DIAMOND SHARPENING
NEW
MEASURING & MARKING
VARIJIG CLAMP GUIDES
COMBINATION ROUTER BASE
OVERSIZE BEARING BIT
DIAMOND SHARPENING TAPERED FILES
DIAMOND S 8” X 3” CLASSIC PROFESSIONAL STONE Double-sided site and workshop bench stone. ■ 8” x 3” classic professional stone. ■ Ideal for up to 3 inch plane irons and chisels. ■ Unique clearance channels produce faster, cleaner cut. ■ Substrate pre-ground to +/- 0.0005” for precision flatness. ■ Continual diamond surface on fine side prevents snagging when sharpening small or pointed tools. ■ Complete with pouch, cleaning block and non slip mat. ■ Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond. ■ Grits are clearly marked on the stone. ■ Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean. ■ Combination of unique clearance channels (300 grit) and continual diamond surface (1000 grit).
“Every woodworker should have one of these.”
Product Ref. U*DWS/CP8/FC
- Michael Hosaluk, Artist & Maker-
6” X 2” BENCH STONE Double-sided site and work bench stone. ■ Ideal for flattening chisels and plane blades as well as achieving a shaving edge in seconds. ■ Fine 1000 grit (15 micron) and coarse 300 grit (50 micron) monocrystalline diamond, grades clearly marked. ■ The 1000 grit is ideal for a fine finish on carving tools. ■ Substrate pre-ground to +/- 0.0005” for precision flatness. ■ Guaranteed for five years when used with Trend lapping fluid. Lapping fluid prevents clogging and rusting and it helps keep diamond stone clean. ■ Complete with cleaning block and non slip mat. ■ Ideal for sharpening HSS and carbide inserts.
Product Ref. U*DWS/W6/FC
1
“I used the 300 grit side of the bench stone, again the results were exceptional & I have tried using the 1000 grit side on a spindle gouge doing some finishing work and I am well pleased! I like this stone very much.” - Morris Schlesinger, Professional Woodturner & Master Woodworker -
HARPENING 3” FINE TAPERED FILE A versatile 3 inch half round/flat tapered file suitable for woodworking, gardening & domestic tooling. ■ Precision quality taper file. ■ Fine 400 grit (40 micron) monocrystalline diamond. ■ Guaranteed for five years. ■ Split plastic contoured hand-grip which is pinned either side of blade. ■ Handle 1/2 inch thick by 2-1/2 inch long.
“This product does a real nice job for you. Handy and versatile, a cool new product.”
■ Hanging hole on handle. ■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, routers, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.
Product Ref. U*DWS/TF3/F
- George Vondriska, WoodWorkers Guild of America -
3” MINI FINE TAPERED FILE A versatile 3 inch half round/flat mini tapered file suitable for woodworking, gardening & domestic tooling. ■ Precision quality taper file. ■ Fine 600 grit (25 micron) monocrystalline diamond. ■ Guaranteed for five years. ■ Split plastic contoured hand-grip which is pinned either side of blade. ■ Handle 7/16 inch thick by 2-1/2 inch long. ■ Hanging hole on handle. ■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.
“I produce a razor sharp edge on forstner bits in seconds when utilizing the Trend mini taper file.” - Morris Schlesinger, Professional Woodturner & Master Woodworker -
Product Ref. U*DWS/TF3M/F
MACHINIST FILE FINE/COARSE Double sided 2-3/8 inch machinist file. ■ Fine 600 grit (25 micron) & 300 grit (50 micron) monocrystalline diamond. ■ Guaranteed for five years. ■ Diamond is electroplated onto a steel substrate which is molded onto the hardened plastic handle. The result is an extremely durable, versatile and strong product. ■ Overall length 7 inch. ■ Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, router bits, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling.
“Every woodturner should own this tool. Sharpen skews, gouges, scrapers and even carbide inserts in seconds.” - Jimmy Clewes,, Professional Woodturner -
Product Ref. U*DWS/MF/FC
2
VARIJIG CLAMP GUI VARIJIG CLAMP GUIDES Self clamping, straight line clamp guides that use the Varijig low profile extrusion. ■ For accurate guiding of routers, saws and jigsaws. ■ Low profile extrusion with integral clamping of work-piece, double locking mechanism and two full length T-slots. ■ Common Varijig extrusion to 24 inch (610mm), 36 inch (915mm) and 50 inch (1270mm) Clamp Guides. ■ Metric and imperial sliding scale. ■ Extrusion profile 5/8” (16mm) high x 2-1/8” (54mm wide). ■ Ref. VJS/CG/PRO8 is an extra wide clamp 5” (127mm) with four T slots. Ideal for large sheet material. Clamps up to 8 foot (2.44 metre).
8 FOOT
AVAILABLE
■ Jaws have fixing holes for accessories.
Product Ref. U*VJS/CG/24 (24 inch / 610mm) U*VJS/CG/36 (36 inch / 915mm)
Extra wide clamp Ref. U*VJS/CG/PRO8
U*VJS/CG/50 (50 inch / 1270mm) U*VJS/CG/PRO8 (8 foot / 96 inch / 2440mm)
Router and cutter not included.
ACCESSORIES A range of accessories for use with our Varijig Clamp Guides. ROUTER BASE PLATE
SAW BASE PLATE
Plunge router base accessory.
Circular saw base accessory.
■ Base plate engages in the T-slot in the extrusion. ■ Made from clear plastic. ■ Includes adjustable guide bar for perfect tracking using hex key provided.
■ Base plate engages in the T-slot in the extrusion. ■ Includes adjustable guide bar for perfect tracking using hex key provided.
Product Ref. U*VJS/CG/RBP
END STOP BLOCK Adjustable end stop block. ■ Engages in the T-slot on the clamp guide extrusion and can be locked in position using locking knob.
Product Ref. U*VJS/CG/SBP
HANDLE EXTENSION Lever extension handle for Varijig clamp guides. ■ Gives better leverage to operate the clamp, especially when more clamping pressure is required. ■ Increases lever length by 5-1/4” (134mm). ■ Can be fitted and removed quickly.
Product Ref. U*VJS/CG/ESB
3
Product Ref. U*VJS/CG/EXT Router, bit and guides not included.
DES & ACCESSORIES SQUARING ATTACHMENT Allows varijig clamp guide to be squared up for maximum accuracy.
A short alloy extrusion rail that can be fixed anywhere along the length of the Varijig clamp guide, so it limits the rail travel in a set position from an edge.
■ Large 90º head allows clamp to be used as a clamping T-square. ■ Serrated front edge. ■ Includes fixing screws.
■ Ideal for repetitive grooves. ■ Removable alloy adjustable bridge guide stop can be locked in place. ■ Bridge travel is 6-15/16” (176mm). ■ Can be used as a length stop.
Product Ref. U*VJS/CG/SQA
Product Ref. U*VJS/CG/AGS
WIDE JAW KIT Pair of plastic jaws for fitting onto the jaws of the Varijig clamp guides.
FEATHER BOARD Feather board finger pressure accessory.
■ Distributes clamping pressure over the workpiece to minimise clamping marks. ■ Built-in mounting holes allow a batten to be fitted. ■ Includes fixing screws.
■ Clamps to the Varijig clamp guide which can then be easily clamped to a router table top. ■ Provides horizontal side pressure. ■ Includes fixing kit.
Product Ref. U*VJS/CG/WJK
SIDE-TO-SIDE CLIPS Allows two clamp guides to join side-to-side to clamp workpiece to workbench, obstruction free. ■ Clamp one guide to the bench and attach another clamp upside down. ■ Two clamps joined together creates a 4-3/8” (112mm) wide component support surface which is ideal for sanding. ■ Six adapters are included so three pairs of clamps can be linked securely together.
Product Ref. U*VJS/CG/SSC
ADJUSTABLE SETTING GUIDE & STOP
SIX CLIPS
Product Ref. U*VJS/CG/FB
BACK-TO-BACK CLIPS Allows two Varijig clamp guides to be joined back to back. ■ Clips comprise of alloy brackets and knobs. ■ Raises component up 1-1/4” (32mm) for unobtrusive clamping especially for full edge mould work.
EIGHT CLIPS
Product Ref. U*VJS/CG/BBC
VARIJIG EXTRA LONG PIVOT CLAMP Pair of pivoting sliding friction clamps with 2 inch clamping thickness. ■ 360 degree clamps. ■ Clamp rotates to allow the pad of the clamp to be secured firmly to the work-piece. ■ The clamp can be used with the Varijig system including the varijig set, straight guides and angle guide. ■ Aluminium body. ■ Friction lock design, so they can be positioned in extrusion without sliding out end when clamp lifted up. ■ Soft pads to prevent marring of component.
Product Ref. U*VJS/PCK/L For Varijig Clamp Guides only. Router and guides not included.
4
20” DIGITAL ANGLE RULE
DIGITAL DEPTH GAUGE
Calculates angles quickly and accurately and is ideal for woodworking, construction, and machining.
For router tables and saw benches. Horizontal and vertical measuring.
■ Digital display for angles.
■ For hand routers, router tables and saw benches.
■ Stainless steel rule with metric/ imperial scale, scale length 500mm and 18-1/2 inch. ■ Measuring range from 000.0 deg to 360.0 deg, with accuracy of 0.3 deg. ■ Rule locking function. ■ Easy operation with two press buttons. ■ Auto-shut off in 6 minutes.
■ LCD readout for mm, imperial and fractions with auto shut off 5 mins. ■ Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 2 inch. ■ Self standing with magnetic feet and flat back. ■ Injection plastic moulding with plastic rule. ■ Read-out has relative co-ordinate and absolute function. ■ 2-3/8 inch wide aperture.
Product Ref. U*DAR/500 Product Ref. U*GAUGE/D60
OVERSIZE BEARING BIT
TOOL & BIT CLEANER
for use with the Porter Cable Strike & Latch and Door Hinge templets.
An industrial grade tool and bit cleaner to remove pitch and resin build-up from sawblades, router bits, planer blades, drill bits etc.
■ Useful when making jigs, templet and patterns. ■ Shank mounted bearing guided. ■ Down shear for clean cut. ■ Equivalent to PorterCable® Ref. 43671. ■ 1/2” (12.7mm) diameter x 3/8” (9.5mm) cut with 5/8” (15.9mm) diameter bearing.
Product Ref. U*T108X1/4TC
(1/2” dia x 3/8” cut)
5
■ Acts as an excellent lubricant and increases tool life. ■ Biodegradeable, earth & human friendly. Non-toxic and non-flammable. ■ Has unique properties which break the molecular bond and lifts the dirt from the tool as opposed to eating away the dirt like citrus cleaners and other chemicals. ■ Can be used to keep table saw top rust free.
Product Ref. U*CLEAN/500 (18 fl.oz) U*CLEAN/5GAL (5 gallon) U*CLEAN/55GAL (55 gallon)
5 gallon buckets and 55 gallon drums also available.
COMBINATION ROUTER BASE A quick change, multi-functional router base. Fits most routers with 5/16” (8mm), 25/64” (10mm) and 15/32” (12mm) diameter rods at 3-1/16” (78mm) to 5-1/8” (130mm) centers.
■ ■ ■ ■ ■ ■
Quick Fit Base Multi-functional Improved Accuracy Greater Stability Superior Finish Saves Time
7 FUNCTIONS 1
MULTI-FUNCTIONAL
3
2
Offset Base
Router Compass
For better control when edge routing.
For routing circles of 3/4” (19mm) to 8-13/16” (224mm) radius.
5
Offset Mortising For timber thickness 2” (50mm) to 7-7/8” (200mm).
Product Ref. U*CRB Accessories
U*CRB/TB (Trim Base) U*N/COMPASS/AEX (2 pairs extension rod) U*GB40/B 40mm (1-37/64”) x 14mm (35/64”) guide bush) For use with unguided cutters with the Varijig Frame System
4
Clamp Guide Adjustable Grooving With 1-1/2” (40mm) micro adjustment.
6
False Panel Groove Copier For creating repeated grooves.
Anti-tilt Support For stable edge work. Height range 5/16” (8mm) to 3-1/8” (80mm).
7
Varijig Frame System Anti-tilt facility for panel cutting when used with the Varijig.
FUNCTIONS +2 MORE WITH ACCESSORIES ■ Trim Base with bearing guide follower for flush edge trimming of hardwood lippings Ref. CRB/TB. ■ Extension Rods for increasing circle radius by 22” (560mm) Ref. N/COMPASS/AEX.
Router, cutter, clamp guide and jig accessories not included.
6
PROFESSIONAL
SAW BLADES Our Tungsten Carbide Tipped Circular Sawblades are designed and manufactured to exact tolerances and give a professional finish in wood, MDF, particle board, hardboard and plywood.
■ Accurate cuts and a smooth fine finish. ■ 29 sku range from 5-3/8” to 12” in diameter.
U*NPP/USA
■ Unique features/function on slide compound miter and wood cutting blades.
Available from:
Trend Dealers. Please see website for details.
© Copyright Trend 2012. Our policy of continuous improvement means that specifications may change without notice. Trend Machinery and Cutting Tools cannot be held liable for any material rendered unusable or any form of consequential loss. E&OE ® All trademarks acknowledged.
Trend Routing Technology Inc. 7351 West Friendly Avenue Suite A Greensboro NC 27410 Telephone Toll Free: 877 918 7363 Telephone: 336 292 5051 sales@trend-usa.com www.trend-usa.com
RECYCLABLE