Novelle by Aisling Product Guide & Order Forms

CONTENTS

product information

Important Information 02

Product Lead Times and Specials Availability 02

Order Acknowledgments, Changes & Cancellations 02

Painted & Lacquered Ranges 03

MFC Options 04

Colour Matching Service 04

General Range Information 05

Kitchen Door Care & Maintenance 05 Door Combinations 06

Standard Doors & Georgian Frames 07

Plain and Feature Frames 08

Carved Frames 08

Kitchen Matrix 09 Accessories 13

Hinges & Catches 36

Terms & Conditions 37

order forms

Mandatory Order Form 28

Door Order Form 29

Accessories Order Form 30

Dovetail Drawer Box Order Form 31

Special Requests Order Form 32

Canopy & Overmantle Order Form 33

Door Sample Order Form 34

PLACING ORDERS

Andoras Ltd encourages all customers to use the order forms contained within this product guide when ordering product. These order forms are designed to make the process easier for you and the processing of the order easier for our staff. When placing orders for special products it is imperative that you attach a detailed specification or drawing.

Andoras Ltd will always try to maintain their lead times, however, capacity will ultimately determine the time taken to dispatch orders. In times of increased capacity those customers who have used the Novelle order form will take priority over those who have not. Order forms are there to be used to increase efficiency in production planning.

Please note: credit-stopped orders will affect acknowledged delivery dates.

DELIVERY ARRANGEMENTS

Goods are despatched to the UK mainland Monday to Friday. Please contact Customer Services for further information. Delivery schedules may alter during holiday periods and customers will be notified in advance.

All consolidated orders below the value of £450/€500 will incur a carriage charge which will be estimated on the order acknowledgement.

Andoras Ltd strongly recommends using their standard delivery service for all goods.

All goods must be inspected thoroughly upon delivery. Andoras Ltd will not be liable for damages which haven’t been notified in

writing within 3 working days of receipt. Please note, any goods signed for as ‘Received in good condition’, and later found to be damaged, will not be accepted for return by Andoras Ltd.

Paint can normally only be shipped as part of a palletised order. Alternatively, it can be despatched individually using a special delivery service at a carriage cost of £30/€35 Andoras Ltd will not be held responsible for delivery of damaged goods by an external delivery company.

EXPRESS DELIVERY SERVICE

You can choose to use an uninsured express delivery service which allows a parcel/bundle to be delivered the next day (approx 3 doors per parcel), but we recommend using this service only when there is absolutely no alternative available. Each parcel costs £30/€35 carriage. Next day ‘am’ and Saturday deliveries are available at an additional cost.

ACCOUNT TERMS

After an initial 3 month pro-forma trading period, credit accounts may be considered for regular buying customers after receipt of a completed application form and when references have been validated. We will issue a letter stating the limits and terms granted as quickly as possible.

It should be noted that the date of invoice is the effective date for calculating credit facilities.

product lead times and specials availability

LEAD TIMES

Lead times are approximately 10 weeks for standard painted products. Off standard products and additional fittings such as hinges may incur an extra week. These lead times may vary at times according to capacity demand but we will advise accordingly.

Andoras Ltd operates a ‘fast track’ production facility to make one-off add-on/replacement doors. Despatch from Andoras Ltd is generally 10 working days from receipt for sanded finish only, or 15 working days for finished product. These lead times may vary at times according to capacity demand but we will advise accordingly. Please allow up to 2 working days for delivery.

Acknowledged delivery dates are based on our best estimate and Andoras Ltd will not be held liable for any losses (financial or otherwise) if product is not delivered on the exact date specified by the acknowledgement.

SPECIAL SIZES

Bespoke sizes are priced based on the next size up in the price list. For example: A Charlotte White Oak 770 x 487 special sized door will be based on the price of a 770 x 500 door. Items that do not fall into this category will be priced upon request.

HOW TO ORDER

1 No orders will be accepted verbally.

2 To ensure that your order is manufactured correctly please complete an order form and send via email.

3 An acknowledgement will be sent to you within 4 working days after receipt of your order to confirm that all technical details are correct and pricing approved.

4 The acknowledgement must be checked and any discrepancies highlighted within one working day of receipt of the acknowledgement.

order acknowledgements, changes and cancellations

The majority of our products are made to order. In order for us to ensure that we are manufacturing our product to your requirements, it is vitally important that you check your order acknowledgement as soon as you receive it and let us know of any discrepancies within one working day Any cancellations or changes must also be notified to us in writing within one working day of receipt of the acknowledgement; otherwise these items will be in production and will be chargeable. Andoras Ltd will not be liable for any errors made based on verbal instructions. If you make changes to an order after the acknowledgement has been sent, it may affect the original lead time quoted.

Where off standard product requires your approval, we cannot acknowledge or start production until we have received your verification of drawings or specifications. Similarly where we have raised queries, we cannot acknowledge or proceed with an order until these have been resolved. Therefore any delays in answering queries may affect the timing of delivery.

Acknowledged delivery dates are based on our best estimate and Andoras Ltd will not be held liable for any losses (financial or otherwise) if product is not delivered on the exact date specified by the acknowledgement.

painted & lacquered ranges

Andoras Ltd offers a selection of paints for all our door styles. Stains are available by special request. Note that all painted finishes are 10% sheen. Lacquered finish is normally 20% sheen although this can be varied on request. Painted and lacquered (natural finish) doors are manufactured using high quality hardwoods to which a superior quality paint or stain is then applied. All of our high quality hardwoods are kiln dried to a moisture content of 8-12%. However, timber, by nature, is susceptible to expansion and shrinkage depending on the environment in which it is installed. This means it could expand when there is an abundance of moisture in the air, particularly in winter or when excess moisture is prevalent in renovated or new builds. Contraction may occur in the summer months when the climate is drier. This potential natural movement of the timber can cause any layer of paint, lacquer, varnish etc that has been applied, to move with it and may result in panel shrinkage and hairline cracks along the joints of the door.

This is considered to be a positive feature, adding an authentic look and feel to the kitchen of any customer who appreciates the fine, natural qualities of timber. This must be explained to the customer upon sale of the product.

You will notice that all our painted doors are constructed with a decorative groove in the door joint. This is to eliminate the chances of noticeable hairline cracks in the joints caused by natural timber movement or excessive temperature changes.

Please note: In the event of hairline cracks appearing on the joints of painted non v-groove doors, Andoras Ltd will not be held liable.

HOW TO ORDER

1 Any order for painted/lacquered product must be sent via email.

2 An acknowledgement will be sent to you within 4 working days after receipt of your order to confirm that all technical details are correct and pricing approved.

3 The acknowledgement must be checked and any discrepancies highlighted within one working day of receipt of the acknowledgement.

4 Due to its bespoke nature, painted/lacquered product orders cannot be changed or cancelled once the order has been placed. Any additions will be treated as a new order.

5 No part painted orders will be despatched. Only full and complete orders will be despatched at any given time.

6 Although Andoras Ltd always tries to maintain a consistent colour match in batches of painted/lacquered product, there may be a slight colour variation between batches. An exact colour match cannot be guaranteed.

7 Due to the fact that painted product is crafted from solid timbera living product - it may be susceptible to cracking along the joints from natural movement, caused by changes in humidity. Touch-up paints are sold separately.

8 The painted/stained colour swatches that are printed in our marketing material are as closely matched as the printing process will allow. For more accurate matching, please request one of our actual painted timber swatches. Painted colours, however, will always vary slightly.

STANDARD PAINT COLOURS

TIMBER MFC BOARD OPTION

White Oak Natural

Character Oak Natural

Walnut Natural

Egger H3368

Egger H3368 ST9, Kronospan D8933, D1603, D8925 Egger 3704

MFC board options are available for most of our ranges. Please use the charts below as a guide when choosing a colour match for your chosen range. As colour matching between materials can never be exact, we recommend you obtain board samples prior to purchase in order to compare colours.

PAINT COLOUR

Airforce

Brilliant White Cardamom Cashmere Deep Forest Deep Heather Dust Grey Graphite Gun Metal Grey Heritage Green Indigo Ivory Lava Lavender Grey Light Grey Light Teal Marine Mussel Pantry Blue Parisian Blue Porcelain Sage Green Shell

Slate Blue Stone Stone Grey Taupe Grey Viridian Vintage Pink Willow

MFC BOARD OPTION

No Match

Egger W980 No match

Egger U702 No Match No Match

Egger U732

Egger U961 No Match No Match

Egger U599 No Match Egger U741 No Match

Egger U708 No Match No Match No Match No Match No Match

Egger W1200 No Match No Match No Match No Match Egger U727 Egger U750 No Match No Match No Match

colour matching service

Andoras Ltd offers a paint colour matching service for customers who request a paint colour match from either a RAL (European Standard) or BS (British Standard) paint swatch.

Please note: a special paint colour order will incur a longer lead-time than Andoras Ltd standard colours – this is due to the fact that paint must be sourced and a physical sample must be signed off by the customer before production begins. A surcharge will be applied according to order value to a maximum of 10% to any order that requires a paint match to a supplied reference. When placing an order for a special paint colour, not in the Andoras colour palette, the following procedure must apply:

1 A RAL or BS number and/or colour sample must be supplied to Andoras Ltd for accurate matching;

2 Andoras Ltd will source paint and provide a sample which will be available approximately 1 week (plus next delivery day) after the initial information has been provided. Andoras Ltd will also retain a copy of the sample for reference;

3 Andoras Ltd to receive written confirmation that the production sample is approved before production begins; and

4 Paint will then be ordered and production planned subject to normal lead times, after the delivery of paint to Andoras Ltd.

5 Any order for painted product must be sent via fax or email. An order acknowledgement will be sent to the customer upon receipt of any order.

6 Due to its bespoke nature, painted product orders cannot be changed or cancelled once the order has been placed. Any additions will be treated as a new order.

7 No part painted orders will be despatched. Only full and complete orders will be despatched at any given time.

8 Although Andoras Ltd always tries to maintain a consistent colour match in batches of painted product, there may be a slight colour variation between batches. An exact colour match cannot be guaranteed.

9 Due to the fact that painted product is crafted from solid timbera living product - it may be susceptible to cracking along the joints from natural movement, caused by changes in humidity.

Special colour paints can only be purchased by Andoras Ltd in a minimum of 5 litres. Where a sample is prepared but the order does not proceed, there will be a charge for the unused 5 litres of paint.

Important: The lead time for delivery of a colour sample is 1 to 2 weeks, depending on the availability of the paint. Once this sample is approved, the standard lead time applies. So, in theory, for all special finishes a maximum of up to 6 weeks may be required (lead times may be affected during holiday periods, Customer Services will advise upon ordering of any discrepancies).

ORDERS CANNOT COMMENCE MANUFACTURE UNTIL ALL PAINT COLOURS ARE CONFIRMED.

TIMBER RANGES

As with all Andoras Ltd products you can be sure that our timber ranges meet the highest standards expected by both our retailers and their customers. Add to that the versatility presented by our product range, as well as the affordable price tag and you have a recipe for success, no matter what way you look at it.

Our timber is sourced from the finest suppliers all over the world and due to our sophisticated design and superior workmanship your furniture will not only look beautiful but can also be expected to remain looking that way throughout its lifetime. Offered in a large number of styles and finishes, our timber ranges can be relied on to please even the most discerning customer.

SOURCING

In the production and sourcing of solid wood and veneered products, great care is exercised in the selection and quality of suitable materials. Every effort has been made to source FSC certified products.

GRAIN

As solid timber is a natural living product, it is not possible nor desirable to strive for total uniformity of shading and grain pattern. Our aim is, at all times, to operate within controlled parameters that recognise variations as both acceptable and aesthetically pleasing. Before installation, it is advisable that you place your frontals in a suitable arrangement in order to achieve a consistent look.

CURVED MOULDINGS

Curved mouldings are only crafted from solid timber. The nature of this process, coupled with the curved shape, will result in a proportion of end grain showing. This curved section will always be comparatively darker in colour than straight sections (just as the top of a door where rail meets stile shows end grain that is always darker in colour).

LIGHT AFFECTING COLOUR

Wood changes colour when exposed to light. Species of the timber and the intensity of exposure will affect the rate of change. Due to this we recommend that timber samples be changed regularly. It is advised that colour change is taken into consideration when replacing or fitting new doors some time after the original kitchen has been installed.

MOISTURE

Timber is hygroscopic meaning it absorbs and releases water depending on its surrounding environment. Due to this being out of our control, we recommend all timbers are stored and installed in areas that have been properly acclimatised over a period of time.

APPLICATION OF QUADRANT DOORS

When quadrant doors are aligned with a straight door onto a wall carcase, they require a selection of accessories to accompany them in order to achieve a consistent, seamless application – see Technical Application Guide.

GLASS SUPPLIED

The glass supplied as standard is 4mm plain toughened glass. Curved glass is supplied as laminated safety glass at 7.5mm thick.

kitchen door care & maintenance

PRE-INSTALLATION RECOMMENDATIONS

Ensure that all new builds or newly plastered rooms have been left to environmentally stabilise prior to the installation of new kitchen doors. Kitchen doors must not be installed into a damp, or moisture-rich environment as it will cause undesirable movement in the joints and panels of the door.

CLEANING AND MAINTENANCE

General cleaning advice for all door types:

• do not use wax furniture polish, abrasive or aggressive cleaners, bleach or other hypochlorate (chlorine) based cleaners, multipurpose cleaners, dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface;

• only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft, clean cloth only;

• ensure all cooking splashes are wiped immediately with a damp cloth; and

• dust with a soft cloth only.

TIMBER & VENEERED DOORS

cleaning: when cleaning timber doors you must follow the pattern of the grain. It is advisable to use a damp (not wet) cloth to remove fingerprints and marks, followed at once with a clean and dry soft cloth.

moisture: excess moisture can damage a timber product - it is recommended that susceptible areas such as around the sink are thoroughly maintained and kept dry at all times.

light: timber changes colour when exposed to light. The species of timber and intensity of exposure will affect the rate of change. Due to this we recommend that timber samples be changed regularly.

It is advised that colour change is taken into consideration when replacing or fitting new doors some time after the original kitchen has been installed.

PAINTED DOORS

cleaning: it is advisable to use a damp (not wet) cloth to remove fingerprints and marks, followed at once with a clean and dry soft cloth. light: painted finishes will change colour when exposed to lightthe intensity of exposure will affect the rate of change. Due to this, we recommend that painted swatches and door samples be changed regularly. We also advise that colour change is taken into consideration when replacing or fitting new doors some time after the original kitchen has been installed.

LACQUERED (NATURAL FINISH) DOORS

cleaning: it is advisable to use a damp (not wet) cloth to remove fingerprints and marks, followed at once with a clean and dry soft cloth. light: lacquered finishes will change colour when exposed to lightthe intensity of exposure will affect the rate of change. Due to this, we recommend that swatches and door samples be changed regularly.

We also advise that colour change is taken into consideration when replacing or fitting new doors some time after the original kitchen has been installed.

SANDED (RAW) DOORS

cleaning: sanded products are unfinished and therefore the care of these doors will depend on the type of finish applied, eg paint, stain, wax etc., see above for care guidance.

standard doors & georgian frames

Standard door and Georgian Frame designs differ according to door style. Here we show illustrations representative of each individual door and frame design and which door style they belong to. All Georgian Frames are supplied with glass as standard.

Illustrations shown are representative of 770 high Georgian Frames. Frame sizes higher than 770 will increase the number of horizontal bars and glass panes included in the frame, e.g. 770mm = 2 bars / 900mm and above = 3 bars

AURORA

Standard Door

CHARLOTTE

Georgian Frame Standard Door

Bead Detail

12

Please note: there is no Georgian Frame available for the Aurora door. Plain Frame available.

JASPER

Georgian Frame Standard Door

code: STD

REGENT

Georgian Frame Standard Door

YORKTON

Georgian Frame Standard Door

22mm

PETERBOROUGH

The code used for all Standard Doors is STD. The code used for all Georgian Frames is GGF. 30mm

Bead Detail Bead Detail

5

Bead Detail

12

22mm

Bead Detail

12

22mm

Georgian Frame Standard Door 30mm

SUTTON Standard Door

Georgian Frame

12

Bead Detail

5

20mm

plain & feature frames

Plain frames, feature frames, lattice frames and spindle doors are available in all ranges. Each frame design remains the same for all ranges.

GLASS

Glass is included in all plain and feature frames as standard. If you require your frames without glass, please state this clearly on your order form and a reduction will be applied to the list price.

PLAIN FRAME

PLAIN FEATURE FRAME (770 & 950)

FEATURE FRAME (770 & 950)

• includes clear glass

• available in all timbers

• painted finish applicable code: PLF

carved frames

• includes clear glass

• available in all timbers

• painted finish applicable code: PFF

• includes clear glass

• available in all timbers

• painted finish applicable code: FRF

Carved frames will generically have a square inside profile, no matter what type of mould is used on the inside of the kitchen doors.

GLASS Glass is included in all carved frames as standard. If you require your frames without glass, please state this clearly on your order form and a reduction will be applied to the list price.

DAMASCUS

GOTHIC

Sizes available: 770(h) x 500(w) 950(h) x 500(w) code: DAM

Sizes available: any height x 500mm(w) code: GOT

• These setting out dimensions are based on 40mm thick worktops.

• All dimensions shown are in millimetres.

• All dimensions here refer to fascia sizes unless stated otherwise.

• Check individual kitchen range contents for availability of specific fascia sizes & door types.

• Studio unit & tower unit options are shown on the next page.

• With appliances, follow the manufacturer’s installation instructions, particularly for hob-to-extractor/hood distances & ventilation.

• Please refer to individual range pages for definitive list of sizes.

PHU11-STD 800, 1200

PHU11-FRF 800, 1000

PDS1-STD 300, 400, 450, 500, 600

PDS1-STD 300, 400, 450, 500, 600

PHU10-FRF 400, 600

DS1-STD 400, 500, 600

PDS1-STD 300, 400, 450, 500, 600

DS3-STD 800, 1000, 1200

PDS1-STD 300, 400, 450, 500, 600

PHU11-STD 800, 1000

DS1-PLF 400, 500, 600

DS3-PLF 800, 1000, 1200

PDS1-STD

PHU11-FRF 800, 1000

PDS1-STD 300, 400, 450, 500, 600

PDS1-STD 300, 400, 450, 500, 600

DS1-PLF

PDS1-STD 300, 400, 450, 500, 600

PDS1-STD 300, 400, 450, 500, 600

DS3-STD 800, 1000, 1200

DS3-PLF 800, 1000,

ACCESSORIES

PCD-15

PCD-16

CORNICE A Solid

Available in: OAK WALNUT PAINTED

65(h) x 3050(w) x 71(d)

This cornice is only produced in solid timber and has accompanying curved cornice and curved pilaster caps.

CORNICE E Semi-Solid

Available in: OAK WALNUT PAINTED

65(h) x 3050(w) x 90(d)

This cornice is MDF veneer wrapped and cannot be used with any curved components.

CORNICE G Solid

Available in: OAK WALNUT PAINTED

95(h) x 3050(w) x 100(d)

This cornice is only produced in solid timber and has accompanying curved cornice and curved pilaster caps.

HIGH CORNICE (plain) Semi-Solid

Available in: OAK WALNUT PAINTED

140(h) x 2440(w) x 56(d)

This cornice is made from solid mouldings and an MDF veneered face and has accompanying curved cornice and curved pilaster caps.

CORPEL (4mm radius corners) Solid

Available in: OAK WALNUT PAINTED

28(h) x 2400(w) x 50(d)

This corpel is only produced in solid timber and cannot be used with any curved components.

PLINTH (TOESPACE) Semi-Solid

Available in: OAK WALNUT PAINTED

150(h) x 2440(w) x 19(d) - Oak & walnut 150(h) x 3040(w) x 19(d) - Painted

This plinth is MDF veneer wrapped and has accompanying curved components. Plain MDF will be 18mm thick.

SKIRTING PLINTH Solid

OAK* 166.06

WALNUT 189.78 PAINTED** 166.06

150(h) x3000(w) x 21(d)

This plinth is only produced in solid timber and has accompanying curved components. The top moulding is designed to disguise the head of a fixing nail. Can be ordered in any height.

High Cornice Pilaster Cap 0061

PILASTER A (45mm RADIUS) Solid

Available in: OAK WALNUT PAINTED 2700(h) 45(w) x 65(d)

Pilaster A is made from solid timber and is designed to fit with solid cornices A and G, as well as the accompanying curved components listed below. Whether you choose cornice A or G, there is a pilaster cap available for each style. For a high cornice, you have the option of choosing the high cornice pilaster cap shown.

Pilaster Cap G 0171G

Skirting Pilaster Base 0172A

PILASTER E Solid

Available in: OAK WALNUT PAINTED 2700(h) x 40(w) x 75(d)

This pilaster is produced in solid timber. It is designed to fit with any gable end.

CHAMFERED POST Solid

Available in: OAK WALNUT PAINTED 50(w) x 50(d)

This post is produced in solid timber. It has 6mm chamfers which stop 100mm from the top and 150mm from the bottom.

CHAMFERED POST Solid

Available in: OAK WALNUT PAINTED 100(w) x 100(d)

This post is produced in solid timber. It has 6mm chamfers which stop 100mm from the top and 150mm from the bottom.

FLUTED POST Solid

Available in: OAK WALNUT PAINTED 100(w) x 21(d)

This post is produced in solid timber. It has 5 routered flutes. Each flute is approx. 10mm wide and stops 100mm from the top and 150mm from the bottom.

BASE OVERLAP POST Solid

Available in: OAK WALNUT PAINTED 65(w) x 65(d)

This post is produced in solid timber. It can be manufactured in any height. To be used in a corner application of 2 base units.

WALL OVERLAP POST Solid

Available in: OAK WALNUT PAINTED 45(w) x 25(d)

This post is produced in solid timber. It can be manufactured in any height. To be used in a corner application of 2 wall units.

0133

MANTLE SHELF A (price per metre)

Solid

Available in: OAK WALNUT PAINTED

85(h) x 1000(w) x 191(d)

This shelf is manufactured using solid cornice profile A and is fixed to a solid under support board. The shelf is designed with a closed top.

0137

MANTLE SHELF E (price per metre)

Semi-Solid

Available in: OAK WALNUT PAINTED

75(h) x 1000(w) x 201(d)

This shelf is manufactured using veneered cornice profile E and is fixed to a solid under support board. The shelf is designed with a closed top.

0192

MANTLE SHELF F (price per metre) Semi-Solid

Available in: OAK WALNUT PAINTED 140(h) x 1000(w) x 170(d)

This shelf is manufactured using Aisling high cornice. The shelf is designed with a closed top and bottom.

0194

MONTREAL MANTLE SHELF (price per metre)

Solid

Available in: OAK WALNUT PAINTED

179(h) x 1000(w) x 221(d)

This shelf is manufactured using solid cornice profile A and is fixed to a solid under support board. The shelf is designed with a closed top.

0196

SUTTON MANTLE SHELF (price per metre)

Solid

Available in: OAK WALNUT PAINTED

140(h) x 1000(w) x 170(d)

This shelf is manufactured using solid timber on top and bottom. The mid section is made up of veneers wrapped around the entire shelf in order to eliminate end grain on the corners.

SMALL CORBALS

Solid

Available in: OAK WALNUT PAINTED

200(h) x 110(d)

These corbals are made from solid timber. Other heights and widths are available upon request.

MEDIUM CORBALS

Solid

Available in: OAK WALNUT PAINTED 200(h) x 110(d)

These corbals are made from solid timber. Other heights and widths are available upon request.

LARGE CORBAL Solid Available in: OAK WALNUT PAINTED 650(h) x 350(d)

These corbals are made from solid timber. Other heights and widths are available upon request.

OPEN DISPLAY UNIT Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 300(d)

This pelmet is produced in solid timber and has moulded decorative squares. Used commonly for decorating display units.

WINE RACK DISPLAY UNIT Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 300(d)

This pelmet is produced in solid timber and has moulded decorative squares. Used commonly for decorating display units.

PLATE RACK DISPLAY UNIT Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 300(d)

This pelmet is produced in solid timber and has moulded decorative squares. Used commonly for decorating display units.

PANTRY SPICE RACK

Semi-Solid

Available in: OAK WALNUT PAINTED

379(w) x 100(d)

This accessory is made from solid timber with a 6mm veneered backing board. Please see Application Guide for fixing instructions.

CRATE UNIT Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 581(d)

This unit is supplied fully assembled. Comes complete with 3 pull out crates. Crates are manufactured from white oak, as standard.

BRIDGING WINE RACK A Semi-Solid

Available in: OAK WALNUT PAINTED

300(h) x 920(w) x 300(d)

This unit is supplied fully assembled. Other sizes are available and priced upon request. The wine bottle dividers on this unit are not faced with 37mm framing.

CHOPPING BOARD

Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 200(w) x 461(d)

UNIT

0187

CHOPPING BOARD & TRAY UNIT Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 200(w) x 461(d)

This unit is supplied fully assembled. Comes complete with oak lacquered carcase, 2 oak chopping boards (sanded), 2 oak inset trays and facing frame (with finish the same as kitchen).

0132

TRAY SET (includes frame, 2 trays, drawer box & drawerfront) Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 200(w) x 461(d)

This unit is supplied fully assembled. Comes complete with oak lacquered carcase and 2 oak inset trays. Facing frame includes drawer front (with drawer box) and will be finished the same as kitchen.

0188 0283

X-BOX WINE RACK (base unit) Semi-Solid

Available in: OAK WALNUT PAINTED

770(h) x 600(w) x 461(d)

This unit is supplied fully assembled. Comes complete with oak lacquered carcase inside. Facing frame comes complete with drawer front (no drawerbox) and will be finished the same as kitchen.

X-BOX WINE RACK Semi-Solid

Available in: OAK WALNUT PAINTED

500(h) x 500(w) x 300(d)

This unit is supplied fully assembled. Comes complete with oak lacquered carcase inside. Facing frame will be finished the same as kitchen.

INTEGRATED APPLIANCE

SURROUND

Semi-Solid

Available in: OAK WALNUT PAINTED

676(h) x 962(w) x 530(d)

This unit is supplied fully assembled. Comes complete with oak lacquered carcase, 4 oak chopping boards (sanded) and facing frame (with finish the same as kitchen).

This unit comes fully assembled with four inscribed dovetail drawer boxes. Centre aperture is 460(h) x 600(w) x 530(d) and will house appliances such as coffee maker, microwave etc. There is an open back for ventilation purposes.

COFFEE POD STORAGE UNIT Semi-Solid

Available in: OAK

WALNUT PAINTED

200(h) x 926(w) x 260(d)

This unit comes fully assembled with four pull out trays. Pod holders are made to hold Nespresso and Dolce Gusto coffee pods. Please indicate when ordering, which brand of coffee pod you would like to accommodate.

SOLID T&G BOARDS (PACK OF 6)

Solid

Available in: OAK WALNUT PAINTED

2440(h) x 110(w) x 19(d)

All 6 boards are solid throughout. Each board has a tongue & groove on each side. However, one board of the pack will have one leading face edge.

T&G GABLE END (SAW TRACKED) Semi-Solid

Available in: OAK WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF) 2440(h) x 650(w) x 19(d)

This v-grooved gable end is covered on both long sides using a 0.6mm solid edging.

V-GROOVED GABLE END Semi-Solid

Available in: OAK

WALNUT

PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF) 2440(h) x 650(w) x 19(d)

This v-grooved gable end is covered on both long sides using a 0.6mm solid edging.

BEADED GABLE END

Semi-Solid

Available in: OAK WALNUT

PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF)

2440(h) x 650(w) x 19(d)

This beaded gable end is covered on both long sides using a 0.6mm solid edging.

0161

650(w)

PLAIN GABLE END Semi-Solid

Available in: OAK

WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF) 2440(h) x 650(w) x 19(d)

This plain gable end is covered on both long sides using a 0.6mm solid edging.

EDGED BOARD PLAIN (price per m2)

Semi-Solid

Available in: OAK WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF)

Any size of plain board can be acquired through your Special Request Form. Please specify height and width. Board is supplied edged all round, as standard and is 19mm thick.

EDGED BOARD T&G (SAW TRACKED [price per m2]) Semi-Solid

Available in: OAK WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF)

Any size of T&G board can be acquired through your Special Request Form. Please specify height and width. Board is supplied edged all round, as standard and is 19mm thick.

EDGED BOARD V-GROOVED (price per m2)

Semi-Solid

Available in: OAK WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF)

Any size of V-grooved board can be acquired through your Special Request Form. Please specify height and width. Board is supplied edged all round, as standard and is 19mm thick.

EDGED BOARD BEADED (price per m2) Semi-Solid

Available in: OAK WALNUT PAINTED GRAIN (ash MDF) PAINTED SMOOTH (MDF)

Any size of beaded board can be acquired through your Special Request Form. Please specify height and width. Board is supplied edged all round, as standard and is 19mm thick.

benches, tables & miscellaneous components

0121

PASTRY BENCH WITH TOP Solid

Available in: OAK WALNUT PAINTED

940(h) x 1000(w) x 500(d)

This bench can be ordered in any width or depth. When ordering the bench painted, please specify whether you want bottom slats natural or painted. Bench comes complete with sanded 70mm worktop.

0122

PASTRY BENCH WITHOUT TOP Solid

Available in: OAK WALNUT PAINTED

870(h) x 1000(w) x 500(d)

This bench can be ordered in any width or depth. When ordering the bench painted, please specify whether you want bottom slats natural or painted.

PASTRY

0193A

Solid

BENCH WITH TOP & DRAWERS

Available in: OAK WALNUT PAINTED

940(h) x 1000(w) x 500(d)

This bench can be ordered in any width or depth. When ordering the bench painted, please specify whether you want bottom slats natural or painted. The bench comes complete with sanded 70mm worktop and 2 oak dovetailed slide-in drawers (no runners).

PASTRY BENCH WITH DRAWERS

Solid

Available in: OAK WALNUT PAINTED

870(h) x 1000(w) x 500(d)

ONLY

0128

WINE RACK RAIL Solid

Available in: OAK WALNUT PAINTED

63(h) x 1200(w) x 18(d)

This bottle rail is made from solid timber and is designed to hold the neck of the bottle. It is a single item that is to be cut to the desired length to be used in any width of carcase.

0211

KNIFE BLOCK Solid

Available in: OAK WALNUT 422(h) x 284(w) x 55(d)

This knife block is designed to suit a 450 deep drawerbox. It can be incorporated into any cutlery insert. It is shown here at 284mm wide to suit a 312mm drawerbox (400mm wide unit).

0167 0168

972mm diameter 672mm diameter

BUTCHER’S BLOCK Solid

Available in: OAK WALNUT 60(h)

This solid circular worktop (sanded) is manufactured with end grain on the surface, in the traditional butcher block method. Item 0167 should be used with CD-3 curved doors and item 0168 should be used with CD-4 curved doors.

0210

GLASS HOLDER Solid

Available in: OAK WALNUT PAINTED

50(h) x 1200(w) x 250(d)

0127

This bench can be ordered in any width or depth. When ordering the bench painted, please specify whether you want bottom slats natural or painted. The bench comes complete with 2 oak dovetailed slide-in drawers (no runners).

WINE RACK KIT Solid

Available in: OAK WALNUT PAINTED

45(h) x 570(w) x 202(d)

This kit comes in 4 separate pieces and is designed to fit any width of unit up to 600mm. The scalloped part of the kit is designed to hold the base of the wine bottle. The neck of the bottle rests on the straight rail.

0281

This glass holder is supplied 250mm deep, as standard, to suit wall units. However, it is available in any width or depth and will be priced accordingly.

CONICAL PEDESTAL Solid

Available in: OAK WALNUT PAINTED

720(h) x 360(w) x 180(d)

This pedestal is designed to be used to support a worktop (usually circular) and is up to 900mm in diameter approximately. It is semi-circular shaped and is normally fixed onto a gable side.

CHOOSE YOUR TOP SECTION

CHOOSE YOUR BOTTOM SECTION

0197

TOP SECTION A Solid

246(h) x 964(w) x 300(d)

Available in: WHITE OAK WALNUT

This bottle rack section comes as one complete unit and is ready for installation.

0198

TOP SECTION B Solid

50(h) x 964(w) x 300(d)

Available in: WHITE OAK WALNUT

This glass holder section comes as one complete unit and is ready for installation.

0199

TOP SECTION C Solid

21(h) x 964(w) x 300(d) x 3

Available in: WHITE OAK WALNUT

Top Section C is supplied as a unit of 3 shelves, as standard. Extra shelves can be ordered through a Special Request Form. The shelves are designed to ensure clear access to pantry items, as shown in the illustration below. To complete this pantry unit, your remaining options for the bottom section are 0282, 0207 and 0208.

BIRD’S EYE VEW OF SHELF

BOTTOM SECTION A Solid

750(h) x 964(w) x 394(d)

Available in: WHITE OAK WALNUT

This single aperture unit comes complete with drawers, face frame and carcase and is fully assembled. Drawers are drop front and will be notched out for runners. A 30mm solid worktop is included, as standard.

BOTTOM SECTION B Solid

750(h) x 964(w) x 394(d)

Available in: WHITE OAK WALNUT

This 7 aperture unit comes complete with drawers, face frame and carcase and is fully assembled. Dovetail detailing is shown on the face of the drawers. A 30mm solid worktop is included, as standard.

0282 0207 0208

BOTTOM SECTION C Solid

750(h) x 964(w) x 394(d)

Available in: WHITE OAK WALNUT

This 5 aperture unit comes complete with drawers, face frame and carcase and is fully assembled. Dovetail detailing is shown on the face of the drawers. A 30mm solid worktop is included, as standard.

Canopies are available in various heights or widths.

CANOPY 0105E

Semi-Solid

Available in: OAK WALNUT PAINTED

670(h) x 1400(w) x 495(d)

This canopy will come complete using the same door as your chosen kitchen. It can be ordered at any height, width or depth. This canopy is not advisable for corner installation.

CANOPY 0106P

Semi-Solid

Available in: OAK WALNUT PAINTED

997(h) x 1800(w) x 473(d)

This canopy comes in 3 main sections: top box, mid moulded section and the corbals. It can be ordered at any height, width or depth. This canopy is not advisable for corner installation.

CANOPY 0181Q

Semi-Solid

Available in: OAK WALNUT PAINTED

690(h) x 1400(w) x 473(d)

This canopy comes in 2 main sections: top box and moulded section. It can be ordered at any height, width or depth. This canopy is not advisable for corner installation.

CANOPY 0191C

Semi-Solid

Available in: OAK WALNUT PAINTED

730(h) x 1600(w) x 590(d)

This canopy will come complete using the same door as your chosen kitchen. It can be ordered at any height, width or depth.This canopy is not advisable for corner installation.

overmantles

All Overmantle drawings on this page are examples of 1400mm(h) x 1800mm(w) overmantles. Variable heights or widths of overmantle are available. All overmantles are supplied as a kit of parts.

0275

OVERMANTLE 0275P

1 mantle shelf: 165 x 1750 x 150

2 mantle leg: 1400 x 250 x 400

3 bridging top box: 525 x 1500 x 500

0276

OVERMANTLE 0276S

Available in: PAINTED

This overmantle is designed to sit on a worktop and be fixed directly to the back wall. No additional carcase is needed. The inside of both legs contain small alcove shelves. Is only produced with a painted finish.

Available in: OAK WALNUT PAINTED

This overmantle is designed to be fixed to a purpose-built carcase (not supplied).

1 mantle leg: 1400 x 350 x 21

2 mantle shelf: 140 x 1700 x 160

3 medium corbel: 200 x 110 x 100

4 bridging door: 450 x 1100 x 21

5 bridging filler: 240 x 1100 x 21

0277

OVERMANTLE 0277Y

Available in: PAINTED

This overmantle is designed to be fixed to a purpose-built carcase (supplied). Is only produced with a painted finish.

1 bridging door : 365 x 1800 x 21

2 mantle shelf: 85 x 1800 x 191

3 pelmet: 100 x 1300 x 21

4 medium corbel: 200 x 110 x 120

5 mantle leg: 1400 x 250 x 450

212 262 312 362 412 462 512 612 712 812 912 1012

210 260 310 360 410 460 510 610 710 810 910 1010

OAK NATURAL

WALNUT NATURAL

OAK NATURAL OAK NATURAL OAK NATURAL

WALNUT NATURAL

WALNUT NATURAL WALNUT NATURAL

OAK NATURAL

OAK NATURAL OAK NATURAL OAK NATURAL

WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL

OAK NATURAL OAK NATURAL

OAK NATURAL

OAK NATURAL

OAK NATURAL OAK NATURAL

WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL

OAK NATURAL OAK NATURAL

WALNUT NATURAL

OAK NATURAL

WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL

WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL WALNUT NATURAL

drawer boxes (using 37mm frame material) PLEASE NOTE: to order dovetail drawer boxes please complete the appropriate section on the accessories order form on page 31.

order forms

HOW TO PLACE AN ORDER:

1 This Mandatory Order Form must be submitted along with your Door Order Form, Accessory Order Form, Special Request Order Form and Overmantle Order Form, as required.

2 A NEW Mandatory Order Form must be completed for each door style, timber or finish required and will be treated as a separate order.

contact name company customer order no./ref.

fax your order to: +353 (0)74 9320752 or email your order to: orders@andoras.com

Please provide details of any special requests on page 32

1 DOOR STYLE:

2 TIMBER & FINISHES ( % to be added or subtracted from the book price, where indicated) sanded natural painted primed off standard paint white oak

12% book price N/A N/A N/A character oak

walnut 12% book price + 10% book price + 20% hardwood smooth 15% N/A book price 10% + 10%

_ 12% book price + 10% book price + 20% hardwood grain 15% N/A book price 10% + 10%

6 GLASS is supplied as standard

All door prices* include the supply of clear glass as required, please indicate if you do not require glass.

without glass ( 10.00 per final door price)

white cotton

marine indigo sage green

5 INFRAME MOULDING OPTIONS

cardamom willow light teal viridian heritage green deep forest

4 PAINT COLOURS please refer to page 02 for swatch samples brilliant white lava dust grey mussel shell taupe grey stone stone grey other, please state:

porcelain pantry blue gun metal grey airforce graphite parisian blue slate blue

light grey

cashmere vintage pink lavendar grey deep heather

7 HINGES

butt (chrome)

*excludes curved glass

outside profile: inside profile:

3 Please complete the number of pages per order at the top of each form where indicated. cockbead cockbead chamfer chamfer

Would you like the standard inframe moulding applicable to your chosen door style? (see page 17 for details) Yes / No If not please choose from below: square pencil round

square pencil round

butt (satin) amerock full wrap (antique pewter) amerock partial wrap (antique pewter)

butt (brass) amerock full wrap (chrome) amerock partial wrap (chrome)

amerock full wrap (matt brass) amerock partial wrap (matt brass)

QTY: 11.70 each (supply only) QTY: 11.70 each (supply only)

QTY: 21.80 each (factory fitted) QTY: 21.80 each (factory fitted)

9 MAGNETIC CATCHES recessed (factory fitted) recessed (supply only)

standard brass (supply only) standard chrome (supply only)

QTY: 14.60 each

QTY: 14.60 each QTY: 20.70 each QTY: 9.20 each

(please attach to your mandatory order form)

Please provide a full list of the door combinations you require including height, width, door type and code. Codes for all door combinations can be found on pages 9, 10 and 11, for your information. Please specify the door type also, ie standard door, plain frame, feature frame, georgian frame, lattice frame, spindle door, carved frame or curved door. Details of door types can be found on pages 7 and 8.

HEIGHT WIDTH

CODE DOOR TYPE (see page 11)

HINGE POSITION QTY

LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH LH RH

PILASTERS & ACCOMPANYING COMPONENTS

CODE SIZE ACCESSORY NAME

0066 0058A 0171G 0061 0172A

POSTS

2700 x 45 x 65 65mm high 94mm high 140mm high 150mm high

PILASTER A (45mm RADIUS)

PILASTER CAP A (45mm RADIUS)

PILASTER CAP G

HIGH CORNICE PILASTER CAP SKIRTING PILASTER BASE

CHAMFERED POST

150mm high 150mm high

Curved accessories for CD-6 0040 0222

CONCAVE STANDARD PLINTH CONCAVE SKIRTING PLINTH

Pilaster A (45mm radius) 0079 0080 0081 0082 0083 0084 0085 0086 0092 0093 0094 0095 0070

900 x 50 x 50 1250 x 50 x 50 900 x 100 x 100 1250 x 100 x 100 2300 x 100 x 100 900 x 100 x 21 1250 x 100 x 21 2300 x 100 x 21 720 x 65 x 65 900 x 65 x 65 720 x 45 x 25 900 x 45 x 25 2700 x 40 x 75

CANOPIES

CHAMFERED POST

CHAMFERED POST

CHAMFERED POST

CHAMFERED POST

FLUTED POST

FLUTED POST

FLUTED POST

BASE OVERLAP POST

BASE OVERLAP POST

WALL OVERLAP POST

WALL OVERLAP POST

PILASTER E

0105 0106 0181 0191

670 x 1400 x 495 997 x 1800 x 473 690 x 1400 x 473 730 x 1600 x 590

ELWIN CANOPY PHOENIX CANOPY QUEBEC CANOPY CHARLOTTE CANOPY

150mm high 150mm high

Curved accessories for CD-15 Curved accessories for CD-16

Curved accessories for CD-12 0020 0236 0237 0043 0238 0020 0236 0237 0043 0238

65mm high 94mm high 140mm high 150mm high 150mm high 65mm high 94mm high 140mm high 150mm high 150mm high

PURE CURVE STANDARD PLINTH PURE CURVE SKIRTING PLINTH

QUADRANT CORNICE A QUADRANT CORNICE G QUADRANT HIGH CORNICE (PLAIN) LARDER STANDARD PLINTH LARDER SKIRTING PLINTH QUADRANT CORNICE A QUADRANT CORNICE G QUADRANT HIGH CORNICE (PLAIN) LARDER STANDARD PLINTH LARDER SKIRTING PLINTH

DOVETAIL DRAWER BOXES

CHOSEN TIMBER

DRAWER RUNNER TYPE

PLEASE SPECIFY ACTUAL DRAWER DIMENSIONS (NOT UNIT SIZE).

HEIGHT WIDTH DEPTH DETAILS

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

CUTLERY INSERT: YES NO

novelle - special requests order form

Please provide details (including detailed technical drawings) of any special requests you may have regarding solid timber accessories.

CANOPY 0105E

OVERMANTLE 0275P

CANOPY 0106P

OVERMANTLE 0276S

CANOPY 0181Q

OVERMANTLE 0277Y

CANOPY 0191C

Height:

You can order door samples using the forms on pages 34 and 35. If you require more door samples than the order forms here allow, please photocopy page 35, fill in all details and confirm the number of pages you have in total at the top of the form before sending it through to us. Contact details entered on page 34 are mandatory with every door sample order. All door samples provided are 570mm x 400mm doorsets.

HOW TO PLACE AN ORDER:

1 Enter all contact details in the form below.

2 Use the tick boxes to choose the options for each door sample you require. Photocopy the form on page 35 if necessary.

3 Enter the full number of pages you are submitting at the top of each page and fax or email all forms to:

CONTACT DETAILS CHOOSE A PAINT COLOUR CHOOSE A HINGE (optional)

contact name company customer order no./ref.

Butt Hinge (satin) Amerock Partial Wrap (ant. pewter)

Butt Hinge (brass) Amerock Full Wrap (matte brass)

CHOOSE A MAGNETIC CATCH

(optional)

DOOR SAMPLE 1

CHOOSE A DOOR STYLE

Aurora Charlotte Jasper Peterborough

Regent Sutton Yorkton

DOOR FIXING Fixed Not fixed

CHOOSE A TIMBER

White Oak Natural Character Oak Natural

Walnut Natural Painted Hardwood (grain finish)

Painted Hardwood (smooth finish)

CHOOSE AN INFRAME MOULDING

Outside Profile:

Standard, or choose an Cockbead Chamfer Square Pencil Round

Inside Profile:

Cockbead Chamfer Square Pencil Round

DOOR SAMPLE 1

CHOOSE A DOOR STYLE

Aurora Charlotte Jasper Peterborough

Regent Sutton Yorkton

DOOR FIXING Fixed Not fixed

CHOOSE A TIMBER

White Oak Natural Character Oak Natural

Walnut Natural Painted Hardwood (grain finish)

Painted Hardwood (smooth finish)

CHOOSE AN INFRAME MOULDING

Outside Profile:

Standard, or choose an Cockbead Chamfer Square Pencil Round

Inside Profile:

Cockbead Chamfer Square Pencil Round

CHOOSE A PAINT COLOUR

brilliant white lava dust grey

white cotton

mussel shell

taupe grey stone stone grey other, please state:

marine indigo sage green

CHOOSE A HINGE (optional)

cardamom willow light teal viridian heritage green deep forest

cashmere vintage pink lavendar grey deep heather novelle - door sample order form (please attach to order form on page 34) page of

light grey

Butt Hinge (chrome) Amerock Full Wrap (ant. pewter)

Butt Hinge (satin) Amerock Partial Wrap (ant. pewter)

Butt Hinge (brass) Amerock Full Wrap (matte brass) Amerock Full Wrap (chrome) Amerock Partial Wrap (matte brass) Amerock Partial Wrap (chrome)

CHOOSE A MAGNETIC CATCH

Standard Recessed

CHOOSE A PAINT COLOUR

(optional)

brilliant white lava dust grey

white cotton

mussel shell taupe grey stone stone grey other, please state:

marine indigo sage green

CHOOSE A HINGE (optional)

cardamom willow light teal viridian heritage green deep forest

porcelain pantry blue gun metal grey airforce graphite parisian blue slate blue

light grey

cashmere vintage pink lavendar grey deep heather

Butt Hinge (chrome) Amerock Full Wrap (ant. pewter)

Butt Hinge (satin) Amerock Partial Wrap (ant. pewter)

Butt Hinge (brass) Amerock Full Wrap (matte brass) Amerock Full Wrap (chrome) Amerock Partial Wrap (matte brass) Amerock Partial Wrap (chrome)

CHOOSE A MAGNETIC CATCH (optional)

Standard Recessed

hinges

BUTT HINGES

AMEROCK HINGES

Butt

Butt

Butt

Butt

Amerock

Amerock

Amerock

Amerock

Amerock

Amerock

1. DEFINITIONS

In these conditions, unless the context requires otherwise:

1.1 ‘Buyer’ means the person who buys or agrees to buy the Goods from the Seller and who shall not be a consumer;

1.2 ‘Conditions’ means the terms and conditions of sale set out in this document and any special terms and conditions agreed in writing by the Seller;

1.3 ‘Delivery Date’ means the date specified by the Seller when the goods are to be delivered;

1.4 ‘Goods’ means the articles which the Buyer agrees to buy from the Seller;

1.5 ‘Price’ means the price for the Goods excluding carriage, packing, insurance and VAT; and

1.6 ‘Seller’ means Andoras, Units 1-4, Lisfannon Industrial Estate, Buncrana, Donegal, Ireland.

2. CONDITIONS APPLICABLE

2.1 The Conditions shall apply to all contracts for the sale of Goods by the Seller to the Buyer to the exclusion of all other terms and conditions including any terms or conditions which the Buyer may purport to apply under any sales offer, purchase order or similar document or in correspondence.

The Conditions constitute the entire understanding between the Seller and the Buyer with respect to the subject matter covered by the contract of sale and supersede all previous agreements and understandings between the parties.

2.2 All orders for Goods shall be deemed to be an offer by the Buyer to purchase the Goods therein mentioned for the Price pursuant to these Conditions. In the event that any of the Goods are unavailable, the order shall be deemed to be an order for only those Goods which are available and may be accepted by the Seller accordingly.

2.3 An order is accepted by the Seller upon the allocation of the Goods to the order such that they are ascertainable. For the avoidance of doubt, acceptance of delivery of the Goods shall be deemed conclusive evidence of the Buyer’s acceptance of these Conditions.

2.4 Any variation to these Conditions (including any special terms and conditions agreed between the parties) shall be inapplicable unless agreed in writing by the Seller.

3. PRICE AND PAYMENT

3.1 The Price shall be the price stipulated in the Seller’s published price list current at the date of delivery of the Goods. In the case of bespoke Goods, the Price shall be the price agreed in writing between the parties.

3.2 The Price is exclusive of VAT which shall be due at the rate prevailing on the date of the Seller’s invoice.

3.3 The Price is ex works and where the Seller agrees to arrange for the Goods to be sent to the Buyer, the Buyer shall be responsible for the costs of loading, carriage and unloading.

3.4 The Seller may by giving notice to the Buyer at any time up to 7 days before delivery increase the Price of the Goods to reflect any increase in the cost to the Seller which is due to factors occurring after the making of the contract of sale which are beyond the reasonable control of the Seller (including, without limitation, foreign exchange fluctuations, taxes and duties and the cost of labour, materials and other manufacturing costs), provided that the Buyer may cancel this contract within

3.5 Payment of the Price, any charges for carriage and insurance and VAT shall be made in a manner acceptable to the Seller in cleared funds with order unless credit facilities have been agreed, in which case, payment shall be made on or before the last working day of the month following the end of the month in which the invoice is rendered. Time for payment shall be of the essence. If means of payment is tendered and, if a cheque, dishonoured or, if credit card details, payment is refused, the Buyer shall pay to the Seller as and by way of agreed liquidated damages an additional amount of £20/€25.

3.6 Interest on overdue invoices shall accrue from the date when payment becomes due until the date of payment at a rate of 1.5% per month or part month and shall accrue at such a rate after as well as before any judgment.

4. THE GOODS

4.1 The Goods shall accord with the description contained in the Seller’s published price list.

4.2 The Seller may from time to time make the changes to the said

5.

description which are required to comply with any applicable safety or statutory requirements or which do not materially affect the quality or fitness for purpose of the Goods.

INTELLECTUAL PROPERTY

5.1 The intellectual property rights in the Goods shall as between the parties be the property of the Seller. Where any designs or specifications have been supplied by the Buyer for manufacture by the Seller or to the order of the Buyer, then the Buyer warrants that the use of those designs or specifications for the manufacture, processing, assembly or supply of the Goods shall not infringe the rights of any third party.

6. DELIVERY OF GOODS

6.1 The Goods shall be delivered to the Buyer either ex works or upon the Goods passing into the control of the Buyer or the Buyer’s agent, whichever may be the earlier. The risk in the Goods shall pass to the Buyer upon such delivery taking place. Time for delivery shall not be of the essence.

6.2 The Seller may deliver the Goods by separate instalments. The Seller may raise a separate invoice and require payment for each instalment.

6.3 The Seller shall not be liable for any loss or damage whatever due to failure by the Seller to deliver the Goods (or any of them) promptly or at all.

6.4 Notwithstanding that the Seller may have delayed or failed to deliver the Goods (or any of them) promptly the Buyer shall be bound to accept delivery and to pay for the Goods in full provided that delivery shall be tendered at any time within 3 months of the Delivery Date.

6.5 If so requested, the Seller shall arrange for carriage of the Goods to the Buyer’s address by means of an independent courier, which shall be the agent of the Buyer. The costs of carriage and insurance shall be charged to the Buyer in accordance with the schedule of rates negotiated by the Seller with the courier and then prevailing and shall be paid by the Buyer without any set-off or other withholding whatever. Such costs shall fall due for payment on the date for payment of the Price.

7. ACCEPTANCE OF THE GOODS

7.1 The Buyer shall inspect the Goods on receipt and shall mark any delivery note to record any alleged damage in transit.

7.2 The Buyer shall within 3 working days of receipt notify the Seller of any alleged defect, shortage in quantity, damage or failure to comply with description, written notification to be sent to the following e-mail address, namely orders@andoras.com, and not otherwise.

7.3 The Buyer shall afford the Seller an opportunity to inspect the Goods within a reasonable time following delivery and before any use is made of them.

7.4 If the Buyer shall fail to comply with the provisions in Conditions 7.1-7.3, the Goods shall be conclusively presumed to be in accordance with the contract and free from any defect or damage which would be apparent on a reasonable examination of the Goods and the Buyer shall be deemed to have accepted the Goods.

7.5 After acceptance the Buyer shall not be entitled to reject Goods which are not in accordance with the contract. Notwithstanding Section 35A(1) of the Sale of Goods Act 1979, acceptance of some of the Goods by the Buyer, whether conforming to the contract or not, shall deprive the Buyer of the right to reject the rest of the Goods, whether conforming to the contract or not.

7.6 If the Buyer properly rejects any of the Goods which are not in accordance with the contract, the Buyer shall nonetheless pay the Price for such Goods unless the Buyer promptly gives notice of rejection to the Seller and at the Buyer’s cost return such Goods to the Seller before the date when payment of the Price is due.

8. RETURNS

8.1 No Goods delivered to the Buyer which are in accordance with the contract will be accepted for return without the prior written approval of the Seller and on terms to be determined at the absolute discretion of the Seller.

8.2 Goods returned without the prior written approval of the Seller or otherwise than in accordance with the terms stipulated may at the absolute discretion of the Seller be returned to the Buyer or stored at the Buyer’s cost without prejudice to any rights or remedies the Seller may have.

9. TITLE

9.1 In spite of delivery having been made, property in the Goods shall not pass from the Seller until:

9.1.1 the Buyer shall have paid the Price plus VAT in full; and 1.

9.1.2 no other sums whatever shall be due from the Buyer to the Seller.

9.2 Until property in the Goods passes to the Buyer in accordance with Condition 9.1, the Buyer shall hold the Goods and each of them on a fiduciary basis as bailee for the Seller. The Buyer shall store the Goods (at no cost to the Seller) separately from all other goods in its possession and marked in such a way that they are clearly identified as the Seller’s property.

9.3 Notwithstanding that the Goods (or any of them) remain the property of the Seller the Buyer may sell or use the Goods in the ordinary course of the Buyer’s business at full market value for the account of the Seller. Any such sale or dealing shall be a sale or use of the Seller’s property by the Buyer on the Buyer’s own behalf and the Buyer shall deal as principal when making such sales or dealings. Until property in the Goods passes from the Seller the entire proceeds of sale or otherwise of the Goods shall be held in trust for the Seller and shall not be mixed with other money or paid into any overdrawn bank account and shall be at all material times identified as the Seller’s money.

9.4 The Seller shall be entitled to recover the Price (plus VAT) notwithstanding that property in any of the Goods has not passed from the Seller.

9.5 Until such time as property in the Goods passes from the Seller the Buyer shall upon request made at any time and for any or no stated reason deliver up such of the Goods as have not ceased to be in existence or resold to the Seller. If the Buyer fails to do so the Seller may enter upon any premises owned, occupied or controlled by the Buyer where the Goods are situated and repossess the Goods. On the making of such request, the rights of the Buyer under Condition 9.3 shall cease.

9.6 The Buyer shall not pledge or in any way charge by way of security for any indebtedness any of the Goods which are the property of the Seller. Without prejudice to the other rights of the Seller, if the Buyer does so all sums whatever owing by the Buyer to the Seller shall forthwith become due and payable.

9.7 The Buyer shall insure and keep insured the Goods to the Price against ‘all risks’ to the reasonable satisfaction of the Seller until the date that property in the Goods passes from the Seller, and shall whenever requested by the Seller produce a copy of the policy of insurance. Without prejudice to the other rights of the Seller, if the Buyer fails to do so all sums whatever owing by the Buyer to the Seller shall forthwith become due and payable.

10. LIABILITY

10.1 the maximum liability of the Seller in respect of defective Goods is, at its option, to repair or replace any defective Goods and in the event that Goods cannot, in the Seller’s opinion, be replaced supply a similar or equivalent product;

10.1.1 the Buyer must, at the time of making a claim, produce a dated proof of purchase of the Goods;

10.1.2 the Goods shall have been kept, at all times, either in an appropriate environment in the Buyer’s store or in a private domestic residence and not subjected to any abnormal use or conditions at any time;

10.1.3 the Goods shall have been treated and maintained in compliance with the written guidance concerning the Goods and their care and maintenance, insofar as the same applies to Goods, set out in the Seller’s published price list;

10.1.4 the Buyer shall have notified the claim to the Seller within 30 days of the date on which the defect first became manifest;

10.1.5 no person shall, at any time, have made or attempted to make any repair or alteration to the Goods or commissioned or instructed any third party to do so;

10.1.6 for the avoidance of doubt, defects shall not include the consequences of normal wear and tear or damage caused by or arising from accident, misuse, abuse, improper installation, maintenance or cleaning.

10.2 all terms, conditions and representations (whether implied or made expressly) whether by the Seller its servants or agents or otherwise relating to the quality and/or fitness for the purpose of the Goods or any of the Goods are excluded to the fullest extent permitted by law.

10.3 In the event that the Buyer rejects any Goods, the Buyer shall have no further rights whatever in respect of the supply to the Buyer of such

Goods or the failure by the Seller to supply Goods which conform to the contract of sale.

10.4 In the event that the Buyer accepts or has been deemed to have accepted any Goods, then the Seller shall have no liability whatever to the Buyer in respect of those Goods.

10.5 The Seller shall not be liable to the Buyer for late delivery or short delivery of the Goods.

10.6 The Seller shall be under no liability whatever to the Buyer for any indirect loss and/or expense (including loss of profit) suffered by the Buyer arising out of a breach by the Seller of this contract and/or any negligence of or breach of duty by the Seller.

10.7 In the event of any breach by the Seller of this contract and/or any negligence of and/or any other breach of duty by the Seller, the remedies of the Buyer shall be limited to damages. Under no circumstances shall the liability of the Seller in respect of any Goods exceed the Price of those Goods.

11. REMEDIES OF THE SELLER

11.1 If the Buyer fails to accept delivery of any Goods ordered by the Buyer and/or make any payment on the due date and/or commits any other breach of this contract of sale, without prejudice to any of the Seller’s other rights the Seller may:

11.1.1 suspend or cancel deliveries of any of the Goods (or Goods supplied under any other contract with the Buyer) as may have been ordered but not at that time delivered to the Buyer; and/or

11.2.1 appropriate any payment made by the Buyer to such of the Goods (or Goods supplied under any other contract with the Buyer); and/or 11.3.1 treat this contract and any other contract between the Seller and the Buyer as repudiated by the Buyer with the result that all sums to become payable under any such contract shall immediately fall due for payment as the Seller may in its sole discretion think fit.

11.2 If any distress or execution shall be levied upon any of the Buyer’s goods or if the Buyer offers to make any arrangement with its creditors or if any bankruptcy petition is presented against the Buyer or the Buyer is unable to pay its debts as they fall due or if being a limited company any resolution or petition to wind up the Buyer (other than for the purpose of amalgamation or reconstruction without insolvency) shall be passed or presented or if a receiver, administrator, administrative receiver or manager shall be appointed over the whole or any part of the Buyer’s business or assets or if the Buyer shall suffer any analogous proceedings under foreign law all sums outstanding in respect of the Goods shall become payable immediately. The Seller may in its absolute discretion and without prejudice to any other rights which it may have suspend all future deliveries of Goods to the Buyer and/or terminate the contract without liability upon its part.

11.3 In the event that the Buyer declines to accept the Goods in breach of this contract, the Buyer shall pay to the Seller as and by way of agreed liquidated damages an amount equal to the price of the Goods less the net proceeds received by the Seller on re-selling the Goods after deducting the costs and expenses of re-sale.

12. NOTICES

12.1 Any notice under or in connection with this contract of sale shall be in writing and shall, unless otherwise stated, be served on the party by hand delivery at or by special delivery post to the address of the Seller set out in Condition 1 or the address of the Buyer set out in the order form or other pre-contractual correspondence.

12.2 In the absence of evidence of earlier receipt any notice shall be deemed to be duly served:

12.2.1 if delivered personally when left at the address referred to in Condition 12.1;

12.2.2 if sent by recorded delivery 3 days after posting.

13. NO SET-OFF

13.1 The Buyer may not withhold payment of any invoice or other amount due to the Seller by reason of any right of set off or counterclaim which the Buyer may have or allege to have or for any reason whatever.