HYDRAULIC - PNEUMA TIC - ELECTRICAL - ELECTRONIC SYSTEMS - PRIMAR Y HYDRAULIC POWER SYSTEM

Integral with the high pressure variable displacement pump the load sensing containing the pressure and flow compensating the steering pump , the charge pressure and main system filters and various electrical

Load sensing valve assembly (1), consists a flow compensating valve (2) and a high pressure control valve (3) . The load sensing valve receives hydraulic signals from operated components through the load sense line (4) and relays this the pump which will adjust satisfy the system

Steering

The steering pump a separate unit but still driven from the same drive gear the main

84276574A 10/05/2010

BSE3662A

T railer brake valve which located beneath the cab just front the hydraulic lift assembly The valve diverts oil pressure the trailer brakes whenever both tractor brake pedals are depressed.

BSE3599A

The hydraulic lift Electronic Draft Control V alve a stack type design mounted together with the Remote Control V alves (1) the rear below the and incorporates the safety valve for the lift cylinders

The lift cylinder safety valve protects the lift cylinder from shock loadings and limits the pressure the cylinder 210 - 215 bar

The hydraulic lift control valve a proportional solenoid operated controlled a microprocessor , raise and lower the hydraulic

BSE3604A

Closed centre load sensing remote control valves

There are two types remote valves available for the closed centre Standard fitment are the mechanical remote valves operated via a cable from within the cab and optional all x models are electro hydraulically operated (1) , Figure , which are operated electrical switches and have their own - built processor control oil flow via a solenoid four mechanical type valves can

Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL.NOWAITING

NOTE:

If there is no response to click on the link above, please download the PDF document first and then clickonit.

BSE3604B

Hydraulic Lift

Models with mechanical draft control utilize a main lift cylinder which located internally within the rear axle top cover and also one two external cylinders depending specification , Figure

BSE3844A

Models with electronic draft control utilize two external one per lift anchored the rear axle with a Figure

BSE3666A

Suspended front axle control valve.

Located the right hand side the tractor and attached the rear axle centre Receives high pressure via the trailer brake and with the use processor controlled PWM valves controls oil a cylinder , attached between the front axle and front provide a hydraulically controlled suspended front

84276574A 10/05/2010

BSE3668A

Front

BAIL07APH357HSA

Hydraulic

BSE3769A

BSE3021A

84276574A 10/05/2010