STARTEC XP-P+
METAL BONDED GRINDING TOOLS FOR FLUTE GRINDING
A Company of the SWAROVSKI Group www.tyrolit.com
PRODUCT INFO
STARTEC XP-P+ With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for flute grinding on cemented carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to a significant reduction in grinding forces or to a major increase in profile retention. The precision of the processed tools remains at the same familiar high level.
Increased traverse speed: DC diamond quality enables increases in traverse speed of up to 30 percent to be achieved.
Application Flute grinding of cemented carbide round tools
Extended dressing intervals: The use of diamond quality DP reduces grinding wheel wear by up to 20 percent and increases profile retention.
Simple profilability: The innovative metal bond means that the grinding wheel can be profiled in a very short time.
Example of application Workpiece: twist drill d = 8.5 mm K30F cemented carbide Machine: ANCA MX7 / coolant: oil Grinding wheel: DC54 MXPP+
25% increase in traverse speed and 15% reduction in contact time. STARTEC XP-P+
164 s 192 s
DC – for reduced grinding forces DP – for increased profile retention
Reduced power consumption approx. -50% (with flute 8) STARTEC XP-P+
371 N
COMPETITION
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. Swarovskistraße 33 | 6130 Schwaz | Austria | phone +43 5242 606-0 | fax +43 5242 63398
Diamond qualities
708 N
Both diamond qualities are available in grain sizes from 35 to 181 µm. 20047275-EN-0813
COMPETITION