1 minute read
Engine - Engine and crankcase
50. Disconnect the cab heater supply (1) and return (2)
Loosen the clamp and disconnect the coolant fill hose (3) (from the deaeration tank). Remove the bracket attaching bolts (4)
Advertisement
RCPH10CCH072BAB
Remove the bolts (1) securing the rear hose / tube bracket (2) Place the hose / tube assembly along side the tractor RCPH10CCH915AAB
53. Disconnect the connectors (1) between the engine and transmission RCPH10CCH916AAB
At the disconnect the A / C high (1) and low sure (2) tube RCPH10CCH920AAB
55. Loosen the clamp (1) . Remove the exhaust pipe (2) and set
RCPH10CCH917AAB
At the starter , remove the nut and disconnect the battery ground cable (1)
Repeat for the battery positive (2) and alternator put (3)
Remove the bolt and disengage the engine ground cable (4)
RCPH10CCH919AAB
Remove the plug (1) and screw (2) and remove the starter solenoid (3) Reinstall the screw
RCPH10CCH818AAB
At the left front cab remove the bolt and connect the ground connector (1) .
RCPH10CCH921AAB
