- PNEUMA TIC - ELECTRICAL - ELECTRONIC SYSTEMS - PRIMAR Y HYDRAULIC POWER SYSTEM

BAIS06CCM055A V A

T valves are located within the filter assembly These are (1) the 0.8 bar ( 1 1.600 psi ) supplementary lube valve and the 3 bar ( 43.500 psi ) charge pressure bypass valve (2) .

High Pressure Hydraulic V ariable Displacement Pump (CCLS) - Electrical Switches

Low Charge Pressure W arning Switch

Intake Filter restriction (vacuum) Switch

Low Oil T emperature Switch

Mid - Mount Remote V

Optional additional remote valves are mounted under the cab. Connected into the high pressure oil line supplied from the hydraulic pump after the trailer brake valve and operated via a joystick control the (Refer Mid - mount remote control valve - Static description (A.10.C) )

BAIL06CCM088ASA

Suspended front axle control valve (where fitted)

The suspension control valve located the right hand side the tractor High pressure oil fed from the power beyond port the sub plate the remote valve stack and with the use processor controlled PWM valves controls the flow oil the suspension cylinder (Refer SUSPENSION Hydraulic - Static description (D.40.C) )

Front Axle Suspension Cylinder

Steering Motor

There are two types steering motors fitted depending whether the tractor with less Supersteer The with Supersteer models are a Dynamic load sensing type with a variable depending the speed the steering wheel rotated. The less Supersteer models use a fixed displacement motor . Also fitted option some models a Fast Steer valve (1) which coupled the steering motor (2)

87727160B 13/04/2010