Š
Copyright Uponor Limited
Copyright in this drawing belongs to Uponor Limited. This drawing may not be used, sold, licensed, transferred, copied or reproduced in whole or in part or in any manner or form other than with the prior written consent of Uponor Limited.
Thermostat wiring options Individually connected
Daisy chain connected. T145
T146 / T148
DRAIN
A B
optional controller link for more than one controller
Electrical Schematic
T143 A B-
+ -
Smatrix Pulse Base with FLUVIA 15 (Wired) Ref: SPB-1.0A
OR A B+ -
A B+ -
Uponor reserve the right to alter specifications and operating parameters for all their systems at any time as part of their policy of continuous product development.
A B+ -
connection to controller (indiviual)
Connections to the controller can be made in any combination of daisy chain or individually. But you must connect:-
to to to to
A B+ -
A B + -
N
A B + -
connection to controller (Daisy Chain)
The bare drain wire must be earthed at one end only. N
L N E 230V Supply From 3 Amp Fused Spur
Connect to boiler demand. (refer to boiler manufacturer for details). OR OPTION: If using multiple boxes use boiler relay on master controller.
RJ-45 supplied cable
A B+ -
A B-
A B + - Upto 6 additional
zones
RELAY 1 (PUMP)
RELAY 2 (Boiler)
OK
a 1 b
Transformer
a 2 b
3
4
5
7
6
Base Controller (X-245) Upto 8 x 24V Uponor actuators (only one actuator per terminal).
Slave Module Unit (M-242) Plugs into the end of the base module .
8
9
10
11 12
Upto 6 additional 24V Uponor actuators (only one actuator per terminal).