construction products
TV3000 & TV4500 Dust Collector Vacuums
PASSION. INNOVATION. EXCELLENCE
TV3000
Dust Collector Vacuum With advanced technologies and accumulated know-how, the TV3000 Twin Dust Collector and TV4500 Dust Collector have powerful suction capacity and filtration technology that allows for perfect collection of both airborne dust and even the remaining dust on the floor.
Vacuum motor switches
Motor Housing
Automatic filter cleaning motor switch
Clamps
Hose inlet (50mm/75mm)
PTFE filter housing and body
Longopac bag and Plastic Dust Bag LDPE applicable
TECHNICAL DATA VOLTAGE POWER AIR PRESSURE AIRFLOW HOSE WEIGHT DIMENSIONS PLASTIC DUST BAG NOISE
TV3000 220V
50/60Hz, single phase
2400W (1200W x 2, 3.2HP) 2600mmAq 280 c.f.m 50 Ø / 75 Ø 65 kg 600 x 600 x 1450 mm 500 x 800mm LDPE 65db
TV4500
Dust Collector Vacuum The TV3000 and TV4500 are ideal for all surface preperation equipments such as grinders, polishers and scarifying machines that are used in construction sites, factories and warehouses.
Vacuum motor switches
Automatic filter cleaning motor switch
Motor Housing Hose inlet (50mm/75mm) Clamps
PTFE filter housing and body
Longopac bag and Plastic Dust Bag LDPE applicable
TECHNICAL DATA VOLTAGE POWER AIR PRESSURE AIRFLOW HOSE WEIGHT DIMENSIONS PLASTIC DUST BAG NOISE
TV4500 220V
50/60Hz, single phase 3600W (4.7HP) 3000mmAq 330 c.f.m 50 Ø / 75 Ø 80 kg
750 x 700 x 1550 mm 500 x 800mm LDPE 75db
PTFE Filter
INSTALL LONGOPAC BAG FOR 68 69+0 B ENEFIT S & FB)EHOW ATTOB)U RTOEINSTALL S LONGOPAC BAG FOR 68 69+0 HOW B) HOW TO INSTALL LONGOPAC BAG FOR 68 69+0
for TV3000 and TV4500 Filter protector PTFE FILTER AND SECONDARY ASBESTOS FILTER PTFE Filter PTFE FILTER adaptor #1 & #2
adaptor #1 & #2(Do not remove it) adaptor #1 & #2 The PTFE filter repels water and has a low co-efficient of
SECONDARY ASBESTOS FILTER
This allows for easy removal of dust and particles and protects the motorAUTO fromFilter being damaged. Cleaning System 68 69+0 START-UP : 68 69+0 START-UP : 68 69+0 START-UP : The secodary filter (Ultra HEPA) aids collecting 1. inSecure collection hose to both hose inlet(vacuum) and equipment. 1. Secure collection hose to both hose inlet(vacuum) and equipment. hazardous particles such as Asbestos and silica. 1. Secure collection hose to both hose inlet(vacuum) and equipment. 2. Secure2.Longopac adaptor,adaptor, tie bottom by cableby tiecable and pull down bag. Secure Longopac tie bottom tie bag. Traxx TV3000A and TV4500A (Asbestos) are certified to 2. Secure Longopac adaptor, tie bottom by and cablepull tie down and pull down bag. 3. Confirm vacuum is OFF before plugging power cord into 220V outlet. Confirm is OFF before plugging power cord into 220V outlet. comply with Dispersed Oil Particulate (DOP)3.test, as 3.vacuum Confirm vacuum is OFF before plugging power cord into 220V outlet. 4. Turn ONTurn autoON filter cleaningcleaning motor switch. mentioned in the AustralianAUTO Standard IEC 60335.2.69. auto switch. Shaker motor assembly set Filter shaker arm 4. set 4. Turn filter ON auto filter motor cleaning motor switch. (Check the sound of filtration. If no sound or lower, (Check the (Check sound of If no soundIf or thefiltration. sound of filtration. nolower, sound or lower, do not operate then replace shaking bar-white PE.) do notvacuum operate vacuum then replace shaking bar-white PE.) do not operate vacuum then replace shaking bar-white PE.)
Filter p (Do no
5. Wait 10 seconds then turnthen ONturn vacuum motor switch 1/2. 5. Wait 105.seconds ON vacuum switch 1/2. Wait 10 seconds then turn ONmotor vacuum motor switch 1/2. AUTOMATIC FILTER CLEANER 6. Vacuum is now ready for operation. 6. Vacuum6.isVacuum now ready for operation. is now ready for operation. The automatic filter cleaner operates at regular AUTO Filter Cleaningintervals, System where the rotator impacts the inner part of the metal coated HEPA filter to remove 99% of dust to the Longopac collection 68 69+0 LONGOPAC BAG DIRECTION system. ThisDIRECTION allows for dramatically extended 68 69+0 LONGOPAC BAG DIRECTION 68 69+0 LONGOPAC BAG intervals. 1. Prior to changing Longopac bag, turn OFF vacuum motor switch cleaning 1/2. 1. Prior to 1.changing LongopacLongopac bag, turnbag, OFF turn vacuum switch 1/2. Prior to changing OFFmotor vacuum motor switch 1/2. 2. Wait 22.minutes while vacuum filter purges, then turn OFF auto cleaning motor. Wait 2 minutes vacuum purges, turnthen OFF turn autoOFF cleaning motor. 2. Wait 2while minutes whilefilter vacuum filter then purges, auto cleaning 3. Using 3. cable tie, fasten top & bottom of longopac bag securely, then cut it off. Using cable tie, cable fastentie, topfasten & bottom longopac bag securely, then cut then it off.cu 3. Using top &ofbottom of longopac bag securely, AUTO Filter shaker arm set
LONGOPACK BAG The TV3000 and TV4500 Dust Collectors take advantage of the Longopac bagging system, which makes managing dust very easy and efficient. With the Longopac system, all dust is collected in a heavy-duty plastic bag, which can easily be disposed of with minimal dust contact. This dust-free disposal option is very important, since fine dust can be hazardous to one’s health.
4. Turn ON autoON filter cleaning motor switch. 4. auto Turn ON auto filter cleaning motor switch. 4. Turn filter cleaning motor switch. 5. Turn ON vacuum motor switch 1/2. Turn ONmotor vacuum motor switch 1/2. 5. Turn ON5. vacuum switch 1/2.
INCLUDED ACCESSORIES
68 69+0 5HUT-DOWN : - Hose 10 68 69+0 5HUT-DOWN 68 69+0 5HUT-DOWN : Mx1 : 1. Turn OFF vacuum motor switch 1/2. 1. vacuum Turn OFFmotor vacuum motor 1. Turn OFF - switch Elbow x1/2. 1switch 1/2. 2. Wait 22.minutes while vacuum filter purges. 2. Wait 2 minutes while vacuum filter purges. Wait 2 minutes while vacuum - Pipe filter x 1 purges. 3. Turn OFF autoOFF filter cleaning motor switch. 3. auto Turn OFF auto filter cleaning motor switch. 3. Turn filter cleaning motor switch. - Floor Brush x 1 - Floor Nozzle x 1 - Round Brush x 1 - Dust Bag (LDPE, 21 x 32”) 20pcs - Velcro Strap for tightening the plastic bag - 75mm Hose Connector - Extra Longopac Bags
TRAXX CONSTRUCTION PRODUCTS Unit 4/1 Rocklea Drive, Port Melbourne, Victoria, Australia 3207 Phone: 1300 109 108 Telephone: +61 (0)3 9646 9200 Email: info@traxxcp.com.au Website: www.traxxcp.com.au
Shake