Quester CWE MDE8 Cargo Petroleum specification sheet

Page 1

Technical specifications: CWE64R 08MS (6x4 Rigid Truck with GH8E 280 Engine) CAB

ENGINE Make & model:

UD GH8E 280

Type:

Type:

6 Cylinder inline engine, overhead camshaft, common rail injection system, water cooled, turbocharged with intercooler

Forward control, all steel welded construction, tilting cab with suspension and hydraulic shock absorbers

Cab features:

Aerodynamic design; sleeper cab with sleeping bunk and under bunk storage; composite material bumper with front underrun protection system and dirt reflectors; manual cab tilting

Cab colours:

Crimson Red (Calm White, Primary Yellow and Forest Green available as option)

Emission norm:

Euro III

Bore x stroke:

110 mm x 135 mm

Total piston displacement:

7,698 cc

Max output:

280 Hp (206 kW) @ 2,200 rpm

Max torque:

1,050 Nm @ 1,000 - 1,700 rpm

Compression ratio:

17.5:1

Lubrication system:

Forced feed lubrication system with filters

Air cleaner:

Double stage paper element

CLUTCH Type:

CS42-O; pull type with dry single plate, air assisted

Plate diameter:

420 mm

GEARBOX Make & model:

UD ST1199

Type:

9 speed synchromesh (except crawler and reverse); max engine torque 1,190 Nm

Gear ratios:

1st - 12.11; 2nd - 8.08; 3rd - 5.96; 4th - 4.42; 5th - 3.36; 6th - 2.41; 7th - 1.77; 8th - 1.32; 9th - 1.00; Reverse - 12.66

Gear shift:

Mechanical wire operated

PTO:

Gearbox mounted PTO available as an option

OTHER STANDARD FITMENTS ADR (optional) Air conditioning system Fuel coaching system Electrical window lift

Radiator screen Basic tool kit 20 ton jack Warning triangles x 2

PERFORMANCE* GCW Rating:

34 tonnes

Max. speed:

96 kmph

Gradeability:

31% on crawler gear

*Based on theoretical calculations. Actual performance depends on various parameters like actual load, road dulation and conditions, driver, condition of vehicles, etc.

WEIGHTS (Chassis with cab - kgs)* Front axle: 4,450

Rear axle: 4,100

Max. on front: 8,000

Max. on rear: 26,000

Total: 8,550

Permissible gross combination weight: 34,000 *Weights mentioned are estimated and indicative only, actual may vary on selection of optional items.

FINAL DRIVE Type:

UD RTS2670; Tandem Single Reduction axle hypoid bevel gear type with differential lock between axles (interaxle)

Final ratio:

4.63 (5.14, 5.57 and 6.17 available as option)

Front axle type:

Drop forged steel "I" section

Rear axle type:

Full floating, pressed steel banjo housing type

Chassis frame type:

Thermo mechanically rolled, ladder type

Chassis frame dimension:

300 mm x 90 mm x 8 mm

1148

CHASSIS

3195 9555

Chassis frame reinforcement: 5 mm thick from transmission cross member to end of bogie, dimensions: 277 mm x 80 mm x 5 mm Steering:

Recirculating ball screw type with hydraulic power assistance, adjustable tilt/telescopic

SUSPENSION Front:

Parabolic leaf springs with anchor at front and shackle at rear, telescopic type shock absorber; front stabilizer

Capacity:

8,000 kgs

Rear:

Lubrication free Leaf spring suspended bogie for tandem drive axle; Rubber journalled V-stays and reaction rods; no. of leaves - 11; rear spring width - 75 mm

DIMENSIONS (mm)

Capacity:

26,000 kgs

Wheelbase (WB)

4,900

Front Overhang (FOH)

1,460

Overall Length (OL)

9,555

Rear Overhang (ROH)

1,825

Full air, drum, S-cam type brakes with automatic slack adjuster, antilock braking system (ABS) as standard

Overall Width (OW)

2,500

Ground Clearance

275

Front: Internal expanding leading and trailing type shoes

OTHER WHEELBASE OPTIONS (mm): 3,900; 4,300; 4,600; 5,200 and 5,600

Rear: Internal expanding leading and trailing type shoes

OTHER ROH OPTIONS (mm): From 1,125 to 2,325 at intervals of 100 mm

BRAKES Service brakes:

Parking brakes:

Pneumatically controlled spring brakes operated by hand control lever, acting on front and first rear axles

Auxiliary brake:

Exhaust Pressure Governor (EPG) type

Minimum Turning Circle Radius 9.55 m (kerb to kerb)

WHEELS AND TYRES Disc type:

Pressed steel disc type with ISO 10 studs

Wheel size:

8.0 x 20

Tyre size:

11.00 R 20 16 PR

Spare wheel:

1 spare wheel equal to front with lockable spare wheel carrier

FUEL TANK Fuel tank capacity:

315 litre steel tank mounted on RHS of vehicle - lockable cap

ELECTRICAL EQUIPMENT Battery capacity:

150 Ah; 2 x 12v types

Alternator:

24 volts, 90 amperes

Headlamps & foglamps

Halogen headlights, auxiliary white colour foglamps as standard

Article Number #201410SRI_64T11GCPA-01-10 Printed in Sri Lanka. Š Copyright UD Trucks 2014. All rights reserved. Please note that equipment shown may be optional and may vary from one country to another. We retain the right to alter product specification without prior notification.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.