1 2
Optional Timer I-36 (When using T36 or dial T37 stats)
6 7 4 5
2
01
01
02
02
Auto Link
Auto Link
03
04
05
05
06
06
2
Basic Dial Thermostat T-37
1
04
Digital Thermostat T-36
1
03
2
Auto Link
UPONOR C-35 CONTROL CENTRE
1 2 11 12
1
Digital Thermostat with Timer Functions T-38
07
Fig.1
Time zone 1 Time zone 2 No time control
One of these three terminals must be connected from the Controller C-35 to a thermostat if a thermostat is used for this channel
This terminal must be connected from the controller to a thermostat if a thermostat is used for this channel
POWER
Connect to Switch Live (A)
Switched Fuse Spur 3 Amp Fuse
Controller (C-35) notes, The diagram below shows the Controller (C-35) linked to an optional Timer (I-36), five thermostats and ten 24V actuator heads. Only 6 of the 12 channels are shown for clarity. Each thermostat requires two cables to be wired to two of the four thermostat connections. The bottom connection must be made. The second wire should be connected to one of the three remaining terminals depending on whether the Timer (I-35) is being used and if so, which of the two time channels is being used. See Fig 1.
E
L
N