TE Connectivity Industrial Solutions Guide
Reach your local sales team: sales@de.ttiinc.com TTI, Inc. – A Berkshire Hathaway Company | ttieurope.com
TE Connectivity’s AMP and DEUTSCH Components
AMPSEAL
AMPSEAL 16
Unsealed AMP MCP
Circular DIN
HDSCS
LEAVYSEAL
SUPERSEAL 1.0
DEUTSCH AEC
Page 6
Page 6
Page 7
Page 7
Page 8
Page 8
Page 9
Page 9
2
TE Connectivity’s AMP and DEUTSCH Components
DEUTSCH DRB
DEUTSCH DRC
Page 10
Page 10
DEUTSCH DT
DEUTSCH DTHD
DEUTSCH HD10
DEUTSCH HD30 and HDP20
Page 12
Page 11
Page 12
Page 13
DEUTSCH Sealed PCB Enclosures and Headers
Jiffy Splices Page 14
Page 14
3
Field Proven Components for Tough Environments Field proven on challenging factory floors where dirt, temperatures and humidity can fail lesser connectors, TE Connectivity (TE) components are just as reliable in the disinfected pressure cooker of a surgical operating room. Whether your needs are connectors that can survive multiple washdown cycles in food processing or need to be reliable because of the difficulty in replacing a failure at the top of a 200-foot tall wind turbine, TTI and TE have the connectors that fit your design.
Tasty Industrial Options for Food Processing Because these industrial grade connectors are designed with environmental sealing features, they are perfect for equipment in washdown areas. Situations where frequent sanitation processes can subject the connection to harsh chemicals, extreme temperatures and moisture call for heavy-duty TE connectors.
The Right Rx for Medical Equipment
The Right choice for Alternative Energy Systems
TE Connectivity manufactures several types of connectors designed for diagnostic applications. The DEUTSCH HD10 Series feature multiple contact arrangements, environmental sealing and the optional ability to color code the body and coupling ring for ease of proper mating.
In a field of solar panels, or a forest of wind turbines, TE connection systems provide dependable circuits in areas where a failure means downtime and difficult, hazardous replacement. 200-feet in the air or in a 120-degree desert aren’t places where maintenance is easy. TE connectors keep the energy flowing.
4
Build a Better Robot
Go-anywhere Performance in Portable Power Systems Portable power generators can be found attached to the back of an RV, at a campsite, or powering a field hospital. In weather emergencies when available utility power may not be available, reliability is a must. TE connectors ensure the juice gets where it needs to go, under all conditions.
Harness Real Performance for Commercial Wire Goods
Industrial robots can be tough on connectors. Repetitive motion stress, industrial environments, vibration, heat from welding – the environmental challenges can be difficult for ordinary connectors to survive. Field proven TE connectors are designed to stand up to these hazards and perform day after day.
Sign These Up for Digital Billboards
Building wiring harnesses for industrial and commercial applications means your finished product is only as good as its weakest link. With TE industrial connectors from TTI you’re assured that connectors are not that link. You won’t go wrong specifying TE, and with TTI you know those components will be where you need them, when you need them.
5
Sign painters hanging from scaffolding have been replaced by pixels and bright clear images that can be changed out in an instant from virtually anywhere. Provided, of course, that the sign has TE connectors behind the electronics. Built to combat outdoor extremes, moisture, heat, cold, humidity and gale force vibrations, TE connection systems are on the job 24/7/365.
AMPSEAL 16
AMPSEAL AMPSEAL connectors provide rugged reliability and environmental sealing. They are available in cable plugs and PCB mount headers that are designed to stand up to high temperature, underhood applications.
The AMPSEAL 16 connector system is targeted for off-road, heavy-duty industrial, recreational and agricultural applications. This wire-to-wire and wire-to-device connector line is designed to meet the rigorous demands of an industry that requires the highest standards in performance.
The pre-assembled receptacle housing connector features built-in contact sealing and an integral interfacial seal that protects mated connectors. Application: Sealed Wire-to-Board
Application: Sealed Wire-to-Wire
Performance Specifications
Performance Specifications
Plating Gold Tin
Sizes (Positions)
Wire Range
8, 14, 23, and 35 16 - 20 AWG
Current
Temperature
Sizes (Positions)
Wire Range
Current
Temperature
17 A
-40°C to +125°C
2, 3, 4, 6, 8 and 12
14 - 20 AWG
13 A
-40°C to +125°C
8A
-40°C to +105°C
Durability
Insulation Resistance
Immersion
Voltage
Durability
Insulation Resistance
Immersion
Voltage
10 Cycles
10 Megohms
IP67
250 VAC
50 Cycles
20 Megohms
IP67
250 VDC
Material Specifications Wire Seal
Mating Seal
Material Specifications Cover
Silicon Rubber Silicon Rubber Glass-filled PBT
Locking Wedge
Flammability
Wire Seal
Plug Peripheral Seal
Housing
PBT
UL94 V-0
Silicon Rubber
Silicon Rubber
15% Glass-filled Thermoplastic
CPA
PLR
Flammability
15% Glass-filled Thermoplastic
15% Glass-filled Thermoplastic
UL94HB
Product Features • • • • •
1.3mm Contact System (Lanceless Contacts) Tin and Gold Plating Options for Contacts Vertical and Right-angle Header Options Sealing Plugs Available for Unused Cavities Wire Relief Covers (Backshells) Available for Receptacle Housings • Multiple Colors Available for Different Keying Versions • AMPSEAL Wire Seal Fully Sealed Prior to Terminal Population • Integrated Wedgelock Confirms Contact Alignment and Retention
TE Product Specs: 108-1329
Product Features • HDSF Size 16 Contact System • Nickel and Gold Plating Options for Contacts • Connectors Come Fully Assembled with Integrated Wedgelock and Secondary Locking System • Sealing Plugs Available for Unused Cavities • Strain-relief Backshell Covers Available for Plug and Cap Connectors in 90˚ and 180˚ • Four Colors and Polarization Keys Available • Mounting Clip Compatible • End Caps Standard on all Connectors 6
TE Product Specs: 108-2184
Unsealed AMP MCP
Circular DIN
AMP MCP unsealed housing connectors feature 6 to 36 cavity arrangements available with a locking latch or lever latch mating mechanism. AMP MCP housing accepts size 2.8 and 1.5K contacts.
These Circular DIN connectors are designed to meet the requirements of the DIN 72585/ISO 15170 standards. They feature a coupling ring for mating. Circular DIN connectors are suitable for in-line, flange mount or PCB applications.
Application: In-cabin Applications
Application: Wire-to-Board/Wire-to-Device/Wire-to-Wire
Performance Specifications
Performance Specifications
Plating
Sizes (Positions)
Tin
6 to 21
Silver
25 and 36
Plating
Durability
Tin
10 Cycles
Silver
50 Cycles
Wire Range
Current
Temperature
0.75 - 4.0 mm2 Up to 31 A -40°C to +120°C Insulation Resistance
Immersion
Voltage
500 VDC
IP30
28 VDC
Material Specifications Plating Tin Silver
Sec Lock PBT GF 15
Wire Range
Current
Temperature
2, 3, 4, 5, 6 and 7
0.2 - 4.0 mm2
40 A
-40°C to +120°C
Durability
Insulation Resistance
Immersion
Voltage
20 Cycles
1000 VDC
IPX7, IPX9K
1000 VAC
Material Specifications Flammability
Flange Seal
Housing
PBT GF 15
Silicon Rubber
Glass-filled PBT and PA
UL 94V-0 Options
Product Features
Product Features
• Accepts Contact Size 1.5mm (up to 30 amps) and 2.5mm (up to 40 amps) • 2, 3, 4, 5, 6 and 7 Cavity Arrangements • In-line, Flange or PCB Mount • Circular, Thermoplastic Housing • Coupling Ring for Mating
• • • • •
Modular System Polarized to Prevent Improper Mating Inline, Bulkhead, PCB Mount Options Mating Aid to Reduce Mating Force Integrated Secondary Lock Confirms Contact Alignment and Retention • Flame Retardant Material Options • Mechanical and Color Keyed
TE Product Specs: 108-18619-3
Sizes (Positions)
7
TE Product Specs: 108-18621 and 108-18622
HDSCS
LEAVYSEAL
The HDSCS connectors offer several cavity arrangements and mixed wire sizes. The rugged, thermoplastic connectors have a secondary lock with poke-yoke feature and can be used for in-line or flange mount applications. HDSCS connectors are available in five housing sizes and four keying options.
The rugged LEAVYSEAL connectors are multi-pin and accept multiple wire sizes. LEAVYSEAL products utilize a lever lock system for mating and are available in several mounting styles and keying options. The housings come in seven sizes and feature an integrated cable attachment.
Application: Sealed Wire-to-Wire and Bulkhead
Application: Sealed Bulkhead and Wire-to-Device
Performance Specifications
Performance Specifications
Plating Gold Silver Tin
Sizes (Positions)
Wire Range
2, 3, 4, 6, 7, 8, 10, 6.0 - 0.2 mm2 12, 15, 16 and 18
Plating
Durability
Gold
100 Cycles
Silver
50 Cycles
Tin
10 Cycles
Current
Temperature
Plating Gold
Up to 40 A
-40°C to +140°C
Silver Tin
Insulation Resistance
Immersion
500 VDC
IP67 IP69k with covers
Voltage
Up to 60 VDC
Material Specifications
Sizes (Positions) Wire Range
Current
Temperature
15, 18, 21, 22, 26, 29, 31, 39, 46, 62, 6.0 - 0.2 mm2 92 and 120
40 A
-40°C to +140°C
Insulation Resistance
Immersion
Voltage
500 VDC
IP69K
Some up to 42 VDC
Plating
Durability
Gold
100 Cycles
Silver
50 Cycles
Tin
20 Cycles
Material Specifications
Flange Seal
Seal for Secondary Locking
Housing
Flange Seal
Housing
Silicon Rubber
Silicon Rubber
Glass-filled PBT
Silicon Rubber
Glass-filled PBT
Secondary Locking
Slide Lock
Flammability
Secondary Locking
Flammability
Glass-filled PBT
Glass-filled PBT
UL 94 V0
Glass-filled PBT
Two Material Options Available: HB Materials and UL 94 V0
Product Features
Product Features
• Accepts Contact Sizes 6.3/4.8K (up to 40 amps), 2.8 (up to 40 amps), and 1.5K (up to 20 amps) • Tin, Silver and Gold Contact Plating Options • Integrated Secondary Locking System • Free-hanging and Bulkhead Options for Most Sizes • Wire Covers with Tubing Adaptors are Available • Multiple Colors with Polarization Keys • Different Contact Sizes for Signal and Power Needs in Same Housing
• Accepts Contact Sizes 6.3/4.8K (up to 40 amps), 2.8 (up to 40 amps) and 1.5K (up to 20 amps) • Tin, Silver and Gold Contact Plating Options • Integrated Secondary Locking System • Available Wire Routing Covers with Tubing Adaptors • Multiple Colors with Polarization Keys • PCB Headers Available for Some Sizes • Options for Corrugated Tubes and Multi-core Wires • Lever for Ease of Mating and Un-mating High Cavity Arrangements
TE Product Specs: 108-94020
8
TE Product Specs: 108-18696
SUPERSEAL 1.0
DEUTSCH AEC
The Superseal 1.0 mm connectors are designed to meet the increasing need for dependable printed circuit board applications in harsh environments. The Superseal headers are available with straight or right-angle pins. Various locking latch options and keying configurations are available.
DEUTSCH AEC connectors are environmentally sealed, heavy-duty electrical connectors that accept size 16 DEUTSCH contacts. The AEC connectors are constructed of rugged thermoplastic and offer several keying options.
Application: Sealed Wire-to-Board
Application: Cable-to-Cable
Performance Specifications
Performance Specifications
Sizes (Positions)
Wire Range
Current
Temperature
Sizes (Positions)
Wire Range
Current
Temperature
26, 34 and 60
1.25 - 0.50 mm2
15 A
-40°C to +125°C
40
2.0 - 0.50 mm2
13A
-55°C to +125°C
Durability
Insulation Resistance
Immersion
Voltage
Durability
Insulation Resistance
Immersion
Voltage DWV
25 Cycles
100 Megohms
IP67
250 V AC/DC
100 Cycles
1000 Megohms
IP68
1500 VAC
Material Specifications
Material Specifications
Grommet
Housing
TPA
Grommet
Jackscrew
Plug Threaded Inserts
Silicon Rubber
Thermoplastic
Thermoplastic Polyester
Silicon Rubber
Stainless Steel
Stainless Steel
Product Features • • • • • •
1.0 mm Contact System Gold Plated Contacts Vertical and Right-angle Header Options Sealing Plugs Available for Unused Cavities Multiple Polarization Options 2-Row Plug Available for Narrow Packaging Applications
TE Product Specs: 108-78140
Receptacle Threaded Inserts
Shell
Stainless Steel/ Brass
Glass-filled PEI
Product Features • • • • •
9
Accepts Contact Size 16 (13 amps) 40 Cavity Arrangement In-line Mount Square, Thermoplastic Housing Jackscrew for Mating
DEUTSCH DRB
DEUTSCH DRC The environmentally sealed DEUTSCH DRC connectors are a rectangular connector series that offers insert arrangements of 24, 40, 50, 60, 64 and 70 cavities and accept size 16 and 20 DEUTSCH contacts. Several mounting options are available including in-line, flange mount and PCB mount.
DEUTSCH DRB connectors are heavy-duty connectors suitable for bulkhead applications. They are designed to accommodate multiple wire gauges and feature high pin counts, including 48, 60, 102, and 128 cavities. To increase the design flexibility, the DRB connectors offer several mounting flange options and wire arrangements.
Application: Sealed Wire-to-Wire
Application: Wire-to-Wire, Wire-to-Board and Wire-to-Device
Performance Specifications
Performance Specifications
Sizes (Positions)
Wire Range
Temperature
Durability
Sizes (Positions)
Wire Range
Temperature
48, 60, 102 and 128
16.0 - 0.35 mm2
-55°C to +125°C
100 Cycles
24, 40, 50, 60, 64 and 70
2.50 - 0.35 mm2
-55°C to +125°C
Insulation Resistance
Immersion
Voltage DWV
Durability
Insulation Resistance
Immersion
Voltage DWV
1000 Megohms
IP68
1500 VAC
100 Cycles
1000 Megohms
IP68
1500 VAC
Material Specifications
Material Specifications
Flange Body
Flange Clip
Grommet
Grommet
Insert Retainer
Jackscrew
Glass-filled PA
Spring Steel
Silicon Rubber
Silicon Rubber
Unfilled PEI
Stainless Steel
Jackscrew
Shell
Wedgelocks
Receptacle Threaded Inserts
Shell
Stainless Steel
Glass-filled PA
Glass-filled PBT
Stainless Steel/Brass
Glass-filled PA, Glass-filled PPS
Product Features
Product Features
• Accepts Contact Sizes 4 (100 amps), 8 (60 amps), 12 (25 amps), 16 (13 amps), and 20 (7.5 amps) • Flange Mount • Rectangular, Thermoplastic Housing • Jackscrew for Mating • Wedgelocks Confirm Contact Alignment and Retention
• Accepts Contact Sizes 16 (13 amps) and 20 (7.5 amps) • In-line, Flange, or PCB Mount • Rectangular, Thermoplastic Housing • Jackscrew for Mating
10
DEUTSCH DT DEUTSCH DT, DTM, DTMH and DTP environmentally sealed connectors are designed for cable-to-cable and cable-to-board applications. They are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture.
DEUTSCH DTM connectors offer solutions for smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi-pin connectors. The DTM connectors offer the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
DEUTSCH DT connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements and design flexibility. The DT connectors offer the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.
DEUTSCH DTP connectors provide solutions for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin connectors. The DTP connectors offer the designer the ability to use multiple size 12 contacts, each with 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.
DEUTSCH DTMH connectors are environmentally sealed, high temperature connectors capable of operating in temperatures from -55° to +150°.
Application: Sealed Wire-to-Wire Performance Specifications Series DT DTM DTMH DTP
Sizes (Positions) 2, 3, 4, 6, 8 and 12
Wire Range
Temperature
Durability
Insulation Resistance
Immersion
Voltage
100 Cycles
1000 Megohms
IP68
1500 VAC
-55°C to +125°C 6.0 - 0.35 mm2
2 and 4
-55°C to +150°C -55°C to +125°C
Material Specifications Grommet
Receptacle Interfacial Seal
Receptacle Threaded Inserts
Shell
Wedgelocks
Silicon Rubber
Silicon Rubber
Stainless Steel
Glass-filled PA
Glass-filled PBT
Product Features • Wedgelocks Confirm Contact Alignment and Retention • Mounting-Clips are Available • DT Detector Connectors are Available for 12 and 24 Volt Applications
• Size 16 Contacts • Tin, Nickel and Gold Plating Options • In-line, Flange Mount, and PCB Options
TE Product Specs: 108-151009/108-151010
11
DEUTSCH DTHD
DEUTSCH HD10
DTHD connectors are single terminal connectors for heavy-duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, fieldserviceable alternative to a splice. DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.
The DEUTSCH HD10 connectors are an environmentally sealed, thermoplastic, and cylindrical connector series. With arrangements from 3 to 9 cavities, HD10 connectors accept size 4, 12 or 16 contacts and are available either in-line or flanged. HD10 connectors are heavily used for diagnostic applications.
Application: Sealed Wire-to-Wire
Application: Sealed Wire-to-Wire
Performance Specifications
Performance Specifications
Sizes (Positions)
Wire Range
Temperature
Durability
Sizes (Positions)
Wire Range
Temperature
4, 8 and 12
6.0 - 0.35 mm2
-55°C to +125°C
100 Cycles
3, 4, 5, 6 and 9
13.0 - 0.50 mm2
-55°C to +125°C
Insulation Resistance
Immersion
Voltage DWV
Durability
Insulation Resistance
Immersion
Voltage DWV
1000 Megohms
IP68
1500 VAC
100 Cycles
1000 Megohms
IP68
1500 VAC
Material Specifications
Material Specifications
Grommet
Shell
Silicon Rubber
Thermoplastic PEI
Grommet
Insert Retainer
Receptacle Interfacial Seal
Shell
Silicon Rubber
Thermoplastic
Silicon Rubber
Thermoplastic
Product Features
Product Features
• Accepts Contact Sizes 4 (100 amps), 8 (60 amps) and 12 (25 amps) • One Cavity Arrangement • In-line or Flange Mount • Circular, Thermoplastic Housing • Integrated Latch for Mating • Available Accessories: Mounting Clips
• Size 16, 12 and 4 Contacts • In-line, Flange or PCB Mount • Backshells, Boots, Dust Caps, Gaskets, Lanyards and Mounting Clips are Available • Coupling Ring for Mating • Strain-reliefs are Available
12
DEUTSCH HD30 & HDP20 The HD30 and HDP20 connectors are heavy-duty, environmentally sealed, multi-pin circular connectors. Available in two sizes with metal or thermoplastic housings, these connectors offer 19 contact configurations and accept contact sizes 4 through 20, for a variety of arrangements for signal and power from 7.5 Amps to 100 Amps.
of the heavy-duty equipment. The HD30 features include quick connect/disconnect bayonet coupling, single hole bulkhead mounting, silicone seals and a rear insertion/rear removal contact system. The HDP20 connectors are heavy-duty rated, environmentally sealed, composite shell, multi-pin connectors. The composite thermo-plastic shell is suited for applications where chemicals can damage a connector housing. HDP20 features quick connect-coupling, single hole bulkhead mounting, silicone seals and a rear insertion/rear removal contact system.
The DEUTSCH HD30 connectors are constructed from a metal shell developed to meet the needs
Application: Sealed Wire-to-Wire, In-line and Panel Mount Performance Specifications Sizes (Positions)
Wire Range
Temperature
Durability
Insulation Resistance
Immersion
Voltage DWV
6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35 and 47
13.0 - 0.35 mm2
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC
Material Specifications Series
Grommet
Insert Retainer
Pulse Coupling Ring
Shell
HD30
Silicon Rubber
Unfilled PEI
Aluminum
Aluminum
HDP20
Silicon Rubber
Unfilled PEI
Glass-filled PA
Glass-filled PA
Product Features • • • •
19 Contact Arrangements 2 Shell Sizes 18-Shell Size: 6, 8, 14, 20 and 21 Position 24-Shell Size: 7, 9, 14, 16, 18, 19, 21, 23, 29, 31, 33, 35 and 47 Position
• • • • •
Size 20, 16, 12, 8 and 4 Contacts In-line or Bulkhead Mounting Mounting Hardware and Dust Caps are Available Three Wire Seal Options (for Various Insulations) Strain-reliefs, Backshells and Conduit Adaptors are Available
13
DEUTSCH Sealed PCB Enclosures and Headers
Jiffy Splices
DEUTSCH PCB enclosures and headers are rugged, environmentally sealed solutions for printed circuit board applications. The enclosures feature through hole mounting flanges, as well as optional venting. Designed with space to accommodate one or more DEUTSCH DT or DTM connector interfaces, the headers feature 90° pins. A radial flange seal provides environmental sealing to the enclosure. The headers mate with standard DEUTSCH DT and DTM plugs.
TE Connectivity’s Jiffy Splice for DEUTSCH contacts is designed to withstand the harsh conditions of the construction, mining, marine and agricultural industries. It is easy to install and can be used to quickly repair damaged electrical connections on equip-
Application: Sealed Wire-to-PCB Performance Specifications
Performance Specifications Sizes (Positions)
Wire Range
Temperature
Immersion
Sizes
Wire Range
Current
12, 14, 36 and 48
14 - 20 AWG
-55°C to +125°C
IP68
Size 12
12 - 14 AWG
25 A
Size 16
14 - 20 AWG
13 A
Material Specifications
Temperature -55°C to +125°C
Material Specifications
Housing
CPA
Mating Pins
Thermoplastic
Gold over Ni
Tin-lead over NI-Soldering Pins
Silicone Elastomer
Product Features
Product Features
• • • • • •
• • • • •
Size 20 and 16 Contacts Tin, Nickel and Gold Plating Options Polarized Headers/Plugs Clear PEI Natural Option for Diagnostics Available with and without Venting Custom Header Plates Available
14
12-20 AWG (6.00 - 0.50mm2) One Cavity Arrangement, Available in Two Sizes In-line Cylindrical, Silicone Elastomeric Body Size 16 and 12 Contacts
TE Product Specs: 108-151041
Sizes (Positions)
Wire Range
Temperature
Durability
Insulation Resistance
Immersion
Voltage
Medical Equipment Robotics Food Processing Commercial White Goods Portable Power Equipment Solar Power Equipment Aftermarket Vehicle Mods Digital Billboards
TE Connectivity Industrial Connectors – Application Guide
AMPSEAL 16 Connectors
2, 3, 4, 6, 8 and 12
2.0 - 0.5 mm²
-40°C to +125°C
50 Cycles
20 Megohms
IP67
250 VDC
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
DEUTSCH AEC Connectors
40
2.0 - 0.5 mm2
-55°C to +125°C
100 1000 IP68 ment atMegohms the jobsite. Cycles
1500 VAC
◆ ◆
◆
Sealed Wire-to-Wire
DEUTSCH DRB Connectors
48, 60, 102 16.0 - 0.35 and 128 mm²
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC
◆ ◆
◆
DEUTSCH DRC Connectors
24, 40, 50, 60, 64 and 70
2.5 - 0.35 mm²
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC
◆ ◆
◆
DEUTSCH DT Connectors
2, 3, 4, 6, 8 and 12
6.0 - 0.35 mm²
-55°C to +150°C
100 Cycles
1000 Megohms
IP68
1500 VAC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
DEUTSCH DTHD Connectors
4, 8 and 12
6.0 - 0.35 mm²
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC
DEUTSCH HD10 Connectors
3, 4, 5, 6 and 9
13.0 to 0.50 mm²
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
6, 7, 8, 9, 14, 16, 18, 19, 13.0 - 0.35 20, 21, 23, mm² DEUTSCH HDP20 Connectors 29, 31, 33, 35 and 47
-55°C to +125°C
100 Cycles
1000 Megohms
IP68
1500 VAC
2, 3, 4, 6, 7, DEUTSCH HDSCS Connectors 8, 10, 12, 15, 16 and 18
6.0 - 0.2 mm²
-40°C to +140°C
10, 50 and 100 Cycles
500 VDC
IP67 IP69K with covers
Up to 60 VDC
Jiffy Splice
12 and 16
6.0 - 0.5 mm²
-55°C to +125°C
8, 14, 23, 35
1.31 - 0.52 mm²
-40°C to +125°C
10 Cycles
10 Megohms
IP67
250 VAC
26, 34 and 60
1.25 - 0.5 mm²
-40°C to +125°C
25 Cycles
100 Megohms
IP67
250 V AC/DC
12, 14, 36 and 48
2.0 - 0.5 mm²
-55°C to +125°C
15, 18, 21, 22, 26, 29, 31, 39, 46, 62, 92 and 120
6.0 - 0.2 mm²
-40°C to +140°C
20, 50 and 100 Cycles
500 VDC
IP69K
Up to 42 VDC
2, 3, 4, 5, 6 and 7
0.2 - 4.0 mm²
-40°C to +120°C
20 Cycles
1000 VDC
IPX7, IPX9k
1000 VAC
6 to 21, 25 and 36
0.75 - 4 mm²
-40°C to +120°C
10 and 50 Cycles
500 VDC
IP30
28 VDC
DEUTSCH HD30 Connectors
◆ ◆ ◆ ◆
◆ ◆
◆
◆ ◆ ◆ ◆ ◆ ◆
◆
◆ ◆ ◆ ◆ ◆ ◆
◆ ◆ ◆ ◆
Sealed Wire-to-Board AMPSEAL Connectors DEUTSCH Superseal 1.0 Connectors
◆ ◆ ◆
◆ ◆
◆ ◆ ◆ ◆
◆ ◆
Sealed Wire-to-PCB DEUTSCH Sealed PCB Enclosures and Headers
IP68
◆ ◆ ◆ ◆ ◆ ◆ ◆
Sealed Wire-to-Device
LEAVYSEAL Connectors
◆ ◆ ◆
Unsealed Wire-to-Board Circular DIN Connectors Unsealed AMP MCP Connectors
15
◆ ◆ ◆ ◆
◆ ◆
Why Buy from the Specialist in Electronic Component Distribution? Founded in 1971, TTI has steadily grown to become the world’s leading interconnect, passive, electromechanical and discrete component distributor in the industry. The company was founded on the premise that passive component purchasing could be made more efficient by offering product specialization, customer-driven service, and proprietary supply chain solutions.
Knowledgeable Product Experts
Broader and Deeper Inventories
AIM - Advanced Inventory Management Platform
Specialization allows TTI product managers to provide much better product insight to support your manufacturing from design through production. TTI Specialists’ commitment to our customers is key to our continued success.
TTI maintains extensive component inventories, stocking more than 500,000 part numbers in North America and over 850,000 globally – that’s more interconnect, passive, electromechanical and discrete inventory available than from any other source.
TTI’s proprietary supply chain system is specifically designed for managing IP&E products and partnerships with premier manufacturers. This allows us to provide the BOM coverage necessary to deploy comprehensive solutions that reduce total cost of ownership and mitigate line down risk.
Quality and Reliability TTI is the first distributor to have all global warehouse locations ISO registered and currently are certified to ISO 9001 with AS9100C and ISO 14001 in North America, ISO 9001, EN 9100, ISO 14001 and EN 9120 in TTI Europe and ISO 9001 in TTI Asia.
Year after year, customers rate our inventory availability, on-time delivery and accuracy among the very best in the industry – contact your local TTI Specialists via sales@de.ttiinc.com and discover why. TE Connectivity, TE connectivity (logo), TE, DEUTSCH, LEAVYSEAL, SUPERSEAL, and AMPSEAL are trademarks.
www.tuev.sued.de/ms-zert
sales@de.ttiinc.com • ttieurope.com
IECQ-P BSI 14.0013 | IECQ-P BSI 14.0013-02 | www.iecq.org