ENCAPSULATION PELLETIZATION AND EDIBLE FILM SOLUTIONS
Integrated Continuous Extruder A Fully integrated continuous drug pelletization system including a Extruder (Axial, Cone, Dome, Radial, Die roller, Basket extruder, etc.), with twin bucket weigh assembly and twin spherodizer for continuous pelletization, suitable for Large scale production of pellets. This system fully integrates the extrusion and twin spheronization processes for converting drug formulations into free flowing spheres of controlled shape and size of various sizes from 400 top large micron pellet sizes as desired.
STANDARD FEATURES : Compact design GMP suites for continuous pellet production. System components easily accessible for cleaning and maintenance. Fully integrated with Allen Bradley PLC controls 21 CFR certified. Spheronizer equipped with WIP system, i.e. wash in place nozzle and system. Integrated plate lifting device for twin spheronizer plates. Stainless steel 316 GMP design with high polish finish. Standard Cone extruder with feed hopper. (other extruders can be fitted as optional if desired by customer / product suitability. Variable speed for extruder (20-100 rpm), twin spheronizer (50-1500 rpm). Standard set-up 1mm, optional size of cone meshes (0.4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.2mm). Twin bucket assembly with Load cell measurement for exact spheronization volume per batch. Twin Drum diameter standard 500 / 700 / 900 mm depending on the size of extruder and throughput. Standard chequered plate : 3.2mm. Recording of critical process data in software. Controls by 12.1� IPC by a touch panel control with trends. (21 CFR part 11 certified). Report on Excel file can be exported to USB to view on computer.
OPTIONAL FEATURES : Radial extrusion machine with various mesh size (0.3 / 0.4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.2 / special size) or other type of extruder desired. Continuous monitoring camera for spheronization process, measuring the roundness, size and sphericity of the spheres. Teflon coated drum, Various sizes of chequered plate (1mm / 2mm / 3.2mm / 6.5mm). Jacketed / Insulated extrusion chamber and Spheronizer drums for temperature / heat sensitive applications.
THROUGHPUT / OUTPUT : Model
UICE - LAB
UICE - 20 (SPH-380)
UICE - 41 (Twin SPH-500)
UICE - 101 (Twin SPH-700)
UICE - 250 (Twin SPH-900)
Capacity
20 - 1000 gms/hr
5 - 15 kgs/hr
30 - 50 kgs/hr
80 - 100 kgs/hr
250 - 300 kgs/hr
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Axial Extruder Axial extruder is the new extrusion range that builds on the proven Umang technology and its benefits. Similar design of process screws, cams and meshes ensure right size of extrusion from 300 - 1500 microns.
STANDARD FEATURES : Standard Axial extruder with NON SPILL type GMP feeder and hopper with safety grill. Various mesh configuration with different perforation area / thickness for product suitability. System components easily accessible for cleaning and maintenance. Fully integrated with Allen Bradley controls & touch screen. Standard set up with 1mm mesh. Variable speed of extruder (20-100 rpm). Stainless steel 316 GMP design with high polish finish.
OPTIONAL FEATURES : Axial extrusion head with various mesh size (0.3 / 0.4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.2 / special size). Jacketed / insulated extrusion chamber.
THROUGHPUT / OUTPUT : Model
USSE - 60
UTSE - 70
UTSE - 110
UTSE - 140
Capacity
1 - 10 kgs/hr
20 - 60 kgs/hr
80 - 150 kgs/hr
200 - 400 kgs/hr
Cone Extruder Cone extruder is the new extrusion range that builds on the proven Umang technology and its benefits. Similar design of process screws, cams and meshes ensure right size of extrusion from 500 - 1500 microns.
STANDARD FEATURES : Standard Cone extruder with NON SPILL type GMP feeder and hopper with safety grill. Various mesh configuration with different perforation area for product suitability. System components easily accessible for cleaning and maintenance. Fully integrated with Allen Bradley controls & touch screen. Standard set up with 1mm mesh. Variable speed of extruder (20-100 rpm). Stainless steel 316 GMP design with high polish finish.
OPTIONAL FEATURES : Cone extrusion head with various mesh size (0.5 / 0.6 / 0.8 / 1.0 / 1.2 mm / special size). Jacketed / insulated extrusion chamber.
THROUGHPUT / OUTPUT : Model
USSE - 60
UTSE - 70
UTSE - 110
UTSE - 140
Capacity
1 - 10 kgs/hr
20 - 60 kgs/hr
80 - 150 kgs/hr
200 - 400 kgs/hr
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Radial Extruder Radial extruder is the new extrusion range that builds on the proven Umang technology and its benefits. Similar design of process screws, cams and meshes ensure right size of extrusion from 400 - 1500 microns. The design ensures low pressure extrusion for your products.
STANDARD FEATURES : Standard Radial extruder with with NON SPILL type GMP feeder and hopper with safety grill. Various mesh configuration with different perforation area / thickness for product suitability. System components easily accessible for cleaning and maintenance. Fully integrated with Allen Bradley controls & touch screen. Standard set up with 1mm mesh. Variable speed of extruder (20 - 100 rpm). Stainless steel 316 GMP design with high polish finish.
OPTIONAL FEATURES : Radial extrusion head with various mesh size (0.3 / 0.4 / 0.5 / 0.6 / 0.8 / 1.0 / 1.2 mm / special size). Jacketed / insulated extrusion chamber.
THROUGHPUT / OUTPUT : Model
USSE - 60
UTSE - 70
UTSE - 110
UTSE - 140
Capacity
1 - 10 kgs/hr
20 - 60 kgs/hr
80 - 150 kgs/hr
200 - 400 kgs/hr
Die Roller Extruder Die roller extruder is the oldest extruder range that builds on the proven Umang technology and its benefits. We have a die roller and a pressing roller called as the knurling roller, the variety of designs ensures that process chosen for the product and process suits it application like high pressure extrusion.
STANDARD FEATURES : Standard Die roller extruder with NON SPILL type GMP feeder and hopper with safety grill. Various mesh configuration with different perforation area / thickness for product suitability. System components easily accessible for cleaning and maintenance. Fully integrated with Allen Bradley controls & touch screen. Standard set up with 1mm Die roller. Variable speed of extruder (20-100 rpm). Stainless steel 316 GMP design with high polish finish.
OPTIONAL FEATURES : Various sizes of Die roller (1.0 / 1.2 / 1.5 / 2.0 / 3.0 / 5.0 / 7.5mm / special size). Jacketed / insulated extrusion chamber. Chilled water through knurling roller.
THROUGHPUT / OUTPUT : Model
UDRE - 65
UDRE - 100
UDRE - 130
UDRE - 200
Capacity
0.1 - 15 kgs/hr
60 - 100 kgs/hr
200 - 300 kgs/hr
350 - 500 kgs/hr
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Basket Extruder Basket extruder is the new extruder range that builds on the proven Umang technology and its benefits. Similar design of Pressing blades and meshes ensures that process and validation so there is no difference to the extrusion from machine to machine. This design is the lowest extrusion pressure for your product.
STANDARD FEATURES : Standard meshes from 500 - 1500 microns. Bottom driven Blades and cams rotating in counter directions. System components easily accessible for cleaning and maintenance. External blade for pushing the material out to a spheronizer or a fluid bed dryer bowl. Variable speed of extruder (20 - 100 rpm). Standard set up 1mm mesh. Fully integrated with Allen Bradley controls & touch screen.
OPTIONAL FEATURES : Scrapping attachment for extrudes to be collected at one exit point. Extrusion various mesh size (0.5 / 0.6 / 0.8 / 1.0 / 1.2 / special size).
THROUGHPUT / OUTPUT : Model
UBRE - 75
UTSE - 150
UBRE - 300
UBRE - 450
UBRE - 600
Capacity
1 - 5 kgs/hr
10 - 30 kgs/hr
100 - 150 kgs/hr
300 - 500 kgs/hr
1000 - 1200 kgs/hr
Mixer Extruder Mixer extruder is the unique technology extruder range that builds on the proven Umang technology and its benefits. the machine has rotating sigma blades above and a screw cone extruder below, the blades and screw are carefully coordinated so that solvent based product extrusion can be done in this design due to its unique design.
STANDARD FEATURES : Explosion proof design. System components easily accessible for cleaning and maintenance. 21 CFR part 11 certified controls and measurement of critical parameters. ADVANCE PROCESS + for easy and automated plant control. Jacketed / insulated bowl. Variable speed for screw extruder and Variable speed for twin blade mixers.
OPTIONAL FEATURES : Various size of cone mesh size (0.5 / 0.6 / 0.8 / 1.0 / 1.2 mm / special size) Torque and pressure measurement while extrusion. WIP / CIP of entire system.
THROUGHPUT / OUTPUT : Model
UCKM - 30
UCKM - 110
UCKM - 150
UCKM - 300
Capacity
1 - 5 kgs/hr
30 - 70 kgs/hr
100 - 150 kgs/hr
300 - 400 kgs/hr
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Hot Melt Extrusion Hot Melt Extrusion is the new mixer extrusion range that builds on the proven Umang technology and its benefits. Similar design of the twin screws, extrusion die and cutting mechanism in the process and validation, Complete process and product controls are achieved during processing.
STANDARD FEATURES : Twin segmented screws and barrels with heating and cooling arrangement till 145 deg. cen. No seals in direct contact with the product / materials. Perfect GMP- design: smooth covering, no external tubing and piping allowing easy cleaning. Twin screw feeder (variable speed), Twin segmented screws (split barrel) with variable speed. Controls by touch screen 12.1� IPC by a touch panel control with trends (21 CFR Part 11). Down stream equipments like cutter and underwater are supplied as per project needs.
OPTIONAL FEATURES : Hot and chilled water equipments as per product / customer needs. Down stream equipments as per customer / project needs.
THROUGHPUT / OUTPUT : Model
UHME - 16
UHME- 25
UHME - 40
UHME - 50
UHME - 60
Capacity
0.05 - 2 kgs/hr
1 - 5 kgs/hr
10 - 40 kgs/hr
80 - 100 kgs/hr
150 - 200 kgs/hr
Spherodizer Spheronizer is the new pelletization range that builds on the proven Umang technology and its benefits. The design of the plate and the gap between the bowl and the chequered plate ensures that process and validation from equipment to equipment, our design ensures 300 micron pellets to be made on our spheronizer.
STANDARD FEATURES : Spheronizer with 3.2mm chequered plate and acrylic cover over drum. Plate and shaft seals not in direct contact with the product. Perfect GMP- design: smooth covering, no external tubing and piping allowing easy cleaning. Completely integrated full opening side discharge: perfect discharge of difficult products. Controls by touch screen 12.1� IPC by a touch panel control with trends (21 CFR Part 11). Recording of critical parameters and process data in software.
OPTIONAL FEATURES : Jacketed drums for processing temperature sensitive materials. Various sizes of Chequered plate (1 / 2 / 3.2 / 6.5mm / special sizes).
THROUGHPUT / OUTPUT : Model
USPH - 250
USPH - 380
USPH - 500
USPH - 700
USPH - 900
Capacity
0.2 - 1 kg/batch
1 - 3 kgs/batch
3 - 7 kgs/hr
5 - 15 kgs/batch
20 - 40 kgs/hr
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Solid Drug Layering Drug layering is the new pelletization range that builds on the proven Umang technology and its operational benefits. Similar design of loss in weight twin screw feeder, rotating plate and spray gun for liquid ensures that process and validation scalability from a laboratory scale to a production scale. This unique design of twin screw feeder, plate and spray nozzle makes the not only a perfect drug layering machine but also an ideal machine suited for fast pelletization. Powder loading from 10 - 600% is possible using this technique of pelletization. Our unique sensors assure the product to be layered without touching the product during operation. Minimum size of pellets which can be layered is 300 microns and above.
STANDARD FEATURES : Compact design suitable for GMP suites for continuous powder loading pelletization. Fully integrated with Allen Bradley PLC controls and 12.1� IPC (21 CFR Part 11 certified). Perfect cGMP - design: smooth covering, No external tubing and piping allowing easy cleaning. Integrated plate lifting device for drug layering plates. Through the wall installation: minimum space required in GMP area. Variable speed for drug layering plate & Load cell based Twin screw feeder. Cyclone assembly for capturing the dust and blower assembly for blowing air. Two nozzles one for powder and other for liquid spraying. Stainless steel 316 GMP design with high polish mirror inside finish. High resistive meter for sensing automatic powder or liquid spray for automatic drug loading.
THROUGHPUT / OUTPUT : Model
USDL - 250
USDL - 380
USDL - 700
USDL - 1080
USDL - 1300
Capacity
100 - 800 gms/batch
2 - 3 kgs/batch
20 - 30 kgs/batch
50 - 75 kgs/batch
100 - 150 kgs/batch
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Fluid Bed Coater Fluid Bed Coating is the new FAST COATING WURSTER range that builds on the proven Umang technology and its benefits. The design of inline removable nozzles, and continuous working air purging filters makes it a unique bottom spray coating machine. This unique design of the distribution plate and nozzles make it a ideal machine for fast and uniform coating application on Mico pellets, Pellets, Granules & Tablets.
STANDARD FEATURES : Liquid dosing peristaltic pump by speed & volume, load cell based controls. FAST COATING (FS) distribution plate for wurster coating with in-process removable nozzles. Perfect cGMP - design: smooth covering, no external tubing and piping allowing easy cleaning. Continuous working filters with pneumatic air purging arrangement. Through the wall installation: minimum space required in GMP area. Flexibility (processes and products) for spheronization or pellet line / pelletization process. Fully integrated with Allen Bradley PLC controls and 12.1� IPC (21 CFR Part 11 certified). Critical process data recording like temperature, airflow, humidity, pressure drop, etc. 2 bar and optional 10 / 12 bar designs available. Organic solvent processing with flame proof components available as optional supply.
THROUGHPUT / OUTPUT : Model
UFBM - 1
UFBM - 3 / 5
UFBM - 15 / 30
UFBM - 60
UFBM - 120 (3 wurster)
UFBM - 300 (5 wurster)
Capacity
0.5-1 kgs/batch
2-5 kgs/batch
10 - 30 kgs/batch
40 - 75 kgs/batch
120 - 250 kgs/batch
200 - 450 kgs/batch
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Fluid Bed Coater Fluid Bed Rotor is the new mixer range that builds on the proven Umang technology and its benefits. Similar design of process bowl, mixer and chopper ensures that process and validation wise there is no difference to the mixing process. This unique design of process bowl, mixer and chopper makes the not only a perfect wet granulator but also an ideal machine. The outstanding feature of the Fluid Bed Rotor range is the integrated and CIP optimized design. Connections, cabling and supplies are completely integrated, covered and sealed so the outside of the machine is smooth and very easy to clean. The innovative discharge valve design and optimized seals inside the bowl allow for CIP. As a result of this the our Fluid Bed Rotor is highly flexible, quick product changeover increases productivity and cost effectiveness. The Fluid Bed Rotor ranges from 5 to 1200 liters featuring through the wall design and movable head, allowing operation with platform and dust-free discharging via a linked mill directly into an IBC. The Fluid Bed Rotor can be stand-alone or linked to a fluid bed to form an integrated system.
STANDARD FEATURES : Liquid dosing peristaltic pump by speed & volume, load cell based controls. FAST COATING (FS) distribution plate for wurster coating with in-process removable nozzles. Perfect cGMP - design: smooth covering, no external tubing and piping allowing easy cleaning. Continuous working filters with pneumatic air purging arrangement. Through the wall installation: minimum space required in GMP area. Flexibility (processes and products) for spheronization or pellet line / pelletization process. Fully integrated with Allen Bradley PLC controls and 12.1� IPC (21 CFR Part 11 certified). Critical process data recording like temperature, airflow, humidity, pressure drop, etc. 2 bar and optional 10 / 12 bar designs available. Organic solvent processing with flame proof components available as optional supply.
THROUGHPUT / OUTPUT : Model
UFBM - 1
UFBM - 3 / 5
UFBM - 15 / 30
UFBM - 60
UFBM - 120 (3 wurster)
UFBM - 300 (5 wurster)
Capacity
0.5-1 kgs/batch
2-5 kgs/batch
10 - 30 kgs/batch
40 - 75 kgs/batch
120 - 250 kgs/batch
200 - 450 kgs/batch
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Mouth Dissolving Film
STANDARD FEATURES : Complete integration from one source. Mixing, Homogenization, Film line, Packing line. Web length 490mm. Coating thickness from 40 - 1000 microns wet. High Coating accuracy from design. Individual temperature adjustment zones. Recording of all process related parameters. Left machinery compartment containing coating system. Variable speed of base film. Uniform air flow throughout the machine. High quality stainless steel 316 construction with high quality finish. Stainless steel 304 rest contact parts. Liquid dosing system. Thickness checking or wet & dry film. Product temperatures & film temperature measurement. Recording of critical process data in 21 CFR part 11 certified software. Controls by Allen Bradley and 12.1� IPC by a touch panel control with trends. Report on Excel file can be exported to USB to view on computer. Equipment can be modified to make patch film of desired size and desired web length. Cutting and Slitting line are a part of the complete processing line for oral strips.
OPTIONAL FEATURES : Cutting line for cutting into small uniform strips & individual strip packing line. Homogenizers and mixing tanks for integrations for a complete MDF suite. Drying tunnel length can be varied. Humidity control for the drying chamber.
THROUGHPUT / OUTPUT : Model
UMDF - LAB
UMDF - 25
UMDF - 50
UMDF - 100
UMDF - 200
Capacity
25 strips/min
20,000 strips/day
50,000 strips/day
100,000 strips/day
200,000 strips/day
Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Packing Line For Oral Film
STANDARD FEATURES : Complete integration from one source. Mixing, Homogenization, Film line, Packing line. Unwind roll from backing film & lid film unwinding station. Cut strips into precise length. Weight strips to ensure proper dosing. Detect splices in sachet materials. Lot number & batch code, expiry date printing on sachets. Character recognition of lot number and expiry date. Character recognition or bar code recognition of sachet part number. Product loading and Sealing station. Thickness detection / presence of film in sachet. Cut tear notch in sachet. Reject improperly sealed pouches. One line Collator. Recording of all main parameters. Balcony construction, easy to access, load and unload film from packing material from front side. Ease to set and operate the packing line with quick and minimum tool changeover. Multi-track operations from 2 to 4 line ups. Automatic, synchronized pick-n-place mechanism for feeding of strips. High quality stainless steel 304 construction with high quality finish. Recording of critical process data in 21 CFR part 11 certified software. Controls by Allen Bradley and 12.1� IPC by a touch panel control with trends. Report on Excel file can be exported to USB to view on computer.
OPTIONAL FEATURES : Cutting line for cutting into small uniform strips & individual strip packing line. Homogenizers and mixing tanks for integrations for a complete MDF suite. Customer required designs and style / colors for printing. Special style / shape for packing each film / multiple films. Disclaimer : This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and uses. The application, use and processing our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility.
Umang was incepted in the year 1982, with an objective to serve the clients with all kinds of equipments and accessories under one roof. Within a very short span of time, we succeeded to be the most reliable brand name in the market supplying equipments and solutions to the Pharmaceutical industry for Pelletization and granulation solutions. In 2007, the company ventured into solutions for Personal care industry majorly focusing on Oral care products, giving encapsulated ingredients for cooling applications. In 2009, the company further integrated it self to give solutions for Bakery and food applications like Chewing gum, mouth dissolving films etc. Today the company has three major divisions : Personal care, Bakery and food ingredients, Pharmaceutical division for innovative dosage form development. “Sprinkles N More” brand started in 2011 for complete retail solutions for bakery decoration / coloring solutions.
Pelletization & Edible Film
Concept Range
Complete engineering equipment solutions like Pelletization : Extrusion, spheronization, layering, Granulation, Fluid bed Coating, drying and Edible film line for innovative dosage form.
Laboratory range of equipment solutions like Pan coating, Spherericity checking, Laboratory edible film line, High shear mixers / Homogenizers, Extrusion & Spheronization, etc.
Websites: www.umangpharmatech.com www.umangengineering.com www.extruderspheronizer.com
Websites: www.concept-machines.com www.coating-machines.com
Personal Care & Home Care
Bakery & Food Decoration
Encapsulation of oils, fragrance, flavors, actives, extracts, vitamins, etc. & Visual effects for all kinds of Home & personal care products, with customization as per customer needs.
Bakery decoration products like Luster/ disco/ edible dust, edible glitter, Sparkling jimmies / pearls/ sugars, etc. for all kinds of Backing / Ice cream decoration needs in bulk / retail packs.
Websites: www.umangpharma.com www.cosmeticbeads.com
Websites: www.umangpharma.com www.edibleglitters.com www.ediblefilm.co.uk
Innovative Pharmaceutical Delivery Systems
Neutral Pellets & Coating Polymers
Encapsulation solutions for Pharma industry, technology like SR, IR, Pulsed, Edible films, etc., with customization as per customer needs & out licensing of products with/without equipment's.
Complete range of Sugar / MCC / Tartric acid / Lactose / Manitol / Starch / Calcium carbonate pellets / beads & Acrylic coating polymers for Pharmaceutical coating like L-30D, L-100 & E-100.
Websites: www.umangpharmaceuticals.com www.pharmaceuticalpellets.com www.pharma-spheres.com
Websites: www.umangpharmaceuticals.com www.micro-pellets.com www.pharma-spheres.com
Umang Pharmatech Pvt. Ltd.
A truly global organization...
Survey No. 146, H. No.1 (PT), Vasai Phata Highway Junction, Pelhar, Nh8, Vasai (E) - 401 208, Maharashtra (India). Tel. : (+91-22) 30018900 / 30018915 - 98 Mob. : (+91) 986 723 6594 Fax : (+91-22) 30018908 / 30018913 E-mail : umang@umangpharmatech.com
© 2012. All rights reserved.