TradeZone caliper 137 apr may 2014 by TradeZone

Valid from 1st April to 31st May 2014 â&#x20AC;˘ VOL 137

CAUTION CONTAINS EXTREMELY HOT WELDING & CUTTING DEALS

WELDING & FABRICATION PROMOTION WIN the Xcel-Arc TIG200AC/DC Welder Package: To WIN simply buy any Esseti or Xcel-Arc product featured in pages 2 through 5 and complete an entry form to enter the nationwide draw, Value $3,400.00 See in store or www.tradezone.co.nz for details.

! L L A S E K A T R ARC E L E N C N X I G W ER MAZIN A LD N E A W N C I W C/D A 0 0 2 TIG

W W W. T R A D E Z O N E . C O . N Z

(North Island Stores Only)

Caliper #137.indd 1

S U P P L I E R S T O I N D U S T RY

(South Island Stores Only)

13/03/14 4:17 PM

500 amps of pure grunt

XA-MIG250D - Digital Control 250 AMP - 230V - 15KG SPOOL

XA-MIG500 AMP welder M.T.S MIG-tig-stick inverter

MIG, LIFT ARC DC TIG, STICK SPOOL GUN READY, VRD SAFETY

• Industrial 500 Amp Power Source • 10m Long Interconnecting Cables • Control Settings at the Wire Feeder • 4 Drive Roll Separate Wire Feeder • Digital Meters • Crater Current Setting • 2/4T Trigger Function • Trolley with Accessory Drawer Power Supply 415 -3 +/- 15% Wire Feeder Type Gear Driven 4 Roll Duty Cycle @ 40°c 40% @ 500Amps Current Range MIG 40A - 500 Amps Current Range MMA 20A - 500 Amps

Power Supply Duty Cycle @ 25°c Current Range MIG Current Range MMA Current Range TIG Rated Power Dimensions (LxWxH) Weight

GENUIS! DIGITAL TORCH REMOTE

C/w Mig Torch, Arc Set & Regulator TIG TORCH IS OPTIONAL & EXTRA

4,326 09

XA-MIG500SWF-SP

WARRANTY

Razorweld

MIG200rz MIG/MMA

200 AMP - 230V - 5KG SPOOL

MIG/STICK - Spool Gun Ready

• 200 Amp 230V • MIG Gas/Gasless • Spool Gun Ready • Hot Start Electrode • Takes 5Kg Spool • Light Weight Power Supply 230v - 1Ph Duty Cycle @ 25°c 45% @ 200A Current Range MIG 30 - 200A Current Range MMA 10- 200A Rated Power 7.0 KVA Dimensions (LxWxH) 470x190x380mm Weight 18kg XA-MIG200RZ-SP

1,390

$1,599.00 GST Incl.

Compliant to AS/NZ 60947 Standard

250a SINGLE PHASE MIG BEST PRICE! XA-MIG250MTS MIG

250AMP, 230VOLT 1 PHASE LIFT ARC DC TIG DIGITAL METERS, VRD SAFETY SPOOLGUN CONNECTION Power Supply Duty Cycle @ 25°c Current Range MIG Current Range MMA Rated Power Dimensions (LxWxH) Weight

Tig Torch is Optional and Extra

SUPER SHARP PRICE!

Tig Torch is Optional and Extra

$2,180.00 GST Incl.

XA MIG350mts

350AMP, 415VOLT 3 PHASE LIFT ARC DC TIG - STICK (MMA) DIGITAL METERS, VRD SAFETY SPOOLGUN CONNECTION Power Supply Duty Cycle @ 25°c Current Range MIG Current Range MMA Rated Power Dimensions (LxWxH) Weight

415v - 3Ph 70% @ 350A 30 - 350A 10- 350A 15 KVA 900x400x670mm 60kg

C/w Mig Torch, Arc Set & Regulator Tig Torch is Optional and Extra

2,739 13

$3,150.00 GST Incl.

XA-MIG350MTS-SP

PULSE MIG WELDER - MULTIFUNCTION - 230V

MIG - PULSE MIG - TWIN PULSE MIG - DC TIG - DC PULSE TIG TIG FINISH WELDS WITH MIG • 250 Amp 230V • Simple Operation • Synergic Double Pulse • High Speed Mig/Mag • DC Tig Synergic & Manual • MMA Synergic & Manual • Push Pull Gun Ready • Trolley with Drawer • 20-250 Amps • Weight 60Kg

5,216 52

$5,999.00 GST Incl.

1,734

V0066AA

xcel-arc suregrip

mig torches • High Quality • Superior Comfort • Euro Connection • Binzel Style Parts

$1,995.00 GST Incl. XA15-4

XA15 Mig Torch 180A x 4m

XA17V SUREGRIP TIG TORCH x 4m TIG SPARES PARTS KIT

XA25-4

XA25 Mig Torch 230A x 4m

XA24-4

XA24 Mig Torch 250A x 4m

$178.00 GST Incl.

XA-TK3

XA36-4

XA36 Mig Torch 320A x 4m

15478

WARRANTY

optional tig torch kit deal

Tig Torch is Optional and Extra

XA-MIG250MTS-SP

1,895 65

C/w Digital Mig Torch Arc Set & Regulator

With Mig Torch, Arc Set & Regulator

230v - 1Ph 60% @ 250A 30 - 250A 10- 250A 12 KVA 900x400x670mm 58kg

C/w 4m Mig Torch, Arc Set & Gauged Flow Regulator

XA-MIG250D-SP

XA260 Suregrip Digital Control Mig torch allows you to adjust wire feed speed and voltage settings during real time welding providing you the ultimate in control.

Compliant to AS/NZ 60947 Standard

$4,975.00 GST Incl.

230v - 1Ph 60% @ 250A 30 - 250A 10- 200A 10- 250A 10.8 KVA 620x290x500mm 35kg

$134.78 +GST $173.04 +GST $213.04+GST $278.26 +GST

$155.00 inc GST $199.00 inc GST $245.00 inc GST $320.00 inc GST

XA-TIG180P DC TIG/HF

xa-ARC170 SUPER DEAL !

INVERTER PULSE WELDER

Mma/tig dc iNVERTER welder

180AMP, 230VOLT SINGLE PHASE INDUSTRIAL DC TIG INVERTER

PERFORMANCE PROVEN! RELIABILTY CONFIRMED!

TIG -HF Arc Ignition - Stick (MMA) 2T/4T Trigger - Pulse Select 24 MONTH Down Slope - Post Gas Machine Warranty Remote Amp Control Select Compliant to AS/NZ 60947 Standard

Compliant to AS/NZ 60947 Standard • 170 Amp 230V, • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 60% Duty Cycle • 10 -170 Amps • Weighs 5.2 Kg • Generator Compatible

PACKAGE DEAL:

XA TIG180PR Machine XA17x8m Torch + Spares Earth Lead & Arc Lead Argon Flowmeter

C/w - Arc Set 4m, Carry Case Tig Torch is optional and extra

514

1,347 83

WELDERS T-SHIRT

$592.00 GST Incl.

XA-ARC170-SP

XA-TIG180PR-SP

xa-ARC200 mma/tig dc iNVERTER 200A DC MMA/TIG

24 MONTH Machine Warranty

AS/NZ 60947 Standard Compliant

C/w Arc Set x 4m

Tig Torch is Optional & Extra

bonus packet 3.2 xagp electrodes !

Power Supply Duty Cycle @ 25°c Current Range TIG AC Current Range TIG DC Current Range MMA Rated Power Weight Dimensions (LxWxH)

66957

$770.00 GST Incl.

DIGITAL! MULTIWAVE TIG AC/DC 200A the best 230v - 200 amp tig acdc on the PLANET MULTI WAVE-the most innovative power source system specifically developed for Tig AC/DC. The welding performance is enhanced solely to the new advanced “MULTI WAVE” welding technological development

Industrial 200Amp 230v Stick Electrode (MMA) Lift Arc DC Tig • On/Off VRD Select • Electrode Hot Start • Adjustable Arc Force • Tig Lift Arc - Soft Start • 50% Duty Cycle • 10 -200 Amps • Weighs 8.2 Kg • Generator Compatible

XA-ARC200-SP

New Generation Technology

Razorweld

3,652 17

$4,200.00 GST Incl.

V0095AA-SP

MULTI WAVE ADVANTAGE

AC/DC WELDING LIKE YOU’VE NEVER HAD BEFORE

New Generation Technology

INDUSTRIAL 40KHz INVERTER

Razorweld

200AMP - 230V SINGLE PHASE Full Function Digital Control

XA-TIG200 DIGITAL AC/DC 200 AMP INVERTER

New digital function

• DC TIG HF Arc Ignition • Pulse Frequency 0.5 - 200Hz • Peak & Base Current Control • Pulse Width Adjustment 24 MONTH Machine Warranty • 2T/4T Trigger, Spot Time • Start & Final Current Control • Pre & Post Gas Flow Control • Up & Down Slope Control • MMA Arc Ignition Control • MMA Arc Force Control • Approved AS/NZ 60947 Standard 230v - 1Ph 45% @ 200A 05 - 200A 10- 160A 7.0 KVA 400x150x260 9kg

230V +/- 15% 80% @200 Amps 10A - 200 Amps 05A - 200 Amps 20A - 160 Amps 5.4 KVA 18 Kg 310x430x550mm

• MIX AC welding for thicker material and higher speed. • MIX DC innovative system allows welding gaps without filler material.

DIGITAL TIG 200A DC Pulse

Power Supply Duty Cycle @ 25°c Current Range TIG Current Range MMA Rated Power Dimensions (mm) Weight

WIDE VIEW HELMET

$1,550.00 GST Incl.

• AC/DC TIG HF Arc Ignition • AC Square Wave Balance Control • Pulse Frequency 0.5 - 200Hz • Peak & Base Current Control • Pulse Width Adjustment • 2T/4T Trigger, Spot Time • Start & Final Current Control • Pre & Post Gas Flow Control • Up & Down Slope Control 24 MONTH • MMA Arc Ignition Control Machine Warranty • MMA Arc Force Control • Approved AS/NZ 60947 Standard

2,604 35

$ XA-TIG200PRZ-SP

C/w XA26 x 8m Tig Torch, Earth Lead 4m, Arc Lead 4m Twin Flow Argon Regulator, Machine & Gear Carry Bag

1,552 17

$1,785.00 GST Incl.

$2,995.00 GST Incl.

XA-TIG200RZ ACDC-SP

LIMITED INTRODUCTORY OFFER!

C/w XA26Tig Torch 4m Arc Lead Set & Regulator

New Generation Technology A Cut Above The Rest

PLASMA CUTTER 230v

CUTS 15mm Steel - SEVERS 25mm Steel

24 MONTH Machine Warranty

40 Amp - 230V 1 Phase 30% Duty Cycle @ 40°C PFC - Power Factor Correction CNC Compatible Weight 12.2Kg Quality Torch Industrial Quality Approved AS/NZ 60947 Standard

C/w Plasma Torch Torch Spares Kit & Earth Lead

1,252

$ XA-CUT40RZ-SP

$1,440.00 GST Incl.

AS4000W WIDE SCREEN HELMET BIG 100mm x 60mm VISION AREA GRIND MODE FUNCTION

$299.00 GST Incl.

WIDE SCREEN

WELDERS T-SHIRT

XA-CUT55-SP

C/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator

SUPER SHARP PRICE!

$2,470.00 GST Incl.

2,147 83

industrial inverter plasma cutter high performance 105 amp • Industrial 3 Phase 415V • Euro Connection Torch • HF Start • 30mm Maximum Cut • European Plasma Torch • Portable - 30kg

C/w - Plasma Torch, Spares Kit Earth Lead, Air Regulator

AS4000W-SP

• Arc Welding • Mig Welding • Tig Welding • Plasma Cutting • Gas Welding For Confined Spaces, Inspection, Tank Work, Pipe Welding, Military, Remote & Mobile Welding, Ideal for Hard Hat situations. Available in Blue, Silver & Bronze

3,252 17

MASSIVE SAVING

$3,740.00 GST Incl.

BEST PERFORMANCE AND RELIABILITY High Quality 2 Independent Sensors Solar Cell Powered Adjustable Shade 9-13 Adjustable Sensitivity Adjustable Delay to Clear

CRAZY NG AMAZIE! C I PR

11739

$ WARRANTY

0.05ms 2 x Independent 5-7-9-11-13 Adjustable Adjustable Battery, Solar Cells -10°C to 55°C ANSI Z87.1 / DIN 12 months

$135.00 GST Incl.

AS3000F

HEAT REFLECTIVE HEAVY DUTY WELDING GLOVES

New! p li a F ce Cld ie h S

34348

$395.00 GST Incl.

WLSIL-SP

ONCE YOU USE THEM G.D.S ULTIMATE WARNING! YOU’LL BE HOOKED. TIG GLOVE WARNING!

Full Aluminised PFR Rayon heat reflective forehand giving prolonged, superior radiant heat protection during welding. The aluminised Herringbone pattern reflects 95% of radiant heat allowing you make longer better quality welds. The unique 3 dimensional finger construction offers unrestricted mobility and sensitivity of fingers, the glove construction pattern offers an excellent fit and the materials used are specially processed for superior pliability.

3043 PAIR

$35.00 GST Incl.

XA-10-2755-L XA-10-2755-XL

XA Heat Reflective Glove - L XA Heat Reflective Glove - XL

XCEL-ARC ANTI SPATTER

Developed by a Welder for TIG welding. Constructed out of 3 types of leather -“deer skin” palm for excellent finger tip sensitivity “goat skin” back for dexterity and heat protection & cowhide cuff for durable wrist & forearm protection. 100% Kevlar stitched for strength & better protection against seam burn out. PAIR

Special Formulation Allows Surface Painting After Use

XA-10-1027-L XA-10-1027-XL

400g Aerosol Can

GDS Tig Welding Gloves-Large GDS Tig Welding Gloves-X Large

XA-CUT105-SP

AUTOWELD AS3000F HELMET

WARRANTY

AMAZING! AUTOMATIC WELDING GOGGLES

Heavy Duty TECMO 100 Amp Plasma Torch with Spares

$1,000.00

HIGH QUALITY - TIG OPERABLE - ANSI Z87.1 APPROVED

Technical Data Reaction Time Sensors Shade: Sensitivity Delay Control Power Supply Operating Temp Standards Warranty

• Industrial 3 Phase 415V • Euro Connection Torch • HF Start • 20mm Maximum Cut • European Plasma Torch • Portable - 21kg

Heavy Duty SUREGRIP 150A Plasma Torch with Spares

4 Sensors Shade 9-13 Delay to Dark Timer Sensitivity Adjustment Solar Powered Battery Grind Warning Flash Low Amp Tig Capable

26000

industrial inverter plasma cutter high performance 55 amp

xa-CUT105 AIR PLASMA CUTTER - 30mm cut

new improved model with P.F.C

xa-CUT55 AIR PLASMA CUTTER - 20mm cut

20 00

$23.00 GST Incl.

Silicon Free - Benzene Free Non - Flammable - CFC Free

XA1390/S

$ 39 $8.50 GST Incl.

XCEL- GAS

INDUSTRIAL GAS REGULATORS

Xcel-Gas regulators are reliable affordable high performance regulators independently tested and compliant to AS4267

XCEL- GAS

LPG - XG-LPGRG

OXYGEN - XG-OXYLG

ACETYLENE - XG-ACELG

80 00

$92.00 GST Incl.

GENERAL PUrPOSE ELECTRODES

• All Positions • Welds Galvanised Steel • Excellent Finish • Site Welding • Smooth Arc • Self Lifting Slag • Great Price

Inclusive

XAGP Electrode 3.2mm x 5.0kg Pkt

+GST $18.26 $18.26 $27.83

XAGP Electrode 4.0mm x 5.0kg Pkt

$26.96

$31.00

Code

Product Description

XAGP25

XAGP Electrode 2.5mm x 2.5kg Pkt

XAGP32-25

XAGP Electrode 3.2mm x 2.5kg Pkt

XAGP32 XAGP40

$21.00 $21.00 $32.00

GASLESS MIG WIRE

XAE71TGS0845

95 65

XAE71TGS0945

0.9mm x 4.54kg Spool

$103.00 GST Incl.

86 09

$99.00 GST Incl.

5356 x 1.2mm Al Mig Wire x 0.45kg

XA531020

5356 x 1.0mm Al Mig Wire x 2.0kg

$50.43

XA531220

5356 x 1.2mm Al Mig Wire x 2.0kg

$47.83

5356 x 1.0mm Al Mig Wire x 0.45kg

XA531205

XC-71212

1.2mm x 15kg Spool

Inclusive

2.4mm

+GST $16.96 $ 34.78

Zirconiated

2.4mm

$ 34.78

$40.00

Zirconiated

3.2mm

$ 72.17

$83.00

Part No.

Inclusive

XA531005

• Smooth Arc Transfer • Low Spatter • Fast Freezing Slag • All Position Welding • Smooth Bead Finish • CO² & Mixed Gas • International Approvals

SUPERIOR ELEMENT MIX SUPER FINE GRAIN STRUCTURE SEAMLESS EXTRUSION GROUND POLISHED FINISH

+GST $13.04 $12.61 $12.00

5356 x 0.8mm Al Mig Wire x 0.45kg

E71T-1 FLUX CORE MIG WIRE Precision Layer Wound - Vacuum Sealed

tungsten electrodes

High Quality • Triple Shaved • X-Ray quality Precision Layer Wound • Smooth Feeding Low Fume Factor • Clean Welds • Approvals AWS, ABS, CWB, Lloyds, DNV, TUV, DB

XA530805

$560.00 GST Incl.

GAS shielded flux-cored MIG WIRE XC-712 x 1.2mm x 15kg Spool

XAE71T111245

TRIPLE DIAMOND SHAVED PRECISION LAYER WOUND

Product Description

48696

AMAZING PRICE

XG-GSK-A1 (ACETYLENE) - XG-GSK-LPG1 (LPG)

1.2mm x 4.54kg Spool

89 57

Code

INCLUDES REGULATOR FLASH BACK ARRESTORS

Manufactured & Compliant to AS/NZ4267 Standard

56 52

aLUMINIUM MIG WIRE • • • •

1 x Heavy Duty Tool Box 1 x 10 Metre Twin Line Hose Set 1 x Oxygen Regulator 1 x Acetylene or LPG Regulator 1 x Blow Pipe Handle 1 x Cutting Attachment 3 x Cutting Nozzles 1 x Mixer & 3 x Weld / Braze Tips 1 x Heating Tip Acetylene Only 1 x Oxygen Flash Back Arrestor 1 x Fuel Gas Flash Back Arrestor 1 x Combination Spanner 1 x Radius Bar and Pivot 1 x Roller Guide & Tip Cleaner Set 1 x Welding / Cutting Goggles

$65.00 GST Incl.

$110.00 GST Incl.

INDUSTRIAL CUTTING WELDING & BRAZING SETS

FLUX CORED GASLESS WIRE GREAT FOR OUTDOOR USE SMOOTH STABLE ARC

0.8mm x 4.54kg Spool

oxygen acetylene and LPG gas sets

$15.00 $14.50

Type

10pc Pkt

WT20-16-175

Thoriated

1.6mm

WT20-24-175

Thoriated

WZ8-24-175 WZ8-32-175

$40.00

stainless steel tig wire 316LSi ID STAMPED BOTH ENDS - INTERNATIONAL APPROVALS

Code

Size x 5Kg

XA316LSI-10T

1.0mm

XA316LSI-16T

$58.00

1.6mm

XA316LSI-20T

2.0mm

$55.00

XA316LSI-24T

2.4mm

$13.80

$19.50

+GST $137.39 $ 105.22 $ 113.04 $ 113.04

Inclusive $158.00 $121.00 $130.00 $130.00

No.8 SOLID MIG WELDING WIRE

PRECISION LEVEL LAYER WOUND E-70S-6 -TRIPLE DE-OXIDISED

No.8 WIRE

Precision Level Layer Wound • Triple De-oxidised • X-Ray Quality Smooth Feeding • Clean Weld Finish • International Approvals XAN80605

0.6mm x 5.0kg

34 78

$40.00 GST Incl.

XAN80805 XAN80905

0.8mm x 5.0kg 0.9mm x 5.0kg

25 22

$29.00 GST Incl.

XAN80815 XAN80915

0.8mm x 15.0kg 0.9mm x 15.0kg

45 22

$52.00 GST Incl.

No.8 WIRE XAN81015 XAN81215

1.0mm x 15.0kg 1.2mm x 15.0kg

43 48

$50.00 GST Incl.

GO-SPECS II WELDING SHaDe 5 LENS GG-45WS5AF

WELDING BLANKET

Soft closed cell foam fills gaps between face and lens. Choose between a strap or sidearms. Flame retardant foam and strap. Supercoat™, antifog lenses.

WB6636-5180

Carbonized Acrylic felt welding blanket – great for use in the automotive industry. Protects cars windows and metal from fling sparks. Wilsons Panther felt pads are fire and heat resistant, made of carbon fibre, this welding felt is designed to withstand temperatures of up to 1648 degrees C. 1800 x 1800mm.

164 35

23 48

BACK HAND PAD

$189.00 GST Incl.

$27.00 GST Incl.

WELDING CURTAIN RED WC-6636-25

Maintains good visibility in and out of welding booths while minimising the arc glare. 1800 x 1800.

70 43

$81.00 GST Incl.

BACK HAND PAD

TIG WELDING GLOVEs W-TIG

Full pigskin palm. Split pigskin cuff. 300mm long

$ 13 $10.50 GST Incl.

welders FIRST AID KIT FAK209116

Unitized boxes for easy identification and refill.

60 00

$69.00 GST Incl.

disposable masks P2 JS-823MLB

Good disposable option provide protection against welding fumes and odour. Exhalation valve provides greater wearer comfort. The construction of the mask provides good fit and protection and will not lose shape. Box of 10.

Electrical Leads

2.5mm cable, Limited voltage drop. EL10A30

10amp. 30m.

110 43

$44.80 GST Incl.

Cutting Discs Inox

Dual Adhesive System

For cutting stainless steel rust and acid proofed steels, hardox, hardened steels, high alloyed steels, high tensile steels, galvanized parts. Made in Germany.

Code

Model

DISC-XT10-100

100 x 1.0 x 16mm

DISC-XT10-115

115 x 1.0 x 22.23mm

DISC-XT10-125

125 x 1.0 x 22.23mm

DISC-XT10-180

180 x 1.5 x 22.23mm

DISC-XT10-230

230 x 1.9 x 22.23mm

+GST $2.17 $2.35 $2.61 $3.91 $4.43

6121705

Inclusive $2.50 $2.70 $3.00 $4.50 $5.10

Repair most anything. Bonds plastics, metals, and rubber in seconds. Fills cracks, gaps and holes. Will not dry out in bottle, guaranteed for 12 months.

36 00

$41.40 GST Incl.

EL15A30

15amp. 30m.

110 43

$127.00 GST Incl.

PURCHASE one of these + one of these = Cordless Drill Driver 18v DS18DSDL(GJ)

Massive 92Nm of Brutal Power!! Comes with 2 x 5.0Ah Li-ion Batteries. Ultra high capacity for unrivalled run time.

599 13

$689.00 GST Incl.

Cordless Impact Drill 18v [Bare Tool]

FREE

WR18DSHLNN

Max torque: 480Nm. Convenient rocker switch for forward/reverse. Variable speed and reverse. Ultra-bright LED light to illuminate work area.

5.0Ah Li-Ion Battery

369 57

$425.00 GST Incl.

18v Pro Series High Torque Twin Pack KC18DSDL(GB)

18V Cordless Angle Grinder [Bare Tool]

Includes Pro Series Driver Drill. Pro Series Impact Driver & 2 x 5.0Ah Li-ion Batteries. Ultra high capacity for unrivalled run time.

[Via Redemption]

G18DSLNN

New from Hitachi, this brilliant cordless grinder has all the features of a conventional electric grinder with the added benefit of portability where access to power is limited. $243.00 GST Incl.

748 70

21130

$861.00 GST Incl.

Cut Off Saw

ANGLE GRINDER

CC14SF

Angle Grinder 125mm

Heat resistant, high powered 730w motor. Strong alloy gearbox.

Full Spec, 125mm Electronic Safety Angle Grinder. 1500w motor with full range of electronic protection features & paddle switch.

G13SR3

116

$134.00 GST Incl.

G13YC2

338

2000w motor, quick release vice, spindle lock, capable of cutting shaped steel up to 130 x 130mm.

373 04

$429.00 GST Incl.

$389.00 GST Incl.

Heavy Duty Drill 13mm D13VB3

2 speed variable and reversible, 790w motor

247 83

$ Angle Grinder 125mm G13SB3

Super heavy duty 1300w. This high powered, compact angle grinder offers superior performance in a small package. Ideal for heavy duty workshop use where one handed operation is a requirement.

198 26

Angle Grinder 230mm

$285.00 GST Incl.

G23MR

2400w motor. Cybernetic body features super-tough alloy outer casing with a double insulating polycarbonate layer on the inside. This provides excellent heat dissipation antivibration 3 position side handle reduces strain on the operator.

323 48

$228.00 GST Incl.

$372.00 GST Incl.

Die Grinder GP3V

Variable speed, 7000 - 29000rpm. 705w motor.

425 22

$489.00 GST Incl.

Angle Grinder 125mm

1400w. Super Joint System II developed for effective vibration absorption. Electronic current limiter, speed control and soft start. Anti-restart function. Re-designed durable gear housing. Ergonomically best possible barrel grip.

1100w. Paddle” SwitchSlim ergonomical design. Heavy duty gearbox. SJS system protects operator if tool is jammed in workpiece.

GA5040C

9565P

249 57

186 96

$287.00 GST Incl.

$215.00 GST Incl.

Sander Polisher 180mm

Abrasive Cut Off Saw 355mm

Electronic speed control maintains constant speed under load, critical for a professional finish. Fast and powerful for clear coat finishes. Variable speed with preset stepped speed dial, ideal for ultra slow polishing. Hook and loop for quick paper change.

Can cut round 100mm diameter, square 100 x 100mm, rectangle 130 x 105mm.

9227CB

ACS356

423 48

260 00

$487.00 GST Incl.

$299.00 GST Incl.

Inox Thin Cut Off Wheels

Angle Grinders 850w

Suitable for cutting mild steel

Slim motor housing for optimum handling. Die cast aluminium gear housing for strength and heat dissipation.

Code

Model

SR9100

100 x 1.0 x 16mm

SR9102

100 x 1.6 x 16mm

SR9115

115 x 1.0 x 22mm

SR9116

115 x 1.6 x 22mm

SR9125

125 x 1.0 x 22mm

SR9126

125 x 1.6 x 22mm

$142.00 GST Incl.

SR9180

180 x 1.6 x 22mm

SR9230

230 x 1.9 x 22mm

W85-115

115mm

123 48

W85-125

125mm

129

$149.00 GST Incl.

Simple Green 3.78L

+GST $1.48 $1.48 $1.57 $1.57 $1.57 $1.57 $3.04 $3.48

Inclusive

+GST $6.00 $8.52 $11.57

Inclusive

+GST $1.48 $1.52 $1.57 $2.57 $3.48

Inclusive

+GST $2.09 $2.26 $2.43 $3.74 $5.57

Inclusive

$1.70 $1.70 $1.80 $1.80 $1.80 $1.80 $3.50 $4.00

Large Cut Off Wheels Code

Model

SR5300

300 x 2.8 x 25.4mm

SR5350

350 x 3.0 x 25.4mm

SR5400

400 x 3.2 x 25.4mm

$6.90 $9.80 $13.30

GP Cut Off Wheel

SG13052

The ultimate non toxic, biodegradable cleaner, degreaser. Comes with a 946ml spray bottle.

2200 Watt

Stainless Steel Cleaner 473ml

Code

Model

SR4100

100 x 2.4 x 16mm

SR4115

This ready-to-use, high-tech formula was created to clean stainless steel surfaces of smudges, streaks, fingerprints, and water stains and protects from spills and daily wear-and-tear.

115 x 2.4 x 22mm

SR4125

125 x 2.4 x 22mm

SR4180

180 x 2.5 x 22mm

SR4230

230 x 3.0 x 22mm

SG18303

33 91

$39.00 GST Incl.

14 70

$16.90 GST Incl.

$1.70 $1.75 $1.80 $2.95 $4.00

Inox DC Wheels Code

Model

SR3100

100 x 6 x 16mm

SR3115

115 x 6 x 22mm

SR3125

125 x 6 x 22mm

SR3180

180 x 7 x 22mm

SR3230

230 X 7 X 22mm

$2.40 $2.60 $2.80 $4.30 $6.40

Big Wipes Industrial 80 pack 66 2020

One Wipe shifts the lot. Effortlessly clean paint (Oil, water and hammer finish), adhesives, silicone, epoxy, PU Foam, oil, grease and more from hands, tools and surfaces.

$24.90 GST Incl.

Flap Disc Fibre Back 60 grit

Fibre backing prevents harsh grinding into workpiece Code

Model

GAFA10016060

100 x 16mm

GAFA11522060

115 x 22mm

GAFA12722060

127 x 22mm

+GST $8.61 $10.35 $11.22

Inclusive $9.90 $11.90 $12.90

ZINC IT

Bright Zinc

A quick drying zinc-rich coating for metal protection where a bright galvanized finish is required. More than 50% highest purity zinc in the dried film. NZFSA Approved C23.

A quick-drying zinc-rich coating that offers similar advantages to hot-dip galvanizing. 95% highest purity zinc in the dried film. NZFSA Approved C23. 2085

Zinc It 350gm

16 70

$19.20 GST Incl.

2185

Zinc It 1 Litre

2087

60 00

Bright Zinc 400ml

14 87

$69.00 GST Incl.

5007

Lubricates moving parts for smooth action. Comes with applicator. Breaks through rust and corrosion. Displaces water from wet equipment. Protective film for ongoing corrosion protection. Complete with applicator. NZFSA Approved C14.

46 00

$27.10 GST Incl.

Red Oxide Primer 400ml

Contains release agents to prevent welding spatter from permanently adhering to metal. NZFSA Approved C12.

For long term protection of structural steel and iron. High levels of anticorrosive zinc components. NZFSA Approved C23.

2091

12 00

$11.90 GST Incl.

$13.80 GST Incl.

Copper Anti-Seize & Lubricating Compound

A unique fast drying coating formulated to stop rust instantly and prevent future rusting. NZFSA Approved C23.

23 57

Weld Anti-Spatter 400ml

10 35

Rust Converter

$61.00 GST Incl.

$52.90 GST Incl.

14610

53 04

3358

1 Litre

Bright Zinc 1 Litre

$17.10 GST Incl.

5.56 4 Litre

18418

2187

Safe for use on both ferrous and non-ferrous metals. Protects parts up to 982° C. Does not compromise integrity of soft metals. Heat aging won’t affect lubricity of product. NZFSA Approval C12.

425g Aerosol

12 17

$14.00 GST Incl.

3145

75ml Tube

3183

28 61

$ 87 $7.90 GST Incl.

500ml Tin

$32.90 GST Incl.

For all metal surface types. It provides a brilliant high gloss finish. Removes dirt and surface rust in a single treatment leaving a protective coating.

$24.40 GST Incl.

Copper-free formulation - For all metals, especially stainless steel. Protects fasteners and metal surfaces from seizing and galling. High temperature resistance Protects parts up to +1315°C. NZFSA Approved C12.

26 00

3147

75ml Tube

3193

$ 22 $10.60 GST Incl.

Stainless Steel Polish 75ml

Nickel Anti-seize & Lubricating Compound

POLM-1035

$29.90 GST Incl.

400ml Aerosol

21 22

Metal Polish 265ml

BONUS POLISH PAD

3195

500ml Tin

40 78

$46.90 GST Incl.

3197

400ml Aerosol

23 91

$27.50 GST Incl.

Flaw Finder Kit

POLS-075

Y642543

Designed to shine polished stainless steel to an extremely high lustre without scratching.

3 step process cleaner, dye & developer kit for detecting cracks in welded joints & engineering components. NZFSA & AsureQuality Approved.

$ 96 $10.30 GST Incl.

67 57

$77.70 GST Incl.

Wire Brushes Twist Knot 65mm

Wire Wheels

High performance cable crimped wire, provides a 50% longer lasting brush. WHEW-1505

WHEW-2005

150 x 20mm

Code

Model

BRUH-6510

M10 Multi Fit

BRUH-6514

M14 x 2

+GST $22.52 $22.52

Inclusive $25.90 $25.90

200 x 20mm

27 83

42 17

Crimped Wire 75mm

$32.00 GST Incl.

$48.50 GST Incl.

Welding & Cutting Kit Oxy/Acetylene

Code

Model

BRUH-7510

M10 Multi Fit

BRUH-7514

M14 x 2

+GST $24.26 $24.26

Inclusive $27.90 $27.90

Scratch Brushes

WCD9011PA

Welds to 10mm (size 20 tip) and cuts to 150mm. Comes with flashback arrestors.

Welding & Cutting Kit LPG

With plastic Handles 224324 Steel 28 gauge wire.

$ 61 $5.30 GST Incl.

WCD9011LP

Comes with flashback arrestors.

316 Stainless Steel

225223

346 96 EA

10 87

$399.00 GST Incl.

$12.50 GST Incl.

platform broom

Bevel Brush 115mm

Dense java fill 1.35m handle. 450mm wide.

M14 x 2. Designed with a max rpm of 12,000.

786518

28505055

MINI HEARTH BRUSH

24 26

20 78

$27.90 GST Incl.

100mm BEVEL BRUSH

$23.90 GST Incl.

Magnet Square MAGS-MS45

Unbreakable G Clamps

111 x 95 x 19mm. 30kg pull force.

Made from UNBREAKABLE SG Iron. Deep threads give smooth, slip free operation. CLAG-SG205

205mm

25 22

$29.00 GST Incl.

25 22

CLAG-SG245

245mm

36 52

$42.00 GST Incl.

CLAG-SG305

305mm

$29.00 GST Incl.

43 39

$49.90 GST Incl.

Welding Magnets

Magnetic blocks used when welding sheet metal and pipes etc. For welding and mounting work at 90° or 45° angles. Intended for both flat and round work pieces. MH75

120 x 82mm

10 35

$11.90 GST Incl.

Mini Multi Angle Magnet MAGM-MS346AT

59 x 51 x 16mm. 10kg pull. Holding at multiple angles while soldering, brazing and welding at 30°, 45°, 60° and 90°.

MH75

MH90

120 x 100mm

18 70

$21.50 GST Incl.

MH90

19 13

$22.00 GST Incl.

Unbreakable Vices Welding Table TABW-TS3020

760 x 510mm. Corner guides for easy set up.

173

$199.00 GST Incl.

Vise Grips 150mm

125mm

VICB-MSG06

159 13

199 13

$183.00 GST Incl.

$229.00 GST Incl.

G-Clamps

Frames are stressed and shaped to absorb tensions and compressions well within the limit from the material from which they are made. Code

Model

T120/6

150mm

T120/8

200mm

T120/10

250mm

T120/4

100mm

T120/12

300mm

+GST $27.83 $39.13 $56.52 $20.52 $84.00

26 00

T6SP

$32.00 $45.00 $65.00 $23.60 $96.60

C Clamp with Swivel Pads

$29.90 GST Incl.

28 52

$32.80 GST Incl.

Includes 2 x 275mm Welding Clamps, 2 x 150mm Welding Clamps 1 x 250mm standard Vise Grip.

182 61

Vise Grips 275mm

VISE-GRIP T SHIRT

locking pliers

T11R

T11SP

C Clamp with Swivel Pads

$48.00 GST Incl.

Standard

24 00

45 22

$52.00 GST Incl.

406

275mm C Clamp

Vise Grip 75mm T7CR

Inclusive

T544T

$210.00 GST Incl.

Standard C Clamp

150mm

Locking Plier Pack

T6R

Standard C Clamp

Unbreakable SG Iron VICB-MSG05

$26.00 GST Incl.

406SP

C Clamp with Swivel Pads

26 96

$31.00 GST Incl.

Switchable Magnetic Holder

$27.60 GST Incl.

TQ8027

Heavy duty design. Super strong magnet (on/off switch). Suitable for straight, 90deg, 45deg & curved steel.

Vise Grip Set 3pc T323S

Contains 150mm long nose. 175 & 250mm standard vise grips.

52 09

5130

$59.90 GST Incl.

$59.00 GST Incl.

Magnetic Base Drill

920w motor. Weighs just 10kg. Capacity of 35mm diameter & 52mm depth of cut.

Featuring an 1020w Motor, Powerful Dual Coil Magnet, Capacity of 40mm Diameter & 52mm Depth of Cut. The ability to easily accept twist drills up to 13mm using the optional chuck & adaptor.

HMPR035

1,303 48

HMPR040

1,738 26

$1,499.00 GST Incl.

$1,999.00 GST Incl.

Magnetic Sweeper 610mm

TQ1167

Pick up metal shavings & other ferrous objects up to 14Kg.

86 09

$99.00 GST Incl.

HOT PRICE

self Locking Pliers

Automatically lock on any size without adjusting. 15% thinner handle for easier grip and more power. No pinch easy squeeze release lever stays locked until you release it. Set & Forget” Set desired clamp pressure, from slight to extreme and jaws. Automatically adjust to any size with equal grip pressure.

Welding cart TQ6030

120 87

Sturdy Steel Construction. Ideal for Arc/Mig Welders and Gas Bottle. Top Tray – 500(L) x 320(W)mm. Bottom Tray – 660(L) x 320(W)mm

$139.00 GST Incl.

NOGA EDGE OFF

Multi Purpose Mig Pliers

NOGA EDGE OFF

TQ9058

Specifically designed for CO2 Welding Torches. 200mm, spring loaded with vinyl handle.

SPE1487

Locking Plier 250mm

17 30

40 87

SPE1488

Locking Plier C Clamp 275mm

54 78

$19.90 GST Incl.

$47.00 GST Incl.

Trade Hacksaw

Welding Vice 125mm

Robust frame Blade can be locked at 55° or the conventional 90° position. Blade storage section.

Fits all shapes and sizes of steel for right angle welding. Copper thread for conductivity.

$63.00 GST Incl.

WVF125

225-PLUS

34 70

103 48

$39.90 GST Incl.

$119.00 GST Incl.

Trade Hacksaw 325

Centred blade for correct balance and spring tensioned blade loading mechanism for quick blade changes.

Jumbo Pry Bar 780mm 301070

Made from alloy steel and comes with a hand grip.

$59.00 GST Incl.

Welders Chipping Hammers

$59.00 GST Incl.

Sturdy, alloy steel are heat treated for long life. Come with a tough plastic handle. MA37002

12oz

$33.00 GST Incl.

MA37003

2484/S4

With sizes 200, 300, 450, 600mm.

33 91

$39.00 GST Incl.

301673

Chrome vanadium steel fully hardened and heat treated. 150, 300, 400, 500mm.

75 65

16oz

$87.00 GST Incl.

$35.00 GST Incl.

Adjustable Pry Bar PRybar Set 4pc

Pry Bar Set Rolled Head

51 30

301186

Adjusts 540 - 810mm. Podger end designed for aligning and prying.

GREAT VALUE

60 00

$69.00 GST Incl.

Flexible Rule 600mm

Tradesman Radio

321901

UT-1000

You can bend this right around so that the ends touch making it ideal for measuring round bar stock. Graduations on both upper and lower edges with numerical markings in centre only. Made in Japan!

39 13

$45.00 GST Incl.

Torpedo Level LS164-3

With three perpendicular beams, and four vials at 45°, 90° and 180° (2 vials). This level has a v groove magnetic base for attaching to pipe or flat steel, and a levelling plate for use on flat surfaces.

128 00

$147.20 GST Incl.

SPLASH PROOF AM-FM RADIO 12 VOLT / 9 WATT RMS. AM/FM analog radio. Water resistant. Built Trade Tuff. Function switch power off/radio/AUX. High sensitivity, excellent sound performance. Built-in AC power cord (2.25 mtr). 12V DC jack. Can be powered by D size batteries.

126 09

$145.00 GST Incl.

Auto Lock Tape measure 8m

Digital Inclinometer 150mm

TA3785

LS160

With a pipe groove and magnetic base. Accurate to +/- 0.1 degrees. Audible alarm which beeps faster as you get closer to horizontal becoming a continuous tone. Measures in degrees and percentage.

25mm wide. Features bottom lock for easy blade contol.

138 26

11 22

$159.00 GST Incl.

$12.90 GST Incl.

$68.50 GST Incl.

Torpedo Laser LS164-1

With a laser dot/vertical/horizontal line. Adjustable bubble for recalibration, magnetic base and soft bag. Accuracy 1 mm in 5 meters.

Tape Measures

Grip holds on this model. All metallic components are made from Stainless Steel. Nylon coated blade. 5m x 19mm

TA3375

25 22

33 91

$ Condor Levels

Proguard finish delivers superior corrosion protection. OPTI-VISION Red horizontal vial creates highly visible red bubble edges, for exact placement between the reading lines and optimal vision in low light.

$29.00 GST Incl. KL905-120

1200mm

60 00

$69.00 GST Incl.

KL905-180

8m x 25mm

TA3380

HOT PRICE

$39.00 GST Incl.

1800mm

82 61

$95.00 GST Incl.

Sand Blasting Cabinet TQ3009

Bench Top Model with Top Opening Door. 4 Ceramic Nozzle Tips - 4.5, 5.0, 6.0 & 7.0mm (ID). Additional Transparent Shields. CFM 5 @ 80 psi (Optimum Operating). Complete with Gun, Gloves, Thread Tape. Dimensions 520(H) x 640(L) x 510(W)mm.

282

$325.00 GST Incl.

16 43

$18.90 GST Incl.

Toolbox Level 250mm

KL724

Accuracy: 0.5mm/m. Two solid acrylic shockproof vials

Ventilation Fan TQ1025

300mm diameter. 520 watt, 5 meter flexible tube. Air delivery - 60/70 M3 Min. Ideal for welding, workshops, basement ventalation.

433 91

$499.00 GST Incl.

Flood Light Tripod 160LED

Worklight 20w epistar

600 Lumens. 2 - 3 Hours work time. Fold out tripod. 3 metre cable. 240V power & charger. Rechargeabale lithium battery - 7.4V 220mah. qest@ LED Lights feature impact resistant casing that is dust and splash proof (IP44). 5mm white LED’s giving up to 100,000 hours life. Unlike Halogens LED work lights remain cool to touch with no heat generated. Full compliance to AS/NZ Electrical Standards.

1600 Lumens. LP44 rated (dustproof, waterproof, splashproof). Adjustable light angle – vertically & horizontally. 7.4V 8800mah rechargeable lithium battery.

Q1197

Q1148

260 00

$299.00 GST Incl.

243 48

Gas Torch Kit

$280.00 GST Incl.

GAST-TS4000TK

Suitable for Propylene & Propane fuel. Lock button keeps torch lit for finger free use. Instant on/off trigger igniter with simple one-handed operation. Cast aluminium body for durability.

119 13

$137.00 GST Incl.

Swivel Blow Torch Kit JP211056

360° Hands Free Swivel Arm with Auto Ignition. Disposable MAP/PRO™ Cartridge 399g. Solders 3.18 to 76 mm (1/8 - 3 ”) Copper Pipe. Brazes 1.5 to 25.4 mm (1/16 - 1 ”) Copper Pipe.

$113.90 GST Incl.

Blow Torch Kit JP211334

With pinpoint burner. Adjustable flame. Solders to a max. pipe dia. of 6mm.

Hydraulic Pipe Bender 022

Solid Construction. Supplied with 6 Formers 1/2 to 2”. Pipe Capacity 2mm Wall Thickness.

1,164 35

$1,339.00 GST Incl.

63 04

No 1 Angle Bender

062

Capacity: Flat Bar: 80mm x 6mm or 60mm x 8mm. Square: 20mm x 20mm.

$72.50 GST Incl.

Gravity Conveyors

SOLID CAST

Complete with adjustable stands and steel rollers. CGL1P3450STS

1500 x 450mm 150mm pitch. 2 stands.

492 17

$566.00 GST Incl.

Mighty Tough Hand Trolley MTR100

CGL3P3450STS

3000 x 450mm 150mm pitch, 3 stands.

798 26

Puncture proof wheels. Heavy duty 300kg capacity.

HEAVY DUTY

$918.00 GST Incl.

188 70

$217.00 GST Incl.

798 26

$918.00 GST Incl.

NOGA

Drill Set METRIC

175097

Contains 25 sizes: 1mm to 13mm drills in 0.5mm rises.

8 METRE TAPE

Drill Set METRIC 174971TZ

25 HSS drills 1.0 - 13.0 x 0.5mm rises.

$113.90 GST Incl.

110 43

$127.00 GST Incl.

Drill Set 2007-M2

1 - 10mm. 0.5mm rises. HSS.

Drill Set METRIC 25pc SPE1503

1 - 13mm in 0.5mm rises. For drilling metal, wood or plastic.

$63.00 GST Incl.

37 83

Tap & Die Set M500M16

Includes taps and button dies 3 - 12mm, plus tap wrenches.

MASONRY DRILL SET

$43.50 GST Incl.

143 48

Holesaw Set Quick Change

$165.00 GST Incl.

BLQC7065-S1

Carbide Bur Set 5pc 918CRSET5M

Made from solid carbide (K30) Shank = S45C Steel. The double cut bur allows for rapid stock removal in harder materials.

163 48

$188.00 GST Incl.

9 Holesaw sizes 6 – 60mm plus an extra pilot drill and a universal quick change chuck to suit 1/4’’ & 3/8’’ hex shanks.

190 43

$219.00 GST Incl.

DRILL SET

Drill Sets

NOGA Noga Set NOSP1007

For deburring, cleaning, finishing and countersinking.

BL-M1 11pc 1 - 6mm x 0.5mm increments

82 78

BL-M2 19pc 1 - 10mm x 0.5mm increments

17 30

$95.20 GST Incl.

$19.90 GST Incl.

NOGA Noga Deburrer NONG8350

Deburrs steel, aluminium, plastic, brass and cast iron.

32 17

$37.00 GST Incl.

39 13

$45.00 GST Incl.

BL-M3 25pc 1 - 13mm x 0.5mm increments

77 39

$89.00 GST Incl.

Engineers Square Set 4pc GZ01011

Hardened spring steel blades. Precisely ground stock and blade. 50, 100, 150mm.

86 09

SCRIBER

$99.00 GST Incl.

Combination Square 300mm

Magnetic Bases & DIAL INDICATORS

Stainless steel. With mitre square, spirit level, plumb level, 45degree level, height gauge. Straight edge and scriber.

MAgnetic bases

267CS3030

Accepts dial indicators and DTI’s. With on/off switch. 7010S-10

Standard

7739

56 96

$89.00 GST Incl.

$65.50 GST Incl.

EASY BLADE CHANGE

60 00

$69.00 GST Incl.

15 13

ProTouch Retractable Knife T1774106

GREAT VALUE

7011S-10

Fine Adjustment

$17.40 GST Incl.

Safe lock system to prevent blade from slipping during use.

Hook & Scraper Set 301008BP

Contains multi purpose scraper 285mm, multi purpose scraper 210mm, scratch awl 200mm, cotter pin puller 225mm, radiator hose remover 175mm.

Dial Indicator

Dial Test Indicator

10mm x 0.01mm with accuracy certificate.

Range 0.8mm grads 0.01mm. Dial reading 0 - 40 - 0. Face dia. 39mm.

2046S

33 91

FLAT SCRAPER

$39.00 GST Incl.

63 48

$73.00 GST Incl.

513-404E

123 48

$142.00 GST Incl.

Scaffolders Level 250mm ST81SM-250

250mm long with magnets in base. Milled working face. Pressure die-cast light alloy body. Highly shock absorbent.

HOT PRICE

$75.00 GST Incl.

Pick Up Tool ULHT-2

Lifts 3.5lbs without powercap. Powercap on increases lifing power by 45%. Telescopes 168 - 831mm.

Tool Backpack

Hex Key Set 2pc

Constructed from lightweight 600 denier polyester material for strength and durability and comfort. Perfect for carrying tools when accessing hard to reach work sites. Twelve exterior webbed loops for tools and fasteners and a snap hook for attaching key chains. Eleven interior pockets as well as multiple zippered compartments for extra storage.

Proguard Finish delivers superior corrosion protection. Metric & imperial sets.

$36.00 GST Incl.

T22199

TIR-22419-R

112 17

Pick & Hook Set

$129.00 GST Incl.

2633/S4

Back Pack Tool Storage

Miniature awls, hooks and picks for scribing, alignment, O-ring removal, piercing holes in leather or fabrics and for cleaning nooks and crannies.

TIR-5000

Perfect for carrying tools when accessing remote job sites. Multiple exterior pockets and twelve interior pockets for tools and fasteners. Digital audio pouch with an earphone slot.

31 30

56 52

$35.00 GST Incl.

30 00

$34.50 GST Incl.

13 91

$16.00 GST Incl.

Storage Combo 2pc

BIG DEAL

RS5356

9 drawer Tool Chest & 7 drawer Roll Cabinet.

781 74

Professional Roller Cabinet 11dwr RMS6158

$899.00 GST Incl.

1065 W x 460 D x 975 H mm. Ball-bearing slides on each drawer. Internal lock system.

997 39

$1,147.00 GST Incl.

Professional Tool Chest 8dwr RMS6157

1042 W x 449 D x545 H mm. Ball-bearing slides on each drawer. Internal lock system.

730 43

$840.00 GST Incl.

Fold Up Tool Box KT87402

3 Section Fold Up Tool Box. Tubular handle, curved hinge and flange reinforced design. 255 x 470 x 220mm.

104

Socket Set 23pc KBT2759

$120.00 GST Incl.

1/2” drive ranging 10 - 32mm.

ction d Constru

Soli

1/2” DR Socket Set 25pc KT4226MR02

8PC 1/2” DR DEEP SOCKET SET

Ranges 10 - 32mm with standard accessories. 1/2” drive.

96 52

$111.00 GST Incl.

207 83

$239.00 GST Incl.

Socket Set 39pc

POWERBUILT CAP

KBT2760

Socket Set 39pc

3/8” drive ranging 6 - 22mm & (Deep) 10 - 14mm.

KT2539MR

6pt 1/4” Drive Std Sockets: 4 - 13mm, Torx Bits: T8-T40, Hex Bits: 3-10mm, Star Sockets: E4-E8.

98 26

94 78

$113.00 GST Incl.

$109.00 GST Incl.

Socket Set 43pc GCAD4303

1/2” Drive. Ranging 8 - 32mm & 3/8 - 1.1/4”.

207 83

$239.00 GST Incl.

Socket Set 26pc

Tool Set 99pc GCAZ0038

3 Draw Tool Box with Lift Up Lid 1/4” Drive Socket Set 4-13mm 1/2” Drive Socket Set 10-32mm Combination & double ring spanners Screwdrivers, pliers, circlip pliers, hex keys.

GCAD2608

3/4” Drive. Ranging 22 - 50mm & 7/8” - 2”.

498 26

$420.00 GST Incl.

$573.00 GST Incl.

365 22

Socket set 35pc

Socket set 36pc

3/8” Drive ranging 5/16 - 7/8” & 9 - 22mm. Made in Japan.

1/2” Drive ranging 3/8 - 1.1/4” & 10 - 32mm. Made in Japan.

3279AM

268 70

4279AM

298 26

$309.00 GST Incl.

$343.00 GST Incl.

Socket Set S140T

Socket Set 33pc

The new Bahco Go-Thru drive system allows good accessibility in confined spaces and to long screws. Comes with a high quality 72 teeth reversible ratchet with two component (flex) handle. 10 - 24mm.

527-8333

3/8” drive ranging 6 - 22mm & 1/4 - 7/8”.

79 13

99 13

$91.00 GST Incl.

Adjustable Wrenches Code

Size

644040HS

150mm

644041HS

200mm

644042HS

250mm

644043HS

305mm

940208HS

380mm

WES5011

450mm

WES5012

600mm

+GST $11.91 $15.48 $18.70 $27.83 $51.30 $80.00 $126.09

$114.00 GST Incl.

Socket Set 23pc 527-7123

Inclusive

1/4” drive ranging 4 - 12mm & 3/16 - 7/16”.

$13.70 $17.80

51 30

$21.50 $32.00

$59.00 GST Incl.

$59.00 $92.00 $145.00

Adjustable WrenchES

Chrome alloy steel. Made in Spain. Ole! Code

100mm

IG77-06

150mm

IG77-08

200mm

IG77-10

250mm

Inclusive

IG77-12

300mm

$38.90

IG77-15

375mm

$47.50

IG77-18

450mm

$62.50

IG77-24

600mm

$75.90

IG771-30

750mm

Adjustable Wrenches

Features an adjustable jaw that allows the tightening and release of both pipes and bolts and nuts.

2 CANS OF COCA COLA WITH EVERY WRENCH

Code

Size

9070P

150mm

9071P

200mm

9072P

250mm

9073P

300mm

+GST $33.83 $41.30 $54.35 $66.00

Size

IG77-04

Starter Tool Set 119pc KT911-Starter

See in store for a full listing. Made in Taiwan.

868 70

$999.00 GST Incl.

+GST $18.26 $19.04 $22.26 $28.52 $38.70 $68.70 $106.52 $260.00 $458.26

Inclusive $21.00 $21.90 $25.60 $32.80 $44.50 $79.00 $122.50 $299.00 $527.00

ROE Spanner Set 26pc

11 PIECE ROE SPANNER SET

KT1226MR

6 - 32mm.

287 83

$331.00 GST Incl.

Speed Wrench Set 12pc

GREAT VALUE

KT12112MR

8 - 24mm. For fine movement of fasteners with 5 degrees of movement increments. STUBBY SPANNER SET

277 39

$319.00 GST Incl.

Screwdriver Set 31pc

Screwdriver Set 14pc

Comes with slotted, phillips, pozidrive screwdrivers, magnetic pick up and a range of screwdriver bits.

With phiilips and flat tip screwdrivers. Includes an insulated screwdriver.

KT35114MR01

WST6068

60 78

$69.90 GST Incl.

$86.30 GST Incl.

Screwdriver Set 13pc

Mini Ratchet Set 15pc

108-0013

With slotted, phillips, pozi and robertson screwdrivers.

KT2515MR

With a popular range of bits and a mini ratchet.

34 70

27 04

$39.90 GST Incl.

$31.10 GST Incl.

Hex Drive Bit Set 31pc GABW3103

Handy set of popular bits. 1/4” hex mini Bit Ratchet. Includes flat, phillips, pozi, square, torx & hex bits.

right Angled Driver FTGC0808

37 39

1:1 speed rotation. Allows easy access into tight corners. Quick change chuck. Use with screwdriver bits, hex drills etc.

$43.00 GST Incl.

39 13

$45.00 GST Incl.

Attack Driver AN112A

Heavy duty attack driver complete with case and 4 bits.

Bit Sit 40pc GAAD4002

10mm hex bits. Selection of 30mm & 75mm long bits. Selection of Spline, Hex, Star bits. 3/8” & 1/2”. Quick change bit holder.

79 13

$91.00 GST Incl.

82 35

$94.70 GST Incl.

Screwdriver Set 10pc 605-10-PC-AU

With phillips, flat tip and robertson.

A child asked his father, “How were people born?” So his father said, “Adam and Eve made babies, then their babies became adults and made babies, and so on.” The child then went to his mother, asked her the same question and she told him, “We were monkeys then we evolved to become like we are now.” The child ran back to his father and said, “You lied to me!” His father replied, “No, your mom was talking about her side of the family.”

38 17

$43.90 GST Incl.

Aviation Snips

Cut low carbon cold rolled streel. Non-slip serrated jaws are made from waer resistant molybdenum steel. WS1 WS1 Right Cutting WS2 WS2 Left Cutting WS3 WS3 Straight Cutting

45 22 EA

$52.00 GST Incl.

MADE IN GERMANY

Offset AVIATION Snip Set

Aviation Snip Set

Left and right hot drop forged snips for strength and durability. Made in USA.

Hot drop-forged molybdenum alloy steel blades for strength,durability. and longer lasting cutting edge life * Soft grips * Made in the U S A.

MW6510-SET2

80 00

MW6716-SET3

$92.00 GST Incl.

39 91

RCC3

With sizes 150, 200, 250mm.

86 09

Cold Chisel Set 3pc

$45.90 GST Incl.

$99.00 GST Incl.

Pin Punch Set 8pc

Long Pin Punch Set 8pc

RTP8

M701PP8L

Contains 3mm taper punch, and 2, 3, 4, 5, 6, 7, 8, 10mm x 150mm Pin Punches.

Contains 8 long series pin punches 2.5 - 10mm. Long Series Pin Punches for machine shop and motor service work. These Long Series pin punches are extra-long, measuring 200mm. The bodies are 113mm and the drive pin sections are 88mm long. They are well proportioned, hardened, properly tempered and have a knurled grip.

60 00

$69.00 GST Incl.

5130

$59.00 GST Incl.

Ball Pein Hammers

Punch & Chisel Set 11pc

With hickory handles for a long working life. Code

Size

H328

4oz

H330

8oz

H332

12oz

H334

16oz

H336

24oz

H338

32oz

H340

40oz

+GST $12.43 $14.52 $17.39 $20.78 $27.13 $28.26 $30.43

RCP11

Set of 3 cold chisels & 8 punches

Inclusive $14.30

129 57

$16.70 $20.00

$149.00 GST Incl.

$23.90 $31.20 $32.50 $35.00

Trade Pliers

Taiwan made Trade pliers.

Code

Model

KT6311-06

Long Nose 163mm

KT6311-08

Long Nose 203mm

KT6211-06

Diagonal 163mm

KT6231-08

Diagonal 200mm

KT6111-06

Linesman 163mm

KT6111-08

Linesman 213mm

KT6411-06

End Nipper 165mm

+GST $16.96 $21.74 $16.96 $21.74 $16.96 $21.74 $21.74

Inclusive $19.50 $25.00

German Trade Pliers +GST

Inclusive

Long Nose 205mm

$48.00

$55.20

Combination Plier 225mm

$48.00

$55.20

NWS13862-200

Side Cutter 200mm

$48.00

$55.20

NWS165112-300

Waterpump Plier 300mm

$60.00

$69.00

Code

Model

NWS14062-205 NWS109262-225

$25.00 $25.00

$19.50 $25.00 $19.50

Bolt Cutters

Powerbars

Chrome molybdenum steel jaws. Large super grip handles.

CFBC1215

3/8” Drive. 375mm

34 70

$39.90 GST Incl. 315-0270

350mm

315-0275

34 70

450mm

315-0271

43 39

60 78

$39.90 GST Incl.

600mm

$49.90 GST Incl.

CFBC1624

1/2”Drive. 600mm.

$69.90 GST Incl.

53 04

$61.00 GST Incl.

Groove Joint Pliers Circlip Plier Set 4pc GPAQ0401

7” Straight Internal & External, 7” Bent Internal & External. Heavy duty canvas wallet. 400-0113

250mm

16 61

$19.10 GST Incl.

400-0114

300mm

400-0117

25 65

$29.50 GST Incl.

400mm

$79.30 GST Incl.

$51.00 GST Incl.

Club Hammer 3lb 611-2048

68 96

44 35

Fibre shaft & drop forged head.

20 00

$23.00 GST Incl.

Locking Chain Clamp 450mm

DMAB1A18

Ideal for turning or holding awkward shapes.

28 70

$33.00 GST Incl.

Lever Riveter JBAB3264

4 interchangeable heads. Rivet sizes - 3.2, 4, 4.8, 6.4mm.

60 00

$69.00 GST Incl.

Riveter KT21-20-101

Pulls rivets 2.4 - 4.8mm. Industrial quality.

26 00

$29.90 GST Incl.

Bench Drill Press DP305B

The Tooline DP305B Bench Drill Press has a net weight of 34 kilograms, and an overall height of 870mm. The chuck to base measures at 538mm and the chuck to table measures at 413mm. The table size is 245 x 240mm, with the chuck measuring 16mm. The maximum spindle travel is 80mm, and the spindle speeds are 12, 230 - 2470 rpm. The features of the Tooline DP305B Bench Drill Press include an in built light to illuminate workpiece, a fully adjustable table with angle indicator, a cast iron base for added stability, an emergency stop button, a locking depth stop for blind hole drilling and an aluminium motor housing for increased heat dissipation and lighter weight. Compact and lightweight. Ideal for the home or workshop.

298 26

$343.00 GST Incl.

Air Compressor AC2040

40 litre tank, FAD 131LPM, 1500watt (2HP) 2850rpm.

282 61

$325.00 GST Incl.

Air Compressor BigPioneer265

2hp. 10bar, 20litre. 7.6cfm, FAD 135lpm.

Air Compressor Spitfire1250

11.5cfm, FAD240lpm, 50 litre tank.

398 26

78174

$458.00 GST Incl.

$899.00 GST Incl.

Mini Air Angle Die Grinder Kit GRID-A6314

Air Hose Assemblies

Grinds, deburs, polishes and smoothes rough areas. Ball bearing construction for advanced durability.

99 91

$114.90 GST Incl.

Code

Model

+GST

Inclusive

HALF1010A

10m

$30.00

$34.50

HALF1020A

20m

$51.30

$59.00

HALF1030A

30m

$70.43

$81.00

Sand Blaster

HD Air Angle Grinder 125mm

SANB-A3714

Gravity feed allows uninterrupted and consistent material flow. Compact and portable with large capacity. (18oz).

HAMMERITE RUSTBEATER

10 PACK CUTTING DISCS

GRID-A3042

Light-weight and compact design. Self-locking lever throttle prevents accidental star-ups.

173 04

78 17

$199.00 GST Incl.

$89.90 GST Incl.

Air Cut-Off Tool 75mm TOOC-A2303

Built-in speed regulator and throttle lever. Designed to cut through muffler hose clamps, rusted bolts, fibreglass, sheet metal, etc.

5 PIECE CUT-OFF WHEELS

$87.00 GST Incl.

Heavy Duty Air Needle Scaler SCAA-A4315

Light-weight design. Lever throttle control. Excellent for paint, rust, dirt or weld scale removal from irregular and curved surfaces or hard-to-access areas.

18174

$209.00 GST Incl.

HD Air Impact Wrench Air Riveter W5741-K

WREI-AR3651

1/2” drive. 400ft/lbs. 5/8” bolt capacity. 4cfm average air consumption.

Pulls 3/32”, 1/8”, 5/32” and 3/16” rivets.

195 65

233 91

$225.00 GST Incl.

$269.00 GST Incl.

9 PIECE IMPACT SOCKET SET

Lever Action Grease Gun

Hydraulic Oil 20Lt

600A

TellusS2M46

Develops grease pressures of up to 12,000psi. Delivers up to 1.6g of grease per stroke.

Premiun quality, solvent refined & high viscosity.

GP GREASE CARTRIDGE

72 61

148 70

$83.50 GST Incl.

20 LITRE DRUM PUMP

$171.00 GST Incl.

Batteries

Micro Torch 20134

Super Bright 21 Lumen ANSI FL1. Light Beam up to 35m. Up to 13.5 Hours operational time. IP67 Water-Proof. 2 x AA size Alkaline Batteries included.

14 70

$16.90 GST Incl.

Mini Torch 20133

AAA 24pc AA 24pc

23817 23818

23692

12 17 EA

Super Bright 93 Lumen ANSI FL1. Mega Light Beam up to 213m. Up to 10 Hours operational time. IP67 Water-Proof. 2 x D size Alkaline Batteries included..

6V Lantern

11 22 EA

$14.00 GST Incl.

$12.90 GST Incl.

21 74

$25.00 GST Incl.

Heavy Duty Hand Cleaner 2Lt refill SK87045

For extra heavy duty cleaning of grease, oil, ink, and carbon black. Contains all natural biodegradable walnut shell scrubbers.

SPARE CUTTERS

Wheel Dressers GZ12070

No 0 - Cutter diameter 1.1/4” (30mm)

17 30

$19.90 GST Incl. GZ12071

No 1 - Dresser Size 11.1/2” (290mm)

$49.00 GST Incl.

$26.50 GST Incl.

Jack & Stands Combo 3 Ton SJG0801

Heavy duty 360 degree swivel rear castors. Lifting range 138mm to 495mm. Axle stands Lifting range 285mm to 425mm.

File Set 1-478-08-1-2

Set of five 8” engineers files in popular cuts with handles.

55 57

$63.90 GST Incl.

CHALK HOLDER

230 43

$265.00 GST Incl.

Engineers Chalk 144pc C302

100mm long.

33 91

$39.00 GST Incl.

Tackle Talk

By Graeme Sinclair

Fish are smart, sometimes too smart, but the predatory anglers are circling and every so often you have days that are quite simply “mind blowing”. Quiet days are often the result of environmental factors, seasonal fluctuations or missing the change of light early in the morning or late in the evening. In the north the snapper fishing has been challenging and one reason that was suggested to me was a late spawn caused by a slower increase in water temperature. Yesterday I was part of a charter boat crew out of Auckland and we were plagued by juvenile kingfish. Admittedly we also managed to take home a feed of snapper but we were

surrounded by schools of small kahawai and kingfish. The Captains belief is that it has indeed been challenging but we could be in for a late flurry. Those of us who were able to employed a strayline rig while the beginners utilized the standard ledger rig with a sinker on the bottom and two droppers. The bait selection consisted of pilchards and squid and both were devoured often by small fish. A handy rule to remember in these situations is “big bait, big fish” and add to that hooks in the 8/0 plus category if you want to avoid an endless process of midgets. The predatory capability of your average angler is enhanced by the array of choices available at the terminal end of your tackle. I have friends who refuse to fish any other way than with soft baits and others who have tried soft baiting once and given up. My advice is don’t be afraid to experiment and also persevere. New techniques such as the use of soft baits or slow jigs can take time to master. On slow days I add small baits to slow jig hooks and often have great success. Over Christmas my family and I were in the North and I fished in the Bay of Islands. I have several favourite spots in the “Bay” and late one afternoon

we cruised out on to a favoured patch of foul ground. It took me two attempts to get the boat in the right position with the fish behind us, down current and in front of the structure. We anchored, drifted back in to position and I told my cobber to throw out a soft bait before dropping the berley. He heaved the soft bait out 40 metres behind the stern and put the rod in the holder. As he lowered the berley something grabbed the soft bait. Mr Rod Holder had done it again! It is amazing how often that works and of course Craig will always say it was pure skill. That fish turned out to be a 25 pound snapper that currently sits in the taxidermists freezer. Predatory anglers we may be but it is nice to have a bit of luck. I also had a very good reason to change my outboard motor recently. The other brand was superb and I have always said my choice would be either Yamaha or Honda. Well, I now have a Honda 250HP silver bullet which replaces the other 225. Honda have always claimed significant fuel savings which I confess I treated with some scepticism. The reality is that I am getting a fuel saving of at least 25%. It is massive! As I sit here I can see my Surtees sitting in the shed and there also sits that big beautiful motor beckoning me to head out and start it up. I get an extra days fishing out of a tank of gas and that is an incentive to hang up the sign that says, “Gone Fishin!” Tight Lines!

If you can’t get to us, phone, fax or email and we will send it to you

We are a fair-minded company and try to exceed the requirements of all ‘Fair Trading’ legislation. Prices are current for the period denoted on the cover. Stocks are not always available in all stores all the time but we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologize and try to take all reasonable measures to fix the issue for you.