MANUAL PLASMA CUTTING MADE EASY.
After two long years of development, the HandyPlasma has finally arrived a light and portable hand-held plasma cutting machine, weighing only 13.5kg (including the torch), with a 220V 50/60Hz single phase power supply. The interface not only incorporates the latest technology in a colour LCD panel, but also simplifies every cutting setup. With a single knob, the operator can select each function to meet any need. Available in two models.
MANUAL PLASMA CUTTING MADE EASY. HandyPlasma is the introductory manual plasma cutter that is powerful enough to handle tough cutting jobs without dealing with complicated set-up and operation. Cut through mild steel, stainless steel or aluminuim grates and plates with ease. Available in two versions to meet your required thickness level: HandyPlasma 35i Recommended cut - 12 mm Maximum cut - 16 mm
HandyPlasma 45i Recommended cut - 15 mm Maximum cut - 24 mm
INTUITIVE LCD DISPLAY. The HandyPlasma panel is totally user-friendly with a 2.8” color LCD screen, that clearly displays all settings you need to see at a glance - cutting mode, input voltage, and input air pressure.
CUTTING PLATES
ALL IN ONE KNOB. Complete with the functions necessary for any cutting job, HandyPlasma cutting machine is simple and quick to set up with just one knob:
1 Select the desired mode for torch control, CUTTING GRATES
2T - On/Off 4T - Lock-on
2 “Select “grate” or “plate” depending on the material
you’ll be cutting - there is a specific setting for each!
3 You are ready to start cutting!
AIR REGULATOR. The HandyPlasma comes with an automatic internal regulator that manages the air passing through the torch. It is not necessary to adjust the gas – the machine automatically detects the inlet and outlet pressure. It comes with an external air filter with a purge valve for removing excess oil in the compressed air.
CONSUMABLES. A complete line of consumables has been specially developed to take advantage of the full potential of the HandyPlasma and keep it always ready for work.
TORCH INCLUDED. The HandyPlasma comes ready to use, with a 60A torch and a five metre lead. This ergonimic torch features a trigger lock for greater safety and a choice of 2T/4T function on the machine panel. The automatic system purges gas after cutting, increasing the life of the consumables.
PACKAGE CONTENTS n
Plasma Power Source HandyPlasma 35i or 45i
n
Handy Torch 60A Plasma Torch
n
Work Cable and Clamp
n
Wrench for Air Filter
n
1x 6 mm Nitto Air Line Connector
n
Shoulder Strap
n
Operating Manual (Power Source and Plasma Torch)
SPECIFICATIONS
HandyPlasma 35i
HandyPlasma 45i
Mild Steel Clean Cut Mild Steel Severance Stainless Clean Cut Aluminium Clean Cut Piercing Capacity Input Power Duty Cycle Input Air Required Generator Required
12 mm 16 mm 10 mm 8 mm 6 mm 240V, 1 ph, PFC, 10A 35 A @ 35% 7.3 Bar, 110 l/min 8 kVA
16 mm 24 mm 12 mm 10 mm 10 mm 240V, 1 ph, PFC, 15A 45A @ 35% 7.3 Bar, 110 l/min 9 kVA
Dimensions L x W x H
415 x 176 x 324 mm
415 x 176 x 324 mm
Weight
11.8 kg
11.8 kg
HandyPlasma 35i System Package HandyPlasma 45i System Package HandyPlasma 60A Plasma Torch Plasma Cutting Tip 35A (5 pcs) Plasma Cutting Tip 45A (5 pcs) Electrode (5 pcs) Plasma Standoff Guide Plasma Shield Cup Plasma O-Ring Plasma Torch Gas Diffuser lnline Air Filter Plasma Filter Cartridge Circle Cutting Guide
0559160135 0559160145 0559337000 0559337001 0559337002 0559337003 0559337004 0559337005 0559337006 0559337007 0559337039 0559337040 0559337041
TACKLE PLASMA WITH EASE. Take advantage of plasma cutting without the complications at: esab.com/handyplasma.
ESAB / esab.com
XA00204820 / GL / English / 02-2020 / Note: Specifications subject to change without notice. Products may vary from those pictured.
ORDERING INFORMATION
HandyPlasma 35i/45i Portable plasma cutting
Hand-held, light and portable power source for plasma cutting with a 220/ 230V 50/60Hz single phase power supply. Very simple to use and with a colour LCD panel and all adjustments in just one knob. No need to adjust the gas the machine automatically detects the inlet and outlet pressure. An automatic system purges gas after cutting, increasing the useful life of the consumables. Available in two versions, HandyPlasma 35i Recommended cutting capacity = 6 mm Maximum cutting capacity = 12 mm HandyPlasma 45i Recommended cutting capacity = 10 mm Maximum cutting capacity = 16 mm ■ Light and portable, weighing only 13.5 kg (including torch) HandyPlasma 35i / 45i
■ Easy to use 2.8" colour LCD panel, with all adjustments in just one knob ■ Torch trigger 2T/4T function ■ Torch trigger lock for greater safety
Industry
■ Grate or plate cutting functions
■ Repair and Maintenance
■ Comes with torch included
■ Civil Construction
■ Two-year guarantee for the power source and three months for the torch
■ Agricultural Equipment ■ Industrial and General Fabrication
Visit esab.com for more information.
Simple and intuitive LCD panel
HandyPlasma 35i/45i Specifications HandyPlasma 35i Primary Voltage
HandyPlasma 45i
220 V Âą 10%, 1 ph, 50/60 Hz
Cutting Capacity Mild Steel Stainless Steel Aluminuim
12 mm 10 mm 8 mm
16 mm 12 mm 10 mm
Piercing Capacity
6 mm
10 mm
Rated kVA
8 kVA
9 kVA
Duty Cycle
35 A @ 35%
45 A @ 35%
Air Pressure
7.3 Bar
Air Flow
110 l/min
Torch Air Pressure
4.6 Bar
Enclosure Class
IP21C
Certification Mark
CE
Dimensions L x W x H
415 x 176 x 324 mm
Weight incl. torch
13.5 kg
Ordering Information HandyPlasma 35i, CE
0559160135
HandyPlasma 45i, CE
0559160145
Options & Accessories Inline Air Filter
0559337039
Plasma Filter Cartridge
0559337040
Circle Cutting Guide
0559337041
Wear & Spare Parts HandyPlasma 60A Plasma Torch
0559337000
Plasma Cutting Tip 35A (5 pcs)
0559337001
Plasma Cutting Tip 45A (5 pcs)
0559337002
Electrode (5 pcs)
0559337003
Plasma Standoff Guide
0559337004
Plasma Shield Cup
0559337005
Plasma O-Ring
0559337006
Plasma Torch Gas Diffuser
0559337007
ESAB / esab.com
XA00205020 / GL / EN / 10/2020 / ESAB reserves the right to alter specifications without prior notice.
Delivery includes plasma torch, 3 m work lead with ground clamp, shoulder strap, compressed air connector and air filter wrench.