Safety rules

SR175 SV185

Personal safety

This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual you will find the signal words DANGER, W ARNING, and CAUTION followed special These precautions are intended for the personal safety you and those working with

Read and understand all the safety messages this manual before you operate service the machine.

DANGER indicates a hazardous situation that, not avoided, will result death serious injury .

W ARNING indicates a hazardous situation not could result death serious injury

CAUTION indicates a hazardous situation not could result minor moderate injury

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation not could result machine property

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property The word Notice used address practices not related personal safety

Information

NOTE: Note indicates additional information that clarifies other information this Throughout this manual you will find the word Note followed additional information about a other information the The word Note not intended address personal safety property

Safety rules - Personal safety

SR175 SV185

Carefully study these precautions, and those included the external attachment operators manual, and insist that they followed those working with and for you.

Thoroughly read and understand this manual and the attachment Operator ’ s Manual before operating this any other

Be sure all people and pets are clear the machine before starting. Sound the horn, equipped, three times before starting

Only the operator should the machine when operation. Never allow anyone climb the machine while the machine equipped with Instructors this must only used for training Passengers must not allowed use the Instructors

Keep all shields

Never work around the machine any the attachments while wearing loose clothing that might catch moving

Observe the following precautions whenever lubricating the machine making adjustments.

• Disengage all clutching levers

• Lower the the ground raise the attachment completely and engage the cylinder safety Completing these actions will prevent the attachment from lowering unexpectedly

• Engage the parking brake.

• Shut f the engine and remove the key

• W ait for all machine movement stop before leaving the operators platform.

Always keep the machine gear while travelling

The machine should always equipped with suf ficient front rear axle weight for safe operation.

Under some field more weight may required the front rear axle for adequate stability This especially important when operating hilly conditions / when using heavy

Always lower the shut f the set the parking engage the transmission remove the key and wait for all machine movement stop before leaving the operators the attachment machine should become obstructed plugged; set the parking shut f the engine and remove the key , engage the transmission wait for all machine attachment motion come a before leaving the operators platform removing the obstruction

1 Never disconnect make any adjustments the hydraulic system unless the machine and / the attachment lowered the ground the safety lock(s) the engaged

Use the flashing lights highly recommended when operating a public

When transporting a road highway , use accessory lights and devices for adequate warning the tors other vehicles. this regard, check local government regulations. V arious safety lights and devices are available from your CASE CONSTRUCTION dealer

14. Practice safety 365 days a year .

Keep all your equipment safe operating

Keep all guards and safety devices

Always set the parking shut f the engine and remove the key , engage the transmission wait for all machine attachment motion come a before leaving the operators platform service the machine and

Remember: A careful operator the best insurance against 19. Extreme care should taken keeping hands and clothing away from moving parts.

Safety rules - Ecology and the environment

SR175

SV185

Soil, air , and water are vital factors agriculture and life general. When legislation does not yet rule the treatment some the substances required advanced technology , sound judgment should govern the use and disposal products a chemical and petrochemical

NOTE: The following are recommendations that may assistance:

• Become acquainted with and ensure that you understand the relative legislation applicable your country

• Where legislation exists, obtain information from suppliers oils, filters, batteries, fuels, antifreeze, cleaning with regard their fect man and nature and how safely and dispose these

• Agricultural consultants many able help you

Helpful hints

• A void filling tanks using cans inappropriate pressurized fuel delivery systems that may cause considerable

• avoid skin contact with all

Most them contain substances that may harmful your

• Modern oils contain additives. not burn contaminated fuels and waste oils ordinary heating systems.

• A void spillage when draining f used engine coolant gearbox and hydraulic brake not mix drained brake fluids fuels with Store them safely until they can disposed a proper way comply with local legislation and available

• Modern coolant antifreeze and other should replaced every two They should not allowed get into the but should collected and disposed properly

• not open the air - conditioning system contains gases that should not released into the our CASE CONSTRUCTION dealer air conditioning specialist has a special extractor for this purpose and will have recharge the system properly

• Repair any leaks defects the engine cooling hydraulic system immediately

• not increase the pressure a pressurized circuit this may lead a component

• Protect hoses during welding penetrating weld splatter may burn a hole weaken allowing the loss

Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL.NOWAITING

NOTE:

If there is no response to click on the link above, please download the PDF document first and then clickonit.

T orque - Minimum tightening torques for normal assembly

Identifica Tion