Quester CWE HDE11 Petroleum specification sheet

Page 1

Technical specifications: CWE64R 11MS (6x4 Rigid Truck with GH11E 370 Engine) ENGINE

CAB

Make & model:

UD GH11E 370

Type:

Type:

6 cylinder inline, overhead camshaft, unit injector type controlled by Engine Management System (EMS), water cooled, turbocharged with intercooler

Forward control, all steel welded construction, tilting cab with suspension and hydraulic shock absorbers

Cab features:

Emission norm:

Euro III

Aerodynamic design; sleeper cab with sleeping bunk and under bunk storage; composite material bumper with FUP; dirt deflectors; manual cab tilting

Bore x stroke:

123 mm x 152 mm

Cab colours:

Calm White (Crimson Red, Primary Yellow and Forest Green available as option)

Total piston displacement:

10,837 cc

Max output:

370 hp (273 kW) @ 1,900 rpm

Max torque:

1,700 Nm @ 1,000 - 1,400 rpm

Compression ratio:

18.3:1

Lubrication system:

Forced feed lubrication system with filters

Air cleaner:

Double stage paper element

CLUTCH

OTHER STANDARD FITMENTS ADR Air conditioning system Fuel coaching system Electrical window lift PERFORMANCE* GVW Rating:

34 tonnes

Type:

CS42-O; pull type with dry single plate, air assisted

Max. speed:

109 kmph

Plate diameter:

420 mm

Gradeability:

45%

GEARBOX Make & model:

UD STO2009

Type:

9 speed synchromesh (except crawler and reverse); max engine torque 2,000 Nm

Gear ratios:

1st - 13.96; 2nd - 7.47; 3rd - 5.28; 4th - 3.82; 5th - 2.79; 6th - 1.95; 7th - 1.38; 8th - 1.00; 9th - 0.73; Reverse - 13.96

Gear shift:

Mechanical wire operated

PTO:

Gearbox mounted PTO available as an option

Radiator screen Basic tool kit 20 ton jack Warning triangles (x2)

*Based on theoretical calculations. Actual performance depends on various parameters like actual load, road dulation and conditions, driver, condition of vehicles, etc.

WEIGHTS (Chassis with cab - kgs)* Front axle: 4,600

Rear axle: 4,100

Max. on front: 8,000

Max. on rear: 26,000

Total: 8,700

Permissible gross vehicle weight: 34,000 *Weights mentioned are estimated and indicative only, actual may vary on selection of optional items.

FINAL DRIVE Type:

UD RTS2670; UD tandem single reduction axle, hypoid bevel gear type with differential lock between axles (interaxle)

Final ratio:

5.14 (4.63, 5.57 and 6.17 available as option)

Front axle type:

Drop forged steel "I" section

Rear axle type:

Full floating, pressed steel banjo housing type

Chassis frame type:

Thermo mechanically rolled, ladder type

Chassis frame dimension:

300 mm x 90 mm x 8 mm

1148

CHASSIS

3195

Chassis frame reinforcement: 5 mm thick from end of engine to end of frame, dimensions: 277 mm x 80 mm x 5 mm Steering:

Recirculating ball screw type with hydraulic power assistance, adjustable tilt/telescopic

SUSPENSION Front:

Parabolic leaf springs with anchor at front and shackle at rear, telescopic type shock absorber; front stabilizer

Capacity:

8,000 kgs

Rear:

Lubrication free Leaf spring suspended bogie for tandem drive axle; Rubber journalled V-stays and reaction rods; no. of leaves - 11; rear spring width - 75 mm

DIMENSIONS (mm)

Capacity:

26,000 kgs

Wheelbase (WB)

4,900

Front Overhang (FOH)

1,460

Overall Length (OL)

9,555

Rear Overhang (ROH)

1,825

BRAKES

Overall Width (OW)

2,500

Ground Clearance

275

Service brakes:

Full air, drum, S-cam type brakes with automatic slack adjuster, antilock braking system (ABS) as standard

Minimum Turning Circle Radius 9.6 m (kerb to kerb)

Front: Internal expanding leading and trailing type shoes

OTHER ROH OPTIONS: From 1,125 to 2,325 at intervals of 100 mm

OTHER WHEELBASE OPTIONS (mm): 3,900; 4,300; 4,600; 5,200 and 5,600

Rear: Internal expanding leading and trailing type shoes Parking brakes:

Pneumatically controlled spring brakes operated by hand control lever, acting on front and first rear axles

Auxiliary brake:

UD EEB (UD Extra Engine Brake) - combination of Exhaust Pressure Governor (EPG) and compression brake

WHEELS AND TYRES Disc type:

Pressed steel disc type with ISO 10 studs

Wheel size:

8.5 x 20

Tyre size:

12.00 R 20 16 PR

Spare wheel:

1 spare wheel equal to front with lockable spare wheel carrier

FUEL TANK Fuel tank capacity:

315 litre steel tank mounted on RHS of vehicle - lockable cap

ELECTRICAL EQUIPMENT Battery capacity:

150 Ah; 2 x 12v types

Alternator:

24 volts, 90 amperes

Headlamps & foglamps

Halogen headlights, auxiliary white colour foglamps as standard

Article Number #201410SRI_64R11PA-01-10 Printed in Sri Lanka. Š Copyright UD Trucks 2014. All rights reserved. Please note that equipment shown may be optional and may vary from one country to another. We retain the right to alter product specification without prior notification.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.