The durable, contemporary timber solution.
Internal
Cover photo: Guipuzcoan Football Federation Project: Izaskun Larzábal Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Eucalyptus
Indoor wood coverings. The natural wood used to manufacture Parklex provides a look of quality and comfort for building interiors from the very first moment. With Parklex, ceilings, walls and floors, in addition to any other surface, such as counter tops, bathrooms and even showers take on a new leading role. If you’re looking for quality and comfort, Parklex has a wide range of natural wood finishes that achieve both purposes. In addition, its variety of finishes allows decorators and architects to be creative with combinations on any type of surface, allowing them to decorate the floors, walls or ceiling in the same wood, providing the degree of quality and comfort that only natural, highquality materials can convey.
Floor, walls and ceiling.
The same colors and finishes throughout the interior.
Parklex paneling may be installed on any surface: floors, walls and ceilings, combining aesthetic elements or keeping the same colors and finishes throughout the interior, converting rooms into authentic enclosures, completely lined with natural wood panels.
Recommended products: 路 Floors:
2000 3000 路 Walls and ceiling: Dry areas:
500 Damp areas:
700
Quality at your feet.
Recommended products: 路 Floors:
2000 3000
The quality of Parklex comes from the materials and processes used to manufacture them. This quality is demonstrated precisely where the product suffers the most wear: floors, transit spaces and areas of intensive use, where any material suffers a high level of wear. Parklex, however, performs at top levels in these areas, with its properties remaining unchanged. Simple maintenance is all that is needed to prolong the life of these coverings, which makes them immediately economical.
It demonstrates its quality where it suffers the most wear.
Silence: another form of comfort.
Recommended products: 路 Walls and ceiling:
500
Noise and reverberation prevention is also a form of comfort. Parklex 500 is designed to be installed as an indoor wall and ceiling covering in locations with high acoustic absorption requirements: conference halls, presentation rooms, auditoriums, offices, etc., as well as furniture coverings. These panels insulate rooms from outside noise or that of nearby areas, providing an even greater feeling of comfort.
Coverings for locations with high acoustic absorption requirements.
Excellent fire behavior. Parklex means peace of mind.
Recommended products: 路 Floors:
2000 路 Walls and ceiling: Dry areas:
500 Damp areas:
700
In addition to being manufactured from natural wood, the entire Parklex line is tested according to the new European standard EN 13.501 regarding reaction to fire, obtaining the best results possible for organic materials. With Parklex, you are sure to make the right decision.
Natural wood with the best results for reaction to fire.
Bathrooms, gymnasiums, spas or pools: don’t relinquish comfort.
Cozy, moisture resistant spaces.
Moisture is a factor that generally determines the materials used in bathrooms. Thanks to the production and treatment processes Parklex uses on natural wood, it is now possible to use Parklex coverings in any area of the bathroom, even in the shower, transforming them into areas that are just as inviting as the rest of the interior. The Parklex line stands out for its moisture resistance, which also allows its problem-free use in gymnasiums, spas or pools, making these areas (and any other space where appearance, hygiene, resistance and cleanliness are important) exclusive places that are both pleasant and totally unique.
Recommended products: · Walls and ceiling: Damp areas:
700 · Floors (bathrooms and gymnasiums):
2000
Parklex Projects
Guggenheim Bilbao Bilbao, Spain. Architect: Frank O. Gehry Project manager: César Caicoya Parklex 2000, Museum Ash
Bilbao, May 14, 2007
Bilbao, 14 de mayo de 2007
Dear Sirs:
Estimados Señores: After ten years of intensive use, withstanding the regular heavy machinery traffic and the exposition of sculptures weighing many tons, we would like to express our satisfaction with the wood floors in the Guggenheim Museum galleries (Manufacturer: Composites Gurea, model Parklex 2000, lightened ash), with regards to both the ease of cleaning and their durability and strength.
Rogelio Diez Maintenance and Installations Supervisor
Tras diez años de funcionamiento intensivo de los suelos de madera en las Galerías del Museo Guggenheim (Fabricante Composites Gurea, modelo Parklex 2000, fresno clarificado), soportando el paso habitual de maquinaria pesada y la exposición de esculturas de gran tonelaje, comunicamos nuestra satisfacción con los mismos, tanto en su facilidad de limpieza como en su durabilidad y resistencia.
Navarran Government Press Room Pamplona, Spain. Architects: Javier Barcos Berruezo and Manolo EnrĂquez JimĂŠnez Parklex 500, Walnut Parklex 2000, Walnut
Marqués de Riscal Hotel The Luxury Collection. Alava, Spain. Architect: Frank O. Gehry Project manager: César Caicoya Parklex 500, Maple Parklex 2000, Maple
Cepa 21 Wineries Valladolid, Spain. Architects: BSA Arquitectos Interior design: TGA+Asociados and Javier Machimbarrena Parklex 500, Maple
Burlada Cultural Center Navarre, Spain. Architect: Miguel Ayate Bariain Parklex 500
Puerta de America Hotel Madrid, Spain. Architect: Jean Nouvel Parklex 2000
Zubieta XXI Sports Complex Guipuzcoa, Spain. Project: Izaskun Larzábal, Fernando Gárate and Agustín Oteiza Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Natural Beech
De la Pe単a Station Bilbao, Spain. Architect: GPD Studio Parklex 500
La Perla Hotel Pamplona, Spain. Architect: Javier MartĂnez Oroquieta Parklex 500, Walnut Parklex 2000, Walnut
Thermae Bath Spa The Minerva Bath. Bath, United Kingdom. Architect: Nicholas Grimshaw & Partners Photography: Matt Cardy Parklex 700, Maple
Guipuzcoan Football Federation Guipuzcoa, Spain. Project: Izaskun Larzábal Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Eucalyptus
Attic in San Sebastian Guipuzcoa, Spain. Interior design: Ver贸nica Conejos Parklex 2000, Museum Ash
COEC, Catalonian Odontologist and Stomatologist Association Barcelona, Spain. Architect: Pere Fosch i Alvarez Parklex 3000, Maple
Beroa Bar Guipuzcoa, Spain. Design: Formak Studio Parklex 2000 (floor) Parklex 3000, Zebrano (bar)
Home in Pamplona Navarre, Spain. Interior design: Héctor Elizaga Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Maple
Air France, VIP Lounge Narita International Airport. Tokyo, Japan. Architect: NoĂŠ Duchaufour-Lawrance Parklex 500, Reconstituted Oak Parklex 2000, Reconstituted Oak
Electronics Arts London, United Kingdom. Architect: Foster + Partners Photography: Nigel Young Parklex 2000, Natural Beech
Amrey Hotel Barcelona, Spain. Architect: Ram贸n Domenech Parklex 2000, Maple
Home in San Sebastian Guipuzcoa, Spain. Interior design: Javier Machimbarrena Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Walnut
Home in Puerto Pollença Majorca, Spain. Architect: Joan Riusech Photography: Susana Aréchaga and Luis M. Ambrós Parklex 2000, Maple
Technical characteristics
About Parklex Production process
Each type of Parklex is subjected to a different production process, depending on its final application: interiors, exteriors, damp areas, etc. The base is always high-density laminated wood with a paper fiber core that has been treated with thermosetting resins and compressed at high pressure and temperature.
Finishes
Perfect adaptation to the project design is an essential requirement. That’s why the technology used to manufacture Parklex allows us to apply different finishes, all in natural wood, to integrate them completely into the environment that is required for each project.
International
Providing service on an international level has meant establishing an extensive network of Parklex distributors on all five continents. This allows us to work more closely with our clients and offer them better service in a way that is more accessible to them. It also lets us understand their needs perfectly and first hand.
Guarantees / Quality Certificates
Rigorous testing guarantees Parklex’s excellent performance.
Natural wood
The surface is always made from 100% natural wood, treated according to its application: to resist special weather conditions or to perfectly resist the intensive use it might receive in interiors.
Range
The variety of finishes and colors in natural and dyed panels sets Parklex apart as a result of its versatility, making it the ideal covering from any type of project.
Architects
The best architects in the world use Parklex in their most emblematic creations. Why is this so? Because they feel comfortable and at ease, and because the results do not disappoint them. Without a doubt, it is because at Parklex we have been working for over 15 years on a daily basis with architects from all over the world, including, for example, Santiago Calatrava, Frank Gehry, Norman Foster, Jean Nouvel and Nicholas Grimshaw, adapting our range to their requirements. This has made Parklex the natural wood covering of choice in many of the best quality and best-known projects in the world. This can only be achieved by a brand with an absolute guarantee, capable of offering the perfect product, totally adapted to their needs, with problem-free application.
Parklex – The ideal solution Quality and performance are only the most visible results of Parklex. As if this weren’t enough, the advantages offered by Parklex are evident from the moment it is installed, up to its long-term maintenance.
Characteristics
Ease of installation.
Maintenance.
The floating flooring system is simple and low-cost. The rest of the products may be easily installed, following clear, professional instructions.
Parklex does not require any sort of scraping or varnishing as part of its maintenance. It need only be lightly cleansed with a mop, using liquid ph-neutral soap and water.
Acoustic absorption.
Service.
Parklex 500 and Parklex 700 may be perforated, making them the ideal materials for acoustic absorption. They have been manufactured specifically for interiors where the acoustic factor is important.
Parklex has a technical support department to answer any questions regarding product assembly and to give advice on the most appropriate type of covering to meet every need.
Strength.
Quality.
Material for intensive use indoor areas is made with the highest quality natural wood panels that have been impregnated using the Gureprex system, which provides a series of benefits with regards to abrasion, moisture resistance, hardness, scratch resistance and dimensional stability that are far superior to any of the varnish-treated products currently found on the market.
Parklex means quality. All our products have earned the CE mark and carry an absolute guarantee. Exterior panels are manufactured according to the European standard EN 438, which applies to HPL (high pressure laminates). This is why Parklex is the covering preferred by the world’s most prestigious architects.
Moisture resistance.
Fire behavior.
The technology used by Parklex to manufacture the exterior coverings completely guarantees them against extreme weather conditions: rain, sun, humidity and heat. This same technology allows us to provide a material for interiors with identical resistance properties. Parklex therefore provides the ideal product for damp areas.
The entire Parklex line is classified according to the new European standard EN 13.501-1:2002 regarding reaction to fire, obtaining the best results possible for organic materials.
Parklex product guide
Damp areas
700 Stratified timber panels for internal use, with high resistance to humidity.
Walls and ceilings
Dry areas
500 Natural timber ceiling and wall finishes.
Internal
Floating parquet
2000 Natural timber floor for extreme wear environments.
Floors
Raised flooring
3000 Natural timber finish for full access raised floors.
External
Faรงades
Facade High-density stratified timber panels for external use.
700
Stratified timber panels for internal use, with high resistance to humidity. Parklex 700 is a high-density stratified natural timber panel, made from kraft paper that has been treated with thermoset resins compressed under high pressures and temperatures, finished with natural timber veneers.
Finish range (1) Panels manufactured from joined timber
veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).
Ambar (2)
Antra (2)
Ayous Natural
Black
Cherry (1)
Copper (2)
Eucalyptus (1)
Museum Ash (1)
Gold (2)
Grey Beech (1)
Natural Beech (1)
Green Beech (1)
Maple (1)
Walnut (1)
Onix (2)
Quartz (2)
Natural Oak (1)
Reconstituted Oak (1)
Rubi (2)
Sapelli (1)
Silver (2)
Wengue (1)
Natural Zebrano (1)
Surface characteristics (2) Available only in a Smooth surface finish.
Woodskin速. A finish that allows you to feel the grain and subtlety of natural timber.
Special finishes Smooth. Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.
Assembly systems * Chequerplate Rubber
Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure.
Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins.
Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure.
Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.
* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).
Smooth Rubber
Chequerplate (3)
Perforated
Panel construction Moisture resistant overlay Natural timber veneer HPL core Natural timber veneer Balancing film HPL core
Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Technical characteristics Thickness ≥ 6mm
Tests
Stand
Property or attribute
Measurement unit
1. Inspection Colour, pattern and surface finish
Result Parklex 700 CGS (Standard)
Parklex 700 CGF (Fire Class)
Rev: 03 (09.2009)
Rev: 03 (09.2009)
EN 438-8 Part 5.2.2.3
Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood.
EN 438-2 Part 5
6,0 ≤ t < 8,0
2. Dimensional tolerances Thickness (t)
± 0,40
mm
8,0 ≤ t < 12,0
± 0,50
12,0 ≤ t < 16,0
± 0,60
16,0 ≤ t < 20,0
± 0,70
20,0 ≤ t < 25,0
± 0,80
Length and width
EN 438-2 Part 6
–
mm
+10 / - 0
Edge straightness
EN 438-2 Part 7
–
mm/m
1,5
Edge squareness
EN 438-2 Part 8
–
mm/m
1,5
EN 438.-2 Part 17
Cumulative dimensional change (t≥6_mm)
% max Longrain
0,3
3. Physical properties Dimensional stability at elevated temperatures
% max Crossgrain Resistance to impact with large diameter ball
EN 438-2 Part 21
Maximum height for which no visible surface cracking or imprint greater than 10mm (t≥ 6mm)
Tensile strength
EN ISO 527-2
Longrain
0,6
mm
≥ 1.800
MPa
≥ 60
µ
110
N
> 2.000
Crossgrain
4. CE Safety requirements Water vapour permeability
EN 438-7 Part 4.4
Wet cup method Dry cup method
Resistance to fixings
EN 438-7 Part 4.5
Screw holding value t ≥ 6_mm
250
FScrew holding value t ≥ 8_mm
> 3.000
Screw holding value t ≥ 10_mm
> 4.000
Release of formaldehyde
EN 438-7 Part 4.11
Classification
Rating
E1
Flexural strength
EN ISO 178
Longrain
MPa
≥ 80
MPa
≥ 9.000
≥ 80
Crossgrain Flexural Modulus
EN ISO 178
Resistance to inmersion in boiling water
EN 438-2 Part 12
Longrain
≥ 9.000
Crossgrain
Density
EN ISO 1.183
Moisture absorbed
%
≤2
Moisture absorbed
%
≤2
Appear
Degree
Density
g/cm3
Euroclass t ≥ 6_mm
Classification
Thickness* - Smooth finish
3, 6, 8, 10, 12,14, 18 & 22 mm
Thickness* - Chequerplate finish
10, 12,14, 18 & 22 mm
≤3 ≤6 ≥4 ≥ 1,35
5. CE Safety requirements - Reaction to fire Reaction to fire
EN 13.501-1
Panel dimensions Length (grain direction) x width
2440 x 1220 mm
* 3 and 6 mm can only be used for special applications. Other thicknesses may be available upon request.
C-s2,d0
B-s2,d0
500
Natural timber ceiling and wall finishes.
Parklex 500 is a timber panel manufactured from 100% natural timber fibres, pressed under high temperatures and impregnated with thermoset resins using our exclusive Gureprex system.
Finish range (1) Panels manufactured from joined timber
veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).
Ambar
Antra
Ayous Natural
Bamboo (1)
Black
Cherry (1)
Eucalyptus (1)
Museum Ash (1)
Grey Beech (1)
Natural Beech (1)
Green Beech (1)
Maple (1)
Walnut (1)
Onix
Natural Oak (1)
Reconstituted Oak (1)
Rubi
Sapelli (1)
Wengue (1)
Natural Zebrano (1)
Surface characteristics
Panel construction
Woodskin速. A finish that allows you to feel the grain and subtlety of natural timber.
Gureprex wear resistant overlay Natural timber veneer Resin bonded WBP plywood core HPL balancer Wood
Acoustics
Assembly systems * Parklex 500 acoustic is designed for interior wall and ceiling finishes requiring high levels of acoustic absorption. It is machined in different forms and dimensions allowing for the desired level of acoustic performance.
Slots
Perforated
Exposed fastening. The Parklex panels are fastened with stainless steel screws or rivets to the treated wood or metal substructure.
Hidden fastening, with special hanging profiles. The Parklex panels are attached to the aluminum substructure, using guide profiles and hanging pins.
Hidden fastening, using adhesive. The Parklex panels are fastened using adhesive to the treated wood or metal substructure.
Hidden fastening, with caps. The Parklex panels are attached with screws hidden by caps with a diameter of 10,75mm and a section of 2mm, using the same material and finish as the panel.
* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).
Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Technical characteristics Thickness ≥ 8mm
Tests
Standard
Property or attribute
Measurement unit
1. Inspection requirements Colour, pattern and surface finish
EN 438-8 Part 5.2.2.3
Result Parklex 500 VDS (Standard)
Parklex 500 VDF (Fire Class)
Rev: 03 (09.2009)
Rev: 03 (09.2009)
Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood
2. Dimensional tolerances Thickness (t)
EN 438-2 Part 5
t = 6,0
mm
+1,0 / -0,6
t = 8,0
+1,6 / -1
+1,0 / -0,7
t = 11,0
+1,4 / -1,1
+1,2 / -0,8
t = 14,0
+1,6 / -1,1
+1,3 / -0,9
t = 17,0
+1,3 / -1,3
+1,4 / -1,0
t = 20,0
+1,3 / -1,1
+1,6 / -1,2
t = 40,0
+2,0 / -1,6 mm
≤0,6
–
mm
+10 / - 0
–
mm/m
1,5
EN 438-2 Part 8
–
mm/m
1,5
EN 438-2 Part 10
Resistance to surface wear
Initial wear point
≥ 50
Wear resistance
≥ 150
Tolerance for thickness variations inside a panel
EN 315:1993
Length and width
EN 438-2 Part 6
Edge straightness
EN 438-2 Part 7
Edge squareness
t (nominal thickness)
3. Physical properties Revolutions Resistance to surface wear
Resistance to inmersion in boiling water
EN 438-2 Part 12
Aspect
Rating
≥4
Resistance to scratching
EN 438-2 Part 25
Force
Rating
≥2
Lightfastness (xenon arc)
EN 438-2 Part27
Contrast
Grey scale rating
≥4 < 4 (A) ≥ 70
Longitudinal direction Flexural strength
Flexural modulus
EN 310
MPa Transversal direction
≥ 60
Longitudinal direction
≥ 7000
EN 310
MPa
≥ 6000
Transversal direction Perpendicular tensile strength
ASTM C 297
Density
-
Adhesion force
MPa
Density
g/cm3
≥2 ≥ 0,75
≥ 0,80
4. CE Safety requirements Resistance to fixings
EN 438-7 Part 4.5
Force
N/mm
≥ 200
≥ 130
Bonding strength
EN 438-7 Part 4.7
Bond strength
MPa
≥ 1,42
≥ 2,64
Flexural tensile strength
EN 438-7 Part 4.8
Bond strength
MPa
≥ 1,42
≥ 2,64
Content of pentachlorophenol
EN 438-7 Part 4.10
Release of formaldehyde
EN 717-2
Glue-line quality
≤5
Content pentachlorophenol
ppm
Release of formaldehyde
Rating
EN 438-7 Part 4.13.3
Expression of results
Rating
Resistance to elevated temperature
EN 438-7 Part 4.13.3
Aspect
Result
Water resistance
EN 438-7 Part 4.13.3
Thickness increase
%
≤7
Euroclass t ≥ 8mm
Classification
D-s3,d0
–
Euroclass t ≥ 14mm
Classification
–
B-s2,d0
E1 5
3 No damage ≤ 2,5
(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak
5. CE Safety requirements - Reaction to fire Reaction to fire
EN 13.501-1
Panel dimensions Length (grain direction) x width * Other thicknesses may be available upon request.
2440 x 1220 mm
Thickness*
8, 11, 14, 17, 20 & 26 mm
2000
Natural timber floor for extreme wear environments. Parklex 2000 is a natural timber floating floor made from the highest quality veneers, impregnated using our exclusive Gureprex system. This provides extraordinary qualities of dimensional stability and resistance to both abrasion and humidity.
Finish range (1) Panels manufactured from joined timber
veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).
Ambar
Antra
Ayous Natural
Bamboo (1)
Black
Cherry (1)
Eucalyptus (1)
Museum Ash (1)
Grey Beech (1)
Natural Beech (1)
Green Beech (1)
Maple (1)
Walnut (1)
Onix
Natural Oak (1)
Reconstituted Oak (1)
Rubi
Sapelli (1)
Wengue (1)
Natural Zebrano (1)
Surface characteristics
Maintenance and cleaning
Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.
Resistance to abrasion Resistance to abrasion
Maintenance. The non-porous nature of the surface prevents the penetration of dirt. Parklex 2000 requires no specific stripping or re-finishing.
Cleaning. Mop with water and (neutral) gel soap.
Assembly systems *
AC4
Floating parquet. Floating installation of boards glued tongue-in-groove over a layer of insulation.
Glued. Installation of tongue-in-groove boards that are adhered to waterproof DM, using lines of adhesive.
Parquet over underfloor heating. Installation as floating parquet over underfloor heating.
Panel construction Gureprex wear resistant overlay Natural timber veneer
* For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).
Resin bonded WBP plywood core HPL balancer Wood
Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Technical characteristics Thickness ≥ 11 mm
Tests
Standard
Property or attribute
Measurement unit
Result Parklex 2000 HDS (Standard)
1. Inspection requirements Colour, pattern and surface finish
Rev: 04 (09.2009)
EN 438-8 Part 5.2.2.3
Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood
2. Dimensional tolerances Gap between pieces
EN 13.329
–
mm
≤ 0,2
Leap between pieces
EN 13.329
–
mm
≤ 0,15
3. Physical properties ≥ AC4
Resistance to surface wear
EN 438-2 Part10
Initial point (PI)
Revolutions
Resistance to inmersion in boiling water
EN 438-2 Part 12
Aspect
Rating
≥4
Impact resistance (small diameter ball)
EN 438-2 Part 20
Force resort
N
≥ 10
Resistance to scratching
EN 438-2 Part 25
Force
Rating
≥3
Resistance to stain
Lightfastness (xenon arc)
EN 438-2 Part26
EN 438-2 Part27
≥ 4.000
Rating (Group 1 & 2)
≥5
Rating (Group 3)
≥4
Aspect
Contrast
≥4
Grey scale rating
< 4 (B) Resistance to cigarettes burn
EN 438-2 Part 20
Flexural strength
EN 310
Aspect
≥4
Rating
≥ 70
Longrain
Flexural modulus
MPa Crossgrain
≥ 60
Longrain
≥ 7000
EN 310
MPa
≥ 6000
Crossgrain Density
-
Density
g/cm3
≥ 0,75
≤5
4. CE Safety requirements Pentachlorophenol content
EN 438-7 Part 4.10
Content pentachlorophenol
ppm
Release of formaldehyde
EN 717-2
Release of formaldehyde
Rating
E1
Electric resistance
EN 1.081
Vertical resistance
M_
825 (antiestático)
Tendency to accumulation electrostratic charges
EN 1.815
Potential difference
KV
<2
Thermal conductivity
EN 12.524
Conductivity
W/(m*K)
0,17
Water tightness
EN 13.553
Water penetration
Watertight
Slide
EN 13.893
Dynamic coefficient of friction
Classification _
Slip/skid resistance
UNE-ENV 12.633
Slip resistance value
USRV(Rd)
Clase 1
Euroclass t ≥ 11mm
Classification
Bfl-s1
0,73 (D5)
(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak
5. CE Safety requirements - Reaction to fire Reaction to fire
EN 13.501-1
Package measurements Contents per package Minimum no. Panels m2 Kg Maximum contents per pallet No. panels No. packages m2 Kg
2440 x 188 x 14 mm* 8 3,68 40
2440 x 290 x 14 mm* 1 0,71 9,5
2440 x 590 x 14 mm* 1 1,44 17
192 24 88,3 960
84 – 59,7 800
42 – 60,7 800
* Standard thickness 14mm. Other thicknesses may be available upon request.
3000
Natural timber finish for full access raised floors. Parklex 3000 is a high-density stratified timber panel, impregnated using our exclusive Gureprex system. It may be adhered to any type of support material (fibreboard, MDF, fibre cement, galvanised steel etc.) normally used to construct full access floors.
Finish range (1) Panels manufactured from joined timber
veneers. There may be as many as 12 veneer pieces in each full panel (16 in the case of stained finishes).
Ambar
Antra
Ayous Natural
Bamboo (1)
Black
Cherry (1)
Eucalyptus (1)
Museum Ash (1)
Grey Beech (1)
Natural Beech (1)
Green Beech (1)
Maple (1)
Walnut (1)
Onix
Natural Oak (1)
Reconstituted Oak (1)
Rubi
Sapelli (1)
Wengue (1)
Natural Zebrano (1)
Surface characteristics
Assembly systems *
Matt. A finish that provides a high quality, comfortable surface appearance that only authentic natural timber can provide.
Hidden fastening, using adhesive. The Parklex panels are attached to different types of supports, using adhesive. * For more information on installation, consult the Internal Parklex Assembly Catalogue or our web page (www.parklex.com).
Panel construction
Gureprex wear resistant overlay Natural timber veneer HPL balancer Wood
Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Technical characteristics Thickness 1 mm
Tests
Standard
Property or attribute
Measurement unit
Result Parklex 3000 HGS
1. Inspection requirements Colour, pattern and surface finish
Rev: 03 (09.2009)
EN 438-8 Part 5.2.2.3
Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure differences are considered as normal. Singularities such as knots and resin inclusions are not considered as defects, but as a part of the décor. There are differences in light fastness performances depending on the wood species and the source of the wood
2. Dimensional tolerances Thickness (t)
EN 438-2 Part 5
t = 1 mm
mm
± 0,15
Length and width
EN 438-2 Part 6
–
mm
+10 / - 0
Edge straightness
EN 438-2 Part 7
–
mm/m
1,5
Edge squareness
EN 438-2 Part 8
–
mm/m
1,5
Planimetry
EN 438-2 Part 9
–
mm/m
120
Revolutions
0
EN 438-2 Part 10
Resistance to surface wear
Abrasion class
AC4
Initial point
≥ 4.000
Delamination
Pass/ No pass
Pass
Longitudinal
% max
0,75
Transversal
% max
1,25
N
≥ 10
3. Physical properties
Resistance to surface wear
Resistance to inmersion in boiling water
EN 438-2 Part 12
Dimensional stability at high temperatures
EN 438-2 Part17
Impact resistance (small diameter ball)
EN 438-2 Part 20
Force ressort
Resistance to scratching
EN 438-2 Part 25
Force
Resistance to stain
Lightfastness (xenon arc)
EN 438-2 Part26
Rating
≥3
Grupos 1 & 2
≥5
Grupo 3
≥4
Aspect
EN 438-2 Part27
Contrast
Grey scale rating
≥4 < 4 (A)
Resistance to cigarette burns
EN 438-2 Part 30
Aspect
Rating
≥2
Density
EN ISO 1.183
Density
Classification
≥ 1,1
Euroclass
Classification
D-s2,d0 (B)
(A) Maple; Bryna; Ayous Natural; Cherry; Natural Beech; Reconstituted Oak
4. Reaction to fire Reaction to fire
EN 13.501-1
(B) Composite panels made by a non FIRE RETARDANT HPL adhered to a non fireproof wood substrate.
Panel dimensions * Standard - Length (grain direction) x width
610 x 610 mm
Maximum - Length (grain direction) x width
2440 x 1220 mm
* Special dimensions available for other applications, upon request.
Thickness
1 mm
Other Parklex products
Facade
External
High-density stratified timber panels for external use. Parklex Facade is a high-density stratified timber panel manufactured from kraft paper treated with resins thermoset under high pressure and temperature, finished with natural timber veneers highly resistant to UV radiation and atmospheric agents.
Parklex Facade includes Everlook速, a special overlay that dramatically increases the normal life of the panel, improving UV resistance and colour stability. It also allows for the development of new panels with an extensive range of finishes.
Finish range
Ambar
Antra
Copper
Gold
Surface characteristics
Onix
Quartz
Rubi
Silver
Panel construction PVDF Antigraffiti overlay
Smooth. Traditional Parklex finish. Reveals the simple, natural beauty of the wood it is manufactured with.
Everlook
Natural timber veneer HPL core Natural timber veneer Balancing film HPL core
NOTE. For more information about this product, consult the External Parklex Catalogue, the External Parklex Assembly Catalogue or our web page (www.parklex.com).
Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations of printed media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklex recommends consulting our sales personnel to request actual samples.
Applications
1.
2.
3.
1. Semilcos
head office
Vicenza, Italy. Architect: Pollini+Smania 2. Hospital
Korea. Architect: Seo hae-cheon 3. Children
Museum
Ireland. Architect: Traynor O’Toole 4. Alhambra
4.
Information points
Granada, Spain. Architect: Francisco Martínez Manso, Rafael Soler Márquez
Facade 700 500 2000
EN/v04/0912
3000
ER-0370/2003
www.parklex.com COMPOSITES GUREA, S.A. [t ] +34 948 625 045 [f ] +34 948 625 015 Zalain auzoa, 13
31780 Vera de Bidasoa Navarra (Spain)
parklex@parklex.com