Clutch - Clutch and components

13. Extract the pivot pins (1) the main clutch control

T o refit the proceed follows:

• Refit the lever pivot pins and the relative

• Refit the main clutch disk the clutch

• Install the main clutch pressure securing the pins with the bolts.

• Install the belleville spring carefully position the three clamps and evenly and progressively press the Insert the six making sure that they are securely inserted their respective seats, then remove the clamps.

• Install the P clutch disk; fit the three washers and the coil springs the pins and secure with the three

Clutch - Overhaul

Single disk clutch 1 (fitted with Power - Shuttle) test bench overhaul

Proceed follows:

Unscrew the three clutch lever adjustment nuts (1)

Remove the pressure plate (1) with the coil springs (2) the

Unscrew the six retaining bolts (1) the Power - Shuttle gear control disk and remove (2) .

T o refit the proceed follows:

• Refit the Power - Shuttle gear control disk the clutch

• Install the pressure plates and secure the spring

• T ighten the lever adjustment nuts. 47888360