Buyers Guide edition 2
ASSEMBLY - automotive - construction - INDUSTRIAL - HEAVY INDUSTRIAL mining - STONE & masonry - SURFACE PREPARATION
1800 62 72 82 email: sales@iatps.com.au
[INDUSTRIAL] SHINANO
[AIR TOOLS]
SHINANO Industrial Air Tools - Over 100 quality industrial models all made in Japan.
PRODUCTS AVAILABLE: ‹‹ Air Hammers ‹‹ Belt Sanders ‹‹ Die Grinders ‹‹ Disc Grinders ‹‹ Disc Sanders ‹‹ Drills ‹‹ Geared Sanders ‹‹ Impact Drivers ‹‹ Impact Wrenches ‹‹ Micro Mini Ratchet Wrenches ‹‹ Mini Grinders ‹‹ Needle Scaler ‹‹ Nibbler ‹‹ Orbital Sanders ‹‹ Panel Cutters ‹‹ Polishers ‹‹ Punch/Flange Tool ‹‹ Random Orbital Sanders ‹‹ Saws ‹‹ Screwdrivers ‹‹ Sealant Cutter ‹‹ Shears ‹‹ Spotweld End Mills ‹‹ Triangular Sander ‹‹ Trimmer/Router ‹‹ Wet Sanders Ask for a full range brochure.
TOOL TYPE
MODEL NO
SIZE
FREE SPEED
LENGTH
WEIGHT
GRINDER - ANGLE
SI-2505L
125mm disc
9000 rpm
224mm
1.92kg
100mm & 180mm models also available.
GRINDER - DIE
SI-2002
1/4” collett
25000 rpm
151mm
0.38kg
6 other straight & right angle models available.
NEEDLE SCALER
SI-4150
3500bpm
333mm
2.06kg
Takes 12 x 3mm ø needles.
SANDERS - BELT
SI-2700
10 x 330mm belts
1100m/min
282mm
0.82kg
20 & 30mm wide belt models available.
SANDERS - DISC
SI-2201-R
50mm disc
17000 rpm
144mm
0.5kg
Models available up to 180mm dia.
SANDERS - PALM GRIP
SI-3102
75mm pad
12000 rpm
SCREWDRIVER
SI-1166A
1/4” HEX. DR.
2000 rpm
WRENCHES - IMPACT
SI-1480
WRENCHES - RATCHET
MAX TORQUE
0.54kg
50-150mm models in the range.
5Nm / 3.7ft/lb
207mm
1.18kg
Available as straight or pistol grip up to 9Nm
1/2” SQ. DR.
800Nm / 590ft/lb
208mm
2.37kg
SI-1482 model has 50mm Ext Anvil.
SI-1440
1/2” SQ. DR.
850Nm / 627ft/lb
188mm
2.12kg
SI-1442 model has 50mm Ext Anvil.
SI-1540
3/4” SQ. DR.
2000Nm / 1475ft/lb
240mm
3.4kg
SI-1546T model has 150mm Ext Anvil.
SI-1108A
3/8” SQ. DR.
300 rpm
30Nm / 22ft/lb
125mm
0.4kg
SI-1107A - 1/4” SQ. DR. Model.
SI-1320
3/8” SQ. DR.
160 rpm
80Nm / 59ft/lb
265mm
1.16kg
Many 3/8” & 1/2” models in range.
[INDUSTRIAL / automotive] KUANI
[HEAVY DUTY IMPACT WRENCHES]
KI-859 SUPER DUTY
KI-30 SUPER DUTY
1/2” SQ. DR. IMPACT WRENCH Twin Hammer Handle Exhaust
3/4” SQ. DR. IMPACT WRENCH New Patented Twin Hammer Handle Exhaust
KI-45 SUPER DUTY
KI-38P SUPER DUTY
1” SQ. DR. IMPACT WRENCH New Patented Twin Hammer
1” SQ. DR. PISTOL GRIP IMPACT WRENCH New Patented Twin Hammer
MODEL No
SIZE
MAX TORQUE
ULTIMATE UNDO TORQUE
WEIGHT
EXTENDED ANVIL ALSO AVAILABLE
TYPE
KI-859
1/2” SQ. DR
400 ft/lbs
550 ft/lbs
2.80kg
2”
PISTOL GRIP
KI-8571
1/2” SQ. DR
500 ft/lbs
650 ft/lbs
2.81kg
2”
PISTOL GRIP
KI-23
3/4” SQ. DR
750 ft/lbs
950 ft/lbs
4.55kg
6”
PISTOL GRIP
KI-30
3/4” SQ. DR
1100 ft/lbs
-
5.60kg
6”
PISTOL GRIP
KI-38
1” SQ. DR
1800 ft/lbs
-
10.62kg
6”
‘D’ HANDLE
KI-38P
1” SQ. DR
1800 ft/lbs
-
10.62kg
6”
PISTOL GRIP
KI-45
1” SQ. DR
2500 ft/lbs
-
15.30kg
8”
‘D’ HANDLE
KI-55
1 1/2” SQ. DR
3000 ft/lbs
-
19.70kg
8”
‘D’ HANDLE
Other models also available. Ask for a full range leaflet. Made in Taiwan
[automotive] ALLIANCE TOOL TYPE
MODEL No
SIZE
FREE SPEED
PISTOL DRILL
AL-1203
10mm Chuck
SCREWDRIVER
AL-1215
1/4” HEX. DR
DIE GRINDER
AL-1320
ANGLE GRINDERS
[AIR TOOLS] TORQUE
WEIGHT
1800rpm
-
1.2kg
Straight and angle models available
800rpm
16Nm
1.23kg
Adjustable clutch - reversible
MEDIUM
21000rpm
-
0.66kg
Mini, Angle & Extended models available
AL-1331
100mm DISC
10000rpm
-
1.3kg
50mm & 125mm models also available
AL-7047L
180mm DISC
7600rpm
-
3.1kg
RECIPROCATING SAW
AL-1781
10000spm
-
0.55kg
MINI RATCHET WRENCH
AL-2315
3/8” SQ. DR.
250rpm
25ft/lb
0.51kg
1/4” model also available (AL-2314)
IMPACT WRENCHES
AL-2359
1/2” SQ. DR.
-
Forward 400, Reverse 500ft/lb
2.8kg
2” Ext. Anvil model (AL-2359-2)
-
Forward 750, Reverse 950ft/lb
9.66kg
6” Ext. Anvil model (AL-2423-6)
1.3kg
Other models available
AL-2423
3/4” SQ. DR.
RIVETER
AL-3101
3/16” CAPACITY
STAPLER
AT-3302
Takes 800 series staples, 6mm - 16mm capacity
Other models available
NAILER
AT-3340
Takes C1 series brads, 10mm - 32mm capacity
Other models available
AL-1203 REVERSIBLE PISTOL DRILL
AL-1215 PISTOL SCREWDRIVER
AL-3101 RIVETER
AL-1320 DIE GRINDER
AL-1331 ANGLE GRINDER
AL-1781 RECIPROCATING SAW
AL-2315 RATCHET WRENCH
AL-2359 IMPACT WRENCH
AT-3302 STAPLER
AT-3340 NAILER
Over 70 models in the range. Made in Taiwan
‹‹ Adjustable Clutch Screwdrivers ‹‹Air Hammers ‹‹Air Riveters ‹‹Air Caulking Gun ‹‹Angle Grinders ‹‹Auto Bump Hammer ‹‹Belt Sander ‹‹Blow Guns ‹‹Bump Nailer ‹‹Cut-Off Grinder ‹‹Die Grinders Ask for a full range brochure.
‹‹Disc Sander ‹‹Drills ‹‹Dual Action Sanders ‹‹Engraving Pen ‹‹Gear Driven Sanders/Polishers ‹‹Impact Screwdriver ‹‹Impact Wrenches ‹‹Nailers ‹‹Needle Scaler ‹‹Nibbler ‹‹Orbital Sander
‹‹Punch/Flange Tool ‹‹Ratchet Wrenches ‹‹Saws ‹‹Shears ‹‹Smart Eraser ‹‹Spray Guns ‹‹Staplers ‹‹Straight Line Sander ‹‹Tyre Buff ‹‹Tyre Inflaters ‹‹Vacuum /Blower
[HEAVY INDUSTRIAL] KETT
[shears and nibblers]
Kett Tool Co have a large range of Shears and Nibblers for many industries. KETT is based in Ohio in the US, and build portable cutting tools from small to large capacity as the illustrated model SHN Nibbler shows. CODE
MODEL
TYPE
CUTTING CAPACITY
LENGTH
WEIGHT
POWER
MAX SPEED
MIN. RADIUS
AN 2000
AMN
PNEUMATIC
14ga. mild steel / 16ga. stainless
250mm
3.18kg
1HP
1470mm/min
25mm
AN 6000
AEHN
PNEUMATIC
3/16” mild steel / 10ga. stainless
315mm
9.53kg
100psi
1000mm/min
200mm
AN 7000
SHN
ELECTRIC
3/8” mild steel / 1/4” stainless
370mm
18.14kg
3HP
860mm/min
305mm
TOP CAT
[Model SHN] Big enough to cut heavy stuff – up to 3/8” mild steel – without adding heat to the work surface. This 3HP powerhouse cuts through metal all day long, yet at 18kg, can go where other metal cutters can’t.
[SUPER HEAVY DUTY AIR TOOLS FOR HEAVY INDUSTRY]
Top Cat air tools are built for hard work, long life and safe operation. They are designed and built in the United States for heavy industry, including foundries, shipyards, railway construction and fabrication shops.
VERTICAL GRINDER 54VK
MODEL
TYPE
POWER OUTPUT
WEIGHT
WORKING AIR CONSUMPTION
RATED SPEED
WHEEL CAPACITY
54VK
VERTICAL GRINDER
3.0 HP/2250W
4.0kg
45cfm
6000rpm
230mm 230mm
520RA
ANGLE GRINDER
2.0HP/1500W
3.6kg
40cfm
6000rpm
66VK
VERTICAL GRINDER
4.0HP/3000W
5.0kg
50cfm
6000rpm
230mm
65VBW
AIR SAW
4.0HP/3000W
12.0kg
50cfm
6000rpm
Up to 360mm
TC20
CHIPPING HAMMER
-
6.1kg
25cfm
2400bpm
Bore and Stroke - 29mm x 51mm
TC40
CHIPPING HAMMER
-
7.0kg
25cfm
1500bpm
Bore and Stroke - 28mm x 102mm
Max Depth of cut - 109mm
ABRASIVE AIR SAW 65VBW
ANGLE GRINDER
CHIPPING HAMMER
520RA
TC40
[STONE & MASONRY TOOLS] SHINANO & TOP CAT
[WET TOOLS]
ANGLE WET SANDER
ANGLE WET SANDER
ANGLE WET GRINDER
SI-2322WR-E
SI-2351W
SI-2515LA-W
WET CIRCULAR SAW 662VBW
[MASONRY TOOLS] Specialist water feed grinders, sanders and saws for the stone, glass and marble industries. MODEL
BRAND
TYPE
SPINDLE THREAD
FREE SPEED
AIR CONSUMPTION
WEIGHT
DISC SIZE
SI-2322WR-E
SHINANO
SANDER
M14 x 2.0
5000rpm
-
1.30kg
80ø
SI-2351W
SHINANO
SANDER
5/8” - 11
4500rpm
21cfm
2.47kg
Up to 180mm
SI-2515LA-W
SHINANO
GRINDER
M14 x 2.0
10000rpm
15cfm
1.80kg
125 x 6 x 22CH
44BW
TOP CAT
SAW
-
11000rpm
25cfm
1.40kg
100mm
Max depth of cut - 30mm
662VBW
TOP CAT
SAW
-
3300rpm
60cfm
up to 14kg
up to 460mm
Saws available from 6”-14”
AIR SAW 44BW Also available with wet attachment
[SURFACE PREPARATION] Trelawny
[LONG REACH SCALERS]
[NEEDLE & CHISEL SCALERS]
MADE IN UK Applications include: Scraping concrete decks, removing floor tiles and taking up old roof membranes. An ideal tool for paint shops. Trelawny Long Reach Scalers are specifically designed to reduce the risk of backache and to extend their use into previously inaccessible areas. Available in 2ft, 4ft, 5ft and 6ft lengths, Steel and aluminium.
[SCALING/SCABBLING HAMMERS]
Needle Scalers provide a thorough and effective means of removing coatings, corrosion and other accumulated materials as well as texturing concrete. Chisel Scalers are used for brick raking, chipping and splitting applications. These Needle Scalers convert to Chisel Scalers in seconds.
Available in single or triple head models and are used for surface preparation and removing of coatings and corrosion from steel and concrete - where the application is more demanding.
[MULTI-HEADED FLOOR SCABBLER] For use on concrete, the Trelawny MHS 11 Floor Scabbler was designed in association with senior construction engineers for removing concrete laitance while reducing the damage to the substrate. This prevents the ingress of water which freezes and can cause cracking of the substrate. Optional cruciform heads are available for material reduction with a smoother finish.
MODEL
PART NO
NEEDLE QTY
WEIGHT
LENGTH
B.P.M
AIR CONS.
MODEL
PART NO
WEIGHT
LENGTH
B.P.M
AIR CONS.
MODEL
PART NO
WEIGHT
LENGTH
HEIGHT
WIDTH
CUTTING WIDTH
B.P.M
AIR CONS.
1B Needle Scaler
111.1000
12 x 3mm
1.7kg
343mm
3800
1.4 l/s 3 cfm
Single Scabbler including 1 piece cruciform head
151.5200
2.6kg
460mm
2400
3.1l/s 6.5 cfm
MHS11
159.6000
70kg
340mm
1290mm
285mm
250mm
11 x 2200
26 l/s 55 cfm
2B Needle Scaler
121.2000
19 x 3mm
2.6kg
375mm
3000
2.6 l/s 5.5 cfm
Triple Scabbler including 1 piece cruciform head
153.5200
5.3kg
460mm
3x 2400
6.8 l/s 14.3 cfm
MHS11 Shrouded
11 x 2200
26 l/s 55cfm
2BPG Needle Scaler
123.2100
19 x 3mm
2.6kg
315mm
3000
2.6 l/s 5.5 cfm
3B Needle Scaler
131.3000
28 x 3mm
4.5kg
465mm
2200
3.8 l/s 8 cfm
3BPG Needle Scaler
133.3100
28 x 3mm
3.8kg
342mm
2200
3.8 l/s 8 cfm
4B Needle Scaler
141.4000
35 x 4mm
5.9kg
482mm
2200
4 l/s 8.5 cfm
[POLE SCABBLERS & COMPACTORS]
159.6001
–
340mm
1290mm
285mm
250mm
[FLOOR PLANERS] A robust heavy duty floor scarifying machine, designed for heavier applications such as reducing concrete, concrete grooving laitance removal or keying ready for resurfacing. The motor has been positioned to place the weight directly above the cutter drum for a firm ground holding cut.
POLE SCABBLERS For deep concrete dressing and scabbling of small areas such as steps and ledges. POLE COMPACTORS Same tool as the scabbler but with interchangeable tamper feet for filler tamping in and around deep foundations and utility poles. Range of compactor feet available. All models : 1250mm or 1392mm long : 1100 b.p.m : use 25cfm air consumption
MODEL
PART NO
WORKING WIDTH
WEIGHT
LENGTH
WIDTH
HEIGHT
CUTTER SPEED
POWER
VOLTAGE
TFP250 Petrol
325.2000
250mm
122kg
1041mm
432mm
940mm
2512
8.0HP
N/A
TFP250 Electric
325.2006
250mm
127kg
1041mm
432mm
940mm
1650
6.0kw
380-440v
[CONSTRUCTION]
[FLOOR GRINDERS] The TCG500 is a concrete grinder with dual counter rotating discs, designed for:< Removing high spots from concrete surfaces. < Grinding Terrazzo floor tiles. < Removing a build up of coatings and debris from floors. < Texturing floors for non-skid applications. Trelawny floor grinders come pneumatic, petrol or electric and range from 3HP up to 11HP. Cutting width is 590mm disc size is 2 x 250mm.
[ROCK DRILLS] SPECIFICATIONS
[PAVING BREAKERS]
Model
IAT-9
Net Weight
3.6kg
Overall Length
368mm
Shank
19.0x95mm
Piston Dia.
31.75mm
Piston Stroke
35mm
MODEL
CUTTING WIDTH
DISC SIZE
POWER
5.5HP Petrol
590mm
2x250mm
5.5HP
MODEL
11HP Petrol
590mm
2x250mm
11HP
IAT0555
9.0kg
550mm
22x82mm
40mm
88mm
1500
20.8 l/s / 44 cfm
100-115v Electric
590mm
2x250mm
3.0HP
IAT1210
18kg
533mm
25x108mm
48mm
124mm
1450
22.7 l/s / 48 cfm
Air Consumption
10.38 l/s 22 cfm
200-240v Electric
590mm
2x250mm
3.0HP
IAT1230
29kg
710mm
32x160mm
60mm
140mm
1350
30 l/s / 64 cfm
Impact Frequency
3400bpm
IAT1170
36kg
660mm
32x160mm
57mm
165mm
1200
41 l/s / 88 cfm
Rotation Stop
YES
IAT1240
42kg
720mm
32x160mm
67mm
160mm
1250
41 l/s / 88cfm
Hose Size
12.7mm
380-440v Electric
590mm
2x250mm
7.0HP
WEIGHT
OVERALL LENGTH
SHANK
PISTON DIA.
STROKE
Ergo models available on request. Range of chisels available for these tools.
B.P.M
AIR CONSUMPTION
[construction] ALLIANCE
[12V & 24V MINI AIR COMPRESSORS] Reduce lost time from on-site tyre troubles with a compact Alliance heavy-duty 12 or 24 volt D.C Air Compressor. Small enough to mount under the seat of a motor grader or on the mudguard of a tractor, these powerful little compressors can get your tyres back to the correct pressure without that long wait for the service truck. Alliance D.C. Air Compressors have also been used for braking systems on small trucks and utes, automatic lubrication systems and pneumatic gear changes. Compressor Type
Voltage
Max. Working Pressure
Normal Working Pressure
Piston Displacement
Motor Power
Full Load Current
1041
12v
100psi
85psi
2.55 cfm
0.50hp
40 amps
1043
24v
100psi
85psi
2.55cfm
0.50hp
[PNEUMATIC BOLT CUTTER]
[SABRE SAW]
These versatile, air operated cutters are designed for fast, economical, general purpose cutting of soft, medium and hard metals and plastics. Features fast operation, choice of cutter heads, portable, economical, finger pressure control, no exhaust shock. No Hydraulic pump required. Use 80 to 120 psi air pressure (6kg/cm2 to 8kg/cm2)
The ideal tool for cutting up, down, straight or tight curves in various materials such as sheet metal, plastics, fibreglass and plywood. Can be used in sensitive areas where other tools present hazards and in tight areas. Made in Taiwan
IAT - 66004K SPECIFICATIONS Steel Low Carbon to 90,000lb (40,824kg) Tensile Rockwell 15
Steel High Carbon to 130,000lb (58,968kg) Tensile Rockwell 30
Steel High Carbon to 180,000lb (81,648kg) Tensile Rockwell 40
Reinforcing Bars to 75,000lb (34,020kg) Tensile to grade 75
Stainless Steel to 180,000lb (81,648kg) Tensile Rockwell 40
Chain High Alloy to 180,000lb (81,648kg) Tensile Rockwell 40
Aluminium Brass Copper Rod Bar
Free Speed:
1200BPM
Stroke Length:
45mm
Avg. Air Consumption:
0.17m3/min
Weight:
2.5kg
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Length:
400mm
9290C
1/2
13
1/2
13
3/8
10
3/8
10
3/8
10
3/8
10
1/2
13
Width:
41mm
9290NE
1/2
13
1/2
13
3/8
10
Do not cut
Do not cut
1/2
13
Height:
134mm
20amps
Do not cut
Assembled in Australia
[CONSTRUCTION / MINING] SPITZNAS
[AIR TOOLS FOR USE IN UNDERGROUND MINING]
Spitznas has been dedicated to a tradition of producing quality tools and equipment designed to meet the needs of construction, mining, marine and manufacturing industries for over 100 years. All tools for underground mining have housing made from special cast steels or zinc alloys so as to eliminate the use of aluminium in underground mines. They are also powerful, rugged, silenced and designed to function efficiently at lower pressures to save energy. Made in Germany. Other tools in Spitznas range include: *Angle Grinders *Vertical Grinders *Die Grinders *Straight Grinders * Chain Saws *Reciprocating Saws *Sabre Saws *Pallet Expander *Axial Fans *Core Drill Units *Drill & Drive Units *Motors.
[BAND SAWS]
[IMPACT WRENCHES]
For cutting: Aluminium, Stainless Steel, Plastics, Non-ferrous Metals, Steel, Brass, Castings, Timber.
Blade Speed free at 4 bar
Air Consumption
Overall Length
Height with Motor
Width
mm
kW
m/min
m/min
m3/min
mm
mm
mm
kg
mm
120
120 x 120
0.7
65
50
0.9
550
240
220
9.5
13 x 0.65
Weight
Weight
Sound Level
Nm
m3/min
mm
mm
m/s2
dB(A)
mm
kg
5 6032 0010
120
180 x 120
0.7
65
50
0.9
630
240
220
9.9
13 x 0.65
M 20
610
1/2”
0.32
36.0
160
2.6
90
R 1/4’ f
10
3.6
6 6031 0010
180
180 x 180
1.0
90
73
1.2
730
290
285
13.0
16 x 0.65
6 1316 0020
M30
1350
3/4”
1.40
45.0
222
4.5
96
Rd 32x1/8a
13
6.4
6 1316 0010
M30
1350
1”
1.40
45.0
228
4.5
96
Rd 32x1/8”m
13
6.5
[PNEUMATIC CHAINSAW] Industrial Air Tools have a range of pneumatic chainsaws for the following industries: *Special Coal Mining Model *Underground Mining *Coal Cutting *PVC Pipe *Marine Applications – Particularly Underwater *Timber Mills *Building & Construction *Soft Stone Cutting and more...
Hose I/D
Vibration Level
mm
6 1035 0010
Connection
Length
MODEL No.
Square drive
Distance centre/ outer edge
Cutting capacity
Band Saw Blade Size
Blade Speed free at 6 bar
mm
5 6030 0010
MODEL No.
for bolts up to
TECHNICAL SPECIFICATIONS * recommended values dependant on screwing, flow pressure and accessories used.
Cutting capacity ø
Model No: 6 1316 0020 (3/4”) Model No: 6 1316 0010 (1” ) Motor Housing: ZAMAC Hammer Casing: STEEL
Air Consumption
3/4” / 1” IMPACT WRENCH
Model No: 6 1035 0010 (1/2”) Equipped with a multi-step throttle valve. Motor Housing: ZAMAC Hammer Casing: STEEL Tightening torque (hard thread)
1/2” IMPACT WRENCH
Low Weight Free-hand Working Stainless Steel Body Available with Electric, Hydraulic or Explosion-proof Air Motor *Often used for cutting roof bolts in underground mines.
Power
Benefits:
[PNEUMATIC ROTARY HAMMER DRILLS] TECHNICAL SPECIFICATIONS Tool Shank SDS Plus
Performance data at an operating pressure (flow pressure) of 6 bar
Free Speed (rpm)
Motor Power (kW)
Blows Per Minute (bpm)
Drilling Capacity (mm)
Air Consumption 3 (m /min)
Length incl. Drill Chuck (mm)
Weight (kg)
Air Connection
ID of Hose (mm)
420
0.50
3000
25 concrete
0.60
410
9.5
Rd 32x1/8”
10
Underwater model also available.
(MODEL SHOWN ABOVE - Model No: 2 2408 0010 Motor Housing: ZAMAC)
[ASSEMBLY] [ASSEMBLY LINE SOLUTIONS...To improve your bottom line] Increasing productivity and improving product quality with precision pneumatic assembly tools. Precision is an essential feature of every quality production line. Industrial Air Tools carry a range of tools for this environment, especially where torque control is an issue.
IAT
[PRECISION AIR & ELECTRIC SCREWDRIVERS] Range of air and electric screwdrivers with varying torque ratings and speeds. The torque can be adjusted easily and all models shown feature automatic shut-off. MODEL
TYPE
FREE SPEED
TORQUE
WEIGHT
LENGTH
PNEUMATIC
CBP41
PISTOL GRIP
1000rpm
0.5-3.4Nm
0.64kg
178mm
PNEUMATIC
CBP47
PISTOL GRIP
550rpm
1-4.9Nm
0.74kg
178mm
PNEUMATIC
CP45
STRAIGHT
800rpm
0.8-3.9Nm
0.48kg
180mm
ELECTRIC
IAT-945
STRAIGHT
1000rpm
0.08-1.17Nm
0.47kg
230mm
ELECTRIC
IAT-948
STRAIGHT
660rpm
0.08-1.76Nm
0.47kg
230mm
ELECTRIC
IAT-916C
STRAIGHT
1000rpm
0.19-2.45Nm
0.63kg
260mm
ELECTRIC
IAT-926C
STRAIGHT
660rpm
0.19-3.43Nm
0.63kg
260mm
AAT
PEARSON
[NUTRUNNERS]
American Assembly Tools (AAT) are a manufacturer of pneumatic and electric nutrunners for industrial assembly. The large range include straight and angle nutrunners with torque ranging from 5-2000Nm. AAT SPEED-SHIFT™ Nutrunners operate at fast run-down speeds and then the tool downshifts to a slower speed for tightening. This dramatically increases productivity.
TECNA
[TOOL BALANCERS] The use of a Tool Balancer allows the operator to work in safety and without effort, at the same time guaranteeing the maximum care of the tool. Other models come with a built-in air hose connected directly to the main air feed, so the tool is supplied directly.
[BALANCING ARMS]
Balancing Arms are an important means of assistance when using hand-held tools e.g Screwdrivers, Nutrunners, etc. They minimise stress in the operator’s arm, wrist and shoulder from vibration, torque and weight. Many types of Pearson Balancing Arms are available to suit most applications, from 50-450Nm torque and with maximum working ranges from 1.2-3.5m. Made in Sweden.
CODE
CABLE LENGTH (mm)
CAPACITY MIN-MAX
9311
1600mm
0.4-1
9312
1600mm
1-2
9313
1600mm
2-3
9321
2000mm
2-4
9322
2000mm
4-6
9323
2000mm
6-8
9334
2500mm
8-10
9335
2500mm
10-14
9362
2000mm
15-20
9363
2000mm
20-25
9364
2000mm
25-30
9365
2000mm
30-35
AMtAK
[PNEUMATIC TACKER] For name plates and cable ties The Amtak Pneumatic Tacker is designed for permanent fastening of metal name plates and cable tie mounts to metal products without drilling holes. The fastening tacks are placed on the magnetic holding tip of the tool and a press of the trigger delivers a single controlled impact. Amtaks fasten quickly and permanently with no drilling or surface preparation. Permanently embedded fasteners can hold over 100kg. Made in the U.S.A
[MISCELLANEOUS] TOP CAT & FIAM
[AIR MOTORS]
Industrial Air Tools carries a range of Air Motors of varying size and type. Air Motors have distinct advantages over Electric Motors in that they are: ‹‹Compact - smaller and lighter than the equivalent electric motor. ‹‹Not damaged by overloading - cannot burn out. ‹‹Stop and start instantaneously. ‹‹Not affected by dusty or wet environments. ‹‹Does not generate sparks - much safer in hazardous environments. ‹‹Variable control of torque and speed. Air Motors come in reversible and non-reversible models with speeds from 44rpm up to 24000rpm and torque ratings of less than 1Nm to over 90Nm. Power outputs can vary from 90W up to 3000W. There are hundreds of applications for Air Motors, including uses on: mixers, conveyor belts, feed devices and on machines for bottling, buttons, glass, knitting, coating, binding, plastics, packing, spray painting, assembly, drilling, threading, grinding, stud-driving and many more.
IAT
[vacuum systems]
This ‘Xtreme Clean’ vacuum cleaner is extremely efficient and features an automatic filter cleansing system. It is designed for industrial use and has an air inlet and outlet so an air tool can be connected direct to the vacuum cleaner. Other models also available.
IAT
TECHNICAL DATA
560-31XC
AIR FLOW RATE
3600 l/min
VACUUM
230/23 mbar/KPa
POWER (MAX)
1500W
POWER (IEC)
1200W
MAINS CONNECTION
230V / 1PH / 50Hz
WORKING SOUND LEVEL
57 dB(A)
CONTAINER VOLUME
45 l
LxWxH
506 x 476 x 655mm
WEIGHT w/o ACCESSORIES
16kg
MAINS CABLE
7.5m
[MINI GRINDERS]
Range of mini die grinders and pencil grinders with 3mm collets and with free speeds up to 60 000rpm. Made in Japan.
ACCESSORIES
Industrial Air Tools stocks a large range of Air Tool Accessories and associated products. A selection of these products are shown here.
service
INDUSTRIAL AIR TOOLS ADVANTAGES: ‘we service what we sell’ ‹‹Large range of quality products. ‹‹Fast delivery – Australia wide. ‹‹Spares in stock for most models. ‹‹Service workshop for tools sold. ‹‹Pick up and delivery for service work. ‹‹Experienced and knowledgeable staff. ‹‹Family owned and operated. ‹‹Established over 30 years.
At Industrial Air Tools, we support our products with service and spare parts. We offer a pick up and delivery service for all repairs on our tools. ‹‹fast turnaround ‹‹quality workmanship ‹‹spare parts backup
Note: The products in this brochure can be purchased through your regular Industrial Supplier or by contacting Industrial Air Tools on 1800 627 282 for distributor details.
E&OE