Š
Copyright Uponor Limited
Multiple manifold arrangement
Copyright in this drawing belongs to Uponor Limited. This drawing may not be used, sold, licensed, transferred, copied or reproduced in whole or in part or in any manner or form other than with the prior written consent of Uponor Limited.
Zone Valve
Mixing Valve
Pump
Mechanical Schematic Manifold
Manifold
Connect to Smatrix Move controller*
PPG Pump Set Ref: PPG-1.0A
* Refer to Smatrix Move electrical schematic for connections.
Connect to boiler demand. (refer to boiler manufacturer for details).
Top Meters NL
Boiler Flow
A
Supply sensor
Open
Isolation Valve
Close Common
NL
Fill/Drain Point
B
2 Port Motorised Zone Valve (by others)
Actuator
Pump
Length
2 Port
147mm
3 Port
197mm
4 Port
247mm
5 Port
297mm
6 Port
347mm
7 Port
397mm
8 Port
447mm
9 Port
497mm
10 Port
547mm
11 Port
597mm
12 Port
647mm
The height of the manifold is 340mm and needs to be mounted at least 300mm from the floor.
24V Uponor Actuators
Fill/Drain Point
Boiler Return
Manifold
Notes, 1) A bypass is recommended on the primary circuit. 2) The drawing excludes isolating & regulating valves for clarity. 3) All items to be installed in accordance with manufacturer's instructions and current best practices. 4) If limited space is available the manifold and pump set may be split and installed in different locations to save space. Uponor reserve the right to alter specifications and operating parameters for all their systems at any time as part of their policy of continuous product development.
PPG-20 Pump Group length - 480mm
Valve - 85mm
Manifold length - see table