Bagged Goods Can be used building or repairing foundation walls, sidewalks, curbs, steps and ramps. For pouring concrete 2 in. thick or more, this concrete mix consists of a uniformly blended, properly proportioned mixture of stone, gravel, sand, and Portland cement. •Use for making repairs to foundation walls, walkways or steps and setting mailboxes and posts • For pouring concrete 2 in. thick or more • Just add water • 60 minute working time • High-strength 4,000 PSI concrete
Item No. 27501879 27501753
FastSet Concrete Mix
Sets posts without mixing. The concrete can be poured dry then soaked with water and is designed to set hard in approximately 20 - 40 minutes. • Used to set mailbox posts, fence posts and lamp posts without mixing • Designed to pour dry then soak with water • 20 - 40 minute set time • 4,000 PSI
5000 PSI Concrete
Can be used for cold weather applications. Ideal for pouring concrete 1-1/2 in. thick or less, this concrete mix consists of a commercial grade blend of Portland cement, sand, gravel. • Covers approximately 0.6 cu. ft. • Ideal for cold weather application • Can be used for any concrete application less than 1-1/2 in. thick • Just add water • 60 minute working time • High-strength 5,000 psi concrete • Exceeds ASTM C 387 requirements for high early strength concrete
DESCRIPTION 60 lb 90 lb
portland cement
Item # 27501881
Can be mixed with aggregate (not included) to make base-coat stucco, concrete and mortar. The concrete mix and mortar mix are then used to make high-strength repairs in applications requiring Type 1 Portland cement. • 94 lb. bag • Used to make concrete, mortar and stucco • 60-minute working time
Item # 27501880
Non-Shrink Grout
Designed for precision grouting and general construction applications. The grout can be mixed to a plastic consistency or a fluid consistency and can be used to grout anchoring applications, steel columns and pre-cast concrete. • Used for general construction applications, for precision grouting and for keyway and base plate grouting • Suitable for grouting pre-cast concrete, steel columns, anchoring applications and heavy equipment • Mixes to a fluid consistency or a plastic consistency • 30-minute set time • 8,000 PSI • Exceeds ASTM C 1107, R-3, and ASTM C 1107
Item No. Item # 27503046
858-332-2133
Building Materials
Concrete Mix
27502058 27501049
DESCRIPTION 50 lb 20 lb
Unitis Contractor Supplies
111
Bagged Goods mortar mix
3/4 rock
• Use for construction and repair of brick, block and stone • Just add water • 45 minute working time • 750 psi compression strength • Meets ASTM C 270 for Type N Mortar
• Use for landscaping, walkways, patios, gardening, fishponds, tree wells and rooftops
Consists of a uniformly blended mixture of fine sand and Type N masonry cement and can be used for laying brick, block or stone.
Item # 27501955
Building Materials
all purpose sand
Item # 90304982
112
3/8 gravel
Made of a washed, properly graded coarse sand and is suitable for use as an underlayment for pavers and flagstones. This gravel increases traction on snow and ice and can be mixed with cement and gravel to make concrete mix. • Designed for use as an underlayment for interlocking pavers and flagstones • Ideal for patios, walkways and driveways • Adds traction on snow and ice • Use for new construction and the renovation of paver applications
Item # 27502832
Features a washed coarse sand that can be used as underlayment for brick pavers and flagstones. This sand increases traction on snow and ice and can be mixed with portland cement and gravel to make concrete mix. • Use as underlayment for brick pavers and flag stones • Ideal for patios, walkways and driveways • Suitable for new constructions and the renovation of paver applications • Mix with portland cement and gravel to make concrete mix
Use gravel to supply your masonry projects with added strength or to provide an appealing appearance to an outdoor project.
asphalt cold patch
For repairing potholes and large cracks in asphalt pavement • No heating or mixing required, pour directly out of bag • Can be formed and compacted • Patched area is ready for immediate use
Item # 90305198
marking lime
Today’s athletic fields demand a tough, long-lasting way to designate lines on grass surfaces. Not all organizations want to work with difficult to use paints or other solvents in these situations. Quikrete athletic field marker is pulverized white limestone or marble, used for marking athletic fields easily and effectively. • Good flow characteristics for easy application • Correctly sized material will ensure the application of well-defined, highly visible white boundary lines • Ideal in situations when the application of painted lines is not desired
Item # 27502381
Unitis Contractor Supplies
Item # 27503045
858-332-2133
Concrete Products Water Stop Cement
anchoring cement
• Seals leaks and blocks running water in cracked concrete and masonry surfaces • Suitable for above-grade and below-grade repairs • Mix golf-ball sized portions • 3 - 5 minute set time • 5,500 psi
• Use for setting fences, columns, signs, posts and handrails • Just add water • 10 minute working time • 7,000 psi compression strength
Item No. 27501051 27501050
DESCRIPTION
Item No.
10 lb 20 lb
27501054 27501053
Formulated to set in approximately 10 - 15 minutes, the Quikrete 10 lb. Quick-Setting Cement has molding properties that make it perfect for repairing the broken edges of concrete curbs and steps. • Ideal for repairing the edges of concrete curbs and steps • Mix can be molded into place • Sets in 10 - 15 minutes • 6,000 psi
858-332-2133
Vinyl Concrete Patcher
Ideal for making smooth repairs to cracked or chipped concrete floors, sidewalks or steps. The patch has strong adhesive properties and has a 40 minute working time. • Use for making smooth repairs to cracked or chipped concrete floors, sidewalks or steps • Just add water • 40 minute working time • High-strength 5,000 psi concrete
DESCRIPTION 10 lb 20 lb
Fast set repair mortar
Quick Setting Cement
Item # 27501055
Can be used for setting fences, columns, signs, posts and anything metal to be anchored to concrete. This fast-setting formula expands as it hardens to fill in gaps and lock itself into place.
Specifically formulated to make structural repairs to any concrete, masonry or stucco surface. Low sag formula makes it ideal for vertical and overhead repairs. 20-30 minute working time and unique properties allow sculpting of the material during placement. Exceeds ASTM C 928 R-2. Use for Vertical and Overhead Repairs to: • Concrete • Masonry • Stucco Surfaces
Item # 27501056
Concrete Fortifier
Provides increased bond strength when mixed with Quikrete Sand Mix and Quikrete Surface-Bonding Cement. The ready-to-use fortifier improves water resistance when added to stucco, tile grouts and thin-set mortars. • Increases bond strength and improves water resistance when added to concrete products • Compatible with Quikrete sand mix and quikrete sur face-bonding cement • Use 1 qt. - 1 Gal. of mix per bag • Reduces and sometimes eliminates the need for moist curing
Item # 27501048
Unitis Contractor Supplies
Building Materials
Blocks running water and seals leaks in cracked masonry and concrete surfaces. The cement is suitable for above grade and below-grade concrete and masonry repairs.
Item # 27501058
113
Concrete Products Concrete Bonding Adhesive
Can be used indoors and outdoors on concrete overlays 1 in. or thicker. The adhesive is designed to permanently bond new concrete, stucco and plaster to existing concrete, stucco and plaster.
Item # 27501057
Item # 27501070
Concrete Cure & Seal
Use to cure and seal fresh concrete and seal existing concrete or masonry surfaces. This sealer helps protected against acid, salt, food stains, grease, oil and more.
Building Materials
• For use with fresh concrete as a cure or with existing masonry and concrete surfaces as a sealer • Offers protection against grease, oil, acid, salt and food stains • Can be applied via sprayer or roller (sold separately) • Meets ASTM C 309
114
Add to concrete for fast set-up time. The accelerator mix is ideal for setting fence posts, swing sets, curbs and lamp posts. • Use to set lamp posts, curbs, swing sets and fence posts • Suitable for concrete applications less than 1-1/2 in. thick • Can withstand foot traffic in 10 - 12 hours • Achieves 5,000 psi after 28 days • Exceeds ASTM C 387 requirements for early strength concrete
• Used to bond new and existing concrete, stucco and plaster • Used for concrete overlays 1 in. or thicker • For indoor and outdoor applications • Does not require rough surfaces • 3-hour working time • Exceeds requirements for Type I and Type II ASTM C 1059
Item # 27501068
Concrete Mix Accelerator
Waterproofing Sealer
High Gloss Sealer
• Water-based penetrating silicone waterproof sealer providing a natural look • Waterproofs and protects concrete, brick, masonry, pavers and stucco surfaces • UV-resistant
• Water-based siliconized acrylic clear sealer providing a high-gloss finish • Waterproofs, protects and enhances the color of concrete, brick, masonry, pavers, and stucco surfaces
Water-based, silane-siloxaine formulation designed to waterproof and seal concrete, masonry, brick, pavers, and stucco surfaces. Waterproofing Sealer - Natural Look repels water and protects from oil, gasoline, grease, salts and UV rays without changing the appearance of the substrate.
Water-based high gloss film-forming sealer for interior or exterior, horizontal or vertical surfaces. Suitable for decorative, stained or exposed-aggregate concrete and for stone and pavers. Resists deicing salts, oil, gasoline, grease, food stains and many household chemicals. The sealer is UV resistant and demonstrates excellent low temperature film formation properties.
Item # 27501069
Unitis Contractor Supplies
Item # 27501107
858-332-2133
Concrete Finishing Tools 16” x 4-1/2” Pool Trowel
• Highest grade hardened and tempered spring steel blade, properly shaped • Short aluminum alloy Xtralite® mounting is lightweight but very strong • Blade is flexible enough to bend to almost any radius • Resilient DuraSoft® handle, provides soft feel, reduces fatigue • U.S. Patent Nos. 5,522,111 and 5,713,096 • 8 Rivets
Item # 19202841
• Aluminum alloy Xtralite® mounting is lightweight but very strong • Curved natural finish hardwood handle
Item # 19207418
16” x 3-1/8” roud end Mag Float • Extruded from very hard, durable, lightweight magnesium • Fully rounded ends help prevent float marks • Comfortable handle is positioned to give the tool perfect balance • Handles are secured with torque pad screws that will not back out • Magnesium floats produce a smoother finish than wood • Large Round Wood Handle
• Allows multi-angle floating • Enables use with extension handles for extremely long ranges • Full pitch controlled by half turn of handles • Fits magnesium bull floats and fresnos without adapter plates • Fits all push button handles 1 3/8” and 1 3/4” without any additional adapters
Item # 19202851
36” x 7-3/16” wood Bull Float
• Wood blade -3/4” thick • Made with a strong structural angle “I” frame made of 1 X 1 X 1/8 steel attached with ten screws • Frame is heavier than other manufacturers use, giving extra strength • Blade ends have been sanded and tapered for easy use
Building Materials
Item # 19204568
Magnesium Bull Float Bracket
Item # 19201952
Mini Rock It Angle Adapter
• Allows handle placement in any position within a 180º sweep • Turn handle clockwise to lock in position; counter clockwise to unlock • Connects push button handles to edgers, groovers, fresnos and bull floats
858-332-2133
• Short aluminum alloy mounting • Blade is flexible enough to conform to almost any radius • Comfort grip or hardwood handle
Item # 19207466
8” X 3” Midget Trowel
Item # 19202852
14” x 4” Pool Trowel
30” magnesium Darby Float
• T-Slot design allows for virtually limitless handle orientations • Same lightweight, durable extrusion as our magnesium floats • Replacement handles available • Darby with bull float bracket is ideal for lightweight concrete or floating in tight places • Includes (1) 30” Darby and (1) TSDSH (#16821) DuraSoft® Handle
Item # 19204567
Unitis Contractor Supplies
115
Concrete Finishing Tools 36” x 7” Resin Bull Float
• Works the slab like a wood float but it lasts many times longer • Great for working color hardeners into concrete • 6-hole mounting plate to fit the widest variety of mounting configurations • Angle steel backbone for decreased blade twist • Broken-in, beveled edges on ends of worksurface • Square End
r Of o t u b i r t s Proud Di
Item # 19201951
6’ Push Button Handle
• Constructed of thick-walled aluminum tubing • Heat Treated, lightweight • Quick connect snap spring positively lock handles in place • Available in singles, see item #10509 • WARNING: When using handle extensions, always avoid contact with electrical power lines or any electrical source
Item # 19202853
Handle Sections, 1 3/8” x 72”
• Anodized spring loaded button-type aluminum sections snap together quickly and will not loosen during use • Also available in singles, see item # 10506 • WARNING: When using handle extensions, always avoid contact with electrical power lines or any electrical source
Item # 19201956
Building Materials
6’ Threaded Aluminum Handle
• Aluminum Construction • The large threads can be combined with similar handles made by others • This item available in singles, see item # 10505 • WARNING: When using handle extensions, always avoid contact with electrical power lines or any electrical source
Item # 19202830
Funny Trowel Adapter • Used with our #9 or #10 handle (sold separately) to turn a concrete finishing trowel into a small fresno • Swivel Clevis Mounting
Item # 19204590
36” x 5” Adjustable Bracket
• Constructed of high-carbon steel • Comes with an Adjustable Threaded Bracket • Can be used with all Marshalltown bull float brackets with two-hole mounting options • Round ends leave less drag marks
concrete broom
• Long wearing 2 3/4” black polypropylene bristles set solidly into a natural lacquered hardwood block • Threaded hole accepts any standard broom handle • Ideal for applying non-slip finish to newly finished concrete surfaces
Item No. Item # 19203562
116
19202831 19202856
DESCRIPTION 24” Broon 36” Broom
Unitis Contractor Supplies
858-332-2133
Concrete Finishing Tools 24” Control Joint Groover • Lightweight aluminum construction • Perfect for cutting long, straight joints with ease • Ideal for use in decorative concrete • Red tipped sight allows for more accurate grooving
Brick Jointer
• Made from high carbon steel • Each end is a different size for making different size joints • 10 1/2” in length
Item No. 19202866 19202865
Item # 19201953
10-1/2” X 4-3/4” Brick Trowel
stainless steel edger
• All steel construction ensures long life • Powder coated finish • 56” length gives enough leverage for even the toughest jobs • Ideal for prying forms and other embedded objects • Features a sharper prying bend to give end-user more leverage
• Comfortable wooden handle • Straight ends • Used to produce a radius at the edge of a concrete slab to prevent the edge from chipping DESCRIPTION 6” x 3” 6” x 4” 6” x 6”
Item # 19202859
56” Pry Bar
• All steel construction ensures long life • Powder coated finish • 56” length gives enough leverage for even the toughest jobs • Ideal for prying forms and other embedded objects • Features a sharper prying bend to give end-user more leverage
Item # 19203234
Item # 19202846
Margin Trowel
• Comfortable wooden handle • Straight ends • Used to produce a radius at the edge of a concrete slab to prevent the edge from chipping Item No. 19202489 19202861 19202857
DESCRIPTION 5” x 2” 5” x 1-1/2” 6” x 2”
6” x 6” Hand Edger
• Heavy gauge blue steel high carbon blade • Sturdy steel mounting • Resilient DuraSoft® handle provides a soft feel, reduces fatigue, and offers excellent durability • Used to produce a radius at the edge of a concrete slab to prevent the edge from chipping Item # 19201954
858-332-2133
• Fully adjustable from 4” to 12” • Made from cast aluminum • Used to stretch mason’s line tight between key course blocks • One pair of stretchers per bag
Item # 19202845
6-1/2” x 2” Masonry Brush • Bristles made of white tampico fiber • 3 1/2” bristles are set in hardwood block • Ideal for broadcasting release for decorative concrete applications
Line Stretchers
6” x 2-3/4” Pointing Trowel • Fully adjustable from 4” to 12” • Made from cast aluminum • Used to stretch mason’s line tight between key course blocks • One pair of stretchers per bag
Building Materials
Item No. 19202850 19202848 19202849
DESCRIPTION 3/8” x 1/2” 1/2” x 5/8”
Item # 19202844
Margin Trowel
• Comfortable wooden handle • Straight ends • Used to produce a radius at the edge of a concrete slab to prevent the edge from chipping Item No. 19202862 19202863 19202864
DESCRIPTION 6-1/2” x 1/4” 6-3/4” x 3/8” 6-3/4” x 1/2”
7” x 3-3/8” Gauging Trowel • Tempered blade; fully ground and polished • Hardwood handle with a steel ferrule • Used for mixing or “gauging” small quantities of quick setting plaster
Item # 19202854
Unitis Contractor Supplies
117
Concrete & Rebar Tools bolt cutter
• For general purpose use, designed for cutting medium steel and soft bolts, nuts, rods, chain, etc. • Maximum hardness of material to be cut: Brinell 370/ Rockwell C42, 85 Tons/Sq. 133 Kg/square mm. • Jaws are made of drop forged high grade alloy tool steel with heat treated, precision cutting edges for longer cutting life. • Comfortable rubber handles for gripping firmly and safely. • Exceeds U.S. Federal specification number GGG-C-740d Type II.
Item No. 26300928 26300934
DESCRIPTION 24” Bolt Cutter 36” Bolt Cutter
stake puller
rebar hickey
• This rugged one piece welded steel construction rebar bedner is 22” long. It is easy to use and store • Jaws It provides enough leverage to bend up to 1/2” rebar
Item No.
DESCRIPTION
26300929 26300930
22” Rebar Hickey 34” Rebar Hickey
Pea Shooter
• Made from domestically produced high-grade steel, laser cut for precision stake pulling • Jaw is 4” deep x 3” wide and 5/8” thick • Base is 3” x 5” and 3/4” thick • Heavy duty for 3/4” or 7/8” diameter stakes
• 24” Nail Driver • Spring-Loaded Drive Shaft • Won’t pinch your hand between the handle and the tube • 2-1/2 lb. Handle on the drive shaft
rebar cutter and bender • Jaws are made of drop forged high grade alloy steel with special heat treatment. • Shear-cut blades cut and bend grade 60 rebar to 90 degree or 180 degree with versatile operation. • Can be bolted to floor or board for easy operation.
Item # 26300935
Hog Rings and Pliers
Galvanized Hog Ring Pliers ease the installation of hog rings to secure tension wire at the bottom of a chain-link fence. Using hog ring pliers frees the other hand to position the tension wire where needed.
Building Materials
Item No. Item # 43606409
Tie Wire Twister
Item # 90304582
• Compact size allows the tool to be used in tight spaces • Safely and easily twists wire bar ties • Durable design
Item # 19207729
118
Pull Tie Wire Tying Tool • Safely and easily twists wire bar ties • Rubber grip handle • Twists most ties with a single pull
40903730 90201029
DESCRIPTION Hog Ring Pliers Hog Rings
Aluminum Tie Wire Reel • Constructed of lightweight aluminum • Fits any standard size belt • Accommodates all types of tie wire
Item # 19207730
Unitis Contractor Supplies
Item # 19207731
858-332-2133
Electrical Wire Marker Books
Wire Nuts
• Five Color-coded models accept from #22 to #8 AWG wire • Fixed, Square-wire spring • No pre-twisting required • UL Listed and CSA Certified • Reusable Item No.
Item No. 25201593 25201594 25201595
10105080 10105081 10105082 10105083 10105084 10105085
DESCRIPTION 1-45 46-90 A-Z
pigtails
• Solid pigtail lead wires are convenient for device grounding applications • Grounding screw offers a unique thread-forming, hole-finding feature plus combination 5/16 in. hex, #2 Phillips, 1/4 in. slotted and #2 Robertson head • Ensures compliance with NEC standards • UL and CUL listed
Item No. size pack 10105093 10105094
7” 10”
Duct Seal (Prest “O” Seal) is used to seal around junction box flashings, service masts, etc. It is heavy mastic, which is flexible and can be pressed into any shape to form a water and airtight seal • UL Listed • Adheres to Most Clean Surfaces • Non Toxic / Asbestos Free • 1 lb Item # 25201596
Tuff-Grip fiberglass fish tape • Non-slip handle and fingertip grooves provide secure grip for added handling comfort • Oversized handle opening accommodates large, gloved hands • Large handle increases stability for better winding control • Durable handle withstands rugged job site conditions Item No.
DESCRIPTION
Conduit Bender with handle
Tuff-grip pro steel fish tape • Non-slip handle and fingertip grooves provide secure grip for added handling comfort • Oversized handle opening accommodates large, gloved hands • Large handle increases stability for better winding control • Durable handle withstands rugged job site conditions Item No.
DESCRIPTION
10108191 10108192
1/8” x 120’ , Steel 1/8” x 240’ , Steel
GOLD FISH TAPE LEADER • For 1/8 inch wide steel fish tapes • Guides steel fish tape around bends in conduit • Handles up to six 10 AWG bare wires • Pulls up to 500 lbs.
Zip Ties
• Secure bags, cords and cables permanently • Approved for outdoor use • Locks tightly - won’t stretch or slide • UV resistant • Color: Black item no.
Item No. 10108194 10108195 10108196
DESCRIPTION 1/2” EMT Conduit Bender 3/4” EMT Conduit Bender 1” EMT Conduit Bender
858-332-2133
DESCRIPTION 1 qt 5 gal
Item # 10107089
100’ Fiberglass with Leader
• Ductile iron construction for added durability • Heat-treated for extra strength • Perfect bends every time • Deeply serrated step helps prevent slippage
• Wax-based formula provides superior lubricity • Dries to a thin, non-conductive film that won’t clog conduit • Won’t dry out -- surface coat forms to control evaporation • Environmentally safe -- non-toxic, non-flammable and non-corrosive 10107640 10107185
Duct Seal
10108193
yellow 77 wire lube
Item No.
50 50
DESCRIPTION Wire-Nut 73B Wire Connector, Orange (Bag of 500) Twister 341 Wire Connector, Tan (Bag of 500) Wing-Nut 451 Wire Connector, Yellow, (Bag of 500) Wing-Nut 452 Wire Connector, Red, (Bag of 500) Wing-Nut 454 Wire Connector, Blue, Bag of 100 Twister 342 Gray (Bag of 250)
Building Materials
• Perforated 1-1/2 inch markers can be separated into half-length sizes • Self-sticking on wire and cable • Non-smear black legend ensures high visibility • Ten pages per booklet, 45 markers per page
90206110 90206111 90206112 90206113
description 4”, 18 LB, 100 pack 8”, 40 LB, 100 pack 11”, 50 LB, 100 pack 14”, 50 LB, 100 pack
Unitis Contractor Supplies
item no. 90206114 90206115 90206116 90206117
description 18”, 120 LB, 50 pack 24”, 175 LB, 50 pack 36”, 175 LB, 50 pack 48”, 175 LB, 50 pack
119
Test & Measurement AC Current Clamp
• Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output • Ideal for current measurement on thick and hard to reach conductors without breaking the circuit • Maximum conductor diameter 178 mm (7 in.) • CAT III 600V safety rating
Item # 22002481
Building Materials
Test Lead Kit
120
• Automatically measures volts ac and volts dc with precise digital resolution • Displays resistance to 1000Ω • Continuity beeper • Compact design with neat probe storage • Rugged enough to withstand a 10-foot (3m) drop • Detachable SlimReach™ probe tips are customized for national electrical standards
Test Lead Set
• One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads • Recommended for µV measurements • CAT II 1000 V, 10 A rating • CAT III 1000 V, CAT IV 600V only with protective cap • One year warranty
Item # 22003637
Handy all-in-one kit that includes : • AC220 SureGrip™ Alligator Clip Set • TP238 SureGrip™ Insulated Test Probe Set • TL222 SureGrip™ Silicone Test Lead Set (right to right) • One year warranty
Item # 22000134
Voltage, Continuity and Current Tester
Industrial Electrician Combo Kit
This new combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. Save over 15% compared with the individual purchase price of all the accessories.
Item # 22000133
AC Voltage Detector
• Non-contact voltage tester for detecting (AC) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform • Tester illuminates, buzzes when AC voltage is detected • Measures AC voltage from 100 to 600V
Item # 22000812
Unitis Contractor Supplies
Item # 38703009
858-332-2133
Test & Measurement Insulation & Continuity Tester
• Insulation tester for testing insulation resistance, volt age, and continuity in electrical installations • Autoranging digital meter with TRMS voltage detection • Dual digital display with analog arc function to replicate response of analog meters • Voltage detection test inhibit function set at 50V for safety
Item # 38703382
• 660 A True RMS clamps for a variety of industrial and commercial environments • Unique TightSight® bottom display makes hard-to-reach measurements convenient • Easy-to-read displays feature large numbers and green glowing backlight • CAT IV rating for maximum safety • Frequency, capacitance, peak, data hold, max/min
858-332-2133
600 amp clamp meter
• Measures up to 600AAC • Non-contact voltage indicator (70V - 600VAC) • Tapered jaws with hook tip • Auto/manual ranging • Data hold • Auto power off • Low battery indicator • CAT III - 600V • 2-year warranty
Building Materials
Item # 10108197
Clamp Meter with True RMS, Capacitance and Frequency
Item # 10108198
Non-Contact Voltage Tester
• Indicates presence of voltage from 40-1000VAC • Visual indication of voltage • Selectable audible indication of voltage • Green LED indicates power on • Low Battery indicator • CAT IV - 1000V
Item # 10108198
Unitis Contractor Supplies
121
Paint Supplies 6 in 1 Painter’s Tool
High carbon steel blade Nylon handle Sharp scraper blade Putty remover Spreader Half round cut-out removes paint from paint rollers Sharp point opens cracks for patching Die cast metal nail setting end to set drywall nails
Item # 23100830
Paint Bucket Grid
• Solvent-Resistant • Uniform Wall Thickness
Item No.
• 4 Sides • Wrapped Galvanized Frame
DESCRIPTION
Item No.
Plastic Bucket 5 Gallon Paint Pail Lid, 5 Gallon Plastic Bucket 1 Gallon
Building Materials
Angled Sash Brush
91201397 30001400
• The Pro Impact brush series is designed for optimal paint pick-up and release. It’s versatile polyester blend filament makes it the perfect choice for interior and exterior paint projects. It is formulated to provide a smooth finish. • Solid round blended polyester filament • For use with all paints • Natural wood handle for a comfortable non-slip grip
Item No. 30001371 30001367 30001368 30001364
DESCRIPTION 5 Gallon 1 Gallon
3 Piece Piece Paint Tray Set Includes: 9” x 3/8” Nap Roller Cover, 4-Wire Frame & Plastic Paint Tray
DESCRIPTION 1-1/2” 2” 2-1/2” 3”
9” Paint Roller Frame • 5-Wire Cage • Nylon Endcaps • Chrome-Plated Steel • Polypropylene Grip w/Reinforced Threads
Item # 14000358
122
• Heavy-Duty Oilboard • Water-Resistant • Reusable • Includes: Numbers 0-9, Letters A-Z, Symbols (Period, Comma, Hyphen, $, &, ¢), and 1 Each Extra Letters (A, E, O, R, S)
Item # 26702189
5 Gallon Bucket
91201389 91201393 91201398
Number/Letter Stencil Kit, 3”
Item # 27001013
Extension Pole, 4’-8’
1-1/4” fiberglass hand and 1” and 7/8” aluminum slider tubes. Die cast metal 3/4” threaded end and rubberized grip.
Item # 30001396
Unitis Contractor Supplies
858-332-2133
Paint Supplies paint roller cover
poly bristle brush
• Smooth Surface • Polyester Material • Phenolic Core
DESCRIPTION
Item No.
9” x 1/4” 9” x 3/8” 9” x 1/2” 9” x 3/4” 9” x 1”
30001372 30001373 30001374 30001369 30001370
chip paint brush
9’ x 12’Plastic Drop Cloth
• Plain Wood Handle • White Pure Bristle • Rust-Resistant Steel Ferrule • Soft Formulation • Fine Touch
Item No. 29701379 29701380 29701377 29701375 29701376
DESCRIPTION 1” 1 1/2” 2” 3” 4”
• Specially formulated to open and unfold easily • Protect against spills, drips, and dust • Uses from lawn and garden to housewares • Thickness: .4 Mil
DESCRIPTION 1” 1 1/2” 2 1/2” 3” 4”
Item # 29801358
5 quart Paint Tray Liner • High Density Polyethylene
Item # 91201363
4” paint tray • Multi-purpose • Reusable • Mini
5 quart Paint Roller Tray • Deepwell tray holds five quarts of paint • Solvent resistant • Fits all standard roller sizes • Large stable base prevents spills or tipping
Item # 91201392
Weenie Roller
4” Fabric Roller Cover With 12” Steel Wire Frame and Threaded Plastic Handle
Item No.
Item # 36902589
858-332-2133
Building Materials
Item No. 30001365 30001366 30001401 30001402 30001399
• For oil, latex paints, stains, varnish, and gesso • Nailed Nickel ferrule • White polyester bristles • Chiseled trim • Wood handle
27007071 27007073 27007072 27007074
DESCRIPTION 4” Weenie Roller Frame 6” Weenie Roller Frame 4” Weenie Roller Cover, 6/pk 6” Weenie Roller Cover, 2/pk
Unitis Contractor Supplies
123
Drywall Supplies 13” x 13” Aluminum Hawk • Made of heavy guage hard-rolled aluminum • Lightweight but durable • Edges have been smoothed & rounded • Wooden handle & sponge callus preventer included
12” Mud Pan
• Made from galvanized steel • Tapered ends and sides with mud-tight seams • All sides are sheared to clean knives easily • Top Length = 14” • Bottom Length = 12 1/2” • Top Width = 4 11/16” • Bottom Width = 3” • Height = 3 5/8”
die-cut sandpaper
• Fits all Marshalltown sanders and similar sanders
Item No. Item # 19201337
Item # 19201328
48” Pole Sander Handle
9 3/8” x 3-1/4” Hand Sander • Lightweight aluminum backing plate bonded to foam pad • DuraSoft® handle provides soft feel • Designed for die-cut or a half sheet sandpaper
• Made from hardwood • Steel end cap for setting nails
19201333 19201331
DESCRIPTION 80 Grit 150 Grit
Pole Sander Head
• Used for sanding drywall joints • Made of reinforced die cast aluminum bonded to a foam rubber pad • Fast, positive clamps lock securely to hold sandpaper in place
Building Materials Item # 19201336
Item # 19201335
Drywall Sanding Sponge
• Abrasive side for wet sanding; sponge side for removing residue • Recommended by compound manufacturers • Virtually dustless drywall sanding • Cleans easily , reusable • Dimensions: 9” L X 4 1/2” W X 1 3/4” H
Item # 19201330
124
Drywall T-Square
• Silver anodized finish with black epoxy paint numerals for long wear and legibility • Notched head, reverse rulings, and stud markings allow for quick, accurate cuts • Aircraft-style rivets secure blades for long term accuracy • Has one arm which measures 16” for use in finding studs • Head is notched which enables cutting a 48” board in one pass while the board is standing on the floor • 47 7/8” long
Item # 19201334
6” Drywall Saw
• Heavy gauge blade with eight teeth per inch • Sharp point to penetrate wallboard easily without drilling • Cuts wallboard, masonite, plywood, and wood • Hardwood handle with steel ferrule • Semi-contoured handle
Item # 19201332
Unitis Contractor Supplies
Item # 19201327
858-332-2133
Drywall Supplies • Formed from one piece of flexible stainless steel • Plastic handle • Blade is set with 103 degree angle that flexes to 90 degrees for finishing corners • Used to embed tape and smooth out the final layer of mud to taped corners
Outside Corner Trowel
• Lightweight tool made from one piece of flexible stainless steel • Resilient DuraSoft® handle with finger guard • Blade is set at an 80 degree angle that flexes during use to 90 degree to form a clean square corner on the outside • Used to embed tape and smooth out the final layer of mud to taped corners
Drywall Joint Knife
• High carbon steel blade, tempered & polished to a mirror finish • Full length tang goes through the rugged solvent resistant nylon handle • Steel handle end for hammering & setting nails
Item No. Item # 19201338
Pro Taping Knife
• Blade made of stainless steel • Tapered blade for corner work • Red plastic handle is securely molded to aluminum backing plate
Item No. 19201344 19201345 19201342 19201343
Item # 19201341
12” x 3” Taping Knife
• Tempered, premium stainless steel blade with aluminum backing plate • Tapered blade for corner work • Resilient DuraSoft® handle provides a soft feel, reduces fatigue, and offers excellent durability
19201339 19201340
Joint Compound
• Versatile performer • Use to finish-texture laminate or skim coat • Good for taping and topping • Ideal for repairing plaster cracks • 1 Gallon
DESCRIPTION Pro Taping Knife, 6” x 3” Pro Taping Knife, 8” x 3” Pro Taping Knife, 10” x 3” Pro Taping Knife, 12” x 3”
7/16” x 30” Drywall Mud Mixer • 30-Inch shaft • 1/2-Inch drill chuck required • Cast aluminum blades • Steel shaft • Rounded bottom
Item # 38202842
858-332-2133
DESCRIPTION Drywall Joint Knife, 4” Drywall Joint Knife, 6”
OTHER SIZES AVAILABLE
Item # 19200534
Drywall Tape
• Drywall joint tape • Fiberglass mesh for stronger joints • Eliminates blisters and bubbles • 1-7/8” x 300’ • Yellow • Carded
Building Materials
Inside Corner Trowel
Item # 29401329
Paper Joint Tape
• 2” x 500’ • Contractor grade • Cross fiber paper tape • Use with joint compounds in reinforcing joints and corners in gypsum drywall interiors
Item # 17801325
Unitis Contractor Supplies
Item # 17801326
125
Erosion Control / SWPPP straw wattle (fiber roll) • 9” x 25’ • Stabilizes slopes by slowing, spreading and filtering overland water flow • Snake around storm drains to protect sediment pollution • Installed along sidewalks on the bare lot side, they prevent sediment from washing into gutters
Item # 90801317
Jute netting
• 4’ x 225’ Roll • Need 1 Box (1,00 staples) per 4 rolls
Item No.
DESCRIPTION
Wattle stakes
• 1” x 1” x 18” • 50/Bundle • 10 foot cord, 115 volts,1/6-horsepower motor • Ideal for Staking Wattles
Item # 91301318
sand bags / gravel bags
• Woven poly sand bags are flexible, durable and tear resistant • Top tabclosure
Item No.
DESCRIPTION
Building Materials
90803341 Jute Mesh 90803579 Staples for Jute Mesh
90803533 Sand Bag 90803535 Gravel Bag 90801552 Empty Sand Bag
Silt Fence Roll
wire reinforced Silt Fence
• 3’ x 100’ roll • Includes wood stakes • Color: Black
Item # 90801668
Safety Fence • 4’ x 100’ • Orange • AKA Snow Fence
Item # 90300871
126
• Wire Reinforced without stakes 42” x 100’ • Color: Black • Uses T-Posts for Installation
Item # 90800919
Safety Fence - Heavy Duty • 4’ X 100 • Orange • Chain Link type
Item # 90302318
Unitis Contractor Supplies
858-332-2133
Erosion Control / SWPPP Post TT• 5’Post T-Post / Fence Post
Post Driver Driver Post • Handles are angled for best control and more ergonomic
•• 5’ T-Post / Fence Post Green Post •• Green AnchorPost Plate • Anchor Plate
• Handles angled for best control and more ergonomic gripping are position •gripping All-steel position construction for rugged use and long life •• All-steel construction for rugged use long strength life High-quality welded construction for and superior •• High-quality construction for superior strength 2 1/2” Insidewelded diameter • 2 1/2” Inside diameter
Item # 90300872 Item # 90300872
Item # 23801940 Item #
Pro Wattle Wattle Pro • Slows and spreads flow
Curb Inlet Inlet Guard Guard Curb • Fast installation
Significantly undercutting •• Spreads and less slows flow • more text
Lower total costs •• Fast installation Lightweight, easy to transport •• Lower total costs Long life, UVeasy stable •• Lightweight, to transport Modules to fit any length •• Long life, overlap UV stable One sizeoverlap to ordertoand stock •• Modules fit any length Stands construction •• One sizeuptotoorder and stocksite abuse One installation per projectsite abuse •• Stands up to construction Above street, easy to clean •• One installation per project • Above street, easy to clean
Item # 90805199
Dewatering Bag • Detains both oil and sediment, offering a Dewatering Bag combination of benefits not available in alternative
Rock Sock
• Use for curb inlet protection • Approx 8” x 3’
• Detains both oil and sediment, offering a dewatering bags. combination of benefits not available in alternative • Standard and custom sizes available. dewatering bags. • Accommodates up to 4” discharge hose. • Standard and custom sizes available. • Accommodates up to 4” discharge hose.
Item No.
Building Materials
Item # 90804202
DESCRIPTION
36602482 x 48” Item No. 36”DESCRIPTION 36602496 72” x 72” 36602482 36” X 48” 36602496 72” x 72”
Item # 99905752
visqueen
• Polyethylene Sheeting is a heavy-duty,general-purpose plastic film that is ideal for use in covering stockpiles of dirt, erosion control, and covering equipment • Use as a vapor barrier for concrete and between drywall and insulation • Can be used to cover a crawl space, under wood floors and in various other covering applications Item No. 90303440 90301962 90301993 90301957 90301406 90301408 90301749 90301407
MIL size color 4 10’ x 25’ Clear 4 4’ x 200’ Clear 2 12’ x 200’ Clear 4 20’ x 100’ Clear 6 20’ x 100’ Clear 6 20’ x 100’ Black 10 20’ x 100’ Clear 10 20’ x 100’ Black
858-332-2133
Unitis Contractor Supplies
127
Concrete & Rebar Products Concrete Form Tubes
• Concrete form tubes are lightweight, single-use forms for a variety of concrete column applications: • Home or deck pilings • Goal posts • Fence posts • Mailboxes or lamps • Footings • Use below grade and up to 3’ above grade • Form Tubes are engineered from multiple layers of high-quality fiber laminated with an adhesive, with a special coating which resists moisture and facilitates even curing
Rebar
• Conforms to ASTM A615 • Available in Grade 40 and Grade 60
OTHER SIZES AVAILABLE
Item No. 27502348 27502347 27502349 27502315 27502350
DESCRIPTION 8” x 4’ 10” x 4’ 12” x 4’ 18” x 12’ 24” x 12’
Rebar Caps
• OSHA Approval #C1703AG. • Meets Federal OSHA Spec. • Fits Rebar #3-#7.
Item No. size 90302214 90302234 90302215 90302218
3/8” x 20’ 3/8” x 20’ 1/2” x 20’ 5/8” x 20’
type
grade
# 3 # 3 # 4 #5
40 60 60 60
Tie Wire • 16 Gauge • 3.5 LB roll
Building Materials Item # 90300913
Hank Wire
• 45” Galvanized Hank Wire • 16 Gauge ( Hanger Wire ) • 100 Per Bundle
Item # 90100586
Flat Steel Stakes
• Ideal for concrete forms and other jobs • 3/8 x 24”
OTHER SIZES AVAILABLE
Item # 90304433
128
Item # 90300915
Unitis Contractor Supplies
858-332-2133
Concrete & Rebar Products Expansion Joint
Snap Caps
A rigid, plastic expansion cap with a removable top, VoidCap can be placed over all types of expansion joint. After the concrete is poured the top of the VoidCap is level with the surface of the slab. After the surface of the concrete is finished, the top portion of the VoidCap can be removed leaving a void 1/2” deep. Any type of self-leveling caulk can be placed into the void sealing the joint from surface moisture.
OTHER SIZES AVAILABLE
DESCRIPTION 3/8” x 3” x 10’ 3/8” x 5” x 10’ 1/2” x 3” x 10’ 1/2” x 3-1/2” x 10’ 1/2” x 4” x 10’ 1/2” x 5” x 10’
Wood Stakes • Concrete Form Stakes • 50 per Bundle
OTHER SIZES AVAILABLE
Item No. 91302577 91302578 91302579
Item No. 90105388 90305387
DESCRIPTION 3/8” x 10’ 1/2”x 10’
Concrete Dobies with wire • Used to Position Rebar • Holds rebar in position as concrete hardens
OTHER SIZES AVAILABLE
DESCRIPTION 1” x 3” x 24” 1” x 3” x 30” 1” x 3” x 36”
Item No. 90302216 90302217
DESCRIPTION
Building Materials
Item No. 90103736 90103737 90103732 90103733 90103734 90103735
2” Cube 3” Cube
Jobsite Delivery Available 858-332-2133
Unitis Contractor Supplies
129
Plywood & Lumber
We
Call us
sto
ck l
Today with you requirements CDX plywood
Item No.
DESCRIPTION Item No.
Building Materials
1/2” x 4’ x 8’ 3/4” x 4’ x 8’
91304672
• Used for shimming doors, windows, cabinets and countertops • Durable • Economical
size color pack 1/16” 1/8” 1/4”
Blue Red Black
100 100 100
composite shims • Used for shimming doors, windows, cabinets and countertops • 100% Usable, Insect and Rot Proof • Split/Splinter/Swell/Twist Resistant
Item # 91301656
130
DESCRIPTION 3/4” x 4’ x 8’
pine shims
• Used for shimming doors, windows, cabinets and countertops • Durable • Economical
Item No.
r!
• For use where fire rating is required • Pre-Sanded and Ready to Finish
horseshoe shims
91302872 91302873 91306540
be
Fire Rated ACX plywood
• Good general purpose sheets for many applications • resistant to splitting, puncturing and impact damage
91301896 91301695
um
Item # 91301700
cedar shims • Use where larger shimming is required • 100% Natural Cedar
plastic shims • Heavy Duty • 20 Shims per pack
Item # 91302682
Unitis Contractor Supplies
Item # 32601783
858-332-2133
Radius Systems
Building Materials
Cast In Place
Surface Applied
Cast In Place Replaceable
ADA Tiles - Truncated Domes
Proud Distributor Of 858-332-2133
Unitis Contractor Supplies
131
Geotextiles / Filter Fabric
TerraTex TerraTex Geotextiles are designed and manufactured for many construction applications. They perform the three primary functions of a geotextile: • Separation (separating the native subgrade from an aggregate layer) • Reinforcement (reinforcing an area by distributing weight over a wider area)
• Filtration (retaining soil while allowing the passage of water)
woven Geotextiles
TerraTex Woven Geotextiles are made of polypropylene filaments which are formed into a stable network such that they retain their relative position. A range of geotextiles is offered to meet the requirements of various applications. Compare to Mirafi 500X & 600X TerraTex GS: Industry-standard geotextile that performs the functions of separation and stabilization in marginal soil conditions. Grab tensile strength of 200 lbs. TerraTex HD:Grab tensile strength of 315 lbs. Meets specifications set forth by AASHTO M288 for stabilization.
Building Materials
property GS
HD
Grab Tensile Strength, lbs. 200 ASTM D-4632 (warp/ fill) Elongation (%) Minimum 15 ASTM D-4632 Wide Width Tensile N/A (lbs./ in.) ASTM D-4595 Wide Width Elongation (%) N/A ASTM D-4595 Trapezoid Tear (lbs.) 75 ASTM D-4533 Mullen Burst (psi) 400 ASTM D-3786 Puncture Strength (lbs.) 90 ASTM D-4833
315
property GS
15 175 15/8 120 600 120
HD
Permittivity (1/sec.) 0.05 0.05 ASTM D-4491 Water Flow Rate (g/m/sf) 5 4 ASTM D-4497 Percent Open Area <1 <1 CWP-22125 UV Resistance 70 70 (% @ 500 hrs) ASTM D-4355 AOS (US Std. Sieve) 50 40 ASTM D-4751 (max. avg. roll value) Width (ft) 12.5 12.5 Length (ft) 432 360 Area (square feet) 5400 4500 Approximate Weight (lbs.) 225 235
Nonwoven Geotextiles
TerraTex Nonwoven Geotextiles have a random, three dimensional pore structure and are highly water permeable as is necessary in many geotextile end uses. A range of fabric weights is offered to meet the requirements of various applications. Compare to Mirafi 140N and 140NC TerraTex SD & N04.5: Extra-strength drainage geotextiles designed for applications requiring high water permeability and puncture resistance.
property sd no4.5 Tensile Strength, lbs. 100 ASTM D-4632 Elongation (%) Minimum 50 ASTM D-4632 Trapezoid Tear (lbs.) 50 ASTM D-4533 Mullen Burst (PSI) 215 ASTM D-3786 Puncture Strength (lbs.) 65 ASTM D-4833 Premeability (cm/ sec.) 0.2 ASTM D-4491 Permittivity (1/sec.) 2 ASTM D-4491
120 50 50 240 70 0.3 1.8
Item No. model compare to: 90102323 90102714
132
GS HD
Mirafi 500X Mirafi 600X
property sd no4.5 Water Flow Rate (g/m/sf) 140 120 ASTM D-4491 UV Resistance 70 70 (% @ 500 hrs.) ASTM D-4355 AOS (US Std. Sieve) 70 70 ASTM D-4751 (max. avg. roll value) Asphalt Retention (g/ sy) N/A N/A ASTM D-6140 Width (ft.) 12.5 12.5/15 Length (ft.) 360 360 Area (square feet) 500 500 Approximate Weight (lbs.) 160 190
Size 12.5’ x 432’ 12.5’ x 360’
Item No. model compare to: 90102715 90102716
Unitis Contractor Supplies
N04.5 SD
Mirafi 140N Mirafi 140NC
Size 12.5’ x 360’ 12.5’ x 360’
858-332-2133
Geogrid
Biaxial Geogrids - terragrid Unbalanced (rectangular) aperture, punched-and-stretched, polypropyleneylenebiaxial geogrids have been the standard in the United States since their introduction in the early 1980s. With nearly 30 years of in-the-ground performance history and cost-reducing results, unbalanced biaxial geogrids remain the U.S. choice for trafficked structure applications. Hanes Geo Components’ TerraGrid RX geogrids provide the option to continue this well-proven practice. The combination of long-established mechanical, geometrical, and durability characteristics enables TerraGrid RX geogrids to significantly reduce aggregate movement. The result…aggregate layers with effective load-distribution capability…and industry-proven benefits: • Thinner aggregate layers with lower in-place cost • Reduced life-cycle costs using conventional aggregate layer thicknesses • Optimized structure longevity and economy
Item No. model compare to: 90106096
RX1200
Tensar TRIAX Tx7
Building Materials
All TerraGrid punched-and-stretched geogrids are manufactured at a single, state-ofthe-art facility. Because Hanes Geo uses this single source, we can and do track and document product from the raw resin phase, through production, through warehousing, all the way to delivery at our customer’s site. This chain of custody is critical to ensuring that delivered geogrids meet site-specific specifications.
Size 12.8’ x 246’
Aggregate Layer Biaxial Geogrid
Subgrade
858-332-2133
Unitis Contractor Supplies
133
PROUD MEMBERS OF...
Building Materials
134
Unitis Contractor Supplies
858-332-2133