping forklift with open ROPS and Cummins diesel..................................$18,500

2002 Kobelco 200SR LC hydraulic excavator with good undercarriage, hydraulic thumb, clean and tight. 5007 hours..........................$48,500 2007 Yanmar VIO45 mini excavator, hydraulic thumb, open ROPS, excellent rubber tracks, 1995 hours...$26,000

1997 Komatsu D39E crawler with cab, heat, ripper, 60% undercarriage, 6 way blade............................$21,500

2004 Cat 322CL long reach excavator. 5100 hours. Excellent.......$125,000 Cat 12F motorgrader, heat, electric start. Tight & clean, runs great....$14,900 Vermeer 605F round baler with good belts. Twine.............................$2200

TRAILERS

TRADES CONSIDERED TRUCKS

1981 International single axle dump truck with gas engine, 5+2 speed and 5 yard box.......................$6500

1998 Case 850GLT crawler with 6 way blade, ripper and OROPS. 4100 hours...................................$35,000

BACKHOE

1993 Pioneer Max 50 4 axle end dump pup trailer, liftable front axle, good box......................................$13,900

TRACTORS

John Deere 4640 2WD with cab, 3-point and 1000 PTO..................... $18,500 1975 John Deere 8430 tractor, Sound Guard cab, good single tires, PTO.... ............................................ $12,500

2001 Chevrolet 1/2 ton 4x4 Extended Cab with automatic................$5800

Financing Available oac

2006 John Deere 310G 4x4 backhoe with cab, A/C, extend-a-hoe and 2100 hours..........................$42,000

Trader’s Dispatch, October 2012 — Page C30

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

1ST CUTTING HAY FOR SALE 250 ton of 1st cutting alfalfa, 4x4x8 bales Call (406) 278-3569

STEP DECK FOR SALE 1966 Fruehauf 45-ft. x 8-ft. step deck flatbed trailer, tandem axle, tires and brakes 60%+. Excellent trailer for its age, solid built. Would make an excellent sprayer or hay trailer.....................................

$8500

Phone 406-279-3256, leave message

Balewagons & Retrievers

New Holland 1095, self-propelled....................................... CALL New Holland 1089 diesel, new tires, clean......................$89,000 New Holland 1079 diesel, extra sharp.............................$75,000 New Holland 1069 gas, rebuilt, sharp, clean....................... CALL New Holland 1069 balewagon, diesel engine..................$49,500 New Holland 1068 gas.....................................................$34,000 New Holland 1063 pull-type, 160 bale capacity.................. CALL New Holland Super 1049 self-propelled balewagon........$28,000 4-New Holland Super 1049 balewagons...... $12,000 to $28,000 2-New Holland 1037 balewagons................. $18,000 to $20,000 New Holland 1033 balewagons........................................... CALL New Holland 1032...............................................................$8500 New Holland 1002 pull type................................................$3000 New Holland 1052 retriever bed.......................................... CALL

Haying Equipment

Case IH 8545 (same as Hesston 4590) inline square baler. Very Sharp............................................................................$14,500 New Holland 1495 haybine, gas, hydro..............................$8500

Consignments

New Holland 276 baler............................................... Make Offer New Holland 1051 retriever on 1974 GMC truck....... Make Offer New Holland Super 1048 balewagon................................. CALL Massey Ferguson 12-ft. disc with new blades, nice...........$3500 Massey Ferguson 238 7-ft. sickle mower...........................$1500 John Deere 750 15-ft. no-till drill......................................$15,000 International 10-ft. end wheel drill, GSA 6” , single disc............... . .............................................................................. Make Offer International 4 bottom trail plow, trip beam................ Make Offer John Deere 3 bottom trail plow................................... Make Offer Graham Hoeme 10-ft. chisel plow.............................. Make Offer 2000 Western Star dump truck, Cat 425 engine, 10 speed transmission, 44,000 lb. locking rear ends, 15-ft. Workman box, 50,000 miles on new engine overhaul..........................$34,000 1973 Ford pickup with slide in sprayer, 40-ft. boom............$1500 30-ft. grain auger with motor..................................................$300

Industrial Equipment

Hough H65 rubber tired front end loader..........................$18,500 JCB 508-40 telehandler, cab, air, heat, 40-ft. reach, 8000# lift...... . ....................................................................................$27,500 Kobelco mini-excavator with blade and thumb.................$18,500

Used and New parts available for ALL models of New Holland balewagons

Sod Buster Sales Inc. Farm Equipment Finding Service 505 Gingras Springs Rd, Polson, MT 59860

406-883-2118 or 1-877-735-2108

Winter cereals an alternative silage source

By NDSU Extension Service Cool-season cereal grains could provide near maximum forage yield.” livestock producers with another source of Fertilizer N (nitrogen) applications feed if dry conditions persist and the subsoil should be split, with 30 to 40 pounds of moisture continues to be depleted. N per acre applied in the fall and the re“Dry conditions across parts of the upper mainder top-dressed in early spring. Using Midwest strained crop production during a starter fertilizer such as MAP or DAP in the 2012 growing season,” North Dakota combination with some potash in the fall State University (NDSU) Extension Service will provide the crop with the nutrients it beef specialist Carl Dahlen says. “In many needs to get established well and maximize areas, late-season crops such as corn and winter hardiness. Limit the amount of insoybeans took the brunt of this reduction in furrow fertilizer to 20 to 30 pounds of N yield. However, cool-season cereal grains and K2O (potassium oxide) combined to fared much better than their warm-season reduce seedling damage. counterparts.” For help in determining the proper fertilTo take advantage of fall, winter and izer application rate for your fields or with spring precipitation, producers should soil testing, contact your local Extension plant winter wheat, winter triticale or fall personnel or a qualified crop consultant. rye this fall for chopping and ensiling in The primary weed problems in winter 2013. These cereal grains likely would be cereals are annual weeds such as biennial ready to cut by the beginning of June 2013, wormwood, field pennycress and shepwhich would help producers meet at least a herd’s purse, and perennial weeds such as portion of their feed needs for the 2013 fall Canada thistle, quackgrass and perennial and winter feeding seasons, Dahlen adds. sow thistle. Use a fall burn-down applicaThe optimum time for seeding winter tion of herbicide prior to planting to control cereals in Minnesota and North Dakota emerged winter annual weeds, volunteer is September 10-30 south of Interstate 94 crops and perennial weeds. and September 1-15 north of the interstate. Consider most winter wheat varieties Delaying planting past the optimum seeding to be susceptible to diseases such as tan date increases the risk for winterkill. Howspot, powdery mildew, and leaf and stripe ever, seeding too early can result in excesrusts. Fall rye and triticale generally are sive growth in the fall, making plants more less susceptible to these fungal pathogens. vulnerable to winterkill and exposing the Wiersma advises using half the labeled rate seedlings to a number of diseases and pests. of a fungicide in early May to control any The wheat streak mosaic virus (WSMV), of these fungal pathogens because they for example, has become an increasing will reduce total biomass and feed quality, problem in western North Dakota in reespecially if you no-till seed into wheat or cent years. The best way to avoid WSMV barley stubble. Check the product label for infections in the fall is to break the green preharvest interval restrictions prior to apbridge by destroying all of the volunteer plication. wheat at least two weeks before planting When harvesting, expect the total drywinter wheat and delaying planting. For matter production of the winter cereals to more information on the risks of the WSMV equal or exceed that of spring wheat and across western North Dakota, contact the spring triticale. Extension area cropping system specialists Cutting the winter cereals for silage at at NDSU’s Research Extension Centers near the boot stage allows for double cropping because the crop will reach the boot stage by Dickinson and Minot. the last week of May or first week of June Fall rye is the most winter-hardy, foland the milk stage two to three weeks later. lowed by winter wheat and winter triticale, After removing the cereal crops, consider according to Jochum Wiersma, University planting mixes of cover crops for late-seaof Minnesota small-grains specialist and an son grazing or other crops such as sorghum, adjunct professor in NDSU’s Plant Sciences sudan grass or sorghum-sudan grass. Department. The more winter-hardy the Winter cereals harvested at the boot stage variety, the more latitude you have to delay have a moisture content of about 80 percent the planting past the optimum planting date. and will have to be wilted to get them down He recommends no-till seeding winter to the target moisture of 60 to 65 percent. cereals into standing crop stubble to retain Small grains have hollow stems and are snow during the winter. Snow insulates, more difficult to pack than corn silage, so protecting the crown of the winter wheat they should be cut finer (3/8 to 1/2 inch). from the potentially lethal winter temperaDelaying the harvest until the late dough tures. No-till seeding also preserves the little stages of growth increases the chances of moisture left in the soil. poor ensiling because packing the silage Winter cereals should be seeded 1 to 1 1/2 becomes more difficult. The potential beninches deep to encourage rapid emergence. efits of using inoculants to optimize silage Seeding shallower than 1 inch will create a fermentation are greater with small-grain sihigher winterkill risk. lages than for corn silage because microbial The optimum stand of winter cereals is populations often are low at the time when 900,000 to 1 million plants per acre, or 21 cereal grain silages would be harvested. to 23 plants per square foot. This would be equivalent to roughly 90 to 100 pounds of seed per acre. Producers should increase the stand to 23 to 25 plants per square foot if delaying planting or the seedbed is very dry or lumpy, making good seed-to-soil contact difficult to achieve. “Some winterkill always should be expected,” Wiersma says. “In the spring, do not be too quick to destroy stands that appear to have experienced winterkill. Wait until the plants break dormancy and fields begin to green up in the spring. You may have to wait until the end of April before you can determine the degree of winterkill. Evaluate fields and determine whether stands have at least 17 plants per square foot. If so, these stands still can produce

Dry soil may cause building problems

By NDSU Extension Service The drought not only affects crops and plants. It also may be causing problems for your home. “Sticking doors or windows and cracks in walls or ceilings may be indications that the building is shifting due to soil shrinkage,” says Ken Hellevang, North Dakota State University (NDSU) Extension Service agricultural engineer. As clay or other fine-particle soils dry, they shrink, creating gaps around the basement wall. This space exposes more of the soil to airflow, which increases the amount of moisture removal. A gap along the wall, through time, may allow airflow that will dry the soil under the foundation. The foundation’s support is removed as the soil shrinks, which may stress the concrete enough to cause a crack to form. This also will occur around concrete slabs if the support base is clay or other fine-particle soil that swells and shrinks with changes in moisture content, according to Hellevang. The gap between the soil and basement wall also allows water from rain to run down the wall and may result in basement water intrusion. To minimize these problems, Hellevang recommends maintaining a relatively constant moisture content in the soil around the house. Water the soil evenly around the entire foundation during extended dry periods if the soil is pulling away from the basement wall. “Do not apply water directly into the gap because this may cause water intrusion into the basement,” he says. “Instead, apply water 1 to 2 feet away from the foundation edge. A soaker-type hose permits applying water to the soil without getting it on the house wall. Apply the water slowly with rest periods of several hours to permit the water to gradually soak into the soil to a depth of several feet.” Sometimes people place plastic under rock next to the house as part of landscaping or to minimize water infiltration next to the house. This will prevent you from applying water next to the house. However, water added to the soil even 3 feet from the wall will migrate through the soil profile and wet the soil near the basement wall. It likely will not migrate enough to close the crack or gap near the surface, but it will wet the soil at greater depths and minimize the potential for soil shrinkage that may affect the structure. “Do not fill the crack next to the basement wall with soil,” Hellevang says. “When the soil gets wet, it will expand, pushing on the basement wall, possibly with enough pressure to crack the wall.” Even if cracks have appeared in walls or doors are sticking, you should apply water now to keep the soil from drying further and to rewet the soil to a normal level. Because keeping the soil at a relatively constant moisture content is the goal, having a drainage system to remove excess moisture also is important. This includes making sure you have drainage pipe that’s encased in granular material along the footing and a drainage plane along the exterior of the basement wall. You generally can use the size of the cracks in the basement walls to determine if you need to hire a contractor to repair the foundation or basement. Hellevang suggests you also look for changes in alignment by sighting along the length of the wall to see if it is straight. Alignment problems are more common with soil expansion, but they also can occur when the wall is not supported laterally due to the soil shrinking away from the basement. The amount of distortion in alignment can be used to determine the need for a contractor. Cracks in the basement wall should be repaired to reduce the potential for water intrusion. You should wait to repair cracks in other walls and ceilings until the soil moisture returns to normal. “Remember that if the crack occurred due to soil shrinkage, the soil will expand when it gets wet,” Hellevang says. Problems with doors and windows binding may correct themselves when the soil expands as it gets wet. ##### Living two blocks from my grandfather allowed me to pick up many of his Grampa Pete’s expressions and sayings that I now use on my own kids. “Many summer afternoons found my Grandpa and me alone on the golf course when the rest of the town was at work.” “I got a lot of instruction about golf and life. Our outings usually started with Grampa Pete asking if I wanted to play some ‘cow pasture pool.’ As we walked around the course, I would usually be the first one to complain about how tired I was carrying our clubs.” Keeping a few steps ahead of his grandson, Grampa Pete would always answer, “If you’re tired of walking, you could always run a ways.”

Trader’s Dispatch, October 2012 — Page C31

TRUCK WITH MIXER FOR SALE

1999 International 2-ton truck with 2000 490-14 rotor mixer, automatic, diesel with 466 DT engine, in excellent condition and is ready to go to work. Phone Rick Kimbell, (406) 250-2094 or (406) 257-5057, Kalispell, Montana

$37,500 obo

Dividend Extreme

Phone 406-378-2112 – After hours: Roger Terry 406-378-3220

Winter Wheat Seed We treat with Dividend Extreme, Cruiser, Proceed,and Cruiser Max Cereal

• Hawken (new high yielder) • Genou (solid stem) • Decade • Judee • Bearpaw • Quake • Montana State Yellowstone • Others available Even if we don’t have it listed - WE CAN GET IT!

Willow Creek

Beardless Forage Winter Wheat up to 5-tons/acre, irrigated Call Roger or Jason for details

LOOKING TO BUY

Feed barley – Feed Oats – Feed Corn

Custom

feeds

Your grain or ours

All forage feeds available with vegetable oil

• Snowy Mountain & Cargill mineral & salt

Pre-Order Your Cake For Fall 406-378-2112 Big Sandy, MT After hours: Roger Terry 406-378-3220

Trader’s Dispatch, October 2012 — Page C32

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

BeefTalk: May you find all your ear tags

By Kris Ringwall, Beef Specialist, NDSU Extension Service longer are big news items, the desire and As fall markets prepare to receive the the need to know where cattle come from current calf crop as it comes off the cow, HOE DRILLS FOR SALE and, in many cases, how old the cattle are, producers initiate late summer and fall 1997 John Deere 9400 30-ft. hoe drills, 10” spacing, still is active. roundups in what becomes an annual, wellfertilizer, grain, AcraPlants, transports. Each program, in its own right, is efplanned exercise that repeats every year. Good condition.................................... $22,000 fective and serves a very good purpose. This rhythmic exercise becomes quite Phone (406) 599-5952, Bozeman, Montana area However, here lies the note of caution. Age historic and predictable. That is good, but and/or source verification regulated and ima note of caution certainly is advised. The peccable programs are used to verify to the BeefTalk column always ends with: “May you find all your ear tags.” Some appreciate letter what is being offered in the market and Custom cut and molded to your specs the note and others do not. to the consumer. There is no room for error. • Full dimension rough cut lumber Some producers meticulously account Therefore, as producers, care needs to • Custom sawing for every calf by individual ear tag number, be taken as to what one is certifying. It is • Custom molding even to the extent of expressing individual not unusual for a late afternoon call to the • Custom drying • Beams anxiety if a particular number is not presNDBCIA office from a feedlot verifying • Wood siding ent. In contrast, some producers display individual calf numbers. The feedlot may • Log railing considerable anxiety when the concept of have received or will be shipping soon a lot • Driveway arches 780 1st Rd. S individual ear tags even is discussed. of cattle that will be going into an age and • Bridge planks Vaughn, MT • Fireplace mantels With that being said, it is important to source or other identity-preserved program. • And much more..... note that all beef producers market into the The programs vary tremendously in what Phone Kenneth (406) 750-5779 or Luke (406) 788-7989 same marketing pool, which is the consumgenetic or management practices they are www.bigskysawmill.vpweb.com er. This consumer may be local, regional, marketing. However, the question is always e-mail: bigskysawmill@gmail.com national or international. Nevertheless, beef the same: “who is this calf?” is consumed. Recently, a feedlot was tracking down The North Dakota Beef Cattle Improvesome calves and made the comment that the ment Association (NDBCIA) has managed calves only needed to fit the defined group Japanese 4x4 Mini Trucks individual cattle ear tags for years, while the date of birth, so the individual birth dates did In Stock Now!! producers manage the cattle. The NDBCIA not matter. That is a true statement because has expanded the management of ear tags cattle are group or pen marketed. by adding age and source verification. However, the programs require that That process, at least for the NDBCIA, someone certifies that the individual calves is called CalfAid. The program is reviewed that make up the group are indeed the inand certified by the Agricultural Marketing dividual calves that were produced on the Service in the U.S. Department of Agriculranch. There is no room for error or apture. The NDBCIA is audited annually and proximately correct numbers. The calves certainly keeps updated with what is hapmust be correct. pening in the industry. Recently, the consequence of signing 40- to 50-miles per gallon! Thus, the note of caution as producgroup forms and certifying that the forms Clean, low mile trucks in stock. ers began to sell cattle this fall. Age- and are correct when, in fact, the forms were source-verification programs continue to not correct was in the news. Although the Call 406-434-2005 Delivery available! be an important part of marketing cattle. example is not about cattle, the same mesVisit us at: www.tomsminitrucks.com Although the speeches and exciting propossage is true. The North Dakota attorney als for marketing age and sourced calves no general and the North Dakota secretary of state recently noted in a news release that “the criminal NEW, DEMO & USED EQUIPMENT Vermeer 605 Super M net, flotation tires, moisture................. complaints allege that each NEW Vermeer BPX9000 Bale Processor ................................................................DEMO DISCOUNT of the circulators of a petition Vermeer 605 M net wrap, ramp, flotation tires............. $25,500 Vermeer 605L round baler with net wrap....................... $9500 are required to sign an affidaProcess both Round & Big Square bales Vermeer 605L round baler, twine only........................... $8500 Vermeer 605K round baler............................................. $5500 vit stating they witnessed all Vermeer 2300 rake....................................DEMO DISCOUNT The all-new BPX9000 Bale Processor from the signatures and that all the Vermeer combines simplicity, durability Vermeer 23 rake............................................................ $5200 and versatility to meet the needs of toVermeer 21 rake............................................................ $4000 signatures are genuine. Howday’s cattle producers. The easy to operWichman Ag Supply, LLC ever, the investigation found ate machine is built tough with a unique, 406-538-5686 or 350-2676 cell - Hilger, MT T-style frame, the bed design and offthat the statements were not set rotor produce even and consistent NEW & USED EQUIPMENT correct and that many of the feed with minimal maintenance, and an NEW Vermeer BPX9000 bale processor...............COMING IN optional large square bale kit includes individuals whose signatures Vermeer BP8000 processor, RH discharge. enhancements to effectively process a Vermeer 605K round baler......................................... JUST IN appeared on the petitions had variety of bales. The BPX9000 is built to Vermeer 605 Super I round baler...................................CALL maximize bale processing and minimize not, in fact, signed them.” InVermeer 605M with updates, net/twine...........................CALL operator stress. Vermeer Super M net/twine, ramps. dividuals are being charged. Vermeer WRV14 14 wheel rake.............................COMING IN The BPX9000’s slat and chain bed and posLikewise, when producers itive bale feeding improve bale rotation, Cox Ranch Equipment feeding bales more consistently into the 406-227-6697 or cell 594-2204 - Winston, MT sign an affidavit stating the rotor, while reducing the need for operaNEW & USED EQUIPMENT genetics and management tors to reverse rotation of the bale when Vermeer BP7000 bale processor, scales & LH delivery.$12,900 feeding. The split shaft in the bed allows for easier maintenance without removing the entire bed, and longpractices meet a particular Demo Vermeer R2300 rake. ............................BIG SAVINGS lasting bushings in the bed are resistant to net and twine wrapping. New Vermeer 605 Super M flotation tires, moisture tester, ramps marketing protocol, producVermeer 605 Super M 3000 bales.............................. $35,800 In addition, the bale processor’s offset rotor feeds material with less slugging, for a consistent cut length and ers are stating they know higher quality feed. With exclusive cut control bars in combination with the self-cleaning rotor, excessive Vermeer 605 Super M 4000 bales.............................. $34,000 Used Universal bale spear.............................................. $750 build-up of net and twine on the drum is eliminated. The rotor can also be manually cleaned, with easy acand can attest that every calf 8x16 Triple Axle pintle hitch equipment trailer with beavertail cess through a side-access door. and ramps................................................................... $2650 meets the requirements of Kelley 3 point backhoe................................................... $2500 the program. As in the case 6-ft & 8-ft., 3-pt. rear blades.................................$585 & $750 Hydraulic tampers, diggers & steel post pounders of filing petition signatures, New DewEze Bale Beds Arriving Soon it does not count that the maCUT your BALING TIME IN HALF by raking 2 windrows together R & L Seed and Machine, LLC. jority of the signatures were 406-735-4374 - Geyser, MT - rlmccray@3rivers.net valid. All the signatures must NEW & USED EQUIPMENT be valid. NEW Vermeer BPX9000 bale processor. Will process round Hydraulic rakes Hydraulically and big square bales............................................ IN STOCK DO NOT contact When selling calves with Adjustable Vermeer BP8000 RH discharge, big tires, like new.... $16,000 the ground to drive From Tractor Seat 2-NEW Vermeer 605 Super M round baler............. IN STOCK the potential of comingling so you won’t NEW Vermeer 665 Rancher round baler................ IN STOCK have dirt and rocks with other calves, it is wise Vermeer 605M round baler. Just in.......................In Our Shop in your hay. Vermeer 504 Super I 5x4 manual/electric tie. Price Negotiable to have calves individually John Deere 530 round baler..................................Consigned identified and recorded. NEW Vermeer VR1428 wheel rake.......................New Design NEW Vermeer VR1224 medium capacity carted wheel rake. So, may you find all your Whether you’re baling 100 acres NEW Vermeer WRX14 hi-capacity 14 wheel rake. 2 NEW Vermeer 2800 rakes.................................... IN STOCK or 1,000 acres, Vermeer Twinear tags. Rakes are built to last and de-

Vermeer R2300 Rakes

NEW Vermeer R2300 rake...................................... IN STOCK Used Vermeer R2300 rake.......................................... $14,500 John Deere 567 twine/net, going through shop.......... $18,500 McFarland 36-ft. pasture harrow......................NEW PRICING NEW Red Rhino 40-ft. round bale trailer............... ONE LEFT PULLEY & WELD-ON SPROCKETS ON HAND

Trendline Vermeer Sales 406-778-3777 (shop) - Baker, MT Greg - 406-978-3777 (cell) - Bill Bagley (sales) - 406-891-1060

signed to handle most kinds of heavy crops, rugged conditions and tight schedules. Plus, they have the best resale value in the industry!

TwinRakes

3’ - 6’ Windrow Widths (variable) 18’ - 23’ Raking Widths (variable) High capacity. Smooth, quiet, gentle handling. Speed. Reliabilty

##### On the Lewis and Clark expedition, the men spent the most amount of time in what is now North Dakota.

N.D. 4-H clubs promote good health

By NDSU Extension Service A record number of North Dakota 4-H clubs practiced eating smart and playing hard in 2011-12. Twenty-six clubs were recognized for demonstrating their commitment to a healthy lifestyle and are designated as a “Healthy North Dakota 4-H Club” for 2011-12. The 4-H clubs, with a total of 467 members, earned the special recognition for making “Eat Smart. Play Hard.” lessons part of their club meetings for the past year. Three clubs also earned extra recognition for completing the “Family Mealtime Challenge.” “Eat Smart. Play Hard. Together” is a statewide campaign that emphasizes the importance of making healthful food choices, getting regular exercise and families eating together. The North Dakota State University (NDSU) Extension Service and Bison Athletics teamed up to launch the initiative in 2005. This was the fourth or fifth year some clubs were named a Healthy North Dakota 4-H Club. This year, each club member received a certificate of recognition, flexible cutting board and 4-H Frisbee or sun visor. The clubs recognized this year are by county, number of members and number of years they have received the Healthy North Dakota 4-H Club recognition: • Barnes - Valley Friends, 17 members (third) • Burleigh - Caring Hands, six members (first); Driscoll Handy Helpers, four members (first); Haystack Butte, 29 members (second); McKenzie Magnums, 15 members (third); Sterling Livewires, 12 members (second) • Cass - Absaraka Crows, 10 members (first); Dragonflies, 26 members (second); Kindred 4-H Friends, 41 members (fifth); Page Power, 13 members (fifth); Rainbow Kids, 17 members (fourth); Uniters, eight members (fourth); Valley Adventures, 26 members (fourth); Wheatland Pioneers, 10 members (fifth) • Divide - Flickertails, 13 members (fifth) • Grand Forks - Eagles, 30 members (fifth) • Grant - Dakota Sky, 12 members (second) • LaMoure - LaMoure Cloverleafs, 15 members (first) • McLean - Lakeside 4-H, 40 members (first) • Morton - Missouri Valley Bunch, 26 members (fifth) • Ransom - Aliceton, six members (third); Helping Hands, 18 members (second); Hill and Valley, 13 members (first); Sandy Critters, 23 members (first), Tri County Ag, 30 members (first) • Stark - Western Roughriders, seven members (first) “We are very pleased to see the commitment of these club members and volunteer leaders to promoting healthy lifestyles within their 4-H club,” says Julie Garden-Robinson, NDSU Extension food and nutrition specialist and Healthy North Dakota 4-H Clubs program coordinator. “We hope that these habits remain with them for the rest of their lives.” Clubs are required to incorporate at least one nutrition or fitness activity into a minimum of six regular meetings during the year to be named a Healthy North Dakota 4-H Club. “As a club, we took this year to focus on eating healthy and getting regular exercise,” says Tracey Harter, leader of the Driscoll Handy Helpers 4-H Club. “Even though most of our members participate in regular extracurricular sports anyway, after meetings, we took turns playing a member’s sport of choice. We tried basketball, volleyball, baseball, football and a lot of trampoline time. We learned a lot of new ways to make our favorite snacks a little more healthy, such as incorporating more fresh fruits and veggies instead of the more processed ones.” Other activities that helped clubs earn recognition included taking walks, fishing, bowling, archery and swimming; attending demonstrations on first aid, CPR and hand washing; learning how to use a food thermometer; volunteering at a local food pantry; and taking care of gardens in the community. “Our club was surprised at how simple strategies can make such a difference in making your life healthier,” says Susan Schneider, leader of the Absaraka Crows 4-H Club. 4-H clubs interested in participating in the 2012-13 North Dakota Healthy 4-H Clubs program should contact their county Extension office or visit this website: http://www. ndsu.edu/4h/projects/group_projects/. ##### “We fashion children’s values one story at a time, one experience at a time. Knowing this, it’s my choice, while I’m still around, to spend the time with [the grandchildren] that I can and not leave it to chance or television to teach them what’s important.”

##### Freshly laundered towels might smell and look nice, but if they were washed with underwear, they could be contaminated with feces.

Trader’s Dispatch, October 2012 — Page C33

FOR SALE: 2000 FORD RANGER 4WD PHONE (406) 799-6923

New Highline CFR650 Feed-Chopper

• Place processed feed

in a windrow or in a feed bunk. • Spread bales up to 50ft. for bedding. • Process one bale while carrying another on the fork. • Hydraulic driven rollers with rubber belting ensure complete bale processing. • Available with Highline Feed-Chopper to further cut material

Come See Us At The NILE - Billings, Montana October 18th - 21st - Metra Park 2-NEW Highline CFR650 feed chopper with RH discharge. Final cut option available............. IN STOCK Used Branson 3510H hydro 4WD tractor, PTO, 3-pt. loader, 35-hp................................................ $18,000 Branson 3820I 4WD tractor, gear shift with reverser, PTO, 3-pt. loader.......................................... $21,500 Trendline Vermeer Sales 406-778-3777 (shop) - Baker, MT Greg - 406-978-3777 (cell) - Bill Bagley (sales) - 406-891-1060

NEW Highline CFR650 feed chopper........................... ................................................... CALL FOR PRICE Vermeer BP7000 bale processor........................ $8750 New Holland BR780 net/twine, wide pickup.... $11,500 Case IH RBX563 round baler, net/twine, standard pickup................................................................. $21,500 John Deere 700 (same as Vermeer R23A) rake.$9750 Wichman Ag Supply, LLC 406-538-5686 or 350-2676 cell - Hilger, MT

REALLY NICE CONTRACTOR OWNED EQUIPMENT

1997 Red River 42-ft. triple axle belly dump, good tires, good brakes. Work ready!....................................... $22,000

2005 Volvo 330BLC excavator, cab, air conditioning, hydraulic thumb, very clean, very tight, 8850 hours. Nice clean machine!......................... $85,000

1994 Dakota 42-ft. triple axle belly dump, 2005 Volvo EC290BLC excavator, cab, good tires, good brakes. Work ready!... air conditioning, hydraulic thumb, very ................................................. $19,000 clean, very tight, only 5300 hours. Nice machine!................................... $99,000

1988 Ranco 42-ft. triple axle belly dump, good tires, good brakes. Work ready!... ................................................. $17,500 2008 Asphalt Zipper Model 500, 159 hours, similar to new!............... $80,000

Phone 406-690-0737

1999 John Deere 5410 farm tractor with attachments. Mower deck, box scraper, forks, bucket, spring plow, rototiller, 762 hour!!........................................ $25,000

Carbon County ranch seeks to cover risk in retained ownership – Part IV

Trader’s Dispatch, October 2012 — Page C34

FUEL TANKS & BAT REEL FOR SALE 2000 gallon horizontal fuel tank. 3-500 gallon fuel tanks on stands. 30-ft. bat reel for Case IH 1010. Phone Mitch Konen, (406) 590-2649, Fairfield, MT

By James Sedman, a consultant to the Department of Agricultural and Applied Economics in the University of Wyoming College of Agriculture and Natural Resources, and John Hewlett, a farm and ranch management specialist in the department a 20-percent, margin-money deposit of We examined in previous articles vari$46,000. ous risk management options for Carbon Ideally, the price would have declined by County ranchers Norm and Belinda Bell. the time they buy back the contract in June, They are seeking the best way to protect and they will have made money. against falling prices for 155 head of reThe risk inherent in hedging is that the tained ownership steers. market could go the other way and cost We looked at using Livestock Risk Prothem substantial margin-money to keep tection (LRP) and Livestock Gross Margin the contract. (LGM) insurance. We now consider two The options market is one way to miniother alternatives – prepaying feed and usmize that margin risk because an option ing futures/options markets – and compare contract gives the producer the option of them with LRP and LGM to show how the exercising a futures contract at a certain Bells made their final decision. price for a premium paid up front. Prepaying Feed While there are margin requirements, The feedlot to which the Bells usually they are much less than for straight hedging send their steers offered them the option of because the margins are paid on the value prepaying feed – essentially locking in the corn of the options themselves and not on total price for the feeding period. contract value. While this option does not address posAssume that the June put option for fat sible cattle price declines, it does address feed price variability. cattle is trading at $115/cwt. with a premium The main disadvantage is the large upof $12.75/cwt. For 2,000 cwt. (four confront cost. In this case, assume the Bells will tracts), this would cost the Bells $25,500. prepay for 52 bushels per head (155 head If fat cattle prices fall below $115/cwt. total). This is 8,060 total bushels at a cost in June, the Bells would exercise the opof $6 per bushel resulting in a total cost of tion and use the difference to offset the $48,360. The current corn price is $6.25/ cash losses. bushel, which saves the Bells $0.25/bushel To simplify things, our analysis omits ($2,015 total). brokerage and other costs that should also Futures/Options Markets be considered. Further, we do not consider The Bells have also considered using the potential for the Bells to use futures or futures/options markets. The main problem options to manage feed cost risk, which the Bells see with using straight futures would further increase their up-front outlay. (hedging) contracts is the large up-front cost Strategy Comparison and the inherent variability of the markets. The results of the various strategies are For example, a June fat-cattle conin the Table 1. Note that, while the Prepay tract is trading at $115/cwt. Covering the Feed option is listed as a cost, this is just for Bells’ cattle on feed would require four, upfront cost comparison. Ideally, prepaying 50,000-pound contracts. Selling these feed should save the Bells money over the contracts ($230,000 total) would require feeding period.

HAY FOR SALE

Round bales starting at $125/ton delivered, depending on your location. Call for prices to your location and quality of hay you need. Call (406) 374-2464 or (406) 350-0571

50-Ton Crane

– Fork Lifts – – Winch Trucks – – Cherry Pickers – 24-Hour Service

DICK IRVIN TRUCKING 434-5583 – Shelby

Get More Done With a FREE PICKUP OR DELIVERY WITHIN 300 MILES!!

c kups used pi & w e N B LE AVA I LA State-of-the-Art Control Valve System with Wireless Remote-Standard and Optional Synchronized Squeeze Arms 2004 GMC 2500 HD 4x4, gas, regular cab, with DewEze 275

406-428-2272 - Tom’s ShoP Grass Range, Montana

Northern Hydraulics

GREAT FALLS

East of Fleet Wholesale

800-823-4937 • 406-761-8079 • www.northernhydraulics.net 2600 17th St. N E • Black Eagle, MT (Great Falls)

Serving Hydraulic Needs Since 1963 INDUSTRIAL • MINING • COMMERCIAL • AGRICULTURAL Cylinders • Pumps • Motors • Valves • Repairs & testing Hydraulic Clutch Flow Pump Divider

Hydraulic Filters All sizes & styles in stock

Valves

Complete line of Williams Hydraulic Pumps & Parts New H-98 & F-98 • 30 Series • 54 Series • 50 Series • 57 Series

CUSTOM BUILT HOSES

Hydraulic Motors TRW/Ross Tyrone Char-Lynn All Sizes in Stock Hydrostatic Exchange Hydrostatic Rebuilds

2 year warranty on all Hydraulics

Sundstrand Eaton Dynapower Denison All parts available

Hydraulic

Hydraulic PTO Pump Your source for

A&I pumps

High Pressure 1,2,4 & 6 wire hose assemblies available Hose Ends & fittings ALL SIZES

We are your Distibutor/Manufacturer for

New Complete Testing Facilities for Hydrostatic, Gear and Vane Pumps

NEW & REBUILDS • JOHN DEERE • CASE • IH • INTERNATIONAL

PUMPS

Hydraulic – Power Steering – Air Conditioning

Tractors – Trucks – Combines – Cars

AMERICAN & METRIC

After looking at their options, the Bells decide to use LGM insurance. First, it provides coverage against both declines in the cattle price and increases in the cost of feed. Second, the upfront premium cost is reasonable considering the cost of the other options (such as using futures/options). Third, there is no potential for cost increases (such as margin requirements) if market prices rise unexpectedly. For More Information: Visit a local crop insurance agent to learn about Livestock Gross Margin insurance and how it may fit your risk management plan. For more information on livestock risk management and other risk management topics on the Web, visit the Western Risk Management library at http:// riskmgt.uwagec.org/

Trader’s Dispatch, October 2012 – Page C35

WHY PAY MORE? BUY IN CAR TOWN! 2012 Dodge Grand Caravan Crew ONLY 16,000 miles, Stow and Go seating, WORLD CLASS 3.6 liter V6, and safety. You deserve the best! 2010 Ford F150 Lariat 4x4, super crew, 5.4L V8, automatic, bed liner, tow package.

2012 Dodge Ram 3500 4x4, Cummins diesel, automatic transmission, MUCH MORE! Regularly $48,045. $AVE NOW! $3523 Northern Chrysler Discount, $3250 Customer Cash, $1000 Trade in Assistance, OWN THIS TODAY for ONLY $40,272!!! CALL TODAY

2009 Dodge Journey AWD, V6, automatic. Local owner. This has had EXCELLENT care! Call today. 2012 Dodge Ram 1500 SLT 4x4, Quad cab! Only 14,000 miles and FULL WARRANTY! SAVE $$$ OVER NEW!

2004 Ford F150 supercab 4x4! One owner in great condition! 2008 Dodge Charger R/T AWD, 5.7L Hemi, automatic, heated leather, sunroof. FANTASTIC CAR.

2011 Dodge Ram 1500 SLT 4x4, Quad cab with FULL WARRANTY! $AVE NOW! 2008 Chevrolet Silverado 1500 4x4. PRICED RIGHT.

JUST IN! 2008 Dodge Grand Caravan in EXCELLENT condition!

JUST IN !!!!! 2005 Chevrolet 2500 4x4 extended cab, gas V8, automatic. GREAT running truck!

2009 Dodge Ram 3500 4x4, quad cab, Cummins diesel, cloth interior, tow package. Runs GREAT, and READY for work!

2004 Chrysler Crossfire! This baby is SPORTY and FAST!! Just in time for SUMMER FUN!!!

2008 Dodge Ram 2500 4x4, quad cab with the LEGENDARY Cummins diesel! Hurry, at this price IT WON’T LAST!

2005 Ford Expedition Eddie Bauer Edition 4x4, 5.4L V8, automatic.

2006 Nissan Altima SL 2.5L 4 cyl, automatic. Nice car!!

1995 Chevrolet 2500 4x4, gas V8, automatic. Perfect work truck. 2007 GMC Yukon Denali 4x4. LOADED! Leather, touch screen stereo, sunroof, MUCH MORE! Call today, this won’t be here long!

2006 Dodge Ram 1500 4x4, MEGA cab, Hemi V8, automatic. SAVE $$$.

Northern Chrysler has teamed up with TD Auto Finance.

Now with more financing options, getting your dream vehicle is closer than you think!

Northern Chrysler Toll-free 1-800-800-2299, local 406-873-2200 – 23 West Railway, Cut Bank, MT Website: www.northernchrysler.net E-mail: northernchryslerinc@yahoo.com

Matt

Kodiak

Karissa

Don

Trader’s Dispatch, October 2012 — Page C36

FARM EQUIPMENT FOR SALE 1992 Loral spreader truck New Noble 9000 Series 44-ft. air seeder

Call 406-485-2540 or 974-2568

EQUIPMENT FOR SALE

2004 John Deere 936 MoCo, 11’6” with impeller. 2010 Kuhn SR110 high speed rake. 1997 Vermeer 605K baler with less than 7000 bales. 3-point bale spear. Jeoffery 17-ft. plow, new twisted shanks and sweeps. John Deere 215 16-ft. tandem disk. Case 10-ft. offset disk. Ford 4-bottom rollover plow. Bearcat 12-ft. roller harrow. Broyhill 3-point sprayer, 200 gallon tank, 30-ft. booms. 1000 gallon fuel tank with stand. First reasonable offer takes the item, Call Greg 406-239-2431

JOHN DEERE TRACTOR FOR SALE 1968 John Deere 4020 tractor, 95 hp diesel engine, 8 speed powershift transmission, 3-pt., PTO, two hydraulic outlets $12,000 obo

Call 406-466-2615

FARM ITEMS FOR SALE

1980 Volvo diesel engine, 6 speed transmission, 11-22.5 real good tires. Runs well. Hoist works good. Asking..........$1500

Call 406-782-3648

International H, nice DuAl loader, new tires, runs excellent. Asking...$2000

1963 Ford F950 extra heavy duty, V8, 5 speed, new tires, air brakes. Asking...................$2000

TRACTORS WANTED TOP $$ PAID We want

Steiger: Turbo Tiger II, 3300, 1700, 2200, 1250, pre-1965. Versatile: 100, 118, 125, 300 Minneapois Moline: G1000 fwa, G900 fwd, 504 fwd, 604 fwd. Cockshutt fwd’s. John Deere 8020. Green Wagners. Allis Chalmers 210, 440, D21, 220. Oliver diesel tractors, running or not. International 826, 1026, 1206, 1456, 1468,1568, 4156, 4300. Rite 4x4 tractors. Big Buds. Also older front wheel drive or 4-wheel drive, running or not. Will pick up. Phone Nathan anytime (cell) 701-240-5737 or 1-800-735-5846

Zachary Stoltz of Valier’s Wingina 4-H Club shows his steer during the livestock show during Marias Fair in Shelby, Montana in August.

Prairie Fare: Try to waste less food for many reasons

By Julie Garden-Robinson, Food and Nutrition Specialist, NDSU Extension Service

Have you thrown out any food recently? Did you find less-than-appetizing food hiding in your refrigerator? Was it in an opaque container that may have startled you when you opened it to view the contents? Have you happened upon food well past its “use by” date in your cupboard or refrigerator? If you discarded food for any reason, you aren’t alone, according to a report published by the Natural Resources Defense Council. About 40 percent of food in the U.S. is tossed out annually, with a price tag of $165 billion a year. The losses can occur during farming, processing, distribution, retail and food service, and in households. Scientists estimate that cutting these losses by just 15 percent could feed 25 million Americans annually. Like many people our age, my husband and I grew up in families headed by parents who were young children during the 1920s and ‘30s when economic times were tough. Because money was especially tight during their formative years, our parents and their parents avoided wasting food. The tradition was passed on to us. While growing up, we regularly had leftovers for lunch or made use of them in other meals. Leftover boiled potatoes might become hash browns the next day. Leftover roast became soup or stew. We enjoyed tasty, abundant meals. We in nutrition often call the practice “cooking once and eating twice.” You can save time and money in the process. Our frugal traditions continue. I eat leftover food nearly every day for lunch. I figure it saves me at least $120 a month because I’m not buying my lunch. That adds up to more than $1,400 a year. Making use of your leftovers is good on several levels. On a larger scale, wasting less food throughout our food system is good for our environment. It can decrease methane emissions in landfills. The Natural Resources Defense Council provided some excellent tips, which I have supplemented a bit with some of the available resources from the NDSU Extension Service. • Shop wisely. Plan your meals and use a shopping list. For recipe and meal ideas, check out the online resources at http:// www.ndsu.edu/eatsmart. Click on “For Parents/Caregivers” to see more grocery shopping tips, shopping lists and economical recipes. Become a “Facebook friend” to

get regular tips and video recipes. • Know what the dates on the packages mean. Certain foods, such as baby food, “expire” and shouldn’t be used past a particular date. “Best if used by” indicates quality not necessarily safety, and you can use the food for a while beyond the date as long as it has been kept in the appropriate storage conditions. A “sell-by” date is meant for the store, which shouldn’t sell the product past that date. However, you still can use the food at home. For more information about food storage, including suggested storage times for a wide range of foods, see the “Food Storage Guide” at http://www. ag.ndsu.edu/pubs/yf/foods/fn579.pdf. • Don’t overlook imperfect produce. Just because vegetables aren’t photo-ready doesn’t mean they are inedible. Be willing to purchase and use fruits and vegetables with variations in size, shape or color. Dark bananas make good banana bread! • Freeze unused ingredients or leftover food. Use moisture-proof, tightly sealed containers. Find out how to freeze a wide variety of foods by checking out the “Food Freezing Guide” at http://www.ag.ndsu.edu/ pubs/yf/foods/fn403.pdf. Here’s a tasty recipe that you can make ahead of time and freeze. Just take it out and pop it directly in the oven. Leftover lasagna makes a tasty lunch, too. Freezer Lasagna 1/2 pound cooked ground beef 1 (26-ounce) can spaghetti sauce (reduced sodium) 1/4 c. Parmesan cheese 8 ounces cooked lasagna noodles 2 c. cottage cheese 1 1/2 c. low-fat mozzarella cheese 1 can (15.5-ounce) white beans, drained, rinsed Mix together beef and spaghetti sauce in a bowl. Puree beans and mix with the beef and spaghetti sauce. Mix together Parmesan and cottage cheese in another bowl. Layer in the pan the spaghetti sauce and cottage cheese mixes and then add mozzarella cheese. Repeat until you have three layers of noodles. Top with spaghetti sauce and more cheese. Freezer: Freeze in a 9- by 13-inch aluminum pan. Cook frozen, covered with foil, at 400 degrees for 90 minutes. Makes 12 servings. Each serving has 240 calories, 5 grams (g) of fat, 21 g of protein, 26 g of carbohydrate, 3 g of fiber and 420 milligrams of sodium.

Trader’s Dispatch, October 2012 – Page C37

John Deere 7520 tractor, John Deere 741 loader, grapple. #C010755............................$89,500 (4)

John Deere 7320, new John Deere 741SL loader. #C005165..........................................$79,500 (2)

2005 John Deere 7220, John Deere 741SL loader. Nice 95 hp tractor. #C008927............$77,500 (4)

John Deere 7130 Premium MFWD, 24/24 speed, 2 function joy stick, 3 SCV’s, air seat, new tires, 96” axles, 741 loader. C011516...............$78,500 (3)

John Deere 5425, loader, no cab. Extra nice. #C012286..........................................$43,900 (4)

John Deere 6430 Premium MFWD, 16 speed, 3 function joy stick, air seat, 50% rubber, 96” axles, 673 loader, no grapple. #C011522....................... . .........................................$81,000...$77,500 (4)

John Deere 7600 well equipped. #C004779............. . .........................................................$52,000 (3)

John Deere 6430 Premium MFWD, 16 speed, 3 function joy stick, air seat, 80% rubber, 96” axles, 673 loader, grapple. #C011520................ . ........................................$82,500...$79,500 (2)

John Deere 3010 tractor. #C003091..........$8500 (4) 1985 John Deere 4050 MFWD, Quad Range, 260 loader with grapple, dual SCV, 5300 hours. Call Boone in Missoula...........................$44,500

John Deere 4230, Quad-Range, 100 hp. #C000579. . .........................................................$17,900 (2)

John Deere 4960 MFWD, PowerShift, 42” duals, 20 front weights, 1500 lb rear weights, new rear tires. #C011400.................................$72,500 (4)

John Deere 2955 tractor. Nice. #C010989................ . .........................................................$17,500 (4)

John Deere 3055 2WD tractor, no cab, no loader, 5000 hours. #C010380......................$18,500 (2)

CULTIVATORS

John Deere 12-ft. pull type cultivator. #C012596...... . ............................................................$3500 (3) Noble 16-ft. field cultivator. #52970658......$1250 (3) Melroe 20-ft. field cultivator. #50020642.......$800 (3) Ford 208 30-ft. cultivator. #50020292...........$450 (3) Ford 3-pt. 10-ft. field cultivator. #C012449..$1250 (2)

John Deere 2950 MFWD tractor, 740 loader. #C010406..........................................$19,500 (2) John Deere 2955, loader, grapple. #C013412.......... . .........................................................$21,000 (3)

TILLAGE

Flexi-Coil S75 packer. #C009303...........$14,900 (4) John Deere 950 roller harrow. #C011097..$4900 (4) John Deere 3955 5 bottom switch plow. #C008706.. . ............................................................$4500 (2) Melroe 5 bottom pull plow. #50020382.........$900 (3) John Deere 2 bottom plow, 3-pt. (Near new). #C009371.............................................$1100 (3) Ford semi-mount 5 bottom plow. #50202991............ . ..............................................................$500 (3) M-M 16-ft. chisel plow with harrows. #50001027....... . ............................................................$1750 (3)

DISKS

John Deere 22-ft. disk. #C011298.............$4900 (3) John Deere 230 12-ft. disk (Very heavy) #C013615. . ............................................................$5900 (4) John Deere 220 22-ft. disk. #C010016......$2950 (4) John Deere 215 14-ft. tandem disk. #C013613........ . ............................................................$5900 (4) John Deere 4000 12-ft. disk. #C012365....$4900 (3)

DRILLS

John Deere 630 25-ft. disk (Nice disk) #C013486.... . .........................................................$19,500 (3)

Melroe 5 bottom pull plow. #50020382.........$900 (3)

MISC. TRACTORS

John Deere 6400 MFWD, loader. #C002805............ . .........................................................$42,500 (3) John Deere 5410, loader. #50140128....$32,000 (2) John Deere 5025 4WD, cab, loader. #C012938....... . .........................................................$55,000 (2) John Deere 5020RC, PTO, duals. #C013485........... . ............................................................$7500 (3) John Deere 4010, no 3-pt. #C013039.......$8500 (3) John Deere B tractor. #C008716...............$2500 (3) International 1066 tractor (lots of repair). #C009802..........................................$15,000 (3) International 560D with post driver. #C010537........ . ............................................................$3900 (4) John Deere 450, 13-ft., 7.5” spacing. #C010552...... .............................................................$11,500 (4) Seeder box attachment for John Deere 450 13-ft. 7.5” spacing drill. #C011098......................$750 (2) Midland Pride overseeder. #C011155.......$3900 (3) Massey Ferguson 33 13-ft. end wheel grass seeder attachment. #C010934............................$2000 (4)

John Deere 970 25-ft. roller harrow, solid & solid. #C005559.............................................$21,500 (4)

AerWay 12-ft. #C007244............................$7900 (3)

John Deere 3600 6 bottom pull plow. #51010131..... ................................................................$4900 (4)

John Deere 915 3-pt. 15-ft. roller harrow. #C003411 . ............................................................$2900 (4)

John Deere BWF 21-ft. tandem disk. #C006471...... ................................................................$2950 (4)

New MacDon 972 25-ft. swather header.#C011059 Call John 406-752-2828, cell 406-250-6121 (3)

John Deere 3100 5 bottom pull plow. #C003977...... ................................................................$1900 (3)

John Deere 714 mulch-tiller, 7 shanks. #C006033... . ............................................................$9000 (3)

John Deere 230 23-ft. disk, wings. #C013614.......... . ............................................................$6900 (4)

(2) Missoula, MT

(3) Kalispell, MT

(4) Ronan, MT

Triple W Equipment

1-800-223-5744 — 406-549-4171

1-800-521-4783 — 406-752-2828

406-676-3578 — Cell 406-250-6120

North Central Montana deer and elk hunting outlook

Trader’s Dispatch, October 2012 — Page C38

Advertising Deadline for the November issue of the Trader's Dispatch will be November 2.

By Bruce Auchly, MFWP, Region 4, Great Falls, Montana The news for big game this fall in north central Montana is decidedly mixed. Elk and white-tailed deer numbers are solid. However, that’s Suppertime Stoves, Moore, MT 406-374-2778, leave message generally not the case for antelope and mule deer. For hunters that means numerous opportunities to hunt antlerless elk and whitetails, but lower quotas and fewer antlerless licenses for antelope and mule deer. Also in much of Fish, Wildlife and Parks Region 4 hunters may take only buck mule deer on their deer A tag. The consistent good news starts with elk. “We have lots of elk,” says Brent Lonner, FWP wildlife biologist in Fairfield. Lonner oversees hunting districts south of the Teton River along the Rocky Mountain Front. Last winter, Lonner counted about 2,700 elk on the Sun River Wildlife Management Area west of Augusta. “That’s on the upper end of what we want,” he says, “and the number of bulls are still above average.” Maximum weed kill at a minimum cost! 1 The Sun River WMA is a traditional wintering range for Choose the 1” or 1 /4” round, self-turning rod. • Fits all cultivators • Easy to pull, saves fuel • No drive required. elk on the Front. • We build special applications for air drive • U-joint adapter for rocky conditions Mule deer numbers are slowly improving, Lonner says. • Optional rod weeder transport bracket mounts on cultivator frame. “It’s better than 10 years ago, but not like it was in the late Remove one pin and you can set the rod in the transport bracket. 1970s and ‘80s.” When rod is needed you can install in about 5 minutes. And white-tailed deer are plentiful, he adds. Dealers for the A M Rodweeder, Quick Attach Brackets and Transport Brackets. Around Great Falls and south in the Little Belt Mountains MONTANA DEALERS the story is the same. Ben Taylor Farm Store . ..........................................Valier, 279-3365 Jorgenson Land Co........................................ Broadview, 667-2140 “There are plenty of elk in and around the Little Belt MounChurchill Equipment....................................... Manhattan, 282-7252 Joyce Fuel & Feeds............................... Geraldine, 1-800-479-4561 tains,” says Adam Grove, FWP wildlife biologist in White SulFrontline Ag.............................................. Choteau, 1-866-466-5741 Moodie Implement............................... Great Falls, 1-888-760-2005 Frontline Ag................................................ Conrad, 1-877-278-5531 Sunrise Equipment..................................... Sidney, 1-800-967-3597 phur Springs, adding getting to those elk can be problematic. Frontline Ag............................................Cut Bank, 1-800-273-5530 Taylor’s True Value Farm Store................... Shelby, 1-888-220-5547 “Access is the issue on private land. On public land, elk Gerbers of Montana Inc..................................Great Falls, 727-2203 Tiber Tractor, Chester .........................................Chester, 759-5188 Glasgow Implement........................................... Glasgow, 228-9341 Torgerson......................................................Havre, 1-800-800-3113 availability depends on hunting pressure and weather,” he says. Harlem Supply.......................................................Harlem, 353-2262 Torgerson............................................. Lewistown, 1-800-677-8795 Hunter pressure and early winter weather can push elk from Hoven Equipment Co.....................................Great Falls, 727-7153 Zerbe Bros................................................Glasgow, 1-800-228-5393 national forest land onto private lands where access is limited. WASHINGTON DEALERS While there are still lots of white-tailed deer, Grove says, Ag Engineering...............................Kennewick, WA (509) 582-8900 mule deer numbers in the Little Belts continue to be down. A M Rod Weeders made by American Manufacturing This spring the number of fawns that survived the winter was Montana toll-free 1-800-345-2083 or 406-379-2676, Hogeland, MT up, but the population rebound won’t quickly. “It will take several years to get back to normal,” Grove says. “Weather is a big factor.” Toll-Free 1-800-722-5277 Overstock Sale On In the Lewistown area elk Local 466-2290 22 Third NE, Choteau, MT Transfer Cases numbers are up and mule deer FORD and antelope numbers are ‘06 F250 automatic trans- ‘95 transfer case...... $450 Mention this down. And access is the key. mission................. $850 ‘94 F350 rear axles, 4.10 ad & receive gears. . ................... $600 ‘03 F450 van dually rear “There are lots of elk, but Don’t CRUSH it! We’ll BUY it! $20 Discount axle....................... $800 ‘94 F150 transfer case..... access is difficult,” says Sonya We buy late model used and wrecked pickups ............................. $400 ‘03 F450 van 4R100 auto transmission......... $600 ‘93 F150 4.9L V8 motor Smith, FWP wildlife biologist ‘02 5.4 Triton V8 motor..... ‘93 Explorer auto trans, in Lewistown. CHEVROLET & GMC DODGE 2WD...................... $600 ........................... $1200 ‘03 Suburban rear axle.... ‘95 6.5 turbo diesel, auto- ‘05 Caravan 3.3 V6, auto- ‘95 318 V8 for Dakota...... ‘02 5.4 engine........ $1000 ‘93 F250 transfer case..... Also, much of the area matic transmission........ ...............................Call ............................. $700 ‘01 4x4 Super Duty V10 matic transmission.. Call ............................. $450 around Lewistown is only .............................. $500 ‘01 transfer case for Cum- ‘95 Dakota 4x4 transfer ‘01 8.1L engine...... $1250 ‘93 4.0 V6 motor...... $400 automatic transmission 1 ‘01 GMC 1500 5.3 V8 ‘95 4x4 transfer case....... case...................... $600 ‘99 5.4 4x4 transmission mins diesel..............Call open to elk hunters with spe‘91 /2-ton 4x4, 3.5 axles.. ............................ .$500 ‘01 Dakota automatic ‘95 3/4 ton 4x2 rear axle.... ‘99 F150 manual trans for engine................... $450 ............................. $450 cial permits or B licenses that ‘01 4x4 6 speed transmis- ‘95 1500 rear axle.... $475 transmission.......... $400 ............................. $500 4x4........................ $950 ‘91 Explorer transfer case 1 sion....................... $850 ‘93 /2 ton 4x2 auto trans- ‘00 318 V8 engine.... $700 ‘95 Dakota 4x2 5 speed ‘99 F150 4x4 transfer were drawn in a lottery this for 4.0 motor........... $250 ‘01 GMC 1500 automatic mission................. $550 ‘00 1/2-ton 4x2 rear axle... transmission......... $500 case...................... $650 ‘87 rear and front axles for summer. There are exceptions 3 transmission.......... $500 ‘92 /4 ton 4x4 transmission 1 ............................. $600 ‘95 1500 4x4 transfer ‘99 van auto trans for V10 /2-ton.................... $400 ‘01 GMC 1500 transfer (#4L60E)............... $600 ‘00 Dakota 4x4 automatic and elk hunters should read the 3 case...................... $500 motor.................... $550 ‘86 /4-ton 4x4 4 speed case...................... $500 ‘92 S-10 4x4 auto transtransmission......... $500 ‘93 3/4 ton front and rear ‘98 F150 Romeo 4.6L V8 transmission.......... $300 regulations first. ‘01 Blazer transfer case... mission.................. $600 ‘99 Durango 5.9 automatic axles, 3.55 gears.......... motor......................Call ‘85 3 / 4 -ton dually rear Mule deer numbers are ............................. $300 ‘92 transfer case...... $500 transmission......... $650 .................... $650 each ‘98 F150 automatic transaxle....................... $750 ‘01 GMC 1500 rearend.... ‘92 3/4 ton 4x4 rear axle ‘99 Dakota transfer case.. ‘91 3/4 ton 4x4 front axle... down in the Missouri Breaks, ‘85 208 transfer case.$450 mission...................Call ............................. $500 assembly................Call 1 ............................. $500 ............................. $600 but the numbers improve on ‘01 GMC 1500 various ‘92 transfer case...... $500 ‘98 Dakota, transfer case. ‘91 Caravan AWD auto ‘98 /2-ton 4x4 auto trans- ‘76 4x4 4 speed transmismission................. $750 sion....................... $275 body parts...............Call ‘91 3/4 ton 4x4 rear axle, .............................. $500 transmission.......... $550 ‘98 4x4 transfer case....... the prairie south of the Mis‘00 5.3L V8 engine... $400 3.73 gears............. $600 ‘98 1/2 ton parts...........Call ‘90 205 transfer case for NISSAN . ............................ $500 souri River. ‘00 Silverado 5.3 engine, ‘90 241 transfer case....... ‘97 3/4 ton 4x4, automatic automatic.............. $650 ‘98 1/ 2-ton 4x4 transfer ‘04 XTerra manual trans115K miles............ $750 ............................. $450 For example, in HD 410, transmission ‘89 Dakota front and rear mission................. $950 case...................... $400 ‘00 S10 4x4 auto...... $600 ‘89 1 ton single wheel rear ‘97 3/ 4 ton 4x4, transfer axle assembly........ $500 ‘97 F250 transfer case..... ‘95 4x2 automatic transwhich includes the Breaks ‘00 S10 4x4 transfer axle....................... $650 case ‘89 4x4 1/2 ton auto transmission................. $650 ............................. $600 case...................... $250 ‘89 4x4 4 speed transmis- ‘97 3/4 ton 4x4, 4.10 ratio north of Winnett, the fawn to mission................. $425 ‘97 F250 front and rear ‘93 Pathfinder automatic ‘00 Silverado 4x4 axle..... sion....................... $450 1 rear end ‘84 Ram / 2 ton, 318 V8 transmission......... $900 axles.......................Call doe ratio last winter was 49 ...............................Call ‘86 1/ 2 ton 4x4 transfer ‘96 3/4 ton 4x2, 3.55 rear end motor..................... $500 case...................... $450 ‘96 Dakota 4x4 automatic ‘84 Ram 1/2 ton, 4 speed ‘95 4x4 automatic trans- ‘92 4x4 pickup 5 speed ‘99 3/4 ton rear axle... $450 to 100. transmission...........$500 mission for 5.4........Call ‘99 350 V8 engine.... $950 ‘86 1/ 2 ton 4x2 4 speed transmission..........$650 transmission......... $300 ‘95 F250 4x4 rear axle..... ‘89 front & rear axles.$350 In HD 419, which touches ‘99 6.0 V8 engine..... $800 transmission......... $275 ‘96 Dakota front and rear ‘80 W250 front and rear ............................. $550 ‘98 4L60 automatic trans- ‘84 C60 5 speed transmisthe towns of Geyser, Denton TOYOTA axle assembly........ $475 axles..................... $500 sion....................... $700 ‘95 3/ 4 ton 4x2 5 speed ‘74 transfer case...... $300 ‘95 1356 transfer case..... mission................. $800 and Hobson, Smith counted ............................. $450 ‘97 4-Runner 3.4 V6 en‘98 1/2 ton auto transmis- ‘84 3/4 ton 4x2 rear axle.... transmission......... $800 gine.................... $800 sion....................... $650 ............................. $500 57 fawns per 100 does. ‘97 4-Runner 4x4 auto MISC. ‘98 1/2 ton axle assembly.. ‘84 30 2WD auto transmisJUST IN PARTING OUT White-tailed deer are still transmission....... $600 sion....................... $400 ............................. $600 ‘98 Olds Bravada auto‘95 4-Runner, 5 speed rebounding from last year’s ‘98 305 engine......... $600 ‘83 1/2 ton transfer case.... ‘07 Chevrolet Silverado 1500 4x4, 4.3L, auto matic transmission..$500 transmission....... $500 ‘98 4x4 automatic trans...............................Call ‘06 Pacifica1 Touring AWD, 3.5L, auto ‘98 Jeep 4.0 engine..$600 outbreak of epizootic hemormission................. $600 ‘83 1 ton 4x4 transmis- ‘04 Dodge /2 ton 4x4, 5.7L Hemi, auto ‘98 Volkswagen Passat.... ‘93 5 speed transmission for V6................. $750 rhagic disease (EHD). ‘98 transfer case...... $500 sion....................... $375 ‘04 Ford Escape 2WD, 3.0 V6 ...............................Call ‘97 1/2 ton transfer case.... ‘81 1 ton 4x4 rear axle..... ‘02 Dodge Durango ‘97 Kia Sportage........Call ‘87 rear axle............. $250 “So far we’ve had no re............................. $600 ‘01 Dodge 2500 4x4, extended cab, long box, V8, ‘97 Jeep Wagoneer trans- ‘87 front axle... .........$250 ............................. $600 1 ports of the disease this year,” automatic ‘97 4x4 4L60E transmis- ‘81 /2 ton 4x4 front axle... mission................. $650 We rebuild sion....................... $600 ............................. $350 ‘99 Ford F150 4x4, 5.4, V-8, auto Smith says. ‘96 Jeep auto transmis1 transmissions, transfer ‘98 Ford Explorer 4x4, 4.0 V6, automatic transmission

Wood Burning Cook Stoves, Heaters & chimneys

Montana made...

Rod Weeder

J.A.R.R

‘96 S10 4x4 auto transmission................. $500 ‘96 S10 transfer case....... ............................. $450 ‘96 4x4 transfer case....... ............................. $400 ‘95 6.5 turbo diesel engine..................... $2300 ‘95 4x4, NV3500, 5 speed transmission......... $800

‘81 /2 ton rear axle..... $350 ‘77 1 ton, 350 engine....... ............................. $700 ‘77 205 transfer case....... ............................. $400 ‘77 3/4 ton rear axle..... $300 ‘74 4x4 4 speed transmission....................... $300

‘98 GMC Jimmy 4x4, 4.3 V6, automatic transmission ‘98 Dodge 2500 4x4, extended cab, V10 gas and 5-speed manual ‘97 Dodge Dakota 4x4, 5.2L, automatic transmission ‘96 Dodge 2500 2WD extended cab, Cummins, high miles, good body parts ‘96 Dodge 2500 2WD, 5.9 Cummins, 5 speed manual ‘95 Chevrolet S10 pickup, 2WD, 4.3 V6, automatic transmission

sion...................... .$625 ‘95 Honda Passport auto transmission......... $625 ‘95 Rodeo automatic transmission......... $500

cases and rear axles.

– Parts Locator Service –

Used pickup body parts

Call us to see if we have the used parts you need.

##### I’m going to to bop until I drop. –Eighty year old grandmother of five who taught dance and exercise classes for more than thirty years.

Trader’s Dispatch, October 2012 — Page C39

• TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT •

USED BELLY DUMP

* Prices subject to stock on hand

NEW 3-point Bale Unroller

• TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT

SPECIAL OF THE MONTH New Diamond C 5x8 dump trailer.

1996 General 40-ft. tandem axle belly dump.

$4495

$14,500

$1200

New Dump Trailers

New Diamond C & DCT car haulers

New Haulmark Enclosed Trailers

16-ft. & 18-ft. IN STOCK

New Circle D pickup flatbeds

New Travalong 14-ft. bumper pull dump trailers........................ $8995 New Travalong 14-ft. gooseneck dump trailers.................................. $9995 New Diamond C 14-ft. bumper pull dump trailer.......................... $7995

Excellent Selection On Hand

3500, 5200 & 7000# axles

7x7...................... $1450

71/2x81/2............... $1450 71/2x9.................. $1520

NEW STOCK & HORSE TRAILERS

2-New Circle D 24-ft. gooseneck stock trailer, full bull package. Ea.................. $10,195 2-New Circle D 20-ft. gooseneck stock, full bull package. Each........................... $9195

8x9...................... $1850 Circle D flatbeds, gooseneck hitch plate, 8x11.................... $2150 lights, headache rack, rear skirt. Black

USED EQUIPMENT

4x7’ Heavy duty Trailer Mats.....Each $65

NEW SKID STEER TRAILERS

2-Circle D 20-ft. gooseneck skid steer trailers, 80” wide, 7000# torsion axles, fold-over ramps, tread plate fenders, treated wood floor, radial tires. Each......................$5895 2-New Circle D 18-ft. bumper pull, with 16” tires, 7000# axles, ramps. Each........$4695

NEW UTILITY FLATBED TRAILERS

18’x81” heavy duty car hauler, wrap tongue, 6” channel frame, brakes on two axles, 7000 lb. axles.................................................................................................... $3995 18’x81” deluxe car hauler, wrap tongue, set back jack, brakes on two axles, ramps, 5200 lb. axles............................................................................................................. $3695 18’x81” deluxe car hauler, wrap tongue, brakes, 3500 lb. axle............................. $2895 16’x81” deluxe car hauler, wrap tongue, set back jack, brakes, ramps, 3500 lb. axles... . ......................................................................................................................... $2695 12’x60” utility angle sides, 3500 lb. single axle, ramp gate................................... $1525 10’x60” utility angle sides, single axle, 3500 lb. axle, ramp gate........................... $1475 8’x60” utility angle sides, no tilt, 3500 lb. single axle............................................. $1340

NEW HEAVY DUTY FLATBED TRAILERS

Big Tex 51-ft. tandem dually car hauler with electric winch and rails for hauling trailers. 20,000 GVW. Excellent, like new..................$9500

2008 Chevolet 1/2-ton 4x4, extended cab, V-8, 7-ft. flatbed, 102,000 miles............$13,995

1-New Circle D 31-ft. triple axle gooseneck with 7000# axles, 12” I-beam frame, folding beavertail, 2 jacks, 21,000 GVW........................................................................$9195 2-New Circle D 25-ft. (including 3 piece beavertail) 2-7000# axles, 16,000 GVW. Each...................................................................................................................$6795 1-New Circle D 27-ft. (including beavertail) tandem dually gooseneck.................$9195 1-New Circle D 29-ft. (including beavertail) tandem dually gooseneck..................$9495

TURNOVER BALL A hitch when you need it...A level bed when you don’t COMPANION™ 5th WHEEL RV HITCH

Mounts to rails bolted under the bed, or attaches easily to B&W’s turnover ball gooseneck hitch. Easy adjustment of height & lateral positions.

G ll – steel flatbeds

Gooseneck & Bumper Pull

Tuffloader Tilt Trailers

Gooseneck model: Bumper Pull model: 6-ft. stationary deck with 16-ft. tilt deck 4-ft. stationary deck with 16-ft. tilt deck Both models have 18” treadplate approach

Triple T Sales Contact Dave Taylor; 406-357-2166

Chinook, MT

Home Phone - 406-357-2162 Highway 2 West, Chinook, MT 1/2 miles west of Chinook

1990 International 4600 water truck, 2000 gallon tank, front/ rear/side spray, hose reel....... . ................................$14,500

PINTLE HITCH TRAILERS Your Choice....$6500

2004 International 9400 with ISX Cummins, 10-speed, excellent rubber, approximately 950,000 miles............$21,000

HMDE 24-ft gooseneck flatbed.... . .....................................$800

Travalong 20-ft. gooseneck stock trailer...................$4995

Load Trail utility trailer with sides............................$1600

DCT 25-ft. pintle hitch trailer with beavertail & ramps. 53-ft. van trailers.......................... . ................Starting at $5500 Towmaster 25-ft. pintle hook trailer, electric brakes, 20,000 GVW.

Ditch Witch trailer...............$900

8x81/2-ft. steel flatbed with tool box.................................$500

4x6 Utility trailer with wooden storage box....................$550

New General 5-ft. & 6-ft. Rotary Cutters IN STOCK

Your

Dealer

Available options include: for North Central MT hydraulically powered & the Hi-Line area supplement feeder & hydraulically powered post hole. Get the most out of your pickup with a Hydra-Bed™, the only true flatbed with high-speed bale handling. From the comfort and safety of your pickup cab, anyone can pick up, haul and unroll two bales with ease. Also available: Hydra-Bed™ 2200 Series. Fits existing flatbeds.

Large Trailer Parts Inventory • Axles • Springs • Lights • Fenders • Straps • Tie-downs • Bearings & seals • Jacks • Etc.

TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT •

TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT • TTT

Fast facts on pinkeye for producers

Trader’s Dispatch, October 2012 — Page C40

TRUCK FOR SALE

By Dr. Michelle Arnold, Large Ruminant Extension Veterinarian, University of Kentucky

White Volvo 60,000, hydraulic roll off, nice unit. Phone 406-799-6923 or 761-8147

Attention Farmers & Ranchers Don’t have time for your fence work?

We have equipment and manpower to get the job done.

Give us a call for all your fencing needs.

DURNELL FENCING, LLC

Mike Durnell (406) 279-3299 or (406) 899-2635, Valier, MT

Woody’s Lumber & Sawmill, LLC Established in 1999

Accurately Sawn Rough Lumber Custom Cutting - Our Logs or Yours Log and Star Drive Screws Turn Your Bug Kill into Valuable Lumber Impressive Log Archways Beams up to 24” x 24” x 20-ft.

www.woodyslumber.com

Helena, Montana

5400 Birdseye Rd.

406-443-6538

TRACTORS Case IH Puma 195 MFD, 540/1000, 3 point, PTO, 3 remotes, 18.4x42 duals, powershift with creeper, differential lock, end of row shift, LX770 loader, 8-ft bucket, grapple, grill guard. 4275 hours......................... $84,900 Case IH MX 230 MFD, 3 point, PTO, 4 remotes, 18.4x46 duals, end of row turn, differential lock, front weights, quik hitch............................................................ $69,500 Case IH MXM 190 MFD, 3 point, PTO, powershift, auto shift, end of row, KM loader, 8-ft. bucket. 3100 hours..... ........................................................................... $75,900 Case IH MX 305 MFD, 3 point, PTO, powershift with creeper, 5 remotes, weights, 3900 hours...................$117,000 Steiger 485 4x4, 710x42 duals, end of row, auto shift, differential lock, front & rear weights, 4 remotes, Auto Guide ready. 1200 hours.................................. $204,500 Case IH STX 380 4x4, 710x42 duals, powershift, differential lock, end of row, bar axles, grid heater, IVECO engine, turbo, Radar............................................. $124,900 Case IH 535 quad track, 30” tracks, powershift, differential lock, 5 remotes, weights, glass caps on track idlers. 1754 hours....................................................... $257,000 New Holland TV 6070 3 point, PTO both ends, 3 remotes, 480x85R34 tires, loader, bucket, grapple with 16-ft. hay head. Only 1293 hours..................................... $108,500

COMBINES

Case IH 8010 grain loss, yield and moisture monitors, rock trap, chopper, spreader, bin extension, AFX specialty rotor, Honey Bee SP36 draper header, fore/aft, IVECO 6 cyl engine. 1667/1240 hours.................................... $163,500 Case IH AFX 7010 yield and moisture monitors, Pro 600 color touch screen monitor, grain loss monitor, rock trap, lateral tilt, speciality rotor chopper, IVECO engine, 2010 header, fore/aft, pickup reel, auto head control, 30-ft. 1324/1050 hours................................................. $183,000 Case IH 2388 specialty rotor, rock trap, spreader, ride control, 1010 30-ft. pickup header. 1803/1491 hours............ ......................................................................... $131,500 John Deere 9650 STS 25-ft header, 1900 hours, 200 hours on new Reman engine....................................... $98,500 John Deere 9760 STS Contour Master, rock trap, grain bin extension, chopper, feeder reverser with 630R 30-ft auger, fore/aft................................................... $136,900

EAGLE EQUIPMENT Bill Smith, Broker

St. Anthony, ID Belgrade, MT 208-558-7015 406-388-8171 Mobile ph. 208-351-7177 FAX 406-388-8119 e-mail: eagleequip@fairpoint.net

Cause: The bacteria Moraxella bovis. It sticks to the surface of the eyeball (the “cornea”) with hairlike projections called “pili”. It also releases a toxin that kills the cells on the surface of the cornea, leading to the characteristic corneal ulcers seen with this disease. The organism is located in the eyes and nasal cavities of infected cattle. Cattle are the only known reservoir of Moraxella bovis and infected carrier animals may harbor this organism year round without showing any signs of eye problems. Once pinkeye begins in a herd, it is highly contagious and can spread rapidly by direct contact through nasal and ocular discharges and by vectors such as flies. Contributing Factors or “risk factors”: Many different combinations of these factors working together can occur within one herd at one time. 1. UV light or sunlight-Causes damage to corneal epithelial cells, allowing the bacteria to penetrate the cornea and multiply. Lack of pigment around the eye allows increased UV radiation to sensitize the eye, resulting in inflammation and infection. 2. Face Flies-These pests contribute to pinkeye in two ways. They irritate the eye when feeding on secretions then they efficiently transmit the organism from infected to non-infected animals. These insects may harbor the bacteria on their wings and legs for up to three days after feeding on infected material. 3. Excessive Eye Irritation-This may be due to dust, trauma or injury, wind, tall grass with seed heads, thick-stemmed hay, or high ammonia levels. Grazing close to thorns, barbed wire, and tufts of dry grass can scratch the cornea. Pollen and seed heads, especially in unclipped pastures, may injure the eye. Any irritation to the eye allows Moraxella bovis to invade and cause pinkeye. 4. Other Microorganisms-Certain viral diseases (IBR and BVD) and bacteria (Mycoplasma, Chlamydophila) may be contributors to pinkeye in certain cases. They can either create the right environment for infection or add to the severity of the disease. A newly isolated strain of bacteria known as “Moraxella bovoculi” may play an important role in pinkeye but research has not confirmed this. 5. Stress-Weaning, commingling, transport, poor nutrition, parasites, and weather are just a few examples of stressors for cattle. Stress tends to decrease the animal’s immune response to disease. Treatment: Preventing spread by treating affected animals is the single most important factor in controlling a disease outbreak. 1. Early detection of animals with the first clinical signs (tearing, squinting, and blinking) and then prompt, effective treatment are essential to reducing spread and limiting damage to the eye. If possible, isolation of the affected animal away from the herd will also help limit the spread. In cases where a producer is unable to treat new cases quickly, giving an injectable antibiotic to all susceptible animals along with topical fly repellant may be the best course of action to reduce the spread of pinkeye in the herd. 2. Early and effective treatment with the correct antibiotic reduces the duration of the carrier state when spread usually occurs to unaffected herd mates. Long-acting antibiotics such as long-acting tetracycline (LA 200®) or the prescription antibiotic Draxxin are labeled for treatment of pinkeye. Your veterinarian may prescribe the antibiotics Nuflor or Excede to be used in an off-label manner for treatment as well. Injectable antibiotics are generally the best option

because they last much longer than a topical spray or an injection under the conjunctiva of the eye and are much more effective in eliminating the bacteria. 3. Topical sprays only remain in the eye a few minutes before tears wash them away so application is generally required 3-4 times daily. A popular over-the-counter preparation known as Vetricyn pinkeye spray is a sodium chloride and hypochlorous acid solution directed to be sprayed into the eyes 2-4 times per day until the animal is healed. No veterinary research has been conducted to date on this solution or its efficacy but it is difficult for any spray to remain in the eye long enough to eliminate the bacteria. 4. When severe ulceration exists, the eyeball may need extra protection with either a patch or the eyelids may need to be sutured together. Patches may protect from light, flies and other irritants but do not physically support the stability of the globe and they remove the ability to monitor the affected eye. Consult your veterinarian for assistance in these methods on how and when to apply them. Prevention: Pinkeye is a complicated, multifaceted disease. It is often stated that “an ounce of prevention is worth a pound of cure” and this is nowhere more appropriate than with pinkeye. The best plan is to reduce or remove as many risk factors as possible in order to keep the eyes healthy and better equipped to fend off disease. Prevention is based on maximizing herd immune status, minimizing the presence of pathogens, and maintaining as irritant-free environment as possible. 1. Maximize Herd Immune Status- An overall good level of nutrition, adequate vitamin and trace mineral intake, a comprehensive vaccination program, and parasite control are all exceptionally important in improving the cow’s ability to fight off any disease process (not just pinkeye). There is no scientific evidence to support feeding excessive levels of Vitamin A to prevent ocular disease. 2. Maintain an irritant free environmentPrevent eye irritation with good face fly control, mow tall grass, and reduce sources of stress (such as overcrowding/overgrazing) if possible. Control face flies with ear tags impregnated with insecticide and topically administered insecticides by way of back and face rubbers or dust bags they must walk under to get to water or mineral (see UK Extension Publication ENT-11: Insect Control on Beef Cattle). Removal of fly breeding grounds and the use of feed additives will decrease the number of flies. Provide shade to protect from UV rays. Clean drinking water (instead of stagnant pond water) is critical because intake is greater with clean water and this helps provide plenty of fluid in the eye, especially in dry, dusty, and/or windy conditions. The precorneal tear film is essential in eye defense mechanisms as tears wash away pathogens by mechanical flushing and tear proteins are an important part of protective mechanisms. 3. Minimize the concentration of M. bovis [and M. bovoculi]-Vaccination may prove beneficial, depending on the strain of bacteria involved. Immediate detection and isolation of affected animals followed by effective treatment with long-acting antibiotics will shorten the period of corneal ulceration and speed healing time. Perhaps most importantly, treatment will reduce the duration of the carrier state when recurrence and transmission most often occur. Active cases of pinkeye with excessive tearing atcontinued on page C42

Prairie Fare: Eat smart on the run By Julie Garden-Robinson, Food and Nutrition Specialist, NDSU Extension Service

Trader’s Dispatch, October 2012 — Page C41

• Steel Modular Bridges For Sale • • Steel Bridge Beams •

Delivery Available. and ring the dinner bell. For more meal “Don’t spoil your appetite. We’re having ideas, visit http://www.ndsu.edu/eatsmart. dinner in about 20 minutes,” I said to my Contact Mark at Bauer & Buck Construction Also check out the Prairie Fare blog at 14-year-old daughter the other day when I (406) 880-5473 http://www.prairiefare.areavoices.com. returned home from work. Top this homemade pizza with your “I’m hungry right now!” she exclaimed favorite veggies to ramp up the nutrition. as she ate a meal-sized snack that she prepared in our microwave oven. I wasn’t going to dispute the issue. Growing teens need plenty of food, and she ate a second course later. I did, however, think about how to expedite our meal preparation. 1 refrigerated pizza crust, 12-inch diSome days you can’t get the food on the ameter table fast enough. On those days, consider 3/4 c. canned pizza sauce “speed scratch” cooking methods when 1 small onion, sliced time is short and your family members are 1/2 small green pepper, thinly sliced sitting at the table with their knives and 1 c. mushrooms, fresh, sliced forks in hand. 1 c. (about 4 ounces) mozzarella cheese, Speed scratch is a term used when you part-skim milk, shredded Get an early start on your seed cleaning. combine ready-to-use fresh foods (such as Preheat oven to 450 F. Place crust on We come directly to the farm. salad in a bag) with packaged foods (such ungreased pizza pan or baking sheet. Top We clean out after every job. as taco kits). with sauce and vegetables. Sprinkle with We also size barley. Some foods such as pasta and couscous cheese. Bake until cheese melts and vegcook in minutes. All you need to do is add Call now for an appointment etables are tender, about 15 minutes. some spaghetti sauce, a side salad and Makes four servings. Each serving has 1-800-626-7932 some fruit, and you have a healthful meal 410 calories, 11 grams (g) of fat, 20 g of William D. Wipf (406) 781-3036 in short order. protein, 59 g of carbohydrate, 4 g of fiber Ray Morken Jr. (701) 444-2201 or (701) 770-2201 If you are in a rush, shop the saland 750 milligrams of sodium. ad bar vegetables for presliced mushrooms, broccoli and cauliflower florets T or chopped onions to be used Pric he Be es A st in stir-fry or soup. Or open a rou nd! jar of salsa and use it as an instant cooking sauce with chicken, ground beef or pork Come see us today for great deals on our garden sheds, garages & gazebos. chops. Here are some other ingredient ideas to get food on the table fast, but be sure to read and compare the Nutrition Facts labels. Some readymade foods can be much higher in sodium than their homemade counterparts. • Prewashed, precut vegetables • Prepackaged stir-fry veggies Garage • Frozen pasta with veg12x16 Hi-Sid 24x24 2-Car e Barn with 2 9 6 ,4 0 1 $ Y etables windows.. $ L N O . . d lle a st 3019 in rs doo $146/month • Pasta salad mixes, which Windows and require oil or mayonnaise to Call us today for prices on Pole Barns be added • Prepared spaghetti sauce Visit us online at office in jars or cans www.montanashedcenter.com Summer • Pre-chopped garlic in Special jars mobile STOP • Boneless, skinless chickpaying rent for storage. 4930 10th Ave. South en breasts or presliced stirfry meats Great Falls, MT RENT-TO-OWN • Frozen bread dough one of our buildings. Office Hours: • Pizza crust mix or readyto-use crusts Monday - Friday 8-5, NO CREDIT CHECK!! Cost is a major factor Saturday 9-2, Closed Sunday in food selection for many 12x26 Log Cabin with Loft people. Even if you choose Insulated and wired..................... $16,499 “speed scratch” foods, which can cost a little more, you still will spend less money than if you ate at a restauShipping rant. Shared meals don’t anywhere in MT, have to be elaborate. If your ND, and WY. day leaves you frazzled, but your budget tells you to eat Free shipping at home, simplify your cookwithin 20 miles of ing style. Make half your 12-ft. Octago Great Falls, MT plate fruits and vegetables n Vinyl Gaz ebo with flo screen kit, a by serving salad or fruit on or, nd cupola. Was $6295. N the side to round out your ow ONLY....... ......... $599 quick meals. 5 Try some speed scratch 9 4 6 1 $ NLY • Display lots in Great Falls, Helena, items, use your leftovers op............. O 8 Chicken Co x 6 th n o as the basis of new meals, $84/m Billings, Glendive and Sidney • divide up the kitchen duties

Speed Scratch Homemade Pizza

M & R CUSTOM SEED CLEANING

Rocky Mountain Outdoor Structures LLC

406-727-2425 406-750-1147

Trader’s Dispatch, October 2012 — Page C42

TRUCK FOR SALE

1959 International 2-ton truck, new tires, new brakes, new hydraulic pump, Big 6, new transmission, 18-ft. box, wood bed. Call 406-562-3352, Augusta, MT

ATV FOR SALE Polaris 500 HO winch, plow, bags, front rack, double gun rack, hand/thumb warmer, extra fuel tank. Extremely Low Miles!! Phone 406-899-7609

Cab Glass and Seals for agricultural and industrial applications

CASCADE MACHINE & SUPPLY 401 4th Avenue South • Great Falls, MT 59405 406-453-8100 or 1-877-453-0166 FAX: 406-453-1127

It’s the season.....

Cattle breeding techniques

By Carl Dahlen, NDSU Extension Beef Cattle Specialist the goal would be to develop a perpetual As we make progress in the field of anisemen supply via recipient bulls. mal breeding and selection, many “new” • Recipient bulls either need to be technologies surface. Visual appraisal was immature or go through chemotherapy complemented with performance records, to eliminate their own spermatogonial expected progeny differences, ultrasound stem cells. Once transferred, semen from evaluation of carcass traits and, in recent both the donor and the recipient will be times, genetic marker evaluation of ecoproduced in the recipient. In sheep and nomically important traits. goats, only 7 to 10 percent of offspring While no single method along the confrom recipient male breedings are from tinuum seems very far from the next, when the donor male. one extreme is compared with the other, These issues and others certainly would the progression of tools is quite remarkneed to be overcome for the technique to able. But what else does the future have have large-scale applicability. However, if in store for our industry? the technique is optimized and available Several researchers have evaluated a commercially, the face of cattle breeding process called male germ cell transplancould change dramatically: tation. The concept of their work is that • Decisions about the type of breeding transferring cells (specifically spermatosystem implemented would include a cost/ gonial stem cells) from the testis of a benefit analysis among natural service donor male into the testis of a recipient bulls, artificial insemination and recipient male could result in the recipient producbulls producing semen from genetically ing the donor male’s sperm. The donor superior donors. sperm would continue to reproduce in the Production systems that do not allow recipient male, and subsequent breeding of gathering of cattle for artificial insemithe recipient male to a female would result nation (limitations in facilities, labor or in calves that are the son or daughter of simply a function of expansive grazing) the donor male. would be able to have the highest-quality The steps of the technique include isogenetics available via recipient bulls. lating the spermatogonial stem cells from Climates that are inhospitable to the the donor animal, preparing the recipient point where bos taurus bulls could not animal, using ultrasound guidance to survive would be able to raise crossbred transfer donor cells into the testicles of calves by using bos indicus recipient bulls the recipient, allowing the donor cells to carrying bos taurus semen. proliferate in the recipient, and then matWhether the process ever will become ing the recipient to females to produce mainstream is something we can’t necesoffspring from the donor. sarily predict. Transferring embryos from This technique has been proven on a genetically superior donor cows to recipiresearch level but has experienced several issues: ent females is certainly something that was • Immature bulls have greater concenaccepted in the cattle industry. However, trations of spermatogonial stem cells comcost of technology often limits its use. In pared with mature bulls. This highlights a addition, the term “stem cell” brings in potential limitation to using mature bulls controversy that may make cattlemen shy that are of high accuracy as donors. away from using recipient bulls. • If high-accuracy sires are to be utiRegardless of the actual future applicalized, the harvest of testicular tissue may tion of the process, just remember this picharm their own reproductive abilities. In ture: recipient herd sires on your operation this instance, stem cells would be colcarrying semen from virtually any bull in lected and the donor bull may not be the world. Only the future will tell what capable of producing additional semen. happens with our industry, but until then, This would be a short-term issue because it doesn’t hurt to imagine the possibilities.

Fast facts on pinkeye for producers continued from page c40

Get your off-road bike today. While they last!!!

USED MOTORCYCLES

2008 Honda CRF450R competition bike, 4-stroke, liquid cooled........................................... $3995

USED 4 WHEELERS & RANGERS

2-2012 Honda Rancher 420 4x4, low hours. Each...................................................................... $5317 2009 Honda Rimcon 680 4x4, automatic............................................................... $4100 2008 Yamaha Raptor 250 sport quad, 2WD, 4-stroke, 5 speed manual, electric start................ $2485 2008 Yamaha Big Bear 250 2WD, 4-stroke, electric start, shaft drive........................................ $2295 WE TAKE TRADES - FINANCING AVAILABLE

Yamaha — Honda — Polaris

Pure Bliss Cycle Sales

Hours: Monday-Friday 8:30 a.m. to 5:30 p.m. Saturday 9:00 a.m. to 1:30 p.m. Phone (406) 278-7583 — 609 So. Main, Conrad, MT

tract flies that spread the bacteria so topical application of a fly repellant to the face will help reduce vector spread. Does vaccination work? Many different commercial vaccines against Moraxella bovis such as Piliguard, Vision 20/20, Alpha 7/MB-1, I-Site XP, Maxi/Guard, Pinkeye Shield, Ocuguard and SolidBac are marketed for pinkeye prevention; due to strain differences, these may or may not be useful. Of 123 clinical trials, only 48 trials reported significant protection from commercial vaccines. Therefore, it is unlikely that vaccination is the solution to all pinkeye problems although it may reduce the overall incidence of disease. When commercial vaccines are not effective, some companies offer “autogenous bacterins” which are vaccines made from bacteria cultured from pinkeye cases off of a certain farm. All cultures must be taken early in the course of disease; preferably when the eye is just beginning to tear excessively and before any medications are used. A recent clinical trial of these “homemade vaccines” (autogenous M. bovis vaccines) concluded these are often ineffective in controlling naturally oc-

curring pinkeye. Failure of the vaccine to present the “correct” M. bovis antigen may make the vaccine ineffective or induce a nonprotective response. However, there are reports of autogenous vaccine success but they cannot be considered consistently effective. Summary: Pinkeye is one of the most common diseases of cattle and is of major economic importance in Kentucky. The keys to prevention and control of an outbreak are maximizing the herd’s immune status, minimizing the concentration of the Moraxella bacteria, and maintaining as irritant-free environment as possible. Treatment decisions are influenced by numerous factors such as effectiveness of the drug selected, cost, labor availability, withholding times, facilities, and availability of veterinary support. Vaccines are not consistently effective in disease prevention and cannot be completely relied upon to prevent pinkeye. The best strategy of treatment, prevention and control of pinkeye for a particular herd is dependent on a thorough analysis of the current situation on that individual farm and is best accomplished through the local veterinarian.

The good, the bad, and the ugly By WSU Extension

Trader’s Dispatch, October 2012 — Page C43

SEEDING EQUIPMENT FOR SALE Concord 4812 48-ft. air drill, 3000 cart, diesel fan.

Washington did not contend with unprecDon’t be fooled by the recent stretch John Deere 9350 30-ft. drills edented heat, temperatures were consistently of pleasant late-summer weather. Most of Call (406) 855-4596, Huntley, Montana very warm, with highs in the upper 80s to Washington’s 2012 summer weather featured low 100s for several weeks. WSU Prosser set conditions that ranged from bad to downright monthly records for the warmest daily low ugly. From the severe storms in mid-July temperature (69.1˚F on August 15), and the to the raging wildfires and parching heat in warmest daily average temperature (83.8˚F August, a great diversity of weather concerns on August 6). The first day with below averepitomized the summer season. 1995 Freightliner FL70 cab age temperatures did not occur until the 22. “Although events such as the severe & chassis, 8.3L Cummins, Hot weather during early and mid August weather outbreak of July 20 were very Allison automatic transtransitioned to more seasonal weather durdamaging to certain sectors of Washington mission, weak. ing the latter part of the month. Highs were agriculture, many growers managed to Phone 406-799-6923 generally in the 80s, while lows dropped into effectively weather the difficulties of the the 40s and 50s, as pleasantly warm days season,” said AgWeatherNet director Gerrit gave way to clear, cool nights. Hoogenboom. “Fortunately, many fields and “This year certainly reflects the recent orchards have good crop quality, and numertrend of cool, wet conditions early in the ous harvests are producing normal yields.” summer transitioning to warm, dry condiEach month of the season featured a tions by later in the summer,” said Loyd. unique character, thanks to a variety of Farm land / hay ground to lease For more information on Washington’s weather events. “The story of Washington’s summer weather, as well as other weather summer is one of feast and famine,” said Agin North Central Montana. information, please see the Summer Weather WeatherNet meteorologist Nic Loyd. “June’s Review on the AgWeatherNet website, www. cool and wet weather stands in stark contrast weather.wsu.edu, located under the News to the hot and dry conditions observed in link. August. Although the overall summer temperatures were near average, there was a lot of action going on at any given time.” Tired of moving your GPS guidance and steering system from vehicle to vehicle? Below normal temperatures Are you waiting for the prices to go down to get your first guidance and steering system? and above normal rainfall characterized June, as daytime high temperatures were generally three degrees or more below average. PullEZ-Guide 250 with EZ-Steer man reached only 48 degrees Bundle for a high on June 9, while Ritzville dropped to a frosty 31.7 degrees on the June 15. Includes: Washington State University’s EZ-Guide 250 Guidance (WSU) research center in EZ-Steer Assisted Steering Prosser experienced its secAg15 High Performance Antenna ond wettest June on record, while a weather station in Steering and Battery Power Cables south-central Washington Support from Triangle Ag-Services experienced an all-time daily record rainfall of nearly one and a half inches on June 4. The weather warmed significantly during July, and was slightly above average for the month. However, the Accepting most notable feature of the Orders Now! month was the severe weather 406-622-3887 outbreak of July 20, which ended a weeklong stretch of humid weather and daily thunderstorms. Some areas received three-quarters of an inch of rain in only 15 minutes. Isolated areas received Limited Time Includes all cables devastating crop losses of Limited Quantities Bracket not included near 100 percent due to hail damage. There was also a heat wave early in the month that sent temperatures soarRetail Price: $5561 ing to as high as 107 degrees in central Washington. July 8 Bundle Discount: - $1000 was a particularly interesting Mail-In Rebate: - $350 day that featured both extreme (we send in the rebate info for you) heat and thunderstorms. Parts of the Yakima Valley received A G - S E R V I C E S over a quarter-inch of rain PO Box 1476 : 2705 Front Street following afternoon highs in Fort Benton, MT 59442 the 100s. Some areas expetriangleag.com 406-622-3887 rienced the hottest rainy day on record. In August, dry weather Sign up to win a FREE dominated the state for the October 2, 2012 GreenSeeker entire month, as fires and Handheld Crop Sensor smoke-filled skies plagued the 10:30am to 3pm region. Many areas continue 2705 Front Street to experience dry streaks that Three have surpassed 50 days at the chances to win! Fort Benton, MT end of August, with little relief in sight. Although eastern

CAB & CHASSIS FOR SALE

WANTED

Call 406-899-6736

NO S E S U C X E

No Excuses

TRIANGLE

Don’t forget

OPEN HOUSE

$4211

Trader’s Dispatch, October 2012 — Page C44

John Deere air drill

NICE SHAPE

• 787 cart

• 41-ft.

Buy or Lease To Own

Fertilizer Spreaders

SB4000

• 12” spacing

$6614/yr - oac 2655 Bale Processors

• 1600 gallon • 90-ft. boom/windcones • 480 tires • Adjustable axle • Bottom fill

Buy or Lease To Own

One Holdover LEFT!

$6872/yr - oac

• Liberty model • Mild steel • Tandem axle • Dual spinners Buy or Lease To Own

$6872/yr - oac

Rock picker

DEMO Unit!

LAST ONE!

• More flails

• More slug bars

• More rotor speed

Feed More Efficiently!

Buy or Lease To Own

• Model RR250 • Hydraulic drive

$4586/yr - oac

• 1.75 cubic yard • Low angle rake

Buy or Lease To Own

Heavy Harrow

$3247/yr-oac

• 49 hours

5000EX Grain Vac

Buy or Lease To Own

Rental Return!

• 10” auger • Complete hose package

Big Savings

2700 Grain Vacs Buy or Lease To Own

Just Traded • Hydraulic boom lift • Hydraulic swivel

• Hose package

$4456/yr - oac

Used Ultimate

Farmer To Farmer

I was referred to Frieling’s by a good friend. We farm 700 miles from Great Falls, in southeastern Idaho. My friend said there was no one better to work with then Frieling’s and I found that to be very true. Not only was the purchase price of the sprayer very reasonable, but also the accommodation to finance at favorable terms and delivery. I could not have been more pleased. The item was delivered timely and everyone I dealt with were so friendly and professional. I do not hesitate to recommend Frieling’s to anyone. Mark Andresen, Preston, ID Owner of used Flexicoil 67 XLT sprayer

$2782/yr - oac

USED Grain Trailer

• Good tires

• Good brakes

• Good tarp

Sale Price $12,500

$2411/yr - oac

7614 Grain Vac

NEW

Buy or Lease To Own

• Float tires

Just Traded!

• 50-ft. width • Spring pressure kit • 9/16” tines/Hydraulic tine adjustment

• 5000 bushel per hour

• 26 EFI • 48” deck • Electric dump

Drive Over Conveyor 1 Only Big Demo Discounts!

Buy or Lease To Own

$2968/year - oac

New

5200EX

Well Maintained • 1500 gallon • 100-ft. boom • Windscreens • Raven 450 controller

$6829/yr - oac

3400 Old Havre Highway – Great Falls, MT

• 10” auger, hydraulic fold • Complete hose package

Buy or Lease To Own Only

Buy or Lease To Own

1-888-453-2924 Danel Frieling

Keith Lippert, cell 799-1494

$4456/yr - oac

Check us out on the web at www.frielingsonline.com

Trader’s Dispatch, October 2012 — Page C45

Mike

David

(208) 681-6009 – (208) 524-2310 – (661) 310-8822 www.worldequipmentllc.com MAJORITY OF EQUIPMENT WAS MUNICIPALITY OWNED 1997 Ford F350

Ford TW-15

160,000 miles*, automatic transmission, air conditioning, crane, tool boxes, compressor

4890 hours*, 128 hp

$13,900

$8950 obo

1991 Ford F800

1983 Grove RT518

95,000 miles*, automatic, air conditioning

original 621 hours*, Detroit diesel, 60-ft. height, 18-20 ton lift, 4 outriggers, air brakes

$9150

$44,500

Ford 555D

1996 International 4700 DT466

only 2000 hours*, 2WD, extendahoe, 2 stick controls

101,000 miles*, auto transmission, spray tar tank, A/C, air gate, air seat, air brakes, tow package.

$9900

$18,500

2002 Sterling SC800 Elgin Crosswind Cummins 115 hp turbo diesel, pick up head, 2 side broom, 8 yard debris hopper, spray water system, central rocker switches, instrument controls, dual steering controls, auto, AC, cruise

Multiquip Deyno 275 KVA Gen Set

2750 hours*, Komatsu Hino Turbo diesel, self contained, 3 axles, 480/240/120, 1/2/3 phase

$22,900

$19,950

1997 Ford F800

90,000 miles*, automatic, air conditioning

1989 GMC 7000 automatic, air conditioning, air brakes, 3200 lb crane, PTO, 160 CFM compressor

$9900 2002 GMC 3500

$12,500 1991 Ford F800

82,000 miles*, diesel, automatic, 6 yard dump, MT-653 tow package, air brakes, air conditioning, air gate, 614 hours* on PTO

$9500

Duramax motor, automatic, air conditioning, lift gate, 14-ft. bed

$10,900

2002 Bobcat 185 S

3075 hours*, hi flow, 1850 lb. load capacity

2001 Toro 580D 4500 hours*, 85 hp Mitsubishi turbo diesel, 3 decks, will work with 1 or 2 decks, 16-ft. wide, will do up to 10 acres/hour.

$8900 1999 Ford F800 Chipper Truck 98,000 miles*, 55-60-ft. height, Cummins 24 valve diesel, 6 speed transmission, new clutch

$22,500

2006 New Holland LV80 3100 hours*, Cummins turbo diesel

$14,900 2002 Caterpillar Eagle Picher RT60 3500 hours*, Perkins diesel, 3 speed Power Shift, 4WD, 6000 lb load, side shift, 179” height

NEW FINANCE OPTIONS FOR LOWER CREDIT SCORES! l ai m e o or l f ide iece l a v p C & h ac e r fo

$14,900

$21,500

Contact Mike to customize a finance plan to fit your equipment needs. Mike can also help you with your shipping needs, he can ship anything, anywhere! Flexible Finance options available with seasonal payments, deferred payment plans, and no money down payment options with approved credit. * 50 month credit terms available on all units regardless of asset age.

*Hours and miles are advertised as shown on the hours/speedometer. Having no way of verifying true accuracy. All vehicles will be sold through Ram Tire Co. Inc., a licensed California motor dealer.

WE DIR CAN S ECT HIP YOU LY TO !

Trader’s Dispatch, October 2012 — Page C46

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT ADS IS NOVEMBER 2.

Lewistown Honda Sales - Parts - Service

We are the place where ALL ROADS come to.

Located in the center of Montana.

We ship parts & accessories daily

visit our web site: lewistownhonda.com 302 Truck Bypass, Lewistown, MT 59457

406-538-9435 Toll Free 1-800-823-0226

Agriculture in a growing world

MONTANA MADE *Hand-Constructed

*Proprietary Aluminum Design *Superior Strength *Smooth Interior Walls & Floor *3-Piece End Doors With Metering Gate

*Removeable Steel Tarp Bows *Unique Understructure

(allows steel long sills for strength, rigidity, & improved hoist operation)

The World’s Finest Grain Body ORDER TODAY!

ask your tax advisor about the

tax benefits of receiving your product in 2012

800.327.3349

Frazer’s Oil, Inc. Galata, MT 406-432-2321

By Bill Lombardi, Powell County High School Just how will agriculture keep up with our growing world? That is a great question to ponder, one which students from Powell County High School were asked to reflect upon last spring. They were asked to write about agriculture in a growing world by their Agriculture and English teachers. Daniel Beck from Avon Montana put his efforts into exploring how transportation and infrastructure in developing countries contributes to agricultural output and the well-being of rural people. When I caught up with Daniel it was a hot summer day in the Little Black Foot Valley of Western Montana. It was a great day for putting up hay. For the Powell County High School junior and Ag-Ed / FFA member Daniel Beck mid-summer is the time for working together on the family ranch putting up loose hay. One of his many jobs is running the bull rake during haying on the fifth generation family ranch. It was also a great day to reflect on winning the National essay contest “Agriculture in a Growing World” sponsored by the American Farm Bureau Foundation. The Agriculture in a Growing World essay contest is a national competition, open to students in grades 9-12. Daniel’s first place essay earned him a $500 prize and a $1000 grant for his school to further agriculture education. The grants were made possible by Nutrients for life. The agriculture education classes at PCHS teamed up with Mr. Frank Spring from the English department to bring an agricultural literacy project to their school. The basis of the project was reading the book “The Man Who Fed The World” by Leon Hesser and then reflecting on the reading and writing an essay. This book brings to life the story of Norman Borlaug. Dr. Borlaug was an agricultural scientist who changed the course of history and saved millions of lives through his research. Norman grew up a farm boy in Iowa and rose up to be considered one of the 100 most influential people in the world during the twenty century. He was awarded the Noble Peace prize in 1970, his advice and insight in agriculture and feeding a growing world was sought by the leaders of many nations. PCHS English teacher Mr. Frank Spring and agriculture teacher Mr. Bill Lombardi recognized the value of teaching students about this great American and World hero. They ask their students to ponder and then write about the enormous task of feeding the ever-growing world populations. Daniel Beck responded to this challenge with his award-winning essay. Today there is a great calling for young leaders in agriculture to rise up and contribute to the feeding of a growing population, which is expected to reach 9 billion people by the year 2050. Daniel Beck is just such a leader, he is currently serving as the Deer Lodge FFA chapter secretary, he is actively involved in our school and community. The American Farm Bureau Foundation has had the fore cite to develop curriculum and motivate young leaders to follow in the footsteps of Norman Borlaug. ##### A church preschool teacher was watching her class of fouryear-olds enjoying free time for art. One little girl seemed especially engrossed in her drawing, so the teacher walked over to take a closer look. “I’m drawing a picture of God,” said Callie. “Oh, honey, no one knows what God looks like,” said the teacher. “Well, they will when I’m done!” replied Callie.

Effects of injectable vitamin products

By Carl Dahlen, NDSU Extension Beef Cattle Specialist, and Bryan Neville, Central Grassland Research Extension Center Animal Scientist Have you ever had a group of calves that was born very weak and prone to illness? Inadequate vitamin intake in gestating cows may result in calves that are born weak and with poor immunity. The immune system benefits of vitamins A, D and E, as well as the antioxidant properties of selenium, have the potential to improve overall animal health and productivity significantly. The purpose of this study was to determine the effectiveness of vitamin A-D-E or Bo-Se injection on raising serum fat-soluble vitamin and selenium concentrations of newborn calves in the first 48 hours after treatment. To conduct this research, we used 40 young beef calves (3 to 20 days of age) born to first-calf heifers at the Central Grasslands Research Extension Center near Streeter, North Dakota Calves were blocked by age and sex, then randomly assigned to treatments in a 2•2 factorial design, with factors being 1) administration or not of 4 mL Bo-Se [Intervet; selenium (1 mg/mL) and vitamin E (50 mg/mL)], and 2) administration or not of 5 mL of VITAL EAD [Stuart Products; vitamin E (as d-alpha-tocopherol; 300 I.U.), vitamin A (as retinyl-palmitate; 100,000 I.U.) and vitamin D (10,000 I.U.)]. 3 Whole blood samples were obtained via jugular venipuncture from all calves just prior to administration of treatments. Calves were placed on a portable digital scale to determine body weight at the time of treatment administration. Fortyeight hours after treatment, a sample of whole blood was collected again. Cow-calf pairs were maintained in a lot and fed once daily. The diet consisted of 20 percent alfalfa/grass hay, 70 percent corn silage, 6 percent barley and 4 percent liquid supplement. In addition, cows had access to free-choice loose mineral. Twenty-three days after treatment administration, calves were weighed and cow-calf pairs were moved to pasture. Body weight gain was calculated by subtracting the weight at the start of the trial from the pasture turnout weight. Blood samples were shipped to the Iowa State University Diagnostic Laboratory for analysis of selenium, vitamin A and vitamin E. Calves treated with BoSe had greater concentrations of selenium 48 hours after treatment, compared with calves not given BoSe (Table 1). In addition, calves treated with VITALEAD had greater concentrations of vitamin A and vitamin E on day two, compared with calves not given VITAL-EAD (Table 2). No interactions (P > 0.10) were present among BoSe and VITAL-EAD factors for serum concentrations of selenium, vitamin A or vitamin E.

Trader’s Dispatch, October 2012 — Page C47

USED EQUIPMENT

Miscellaneous

Haying Equipment

Valmar 240 40-ft. engine drive pull type granular spreader.....$5550 8 ton fertilizer spreader, engine drive. Available for sale or rent...$7900 Shaver bucket mount post pounder....................................... $599 Davis 185 3-pt. backhoe attachment................................. $3100

John Deere 4 row 3-point corn planter..............................$1895 Melroe 23-ft. cultivator with harrows, hydraulic wing lift..............$3999

3 bottom rollover plow..............$895 12-ft. offset disc.......................$850

Tractors

International 1256 2WD, cab, loader, bale spear and duals....... $13,250

Hesston 565A round baler, twine only. Very low bale count..$8500 2007 Hesston 5556A round baler, twine only, 4900 bales...$29,900 Hesston 856A round baler, 10,000 bales..............................$13,900 1989 Hesston 560 round baler, 1000 PTO, new belts........$3000 2002 John Deere 567 round baler, twine/net, mega wide pickup...... .............. Just In - Call for price Case IH RS561 round baler..$10,500 1994 Case IH 8465 round baler, fully automatic...........$5900.....$6900 Case IH 8465 5x6 round baler, dual twine arm, hydraulic pickup lift... .........................................$5800 New Holland 660 round baler, moisture tester, extra parts.......$5500

Misc. Irrigation

T&L 6 tower pivot, 3 years old, never used.................................. CALL Natural gas engines, pumps....CALL Additional used mainline, call us

John Deere 3020 2WD, 3 point, 540 PTO, 2 remotes, 3289 hours.$8000 Deutz-Allis DT 7.10 2WD with cab and dual PTO................$13,900

Hydra-Dec Round Bale Bed * Synchronized Telescoping Arms * Extendable Arms * Joy Stick Control

Hesston 5456A round baler, mesh/ twine..............................$28,999

New Holland 2000 big square baler..............................$13,900 New Holland 1425 self-propelled baler..................................$8450 New Holland 1045 2 wide self propelled balewagon, 6 cyl gas engine..............................$4599 Hesston 6600 swather with 14-ft. hay header, conditioner....$6900

Truck

1994 International single axle tractor with Navistar diesel engine and 9-speed......................$6900 Replacement Engines & Power Equipment

Rainbow Irrigation & Equipment, Inc. Phone: (406) 357-2211 - Email: rainbowsales@mtintouch.net Website: www.visitrainbow.com - Address: Box 700 Chinook, Montana

3.9% Financing for up to 60 months On all New Large Square and Round Balers – OAC

NEW - IN STOCK Massey-Ferguson Hesston 2170 3x4 square baler, tandem axle

The average daily gain of calves from treatment until pasture turnout was affected by an interaction among BoSe and VITAL-EAD. Calves given either Bo-Se (1.66 lb/d) or VITAL-EAD (1.64 lb/d) had greater average daily gain compared with calves given both products (1.17 lb/d), while calves that did not receive either product (1.42 lb/d) were intermediate. This research showed that administration of VITAL-EAD increased the serum concentration of vitamin A and vitamin E in young beef calves, whereas Bo-Se increased concentrations of selenium. Future research efforts need to explore the duration of the elevated serum vitamin status as well as potential health benefits this may bring to calves with inadequate vitamin status.

NEW - IN STOCK Hesston 2856A round balers

5x6 bale, net or twine

IN STOCK NEW IN STOCK Massey-Ferguson Hesston WR9740 16-ft. 9126 auger header

NEW Massey-Ferguson 2680 80 hp, FWA, cab and loader.

Trader’s Dispatch, October 2012 — Page C48

TRACTOR FOR SALE

Ford 7710, FWA, 7410 loader with bale spear, 2936 hours.................................................................. $23,000 Call 406-925-1895 for more information

CUSTOM SWATHING •Newer MacDon machines •CRP, grain and hay •Canola •North Central Montana

Call 406-899-6736

1957 Diamond T M52 6x6 snowplow truck, Hercules all fuel-turbo, 180 hp, 5 speed, 2 speed, T-case, 11-ft. 2-way plow, 4 yard E-2020 Hi-way sander, 22,222 miles.........$11,500 Phone (406) 827-4656 Thompson Falls, Montana

PLOW TRUCK FOR SALE

ATV FOR SALE

2007 Polaris Sportsman 800 Twin ATV deluxe package includes: wheels, winch, windshield, thumb extension, trailer hitch, only 405 miles...................................................................... $6400 Phone 406-452-0300

TRACTORS FOR SALE

2008 John Deere 7330 4100 hours, automatic PowrQuad transmission, 150 hp, left hand reverser, 3 SCV’s, new rear rubber. New SL loader, bucket, grapple, 3rd function valve. Very nice.........................................$77,500

2004 John Deere 7520 with 6100 hours, automatic PowrQuad transmission, 3 SCV’s with John Deere 741 loader with bucket, 150 hp, clean tractor...........................................$68,000

2006 John Deere 7820 5400 hours, 175 hp, automatic PowrQuad transmission, left hand reverser, Green Star ready, duals. Rebuilt transmission with warranty. ................ $89,000

2009 John Deere 7230 4000 hrs, auto PowrQuad trans, 131 hp, 3 SCV’s, new tires, excellent condition... ...............................................$63,500

2008 Case IH 115 Maxxum 115 hp, 3 SCV’s, front weights, 540 and 1000 PTO, 24 speed powershift with left hand reverser, 2500 hours, excellent condition.................................$48,000

2009 John Deere 7130 3600 hrs, 121 hp, auto PowrQuad trans, 2 SCV’s, R/P long axles, excellent condition...... ...............................................$57,000

Financing Available

Loaders Available

Steinhatchee Equipment Co. Inc. 406-777-1701 or 239-0942

www.steinhatcheeinc.com e-mail: nelsen889@aol.com

Chance Peterson, Brett Monroe, Will Boumans and Brett Stoltz all of Valier, show how the pig wrestling is done at the Marias Fair in Shelby, Montana in late August.

Prepare drought-stressed trees for winter

Trader’s Dispatch, October 2012 — Page C49

DIESEL

By NDSU Extension Service This past year has been one of the driest on record. The effect of the drought on crops and livestock is extensive and has been well publicized, but drought conditions also impact trees. What can you do now to help assure their survival now and through the coming winter? “The simplest answer, of course, is to water trees now and keep them well-hydrated right until the soil freezes,” says Joe Zeleznik, North Dakota State University (NDSU) Extension Service forestry specialist. “Tree roots continue growing as long as the soil temperature is above 40 degrees. Therefore, getting water to the trees now is critical for helping them cope with the bitter cold winter temperatures to come. Focus on those trees that are most susceptible to winter injury, which are conifers and newly transplanted trees.” Tree roots are deeper than those of lawns and are more widespread than many homeowners realize. The watering should be slow, deep and extensive (edge of the drip lines of the trees and beyond). Check to be sure the water has penetrated to a depth of at least 6 to 9 inches. One rule of thumb is to use 10 gallons of water for each inch of tree diameter (caliper), according to NDSU Extension Service horticulturists Ron Smith and Tom Kalb. They advise watering once per week using nonsaline water and continue watering as long as dry weather persists. Using water with a high salt content can stress the trees even further and cause more harm than good. Adding mulch around trees also can help keep moisture in the soil and protect the trees from the drastic temperature swings that especially come in February and March. Place snow fences or other structures in locations that will help capture and deposit snow around the trees. For prize specimens, make sure they’re also fenced in and protected from rabbits and other animals that might climb on top of the snow banks to eat the tender shoots. “The drought has been tough on our trees,” Zeleznik says. “Nevertheless, there is still something we can do about it now. Water your trees thoroughly now and through the fall until freeze-up. Doing so will help minimize the stress and damage that winter can cause.”

ENGINE OVERHAULS In-Frame Specials * ISX Cummins.....$14,000 * 3406B CAT.....$7995 * 3406E CAT.....$9500 * N-14 Cummins..$9995 * 60 Series Detroit..$9500

New & Used Parts * turbos * Cranks * Cams & Cam Kits * Cylinder Heads * Air Compressors * Injectors * Connecting Rods * Overhaul Kits

KOMATSU Off-Highway Engine Overhaul Specialists Call Us With Your Needs

* Line Bore * Deck Block * Counter Bore * Rod Rebuilt & Bushed * Crank Polish & Mag * Heads Rebuilt * All New Valve Train Call Us First!

Diesel Power Parts and Machine

543-7855

If it burns diesel, BIG or small, WE HAVE the cure for them all!

3750 HWY 200 E – E. Missoula, MT Visit us on the web at: www.dieselpowermissoula.com

New Ritchie waterers in stock!

Posi Lock

New Honda Replacement Engines Honda weed trimmer with 4-stroke gas engine. New Ezee-On pallet forks make your tractor do the work of a fork lift.

gear and bearing pullers in stock.

NEW GRADEMASTER BLADE New Tebben rotary cutters for 3-point mount, 5- & 6-ft. models in stock.

See our display of welding accessories & rod. We’re sure to have what you need.

New Honda 4 and 51/2 hp 2” pumps. In stock: 132 and 152 gpm water pumps, 220 gpm chemical pump. 3” pumps at 275 gpm also on hand.

Gysler - Melroe - Renn chisel plow parts We can ship to your farm or ranch

It’s dual blade configuration and side pans provide maximum advantages. For gravel road maintenance, the GRADEMASTER BLADE fills potholes that stay filled longer and virtually eliminates corrugating or washboarding on the road surface.

Made in U.S.A. Various sizes of storage cases available. Great for miscellaneous parts and fittings.

all-copper 20-ft. jumper cables. 4 gauge. Starting at............. $69.95

TIBER TRACTOR CO. Phone 406-759-5188

Chester, Montana

New Jari Monarch self-propelled sickle mowers with 36” or 44”. The floating sickle bar hugs the ground - glides over holes and bumps with ease and without hanging up - makes rough jobs easy on you. You can cut almost anywhere by guiding Jari with one hand. We stock Jari parts, will ship anywhere.

✧ Interstate batteries ✧ Fleetguard filters ✧ Roller chain ✧ Plastic fittings ✧ Grade #8 bolts

Trader’s Dispatch, October 2012 — Page C50

Old Cars Wanted

Looking to buy old cars, trucks and parts up to 1974. Call Wayne 406-214-5910 (cell) or 406-821-0300 (home)

ROUND BALER FOR SALE

2004 John Deere 567, twine, excellent condition, new sprockets & chains, always shedded until last year, good belts..........$14,000 obo Call Ben @ 406-546-7952, Saint Ignatius, MT

EQUIPMENT FOR SALE

1982 Freightliner tandem grain truck, Detroit diesel motor, steel box holds 650 bushel. Good tires and tarp................... $10,000 1973 Flying J 2-horse trailer, new axles............................. $1000 Melroe 903 8-bottom plow................................................... $1500 Cat dozer..............................................................................CALL Ford 8N tractor with loader.................................................... $450 Stealth openers, slightly used.................................................. $30 Call 406-397-3386, Hingham, MT

B & B Ag Supply Inc. Broadview, Montana

Full line of

products

BRET CONOVER, owner 406-667-2185 or 406-855-3011 (Bret) 406-694-8339 (Chad) 406-861-8922 (Craig)

Call for competitive pricing!!!

10” x 70-ft. & 10” x 80-ft. SA augers in stock!

SB 4000 sprayers in stock!

Grain auger, transfer augers, bin sweeps. 8” x 36-ft. and 8” x 41-ft. in stock!

K-State students chosen for prestigious wheat plant breeding fellowship

By Kansas State Research and Extension tion through plant breeding. Jared Crain and Sarah Battenfield, doc“Growing up in farming, you learn the toral candidates in genetics at Kansas State value of what it takes to plant, care for, and University (KSU) (http://www.k-state. harvest a crop, and I enjoy that every day is edu), are two of this year’s 14 fellows in different. What worked great one day may the prestigious Monsanto Beachell-Borlaug not work great the next,” he said. “AgriculInternational Scholars Program (MBBISP) ture research is exciting because, like farmfor 2013. ing, it requires working through a whole They are two of three new fellows in the set of unanswered questions, and using all program who call the United States home. kinds of methods, from math to chemistry Through the program, Crain will work to biology to answer those questions.” to improve productivity in wheat through Battenfield, a native of Hennessey, Oklaadvanced breeding tools. MBBISP will give homa, grew up working on her family’s him the opportunity to work with the global cattle and wheat farm in Hennessey and Lawheat breeding team at the International verne, Oklahoma every summer. She graduMaize and Wheat Improvement Center ated from Oklahoma State University with (CIMMYT) in Mexico. Crain’s career oba master’s degree in plant and soil sciences. jective is to develop sustainable methods to Her experience in agriculture, coupled with increase wheat production in order to meet inspiration by Dr. Norman Borlaug, instilled global demand. in her a desire to make an impact on food “It’s going to take all crops to feed the production through plant breeding. world, but wheat will have a huge op“Hearing stories of Dr. Borlaug helped portunity to make an impact because it is me develop a passion for breeding,” Batvery hardy and can grow in what are often tenfield said. “I would like to be a breeder marginal conditions,” Crain said. “My role that pushes the boundaries of maximum, in meeting global demand is developing on-farm attainable yield, doing my part to new, heartier and higher-yielding crops for improve the world food supply.” growers and developing new methods for Established in 2009, the fellowship proscientists to use in working toward food gram began in honor of two of the world’s production.” most pre-eminent rice and wheat breeders: “With increasing global populations, Drs. Henry Beachell and Norman Borlaug. we are at a critical time to increase crop Their lifelong work laid the foundation for production,” said Jesse Poland, K-State the tremendous increases in rice and wheat research geneticist who is helping guide production that continue to help feed the Crain’s work. “We are continually losing world today. MBBISP has provided 52 productive farmland and facing hotter and scholars from 21 different countries the opdryer climates than ever before. Increasing portunity to pursue their doctorate at leading crop yields is a real challenge and there is universities and to collaborate with research a big need for Ph.D. level plant breeders to institutions around the world. do so. It is very encouraging to see MonSandra Dunckel from Switzerland, ansanto take initiative to support training of other K-State doctoral candidate, received these students and exciting to see promising the distinction last year. Her research in young scientists like Jared getting into plant wheat breeding to combine elite wheat breeding.” varieties with favorable characteristics will Through the program, Battenfield will contribute to her career goal of improving research ways to improve yield and endwheat grown in developing countries. She use quality of wheat crops, with the goal to also works with Poland and CIMMYT. make improved wheat varieties available to “The MBBISP gives me the opportunity farmers in developing countries. MBBISP to work with distinguished wheat scienwill give her the opportunity to work with tists at KSU and in an international setting the global wheat breeding team at the Inthrough the collaboration with CIMMYT ternational Maize and Wheat Improvement while addressing the research questions I am Center (CIMMYT) in Mexico and apply interested in,” Dunckel said. “This sets the genomic selection to wheat germplasm from foundation for a career enabling me to conthe International Bread Wheat Screening tribute my share to the immense challenge Nursery (IBWSN). of feeding a growing world population.” “As a MBBISP scholar I get the oppor“Having three MBBISP scholars on camtunity to not only be an assistant at KSU, pus is a real honor as it is also an indication but also at CIMMYT working with what I of the respect others have for the graduate consider to be the best wheat program in education programs in plant breeding at Kthe world,” Battenfield said. “Having this State,” Fritz said. scholarship has changed my education into In 2009, Bhanu Kalia, who studied with a world class opportunity and has opened K-State’s Bikram Gill was awarded the potential to work around the world.” MPPISP Scholarship in the inaugural year She will be working under the guidance of the program. of Allan Fritz, K-State wheat breeder. As part of the company’s commitment to “World population is expected to increase sustainable agriculture, Monsanto pledged by more than 25 percent over the next 40 $10 million through the MBBISP to provide years, placing tremendous demands on our fellowship opportunities to individuals agricultural systems. We need to attract the seeking their Ph.D. in rice or wheat plant best and brightest to the agricultural scibreeding. Through the fellowship, Crain, ences in order to meet the challenges that lay Battenfield, and Dunckel will gain leaderahead,” Fritz said. “The MBBISP program ship skills, education and tools to positively attracts outstanding students, like Sarah, impact wheat farmers around the world and to the field of plant breeding and provides improve the future of agriculture. In addithem with a rich graduate experience that tion, the scholars will experience unique prepares them to be future leaders in interlearning experiences including: national agriculture.” • Scholar-developed applied research Crain, a native of Woodward County, programs that include experiential learning Oklahoma, grew up working on his family’s in both developed and developing countries cattle and winter wheat farm. He graduated • Participation in the World Food Prize from Oklahoma State University with a and Borlaug Dialogue in Des Moines, Iowa master’s degree in plant and soil sciences. • Opportunities to interact with leaders Growing up in agriculture instilled in Crain in government, research, academia, and a desire to make an impact on food producindustry

West Nile’s “super spreader”

The 2012 outbreak of West Nile virus, according to the U.S. Centers for Disease Control and Prevention, promises to be the largest since the disease was first detected in the United States 13 years ago. Since arriving in 1999 from Europe or Africa, the disease has spread to nearly every state and a growing body of evidence is pointing to the iconic American robin as the primary culprit for spreading the disease in the Northeastern and Midwestern U.S. “Robins are in the sweet spot,” explains Tony Goldberg, a University of Wisconsin (UW)-Madison infectious disease expert who has been running a National Science Foundationsupported study of West Nile transmission in the suburbs of Chicago for nearly a decade. “They are abundant, mosquitoes like to feed on them, and they happen to support virus infection better than other species.” Since 1999, the virus has since infected more than 30,000 people, mostly through the bites of infected mosquitoes. An opportunist, the virus infects a wide variety of host animals: dogs, cats, bats, horses, chipmunks, squirrels, rabbits and even crocodiles can acquire it. These animals are “dead-end hosts” and can’t transmit the virus, Goldberg notes, because West Nile virus only multiplies to high levels in birds. Birds are far and away the most frequent carriers, and the ubiquitous robin, a mainstay of suburban American lawns, cemeteries and golf courses, has now been identified in several studies, including one by Goldberg’s group, as the West Nile “super spreader.” In suburban Chicago, century-old backyard catch basins and gutters provide ideal habitat for West Nile’s primary insect vector, the Culex pipiens mosquito, also known as the northern house mosquito, which breeds in small standing pools or containers of water laced with organic matter. This year, the Culex mosquito is thriving because its breeding habits seem to be little affected by the drought. “If it is hot and dry, standing water has a chance to ferment so Culex mosquitoes have plenty of places to breed. We think this may be a very good year for West Nile transmission,” says Goldberg, a professor of pathobiological sciences at the UW-Madison School of Veterinary Medicine. Statistics from the U.S. Centers for Disease Control bear this out, showing more than 1,100 cases and 41 deaths attributed to West Nile through mid-August, the most serious outbreak since the disease made its U.S. debut in 1999. Goldberg and his colleagues have been prowling Chicago’s western suburbs, a hot spot for the disease, in an effort to accurately profile all the players and dynamics involved in its spread. The work involves trapping feeding mosquitoes and checking their blood meals to see what animals they’ve been feasting on. Isotopic analyses are also used to trace the mosquitoes to their exact breeding location, sometimes the very catch basins in which they hatched. In recent years, Goldberg’s group has turned its attention to West Nile’s bird hosts, and robins in particular. With the aid of tiny, temporary featherweight transmitters, the Wisconsin researchers prowl the suburban landscape, often at night, following the avian players in the West Nile drama. A key finding by Goldberg’s group is that the birds roost at night communally, in groups ranging from tens to thousands of individuals. “We’ve tracked them to their nighttime roosts, which are very impressive,” says Goldberg. “You can walk in at night, shine a flashlight, and they’re like apples on the trees.” The roosts seem to be ideal feeding grounds for Culex mosquitoes, which feed mostly at dawn and dusk. In work led by former UW-Madison post-doctoral researcher Gabriel L. Hamer, now of Texas A&M University, the feeding strategies of Culex mosquitoes and the spread of West Nile were tied directly to American robin abundance. “At least two groups, including ours, have concluded that robins account for a very high proportion of West Nile virus positive mosquitoes flying around at any given time,” says Goldberg. “They are super spreaders, more important to the spread of West Nile in the Northeast and Midwest than any other host.” ##### In July 1947 the U.S. Army Air Forces announced that they had recovered a flying saucer that crashed near Roswell Air Army Field in New Mexico. Within hours, however, the Army dismissed the statement, claiming the flying saucer was a misidentifed weather balloon.

Trader’s Dispatch, October 2012 — Page C51

We are your Meridian and Grain Max bins stocking dealer.

Smooth-wall Hopper Bottom Bins

Grain, fertilizer, seed and feed storage for on-farm and agri-business

Horizontal & Vertical Poly Tanks

Full Line Ag Chemicals

INCLUDING BULK GLYPHOSATE

Wiese Sweeps

14” & 16” In Stock

1650- to 3000-gallon tanks in stock

Liquid Fertilizer 28-0-0 in stock Delivery available

F/S MFG. 4 Trailer Sprayers 4 ATV Sprayers 4 Truck Mount Sprayers 4 Self Propelled Sprayers

On-the-farm Tire Service A complete line of tires for agricultural applications.

We make hydraulic hoses.

Fraser’s Oil Inc. Inverness 406-292-3833 • Galata 406-432-2321 • Chester 406-759-5541

Trader’s Dispatch, October 2012 — Page C52

BARLEY STRAW IN ROUND BALES FOR SALE Phone (406) 460-0717 or 278-3322, Conrad, Montana

Triple T Farm Services, LLC offering custom manure spreading service

Contact Todd

Tatman at 406-350-1888 to schedule

Grain Bin Equipment Look at the Gerber Bin Unloading System

Automatic bin unloading systems. Gerber systems can be used in either concrete floors or drying floors. Gerber sumps have enclosed slides and nylon roller so the slides won’t bind up from the weight of the grain. Available in 6”, 8” or 10” diameter for any diameter bin.

CHECK OUR COMPETITIVE PRICES AND LET US DESIGN YOU A SYSTEM TODAY!

Bin Unloader

• Electric or Hydraulic • 27° Incline • Pneumatic Tires • For 6”, 8” & 10” Underbin Systems

Come In And See This American Unloader Made Exclusively In Our Shop TOLL FREE: 800-227-2203

427 Second Street South Great Falls, MT 406-727-2203

Open 8:00 AM to 5:00 PM, Monday - Friday

BeefTalk: There is room for more cows

By Kris Ringwall, Beef Specialist, NDSU Extension Service the acres involved in hay production are up One advantage of keeping records is the slightly. However, the number of milk cows ability to look back in time. Time changes dropped from 48,000 to 20,000. This means everything, but that everything may be big that milk cows are not eating the extra hay for some and small for others. or crop production. The question asked more frequently Cattle on feed in North Dakota were today is: What is the future of the beef reported to be at 60,000 head in both 2001 business? The question is not too difficult and 2011, so the additional feedlot cattle are to answer. However, before one answers, it not consuming the additional forage. doesn’t hurt to look back as well as forward. Through time, maybe the cattle business Although those in the beef business are has changed. Some would say the changes spread throughout the world, my little area are big and others would say the changes is North Dakota, which is a great spot in the are small, but the trend is that of an invenupper northern Great Plains. tory reduction. The first point that needs to be noted is Even close to home at the Dickinson that the beef business does not stand alone. Research Extension Center, the county of The beef business, which is the business of Dunn had beef cow inventories of 56,000 producing food to feed people, is a subset cows in the 2001 report, but only 43,500 of agriculture. Therefore, one needs to look cows remained in the 2011 report. Esat the big picture of agriculture. sentially, one out of Using North Dafive cows that were kota as an example, present at the start of the North Dakota Agthe century was gone ricultural Statistics by the end of the first Service reported that decade. That is big. in 2001, there were However, historic 30,300 farms that numbers show that were farming 39.4 cattle numbers will million acres out of a fluctuate, so the curtotal of 44.2 million rent numbers certainacres. ly are not out of the Ten years later, the range of previously low cattle numbers. 2011 report indicated there were 31,900 Should we worry? farms in North Dakota farming 39.6 million The bottom line is that cattle exist for acres. Not a large difference. a reason. They need to make money. In In terms of principal crops, the 2001 previous years, even though the land and report noted there were 22.4 million acres feed bases were readily available, cattle planted. In 2011, the report noted that there numbers responded to market prices created were 22.6 million acres planted to princiby consumer demand. Feed resources do pal crops. Again, not a large difference. In not dictate the number of cows that remain terms of hay production, the 2001 report in the inventory. Market prices do and also shows 2.5 million acres, while the 2011 have in the past. report noted 2.6 million acres. Not a large The term “cattle cycle” was always in difference. bold print in any discussion of cattle invenLand mass and acres would not be extories, and the approximate 10-year cycle pected to change. The use of those acres was a real presence in the cattle business. in terms of plants also does not seem to Today, some would say the cattle cycle is change much. The plant type may change in any given year, but the bulk of agriculture not as prevalent in various discussions of the very obviously is plant-based, so maybe cattle business because the market would the statement that time changes everything indicate an opportunity for more cows to is not true. be brought into production. Maybe the concern over decreased liveHowever, time does change everything, stock production is not as significant as even the measures one records to try to preoriginally thought. Beef cattle need plants dict change. Today, the cattle business is just to live, so ample plants and plant products as real as it was at the turn of the century. should mean plenty of beef cattle. However, However, the market, consumer and even if plant usage is looked at, one has to ask: the producer have not remained unchanged. Are the plants used for direct human use or Yes, the industry still has a rough, backrouted through the livestock? The answer to-nature and real-food image, but few is critical. actually view, touch or even get close to the Changes in the beef cow inventory should real cow herd. However, there still is food be indicative of any changes in the beef for cows and cows will need to eat that food production units available to harvest plants because cow food is not human food. through the cows. The 2001 North Dakota We eat the beef and, as we speak, heifer Agricultural Statistics Service report noted numbers are up. In fact, as the century that there were more than 1 million beef started, the beef replacement heifer invencows in the state. The 2011 report showed tory was 170,000 head. Ten years later, there were 880,000 head. That is a drop 185,000 heifers are waiting to be bred. That of 122,000 beef cows since the turn of the is good and so is the cow business. It’s not century. going away. Ironically, crop production acres and May you find all your ear tags. acres of principal crops are up slightly. Also, ##### Text messages and e-mails didn’t exist in my college days. I loved checking my dorm mailbox and finding a letter from home. When my son and my nephew went off to college last fall, I wanted to give them the same thrill. So, off to the card shop I went. I stocked up on blank cards with funny pictures. I wrote silly things inside. I kept the stack on my kitchen counter and sent a card every time I thought of the boys, which was often. “The cards are awesome, Aunt Lisa,” my nephew e-mailed. Later that fall, my husband and I flew to Boston for parents’ weekend at our son’s college, I was happy to see some of my cards on his desk. “You didn’t recycle them,” I said. “Nah, they make me laugh,” he responded. Regular mail might be old school, but getting a tangible reminder that someone loves you never gets old. Just ask my boys!

Is your herd really “closed”?

By Carl Dahlen, NDSU Extension Beef Cattle Specialist Maintaining a closed beef herd is a task that few beef producers care to undertake, yet it can have benefits from a herd health and biosecurity standpoint. To be sure, most diseases enter herds through direct transmission from other cattle. With this possibility eliminated in closed-herd situations (via eliminating fence line contact with other herds, maintaining a sufficiently large genetic base to minimize negative effects of excessive inbreeding, or relying solely on artificial insemination as a means of getting breeding females pregnant), some producers go as far as to eliminate vaccinating cattle altogether. However, even the best efforts to not bring any new animals into a herd can be negated by one neighbor’s bull jumping a fence. In these cases, having naïve, unvaccinated animals can set up a playground for disease-causing agents to flourish. Even if no cattle are present in the immediate area, other possible vectors of disease transmission may exist. In 2009, I was fortunate enough to draw a once-in-alifetime elk tag for a free-ranging herd in northwestern Minnesota. The picture that entered my mind when I thought of elk hunting was a long-range passing shot either in a mountain valley or on one of the slopes. I grew up not very far from where this herd of elk called home, though, and this area certainly had no mountains in the immediate vicinity. One benefit I did have in this adventure was good snow cover, and I soon found that following tracks in fresh snow through dense poplar stands and willow swamps was a productive method of hunting. This herd of elk also happened to be in the area of Minnesota that had bovine tuberculosis in cattle and whitetail deer. As a result, all hunters were asked to call personnel from the Minnesota Department of Natural Resources upon a successful hunt so they could take a host of samples. Sections of lung, liver, blood samples, fecal samples and lymph nodes all were removed from the yearling female I harvested and shipped to researchers for evaluation. At the time, collecting the samples made sense, but the fact that they were taken soon slipped my mind. The immediate task at hand was to ensure the appropriate processing of the bounty of fresh elk I had before me. Months after the elk was in the freezer and most of it was consumed, I received a letter in the mail with the sample results from the elk I shot, along with a summary report of all the elk harvested from the area. As I read through the results, I was very intrigued by the fact that many of the elk evaluated had been exposed to, among other things, viral and bacterial diseases that are commonly vaccinated against in our cattle herds. A brief summary of the findings included:

Trader’s Dispatch, October 2012 — Page C53

We’d appreciate it if you tell an advertiser you read his ad in the Trader’s Dispatch.

DUMP TRUCK AND PUP TRAILER FOR SALE

1977 Kenworth dump truck, BC400, 13 speed, engine brake, SSHD 44,000 lb. Rockwells, power steering, ready to work............................................ $11,500 obo 1988 Fruehauf gravel pup, 3 axle aluminum end dump, needs liner......... $7500 obo

Call 406-253-9675 or e-mail: yellowiron4hire@yahoo.com for pictures Loren Hawks, Distributor

2434 Whitlash Road - Chester, MT 59522 Cell phone 406-460-3810 Home phone 406-432-3810 Visit us at www.vwmfg.com In Canada contact Vic Wickstrom (403) 528-3350

Get your order in today!

TRUST OUR EXPERIENCE

Carbide mud scrapers for Flexi-Coil and disk scrapers for Bourgault New Expanded Product Line nt Consiste of y it m Unifor Depth Planting

VW10FC–41/4”

VW11FC–31/4”

ar Long-we m iu Chrom e id Carb

VW12FC–21/4”

“Points for most conventional and air drills”

Shipping to your door available -- Plan Now and Order Early!

Call for information and price quote Stock on hand

R!!! E D N I REM arking your drill Before p spring r u o y e r u c e this fall s price e h t t a e b d needs an increases!

T & T Farm Supply, LLC

Tyrel and Tara Hendrickson - 406-759-5006 or 406-799-8576

Same great products and same convenient location on Hwy 2 in Chester, Montana “Formerly Flying Farmer Inc.”

Another report summarized the potential for deer species to serve as a source of infection for livestock and humans. In addition to the diseases mentioned above, deer species in the U.S. have been found with tuberculosis, cryptosporidium, chronic wasting disease, salmonella, brucellosis and bluetongue virus (See Böhm et al., 2007, for full report). Incidence of actual disease in deer varies and can be very regional. This list was meant to stimulate thought on what impacts a group of deer could have on your operation. A survey summary released by the U.S. Department of Agriculture in 2009 (view NAHMS report) found that 94.4 percent of producers had seen wild deer within one mile of their beef herd and 62.5 percent of producers said they frequently (more than four times per month) saw deer within one mile of their herds. You know what the deer situation is like on your individual operations. In some places, the deer wake up when the tractor starts and have a race with cattle to see who can get to the feed bunks first. Others prefer to sneak into the haystacks and silage piles around dawn and dusk, or maybe just visit the salt blocks and waterers after the cattle walk away. Deer know far fewer boundaries than our cattle and may alternate between your feed pile and the neighbors’ feed piles. With this in mind, I asked myself the question: How “closed” is a closed herd? Although disease transmission risk is lower with closed herds, it is not eliminated. Speak with your veterinarian about a vaccination program that is appropriate for your situation.

Specializing in Honey Bee Draper Headers and REM Grain Vacs

~~ IN STOCK ~~ 2-Brand New REM 27 Hundred grain vac Call for information

1 Used Rem 27 Hundred grain vac. Call for details.

We stock a large variety of Honey Bee parts including rod weeder supplies. We also have parts for REM Grain Vacs.

Trader’s Dispatch, October 2012 — Page C54

TRACTOR FOR SALE

1978 Case 2470 tractor, 7840 hours, overhauled at 6500, no PTO.................................................... $3500 Phone 406-378-2372, Big Sandy, MT

AQHA FILLIES FOR SALE Weanlings, yearlings and 2 year olds Poco Bueno breeding Phone 406-355-4943 evenings

Montana Holster & Shoulder Rig 44/45/357 500/460/454 1911’s Taurus Judge Great for Horseback Riding, Bowhunting, Backpacking, ATV riders Carry your gun with comfort • Fully lined • Premium American tanned leather Norm Schertenleib 406-965-2253 • Great Falls, MT www.montanaholster.com

Researchers use “banker plants” to help battle whitefly pests By Dennis O’Brien, Agricultural Research Service

A U.S. Department of Agriculture (USDA) scientist is showing growers how to combat whiteflies and other crop pests by using plants as storehouses for predatory insects that can migrate to cash crops and feed on the pests attacking those crops. Cindy L. McKenzie, an entomologist in the Agricultural Research Service (ARS) Subtropical Insects Research Unit at Fort Pierce, Florida, has done extensive work showing how papaya, corn and ornamental peppers can serve as “banker plants” for a range of insect parasitoids and predators. ARS is USDA’s principal intramural scientific research agency, and this research supports the USDA priority of promoting international food security. Banker plants are considered environmentally friendly because they reduce insecticide use and offer a low-cost, selfperpetuating alternative. The predators eat what they find on the banker plants and

EZ-PILOT ASSISTED STEERING REDEFINED

406-622-3887

then disperse to find targeted pests on cash crops. Before they leave the banker plants, most of the predators will lay eggs on them, which extends the effect into subsequent generations. Lower pesticide use also means pests like spider mites, thrips, and whiteflies are less likely to develop resistance to the pesticides. Using banker plants is a balancing act. Researchers must select not only the insect predators themselves, but also alternative prey that will keep the predators fed, but won’t damage the cash crops. They also need banker plants and predators that will not host or spread diseases to the cash crops. In a study designed for Florida’s greenhouse poinsettia operations, McKenzie worked with entomologist Lance S. Osborne and postdoctoral researcher Yingfang Xiao, both at the University of Florida Mid-Florida Research and Education Center in Apopka. They chose papaya (Carica papaya) for their banker plant, and the tiny non-stinging wasp Encarsia sophia as the predator. The larvae of E. sophia feed on the silverleaf whitefly (Bemisia tabaci), the targeted pest. E. sophia is native to Florida and poses no threat to the state’s habitats. In one set of experiments, they forced the wasps to eat the targeted silverleaf whitefly pest to make sure the wasps would control it. In another, they gave the wasps a choice between the papaya whitefly they supplied as a food source and the targeted silverleaf whitefly they want to eradicate. The results, published in Biological Control, show that E. sophia has an appetite for both the alternative food source and the silverleaf whitefly, and that it effectively wipes out any silverleaf whiteflies on crops near the banker plants. The system is now being tested in commercial greenhouses. The researchers have also shown that corn can serve as a banker plant for a gall midge that controls the two-spotted spider mite, and they are studying whether ornamental peppers can bank a predatory mite, Amblyseius swirskii, which is effective at controlling whiteflies and thrips. Results so far are extremely promising, and the concept is catching on among growers.

www.triangleag.com

The Trimble EZ-Pilot from Triangle Ag-Services features a sleek design integrated into the steering column, providing clear access to instrument panels and controls. It turns the steering wheel - your vehicle’s original wheel or an optional wheel - using guidance from the CFX-750 or the FmX display. Vehicle steering is immediately adjusted to compensate for rough terrain or slopes and hillsides with the new Trimble T3 Enhanced Terrain Compensation Technoloy. Like other Trimble products, the EZ-Pilot is adaptable to hundreds of vehicles so you don’t have to learn a different system in each vehicle, reducing your time and frustration in the field. Let the EZ-Pilot system keep you on line so you can focus on other important tasks.

TRIANGLE A G - S E R V I C E S PO Box 1476 : 2705 Front Street Fort Benton, MT 59442

#### Preacher D.L. Moody had been forewarned that some of the congregation usually left before the end of the sermon. When he rose to begin his sermon, he led by saying, “I am going to speak to two groups of people this morning; first to the sinners among us, then to the saints.” After the first part of the sermon, he looked around and told the “sinners” they could leave. For once, every member of the church stayed to the end of the sermon.

Trader’s Dispatch, October 2012 — Page C55

NEW HOLLAND 200 SERIES SKID STEER LOADERS

Simply take your operation to a higher level

BUILT AROUND YOU

No matter what your line of work - landscaping, farming or construction - you’ll complete your jobs more effectively with a New Holland 200 Series skid steer loader. The New Holland product development team worked with over 1,000 valued New Holland and competitive skid steer customers for three years to develop final concepts for the 200 Series skid steer loader. The product development team then used virtual reality technology and New Holland’s Arizona proving grounds to test these concepts with prototype units and customer groups of landscapers, famrers, and general contractors. New Holland listened and designed a skid steer loader that met the challenges, answered the requests and fulfilled every wish list. It’s the skid steer loader you would want on the job - one that’s durable, reliable and productive. New Holland proudly manufacturers the 200 Series skid steer loader.

From planting to harvest, the IntelliSteer™ system unites guidance technology with machine functionality in a single touch-screen display that is portable between equipment. You’ll benefit from reduced input costs, longer work hours, and advanced data collection. Experience the genius of precision farming with unparalleled simplicity.

T9000 Series CR Twin Rotor® Combines 4WD Tractors from New Holland

New Holland

Bigger on Power, Easier to Operate

More High-Quality Grain. Less Fuel. Take That To The Bank

Introducing NEW CR Series combines from New Holland. They continue the more than 35-year pure Twin Rotor bloodline, offering superior multi-pass threshing and best-in-class grain and straw quality. You can also expect industry leading stone protection thanks to the new, Dynamic Stone Protection™ system and superior residue management flexibilty with features like the new Opti-Spread™ system. Another thing you can always count on from New Holland? New innovations that increase your productivity and ROI.

The power flagship T9000 Series 4WD tractors combine horsepower, efficient hydraulics, and larger, more rugged transmissions for the ultimate in high performance. Confidently pull the widest implements and deepest tillage tools, even in the toughest conditions. All with maximum comfort and control. Range from 335-535 hp.

* Financing available exclusively to qualified buyers New Holland of Belgrade

Zerbe Bros.

Torgerson’s

Western Montana New Holland

Belgrade

Glasgow

Denton

Missoula

1-800-247-1220

1-800-228-5393

1-406-567-2221

1-877-728-1996

Torgerson’s

Great Falls

Ethridge

Havre

Lewistown

Billings

1-406-453-1453

1-406-339-2222

1-406-265-5887

1-406-538-8795

1-406-252-8614

Trader’s Dispatch, October 2012 — Page C56

PICKUP FOR SALE 1992 Ford F250 extended cab, 4x4, cab and chassis, 5 speed, weak motor. Phone (406) 799-6923

Short on Hay?

For Sale: Approximately 100 tons dryland AC Metcalfe malt barley straw • Big Round Bales, JD net wrap • We load, you haul it. • We could potentially line up trucking. • Will make good feed this winter!

Phone (406) 292-3560 for more details and price.

Generators - Generators - Generators

Yamaha Water Pumps Available in 2” and 3”

Northern Hydraulics 800-823-4937 • 406-761-8079 2600 17th St. NE • Black Eagle, MT (Great Falls) • East of Fleet Wholesale www.northernhydraulics.net

Soil fertility studies at WTARC

By Olga S. Walsh, Assistant Professor, Soil Nutrient Management, WTARC Seeding of winter wheat soil fertility studies is completed at Western Triangle Agricultural Research Center (WTARC), Conrad, Montana. Dr. Olga Walsh, Soil Nutrient Management specialist and Research Associate - Robin Christiaens would like to sincerely thank all our producers-cooperators and their families - Bradley, Martin, and Patton for allowing us to establish our research plots on their land. The research programs at WTARC and other research centers are greatly benefitting from the continuous support of the local producers. We value our producers as a great source of knowledge and experience in crop production and always welcome their suggestions so that we can tailor our research to their needs. Dr. Walsh’s work is focused on conducting practical and innovative research in remote sensing for precision nutrient management. Her research aims to develop a comprehensive crop management system for wheat that would maximize nutrient use efficiency and optimize wheat grain yields, improving grain quality, while protecting the soil and the environment. In her work, Dr. Walsh is utilizing precision sensing tools, including remote sensors. Great demand for up-to-date information on crop-specific and site-specific fertilizer use is strongly apparent among Montana crop producers. Precision agriculture tools such as sensor-based technologies make possible to accurately access crop’s nutrient status and account for spatial and temporal variability. Remote sensing is a precision agriculture technique that quantitatively measures vegetation indices that provide valuable information about crop’s nutrient status, stand uniformity and overall plant health. This enables adjusting fertilizer application rates according to site-specific conditions which results in more efficient, profitable, and sustainable crop production. We are excited to continue our Winter Wheat Algorithm study that was initially established in 2010. This project will provide the vital information about the efficacy of utilizing ground-based remote sensors, such as GreenSeeker, to predict winter wheat yield potential mid-season. Adjusting fertilizer N recommendations based on crops’ need for N will result in greater fertilizer use efficiency. Recent work by Dr. Walsh and Dr. Westcott (Western Agricultural Research Center) in spring wheat showed that sensor-based N fertilization algorithms developed in other regions did not perform well in Montana. Using three different algorithms developed in Midwest US, Canada and other countries for prescribing topdress nitrogen rates for spring wheat in 2011 growing season did not allow to achieve maximum yield potential, and protein levels were not optimized. If these algorithms were used by the producers who rely on the precision agriculture

tools and software they invested in to make their nitrogen rate recommendations, the results would be devastating in terms of both wheat yields and quality. There is no reason to believe that algorithms developed for winter wheat based on the data accumulated elsewhere would perform better for Montana conditions than tested spring wheat algorithms. One of major goals of soil nutrient management program at WTARC is to develop a reliable sensor-based nitrogen fertilizer algorithm specifically for Montana wheat and Montana growing conditions. Preliminary results of other Dr. Walsh’s field studies in spring wheat and winter wheat showed that grain yield response to applied nitrogen can vary from one variety to another. This is why six Montana’s most grown and upcoming varieties - Genou, Yellowstone, Rampart, Judee, Bearpaw, and Decade - are included in Winter Wheat Algorithm study to further investigate how the varieties might affect the sensor measurements. Accurate knowledge about crops nutrient status and crops responsiveness to nitrogen fertilization will enable for more profitable production of winter wheat. Investigating the effect of winter wheat varieties on sensor-based fertilizer nitrogen recommendations will allow to further increase nutrient use efficiency. Most importantly, this study will supply Montana producers with information needed to successfully apply precision sensor-based technologies according to what varieties they choose to grow. Several other winter wheat studies conducted at WTARC and in the cooperating producers’ fields include evaluation of various fertilizer sources, both granular and liquid, and amendments for increased nitrogen use efficiency and improved phosphorus availability. For more information on soil fertility, nutrient management and precision agriculture please call Dr. Olga Walsh at (406) 278-7707, e-mail: olga. walsh@montana.edu, or stop by for a visit at: Western Triangle Ag Research Center, 9546 Old Shelby Rd., Conrad, Montana. ##### The senior pastor and his youth pastor found a great fishing spot created by a tree downed in a recent storm. Before they began to fish, though, they made a large sign and taped it to the back of the pastor’s truck: “The end is near! Stop! Make a U-turn before it’s to late!” When a car drove by the pastors pointed at the sign and shouted at the driver, to no avail. The driver slowed down and hollered back. “You religious nuts drive me crazy. Mind your own business!” A moment later they heard a loud splash. The senior pastor looked at his friend and asked, “Do you think we should have just written ‘Bridge Out’ on the sign?”

Flaman

Trader’s Dispatch, October 2012 — Page C57

1-403-317-7200

SALES & Rentals

* No Capital Outlay *100% Write Off * No Depreciation *Easy To Book.

Over 20,000 Farmers Rented Occasional Use Equipment Last Year For your equipment rental needs, call Your local authorized

FLAMAN RENTAL DEALER

Daily, weekly, monthly rentals

Rock pickers & rock rakes Manure spreaders 15’ & 26’ mowers Land rollers • Harrows 10’, 14’ & 20’ breaking disks Trailers • Post drivers 3-point roto-tillers Grain vacs And more • Give us a call

Power, Lattin & Sons............................... 406-467-2901 Conrad, Lattin & Sons............................. 406-278-3432 Helena, Grizzly Diesel............................. 406-449-1269

Flaman Rental Equipment Dispersal Bale Carriers

2008 Haukaas 10-bale mover, SN052-018.................... $21,500 2008 Haukaas 10-bale mover, SN054-018.................... $23,500 2008 Haukaas 10-bale mover, SN034-017.................... $22,500

Wishek Discs

Hay Rakes

Bandit 65XL, 24 hp Honda V-twin, 6” material, hydraulic feed, yellow........................................................................... $8500 Bandit 65XL, 24 hp Honda V-twin, 6” material, hydraulic feed, green......................................................................... $10,500

Schulte Mowers

2008 Pro bagger with 21-ft. conveyor............................. $19,500

1992 Ezee-On 1600 23-ft. swing wing............................ $14,900 2008 Kello 275 12-ft., blades at 25.5”. Excellent Shape............. .................................................................................. $22,500 2009 Wishek 842NT 22-ft. disc with 27” front blades, 27.5” rear blades. SN 39100922................................................ $55,000 Schulte 5026, 26-ft. mower, 1000 PTO, aircraft tires, SNc50201251901..................................................... $27,900 2009 Kello-Bilt 225 TSW 26-ft. disc with 26” notched blades. ... .................................................................................. $55,000 2003 Schulte flex arm, good condition.............................. $4250 2000 Wishek 742 34-ft. disc with 22” front blades, 24” rear blades, 2003 Schulte flex arm, rough shape, SN A1010011306... $2500 10” spacing................................................................ $49,900

3 Point Hitch Equipment

Schulte BX74 74” snowblower, hydraulic chute/deflector.Excellent condition.................................................................... ...$3950 Kodiak 6-ft rotary mower................................................... $1000 Farmking 6-ft finishing mower, rear discharge, chain guards, flotation tires................................................................. $1895 Farmking 8.5-ft disc, notched blades. Excellent condition..$2095

Augers, Conveyors, Grain Equipment

Wheatheart 8” x 46-ft. grain auger, 25 hp Robin motor, no mover kit.................................................................................. $5300 Batco drive-over pit conveyor, 1800 series, 18” belt, 14” tube, 7000 bph................................................................... $13,200 Sukup 18” heater, propane or natural gas fired................ $1895

Deep Tillage

Tye Agco paratill, 6-shank sub soiler, 3-point or tow behind. Good shape......................................................................... $14,500

Tree Chippers & Planters

All used rakes missing teeth will come with spares 2008 Sovema 12-wheel V-rake, tandem axle, SN108905, zzz08440...................................................................... $9000 2008 Sovema 12-wheel V-rake, tandem axle, SN108895, zzz08444................................................................... $11,500 2009 Sovema 12-wheel V-rake, tandem axle, SN114884...$11,750 2009 Sovema 12-wheel V-rake, tandem axle, SN118642...$11,750

Grain Carts

2007 J&M 875-16 STD auger, PTO, green.................... $27,900

Land Rollers

2008 Riteway 45-ft. landroller......................................... $26,500

Manure Spreaders

2007 Leon 585 walking beam axle, flotation tires, hydraulic push system, 585 bushel, horizontal beaters, 1000 PTO, SN7125. .................................................................................. $27,900 2-2009 Leon 425 vertical beaters, walking beam axle, 1000 PTO, hydraulic push system.......................................$25,500 each 2-2006 Leon hydraulic push, walking axle, horizontal................. ..........................................................................$14,900 each

Post Pounders

1996 Wheatheart PTO drive. SN 96-06-711..................... $6500

Heavy Harrows

Call for exact tine measurement 2010 RIteway 62-ft., hydraulic angle, tines at 24.5”. SN1171421........................................................................ $37,500

Flaman Pro Grain Baggers

Land Scrapers

2007 Leon 1000, 10 cubic yards, SN8640802, zzz08102...$25,500

Grain Vacs

2009 Rem 2700, 1000 PTO, SN0129, equ0129............. $13,900 2009 Rem 2700, 1000 PTO, 423 hours, SN1379, equ1379...$15,500 2008 Rem 2500, 1000 PTO, 40-ft. of hose..................... $10,900 2008 Rem 2500, 1000 PTO, 247 hours. Excellent condition. SN2500-9496............................................................ $15,500 2007 Rem 2500, 1000 PTO, 40-ft. of hose, SN9585, zzz08303.. .................................................................................. $12,500 2007 Rem 2500, 1000 PTO, 40-ft. of hose, SN9305, zzz07301.. .................................................................................. $12,900

Grain Bag Extractors

2010 Tridekon 1210 HD, 360 degree unload auger, SN TRI-10.. .................................................................................. $28,900 2010 Tridekon 1210 HD, 360 degree unload auger, SN TRI-101086.......................................................................... $28,900 2009 Tridekon 1210 HD, 360 degree unload auger, SN TRI-101065.......................................................................... $28,900 2009 Tridekon 1210 HD, 360 degree unload auger, SN TRI-101062.......................................................................... $28,900 Tridekon 9108, good condition, all updates complete, SN TRI08-1003..................................................................... $17,900 Tridekon 9108................................................................ $15,900 Akron Unloader, 12” passenger side unload auger....... $17,900

Trader’s Dispatch, October 2012 — Page C58

ALFALFA SEED FOR SALE Certified Wrangler

Certified Shaw

Call Ernest Johnson 406-357-4182 or cell: 262-3081 or 262-3809

Ladak

IRRIGATION EQUIPMENT FOR SALE

(2) Raincat 7 tower 1/4 mile pivots. Electrical panels and spare parts included. (2) 1/4 mile mainlines; one with risers, one without. Portable diesel pump on trailer. (1) pipe trailer loaded with mainline. Call (406) 537-2333, Melville, Montana

STATEWIDE SERVICE

No job too big or small!

For all your manure spreading needs just give us a call. 2 Trucks and Loader Available

Call for a quote and to schedule your barn and corral cleaning.

(406)289-1866 etsoffice (406)cell 271-2746 or (406) 450-3332

b Kory Ha

“This is our profession, not a sideline”

Rural Nebraskans concerned about businesses’ future

Many rural Nebraskans are concerned about the future of small-town businesses and are willing to endorse various strategies to help them survive, according to the Nebraska Rural Poll. The 17th annual University of NebraskaLincoln poll was sent to 6,350 households in Nebraska’s 84 nonmetropolitan counties in March and April. Results are based on 2,323 responses. Among the topics explored in this year’s poll is the future of small businesses in rural Nebraska. A recent survey found that as many as one-fourth of all Nebraska small business owners are likely to exit their business in the next five years and up to one-half over the next decade. Nationally, data pegs that percentage much higher. The Rural Poll found that about 49 percent of rural Nebraskans believe the number of businesses in their community will be about the same in five years. Thirty-nine percent expect there to be fewer businesses while only 13 percent expect there to be more. The data also show that the smaller the community, the larger the percentage of rural Nebraskans expecting fewer businesses in the future. Another dynamic at play is the fact that the age group most likely to start new businesses – 35-54 – is in decline in rural Nebraska, said Odee Ingersoll, director of the Nebraska Business Development

Center, based at the University of Nebraska at Kearney. “So it’s not just the number of people leaving their businesses, but the number of individuals who are at the age where they might be in a position to start a business is dropping,” Ingersoll said. “This is critical.” Forty-one percent of poll respondents said that when a business owner leaves or retires, the likeliest outcome is that business is eliminated. About 31 percent said it’s likeliest that the business will be purchased by another owner, while 12 percent say some other business providing the same goods or services will start up and 11 percent say the business will transition to a member of the same family. The poll found that at least 40 percent of respondents backed the following strategies to pursue when a small business owners is considering leaving the business: work with the owner to transition to a new owner; provide technical assistance or training to people who might want to acquire the business; and use local revolving funds for loans to enable a new owner to acquire the business. The poll also explored rural Nebraskans’ use of wills and estate planning. It found that 46 percent have a will or estate plan, while about 41 percent do not currently have one but expect to have one prepared. Thirteen percent said they don’t have one and don’t expect to have one. Randy Cantrell, UNL rural sociologist, said he was surprised that even among those in agriculture, where investments in land and equipment can be quite significant, fewer than half the respondents have a will prepared. Also surprising: 51 percent of those with a high school diploma or less in education have a will prepared, compared to just 45 percent of those with at least a bachelor’s degree. The poll also found that about 40 percent of rural Nebraskans expect their estate to go to family heirs who will keep the estate active and ongoing in their local community, while 24 percent expect it to go to family heirs who will sell the estate and withdraw the assets from the community. Eighteen percent said they don’t think they’ll have enough estate to leave behind. The Rural Poll is the largest annual poll of rural Nebraskans’ perceptions on quality of life and policy issues. This year’s response rate was about 37 percent. The margin of error is plus or minus 2 percent. Complete results are available online at Nebraska Rural Poll (http:// ruralpoll.unl.edu). The university’s Center for Applied Rural Innovation conducts the poll in cooperation with the Nebraska Rural Initiative with funding from UNL Extension and the Agricultural Research Division in the Institute of Agriculture and Natural Resources.

Trader’s Dispatch, October 2012 — Page C59

grain bag unloader

Anything To Do With Grain... We Handle It!

Capacity and speed meets ease of use

Low Profile GrainBelts

Brandt GrainBelts are taking the lead in high capacity grain movement with quick, worry free grain handling that saves time and money. Gentle and quiet, they move all your commodities faster than you ever thought possible. 15 series and 20 series Grainbelts are independently tested to move in excess of 6,000 and 12,000 bushels per hour, with sizes from 75 to 110 feet. Low Profile Hopper The unique Low Profile Hopper is only 8 inches high collapsed and 16 inches extended. This allows the Transfer Conveyor to fit under even the lowest of center dump grain trucks.

IN STOCK

20” x 95-ft. and 20” x 110-ft.

With the capacity to load a 1000-bushel trailer in about 7 minutes, the Loftness GL-10 Grain Bag Unloader out-performs the competition not only in speed but in ruggedness and consistency. Stable site-to-site transportation, fast set-up, easy operation and straight forward maintenance make the GL:10 GBU an indispensable part of your grain bag storage strategy.

> Moves 2800-4000 bu/ht > Many hose/wand options > Optional self-contained hydraulics

SIMPLER WAY TO MOVE GRAIN Anything To Do With Grain, We Handle It

Bus 406-487-2216 or Toll Free 888-255-4790 email: ajproperties@nemont.net • Box 1177, Scobey, MT 59263

IN STOCK

FORMERLY ALLEN JUEL PROPERTIES

7500HP Grain Vac Flexahopper No-Spill Spout in stock

Anything To Do With Grain We Handle It! Applying peatmoss based inoculants on lentils and peas has presented problems in the past. However, this new inoculating system is a simple, accurate and cost effective method to apply inoculant. It can be mounted on all makes of air seeders as well as drill fills for disker and drill use.

nuttall

Seed InoculatorTreater

Airseeder Hopper

• universal mount • speed control for varying rates • accurate & easy to fill • operates on 12 volt power supply from truck or air seeder

The Airseeder Hopper lets you make full use of that semi-trailer, making loading your airseeder quick & easy. No hydraulic hookups . . . it mounts where the old hopper was! Aids in mixing of inoculants & seed treatment. Available in 7"-8"10" on most airseeder augers

Call Us Today! Anything To Do With Grain, We Handle It!

Used Augers, Conveyors, & Miscellaneous Poly Cupped Flighting Wheatheart drive-over pit, 8”, hydraulic. Efficiently Excellentand condition. gently handles your$6500 ................................................................................. pulse crop seed. Farm King 13x70 MDSA auger................................. $10,000 Brandt 10x60 hydraulic swing auger..Long ........................... $3500 Lasting Durability Brandt 10x60 hydraulic swing auger. ............................ For Almost Any Existing $5500 Auger! It's the logical 8x1600 choice forauger with PTO kit......................... $5000 Sakundiak seed handling equipment. 1998self Soybean Crack Test Results Sakundiak 8x52 auger, motor, propelled kit........ $13,600 The non-stick property of the Flighting Type Plastic Cup Bristle Steel Steel Cup Breakage .38% .35% 1.80% 2.10% Tebben 84”itmower........................................................ $3500 poly also makes ideal when Percent Average Breakage per 10,000 beans 38 35 180 210 using seed treatments.Many more engines on hand... Many have recent work completed Big Boot Hopper All Sale Prices Listed Are No Trade Price

We Are The New Authorized Dealer Custom Land Rolling! For Agri-Cover Roll Tarps

SRT-2 Spool Roll Tarp

EZ-LOC Roll-Up Tarp

New Farm King 7-ft. finishing mowers

Slim Fits

Bid Doors Bin Lids, Bin Ladders, Auger Ports

You can either hire us to do the work

or you can rent one of our Rollers

We also have a JD 7720 Front-Wheel Assist Tractor For Rent

equipped with GPS & e-Drive . . . Available year-round with loader and/or grapple fork New and Used Land Rollers Also Available For Sale

New Pricing & New Products

ALL THE SAME PEOPLE, JUST A DIFFERENT NAME

Stop In & See What Else Is New!

Introducing the next generation of Outback®

• Up to 50% increase in accuracy and performance with Crescent® receiver and technology • No annual subscription fees • Elevates Outback eDrive™ performance to the next level • Partner with Outback Baseline® to replace disk markers and comfortably perform row-crop and controlled traffic applications • Robust 10 Hz receiver is the platform for years of GPS upgrades and additions • Incorporates Outback's simplicity and convenience • Compatible to OutbackFEATURES: 360 and Outback eDrive™

MORE THAN MEETS THE EYE

With Lid for

IN STOCK

• All tanks have UV8 protection to prevent deterioration from sunlight. • All tanks over 1250 imperial gallons come standard with tie down lugs, 16” vented lid, gallonage indicator, bulkhead fitting. • Optional 3” heavy duty bulkhead fitting available. • All tanks are available in translucent white or black. (Black

Outback Makes GPS Assisted Steering Affordable!

Outback Sts ........... Now $2,095

www.shortlineag.com

Trader’s Dispatch, October 2012 — Page C60

Sick apple trees

If you have items you want advertised in the November 2012 issue THE VERY LATEST WE CAN ACCEPT THEM IS NOVEMBER 2.

NEW 2012 HAYHIKERS AND H&S WHEEL RAKES Financing Available oac AT SPECIAL PRICES

By Ron Smith, Horticulturist, NDSU Extension Service Q: We have a couple of apple trees that we planted two years ago. Today, we noticed some of the leaves seem to be curling and browning at the edges. The apples that had started are dried out and crusty. None of the apples are larger than a dime. I’ve taken a look through your website but haven’t seen anything that looks like our problem. Any help would be appreciated. A: This sounds like it could be a salt or herbicide problem. However, this is just a guess. You need to contact your county Extension Service agent to get the problem diagnosed. Go to http://www. csrees.usda.gov/Extension/ to find an agent nearest you. Someone there can line you up with a specialist at the land-grant university in your state who should be able to assist you. To contact Ron Smith for answers to your questions, write to Ron Smith, NDSU Department of Plant Sciences, Dept. 7670, Box 6050, Fargo, ND 58108-6050 or email ronald.smith@ndsu.edu.

NEW MORRIS HAY HIKERS 900 & 1400

NEW H&S BI-FOLD RAKES

HAYHIKER 900 Take advantage of our early order and volume discounts and SAVE $5882. – F.O.B. MVE. MSRP $25,751

Only $19,869

• High capacity with a proven design handles most crops with ease. • High speed gentle handling of your valuable crop. • No hang up points when handling the heaviest crops. • Early order and quantity discounts allow us to offer the best pricing. • 12 wheel and 14 wheel units in stock for immediate sale.

BF12HHC - 12-wheel, MSRP $14,106. Save AN INCREDIBLE 21% with our volume discount price of

JUST $11,359

New units ordered now will be $952 higher.

The Little Dealer With The BIG Promise.

“TO TREAT EVERY CUSTOMER LIKE WE LIKE TO BE TREATED.”

1-888-423-2605 or 406-323-2605 418 Main, Roundup, MT

John Albert - cell 406-860-6932, home 406-947-2203 or Guy Maberry - cell 406-350-1167, home 406-538-3634

TOrS

We know. It sounds too good to be true. But with Magnum™ tractors, equipped with SCR (Selective Catalytic Reduction) technology, there’s research to back it up. In recent independent tests*, the new Magnum 340 tractor with SCR technology outperformed the Deere 8335R in fuel efficiency across the entire power band. Plus, Magnum recorded up to 8% more drawbar horsepower than the competition. To learn more, visit your Case IH dealer or caseih.com/beready to see how Case IH tractors with SCR technology can help prepare you for the future.

ixed crop operations. Puma tractors deliver e CVT transmission, ngine and you’ve got your demands while ds past dark.

VALLEY EQUIPMENT FUEL EFFICIENCY *

/dealers/musselshellvalley

BE READY.

Drawbar Max Power

Case IH Magnum 340

PUmA SEriES TrAcTOrS 75% Pull Drawbar Max Power

Case IH Magnum 340

rEADY FOr ANYTHiNG.

WE LEFT NO STONE UNTURNED TO ENSURE THAT YOU’LL LEAVE NO CROP BEHIND.

5.2% Case IH Advantage

Deere 8335R

3.5% Case IH Advantage

Puma® tractors provide the right size and power for a wide variety of livestock and mixed crop operations. 14 16 From mower conditioner, baler or loader work to pulling mid-size row crop tools, Puma tractors deliver the precise power you need for peak efficiency and fuel economy. Now add in the CVT HPtransmission, - HR/GAL. AFS precision, and Tier 4A emissions-compliant SCR engine and you’ve got an agile, easy to operate tractor that can keep up with your demands while keeping you comfortable even when your workday extends past dark.

SEE US TODAY. MUSSELSHELL VALLEY EQUIPMENT PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

The new LB4 series large square balers were created to provide the utmost in speed, capacity, efficiency and bale density. So not only will you be able to get hay out of the field quicker, your end product will be higher in quality and provide a better nutrient value. Add to that an easy to use design with superior reliability and we think you’ll find that when it comes getting the best ROI, there’s no better choice than the LB4 series large square baler. All rights reserved. Case IH is a registered trademark of CNH America LLC.

SEE US TODAY.

The Little Dealer With The BIG Promise. MUSSELSHELL VALLEY EQUIPMENT

“TO TREAT EVERY CUSTOMERMUSSELSHELL LIKE WE LIKE TO BE TREATED.” VALLEY EQUIPMENT

PO Box 327 PO Box 327 1-888-423-2605 or 406-323-2605 Main, Roundup, MT 418418 Main St. 418 Main St. Roundup, MT 59072 Roundup, MT 59072 John Albert - cell 406-860-6932, home 406-947-2203,406-323-2605 406-323-2605 www.caseih.com/dealers/musselshellvalley Guy Maberry - cell 406-350-1167, home 406-538-3634 www.caseih.com/dealers/musselshellvalley

CELEBRATING 65 YEARS OF DOING BUSINESS WITH YOU.

* Magnum 340 (preliminary Nebraska Tractor Testing Laboratory (NTTL) test November 2010), drawbar maximum power at 17.13 hp-hr/gal., and 75% of pull maximum power at 15.99 hp-hr/gal., compared to Deere 8335R (NTTL test 1990, April 2011) drawbar maximum power at 16.28 hp-hr/gal., and 75% of pull maximum power at 15.45 hp-hr/gal. Case IH is a registered trademark of CNH America LLC. www.caseih.com

Trader’s Dispatch, October 2012 — Page C61

YOUR MA XIMIZE N DEDUCTION. IO T IA C e DEPRE r regarding th

tax adviso Consult your iation and bonus deprec n.† % 50 ar ing deductio first ye ns pe ex 9 17 n io ct Se $139,000

The new RB564 premium 5' x 6' baler was engineered for specialty crops like cornstalk and waterway baling. Its five-bar pickup combined with a roller windguard delivers increased feeding consistency and optimal performance in tough crop conditions. And with the durable bale chamber design combination of rolls and belts, you’re guaranteed to deliver a dense, well-formed bale every time. To learn more, see your Case IH dealer today or visit caseih.com.

PUmA SEriES TrAcTOrS rEADY FOr ANYTHiNG. BETTER BALES

Puma® tractors provide the right size and power for a wide variety of livestock and mixed crop operations. From mower conditioner, baler or loader work to pulling mid-size row crop tools, Puma tractors deliver the precise power you need for peak efficiency and fuel economy. Now add in the CVT transmission, AFS precision, and Tier 4A emissions-compliant SCR engine and you’ve got an agile, easy to operate tractor that can keep up with your demands while keeping you comfortable even when your workday extends past dark.

Well-formed, dense bales hold their shape, stand up to the weather better, and are easier to handle, transport and stack. The RB564 premium 5' x 6' baler features “over-the-edge” mesh wrap which provides full bale coverage to retain more leaves and excellent weather resistance. The net wrap is front loading, providing a short path for optimum wrapping quality.

SEE US TODAY. MUSSELSHELL VALLEY EQUIPMENT

EFFICIENT FEEDING MAXIMIZES PRODUCTIVITY

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

PUmA SEriES TrAcTOrS

This baler features the widest pickup in the industry

allowing you to pick up wide windrows at high speeds. rEADY FOr ANYTHiNG. Puma® tractors provide the right size and power for a wide variety of livestock and mixed crop operations. Pickup durability and performance is maximized with From mower conditioner, baler or loader work to pulling mid-size row crop tools, Puma tractors deliver a roller windguard and five-bar pickup with the precise power you need for peak efficiency and fuel economy. Now add heavy-duty in the CVT transmission, AFS precision, rubber-mounted and Tier 4A emissions-compliant SCR engine and you’ve got tines. an agile, easy to operate tractor that can keep up with your demands while keeping you comfortable even when your workday extends past dark.

SEE US TODAY. MUSSELSHELL VALLEY EQUIPMENT

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

Case IH Maxxum Series tractors combine efficient power with operator convenience to make loader and hay work more productive with 90 to 120 PTO horsepower. ®Case IH Puma Series tractors offer big tractor performance with ® mid-size versatility. Ranging from 105 to 195 PTO hp with CVT transmissions, they have the horsepower to handle both livestock and row crop tasks in mixed farm operations. Plus the new Case IH SCR engine technology brings a new level of fuel efficiency to your operation.

CHECK OUT THE NEW RB564 BALER TODAY!

SEE US TODAY! OFFER ENDS DECEMBER 31, 2012.

MUSSELSHELL VALLEY EQUIPMENT

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

PUmA SEriES TrAcTOrS rEADY FOr ANYTHiNG.

* For commercial use only. Customer participation subject to credit qualification and approval by CNH Capital America LLC. See your participating Case IH

dealer for details and eligibility requirements. Down payment may be required. Offer good for a limited time. Not all customers or applicants may qualify. CNH Capital America LLC standard terms and conditions will apply. Offer subject to change or cancellation without notice. † CNH Capital and Case IH dealerships do not provide tax, legal or accounting advice. Customers are strongly encouraged to seek their own professional advice on the proper treatment of these transactions. CNH Capital and Case IH are registered trademarks of CNH America LLC. www.caseih.com

SEE US TODAY. MUSSELSHELL VALLEY EQUIPMENT

PUmA SEriES TrAcTOrS

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

rEADY FOr ANYTHiNG.

Puma® tractors provide the right size and power for a wide variety of livestock and mixed crop operations. From mower conditioner, baler or loader work to pulling mid-size row crop tools, Puma tractors deliver the precise power you need for peak efficiency and fuel economy. Now add in the CVT transmission, AFS precision, and Tier 4Areserved. emissions-compliant SCR All rights Case IH is a registered trademark of CNHengine America LLC.and you’ve got an agile, easy to operate tractor that can keep up with your demands while keeping you comfortable even when your workday extends past dark.

SEE US TODAY.

CASE IH WD3 SERIES WINDROWERS. MUSSELSHELL VALLEY EQUIPMENT Box 327 THE CLEAR CUT ADVANTAGE.PO 418 Main St.

Increase the productivity of your WD 3 Series windrower with the allRoundup, new RD3 MT 59072 406-323-2605 Series rotary disc header. Its industry-leading cutting width of 19’ 4” covers more www.caseih.com/dealers/musselshellvalley acres each hour. The new cutterbar profile reduces horsepower requirements to maximize performance and reduce fuel consumption. The new heavy duty frame and cutterbar components ensure season after season of durability for commercial operators and high volume producers.

PUmA SEriES TrAcTOrS rEADY FOr ANYTHiNG.

PUmA SEriES TrAcTOrS

SEE US TODAY.

SEE US TODAY! MUSSELSHELL VALLEY EQUIPMENT PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

rEADY FOr ANYTHiNG.

MUSSELSHELL VALLEY EQUIPMENT

PO Box 327 418 Main St. The new Case IH Farmall Series tractors areTODAY. built with proven basics – like SEE US Roundup, MT 59072 a dependable, fuel-efficient diesel engine and a straightforward mechanical 406-323-2605 transmission – for simple operation and rugged reliability. No fancy electronic VALLEY EQUIPMENT www.caseih.com/dealers/musselshellvalley controls. Just simple machines built with all the pulling power and MUSSELSHELL hydraulics you need for loading, blading, tilling, mowing, baling and more.

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 www.caseih.com/dealers/musselshellvalley

PO Box 327 418 Main St. Roundup, MT 59072 406-323-2605 “TO TREAT EVERY CUSTOMER LIKE WE LIKE TO BE TREATED.” www.caseih.com/dealers/musselshellvalley

1-888-423-2605 or 406-323-2605

The new Case IH Farmall Series tractors are built with proven basics – like a dependable, fuel-efficient diesel engine and a straightforward mechanical transmission – for simple operation and rugged reliability. No fancy electronic controls. Just simple machines built with all the pulling power and hydraulics you need for loading, blading, tilling, mowing, baling and more.

418 Main, Roundup, MT

John Albert - cell 406-860-6932, home 406-947-2203, Capital and Case IH are registered trademarks of CNH America LLC. www.caseih.com Guy Maberry -CNHcell 406-350-1167, home 406-538-3634

CELEBRATING 65 YEARS OF DOING BUSINESS WITH YOU. Contact us at www.caseih.com/dealers/musselshellvalley or www.musselshellvalley.com

Trader’s Dispatch, October 2012 — Page C62

WANTED TO BUY: Any type farm tractor 1970 or newer. Good shape, wrecked, rolled, burned, or with mechanical problems. Will pay top dollar.

Can e-mail photo to ronheath@hotmail.com Phone Ron Heath, (208) 681-4429, Blackfoot, Idaho

GOETTLICH BROTHERS TRUCKING

CUSTOM HAULING Cattle and hay

~ ~ HAY FOR SALE ~ ~

Phone Trent Goettlich, Hilger, MT 406-350-0229 or 406-462-5554

KROGMANN BALEBEDS

* 12 gpm engine driven hydraulics or electric models * Ask our customers about Krogmann dependability, durability and our 3 year warranty. * Options available: Across the bed toolboxes, side toolboxes, carry-alls, 3rd spool valve, cake feeders and posthole diggers. Visit our website at www.krogmannmfg.com

KROGMANN MFG. Sabetha, KS

Toll Free 1-877-745-3783

Call For The Dealer Nearest You

2008 TYM 4x4 loader 292 hours, 58 hp Cat diesel, 3-point, live PTO, enclosed cab, air conditioning, power steering, quick attach 72” bucket, remote hydraulics front and rear...................... $26,500 1975 Hyster 24 ton tiltbed 25-ft. deck, air brakes, good tires, nice shape............ $6250 1984 Eager Beaver 14 ton tiltbed, 20-ft. deck, electric brakes, new tires, tandem 12,000 lb. axles............. $4750

Risk management: Supply factors worth watching

By Casey Chumrau, USW Market Analyst 2012/13, together they accounted for less Wheat buyers everywhere should pay than 1 percent of world exports on average close attention now to world wheat supply for the past five years. to help manage their risk, even though three In contrast, Black Sea region wheat proquarters remain in marketing year 2012/13. duction will fall far below last year’s record The Northern Hemisphere’s harvest prolevels and accounts for much of the drop in vides some concrete supply information, but world production. Harvest reports indicate much uncertainty remains, so buyers should that minimal snow cover and extremely stay current and aware of factors affecting cold temperatures caused a lot of damage exportable supplies and prices. to their winter wheat. Ukrainian agricultural World wheat production is the most basic, consultancy UkrAgroConsult reduced its but important, factor shaping world supply. 2012/13 wheat production forecast to 14.2 Prospects for the 2012/13 crop have deteriorated since the first estimates in May due MMT in August, lower than USDA’s August to worsening weather conditions in several estimate of 15.0 MMT and 36 percent below key production areas. The U.S. Department last year’s output. USDA also expects Kaof Agriculture (USDA) currently estimates zakhstan’s production to fall more than 50 world output at 663 million metric tons percent from last year to 11.0 MMT. (MMT), down from the May forecast of 678 Russia’s production and the governMMT and below the five-year average of ment’s potential response arguably bear 666 MMT. The International Grains Council watching the most this marketing year. also lowered its August world production While the Russian government’s official forecast to 662 MMT, down from its May 2011/12 wheat production estimate stands estimate of 676 MMT. at 45.0 MMT, Russian agricultural analyst The overall world production number, SovEcon reduced its estimate today to 38.0 however, does not tell the entire story as MMT (see chart below). If realized, producindividual outlooks for each key wheattion would fall short of the 2010/11 crop of producing region look very different. For 41.5 MMT, which led Russia to impose a example, notwithstanding the publicity of a year-long export embargo. SovEcon also devastating drought, the United States will reported that the country’s exportable grain produce a wheat crop that is above average surplus could run out by November if the (reported on Aug. 16). In fact, USDA estihigh export pace continues. As a result, mates production will increase 14 percent many industry participants question whethfrom last year to 61.7 MMT, greater than er another ban is on the horizon. Russian the five-year average of 59.7 MMT. Canada officials have repeatedly declared that an is also poised to have an excellent harvest. export ban is not an option in calendar year Statistics Canada expects 2012/13 Canadian 2012, but the speculation alone is enough wheat production to reach 27.0 MMT, up 7 to create uncertainty in the world market. percent from 2011/12 and the second highConcerns about harvest in the Southern est production in 15 years. Hemisphere and ongoing U.S. drought conUSDA expects production in several ditions further add to market uncertainty. other major wheat-producing countries to Argentina’s planted wheat acreage is at a remain relatively close to last year’s output 40-year low and USDA estimates Australian levels. When combined, the 27-country Euproduction down 12 percent, with weather ropean Union is the world’s largest wheat conditions threatening to decrease that numproducer. Both USDA and French-based ber even further. Soil moisture conditions Strategie Grains project 133 MMT for the in the United States will also affect winter 2012/13 EU wheat crop, just 3 percent wheat planting decisions over the next two lower than the prior year’s 137 MMT. The months. People’s Republic of China produces more At this early stage in the marketing wheat than any other single country in the year, we must wait to see how these supworld. According to USDA’s projections, ply factors will turn out and influence the Chinese production will reach 118 MMT overall wheat market. The current level of for the second consecutive year. USDA does uncertainty leads to price fluctuations and expect a significant 8 percent (7.03 MMT) represents risk for world wheat buyers. For production increase in India. However, as this reason, it is important to stay vigilant. reported here June 21, 2012, while China USW representatives around the world and India will account for more than 30 stand ready to discuss market issues and percent of total estimated world supplies in opportunities for U.S. wheat customers.

International 2574 Dump 290 bc Cummins, 13 speed, double frame, 15-ft. Williams box, spring over suspension, 90% 11R24.5’s, plumbed for pup, nice tight truck.... $12,500 2006 Cat 216B skidsteer Series 2, 51 hp diesel, 1500 lb. lift capacity, 60” bucket, Mighty Mite 8-ft. full hydraulic road grader attachment, 385 hours, like new...................... $26,500

1980 GMC water truck 2000 gallon nice steel tank, 5.5 hp 1 1/2” pump, rear spray bars, 427 V8, 5 speed + 2 speed, power brakes, power steering. Runs and drives good.............................. $3750

406-381-3159 or 777-7057

##### A father brought his daughter to church. He sat in the very front row so that she could properly witness the service. During this particular service, the minister was performing the baptism of a tiny infant. The little girl was taken by this, observing that he was saying something and pouring water over the infant’s head. Turning to her father, she asked, “Daddy, why is he brainwashing that baby?”

Trader’s Dispatch, October 2012 — Page C63

Over 13 Case IH Dealerships Throughout Montana And Wyoming To Serve You Visit www.CaseIH.com to find a dealership near you. Big Sky Equipment, Conrad 1-800-332-7541 Glasgow Implement, Glasgow 1-800-345-6042 Heart Mountain Farm Supply, Powell, WY 1-800-877-6758 Kamp Implement, Belgrade 406-388-4295 Manning International, Hysham 406-342-5571 Musselshell Valley Equip., Roundup 1-888-423-2605 Torgerson’s, Billings 406-252-8614 Torgerson’s, Denton 406-567-2221 Torgerson’s, Ethridge 406-339-2222 Torgerson’s, Great Falls 406-453-1453 Torgerson’s, Havre 406-265-5887 Torgerson’s, Lewistown 406-538-8795 Tri-County Implement, Sidney 1-800-624-6540

Trader’s Dispatch, October 2012 — Page C64

WSU Creamery employee earns cheese professional certification

Now nits p to U u o Demailable scount v i A 00 D $10

North of Great Falls, MT

(406) 727-9994 countryclipper.com

UTV FOR SALE

2011 Polaris Ranger, full cab, 450 miles, extremely clean.

Farming. It’s more than a business,

IT’S A WAY OF LIFE.

Protect your property with Farm Ranch insurance from State Farm*. For comprehensive coverage on your home, outbuildings, autos, equipment and livestock, contact me today. Fosse Insurance Agcy Inc Gary T Fosse, Agent 222 15th Street South Great Falls, MT 59405-2459 gary@fosseinsurance.com

Bus: 406-268-8888 Toll Free: 800-597-6446

Providing Insurance and Financial Services statefarm.com* State Farm Fire and Casualty Company State Farm General Insurance Company – Home Offices: Bloomington, Illinois

4212 North Star Blvd. #4

Distributing Company

By Washington State Uninversity Extension From engineering and physics to cheese The Washington State University (WSU) “Cheese making is Nial’s forte,” said Creamery employee Nial Yager is among Russ Salvadalena, manager of the WSU the first class to earn the Certified Cheese Creamery. “He’s been our go-to guy to Professionals™ rank from the American answer our cheese-making questions for Cheese Society (ACS). Yager is one of 121 years. He is one of our senior employees, individuals who passed the inaugural Certihaving started as a student in 1988, so this fied Cheese Professional exam on August is an important validation of his knowledge 1 in Raleigh, N.C. This group consists of and experience.” professionals from across the United States While a student at WSU, Yager studied and Canada. mechanical engineering and physics but The Certified Cheese Professional quickly grew enamored of cheese making (CCP) exam is the first of its kind. It was and has made that his profession. established to encourage high standards Beyond years of experience of comprehensive cheese knowledge and “I knew quite a bit about the production service for professionals in all areas of the of the kinds of cheese we make here, but industry. The exam was developed over the exam is all-encompassing, so I had to an eight-year period with more than 100 study a lot,” Yager said. “There were quesindustry experts working together with tions about cheeses that we don’t make, credential consultants Knapp International about handling cheese, about hygiene in and software provider ExamSoft. production facilities, and about food safety Testing encompasses a broad range in the retail cheese business. It was a really of topics including raw ingredients; the comprehensive exam on all aspects of the cheese making process; storing and hancheese business.” dling; selecting distributors; marketing and Yager said he studied for and took the communicating; nutrition; regulations and exam in order to add value to courses sanitation. taught at the Creamery. “We offer short courses on cheese making which attract people from all over the country. So 406-453-0010 taking the exam deepens our skill level and broadens our Montana Toll Free knowledge base, so that we 1-800-452-0010 can offer our cheese making Great Falls, Montana students a richer experience.” Yager compared the test to a bar exam for law students, and said that despite his years of experience, he needed to read several books, some incredibly technical, in order to expand his knowledge and meet the demands of the exam. “I applaud the efforts of all those who displayed their cheese-industry knowledge by passing this exam,” said Nora Weiser, ACS executive director. “The expertise of American Cheese Society Certified Cheese Professionals not only elevates the industry, but also commuWe carry all Parts & Filters nicates to consumers that a for self-propelled highly knowledgeable and sprayers and floater trucks reliable cheese resource is available to them.” By passing the exam, Yager NOW earned the right to use the title IN ST OCK ACS Certified Cheese ProfesNEW Raven sional™ (or ACS CCP™). He also will be required to demGuidance onstrate continued participaNew Low Price Of $1695 tion in the cheese industry and continued professional Call for development to maintain Special Pricing this credential, and will be ✔ Touchscreen Display required to recertify every ✔ On-Screen Guidance (Optional) three years. ✔ Detailed Datalogging ✔ Reports Click the following links to ✔ Controller Area Network (CAN) Technology learn more about the Certified ✔ Profile ✔ Scout - Map field boundaries Cheese Professional exam or create in-depth field maps. www.cheesesociety.org and the WSU Creamery www. creamery.wsu.edu.

Complete line of

LIQUID Fertilizer Handling & Injection Equipment P Pumps (pivot application, tool bar & sprayer application)

P Trailers & Tanks (storage/transport, stationary storage)

P Injection Nozzles for pivot application P Drop Tubes & Nozzles for field sprayers Replace Problem Solenoid Valves with Electric Ball Valves Crop Protection System

15, 42 and 70 gallon capacity The Handler is designed primarily for direct induction of chemical into sprayers.

20-years experience...We service what we sell

Air Seeder Hose IN STOCK Black & Clear

Liquid Storage Tanks

All Shapes and Sizes

Excellent Selection On Hand 10,000 gallon poly fertilizer storage tanks on hand Bring in any competition AD and we’ll match their price!!

✔ Guidance ✔ Boom Section Control ✔ Boom Height Control ✔ One Package

We carry all “Aim Command” Parts On Hand

##### Nothing is predestined: The obstacles of your past can become the gateways that lead to new beginnings. -Ralph Blum

Aflatoxin may be a risk for producers

By Tracey Renelt, SDSU Extension Dairy Field Specialist As harvest has started on South Dakota’s corn crop all livestock producers are encouraged to test for aflatoxins due to prime environmental conditions for their development. Producers should consider testing their corn, DDG’s, corn gluten and silage piles when either purchasing or selling their feedstuffs. Another feedstuff that poses potential concerns for aflatoxin development in drought stressed conditions is fuzzy cottonseeds, which is often used in dairy rations. Conditions that promote the production of the mycotoxin aflatoxin are hot weather and drought stress. The prime conditions for this fungal toxin development are days when the temperature is greater than 70 degrees Fahrenheit at night and the corn grain is in the latter stages of grain fill during drought stress.¹ The mold found on corn is gray-green to olive-green in color, and the two most common fungi that produce this toxin are Aspergillus flavus and Aspergillus parasiticus. Aflatoxins are a concern for livestock producers, especially dairy producers, as the toxins are harmful and even possibly fatal to livestock and are carcinogenic to animals and humans. Most commonly, aflatoxins negatively affect feed efficiency, reproduction, and suppress the immune system of livestock. The most common type of toxin, aflatoxin B1, is a carcinogen. This can become a concern as it can appear in milk when corn with aflatoxin concentrations over 20 ppb is fed to dairy cows.¹ The legal limit for aflatoxin in milk, according to FDA regulations is 0.5 ppb (aflatoxin M1). Typically, elevators do not accept corn with aflatoxin concentrations of 20 ppb (parts per billion). In addition, the Food and Drug Administration (FDA) has an “action level” of 20 ppb for aflatoxins in corn that regulates interstate commerce. This is the level at which federal agencies may take action, including the seizure of the corn or prohibition of its sale.¹ The FDA has established guidelines for using aflatoxincontaminated grain as follows: • Less than 300 parts per billion (ppb) for corn intended for finishing beef cattle; • Less than 200 ppb for corn intended for finishing swine weighing 100 pounds or greater; • Less than 100 ppb for corn intended for breeding beef cattle, breeding swine, or mature poultry; • Less than 20 ppb for corn intended for lactating dairy animals, immature animals; animal species, and uses not specified above or when the intended use is unknown. Producers and the public will also have the opportunity to learn first-hand about “mycotoxin-contaminated feeds and livestock production” from Lon Whitlow, professor at NCSU. He is a leading expert in mycotoxins and is being sponsored jointly by Prince Agri Products, Inc. and the South Dakota State University (SDSU) Extension Service as a featured speaker on the campus of SDSU, Alfred Dairy Science Hall, room 100, on November 7th, from 3-5 pm. There are several reference sources that are available as producers consider options if they are dealing with aflatoxins in their corn. The resources speak to harvest, storage, and utilization considerations of corn that may be contaminated with aflatoxins. In addition to contacting your South Dakota Regional Extension Center with further questions, these on-line resources are also available: • ¹ Hurburgh, C., Loy, D., Robertson, A., Munkvold, G. & Meyer, J. (2012). Aflatoxins in Corn (http://www.extension. iastate.edu/Publications/PM1800.pdf). Iowa State University Fact Sheet PM 1800. • ² Garcia, A. & Thaler, B. (2010). Dealing with Mycotoxin-contaminated Feeds at Feeding Time (http://pubstorage. sdstate.edu/AgBio_Publications/articles/ExEx4043.pdf). SDSU ExEx Fact Sheet: 4043. • Mike Hutjens, Illinois Extension dairy specialist and Jim Baltz, instructional design specialist with the University of Illinois developed a YouTube video (http://www.youtube. com/watch?v=MGOP5d2awjA&feature=youtu.be) on the risk of aflatoxin and how to deal with aflatoxin. You can also visit the University of Illinois YouTube channel (http:// Go.Illinois.edu/dairy) for more information. For more information on testing for aflatoxin levels visit the South Dakota State University Plant Diagnostic Clinic (http://www.sdstate.edu/ps/plant-clinic/index.cfm) website, or call the clinic at (605) 688-5545. Services offered include aflatoxin, fumonisin, zearalenone, and deoxynivalenol (DON) screenings.

Trader’s Dispatch, October 2012 — Page C65

Deadline for advertising in the November 2012 issue is FRIDAY, NOVEMBER 2.

www.agrasyst.com

LOOK AT THIS!

---- LATE MODEL ------- LEASE RETURNS ----

1971 Chevrolet Cheyenne Super 2WD short box with factory air conditioning, big block. Runs, drives and looks like new. Call for more info and additional pictures............................................Price reduced

2012 Chevrolet Silverado 2500 LTZ 4x4, crew cab, short box, heated leather, bed liner, running boards. 2012 Chevrolet Equinox AWD. 2012 Chevrolet Impala LT, 4-door, cloth interior, well equipped, 15,000 miles. 2011 Chevrolet Malibu LT sedan, 4 cylinder, automatic, cloth interior, 19,000 miles, silver.

---- 2- & 4-WD TRUCKS ----

2010 Chevrolet Silverado 1500 4x4, 5.3L V8, extended cab, long box, 9500 miles.

---- USED SUV’S & VANS ----

2012 Chevrolet Suburban 4x4, heated leather, 18,000 miles, black.

2008 Chevrolet Silverado 2500 4x4, short box, Duramax diesel, Allison automatic transmission. 2008 Chevrolet Silverado 1500 LTZ 4x4, crew cab, leather, fully loaded. 2007 GMC Sierra 2500 4x4, extended cab, long box. Excellent. 2004 Ford F250 4x4, 6.0L diesel, crew cab, short box, heated leather. Very clean.

---- USED CARS ----

2011 Cadillac CTS AWD, 23,000 miles, very sharp.

2010 Chevrolet Impala LT 3.5L, automatic, cloth interior, 28,000 miles, white. 2008 Ford Focus 4-door, 4 cylinder, automatic, 31,000 miles. 2007 Chevrolet Impala V6, cloth seats, 58,000 miles, very nice. 2007 Ford 500 4-door sedan, leather interior, sunroof.

2011 Chevrolet Tahoe LTZ 2WD, heated/cooled leather seats, navigation, DVD, sunroof, 4600 miles. Completely loaded. 2011 Mitsubishi Endeavor AWD, cloth interior, 28,500 miles. 2010 Dodge Caravan, 28,000 miles.

2007 Hummer H3 5 cylinder, 5 speed manual, 36,000 miles. 2002 Chevrolet TrailBlazer 4x4, low miles.

Looking for a good, used car? Stop in and talk to Bob or Gene.

DIRKES’

Phone Gene Lewis in Fairfield 467-2321 Fairfield toll-free 1-800-967-2445

Phone Bob Dirkes in Choteau 466-2061 Choteau toll-free 1-800-345-2061

Trader’s Dispatch, October 2012 — Page C66

low boy service

40-ton RGN for hire to transport machinery, tractors, etc. up to 60,000 lbs. 48-ft. stepdecks also available. Montana & surrounding states, insured & experienced. Call Roger or Larry at Roger Rader Inc., Sun River, MT 406-264-5475

Agriculture Law Water Law

Oil & Gas Law Energy Law

Natural Resource Law Farm & Ranches Corporations Partnerships

Neal Law, P.C. 417 S. Main St. Conrad, MT 59425

Paul L. Neal

Ph. 406-271-2804 Fax 406-271-2934

Limited Liability Co.

Small Business

Estate & Probate

Wills & Trusts

Real Estate Transaction

Property Law Contracts Litigation

Personal Injury

Family Law

Criminal Law

Liquid -

National Beef Quality Audit – Phase 1 identifies quality attributes of beef

By B. Lynn Gordon, SDSU Extension Cow/Calf Field Specialist where cattle were raised; 4) lean, fat and The 2011 National Beef Quality Audit bone; 5) weight and size; 6) genetics; and (NBQA) results have been tallied and re7) visual characteristics and representatives cently released providing the beef industry from each beef production and marketing sectors with the latest data on this benchsector were interviewed to provide input on mark study which is conducted every five these seven quality attributes. years. Dr. Keith Belk, professor of animal One of the new elements studied in Phase science with Colorado State University was 1 revealed that all segments of the industry the lead researcher on Phase 1 of the three would like to have more information atphase audit. tached to the cattle they are purchasing or Phase 1 consisted of face-to-face interthe product they are purchasing, Belk comviews of companies that participate in all ments. For example, this information can sectors of the beef industry marketing chain, impact the feedlot industry in ways such as explains Belk and the focus of this phase is knowing the source of the cattle and health to identify things that the production sector management systems and retailers who are of the industry is doing well or that need to concerned with the way cattle were raised. be improved upon. Companies interviewed Nevertheless, Belk says the results showed included feeders, packing companies, food that at all points of the industry they want service, distribution or processing entities, more information about the product they are retailers and also those who are in an affilibuying and this clearly came out in the data ated role such as the government sector or analyzed in Phase 1. allied industry. Key conclusions from Phase 1 included: New experimental concepts were added 1. Terminology about quality among segto Phase 1 for the first time due to access ments of the industry is not standardized to new technology. Beef quality attributes and as a result makes communication with were divided into seven categories: 1) food consumers about quality parameters more safety; 2) eating satisfactions; 3) how and difficult to explain and for the consumer to interpret. 2. Consumers are seeking more information about how the beef they are purchasing in retail or foodservice outlets DrY - Anhydrous was raised and where it come from. 3. Food safety is the single most important quality category to packers, food service and retailers. 4. Continuous improvement in food safety and eating satisfaction should be an industry-wide focus. 5. Retailers, foodservice and packers are under additional customer/societal pressures to ensure animals were raised under humane conditions. Kremlin, Montana 6. The industry needs to do a better job telling its story. Phase 1 research found that the face-to-face interviews clearly revealed the industry needs to work on being transparent about the product produced or telling the story of beef production to the general public. This was identified as one of the weaknesses for the industry and thus going forward the research concluded this is an element that the industry must implement. The NBQA was funded by the Beef Checkoff and conducted by a team of reConventional sprayer nozzles produce both small and large dropsearchers representing sevlets. The small droplets drift and the large drops run off the leaves. eral land grant universities The Air Bubble Jet consistently produces a uniform droplet that and was coordinated by the is 400 microns in size. Chemical contact with the leaf is improved National Beef Quality Audit. and drift is reduced. Results of Phase 2 and Phase 3 of the NBQA will also be featured in upcoming articles on igrow.org.

Ag Wise, Inc.

406-372-3200 Check us out for all your sprayer parts & supplies! Including hose, valves, fittings & more! “Your Crop Production Specialist”

LIQUID FERTILIZER

28-0-0 & 32-0-0 IN STOCK

AIR BUBBLE JETS Sprayer Nozzles Reduce Drift & Improve Leaf Contact • 58% drift reduction

Delivery Available

High NRG-N

27% multi-form Nitrogen plus 1% Sulfur, and a Chlorophyll building package. Stabilized for reduced volatility and leaching loss potential, Organic Chelates enable nitrogen reserve for longer feeding.

Fully Loaded 41% glyphosate

##### The color of a head louse tends to mimic the color of the person’s hair in which it lives, making it more difficult to detect.

Trader’s Dispatch, October 2012 — Page C67

Improve Your Quality of Life Today!

• 10” auger

• 8” system

Buy or Lease To Own

• 8” system

• 13” auger

• 7” system

$4456/yr - oac

2650 Balebuster

2655

Only 65 hp needed

Only 90 hp required

• Feed square or round bales • Live floor • Twine protection Buy or Lease To Own

• Right side discharge

• Two stage bale loader

Buy or Lease To Own

$4084/yr - oac

$6499/yr - oac IN STOCK

Buy or Lease To Own

• 40-ft. • Roll tarp

$5571/yr - oac

• Live floor • Right hand discharge • Short cut machine • Tapered rollers Buy or Lease To Own

$4586/yr - oac

Steel Drop Deck Trailers

Grain Trailers

• Steel grain trailer • 24.5” low pro recaps

• 10” auger

Buy or Lease To Own

$5264/yr - oac

$6999/yr - oac

2800 Balebuster Bale processors

• 13” auger

5200 bu/hr.

Buy or Lease To Own

$4456/yr - oac

5200

7500 bu/hr.

10,000 bu/hr.

5000 bu/hr.

• 7” system

7500

3700

2700

IN STOCK

• Aluminum grain trailer • 42-ft. • Roll tarp • Air ride suspension • Aluminum rims Buy or Lease To Own

$7304/yr - oac

• 48-ft.x5-ft. beavertail • Air ride suspension • 22.5 import tires Buy or Lease To Own

$6650/yr - oac

NEW Super Bee

DEMO Unit!

Post Pounder

• 49 hours

• 26 EFI • 48” deck • Electric dump

Buy or Lease To Own

• Float tires

$2782/yr - oac

• 29 hp EFI • Kohler engine • 52” rear discharge gear drive deck Buy or Lease To Own

$2422/yr - oac

• Drive a post in 10 seconds • Pull with pickup or ATV • Accurate position • Self contrained unit • 13 hp Honda engine

Buy or Lease To Own

$2225/yr - oac

Check us out on the web at www.frielingsonline.com 3400 Old Havre Highway – Great Falls, MT

1-888-453-2924

Danel Frieling

Keith Lippert, cell 799-1494

“Like” us on

Trader’s Dispatch, October 2012 — Page C68

Cut Bank is

CAR TOWN

12,800 miles on this gorgeous 2009 Ford F150 Lariat supercrew 4x4. ONE OWNER, NON-SMOKER.

2006 Ford F250 XL crew cab, 6 speed manual tranny, Power Stroke, 4x4.

13,000 miles on this BEAUTIFUL 2011 Ford Ranger 4x4.

Get a FANTASTIC DEAL on this

SHARP 2002 Ford F150 XLT supercrew, 4x4.

2009 Chevrolet Silverado 4x4. Only $17,995.

NEW 2012 Ford F150 Harley Davidson Edition 4x4!!!!!

2005 GMC 1500 4x4.

2006 Ford Expedition Eddie Bauer!!!!!!!

2003 Ford F250 crew cab, Power Stroke, automatic.

2006 Ford F350 crew cab, Lariat, Power Stroke, automatic, dually, 4x4. Custom show pickup for a regular price 2001 Ford F150 supercrew, 4x4, lifted, custom paint, custom leather seats, winch, box cover.

2003 Ford Escape front wheel drive.

Ready for work. New 2012 Ford cargo van.

2005 Dodge Stratus

Book value over $41,000, our price $29,900 on this 2010 Ford F350 King Ranch crew cab, Power Stroke, automatic!!!!!!

2001 Dodge Durango

2001 Chevrolet extended cab, 4x4.

LUXURY FOUR WHEEL DRIVE!!! 2012 Ford F150 platinum!!! Loaded with everything including heated or cooled tooshie!!! BEAUTY!!!! 2011 Ford F250 crew cab, Lariat, diesel, 4x4!!!!!

2002 Pontiac Grand Prix GT

Right Truck!!! Right Price!!! 2012 Dodge 1500 low miles.

2009 Ford F250 Lariat supercab, Power Stroke. Only 16,000 miles on this beautiful 2012 Ford Explorer XLT.

2003 Lincoln Town Car!!!!!!

One owner, non-smoker. 2007 Ford F350 Lariat crew cab, Power Stroke, automatic!!!!! GORGEOUS 2010 Ford F150 Platinum 4x4.

V-10 power in this 1999 Ford F250 crew cab, 4x4.

$895 Need I say more?

2005 Ford Expedition Eddie Bauer

1993 Ford F150 4x4

2010 Ford Fusion

2005 Ford F550 diesel. Haul the BIG LOADS!

2011 Ford Focus

2008 Ford Taurus Limited all wheel drive!!!!! One owner, non-smoker!!!!!

WHY PAY MORE? John Waller

David Kennedy

Josh Waller

Sabrina Pendleton

Clint Augare

Northern Ford Call 1-800-823-1234 or 1-406-873-5541 Cut Bank, MT See our used inventory at www.northernford.com