THECALIPER
NZ’S INDUSTRIAL SUPPLY SPECIALISTS
• The speed rewind control system on all models ensures that the hose retracts at a safe and steady speed
• The stop-at-any-point latching mechanism secures the hose at the desired length every time
• Sliding guide system ensures that the hose returns neatly & evenly onto the barrel assembly
• Gen3 hose assemblies offering ultimate flexibility are kink-free under pressure
11028
BATTERY OPERATED 20L OIL, ATF & COOLANT DRUM PUMP
• Delivers up to 280 litres per battery charge
• Delivery rates of up to 4.3 litres per minute
• Run time of up to 65 minutes fully charged
• 21.6V 2.5Ah Li-ion rechargeable battery
• 50:1 Ratio Pump
• ZSB high pressure swivel
• Supplied with Pump, lid, follower, 4m high pressure grease hose and B2 Booster gun
• Delivers 50g/min free flow
• 2 x 18V Li-ion Batteries with 1 hour quick battery charger
• Comes in a Hard Plastic Carry Case
•
/ WATER REELS
• Hybrid polymer hose for the ultimate flexibility, to lay flat and prevent tangles or kinking under pressure
• Working pressure 250 psi
• ON/OFF Switch on top
• Flash Light at the bottom with 100 lumens
• Protective Rubber Body for easy and ergonomic grip during handling
10pc Screwdriver Set
Sandblasted magnetic tips
Cr-V, with hex shanks to resist twisting and for use with a wrench for added torque
Includes Phillips #0, #1, #2, #3
Slotted 3mm, 5mm, 6mm (2), 8mm
Robertson S-2
WSS5013
Air Compressor Oil Less 3 Litre, 900W
1/2” Dr 10pc Deep Impact Socket Sets
• Made to ANSI specifications
Chrome molybdenum steel, black oxide finish
Packaged in a blow molded storage case
• Z-Drive sockets grip and turn flat surfaces of fasteners for reduced rounding
KBT5418 Metric 10 to 24mm
KBT5421 Imperial 7/16" to 1"
• 13.5L storage case, equipped with 12 assorted bins
Also with the ability to remove all compartments, to store longer items Q20946
With oil-free technology, we eliminate product contamination from oil, reducing maintenance while increasing performance and duty cycle
The patented top-cooling air outlet structure reduces heat generated by traditional side-cooled units and increases service life and performance
AC03900X
Two recessed heavy-duty handles each end Raised skids enable maneuverability with a fork lift Supplied as flat pack, assembly is required
MADE IN TAIWAN
FREE BONUS
DUAL PURPOSE
The PRODP, also known as an 'Up & Up', allows you to use as both, a step ladder or has the ability to flip up into a straight ladder. This aluminium ladder is a robust ladder designed with the best joining methods to last a lifetime.
The PROSD Double Sided aluminium step ladder, is a robust, heavy duty industrial ladder intended for those who need and expect their "tools of trade" to last beyond the next few years. Designed with the best joining methods that won't loosen over time.
PLATFORM
The Platform aluminium ladder is part of the Indalex 'top of the line' heavy duty range, outperforming other ladders on the market. Safety Gate, Handrails, Wheels and other optional accessories are available. The use of double solid rivets, to join the steps to the side rails, together with the Indalex ALGA system spreader bars and platform, guarantees this ladder will remain structurally sound after years of repeated use.
LOAD RATING 180 KG
DUAL PURPOSE
The TRDDP Dual Purpose Tradesman aluminium ladder is ideal for the everyday tradesman or home handyman, the lightweight design
EXTENSION LEVEL-ARC
The PROX Extension heavy duty ladder, with Level-Arc ladder leveler, is designed to be a robust ladder with minimal flex, for the highest applications. It is made from a high tensile aluminium alloy, with a 3 piece rung joint system to attach the D rung to the side rails, hence the best joining methods have been incorporated to sustain repeated use for years to come. An automatic latch and dual rope system allows full and smooth control when raising or lowering the upper section.
The TRDX Extension ladder, is designed to be a robust ladder with minimal flex, made from structural grade high tensile aluminium, providing greater strength and durability and lightweight for ease of movement and operation. The TRDX has equal width base and fly sections, giving an equal width standing area at all heights.
DOUBLE SIDED
The TRDSD Double Sided aluminium step ladder is ideal for the everyday tradesman or home handyman. Made from structural grade high tensile aluminium along with semi tubular steel rivets to provide greater strength and higher durability, this compact, lightweight little step ladder is the perfect solution to reach those awkward areas. One of the lightest double sided ladders in New Zealand!
PLEASE CHECK IN STORE FOR ALL 150+
100% nitrile with no plasticizers
Specially formulated to improve elasticity, and give greater comfort to the wearer, thereby reducing finger fatigue
Improved tactile sensitivity
Raised diamond textured palm to enhance grip Free of natural rubber latex
Black
Unisex style with all the features & benefits of the sneaker shoe, with additional height for extra protection, this sneaker is styled mid-cut height safety shoe with medial YKK zip for convenient quick & easy foot entry
SMS Material
Elasticated hood, wrists and ankles
Front zipper Sizes M-2XL
Bizweld Welders Overalls
The Bizweld Iona FR Coverall offers visible protection to the wearer.
Clever design features include flame resistant reflective tape on the shoulders, sleeves and legs, the option to insert knee pads when needed
Protection against radiant, convective and contact heat.
Certified protection against molten metal splash.
Two chest pockets with stud closure. Rule pocket.
Concealed stud front for easy access. Stud adjustable cuffs for a secure fit. Knee pad pockets to facilitate knee pads. 8 pockets for ample storage.
40+ UPF rated fabric to block 98% of UV rays. Radio loops for easy clipping of a radio.
Available in sizes up to 5XL.
Next Generation Cut Protection at the last generation price!
An extremely comfortable glove offering higher cut level D protection to EN388:2016. Next level nitrile foam dipping for enhanced grip -especially good around oils and chemicals .Bright green liner provides easy identification.
Molten splash protection over the summer months!
Light weigth shirt offering maximum protection is guaranteed with permanent flame resistance and ARC2 protection against electric arc. The shirt tail will stay tucked in during movement and all day wear. Handy features include adjustable button cuffs and flapped chest pockets.
Innovative technology keeping the wearer cool for 8 hours. Can be worn under or over other garments.
The Cooling Neck Scarf instantly cools the wearer helping to reduce heat stress when needed most.
Bizweld Welders Shirt
DLM Wallace has been manufacturing and supplying products for New Zealand’s trade sectors for over 140 years.
Solders & Flux OUR RANGE
Plumbing & Roofing
HAND SOAP
Trade-Tough hand soap is a heavy duty hand cleaner designed to remove heavy metals, metal dust, grease and grime.
$11.90 + GST $13.69 Incl
Pumps & Filters
Building & Landscaping
CA602 is a flux paste for use with general silver brazing. It is generally required when brazing different metals such as copper to brass.
Our range includes plumbing, roofing, pumps, and building materials — now available at your local TradeZone. Now available at your local TradeZone. BRAZING FLUX PASTE
www.dlmwallace.co.nz
Our W-750 SV and W-750 SK pumps are ideal for pumping from septic tanks, chambers, and other wastewater sources.
$995.50 + GST
$38.44 + GST $1144.83 Incl $44.21 Incl
36V Premium Brushless 3-Tool Kit
KC363DRBL(GRZ)
Supplied with 2x 1080W Multi Volt batteries, Rapid Charger and Case
125mm Angle Grinder 1/2” 770Nm Impact Wrench 155Nm 13mm Impact Drill 36V Premium Brushless Impact Drill & Wrench Kit KC362DPL(GRZ)
36V
• 1/4” Drive 120XP Ratchet 140mm(5.5”) Breaker Bar
• Wobble Extension 51mm(2”), 152mm(6”)
• Deep Metric Sockets: 8, 10, 12, 13, 14mm
• 1/4” Drive Universal Joint Standard Metric Sockets: 4, 5, 6, 7, 8, 10, 11, 12, 13, 14mm
• SAE Sockets: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16” $6500+GST
• 1/4” Drive 90T Ratchet 130mm (5”)
• 1 /4” Drive 6 Point Metric Sockets - 4, 5, 5.5, 6, 7, 8, 10, 11, 12, 14mm
• 1/4” Drive 6 Point SAE Sockets - 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”
•
•
•
•
•
(VRD Off) 68V
Rated Output 5A/10.2V220A/18.8V
8.9kg
C/w ARC T2FX x 8m Flexi TIG Torch, Arc Set x 4m, Argon Flowmeter Regulator RAZORWELD TIG220 PFC 220 AMP DC TIG/MMA CLEAR VISION TECHNOLOGY
• HD Backlit Interface • Synergic MIG Control
• Gas & Gasless MIG & 15Kg Spool Capacity
• Power Factor Correction (PFC) • Spool Gun Ready
• 4 Geared Wire Drive • Trigger Controlled DC Lift Arc TIG
• Advanced MMA Features • Smart Fan
RAZORWELD MIG350WRZ 350 AMP - 415V MIG-TIG-MMA WELDER MIG250PFC 250AMP DC MIG/TIG/MMA
• MIG Gas/Gasless, 15kg Spool Capacity
• Burn Back Control
• Variable Inductance Control
• Spool Gun Ready
• Push Pulll Gun Ready
• Inbuilt Cylinder Rack
• DC TIG - Lift Arc Ignition
• MMA Electrode Hot Start
• Compliant to AS/NZ 60974-1
• Compliant to AS/NZ 60974-1 $3,296.00
•
• Viewing Area 96mm x 42mm
• 2 Arc Sensors
• Grind Mode (External)
•
•
• Classification 1/1/1/2
• 1/1/1/1 Classification
• 100x83.4mm View Size
• External Grind Button
• 4 Arc Sensors
• Memory States
• 5-13 Shade Control
• 4 Point Harness
• Back-up Battery
• Standards - AS/NZS
XCEL-ARC WELDERS STARTER KIT - MIG EVERYTHING YOU NEED TO BEGIN
• Mig Welding Gloves - Black
Cover Lens 133x114mm 5 Pack
RazorWeld Carry Bag MIG Torch Holder with Magnetic Base
Featuring “Wide Body” sizing pattern which is 8% roomier than other large gloves. Continuously welted seams, Professional series lining, patented palm and thumb reinforcement and seams sewn with Kelvar thread.
XA-10-2016L Large XA-10-2016XL X-Large
The unique design of this glove provides a wide Aluminized PFR Rayon heat reflective knuckle strap offering prolonged, superior radiant heat protection during welding. The unique 3-dimensional finger construction offers unrestricted dexterity and sensitivity of fingers.
XA-10-2788-L Large
XA-10-2788-XL X-Large
DUTY HEAT REFLECTIVE WELDING GLOVES PROLONGED, SUPERIOR RADIANT HEAT PROTECTION
These high quality gloves are made of special tanned cowhide, they are oil & weather resistant, pliable and long lasting. All seams are sewn with Kevlar thread for better flame and spatter protection against seam burnout.
BISON PRESTIGOUS WELDING GLOVES FOR BETTER FLAME AND SPATTER
The Prestigious Pearl Bison is our best welding glove to date. Durable,heat-resistant, dexterous are all words used by real welders who have already treated themselves to a pair. The new Prestigious Pearl Bison leather gloves deliver without sacrificing comfort or safety.
XA-10-2655-L Large XA-10-2655-XL X-Large
XCEL-ARC WELDERS STARTER KIT - TIG ESSENTIAL TOOLS FOR STARTING TIG
• Tig Welding Gloves - Black AS6000F Welding Helmet Front Cover Lens 133x114mm 5 Pack
Cover Lens 105x65mm 5 Pack
RazorWeld Carry Bag
Tig Torch Holder with Magnetic Base
Engineers Chalk Holder - Flat
E3 Tungsten 1.6mm x5
E3 Tungsten 2.4mm x5
Pigskin TIG glove construction pattern offers an excellent fit. The materials used are specially processed for superior pliability and are sewn with Kevlar thread for better protection against seam burnout. “ Reversed Grain Pigskin” guarantees a snug breathable fit with sensitive feel of the filler wire.
XA-10-1003-L Large XA-10-1003-XL X-Large
DIGITAL VERNIER WITH FRACTIONS READING 6/150MM
The EC799BF series offers a slim, streamlined profile, a large clear easy-to-read LCD display, USB output, locked battery cover plate and function buttons for zero and mm/inch/fractions supplied in an EVA case.
EC799BF-6/150-EVA
DIGITAL VERNIER WITH FRACTIONS READING 8/200MM
The EC799BF series offers a slim, streamlined profile, a large clear easy-to-read LCD display, USB output, locked battery cover plate and function buttons for zero and mm/inch/fractions supplied in an EVA case.
EC799BF-8/200-EVA
DIGITAL VERNIER WITH FRACTIONS READING 12/300MM
The EC799BF series offers a slim, streamlined profile, a large clear easy-to-read LCD display, USB output, locked
and
EC799BF-12/300-EVA
Step Drill Set HSS 3 Piece
For use in sheet metal, aluminium, plastic & fibre glass, ideal for sheet metal without pre-drilling.
Range: 4-12, 4-20, 4-30
Flat shank
Fixed Drilling Steps: Spiral Flute for reduced vibration and greater control through steps
Part No. D504SET3
T-Slot Locking Clamp 275MM
Jaws locks automatically with highest tip pressure without needing adjustments
Chrome Vanadium steel for durability and rust prevention thinner handle for easier grip & more power. Part No. L2200275 $53.10
Black Book Engineers
Engineers Black Book contains a wealth of up-to-date, useful, information within over 160 matt laminated grease proof pages.
TradeZone E3M HSS Drill Set 25 Piece
General purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials such as steel, aluminium, brass, wood & plastics.
• Range: 1.0 - 13.0mm x 0.5mm rises
• 118° Standard Point - For general purpose applications
• Made from M2 High Speed Steel
Part No. 174971TZ
Right Angle Attachment
$183.10
• Quick-change chuck accepts standard 1/4" hex shank bits
Heavy duty all metal housing and steel gears with ball bearing construction
• Made from Tool Steel
Part No. 107RAD001
Hose Reel Helix PVC
• Improved safety feature; controlled hose return
• Hose layering system
• Auto lock / auto rewind Solid brass internal spindle
FLEXOVIT
MAXX INOX CUTTING DISCS
• 125 x 1.0 x 22.23mm
• Flexovit MAXX ultra thin cut-off wheels are specially developed using new Bond Technology in combination with new NorZon Plus grain for cutting stainless steel, alloy and carbon steels.
FLEXOVIT
WA46 FLEXIBLE GRINDING DISCS
• 125 x 3.0 x 22.23mm
• Excellent depressed centre light weld grinding & polishing wheel
• For stainless steel and hard ferrous metals
NORTON BLAZEX
•
FLEXOVIT
MULTI MATERIAL CUTTING DISCS
• 125 x 1.0 x 22.23mm
• For cutting stainless steel, metal, masonry, aluminium, PVC, tiles and rubber
• Fast, straight cutting VERSATILE
PORTABLE CHOP SAW
• 356 x 3.0 x 25.4mm
• Fast cutting of ferrous metals and stainless steel
• Wheels suitable for Low Speed Electric Chop Saws
FLEXOVIT
METAL GRINDING CUTTING DISCS
• 125 x 6.8 x 22.23mm
• For grinding ferrous metal welds and structural steels
• Excellent performance and life
FLEXOVIT STEEL & STAINLESS GRINDING DISCS
• Excellent depressed centre grinding wheel, for fast stock removal
• Excellent depressed centre grinding wheel, for fast stock removal
• For stainless steel and hard ferrous metals
TUFBAK WATERPROOF PAPER SHEETS
• 230 x 280mm
•
Power every job. for
577 Med Thread Sealant
LOCTITE® 577 is a medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings. Fills the space between threaded parts and seals and locks at the same time.Designed for the locking and sealing of threaded metal pipes and fittings, this product provides an instant, low-pressure seal and won't creep, shrink or shred.
$33.24
Thread Sealant Cord 160M
LOCTITE® 55 is designed for sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The ideal choice for a quick, easy and reliable seal. The product has approval for natural gas, hydrogen gas and potable water.
General purpose thread sealant for a quick, easy and reliable seal.
Promotes water discharge health, non-toxic, non-hazardous, non-flammable, biodegradable, septic tank safe and no animal testing and rinses.
Residue-free.
MPI Approved C32. Truck Wash Concentrate
$14865
$170.95 Incl.
XHP™ 220 greases are extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting-edge, proprietary, lithium complex manufacturing technology.
567 Low Thread Sealant
Low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. It's a white, 1-part thread sealant designed for the locking & sealing of tapered metal pipe threads & fittings. As an anaerobic-curing thread sealant, it cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.
$34.39
Imperial O' Ring Splicing Kit
Includes 406 25ml.
Eliminates the need for an inventory of different sized O-rings. Joints resist water & oil & are as strong as the rubber itself Emergency repair kit for different O-ring sizes Make replacement O-rings on the spot. Easy to handle. Ready for use in seconds.
Multipurpose industrial strength concentrate formula provides a safer alternative to caustic acidic cleaners. Industrial Cleaner and Degreaser
XP 320, 20L
The Mobilgear 600 XP Series are extra high performance gear oils having outstanding extreme pressure characteristics & load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. Mobilgear 600 XP Series is designed to stay ahead of the changing needs of gearbox technology. Mobil 600
Safe Step 100, 4Ltr
Safe Step 100 is a single pack, heavy duty pedestrian grade, anti-slip floor coating. Ideal for around machinery, pedestrian ramps, stairways walkways and ramps. Easy to apply by trowel or roller.
Incl. 6-12mm & 1/4-5/8
Maintenance Kit for Air Brake Lines. 43-pieces of
OKO Magic Milk™ Tubeless is a step forward for latex-based free-flowing liquid tyre sealants. It is designed for ‘tubeless ready’ or full UST tubeless tyres (also usable in tubes: for maximum puncture proofing on UST & MTB tubes we recommend Puncture Free Bike or X-Treme) Magic Milk
473154
This castor set allows for your workbench to be lifted off the ground (to an approximate height of 25.4mm/1”) and repositioned easily.
These durable polypropylene tubs stack on top of each other and nest inside of each other minimising the amount of space they take up for storage.
Lid to suit the full range of 32L, 52L, and 68L Stack & Nest Crates. One lid fits all sizes! Each lid can be cable-tied shut for extra piece of mind. Making sure your items stay securely inside the stack & nest crate.
75MM NYLON WHEEL
100KG CAPACITY CASTOR
Zinc plated corrosion resistant frame and a robust twin race swivel ensures a long and productive life. The frame is made of and assembled with plain bearings on the castors axle and a 75mm nylon wheel. Available with either a rigid frame, swivel frame or swivel frame with brake.
WORKBENCH CASTORS KIT (1 SET OF 4 CASTORS) - QUICK RELEASE MOUNTING PLATES
This castor set allows for your workbench to be lifted off the ground (approx/ 5.4mm/1”) and repositioned easily. The quick-release plate allows the castors to be removed and stored when not in use.
LIGHTWEIGHT FOLDING HAND
Light As a Feather – Folds Flat In Seconds This Innovative light weight range of trolleys comes in 4 sizes and easily folds down for storing into small spaces such as car boots or cupboard shelves.
The PF1074-62 from Richmond Rolling Solutions is a 255mm diameter puncture proof wheel and has a tyre width of 85mm. This wheel is designed to suit 5/8 inch axles.
100MM REBOUND RUBBER
Part of our light industrial series range these castors combine a zinc plated corrosion resistant frame with our 100mm rebound rubber wheel, and a robust twin race swivel ensures a long and productive life. Available with either a rigid frame, swivel frame or swivel frame with brake.
Pliers Set 4pc -
1 x End Nippers
1 x Twin Grip Screw Removal Pliers
1 x Diagonal Cutters
1 x Cobra Water Pump Pliers
End Cutting Nippers
Circlip Plier Set 4pc
Needle-Nose Pliers
Cobra High-Tech Water Pump Pliers
Insulated option.
Diagonal Cutters
CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications.
• Penetrating gel – applied as an oil, it penetrates on application, evaporates very quickly within 5 to 10 seconds and sets as a gel-like grease
• Does not drip off for fling off at high speed
• Hot & cold wash resistant
• Ideal for highly loaded reciprocal moving parts and for general use in heavy industries, workshops, and automotive.
CRC Penetr8 is an industrial strength, low viscosity lubricant and penetrant designed to quickly loosen and free seized, bound or frozen fasteners.
• Extreme penetrating action – high speed penetrant, specially formulated to penetrate rust, dissolve varnishes and gums
• Leaves a thin non-drying, colourless film with outstanding lubrication & corrosion inhibiting properties
CRC Syntex is a synthetic multipurpose lubricant suited to both heavy and light commercial use, as well as around the home and garage.
• Extreme temperature range – effective from -40°C to +350°C
• High flash point – increased user safety
• Extreme pressure lube – TIMKEN OK load 18kg (40lb)
• Forms a colourless, odourless and tasteless film
• Will not wash off or dry out
CRC Penetr8 Freeze Off is an industrial strength, low viscosity, rust penetrating lubricant with a unique freezing effect designed to loosen and free seized, bound or frozen fasteners quicker and more effectively than conventional penetrants.
• Extreme penetrating action – specially formulated rust penetrating lubricant, dissolving varnishes and gums
• Freezing effect – penetrates deeper and works faster
• Improves performance and operating efficiency
– loosens rusted and corroded nuts, bolts, couplings, fittings, hinges and frozen components
ETCH IT - ETCH PRIMER
CRC Etch It is a single pack etch primer with excellent adhesion to bare metal. It is formulated for etching and key-coating bare aluminium, stainless steel, brass, copper and galvanised metal surfaces.
• Provides adhesion for painting aluminium, stainless steel, brass, copper and galvanised iron Tough durable film
• Fast drying
• MPI approved C23
CRC Prime It - Red Oxide Primer is a single pack penetrating shop primer with high levels of anti-corrosive zinc complexes.
• Zinc enriched for corrosion protection – high levels of anti-corrosive zinc complexes
• Long-term protection – up to 3 years outdoors before overcoating or recoating with CRC Prime It is necessary, depending on conditions
• Scratch resistant, durable – withstands harsh outdoor conditions
• MPI approved C23
PRIME ITRED OXIDE PRIMER BLACK ZINC PREP IT - SANDING PRIMER ZINC IT
CRC Black Zinc’s unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a black satin finish.
• Ideal for outdoor protection of metals against rust
• Can be used directly on bare metal for touch-up or coating
• Scratch & solvent resistant
• Long-term corrosion protection
• MPI Approved C23
• Black satin finish
CRC Prep It is a single pack high build easy-sanding metal primer with a grey finish. Inhibits corrosion and forms a quick drying protective coating.
• High build, easy sanding – ideal as primer coat over bare metal or intermediate coat
• Zinc enriched for corrosion protection Excellent adhesion to bare metal
• MPI Approved C23
CRC Zinc It is a weld through single component zincrich compound that offers the same advantages as hot-dip galvanising by forming a highly-protective coating with 95% highest purity zinc on bare steel or iron surfaces.
• Weld through - Zinc It provides a unique coating that can be welded through
• Fast drying
• Easy application
• Long-term corrosion protection
• MPI Approved C23
Strength
• High strength structural adhesive
• Elastomeric (flexible)
• Excellent adhesion
• Ideal for construction, building, engineering, automotive & marine applications
• Extremely versatile - can replace most construction, polyurethane adhesives & sealants
828
TradeZone Mt Maunganui 79B Hull Road 07 575 0504
TradeZone Palmerston Nth 711 Tremaine Ave 06 357 8888
TradeZone Masterton 300 High Street 06 370 0390
TradeZone Blenheim 50 Grove Road 03 577 2040
TradeZone Nelson 35 Quarantine Road 03 547 8000
TradeZone Takaka 46 Motupipi Street 03 525 9575
TradeZone Westport 26 Wakefield Street 03 789 7033
TradeZone Greymouth 10 Boundry Street 03 768 5720
TradeZone Rangiora 326 Flaxton Road 03 313 3425
TradeZone Hornby 278B Main South Road 03 343 6345
TradeZone Ashburton 146 South Street 03 308 3147
TradeZone Timaru 12A Heaton Street 03 684 7036
TradeZone Oamaru 36 Orwell Street 03 434 6956
TradeZone Invercargill 168 Dee Street 03 218 2059
Find your local TradeZone outlet
