Link Product / Engine

null Europe heavy duty wheeled model [ZEF400001 - ] null Europe heavy duty wheeled model [ZEF400001 - ] null Europe heavy duty wheeled model [ZEF400001 - ] null Europe wheeled scraper model [ZEF400001 - ] null Europe heavy duty wheeled model [ZEF400001 - ] null Europe heavy duty wheeled model [ZEF400001 - ] null Europe wheeled scraper model [ZEF400001 - ] null Europe wheeled model [ZEF400001 - ] null Europe wheeled scraper model [ZEF400001 - ] null Europe heavy duty wheeled model [ZEF400001 - ]

Engine cooling system

Fan and drive Selective Catalytic Reduction (SCR) exhaust treatment

13] Powershift transmission

Powershift transmission external controls

Gearbox internal components Powershift transmission internal components

Hydraulic systems

Pump control valves

Charge pump V ariable displacement pump

Remote control valves hydraulic pump and lines

Reservoir , cooler , and filters

Combination pump units

High flow hydraulics and implement couplings

Drawbars and towing hitches

Rear

Selective

Foreword - Important notice regarding equipment servicing

All repair and maintenance work listed this manual must carried out only qualified dealership strictly complying with the instructions and whenever the special

Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall responsible for any subsequent

The manufacturer and all the organizations its distribution chain, including - without limitationnational, regional, local reject any responsibility for damages caused parts and / components not approved the facturer , including those used for the servicing repair the product manufactured marketed the manufacturer any case, warranty given attributed the product manufactured marketed the manufacturer case damages caused parts and / components not approved the manufacturer case refer your NEW HOLLAND Sales and Service

The information this manual - - date the date the the policy the manufacturer for continuous Some information could not updated due modifications a technical commercial type, changes the laws and regulations dif ferent countries.

Introduction

Safety rules

Personal safety

This the safety alert used alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury

Throughout this manual you will find the signal words W and CAUTION followed special These precautions are intended for the personal safety you and those working with

Read and understand all the safety messages this manual before you operate service the

DANGER indicates a hazardous situation not will result death serious injury

W

ARNING indicates a hazardous situation not could result death serious injury

CAUTION indicates a hazardous situation not could result minor moderate injury

F AILURE T O FOLLOW DANGER, W ARNING, AND CAUTION MESSAGES COULD RESUL T DEA SERIOUS INJUR Y .

Machine safety

NOTICE: Notice indicates a situation that, not avoided, could result machine property damage.

Throughout this manual you will find the signal word Notice followed special instructions prevent machine property damage. The word Notice used address practices not related personal safety .

Information

NOTE: Note indicates additional information that clarifies other information this

Throughout this manual you will find the word Note followed additional information about a step, other information the The word Note not intended address personal safety property

Safety rules - Personal safety

General safety rules

Use caution when operating the machine Raised full tanks and other loads will change the center gravity the The machine can tip roll over when near ditches and embankments uneven

Never permit anyone other than the operator ride the

Never operate the machine under the influence while otherwise

While driving the the seat swivel position must always straight forward and locked position with The seat swivel should only rotated for field

Stay f slopes too steep for safe Shift down before you start down a hill with a heavy A void wheeling.” not drive high speed with the dif ferential lock Dif ficult steering will occur , and can result field use the dif ferential lock for traction but release for turning row ends. not exceed implement transport speed the speed rating the implement Review the implements Operator ’ s Manual for specifications. Failure comply could result death serious injury .

For speeds / h ( mph ) , make sure that the weight a trailed vehicle that not equipped with brakes does NOT EXCEED times the T ractor For speeds / h ( mph ) , make sure that the weight the trailed vehicle that not equipped with does NOT EXCEED the weight the T ractor Stopping distance increases with increasing speed the weight the towed load especially hills and

Rear upset can result pulling from wrong location tractor Hitch only the drawbar Use three point hitch only with the implements designed for its use – not a drawbar not look directly into the front rear HID (high intensity discharge) Eye damage can occur not tamper with the ballast the front rear high intensity discharge (HID) lamp since uses high Personal injury death can occur .

T o avoid possible eye damage from microwave signals emitted the radar sensor , not look directly into the sensor face.

When digging using ground engaging attachments aware buried Contact local utilities determine the locations services.

Pay attention overhead power lines and hanging High voltage lines may require significant clearance for safety .

Hydraulic oil diesel fuel leaking under pressure can penetrate the causing serious injury

• NOT use your hand check for leaks. Use a piece cardboard paper .

• Stop remove key and relieve the pressure before connecting disconnecting fluid

• Make sure all components are good condition and tighten all connections before starting the engine izing the

• hydraulic fluid diesel fuel penetrates the seek medical attention immediately

• Continuous long term contact with hydraulic fluid may cause skin cancer A void long term contact and wash the skin promptly with soap and water

Keep clear moving Loose jewelry , long hair , and other loose hanging items can become entangled moving

W ear protective equipment when

NOT attempt remove material from any part the machine while being operated components are

Make sure all guards and shields are good condition and properly installed before operating the Never operate the machine with shields Always close access doors panels before operating the

Dirty slippery and platforms can cause Make sure these surfaces remain clean and clear

A person pet within the operating area a machine can struck crushed the machine its NOT allow anyone enter the work

Raised equipment and / loads can fall unexpectedly and crush persons Never allow anyone enter the area underneath raised equipment during

Never operate engine enclosed spaces harmful exhaust gases may build

Before starting the sure that all controls are neutral park lock

Start the engine only from the operator ’ s the safety start switch the engine can start with the transmission gear not connect short across terminals the starter Attach jumper cables described the manual. Starting gear may cause death serious injury .

Always keep and all lighting clean provide the best possible visibility while operating the Operate controls only when seated the operator ’ s seat, except for those controls expressly intended for use from other

Before leaving the machine: Park machine a firm level

Put all controls neutral park lock position.

Engage park Use wheel chocks

Lower all hydraulic equipment Implements, header , etc.

T urn f engine and remove key

When, due exceptional circumstances, you would decide keep the engine running after leaving the operator ’ s then the following precautions must followed:

Bring the engine low idle

Disengage all drive

W Arning

Some components may continue run down after disengaging drive systems. Make sure all drive systems are fully disengaged. Failure comply could result death serious injury

Shift the transmission into neutral. Apply the parking