Technical specifications: CDE62TR 08MJ (6x2 Rigid Truck with GH8E 250 Engine) CAB
ENGINE Make & model:
UD GH8E 250
Type:
Type:
6 cylinder inline, overhead camshaft, common rail injection system, water cooled, turbocharged with intercooler
Forward control, all steel welded construction, tilting cab with suspension and hydraulic shock absorbers
Cab features:
Emission norm:
Euro III
Aerodynamic design; sleeper cab with sleeping bunk and under bunk storage; steel bumper; dirt deflectors; manual cab tilting
Bore x stroke:
110 mm x 135 mm
Cab colours:
Total piston displacement:
7,698 cc
Crimson Red (Calm White, Primary Yellow and Forest Green available as option)
Max output:
250 hp (184 kW) @ 2,200 rpm
Max torque:
950 Nm @ 1,100 - 1,700 rpm
Compression ratio:
17.5:1
Lubrication system:
Forced feed lubrication system with filters
Air cleaner:
Double stage paper element
OTHER STANDARD FITMENTS Air conditioning system Liftable tag axle Fuel coaching system Electric window lift PERFORMANCE* GVW Rating:
31 tonnes
Type:
CS42-O; pull type with dry single plate, air assisted
Max. speed:
85 kmph
Plate diameter:
420 mm
Gradeability:
37% on crawler gear
CLUTCH
Radiator screen Basic tool kit 20 ton jack Warning triangles x 2
*Based on theoretical calculations. Actual performance depends on various parameters like actual load, road dulation and conditions, driver, condition of vehicles, etc.
GEARBOX Make & model:
UD ST1199
Type:
9 speed synchromesh (except crawler and reverse); max engine torque 1,190 Nm
Front axle: 4,300
Rear axle: 3,800
Gear ratios:
1st - 12.11; 2nd - 8.08; 3rd - 5.96; 4th - 4.42; 5th - 3.36; 6th - 2.41; 7th - 1.77; 8th - 1.32; 9th - 1.00; Reverse - 12.66
Max. on front: 8,000
Max. on rear: 23,000
Gear shift:
Mechanical wire operated
*Weights mentioned are estimated and indicative only, actual may vary on selection of optional items.
PTO:
Gearbox mounted PTO available as an option
WEIGHTS (Chassis with cab - kgs)* Total: 8,100
Permissible gross combination weight: 31,000
FINAL DRIVE Type:
UD RSS1348; UD single reduction hypoid gear type
Final ratio:
5.57
Front axle type:
Drop forged steel "I" section
Rear axle type:
Full floating, pressed steel banjo housing type
Chassis frame type:
Thermo mechanically rolled, ladder type
Chassis frame dimension:
300 mm x 90 mm x 8 mm
1137
CHASSIS
Chassis frame reinforcement: 5 mm thick from transmission cross member to end of bogie, dimensions: 277 mm x 80 mm x 5 mm Steering:
Recirculating ball screw type with hydraulic power assistance, adjustable tilt/telescopic
SUSPENSION Front:
Parabolic leaf springs with anchor at front and shackle at rear, telescopic type shock absorber with front stabilizer
Capacity:
8,000 kgs
Rear:
Lubrication free leaf spring suspended bogie; Rubber journalled V-stays and reaction rods; no. of leaves - 8; Rear spring width- 75mm; Liftable tag axle (without lift available as option) 23,000 kgs
Capacity: BRAKES Service brakes:
Full air, drum, S-cam type brakes with automatic slack adjuster Front: Internal expanding leading and trailing type shoes Rear: Internal expanding leading and trailing type shoes
Parking brakes:
Pneumatically controlled spring brakes operated by hand control lever, acting on front and first rear axles
Auxiliary brake:
Exhaust Pressure Governor (EPG) type
DIMENSIONS (mm) Wheelbase (WB)
4,600
Front Overhang (FOH)
1,480
Overall Length (OL)
8,875
Rear Overhang (ROH)
1,425
Overall Width (OW)
2,500
Ground Clearance
245
Minimum Turning Circle Radius 8.3m (kerb to kerb) Other Wheelbase Options (mm): 3,900; 4,300; 5,100 Other ROH Options (mm): From 1,125 to 2,325 at intervals of 100mm
WHEELS AND TYRES Disc type:
Pressed steel disc type with ISO 10 studs
Wheel size:
8.0 x 20
Tyre size:
11.00 R 20 16 PR
Spare wheel:
1 spare wheel equal to front with lockable spare wheel carrier
FUEL TANK Fuel tank capacity:
315 litre steel tank mounted on RHS of vehicle lockable cap
ELECTRICAL EQUIPMENT Battery capacity:
150 Ah; 2 x 12v types
Alternator:
24 volts, 90 amperes
Headlamps & foglamps
Halogen headlights Auxiliary white colour foglamps as option
Article Number #201410SRI_62R8GCA-01-10 Printed in Sri Lanka. Š Copyright UD Trucks 2014. All rights reserved. Please note that equipment shown may be optional and may vary from one country to another. We retain the right to alter product specification without prior notification.