Link Product / Engine

Continuously V ariable T ransmission (CVT)

Continuously V ariable T ransmission (CVT) external controls

Continuously V ariable T ransmission (CVT) lubrication system

Continuously V ariable T ransmission (CVT) internal components

Hydraulic pump drive

Four-Wheel Drive (4WD) system

Drive shaft

Front axle system

Powered front axle

Front bevel gear set and dif ferential Final drive steering and shafts bevel gear set and dif ferential brake parking lock Hydraulic service brakes T railer brake hydraulic control T brake pneumatic control

V ariable displacement pump

14] hitch control valve hitch hydraulic adjustment Remote control valves Reservoir , cooler , and filters Combination pump units and implement couplings

Foreword - Important notice regarding equipment servicing

All repair and maintenance work listed this manual must carried out only qualified dealership strictly complying with the instructions and whenever the special

Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall responsible for any subsequent

The manufacturer and all the organizations its distribution chain, including - without limitationnational, regional, local reject any responsibility for damages caused parts and / components not approved the facturer , including those used for the servicing repair the product manufactured marketed the manufacturer any case, warranty given attributed the product manufactured marketed the manufacturer case damages caused parts and / components not approved the manufacturer case refer your NEW HOLLAND Sales and Service

The information this manual - - date the date the the policy the manufacturer for continuous Some information could not updated due modifications a technical commercial type, changes the laws and regulations dif ferent countries.

Introduction

Safety rules

Personal safety

This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual you will find the signal words W and CAUTION followed special These precautions are intended for the personal safety you and those working with

Read and understand all the safety messages this manual before you operate service the

DANGER indicates a hazardous situation not will result death serious injury

W

ARNING indicates a hazardous situation not could result death serious injury

CAUTION indicates a hazardous situation not could result minor moderate injury

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation that, not avoided, could result machine property damage.

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property damage. The word Notice used address practices not related personal safety .

Information

NOTE: Note indicates additional information that clarifies other information this

Throughout this manual you will find the word Note followed additional information about a step, other information the The word Note not intended address personal safety property

Engine - Engine and crankcase

Engine - Remove

Prior operation: Disconnect the batteries Battery - Disconnect (55.302)

Prior operation: Remove the hood Hood - Remove

Prior operation:

Side shield - Remove

Prior operation: Recover the refrigerant Air conditioning - Recover (50.200)

Prior operation:

Drain the coolant Engine cooling system - Emptying (10.400)

Prior operation:

Engine cooling system - Remove (10.400)

Prior operation:

Diesel Oxidation Catalyst (DOC) - Remove

NOTE: Clean all fittings before

NOTE: Cap plug all lines and ports when disconnecting hydraulic components.

Disconnect the harness connector the humidity sor (1) and the air restriction sensor (2) Disengage the hose clamp (3) and disconnect the hose from the air take

Disconnect the clamps (1) from each end the air intake tube and remove the

Cut the wire tie (1) securing the harness the hood support (2)

Disconnect the starter cables (1) and the auxiliary wire (2)

Remove the three bolts (1) securing the hood support the

Remove the hood

Engine - Engine and crankcase

Disconnect the high pressure A / C hose (1) and the coolant lines (2) Plug cap all ports and

Remove the two bolts (1) from the rear engine mount

Remove the engine mount cover

Disconnect the suspended axle electrical connectors (1)