The Advantages:
Contact Details
• Easy to handle:
General Enquiries For sales and literature, or for an initial discussion about your project, please call, fax or email:Tel: 01455 550355 Fax: 01455 550366 Email: enquiries.uk@uponor.com
Low-weight and highly flexible, the pipe can be installed around almost any obstacle.
• Easy to assemble: No special tools required - just two spanners.
Pre-Insulated Pipe Systems F R O M A TO B W I T H O U T LO S I N G O C
• Rapid work progress: Up to 200m joint-free installation. Up to
• Cut to length service:
12 %
Tailor-made lengths to your requirements, delivered directly to site.
better insulation
• Full design service: Pipe sizing and material take-offs.
m
lation foa New insu Independent inspection organisations certify that our products meet the strictest standards.
Pre-Insulated Pipe Composition Excellent low weight PE-X foam heat insulation
Ribbed jacket pipe made of impact proof polyethylene. Very flexible with high load bearing capacity
The two coloured ‘dog bone’ prevents mix ups in flow and return connections
Uponor Limited Head Office, Gilmorton Road, Lutterworth, Leicestershire, LE17 4DU
T 01455 550355 E enquiries.uk@uponor.com W www.uponor.co.uk
UPIP-DL-07-2012
Corrosion proof, oxygen impermeable carrier pipe made of PE-X material
Uponor Pre-Insulated Pipe
Pipe Product Range
Uponor Pre-Insulated Pipes the only choice for economical transport of hot and cold fluids for both domestic and commercial applications.
Tailor-made lengths No need to order full coils. Our cut-to-length service will meet your exact specifications, saving you time on site.
The Uponor Pre-Insulated Pipe product range is summarised below. Supported by a range of accessories including couplings, wall sleeves and insulation kits, we have everything you need for a complete system.
Besides excellent insulating efficiency, our light-weight Pre-Insulated pipes offer flexibility, ease of installation and a service life in excess of 25 years.
No on-site cutting. No wastage. No disposal costs.
Suitable for the following: • Heating water • Hot tap water • Cooling water • Industrial fluids Applications: • District heating • Remote boilers • Biomass • CHP • District cooling
Full details from your merchant or contact Uponor directly.
Aqua Single
What you order will be delivered as quickly as possible to where you need it.
Aqua Twin
Quattro
• PEX pipe for potable water, hot water Max. 95 oC/10 bar. • Carrier Pipe 25, 32, 40, 50, 63 ø mm. • Trace heating cable available on request.
• PEX pipe for potable water, hot water Max. 95oC/10 bar. • Hot water and circulation pipe in one jacket. • Carrier pipe 25/25, 32/25, 40/25 and 50/25 ø mm.
• For heating water and potable water (warm), Max. 95oC/10 bar 4 line pipe, combination of Thermo Twin and Aqua Twin. • Suitable for building connection from mains via chamber.
Supra
Thermo Single
Thermo Twin • Twin PEX pipe with EVOH for flow and return lines for heating water. • Max. 95oC/6 bar. • 25/25, 32/32, 40/40, 50/50, 63/63 ø mm.
Thermo Mini • Single PE-100, Max 20oC/16 bar for potable water, cold water, waste water transport, cooling water. • 25-110 ø mm frost protection cable on request.
• Single PEX pipe with EVOH for heating water. Max. 95oC/6 bar. • Carrier pipe 25-110 ø mm • Trace heating cable available on request.
• Single PEX pipe with EVOH for heating water. Max. 95oC/6 bar, with small jacket pipe. • Carrier pipe 25 and 32 ø mm. • Trace heating cable available on request.