PHILOSOPHY
Truccsa Krete has been created as a internationalisation project and its main objective is to break into new markets, with the philosophy of using its corporate image to establish the brand. The objective is to bring the products closer to the customers, offering a combination of the best service with the greatest competitiveness, creating manufacturing centres and distribution points. Truccsa Krete is made up of a collection of personnel, some who are pioneers in research and development and others who are professionals from within the market and who have recognised experience in manufacture. Truccsa Krete offering a wide range of products offering significant advantages. Our products provide you with efficient solutions for use in construction.
PRODUCT LIST 1) VERTICAL OVERLAYS FOR DECORATING FACADES 5
T.R. RASPADO
One coat rendering mortar, with a scraped texture.
6
T.G. GRANITO
One coat rendering mortar, with a granite texture.
10 T.I.R. IMPRESO
One coat rendering mortar, imprinted rustic texture.
11 T.I.M. IMPRESO
One coat rendering mortar, imprinted stone texture.
12 T.I.T. TIXOTROPICO
One coat rendering mortar, themed textures.
14 T.L.B. LAVADO
One coat rendering mortar, trowelled texture, white.
14 T.E.G. ENFOSCADO
One coat rendering mortar, trowelled texture, grey.
15 T.B. BRUÑIDO
One coat rendering mortar, smooth texture.
15 T.S. STUCCO
One coat rendering mortar, marbled. Venetian Stucco.
2) TECHNICAL MORTARS 17 T.M.H. HIDRÓFUGO
Water-resistant mortar, for hydraulic repairs.
17 T.H. MICRO HORMIGÓN Quick setting industrial anchor mortar. 18 T.RE. RESTAURA
Mortar filler for architectural restoration.
18 T.P.CEPRONT
Instant set cement filler.
18 T.H. SEAL IMP.
Water proofing cement mortar.
3) CEMENT BASED TILE ADHESIVES 20 T.ECOL-CE
Adhesive for baked clay tiles, indoor use.
20 T.ECOL-C1T
Adhesive for earthenware tiles, indoor use.
20 T.ECOL-C1E
Adhesive for porcelain tiles, indoor use.
20 T.ECOL-C1TE
Non-slip long open setting time adhesive.
21 T.ECOL-C2TS1.PLUS
Non-slip long open setting adhesive for swimming pools.
4) ACRYLIC BASED TILE ADHESIVES IN PASTA 22 TR´COL-D1E
Adhesive for earthenware and porcelain tiles, indoor use.
22 TR´COL-DTE
Adhesive for earthenware and porcelain tiles, outdoor use.
5) CEMENT BASED SEAMLESS PAVING 23 T.PV. PULIDO
Industrial surface layer on fresh concrete.
23 T.PV. BETON
Industrial mortar 0,393-1,590 in* approx. (*1-1,5 cm), for cured concrete.
24 T.PV. AUTONIVEL
Self-levelling mortar, for floors.
24 T.PV. GRIETAFLEX
Repair mortar.
25 T.PV. STAMP
Surface layer, imprinted paving, for fresh concrete.
26 T.PV. COLOR
Cement mortar, imprinted on cured concrete.
30 T.PV. SPRAY
Cement mortar, for spraying, 0,118-0,157 in* approx. (*3-4 mm).
32 T.PV. TERRA
Seamless terrazzo. Combination fine particle mortar, for a polished finish.
2
6) CHEMICAL PRODUCTS 36 T.R. EPOXI
Epoxy primer.
36 T.R. RESINA
Acrylic primer, permanent tack.
36 T.C. P. BOND COAT
Quartz based primer.
36 HORMIPLAST T.R.
Concrete plasticizer.
36 HORMIFLUIT T.R
Concrete fluidizer.
37 FRIO’STOP T.R.
Concrete anti-freeze for low temperatures.
37 ACTICOLOR T.R.
Concrete descaler.
37 LIMCOLOR T.R.
Concrete cleaner.
37 CRISTA T.R.
Waterproofing liquid for concrete and exposed brickwork.
7) PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION 38 T.R. FLOKACEM
Domes.
39 T.R. FLOKACEM
Window frames, sills and lintels.
39 T.R. FLOKACEM
Mouldings and cornices.
40 T.R. FLOKACEM
Arabic arches.
40 T.R. FLOKACEM
Caissons for ventilation cowls.
41 T.R. FLOKACEM
Capitals and theme decoration.
41 T.R. FLOKACEM
Cultural statues.
41 T.R. FLOKACEM
Wild animal figures for parks .
41 T.R. FLOKACEM
Beam or corbel points, beams and vaults.
42 T.R. FLOKACEM
Decorative products.
8) CONSTRUCTION ACCESSORIES, NON-STRUCTURAL 43 T.R. CEMOFLOK
Round and horseshoe arches.
44 T.R. CEMOFLOK
Prosthesis for complementary designs.
44 T.R. CEMOFLOK
Decorative facade pieces.
44 T.R. CEMOFLOK
Suspended top slab.
45 T.R. CEMOFLOK
Pillar covers and hiding of electrical wires and pipes.
45 T.R. CEMOFLOK
Staircase steps.
9) TREATMENTS FOR DAMP SPACES 46 PANELCORK T.R.
Panels.
47 MODULCORK T.R.
Prefabricated bathroom modules.
3
1
VERTICAL OVERLAYS FOR DECORATING FACADES
Onecoat T.R. Raspado, scraped texture.
Onecoat Tr.I.R. Imprinted mold, imprinted texture
Onecoat T.L.B. Lavado.
Onecoat T.I.I tixotropico, themed texture.
1. VERTICAL OVERLAYS FOR DECORATING FACADES Our vertical overlays offer a wide range of products with different textures and colours, all ready to be directly applied to the surface of the facade (blocks, brick, concrete, etc.). They are decorative and different colours can be combined to create unique designs. These one coat products are used in place of the more traditional ended, (cement filler, plaster and paint) to create a coating with an average thickness of between 0,314 and 0,590 in* approx. (*8 and 15 mm).They offer improved resistance to damage caused by ultraviolet radiation, they are waterproof and breathable, resistant to erosion caused by weather and the bending and compression resistances are controlled by the regulations for vertical coverings, in accordance with the construction materials used. They are one coat rendering mortars. As the name suggests, each rendering mortar is a single product that is applied in one or more coats.
T.R. RASPADO, one coat rendering mortar with a scraped texture One coat mortar scraped in colours for bush-hammered textures (available in 55,115 lb* sacks approx.). *25 kg. T.R.Raspado is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and fibres, which together create a mixture of a specified strength. The mortar is mixed with water to achieve the required characteristics of consistency, setting time, workability, texture, colour, waterproofing and water vapour permeability. The product is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete, after the primer has been applied). The substrate surface should be uniform and not contain any holes, be levelled and plumbed and free from dust, grease, oil, silicone, release agents, paint and other repellents. Scraped texture, in terracota
Scraped texture, in blue
5
VERTICAL OVERLAYS FOR DECORATING FACADES
1
Examples of the use of T.R. Raspado – scrapped texture.
PRODUCTS TE BE USED with TR RASPADO one coat rendering mortars: T.R. BASE, base mortar of preventive repair and preparation base, for aged supports or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 66,138 lb* sacks approx.).*25 kg. T.C.P. BOND COAT, primer for capillarity-exempted, hydraulic and quartz base, (available in 66,138 lb* packages approx.).*25 kg. T.PVC. JUNQUILLOS, PVC bead for establishing the quarterings of the facade designs and work joints, (bars of 78,740 and 98,425 in* approx.)*2 and 2,5 m. T.PVC. ESQUINEROS, PVC corner units to make the corners with ‘pinto vivo’, vertically and straight, (bars of 78,740 and 98,425 in* approx.)*2 and 2,5 m. TOOLS, for manual or machine application*. * Machine application; mixer with pressure projection, feeder and gun, as well as special nozzle and support to connect accessories to the air hose and create the spraying range of the product.
T.G. GRANITO, one coat rendering mortar with a granite texture One coat mortar in colours, for marble crushing spread in colourful granite textures, (available in 55,115 lb* sacks approx.).*25 kg. T.G. Granito is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and fibres, which together create a mixture of a specified strength. The mortar is mixed with water to achieve the required characteristics of consistency, setting time, workability, texture, colour, waterproofing and water vapour permeability. T.G. Granito - granite texture
6
1
VERTICAL OVERLAYS FOR DECORATING FACADES
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete), after the primer has been applied. The application surface should be uniform and not contain any holes, be levelled and plumbed and free from dust, grease, oil, silicone, release agents, paint and other repellents. T.R. Granito is presented for its application in a paste format and later spread of crushed marble, in colours that overall will set up the granite texture.
Examples of the use of T.R. Granito – granite texture.
• COLOUR OPTIONS FOR SINGLE-LAYER OVERLAYS: T.R.RASPADO AND T.R.GRANITO A wide range of colours is available providing you with many design possibilities.
Grey
A
C
E
G
Pink
A
C
E
G
Leather
A
C
E
G
7
VERTICAL OVERLAYS FOR DECORATING FACADES
Terra-cotta A
C
E
G
Brown
A
C
E
G
Salmon
A
C
E
G
Brown
A
C
E
G
Violet
A
C
E
G
Orange
A
C
E
G
8
1
VERTICAL OVERLAYS FOR DECORATING FACADES
1
Red
A
C
E
G
Yellow
A
C
E
G
Green
A
C
E
G
Ivory
A
C
E
G
Wood
Grey Pearl
Pink
Ivory
Rolled Singing
Grey with White
9
Red
Yellow Lemon
VERTICAL OVERLAYS FOR DECORATING FACADES
1
T.I.R. IMPRESO, one coat rendering mortar, imprinted rustic texture One coat mortar in pastel colours, for impression through a rustic texture roller, (available in 55,115 lb* sacks approx.).*25 kg. T.I.R. Impreso is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and fibres, which together create a mixture of a specified strength. The mortar is mixed with water to achieve the required characteristics of consistency, setting time, workability, texture, colour, waterproofing and water vapour permeability. It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete), after the primer has been applied. The substrate should be uniform and not contain any holes, be levelled and plumbed and free from dust, grease, oil, silicone, release agents, paint and other repellents. T.I.R. Impreso is presented for its application in a paste format in different models and the subsequent impression by rubber roller, with a previous application of a demolder and its subsequent distressing with the T.G. Gelcolor product. Texture realised with roller. Texture realised with textured roller to be cut afterwards
Examples of the use of T.I.R. Impreso, imprinted texture
PRODUCTS TO BE USED with T.I.R. IMPRESO one coat rendering mortars: T.G.GELCOLOR, natural pigment filled in water-spreading, for fading effect in decoration of rustic texture distressings, for impressed and thisotropic coating, (available in 11,023 lb* packages approx.). *5 kg. T.E.G.ENFOSCADO, base mortar of preventive repair and preparation base, for aged supports or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115 lb* sacks approx.).*25 kg. T.C.P.BONDCOAT, primer for capillarity-exempted acrylic and quartz base, (available in 55,115 lb* packages approx.).*25 kg.
10
1
VERTICAL OVERLAYS FOR DECORATING FACADES
T.D.L.DESMOLDEANTE L�QUIDO, liquid demolder for imprinting of coatings and pavings, impressed or patterned, (available in 55,115 lb* sacks approx.). *25 l. RUBBER ROLLER, in different models and textures, for imprinting patterns on the imprinted one coat rendering mortar. TOOLS, for manual or machine application. ROLLERS AND STAMPS to give texture to the imprinted single-layer KRETE´ROD.
T.I.M. IMPRESO, one coat rendering mortar with imprinted stone texture One coat mortar in ivory colour, for impression through casts, with rustic textures in the shape of stone and brick of several models, (available in 55,115 lb* sacks approx.).*25 kg. T.I.M. Impreso is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and fibres, which together create a mixture of a specified strength. The mortar is mixed with water to achieve the required characteristics of consistency, setting time, workability, texture, colour, waterproofing and water vapour permeability. It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete, after the primer has been applied). The substrate should be uniform and not contain any holes, be levelled and plumbed and free from dust, grease, oil, silicone, release agents, paint and other repellents. T.I.M. Impreso is presented in dust for its application in a paste format and later impression by different models of rubber roller, with a previous application of a demolder and its subsequent distressing with the T.G.Gelcolor product. Examples of the use of Scraping, T.I.M. Impreso texture.
11
VERTICAL OVERLAYS FOR DECORATING FACADES
1
PRODUCTS TO BE USED with T.I.M. IMPRESO one coat renderign mortars: T.G.GELCOLOR, natural pigment filled in waterspreading, for fading effect in decoration of rustic texture distressings, for impressed and thixotropics coating, (available in 11,023 lb* packages approx.).*5 kg. T.E.G.ENFOSCADO, base mortar of preventive repair and preparation base, for aged substrates or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115 lb* sacks approx.).*25 kg. T.C.P.BOND COAT, primer for capillarity-exempted hydraulic and quartz base, (available in 55,115 lb* packages approx.). *25 kg. T.D.L.DESMOLDEANTE LĂ?QUIDO, liquid release for the impression of coatings and pavings, impressed or patterned, (available in 6,604 gal* packages approx.). *25 l. RUBBER STAMPS, in different models Stamps of different designs to give texture to the imprinted single-layer T.I.M. IMPRESO overlay.
and textures, for imprinting patterns on the imprintedone coat rendering mortar. TOOLS, for manual or machine application.
T.I.T. TIXOTROPICO, one coat rendering mortar with themed freehand texture One coat mortar in ivory colour, for thematic textures, freehand architectural designs and other techniques followed by different artists, (available in 55,115 lb* sacks approx.).*25 kg. T.I.T. Tixotropic is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and fibres, which together create a mixture of a specified strength. The mortar is mixed with water to achieve the required characteristics of consistency, setting time, workability, texture, colour, waterproofing and water vapour permeability. Examples of the use of T.I.T. Tixotropico, themed texture
12
1
VERTICAL OVERLAYS FOR DECORATING FACADES
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete and polystyrene pieces, following composition of the design). Before application the design of the surface should be prepared using expanded polystyrene pieces placed in a 0,157x0,157 in* approx.(*4x4 mm) steel mesh. T.I.T. Tixotropico is presented in dust for its application in a paste format, allowing a 0,787-1,968 in* approx.(*2-5 cm) thickness, so that it can be textured in a period of time between 4 and 8 hours, forming thematic drawings and textures through the use of sharp steel tools, cutters, scrapers and other kinds of complementary techniques provided by artist depending on the required task.
PRODUCTS TO BE USED with T.I.T. TIXOTROPICO one coat rendering mortars: T.G..GELCOLOR, natural filled in water-spreading pigments for fading and distressed effects in rustic texture decoration, for impressed and thixotropics coating, (available in 11,023 lb* packages approx.).*5 kg. PRECONFORMADO, for the design of relief structures using expanded polystyrene. MALLAZO, steel 0,157x0,157 in* approx.(*4x4 mm)mesh, used as the resistance structure to which the design is fitted. TOOLS, for manual or machine application. Thematic, architectural and other scenographic works
13
VERTICAL OVERLAYS FOR DECORATING FACADES
1
T.L.B LAVADO, one coat renderign mortar, trowelled texture, white Monocoat mortar of great performance, white colour, for floated textures and plasters, (available in 55,115 lb* sacks approx.).*25 kg. This is an rendering mortar made from fine particles combined with white cement, exactly the same as for the previous products. However, there are differences between the two products because of their textures, the different application methods and the different end uses of the products. This type of rendering mortar is more cost effective and has a lower thickness requirement, between 0,314 and 0,393 in* approx. (*8 and 10 mm), which means it can be applied more rapidly, thus providing additional savings in terms of labour costs. It is intended for seamless, smooth coverings, particularly in the construction of Mediterranean style ground floors, patios, party walls, etc. Substituting traditional plaster work without needing to be painted later.
T.E.G. ENFOSCADO, one coat rendering mortar, trowelled texture, grey Monocoat mortar of great performance, grey colour, for floated textures and plasters, for paint finishes, (available in 55,115 lb* sacks approx.).*25 kg.
This is an rendering mortar made from fine particles combined with white cement, exactly the same as for the previous products. However, there are differences between the two products because of their textures, the different application methods and the different end uses of the products. It is intended for seamless, smooth overlays that will subsequently be painted. Washed texture, trowelled
14
1
VERTICAL OVERLAYS FOR DECORATING FACADES
T.B. BRUﾃ選DO, one coat rendering mortar, smooth texture One coat plain texture, for thin finishes, burnishing and preparing of Venetian stucco in facade, (available in 55,115 lb* sacks approx.).*25 kg. This is a rendering mortar made from fine particles combined with white cement, exactly the same as for the previous products. However, there are differences between the two products because of their textures, the different application methods and the different end uses of the products. It is designed to create seamless rendering mortars in the form of very fine plaster which can then be painted. It is also used in the preparation of substrates that are to be marbled and substrates where other special effects are going to be created with a very fine plaster texture. Development of the application: support
T.R. Bruﾃｱido
T. S. Stucco
T.S. STUCCO, marbled rendering mortar Coloured powder product, for the application of fillings, for marbling textures, (available in 22,046 lb* packages approx.).*10 kg. Marbled rendering mortars are different in their composition. They are based on very fine mineralised silicates and wax agents. Water is used to combine this mixture with white cement of the type BLI-52.5 N, and re-dispersible polymers, modified using additives to control consistency and setting. Tr Stucco is applied in very fine coats of 0,196 in* (*0.5 mm), leaving each coat to dry and with the minimum of 3 coats. For veined finishes, the final coat is finished off with a steel trowel or trowel with an stainless trowel, applying the product in sectors, trimming the edges with the trowel and continually rubbing.
15
VERTICAL OVERLAYS FOR DECORATING FACADES
• TECNICAL RESULTS
Waterproofing results for capillary water absorption coefficients in accordance with (UNE-EN 1015-18:2003) VERTICAL OVERLAY RANGE PRODUCT
AGE
IMMERSIÓN TIME
CAPILLARITY COEFFICIENT
(days)
(minutes)
(kg/m2 *min.,0,5)
T.R. Raspado
28
90
0,2
T.R. Granito
28
90
0,32
T.I.R. Impreso
28
90
0,2
T.L.B. Lavado
28
90
0,3
Tr Lav. fondo
28
90
0,12
T.L.E. Enfoscado
28
90
0,14
T.R. Truccal
28
90
0,30
T.I.T. Tixotropico
28
90
0,20
Bending and Compression resistance results in accordance with (UNE-EN 1015-11:2000). VERTICAL OVERLAY RANGE PRODUCT
AGE (days)
FLEXIÓN STRENGTH (N/mm2)
FLEXIÓN COMPRESSIVE (N/mm2)
T.R. Raspado
28
4,4
9,6
T.R. Granito
28
1,4
3,1
T.I.R. Impreso
28
2,0
3,9
T.L.B. Lavado
28
2,9
7,8
Tr Lav. fondo
28
2,6
4,1
T.L.E. Enfoscado
28
2,7
7,1
T.R. Truccal
28
1,7
5,0
T.I.T. Tixotropic
28
2,0
3,9
16
1
2
TECHNICAL MORTARS
2. TECHNICAL MORTARS Our Technical Mortar range of products is especially designed to provide solutions to problems that can arise in building, construction, industry, public works and hydraulics. Technical rendering mortars are made up of a granulometric structure of quartz, fine particles of quartz, silica and mineralised silicates. Water is used to combine this mixture with cement with high ash content. This speeds up the setting process and results in a product which provides the greatest resistance in the shortest time.
T.M.H. HIDRÓFUGO, water-resistant mortar, for hydraulic repairs Quick-setting waterproof mortar, for hydraulic reparations on wet substrates, for capillary filtration of concretes and mortars in general, for buildings below water table, (available in 55,115 lb* sacks approx.).*25 kg. T.M.H. HIdrófugo, is a high resistance mortar which is very waterproof and is designed to be used for repairs to reservoirs and hydraulic reservoirs made from concrete, tunnels, lift shafts, water tanks, swimming pools and any other location where water is a permanent feature.
T.H. MICRO HORMIGÓN, quick setting industrial anchor mortar Quick-setting mortar of high resistance for machinery anchorage, silo structures and similar ones where a quick implementation with a high safety level is required, (available in 55,115 lb* sacks approx.).*25 kg. T.H. Micro hormigón, is a maximum strength mortar that is designed to fix industrial machinery which needs to be rapidly fixed in place, in a timescale of 4-6 hours. It is also the ideal mortar for repairing concrete structures with serious problems, covering these structures after girding the pillars.
17
TECHNICAL MORTARS
2
T.RE., mortar filler for architectural restoration Quick-setting mortar with malleable features, for the fixing and monumental restoration of statues, cornices, mouldings, colums, capitals and any cultural-related work, (available in 55,115 lb* sacks approx.).*25 kg. T.RE, is a maximum strength mortar designed specifically for the architectural restoration of cornices, mouldings, shields and other shapes. T.RE, is used as a filler and applied in the desired quantity or layers, up to the maximum application. Its great advantage comes from the fact that it is quick setting, which allows for continuous work, there is no shrinkage, and it is easily mouldable.
T.P.CEPRONT, Rapid setting mortar. Sealant for water filtration in concrete and
cement-based substrates. Instant-setting cement for leakage blockings, (available in 55,115 lb* sacks approx.).*25 kg. T.P.Cepront is a cement filler made of quartz and quick setting cement. It is prepared in the hand (hands must be protected by the use of rubber gloves) by creating a ball. At this point it starts to heat up and set and so should be immediately applied to the crack or leak, applying pressure to the product until it fully sets. This will take a few minutes. Before the product is applied the crack should be prepared. This is done by widening the crack to form the shape of the tail of a kite, trying to create a reinforcing anchor for the filler.
T.H. SEAL IMP, waterproofing cement mortar Cement hydraulic paint, for the application of fluid grout with plastic consistency, for permanent waterproofing of lift pits, wells, deposits, basements, buried bridge floors, structural foundations, pool supports, heavy clay bodies, dam and reservoir fixings, etc. It acts to pressure and counter pressure, (available in 55,115 lb* sacks approx.).*25 kg.
18
2
TECHNICAL MORTARS
T.H. Seal Imp, is a cement mortar made up of calcium crystals, mineralised silicates and different waterproofing agents that give the product its waterproofing characteristics. Water is used to combined this mixture with white cement of the type BLI 52.5 N and re-dispersible polymers. The combination creates a product which when applied to surfaces forms part of those surfaces, anchored by capillary absorption and chemical action. It is prepared as a grout and can be applied using a paint brush or hairbrush in continuous coats (minimum of three). The product is designed to be a waterproof treatment and is therefore idea for basements, car parks, lift shafts, bridges, hydraulic construction works, etc. For waterproofing with stagnant water, the product is combined with Estire Tr, a waterproof polymer compound that creates a plastic membrane which then acts as a reinforcement in permanent contact with the stagnant water. It is ideal for tanks, reservoirs, etc.
Waterproofing for tunnels
Waterproofing for the refrigeration industry
Treatments and waterproofing of buried buildings
19
CEMENT BASED TILE ADHESIVES
3
3. CEMENT BASED TILE ADHESIVES Tile adhesives can be either cement or acrylic based. Each of these basic types comes in a variety of forms depending on the surface that the tiles are going to be fixed to and the quality of the tiles that are going to be fixed. Cement based adhesives are made up of white cement of the type BLI-52,5 N , calcium carbonate aggregates, quartz and mineralised silicates, with a maximum particle size of 0,196in (0.5mm). The mortar is mixed with water to achieve the required characteristics such as control consistency, adhesive power, resistance, the potential for sliding and the drying time. The two types differ because of the different proportions and quantities of the products and additives used in each. These determine the characteristics and quality of each.
T. ECOL-CE, adhesive for baked clay tiles, indoor use Cement base adhesive mortar for ceramic placement, special for clay pastes, interior application, (available in 44,092 lb* sacks approx.).*20 kg.
T.ECOL-C1T, adhesive for earthenware tiles, indoor use Cement base adhesive mortar for ceramic placement, earthenware and porcelanic, on cement and concrete substrates and plasterboard panels, is imited sliding, (available in 44,092 lb* sacks approx.).*20 kg.
T. E C O L - C 1 E , a d h e s i v e fo r p o rc e l a i n t i l e s , i n d o o r u s e Cement base adhesive mortar for ceramic placement, earthenware and porcelanic, on cement and concrete substrates and plasterboard panels, is long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
T.ECOL-C1TE, Non-slip (T), long open setting time (E) adhesive. Cement base adhesive mortar for ceramic placement, earthenware and porcelanic, on cement and concrete substrates and plasterboard panels, is limited sliding and long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
20
3
CEMENT BASED TILE ADHESIVES
T.ECOL-C2TS1. PLUS, long open setting time adhesive for swimming pools Cement base adhesive mortar for ceramic placement, earthenware and porcelanic, on cement and concrete substrates and prefabricated panels, special for outside placement, is limited sliding and long-lived, (available in 55,115 lb* sacks approx.).*25kg.
21
ACRYLIC BASED TILE ADHESIVES
4
4. ACRYLIC BASED TILE ADHESIVES IN PASTA Acrylic based tile adhesives are made from a base of quartz and silica with a very fine particle size of 0,007 in approx.(0.2 mm), bound together using an acrylic resin and modified using additives to control the characteristics of the product: consistency; dryness; slipping and adhesion to surfaces. They are particularly recommended when fitting ceramic tiles onto non-porous surfaces, where a very uniform application is needed and where it is important to avoid placing too much adhesive onto concrete or polystyrene panels, cardboard panels,plaster, etc. It appears in the shape of pasta.
T.R. COL-D1E, adhesive for earthenware and porcelain tiles, indoor use Acrylic base adhesive mortar for ceramic placement, for earthenware and porcelanic placement, on capillarity-exempted substrates, indoor use and long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
T.R. COL-D1TE, adhesive for earthenware and porcelain tiles, outdoor use Acrylic base adhesive mortar for ceramic placement, for earthenware and porcelanic placement, on capillarity-exempted supports, outside placement, is limited sliding and long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
PRODUCTS TO BE USED with TILE ADHESIVES: T.JUNTACOLOR, bedding mortar in colours for decoration in ceramic placement, for 4mm gap joints,(available in 11,023 - 33,069 and 55,115 lb* packages approx.).*5, 15 and 25 kg. T.JUNTAFIN, bedding mortar in colours for the sealed one in ceramic placement, for thin joints of traditional placement,(available in 11,023 - 33,069 and 55,115 lb* packages approx.).*5, 15 and 25 kg.
22
5
CEMENT BASED SEAMLESS PAVING
5. CEMENT BASED SEAMLESS PAVING Seamless paving is a new concept in paving and takes advantage of the concreting of surfaces to create an attractive finish. Once the concrete is laid, the surface is treated using a roller to add texture and colour for a decorative finish. Another paste format product for the application on tanned concrete which will be subsequently polished, textured or spread over designs previously placed on the first application base. Seamless imprinted paving products are maximum strength products which recreate traditional rustic designs and imitate different natural textures.
T.PV. PULIDO, industrial surface layer on fresh concrete Powder component for the surface course over fresh concrete, for its subsequent polishing, in colours, grey, red, green and others on demand, (available in 55,115 lb* sacks approx.).*25 kg. T.PV. Pulido, is a compound consisting of quartz, silica and colour, combined with white cement of the type BLI-52.5 N and modified using wetting agents and other additives to control penetration into the fresh concrete. It is applied by sprinkling it onto the surface while mechanically rubbing it in a circular motion, thus allowing the product to continuously penetrate the surface while the hardening process takes place. This ensures an even colour finish.
T.PV. BETON, industrial Mortar 0,393-0,590 in* approx.(*1-1.5 cm), for cured concrete High resistance mortar for application on controlled-consistency paste, for application over cured concrete in 0,393-0,590 in* approx.(*1-1.5 cm) thickness, (available in 55,115 lb* sacks approx.).*25 kg.
23
CEMENT BASED SEAMLESS PAVING
5
This is a mortar consisting of fine particles of quartz and silica. It is combined with white or gray cement of the type BLI-52 N or grey CEM II/A-LL 42,5 R, modified using additives to control consistency, setting and strength. It is available in green, red, black, and grey and the method of application is the same as for Tr Pulver.
T.PV. AUTONIVEL, self-levelling mortar, for floors. Self-levelling mortar for uniform top layers in pavings, as preparation for the placement of ceramic pavings and other synthetics, (available in 55,115 lb* sacks approx.).*25 kg. Self-levelling mortars are designed for the preparation of floors where surfaces need to be completely level so that ceramic paving can be laid at a later date. They are made up of silica aggregates, grey cement CEM II/A-LL 42,5 R and regulating additives that control the reduction of water used in the mixing and the elasticity of the mortar so that when it is poured, be it manually or mechanically, it self-levels with the help of a spreader.
T.PV. GRIETAFLEX, repair mortar Base mortar of preventive repair and preparation base, for aged substrates or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115 lb* sacks approx.).*25 kg. Repair mortar is designed for repairing surfaces, for preventing future problems with the finishes for vertical overlays and seamless paving. It is composed of silica aggregates and water is used to combine this mixture with grey concrete CEM II/A-LL 42,5 R, modified using additives to control consistency, setting time and strength.
24
5
CEMENT BASED SEAMLESS PAVING
T. PV. STAMP, surface layer, imprinted paving, for fresh concrete Impressed pavings, powder component available in colours, for the surface course over fresh concrete, for the impression or pattern through rubber casts, (available in 55,115 lb* sacks approx.).*25 kg. T.PV. Stamp, is made of quartz and silica, mixed with white cement BLI-52.5 N and additives to control the consistency of the product in damp conditions. It is designed to form a layer covering the surface of freshly laid concrete. It comes in the form of a powder and is applied by scattered it over the surface that you want to treat. A powder releasing agent, T.D.P. Desmoldeante, is also applied to prevent direct contact between the rubber stamp and the concrete surface. Stamps come in a variety of designs and when applied to the concrete they create textures. The overall result is that you can create different colours and textures.
Examples of the use of T.PV. Stamp
25
CEMENT BASED SEAMLESS PAVING
5
Examples of the use of T.PV. Stamp
T.PV. COLOR,cement mortar, imprinted on cured concrete Impressed pavings, high resistance mortar for the application on controlled-consistency paste, for application over cured concrete in 0,393-0,590 in approx. (1-1.5 cm) thickness, prepared for the impression or pattern through rubber casts, (available in 55,115 lb* sacks approx). * 25 kg. T.PV. Color, paving is made up of quartz and silica, mixed with white cement BLI-52.5 N and additives that form a perfectly packed curve. Water is used to combine this mixture to provide the right characteristics for the task, which in this case is to create a seamless paving 0,3930,590 in* approx.(*1-1,5 cm) thick. T.PV. Color is created to provide you with decorative paving in places where applying a greater thickness is not possible.Texture is added by imprinting using rubber stamps, as for the previous product T.PV. Stamp. Powder release agent and liquid demoulding agent, Desmol T.D.L and Desmoldeante T.D.P. Desmoldeante, can be used as desired. The product is applied to cured concrete once the surface has been prepared using repair mortar, which should be applied if holes, chips or cracks exist.
26
5
CEMENT BASED SEAMLESS PAVING
• STAMPS OR STENCILS FOR IMPRINTED PAVING The wide range of stamps and continuous imprinting mats available mean that you can create many different textures and add a touch of design to your paving.
M(A)
M(B)
M(C)
M(D)
M(E)
M(F)
M(G)
M(H)
M(I)
M(J)
M(M)
M(N)
M(O)
M(P)
M(Q)
M(R)
M(S)
M(T)
M(V)
M(Y)
P(A)
P(B)
P(C)
P(D)
P(E)
27
CEMENT BASED SEAMLESS PAVING
• COLOURS AVAILABLE FOR IMPRINTED PAVING
Grey Luxury. D.green
Grey Luxury. D.red
Grey Luxury. D.brown 26
Grey Luxury. D.yellow
Grey slate. D.dark toasting
Grey slate. D. red
Sinai Sand. D. yellow
Sinai Sand. D.dark toasting
Sinai Sand. D. red
Sinai Sand. D. green
Sinai Sand. D. black 10
Sinai Sand. D. brown 26
28
5
5
CEMENT BASED SEAMLESS PAVING
• COLOURS AVAILABLE FOR IMPRINTED PAVING
Guadarrama. D.black 10
Guadarrama. D.red
Guadarrama. D.green
Guadarrama. D. dark tan
White D. green and yellow
White, orange and black 10
White D.yellow
White D. brown 20
Brown D. orange
Brown D.black 10
White D.brown 20 and yellow
Yellow albero D.green
29
CEMENT BASED SEAMLESS PAVING
5
T.PV. SPRAY, cement mortar, for spraying, 0,118-1,157 (3-4 mm) Fluid application mortar through spraying gun, for solutions where it is required a paving over cured concrete on 0,118-0,157 in* approx. (*3-4 mm) thickness, high resistance and periods of time inferior to 6-8 h, for the traffic it is applied continuously and over quarterings with Stencil, (available in 55,115 lb* sacks approx.).*25 kg. T.PV. Spray, is a spray-on paving for use when an average thickness of 0,118-0,157 in* approx. (*3-4 mm) is required. It is designed to be used in emergencies,where the surface must be passable within 8 hours. T.PV. Spray, is a cement mortar made of white cement of type BLI-52.5 N, aggregates with very fine particles, which is modified to control resistance while the product is applied as a paste, in the form of a grout, as well as consistency and final strength. T.PV. Spray, is applied to cured concrete surfaces using a spray machine which consists of a hopper, a spray gun with different nozzles to control the flow of the material and an air system to create the spraying range. It is applied to a surface once any necessary repairs have been carried out.Firstly, the cement mortar is laid. Once this is dry the stencil, which creates the design, is laid on top of the cement and different colours can be applied to create the finish that you want to achieve. Finally, once cleaned and brushed to remove any remaining substances, the surface is treated with resin.
• TEXTURAS T.PV. SPRAY TEXTURES CREATED BY STENCIL PATTERNED SPRAY CEMENT
30
5
CEMENT BASED SEAMLESS PAVING
• STENCIL, STENCILS TO BE USED WITH T.PV. SPRAY TO CREATE DESIGNS
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
S-9
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-18
S-19
S-20
S-21
S-22
S-23
S-17
31
CEMENT BASED SEAMLESS PAVING
5
T.PV. TERRA, seamless terrazzo. Combination fine particle mortar, for a polished finish Mortar in colours, composed by dry in different colours and grades, between 0,118-0,236 in* approx.(*3-6 mm), applied in paste on cured concrete, on a 0,590-0,787 in* approx.(*1.5-2 cm) thickness, so that once it is set, it can be polished dryly and work as a continuous terrazzo, (available in 55,115 lb* sacks approx.).*25 kg. T.PV. Terra, is a mortar based paving made of white cement of the type BLI-52.5 N, silicate aggregates, larger marble chips in a range of colours and additives to control consistency, setting and resistance. Water is used to combine this mixture. T.PV. Terra, is applied to cured concrete in a layer of 0,5900,787 in* (*1,5-2 cm). This is allowed to set and harden before being polished, treating the whole of the surface until the different colour aggregates can be seen. Together with the base colour of the cement this creates a seamless terrazzo style paving to which a resin is applied in order to bring out the colours and protect the surface.
P-1
P-2
P-3
P-4
P-5
P-6
P-7
P-8
P-9
PRODUCTS TO BE USED with seamless paving: FIBRES FOR MORTARS: Steel fibres used to reinforce concrete. These fibres are obtained by wire drawing. The shape adopted by DIXTREL, FIBERCON and TREFIL allows an excellent holding quality to concrete, which improves the reinforced concrete’s mechanic characteristics, thus avoiding fissures to occur.
32
5
CEMENT BASED SEAMLESS PAVING
These three types of fibres are directly added to the mortar as it s being mixed just as any other ordinary additive. Both with DIXTREL, FIBERCON and TREFIL, the minimum recommended dose is 25/m 3 of mortar. (Amount of fibre/lb=3470+- 10 Units). • DIXTREL 1,968 in* approx (*50 mm) Its main feature is that the shape at both ends has a cylindrical section. MINIMUM TRACTION STRENGTH = 1,250 N/mm2 • FIBERCON 1,968 in* approx (*50 mm) Its main feature is the wavy shape all along its filament. MINIMUM TRACTION STRENGTH = 900 N/mm2 • TREFIL 1,968 in* approx (*50 mm) Its main feature is the wavy shape all along its filament. MINIMUM TRACTION STRENGTH = 1.250 N/mm2 • FIBRES-AR This is an inorganic glass fibre used to reinforce concrete and mortars, which provides a high degree of protection, helping prevent fissures and reducing porosity. Traditional glass fibres have only a short-term load resistance due to the aggressive alkaline characteristics of concrete; with FIBRES-AR, designed with a special formula in which includes zirconium oxide, it is not affected by limy environments, and is stable to concrete alkali. Its traction strength is really high, as it has a filament density per weight unit far above its competitors, and also a great elasticity, enabling it to easily absorb the concrete retractions. • POLIPRO-FIB Multifilament polypropylene fibres specially designed to be mixed with mortars, they render them resistant and prevent fissures.
T.PV. GRIETAFLEX, base mortar of preventive repair and preparation base, for aged supports or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115 lb* sacks approx.).*25 kg. T.D.L.DESMOLDEANTE LÍQUIDO, liquid demolder for imprinting of coatings and pavings, impressed or patterned, (available in 6,604 gal* packages approx.).*25 l.
33
CEMENT BASED SEAMLESS PAVING T.D.P. DESMOLDEANTE EN POLVO, powder release for imprinting on surfaces, to prevent mould sticking to the damp surface, (available in 17,636 lb* packages approx.).*8 kg. T.R.RESINA, surface guard and colour-highlight styrene acrylic -base fixer which helps the surface resistance of pavings, (available in 6,604 gal* packages approx.).*25 l. T.R. RESIWAT, surface guard and colour-highlight acrylic - base fixer which helps the surface resistance of pavings, (available in 6,604 gal* packages approx.).*25 l. T.R.RESIPUL, surface guard and colour-highlight polyurethane-base fixer which helps the surface resistance of pavings, (available in 6,604 gal* packages approx.).*25 l. T.R.RESIPOX, surface guard and colour-highlight epoxidic - base fixer which helps the surface resistance of pavings, (available in 6,604 gal* packages approx.).*25 l. Tools, for manual or machine application * Levelling tools, steel trowels with extendable handles, kock-it, change of flow direction mechanism, joints markers, edgers and other complementary tools. * Mechanical polisher. This consists of grinding plates with eccentric movement which expose a new layer and leave you with a polished finish.
• TOOLS FOR MANUAL OR MACHINE APPLICATION OF PRODUCTS TO BE USED WITH SEAMLESS PAVING
Roquer
Magnesium trowel
Edger
Trowel
Rake
Stamping machine
Bag
Marker gun
Marker gun
Hopper
34
5
5
CEMENT BASED SEAMLESS PAVING
Tolva
Concrete regulator
Polisher
Measuring jugs
Compressor 450 l/min
Diamond disc
Setter 120
Trimmer
90-120 blade
Narrow blade 120
Trimmer blade 4/B
Trimmer blade 6/B
Trimmer plate 75
• QUALITY CERTIFICATES. WORK CONTROL
35
Trimmer plate 60/3 arms
Trimmer plate 60/4 arms
CHEMICAL PRODUCTS
6
6. CHEMICAL PRODUCTS Different technical solutions for: Concrete plants, monuments restorers, petrochemical industries, waterproofing and building specialists. T.R. EPOXI, epoxy primer Primer for capillarity-exempted epoxidic base, (available in 5,283 gal* packages approx.).*20 l. This is a resin to be used on non-porous surfaces. it is applied to the surface to be treated and while it is still fresh the rendering mortar is applied to create a chemical adhesion. T.R. RESINA, acrylic primer, permanent tack Primer for capillarity-exempted with permanent tack, (available in 44,092 lb* packages approx.).*20 kg. This is permanent tack resin in the form of an adhesive that remains tacky over the long term, creating a primer on which rendering mortars can be anchored. T.C.P.BOND COAT, quartz base primer Primer for capillarity-exempted acrylic and quartz base, (available in 66,138 lb* packages approx.). *30 kg. This is a resin with added silicates of particle size 0,196-0,314 in* approx.(*0.5-0.8 mm). it is applied to surfaces to create a rough surface that acts as a primer and creates an anchor for rendering mortars. HORMIPLAST T.R, concrete plasticizer This is a product that can be added to concrete, in the proportion of 0,002 ga*l (*0.008 l) for each lb of cement used in the mixing, it improves fluidity without the need to add more water, (avaible in 6,604- 13,208- 52,834 and 267,17 gal* packages approx.).*25, 50, 200 y 1000 l. HORMIFLUIT T.R, concrete fluidizer This product is added to concrete in the proportion of 0,001 gal* (*0.007l) per lb of cement, it reduces the amount of water needed in mixing. this in turn increases the strength of the concrete 1 3 with an average strength increase of /4 gal/Yr approx. for each litre saved in mixing, (avaible in 6,604- 13,208- 52,834 and 267,17 gal* packages approx.).*25, 50, 200 y 1000 l.
36
6
CHEMICAL PRODUCTS
FRIO STOP T.R, concrete anti-freeze for low temperatures This anti-freeze admixture is added to concrete being laid in low temperatures. It allows setting to take place as normal, (avaible in 6,604 gal* packages approx.).*25 l. ACTICOLOR T.R, concrete descaler This concrete descaler removes concrete residues from any surface, (avaible in 6,604 gal* packages approx.).*25 l. LIMCOLOR T.R, concrete cleaner Concrete cleaner this cleaning product removes the white marks caused by calcium hydroxide in the cement, (avaible in 6,604 gal* packages approx.).*25 l. CRISTA T.R, water-proofing liquid for concrete and exposed
brickwork Cement hydraulic paint, for the application of fluid grout with plastic consistency, for permanent waterproofing of lift pits, wells, deposits, basements, buried bridge floors, structural foundations, pool supports, heavy clay bodies, dam and reservoir fixings, etc, (available in 6,604 gal* packages approx.).* 25 l. This is siloxane product used to waterproof concrete, exposed brickwork and other plastered mortar surfaces that present problems in terms of dampness caused by the rain. It works by capillary absorption repels water when applied it forms insoluble crystals that fill out the pores, so creating a waterproof layer.
37
PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION
7
7. PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION This is a new system based on the latest technology and consists of products made from a lightened material, in this case from high density expanded polystyrene (EPS.D30). This material is produced according to the chosen design and produced mechanically, milled and cut using hot wires, with the advantage of both individual and mass production. The advantage of this new material is that it allows you to create shapes with large volumes whilst minimising the weight pressure on the structure. The visible parts of the prefabricated products made using EPS. D30 are treated by applying different membranes. The membrane chosen will depend on the function of the product and the use it is going to be put to. The addition of membranes allows different finishes to be created.
T.R. FLOKACEM, domes This is a new concept which eliminates the heavy weight pressure on the roof framework and results in costs savings due to the ease of construction and the placement for the influence of the minimal weight with relation to the volume. Domes are supplied in different sizes, with different finishes, and can be covered with ceramic tiles or other decorative materials. Products are supplied as a single piece or in various pieces ready to be assembled on-site. The choice between these options depends on their size and the form of transport. Domes can be produced to meet any size specification and in different models and designs for different finishes, ceramics, metals and decoration with resins, paint, etc.
38
7
PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION
T.R. FLOKACEM, window frames, sills and lintels These are frames for doors and windows and are available in different designs. They can be adapted to meet the customer requirements. They add to the architectural design of a building by allowing customers to choose a personalised design in terms of the shape or size.They are easily fitted and have a minimum weight. It is a safe and quick way to add design to a building.
T.R. FLOKACEM, mouldings and cornices These are lightened cornices and mouldings, available in a range of standard models (other designs can be produced on request). They are easy to use and are fixed to surfaces using firstly a type C2 cement adhesive and then applying type D2 cement to the joints to fill them ready for painting.
39
PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION
7
T.R. FLOKACEM , arabian and corbel arches These arabian style arches are used where the design does not allow for thick rendering mortars and therefore a finished product is required, the product is ready to put in place, fill and paint. Corbels and capitals to be placed below balcony floors, as pillar rendering mortars and to shape capitals:
T.R. FLOKACEM , caissons for ventilation cowls This ventilation cowl solves the problems you face when trying to place pieces in hard to reach locations. It also has the advantage of being available in any design. Caissons are produced in different sizes for hotels. Ventilation pipes are also available and can be adapted to each construction and provided in pieces, depending on the height of the different floors used in the construction.
40
7
PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION
T.R. FLOKACEM, capitals and theme decoration
T.R. FLOKACEM, cultural statues
T.R. FLOKACEM, wild animal figures for parks
T.R. FLOKACEM, beam or corbel points, beams and vaults These products are used in interior design to create traditional ceilings consisting of imitation wood beams and imitation stone vaults. They can be adapted to meet any requirements and can also be used as hidden beams, air conditioning pipes and sanitary conduits. We produce wood coffers for use on ceilings.
41
PREFABRICATED PRODUCTS FOR ARCHITECTURAL DECORATION
7
Decorative corbels or caps, in imitation stone and wood, can be placed under the ceiling framework:
T.R. FLOKACEM, decorative products Decorations for Spas and other monumental shapes with different finishes in oxidised iron, decorative paints or distressed using the product Gelco´krete and organic, natural pigments. They can be used to create a cutting edge facade design as well as more traditional designs. They are supplied as pieces that once put together make up the design which can then be placed directly onto a surface, onto the top ring beam or onto ventilation struts.
42
8
CONSTRUCTION ACCESSORIES NON-STRUCTURAL
8. CONSTRUCTION ACCESSORIES, NON-STRUCTURAL This is a new system based on the latest technology consisting of products made from lightened material, in this case high density expanded polystyrene (EPS.D30). This material is adapted to specific designs in question and produced mechanically, milled and cut using hot wires, with the advantage of both individual and mass production. The advantage of these new materials is that they allow you to create shapes with large volumes whilst minimising the weight pressure on the structure. The visible parts of the prefabricated products made using EPS. D30 are treated by applying different membranes. The membrane chosen will depend on the function of the product and the use it is going to be put to. The addition of membranes allows different finishes to be created. T.R. CEMOFLOK , round and horseshoe arches Being prefabricated they offer significant advantages in terms of the perfection of their design and the labour saved in putting them in installation (between 20 and 25 pieces can be fitted per day). The product is made in the chosen design and treated with a reinforced polymer with a glass fibre mesh. They can be made in large sizes, saving weight in the construction. Examples of round arches, finished with a single-layer overlay
Horseshoe arches and other round arches are fitted using a class C2 cement adhesive and placement of the glass fibre mesh in the joints with the surface
43
CONSTRUCTION ACCESSORIES NON-STRUCTURAL
8
T.R. CEMOFLOK, prosthesis for complementary designs These are pieces made to a determined design that add the finishing touches to your design, acting as part of the structure. They are fitted in the same way as traditional materials, with the exception of the use of a class C2 cement adhesive to fix them in place.
T.R. CEMOFLOK, decorative faรงade pieces These are pieces in the form of mouldings and other predefined shapes that are placed on the facade to create a design. They are supplied as finished article, ready to be fitted, filled and painted.
T.R. CEMOFLOK, suspended top slabs This is a product to create the top slab suspension as a way to protect it from rain water.
44
8
CONSTRUCTION ACCESSORIES NON-STRUCTURAL
T.R. CEMOFLOK, pillar covers and hiding of electrical wires and pipes These are pieces in the form of a pillar that can be solid, with an internal structure, or can be used as a cover to hide construction pillars, electrical wires and pipes.
T.R. CEMOFLOK, staircase steps These are pieces in the form of steps and using them can avoid the need to relay bricks. A measurement is taken to calculate the size of the tread and the height of the step, and from this modules are made consisting of three steps that can be fitted to a sloping surface. Fitting is done using class C1 cement adhesive mortar, representing a saving due to the reduced time needed to perfectly fit the product into the design.
45
TREATMENTS FOR DAMP SPACES
9
9. TREATMENTS FOR DAMP SPACES The products making up our damp space treatments form a new concept based on the manufacture of a range of products that are waterproof and heat insulating. This includes a range of panels and modules that can be integrated into a construction. The products are made using lightened high density expanded polystyrene (EPS D30) that is treated with a hydro/polymer on the exposed surfaces, with the addition of reinforced plastic with glass fibre. The products are particularly suitable for bathrooms, spas, saunas and other damp spaces.
PANELCORK T.R, panels These are panels that can be made to any size and thickness, as well as the standard size of 102,362x23,622 in* approx.(*2600x600 mm) with thicknesses of 0,019-0,393-0,787-1,181-1,5741,968-2,362 in* approx.(*0.5-10-20-30-40-50-60 mm). They can be used to divide spaces and add design elements, they can be decorated with ceramics, mosaics, “trecandis� mosaics or marble. they are fitted using class C2 cement adhesive.
46
9
TREATMENTS FOR DAMP SPACES
MODULCORK T.R, prefabricated bathroom modules These modules are produced in the desired design and supplied ready to be fitted and subsequently covered with ceramics, mosaics, “trecandis” mosaics, etc.
47
TruccsaKrete
Centros de producción:
Gran Vía, Urb. Oasis, 30380. La Manga Norte San Javier. Murcia. ESPAÑA Tel. 0034 620 28 35 97 / 0034 968 33 71 63 Fax. 0034 968 58 12 63 E-mail. truccsakrete@gmx.com
Truccsa. Designcork.
C/ Budapest, 42. Pl. Industrial, Cabezo Beaza. 30353.Cartagena. Murcia. ESPAÑA Carretera de Balsicas a los Alcázares, km.2, 30591. Torre Pacheco. Murcia. ESPAÑA E-mail. info@designcork.es