T A P M A T I C
1Gold
#
CUTTING FLUID The multi-purpose cutting fluid which replaces chlorinated solvents and can be used on all metals.
Increases tool life and improves surface finish
Great for all metals including aluminum
Does not contain chlorinated solvents or chlorinated paraffins
Reduces cutting torque and improves cutting efficiency
Does not contain water, solvents, or inactive fillers
Excellent for tapping applications
Requires less product usage than traditional cutting fluids
Meets USDA requirements for P1 Qualified to Boeing Specification BAC 5008
General Information LPS Tapmatic #1 Gold is great for all metals including aluminum. LPS Tapmatic #1 Gold simultaneously protects and lubricates to reduce friction and eliminate chip welding in tapping, drilling, reaming, and threading. #1 Gold contains EP additives to provide extra performance for increasing tool life and improving surface finish. #1 Gold does not contain chlorinated solvents, chlorinated paraffins, water, solvents or inactive fillers. #1 Gold is 100% active and requires less product usage than traditional cutting fluids. Using too much #1 Gold can hinder performance and cause smoking. #1 Gold is recommended for all machining operations including tapping, drilling, reaming, threading, turning, milling, and broaching. Material Safety Data Sheets are available upon request.
Properties Flash Point: >200°F (>93°C)
Specific Gravity: .896
Tapmatic #1 Gold Cutting Fluid is available in these sizes: 16 11 1 5 55
fl. oz. (0.473 liter) oz. (312 grams) aerosol gal. (3.78 liters) gal. (18.93 liters) gal. (208 liters)
40320 40312 40330 40340 40360
Appearance: Clear Gold Liquid
Odor: Fatty Oil/Spicy
Viscosity: 25-35 cps @ 72°F (22°C)
Typical applications where Tapmatic #1 Gold Cutting Fluid can be used: • • • •
Boring Broaching Drilling Engraving
• • • •
Facing Milling Reaming Sawing
• Tapping • Threading • Turning
LPS Laboratories • An Illinois Tool Works Company P.O. Box 105052 • 4647 Hugh Howell Road • Tucker, GA 30085-5052 U.S.A. TEL: (800) 241-8334 or (770) 934-7800 • FAX: (800) 543-1563 or (770) 493-9206 Internet Web Site: www.lpslabs.com ©2003 LPS Laboratories • LPS ® is a registered trademark of Illinois Tool Works • All Rights Reserved • Rev. 6/2003 • Form #X40304
C E R T I F I E D
ISO
9001
QUALITY MANAGEMENT SYSTEM