![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/31bf5883ea7ee83a3821d34ccc043023.jpeg?width=720&quality=85%2C50)
1 minute read
Engine - Engine and crankcase
![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/117c63ec7adf5b45dba2e58b93babbc3.jpeg?width=720&quality=85%2C50)
Engine - Change fluid - Changing engine oil and filter
Advertisement
NOTE: Reduce 300 hours less NEW HOLLAND AMBRA UNITEK MASTERGOLD SBL - 4 not Change the engine oil and filter every 600 hours once a year before whichever occurs Y our dealer has approved oil and filters. not use other types oil
NOTE: For best results change the oil and filter while the engine still warm the touch from operation (not hot). The tractor must a level Remove the engine side shields. engine
Remove the oil pan drain plug and drain the oil from the engine into a container
After all oil has install new washer 98474302 drain center washer plug and install drain T orque drain plug N·m ( )
Clean the area around the filter head and housing the left side the Place a container under the oil filter and turn the filter housing counterclockwise loosen with a ( 2 ) After all oil has drained from the filter , remove the housing with filter
Install the new filter cartridge and O - Lightly oil new Oring.
Reinstall the filter assembly onto the tractor . not over tighten O - ring will
Fill with new oil into the engine oil fill (1) .
NOTE: T otal oil refill capacity will determined how completely the crankcase not fill above the high mark the dipstick (2) when refilling.
Operate the engine for five minutes 1000 RPM . Check for oil leaks the filter base and drain
Stop the W ait approximately five minutes for the oil return the oil pan. Check the oil level the dipstick (2) and add oil
![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/128319530d00f55c38838a97c30e5fa2.jpeg?width=720&quality=85%2C50)
13L engines
![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/e6108c563becc9cce7f531c6806705e8.jpeg?width=720&quality=85%2C50)
Remove the oil pan drain plug and drain the oil from the engine into a container
After all oil has install new washer 98474302 drain plug, center washer plug and install drain T orque drain plug N·m ( )
Place a container under the oil filter the left side the Use a ( 0.75 ) socket open drain bottom This will allow oil drain from the After oil turn the filter housing counterclockwise loosen with a ( 2 ) wrench and remove the filter
![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/31bf5883ea7ee83a3821d34ccc043023.jpeg?width=720&quality=85%2C50)
Install the new filter cartridge and O -
Reinstall the filter assembly not over tighten the O - ring will leak.
Fill with new oil into the engine oil fill (1) .
NOTE: T otal oil refill capacity will determined how completely the crankcase not fill above the high mark the dipstick (2) when refilling.
Operate the engine for five minutes 1000 RPM . Check for oil leaks the filter base and drain
Stop the W ait approximately five minutes for the oil return the oil pan. Check the oil level the dipstick (2) and add oil
![](https://assets.isu.pub/document-structure/230510205020-6475286464da5c81ca12d2cdcca23bfc/v1/892e0c6197bf2e3ea5d2d6c4245d39ef.jpeg?width=720&quality=85%2C50)