Unidrain productcatalogue 2016 UK by unidrain®

P R O D U CT CATA LO G U E | U K

INTRODUCTION

CONSTRUCTION 10 MOUNTING PRINCIPLE | SHOWERLINE 12 SOLUTIONS

DRAIN UNIT | LINE | WALL

MOUNTING SET | WALL | FLOOR

MOUNTING ELEMENT | WALL

DRAIN UNIT | CORNER | WALL

OUTLET UNITS

OUTLET UNIT | LINE

OUTLET UNIT | CORNER

ACCESSORIES | LINE

ACCESSORIES | CORNER

CLASSICLINE FRAME | WALL

CLASSICLINE GRATING

CLASSICLINE SOAP SHELF

HIGHLINE PANEL | CORNER

HIGHLINE FRAME | LINE | WALL

HIGHLINE PANEL | LINE

HIGHLINE CASSETTE | LINE

HIGHLINE CUSTOM | LINE

HIGHLINE CUSTOM | MOUNTING

SHOWERLINE | FIXED MODULE SHOWERLINE | FLEXIBLE MODULE

GLASSLINE | SHOWER BASE

GLASSLINE | SHOWER SCREENS

GLASSLINE | SHOWER DOOR

GLASSLINE | TOP RAILS

MODULE 1100

FLEX FRAMES

FREESTANDING SYSTEM

DRAIN UNIT | LINE | FLOOR

CLASSICLINE FRAME | FLOOR

MATLINE

WORLD CLASS DANISH DESIGN In 2003 unidrain® was the first company in the world to develop a line drain to be placed against the wall in the shower cubicle. Back then, high-end floor drain design was a new and revolutionary concept. In just a few years, unidrain® developed into one of the leading floor drain manufacturers. Ten years later, unidrain® has won many international design awards and be represented in over 30 countries around the world.

VA 2.42/19872

for HighLine

GLASSLINE & SHOWERLINE

Shower screen and floor drain unidrain® GlassLine is a range of shower screens designed as a natural extension of the original unidrain® floor drain. Using a uniqueflange system, the shower screen is simply and securely installed in the floor and walland represents a complete concept together with the unidrain® floor drain. The GlassLine shower screen can be installed in two ways: The fixed module embraces the entire shower cubicle with an integrated drain unit. The flexible module can be installed on a regular drain unit. Both solutions can be combined with outlet unit,

FLOOR DRAINS

unidrain®’s floor drains are an intelligent and functional solution. The system is composed of drain unit, outlet unit, frame and grating/panel, and are available in both line and corner solutions. The two design ranges, ClassicLine and HighLine, each offer clean lines and streamlined design and constitute the top, visible part of the floor drain. The installation of the drain unit and the outlet unit is the same for both ranges.

Bedre Bad ©

frame, grating/panel and shower screen.

the unidrain® principle Combining the products is very simple. With just a few choices, you can select a solution that suits your bathroom.

FIXED MODULE

FLEXIBLE MODULE

A: Grating or panel B: Frame D: Outlet unit E: Fixed module F: Shower screen

A: Grating or panel B: Frame C: Drain unit D: Outlet unit E: Flexible module F: Shower screen

B C

D F

UNIDRAIN® LINE

UNIDRAIN® CORNER

A: Grating or panel B: Frame C: Drain unit D: Outlet unit

A: Grating or panell B: Frame C: Drain unit D: Outlet unit

A A B

ClassicLine

CLASSICLINE ClassicLine is the original design range from unidrain® and consists of frame and grating. A selection of elegant and timeless grating designs in brushed stainless steel ensures that there is a product to suit all tastes.

WORTH KNOWING • The drain unit and outlet unit are the same for both ClassicLine and HighLine • The frame is mandatory, as the grating is supported by the frame

Design for floor drains The top, visible part of the floor drain is available in two design ranges: ClassicLine and HighLine.

HighLine

HIGHLINE In the HighLine range, the traditional grating is replaced by a panel available in three solutions: - Panel is a brushed stainless steel or frosted glass solution - Custom is a flat base on top of which you lay your choice of floor tile - Cassette is a base with wall/floor junctions all the way around, making it suitable for flooring such as terrazzo (using own material).

HighLine

WORTH KNOWING â&#x20AC;˘ The drain unit and outlet unit are the same for both ClassicLine and HighLine â&#x20AC;˘ The frame is optional and can be omitted, leaving just a narrow slit in the floor to allow water to drain away

CONSTRUCTION

unidrain® is placed directly against the rear wall. The vertical wall flanges are fixed to the wall and ensure a completely waterproof overlap with the membrane. Similarly, the horizontal floor flanges ensure the floor is waterproof by overlapping the floor membrane.

Wall membrane

Reinforcement

Wall flange

Floor membrane Floor flange

Reinforcement

FOR ALL TYPES OF STRUCTURES unidrain® is tested and approved for internal fitting with all types of floor structures for wet rooms with tiles, heavy concrete structures and lightweight wooden floor joists. For mounting in wooden floor joists and other lightweight floor constructions,

CONCRETE

WOODEN FLOOR JOISTS

we recommend using the unidrain® Mounting Set (see page 19). For all structures, the materials and building methods used must be suited to and approved for use in a wet room. Detailed building guidelines can be downloaded from www.unidrain.com

In-situ concrete on a stable poured

Wooden floor joists with 22 mm

foundation with a base made from

floor plate (plywood or similar).

concrete or other suitable base

Waterproofing system such as

material. Lubrication membrane with sealing tape/reinforcement tape. Tile/tiled brick flooring.

lubrication membrane with sealing tape/ reinforcement tape. Tile/tiled brick flooring. Shown with Mounting Set 22 mm (see page 19).

unidrain®’s unique construction is patented in Europe (no. 1287213) and awaiting patent approval in a number of countries worldwide. unidrain® is a registered trademark.

RELIABLE RESULT Because unidrain® is placed against the wall, it only requires a single-sided slope as opposed to the traditional four-sided incline. It is thus easier to produce a correct base without the risk of depressions or reverse slope. The result is a completely level floor surface. This makes

it easier to lay large tiles that do not require cutting around the drain. The end result is both waterproof and reliable.

BUILDING METHOD 1. SIMPLE AND PRECISE FITTING AND MOUNTING Simple and easy mounting with precise fitting ensures

correct placement during the entire building process 2. FIXATION DURING POURING The drain unit is fixed throughout the entire pouring process, ensuring it does not move. Placement against the wall, away from the work area, eases the task of reinforcement and floor heating. 3. EASY PRODUCTION OF A BASE WITH ONE-SIDED SLOPE

A one-sided base makes it easier to produce a correct base without the risk of reverse slope and depressions. The base for the tiled surface is thus completely even and smooth. 4. WET ROOM SECURE CONNECTION WITH WALL AND FLOOR The overlap of the membrane with the floor and wall flanges of the drain forms a waterproof and wet room secure seal with the floor and wall. 5. EASY TILE FITTING ON A TOTALLY FLAT SURFACE The one-sided slope makes tile laying even easier, even with very large tiles. It is not necessary to cut the tiles to fit around the drain.

EN 1253 EN 1253 (European Standard for floor drains)

MOUNTING PRINCIPLE UNIDRAIN® GLASSLINE

Reinforcement

Wall membrane

Reinforcement Wall profile Fixed module

Reinforcement

Fixed module

Reinforcement

Floor membrane

CONSTRUCTION TWO MODELS GlassLine construction is available in two types: the fixed and the flexible module. The fixed module is a natural extension of the original design of the floor drain.

FIXED MODULE

FLEXIBLE MODULE

WORTH KNOWING

• Can be combined with both

• C an be combined with both

ClassicLine and HighLine (with frame)

• The drain unit is a part of the

• C an be installed with HighLine

for mounting the shower screen.

fixed module

Custom without frame

The flexible module is a separate

• Can be combined with outlet unit,

• C an be combined with drain unit,

frame, grating/panel and shower

outlet unit, frame, grating/panel and

screen from the permanent range

shower screen from the permanent

The fixed module consists of two welded profiles placed perpendicularly on the drain unit: One is for mounting on the side wall and the other is used

profile, which is attached and fastened to the existing drain units with bolts. The shower screen is then mounted.

range

WHAT MAKES GLASSLINE UNIQUE - Patented system: A single complete solution for the bathroom - Secure watertight covering of the entire shower cubicle - Quick and easy installation - Defines the slope in the shower cubicle - No visible fittings or screws - Glass surfaces are treated with Cleantec for easier maintenance - Easy to install with underfloor heating

INSTALLATION PRINCIPLE unidrain®’s patented flange system is extended to the installation of the shower screen, making GlassLine the strongest and most wet room secure installation ever for shower cubicles. The fixed/flexible module is fitted to the wall and embedded firmly into the floor. When the floor is poured, it follows the two % slope WORTH KNOWING • The shower screen can be installed either before or after tile fitting • The shower screen is mounted on a rail on the wall and can be replaced in case of damage

in the shower cubicle to make the pouring process easier than ever before, and decreases the risk of depressions or reverse slope. The wall profile is fixed to the rear wall and the shower screen is attached to the profile as well as inserted into the track in the fixed/flexible module. Wall and floor flanges ensure a 100 % waterproof solution and the tiles elegantly conceal the strong underlying installation. The shower screen is now firmly attached to both the wall and floor, eliminating the risk of loosening over time.

SOLUTIONS

Install unidrain® in the corner or let it follow the corners. Place unidrain® along a wall, in a sunken shower cubicle or quite simply wherever there is a need for it. The illustrations show examples of simple and functional shower cubicles that are possible using unidrain®’s unique floor drain system.

Line solution:

1004 in an open bathroom

1004 in sunken niche in open bathroom.

Corner solution:

Module solution:

2011 in sunken corner niche.

1100 wall-to-wall in larger bathroom.

Line solution:

1001 in niche with three solid walls.

5002 with right aligned shower screen.

Module solution:

1100 in larger niche with three solid walls.

1100 in inward corner.

D R A I N U N I T | L I N E | WA L L

LINE 1001

LINE 1002

For shower cubicle with three solid walls.

For shower cubicle with open right side, glass wall or

The drain unit has three wall flanges and one floor flange.

similar. The drain unit has two wall flanges and two floor flanges.

1001

1002

Line drain

Rear wall/left/right

Rear wall/left

Usage: Wall flange:

700*

800*

900*

1000*

1200*

700*

800*

900*

1000*

1200*

*Installation length (L):

702 mm

802 mm

902 mm

1,002 mm

1,202 mm

757 mm

857 mm

957 mm

1,057 mm

1,257 mm

Frame (R):

695 mm

795 mm

895 mm

995 mm

1,195 mm

695 mm

795 mm

895 mm

995 mm

1,195 mm

Center (C):

351 mm

401 mm

451 mm

501 mm

601 mm

351 mm

401 mm

451 mm

501 mm

601 mm

Height (H):

17 mm

18 mm

19 mm

20 mm

22 mm

17 mm

18 mm

19 mm

20 mm

22 mm

Item no.:

1001.0700

1001.0800

1001.0900

1001.1000

1001.1200

1002.0700

1002.0800

1002.0900

1002.1000

1002.1200

EAN no.*:

3030

3047

3054

3061

3078

3085

3092

3108

3115

3122

Length model:

*570769200xxxx

(L)

150

(L)

(C)

H 48

NOTE! Total construction height (excl. frame/grating) = height of the outlet unit + (H). (H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.

(C)

(H) 71

103

57 57

(R)

(H)

(L)

150

(R)

103 86

150

(C)

Specifications Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes. Floor construction: All Flooring: Tiles/tile bricks

LINE 1003

*Please note fitting dimensions!

ClassicLine

HighLine

LINE 1004

For shower cubicle with open left side, glass wall or

Can be freely positioned against rear wall, independent of any side

similar.

walls.

The drain unit has two wall flanges and two floor flanges

The drain unit has one wall flange and three floor flanges.

1004

1003

Line drain

Rear wall/right

Rear wall

700*

800*

900*

1000*

1200*

300*

700*

800*

900*

1000*

1200*

757 mm

857 mm

957 mm

1,057 mm

1,257 mm

432 mm

812 mm

912 mm

1,012 mm

1,112 mm

1,312 mm

695 mm

795 mm

895 mm

995 mm

1,195 mm

315 mm

695 mm

795 mm

895 mm

995 mm

1,195 mm

351 mm

401 mm

451 mm

501 mm

601 mm

216 mm

406 mm

456 mm

506 mm

556 mm

656 mm

17 mm

18 mm

19 mm

20 mm

22 mm

12 mm

17 mm

18 mm

19 mm

20 mm

22 mm

1003.0700

1003.0800

1003.0900

1003.1000

1003.1200

1004.0300

1004.0700

1004.0800

1004.0900

1004.1000

1004.1200

3139

3146

3153

3160

3177

3238

3184

3191

3207

3214

3221

(L)

80 10

150

(C)

150

(L)

(L) (R)

(C)

NOTE! Total construction height (excl. frame/grating) = height of the outlet unit + (H). (H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.

150

(H) 71

103 85

(H)

150

(R)

103 86

(C)

Specifications

D R A I N U N I T | L I N E | WA L L

Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes. Floor construction: All Flooring: Tiles/tile bricks

LINE 1004

ClassicLine

*Please note fitting dimensions!

LINE 1004

With side drain on right

With side drain on left.

Can be freely positioned against rear wall, independent

of any side walls. Only for use with ClassicLine.

1004

Usage:

Line drain

Wall flange:

Rear wall

700*

800*

900*

1000*

1200*

700*

800*

900*

1000*

1200*

*Installation length (L):

812 mm

912 mm

1012 mm

1112 mm

1312 mm

812 mm

912 mm

1012 mm

1112 mm

1312 mm

Frame (R):

695 mm

795 mm

895 mm

995 mm

1195 mm

695 mm

795 mm

895 mm

995 mm

1195 mm

Center (C):

406 mm

456 mm

506 mm

556 mm

656 mm

406 mm

456 mm

506 mm

556 mm

656 mm

Height (H):

28 mm

Item no.:

1004.0705

1004.0805

1004.0905

1004.1005

1004.1205

1004.0706

1004.0806

1004.0906

1004.1006

1004.1206

EAN no.*:

9216

9223

9230

9247

9254

9261

9278

9285

9292

9308

Length model:

*570769200xxxx

(L)

80 10

150

(C)

(L)

54 71

57 103 86

)H(

48 (C)

185

NOTE! Total construction height (excl. frame/grating) = height of the outlet unit + (H). (H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.

(C)

(H)

(R)

150

103 86

(R)

M O U N T I N G S E T | WA L L | F L O O R M O U N T I N G E L E M E N T | WA L L

MOUNTING SET 22 MM

MOUNTING ELEMENT

Line | wall

Corner | wall

Line | floor

Line | wall

300-1000 mm

1,200 mm

200 mm

300-900 mm

100 mm

135 mm

The set consists of a front, back and side profile(s) that are mounted into

Easier mounting with prefabricated

wooden joists using screws. The drain unit is inserted into the profile and

polystyrene sheets.

”clicked” in place.

Can be cut to size and adapted to fit

Ensures correct placement and fitting of drain unit in wooden floor joist

all model lengths.

construction. It is customised to various lengths by cutting the front and back profile.

Usage: Fits length model: Materials:

Line drain | wall

Corner drain | wall

Line drain | floor

Line drain

300-1000

1200

200

300-900

300-1200

EPS

Stainless steel/wood Stainless steel/wood Stainless steel/wood Stainless steel/wood Pickled/wood

Pickled/wood

1001.0300-1000 1002.0300-1000 1003.0300-1000 1004.0300-1000

1001.1200 1002.1200 1003.1200 1004.1200

2011.0200

3002.0700-0900 3004.0300-0900

Item no.:

1804.1022

1804.1222

2801.0222

EAN no.*:

3597

3603

4136

Surface: Fits:

Fibreglass-reinforced Fibreglass-reinforced mortar surface mortar surface All line drain units

All line drain units

| wall

3804.0922

1860.0100

1860.0135

6574

6406

6413

*570769200xxxx

unidrain® with ClassicLine frame/grating and Mounting Set 22 mm | wall.

unidrain® with ClassicLine frame/grating and Mounting Element 135 mm.

Specifications

D R A I N U N I T | C O R N E R | WA L L ClassicLine

HighLine

CORNER 2011

The drain unit has two wall flanges and one floor flange. Shower cubicle with corner drain

2011

Corner drain

Usage:

Two rear walls

Wall flange

200

Length model: Length (L):

L1: 377/L2: 267 mm

Frame (R):

270/193mm

Item no.:

2011.0200

EAN no.*:

6659

m 67

*570769200xxxx

L1 / 377 mm

NOTE! Total construction height (excl. frame/grating) = see page 32-34.

196

Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes. Floor construction: All Flooring: Tiles/tile bricks

OUTLE T UNIT | LINE

Extra low installation height: 52 mm

EExtra low installation height: 52 mm

LINE 1311.0032

Extra low installation height: 52 mm

LINE 1311.0050

LINJE 1417.0050

Horizontal outlet unit Ø 32 mm.

Horizontal outlet unit Ø 50 mm.

Excl. ordour barrier.

Includes built-in odour barrier with

Can be turned 180˚ if a backward

facing outlet is required.

high self-cleaning effect. The odour barrier can be removed and cleaned. Can be turned 180˚ if a backward facing outlet is required. Note: The odour barrier is VA approved.

Usage:

Line drain

Ø 32 mm

Ø 50 mm

Horizontal

0.85 218 l/s

218l/s 0.6

Without

With (odour barrier)

Outlet dimensions: Outlet direction:

218 0.4 l/s

Capacity: Water trap/odour barrier:

Without Without

Without

1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003

1311.0032

1311.0050

1417.0050

150 50 7908

50 7915

Side inlet:

Item no.:

EAN no.*:

7892

218

*570769200xxxx

150

218 80

218

218 (H)

150 50

122

150

(H) 52

50 30

D 50

50 38

122

(H)

132

D 50

218

D 50

50 38

D32

(H)

Fits:

132 45

NOTE! Total construction height (excl. tiles) = height of the outlet unit + (H). (H) = Distance from top edge of outlet unit to underside of tile. (See measurement specifications for the selected drain unit p. 16-17). The construction height indicated may vary by 3 mm due to manufacturing tolerances.

• LOWER INSTALLATION HEIGHT

Specifications

• LARGER CAPACITY

Materials: Plastic (PP)

• LOCK FIXTURE FOR DRAIN UNIT

Gasket: EPDM)

Extra low installation height: 50 mm

Extra low installation height: 140 mm

LINE 1312.0050

LINE 1312.0075

LINE 1850.0075

Vertical outlet unit Ø 50 mm.

Vertical outlet unit Ø 75 mm.

P-water trap Ø 75 mm.

Excl. ordour barrier.

High self-cleaning effect. P-water trap can be used instead of the built-in water trap/odour barrier that comes with some of the outlet units. Suitable for installation in frequently used showers.

Line drain

Ø 50 mm

Ø 75 mm

Vertical

Horizontal

1.7 l/s

218 2.5 l/s

1.7 l/s

218

Without

1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003

Outlet unit 1312.0075, 1412.0075, 1414.0075, 2412.0075

1312.0050

1312.0075

1850.0075

7922

7939

7946

150

80 150

218

218 (H)

(H) 80 96

75 150

91 180

150

140

190

(H)

218

218 (H)

(H)

260

58 75 75

66 91

OUTLE T UNIT | LINE

LINE 1411.0050

LINE 1415.0050

Horizontal outlet unit Ø 50 mm.

Incl. built-in water trap.

The water trap can be removed, separated and cleaned.

Can be turned 180˚ if a backward facing outlet is required

Can be turned 180˚ if a right or left facing outlet is required.

Line drain

Outlet dimensions:

Ø 50 mm

Outlet direction:

Horizontal

0.91 l/s

218 0.8 l/s

Water trap:

With

Side inlet:

Without

Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003

Item no.:

1411.0050

1415.0050

EAN no.*:

50 7960

Capacity:

218

Fits:

150 218

*570769200xxxx

Line drain

Usage:

8288

8 218

218 (H) 50

(H)

58 86

86 D50

45 132

150

150 80

80 218

(H)

D 50

(H)

45 132

• LOWER INSTALLATION HEIGHT

Specifications

• LARGER CAPACITY

Materials: Plastic (PP)

• LOCK FIXTURE FOR DRAIN UNIT

Gasket: EPDM

LINE 1411.0075

LINE 1412.0075

Horizontal outlet unit Ø 75 mm.

Vertical outlet unit Ø 75 mm.

Incl. built-in water trap.

The water trap can be removed, separated and cleaned.

Can be turned 180˚ if a backward facing outlet is required.

Line drain

Ø 75 mm

Horizontal

Vertical

1.0 l/s 218

1.5 l/s

With

218

Without

Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003

1411.0075

1412.0075 150

75 7977

150

7984

80 218

(H)

147

D75

218 (H)

80 218

75 45

150 140

150

80 218

(H)

147

(H)

45 140

17 86

OUTLE T UNIT | LINE

• LOWER INSTALLATION HEIGHT • LARGER CAPACITY • LOCK FIXTURE FOR DRAIN UNIT

LINE 1413.0075

LINE 1414.0075

Horizontal outlet unit Ø 75 mm.

Vertical outlet unit Ø 75 mm.

Incl. built-in water trap (can be separated and cleaned).

Note: The water trap has two function options:

- Place the water trap at the top so it is used only for the

floor drain.

- Push the water trap down into the outlet unit so that it

can also be used for the two upper side inlets.

The two lower inlets require a separate water trap. Can be

The two lower inlets require a separate water trap.

turned 180˚ if a backward facing outlet is required. Line drain

Line drain

Outlet dimensions:

Ø 75 mm

Outlet direction:

Horizontal

Vertical

1.5 l/s

1.85 l/s

Usage:

Capacity: Water trap:

With

218

Side inlet: Fits:

With 218

4 pcs. Ø 40 mm (can be opened if required)

Unit 1001, 1002, 1003, 1004, 1100, 3002, 3004, 5002, 5003

1413.0075

1414.0075

Item no.:

150

7991

EAN no.*:

8004

150

*570769200xxxx

218

80 218

54 119

178

243

150

D40

150

D75

140

178

119

218

D 80

80 142

218

89 178

119

D40 75

D40

D75

243

119

14040

218

142 45

NOTE! Total construction height (excl. tiles) = height of the outlet unit + (H). (H) = Distance from top edge of outlet unit to underside of tile. (See the measurement specifications for the selected drain unit). The construction height indicated may vary by 3 mm due to manufacturing tolerances.

OUTLE T UNIT | CORNER

Extra low installation height: 51 mm

CORNER 2311.0032

CORNER 2311.0050

Horizontal outlet Ø 32 mm.

Horizontal outlet Ø 50 mm.

Excl. ordour barrier.

Can be rotated 360˚, which may facilitate direction of

pipework.

Corner drain

Outlet dimensions

Ø 32 mm

Ø 50 mm

Outlet direction:

Horizontal

0.5 l/s

0.8 l/s

Water trap:

Without

Side inlet:

Without

Unit 2011.0200

Item no.:

2311.0032

2311.0050

EAN no.*:

6581

6598

Capacity:

Fits:

*570769200xxxx

D128 D128

51 51

D50 32 32

D32 D32

D128

D170 D170

51 51

Usage:

35 35

205 205

162

72 72

162 162

196

47 47

139

72 72

196 196

56 56

87 87

139 139

240

NOTE! (See the measurement specifications for the selected drain unit). The construction height indicated may vary by 3 mm due to manufacturing tolerances.

Specifications Materials: Plastic (PP) Gasket: EPDM

Extra low installation height: 51 mm

CORNER 2415.0032

CORNER 2415.0050

Horizontal outlet Ø 32 mm.

Horizontal outlet Ø 50 mm.

Includes built-in odour barrier with high self-cleaning

effect.

The odour barrier can be removed and cleaned.

Can be rotated 360˚, which may facilitate direction of

pipework.

Note: The odour barrier is VA approved.

Corner drain

Ø 32 mm

Ø 50 mm

Horizontal

0.4 l/s

0.5 l/s

With (odour barrier)

Without

Unit 2011.0200

2415.0032

2415.0050

6789

6796

D128

D20 D2

D50

32 32

D32

D128

51 51

D170

205

196

162

240

162

56 56

139

196

72 72

139

Specifications

OUTLE T UNIT | CORNER

Materials: Plastic (PP) Gasket: EPDM

CORNER 2411.0050

CORNER 2411.0075

CORNER 2412.0075

Horizontal outlet Ø 50 mm.

Horizontal outlet Ø 75 mm.

Vertical outlet Ø 75 mm.

Incl. built-in water trap (can be

separated and cleaned).

Can be rotated 360˚, which may

facilitate direction of pipework.

Corner drain

Outlet dimensions

Ø 50 mm

Ø 75 mm

Outlet direction:

Horizontal

Vertical

0.8 l/s

0.9 l/s

1.0 l/s

Water trap:

With

Side inlet:

Without

Unit 2011.0200

Item no.:

2411.0050

2411.0075

2412.0075

EAN no.*:

6604

6611

6628

D128

*570769200xxxx

D205

D128

106

162

196

139

D75

162

230

126

210

196

193

139

D128

D195

162

D128

99 126

D50

196

D75

126

87 162

139

D205

196

106

139

D128

139

126

D50

196

106

139

D128

D195

173

Fits:

193

Capacity:

106

Usage:

Front Opstalt/Front Elevati 35

210

230

Side Opstalt/Side Elevatio

NOTE! (See the measurement specifications for the selected drain unit). The construction height indicated may vary by 3 mm due to manufacturing tolerances.

ACCES SORIES | LINE

STRAINER

WATER TRAP

ODOUR BARRIER

1810.0010

1820.0040

1820.0010

1820.0030

Simplifies daily floor

Fits outlet units:

Plced between the drain

drain maintenance.

1411.0050/1411.0075/

1401.0050/1401.0075/

1311.0032/1311.0050/

unit and the outlet unit.

Prevents water trap

1412.0075/1413.0075/

1402.0075/05.0050/

1312.0050/1312.0075/

1414.0075/1415.0050

1403.0075/1404.0075

1417.0050

Suitable for very deep

Meets capacity

Has automatic

and self-cleaning

odour barrier

requirements accor-

instead of water

ding to EN 1253 (the

trap so it cannot

common European

dry out.

standard for floor

drains) and is

The odour barrier

VA approved.

Can easily be

removed from the

outlet unit using

outlet unit, disas-

the mounted hook,

sembled without

then separated and

tools, and cleaned.

becoming clogged.

RISER PIECE 35 mm

55 mm

placement of outlet unit.

can be removed and cleaned. Note: The odour barrier is VA approved.

cleaned.

Usage:

Line drain

Model:

1810

1820

H 35 mm

H 55 mm

Stainless steel

Plastic (PP)

Plastic (PPS)

Surface:

Brushed

Gasket:

TPE

EPDM

Item no.:

1810.0010

1820.0040

1820.0010

1820.0030

1830.0035

1830.0055

EAN no.*:

2446

8011

2439

6710

3436

3443

Materials:

*570769200xxxx

ACCES SORIES | LINE

PLUG

HOOK

SHOWER WIPER

1890.0000

1840.0000

5300.0000

For testing the

Hook to lift the

Shower wiper

wetroom solution

water trap out of

for cleaning the

for leaks before

the outlet unit.

shower cubicle.

laying tiles. Placed

Can be used on

in the drain grate. Fill the shower niche with 20 mm

line and corner models.

water and allow to stand for 24 hours to test the seal.

Line drain

Corner/Line

1890

1840

5300

Plastic (PP)

Plastic/steel

Steel/rubber

Brushed

TPE

1890.0000

1840.0000

5300.0000

9513

6802

8219

ACCES SORIES | CORNER

STRAINER

WATER TRAP

ODOUR BARRIER

RISER PIECE

2811.0010

2821.0020

2821.0030

2830.0095

Simplifies daily

Fits outlet units:

Placed between

floor drain

2411.0050/2411.0075/

2311.0032/2311.0050/

the drain unit and

maintenance.

2412.0075

2415.0032/2415.0050

the outlet unit.

Prevents water

Meets capacity

Has automatic

Suitable for very

trap becoming

and self-cleaning

odour barrier

low placement of

clogged.

requirements

instead of water

outlet unit.

according to EN

trap so it cannot

1253 (the common

dry out.

1 pcs. Ă&#x2DC; 40 mm

European standard

The odour barrier

be opened if

can be removed

required)

and cleaned.

Note: Cannot

for floor drains) and is VA approved.

side inlet (can

Can easily be

be combined

removed from the

with water trap

outlet unit, disas-

2821.0020.

sembled without tools, and cleaned.

Corner drain

2811

2821

H 95 mm

Stainless steel

Plastic (PP)

Brushed

TPE

EPDM

2811.0010

2821.0020

2821.0030

2830.0095

6666

6673

6680

6697

Specifikationer

C L A S S I C L I N E F R A M E | WA L L

Materiale: Rustfrit stål (AISI 304) Overflade: Børstet Indlæg: Kunststof

LINE 1500

*Please note installation dimensions!

CORNER 2500

The height of the frame (8, 10 or 12 mm) depends on the thickness of the floor tile. The rubber insert ensures accurate fitting inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is mandatory and has a double function – to support the grating and provide a perfectly flush finish with the tile/tile brick. Line drain

Usage: Length model: Length (L):

Item no.: EAN no.: Item no.: EAN no.: Item no.: EAN no.*:

300*

700*

800*

900*

1000*

1200*

200*

315 mm

695 mm

795 mm

895 mm

995 mm

1,195 mm

L1: 270/L2: 193 mm

Unit 1004

Fits:

8 mm (H) 10 mm (H) 12 mm (H)

Corner drain

Unit 1001, 1002, 1003, 1004, 1100, 5002, 5003

Unit 2011

1500.0308

1500.0708

1500.0808

1500.0908

1500.1008

1500.1208

2501.0208

3245

3276

3306

3337

3368

3399

2606

1500.0310

1500.0710

1500.0810

1500.0910

1500.1010

1500.1210

2501.0210

3252

3283

3313

3344

3375

3405

2613

1500.0312

1500.0712

1500.0812

1500.0912

1500.1012

1500.1212

2501.0212

3269

3290

3320

3351

3382

3412

2620

*570769200xxxx

(L)

19*

3 19

80* 10 3 19

(H)

19 270 270

270

Cross-section of outlet unit with frame and grating. *Height 270 of frame.

(H)*

137

NOTE! Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. *Frame width = 19 mm incl. 2 mm gap to rear flange

= 80 mm incl. 2 mm gap to rear flange

NOTE! Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane.

Specifications

C L A S S I C L I N E G R AT I N G

Materials: Stainless steel (AISI 304) Surface: Brushed Dimensions: 3 mm solid

Classic

Column

Inca

Square

Stripe

Anniversario Classic

Column

LINE 1600

CORNER 2600

The grating is placed on a countersunk bearing inside the frame to ensure a precise fit. Can only be used with ClassicLine frame.

Line drain

Usage:

Length (L): Item no.:

Classic EAN no.*: Item no.:

Column EAN no.*: Item no.:

Inca EAN no.*: Item no.:

Square EAN no.*: Item no.:

Stripe EAN no.*: Item no.: EAN no.*:

Anniversario

300*

700*

800*

900*

1000*

1200*

200*

280 mm

660 mm

760 mm

860 mm

960 mm

1,160 mm

191 mm

1601.0300

1601.0700

1601.0800

1601.0900

1601.1000

1601.1200

2601.0200

2231

1098

1104

1111

2255

2279

2651

1602.0300

1602.0700

1602.0800

1602.0900

1602.1000

1602.1200

2602.0200

2286

1128

1135

1142

2309

2323

2668

1603.0300

1603.0700

1603.0800

1603.0900

1603.1000

1603.1200

2330

1159

1166

1173

2354

2378

1604.0300

1604.0700

1604.0800

1604.0900

1604.1000

1604.1200

2385

1180

1197

1203

2408

2422

1605.0300

1605.0700

1605.0800

1605.0900

1605.1000

1605.1200

2897

2910

2927

2934

2941

2965

1606.0300

1606.0700

1606.0800

1606.0900

1606.1000

1606.1200

2603.0200

8226

8233

8240

8257

8264

8271

9322

(L)

Length

Corner drain

191 3

Specifications

CL AS SICLINE SOAP SHELF

Materials: Stainless steel (AISI 304) Surface: Brushed

LINE 1850

*Please note installation dimensions!

CORNER 2850

Soap shelf incl. grating and installation set. Designed for insertion in tile joint or screw mounting into existing shower cubicle. For corner installation only.

Usage:

Wall

Length model:

300*

200*

315 mm

288/204 mm

1850.0301

2850.0201

6369

6383

1850.0302

2850.0202

6376

6390

1850.0306

2850.0206

9377

9346

Length (L)*: Item no.:

Classic EAN no.*: Item no.:

Column EAN no.*: Varenr.: VVS nr.:

Anniversario

*570769200xxxx

315 315 20

Plan/Plan/Draufsicht Plan/Plan/Draufsicht

288

315 315 Classic

Classic Opstalt/Side Elevation/Seitenansicht SideSide Opstalt/Side Elevation/Seitenansicht

Column

Anniversario

Front Opstalt/Front Elevation/Frontansicht Front Opstalt/Front Elevation/Frontansicht

Specifications

H I G H L I N E PA N E L | C O R N E R

Materials: Stainless steel (AISI 304) Surface: Brushed Heightener set: Plastic (POM)

With frame

Without frame

HIGHLINE CORNER | CUSTOM

Without frame

HIGHLINE CORNER

Glue own material such as matching

The frame is optional but is designed to emphasise the exclusive design

floor tile on the base to complete

of the floor drain.

the solution. The Custom solution is

The height of the frame (10, 12 or 25 mm) depends on the thickness

placed directly inside the unit.

of the floor tile. Exclusive frame design with 4 mm solid stainless steel surface.

Corner drain

Usage:

Corner drain

Length model:

Custom

Panel excl. frame

Length model:

200

–

10 mm

12 mm

15 mm

25 mm

2950.0200

2920.0201

2911.0210

2911.0212

2911.0215

2911.0225

9384

6772

7038

7045

7052

7069

Height: Item no.: EAN no.*:

Panel incl. frame

*570769200xxxx

NB! Vær opmærksom på, at armaturet skal installeres 6 mm lavere end resten af gulvet for at opnå, at den påklæbede flise på Custom basen kommer i samme niveau

Cross-section of drain unit without frame/ with Panel in brushed stainless steel.

19 83

3 3 12 12 270

173 173

201 270

173 173

(H) (H)

137

10 201

270 H H

137

(H)

Specifications

H I G H L I N E F R A M E | L I N E | WA L L

Materials: Stainless steel (AISI 304) Surface: Brushed Insert: Synthetic material

*Please note installation dimensions!

LINE 1910

The frame is optional but is designed to emphasise the exclusive design of the floor drain. The height of the frame (10, 12 or 25 mm) depends on the thickness of the floor tile. Exclusive frame design with 4 mm solid stainless steel surface. Insert ensures accurate fitting inside the unit.

Line drain

Usage: Length model: Length (L)*:

EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.:

700*

800*

900*

1000*

1200*

315 mm

695 mm

795 mm

895 mm

995 mm

1,195 mm

1004

Fits unit: Item no.:

300*

10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)

1001, 1002, 1003, 1004, 1100, 5002, 5003

1910.0310

1910.0710

1910.0810

1910.0910

1910.1010

1910.1210

4242

4259

4266

4273

4280

4297

1910.0312

1910.0712

1910.0812

1910.0912

1910.1012

1910.1212

4303

4310

4327

4334

4341

4358

1910.0315

1910.0715

1910.0815

1910.0915

1910.1015

1910.1215

4365

4372

4389

4396

4402

4419

1910.0325

1910.0725

1910.0825

1910.0925

1910.1025

1910.1225

4426

4433

4440

4457

4464

4471

*570769200xxxx

(L)

19* 76* 8

(H) 25

NOTE! Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. Without use of frame: air gap between panel and floor tile = 6 mm. *Frame width = 19 mm incl. 2 mm gap to rear flange

= 76 mm incl. 2 mm gap to rear flange

Specifications

H I G H L I N E PA N E L | L I N E

Materials: Stainless steel (AISI 304)/safety glass Surface: Brushed/frosted Heightener set: Plastic (PE)

With frame

LINE 1920 | PANEL

Choose between solid brushed stainless steel or frosted glass. The set consists of a panel, rail, heightener set and screws. The set must be assembled before mounting. The Panel solution is placed directly inside the unit, where the shape of the rail ensures a precise fit. Should be installed with HighLine frame (see frame p. 39). Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.

Line drain

Usage:

300*

700*

800*

900*

1000*

1200*

253/315 mm

633/695 mm

733/795 mm

833/895 mm

933/995 mm

1133/1,195 mm

Brushed stainless steel

1920.0300

1920.0700

1920.0800

1920.0900

1920.1000

1920.1200

4488

4495

4501

4518

4525

4532

frosted glass White

1930.0300

1930.0700

1930.0800

1930.0900

1930.1000

1930.1200

6819

6826

6833

6840

6857

6864

frosted glass Black

1931.0300

1931.0700

1931.0800

1931.0900

1931.1000

1931.1200

6871

6888

6895

6901

6918

6925

Length Length with/without frame (L)*: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*:

*570769200xxxx

(L)

Cross-section of drain unit with frame and Panel in brushed stainless steel.

Heightener set H: 1, 2, 5, 15 mm. Adjust height for Panel when floor tile is over 10 mm thick. Installed between panel and rail.

Specifications

HIGHLINE CAS SE T TE | LINE

Materials: Stainless steel (AISI 304)

*Please note installation dimensions!

Surface: Brushed Heightener set: Plastic (PE)

With frame

LINE 1940 | CASSETTE

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before mounting. Available in 10, 12, 15 and 25 mm heights, (depending on the thickness of the floor tile). Can be supplemented with own material such as matching floor tile, terrazzo etc.onto which it is mounted. The Cassette solution is placed directly inside the unit, where the shape of the rail ensures a precise fit. Should be installed with HighLine frame (see frame p. 39). Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.

Line drain

Usage: Length Length with/without frame L)*: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*:

10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)

300*

700*

800*

900*

1000*

1200*

253/315 mm

633/695 mm

733/795 mm

833/895 mm

933/955 mm

1133/1,195 mm

1940.0310

1940.0710

1940.0810

1940.0910

1940.1010

1940.1210

5089

5096

5102

5119

5126

5133

1940.0312

1940.0712

1940.0812

1940.0912

1940.1012

1940.1212

5140

5157

5164

5171

5188

5195

1940.0315

1940.0715

1940.0815

1940.0915

1940.1015

1940.1215

5201

5218

5225

5232

5249

5256

1940.0325

1940.0725

1940.0825

1940.0925

1940.1025

1940.1225

5263

5270

5287

5294

5300

5317

*570769200xxxx

(L)

(H) 1

Cross-section of drain unit with frame and Cassette.

Heightener set H: 1, 2, 5, 15 mm. Adjust height for Cassette when floor tile is over 10 mm thick. Installed between cassette and rail.

Specifications

HIGHLINE CUSTOM | LINE

Materials: Stainless steel (AISI 304) Surface: Brushed Heightener set: Plastic (PE

Without frame

*Please note installation dimensions!

With frame

LINE 1950 | CUSTOM

The set consists of a Custom base, rail, heightener set and screws. The set must be assembled before mounting. Glue own material such as matching floor tile on the base to complete the solution. The Custom solution is placed directly inside the unit, where the shape of the rail ensures a precise fit. Can be installed with or without HighLine frame (see frame p. 39). Set includes 6 mm tile template, which is used as a distance piece when mounting without a frame.

Line drain

Usage:

300*

700*

800*

900*

1000*

1200*

253/315 mm

633/695 mm

733/795 mm

833/895 mm

933/995 mm

1133/1,195 mm

Item no.:

1950.0300

1950.0700

1950.0800

1950.0900

1950.1000

1950.1200

EAN no.*:

5324

5331

5348

5355

5362

5379

Length model: Length with/ without frame

*570769200xxxx

Cross-section of drain unit with frame and Custom (with own materials).

(L)

Cross-section of drain unit without frame and Custom (with own materials).

Without use of frame: gap between Custom and floor tile = 6 mm.

Heightener set H: 1, 2, 5, 15 mm. Adjust height of Custom base if the tiles on the base do not have the same thickness as the tiles on the rest of the floor. Installed between base and rail.

1 6 mm

INSTALLATION HIGHLINE CUSTOM

6 mm

EXAMPLE WITH 10 MM TILE 2

Rail

The Custom solution consists of a rail and a stainless steel base. The shape of the rail

ensures accurate fitting inside the unit. The rail and the base are screwed together after which your choice of tile can then be laid. A heightener set is included for height adjust-

ment of the base.

Overhang 14

1. Floor tile is cut to achieve a gap between the tile on

Custom base

Riser piece

the base and the other tiles of at least 6 mm.

2. Custom rail and base seen from below. LENGTH SECTION

3. BASE SIDES Lay own tiles on base with overhang of max. 20 mm

Custom Panel (5 mm)

(depending on tile thickness and type of tile.

Tile (10 mm)

Glue (1 mm)

In this example the overhang is 14 mm). 2

4. BASE, LONG SIDE 3 10 6

Lay own tiles on base with overhang of max. 10 mm (depending on tile thickness and type of tile. In this example the overhang is 6 mm).

Overhang 6

Riser piece

Recommended glue Manufacturer

Product

Bostik

• Maxibond

Tile mortar

CROSS-SECTION

• Maxibond X-TREME

Tile

• Clearbond Danalim

• Montage Ekstra 292 • Turbo tack 291

Henkel

• Pattex no more nails

Novatech

• Tec7 • Trans7

The products are shown in random orde

Tile (10 mm)

Tile mortar (3 mm)

Tile

Glue 6

10 3

SHOWERLINE | FIXED MODUL

FIXED MODULE 5002 | RIGHT ALIGNED SHOWER SCREEN The fixed module has a built-in slope so the floor in the shower cubicle slants the correct two % downward to the floor drain. The shower niche is framed by flanges on three sides and increases wet room safety. The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Fixed module Length model (A): *Installation dimensions (A):

800*

900*

1000*

863 mm

963 mm

1063 mm

*Installation dimensions (D):

901 mm

1001 mm

1101 mm

1301 mm

901 mm

1001 mm

1101 mm

1301 mm

1001 mm

1101 mm

1301 mm

Shower screen

800 mm

900 mm

1000 mm

1200 mm

800 mm

900 mm

1000 mm

1200 mm

900 mm

1000 mm

1200 mm

Frame (R):

795 mm

895 mm

995 mm

19 mm

Slope: Center (C):

401 mm

451 mm

EAN no.*:

601 mm

401 mm

451 mm

18 mm

Height (H): Item no.:

501 mm

601 mm

451 mm

501 mm

19 mm

601 mm

20 mm

5002.0808 5002.0809 5002.0810 5002.0812 5002.0908 5002.0909 5002.0910 5002.0912 5002.1009 5002.1010 5002.1012 9520

7205

7212

7229

9544

7236

7243

7250

7267

7274

7281

*570769200xxxx

Shower screen, outlet unit, frame BrusevĂŚg, udlĂ¸bshus, ramme og and grating/panel are not included! rist/panel bestilles separat!

4,5

(A) 54

(R)

2085

2104 65

19 (B)

glass Glas

58 60 - 165

65 40

19 slope (Fald)

3 14 packing11mm mm Pakning

Specifications

Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes. Floor construction: Concrete/wood Flooring: Tiles/tile bricks

ClassicLine

HighLine

*Please note installation dimensions!

FIXED MODULE 5003 | LEFT ALIGNED SHOWER SCREEN

The fixed module has a built-in slope so the floor in the shower cubicle slants the correct 2 % downward to the floor drain. The shower niche is framed by flanges on three sides and increases wet room safety. The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time. Combine with: outlet unit, frame, grating/panel and shower screen.

800*

900*

1000*

863 mm

963 mm

1063 mm

901 mm

1001 mm

1101 mm

1301 mm

901 mm

1001 mm

1101 mm

1301 mm

1001 mm

1101 mm

1301 mm

800 mm

900 mm

1000 mm

1200 mm

800 mm

900 mm

1000 mm

1200 mm

900 mm

1000 mm

1200 mm

795 mm

895 mm

19 mm 401 mm

451 mm

995 mm

19 mm

501 mm

601 mm

401 mm

451 mm

18 mm

19 mm

501 mm

601 mm

451 mm

501 mm

19 mm

20 mm

5003.0808 5003.0809 5003.0810 5003.0812 5003.0908 5003.0909 5003.0910 5003.0912 5003.1009 5003.1010 9537

7298

7304

7311

9551

7328

Shower screen, outlet unit,ramme frame og and BrusevĂŚg, udlĂ¸bshus, grating/panel are not included! rist/panel bestilles separat!

7335

7342

7359

7366

5003.1012 7373

(A) (D)

(R) 801, 901, 1001

601 mm

(C)

(B)

60 - 165

(Fald)

NOTE! Total construction height (excl. frame/grating) = height of the outlet unit + (H). (H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.

Specifications

SHOWERLINE | FLE XIBLE MODULE

Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes Floor construction: Concrete/wood Flooring: Tiles/tile bricks

ClassicLine

*Please note installation dimensions!

HighLine

FLEXIBLE MODULE 5000

Can be combined with units 1002/1003/1004 in all lengths. The flexible module has a built-in slope so the floor in the shower cubicle slants the correct 2 % downward to the floor drain. The shower niche is framed by flanges on two sides and increases wet room safety. The shower screen is installed in the track of the fixed module to eliminate risk of loosening over time. Combine with: outlet unit, drain unit, frame, grating/panel and shower screen. 900*

1000*

1200*

Shower screen depth:

900 mm

1,000 mm

1,200 mm

*Installation depth (D)

998 mm

1,098 mm

1,302 mm

Item no.:

5000.0900

5000.1000

5000.1200

EAN no.*:

7380

7397

7403

Model:

Slope:

*570769200xxxx

4,5

Drain unit, outlet unit, frame and Aﬂøbsarmatur, udløbshus, ramme grating/panel are not included!

og rist/panel bestilles separat!

) (D)

60 - 165

glass Glas

3 14

30 8 packing11mm mm Pakning

eng 2)00 rveæ ssce 102, 010 erru 0 0, B w 0 o 0, 01 sh 0, 0 1 0(90

2104

Specifications

GL AS SLINE | SHOWER BASE

Materials: 8 mm safety float glass Surface: anti-slip pattern

GLASSLINE | SHOWER BASE

The shower base is made of stainless steel and tempered glass. The base is decorated with a striped anti-slip pattern which matches the pattern of the GlassLine shower screen The base is installed as one large tile and fits ShowerLine, which ensures there is a correct 2% slope towards the drain.

Stripe

Design:

800*

Length model: Shower screen (D):

*Installation depth (D)

900 mm

1000 mm

900 1200 mm

900 mm

1000 mm

1000 1200 mm

900 mm

1000 mm

1200 mm

795 /813 mm 795 /913 mm 795 /1113 mm 895/813 mm 895/913 mm 895/1113 mm 995/813 mm 995/913 mm 995/1113 mm 10,5 mm

Height (H):

10,5 mm

Item no.:

5210.0809

5210.0810

5210.0812

5210.0909

5210.0910

5210.0912

5210.1009

5210.1010

5210.1012

EAN no.*:

7625

7632

7649

7656

7663

7670

7748

7786

7885

*570769200xxxx

10,40

Glas ESG white-glas

0,50

1 Schutzwinkel

0,70 Folie (Schollglas)

(D)

(D1)

0,50 Alufolie

Fase 0,5x45Â° umlaufend

800, 900, 1000

GL AS SLINE | SHOWER SCREENS

Design: Stripe

Design: Column

Design: Random

GLASSLINE | RIGHT ALIGNED SHOWER SCREENS 10 mm safety glass. The glass surface is treated with Cleantec nano technology, making it water-repellent, less susceptible to limescale and easier to clean. Applied screen print decoration on the outer surface. No visible screws or fittings in the finished result.

Design: Stripe

Design: Model: Depth (D): *Installation dimensions:

Design: Column

Design: Random

900*

1000*

1200*

900*

1000*

1200*

900*

1000*

1200*

900 mm

1,000 mm

1,200 mm

900 mm

1,000 mm

1,200 mm

900 mm

1,000 mm

1,200 mm

1,002 mm

1,102 mm

1,302 mm

1,002 mm

1,102 mm

1,302 mm

1,002 mm

1,102 mm

1,302 mm

2,104 mm

Height:

2,104 mm

55 kg

65 kg

79,5 kg

55 kg

65 kg

79,5 kg

55 kg

65 kg

79,5 kg

Item no.:

5110.0902

5110.1002

5110.1202

5120.0902

5120.1002

5120.1202

5130.0902

5130.1002

5130.1202

EAN no.*:

7441

7458

7465

7502

7519

7526

7564

7571

7588

Weight incl.

*570769200xxxx

26 68 45

(see page

Column

Random

(Se øvrige mål

49, s.50) 49, 50)

2104

Stripe

(D: 900,

1000, 12

00)

Specifications

Materials: stainless steel (AISI 304), 10 mm safety float glass Decoration: screen print

Design: Stripe

Design: Column

Design: Random

*Please note installation dimensions!

Design: Transparent

GLASSLINE | SHOWER SCREEN

GLASSLINE | LEFT ALIGNED SHOWER SCREENS 10 mm safety glass.

10 mm safety glass.

The glass surface is treated with Cleantec nano technology, making it water-repellent,

Both sides have been given a hydrophobic surface treatment with nano technology (Cleantec) so the shower screen can be placed to the right or the left.

less susceptible to limescale and easier to clean. Applied screen print decoration on the outer surface. No visible screws or fittings in the finished result.

No visible screws or fittings in the finished result. Design: Stripe 900*

1200*

900*

1000 mm 1200 mm

800 mm

900 mm

1002 mm 1102 mm 1302 mm 1002 mm 1102 mm 1302 mm 1002 mm 1102 mm 1302 mm

902 mm

1002 mm 1102 mm 1302 mm

900 mm

2104 mm 55 kg

65 kg

1200*

1000 mm 1200 mm

900* 900 mm

2104 mm 79,5 kg

55 kg

65 kg

1000*

Design: Transparent 900*

1000 mm 1200 mm

1000*

Design: Random 800*

900 mm

1000*

Design: Column

1200*

2104 mm 79,5 kg

55 kg

65 kg

1000*

1200*

1000 mm 1200 mm

2104 mm 79,5 kg

50 kg

55 kg

65 kg

79,5 kg

5110.0903 5110.1003 5110.1203 5120.0903 5120.1003 5120.1203 5130.0903 5130.1003 5130.1203 5100.0800 5100.0900 5100.1000 5100.1200

7472

7489

7496

7533

7540

7557

7595

7601

7618

9568

7410

2104 58

2104

D: 900, 1000, 26 1200 26

58 (D: 900,

00)

1000, 12

Stripe

Column

Random

Transparent

7427

7434

Specifications

G L A S S L I N E | SHOWER DOOR

Materials: stainless steel 8 mm safety float glass

SHOWER DOOR

THE SHOWER DOOR IS ADAPTED TO THE HEIGHT AND WIDTH OF UNIDRAIN’S GLASSLINE SHOWER WALL. MUST BE COMBINED WITH UNIDRAIN® TOP RAIL. Tile thickness incl. tile adhesive: 8-12 mm The surface is treated with Cleantec nanotechnonology on both sides Supplied with two hinges and a sealing strip

Model:

800*

900*

1000*

*Depth

776 mm

876 mm

976 mm

2023 mm

Height: Item no.:

5400.0800

5400.0900

5400.1000

EAN no.*:

8479

8486

8462

GlassLine top rail GlassLine topstang

GlassLine rail GlassLinetop topstang

2023

200

GlassLine shower door GlassLine brusevæg

200 776/ 876/ 976 (glas dimension without hinge)

The shower door is flush Brusedøren ﬂugter with steel profile medthe stålproﬁlen på of the Glassline screen GlassLineshower brusevægen

Specifications

GL AS SLINE | SHOWER SCREENS

Materials: stainless steel (AISI 304)

TOP RAIL 5310

For finishing the shower screen. A top rail is recommended for stabilising shower screens measuring 1,200 mm or more. The top rail is available in one length and can be adjusted to fit the individual shower cubicle.

For shower screen

Right aligned shower screens

Left aligned shower screens

Materials:

Brushed stainless steel

Fits length model:

700-1200

Width:

40 mm

Height::

15 mm

Item no.:

5310.1202

5310.1203

EAN no.*:

8158

8295

Usage: Fits:

*570769200xxxx

40 700 / 800 / 900 / 1000 / 1200

200 100

100

15 40

Specifications

Materials: stainless steel (AISI 304), 10 mm safety float glass

TOP RAIL 5320

For finishing the shower screen. A top rail is recommended for stabilising shower screens measuring 1,200 mm or more.

For shower screen

Right aligned shower screens

Left aligned shower screens

Brushed stainless steel, glass

700

800

900

1000

1200

700

800

900

1000

1200

40 mm

15 mm

5320.0702

5320.0802

5320.0902

5320.1002

5320.1202

5320.0703

5320.0803

5320.0903

5320.1003

5320.1203

8165

8172

8189

8196

8202

8301

8318

8325

8332

8349

700 / 800 / 900 / 1000 / 1200

15 40

M O D U L 110 0

Module 1100 is a customised modular line drain system that is manufactured to order. Modular line drains can be many meters long and are therefore ideal for institutions, changing rooms and large bathrooms. Outlet units, frames and gratings are taken from the permanent range. This means that frames and gratings are placed end-to-end, making maintenance easy and manageable. A number of outlet units are also used to ensure as high capacity and low construction height as possible. Module 1100 for mid-floor placement is available upon request.

A: Grating or panel B: Frame C: Flex frame C: Drain unit D: Outlet unit

B C

Welded together into one component prior to delivery!

C A B

C D

E E Inward corner

Examples of solutions

One module with flex frames

Two modules without flex frames

Maintain the vertical end flanges, even those with odd dimensions. Extra space can be filled out with flex frames at the sides.

A modular line drain system that covers double the length of a standard model when not extended with flex frames.

Two modules with angle and flex frame

Two modules with flex frames

Allow the modular line drain to follow the corners in the shower area so that showers can be installed in several walls.

If the modular line drain has odd measurements, the extra space can be filled out with symmetrically placed flex frames.

Outward corner

YOU CAN CALCULATE YOUR OWN modular line drain system and find the measurement that best fits your individual bathroom. • Enter your bathroom measurements and choose your combination of modules • Choose a ClassicLine or HighLine solution • Choose an outlet unit Immediately view a design showing the specifications of your individual line drain. Send your calculations to us and we will prepare an estimate for you. www.unidrain.dk/modul1100

Specifications

FLE X FR AMES

Materials: Stainless steel (AISI 304) Surface: Brushed

Flex frames are installed along with floor tiles!

A: Flex frame end piece/middle piece

B: Flex frame inward corner C: Flex frame outward corner ClassicLine

High Line

FLEX FRAMES

Flex frames are used to extend the visible lenghth of the floor drain. The are laid end-to-end and installed using tile mortar, so there is no need to cut small pieces of tile. Flex frames can be used for: - Drain systems from the permanent range, allowing the module unit to be customised by down to a 10 mm jump. - Module 1100 line drains that cover the distance between frames and gratings to provide a visually uninterrupted result. Line drain

Usage:

ClassicLine

Model:

H 8 mm

Height:

HighLine

H 10 mm

H 12 mm

H 10/12/15/25 mm

Item no.:

EAN no.*:

Item no.:

EAN no.*:

Item no.:

EAN no.:*

Item no.:

EAN no.*:

10 mm

1510.0108

3771

1510.0110

3788

1510.0112

3795

1911.0110

6420

20 mm

1510.0208

3801

1510.0210

3818

1510.0212

3825

1911.0210

6437

Length:

Line drain

30 mm

1510.0308

3832

1510.0310

3849

1510.0312

3856

1911.0310

6444

40 mm

1510.0408

3863

1510.0410

3870

1510.0412

3887

1911.0410

6451

50 mm

1510.0508

3894

1510.0510

3900

1510.0512

3917

1911.0510

6468

60 mm

1510.0608

3924

1510.0610

3931

1510.0612

3948

1911.0610

6475

70 mm

1510.0708

3955

1510.0710

3962

1510.0712

3979

1911.0710

6482

80 mm

1510.0808

3986

1510.0810

3993

1510.0812

4006

1911.0810

6499

4020

1510.0912

4037

1911.0910

6505

90 mm

1510.0908

4013

1510.0910

100 mm

1510.1008

4044

1510.1010

4051

1510.1012

4068

1911.1010

6512

110 mm

1510.1108

4075

1510.1110

4082

1510.1112

4099

1911.1110

6529

120 mm

1510.1208

4105

1510.1210

4112

1510.1212

4129

1911.1210

6536

corner

1530.1208

6963

1530.1210

6970

1530.1212

6987

1913.1210

6550

corner

1520.0808

6932

1520.0810

6949

1520.0812

6956

1912.0810

6543

*570769200xxxx

F R E E S TA N D I N G S Y S T E M DR AIN UNIT | LINE | FLOOR

Introduction

Specifications

Sides without wall flanges must comply with rules regarding min. distance to wall.

Materials: 1.5 mm stainless steel (AISI 304) Surface: Pickled Membrane: Lubrication membrane or sheet membranes. Floor construction: All Flooring: Tiles/tile bricks

For line units placed against rear wall, we refer to series 1000 (see pages 18).

LINE 3002

*Note installation dimensions!

ClassicLine

HighLine

LINE 3004

For shower cubicle with one solid wall.

For shower cubicles without fixed side walls.

The drain unit has one wall flange and three

The drain unit has four floor flanges.

floor flanges. Incl. Four height-adjustable feet

Incl. Four height-adjustable feet (120-220 mm).

(120-220 mm). Note: see frames on page 62

Note: see frames on page 62

Line drain

Left or right (can be turned 180Ë&#x161; if necessary)

None

Usage: Wall flange:

3004

3002

700*

900*

300*

700*

800*

900*

1000*

1200*

Length (L):

757 mm

957 mm

432 mm

812 mm

912 mm

1,012 mm

1112 mm

1312 mm

Center (C):

351 mm

451 mm

206 mm

396 mm

456 mm

496 mm

556 mm

656 mm

Height (H):

17 mm

19 mm

12 mm

17 mm

18 mm

19 mm

20 mm

22 mm

Frame (R):

695 mm

895 mm

315 mm

695 mm

795 mm

895 mm

995 mm

1195mm

Item no.:

3002.0700

3002.0900

3004.1000

3004.1200

EAN no.*:

6109

6116

7083

7090

Length model:

3004.0300 3004.0700 6123

6130

3004.0800 3004..0900 7076

6147

*570769200xxxx

(L)

(L) (R)

(R)

(L) (R)

(L)

NOTE! Total construction height (excl. frame/grating) = height of the outlet unit + (H). (H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.

208 105 86

(H)

105 86

(H)

208

54 (H) 71

103 57 86

208

54 (H) 71

208

103 86

(H)

208

(R)

208

CL AS SICLINE FR AME | FLOOR

LINE 3500 | CLASSICLINE

The height of the frame (8, 10 or 12 mm) depends on the thickness of the floor tile. The rubber insert ensures accurate fitting inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. (see gratings p. 35). The frame is mandatory and has a double function â&#x20AC;&#x201C; to support the grating and provide a perfectly flush finish with the tile/tile brick. Line drain

Usage: Length model: Length (L): Fits: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*:

8 mm (H) 10 mm (H) 12 mm (H)

300*

700*

800*

900*

1000*

1200*

315 mm

695 mm

795 mm

895 mm

995 mm

1195 mm

Unit 3004

Unit 3002, 3004

Unit 3004

Unit 3002, 3004

3500.0308

3500.0708

3500.0808

3500.0908

6154

6185

8806

6215

3500.0310

3500.0710

3500.0810

3500.0910

6161

6192

8813

6222

3500.0312

3500.0712

3500.0812

6178

6208

8820

Unit 3004 3500.1008

3500.1208

3500.1010

3500.1210

3500.0912

3500.1012

3500.1212

6239

8851

8882

*570769200xxxx

(L)

10 71 10

(H) 17

NOTE! Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane.

Specifications

HIGHLINE FR AME | FLOOR

Materials: Stainless steel (AISI 304)

*Please note installation dimensions!

Surface: Brushed Insert: Synthetic material

LINE 3910 | HIGHLINE

Usage: Length model: Length (L): Fits: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*: Item no.: EAN no.*:

10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)

300*

700*

800*

900*

1000*

1200*

315 mm

695 mm

795 mm

895 mm

995 mm

1195 mm

Unit 3004

Unit 3002, 3004

Unit 3004

Unit 3002, 3004

3910.0310

3910.0710

3910.0810

3910.0910

3910.1010

3910.1210

6246

6284

8899

6321

8936

8974

3910.0312

3910.0712

3910.0812

3910.0912

3910.1012

3910.1212

6253

6291

8905

6338

8943

8981

3910.0315

3910.0715

3910.0815

3910.0915

3910.1015

3910.1215

6260

6307

8912

6345

8950

8998

3910.0325

3910.0725

3910.0825

3910.0925

3910.1025

3910.1225

6277

6314

8929

6352

8967

9001

Unit 3004

*570769200xxxx

(L)

8 65 8

(H) 25

NOTE! Frame height (H) = tile thickness + approx. 2 mm for tile mortar and membrane. Without use of frame: air gap between panel and floor tile = 6 mm.

MATLINE The Nordic climate is a challenge, with snow, rain, mud and slush for much of the year. In active family life, weather conditions often make it difficult to keep your home presentable all the time. The unidrainÂŽ MatLine system is a highly functional and elegant solution to an everyday problem. Use MatLine in the utility room or in the hall and connect it to the existing drain system so that any excess water drains away.

MATLINE - AN INTELLIGENT MAT SYSTEM

INSTALLATION DIRECTLY ON THE SEWER PIPE

Concrete

Fitting

Insulation

Mat

Strainer

Frame

Reinforcement

INSTALLATION WITH OUTLET UNIT

Concrete

Mat

Fitting Odour barrier

Reinforcement

Outlet unit

Insulation

Frame

• S tylish Danish design • Minimises dirt in the home • Easy to clean • Connects directly to drain • Flexible system, where the height can be adjusted depending on the thickness of the floor tiles • UV and chemical resistant nylon brushes that can withstand many years of normal use • Intelligent brushes, straighten themselves after use

A: Mat B: Frame C: Strainer D: Fitting E: Height-adjustable supports (accessory)

MatLine is useful and relevant in every building. The intelligent mat system consists of four parts: A mat, frame, strainer and fitting. A hook is supplied to make raising the mat easier.

The mat is flush with the surrounding floor and surrounded by a slim steel frame in brushed stainless steel. There is a strainer under the mat to catch sand and gravel.

Below that is the fitting, which is cast into the floor. Height-adjustable supports are available to order to facilitate the casting process.

Specifications

M AT L I N E

Materials: Stainless steel (AISI 304) Surface: Brushed Insert: Synthetic material

MATLINE COMPLETE

HEIGHT-ADJUSTABLE SUPPORTS

The complete MatLine includes grating, frame and

A pack of four adjustable feet is available as an optional

mat with nylon brushes fitted. A strainer and hook

extra. The feet can be fitted during the installation

(for lifting) are also included.

process when required.

A complete MatLine set comes in two separate packs according to the construction process, in which the grating is installed first followed by the frame and mat. MĂĽtte

(accessory) MatLine

800

Dimension/ Frame:

500 x 800 mm

Dimension/ Fitting:

619 x 918 mm

tile thickness: 8-25 mm

80 - 150 mm

Item no.:

6001.0800

6006.0000

EAN no.*:

9025

9315

Usage: Length model:

Height:

*Please note installation dimensions!

*570769200xxxx

500

799

Ă&#x2DC; 110

116

819

520

619

918

M AT L I N E

STRAINER

NYLON BRUSHES – PACK OF 11

STEEL PANEL

The strainer is in stainless steel and

The nylon brushes will need

The steel panel on Matline can be

is placed in the grating over the drain.

replacing after several years of wear.

easily replaced.

The original brushes are easy to change and individual replacements are available.

parts

800

Ø 110 mm

L: 774

780 x 32 x 25

Materials:

rustfri stål (AISI 304)

Nylon (PA)/Polypropylen (PP)

rustfri stål (AISI 304)

Item no.:

6005.0000

6001.0801

6003.0800

EAN no.*:

9087

9049

9063

Usage:

parts

Length model: Dimensions:

*570769200xxxx

Specifications

O U T L E T U N I T | M AT L I N E

Materials: Plastic (PP) Gasket: EPDM

MATLINE 2511.0075

MATLINE 2512.0075

ODOUR BARRIER 3820.0010

Horizontal outlet Ø 50 mm.

Horizontal outlet Ø 75 mm.

The odour barrier can be removed

Can be rotated 360˚, which may

and cleaned.

facilitate direction of pipework.

Matline drain

Matline

Outlet dimensions

Ø 50 mm

Ø 75 mm

Outlet direction:

Horizontal

Vertical

Lodret

0,8 l/s

0,9 l/s

1,0 l/s

Water trap:

without

Side inlet:

without

Matline 6001.0800

2511.0075, 2512.0075

Item no.:

2511.0075

2512.0075

3820.0010

EAN no.*:

9483

9490

9506

Usage:

Capacity:

Fits:

D128 D195

D128

139

196

173

D128

106

D75

162

128

ø108

D195

106

193

Edition 3. Unidrain assumes no responsibility for printing errors. 700 UK

Unidrain A/S Farum Gydevej 71 DK-3520 Farum T +45 3910 1010 F +45 3910 1020 info@unidrain.com www.unidrain.com