1 minute read
Engine - Engine and crankcase
Engine - Install DANGER
Heavy objects!
Advertisement
Lift and handle all heavy components using lifting equipment with adequate capacity . Always support units parts with suitable slings hooks. Make sure the work area clear all bystanders. Failure comply will result death serious injury
Attach proper lifting straps the eye hooks (1) vided the front right and rear left the engine.
Using a suitable hoist carefully lower engine into engine compartment the skid steer .
Slowly orient the hydraulic pump coupler the adapter the engine ensuring the attachment engine plate flywheel
Apply L OCTITE ® 243 the threads the bolts (2) . tach engine hydraulic pump mounting plate using the twelve mounting bolts (2) T ighten the mounting bolts (2) a torque - N·m ( - )
Engine - Engine and crankcase
10.
Connect ground from the quick battery disconnect the engine (7) remote engine oil filter lines (8) .
13. Connect the fuel supply line .
14. Connect the wire harness (12) and clamps (13) the top the flywheel
Connect throttle cable installing the nut (A) and bolt (B) the throttle body Install cable support clamp (C) and tighten the two hex head bolts (D)
Connect oil pressure sender wire (14) and support (15)
