Quick Guide to Smatrix Wave PLUS Touch Screen Interface Registration 1. Remove the grey cover from the controller and ensure there is power to the controller and the power light is illuminated. Please note at least one thermostat must be registered before an Interface can be registered.
2. Press and hold the OK button on the controller until the LED for the first unregistered channel begins to flash.
3. Move the red flashing LED to the power LED using the < or > right buttons. The power LED will start to flash. 4. Press the OK button on the controller to select device registration. Channel 1 starts flashing red. Press the OK button on the controller again to select system device channel 1. Channel 1 LED starts flashing green. 5. Press Link Touch Screen to controller in the RF Link menu (Main menu > Preferences) on the Touch Screen interface.
6. The channel 1 LED on the controller will now be fixed green which shows the registration of the timer (system device) was successful. 7. Press and hold the OK button on the controller until the green LED turn off and it is just the power LED illuminated red. Uponor Limited Gilmorton Road Lutterworth Leicestershire LE17 4DU
www.uponor.co.uk/support support.uk@uponor.com
07 | 2016