Accessoire Harley-Davidson Piece Moto Custom Pot US Import by Pieces Chrome et Accessoires Custom des USA

Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr

EXHAUST

IMPORTANT INFORMATION RELATING TO EXHAUST PRODUCTS: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing. See the HARDWARE, CHEMICALS & TOOLS section for products that will help prevent or remove blueing. DISCLAIMER: Exhaust systems for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not inhibit the proper function of emission control systems are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. More California exhaust information is available at www.arb.ca.gov/. DISCLAIMER: Products shown may be designed, manufactured, intended and sold for use on competition vehicles that are operated only on closed course racing circuits unless otherwise noted and use of the same on public roads or lands may be a violation of local, state and/or federal laws. DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.

335

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1410

SEATS & SISSY BARS EXHAUST

1800-1422

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1411

GASKETS & SEALS

1800-1412

ELECTRICAL

V21869

LIGHTING 1800-1413

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1861-0477

BIG SHOTS STAGGERED AND LONG •Feature the revolutionary Power Chamber™ design; a unique crossover system that increases horsepower and torque •Armed with full-coverage 21/2” heat shields that are essentially blueproof for long-lasting style •Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality black ceramic coat •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Meticulously finished billet end caps •Removable baffles and all mounting hardware included •Made in the U.S.A.

V16917

NOTE: Will not fit models with kickstarts.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

336

CHROME PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST MODELS 1800-1410 Staggered w/ slash-cut end caps 1800-1422 Long w/ straight-cut end caps FOR 86-11 FXS/FXST/FLST MODELS (EXCEPT 09 FXSTSSE) 1 1800-0447 Staggered 1800-04481 Long FOR 12-13 DYNA MODELS (EXCEPT 12 FLD) 1800-1411 Staggered w/ slash-cut end caps 1

SUG. RETAIL

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

$629.95 703.95 624.95 699.95 629.95

Power Chamber

BLACK PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST 1800-1412 Staggered w/ straight-cut end caps FOR 86-11 FXS/FXST/FLST MODELS (EXCEPT 09 FXSTSSE) 1800-10701 Staggered FOR 12-13 DYNA MODELS (EXCEPT 12 FLD) 1800-1413 Staggered w/ straight-cut end caps FOR 06-11 DYNA MODELS 1800-1071 Staggered 1

SUG. RETAIL $685.95 680.95 685.95 680.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

PART # DESCRIPTION REPLACEMENT/OPTIONAL END CAPS/BAFFLES FOR BIG SHOTS STAGGERED AND LONGS V16917 Slash billet end caps (pr.) V16919 Straight billet end caps (pr.) V21869 Quiet Baffle, 2-3 dB quieter (ea.) 1861-0477 Repl. standard baffle (ea.)

SUG. RETAIL $89.95 59.95 29.95 28.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1006

1800-1482

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1017

HANDLEBARS, CONTROLS & MIRRORS

1800-1484

CABLES

BRAKES

BIG RADIUS 2-INTO-1 •Traditionally viewed as the kind of pipe merely designed for performance, Big Radius 2-into-1 breaks the mold, delivering white-knuckle performance with the style that has won over the motorcycle public •Incorporating blue-proof technology across the entire length of the pipe, Big Radius 2-into-1 will keep its showroom finish whether at the dragstrip or on the boulevard •Includes mounts for factory O2 sensors as required •Optional left passenger peg relocation kit for 86-13 Softail models matches left peg to right peg’s position after installation of Big Radius •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES 1800-1485

FRAMES, SUSPENSION & FENDERS

NOTE: Not for Softail models with Heritage-style saddlebags. PART # CHROME 1800-1006 1800-1482 1800-04411 1800-14842 1800-04422 1620-0509 1 2

DESCRIPTION

SUG. RETAIL

PART # BLACK 1800-1483 1800-10171 1800-14852 1800-10222 1620-0509

For 08-11 FXCW/C, 09 FXSTSSE models $719.95 For 12-13 FXS/FLS/FLST models 724.95 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 719.95 For 12-13 FXDB/FXDF models 724.95 For 06-11 FXDB/FXDF models 719.95 Optional left passenger peg relocation kit for 86-11 Softail models 21.95 Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately). Will also fit FXD/FXDC/FXDL/FXDWG if passenger pegs are removed.

DESCRIPTION For 12-13 FXS/FLS/FLST models For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 FXDB/FXDF models For 06-11 FXDB/FXDF models Optional left passenger peg relocation kit for 86-13 Softail models

SUG. RETAIL $824.95 819.95 824.95 819.95

WHEELS & AXLES

21.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

337

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1408

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1067

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1421

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

338

BIG RADIUS

1800-0746

•Big 21/2” full header and muffler heat shield system is virtually blue-proof •Chrome pipes feature scalloped tips for a unique look (except XL which are slash-cut) •Black pipes are all slash-cut and feature heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and tips (except XL) •Removable baffles and mounting hardware included •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Optional left passenger peg relocation kit for 99-09 FL models (PART #1620-0510) matches left peg to right peg’s position after installation of Big Radius •Made in the U.S.A. PART # DESCRIPTION FOR HARLEY-DAVIDSON MODELS, CHROME 1800-0994 For 08-11 FXCW/C, 09 FXSTSSE 1800-1408 For 12-13 FXS/FLST 1800-04461 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 1800-1409 For 12-13 Dyna (except 12-13 FLD) 1800-0239 For 06-11 Dyna 1800-0083 For 91-05 Dyna 1800-1215 For 10-13 FLHT, FLTR, FLHX, FLHR 1800-1067 For 09 FLHT, FLTR, FLHX, FLHR

SUG. RETAIL $699.95 704.95 699.95 704.95 699.95 679.95 699.95 699.95

PART # DESCRIPTION SUG. RETAIL FOR HARLEY-DAVIDSON MODELS, CHROME (CONT) 1800-0748 For 07-08 FLHT, FLTR, FLHX, FLHR $699.95 1800-0955 For 99-06 FLHT, FLHR, FLHX, FLTR 679.95 1800-12171 For 04-13 XL 599.95 1620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95 FOR HARLEY-DAVIDSON MODELS, BLACK 1800-0995 For 08-11 FXCW/C, 09 FXSTSSE 799.95 1800-1421 For 12-13 FXS/FLST 804.95 1 1800-0746 For 86-11 FXS/FLS/FXST/FLST (except 09 FXSTSSE) 799.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

BIG RADIUS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0956

FUEL/AIR SYSTEMS 1800-1068

ENGINE TRANSMISSION & DRIVELINE

PART # DESCRIPTION SUG. RETAIL FOR HARLEY-DAVIDSON MODELS, BLACK (CONT) 1800-1420 For 12-13 Dyna (except 12-13 FLD) $804.95 1800-0956 For 06-11 Dyna 799.95 1800-1068 For 09 FLHT, FLTR, FLHX, FLHR 799.95 1800-0957 For 07-08 FLHT, FLTR, FLHX, FLHR 799.95 1800-12181 For 04-13 XL 679.95 1620-0510 Optional left passenger peg relocation kit for 99-09 FL 21.95 FOR BIG DOG MOTORCYCLES™ RIGHT SIDE DRIVE MODELS, CHROME 1800-0592 For 06-10 K9, Mastiff (carb models only) 679.95 1

GASKETS & SEALS 1800-1218

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-0584

FRAMES, SUSPENSION & FENDERS

Q-SERIES DOUBLE BARREL •A quieter standard, that’s what the Q series is all about, plus they’re loaded with other features •100% blue-proof technology with 220° head pipe and muffler heat shields •Proprietary Power Chamber technology for the right horsepower and torque gains all the way through the power band •Slash-cut ends to finish off the look •Made in the U.S.A. PART # 1800-05841 1

FOOTRESTS & LICENSE PLATE FRAMES 1800-0586

DESCRIPTION SUG. RETAIL For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $554.95

PART # 1800-05861

DESCRIPTION For all 04-13 XL

WHEELS & AXLES SUG. RETAIL $554.95

Pre 07 models will require O2 sensor port plug kit PART # 1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

339

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0264

ENGINE 1800-0744

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-0753

CABLES

BRAKES TANKS & OIL FILTERS 1800-0751

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

340

SIDESHOTS •Feature Vance & Hines’ Power Chamber technology •Massive 220° full-length 21/2” header pipe and muffler heat shield •Twin slash-cut end caps finish off the look •Removable baffles and mounting hardware included •Black systems feature full coverage heat shields coated with a race-quality black ceramic, contrasted with a signature chrome badge and tips •Made in the U.S.A. PART # CHROME 1800-0264 1800-07501 1861-0072 1

DESCRIPTION For 06-11 Dyna models For 04-13 XL models Quiet baffle (ea.)

SUG. RETAIL $648.95 599.95 36.95

PART # BLACK 1800-07441 1800-0753 1800-07511 1861-0072

1861-0072

Power chamber DESCRIPTION For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 06-11 Dyna models For 04-13 XL models Quiet baffle (ea.)

SUG. RETAIL $719.95 719.95 688.95 36.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1414

SEATS & SISSY BARS

1800-0467

EXHAUST FUEL/AIR SYSTEMS

1800-0154

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-0745

1800-1367

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-0793 1800-1417

1861-0072

SHORTSHOTS STAGGERED •A revolution in blue-proof exhaust technology, Vance & Hines delivers the short, fat, straight-pipe look with twin slash-cut ends •High style and performance combined with unbeatable value •13/4” headpipes with 220° coverage heat shields •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Includes removable baffles, mounting hardware and instructions •Black pipes feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips •Made in the U.S.A. PART # CHROME 1800-1414 1800-1209 1800-04521 1800-1416 1800-0263 1800-0154 1800-04671 1800-1367 1861-0072

DESCRIPTION

SUG. RETAIL

For 12-13 FXS/FLS/FLST For 08-11 FXCW/C models, 09 FXSTSSE For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models For 91-05 Dyna Glide models For 04-13 XL models For 99-03 XL models Quiet Baffle (ea.)

$384.95 379.95 379.95 384.95 379.95 359.95 379.95 379.95 36.95

PART # BLACK 1800-1415 1800-07451 1800-1417 1800-0793 1800-07521 1861-0072 1

DESCRIPTION

SUG. RETAIL

For 12-13 FXS/FLS/FLST For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models For 04-13 XL models Quiet Baffle (ea.)

$464.95 459.95 464.95 459.95 459.95 36.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

341

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST V17209

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS V17205

CABLES

BRAKES TANKS & OIL FILTERS V21867

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

342

SHORTSHOTS ORIGINAL •Share many of the famed Straightshots features, except in a shorty version for a short-piped, hot-rod-bike look •The 13/4” pipes exit at the end of the frame just in front of the rear wheel •Full coverage shields; 220° plasma-cut heat shields run all the way back to the meticulously finished end caps •Include removable baffles and mounting hardware •Made in the U.S.A.

V17207

NOTE: Will not fit models with kickstarts. PART # V17209 V17205

DESCRIPTION For 86-06 Softail models For 91-05 Dyna Glide models (except 03-05 FXDWG)

SUG. RETAIL $328.95 329.95

PART # V17207 V21867

DESCRIPTION For 87-99 FXR models Repl. baffle w/ end cap (ea.)

SUG. RETAIL $328.95 32.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 1800-1208

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1222

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1861-0477

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES V21869

1800-1216

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

STRAIGHTSHOTS •21/4” mufflers are welded to 13/4” head pipes; all are covered by one-piece, large 21/2” full-coverage, full-length chrome header/muffler heat shields that are virtually blue-proof •Feature the traditional Vance & Hines hot-rod sound •Removable baffles and mounting hardware included •Made in the U.S.A.

PART # 1800-12081 1800-1222 1800-12161 1861-0477 V21869

NOTE: Will not accept Hot Tips.

DESCRIPTION For 86-11 FXS/FXST/FLST, 10-11 FLSTSE models (except 09 FXSTSSE) For 06-11 Dyna models For 04-13 XL models Repl. baffle for PART #s 1800-1216, 1800-1222 (ea.) Opt. quiet baffle (ea.)

SUG. RETAIL $424.95 424.95 424.95 28.95 29.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

343

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0258

EXHAUST FUEL/AIR SYSTEMS 1801-0259

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1801-0260

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0111

CABLES

BRAKES TANKS & OIL FILTERS

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

344

V21869

1801-0088

DASHES & GAUGES STRAIGHTSHOTS SLIP-ONS

•Superior performance and style without breaking the bank •Straightshots HS Slip-ons offer the same great look and sound riders have grown to love from Vance & Hines at an unbelievable value •Drenched in Vance & Hines show-quality chrome, massive 21/2” diameter plasma arc-cut, 220° full-coverage muffler heat shields house the Straightshots HS Slip-ons and make them blue-proof for long-lasting style •Race-inspired performance and traditional hot rod sound set this system apart •Mount to the stock-header pipes with no modifications •Includes removable baffles and all the mounting hardware for a hassle-free, perfect fit every time •Made in the U.S.A. PART # 1801-0258 1801-0110 1801-0259 1801-0260

DESCRIPTION For 07-13 FXST/C, FLST/C, 08-11 FXCW/C For 00-06 FXST/C, FLST/C For 07-13 FLSTF, FXSTD For 05-13 FLSTN, 08-11 FLSTSB, 12-13 FLS

SUG. RETAIL $299.95 289.95 299.95 299.95

PART # 1801-0111 1801-0088 V21869

DESCRIPTION For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models Opt. quiet baffle (ea.)

SUG. RETAIL $289.95 279.95 29.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS V16805

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS V16809

ELECTRICAL

STRAIGHTSHOTS ORIGINAL •All Straightshots feature full-length, chrome 220° coverage heat shields that are each plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing, fat pipe look •Feature 13/4” headpipes with 21/4” bodies •Customize Straightshots with one of the unique, optional, plasma-arc cut Hot Tips that can be mounted and rotated in two different angles for different looks; or run Straightshots straight •Hot Tips are available separately and sold in pairs •Removable baffles provide powerful sound but tone down the bark of normal straight pipes •Systems include all necessary mounting hardware and instructions for a hassle-free, perfect fit every time •Made in the U.S.A. PART # V16805 V16809

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES V16811X

DESCRIPTION For 91-05 Dyna Glide models (except FXDX/FXDXT) For 86-03 XL models (except 883C and 1200C)

SUG. RETAIL $445.95 445.95

PART # V16811X V21269

DESCRIPTION For 99-03 XL 883C and 1200C models Repl. baffle (ea.)

SUG. RETAIL $749.95 24.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

16901

16903

16905

V16913

HOT TIPS FOR STRAIGHTSHOTS ORIGINAL SYSTEMS •Interchangeable Hot Tips let you change the look of the bike several different ways in minutes •Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others •Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs •Beautiful chrome finish tops off each Hot Tip •Sold in pairs •Made in the U.S.A. PART # 16901 16903

DESCRIPTION Velocity long-style Hot Tips Vortex-style Hot Tips

SUG. RETAIL $49.95 49.95

PART # 16905 V16913

DESCRIPTION Viper-style Hot Tips Billet-style Hot Tips

SUG. RETAIL $49.95 112.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

345

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION V21869

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

LONGSHOTS HS •Large 21/2” full-coverage header and muffler heat shields are virtually blue-proof •Feature the traditional Vance & Hines hot-rod sound •Scalloped slash-cut ends •Removable baffles and mounting hardware included •Made in the U.S.A.

1800-0017

NOTE: Will not accept Hot Tips. PART # 1800-0017

DESCRIPTION For 86-06 Softail models

SUG. RETAIL $579.95

PART # V21869

DESCRIPTION Optional quiet baffle (ea.)

SUG. RETAIL $29.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

346

V17811

LONGSHOTS ORIGINAL •Feature 13/4” headpipes with 21/4” bodies •Include full-length, 220° coverage heat shields that are plasma-arc cut from a full piece of tubing that matches the bodies exactly for a perfect, non-blueing fat pipe look •Removable baffles provide powerful sound but tone down the bark of normal straight pipes •Customize your Longshots with optional plasma-cut Hot Tips that can be mounted and rotated to two different angles •Hot Tips are available in several styles and are sold separately in pairs •Systems include all necessary mounting hardware and instructions PART # V17811 V17805

DESCRIPTION For 86-06 Softail models For 91-05 Dyna Glide models

SUG. RETAIL $474.95 474.95

V17805

PART # V21269

DESCRIPTION Repl. baffle (ea.)

SUG. RETAIL $24.95

HOT TIPS FOR LONGSHOTS ORIGINAL SYSTEMS •Interchangeable Hot Tips let you change the look of the bike several different ways in minutes •Each Hot Tip is either custom plasma-arc cut from tubing or machined from billet aluminum for a look that can’t be matched by others •Hot Tips can be mounted and rotated to two different angles to highlight their one-of-a-kind designs •Beautiful chrome finish tops off each Hot Tip •Sold in pairs •Made in the U.S.A. PART # 16901 16903

DESCRIPTION Velocity long-style Hot Tips Vortex-style Hot Tips

SUG. RETAIL $49.95 49.95

16901

16905 PART # 16905 V16913

DESCRIPTION Viper-style Hot Tips Billet-style Hot Tips

16903

V16913 SUG. RETAIL $49.95 112.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1517

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1473

1861-0709

BRAKES PRO PIPE •Includes tuned length stepped headers with a highly efficient merge collector that feeds into the stepped 41/2” megaphone design •Complete with header and collector heat shields, as well as a shield over the first step of the megaphone; also features a CNC-machined chrome plated billet end cap •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Made in the U.S.A.

TANKS & OIL FILTERS 1861-0793

NOTE: Not for Softail models with Heritage-style saddlebags. PART # CHROME 1800-1470 1800-12061 1800-1207 1800-1493 1800-1517 1800-1221 1800-1210 1800-1211 1800-12121

DESCRIPTION For For For For For For For For For

SUG. RETAIL

12-13 FXS/FLS/FLST 86-11 FXS/FXST/FLST models (except 09 FXSTSSE)1 08-11 FXCW/C, 09 FXSTSSE models 12-13 Dyna models (except 12-13 FLD) 12-13 FLD 06-11 Dyna models 10-13 FLHT, FLHR, FLHX, FLTR models 09 FLHT, FLHR, FLHX, FLTR models 99-08 FLHT, FLHR, FLHX, FLTR models

$604.95 599.95 599.95 604.95 604.95 599.95 599.95 599.95 599.95

PART # DESCRIPTION SUG. RETAIL BLACK 1800-1473 For 12-13 FXS/FLS/FLST $749.95 1800-14761 For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) 749.95 1800-1474 For 12-13 Dyna models (except 12-13 FLD) 749.95 1800-1477 For 06-11 Dyna models 749.95 1800-1475 For 10-13 FLHT, FLHR, FLHX, FLTR models 749.95 1 1800-1478 For 99-08 FLHT, FLHR, FLHX, FLTR models 749.95 OPTIONAL COMPONENTS 1861-0709 Opt. competition baffle (ea.) 94.95 1861-0793 Opt. quiet baffle (ea.) 95.95 1

Non-sensor applications will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

347

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1554

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1555

STAINLESS HI-OUTPUT 2-INTO-1 •Engineered for high output engine modifications •Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications •13/4” to 2” tapered headpipes with 21/2” inlet to megaphone and 4” to 41/2” stepped muffler body •3” to 31/4” baffle with anti-reversion cone •All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish •Contoured laser-cut heat shields •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Made in the U.S.A. PART # 1800-1554 1800-1555

DESCRIPTION For 86-13 FXS/FLS/FXST/FLST models For 06-13 Dyna models (except FLD)

1800-1491

SUG. RETAIL $999.95 999.95

PART # 1800-1491

DESCRIPTION For 09-13 FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL $999.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

348

Backview of collector

V21299 V23075

PRO-PIPE HS

•2-into-1 Pro-Pipe is the system Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors •Meticulous engineering; a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gases, then a special baffle system provides just the right sound •Collector design is blue-proof •Superior fit and chrome finish when compared to other 2-into-1 systems •True full-length 220° wrap heat shields •Removable baffle and all mounting hardware included •Made in the U.S.A.

V17523

NOTE: For 03-05 Dyna applications you must use exhaust flanges OEM #65328-83. PART # DESCRIPTION V17523 For 91-05 Dyna models BAFFLES AND END CAPS V21299 Repl. standard baffle (ea.)

SUG. RETAIL $529.95 29.95

PART # DESCRIPTION BAFFLES AND END CAPS (CONT) V21389 Repl. competition baffle (ea.) V23075 Repl. end cap (ea.)

SUG. RETAIL $40.95 57.95

BLACKOUT 2-INTO-1 •Two of the baddest looking models in the Harley Dark Custom line-up are the Sportster Iron and Nightster •Here is the baddest looking exhaust system to do these Dark Custom darlings justice •Also compatible with all other Sportster models; system makes the already quick and nimble Sportster a menace to be reckoned with •Features a durable high temperature matte black ceramic coating with a matching matte black end cap and riveted-on Vance & Hines badge PART # 1800-12201 1861-0593 1

DESCRIPTION For 04-13 XL models Opt. quiet insert (requires baffle mods) (ea.)

1861-0593

SUG. RETAIL $474.95 21.95

Pre 07 models will require O2 sensor plug port kit PART #1861-0464 (sold separately).

1800-1220

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1487 1800-1488

ENGINE TRANSMISSION & DRIVELINE

SWITCHBACK DUALS WITH SLIP-ON MUFFLERS •Designed exclusively for the new Dyna Switchback, Vance & Hines introduces complete exhaust systems that bring the classic look of true duals to the Switchback, paired with either Twin Slash Round or Monster Round slip-on mufflers 1800-1487 •Feature beautifully crafted chrome plated mounting brackets for the mufflers Rear mount system that look great on the Switchback even when riding without the saddlebags •All Switchback Duals feature full-coverage heat shields over the head pipes •4” Round Twin Slash slip on mufflers are marked by the signature V&H twin slash end treatment and put out a nice aggressive rumble that can be toned down with optional sound inserts PART #1861-0593 (sold separately) •4” Monster Round slip-on mufflers with CNC-machined billet end caps pulse with the same deep rich tone as Monster Rounds on Touring models •Includes flat plane mounting panel for the 12mm oxygen sensors utilized on the Dyna Switchback, which positions the sensor deeper into the exhaust stream, providing enhanced data feedback to the ECM PART # FOR 12-13 FLD MODELS 1800-1487 1800-1488

DESCRIPTION Swtichback Duals with Twin Slash Slip-On Mufflers Swtichback Duals with Monster Round Slip-On Mufflers

SUG. RETAIL $999.95 1,299.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

POWER SHOTS

FOOTRESTS & LICENSE PLATE FRAMES

•Unique dual-staggered, twin-layered slash-cut end tips •Two 21/2” muffler bodies, complete with removable baffles and featuring Vance & Hines signature hot-rod sound; include a single chrome 360° heat shield •Feature the Power Chamber™ crossover system for increased horsepower and torque •Require the use of the OEM header pipes and their heat shields •Made in the U.S.A. PART # V17913

DESCRIPTION For 02-07 VRSCA/AW/B/SE/X V-Rod models (w/ 180mm rear tire)

WHEELS & AXLES SUG. RETAIL $624.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

349

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

V21869

SOFTAIL DUALS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

•Give your Softail the nostalgic look of true duals •21/8” 220° full-coverage headpipe heat shields and 21/2” slip-on heat shields make the system virtually blue-proof •The Slip-ons give the performance and sound you would expect with standard louver core baffles •Enhance the nostalgic look of a Springer Softail or any other Softail model •Feature matched straight-cut billet tips •New flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-13 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Made in the U.S.A.

1802-0011

1802-0012

NOTE: Pre-07 applications will require O2 sensor port plug kit PART #1861-0464.

ELECTRICAL

PART # 1800-1486 1800-1304

DESCRIPTION For 12-13 FXS/FLS/FLST models For 97-11 FXS/FXST/FLST models (except FXCW/FXCWC/FXSTSSE)

SUG. RETAIL $704.95 699.95

PART # V21869 1802-0012 1802-0011

DESCRIPTION Quiet baffle (ea.) Opt. Fishtail II end caps (pr.) Opt. slash billet end caps (pr.)

SUG. RETAIL $29.95 169.95 89.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-1129

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

350

1800-1219

WIDOW XR 2-1-2 SYSTEM •There’s no better way to squeeze out the full potential of the XR’s high-output motor than with the Vance & Hines Widow XR •Employs performance tuned headers with a Power Chamber crossover and twin 31/2” high-flow mufflers •Yields solid power gains and adds a menacing growl that’ll make riders feel like they’re at PART # DESCRIPTION the grand nationals FOR 09-12 XR1200 MODELS •Race-quality black ceramic coat or Limited 1800-1129 Black Edition Stainless Steel version 1800-1219 Limited Edition Stainless Steel •Optional quiet baffle lowers sound 2-4 db 1861-0620 Opt. quiet bafffle (ea,) •Made in the U.S.A.

1861-0620

SUG. RETAIL $649.95 1,029.95 32.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1131

GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1132

HANDLEBARS, CONTROLS & MIRRORS 1802-0011

CABLES

1861-0573 V21869

BRAKES

1802-0012

BIG SHOT DUALS •The ultimate complete system for late-model touring machines •Armed with full-coverage, 220°-wrap, 21/2” heat shields that are essentially blue-proof for long-lasting style •Heat shields surround 13/4” headpipes that flow into 21/8” muffler bodies •True 2-into-2 system eliminates factory crossover and provides a clean, classic dresser look down both sides of the bike •Specially tuned baffles produce the deep Vance & Hines exhaust note with optional quiet baffles also available •Superior fit and an unrivaled finish when compared to other systems •Meticulously finished with straight-cut billet end caps •Optional billet slash-cut end caps or the most unique Fishtail II end caps also available •Removable baffles and all mounting hardware included •Black systems feature full coverage heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and end tips •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals •Made in the U.S.A. PART # CHROME 1800-12141 1800-1131 1800-0466 1800-0155 BLACK 1800-1132 1800-0747

DESCRIPTION For For For For

10-13 FLHT, FLHR, FLHX, FLTR 09 FLHT, FLTR, FLHX, FLHR 07-08 FLHT, FLTR, FLHX, FLHR 95-06 FLT, FLHT, FLHX, FLTR, FLHR

For 09 FLHT, FLTR, FLHX, FLHR For 07-08 FLHT, FLTR, FLHX, FLHR

SUG. RETAIL $709.95 709.95 709.95 689.95 847.95 814.95

PART # DESCRIPTION SUG. RETAIL CONVERSION MOUNT KIT 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust $19.95 REPLACEMENT/OPTIONAL END CAPS/BAFFLE 1802-0011 Slash billet end caps (pr.) 89.95 1802-0012 Fishtail II end caps (pr.) 169.95 V21869 Optional quiet baffle (ea.) 29.95 1

10 FLTRX/FLHX require conversion mount kit PART #1861-0573.

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

351

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

352

STAINLESS HI-OUTPUT DUALS •Engineered for high output engine modifications •Dyno developed and tested to increase volumetric efficiency critical to extracting maximum horsepower from high output engine modifications •Matches tapered headpipes with larger inlet mufflers •13/4” to 2” tapered headpipes with 2” inlet on mufflers and 4” to 41/2” stepped muffler body •3” to 31/4” baffle with anti-reversion cone •All stainless steel construction with TIG welding and race-inspired brushed stainless “Works” finish •Contoured laser-cut heat shields •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Made in the U.S.A. PART # 1800-1492

DESCRIPTION For 09-13 FLT, FLHT, FLHR, FLHX, FLTR models

SUG. RETAIL $1,749.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1802-0260 w/ 1801-0606 mufflers

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1802-0261 w/ 1801-0393 mufflers

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1802-0260

POWER DUALS •Power Duals is the ticket to style, quality and performance •More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber hidden behind a contoured heat shield that generates more horsepower and torque than stock •Systems include 220° full-coverage header pipe heat shields •This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage •Allows the use of any 09-13 OEM style mufflers •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to Big Shot Duals, Dresser Duals or Power Duals •Adapter kit extends Power Duals head pipes to allow installation on H-D FL Trike models •Made in the U.S.A. PART # CHROME 1802-0260 1802-0085 BLACK 1802-0261

DESCRIPTION

SUG. RETAIL

For 10-13 FLHT, FLHX, FLHR, FLTR models For 09 FLHT, FLHX, FLHR, FLTR models

$519.95 519.95

For 10-13 FLHT, FLHX, FLHR, FLTR models

599.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1802-0129

FOOTRESTS & LICENSE PLATE FRAMES

1861-0573

PART # DESCRIPTION CONVERSION MOUNT KITS 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust 1802-0129 For 09-13 H-D FL Trike models

SUG. RETAIL

$19.95 79.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

353

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1802-0086 Left side

LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0204 w/1801-0391 mufflers

1802-0086 w/1801-0311 mufflers

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1802-0259 Left side

GASKETS & SEALS ELECTRICAL

1802-0259 w/1801-0312 mufflers

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1802-0205 w/1801-0312 mufflers

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

354

1802-0087 w/1801-0312 mufflers

DRESSER DUALS •Independent 13/4” header pipe system for maximum performance •Include 220° full-length 21/8” heat shields •Allow the use of any 95-13 OEM-style mufflers •Perfect complemeant to the Vance & Hines Slip-on mufflers (sold separately) •Available in chrome or black ceramic finish •Conversion kit includes grommet and mounting rail required to convert 10 FLTRX/FLHX models with factory 2-into-1 exhaust to dual systems •Adapter kit extends Dresser Dual head pipes to allow installation on H-D FL Trike models •Made in the U.S.A. PART # CHROME 1802-0258 1802-0086 1802-02041 BLACK 1802-0259 1802-0087 1802-02051

DESCRIPTION

SUG. RETAIL

For 10-13 FLTR, FLHR, FLHT, FLHX models For 09 FLTR, FLHR, FLHT, FLHX models For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models

$439.95 439.95 439.95

For 10-13 FLTR, FLHR, FLHT, FLHX models For 09 FLTR, FLHR, FLHT, FLHX models For 95-08 FLT, FLTR, FLHR, FLHT, FLHX models

519.95 519.95 479.95

1802-0129 1861-0573

PART # DESCRIPTION CONVERSION MOUNT KIT 1861-0573 For 10 FLTRX/FLHX models with factory 2-into-1 exhaust 1802-0129 For 09-13 H-D FL Trike models 1

SUG. RETAIL

$19.95 79.95

Non sensor applications will require sensor port plug kit PART #1861-0464.

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING

DELUXE SLIP-ON MUFFLERS •Designed exclusively for the Harley-Davidson Tri Glide Ultra Classic and Street Glide Trikes •Slip-on mufflers yield significant improvements in both performance and ground clearance over the stock slip-on mufflers •Finished with a classy oval-shaped, stainless steel rolled-end treatment, mufflers are tuned for a deep and mellow exhaust note that’s perfect for listening to the stereo while cruising the interstate PART # 1801-0498

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

DESCRIPTION For 09-13 H-D FL Trike models

SUG. RETAIL $579.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0392

1801-0391

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1861-0593

1801-0400

BRAKES

1801-0390

TWIN SLASH SLIP-ON MUFFLERS

TANKS & OIL FILTERS

1861-0700

•This series of slip-on mufflers for touring models incorporates THE best of Vance & Hines and redefines performance, looks and price with a distinctive style and unmistakable sound that is only available here •Rounds offer a large 4-inch diameter muffler body with an all-mechanical straight through louvered baffle •Ovals are available in either a 41/2” version with an all-mechanical straight-through louvered baffle for generating power gains with an aggressive exhaust note or 51/2” “Monster” version which has won over touring riders across the country with their power gains and perfect sound •2-into-1 version was designed specifically to work with the new 2-into-1s on 10 Road Glide and Street Glide; features a large 4-inch, stepped to 41/2”, muffler body that uses an all new maintenance-free baffle that also minimizes heat discoloration and provides the perfect blend of sound and power gains •All feature the new signature Twin Slash end treatment •Sold in pairs unless noted •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR AND H-D FL TRIKE MODELS 1801-0392 Rounds, 4” $399.95 1801-0391 Ovals, 41/2” 539.95 1 1801-0390 Oval Monsters, 5 /2” (except H-D FL Trike models) 629.95 FOR 10 FLTRX/FLHX MODELS 1801-0400 Round 41/2” (ea.) 249.95

PART # DESCRIPTION OPTIONAL COMPONENTS 1861-0593 Opt. quiet insert (requires baffle mods) for Rounds 4” PART #1801-0382 (ea.) 1861-0700 Opt. quiet insert (requires baffle mods) for Ovals 41/2” PART #1801-0391 (ea.)

SUG. RETAIL

$21.95 39.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

355

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

EPA COMPLIANT TWIN SLASH SLIP-ON MUFFLERS •Distinguished by its EPA compliance stamping on the topside of the muffler, the EPA Compliant Twin Slash Slip-on mufflers are 50-state compliant when used on stock 96-cubic-inch displacement 09 and later Harley-Davidson Touring models equipped with stock 2-1-2 dual exhaust headers •Specially developed for compliance with Federal EPA noise regulations •Feature full-coverage heat shields for blue-proof protection and sport the signature Vance & Hines Twin Slash, 5.5” wide, oval tips •Sold in pairs •Made in the U.S.A. PART # 1801-0422

DESCRIPTION For 09-11 FLHT, FLHX, FLHR and FLTR (except 10 FLHX/FLTRX)

SUG. RETAIL $679.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0606

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

356

1801-0607

41/2” HI-OUTPUT SLIP-ON MUFFLERS •Designed specifically to address the needs of tuned motors built for high horsepower applications (high compression, large displacement, big cams) •Every aspect is singularly focused to yield maximum horsepower by improving the volumetric efficiency of heavily modified engines as well as stock •Race quality black ceramic or chrome •Compatible with Dresser duals, Power Duals and CVO drop skirt bags •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (PR.) 1801-0606 Chrome $649.95 1801-0607 Black 699.95 FOR 10 FLTRX/FLHX W/ 2-INTO-1 (EA.) 1801-0399 Chrome 324.95 OPTIONAL BAFFLES 1861-0606 Quiet baffle (ea.) 28.95

1801-0399 1861-0606

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

4 “ BLACKOUT ROUND SLIP-ON MUFFLERS •For the rider who commands a menacing presence •Coated with a durable high-temperature black ceramic finish, also include matte black CNC-machined end caps and matching Vance & Hines black riveted badges •For a completely blacked out look, add the Vance & Hines Dresser Duals in black •Compatible with CVO drop skirt bags PART # •Sold in pairs 1801-0393 •Made in the U.S.A.

FUEL/AIR SYSTEMS DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike

SUG. RETAIL $449.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0396

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0298

FRAMES, SUSPENSION & FENDERS

31/2” WIDOW SLIP-ON MUFFLERS •Treading deeper into the dark, Vance & Hines introduces Widow slip-on mufflers •Slip-on mufflers carry the signature look of the Vance & Hines Black line; race quality black ceramic coating with machined billet end caps and riveted Vance & Hines badge in chrome •The striking opposition of black and chrome makes a bold statement, enhancing the appeal of a Street Glide or any custom bagger, especially when matched with new Vance & Hines Dresser Duals Black •Night Rod version bestows some instant street cred with the same bold black and chrome combination to highlight this dark custom •Sold in pairs •Made in the U.S.A. PART # 1801-0396

DESCRIPTION For 95-13 FLHT, FLHX, FLTR, FLHR and H-D FL Trike models

SUG. RETAIL $619.95

PART # 1801-0298

DESCRIPTION For 06-13 VRSCD, VRSCDX and VRSCR models

SUG. RETAIL $509.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

357

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

Oval end caps

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0311 1801-0310

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0312

TANKS & OIL FILTERS 1801-0395

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

358

MONSTER SLIP-ON MUFFLERS •51/2” Monster Ovals crush the old saying that more power requires more noise •The ovalized mufflers give Monster Ovals twice the internal volume of other slip-on mufflers for better flow and more power •4” Monster Rounds offer the same perfection in and performances as the Monster Ovals •Stereo-friendly, Monster Mufflers yield a deep rich tone that’s perfect for those cross-country tours •Encased in full-coverage one-piece formed heat shields with machined end caps in chrome or black, riders will be proud to show off their pipes wherever the road takes them •Sold in pairs •Made in the U.S.A. MONSTER OVALS PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS 1801-0311 Chrome w/ chrome tips 1801-0310 Chrome w/ black tips 1801-0312 Black w/ chrome tips

Round end caps

MONSTER ROUNDS SUG. RETAIL $779.95 759.95 869.95

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS 1801-0395 Chrome w/ chrome tips

SUG. RETAIL $649.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

ROUND SLIP-ON MUFFLERS •One-of-a-kind “blue-proof” slash-cut, 4” tapered megaphone design for long-lasting looks •They don’t just look good, they are designed to perform •Slip-on design for easy installation •Dyno-tuned baffles and all mounting hardware included •Sold in pairs •Made in the U.S.A. PART # 1801-0182

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models

LUGGAGE SEATS & SISSY BARS

SUG. RETAIL $389.95

EXHAUST FUEL/AIR SYSTEMS

1861-0571

ENGINE TRANSMISSION & DRIVELINE

1861-0570

3” FISHTAIL SLIP-ON MUFFLERS •The ultimate in Fishtail design features massive non-blueing 21/2” diameter full-length heat shields with 220° of coverage •Finishing off each muffler are beautifully sculpted Fishtail II tips •Beneath the meticulously polished chrome are 3” muffler bodies with louvered core baffles •Sold in pairs •Made in the U.S.A. PART # 1801-0401 1861-0571 1861-0570

1801-0401

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR models 1.5” quiet baffle (ea.) 2.5” competition baffle (ea.)

SUG. RETAIL $499.95 29.95 29.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES V23068

1861-0603

V22897

TANKS & OIL FILTERS

4” CLASSIC TURN DOWN SLIP-ON MUFFLERS •High-volume, chrome slip-ons provide substantial power increases, improved fuel economy and crisper throttle response •All Classics provide the perfect sound from your Big Twin; not too loud, definitely not too quiet, and the baffles are removable •Systems include all necessary hardware and mounting instructions for a hassle-free, perfect fit every time •Optional quiet insert, requires baffle modifications, available separately •Sold in pairs •Made in the U.S.A. PART # 1801-0394

DASHES & GAUGES

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR and H-D FL Trike models

END CAPS AND BAFFLE FOR DRESSER MUFFLERS PART # DESCRIPTION V23068 End cap for straight-cut mufflers PART #V16721 (ea.) V23069 End cap for slash-cut mufflers PART #V16719 (ea.) 1861-0603 Opt. quiet insert (requires baffle mods) for PART #1801-0394 (ea.)

SUG. RETAIL $99.95 87.95

FRAMES, SUSPENSION & FENDERS

1801-0394

PART # V21274 V22897

DESCRIPTION Repl. baffle for PART #s V16723, V16721, V16719 (ea.) Repl. end cap O-ring (ea.)

SUG. RETAIL $499.95

SUG. RETAIL $17.95 7.95

14.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

359

SECTION

WINDSHIELDS & FAIRINGS TOURING TWIN SLASH 2-INTO-1 SLIP-ON MUFFLER •Designed specifically to work with the new 2-into-1 for the 2012 Dyna Switchback •Chrome slip-on features a large 4” muffler body with Vance & Hines’ signature twin slash end treatment •Uses an all new maintenance-free baffle that also minimizes heat discoloration •Twin Slash 2-into-1 slip-on gives you the perfect blend of performance and sound •Made in the U.S.A.

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

PART # 1801-0576

DESCRIPTION For 12-13 FLD

SUG. RETAIL $249.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0384

ELECTRICAL

1801-0552

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0404

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1801-0402

3” ROUND TWIN SLASH SLIP-ON MUFFLERS

FOOTRESTS & LICENSE PLATE FRAMES

PART # CHROME 1801-0384

WHEELS & AXLES

1801-0552 1801-0386 1801-0388

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

360

1861-0571

•Feature muffler bodies shielded by full-coverage heat shields for a blue-proof look •Increased performance with a throaty growl •Include standard louvered core baffles •Sold in pairs •Made in the U.S.A. DESCRIPTION

1861-0570 SUG. RETAIL

For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C (except FXSTD/FLSTSB/FLSTF/FLSTN) For 11-13 FXS Blackline For 07-13 FLSTF, 07 FXSTD For 07-13 FLSTN, 08-13 FLSTSB

$324.95 325.95 324.95 324.95

PART # DESCRIPTION CHROME (CONT) 1801-0404 For 91-13 Dyna (except 10-13 FXDWG and 08-13 FXDF, 12 FLD) 1801-0406 For 08-13 FXDF, 10-13 FXDWG 1801-0402 For 04-13 XL models

SUG. RETAIL

PART # 1861-0571

SUG. RETAIL $29.95

$324.95 324.95 324.95

REPL./OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

DESCRIPTION 1.5” quiet baffle (ea.)

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

3” ROUND TWIN SLASH SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1801-0385

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0553

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0405 1801-0403

1861-0571

1801-0553 1801-0387 1801-0389

DESCRIPTION

SUG. RETAIL

For 07-13 FXST/FLST, 10-13 FLSTSE, 08-11 FXCW/C (except FXSTD/FLSTSB/FLSTF/FLSTN) For 11-13 FXS Blackline For 07-13 FLSTF, 07 FXSTD For 07-13 FLSTN, 08-13 FLSTSB

PART # BLACK (CONT) 1801-0405

DESCRIPTION

$399.95 399.95 399.95 399.95

1801-0407 1801-0403

For 91-13 Dyna (except 10-13 FXDWG and 08-13 FXDF, 12 FLD) For 08-13 FXDF, 10-13 FXDWG For 04-13 XL models

SUG. RETAIL $29.95

PART # 1861-0571

DESCRIPTION 1.5” quiet baffle (ea.)

SUG. RETAIL

$399.95 399.95 399.95

REPL./OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1861-0570 PART # BLACK 1801-0385

TANKS & OIL FILTERS

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

361

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1494 1800-1498

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1496 1800-1499

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1495

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

362

COMPETITION SERIES 2-INTO-1 EXHAUST •Available in brushed stainless steel or black ceramic powder-coated stainless steel to provide significant weight savings over stock •Stepped headpipes and full merge collector for maximum performance •Tuned length megaphone •Slip fit collector joints with two dual swivel end retention springs •Racepack EGT fittings in both headpipes •Includes O2 sensor port plugs for non-sensor applications •Flat plane 12mm and quick access 18mm oxygen sensor ports for wideband tuning capability •Designed and made in the U.S.A.

1800-1497

1861-0605

NOTE: PART #s 1800-1060, 1800-1061, 1800-1062, 1800-1063 are not designed for use with OEM saddlebags. PART # DESCRIPTION BRUSHED STAINLESS STEEL 1800-1498 For 00-13 FXS/FXST/FLST models (except 09 FXSTSSE) 1800-1502 For 06-13 Dyna Glide models (except FLD) 1800-1500 For 04-13 XL models 1800-1494 For all 02-13 VRSC V-Rod models (except 06-08 VRSCR, 09-11 VRSCF) 1800-1496 For 09-13 VRSCF V-Rod Muscle

SUG. RETAIL

$784.95 773.95 749.95 754.95 805.95

PART # DESCRIPTION BLACK CERAMIC POWDER-COAT STAINLESS STEEL 1800-1499 For 00-13 FXS/FXST/FLST models (except 09 FXSTSSE) 1800-1503 For 06-13 Dyna Glide models (except FLD) 1800-1501 For 04-13 XL models 1800-1495 For all 02-13 VRSC V-Rod models (except 06-08 VRSCR, 09-11 VRSCF) 1800-1497 For 09-13 VRSCF V-Rod Muscle OPTIONAL BAFFLES 1861-0605 Quiet baffle (ea.)

SUG. RETAIL

$914.95 910.95 875.95 906.95 938.95 $23.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0281

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

COMPETITION SERIES SLIP-ON MUFFLERS •Designed specifically to provide the ultimate sound and performance for stock and big engines •21/2” stainless steel performance cores with billet CNC-machined end caps •Race tuned for maximum power and torque with a deep unique tone •Durable, black ceramic powder-coat finish •For use with stock headers or Vance & Hines True Dual Headers •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS 1801-0281 Slip-on mufflers $656.95

ENGINE

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS (CONT) 1861-0605 Quiet baffle (ea.) $23.95

TRANSMISSION & DRIVELINE 1861-0605

GASKETS & SEALS ELECTRICAL

LIGHTING COMPETITION SERIES SLIP-ON MUFFLERS

HANDLEBARS, CONTROLS & MIRRORS

•Quality lightweight construction; weighs only 14 pounds •Durable “Aluminum Oxide” finish, an exact match to the OEM heat shields •Tuned length provides increased horsepower •Baffles included •Fuel maps available •Improved ground clearance •Sold in pairs •Designed and made in the U.S.A. PART # DESCRIPTION FOR 09-13 VRSCF V-ROD MUSCLE 1801-0343 Slip-on mufflers

CABLES 1861-0605 1801-0343

SUG. RETAIL $599.95

PART # DESCRIPTION FOR 09-13 VRSCF V-ROD MUSCLE (CONT) 1861-0605 Quiet baffle (ea.)

BRAKES SUG. RETAIL $23.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SS2-R SYSTEM

WHEELS & AXLES

•Replaces the entire stock exhaust system •Aluminum SS2-R muffler is lighter than stock and increases performance •Made in the U.S.A. PART # V16535

DESCRIPTION For 00-06 Buell Blast models

SUG. RETAIL $229.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

363

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1560

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-1561

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

364

RSD SLANT 2-INTO-1 EXHAUST SYSTEMS •All stainless steel construction with carbon fiber end caps available in two finishes •Works Stainless/Carbon features a brushed stainless finish •Carbon Ops version features features a lightweight Gloss Carbon and Satin Black design that is dipped in the Black Ceramic for the toughest possible finish •All TIG welded with 18mm O2 sensor bungs; O2 plugs are not included but are available here in the EXHAUST SECTION if needed •Two step header pipes; 1.75” to 2.0” •Includes heat shields for rear cylinder and collector inlet, also includes exhaust port gaskets PART # DESCRIPTION SUG. RETAIL •Fiberglass and stainless steel wool baffle materials for high temperature resistance FOR 04-13 XL MODELS •Muffler body measures; 17” L x 10” W x 6” D 1800-1560 Stainless steel $895.95 •Includes mounting hardware and instructions 1800-1561 Carbon Ops 995.95 •Optional “DB Killer” sound insert provides a more toned down exhaust note 1861-0830 Opt. DB Killer sound insert 69.95 •Made in the U.S.A. We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0667 1800-0998

FUEL/AIR SYSTEMS

RSD TRACKER 2-INTO-1 EXHAUST SYSTEM™ •Roland Sands Design has teamed up with Vance & Hines to introduce a stylized, black ceramic 2-into-1 exhaust system •The RSD Tracker 2-into-1 Exhaust System™ fuses RSD styling and design with Vance & Hines racing performance •Beautifully hand-welded 2-into-1 headpipes boast a race-quality, high-temperature black ceramic coating •Carefully detailed and drilled chrome heat shields are minimalist and sleek •A chrome billet drilled exhaust tip with the RSD mark adds the PART # DESCRIPTION perfect finishing touch 1800-06671 For 07-11 FXS/FXST/FLST models (except •Manufactured from beginning to end by 08-11 FLSTB w/ OEM air cleaner, 09 FXSTSSE) Vance & Hines in Southern California 1 1800-0998 For 04-13 XL models NOTE: Not for use on models with saddlebags.

NOTE: Not for use with passenger footpegs.

ENGINE

SUG. RETAIL $779.95 779.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1268 Left side

BRAKES TANKS & OIL FILTERS

1800-1019

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 1800-1268 Right side

RSD TRACKER DUALS •RSD Tracker Duals begin with high-temp, black ceramic-coated headpipes that are contrasted with show-quality, chrome-plated Tracker-style heat shields for the signature RSD Contrast look •Headpipes are compatible with any 95-08 V&H or H-D slip-on muffler and are also the perfect match for the RSD Tracker Slip-on mufflers •Made in the U.S.A.

PART # 1800-1019 1800-1268

DESCRIPTION For 07-08 FLHT, FLTR, FLHX, FLHR models For 95-06 FLT, FLHT, FLTR, FLHX, FLHR models

WHEELS & AXLES SUG. RETAIL $598.95 599.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

365

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1313

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1314

PYTHON® THROWBACKS •13/4” dual-wall headpipes flow into 21/8” muffler bodies to create an aggressive throaty sound •System arrives completely wrapped and ready to ride with gray exhaust wrap and stainless steel zip ties pre-installed •Feature 21/2” straight-cut billet end accents that showcase the Python logo •Made in the U.S.A. PART # 1800-1479 1800-13141 1800-1480 1800-1313 1800-13121 V21869 1

DESCRIPTION For 12-13 FXS/FLS/FLST For 86-11 FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD) For 06-11 Dyna models (except 12-13 FLD) For 04-13 XL models Opt. quiet baffle (ea.)

SUG. RETAIL $504.95 499.95 504.95 499.95 499.95 29.95

1800-1312

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-1311 Left side

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

366

FISHTAIL DUALS •True dual system with 15/8” headpipes wrapped in 21/4” heat shields that flow into extra-long 21/8” mufflers under full coverage 21/2” heatshields •Show-quality chrome finish •Feature classic fishtail tips for a stylish lowrider-style Softail •Made in the U.S.A. PART # 1800-14811 1800-13111 1

DESCRIPTION For 12-13 FXS/FLS/FLST For 97-11 FXST/FLST (except 09 FXSTSSE)

1800-1311 Right side

SUG. RETAIL $804.95 799.95

Pre 07 models will require O 2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-0469

FUEL/AIR SYSTEMS ENGINE 1800-0241

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1681-0477

V21869

HANDLEBARS, CONTROLS & MIRRORS

DS-210449 7808-4002 7808-4001

CABLES

STAGGERED DUALS EXHAUST SYSTEMS •Developed and tested to increase performance throughout the entire rpm range •Headpipes are 13/4” and flow into 21/4” muffler bodies •Hidden crossover system improves scavenging for more horsepower and better sound •Come complete with full-coverage, full-length heat shields for a virtually blue-proof appearance •With heat shields installed, pipes have a burly 21/2” look •Replacement front and rear heat shields available; sold separately •Feature an embossed Python logo on rear pipe and removable baffles •All required mounting hardware and instructions are included •Made in the U.S.A.

BRAKES

Hidden crossover

1800-1472

DESCRIPTION For 12-13 FXS/FLS/FLST models For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) For 12-13 Dyna models (except 12-13 FLD)

SUG. RETAIL $518.95 518.95 518.95

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Pre 07 FXST/FLST models will require O2 sensor port plug kit PART #1861-0464 (sold separately). PART # 1800-1471 1800-0469

LIGHTING

Embossed logo PART # 1800-0241 DS-210449 1861-0477 V21869

DESCRIPTION For 06-11 Dyna models For 91-05 Dyna models Repl. baffle (ea.) Quiet baffle (ea.)

SUG. RETAIL $535.95 499.95 28.95 29.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

REPLACEMENT HEAT SHIELDS/BAFFLES PART # 1861-0355 1861-0356 1861-0323 1861-0324

DESCRIPTION Repl. front heat shield for PART #1800-0241 Repl. rear heat shield for PART #1800-0241 Repl. front heat shield for PART #1800-0469 and DS-210448 Repl. rear heat shield for PART #1800-0469 and DS-210448

SUG. RETAIL $149.95 128.95 164.95

PART # 7808-4001 7808-4002 1861-0477 V21869

DESCRIPTION Repl. front heat shield for PART #DS-210449 Repl. rear heat shield for PART #DS-210449 Repl. baffle (ea.) Quiet baffle (ea.)

SUG. RETAIL $159.95 137.95 28.95 29.95

169.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

367

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0493

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0274

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1861-0494

TANKS & OIL FILTERS 1861-0665

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

368

1800-0494

2-INTO-1 EXHAUST SYSTEMS •Hefty 21/8” 220° full-coverage headpipe heat shields •One-piece collector heat shield •Beautiful 31/2” muffler with custom scalloped, slash-cut end tip •Removable baffle and mounting hardware included •Made in the U.S.A. PART # 1800-04931 1800-0274 1800-04941 1861-0494

DESCRIPTION SUG. RETAIL For 86-11 FXS/FXST/FLST models (except 09 FXSTSSE) $485.95 For 06-11 Dyna models 485.95 For 04-13 XL models 485.95 Repl. baffle for PART #s 1800-0493/1800-0274/1800-0019 42.95

PART # 1861-0665 1

DESCRIPTION Repl. baffle for PART #s 1800-0494/1800-0089

SUG. RETAIL $44.95

Pre 07 models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1202

EXHAUST 1800-0740

FUEL/AIR SYSTEMS VENOM RADIUS

ENGINE

•Distinctive curves that are unforgettable •100% blue-proof with one-piece 21/2” 220° coverage heat shields with slash-cut ends for added style •Louvered core baffles deliver the big Python® sound; all at an incredible Python® value •Made in the U.S.A. PART # CHROME 1800-07401 1800-1202 BLACK 1800-12341 1

DESCRIPTION

TRANSMISSION & DRIVELINE

SUG. RETAIL

For 86-11 FXS/FXST/FLST models For 06-11 Dyna models

$599.95 599.95

For 86-11 FXS/FXST/FLST models

674.95

GASKETS & SEALS

1800-1234

ELECTRICAL

Pre 07 FXST/FLST models will require O2 sensor port plug kit PART #1861-0464 (sold separately).

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1802-0257

CABLES

BRAKES TRUE DUAL HEADERS •Complete a touring model exhaust system 1802-0257 with True Duals w/1801-0409 mufflers •Whether the bike already has a set of ® Python mufflers or is still running stock, True Duals will dramatically increase power and cut down the heat the stock crossover system generates on the right side •21/2” 220° full-coverage heat shields make this a blue-proof system •13/4” headpipes give the sound and performance you want •PART #1802-0257 accepts 09-13 OEM-style mufflers, PART #1800-0742 accepts 95-13 OEM-style mufflers •Conversion kit is required to mount systems on 10 FLHX/FLTRX with factory 2-into-1 exhaust systems •Adapter kit will extend True Dual headers for use on FL Trike models •Made in the U.S.A.

TANKS & OIL FILTERS 1800-0742 w/ 1801-0410 mufflers

PART # 1802-0257 1800-0742 1861-0573 1802-0129

FRAMES, SUSPENSION & FENDERS

1800-0742

NOTE: See new Python website, www.pythonperformance.com, for more details on the complete Python exhaust line. DESCRIPTION For 10-13 FLHT, FLHR, FLHX, FLTR and H-D FL Trike models For 07-08 FLHT, FLHR, FLHX and FLTR models Conversion kit for 10 FLHX/FLTRX models models with factory 2-into-1 exhaust Adapter kit for 09-13 H-D FL Trike models

FOOTRESTS & LICENSE PLATE FRAMES 1802-0129 SUG. RETAIL $429.95 399.95 19.95 79.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

369

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0582

SEATS & SISSY BARS EXHAUST 1801-0583

FUEL/AIR SYSTEMS ENGINE Billet tip w/ engraved logo

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0584

CABLES

BRAKES TANKS & OIL FILTERS

1801-0585

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

370

Angle cut tip can be rotated

4” SLIP-ON MUFFLERS WITH BILLET TIPS

•Large 4” diameter chrome muffler bodies •Innovative baffle technology features 2” baffles that provide free flowing exhaust •Baffles provide quiet idle and mellow cruising tones but more aggressive sound on demand, all with improved performance you can really feel •Custom machined billet exhaust tips are available in chrome or black finishes; both feature Python logo laser engraved for a unique and distinctive look •Angle Cut billet tips feature 30° angled radius ends that can be rotated on the mufflers bodies for rider’s preference of Slash-Up, or Slash-Down •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS 1801-0582 Straight cut, chrome 1801-0583 Straight cut, black

SUG. RETAIL $514.95 528.95

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR MODELS (CONT) 1801-0584 Angle cut, chrome 1801-0585 Angle cut, black

SUG. RETAIL $547.95 557.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0377

ENGINE

1801-0376 1861-0568

TRANSMISSION & DRIVELINE GASKETS & SEALS PREDATOR 31/2” SLIP-ON MUFFLERS •The latest top-shelf offering in the Python exhaust line •Feature 281/2” overall length chrome bodies •Includes billet end tips with machined channels for a look of understated style •Aggressive exhaust note attests to the marked gains you’ll feel in torque and horsepower •Available in oval or round •Matched with Python True Dual Headers, Predator Slip-on Mufflers make the ultimate true dual system •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0377 Oval w/ chrome end tips 1801-0376 Round w/ chrome end tips 1801-0437 Round w/ black end tips OPTIONAL BAFFLES 1861-0568 2.5” competition baffle for PART #s 1801-0376, 1801-0377 (ea.) 1861-0569 1.5” quiet baffle for PART #s 1801-0376, 1801-0377 (ea.)

ELECTRICAL

LIGHTING 1801-0437

HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL

CABLES

$594.95 494.95 531.95 29.95 29.95

BRAKES CNC billet tip

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

VIPER 31/2” SLIP-ON MUFFLERS •Striking in both performance and value, Viper Slip-on Mufflers pack loads of torque and horsepower into a gorgeous slash-cut chrome muffler •Round muffler design produces a deep and menacing growl that will truly do justice for your big-inch twin •Matched with Python True Dual Headers, Viper Slip-on Mufflers make for a stunning true dual system •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1801-0375 For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX) (pr.) $364.95 1861-0566 Opt. 2.5” competition baffle for PART #1801-0375 (ea.) 29.95 1861-0567 Opt. 1.5” quiet baffle for PART #1801-0375 (ea.) 29.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES 1801-0375 1861-0567

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

371

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

FISHTAIL 21/2” SLIP-ON MUFFLERS •Feature 21/8” muffler bodies wrapped in 21/2” chrome heatshields which match the OEM headpipe heatshields •Show-quality finish and style •Come standard with louvered core baffles or optional quiet baffles, sold separately •Match perfectly with Python True Dual headers or Vance & Hines Dresser Dual Headers for an ultimate system •Sold in pairs •Made in the U.S.A. PART # 1801-0522 1801-05251 V21869 1

1801-0522

DESCRIPTION For 09-13 FLHT, FLHX, FLHR, FLTR and H-D FL Trike models (except 10 FLHX/FLTRX) For 95-08 FLT, FLHT, FLHX, FLHR, FLTR models Optional quiet baffle (ea.)

SUG. RETAIL $499.95 499.95 29.95

V21869

Requires the use of Python True Duals or Vance and Hines Dresser Duals to ensure proper alignment and fitment.

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0409

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

372

PYTHON® 31/2” SLASH-CUT SLIP-ON MUFFLERS •High-velocity shielded muffler cores offer protection from heat discoloration while producing outstanding performance gains •Feature the Python logo on the top of each muffler •Slash-cut ends for a great appearance; baffles are removable •Include instructions and all mounting hardware •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0409 Scalloped $335.95 1801-0410 Backslash 357.95

1801-0410

1861-0567 PART # DESCRIPTION OPTIONAL/REPLACEMENT BAFFLES 1861-0566 Optional 2.5” competition baffle for PART #s 1801-0409/1801-0410 (ea.) 1861-0567 Optional 1.5” quiet baffle for PART #s 1801-0409/1801-0410 (ea.) 1861-0495 Repl. baffle for PART #s DS-202344/1801-0183 (ea.)

1861-0495 SUG. RETAIL

$29.95 29.95 57.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS 1861-0571

TOURING AUDIO & COMMUNICATION

1861-0570

BLACK MAMBA 3” SLIP-ON MUFFLERS •21/2” muffler bodies are clad in 3” black ceramic heat shields and are finished with chromed billet tips and laser-cut Python custom name badges with heavy-gauge rivets •Black Mambas produce a nice deep rumble sound with optional competition and quiet baffles available separately •Sold in pairs •Made in the U.S.A. PART # 1801-0523

LUGGAGE SEATS & SISSY BARS

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLTR, FLHR and H-D FL Trike models (except 10 FLHX/FLTRX)

SUG. RETAIL $547.95

OPTIONAL BAFFLES PART # 1861-0570

DESCRIPTION 2.5” competition baffle (ea.)

SUG. RETAIL $29.95

PART # 1861-0571

DESCRIPTION 1.5” quiet baffle (ea.)

SUG. RETAIL $29.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0378

1801-0382

1861-0570

BRAKES

MAMBA 3” SLIP-ON MUFFLERS •Blue-proof oversized slip-on mufflers for added performance and a deeper sound •Removable baffles with optional/replacement baffles also available separately •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION 1801-0378 For 07-13 FXST/B/C, FLST/C, 08-11 FXCW/C models 1801-0379 For 07-13 FLSTF models 1801-0380 For 07-13 FLSTN, 08-11 FLSTSB, 12-13 FLS models 1801-0382 For 91-13 FXD, 93-08 FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0381 For 08-13 FXDF, 10-13 FXDWG models 1801-0383 For 04-13 XL models OPTIONAL BAFFLES PART # DESCRIPTION 1861-0570 2.5” competition baffle (ea.) 1861-0571 1.5” quiet baffle (ea.)

CABLES

TANKS & OIL FILTERS

1861-0571

DASHES & GAUGES

SUG. RETAIL

FRAMES, SUSPENSION & FENDERS

$299.95 299.95

FOOTRESTS & LICENSE PLATE FRAMES

299.95

299.95 299.95 299.95

WHEELS & AXLES 1801-0383

SUG. RETAIL $29.95 29.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

373

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0255

ENGINE TRANSMISSION & DRIVELINE

1801-0254

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0256

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

374

21/2” SLASH-CUT SLIP-ON MUFFLERS

DS-202343

•Get the famous Python look and performance while still using the stock header pipes •Non-removable high-performance baffles •Brilliant chrome or black ceramic finish; all feature an embossed Python logo on each muffler •Come complete with all necessary mounting brackets and instructions •Sold in pairs •Made in the U.S.A. NOTE: Black headpipe heat shields are not included with black mufflers. PART # CHROME 1801-0255 1801-0254 1801-0256 DS-202343

DESCRIPTION For For For For

07-13 07-10 12-13 00-06

FLSTF models FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models FLS, 05-13 FLSTN, 08-11 FLSTSB models FXST, FLSTC models

SUG. RETAIL $249.95 249.95 249.95 229.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

21/2” SLASH-CUT SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1801-0257

FUEL/AIR SYSTEMS

1801-0087

ENGINE PART # CHROME (CONT) 1801-0257 1801-0087

DESCRIPTION

SUG. RETAIL

For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models

$249.95 249.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1801-0469

BRAKES TANKS & OIL FILTERS

1801-0470

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 1801-0471 PART # BLACk 1801-0469 1801-0470 1801-0471

DESCRIPTION

SUG. RETAIL

For 07-10 FXST/B/C, 07-13 FLSTC, 10-12 FLSTSE and 08-11 FXCW/C models For 91-13 Dyna Glide models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 04-13 XL models

$314.95 314.95 314.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

375

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0177

EXHAUST

1801-0178

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1801-0179

LIGHTING

1801-0180

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1801-0128

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

376

1801-0127

3” SLIP-ON MUFFLERS •Chrome-plated mufflers •Features steel baffles that are wrapped with a special insulating blanket for less “crackle” in the exhaust tone •Available in slash-cut, slash-out or slash-down styles •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-10 FXST/B/C, 07-13 FLSTC, 08-11 FXCW/C 1801-0177 Slash-cut $268.95 1801-0178 Slash-down 268.95 FOR 07-13 FLSTF, FXSTD 1801-0179 Slash-cut 268.95

PART # DESCRIPTION FOR 07-13 FLSTF, FXSTD (CONT) 1801-0180 Slash-down FOR 00-06 FXST/B/C/S, FLST/C 1801-0127 Slash-out 1801-0128 Slash-down

SUG. RETAIL $268.95 268.95 268.95

PART # DESCRIPTION FOR 84-99 FXST, FLST/C 1801-0129 Slash-out FOR 00-06 FLSTF, FXSTD 1801-0133 Slash-out 1801-0134 Slash-down

SUG. RETAIL $326.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

3” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE

1801-0132 1801-0131

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0285

TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0283

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0125 1801-0126

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0121

1801-0122

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

PART # DESCRIPTION FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0131 Slash-out 1801-0132 Slash-down FOR 08-13 FXDF, 10-13 FXDWG 1801-0283 Slash-down 1801-0285 Slash-out

SUG. RETAIL $268.95 268.95 275.95 275.95

PART # DESCRIPTION SUG. RETAIL FOR 91-13 FXD/FXDWG (EXCEPT 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0125 Slash-out $268.95 1801-0126 Slash-down 268.95 FOR 04-13 XL 1801-0121 Slash-out 275.95

PART # DESCRIPTION FOR 04-13 XL (CONT) 1801-0122 Slash-down FOR 86-03 XL 1801-0123 Slash-out 1801-0124 Slash-down

SUG. RETAIL $275.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

377

SECTION

WINDSHIELDS & FAIRINGS TOURING

1802-0105

AUDIO & COMMUNICATION

1802-0105 Right side

LUGGAGE 1802-0106

SEATS & SISSY BARS

1802-0105 Left side

EXHAUST FUEL/AIR SYSTEMS ENGINE

“DOUBLE BACK™” TRUE DUAL HEADER SYSTEMS •These are right off of Brian Klock’s “WFB” Discovery bike •Feature 13/4” front and rear header pipes with 21/4”, 220°-wrap heat shields •Accept 95-13 stock or aftermarket slip-on FLHT mufflers; check air cleaner clearance before installation •Headers include O2 sensor ports and are available with chrome or a mean black ceramic finish •Made in the U.S.A. NOTE: Headers will fit 10-13 models when used with 02 sensor bung adapter kits PART #s 1861-0608 or 1861-0594 (sold separately)

PART # DESCRIPTION SUG. RETAIL FOR 09 FLHT, FLHX, FLHR, FLTR MODELS 1802-0105 Chrome $529.95

PART # DESCRIPTION SUG. RETAIL FOR 09 FLHT, FLHX, FLHR, FLTR MODELS (CONT) 1802-0106 Black $574.95

TRANSMISSION & DRIVELINE GASKETS & SEALS Slash down

Slash out

ELECTRICAL

LIGHTING Slash 45˚ down/out

HANDLEBARS, CONTROLS & MIRRORS

Slash up w/ extensions

CABLES

BRAKES 1801-0327

TANKS & OIL FILTERS PLATINUM SERIES REVOLVER™ SLIP-ON MUFFLERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

378

•These 4” Slip-on Mufflers have a contoured slash-cut end which is adjustable to eight different positions (every 45 degrees) •Consistent with the Klock Werks exhaust and muffler line, these slip-on mufflers are not just another muffler adapted for use on touring/baggers – they are designed specifically for touring bikes and road use •The mufflers have a deep throaty rumble when profiling around town or under acceleration, but diminishes to a low hum under steady cruising – great for long trips •Proprietary baffle setup has been rigorously soundand performance-tested •The baffle extends to the front of the muffler body and actually clamps to the head pipe along with the body •Design allows exhaust gases to enter directly into the baffle and eliminates the hot spot discoloration that generally occurs mid-muffler or where the baffle traditionally starts inside of the muffler body •Provide long-lasting style without sacrificing performance •Sold in pairs •Made in the U.S.A.

Chrome w/ chrome end cap

Black w/ chrome end cap

Chrome w/black end cap

Black w/ black end cap

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0327 Chrome w/ chrome end caps $599.95 1801-0328 Chrome w/ black end caps 605.95 1801-0326 Black w/ chrome end caps 643.95 1801-0325 Black w/ black end caps 647.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0349 1801-0351 1801-0350

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0411

1801-0413

1801-0412

ENGINE

SUPER SAVER 4” SLIP-ON MUFFLERS •Great value and style in big, 4” slip-on mufflers with rolled-edge ends in three different designs and two lengths •Standard versions measure approximately 30” L; short versions are 2” shorter at approximately 28” L •All steel construction with flawless chrome finish •Feature 2” spiral-louvered fiberglass-wrapped baffles that are removable and repackable •Throaty rumble at idle and under acceleration; decreases to a low hum under steady cruising •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0349 Straight-cut, standard $369.95 1801-0411 Straight-cut, short 369.95 1801-0350 Forward slash, standard 369.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLHR, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) (CONT) 1801-0412 Forward slash, short $369.95 1801-0351 Back slash, standard 369.95 1801-0413 Back slash, short 369.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS Chrome w/ polished end cap

Chrome w/ black end cap

CABLES

BRAKES

1801-0313 Shown w/ 1860-0250 (sold separately)

TANKS & OIL FILTERS Black w/ black end cap

Black w/ polished end cap

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

WFB™ 4” PERFORMANCE SLIP-ON MUFFLERS

1801-0315 Shown w/ 1860-0254 (sold separately)

Chrome

Black

•Dyno-tested and road-proven, WFB Performance Mufflers are available in both chrome and black versions •Loaded with the same non-discoloring baffle technology as Revolver™ mufflers, with a similar sound range and a style all their own •Your choice of billet aluminum end caps (must be purchased separately) to customize your mufflers •Made in the U.S.A. PART # DESCRIPTION PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0313 Chrome 4” 1801-0315 Black 4”

SUG. RETAIL $387.95 419.95

STANDARD END CAPS (EA.) 1860-0250 Chrome 1860-0252 Black 1860-0254 Polished

Polished

SUG. RETAIL $68.95 73.95 58.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

379

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1157

FUEL/AIR SYSTEMS ENGINE 1800-1153

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1154

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1156

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

380

1800-1152

FIREPOWER SERIES EXHAUST •Feature 16-gauge steel construction throughout •13/4” headpipes with 21/2” muffler bodies •Includes mounting bracket and hardware •Heat shields and baffles included (not removable on FireSweep style) •Available with chrome or black finish •Made in the U.S.A. NOTE: O2 sensor plugs are included for pre-07 FXST/FLST applications. PART # DESCRIPTION FOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE) 1800-1157 FireFlight, black 1800-1153 FireFlight, chrome 1800-1158 FireSweep, black 1800-1154 FireSweep, chrome 1800-1156 FireStorm, black 1800-1152 FireStorm, chrome

1800-1175 SUG. RETAIL $599.95 569.95 599.95 569.95 599.95 569.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD, FXDWG W/ MID OR FORWARD CONTROLS (EXCEPT FLD) 1800-1162 FireFlight, chrome $569.95 1800-1167 FireSweep, black 599.95 1800-1163 FireSweep, chrome 569.95 FOR 04-13 XL W/ FORWARD CONTROLS 1800-1175 FireSweep, black 599.95 1800-1171 FireSweep, chrome 569.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1801-0434

1801-0433

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0631

1801-0499

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1801-0482

1801-0632

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1801-0483

1801-0481

3” FIREPOWER SERIES SLIP-ON MUFFLERS •Slip-on mufflers feature 16-gauge steel construction with polished chrome finish or black finish •Improves power and performance •2” baffles •Sold in pairs •Optional/replacement end caps (sold ea.) available separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST, FXSTB, FXSTC, FLSTC, 08-12 FXCW, FXCWC 1801-0433 Slashcut $299.95 1801-0434 Slash-down 299.95 1801-0436 Straight-cut w/ grooved, polished billet end caps 349.95 1801-0499 Straight-cut w/ grooved, black billet end caps 359.95 1801-0631 Straight-cut w/ fluted, black billet end caps 359.95 1801-0632 Slashcut w/ black slashcut end caps 359.95

PART # DESCRIPTION SUG. RETAIL FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0482 Slashcut $299.95 1801-0483 Slash-down 299.95 1801-0480 Straight-cut w/ grooved, polished billet end caps 349.95 1801-0481 Straight-cut w/ grooved, black billet end caps 359.95 1801-0633 Straight-cut w/ fluted, black billet end caps 359.95 1801-0634 Straight-cut w/ black slashcut end caps 359.95 3” FIREPOWER SERIES SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

381

SECTION

WINDSHIELDS & FAIRINGS

3” FIREPOWER SERIES SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0478

1801-0479

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1801-0635

1801-0477

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0636 1861-0756

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

382

PART # FOR 04-13 XL 1801-0478 1801-0479 1801-0476 1801-0477 1801-0635 1801-0636

DESCRIPTION Slashcut Slash-down Straight-cut Straight-cut Straight-cut Straight-cut

w/ w/ w/ w/

SUG. RETAIL

grooved, polished billet end caps grooved, black billet end caps black fluted billet end caps black slashcut end caps

$299.95 299.95 349.95 359.95 359.95 359.95

PART # DESCRIPTION SUG. RETAIL OPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS 1861-0756 Polished billet end cap grooved (ea.) $59.95 1861-0757 Black billet end cap grooved (ea.) 59.95 1860-0623 Black billet end cap w/ contrasting flutes (ea.) 69.95

1861-0757

1860-0623

1860-0625

PART # DESCRIPTION SUG. RETAIL OPTIONAL/REPLACEMENT END CAPS FOR STRAIGHTCUT MUFFLERS (CONT) 1860-0624 Black billet end caps w/ contrasting flutes (pr.) $129.95 1860-0625 Black slashcut end cap (ea.) 69.95 1860-0626 Black slashcut end caps (pr.) 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1504 1800-1085

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1506

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1505

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1508

CABLES

BRAKES

1800-1507

PRO-STREET SYSTEMS

TANKS & OIL FILTERS

•Feature 16-gauge steel construction throughout •13/4” headpipes step to 2”, then flow into 21/2” muffler bodies for increased flow and improved performance •Designed to increase low-end torque and produce a deep, throaty exhaust note •Includes mounting bracket and hardware •Heat shield sold separately unless noted •Available with chrome or temp black finish •Made in the U.S.A.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-1509

NOTE: Baffles for turn-out systems are welded in place; all others are removable. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE 1800-10851 Turn-out; chrome FOR 86-13 FXS/FXST/FLS/FLST MODELS (EXCEPT 09 FXSTSSE) 1800-15041, 2 Straight-cut; chrome 1800-15051, 2 Straight-cut; black 1800-15061, 2 Slash-cut; chrome 1800-15071, 2 Slash-cut; black 1800-15081, 2 Turn-out; chrome

SUG. RETAIL $569.95 639.95 679.95 599.95 639.95 599.95

PART # DESCRIPTION SUG. RETAIL FOR 86-13 FXS/FXST/FLS/FLST MODELS (EXCEPT 09 FXSTSSE) (CONT) 1800-15091, 2 Turn-out; black $639.95 1861-0393 Repl. chrome heat shields for 86-13 Softail models 139.95 FOR 06-13 FXDWG W/ FORWARD CONTROLS 1800-0645 Slash-cut; chrome 489.95 1861-0383 Opt. chrome heat shields 119.95 1 2

Includes heat shields. Includes O2 sensor plugs for pre-07 applications. PRO-STREET SYSTEMS continued on next page.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

383

SECTION

WINDSHIELDS & FAIRINGS

PRO-STREET SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1800-0645

ENGINE

1800-0665

TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1084

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0385

CABLES

BRAKES 1800-1011

TANKS & OIL FILTERS 1860-0627

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

384

1861-0394 PART # DESCRIPTION FOR 91-05 FXD W/ MID CONTROLS 1861-0384 Opt. chrome heat shields FOR 91-05 FXD W/ FORWARD CONTROLS 1800-0821 Slash-cut; chrome 1861-0383 Opt. chrome heat shields FOR 04-13 XL W/ FORWARD CONTROLS 1800-0665 Slash-cut; chrome 1800-0845 Slash-cut; temp black 1861-0394 Opt. chrome heat shields FOR 04-13 XL W/ MID CONTROLS 1800-1084 Slash-cut; black 1861-0385 Opt. chrome heat shields FOR 86-03 XL W/ FORWARD CONTROLS 1800-0840 Straight-cut; chrome

SUG. RETAIL $109.95 489.95 119.95 489.95 499.95 119.95 499.95 119.95 489.95

PART # DESCRIPTION FOR 86-03 XL W/ FORWARD CONTROLS (CONT) 1800-0647 Slash-cut; chrome 1861-0394 Opt. chrome heat shields FOR 86-03 XL W/ MID CONTROLS 1800-1011 Straight-cut; chrome 1800-0841 Slash-cut; chrome 1861-0456 Opt. chrome heat shields REPLACEMENT END CAP/BAFFLES (EA.) 1860-0627 Black billet aluminum end cap for PART # 18001504, 1800-1505 1860-0512 Baffle for PART #s 1800-0647, 1800-0840, 1800-0841, 1800-1011 1860-0514 Baffle for PART #s 1800-0645, 1800-0821, 1800-1504, 1800-1508, 1800-1509, 1800-1506, 1800-1505,

SUG. RETAIL $489.95 119.95 489.95 489.95 109.95

49.95 79.95 79.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1310

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0652

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0597

CABLES

BRAKES 1800-0847 1861-0599

TANKS & OIL FILTERS

RADIAL SWEEPERS •Performance stepped headers with radial rear section •Fabricated from 16-gauge double-wall steel •Direct bolt-on design for easy installation •Available with show-chrome or temp black finish •Made in the U.S.A. NOTE: Will not fit with passenger footpegs. EXHAUST SYSTEMS PART # FOR 04-13 XL 1800-13101 FOR 07-13 XL 1800-0652 1800-0847 FOR 04-06 XL 1800-0676 1800-1252 FOR 86-03 XL 1800-0651 1800-1253 1800-1309

DASHES & GAUGES 1861-0598

1861-0600

1860-0513

HEAT SHIELDS (2-PC.) DESCRIPTION

SUG. RETAIL

Black w/ chrome heat shield w/ holes

$699.95

Chrome Black

499.95 529.95

Chrome Black

499.95 529.95

Chrome Black Black w/ chrome heat shield w/ holes

499.95 529.95 699.95

PART # DESCRIPTION FOR 86-13 XL 1861-0597 Chrome 1861-0599 Chrome w/ holes 1861-0598 Black 1861-0600 Black w/ holes REPLACEMENT BAFFLES 1860-0513 Repl. baffles for all exhaust systems (pr.) 1

SUG. RETAIL $179.95 189.95 199.95 209.95 49.95

Includes oxygen sensor ports and plugs for non-sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

385

SECTION

WINDSHIELDS & FAIRINGS TOURING

1800-1201 Left side w/ fishtail muffler

AUDIO & COMMUNICATION

1800-1201 Right side w/ fishtail muffler

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

HUTCH SPECIAL TRUE DUAL HEAD PIPES AND SLIP-ON MUFFLERS

1801-0450 1801-0452

•16-gauge steel construction with highly polished chrome finish 1801-0453 •Front cylinder pipe routed to left side •Rear cylinder pipe is routed to right side •Full-coverage heat shields included •Require Bassani Softail mufflers (sold separately) •Headpipes include heatshields and muffler mounting brackets •All hardware mounting brackets included with headpipes PART # •Made in the U.S.A.

1801-0451

DESCRIPTION

NOTE: Header pipes and mufflers listed will not interchange with OEM components.

TRUE DUAL HEADER PIPES 1800-1201

PART # DESCRIPTION SLIP-ON MUFFLERS (PR.) 1801-0450 4” megaphone w/ billet end cap and standard 21/4” baffles 1801-0452 3” slash-cut w/ standard 2” baffles

SUG. RETAIL

$499.95 399.95

SUG. RETAIL

For 99-13 FXST/FLST

$549.95

PART # DESCRIPTION SUG. RETAIL SLIP-ON MUFFLERS (PR.) (CONT) 1801-0453 3” slant-cut w/ standard 2” baffles $399.95 1801-0451 3” fishtail w/ standard 2” baffles (non-removable) 419.95 1861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453 129.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

386

1800-0638 Right

1800-0638 Left 1801-0450

POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES FOR SOFTAILS •True-Dual crossover header systems perform as good as they look •Offer improved low-end torque, appearance and an unmistakable exhaust tone •Fabricated from 16-gauge steel, finished in show-quality chrome and supplied with custom-fit heat shields •Crossover system will only accept Bassani’s Softail slip-on mufflers (sold separately), featuring 16-gauge steel construction, removable flow-through baffles and show-chrome finish •All hardware and mounting brackets included with headpipes •Made in the U.S.A.

1801-0452

1801-0453

1801-0451

NOTE: Header pipes and mufflers listed will not interchange with OEM components. PART # DESCRIPTION CROSSOVER HEADER PIPES 1800-0639 For 07-13 FXST/FLST 1800-0638 For 89-06 FXST/FLST (except 95 Heritage)

SUG. RETAIL $489.95 489.95

PART # DESCRIPTION SLIP-ON MUFFLERS (PR.) 1801-0450 4” megaphone w/billet end cap and standard 21/4” baffles 1801-0452 3” slash-cut w/ standard 2” baffles 1801-0453 3” slant-cut w/ standard 2” baffles 1801-0451 3” fishtail w/ standard 2” baffles (non-removable) 1861-0759 Repl. baffles for PART #s 1801-0452, 1801-0453

SUG. RETAIL $499.95 399.95 399.95 419.95 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1358

ENGINE TRANSMISSION & DRIVELINE 1800-1359

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1360

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

B4 EXHAUST SYSTEMS •Feature 2-into-1 equal-length headers •Stepped 13/4” to 17/8” headpipes •Utilizes an advanced inner collector for maximum performance •Recommended for engines with up to 120 hp •Available with megaphone or straight muffler •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1358 W/ megaphone muffler, chrome 1800-1359 W/ megaphone muffler, black 1800-1360 W/ straight muffler, chrome 1800-1361 W/ straight muffler, black

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

SUG. RETAIL $859.95 879.95 859.95 879.95

1800-1361

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

387

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1512

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1513

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-1305

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

388

ROAD RAGE II MEGA POWER SYSTEMS

1800-1283

•Designed specifically to address the needs of tuned motors built for high horsepower applications •Features 2-into-1 equal-length 13/4”-17/8” stepped headpipes •Tapered megaphone-style muffler body with 4” polished or black billet end cap with contrasting machined flutes •Include full-coverage heat shields •Oxygen sensor ports and plugs (12mm and 18mm) •Include removable baffle •Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look; include matching non-functioning (no baffle) muffler with black billet end cap and contrasting flutes PART # DESCRIPTION SUG. RETAIL FOR 86-13 FXS, FXST, FLS, FLST 1800-1512 Chrome short megaphone w/ black billet end cap and contrasting machined flutes $699.95 1800-1513 Black short megaphone w/ black billet end cap and contrasting machined flutes 729.95 FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) 1800-1305 Chrome short megaphone w/ black billet end cap and contrasting machined flutes 679.95

PART # DESCRIPTION SUG. RETAIL FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) (CONT) 1800-1306 Black short megaphone w/ black billet end cap and contrasting machined flutes $699.95 FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1282 Chrome 879.95 1800-1283 Black 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION ROAD RAGE II MEGA POWER SYSTEMS (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1556

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-1557

GASKETS & SEALS ELECTRICAL

1800-1318

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0544

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1801-0549 PART # DESCRIPTION SUG. RETAIL FOR 04-13 XL W/ MID OR FORWARD CONTROLS 1800-15561 Chrome, short meg w/ chrome heat shields $699.95 1800-15571 Black, short meg w/ black heat shields 729.95 FOR 07-13 V-ROD MODELS (EXCEPT VRSCF) (STEPPED 13/4” TO 17/8” TO 2”) 1800-1317 Chrome, long meg w/ heat shields 699.95 1800-1318 Black, long meg w/ heat shields 739.95 OPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS 1801-0548 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1282), chrome 349.95

PART # DESCRIPTION SUG. RETAIL OPTIONAL PSEUDO LEFT-SIDE MEGAPHONE MUFFLERS (CONT) 1801-0544 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1282), chrome $349.95 1801-0549 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1283), black 359.95 1801-0545 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1283), black 359.95 REPLACEMENT BAFFLES 1861-0764 For PART #s 1800-1282, 1800-1283 79.95 1

Use on XL models with 11” or longer shocks only

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

389

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1558

EXHAUST 1800-1559

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1800-1510

GASKETS & SEALS ELECTRICAL 1800-1511

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

390

1800-1284

ROAD RAGE II B1 POWER SYSTEMS •Designed specifically to address the needs of tuned motors built 1800-1285 for high horsepower applications •Uses a unique extended inner collector maximizing performance •Features 2-into-1 equal-length stepped headpipes; systems for Dyna, Softail and Sportster feature 1-step headers, 13/4” to 17/8”; systems for V-Rod and FL models feature 2-step headers, 13/4” to 17/8” to 2” •4” straight-style performance muffler body with 21/2” x 161/2” baffle and billet end cap with contrasting machined flutes •Include full-coverage heat shields •Oxygen sensor port plugs also included for non-sensor applications •Optional Pseudo left-side megaphone mufflers available for Bagger models for that twin muffler look, and reducer bushings also included for required applications •Made in the U.S.A. PART # DESCRIPTION FOR 86-13 FXS, FXST, FLS, FLST 1800-1510 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-1511 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields FOR 95-13 FLHT, FLHR, FLHX, FLTR 1800-1284 Chrome w/ black billet end caps w/ contrasting flutes 1800-1285 Black w/ black billet end caps w/ contrasting flutes FOR 91-13 FXD, FXDWG W/ MID OR FORWARD CONTROL (EXCEPT FLD) 2 1800-1302 Chrome w/ black billet end cap, machined flutes and chrome heat shields 1800-13032 Black w/ black billet end cap, machined flutes and black heat shields

SUG. RETAIL $699.95 729.95 879.95 899.95 679.95 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING

ROAD RAGE II B1 POWER SYSTEMS (CONT)

AUDIO & COMMUNICATION LUGGAGE 1800-1366

SEATS & SISSY BARS 1800-1302

EXHAUST FUEL/AIR SYSTEMS

1800-1303

ENGINE TRANSMISSION & DRIVELINE

1800-1315

GASKETS & SEALS 1800-1320

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1801-0550

BRAKES

1801-0547 PART # DESCRIPTION FOR 86-13 XL 1800-15582 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-15592 Black w/ black billet end caps w/ machined contrasting flutes and black heat shields FOR 09-12 XR 1200/1200X 1800-1366 Black w/ black billet end caps w/ machined contrasting flutes FOR 07-13 VRSCAW, VRSCDX, VRSCX, 09-13 VRSCF 1800-13151 Chrome w/ black billet end cap w/ machined contrasting and chrome heat shields 1800-13161 Black w/ black billet end cap w/ machined contrasting and black heat shields FOR 02-05 VRSCA/B 1800-1319 Chrome w/ black billet end cap w/ machined contrasting flutes and chrome heat shields 1800-1320 Black w/ black billet end cap w/ machined contrasting flutes and black heat shields OPTIONAL PSEUDO LEFT-SIDE MUFFLER 1801-0550 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 1801-0546 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1284), chrome 1801-0551 For 09-13 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black 1801-0547 For 95-08 FLHT, FLHR, FLHX, FLTR (PART #1800-1285), black REPLACEMENT BAFFLE (EA.) 1861-0763 For PART #s 1800-1284, 1800-1285 OPTIONAL HEAT SHIELD 1861-0758 For 09-12 XR 1200/1200X (PART #1800-1366), black 1 2

SUG. RETAIL $699.95 729.95 649.95 699.95 739.95 699.95 739.95 349.95 349.95 359.95 359.95 79.95 199.95

Will not fit VRSCF models with passenger pegs. Use on XL models with 11” or longer shocks only.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

391

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1151

1800-1419

LUGGAGE SEATS & SISSY BARS 1800-1418

EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1164

1800-1280

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1307

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

392

1800-0657 1800-1281

ROAD RAGE 2-INTO-1 SYSTEMS •Stepped headers merge into a true reverse-cone megaphone muffler •13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance •4” muffler body with polished billet end cap (except where noted) •Removable spiral-core louvered baffle included •Include mounting hardware •Available in long (24”) and short (12”) muffler lengths with chrome or black finish •Heat shields included where noted •Made in the U.S.A. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE W/ FORWARD CONTROLS 1800-1089 Chrome, short meg w/ heat shields 1800-1090 Black, short meg w/ heat shields FOR 86-13 FXS/FXST/FLS/FLST (EXCEPT 09 FXSTSSE) 1800-11511 Chrome, long meg w/ heat shields 1800-12991 Chrome, short meg w/ heat shields 1800-11551 Black, long meg w/ heat shields 1800-13001 Black, short meg w/ heat shields FOR 12-13 FLD 1800-1418 Chrome w/ heat shields and black billet end cap w/ machined contrasting flutes 1800-1419 Black w/ heat shields and black billet end cap w/ machined contrasting flutes FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS 1800-1160 Chrome, long w/ heat shields 1800-1280 Chrome, short upswept meg w/ heat shields 1800-1307 Chrome, short upswept meg w/ heat shields (not stepped, 13/4” only) 1800-1164 Black, long w/ heat shields 1800-1281 Black, short upswept meg w/ heat shields

SUG. RETAIL $649.95 679.95 649.95 649.95 679.95 679.95

699.95 749.95 649.95 649.95 729.95 679.95 679.95

1800-1238

PART # DESCRIPTION FOR 06-13 FXD/FXDWG W/ FORWARD OR MID CONTROLS (CONT) 1800-1308 Black, short upswept meg w/ heat shields (not stepped, 13/4” only) FOR 91-05 FXD/FXDWG W/ FORWARD OR MID CONTROLS 1800-1278 Chrome, short upswept meg w/ heat shields 1800-1307 Chrome, short upswept meg w/ heat shields (not stepped, 13/4” only) 1800-1279 Black, short upswept meg w/ heat shields 1800-1308 Black, short upswept meg w/ heat shields (not stepped, 13/4” only) FOR 10-13 FLHT, FLHR, FLHX, FLTRX 1800-12372 Chrome w/ chrome header pipes, long w/ heat shields 1800-12382 Black, long w/ heat shields FOR 07-09 FLHT, FLHR, FLHX, FLTR 1800-0656 Chrome, long meg w/ silver ceramic headpipes 1800-0658 Black, long meg FOR 89-06 FLT, FLHT, FLHR, FLHX, FLTR 1800-0655 Chrome, long meg w/ silver ceramic headpipes 1800-0657 Black, long meg

SUG. RETAIL

$759.95 679.95 729.95 699.95 759.95

859.95 949.95 659.95 699.95 659.95 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

ROAD RAGE 2-INTO-1 SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1172

EXHAUST

1800-1168

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1251 1800-1249

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-1149

1800-1254

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES 1800-1277

1800-1276 PART # DESCRIPTION FOR 04-13 XL W/ MID OR FORWARD CONTROLS 3 1800-1168 Chrome, long meg w/ heat shields 1800-1272 Chrome, short upswept meg w/ heat shields 1800-11723 Black, long meg w/ heat shields 1800-1273 Black, short upswept meg w/ heat shields FOR 86-03 XL W/ MID OR FORWARD CONTROLS 1800-12483 Chrome, long meg w/ heat shields 1800-1270 Chrome, short upswept meg w/ heat shields 1800-12493 Black, long meg w/ heat shields 1800-1271 Black, short upswept meg w/ heat shields FOR 02-05 VRSCA/B W/ FORWARD CONTROLS 1800-1251 Chrome, long meg w/ heat shields

SUG. RETAIL $649.95 649.95 679.95 699.95 649.95 649.95 679.95 679.95 699.95

PART # DESCRIPTION FOR 02-05 VRSCA/B W/ FORWARD CONTROLS (CONT) 1800-1274 Chrome, short meg w/ heat shields 1800-1254 Black, long meg w/ heat shields 1800-1275 Black, short meg w/ heat shields FOR 07-13 V-ROD MODELS (EXCEPT VRSCF) 1800-1149 Chrome, long meg w/ heat shields 1800-1276 Chrome, short meg w/ heat shields 1800-1277 Black short meg w/ heat shields 1800-1298 Black, long meg w/ heat shields (stepped three times: 13/4” to 17/8” to 2”)

SUG. RETAIL $679.95 739.95 739.95

FOOTRESTS & LICENSE PLATE FRAMES

679.95 679.95 739.95

WHEELS & AXLES

739.95

HARDWARE, CHEMICALS & TOOLS

ROAD RAGE 2-INTO-1 SYSTEMS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS

COVERS, SECURITY & GENERAL

393

SECTION

WINDSHIELDS & FAIRINGS

ROAD RAGE 2-INTO-1 SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION 1801-0591

LUGGAGE SEATS & SISSY BARS

1801-0592

EXHAUST 1861-0387

FUEL/AIR SYSTEMS 1801-0593

ENGINE TRANSMISSION & DRIVELINE

1801-0594

1861-0392

GASKETS & SEALS

1861-0512

1861-0455

ELECTRICAL

1861-0609

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0610 1860-0494

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

394

PART # DESCRIPTION SUG. RETAIL OPTIONAL PSEUDO LEFT-SIDE MUFFLER 1801-0591 For 95-08 FLHT, FLHR, FLHX, FLTR (1800-0655, 1800-0656); chrome $349.95 1801-0593 For 09-13 FLHT, FLHR, FLHX, FLTR (1800-0656, 1800-1237); chrome 349.95 1801-0592 For 95-08 FLHT, FLHR, FLHX, FLTR (1800-0658, 1800-0657); black 349.95 1801-0594 For 09-13 FLHT, FLHR, FLHX, FLTR (1800-1238, 1800-0658); black 349.95 BAFFLES, HEAT SHIELDS AND END CAPS 1860-0543 21/2” i.d. performance baffle for PART #s 1800-0660, 1800-0650, 1800-1013, 1800-1287, 1861-0381 79.95 1861-0762 21/2” i.d. performance baffle for PART #s 1800-1149, 1800-1298 79.95 1 1860-0541 2” /2” i.d. quiet baffle for PART #s 1800-0655, 1800-0657, 1800-0656, 1800-0658, 1800-1237, 1800-1238 79.95 1861-0761 21/4” i.d. baffle for PART #s 1800-1151, 1800-1155, 1800-1160, 1800-1164, 1800-1172, 1800-1248, 1800-1248 79.95 1861-0389 2” i.d. quiet baffle for PART #s 1800-0655, 1800-0656, 1800-0658, 1800-0659, 1800-0660 79.95 1860-0518 2” i.d. quiet baffle for PART #s 1800-0659, 1800-0660, 1800-1092, 1800-1287, 1800-0839, 1800-1015, 1800-1094, 1800-1149 79.95 1860-0519 2” i.d. standard baffle for PART #s 1800-0663, 1800-0664, 1800-0831, 1800-0832, 1800-0826, 1800-1286 79.95 1861-0387 Opt. chrome heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 249.95 1861-0512 Opt. black heat shields for PART #s 1800-0655, 1800-0656, 1800-0657, 1800-0658 279.95 1861-0392 Opt. chrome heat shields for PART #s 1800-0660, 1800-0832 179.95

1860-0495

1860-0496

1860-0497

PART # DESCRIPTION SUG. RETAIL BAFFLES, HEAT SHIELDS AND END CAPS (CONT) 1861-0455 Opt. chrome heat shields for PART #1800-0839 $179.95 1861-0609 Opt. chrome heat shields for PART #s 1800-0831, 1800-0832 179.95 1861-0610 Opt. black heat shields for PART #s 1800-0831, 1800-0832 199.95 1861-0624 Opt. black heat shields for PART #s 1800-1092, 1800-1287 199.95 1860-0494 Opt. polished billet end cap w/ 1” lip for long mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95 1860-0495 Opt. black powder-coated end cap w/ 1” lip for long mufflers PART #s 1800-0650, 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-0825, 1800-1013, 1800-1087 (for chrome or black ceramic) (ea.) 69.95 1860-0496 Opt. polished billet end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95 1860-0497 Opt. black powder-coated end cap w/ 1/2” lip for short mufflers PART #s 1800-0663, 1800-0826, 1800-0831, 1800-0832, 1800-1089 (for chrome or black ceramic) (ea.) 69.95 1860-0532 Opt. black powder-coated end cap w/ contrasting machined flutes for PART #s 1800-0655, 1800-0656, 1800-0659, 1800-0660, 1800-1010, 1800-1087, 1800-1151, 1800-1160, 1800-1164, 1800-1168, 1800-1172, 1800-1248, 1800-1249, 1801-0184, 1801-0185, 1802-0119, 1810-2002, 1810-2003, 1861-0381 69.95 1 2 3

Includes O2 sensor bung plugs for pre-07 models. Included new-style 12mm and 18mm O2 sensor ports. Use on XL models with 11” or longer shocks only

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-1301 1800-1288

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1363

1800-1362

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-1364

TANKS & OIL FILTERS

1800-1365

DASHES & GAUGES

+P BAGGER STEPPED TRUE-DUALS SYSTEMS WITH POWER CURVE 13/4”

17/8”

•Features equal length into step headpipes with 4” straight muffler style •Include 12mm and 18mm oxygen sensor ports and plugs •Include full coverage headpipe heat shields •Produce a distinctive “stereo-friendly sound” •B1 style muffler utilizes advanced inner collector for maximum performance •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS 1860-0542

FOOTRESTS & LICENSE PLATE FRAMES

NOTE: 10 FLHX/FLTRX models will require PART #1861-0573 to properly mount. FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR PART # DESCRIPTION WITH MEGAPHONE-STYLE MUFFLER 1800-1288 Chrome w/ chrome end caps 1800-1301 Chrome w/ black powder-coat end caps 1800-1362 Black w/ polished end cap 1800-1363 Black w/ black end caps and contrasting flutes

SUG. RETAIL $999.95 999.95 1,099.95 1,099.95

PART # DESCRIPTION WITH B1-STYLE MUFFLER 1800-1364 Chrome w/ black end caps and contrasting flutes 1800-1365 Black w/ black end caps and contrasting flutes REPLACEMENT BAFFLES 1860-0542 Repl. 21/2” performance baffles (pr.)

SUG. RETAIL

$994.95 1,099.95 129.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

395

SECTION

WINDSHIELDS & FAIRINGS TOURING

1802-0125 Rear head pipe

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1802-0125 w/ 1801-0184 Megaphone mufflers

EXHAUST FUEL/AIR SYSTEMS ENGINE 1800-0653 Right

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-0653 Left

POWER CURVE TRUE-DUAL CROSSOVER HEADER PIPES •True Dual crossover header pipes perform as good as they look •Features proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder •Offers improved low-end torque and appearance •Fabricated from 16-gauge steel, finished in chrome or black and supplied with three custom-fit heat shields •Can be used with Bassani mufflers or most 09-12 OEM-style aftermarket mufflers (mufflers sold separately) •Includes 12mm and 18mm sensor ports and plugs •Made in the U.S.A.

1802-0249 w/ 1801-0579 mufflers PART # 1802-01252 1802-02492 1800-06541 1800-06531 1 2

DESCRIPTION For 09-13 FLHT, FLHR, FLHX, FLTR; chrome For 09-13 FLHT, FLHR, FLHX, FLTR; black For 07-08 FLHT, FLHR, FLHX, FLTR; chrome For L85-06 FLT, FLHT, FLHR FLHX, FLTR; chrome

SUG. RETAIL $499.95 549.95 469.95 469.95

Reuse two existing heat shields. Includes 12mm and 18mm sensor ports and plugs.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

396

1802-0248 Right w/ 1801-0333 mufflers

1802-0248 Left w/ 1801-0333 mufflers

BAGGER TRUE DUAL HEADPIPES •True dual headpipes with heat shields •Right-side pipe follows same clean lines as frame •Show-chrome or black finish •Can be used with Bassani mufflers or most 95-13 OEM-style aftermarket mufflers •Mounting instructions and hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLT, FLHT, FLHR, FLTR, FLHX 1 1802-0132 Chrome 1802-02481 Black 1

SUG. RETAIL $489.95 549.95

Includes 12mm and 18mm sensor ports and plugs.

1802-0132 w/ 1801-0505 mufflers

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0542 w/1861-0747 1801-0577

EXHAUST FUEL/AIR SYSTEMS ENGINE 1801-0543 w/1861-0747

TRANSMISSION & DRIVELINE

1861-0746

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0747 1861-0748

CABLES 4” SLIP-ON QUICK CHANGE SERIES MUFFLERS •Mufflers feature 16-gauge steel construction •Straight can-style muffler bodies to be used with choice of optional billet end caps (sold separately) •Distinctive aggressive exhaust sound •Improve power and performance •Slash cut end caps can be rotated for different looks •Sold in pairs (unless noted) •Made in the U.S.A.

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1861-0755 1861-0749

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1801-0542 Chrome $419.95 1801-0543 Black 439.95 FOR 12-13 FLD 1801-05771 Chrome w/ black billet end cap w/ contrasting flutes 299.95 OPTIONAL BILLET END CAPS (PR.) 1860-0622 Black billet end cap w/ contrasting flutes 129.95 1861-0746 Black tapered w/ contrasting flutes 129.95 1861-0747 Black straight w/ contrasting flutes 129.95

FRAMES, SUSPENSION & FENDERS PART # DESCRIPTION OPTIONAL BILLET END CAPS (PR.) (CONT) 1861-0748 Brightly polished slash cut 1861-0749 Black slash cut 1861-0750 Brightly polished tapered w/ flutes REPLACEMENT BILLET END CAPS (EA.) 1861-0751 Black tapered w/ contrasting flutes 1861-0752 Black straight w/ contrasting flutes 1861-0753 Brightly polished slash cut 1861-0754 Black slash cut 1861-0755 Brightly polished tapered w/ flutes 1

SUG. RETAIL $129.95 129.95 129.95 69.95 69.95 69.95 69.95 69.95

Single muffler.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

397

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1801-0500 1801-0506

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1801-0502

1801-0508

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0510 1801-0514

1801-0184

4” SLIP-ON MUFFLERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

398

•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome or black finish •Bolt to stock locations with supplied hardware •Sold in pairs •Made in the U.S.A. FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS PART # DESCRIPTION WITH 2” STANDARD BAFFLES 1801-0506 Slant cut, chrome 1801-0504 Scalloped slash-cut, chrome 1801-0500 Straight cut, chrome 1801-0502 Slant down, chrome 1801-0508 Scallop slant-cut, chrome 1801-0510 Inverted billet insert, chrome WITH 21/4” STANDARD BAFFLES 1801-0184 Megaphone, chrome w/ billet end cap 1801-0514 Megaphone, chrome w/ black billet end caps and contrasting flutes

SUG. RETAIL $489.95 499.95 469.95 489.95 499.95 519.95 519.95 549.95

PART # DESCRIPTION WITH 21/2” PERFORMANCE BAFFLES 1801-0185 Megaphone, chrome w/ billet end cap 1801-0333 Megaphone, black w/ billet end cap 1801-0515 Megaphone, chrome w/ black billet end caps and contrasting flutes 1801-0579 Megaphone, black w/ black billet end caps and contrasting flutes 1801-0507 Slant cut, chrome 1801-0505 Scalloped slash-cut, chrome 1801-0501 Straight cut, chrome 1801-0503 Slant down, chrome 1801-0509 Scallop slant-cut, chrome 1801-0511 Inverted billet insert, chrome

SUG. RETAIL $519.95 549.95 549.95 549.95 489.95 499.95 469.95 489.95 499.95 499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

4” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0333 1801-0579

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1801-0421

1801-0505

GASKETS & SEALS ELECTRICAL

LIGHTING 1801-0578

HANDLEBARS, CONTROLS & MIRRORS

1801-0516

1860-0542 1860-0494

CABLES

BRAKES

1860-0543

1801-0517 PART # DESCRIPTION FOR 10 FLHX, FLTRX MODELS 1801-0421 Megaphone, black w/ billet end cap (ea.) FOR 12-13 FLD 1801-0578 Megaphone, chrome w/ black billet end caps

SUG. RETAIL $299.95 299.95

PART # DESCRIPTION FOR 09-13 VRSCF MODELS 1801-0516 Straight cut, black w/ black billet end caps and contrasting flutes 1801-0517 Straight cut, chrome w/ black billet end caps and contrasting flutes

PART # DESCRIPTION REPLACEMENT BAFFLES AND END CAPS 1860-0515 Repl. 2” standard baffles for PART #s 1801-0186, 1801-0188, 1801-0265 1860-0603 Repl. 2” standard baffles for PART #s 1801-0500, 1801-0502, 1801-0504, 1801-0506, 1801-0508, 1801-0510 1860-0517 Repl. 21/4” standard baffles for PART #s 1801-0184, 1801-0332 1861-0765 Repl. 21/2” replacement baffles for PART #s 1801-0501, 1801-0503, 1801-0505, 1801-0507, 1801-0509, 1801-0511 1860-0542 Repl. 21/2” performance baffles for PART #s 1801-0185 1860-0543 2” I.d. baffle for PART # 1801-0421 (ea.) 1860-0541 21/2” I.d. baffle for PART # 1801-0421 (ea.) 1860-0494 Repl. polished billet end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.) 1802-0222 Repl. polished billet inverted end cap for PART #s 1801-0510, 1801-0511 (ea.) 1860-0495 Opt. black powder-coated end cap w/ 1” lip for long megaphone mufflers PART #s 1801-0184, 1801-0185, 1801-0332, 1801-0333 (ea.)

1860-0495 SUG. RETAIL

$579.95 550.95

SUG. RETAIL $129.95 129.95 129.95 129.95 129.95 79.95 79.95 69.95 99.95 69.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

399

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0354

1801-0353

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

31/2” SLIP-ON MUFFLERS •Slip-on mufflers feature 16-gauge steel construction •13/4” inlet fits stock and most aftermarket headpipes •Removable baffles •Include mounting hardware and instructions •Sold in pairs •Made in the U.S.A. PART # FOR 95-13 FLT, 1801-0353 1801-0354 1801-0355

1801-0355

DESCRIPTION SUG. RETAIL FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS Straight cut, chrome $299.95 Slash cut, chrome 299.95 Slant cut, chrome 299.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1861-0760 2” i.d. baffles for PART #s 1801-0353, 1801-0354, 1801-0355 (pr.) $129.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

400

CLASSIC FISHTAIL SLIP-ON MUFFLERS •Huge 31/2” inch body with a built-in baffle •Fit stock and most aftermarket head pipes •16-gauge steel construction with a show-chrome finish •Inlet to the fishtail has been increased to 21/4” and the fishtail outlet is wider to increase exhaust flow and improve power •Sound is deep and throaty but the classic fishtail is clearly audible •Sold in pairs •Made in the U.S.A. PART # 1801-0305

DESCRIPTION For 95-13 FLT, FLHT, FLHX, FLHR, FLTR

SUG. RETAIL $489.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1121 Left side

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

COVINGTONS HOT ROD TRUE-DUALS CROSSOVER SYSTEMS

GASKETS & SEALS

1800-1121 •Temp black 13/4” head pipes Right side •Full-coverage chrome heat shields with signature Covingtons-style holes that reveal the black pipes underneath •Chrome 4” megaphone-style mufflers with Covingtons black inlay billet end caps •Include removable baffles •Made in the U.S.A. PART # 1800-12691 1800-11212 1860-0542 1 2

DESCRIPTION For 10-13 FLHT, FLHR, FLTR, FLHX, FLTRX For L85-09 FLHT, FLHR, FLTR, FLT, FLHX Repl. 21/2” performance baffles (pr.)

ELECTRICAL SUG. RETAIL $1,295.95 1,296.95 129.95

LIGHTING

1860-0542

10 FLHX, FLTRX will require PART #1861-0573 to properly mount. O2 sensor port plugs included for non-sensor applications.

HANDLEBARS, CONTROLS & MIRRORS

1800-1122

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

COVINGTONS HOT ROD 2-INTO-1 SYSTEMS

FRAMES, SUSPENSION & FENDERS

•Inspired by Jerry Covington’s days in the hot rod era •Megaphone collector with turn-out end and removable baffle •Full-coverage heat shields with Covington-style holes •O2 sensor port plugs included for pre-07 models •Made in the U.S.A. PART # FOR 86-11 FXST/FLST, 91-11 DYNA AND 87-94 FXR 1800-1122 1800-1123

FOOTRESTS & LICENSE PLATE FRAMES

1800-1123

WHEELS & AXLES DESCRIPTION Black Chrome

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

401

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1802-0209 Left side

FUEL/AIR SYSTEMS ENGINE

1802-0209 Right side

1801-0564

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

402

1801-0569

TRU POWER HIGH-PERFORMANCE TRUE DUAL HEADERS AND MUFFLERS •The ultimate true dual performance exhaust system •Integrated five-step header design is dyno-perfected for maximum horsepower and torque gains •Mufflers are fully and properly tuned, no other slip-on muffler compares •Mufflers include CNC-machined billet “Stealth” tips in chrome or gloss black ceramic finish; tips will not discolor •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Stealth end caps feature gloss black ceramic coat finish •Headpipes only work with listed slip-on mufflers; mufflers will not fit OEM headpipes •Made in the U.S.A. PART # DESCRIPTION TRU POWER TRUE DUAL HEADERS 1802-0210 For 10-13 FLHT, FLHR, FLTR models 1802-0209 For 09 FLHT, FLHX, FLHR, FLTR models 1802-0208 For 07-08 FLHT, FLHX, FLHR, FLTR models 1802-0207 For 95-06 FLT, FLHT, FLHX, FLHT, FLTR models (except SE models)

SUG. RETAIL $609.95 609.95 609.95 609.95

PART # 3.5” MUFFLERS 1801-0564 1801-0565 4” MUFFLERS 1801-0568 1801-0569

1860-0549

1860-0552 DESCRIPTION

SUG. RETAIL

Chrome w/ gloss black ceramic tips Chrome w/ chrome tips

$429.95 429.95

Chrome w/ gloss black ceramic tips Chrome w/ chrome tips

449.95 449.95

OPTIONAL/REPLACEMENT LAC-STYLE END CAPS PART # FOR 3.5” MUFFLERS 1860-0549 1860-0550

DESCRIPTION (EA.) Gloss black ceramic Chrome

SUG. RETAIL $74.95 74.95

PART # DESCRIPTION FOR 4” MUFFLERS (EA.) 1860-0551 Gloss black ceramic 1860-0552 Chrome

SUG. RETAIL $89.95 89.95

TRU POWER TRUE DUAL EXHAUST HEADERS •Header pipes are dyno-designed to maximize torque and performance •21/8” diameter heat shields maximize style and the look •Provide balance and symmetry, giving your bike a tight, tough look •Beautiful triple chrome-plated hand-polished finish •For maximum performance gains use with our Tru Power slip-on mufflers (sold separately) or with any 95-13 OEM-style mufflers •Stainless steel mounting hardware and installation instructions included •Made in the U.S.A. PART # 1802-0206 1802-0090 1802-0089 1802-0088

DESCRIPTION 10-13 FLHT, FLHR, FLHX, FLTR 09 FLHT, FLHR, FLTR, FLHX 07-08 FLHT, FLHR, FLHX, FLTR 95-06 FLT, FLHT, FLHR, FLHX, FLTR

1802-0090

SUG. RETAIL $514.95 514.95 514.95 514.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0554

1801-0557

SEATS & SISSY BARS

1860-0556

EXHAUST 1860-0557 1801-0614

FUEL/AIR SYSTEMS

1801-0615

TRU POWER SLIP-ON MUFFLERS •Dyno perfected to optimize torque and performance •Sleek, no-weld design •Race-proven technology; perforated core baffles provide awesome sound and great acceleration •Beautiful hand-polished triple-plated chrome finish or new vibrant black ceramic coat that will take the heat without discoloring •Chrome mufflers include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish •Black ceramic coat mufflers include CNC-machined billet chrome “Stealth” tips or matching black ceramic coat finish tips •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Optional/replacement baffles available separately •Mufflers sold in pairs •Made in the U.S.A.

ENGINE TRANSMISSION & DRIVELINE

1860-0549

GASKETS & SEALS

1860-0552

FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS PART # DESCRIPTION 3.5” CHROME MUFFLERS 1801-0554 W/ gloss black exhaust tips 1801-0555 W/ chrome exhaust tips 3.5” BLACK CERAMIC COAT MUFFLERS 1801-0612 W/ chrome exhaust tips 1801-0613 W/ vibrant black ceramic coat exhaust tips 4” CHROME MUFFLERS 1801-0556 W/ gloss black exhaust tips 1801-0557 W/ chrome exhaust tips

SUG. RETAIL $429.95 429.95 509.95 509.95 449.95 449.95

PART # DESCRIPTION 4” BLACK CERAMIC COAT MUFFLERS 1801-0614 W/ chrome exhaust tips 1801-0615 W/ vibrant black ceramic coat exhaust tips OPTIONAL/REPLACEMENT BAFFLES FOR 3.5” MUFFLERS 1860-0555 Standard baffle (ea.) 1860-0556 Quiet baffle (ea.) OPTIONAL/REPLACEMENT BAFFLES FOR 4” MUFFLERS (EA.) 1860-0557 Standard baffle 1860-0558 Quiet baffle

SUG. RETAIL

PART # DESCRIPTION FOR 4” MUFFLERS (EA.) 1860-0551 Gloss black ceramic 1860-0552 Chrome

SUG. RETAIL

$519.95 519.95 99.95 112.95 99.95 112.95

OPTIONAL/REPLACEMENT LAC STYLE END CAPS PART # DESCRIPTION FOR 3.5” MUFFLERS (EA.) 1860-0549 Gloss black ceramic 1860-0550 Chrome

SUG. RETAIL $74.95 74.95

$89.95 89.95

1801-0558

TRU POWER 31/2” SLIP-ON MUFFLERS •Dyno perfected to optimize torque and performance •Work with stock or aftermarket exhaust headers that accept the stock mufflers •Sleek, no-weld design •Race-proven technology; perforated core baffles provide awesome sound and great acceleration •Beautiful hand-polished triple-plated chrome finish •Include CNC-machined billet “Stealth” tips in chrome or shiny black ceramic finish; tips will not discolor •Tips can be rotated 180° to show or hide the laser-engraved LA Choppers logo •Mounting hardware and instructions included •Optional/replacement baffles sold separately •Mufflers sold in pairs •Made in the U.S.A. PART # DESCRIPTION CHROME MUFFLERS W/ CHROME EXHAUST TIPS 1801-0558 For 07-13 FLSTF models 1801-0560 For 05-13 FLSTN, 08-11 FLSTSB models 1801-0562 For 07-10 FXST/B/C, 07-13 FLSTC and 08-11 FXCW/C models

SUG. RETAIL $399.95 399.95 399.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1801-0572 PART # DESCRIPTION CHROME MUFFLERS W/ CHROME EXHAUST TIPS (CONT) 1801-0574 For 91-13 Dyna Glide (except FLD, FXDF, 10-12 FXDWG) 1801-0572 For 08-13 FXDF, 10-13 FXDWG models 1801-0570 For 04-13 XL

SUG. RETAIL

$399.95 399.95 399.95

TRU POWER 31/2” SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

403

SECTION

WINDSHIELDS & FAIRINGS

TRU POWER 31/2” SLIP-ON MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION

1860-0553 1801-0563

LUGGAGE SEATS & SISSY BARS

1801-0571

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PART # DESCRIPTION CHROME MUFFLERS W/ GLOSS BLACK CERAMIC EXHAUST TIPS 1801-0559 For 07-13 FLSTF models 1801-0561 For 05-13 FLSTN, 08-11 FLSTSB models 1801-0563 For 07-10 FXST/B/C, 07-13 FLSTC and 08-11 FXCW/C models 1801-0575 For 91-13 Dyna Glide (except FLD, FXDF, 10-13 FXDWG) 1801-0573 For 08-13 FXDF, 10-13 FXDWG models 1801-0571 For 04-13 XL OPTIONAL/REPLACEMENT BAFFLES (EA.) 1860-0553 Standard baffle 1860-0554 Quiet baffle OPTIONAL/REPLACEMENT LAC-STYLE END CAPS (EA.) 1860-0549 Gloss black ceramic 1860-0550 Chrome

1860-0554

SUG. RETAIL $399.95 399.95 399.95 399.95 399.95 399.95 99.95 112.95 74.95 74.95

1860-0549

1860-0550

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

404

1800-0719

1800-0720

CUSTOM EXHAUST •Custom chopper pipes •187R exhaust feature a stepped header design (13/4” steps out to 21/4”) •187 Laser and Straight-cut exhaust feature a stepped design (13/4” steps out to 2”) and 2.25” dia. heat shields •Beautiful hand-polished chrome finish •Adds horsepower and allows cooler running •Mounting kit included; features a billet chrome transmission plate and necessary mounting hardware •187 Straight-cut exhaust systems can use optional custom exhaust tips for 2.15” I.D exhaust pipes (sold separately) •Include heat shields, baffles and mounts for O2 sensors unless noted •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 86-13 SOFTAIL MODELS 1800-0719 187 Lazer tip cut exhaust 1800-0720 187 Straight-cut tip exhaust FOR CUSTOM APPLICATIONS 1800-01961 187R exhaust w/ slash-cut tips for right-side drive custom applications 1

1800-0196

SUG. RETAIL $519.95 499.95

439.95

Do not include heat shields or O2 sensor mounts.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1325

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1326

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES OPEN LINE 2-INTO-1 SYSTEMS •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together in these 2-into-1 systems •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating •Systems feature Akrapovic’s in-house designed and tested, high-performance insert design for incredible power and famous sound – not old-school baffling •Systems include three-piece header, muffler body, heat shields, O2 sensor bung adapters and plugs, mounting hardware and complete installation instructions PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXS/FXST/FLS/FLST, 06-13 FLHT/FLHX/FLHR/FLTR MODELS 1800-1325 Chrome $799.95

TANKS & OIL FILTERS DASHES & GAUGES Performance insert

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXS/FXST/FLS/FLST, 06-13 FLHT/FLHX/FLHR/FLTR MODELS (CONT) 1800-1326 Black $799.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

OPTIONAL NOISE REDUCTION INSERTS •Optional insert enables you to adjust the noise level yourself •Available for 2-into-2 and 2-into-1 Akropovic systems only •Sold each PART # 1861-0744

DESCRIPTION For 2-into-2 systems

SUG. RETAIL $46.95

PART # 1861-0745

DESCRIPTION For 2-into-1 systems

SUG. RETAIL $34.95

1861-0744

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

405

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800-1327

LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1328

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1329

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

OPEN LINE 2-INTO-2 SYSTEMS •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic all come together here in these 2-into-2 systems •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating or Silicone-based black powder coating •Systems feature Akrapovic’s in-house designed and tested, high-performance silencer insert design for incredible power and famous sound – not old-school baffling •Systems include removable silencer inserts, heat shields and complete installation instructions PART # DESCRIPTION FOR 06-13 FXD/FXDWG MODELS 1800-1327 Chrome

SUG. RETAIL $799.95

FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

406

PART # DESCRIPTION FOR 06-13 XL MODELS W/ MID CONTROLS 1800-13281 Chrome 1800-13291 Black 1

WHEELS & AXLES

Silencer insert SUG. RETAIL $749.95 749.95

Not for use with passenger footpegs.

OPTIONAL NOISE REDUCTION INSERTS •Optional insert enables you to adjust the noise level yourself •Available for 2-into-2 and 2-into-1 Akropovic systems only •Sold each

1861-0744

PART # 1861-0744

DESCRIPTION For 2-into-2 systems

SUG. RETAIL $46.95

PART # 1861-0745

DESCRIPTION For 2-into-1 systems

SUG. RETAIL $34.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING 1801-0534

AUDIO & COMMUNICATION LUGGAGE 1801-0535

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0531 1801-0530

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0528

1801-0529

CABLES

BRAKES TANKS & OIL FILTERS SLIP-ON MUFFLERS •Just like the full systems, these are loaded with an exceptional array of Akropovic features •Unmatched European craftsmanship, outstanding performance, design, and of course the unmistakable deep resonant sound of Akrapovic; here with an Optional Sound Valve System that can even be adjusted on-the-fly •Highest quality materials are used throughout, including Austenitic (“surgical grade”) stainless steel along with show-quality chrome plating and Silicone-based black powder coating as listed •Optional Sound Valve Systems are available separately •Dresser muffler bodies with end cap measure 20” L (29” overall length with subheader pipe installed) and are 41/2” W x 31/2” T at polygonal exit that tapers to 31/2” round inlet end •Includes mufflers, subheaders with heat shields, clamps and complete installation instructions •Sold in pairs PART # DESCRIPTION SUG. RETAIL FOR 07-13 FLSTF/FLSTFB, 07 FXSTD MODELS 1801-0534 Chrome $1,149.95 FOR 07-10 FXST/B/C, 07-13 FLSTC, 08-11 FXCW/C MODELS 1801-0535 Chrome 1,149.95 FOR 06-13 FXD/FXDWG MODELS (EXCEPT 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) 1801-0531 Chrome 1,049.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXDF/10-13 FXDWG MODELS 1801-0530 Chrome $1,049.95 FOR 06-13 FLHT/FLHX/FLHR/FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1801-0528 Chrome w/ chrome tips 1,149.95 1801-0529 Chrome w/ black tips 1,149.95 SLIP-ON MUFFLERS continued on next page

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

407

SECTION

WINDSHIELDS & FAIRINGS SLIP-ON MUFFLERS (CONT) TOURING 1801-0532

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1801-0533

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

408

PART # DESCRIPTION FOR 06-13 XL MODELS 1801-0532 Chrome 1801-0533 Black

SUG. RETAIL $1,049.95 1,049.95

OPTIONAL SOUND VALVE SYSTEMS FOR SLIP-ON MUFFLERS

1861-0733

•The perfect complement to Akropovic’s Slip-On Muffler line allows riders to easily adjust for the sound level they want without ever leaving the bike, or getting their hands dirty •World Class design and function uses investment cast stainless steel housings and high-temperature graphite bearings throughout •Valve systems are cable-actuated through a hand control that is mounted on-bike where owner can reach it •At every setting there is still the unmistakable, deeply resonant sound of Akrapovic •Sold in pairs PART # 1861-0733 1861-0734 1861-0735 1861-0736 1861-0737 1861-0738

DESCRIPTION For mufflers PART For mufflers PART For mufflers PART For mufflers PART For mufflers PART For mufflers PART

#s 1801-0528, 1801-0529 #1801-0530 #1801-0531 #s 1801-0532, 1801-0533 #1801-0534 #1801-0535

1861-0733

SUG. RETAIL $449.95 449.95 449.95 449.95 449.95 449.95

Internal view

CATALYTIC CONVERTERS FOR AKRAPOVIC MUFFLERS •Honeycomb metal structure which incorporates precious metals (palladium, rhodium and platinum) into its surface •Metals convert the poisonous carbon monoxide and unburned hydrocarbons found in exhaust gases into non-toxic carbon dioxide and water vapor •Sold in pairs NOTE: Designed specifically for mufflers listed. PART # 1861-0740

DESCRIPTION For mufflers PART #s 1801-0530, 1801-0531, 1801-0532, 1801-0533

SUG. RETAIL $304.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS PHANTOM II EXHAUST SYSTEMS

TOURING

•Brand New Paul Yaffe-inspired design •Curvy 2:1 custom stylized pipe features 2” primary pipes flowing into a 3.5” collector •Black ceramic-coated with four-piece chrome heatshields •Rebuildable/removable baffle gives a great throaty roar •Passenger-friendly design •Made in the U.S.A. PART # 1800-1515 1800-1514

DESCRIPTION For 12-13 Softail/Dyna models For 07-11 Softail models, 06-11 Dyna models

AUDIO & COMMUNICATION

SUG. RETAIL $1,387.95 1,387.95

LUGGAGE 1800-1515

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS BAFFLED PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE

ENGINE

•Same wild 2:1 Phantom pipe by cutting-edge designer Paul Yaffe with a neighborhood-friendly baffle •2” primary pipes with a 3.5” collector body •Four-piece chrome stylized heat shields •Includes Domino billet end cap •Systems are SAE J2825 compliant •Made in the U.S.A. PART # 1800-1289

DESCRIPTION For 10-13 FLHT/FLHR/FLHX/FLTR

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1289 SUG. RETAIL $1,388.95

PART # 1800-12471 1

DESCRIPTION For L85-09 FLT/FLHT/FLHR/FLTR/FLHX

SUG. RETAIL $1,388.95

ELECTRICAL

O2 sensor port plugs included for non-sensor applications.

LIGHTING

1800-0533

1800-0167

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1800-0231

DASHES & GAUGES

PHANTOM PIPE EXHAUST SYSTEMS BY PAUL YAFFE

FRAMES, SUSPENSION & FENDERS

•Wild 2:1 pipe by cutting-edge designer Paul Yaffe •2” primary pipes with a 31/2” collector body •Four-piece chrome stylized heat shields •PYO signature claw tip end cut (unless noted) •Available in left side drive (LSD) or right side drive (RSD) •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXST/FLST MODELS (LSD) 1800-0533 Silver ceramic 1800-0534 Black ceramic FOR 86-06 FXST/FLST MODELS (LSD) 1800-0075 Silver ceramic 1800-0167 Black ceramic

FOOTRESTS & LICENSE PLATE FRAMES

1800-0232 SUG. RETAIL $1,120.95 1,120.95

PART # DESCRIPTION FOR CUSTOM SOFTAIL APPLICATIONS (RSD) 1 1800-0231 Black ceramic 1800-02321 Silver ceramic 1

1,120.95 1,120.95

SUG. RETAIL $1,120.95 1,120.95

Includes two O2 sensor ports with plugs.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

409

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-0537

SEATS & SISSY BARS

1800-0799

EXHAUST FUEL/AIR SYSTEMS 1800-0768

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1860-0061

THREE-SHIELD X PIPES BY PAUL YAFFE •The latest exhaust offering from world-class pipe builder Paul Yaffe and the SuperTrapp Road Legends series •Dramatically styled 2” shotgun drag pipes are available in triple-chrome-plated, black ceramic or silver ceramic finish •Comes complete with baffles, three chrome heat shields, end caps and mounting hardware •Made in the U.S.A.

1802-0039

NOTE: O2 sensor port plugs are included for 86-06 Softail and 04-06 XL applications. PART # DESCRIPTION FOR 86-11 FLST/FXST/FXS 1800-0536 Black ceramic 1800-0537 Silver ceramic FOR 06-11 DYNA GLIDE MODELS 1800-0798 Chrome-plated 1800-0799 Black ceramic 1800-0800 Silver ceramic FOR 91-05 DYNA GLIDE MODELS 1800-0236 Chrome-plated

SUG. RETAIL $986.95 1,007.95 955.95 986.95 1,007.95 955.95

PART # DESCRIPTION FOR 91-05 DYNA GLIDE MODELS (CONT) 1800-0237 Black ceramic FOR 04-13 XL 1800-0768 Chrome-plated 1800-0769 Black ceramic 1800-0770 Silver ceramic OPTIONAL COMPONENTS 1860-0061 Repl. baffles for all X-Pipes (pr.) 1802-0039 Ridged end caps

SUG. RETAIL $986.95 955.95 986.95 1,007.95 87.95 143.95

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

410

13871451

2” CRACK PIPES BY PAUL YAFFE •Paul Yaffe designed these drag pipes for SuperTrapp’s Road Legends Series •2” pipes with a straight-through design; no baffles (includes mounting hardware) •Available in triple chrome-plated or black ceramic finish •Three-piece spot heat shields: two on the rear pipe, one on the front pipe •Custom designed heat shields have decorative cutouts •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXS/FXST MODELS 1800-1147 Chrome 1800-1148 Black ceramic

1800-0008 SUG. RETAIL $924.95 945.95

PART # FOR 90-06 FXST MODELS 13871451 1800-0008

DESCRIPTION

SUG. RETAIL

Chrome Black ceramic

$924.95 945.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1146 1800-0538 w/ optional end caps

MEAN MOTHERS™ DRAG PIPES

EXHAUST

•SuperTrapp’s Mean Mothers are now meaner and more powerful •True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines •A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners 1800-0004 •OEM fasteners on heat shields can be “broken” to replace just the heat shield if necessary •Standard end caps included •Choose from optional slash-cut and turnout end caps; both are infinitely adjustable •Made in the U.S.A. NOTE: O2 sensor plugs included for 86-06 Softail and 04-06 XL applications. PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST 1800-0538 Shorty 1800-0539 Standard 1800-0540 Long 1800-0541 Staggered FOR 06-11 DYNA GLIDE 1800-1146 Staggered FOR 91-05 DYNA GLIDE 1800-0006 Standard

SUG. RETAIL $740.95 740.95 812.95 740.95 740.95

FUEL/AIR SYSTEMS ENGINE

1802-0000 PART # DESCRIPTION FOR 91-05 DYNA GLIDE (CONT) 1800-0005 Staggered FOR 07-08 FLHT/FLHX/FLHR/FLTR 1800-0542 Standard FOR 86-06 FLT/FLHT/FLH/FLHR/FLTR 1800-0004 Long FOR 04-13 XL 1800-0765 Staggered

SEATS & SISSY BARS

1802-0001 SUG. RETAIL $740.95 852.95 852.95

1802-0002

PART # DESCRIPTION REPLACEMENT COMPONENTS 1802-0000 Repl. standard end cap (ea.) 1802-0001 Optional turndown/ turnout end cap (ea.) 1802-0002 Optional slashdown/ slashout end cap (ea.)

SUG. RETAIL

TRANSMISSION & DRIVELINE GASKETS & SEALS

$43.95 43.95

ELECTRICAL

43.95

740.95

LIGHTING

740.95

1800-0962

1800-0965

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-0961

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-0963

BLACK MEAN MOTHERS™ DRAG PIPES

FOOTRESTS & LICENSE PLATE FRAMES

•True 21/2” stepped-performance pipes that post impressive performance gains on stock or built engines •A host of features: pre-installed, easy-to-remove baffles, sturdy and simple bracket system with fewer hardware pieces and pre-installed heat shields with OEM fasteners to replace just the heat shield if necessary •Standard end caps included •Made in the U.S.A.

WHEELS & AXLES

NOTE: O2 sensor plugs included for non-sensor applications. PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST 1800-0962 Shorty 1800-0965 Standard

SUG. RETAIL $740.95 740.95

PART # DESCRIPTION FOR 86-11 FXS/FXST/FLST (CONT) 1800-0961 Long 1800-0964 Staggered

SUG. RETAIL $740.95 740.95

PART # FOR 04-13 XL 1800-0963

DESCRIPTION Staggered

SUG. RETAIL $924.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

411

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1082

MEAN MOTHERS™ SIDE SWIPES •Side-swept look accentuates the lines of bike and angle of frame •13 lb. lighter than stock exhaust system •13/4” stainless steel headpipes •21/4” muffler bodies with removable baffles •One-piece heat shields •Includes standard chrome end caps •Made in the U.S.A. PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE 1800-1082 Chrome

1800-1081 SUG. RETAIL $719.95

PART # DESCRIPTION FOR 08-11 FXCW/C, 09 FXSTSSE (CONT) 1800-1081 Black ceramic

SUG. RETAIL $719.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

2-INTO-2 FAT DUALS SYSTEM •Designed like a pair of battleship deck guns that look great and sound even better •1.75” primary headpipes with 2.5” heat shields •3.5” chrome muffler bodies with removable grooved chrome billet end caps •Weigh 10% less than stock and include O2 sensor port plugs for pre-07 applications •Made in the U.S.A.

CABLES

BRAKES

PART # 1800-1083

TANKS & OIL FILTERS

DESCRIPTION For 86-11 FXS/FXST/FLST

SUG. RETAIL $986.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

412

2-INTO-2 STAGGERED INTERNAL DISC EXHAUST SYSTEM •Features SuperTrapp tunable 3” internal disc mufflers with chrome taper slash end caps •Durable steel construction with brilliant chrome-plating •Includes 18 3” discs per muffler body, mounting hardware and heat shields •End cap is interchangeable with any 3” SuperTrapp end cap •Uses OEM heat shields and mounting bracket •Made in the U.S.A. NOTE: Will fit 95-06 models if mounting bracket DS-209930 or DS-209931 is used. PART # 1800-1049

DESCRIPTION For 86-94 FXST/FLST

SUG. RETAIL $822.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

1802‑0118 108‑8021

1802‑0014

TOURING AUDIO & COMMUNICATION

1802‑0117 108‑7257 108‑8022

LUGGAGE 1800‑0958

1802‑0116

1802‑0016

1802‑0015

1802‑0017

1802‑0098

1802‑0018

1802‑0099

SEATS & SISSY BARS EXHAUST

2‑INTO‑1 LOW ROLLER EXHAUST SYSTEM •Chrome‑plated construction •Sleek, rolling‑wave style •Weighs 25% less than stock •Designed to increase exhaust flow and provide a deep Harley rumble •13/4” headpipes flow into 21/2” collector, then onto a 31/2” curved muffler body •Durable, pillow‑pack pacing offers superior silencing and durability •Includes chrome billet end cap, three‑piece heat shield set and O2 sensor port plugs for pre‑07 applications •Can be customized with optional end caps (sold separately) •Made in the U.S.A. SUG. PART # DESCRIPTION EXHAUST SYSTEM 1800‑0958 For 86‑11 FXS/FXST models STEEL END CAPS (ea.) 1802‑0014 Slash end cap 1802‑0118 Slash end cap, black 108‑8021 Fishtail end cap 108‑7257 Tapered end cap 1802‑0117 Tapered end cap, black (ea.) 108‑8022 Turnout/turndown end cap

RETAIL $924.95 99.95 76.95 99.95 54.95 76.95 99.95

FUEL/AIR SYSTEMS ENGINE 1802‑0035

PART # DESCRIPTION STEEL END CAPS (ea.) (CONT) 1802‑0116 Rolled, black (ea.) BILLET END CAPS (ea.) 1802‑0015 Fluted end cap 1802‑0016 Tapered end cap 1802‑0017 Grooved end cap 1802‑0018 Java Jug end cap PAUL YAFFE END CAPS (ea.) 1802‑0098 Holy Moly, black billet (ea.)

1802‑0036 SUG. RETAIL $76.95 99.95 99.95 99.95 99.95 139.95

1802‑0037

1802‑0038

PART # DESCRIPTION PAUL YAFFE END CAPS (ea.) (CONT) 1802‑0099 Holy Moly, chrome billet (ea.) 1802‑0035 Afterburner end cap, black billet 1802‑0036 Afterburner end cap, chrome billet 1802‑0037 Big Poppa end cap, chrome steel 1802‑0038 Claw end cap, chrome steel

SUG. RETAIL

$139.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

176.95 176.95

ELECTRICAL

121.95 121.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800‑0078

2‑INTO‑1 SUPERMEG SYSTEMS

TANKS & OIL FILTERS

•Increase horsepower while getting a glorious 1800‑1256 throaty exhaust note out of your exhaust •Straight‑through core design provides free‑flowing exhaust for crisp throttle response •Triple chrome plating or black ceramic finish •Integrated three‑piece heat shield that provides full coverage •Includes 20 4” discs, mounting bracket and hardware •Made in the U.S.A. NOTE: Not recommended for use on FXST/FLST models with Springer‑style saddlebags. PART # DESCRIPTION SUG. RETAIL FOR 12‑13 FXS/FXST/FLS/FLST MODELS 1800‑1372 Chrome $771.95 1800‑1373 Black ceramic 802.95 FOR 86‑11 FXS/FXST/FLST MODELS 1800‑0543 Chrome 771.95 1800‑0544 Black ceramic 822.95 FOR 90‑06 FXST/FLST MODELS 1800‑0078 Chrome 771.95 1800‑0551 Black ceramic 822.95 FOR 12‑13 DYNA GLIDE MODELS (EXCEPT FLD) 1800‑1374 Chrome 771.95 1800‑1375 Black ceramic 802.95

PART # DESCRIPTION SUG. RETAIL FOR 06‑11 DYNA GLIDE MODELS 1800‑0547 Chrome $771.95 1800‑0548 Black ceramic 822.95 FOR 91‑05 DYNA GLIDE MODELS 1800‑0078 Chrome 771.95 1800‑0551 Black ceramic 822.95 FOR 10‑13 FLHT/FLHR/FLTR MODELS 1800‑1255 Chrome 843.95 1800‑1256 Black ceramic 894.95 FOR 09 FLHT/FLHR/FLTR/FLHX MODELS 1800‑1052 Chrome 843.95 1800‑1053 Black ceramic 894.95

DASHES & GAUGES 1800‑1052 PART # DESCRIPTION SUG. RETAIL FOR 07‑08 FLHT/FLHR/FLTR/FLHX MODELS 1800‑0545 Chrome $843.95 1800‑0546 Black ceramic 894.95 FOR 85‑06 FLHT/FLT/FLHR/FLHX/FLTR MODELS 1800‑0076 Chrome 843.95 1800‑0550 Black ceramic 894.95 FOR 04‑13 XL MODELS 1800‑0766 Chrome 771.95 1800‑0767 Black ceramic 822.95 BAFFLE REPACKING KIT 1860‑0437 Fits all 2‑into‑1 Supermeg systems 28.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

413

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

V‑5 2‑INTO‑1 SLIP‑ON 3/4 EXHAUST SYSTEM •The ultimate pipe for your V‑Rod •SuperTrapp’s external disc technology is incorporated into the company’s first 5” pipe for motorcycles •Provides a significant horsepower increase and deep throaty exhaust note; mounts to the stock headpipe •Weighs a whopping 21 lb. less than the stock system and tips the scales at a mere 12 lb. •Tunable disc system gives the rider the flexibility to set up the pipe for a specific type of riding (includes 12 5” discs) •By adding discs, exhaust sound and top‑end power increase; 1800‑0272 by removing discs, low‑end torque increases and exhaust note decreases •Features triple‑chrome‑plated mid pipe, heat shield and canister, stainless steel core and polished billet aluminum end cap •Uses OEM headpipes •Made in the U.S.A. PART # 1801‑0295

DESCRIPTION For 07‑08 VRSCX/AW/AWA

SUG. RETAIL $976.95

PART # 1800‑0272

DESCRIPTION For 02‑06 VRSCA/B/SE models

SUG. RETAIL $976.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

2‑INTO‑1 MEGAPHONE SYSTEMS

4MSS‑70883

825‑71358

•Patented SuperTrapp tunable disc technology •Adjust sound levels and powerband by adding or removing 4” external discs •Includes 12 4” discs, rebuildable core and packing •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 91‑98 DYNA GLIDE 825‑71358 Satin, high exit $658.95

PART # FOR 86‑03 XL 4MSS‑70883 4MSS‑70884

4MSS‑70884

DESCRIPTION SUG. RETAIL (EXCEPT 883C, 1200C) Satin $616.95 Polished 699.95

1800‑0577

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800‑1223

BRAKES TANKS & OIL FILTERS 2‑INTO‑1 SILENT SERIES EXHAUST DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

414

FATSHOTS EXHAUST

1800‑0249

•2‑into‑2 system gives you a crisp throttle response and increased performance •Massive 2” diameter headpipes with high‑volume, disc‑tunable 4” SuperTrapp mufflers •Expertly finished in show‑quality chrome will definitely set a bike apart from the crowd •Includes 12 4” discs per muffler body and all required mounting hardware •Made in the U.S.A. PART # DESCRIPTION 1800‑12231 For 86‑11 FXS/FXST/FLST shotgun style 1800‑0249 For custom applications w/ 300/330mm wide tire (right side drive upswept shotgun‑style) 1

O2 sensor plugs included for non‑sensor applications.

SUG. RETAIL $1,017.95 1,110.95

1800‑0578

•Return your bike to near stock sound levels without returning to stock performance •Available in both tunable Megaphone and non‑tunable straight body designs •2:1 head pipe designs for maximum performance •2.5” collector provides maximum flow even on big‑bore motors •Three‑piece full‑coverage heat shields prevent blueing •Rebuildable core and packing •Includes 14 4” discs and mounting hardware •Made in the U.S.A. NOTE: Not recommended for use with Springer‑style saddlebags. PART # DESCRIPTION FOR 86‑11 FXS/FXST/FLST 1800‑05771 Straight 1800‑05791 Megaphone FOR 250MM WIDE TIRE APPLICATIONS W/ O2 SENSORS 1 1800‑0580 Straight 1800‑05781 Megaphone 1

SUG. RETAIL $822.95 822.95 822.95 822.95

O2 sensor plugs included for non‑sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 2-INTO-1 INTERNAL DISC EXHAUST SYSTEM

2-INTO-2 CROSSOVER EXHAUST SYSTEM

•Features SuperTrapp tunable 3” internal disc muffler with fishtail end cap •Durable steel construction with brilliant chrome plating •Includes O2 sensor ports •System includes 12 4” discs, mounting hardware and heat shields •End cap is interchangeable with any 3” SuperTrapp end cap •Made in the U.S.A.

•Features SuperTrapp tunable 3” internal disc mufflers with fishtail end caps •Durable steel construction with brilliant chrome plating •System includes 24 3” discs, mounting hardware and heat shields •End caps are interchangeable with any 3” SuperTrapp end cap •Made in the U.S.A.

PART # 1800-0552

DESCRIPTION For 07-11 FXS/FXST/FLST

SUG. RETAIL $955.95

PART # 62878082

DESCRIPTION For 97-06 FLST/FXST

SUG. RETAIL $1,706.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

XR-STYLE SYSTEM •Built of 304 series stainless steel (pipes turn a beautiful gold finish after being run) •13/4” headpipes exit into true reverse-cone megaphone mufflers •21/2” straight-through repackable cores (12 discs per pipe) •O2 sensor plugs included for non-sensor applications •Awesome sound and performance •Made in the U.S.A. PART # 1800-0771 81570883

DESCRIPTION For 04-13 XL For 86-03 XL (except 883C, 1200C)

SUG. RETAIL $924.95 924.95

1802-0126

ELECTRICAL

2-INTO-2 MEGAPHONE SYSTEM •Increase horsepower while getting a glorious throaty exhaust note •Satin-finished stainless steel •Include mounting bracket, 24 4” discs and hardware •Made in the U.S.A. PART # 1800-1111

DESCRIPTION For 09-12 XR1200/1200X

SUG. RETAIL $1,048.95

1802-0126

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1802-0096

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

2-INTO-2 TRUE DUAL HEADPIPES •Design adds a unique style •Include 2.25” chrome heat shields •Fit SuperTrapp SE series, Kerker FatShots slip-ons, SuperTrapp/Kerker Stouts or other 95-13 style mufflers •Hardware included •Made in the U.S.A. PART # DESCRIPTION CHROME HEAT SHIELDS 1802-0126 For 10-13 FLHT/FLHR/FLHX/FLTR 1802-0097 For 09 FLHT/FLHR/FLHX/FLTR 1802-00961 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR

FOOTRESTS & LICENSE PLATE FRAMES

1802-0096

SUG. RETAIL $513.95 513.95 462.95

PART # DESCRIPTION BLACK HEAT SHIELDS 1802-0256 For 10-13 FLHT/FLHR/FLHX/FLTR 1802-0255 For 09 FLHT/FLHR/FLHX/FLTR 1802-02541 For 86-08 FLT/FLHT/FLHR/FLHX/FLTR 1

SUG. RETAIL $513.95 513.95 462.95

O2 bung plugs included for non-sensor applications.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

415

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1801‑0519

LUGGAGE

STOUT SLIP‑ON MUFFLERS •Massive 4” non‑tunable chrome or black ceramic bodies •Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled •Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes •Provide a heavy, broad spread power curve with horsepower and torque gains over stock mufflers •Minimally (2 dB) louder than stock •Sold in pairs •Made in the U.S.A.

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

MEAN MOTHERS™ SLIP‑ON MUFFLERS •Same throaty drag pipe sound as the original Mean Mothers™ •21/4” stainless steel muffler bodies with black billet end caps •23/4” chrome replaceable heatshields are pre‑installed •33% weight savings and hp gain over stock mufflers •Sold in pairs •Made in the U.S.A. PART # 1801‑0435

DESCRIPTION For 09‑13 FLHT/FLHR/FLHX/FLTR and H‑D FL Trike models w/ dual exhaust

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

416

$534.95

SUG. RETAIL

PART # DESCRIPTION SUG. RETAIL FOR 95‑09 FLT/FLHT/FLHR/FLHX/FLTR 1801‑0519 Chrome $699.95 1801‑0586 Black 709.95

$699.95 709.95

1801‑0105 1801‑0424

ELECTRICAL

LIGHTING

PART # DESCRIPTION FOR 10‑13 FLHT/FLHR/FLHX/ FLTR (EXCEPT 10 FLHX/FLTRX) 1801‑0518 Chrome 1801‑0587 Black

SUG. RETAIL

1801‑0586

1802‑0015

1802‑0016

1801‑0104

SUPER ELITE 31/2” SLIP‑ON MUFFLERS •Race‑proven mechanical baffle for more horsepower and torque at less than 3 dB over a stock exhaust system •Internal heat shields completely eliminate body blueing •Expertly finished and chrome‑plated •Personalize the look with 12 different styles of end caps •End caps must be purchased separately •Made in the U.S.A. SUG. PART # DESCRIPTION SLIP‑ON MUFFLERS 1801‑0424 For 10 FLHX/FLTRX (ea.) 1801‑0373 For 10‑13 FLHT/FLHX/FLHR/FLTR (except 10 FLHX) (pr.) 1801‑0104 For 95‑09 FLHT/FLHX/FLHR/FLTR (pr.) 1801‑0105 For 97‑03 FLSTS, 05‑07 FLSTSC (pr.) PART # DESCRIPTION BILLET END CAPS (EA.) 1802‑0015 Fluted 1802‑0016 Tapered 1802‑0017 Grooved 1802‑0018 Java Jug STEEL END CAPS (EA.) 1802‑0014 Slash 1802‑0118 Slash, black

PART # FOR 06‑13 VRSCD/VRSCR 1800‑0572 1800‑0571

108‑8022

108‑7257

1802‑0118

1802‑0117

1802‑0116

$277.95 421.95 421.95 421.95

$99.95 99.95 99.95 99.95 99.95 76.95

•4” diameter adds a massive look •Patented SuperTrapp tunable disc technology allows you to adjust sound levels and powerband by adding or removing 4” external discs (24 included) •Black ceramic or chrome‑plated •Sold in pairs •Made in the U.S.A.

108‑8021

1802‑0014

1802‑0018

RETAIL

SUG. RETAIL

FATSHOTS SLIP‑ON MUFFLERS

1802‑0017

1802‑0098

1802‑0099

PART # DESCRIPTION STEEL END CAPS (EA.) (CONT) 108‑8021 Fishtail 108‑8022 Turnout/turndown 108‑7257 Tapered 1802‑0117 Tapered, black 1802‑0116 Rolled, black YAFFE END CAPS (EA.) 1802‑0098 Holy Moly, black billet

1802‑0035 1802‑0036 SUG. RETAIL $99.95 99.95 54.95 76.95 76.95

PART # YAFFE END 1802‑0099 1802‑0035 1802‑0036 1802‑0037 1802‑0038

1802‑0037

1802‑0038

DESCRIPTION SUG. RETAIL CAPS (EA.) (CONT) Holy Moly, chrome billet $139.95 Afterburner, black billet 176.95 Afterburner, chrome billet 176.95 Big Poppa, chrome billet 121.95 Claw, chrome billet 121.95

139.95

1800‑0572

1801‑0341

DESCRIPTION

SUG. RETAIL

Black ceramic Chrome

$616.95 637.95

PART # DESCRIPTION FOR 95‑13 FLT/FLHT/FLHR/FLHX/FLTR (EXCEPT 10 FLHX) 1801‑0341 Chrome

SUG. RETAIL $555.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING 728-78053

AUDIO & COMMUNICATION 628-78053

728-78054

LUGGAGE CHROME MEGAPHONE MUFFLERS

628-78054

SLIP-ON MUFFLERS

•3” chrome slip-on mufflers in tapered, fishtail or turnout styles •End caps are interchangeable with any 3” cap •Each muffler includes 12 internal discs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR (EXCEPT 10 FLHX) 628-78053 Turnout/turndown (pr.) 628-78054 Fishtail (pr.) 628-78055 Tapered (pr.)

SUG. RETAIL

•The epitome of style and performance in a tunable system that lets you determine tone and torque •Available in straight or slash-cut styles •Include 12 4” discs per muffler •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLT/FLHT/FLHX/FLHR/FLTR (EXCEPT 10 FLHX) 728-78053 Straight style 728-78054 Slash-cut style

SUG. RETAIL $658.95 658.95

$719.95 719.95 637.95

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

•SuperTrapp’s internal-disc chrome slip-ons let you tune your exhaust for sound and back pressure at a very affordable price •Use with OEM headpipes to create a staggered dual system with SuperTrapp performance, sound and looks •Includes 12 3” inch discs per muffler •End caps are interchangeable with any 3” SuperTrapp end cap (except fishtails) •Made in the U.S.A. PART # DESCRIPTION 628-78088 For 99-13 Dyna Glide models (except FXDF, 10-13 FXDWG)

GASKETS & SEALS ELECTRICAL

LIGHTING

SUG. RETAIL $565.95

S/C ELITE UNIVERSAL MUFFLERS •Chrome-plated T-304 stainless steel body •Corrosion-resistant stainless steel perforated core •U.S. Forest Service approved spark arrestor design •Available in 17” or 19” lengths •Adjust sound levels and powerband by adding or removing 4” or 5” external discs (not included) •Sold each •Made in the U.S.A.

•Mufflers feature tunable 3” internal discs (12 discs in each muffler) •Beautiful triple nickel chrome-plated finish •End caps are interchangeable with any 3” SuperTrapp end cap •Repackable fiberglass baffle •Sold in pairs •Made in the U.S.A. DESCRIPTION For 97-03 FLSTS, 05-07 FLSTSC

SUG. RETAIL $719.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

DESCRIPTION

SUG. RETAIL

1.75” i.d. inlet; uses 4” discs 2.00” i.d. inlet; uses 4” discs 2.25” i.d. inlet; uses 4” discs

$349.95 349.95 349.95

2.50” i.d. inlet; uses 5” discs

483.95

•4” polished stainless steel muffler measures 191/8” long with a 2” inlet •Universal mounting fits any style header pipes •Accepts any 4” accessories/ replacement parts •Sold each •Made in the U.S.A. DESCRIPTION 4” polished muffler

SLIP-ON FISHTAIL MUFFLERS

PART # 628-78056

UNIVERSAL 4” MEGAPHONE MUFFLER

PART # 426-20010

EXHAUST

ENGINE

TAPERED CHROME SLIP-ON MUFFLERS

PART # 17” MUFFLER 1802-0031 1802-0032 1802-0033 19” MUFFLER 1802-0034

SEATS & SISSY BARS

SUG. RETAIL $277.95

STAINLESS STEEL IDS SLIP-ON

DASHES & GAUGES

•A durable, highperformance slip-on designed specifically for Buell •Offset saddle bracket mount system developed with data from H-D life cycle testing •Internal disc design (includes 15 4” discs) means full adjustability and no soot deposits •Bolts directly to stock Z bracket; beautiful brushed finish •Made in the U.S.A. PART # 725-71235

DESCRIPTION For 99-02 S3, X1, 98 M2, S1

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES SUG. RETAIL $576.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

417

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

UNIVERSAL 3” CHROME MUFFLER •13/4”

i.d. for mounting on any style headpipes •Includes a slider bracket welded onto the back side for universal mounting •Accepts any 3” accessories/ replacement parts •145/8” long without end caps •Made in the U.S.A.

MIDPIPE CROSSOVER CONVERSION

5046506

NOTE: These mufflers do not come with end caps. Order desired end cap separately. (See 3” Accessories and Replacement Parts below.)

•Turns OEM 10 FLTRX/FLHX 2-into-1 into a 2-1-2 to give back dual exhaust look and sound that riders are looking for •Connects to stock headpipes •Does not include mufflers or end caps; all 10-13 FLHT/FLHR SuperTrapp and Kerker mufflers will fit crossover conversion •Includes heatshields •Made in the U.S.A.

PART # 3MSU‑1750

PART # 1802‑0120

DESCRIPTION 13/4” muffler

SUG. RETAIL $287.95

DESCRIPTION For 10 FLTRX/FLHX

SUG. RETAIL $410.95

5” REPLACEMENT DISCS •Fit V5 2-into-1 system •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 02‑11 V‑ROD VRSCA/B 5046506 5” discs (6-pk.) $33.95 5046512 5” discs (12-pk.) 62.95

ENGINE TRANSMISSION & DRIVELINE

3MSD‑2535

328‑93750

3MSD‑2035 4M3046 4M3046PS

GASKETS & SEALS 308‑3635

LIGHTING

CABLES

BRAKES TANKS & OIL FILTERS

4AM6506

300‑8173

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS

4M3046S

4AM2120

304‑3034

3” ACCESSORIES AND REPLACEMENT PARTS

3AM6506

4M7206

•Made in the U.S.A. PART # 328‑93750 3MSD‑2535 3MSD‑2035 308‑3635 1860‑0249 300‑8173 304‑7203 304‑3034 3AM6506 304‑6512

4M7306

4” ACCESSORIES AND REPLACEMENT PARTS

DESCRIPTION Repl. end cap, fishtail (ea.) Repl. end cap, slash cut (ea.) Repl. end cap, tapered (ea.) Repl. end cap, large turndown/turnout (ea.) Repl. baffle for 2-into-1 and Touring mufflers Repl. core for 13/4” staggered duals Bolt pack kit (3 long bolts/3 short bolts) Repl. internal open end cap (3 bolt) Diffuser disc, 6-pk. Diffuser disc, 12-pk.

SUG. RETAIL $155.95 87.95 76.95 132.95 102.95 121.95 12.95 12.95 26.95 47.95

•Made in the U.S.A. PART # 4M3046PS 4M3046 4M3046S 4AM2120 4AM6506 404‑6512 4M7206 4M7306 400‑8208

DESCRIPTION Open end cap (racing only) (ea.) Aluminum end cap (ea.) Std. end cap (ea.) Exhaust shield (ea.) 4” discs (6-pk.) 4” discs (12-pk.) Std. repl. screws, holds up to 20 discs (6-pk.) Racing screws, holds up to 34 discs (15 minimum) (6-pk.) Repl. core megaphone, 2-1

SUG. RETAIL $28.95 31.95 24.95 25.95 26.95 47.95 18.95 40.95 127.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

418

EXHAUST END CAP

TRAPPCAPS

402‑1000

402‑1020

•The perfect way to cap any 4” external disc silencer •6061 billet aluminum, hand polished to a mirror finish •Run open for the ultimate in top-end power and sound; run closed for improved low-end torque and quieter operation •Sold each •Made in the U.S.A. PART # 402‑1000 402‑1020

DESCRIPTION Star billet Slotted wheel

SUG. RETAIL $155.95 155.95

1812‑0162

1812‑0194 •Polished end cap for SuperTrapp mufflers •PART #s 1812-0150 and 1812-0162 allow you to open up your exhaust for straight-through flow by simply turning a screw •Vortex design creates unique spiraling back pressure, altering sound and performance •Slight power gains when used on modified motors •Made in the U.S.A. •Sold each SUG. PART # 1812‑0162 1812‑0150 1812‑0194

DESCRIPTION For 3” dia. SuperTrapp external disc mufflers For 4” dia. SuperTrapp external disc mufflers Vortex style for 4” dia. SuperTrapp external disc mufflers

RETAIL $45.95 52.95 52.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-0554

EXHAUST FUEL/AIR SYSTEMS 1800-1258

SUPERMEG 2-INTO-1 SYSTEMS

ENGINE

•Increase horsepower with this popular 2-into-1 system •Deep, rumbling sound that’s sure to please •Design features a straight-through rebuildable core so exhaust can flow freely through system for quick acceleration •Triple chrome-plated or black ceramic finish •Integrated full-coverage heat shield •Includes mounting bracket and hardware •Made in the U.S.A.

TRANSMISSION & DRIVELINE GASKETS & SEALS

NOTE: Not recommended for Softail models with Springer-style saddlebags.

1800-1054

PART # DESCRIPTION FOR 12-13 FXST/FLST 1800-1368 Chrome 1800-1369 Black ceramic FOR 07-11 FXST/FLST 1800-0554 Chrome 1800-0555 Black ceramic FOR 90-06 FXST/FLST, 91-05 DYNA GLIDE 1800-0082 Chrome 1800-0562 Black ceramic FOR 12-13 DYNA GLIDE (EXCEPT FLD) 1800-1370 Chrome 1800-1371 Black ceramic FOR 06-11 DYNA GLIDE 1800-0558 Chrome 1800-0559 Black ceramic

SUG. RETAIL $699.95 771.95 699.95 771.95 699.95 771.95 699.95 797.95 699.95 771.95

PART # DESCRIPTION FOR 10-13 FLHT/FLHR/FLTR/FLHX 1800-1257 Chrome 1800-1258 Black ceramic FOR 09 FLHT/FLHR/FLTR/FLHX 1800-1054 Chrome 1800-1055 Black ceramic FOR 07-08 FLHT/FLHR/FLTR/FLHX 1800-0556 Chrome 1800-0557 Black ceramic FOR 85-06 FLT/FLHT/FLHX/FLHR/FLTR 1800-0080 Chrome FOR 07-13 XL 1800-0763 Chrome 1800-0764 Black ceramic

SUG. RETAIL $792.95 852.95 792.95 852.95 792.95 852.95 792.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

699.95 771.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

2-INTO-1 CHROME SLASH-CUT SYSTEMS WITH STRAIGHT-THROUGH CORE •Impressive horsepower increase •Unique three-piece heat shield for full coverage •System for Softail-style frames with wide tires requires offset engine placement •Made in the U.S.A.

DESCRIPTION 230mm system for Softail-style frames w/ wide tires

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Modification of mounting brackets may be required. PART # 12871470

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL $699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

419

SECTION

WINDSHIELDS & FAIRINGS TOURING 12878065

AUDIO & COMMUNICATION

1800‑0581

LUGGAGE 12878082

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

EXHAUST SYSTEMS •Available in 2‑into‑1 or 2‑into‑2 Fishtail crossover design, both with a brightly‑polished chrome finish •K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note •Optional end caps let you change your look without changing pipes; choose from classic Fishtail, Tapered or Turndown that can be mounted in three positions •System includes full heat shield set and all necessary mounting hardware •End caps sold separately •Made in the U.S.A. PART # 1800‑0553 12878065 12878083 12878082 100‑78571 1

DESCRIPTION 2‑into‑1 system for 07‑11 FLST/FXST/FXS 2‑into‑1 system for 90‑06 FLST/FXST 2‑into‑2 system for 97‑06 FLST/FXST 2‑into‑2 system for 86‑96 FLST/FXST Mikuni P.A.T. performance baffle for PART #S 12878082 and 12878065

2‑INTO‑1 SPORTSTER SYSTEMS •Lighter‑than‑ stock construction 1800‑0582 •Deep signature exhaust tone •High‑flow 2” diameter baffle for increased performance •Available with brushed aluminum or carbon fiber canisters •Longer‑lasting “Pillow Pack” packing •Rebuildable core and packing •Polished stainless steel turndown end caps with rolled edge •Made in the U.S.A.

SUG. RETAIL $781.95 904.95 1,450.95 1,450.95

PART # FOR 86‑03 XL 1800‑0581 1800‑0582

143.95

Not recommended for use with fuel‑injected models.

DESCRIPTION Brushed aluminum Carbon fiber

SUG. RETAIL $822.95 822.95

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801‑0521

STOUT SLIP‑ON MUFFLERS

1801‑0521

•Massive 4” non‑tunable chrome or black ceramic bodies •Streamlined, internal tapered, billet aluminum end caps with recessed fasteners are preinstalled •Newly‑designed inlets flow better into OEM headpipe as well as SuperTrapp True Dual Headpipes •Provide a bold, strong power curve from mid‑range on up with a significant horsepower and torque gain over stock mufflers •Classic deep and heavy Kerker rumble is 5 dB over stock •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 10‑13 FLHT/FLHR/FLHX/FLTR (EXCEPT 10 FLHX/FLTRX) 1801‑0521 Chrome 1801‑0589 Black ceramic

SUG. RETAIL

$689.95 709.95

PART # DESCRIPTION SUG. RETAIL FOR 95‑09 FLT/FLHT/FLHR/FLHX/FLTR 1801‑0520 Chrome $689.95 1801‑0588 Black ceramic 709.95

1801‑0589

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

420

31/2” SLIP‑ON MUFFLERS

1801‑0423 w/ optional end cap 1802‑0035

1801‑0015

•K3 baffle core designed for maximum exhaust flow and an attention‑grabbing exhaust note •Mufflers do not include end caps (except PART #1801‑0015, which includes Java Jugs end caps) 12878030 •Optional end caps let you change your look without changing pipes •End caps sold separately •Sold in pairs (unless noted) •Made in the U.S.A. PART # 1801‑0423 1801‑0374 12878020

DESCRIPTION For 10 FLHX/FLTRX (ea.) For 10‑13 FLHT/FLHX/FLHR/FLTR and H‑D FL Trike (except 10 FLHX) For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR

SUG. RETAIL $277.95 421.95 421.95

PART # 1801‑0015 12878010 12878030

DESCRIPTION For 95‑09 FLT/FLHT/FLHX/FLHR/FLTR (include Java Jug end caps) For L85‑94 FLT/FLHT For 97‑03, 05‑07 FLSTS/C

SUG. RETAIL $524.95 421.95 421.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS 100-7857

12878045

MIKUNI P.A.T. CORE SLIP-ON MUFFLERS

TOURING

•Mikuni’s Joe Minton designed these hot slip-on mufflers that provide maximum performance when used with the Mikuni P.A.T. System •Muffler contains a special straightthrough core for the least-restrictive exhaust flow that produces more power and a blood-churning sound •Core is wrapped with Silent Sport™ packing for superior sound and greater durability than ordinary fiberglass •Mufflers do not include end caps; end caps are available separately •Sold in pairs •Made in the U.S.A.

12878035

PART # DESCRIPTION SUG. RETAIL CORE SLIP-ON MUFFLERS 12878045 For 95-13 FLHR, FLTR, FLHT, FLT, FLHX $421.95 12878035 For 97-03 FLSTS, 05-07 FLSTSC 452.95 BAFFLES 100-7857 Mikuni P.A.T. performance baffle 143.95

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

K SERIES SLIP-ON MUFFLERS

TRANSMISSION & DRIVELINE

•13 lb. lighter than stock •Deep signature exhaust tone •High-flow 2” diameter baffle for optimum performance •Expertly-finished brushed aluminum impact extruded canisters •Rebuildable core and packing •Sold in pairs •Made in the U.S.A. PART # 1801-0176

DESCRIPTION For 06-13 VRSCD/VRSCR

GASKETS & SEALS

SUG. RETAIL $513.95

ELECTRICAL

108-7257

108-8022

108-8021

LIGHTING

1802-0117 1802-0014

HANDLEBARS, CONTROLS & MIRRORS CABLES

1802-0017

1802-0016

1802-0015

BRAKES

1802-0118

TANKS & OIL FILTERS

1802-0116

END CAPS FOR KERKER 31/2” MUFFLERS •Fits complete systems and slip-on mufflers •Sold each •Made in the U.S.A. PART # STEEL END CAPS 108-8021 108-8022 108-7257 1802-0117 1802-0014 1802-0118 1802-0116

1802-0037

1802-0018

DASHES & GAUGES

1802-0038

FRAMES, SUSPENSION & FENDERS

1802-0035 1802-0036

DESCRIPTION Fishtail end cap Turnout/Turndown end cap Tapered end cap Tapered end cap, black Slash end cap Slash end cap, black Rolled, black

SUG. RETAIL $99.95 99.95 54.95 76.95 99.95 76.95 76.95

PART # BILLET END CAPS 1802-0015 1802-0016 1802-0017 1802-0018 YAFFE END CAPS 1802-0035 1802-0036 1802-0037 1802-0038

DESCRIPTION

SUG. RETAIL

Fluted end cap Tapered end cap Grooved end cap Java Jug end cap

$99.95 99.95 99.95 99.95

Afterburner, black billet Afterburner, chrome billet Big Poppa, chrome billet Claw, chrome billet

176.95 176.95 121.95 121.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

421

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1802-0252

LUGGAGE 1802-0121

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

2 INTO 2 DUAL HEADER SYSTEMS •Reduces heat transmission to the rider and passenger by routing the exhaust under the frame instead of under the seat •Lighter system that offers more flow and makes more top-end power than the factory system •Features 13/4” 16-gauge mandrel bent, interconnected headers and 220° full-coverage heat shields •Front pipe crosses over to the left side and is 1802-0121 securely mounted to the transmission oil pan •Crossover pipe is formed from the 17/8 tubing for increased w/ 1801-0414 mufflers ground clearance and no cross-sectional area loss •Hidden inter-connect for maximum top-end horsepower, improved low-end torque and sound dampening •Headers systems are available in a high-gloss chrome finish and full-coverage heat shields are finished in black Jet-Hot® high-performance coating with chrome-plated headers •PART #s 1802-0121 and 1802-0252 include two 18mm O2 sensor ports, plugs and all mounting hardware •PART #s 1802-0122 and 1802-0253 include two 18mm sensor ports with plugs and two 12mm sensor ports with plugs •Header systems accept any 95-13 OEM-style dresser mufflers (sold separately) •O2 sensor ports and plugs, gaskets and all mounting hardware included •Use any Khrome Werks™ or other bagger muffler set •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLHT/FLHX/FLTR/FLHR 1802-0122 Chrome headers 1802-0253 Headers w/ black shields

SUG. RETAIL $525.95 624.95

PART # DESCRIPTION FOR 95-08 FLHT/FLHX/FLTR/FLHR 1802-0121 Chrome headers 1802-0252 Headers w/ black shields

SUG. RETAIL $525.95 624.95

BRAKES TANKS & OIL FILTERS 1801-0628

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

422

1801-0630

4” HP-PLUS® TOURING AND PERFORMANCE SLANT DOWN MUFFLERS •Constructed from one-piece 16-gauge steel tubing muffler shell with interchangeable baffle inserts •Deep, mellow exhaust tone with horsepower and torque gains over stock mufflers •Steel baffle core is first machine wrapped with stainless steel wool, followed by a high-temperature fiberglass blanket for acoustic longevity assurance •Performance version is designed to enhance top-end power while retaining good low-end torque •Touring version trades minimal top-end output for mile after mile of rumbling exhaust tone •Uses factory mounting hardware and clamps •Available in highly polished duplex nickel chrome or a high-temperature, Jet-Hot® black ceramic coating •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLHT/FLHR/FLTR/FLHX 1801-0628 Chrome (touring) 1801-0629 Chrome (performance) 1801-0630 Jet-Hot® black (performance)

SUG. RETAIL $549.95 549.95 649.95

PART # DESCRIPTION REPLACEMENT BAFFLE INSERTS (EA.) 1860-0620 Touring insert 1860-0621 Performance insert

SUG. RETAIL $92.95 92.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS 1801-0415

TOURING AUDIO & COMMUNICATION 1801-0414

LUGGAGE SEATS & SISSY BARS 1801-0416

EXHAUST

3.50” HP-PLUS® TOURING MUFFLERS •Chrome mufflers increase horsepower and torque with a distinctive deep, throaty, but quieter sound •All new HP-Plus® patented dual-chamber absorptive baffles – large, short front absorptive chamber mutes deceleration popping •Long, rear absorptive chamber features HP-Plus resonator – both chambers are wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under an ultra-high-temperature basalt wool •Stainless steel packing ensures long life for the high-frequency absorptive basalt wool •Dual-layer packing covers the complete length of the baffle to minimize body discoloration and to absorb the annoying higher frequencies •Low-speed torque is improved over our 3.00” mufflers; overall decibel level is reduced while still retaining high-quality, deep Khrome Werks signature sound •Fit models equipped with OEM crossover or aftermarket “True Duals” systems •Utilize factory mounting hardware and clamps •Sold in pairs •Made in the U.S.A. •U.S. patent 5,173,576 NOTE: ECM unit may need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly. NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards.

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS 1801-0414 Slash down $459.95 1801-0415 Slash up 459.95 1801-0416 Tapered 459.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1801-0418

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0419

CABLES

BRAKES 1801-0438

TANKS & OIL FILTERS

1801-0598

HP-PLUS® TOURING LITE MUFFLERS

•3” and 3.5” diameter Touring Lite line of mufflers has been completely redesigned, retaining the great performance and quality sound •New features include 16-gauge one-piece shells, upgraded baffle design, bolt and nut baffle installation, and upgraded acoustical wrap materials •One-piece chrome or Jet-Hot® black coated shell eliminates possibility of leaks and transition screws loosening or stripping •Redesigned baffle is machine-wrapped with a laminated muffler packing consisting of a thin layer of stainless steel under high- temperature basalt wool installed with 1/4”-20 bolts and nuts – an improvement over the #10 screws •Stainless steel packing ensures long life for high-frequency absorptive basalt wool •Dual-layer packing covers the complete length of the baffle, minimizing muffler body discoloration and absorbing the annoying higher frequencies •Fit models equipped with OEM crossover or aftermarket “True Duals” systems •Utilize factory mounting hardware and clamps •Sold in pairs •Made in the U.S.A. FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLTRX/FLHX) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION CHROME 3” MUFFLERS CHROME 3.5” MUFFLERS 1801-0417 Slash down $349.95 1801-0438 Slash up 1801-0418 Slash down w/ ribs 379.95 1801-0439 Slash down 1801-0419 Tapered 349.95

SUG. RETAIL $399.95 399.95

PART # DESCRIPTION JET-HOT® BLACK 3.5” MUFFLER 1801-0598 Slash down

SUG. RETAIL $499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

423

SECTION

WINDSHIELDS & FAIRINGS TOURING

1801-0524

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1801-0147

1801-0145

EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0146

1801-0153

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

424

1801-0624

3” HP-PLUS® SLIP-ON MUFFLERS •Patented steel construction baffle now features more high-temperature fiberglass packing, provides significant gains in horsepower and torque and exhibits a distinctive, throaty sound •Use all factory mounting hardware •OEM heat shields may be retained •Sold in pairs •Made in the U.S.A. •U.S. patent 5,173,576

1801-0621

NOTE: ECM units on fuel-injected models need to be recalibrated if used with free-flowing air cleaners and/or modified engines. Muffler shells may discolor if ECM units are not calibrated correctly. NOTE: These mufflers are designed for use on closed-course competition motorcycles only and do not conform to U.S. EPA noise emission standards. CHROME PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST/FLST MODELS (EXCEPT FXS/ FXSTD/FLS/FLSTF/FLSTN/FLSTSB/FLSTSC) 1801-0148 Slash cut $294.95 1801-0156 Tapered 294.95 1801-0524 Slant down 309.99 FOR 07-13 FXSTD/FLSTF 1801-0150 Slash cut 294.95 1801-0158 Tapered 294.95 FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0152 Slash cut 294.95 1801-0620 Slash down 294.95 1801-0160 Tapered 294.95 BLACK PART # DESCRIPTION FOR 07-13 FLSTN, 08-11 FLSTSB 1801-0621 Slash down FOR 08-13 FXDF, 10-13 FXDWG 1801-0627 Slash down

SUG. RETAIL $369.95 369.95

PART # DESCRIPTION FOR 05-06 FLSTN 1801-0151 Slash cut 1801-0160 Tapered FOR 00-06 FXST/C/S, FLST/C (WITH CROSSOVER CONNECTION) 1801-0147 Slash cut FOR 00-06 FLSTF/FXSTD (WITH CROSSOVER CONNECTION) 1801-0149 Slash cut FOR 08-13 FXDF, 10-13 FXDWG 1801-0291 Slash down

SUG. RETAIL $269.95 294.95

309.95

299.95 294.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD (EXCEPT 10-13 FXDWG, FXDF, FLD) 1801-06261 Slash down $359.95 FOR 95-05 FXD 1801-06241 Slash cut 369.95

PART # DESCRIPTION SUG. RETAIL FOR 06-13 FXD (EXCEPT 10-13 FXDWG, FXDF, FLD) 1801-0622 Slash cut $294.95 1801-0623 Tapered 294.95 FOR 95-05 FXD 1 1801-0145 Slash cut 274.95 1801-01531 Tapered 274.95 FOR 04-13 XL MODELS (WITH CROSSOVER CONNECTION) 1801-0146 Slash down 309.95 1801-0154 Tapered 309.95 1

Will fit 91-94 models if mounting bracket DS-209936 is used.

PART # DESCRIPTION FOR 04-13 XL MODELS (WITH CROSSOVER CONNECTION) 1801-0625 Slash down 1

SUG. RETAIL

$379.95

Will fit 91-94 models if mounting bracket DS-209936 is used.

SOUND REDUCTION KIT •Easy, bolt-in sound reduction for 3” HP-Plus® mufflers •Takes off 4dB at idle and improves low-end torque – minimal loss of top-end horsepower •The machined discs with tapered bosses fit into each end of the patented resonator near the exit end of the mufflers and are retained by the supplied bolts and nuts •This kit is designed to use with three-ball style resonators that are 6.50” long •Will also fit most other mufflers (four-ball style resonators) if 1/4”-20 x 11.00” threaded rods are substituted for the supplied bolts •Installation requires removal of the mufflers •Kit includes machined discs and two 7.50” 1/4”-20 bolts and two PART # DESCRIPTION prevailing torque nuts 1861-0806 Sound reduction kit •Made in the U.S.A.

SUG. RETAIL $19.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1354

FUEL/AIR SYSTEMS ENGINE

1800-1355

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-1349

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1350

CABLES

BRAKES

CALIBER TRUE DUAL CROSSOVER AND CROSSUNDER EXHAUST SYSTEMS •High-performance True Dual systems with Samson’s Quad Chrome or Sinister black ceramic finish •Offers performance boosts in horsepower and torque while improving fuel efficiency •True Dual crossover or crossunder, four-step headers run from 13/4” at the port, steps to 17/8”, then 2” and finish in 4” muffler bodies 1800-1351 •Headers are covered by 21/4” full-coverage chrome heat shields that flow smoothly into the muffler •Mufflers are finished with a chrome billet end cap and feature removable Varitech baffles; PART #1800-1350 features Decibel Killer baffles that deliver a rich tone without all the “noise” •Optional high-performance baffles available separately for increased flow; for use with 4” mufflers only •Dual O2 sensor ports accept OEM and aftermarket closed-loop fuel management systems •Mounting hardware included •Made in the U.S.A. NOTE: L85-06 applications may require the separate purchase of O2 sensor port plugs; see page 476. PART # DESCRIPTION FOR 10-13 FLHT, FLHX, FLTR, FLHR 1800-1354 Crossover headers w/ chrome heat shields and 29” chrome mufflers 1800-1355 Crossover headers w/ black heat shields and 29” black mufflers 1800-1349 Crossunder headers w/ chrome heat shields and 30” chrome mufflers

SUG. RETAIL

$999.95 999.95 899.95

PART # DESCRIPTION FOR 10-13 FLHT, FLHX, FLTR, FLHR (CONT) 1800-13501 Crossunder headers w/ chrome heat shields and 30” chrome mufflers 1800-1351 Crossunder headers w/ chrome heat shields and 35” chrome mufflers 1861-0552 Optional high-performance baffle; 21/2” i.d. (ea.) 1

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SUG. RETAIL

$899.95 899.95 138.95

Features Decibel Killer baffles.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

425

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-1338

1800-1342

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1340

ELECTRICAL

LIGHTING 1800-1518

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1800-1344

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

426

CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS

1800-1346

•The third generation of the horsepower-inducing Powerflow series is the most powerful yet •Powerflow III 4” 2-into-1 collector with 13/4” head pipes •Power Chamber condenses and intensifies exhaust flow to produce 20% or more horsepower and torque •Full-coverage removable heat shields with Samson’s Quad Chrome or Sinister black ceramic coating •O2 sensor ports accept OEM and aftermarket sensors •Burly 4” muffler features removable baffle and chrome end cap •Made in the U.S.A. PART # CHROME 1800-1434 1800-1338 1800-1342 1800-1340

DESCRIPTION For For For For

12-13 86-11 10-13 95-08

FXS, FLS, FLST FXS, FXST, FLST FLHT, FLHX, FLHR FLHT, FLHX, FLTR, FLHR

SUG. RETAIL $599.95 599.95 599.95 599.95

PART # CHROME (CONT) 1800-1436 1800-1518 1800-1344 1800-1346

DESCRIPTION For For For For

12-13 12-13 06-11 04-13

FXDB/FXDC/FXDWG/FXDF FLD FXD XL

SUG. RETAIL $599.95 599.95 599.95 599.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION CALIBER POWERFLOW III 2-INTO-1 EXHAUST SYSTEMS (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1339

SEATS & SISSY BARS

1800-1341

EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-1343 1800-1519

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING

1800-1345 PART # BLACK 1800-1435 1800-1339 1800-1343 1800-1341

DESCRIPTION For For For For

12-13 86-11 10-13 95-08

1800-1347 SUG. RETAIL

FXS, FLS, FLST FXS, FXST, FLST FLHT, FLHX, FLHR FLHT, FLHX, FLTR, FLHR

$599.95 599.95 599.95 599.95

PART # BLACK (CONT) 1800-1437 1800-1519 1800-1345 1800-1347

DESCRIPTION For For For For

12-13 12-13 06-11 04-13

SUG. RETAIL

FXDB/FXDC/FXDWG/FXDF FLD FXD XL

$599.95 599.95 599.95 599.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS 1800-0693

DASHES & GAUGES

1800-0694

FRAMES, SUSPENSION & FENDERS

TRUE DUALS FOR SOFTAIL •”Quad” chrome finish offers a lustrous, long-lasting shine •Offers increased horsepower and torque while improving gas mileage •21/4”, 220° full-coverage heat shields flow smoothly into non-baffled Longtail mufflers •Completely assembled and ready to install •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FXS, FXST, FLST MODELS 1800-0693 True Duals w/ 28” Longtail mufflers 1800-0694 True Duals w/ 39” Cholo Longtail mufflers 1800-1194 True Duals w/ 36” Mini Cholo Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95

FOOTRESTS & LICENSE PLATE FRAMES

1800-1194

PART # DESCRIPTION FOR 07-11 FXS, FXST, FLST MODELS (CONT) 1800-1197 True Duals w/ 33” Longtail mufflers FOR 95-06 FXST, FLST 1800-1198 True Duals w/ 33” Longtail mufflers

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

427

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1802-0221

1802-0220 Left

1800-1191

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1802-0203

1802-0220 Right

1801-0367

ENGINE TRANSMISSION & DRIVELINE

1801-0370

1801-0599

1801-0600

TRUE DUAL CROSSOVER HEADERS AND MUFFLERS FOR SOFTAILS GASKETS & SEALS ELECTRICAL

•13/4” True Dual crossover headers with 21/4” full-coverage heat shields •Finished with Samson’s exclusive Quad Chrome or Sinister black ceramic coating •Clean “seamless” transition between headers and mufflers •Muffler brackets and shift rod included •Headers and mufflers sold separately; mufflers are available with or without integrated baffles •Made in the U.S.A. NOTE: Header pipes and mufflers listed will not interchange with OEM components.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # DESCRIPTION SUG. RETAIL TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 12-13 FXS/FLS/FLST 1802-0220 Chrome $599.95 1802-0221 Black 599.95 TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 07-11 FXS/FXST/FLST 1800-1191 Chrome 599.95 1802-0203 Black 599.95 TRUE DUAL CROSSOVER HEADER PIPES ONLY FOR 95-06 FXST/FLST 1800-1192 Chrome 599.95 21/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY 1801-0367 36” Longtail mufflers w/ baffles 399.95

1801-0371

PART # DESCRIPTION SUG. RETAIL 21/4” CHROME MUFFLERS FOR TRUE DUAL CROSSOVER HEADER SYSTEMS ONLY (CONT) 1801-0368 36” Mini Cholo Longtail mufflers w/o baffles $399.95 1801-0369 33” Mini Cholo Longtail mufflers w/ baffles 399.95 1801-0370 33” Longtail mufflers w/o baffles (4” dia.) 399.95 1801-0371 28” rolled-edge straight-cut mufflers w/ baffles 399.95 1801-0600 30” round muffler w/ removable baffles and billet end caps (4” dia.) 599.95 21/4” BLACK MUFFLERS FOR FXST, FLST TRUE DUAL CROSSOVER SYSTEMS ONLY 1801-0599 30” round muffler w/ removable baffles and billet end caps (4” dia.) 599.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

428

1800-0188 Right w/ fishtail mufflers 1800-0188 Left w/ fishtail mufflers DS-200139

DUAL EXHAUST CROSSOVER SYSTEMS •”True Dual” header pipes are chrome plated and heli-arc welded for strength •Improved mounting for more ground clearance •Header pipes include 2” full-coverage heat shields, mounting brackets and clamps •Header systems and mufflers sold separately •Made in the U.S.A. NOTE: On models with saddlebags, always check clearance before running engine.

DS-200133

NOTE: Header pipes and mufflers listed will not interchange with OEM components. PART # DESCRIPTION CROSSOVER HEADER PIPES ONLY 1800-0529 For 07-11 FXST and FLST models 1800-0188 For 95-06 FXST and FLST models

SUG. RETAIL $599.95 599.95

PART # DESCRIPTION SUG. RETAIL 3” CHROME SILVER BULLET™ MUFFLERS FOR CROSSOVER HEADER PIPES ONLY DS-200139 26” Slash-cut w/ baffles $349.95 DS-200133 27” Fishtail w/ baffles 499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1449

1800-1448

LUGGAGE SEATS & SISSY BARS EXHAUST 1800-1451

1800-1450

FUEL/AIR SYSTEMS ENGINE

1800-1452

TRANSMISSION & DRIVELINE GASKETS & SEALS

1800-1455

ELECTRICAL

LIGHTING 1800-1356

1800-1193

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1800-1357

TRUE DUALS FOR FXS/FXST/FLS/FLST

Longtail Fishtail •Features a full-diameter rear pipe for optimal flow and performance •Headpipes are covered with 220° heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results •21/4” muffler bodies with integrated, non-removable, fuel-injection-friendly baffles •Great traditional fishtail looks from the people who know fishtails or the sleek, unique longtails which are 2” longer on the bottom of the tail •Mounting brackets and hardware included •Made in the U.S.A. NOTE: Muffler bodies are measured from the bottom of the fishtail to the beginning of the muffler body, excluding the inlet. PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST MODELS 1800-1448 True Duals w/ 23.5” Fishtail mufflers 1800-1449 True Duals w/ 28.5” Fishtail mufflers 1800-1450 True Duals w/ 23.5” Longtail mufflers 1800-1451 True Duals w/ 28.5” Longtail mufflers 1800-1452 True Duals w/ 39” Cholo Longtail mufflers 1800-1453 True Duals w/ 36” Cholo Longtail mufflers 1800-1455 True Duals w/ 33” Longtail mufflers FOR 07-11 FLST/FXS/FXST MODELS 1800-0512 True Duals w/ 23.5” Fishtail mufflers 1800-0513 True Duals w/ 28.5” Fishtail mufflers 1800-0514 True Duals w/ 23.5” Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95 899.95

PART # DESCRIPTION SUG. RETAIL FOR 07-11 FLST/FXS/FXST MODELS (CONT) 1800-0515 True Duals w/ 28.5” Longtail mufflers $899.95 1800-0505 True Duals w/ 39” Cholo Longtail mufflers 899.95 1800-1193 True Duals w/ 36” Mini Cholo Longtail mufflers 899.95 1800-1195 True Duals w/ 28” rolled-edge, straight-cut mufflers 899.95 1800-1199 True Duals w/ 33” Longtail mufflers 899.95 1 1800-1356 True Duals w/ 33” Longtail mufflers (40° upsweep) 899.95 1 1800-1357 True Duals w/ 33” Longtail mufflers (40° upsweep) (non-baffled) 899.95 1

Shift rod included. TRUE DUALS FOR FXS/FXST/FLS/FLST continued on next page.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

429

SECTION

6 TRUE DUALS FOR FXS/FXST/FLS/FLST (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-0189 Right 1800-0189 Left

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1800-0190 Right

1800-0190 Left

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-0191 Right 1800-0191 Left

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

1800-0192 Right

1800-0192 Left

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1800-1196 1800-0394 1800-1200

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

430

PART # DESCRIPTION FOR 95-06 FLST/FXST MODELS 1800-0189 True Duals w/ 23.5” 1800-0190 True Duals w/ 28.5” 1800-0191 True Duals w/ 23.5” 1800-0192 True Duals w/ 28.5”

SUG. RETAIL Fishtail mufflers Fishtail mufflers Longtail mufflers Longtail mufflers

$899.95 899.95 899.95 899.95

PART # DESCRIPTION FOR 95-06 FLST/FXST MODELS (CONT) 1800-0394 True Duals w/ 39” Cholo Longtail mufflers 1800-1196 True Duals w/ 28” rolled-edge, straight-cut mufflers 1800-1200 True Dual w/ 33” Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1800-1454

SEATS & SISSY BARS

1800-1456

TRUE DUAL CROSSOVER EXHAUST SYSTEMS W/ REMOVABLE BAFFLES

EXHAUST

•High-performance True Dual system delivers better performance and reduces heat from the rear cylinder by using a free-flowing rear headpipe to keep the engine running cooler •Available with Quad Chrome finish or Sinister black ceramic coating •13/4” headers with 21/4” full-coverage heat shields •Burly 4” mufflers with removable 2” baffles and chrome end caps •Optional high-performance baffles available separately •Includes all mounting hardware •Made in the U.S.A. PART # FOR 12-13 FXS/FLS/FLST 1800-1456 1800-1454 FOR 95-11 FXS/FXST/FLST 1800-10661 1

DESCRIPTION

FUEL/AIR SYSTEMS ENGINE

SUG. RETAIL

Chrome Black

$899.95 899.95

Black

899.95

1800-1066 PART # DESCRIPTION OPTIONAL BAFFLES 1861-0552 21/2” i.d. (ea.)

TRANSMISSION & DRIVELINE

SUG. RETAIL $138.95

1861-0552

95-06 models will require O2 sensor port plugs; sold separately.

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1348 1800-1352

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-1353 Right side

TRUE DUAL CROSSUNDER EXHAUST SYSTEMS FOR DRESSERS •True Dual 13/4” crossunder headers with 21/4” full-coverage heat shields •Designed to produce 20% or more horsepower and torque with a full, rich sound •Quad Chrome finish delivers optimal adhesion and corrosion protection •Backlash mufflers have removable baffles; Longtails have non-removable baffles •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1348 True Duals w/ 33” Longtail mufflers

SUG. RETAIL

$899.95

PART # DESCRIPTION SUG. RETAIL FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1352 True Duals w/ 28” Backlash mufflers $799.95

FOOTRESTS & LICENSE PLATE FRAMES 1800-1353 Left side

PART # DESCRIPTION SUG. RETAIL FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1353 True Duals w/ 32” Backlash mufflers $799.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

431

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800-1541

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1542

1800-1540

TRUE DUAL CROSSOVER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS •True Dual crossover systems with 13/4” headpipes and 21/4” full-coverage heat shields •Show-quality Quad Chrome finish •21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips •Designed to deliver 20% or more horsepower and torque gains •Systems include O2 sensor ports that accept OEM or aftermarket O2 sensors •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1540 W/ 33” mufflers 1800-1541 W/ 36” mufflers

SUG. RETAIL $899.95 899.95

1800-1543

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1542 W/ 39” mufflers 1800-1543 W/ 42” mufflers

SUG. RETAIL $899.95 899.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-1537

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

432

1800-1538

1800-1536

TRUE DUAL CROSSUNDER SYSTEMS WITH REMOVABLE LONGTAIL TIPS FOR DRESSERS •True Dual crossunder systems with 13/4” headpipes and 21/4” full-coverage heat shields •Show-quality Quad Chrome finish •21/4” dia. mufflers feature 13/4” x 10” removable baffles and removable Longtail tips •Designed to deliver 20% or more horsepower and torque gains •Systems include O2 sensor ports that accept OEM or aftermarket O2 sensors •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1536 W/ 33” mufflers 1800-1537 W/ 36” mufflers

SUG. RETAIL $899.95 899.95

1800-1539

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1538 W/ 39” mufflers 1800-1539 W/ 42” mufflers

SUG. RETAIL $899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-1262

LUGGAGE 1800-1260

SEATS & SISSY BARS EXHAUST 1800-1261

FUEL/AIR SYSTEMS 1800-1259

ENGINE TRANSMISSION & DRIVELINE 1800-1532

GASKETS & SEALS

1800-1266

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1534

1800-1533

CABLES

BRAKES TANKS & OIL FILTERS

1800-1535

TRUE DUAL CROSSOVER SYSTEMS FOR DRESSERS •True Dual 13/4” crossover headers with full-coverage heat shields •Designed to produce up to 20% more horsepower, huge torque and a powerful sound •Show-quality Quad Chrome finish delivers optimal adhesion and corrosion protection •Mufflers are available with or without integrated, non-removable baffles •Made in the U.S.A. SUG. PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-12601, 2 True Duals w/ 33” x 17/8” Longtail slip-ons w/o baffles 1800-12621 True Duals w/ 33” x 21/4” Longtail mufflers w/ baffles (dia.) 1800-12671 True Duals w/ 33” x 21/4” Longtail slip-ons w/o baffles 1 1800-1259 True Duals w/ 33” x 4” Longtail mufflers w/ baffles 1800-12611, 2 True Duals w/ 36” x 17/8” Straight Longtail slip-ons w/o baffles 1800-12651 True Duals w/ 36” x 21/4” Mini Cholo Longtail slip-ons w/o baffles 1800-12661 True Duals w/ 36” x 21/4” Mini Cholo Longtail mufflers w/ baffles

RETAIL $899.95 899.95 899.95 899.95 899.95 899.95

1800-0393

PART # DESCRIPTION FOR 07-08 FLHT, FLTR, FLHR, FLHX 1800-1532 True Duals w/ 33” x 13/4” Longtail mufflers w/ baffles 1800-1533 True Duals w/ 36” x 13/4” Longtail mufflers w/ baffles 1800-1534 True Duals w/ 39” x 13/4” Longtail mufflers w/ baffles 1800-1535 True Duals w/ 42” x 13/4” Longtail mufflers w/ baffles FOR 95-06 FLHT, FLTR, FLHR, FLHX 1800-1188 True Duals w/ 33” x 4” Longtail mufflers w/ baffles 1800-0393 True Duals w/ 39” x 21/4”Cholo Longtails mufflers w/ baffles 1 2

899.95

DASHES & GAUGES

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95

FLHX and FLTRX models require custom spacing for left passenger footpeg. Optional baffle: PART #DS-202154.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

433

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800-1430 1800-1423 1800-1426

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1425

1800-1457

1800-1464

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1800-1433

1800-1037 1800-0691

LEGEND SERIES EXHAUST SYSTEMS

•Legendary style and function that could only come from Samson •Boost horsepower and torque by up to 20% while also improving fuel efficiency •Stepped headpipes run from 13/4” to 21/4” improving the exhaust flow •Available with either show-quality Quad Chrome finish or Sinister hightemp black ceramic coating; Sinister black retains heat inside the pipe to maximize power while the outer surface remains cooler than chrome pipes •21/2” full coverage heat shields •Removable baffles ensure tuning requirements of today’s fuel-injected motors while emitting a deep, guttural tone •O2 sensor ports accept OEM and aftermarket sensors •Made in the U.S.A.

1800-1034

NOTE: 86-06 FXST, FLST and 04-06 XL applications will require the separate purchase of O2 sensor port plugs; see page 476.

1800-0814

FOR 12-13 FXS/FLS/FLST MODELS

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

434

SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-1423 Pomonas $699.95 1800-1424 Street Sweepers 699.95 1800-1426 Hellraisers 699.95 1800-1428 Sidewinders 699.95 1800-1430 Slashers 699.95 1800-1432 Rip Saws 699.95 FOR 86-11 FXS, FXST, FLST MODELS SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-0683 Cannons $699.95 1800-0684 Boloney Cut 699.95 1800-0685 Pomona Pipes 699.95 1800-0686 Street Sweepers 699.95 1800-0687 Slashers 699.95 1800-0688 Rip Saws 699.95

PART # DESCRIPTION QUAD CHROME (CONT) 1800-1457 Cannons 1800-1459 Shortys 1800-1461 Longhorns 1800-1462 Renegades 1800-1464 Boloney Cut

PART # DESCRIPTION QUAD CHROME (CONT) 1800-0689 Sidewinders 1800-0691 Longhorns 1800-0692 Renegades 1800-0818 Shortys 1800-1177 Hell Raisers

SUG. RETAIL $699.95 535.00 749.95 749.95 699.95

SUG. RETAIL $699.95 749.95 749.95 499.95 699.95

FOR 12-13 FLD MODELS SUG. RETAIL

PART # DESCRIPTION QUAD CHROME 1800-1520 Cannons $699.95 1800-1522 Shortys 499.95 1800-1524 Boloney Cut 699.95 1800-1526 Street Sweepers 699.95 1800-1528 Slashers 699.95 1800-1530 Rip Saws 699.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1521 Cannons $699.95 1800-1523 Shortys 499.95 1800-1525 Boloney Cut 699.95 1800-1527 Street Sweepers 699.95 1800-1529 Slashers 699.95 1800-1531 Rip Saws 699.95

SUG. PART # DESCRIPTION RETAIL SINISTER BLACK 1800-1425 Street Sweepers $699.95 1800-1427 Hellraisers 699.95 1800-1429 Sidewinders 699.95 1800-1431 Slashers 699.95 1800-1433 Rip Saws 699.95

SUG. PART # DESCRIPTION RETAIL SINISTER BLACK 1800-1032 Cannons $699.95 1800-1035 Boloney Cut 699.95 1800-1036 Pomona Pipes 699.95 1800-0815 Street Sweepers 699.95 1800-0816 Slashers 699.95

PART # DESCRIPTION SINISTER BLACK (CONT) 1800-1458 Cannons 1800-1460 Shortys 1800-1463 Renegades 1800-1465 Boloney Cut

PART # DESCRIPTION SINISTER BLACK (CONT) 1800-0817 Rip Saws 1800-1037 Sidewinders 1800-1034 Renegades 1800-0814 Shortys 1800-1178 Hell Raisers

SUG. RETAIL $699.95 535.00 749.95 699.95

SUG. RETAIL $699.95 699.95 749.95 499.95 699.95

FOR 12-13 FXDB/FXDC/FXDWG/FXDF MODELS SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL QUAD CHROME SINISTER BLACK 1800-1438 Cannons $699.95 1800-1439 Cannons $699.95 1800-1442 Street Sweepers 699.95 1800-1440 Shortys 499.95 1800-1444 Hellraisers 699.95 1800-1441 Boloney Cut 699.95 1800-1446 Slashers 699.95 1800-1443 Street Sweepers 699.95 1800-1447 Rip Saws 699.95 1800-1445 Hellraisers 699.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

LEGEND SERIES EXHAUST SYSTEMS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE 1800-0682 1800-0677

SEATS & SISSY BARS

1800-0681

EXHAUST FUEL/AIR SYSTEMS 1800-1180

1800-1029

ENGINE

1800-1026

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1800-1552

1800-1544

LIGHTING

1800-1548

HANDLEBARS, CONTROLS & MIRRORS CABLES 1800-1331

1800-1547

BRAKES

1800-1551 FOR 06-11 FXD, 06-08 FXDWG WITH FORWARD OR MID CONTROLS SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL QUAD CHROME SINISTER BLACK 1800-0677 Cannons $699.95 1800-1025 Cannon $699.95 1800-0680 Street Sweepers 699.95 1800-1027 Boloney Cut 699.95 1800-0681 Slashers 699.95 1800-1029 Street Sweepers 699.95 1800-0682 Rip Saws 699.95 1800-1031 Rip Saws 699.95 1800-1179 Hell Raisers 699.95 1800-1026 Shortys 499.95 1800-1180 Hell Raisers 699.95

FOR 10-13 FLHT, FLHX, FLHR, FLTR SUG. PART # DESCRIPTION RETAIL QUAD CHROME 1800-1263 Cannons $699.95 1800-1544 Boloney Cut 699.95 1800-1546 Street Sweepers 699.95 1800-1548 Hell Raisers 699.95 1800-1550 Slashers 699.95 1800-1552 Rip Saws 699.95

FOR 09 FLHT, FLHX, FLTR, FLHR

FOR ALL 04-13 XL MODELS

PART # QUAD CHROME 1800-1138

DESCRIPTION Cannons

SUG. RETAIL $699.95

FOR 95-08 FLHT, FLHX, FLTR, FLHR PART # QUAD CHROME 1800-1189 SINISTER BLACK 1800-1190

DESCRIPTION

SUG. RETAIL

Cannons

$699.95

Cannons

699.95

SUG. RETAIL

PART # DESCRIPTION QUAD CHROME 1800-1330 Boloney Cut $599.95 1800-1331 Pomona Pipes 599.95 1800-1332 Street Sweepers 599.95 1800-1333 Hell Raisers 599.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1264 Cannons $699.95 1800-1545 Boloney Cut 699.95 1800-1547 Street Sweepers 699.95 1800-1549 Hell Raisers 699.95 1800-1551 Slashers 699.95 1800-1553 Rip Saws 699.95

SUG. RETAIL

PART # DESCRIPTION SINISTER BLACK 1800-1334 Boloney Cut $599.95 1800-1335 Pomona Pipes 599.95 1800-1336 Street Sweepers 599.95 1800-1337 Hell Raisers 599.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

435

SECTION

WINDSHIELDS & FAIRINGS 1802-0128

TOURING AUDIO & COMMUNICATION

1802-0127

LUGGAGE

1802-0202

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1802-0104 1800-0187

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-0530

LIGHTING DS-202004

DS-202013

DS-202160

DS-202163

DS-202162

DS-202208

DS-202248

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

TRUE DUAL CROSSOVER AND CROSSUNDER HEADER PIPES •High-performance “True Dual” header systems with Quad Chrome finish or Sinister black ceramic coating DS-202164 •Allows exhaust gases to flow more efficiently, reduces heat on the right side and improves airflow cooling the rear cylinder •09-13 systems feature 21/4” full-coverage, 220° heat shields on both pipes; L85-08 systems feature 2” full-coverage heat shields •Heli-arc welded for strength •All required mounting brackets and clamps supplied •Headers will accept Silver Bullet™ mufflers or any 95-13 OEM-style muffler •Mufflers must be purchased separately •Made in the U.S.A.

DS-202167

DS-202179

DS-202154

TRUE DUAL HEADER PIPES ONLY PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1802-0127 Crossover, chrome 1802-0128 Crossover, black 1802-0202 Crossunder, chrome FOR 09 FLHT, FLTR, FLHR, FLHX 1802-0104 Crossover, chrome

SUG. RETAIL $499.95 499.95 499.95

PART # DESCRIPTION FOR 07-08 FLHT, FLTR, FLHR, FLHX 1800-05301 Crossover, chrome FOR L85-06 FLT, FLHT, FLHX, FLHR, FLTR 1 1800-0187 Crossover, chrome 1

499.95

SUG. RETAIL $499.95 499.95

2” heat shields.

3” SILVER BULLET™ MUFFLERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

436

PART # DS-202004 DS-202013 DS-202160 DS-202162 DS-202163 DS-202208

DESCRIPTION 29” Slasher mufflers 29” Slant-cut mufflers 33” Fishtail mufflers 30” Tapered mufflers 30” Turnout mufflers 30” Turndown mufflers

SUG. RETAIL $499.95 499.95 529.95 529.95 529.95 529.95

PART # DS-202248 DS-202164 DS-202167 DS-202179 DS-202154

DESCRIPTION SUG. RETAIL 29” Megaphone mufflers $499.95 29” Slash-cut mufflers 529.95 7 33” Straight-pipe fishtails (1 /8”) (no baffles) 349.95 30” Slip-on drag pipes (17/8”) (use baffle DS-202154) 299.95 11/2” x 10” baffle for 17/8” pipe (ea.) 39.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS DS-202301

DS-202273

DS-202308

TOURING AUDIO & COMMUNICATION

DS-202301

LUGGAGE

ROLLED THUNDER™ MUFFLERS •Rolled edge mufflers give a refined, finished appearance to your Dresser •Power Chamber design with free-flowing, nonremovable baffles •Overall length is 28” •Made in the U.S.A.; sold in pairs

PART # DESCRIPTION FOR ALL 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE DS-202301 Oval DS-202273 Oval slant-cut DS-202308 Straight-cut

SUG. RETAIL $499.95 499.95 499.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

DS-202160 DS-202162 1801-0103

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

DS-202208

DS-202248

DS-202163

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES DS-202164

DS-202167

1801-0468

TANKS & OIL FILTERS 3” SILVER BULLET™ MUFFLERS FOR DRESSERS

DASHES & GAUGES

•3” diameter one-piece mufflers feature Power Chamber design with free-flowing, nonremovable baffles with PowerBar technology and high-quality chrome plating •Bolt to the stock locations with supplied hardware 1801-0466 •Sold in pairs •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS 1801-0467

DS-202179 DS-202154

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE 1801-0103 32” Longtail mufflers DS-202160 33” Fishtail mufflers DS-202162 30” Tapered mufflers DS-202163 30” Turnout mufflers DS-202208 30” Turndown mufflers DS-202248 29” Megaphone mufflers DS-202164 29” Slash-cut mufflers

SUG. RETAIL $599.95 529.95 529.95 529.95 529.95 499.95 529.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE (CONT) 1801-0468 33” x 21/4”Longtail slip-ons (no baffles) $399.95 DS-202167 33” x 17/8” Fishtail slip-ons (no baffles) 349.95 7 1 1801-0466 33” x 1 /8” Longtail slip-ons (no baffles) 399.95 7 1 1801-0467 36” x 1 /8” Longtail slip-ons (no baffles) 399.95 DS-2021791 30” x 17/8” Drag pipe slip-ons 299.95 DS-202154 11/2” x 10” baffle (ea.) 39.95 1

Use baffle DS-202154.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

437

SECTION

WINDSHIELDS & FAIRINGS TOURING 1801-0539

1801-0540

AUDIO & COMMUNICATION

1801-0203

1801-0537

LUGGAGE SEATS & SISSY BARS EXHAUST 1801-0348

FUEL/AIR SYSTEMS

1801-0541

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

1801-0372

4” SILVER BULLET™ MUFFLERS FOR DRESSERS •Increase horsepower and torque while improving gas mileage •High-quality construction with Samson’s Quad Chrome or Sinister black ceramic finish; tapered mufflers feature chrome end caps •Removable baffles allow customization of sound and performance (noted mufflers include Decibel Killer baffles) •Mounting hardware included •Sold in pairs •Optional Varitech (high-performance) and Decibel Killer (reduced sound emission) baffles available separately •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR 1801-0203 Chrome 30” mufflers w/ 1801-0537 Chrome 30” mufflers w/ (Decibel Killer baffles) 1801-0540 Chrome 35” mufflers w/ 1801-0539 Chrome 35” mufflers w/ (Decibel Killer baffles) 1 1801-0372 Chrome 34” Longtails

1801-0538 1861-0552

1861-0563

SUG. RETAIL chrome tips chrome tips chrome tips chrome tips

$599.95 599.95 599.95 599.95 599.95

PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR (CONT) 1801-0541 Chrome 32” Slash-cut mufflers 1801-0348 Black 30” mufflers w/ chrome tips 1801-0538 Black 30” mufflers w/ chrome tips (Decibel Killer baffles) OPTIONAL BAFFLES 1861-0552 Varitech 21/2” i.d. (ea.) 1861-0563 Decibel Killers (ea.) 1

DASHES & GAUGES

SUG. RETAIL $399.95 599.95 599.95 138.95 149.95

Will not accept Varitech baffles.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

438

3” SILVER BULLET™ MUFFLERS FOR SPRINGER SOFTAIL •3” fishtail mufflers with baffles •Mount to OEM bracket •Sold in pairs PART # DESCRIPTION FOR 97-03 FLSTS AND 05-07 FLSTSC DS-202199 291/4” Fishtail mufflers w/ baffle

SUG. RETAIL $499.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-0243 1800-1125

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1800-0244 1800-1126

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1800-0246

1800-0245

13/4” AND 2” “M” PIPES FOR DYNA GLIDE

CABLES

BRAKES

•Chrome-plated single-piece design •All pipes have 21/2” muffler bodies and come with baffles •13/4” pipes accept OEM heat shields; 2” pipes include heat shield •O2 sensor bung plugs included for non-sensor applications •Made in the U.S.A.

TANKS & OIL FILTERS

NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mounting bracket PART #DS-209936 or 1860-0391. PART # DESCRIPTION FOR 91-11 DYNA GLIDE (EXCEPT 08-11 FXDF, 10-11 FXDWG) 1800-0243 Tapered, 13/4” 1800-1125 Tapered, 2” 1800-0244 Slash-out, 13/4”

SUG. RETAIL $275.95 457.95 275.95

PART # DESCRIPTION SUG. RETAIL FOR 91-11 DYNA GLIDE (EXCEPT 08-11 FXDF, 10-11 FXDWG) (CONT) 1800-1126 Slash-out, 2” $457.95 1800-0245 Slash-down, 13/4” 275.95 1800-0246 Turnout, 13/4” 303.95

2” “M” PIPES FOR FLT •Traditional-style chrome staggered pipes feature 21/2” muffler bodies with all-steel muffler cores and heat shields •Rear pipe is a slip-fit that attaches to the OEM hanger bracket under the saddlebag •One-piece front pipe includes mounting hardware •Feature a stepped header design for increased performance when used on big-inch motors •O2 sensor bung plugs included for non-sensor applications •Made in the U.S.A. PART # DESCRIPTION FOR 85-09 FLHT/FLHX/FLHR/FLTR MODELS 1800-0618 Slash-out, 2”

SUG. RETAIL $454.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

439

SECTION

WINDSHIELDS & FAIRINGS TOURING SHOTGUN-STYLE “M” PIPES FOR FXST/FLST

AUDIO & COMMUNICATION

•Highly-chromed finish •All pipes have 21/2” muffler bodies and come with baffles •Accept OEM heat shields unless noted •Made in the U.S.A.

LUGGAGE

PART # DESCRIPTION FOR 90-06 FLSTF, FXSTD AND 93-96 FLSTN 1800-0068 Slash-out, 13/4”

SUG. RETAIL $275.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

PHD-123-T

PHD-123-SS

13/4” AND 2” “M” PIPES FOR FXR •One-piece design with top-quality chrome finish •All pipes have 21/2” muffler bodies and come with baffles •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Mount to the OEM bracket and must be used with factory clamps or PART #DS-209970 •Made in the U.S.A. PART # DESCRIPTION FOR 84-94, 99-00 FXR MODELS PHD-123-T Tapered, 13/4” PHD-123-SS Slash-out, 13/4”

SUG. RETAIL $252.95 252.95

PART # DESCRIPTION FOR 84-94, 99-00 FXR MODELS (CONT) PHD-223-SS Slash-out, 2” DS-203083 Heat shields for 84-94, 99-00 13/4” “M” pipes

SUG. RETAIL $287.95 67.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1800-0593 1800-0594

1800-0595

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

440

1800-0597

1800-0598

1800-0596

13/4” AND 2” “M” PIPES FOR FXST/FLST •Traditional-style, highly-chromed muffler pipes are crafted from one continuous piece of 16-gauge tubing •All pipes have 21/2” muffler bodies and include baffles •2” pipes feature a stepped header design for increased performance when used on big-inch motors •13/4” pipes accept OEM or Cycle Shack heat shields and 2” pipes accept Cycle Shack heat shields only •All necessary gaskets and mounting bracket included •Made in the U.S.A. FOR 07-11 FXST/B/C, FLSTC MODELS PART # DESCRIPTION 1800-0593 Tapered, 13/4” 1800-0597 Tapered, 2”

SUG. RETAIL $326.95 356.95

PART # 1800-0594 1800-0598

DESCRIPTION Slash-out, 13/4” Slash-out, 2”

SUG. RETAIL $326.95 356.95

PART # 1800-0595 1800-0596

DESCRIPTION Slash-down, 13/4” Turn-out, 13/4”

SUG. RETAIL $326.95 356.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

13/4” AND 2” “M” PIPES FOR FXST/FLST (CONT)

TOURING 1800-0060

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-0059 PART # DESCRIPTION FOR 00-06 FXST/C/S/B, FLST/C (INCLUDES MOUNT BRACKET) 1800-0059 Slash-out, 13/4” 1800-0060 Tapered, 13/4” 1800-0062 Slash-out, 2”

ENGINE

SUG. RETAIL $316.95 316.95 353.95

1800-0062

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES PHD-114-TA FOR 84-99 FXST; 86-99 FLST EXCEPT FLSTS; 85 FXE AND FXSB; AND 85-86 FXWG PART # DESCRIPTION SUG. RETAIL PHD-114-TA Tapered, 13/4” $252.95 3 PHD-114-SSA Slash-out, 1 /4” 252.95

PHD-114-SSA (MOUNTS TO OEM BRACKET) PART # PHD-214SSA PHD-114-TOA

BRAKES DESCRIPTION Slash-out, 2” Turnout, 13/4”

SUG. RETAIL $287.95 280.95

TANKS & OIL FILTERS

HEAT SHIELDS FOR CYCLE SHACK SOFTAIL M-PIPES

DASHES & GAUGES

1861-0049 1861-0050

1861-0052 1861-0053

HS-15X

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

HS-14X PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES HS-14X Front, for 13/4” pipes (23”) $77.95 HS-15X Rear, for 13/4” pipes (231/2”) 79.95

PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT) 1861-0049 Front, for 13/4” pipes (14”) $50.95 1861-0050 Rear, for 13/4” pipes (18”) 52.95

PART # DESCRIPTION SUG. RETAIL HEAT SHIELDS FOR 13/4” AND 2” M-PIPES (CONT) 1861-0052 Front, for 2” pipes (23”) $68.95 1861-0053 Rear, for 2” pipes (231/2”) 67.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

441

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1800-0603

1800-0604

PHD-116-TA

PHD-116-SSA

PHD-116-T0A

PHD-216-TA

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

442

13/4” AND 2” “M” PIPES FOR XL

BP-1

•Chrome one-piece design, with 21/2” muffler bodies •2” pipes have a stepped header design for added performance •13/4” pipes for 04-13 models use OEM heat shields •86-03 models will require separate purchase of heat shields •O2 sensor bung plugs included for 04-06 applications •Made in the U.S.A. PART # FOR ALL 04-13 1800-0603 1800-0604 FOR ALL 86-03 PHD-116-TA PHD-116-SSA PHD-116-TOA PHD-216-TA

DESCRIPTION XL MODELS Tapered, 13/4” Slash-out, 13/4” XL MODELS Tapered, 13/4” Slash-out, 13/4” Turnout, 13/4” Tapered, 2”

SUG. RETAIL $294.95 294.95 252.95 252.95 280.95 287.95

PART # DESCRIPTION SUG. RETAIL BRAKE STOP AND HEAT SHIELDS FOR 86-03 MODELS BP-1 Brake stop (86-87 only) $6.95 HS-16 Front heat shield for 13/4” pipes 59.95 HS-17 Rear heat shield for 13/4” pipes 59.95 HS-216 Front heat shield for 2” pipes 66.95 HS-217 Rear heat shield for 2” pipes 66.95

HS-17

HS-16

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1800-0600

1800-0602

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-0063

1800-0065

PHD-101-A

ELECTRICAL

LIGHTING HS-15X

HANDLEBARS, CONTROLS & MIRRORS

HS-14X

CABLES 1861-0049 1861-0050

BRAKES PHD-101SA

TANKS & OIL FILTERS

13/4” AND 2” DRAG PIPES FOR FXCW/FXST/FLST •High-quality chrome finish •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Come with mounting bracket unless noted •13/4” pipes accept OEM or Cycle Shack heat shields (unless noted); 2” pipes accept Cycle Shack heat shields only •Optional baffles sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-11 FXST/B/C AND FLSTC 1800-0600 Slash-out, 13/4” $280.95 1800-0602 Slash-out, 2” 307.95 FOR 00-06 FXST/C/S/B/D AND FLST/C 1800-0063 Slash-out, 13/4” 264.95 1800-0065 Slash-out, 2” 252.95 FOR 84-99 SOFTAIL (EXCEPT FLSTS), 85 FXE, FXSB AND 85-86 FXWG (MOUNT TO OEM BRACKET) PHD-101-A1 Slash-out , 13/4” 190.95 PHD-101SA1 Straight-cut , 13/4” 190.95 1 PHD-201-A Slash-out , 2” 220.95

DASHES & GAUGES

1861-0053 1861-0052

PART # DESCRIPTION SILENCER INSERTS / HEAT SHIELDS 1524 Silencer insert, 13/4” (EA.) 1526 Silencer insert, 2” (EA.) HS-14X Front heat shield, 13/4” pipes (23”) HS-15X Rear heat shield, 13/4” pipes (231/2”) 1861-0049 Front heat shield, 13/4” pipes (14”) 1861-0050 Rear heat shield, 13/4” pipes (18”) 1861-0052 Front heat shield, 2” pipes (23”) 1861-0053 Rear heat shield, 2” pipes (231/2”) 1

SUG. RETAIL $16.95 16.95 77.95 79.95 50.95 52.95 68.95 67.95

Pipes will fit FLSTF and 93-96 FLSTN models if muffler bracket PART #s DS-209930, DS-209931 or OEM #65459-84A is purchased.

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

443

SECTION

WINDSHIELDS & FAIRINGS TOURING 13/4” SHOTGUN DRAG PIPES FOR FXST/FLST

AUDIO & COMMUNICATION

•One-piece design with a chrome finish •Accept OEM heat shields •Optional baffles sold separately •Made in the U.S.A.

LUGGAGE

PART # DESCRIPTION SUG. RETAIL FOR 90-06 FLSTF, 93-96 FLSTN AND 00-06 FXSTD 1800-0066 Slash-out, 13/4” $211.95 1524 Silencer insert, 13/4” (ea.) 16.95

1800-0066

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE PHD-101-GA

TRANSMISSION & DRIVELINE

13/4” AND 2” SHOTGUN DRAG PIPES FOR FXST/FLST

GASKETS & SEALS

•Chrome shotgun pipes measure 40” long •2” pipes feature a stepped header design for increased flow when used on big-inch motors •Front pipe mounts to OEM bracket •Heat shields and baffles sold separately •Made in the U.S.A.

ELECTRICAL

NOTE: Will not work with saddlebags.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

PHD-201-GA

FOR 84-99 FXST; 86-99 FLST (EXCEPT FLSTF, FLSTN AND FLSTS) PART # DESCRIPTION PHD-101-GA Slash-out, 13/4” PHD-201-GA Slash-out, 2” HS-14X Front heat shield, 13/4” (23”) 1861-0049 Front heat shield, 13/4” (14”)

SUG. RETAIL $190.95 220.95 77.95 50.95

1861-0049

PART # 1861-0047 1524 1526

1861-0047

DESCRIPTION Rear heat shield, 13/4” Silencer insert, 13/4” (ea.) Silencer insert, 2” (ea.)

SUG. RETAIL $56.95 16.95 16.95

CABLES

BRAKES 1800-1124

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

444

1800-0247

13/4” AND 2” DRAG PIPES FOR DYNA GLIDE •Chrome one-piece design •Specifically designed to mount easily onto Dyna Glide models •2” pipes feature a stepped header design for increased performance when used on big-inch motors •13/4” pipes accept OEM heat shields; 2” pipes include heat shields •Include O2 sensor bung plugs for non-sensor applications •Silencer inserts sold separately •Made in the U.S.A. NOTE: Mounts to OEM bracket on 95-11 models. 91-94 models must use mount bracket 1860-0391 or DS-209936.

1800-1128 PART # DESCRIPTION FOR 91-11 DYNA GLIDE (EXCEPT 10-11 FXDWG, 08-11 FXDF) 1800-0247 Slash-out, 13/4” 1800-1124 Slash-out, 2” 1800-1128 Straight-cut, 13/4” 1524 Silencer insert for PART #PHD-149C, 13/4” (ea.) 1526 Silencer insert for PART #PHD-249, 2” (ea.)

SUG. RETAIL $220.95 385.95 220.95 16.95 16.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING 13/4” AND 2” DRAG PIPES FOR FLT

AUDIO & COMMUNICATION

•Straight-through chrome pipe set includes channel mounts and hardware for mounting to factory brackets •Pipes measure 40” •Include O2 sensors and plugs for non-sensor applications •2” pipes include heat shields •Optional baffles sold separately •Made in the U.S.A.

LUGGAGE 1800-0673

PART # DESCRIPTION FOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS 1800-0673 Slash-out, 13/4” 1800-0674 Slash-out, 2”

SUG. RETAIL $275.95 376.95

1800-0674

SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL FOR 85-13 FLT/FLHT/FLHX/FLHS/FLHR AND FLTR MODELS (CONT) 3 1524 Silencer insert, 1 /4”, (ea.) $16.95 1526 Silencer insert, 2”, (ea.) 16.95

13/4” AND 2” DRAG PIPES FOR FXR

FUEL/AIR SYSTEMS

•Chrome channel-mount pipes attach to factory hanger bracket •OEM midway clamps, or PART #DS-209970, must also be used •2” pipes have a stepped header design •Made in the U.S.A. PART # DESCRIPTION FOR 84-94, 99-00 FXR PHD-100 Slash-out, 13/4” PHD-200 Slash-out, 2” SILENCER INSERTS/HEATSHIELDS 1524 Silencer insert, 13/4” (ea.) 1526 Silencer insert, 2” (ea.) DS-203083 Heat shields for PHD-100 (pr.)

EXHAUST

ENGINE

SUG. RETAIL $190.95 220.95

TRANSMISSION & DRIVELINE

16.95 16.95 67.95

PHD-100

GASKETS & SEALS ELECTRICAL

LIGHTING 1800-1235

HANDLEBARS, CONTROLS & MIRRORS

PHD-102-A

CABLES

BRAKES PHD-102-SA

13/4” AND 2” DRAG PIPES FOR XL •40” chrome pipes mount to OEM mounting bracket •2” pipes feature a stepped header design for increased performance when used on big-inch motors •Fit all models including 883C and 1200C •86-87 XL models require brake stop BP-1 (must be ordered separately) •04-13 models use OEM heat shields on 13/4” pipes; 2” pipes include heat shields •04-13 pipes include O2 sensor bung plugs for 04-06 applications •Heat shields for other models and baffles for all models are available separately •Made in the U.S.A. PART # DESCRIPTION FOR 04-13 XL MODELS 1800-0610 Slash-out, 13/4” 1800-0612 Slash-out, 2” 1800-0611 Slash-down, 13/4” 1800-1235 Straight-cut, 13/4” FOR 86-03 XL MODELS PHD-102-A Slash-out, 13/4” PHD-102-SA Straight-cut, 13/4” PHD-202-A Slash-out, 2”

SUG. RETAIL $238.95 404.95 238.95 238.95 190.95 190.95 220.95

TANKS & OIL FILTERS

PHD-202-A HS-16

HS-17

DASHES & GAUGES

HS-217

PART # DESCRIPTION BAFFLES AND HEAT SHIELDS 1524 Silencer insert 13/4”, (ea.) 1526 Silencer insert 2”, (ea.) BP-1 Brake stop, 86-87 HS-16 Front heat shield for 13/4” pipes, 86-03 HS-17 Rear heat shield for 13/4” pipes, 86-03 HS-216 Front heat shield for 2” pipes, 86-03 HS-217 Rear heat shield for 2” pipes, 86-03

HS-216 SUG. RETAIL $16.95 16.95 6.95 59.95 59.95 66.95 66.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

445

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1802-0123

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

1801-0123 w/ 1801-0440 mufflers

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1801-0124 w/ 1801-0445 mufflers

BRAKES 1801-0442

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

446

13/4” AND 2” STEPPED HEADER SYSTEMS AND MUFFLERS WITH CATALYSTS •Increase flow and performance •Headers include O2 bungs for both 12mm and 18mm sensors •Heat shields and mounting hardware included •Mufflers feature internal catalysts; sold in pairs •2” headers must be used with performance mufflers listed; will not accept other mufflers •Headpipes and mufflers are sold separately •Made in the U.S.A. FOR 09-13 FLHT/FLHR/FLHX/FLTR MODELS PART # DESCRIPTION HEADRER SYSTEM 1802-0123 13/4” 1802-0124 2” PART # DESCRIPTION 31/2” MUFFLERS FOR 13/4” HEADER SYSTEM 1801-0440 Slash-down 1801-0441 Slash-out 1801-0442 Straight-cut Bazooka Tube™ 1801-0443 Slash-up

1801-0443 SUG. RETAIL $516.95 523.95 SUG. RETAIL $656.95 656.95 656.95 656.95

PART # DESCRIPTION 31/2” MUFFLERS FOR 2” HEADER SYSTEM 1801-0444 Slash-down 1801-0445 Slash-out 1801-0446 Straight-cut Bazooka Tube™ 1801-0447 Slash-up

SUG. RETAIL $675.95 675.95 675.95 675.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS 2-1-2 HEADER

TOURING

•Replacement non-catalyst header for 09-13 Dresser models with 2-1-2 OEM-style catalyst header and dual mufflers •Chrome-plated, mild-steel construction •Increases exhaust flow and provides less heat to riders leg •Reuses OEM heat shields and cross-under pipe •Includes both large (18mm) and small (12mm) O2 bungs •Made in the U.S.A. PART # 1802-0219

DESCRIPTION For 09-13 FLHT/FLHR/FLTR/FLHX models

AUDIO & COMMUNICATION LUGGAGE

SUG. RETAIL $399.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

HEADPIPES FOR TOURING MODELS 13/4”

•Feature individual chrome header pipes that eliminate the Y-pipe off the rear cylinder •Increase the exhaust flow for better performance •Include heat shields, brackets, clamps and hardware •Accept any 95-13 OEM-style mufflers (sold separately) •Made in the U.S.A. PART # 1802-0013

TRANSMISSION & DRIVELINE

DESCRIPTION 95-06 FLT/FLHT/FLHX/FLTR and FLHR models

SUG. RETAIL $528.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1801-0302

1801-0304

1801-0610

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES 1801-0611

1801-0426

1801-0428

FOOTRESTS & LICENSE PLATE FRAMES

4” MUFFLERS FOR DRESSERS •Chrome finish •Designed for easy installation to OEM brackets •Made in the U.S.A.

1861-0601

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLTR AND FLHR MODELS (PR.) 1801-0302 Slash-down 1801-0304 Straight-cut Bazooka Tube™ 1801-0610 Tapered w/ gloss black end caps 1801-0611 3-ring w/gloss black end caps

SUG. RETAIL $413.95 413.95 634.95 639.95

PART # FOR 10 FLHX/FLTRX 1801-0425 1801-0426 1801-0428 1861-0601

DESCRIPTION (EA.) Slash-down Slash-up Slash-out Optional quiet baffle (ea.)

SUG. RETAIL $229.95 229.95 229.95 29.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

447

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0060

1801-0061

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1801-0062

1801-0063

TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0608

1801-0609

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0067

1801-0068

CABLES 3” MUFFLERS FOR DRESSERS BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

448

•Available with all-steel performance baffles or baffles with a woven stainless steel sound blanket •Baffles with woven stainless steel sound blanket help prevent hot spots and discoloration – take the “crackle” out of exhaust for a more mellow tone (recommended for fuel-injected models) •Easy installation to OEM brackets •Sold in pairs (unless noted) •Made in the U.S.A. FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS PART # DESCRIPTION SUG. RETAIL WITH ALL-STEEL PERFORMANCE BAFFLES 1801-0060 Slash-out $268.95 1801-0061 Slash-down 268.95 1801-0062 Straight-cut Bazooka Tube™ 268.95 1801-0063 Slash-up 268.95 1801-0608 Tapered w/ gloss black end caps 434.95 1801-0609 3-ring w/ gloss black end caps 439.95 BAFFLES WITH WOVEN STAINLESS STEEL SOUND BLANKET 1801-0067 Slash-out 298.95 1801-0068 Slash-down 298.95 1801-0069 Straight-cut Bazooka Tube™ 298.95 1801-0070 Slash-up 298.95 PART # FOR 10 FLHX/FLTRX (EA.) 1801-0429 1861-0602

DESCRIPTION Slash-down Optional quiet baffle

SUG. RETAIL $211.95 29.95

1801-0069

1801-0070

FOR L85-94 FLT/FLHT/FLHS AND FLHR MODELS PART # DESCRIPTION WITH ALL-STEEL PERFORMANCE BAFFLES 1801-0053 Slash-out 1801-0054 Slash-down 1801-0055 Straight-cut Bazooka Tube™

SUG. RETAIL $268.95 268.95 268.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 1801-0077

SEATS & SISSY BARS

TWO-PIECE TURNOUT MUFFLERS FOR DRESSERS •Top-quality, chrome replacement, 29” long two-piece mufflers •Include steel core baffles •Mounting brackets are welded on, eliminating the need for additional clamps •Sold in pairs •Made in the U.S.A. PART # 1801-0065

DESCRIPTION For 95-13 FLT/FLHT/FLHX/FLTR and FLHR models

SUG. RETAIL $427.95

•Simply installs onto the stock OEM head pipes •Feature great sound with increased performance •Chrome finish •Hardware/ mounting brackets included as needed •Mufflers sold in pairs •Optional chrome heat shields help prevent burns and protect muffler bodies •Front and rear heat shields sold separately •Made in the U.S.A.

EXHAUST

1801-0078

•Chrome mufflers are available in two different styles •All-steel performance baffles •Sold in pairs •Made in the U.S.A.

FUEL/AIR SYSTEMS

PART # DESCRIPTION FOR 97-07 FLSTS/C MODELS 1801-0077 Straight-cut Bazooka Tube™ 1801-0078 Slash-down

4” OVAL MUFFLERS

PART # 1801-0282

CHROME 3” MUFFLERS

SUG. RETAIL $275.95 275.95

1801-0580

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1801-0581

4” SLIP-ON REPLACEMENT MUFFLER •Muffler features an all-steel core that won’t burn out •Show-quality chrome finish will last for years •Muffler uses stock mounts •Made in the U.S.A.

FITS MODEL For 08-13 FXDF, 10-13 FXDWG

SUG. RETAIL $330.95

PART # FOR 12-13 FLD 1801-0580 1801-0581

DESCRIPTION

Slash-out Slash-down

ELECTRICAL

LIGHTING SUG. RETAIL $199.95 199.95

21/2” SLIP-ON REPLACEMENT MUFFLERS •Mufflers feature all-steel cores that won’t burn out •Show-quality chrome will last for years •Mufflers use stock mounts •Sold in pairs •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1801-0210

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1801-0212

1801-0213

PART # DESCRIPTION FOR 07-13 FXST/B/C, FLSTC, 08-11 FXCW/C 1801-0210 Slash-down 1801-0211 Slash-out 1801-0212 Tapered 1801-0213 Turn-out

SUG. RETAIL $174.95 174.95 174.95 183.95

SLIP-ON REPLACEMENT MUFFLERS continued on next page. We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

449

SECTION

WINDSHIELDS & FAIRINGS

SLIP-ON REPLACEMENT MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0012

1801-0014

1801-0013 PART # DESCRIPTION FOR 00-06 FXST/B/C/S, FLST/C (INCLUDES MOUNT BRACKET) 1801-0012 Slash-out 1801-0013 Tapered 1801-0014 Turn-out

SUG. RETAIL $257.95 257.95 264.95

PART # DESCRIPTION FOR 84-99 FX, FXWG, FLST, FXST; 90-94 FLSTF, FLSTN MHD-134T Tapered MHD-134SS Slash-out MHD-134TO Turnout

SUG. RETAIL $172.95 172.95 179.95

ENGINE TRANSMISSION & DRIVELINE 1801-0217

1801-0216

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS

MHD-138-T

MHD-138-SS PART # FOR 07-13 FLSTF, FXSTD 1801-0214 1801-0215 1801-0216 1801-0217

DESCRIPTION Slash-down Slash-out Tapered Turn-out

PART # FOR 95-99 FLSTF, FLSTN MHD-136SS

SUG. RETAIL $174.95 174.95 174.95 183.95

PART # DESCRIPTION FOR 00-06 FLSTF, FXSTD (INCLUDES MOUNT BRACKET) MHD-138-SS Slash-out MHD-138-T Tapered HS-38 Rear heat shield HS-37 Front heat shield

DESCRIPTION

SUG. RETAIL $183.95 183.95 72.95 57.95 SUG. RETAIL

Slash-out

$172.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

450

1801-0043

1801-0041 1801-0042 PART # DESCRIPTION FOR 07-13 FLSTN/I, 08-11 FLSTSB 1801-0218 Slash-down 1801-0219 Slash-out 1801-0220 Tapered 1801-0221 Turn-out

SUG. RETAIL $174.95 174.95 174.95 183.95

PART # FOR 05-06 FLSTN 1801-0041 1801-0042 1801-0043

DESCRIPTION Slash-out Slash-down Turn-out

SUG. RETAIL $174.95 174.95 183.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

SLIP-ON REPLACEMENT MUFFLERS (CONT)

TOURING AUDIO & COMMUNICATION LUGGAGE MT-129

MS-129

MTO-129

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1801-0286

1801-0284

1801-0287

ENGINE

NOTE: Dyna Glide pipes mount to OEM bracket on 95-13 models; 91-94 models will require mount bracket DS-209936. PART # DESCRIPTION SUG. RETAIL FOR 91-13 DYNA GLIDE MODELS (EXCEPT 12-13 FLD, 08-13 FXDF, 10-13 FXDWG) MT-129 Tapered $172.95 MS-129 Slash-out 172.95 MTO-129 Turnout 181.95 DS-209936 Chrome mount bracket; repl. OEM #65674-95 43.95

PART # DESCRIPTION FOR 08-13 FXDF, 10-13 FXDWG 1801-0286 Tapered 1801-0284 Slash-out 1801-0287 Slash-down

SUG. RETAIL $190.95 190.95 190.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING PART # FOR 87-94 FXR MODELS MS-123

DESCRIPTION

SUG. RETAIL

Slash-out

HANDLEBARS, CONTROLS & MIRRORS

$172.95

CABLES

BRAKES TANKS & OIL FILTERS 1801-0009 PART # DESCRIPTION FOR 04-13 XL MODELS 1801-0009 Slash-Out

SUG. RETAIL $188.95

1801-0010 PART # DESCRIPTION FOR 04-13 XL MODELS (CONT) 1801-0010 Tapered

SUG. RETAIL $188.95

1801-0011 PART # DESCRIPTION FOR 04-13 XL MODELS (CONT) 1801-0011 Turnout

SUG. RETAIL $197.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

MXL-134TA PART # DESCRIPTION FOR 86-03 XL MODELS MXL-134TA Tapered

SUG. RETAIL $172.95

MXL-134SSA PART # DESCRIPTION FOR 86-03 XL MODELS (CONT) MXL-134SSA Slash-out

MXL-134TOA SUG. RETAIL $172.95

PART # DESCRIPTION FOR 86-03 XL MODELS (CONT) MXL-134TOA Turnout

SUG. RETAIL $183.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

451

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

1800‑0922

LUGGAGE SEATS & SISSY BARS

1802‑0056

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

13/4” UPSWEEP DRAG PIPES AND HEADPIPES FOR TWIN CAM SOFTAILS •Drag pipes available in an unbaffled Fishtail style •Includes hanger brackets and heat shields •Headpipes can be used with a variety of universal mufflers and extensions; sold separately •Chrome finish •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount headpipes. Mounting clamps are sold separately. PART # FOR 00‑06 FXST/FLST 1800‑0922

DESCRIPTION

SUG. RETAIL

Upsweep Fishtail drag pipes

$622.95

PART # DESCRIPTION FOR 00‑06 FXST/FLST (CONT) 1802‑0056 Upsweep headpipes

SUG. RETAIL $485.95

LIGHTING 1800‑0946

HANDLEBARS, CONTROLS & MIRRORS 1800‑0932

CABLES 13/4” UPSWEEP DRAG PIPES FOR EVOLUTION SOFTAILS BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Three different styles of chrome drag pipes to choose from •Include mounting brackets and hardware •Will fit with aftermarket kick start kits •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately. PART # DESCRIPTION FOR 86‑99 FXST/FLST MODELS 1800‑0946 Fishtail drag pipes 1800‑0932 Goose‑cut drag pipes 1800‑0905 Straight‑cut drag pipes

SUG. RETAIL

1800‑0905 $579.95 485.95 485.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

452

13/4” HEADPIPES FOR EVOLUTION SOFTAILS •Chrome headpipes for use with tailpipe extensions or universal mufflers •Bolt to stock mounts and include mounting hardware and heat shields •Made in the U.S.A.

1802‑0074

NOTE: Additional mounting clamps may be required to mount headpipes. Mounting clamps are sold separately. PART # DESCRIPTION FOR 95‑99 FXST/FLST MODELS 1802‑0075 Upsweep Shotgun headpipes

SUG. RETAIL $458.95

PART # DESCRIPTION FOR 84‑94 FXST/FLST MODELS 1802‑0074 Upsweep Shotgun headpipes

SUG. RETAIL $393.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800‑0925

1802‑0065 Mufflers not included

13/4”

DRAG PIPES AND HEADPIPES FOR L85‑06 TOURING MODELS

EXHAUST

•Pipes feature a bright chrome finish •40” drag pipes include mounting hardware and slider channel for easier mounting •All pipes include heat shields •Headpipes can be used with a variety of universal mufflers and extensions; sold separately •Made in the U.S.A.

FUEL/AIR SYSTEMS

1802‑0080 1802‑0059

ENGINE

NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately. PART # DESCRIPTION FOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS 1800‑0925 40” Slash‑cut drag pipes for L85‑06 models 1802‑00651 Dual headpipe set for 99‑06 models 1 1802‑0064 Dual headpipe set for 95‑98 models

SUG. RETAIL $344.95 689.95 689.95

PART # DESCRIPTION SUG. RETAIL FOR L85‑06 FLT, FLHT, FLHX, FLHR, FLHS AND FLTR MODELS (CONT) 1802‑00801 Dual headpipe set for L85‑94 models $689.95 1802‑0059 2‑into‑1 headpipes only for L85‑94 models 485.95 1

TRANSMISSION & DRIVELINE GASKETS & SEALS

Includes crossover mounting bracket.

ELECTRICAL 1800‑1024

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

13/4” DRAG PIPES FOR EVOLUTION SPORTSTER •Chrome drag pipes for rubber‑mounted Evolution Sportsters •Mount to OEM bracket with included mounting hardware kit •Reuses OEM heat shields •Measures 40” L •Made in the U.S.A. PART # DESCRIPTION FOR 07‑13 XL MODELS 1800‑1023 40” Slash‑cut drag pipes 1800‑1024 40” Goose‑cut drag pipes

SUG. RETAIL $223.95 223.95

CABLES 1800‑0936 PART # DESCRIPTION FOR 04‑06 XL MODELS 1800‑0936 40” Goose‑cut drag pipes

BRAKES

SUG. RETAIL $150.95

TANKS & OIL FILTERS DASHES & GAUGES

13/4” DRAG PIPES FOR EVOLUTION XL •Chrome pipes fit all 86‑03 Evolution Sportster models with stock frames •Pipes mount to OEM brackets (unless noted) •Heat shields included •Made in the U.S.A. NOTE: Additional mounting clamps may be required to mount exhaust systems and headpipes. Mounting clamps are sold separately. PART # FOR 86‑03 XL 1800‑0909

DESCRIPTION 40” Goose‑cut drag pipes

FRAMES, SUSPENSION & FENDERS

1800‑0908

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1800‑0909 SUG. RETAIL $344.95

PART # FOR 86‑03 XL (CONT) 1800‑0908

DESCRIPTION 40” Slash‑cut drag pipes

SUG. RETAIL $344.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

453

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1800‑0910

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1800‑0933

BUILD YOUR OWN PIPE (“BYOP”) 13/4” EXHAUST PIPE KIT

13/4”

DRAG PIPES FOR XL WITH RIGID FRAMES •Chrome drag pipes fit all 86‑03 XL motors mounted in rigid frames •Include slider channels and mounting brackets •Made in the U.S.A.

1800‑0911

NOTE: Additional mounting clamps may be required to mount exhaust systems. Mounting clamps are sold separately. PART # DESCRIPTION FOR 86‑03 XL MODELS WITH RIGID FRAMES 1800‑0933 40” Slash‑cut Shotgun drag pipes w/ slider channels and hanger bracket 1800‑0910 Slash‑cut Upsweep drag pipes w/ hanger bracket 1800‑0911 Straight‑cut Upsweep drag pipes w/ hanger bracket

ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $344.95 579.95 579.95

•Everything you need to fabricate a 13/4”‑diameter custom exhaust system •Kit includes two 24” straight pipes, two 15” 30° bend pipes, two 15” 45° bend pipes, two 15” 75° bend pipes, two 30” 160° bend pipes, two 3” sliders, six 15/8” o.d. sleeves and two 12” straight sections with two sleeves for ports; mounting brackets and flanges sold separately •Made in the U.S.A. SUG. PART # DESCRIPTION 1802‑0108 For Twin Cam, Evolution Big Twin and Sportster engines

RETAIL $230.95

0410‑2610

FISHTAIL EXTENSION

BELL TIP MUFFLERS

•17/8” chrome straight‑thru Fishtail tail pipe extension •Does not require additional brackets to install •Measures 29” L •Sold each •Made in the U.S.A.

•Real ‘60s chopper‑style look •Available in two lengths with a 13/4” i.d. inlet •Universal 3” slider mount on back side of muffler •Sold each •Made in the U.S.A. SUG.

PART # 1801‑0294

DESCRIPTION For L85‑94 FLT/FLHT models

SUG. RETAIL $134.95

PART # 0410‑2610

DESCRIPTION Short, 20” long

0410‑2611

RETAIL $148.95

PART # 0410‑2611

DESCRIPTION Long, 22” long

SUG. RETAIL $154.95

CABLES

BRAKES DS‑202057

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

454

DS‑202055

MUFFLERS •3” chrome, one‑piece 29” L mufflers with welded‑on mounting brackets need no additional clamps •All‑steel baffle construction •Sold individually •Made in the U.S.A. PART # DESCRIPTION FOR L85‑94 FLT, FLHT MODELS DS‑202057 Turnout muffler, right, 29” DS‑202058 Turnout muffler, left, 29”

SUG. RETAIL $181.95 197.95

PART # DESCRIPTION FOR L85‑94 FLT, FLHT MODELS (CONT) DS‑202055 Tapered muffler, 29” (ea.)

SUG. RETAIL $199.95

FISHTAIL MUFFLERS •21/2” chrome mufflers slip over any 13/4” diameter headpipe •Measure 30” long •Baffles are not removable •Sold each •Made in the U.S.A. PART # FOR 84 FLT/FLHT 1801‑0292

DESCRIPTION Left side

1801‑0293

SUG. RETAIL $146.95

PART # FOR 84 FLT/FLHT (CONT) 1801‑0293

DESCRIPTION Right side

SUG. RETAIL $146.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING Powerport

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0109 1802-0113

POWERPORT HEADPIPES •Dual headpipes taken to a whole new level •PowerPort crossover provides power boost across entire rpm range •Dual pipe styling with 2-into-1 performance •2.5” heat shields •Quick, simple installation •Accepts OEM mufflers or any 95-13 OEM style mufflers •Made in the U.S.A. NOTE: Mufflers not included; must be purchased separately.

PART # DESCRIPTION WITH CHROME HEATSHIELDS 1802-0114 For 10-13 FLHT/FLHR models 1802-0109 For 09 FLHT/FLHR/FLHX/FLTR models WITH BLACK HEATSHIELDS 1802-0115 For 10-13 FLHT/FLHR models 1802-0113 For 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $459.95 459.95

FUEL/AIR SYSTEMS ENGINE

539.95 539.95

TRANSMISSION & DRIVELINE 1800-0634

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Right side 1800-0635

Left side

CABLES

TRUE DUALS HEADER SYSTEM •Systems feature individual 13/4” headpipes for increased exhaust flow •2.5” one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins •Accepts Cobra slip-on mufflers or any 95-13 OEM-style mufflers NOTE: Mufflers not included; must be purchased separately.

BRAKES PART # 1800-0635 1800-0634

DESCRIPTION For 07-08 FLHT, FLTR, FLHR models For 95-06 FLT, FLHT, FLTR, FLHR models

SUG. RETAIL $409.95 409.95

SPEEDSTER DUALS •Great sound that’s enhanced by the proprietary PowerPort crossover •PowerPort crossover also provides power boost across entire rpm range •Traditional dual pipe styling with 2-into-1 performance •2.5” heat shields •Straight-cut, chromed billet tip finishes off the pipes •Quick, easy installation •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

Powerport

FOOTRESTS & LICENSE PLATE FRAMES

PART # DESCRIPTION WITH CHROME HEATSHIELDS 1800-1230 For 10-13 FLHT/FLHR models 1800-1176 For all 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $649.95 649.95

WHEELS & AXLES

1800-1229

1800-1176

PART # DESCRIPTION WITH BLACK HEAT SHIELDS 1800-1231 For 10-13 FLHT/FLHR models 1800-1229 For all 09 FLHT/FLHR/FLHX/FLTR models

SUG. RETAIL $749.95 749.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

455

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 1801-0359

EXHAUST FUEL/AIR SYSTEMS ENGINE 1801-0361

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 1801-0363

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES 1801-0642

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

456

3” SLIP-on MUFFLErS •3” chromed or black muffler bodies for great sound •Radially slashed, chromed billet tips can be rotated to three positions •Includes OEM-style cross-over on models that came stock with one for enhanced performance •Comes with 2” constant velocity baffles that use bonded e-class sleeve with stainless mesh •Fits stock headpipes •Easy installation using stock mounting brackets •Made in the U.S.A. PArT # CHroME 1801-0359 1801-0360 1801-0361 1801-0362 1801-0488 1801-0363 1801-0364 1801-0365 1801-0366 1801-0642

DESCrIPTIon

SUG. rETAIL

For 00-06 FLSTF/FXSTD models For 07-13 FLSTF/FXSTD models For 07-13 FLSTN/FLSTSB models For 07-13 FXST/B/C, FLSTC, FXCW/C models For 00-06 FXST/B/C/S models For 91-13 FXD/FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 08-13 FXDF, 10-13 FXDWG models For 95-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models For 04-13 XL models For 12-13 XL1200V models

$309.95 309.95 309.95 309.95 309.95 309.95 309.95 349.95 309.95 309.95

3” Cut-away PArT # BLACK 1801-0484 1801-0485 1801-0486 1801-0487 1801-0489 1801-0490 1801-0491 1801-0492 1801-0493 1801-0643

DESCrIPTIon For 00-06 FLSTF/FXSTD models For 07-13 FLSTF/FXSTD models For 07-13 FLSTN/FLSTSB models For 07-13 FXST/B/C, FLSTC, FXCW/C models For 00-06 FXST/B/C/S models For 91-13 FXD/FXDWG models (except 08-13 FXDF, 10-13 FXDWG, 12-13 FLD) For 08-13 FXDF, 10-13 FXDWG models For 95-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models For 04-13 XL models For 12-13 XL1200V models

SUG. rETAIL $359.95 359.95 359.95 359.95 359.95 359.95 359.95 399.95 359.95 359.95

We recommend installing an Fi2000 PowrPro TUnEr with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 For IMPorTAnT InForMATIon rEGArDInG CErTAIn wArrAnTY AnD EXHAUST rEGULATorY CoMPLIAnCE InForMATIon. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

TRI-FLO SLIP-ON MUFFLERS •Tri-oval-shaped muffler rear seamlessly transforms into 4-inch round front •5-inch wide, 4-inch tall thin-line aluminum tip •3-inch core for superior performance •Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention •Uses proprietary materials with specific acoustical dampening and thermal insulation properties •The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones •Made in the U.S.A. PART # 1801-0637

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome

LUGGAGE SEATS & SISSY BARS 1801-0637

SUG. RETAIL $599.95

PART # 1801-0638

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black

EXHAUST SUG. RETAIL $649.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

POWR-FLO 41/2” SLIP-ON MUFFLERS

ELECTRICAL

•4.5 inch body tapers to 4-inch round at the front •4.5-inch machined aluminum, thin-line tip •3-inch core for superior performance •Acoustical engineering developments allow an incredibly deep sound because of intense, class-leading resonance absorption and prevention •Uses proprietary materials with specific acoustical dampening and thermal insulation properties •The frequency and location of the perforation patterns in the cores creates significant sound scattering in the mid frequencies, which helps to enhance the low frequency tones •Made in the U.S.A. PART # 1801-0639

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, chrome

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0639

SUG. RETAIL $599.95

PART # 1801-0640

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR, black

SUG. RETAIL $649.95

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES CENTER-PRO SLIP-ON MUFFLER •Industry first, center-port exhaust with superior performance •Unique 2-into-1 design •Both mufflers join at the rear beneath the fender for center port exhaust location •Slips on as a single unit to the stock head pipes (or Cobra PowerPort Dual head pipes) •Not designed to fit on motorcycles using extended bags •Single, polished and chromed steel exhaust tip finished with a perfectly rolled edge •Constant velocity baffles are not removable •Made in the U.S.A. PART # 1801-0641

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLHX/FLTR

SUG. RETAIL $599.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

457

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE TRI-OVAL SLIP-ON MUFFLERS SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

•Incredible deep resonance that passes existing sound guidelines •Tri-Oval design with full-size, billet V-tip with dual exhaust ports •Round front seamlessly morphs to tri-oval shape at the rear •Nearly 5.5” wide and 3.5” high at the rear •Increased performance gains over stock mufflers •Also available with black body and chromed tip •Mufflers end at the rear of the bags •Simple installation; mounts to stock headpipes or to Cobra PowerPort headpipes •Made in the U.S.A. PART # CHROME 1801-0358 1801-0455

DESCRIPTION

1801-0358

SUG. RETAIL

For 95-13 FLHT/FLHR/FLHX/FLTR models For 10 FLHX/FLTRX models

$539.95 269.95

PART # BLACK 1801-0408

DESCRIPTION

SUG. RETAIL

For 95-13 FLHT/FLHR/FLHX/FLTR models

$639.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BLV6201SD

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1801-0497

CABLES BLV6201UC

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

458

1801-0099

1801-0590

Billet end tip

4” SLIP-ON MUFFLERS •Increase horsepower and torque with a deeper, more aggressive exhaust note •Welded from mild steel then bathed in a four-step chrome-plating process •4” muffler body uses a cooling chamber with proprietary technology to prevent blueing •Available in several styles: straight cut features billet tips •All necessary mounting hardware and instructions included, ensuring problem-free installation •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHR/FLHX/FLTR MODELS 1801-0497 Scallop cut BLV6201SD Slash Down BLV6201UC Upper Cut 1801-0099 Straight Cut w/ billet tip

SUG. RETAIL $499.95 419.95 419.95 485.95

PART # DESCRIPTION FOR 12-13 FLD 1801-0590 Slash Down FOR 10 FLHX/FLTRX MODELS 1801-0454 Straight Cut w/ billet tip

SUG. RETAIL $249.95 249.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

TRI-PRO 2-INTO-1 EXHAUST •2-into-1 exhaust system delivers increased low- and mid-range performance gains over the stock system •Features a unique tri-oval muffler 1800-1292 design, with a full-size, aluminum V-tip with dual exhaust ports •Available in chrome or black with a chromed aluminum V-tip •Heat shields mount to head pipes; heat shields cover collector area •Made in the U.S.A. PART # FOR 07-11 FXS/FXST/FLST 1800-1292 1800-1293

MUFFLER/HEAT SHIELD MODELS Chrome/chrome Black/black

SUG. RETAIL $689.95 789.95

TOURING AUDIO & COMMUNICATION 1800-1293 PART # MUFFLER/HEAT SHIELD FOR 86-06 FXST/FLST MODELS 1800-1290 Chrome/chrome 1800-1291 Black/black

SUG. RETAIL $689.95 789.95

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

1800-0087

TRANSMISSION & DRIVELINE

1800-0413 1800-1227

SPEEDSTER EXHAUSTS (WITH POWERPORT) •PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone •PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system •Large 2.5”, 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing •Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish •Available in slash-down, swept, short, long and xtra long styles •Includes mounting hardware and removable baffles for simple installation •Power with social responsibility •Made in the U.S.A.

GASKETS & SEALS Billet tip

ELECTRICAL

LIGHTING POWERPORT 1800-1402

NOTE: The Swept exhaust requires the removal of the right-side passenger footpeg; optional relocation bracket curves up from under the pipe to relocate the peg in the proper position. PART # DESCRIPTION SUG. RETAIL SLASH-DOWN 1800-1397 For all 12-13 FXST/FLST models, chrome heat shields $629.95 1800-1398 For all 12-13 FXST/FLST models, black heat shields 679.95 1800-0413 For all 07-11 FXST/FLST models, chrome heat shields 629.95 1800-1226 For all 07-11 FXST/FLST models, black heat shields 679.95 1800-0087 For all 86-06 FXST/FLST models, chrome heat shields 609.95 1800-0761 For all 08-11 FXCW/C models, chrome heat shields 629.95 1800-1399 For all 12-13 Dyna models (except FLD), chrome heat shields 629.95 1800-1400 For all 12-13 Dyna models (except FLD), black heat shields 679.95

PART # DESCRIPTION SLASH-DOWN (CONT) 1800-0808 For all 06-11 Dyna models, chrome heat shields 1800-1227 For all 06-11 Dyna models, black heat shields 1800-0088 For all 91-05 Dyna models, chrome heat shields 1800-1402 For all 07-13 XL models, chrome heat shields 1800-0414 For all 07-13 XL models, chrome heat shields 1800-1403 For all 07-13 XL models, black heat shields 1800-1401 For all 04-06 XL models, chrome heat shields

SUG. RETAIL $629.95 679.95 609.95 629.95 629.95 679.95 609.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1861-0534

DESCRIPTION For For For For For

07-11 07-11 86-06 08-11 08-11

FOOTRESTS & LICENSE PLATE FRAMES

1800-1225

1800-0972 PART # SWEPT 1800-0973 1800-1224 1800-0972 1800-0974 1800-1225

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL

FXST/FLST models, chrome heat shields FXST/FLST models, black heat shields FXST/FLST models, chrome heat shields FXCW/C models, chrome heat shields FXCW/C models, black heat shields

689.95 789.95 689.95 699.95 789.95

PART # DESCRIPTION SWEPT (CONT) 1861-0534 Optional footpeg relocation bracket for 86-11 FXST/FLST models 1861-0535 Optional footpeg relocation bracket for 08-11 FXCW/C models

SUG. RETAIL

$29.95 29.95

SPEEDSTER EXHAUSTS continued on next page.

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

459

SECTION

6 SPEEDSTER EXHAUSTS (WITH POWERPORT) (CONT)

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1800-1467

1800-1489 PART # DESCRIPTION SUG. RETAIL SHORT SWEPT 1800-1489 For all 10-13 Dresser models, chrome heat shields $699.95 1800-1490 For all 10-13 Dresser models, black heat shields 799.95 1800-1381 For all 12-13 FXST/FLST models, chrome heat shields 699.95 1800-1382 For all 12-13 FXST/FLST models, black heat shields 799.95 1800-1379 For all 07-11 FXST/FLST models, chrome heat shields 699.95 1800-1380 For all 07-11 FXST/FLST models, black heat shields 799.95

PART # DESCRIPTION SUG. RETAIL SHORT SWEPT (CONT) 1800-1378 For all 86-06 FXST/FLST models, chrome heat shields $699.95 1800-1468 For all 12-13 Dyna models (except FLD), chrome heat shields 699.95 1800-1469 For all 12-13 Dyna models (except FLD), black heat shields 799.95 1800-1466 For all 06-11 Dyna models, chrome heat shields 699.95 1800-1467 For all 06-11 Dyna models, black heat shields 799.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1800-0806

PART # SHORTS 1800-0759 1800-0025 1800-0806 1800-0026 1800-1392 1800-1391 1800-0210

DESCRIPTION For all 08-11 FXCW/C models, chrome heat shields For all 86-06 FXST/FLST models, chrome heat shields For all 06-11 Dyna models, chrome heat shields For all 91-05 Dyna models, chrome heat shields For all 07-12 XL models, chrome heat shields For all 04-06 XL models, chrome heat shields For all 04-06 XL models, chrome heat shields

SUG. RETAIL $599.95 599.95 599.95 599.95 599.95 599.95 599.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

Billet tip

CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1800-0027

PART # LONGS 1800-1404 1800-0415 1800-0027 1800-0809 1800-0028

DESCRIPTION For For For For For

all all all all all

12-13 07-11 86-06 06-11 91-05

FXST/FLST models, chrome heat shields FXST/FLST models, chrome heat shields FXST/FLST models, chrome heat shields Dyna models, chrome heat shields Dyna models, chrome heat shields

SUG. RETAIL $629.95 629.95 609.95 629.95 609.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

460

1800-0195

PART # DESCRIPTION XTRA LONGS 1800-0416 For all 07-08 Dresser models, chrome heat shields 1800-0195 For all 95-06 Dresser models, chrome heat shields

SUG. RETAIL $629.95 609.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1800-0199

1800-1396

DRAGSTERS

LUGGAGE

•Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance •Full-length, 2.5” heat shields with a 222° wraparound for a non-blueing appearance •Capped with machined and chromed billet tips •Removable performance cores •Feature power with social responsibility •Made in the U.S.A. PART # 1800-0411 1800-0760 1800-0199 1800-0807

SEATS & SISSY BARS EXHAUST Billet end tip

1800-0807

DESCRIPTION For all 07-11 FXST/FLST models For all 08-11 FXCW/C models For all 86-06 FXST/FLST models For all 06-11 Dyna models

SUG. RETAIL $519.95 519.95 499.95 519.95

PART # 1800-0198 1800-1396 1800-0412 1800-1395

DESCRIPTION For all 91-05 Dyna models For all 07-13 XL models For all 07-13 XL models For all 04-06 XL models

SUG. RETAIL $499.95 519.95 519.95 499.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING 21/4” HOT ROD EXHAUST SYSTEM •13/4” headpipes flow into 21/4” muffler bodies •Full-length 215° wraparound heat shields match the diameter of muffler bodies •Headpipes, mufflers and heat shields are triple chrome-plated •Removable baffles accessed by backing out a single screw •All necessary mounting hardware and instructions included, ensuring problem-free installation •Made in the U.S.A. PART # BLV6800

DESCRIPTION For 86-06 FXST/FLST

SUG. RETAIL $419.95

31/2” DELUXE SLASH CUT EXHAUST •13/4” headpipes flow into 31/2” muffler bodies •Mufflers feature radial slash cut •Full-length 215° wraparound heat shields run from exhaust port to muffler body •Headpipes, mufflers and heat shields are triple chrome-plated •Removable baffles accessed by backing out a single screw •All necessary mounting hardware and instructions included, ensuring problemPART # DESCRIPTION SUG. RETAIL free installation BLV6500 For 86-06 FXST/FLST $419.95 •Made in the U.S.A.

PART # 1800-1383 1800-0408 1800-0204 1800-1384 1800-0805 1800-0203 1800-0757 1800-0756 1800-1321

DESCRIPTION SUG. RETAIL For all 12-13 FXST/FLST models, chrome $589.95 For all 07-11 FXST/FLST models, chrome 589.95 For all 86-06 FXST/FLST models, chrome 569.95 For all 12-13 Dyna models (except FLD), chrome 589.95 For all 06-11 Dyna models, chrome 589.95 For all 91-05 Dyna models, chrome 569.95 For all 07-08 Dresser models, chrome 599.95 For all 95-06 Dresser models, chrome 579.95 For all 04-06 XL models, chrome 569.95

CABLES

BRAKES TANKS & OIL FILTERS

POWERPRO HP 2-INTO-1 EXHAUST •New design with a sleek cylindrical muffler body in addition to the megaphone style of the original PowerPro •Lustrously chromed 3.5” muffler body with a delicately machined chromed billet tip •Full-length chrome or black collector heat shield coverage •Internal cooling technology for non-blueing muffler body •Double-insulated body •Removable baffles •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-0204

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1800-1322 PART # 1800-1322 1800-1323 1800-1324

DESCRIPTION For all 04-06 XL models, black heat shields For all 07-13 XL models, chrome For all 07-13 XL models, black heat shields

SUG. RETAIL $669.95 589.95 689.95

We recommend installing an Fi2000 POWRPRO TUNER with any exhaust change on fuel-injected models. See Fi2000 pages in Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

461

SECTION

WINDSHIELDS & FAIRINGS TOURING 1802-0131

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1802-0251

POWER TRUE DUALS HEADERS •Independent dual look with “under the bike” cross-over •Hidden crossover passage between front and rear pipes for maximum performance •Full black ceramic heat shield with 220° coverage •Available in chrome or Jet-Hot® ceramic finish •Compatible with 95-13 style slip-on Dresser mufflers •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLHT, FLHR, FLHX, FLTR MODELS 1802-01311 Chrome 1802-02511 Black ceramic

SUG. RETAIL $524.95 624.95

FUEL/AIR SYSTEMS

PART # DESCRIPTION FOR 95-08 FLT, FLHT, FLHR, FLHX, FLTR MODELS 1802-01302 Chrome 1802-02502 Black ceramic 1 2

SUG. RETAIL $524.95 624.95

Has 12mm and 18mm sensor ports and plugs. Has 18mm sensor ports and plugs.

ENGINE TRANSMISSION & DRIVELINE

1801-0472 1801-0473

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SPO® OVAL SLIP-ON MUFFLERS

1801-0595

•Newly restyled S&S SPO® mufflers •Same great performance as S&S performance oval slip-ons, but feature sculpted alloy end-caps with chrome or black finish •Muffler features double-walled PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION construction, dual-layer wrapping FOR 95-13 FLT, FLHT, FLHR, FLHX AND FLTR MODELS FOR 95-13 FLT, FLHT, FLHR, FLHX AND and quality chrome or Jet-Hot® 1801-0472 Chrome w/ chrome end-cap $779.95 FLTR MODELS (CONT) ceramic finish 1801-0473 Chrome w/ high-temp black 1801-0595 Jet-Hot® ceramic •Sold in pairs Xylan® end-cap w/ chrome end-cap 899.95 •Made in the U.S.A.

SUG. RETAIL

$779.95

BRAKES 4” RACE TOUR MUFFLERS TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

462

•Produces exceptional mid-range to high end torque and horsepower •Loud aggressive sound with Race Tour Baffle •Fits all stock and aftermarket headers •4” diameter is the same as stock mufflers •Right muffler has special clearance for axle nut •Available with slash-down end caps or without end caps (opt. end caps must be ordered separately) in either chrome or Jet-Hot® black ceramic finish •Mounting hardware and instructions included for installation of the end cap •Made in the U.S.A.

1801-0616

1801-0619 Shown with 1861-0812 end caps

FOR 95-13 FLT, FLHT, FLHX, FLTR, FLHR AND H-D FL TRIKE MODELS (EXCEPT 10 FLHX/FLTRX) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 4” MUFFLERS, CHROME (PR.) OPTIONAL 4” END CAPS (PR.) 1801-0616 With slash down end caps $549.95 1861-0812 Chrome straight 1801-0618 Without end caps 524.95 1861-0813 Black straight 4” MUFFLERS, JET-HOT® BLACK CERAMIC (PR.) 1861-0814 Chrome sculpted Black sculpted 1801-0617 With slash down end caps 649.95 1861-0815 1801-0619 Without end caps 649.95

1861-0813

1861-0814 SUG. RETAIL $124.95 124.95 124.95 124.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 1801-0462

LUGGAGE

1801-0461

SEATS & SISSY BARS EXHAUST 1801-0464

FUEL/AIR SYSTEMS

1801-0596

31/2” POWER-TOUR MUFFLERS

ENGINE

•31/2” diameter mufflers with black ceramic finish •Great sound and increased performance •Work with stock or modified engines •Available in Power-Tour performance style •Sold in pairs •Made in the U.S.A.

TRANSMISSION & DRIVELINE

1801-0597

FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR AND H-D FL TRIKE MODELS WITH DUAL EXHAUST PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION POWER-TOUR POWER-TOUR (CONT) 1801-0461 Slash-back, chrome $398.95 1801-0464 Chrome w/ black Teflon™ billet end caps 1801-0462 Slash-down, chrome 398.95 1801-0597 Black ceramic w/ chrome billet end caps 1801-0596 Slash-down, black ceramic 500.00

SUG. RETAIL $547.95 629.95

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1801-0233

BRAKES

0410-6001

1801-0140

TANKS & OIL FILTERS DASHES & GAUGES

1801-0536

3” SLIP-ON PERFORMANCE MUFFLERS

FRAMES, SUSPENSION & FENDERS

•Increase your performance on a stock or modified motor •Finished in show-quality chrome, and are compatible with stock headpipes, mounting brackets, hardware and heat shields •Available in slash-cut or tapered design •Slash-cut baffles are removable, tapered are not removable •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-13 FXST/B/C, FLST/C, 08-11 FXCW/C 1801-0233 Slash-cut $389.95 1801-0232 Tapered 389.95 FOR 95-13 DYNA (EXCEPT 12-13 FLD, 08-13 FXDF, 10-13 FXDWG) 0410-6001 Slash-cut 324.95 1801-0140 Tapered 324.95

1801-0017 PART # FOR 08-13 FXDF, 10-13 FXDWG 1801-0536 FOR 04-13 XL 1801-0017 1801-0144

DESCRIPTION Slash-cut Slash-down Tapered

SUG. RETAIL $389.95 351.95 339.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

463

SECTION

6 1800-1296

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1295 1800-0999

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

CUSTOM EXHAUST SYSTEMS •Mandrel bent from .065” tube, then chromed to a show finish •Heat shields are included (unless noted) •All pipes (except 131’s) come with dual O2 sensor ports and plugs •103’s are triple stepped from 13/4” to 21/4” to 21/2” •131’s are triple stepped into a soft bend on a 2.5” mandrel bent thick-walled pipe •Phat’s pipes are stepped from 13/4” to 21/4”; available with heat shields •D-2’s are triple stepped ending with a 2.5” slash cut; available with chrome heat shields or black ceramic heat shields with holes that allow the chrome pipes to show through •D-3’s are triple stepped ending with 2.5” slash cut •Works with both left and right side drive bikes; also works on Big Dog motorcycles •Made in the U.S.A. PART # DESCRIPTION FOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS 1800-0999 103’s 1800-1295 Phat’s w/ heat shields

SUG. RETAIL $821.95 849.95

1800-1159

PART # DESCRIPTION SUG. RETAIL FOR 86-11 FXST/FLST AND MOST CUSTOM RIGID MODELS (CONT) 1800-1150 D-2’s w/ chrome heat shields $899.95 1800-1296 D-2’s w/ black heat shields 899.95 1800-1159 D-3’s 849.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

224 MUFFLERS •Give your V-Twin the look and sound of true American muscle •21/4” diameter bodies •Four fiber glass wrapped removable baffles unleash the growl and rumble that will bring your bike to life •Customize your pipes with optional Family Jewel billet tips (sold separately) •Easily installs to your stock head pipes •Sold in pairs •Made in the U.S.A. PART # 1801-0494

1801-0494

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLTR and H-D FL Trike

SUG. RETAIL $499.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

464

1811-1473

BELL-END MEGAPHONE MUFFLERS •Retro styling brings back the glory days of choppers •13/4” inlet; reducer allows additional fitment to 15/8” and 11/2” •Removable baffle •Available in standard or upswept styles •Sold each PART # 1811-1473 1811-1474 1811-1475

DESCRIPTION Standard, right- or left-side Upswept, left-side Upswept, right-side

SUG. RETAIL $73.95 82.95 82.95

1811-1475

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 1800-0029

FUEL/AIR SYSTEMS

1801-0299

RT-ONE EXHAUST SYSTEM •Complete exhaust system includes a large-diameter headpipe exiting into a lightweight aluminum muffler •Big power increase and huge weight savings •Straight-through perforated core offers maximum flow •Made in the U.S.A.

ENGINE RT-FIVE SLIP-ON MUFFLERS

•Available with aluminum or carbon fiber canisters •Free-flowing race baffle •Precision fit with fixed mounting points •Carbon fiber end cap •Dyno-tested for maximum horsepower gain •Include stainless steel mid-pipes •Made in the U.S.A.

PART # DESCRIPTION FOR 00-09 BUELL BLAST 1800-0029 RT-One system 1860-0008 Quiet Module Insert

PART # FOR 08-09 BUELL 1801-0299 1801-0300

SUG. RETAIL $345.95 39.95

DESCRIPTION 1125R Aluminum canister, carbon fiber end cap Carbon fiber canister, carbon fiber end cap

TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $537.95 644.95

ELECTRICAL

LIGHTING RT-ONE SLIP-ONS •Boost power over a wide rpm band •Free-flowing race-style baffle •Dyno-tested for smooth power delivery and superior performance •Available with polished aluminum or carbon fiber canisters •Quiet Module Insert (QMI) sold separately •Made in the U.S.A.

HANDLEBARS, CONTROLS & MIRRORS CABLES 1860-0007

BRAKES

NOTE: Jardine RT-One exhaust systems and slip-ons feature a high-flow large-diameter perforated core for maximum performance. Sound levels are racetrack-oriented. Jardine recommends the use of a QMI (Quiet Module Insert) to civilize and control the exhaust tone to reasonable levels for street use. PART # DESCRIPTION SUG. RETAIL FOR 03-08 XB9R, 04-09 XB12R/XB12S, 05-09 XB9SX, 08-09 XB12X (EXCEPT INTERNATIONAL MODELS) 1801-0004 Aluminum canister $361.95 1801-0005 Carbon fiber canister 472.95

1801-0004 PART # DESCRIPTION SUG. RETAIL FOR 03-08 XB9R, 04-09 XB12R/XB12S, 05-09 XB9SX, 08-09 XB12X (EXCEPT INTERNATIONAL MODELS) (CONT) 1860-0007 Quiet Module Insert $39.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

GP1 SLIP-ON MUFFLER •Stylish, affordable and lightweight •Muffler features a black powder-coated canister •Features a laser-etched GP1 logo •Installation is a breeze, requiring at the most a couple of wrenches and a screwdriver •Made in the U.S.A. PART # 1801-0261

DESCRIPTION For 02-08 XB9R, 05-09 XB9SX, 04-09 XB12R/S, 07-09 XB12X (except International models)

SUG. RETAIL $428.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

465

SECTION

WINDSHIELDS & FAIRINGS APEX EXHAUST SYSTEMS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

•Aggressive sound and look for closed course use only •Saves significant weight over stock system; improves even more the power-to-weight ratio •Complete system allows simple access to clutch and other areas under race conditions without dropping the engine out •Available in titanium or stainless steel •Made in the U.S.A. PART # 1800-1297 1800-1232

DESCRIPTION For 09-12 XR1200/1200X, titanium For 09 BUELL 1125R/CR/RR, stainless steel

1800-1297

SUG. RETAIL $1,999.95 1,699.95

EXHAUST 1801-0465

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

APEX SLIP-ON MUFFLERS •Carbon fiber or titanium slip-ons complement “racer look” of machines •Integrated fit to coordinate with body lines and maintain centralized mass design of motorcycle •Unique and distinctive sound due to overall diamond shape and outlet; quiet insert also included •Considerable weight savings over stock translates into more power •Improved ground clearance •Slip-on design provides easy installation •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

NOTE: PART #1801-0357 may require simple re-adjustment of stock header heat shields.

LIGHTING 1801-0357

HANDLEBARS, CONTROLS & MIRRORS

PART # 1801-0357 1801-0465

DESCRIPTION For 09-12 XR1200/1200X; carbon For 09 1125R/CR/RR; titanium

SUG. RETAIL $899.95 549.95

CABLES

BRAKES TANKS & OIL FILTERS 1812-0170

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

466

1812-0169

FAMILY JEWEL EXHAUST TIPS •Each tip can be rotated into almost limitless positions, and are sold individually so you can mix and match them to create a unique look for your motorcycle •Tips are adaptable to almost any straight-cut, 21/4” exhaust tube, such as those offered by Baron, LA Chopper, Samson, D&D, Cobra, BUB and Hardkrome •All tips come with a seamless mounting system for that smooth look •Made in the U.S.A. PART # 1812-0169 1812-0170 1812-0171

DESCRIPTION Xtreme Slash Scalloped Mini Scalloped

SUG. RETAIL $59.95 59.95 49.95

1812-0171

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS TOURING Clean Cut Contrast Cut™

Clean Cut Chrome

Slash Contrast Cut™

Slash Chrome

AUDIO & COMMUNICATION

Sweep Contrast Cut™

LUGGAGE Sweep Contrast Cut™

ELITE EXHAUST END CAPS

Sweep Chrome

Tech 10 Contrast Cut™

Merc Black Ops Tech 10 Chrome

•CNC machined billet aluminum construction •Available in chrome and Contrast Cut™ •Contrast Cut™ starts with a polished end cap that has been black anodized, then re-cut to open up the design •Available in four designs and six applications •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR RINEHART 3.5 MUFFLERS 1802-0135 Clean Cut, Contrast Cut $99.95 1802-0136 Clean Cut, chrome 99.95 1802-0137 Slash, Contrast Cut 99.95 1802-0138 Slash, chrome 99.95 1802-0139 Sweep, Contrast Cut 99.95 1802-0140 Sweep, chrome 99.95 1802-0141 Tech 10, Contrast Cut 99.95 1802-0142 Tech 10, chrome 99.95 1802-0223 Merc, Contrast Cut 99.95 1802-0224 Merc, chrome 99.95 1802-0225 Merc, Black Ops 99.95 FOR RINEHART 4” MUFFLERS 1802-0143 Clean Cut, Contrast Cut 99.95 1802-0144 Clean Cut, chrome 99.95 1802-0145 Slash, Contrast Cut 99.95 1802-0146 Slash, chrome 99.95 1802-0147 Sweep, Contrast Cut 99.95 1802-0148 Sweep, chrome 99.95 1802-0149 Tech 10, Contrast Cut 99.95 1802-0150 Tech 10, chrome 99.95 1802-0226 Merc, Contrast Cut 99.95 1802-0227 Merc, chrome 99.95 1802-0228 Merc, Black Ops 99.95 FOR SCREAMIN’ EAGLE 3.5” MUFFLERS 1802-0151 Clean Cut, Contrast Cut 99.95 1802-0152 Clean Cut, chrome 99.95 1802-0153 Slash, Contrast Cut 99.95 1802-0154 Slash, chrome 99.95 1802-0155 Sweep, Contrast Cut 99.95 1802-0156 Sweep, chrome 99.95 1802-0157 Tech 10, Contrast Cut 99.95 1802-0158 Tech 10, chrome 99.95 1802-0229 Merc, Contrast Cut 99.95

Merc Contrast Cut™

PART # DESCRIPTION SUG. RETAIL FOR SCREAMIN’ EAGLE 3.5” MUFFLERS (CONT) 1802-0230 Merc, chrome $99.95 1802-0231 Merc, Black Ops 99.95 FOR SCREAMIN’ EAGLE 4” MUFFLERS 1802-0159 Clean Cut, Contrast Cut 99.95 1802-0160 Clean Cut, chrome 99.95 1802-0161 Slash, Contrast Cut 99.95 1802-0162 Slash, chrome 99.95 1802-0163 Sweep, Contrast Cut 99.95 1802-0164 Sweep, chrome 99.95 1802-0165 Tech 10, Contrast Cut 99.95 1802-0166 Tech 10, chrome 99.95 1802-0232 Merc, Contrast Cut 99.95 1802-0233 Merc, chrome 99.95 1802-0234 Merc, Black Ops 99.95 FOR BASSANI SHORT MEGAPHONE (1/2” INTERNAL LIP) 1802-0167 Clean Cut, Contrast Cut 99.95 1802-0168 Clean Cut, chrome 99.95 1802-0169 Slash, Contrast Cut 99.95 1802-0170 Slash, chrome 99.95 1802-0171 Sweep, Contrast Cut 99.95 1802-0172 Sweep, chrome 99.95 1802-0173 Tech 10, Contrast Cut 99.95 1802-0174 Tech 10, chrome 99.95 1802-0235 Merc, Contrast Cut 99.95 1802-0236 Merc, chrome 99.95 1802-0237 Merc, Black Ops 99.95 FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP) 1802-0175 Clean Cut, Contrast Cut 99.95 1802-0176 Clean Cut, chrome 99.95 1802-0177 Slash, Contrast Cut 99.95 1802-0178 Slash, chrome 99.95

SEATS & SISSY BARS EXHAUST

Merc Chrome

PART # DESCRIPTION FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP) (CONT) 1802-0179 Sweep, Contrast Cut 1802-0180 Sweep, chrome 1802-0181 Tech 10, Contrast Cut 1802-0182 Tech 10, chrome 1802-0238 Merc, Contrast Cut 1802-0239 Merc, chrome 1802-0240 Merc, Black Ops FOR VANCE & HINES 3.5” MUFFLERS 1802-0183 Clean Cut, Contrast Cut 1802-0184 Clean Cut, chrome 1802-0185 Slash, Contrast Cut 1802-0186 Slash, chrome 1802-0187 Sweep, Contrast Cut 1802-0188 Sweep, chrome 1802-0189 Tech 10, Contrast Cut 1802-0190 Tech 10, chrome 1802-0241 Merc, Contrast Cut 1802-0242 Merc, chrome 1802-0243 Merc, Black Ops FOR VANCE & HINES 4” MUFFLERS 1802-0191 Clean Cut, Contrast Cut 1802-0192 Clean Cut, chrome 1802-0193 Slash, Contrast Cut 1802-0194 Slash, chrome 1802-0195 Sweep, Contrast Cut 1802-0196 Sweep, chrome 1802-0197 Tech 10, Contrast Cut 1802-0198 Tech 10, chrome 1802-0244 Merc, Contrast Cut 1802-0245 Merc, chrome 1802-0246 Merc, Black Ops

SUG. RETAIL

$99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1802-0212

EXHAUST TIPS FOR RINEHART EXHAUST •CNC-machined from 6061 T-6 billet aluminum •Designed to match Eddie Trotta Reverse Cut Fork Sliders •Available in two styles for 31/2” and 4” Rinehart exhaust in either chrome or black anodized finishes •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 31/2” RINEHART EXHAUST 1802-0216 Reverse cut, chrome 1802-0215 Reverse cut, black 1802-0218 Cross cut, chrome 1802-0217 Cross cut, black

FRAMES, SUSPENSION & FENDERS

1802-0211

FOOTRESTS & LICENSE PLATE FRAMES

1802-0214 1802-0213 SUG. RETAIL $309.95 309.95 309.95 309.95

PART # DESCRIPTION FOR 4” RINEHART EXHAUST 1802-0212 Reverse cut, chrome 1802-0211 Reverse cut, black 1802-0214 Cross cut, chrome 1802-0213 Cross cut, black

SUG. RETAIL $309.95 309.95 309.95 309.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

467

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

1802-0200

1802-0091

1802-0201

EXHAUST TIPS •CNC-machined billet aluminum construction •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR BASSANI 4” MEGAPHONE DRESSER MUFFLERS 1802-0091 Black diamond edge FOR 95-08 RINEHART “TRUE DUAL” DRESSER MUFFLERS 1802-0092 Black diamond edge

SUG. RETAIL $339.95 339.95

PART # DESCRIPTION FOR RINEHART 4” DIAMETER MUFFLERS 1802-0199 Gloss black powder coated 1802-0200 Chrome 1802-0201 Black diamond edge

SUG. RETAIL $359.95 359.95 499.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

1802-0100

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1802-0101

CHROME EXHAUST TIPS FISHTAIL EXHAUST TIP •Chromed steel exhaust tip for all 13/4” o.d. exhaust pipes •Sold each NOTE: Clamps must be purchased separately. PART # DS-202049

DESCRIPTION Exhaust tip

SUG. RETAIL $99.95

•Transform the stock mufflers into the nostalgic fishtail or more modern six-gun style •Clamp-on design adds a lot of style for a lot less than a custom system •Tips do not affect sound levels or exhaust performance •Sold in pairs PART # DESCRIPTION FOR 95-13 FLT, FLHT, FLHR, FLHX, FLTR MODELS (EXCEPT 10 FLHX/FLTRX) 1802-0100 Six-gun 1802-0101 Fishtail

SUG. RETAIL $149.95 149.95

1802-0262

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1861-0769

1861-0795

CABLES 1861-0799

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

468

1861-0803

SLIP-ON MUFFLER SLEEVES •Customize the look of your exhaust •Muffler sleeves are laser-cut steel construction •Install on mufflers for custom look or to hide scratches, scrapes, discoloration and rust •Durable black powdercoat finish •Sold in pairs •Made in the U.S.A.

AFTERBURNER EXHAUST TIPS •Afterburners are replacement lighted muffler tips with a three function red, run & brake, and amber turn signal function •Comes complete with plug-in wire harness •These lights have been heat tested to 450 degrees •Available for most 31/2” & 4” mufflers •Available in chrome or ceramic black •Patent pending •Sold in pairs NOTE: The 31/2” mufflers require an inside diameter of 3.660” NOTE: The 4” mufflers require an inside diameter of 3.8650” PART # DESCRIPTION FOR ALL MODELS WITH 8-PIN TAIL LIGHT PLUG 1802-0262 31/2” chrome 1802-0263 31/2” ceramic black 1802-0264 4” chrome 1802-0265 4” ceramic black FOR 11-13 FLHX/FLTRX WITH MOLEX CONNECTOR 1802-0266 31/2” chrome 1802-0267 31/2” ceramic black 1802-0268 4” chrome 1802-0269 4” ceramic black

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT OEM-STYLE MUFFLERS 1861-0767 Flame $149.95 1681-0768 Gun 149.95 1861-0769 Serrated 149.95 FOR RINEHART 3.5” DIA. MUFFLERS 1861-0795 Flame 149.95 1861-0796 Drilled 149.95 1861-0797 Slashed 149.95 FOR 4” VANCE & HINES MONSTER ROUND AND 4” RINEHART MUFFLERS 1861-0798 Flame 149.95 1861-0799 Drilled 149.95 1861-0800 Slashed 149.95 FOR VANCE & HINES TWIN SLASH ROUND MUFFLERS 1861-0801 Flame 149.95 1861-0802 Drilled 149.95 1861-0803 Slashed 149.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

1861-0731

TOURING

HEAT SHIELDS •Fit most aftermarket 13/4” staggered dual pipes (rigid or rubber mount) •Design allows installation of clean chrome pipe covers without cutouts for crossover tube •Sold in pairs PART # DS-203083

1861-0732

AUDIO & COMMUNICATION LUGGAGE

DESCRIPTION For 80” Evolution (except Dyna Glide); repl. OEM #s 65702-86, 65732-86

SUG. RETAIL $67.95

SEATS & SISSY BARS

SKULL HEAT SHIELDS •Available in chrome or satin black •9” long; includes two mounting clamps •Available for 21/4” and 13/4” outside diameter pipes •Sold each PART # FOR 21/4” PIPES 1861-0731 1861-0732 FOR 13/4” PIPES 1861-0782 1861-0783

FLAMING SKULL HEAT SHIELDS •Measure 10” in length •Chrome-plated finish •Universal fit for 2” – 21/4” exhaust pipes •Sold in pairs; clamps included •Made in the U.S.A. PART # 1861-0102

DESCRIPTION

EXHAUST SUG. RETAIL

Satin black Chrome

$23.95 23.95

FUEL/AIR SYSTEMS

Chrome Satin black

23.95 23.95

ENGINE TRANSMISSION & DRIVELINE

DESCRIPTION Flaming skull heat shields

SUG. RETAIL $79.95

GASKETS & SEALS RIGHT-SIDE CHROME HEAT SHIELD FOR DRESSERS •22” chrome lower right side heat shield fits 87-91 FLT, FLHT and FLHS models with stock exhaust systems •Complete with hardware PART # DS-203086

Before

DESCRIPTION For 87-91 FLT, FLHT and FLHS

SUG. RETAIL $30.95

DS-203072

HANDLEBARS, CONTROLS & MIRRORS CABLES

BRIDGE THE GAP •Takes the blues away •Integrates easily and seamlessly to remove the gap between the stock heat shields •For use with stock head pipes and stock heat shields DESCRIPTION For 93-08 Dresser and Road King models

BRAKES SUG. RETAIL $39.95

TANKS & OIL FILTERS

DS-203073

DASHES & GAUGES

UNIVERSAL HEAT SHIELDS •Chrome universal heat shields available for 13/4”, 2” or 21/4” pipes •Include mounting clamps •Sold each •Made in the U.S.A.

UNIVERSAL HEAT SHIELDS •High-quality heat shields look great and keep you cool •Heat shields are a full 7” in length and come in three sizes to fit most pipes •Shields are triple chrome-plated and highly polished for a non-blueing look for years to come •Come complete with clamps for mounting •Sold each •Made in the U.S.A. PART # 990155 990165 990175

LIGHTING

After

DS-203071

PART # 1861-0150

ELECTRICAL

DESCRIPTION 13/4” heat shield 2” heat shield 21/4” heat shield

990165

SUG. RETAIL $19.95 19.95 19.95

PART # FOR 21/4” PIPES DS-203106 DS-203107 FOR 2” PIPES DS-203074 DS-203103 FOR 13/4” PIPES DS-203071 DS-203072 DS-203073

DESCRIPTION

FRAMES, SUSPENSION & FENDERS SUG. RETAIL

4” straight chrome 10” straight chrome

$29.95 59.95

10” straight chrome 4” straight chrome

47.95 29.95

10” straight chrome 12” straight chrome 18” straight chrome

47.95 47.95 59.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

469

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

OPTIONAL COMPONENTS FOR PRO PIPE HI-OUTPUT

1861-0616

•Optional quiet insert or heat shields are available as listed •Made in the U.S.A. PART # 1861-0606 1861-0613

1861-0617

1861-0606

DESCRIPTION SUG. RETAIL Opt. quiet insert (requires baffle mods) (ea.) $28.95 Opt. heat shields for PART #1800-1213, 1800-1018 (set) 169.95

PART # 1861-0616 1861-0617

DESCRIPTION Opt. heat shields for PART #1800-1016 (set) Opt. heat shields for PART #1800-1021 (set)

SUG. RETAIL $169.95 169.95

MUFFLER ADAPTER •Fits between the stock collector headpipe on 2010 FLHX/FLTRX with stock OEM 2-into-1 systems and the muffler •Allows the use of most 95-13 bagger mufflers with standard 13/4” inlet to be used with 2-in-1 H-D headpipe •Includes the swedged pipe, heat shield and mounting hardware •Heavy-duty 16-gauge steel; pipe is chrome and PART # heatshield is polished and chrome plated 1802-0119 •Made in the U.S.A.

DESCRIPTION Muffler adapter

SUG. RETAIL $50.95

1861-0049

FUEL/AIR SYSTEMS

HS-37

HS-38

HS-15X

HEAT SHIELDS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

470

•Chrome heat shields with no cutouts designed to fit Cycle Shack exhaust systems noted •Easily installed with supplied hose clamps •Sold each •Made in the U.S.A.

HS-14X 1861-0053

1861-0050

PART # DESCRIPTION SUG. RETAIL FITS MHD138 AND MHD338 SERIES MUFFLERS ON 00-06 FLSTF/FXSTD HS-37 Front muffler inlet heat shield $57.95 HS-38 Rear muffler inlet heat shield 72.95 PART # DESCRIPTION FITS CYCLE SHACK 13/4” AND 2” M-PIPES AND DRAG PIPES ON 84-06 FXST/FLST MODELS (EXC. FLSTS) HS-14X Front heat shield, 13/4” pipes (23”) HS-15X Rear heat shield, 13/4” pipes (231/2”) 1861-0049 Front heat shield, 13/4” pipes (14”) 1861-0050 Rear heat shield, 13/4” pipes (18”) 1861-0052 Front heat shield, 2” pipes 1861-0053 Rear heat shield, 2” pipes

1861-0046

HS-216

SUG. RETAIL

$77.95 79.95 50.95 52.95 68.95 67.95

1861-0052

HS-217

HS-17

SUG. RETAIL $59.95 59.95 66.95 66.95

1861-0048

UNIVERSAL HEAT SHIELDS •Chrome heat shield designed for 13/4” universal applications •Includes hose clamps •Sold each •Made in the U.S.A.

HS-16

PART # DESCRIPTION FITS PHD-102 AND 116 SERIES EXHAUST ON 86-03 XL HS-16 13/4” front heat shield HS-17 13/4” rear heat shield FITS PHD-202 AND 216 SERIES EXHAUST ON 86-03 XL HS-216 2” front heat shield HS-217 2” rear heat shield

REPLACEMENT COMPONENTS •For use with Vance & Hines’ exhaust systems PART # 1861-0046 1861-0048

DESCRIPTION Universal 7” heat shield Universal 11” heat shield

SUG. RETAIL $46.95 56.95

PART # V22533 1860-0547

DESCRIPTION Allen cap screw kit Dog Bone nut plate

V22533 SUG. RETAIL $1.95 9.95

1860-0547

EXHAUST BAFFLE FOR 13/4” O.D. EXHAUST PIPES •Fiberglass-wrapped steel construction •8” L ; 1.615” o.d./.840” i.d. •Sold each PART # 1861-0739

DESCRIPTION Baffle

SUG. RETAIL $11.95

DS-202011

•Steel baffle for 13/4” drag pipes •Sold each

HP-PLUS® DRAG PIPE BAFFLES •Dampen sound without impeding flow-through performance •All steel construction; baffles feature patented HP-Plus® design •Install easily on 13/4” or 2”, 16- or 18-gauge drag pipes •Baffles held by 1/4”-20 screws and locking nuts •Sold in pairs or each •Made in the U.S.A. PART # DS-202011 DS-202012 DS-202032

DESCRIPTION 13/4” (ea.) 13/4” (pr.) 2” (pr.)

REPLACEMENT BAFFLE FOR DRAG SPECIALTIES EXHAUSTS

SUG. RETAIL $26.95 49.95 49.95

PART # DS-202019

DESCRIPTION Baffle

REPLACEMENT END CAP O-RING FOR 2-INTO-1 CLASSIC SYSTEMS PART # V22897

DESCRIPTION Repl. end-cap O-ring (ea.)

SUG. RETAIL $7.95

V22897 SUG. RETAIL $7.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

SS-1S 1526

TOURING

DS-209091 1524

1861-0467

1861-0466

AUDIO & COMMUNICATION

SILENCER INSERTS

1861-0465

•Available in two sizes to fit either 13/4” or 2” pipe •Sold each •Made in the U.S.A. PART #

DESCRIPTION

1526

Silencer insert for all 2” drag pipes (except Python®) (ea.)

1524

Silencer insert for all 13/4” drag pipes (ea.)

16.95

SS-1S

Silencer for 13/4” slash-cut M-Pipes (ea.)

23.95

DS-209091

1861-0469

1861-0468

SUG. RETAIL

•High-quality steel performance baffles for 07-08 H-D Screamin’ Eagle™ mufflers •Improves the power and sound of your bike •Sold in pairs •Made in the U.S.A. NOTE: Not for use with 08 California catalyst equipped mufflers.

XP performance silencer for 2 /2” slash style mufflers

23.95

DESCRIPTION

SIZE

1861-0465

Fits OEM #80494-07, 80495-07, 80496-07, 80497-07, 80500-07, 80501-07

17/8” x 175/8”

SUG. RETAIL

1861-0466

Fits OEM #80502-07

17/8” x 13”

1861-0467

Fits OEM #64985-07A, 65467-05

2” x 261/4”

57.95

1861-0468

Fits OEM #80492-07, 80493-07, 80503-07

17/8” x 157/8”

39.95

1861-0469

Fits OEM#80490-07, 80491-07, 80498-07, 80499-07

2” x 263/8”

46.95

BAFFLES ONLY

1861-0623

Fits OEM #80674-08

17/8” x 221/4”

41.95

PART #

$41.95 41.95

DESCRIPTION

24” Baffles

1860-0245

REPLACEMENT/OPTIONAL BAFFLES •Available in standard replacement or Quiet Core (reduced dB cores) •Sold each EXHAUST PART #

REPL. BAFFLE PART #

QUIET CORE BAFFLE PART #

EXHAUST PART #

1800-0199

1861-0405

1800-0025

1861-0403

1861-0404

1800-0411

1861-0405

1800-0409

1861-0403

1861-0404

1800-0198

1861-0405

1800-0026

1861-0403

1861-0404

1800-0807

1861-0405

1800-0806

1861-0403

1861-0404

1800-0200

1861-0405

1800-0210

1861-0405

1861-0406

1800-0412

1861-0405

1800-0410

1861-0405

1861-0406

DRAGSTERS

REPL. BAFFLE PART #

QUIET CORE BAFFLE PART #

SUG. RETAIL

1860-0468

SPEEDSTER SHORTS

SPEEDSTER XTRA LONGS

SPEEDSTER SLASH-DOWNS

1861-0408

1800-0087

1861-0403

1861-0404

1800-0416

1861-0408

1800-0413

1861-0403

1861-0404

1800-0088

1861-0403

1861-0404

SPEEDSTER LONGS 1800-0027

1861-0407

1861-0408

1800-0808

1861-0403

1861-0404

1800-0415

1861-0407

1861-0408

1800-0212

1861-0403

1861-0404

1800-0028

1861-0407

1861-0408

1800-0414

1861-0403

1861-0404

1800-0809

1861-0407

1861-0408

1800-0761

1861-0405

1861-0406

EXHAUST PART #

REPL. BAFFLE PART #

EXHAUST PART #

REPL. BAFFLE PART #

REDUCED DB BAFFLE PART #

3 /2” SLIP-ONS 1801-0366

1861-0575

1.0” dia.

1860-0611

1.25” dia.

20.95

1860-0238

1.5” dia.

21.95

1860-0614

1.625” dia.

23.95

1860-0461

1.75” dia.

24.95

1860-0239

2.0” dia.

26.95

1860-0240

2.5” dia.

39.95

BAFFLE W/ PACKING

1860-0617

3.0” dia.

43.95

PART #

1.0” dia.

39.95

1860-0463

1.0” dia.

1860-0613

1.25” dia.

38.95

1860-0612

1.25” dia.

34.95

1860-0242

1.5” dia.

39.95

1860-0464

1.5” dia.

32.95

1860-0616

1.625” dia.

44.95

1860-0615

1.625” dia.

36.95

1860-0462

1.75” dia.

47.95

1860-0465

1.75” dia.

36.95

1860-0243

2.0” dia.

49.95

1860-0466

2.0” dia.

36.95

1860-0244

2.5” dia.

79.95

1860-0467

2.5” dia.

49.95

1860-0619

3.0” dia.

84.95

1860-0618

3.0” dia.

57.95

$32.95

1801-0362

1861-0576

1861-0579

1861-0576

1861-0579

1801-0363

1861-0576

1861-0579

1861-0576

1861-0579

1801-0364

1861-0576

1861-0579

1801-0361

1861-0576

1861-0579

1801-0365

1861-0577

1861-0580

PRICE LIST SUG. RETAIL

19.95

DS-202169

1860-0468

10” x 12” sheet

DS-202187

DS-202154

DS-200030

BRAKES

DS-210630

Repl. baffle 17/8” x 103/4”

1861-0404

Quiet Core baffle repl. 85/8” for 15” bodies

34.95

1861-0405

Repl. baffle 17/8” x 141/2”

29.95

PART #

DESCRIPTION

1861-0406

Quiet Core baffle repl. 123/8” for 191/2” bodies

34.95

DS-202154

13/4” o.d. x 11/2” i.d. for 17/8” pipes

Quiet Core baffle 16 /4” for 24” bodies

DS-200029

DS-210631

NOTE: May not fit other styles of exhaust systems because of various wall thicknesses used.

SUG. RETAIL $39.95

29.95

DS-202169

1 /8” o.d. x 1 /4” i.d. for 2” pipes

39.95

34.95

DS-200030

21/8” o.d. x 13/4” i.d. for 21/4” pipes

39.95

DS-202187

15/8” o.d. x 11/2” i.d. for 13/4” pipes

39.95 39.95

1861-0575

Repl. baffle 2” x 15”

34.95

1861-0576

Repl. baffle 2” x 161/2”

34.95

DS-200029

21/8” o.d. x 2” i.d. for 21/4” pipes

1861-0577

Repl. baffle 2” x 231/2”

34.95

DS-200492

23/8” o.d. x 13/4” i.d. for Samson Cannons, Long Cannons and Long Slashers for 02-06 V-Rod

39.95

1861-0578

Reduced dB baffle 13/4” x 151/2”

34.95

1861-0579

Reduced dB baffle 13/4” x 17”

34.95

DS-210630

21/8” o.d. x 13/4” i.d. x 37/8” baffle (ea.) for original Samson Big Guns

34.95

1861-0580

Reduced dB baffle 13/4” x 24”

34.95

DS-210631

21/8” o.d. x 2” i.d. x 4” baffle (ea.) for original Samson Big Guns

34.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

•Replacement 10” baffles for Samson exhaust systems •Sold each •Made in the U.S.A.

DESCRIPTION

Repl. baffle 1 /8” x 19”

CABLES

6.95

BAFFLES

1861-0403

HANDLEBARS, CONTROLS & MIRRORS

TANKS & OIL FILTERS

PART #

$29.95

LIGHTING

MUFFLER PACKING ONLY

6” x 10”

3 /2” SLIP-ONS (CONT)

1801-0359

1861-0408

SUG. RETAIL

REDUCED DB BAFFLE PART #

1801-0360

1861-0407

DESCRIPTION

1801-0578

GASKETS & SEALS ELECTRICAL

1860-0241

1860-0245

ENGINE

24” LONG BAFFLES

PERFORATED SHEET

1800-0195

1860-0463

1860-0237

48” LONG BAFFLES

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

24” LONG BAFFLES $21.95

SEATS & SISSY BARS EXHAUST

•Ideal for replacing rusted-out exhaust baffles •Work great for custom fabrication as well •1.0”, 1.5”, 1.625”, 1.75” and 2.0” o.d. tubing is 22-gauge stainless steel •All have 1/8” diameter holes, 3/16” staggered centers, 33 holes per square inch and 40% open area •2.5” and 3.0” o.d. tubing is 16-gauge stainless steel; perforated sheet is 20-gauge stainless steel •Sold each •Made in the U.S.A.

PART #

LUGGAGE

$16.95

UNIVERSAL BAFFLES

BAFFLES FOR H-D SCREAMIN’ EAGLE™

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

471

SECTION

WINDSHIELDS & FAIRINGS 1861-0770

1861-0400

TOURING

TORQUE CONES AUDIO & COMMUNICATION

TORQUE CONES II

LUGGAGE

•Machined from stainless steel •Feature a better venturi effect than the stamped versions •Offer correct back pressure for more horsepower •Fit most stock and aftermarket 13/4” exhaust systems •Sold in pairs •Made in the U.S.A.

SEATS & SISSY BARS

PART # DS-200203

DESCRIPTION Torque Cones II

SUG. RETAIL $99.95

DS-203014

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

DS-203017

•Heavy-gauge steel construction •Sold each DESCRIPTION 13/4”, Dyna Glide only 13/4”, FXR only 2”, Dyna Glide only 2”, FXR only

SUG. RETAIL $11.95 10.95 10.95 10.95

GASKETS & SEALS

•Used to mount 17/8” diameter pipe extensions that have no brackets •Chrome finish •Sold each •Made in the U.S.A. PART # 1860-0234

DESCRIPTION For L85-12 FLT/FLHT models

SUG. RETAIL $42.95

CABLES

BRAKES TANKS & OIL FILTERS

PART # DESCRIPTION SUG. RETAIL DS-209970 For rubber-mount 84-94, 99 FXR and 91-05 Dyna Glide $16.95

PART # DS-203049 DS-203050 DS-203047 DS-203048 DS-203045 DS-203046

DS-203047

DESCRIPTION 13/4” body clamp 17/8” body clamp 13/4” end clamp 17/8” end clamp 13/4” center clamp 17/8” center clamp

•3” diameter chrome muffler clamp •Sold each •Made in the U.S.A. PART # 1860-0231

DESCRIPTION For 84-E85 5-speed FLT/FLHT models; repl. OEM #s 65837-79/65838-79

$27.95

Body clamp

Center clamp

SUG. RETAIL

End clamp

Double clamp

UNIVERSAL HEAVY-DUTY MOUNTING CLAMPS •Flat, heavy-gauge chrome clamps attach exhaust pipes to any frame-mounted bracket •Each clamp includes nut and bolt •Sold each •Made in the U.S.A.

FOOTRESTS & LICENSE PLATE FRAMES

COVERS, SECURITY & GENERAL

472

SUG. RETAIL $19.95 19.95 19.95 19.95 19.95 19.95

MUFFLER CLAMP

FRAMES, SUSPENSION & FENDERS

HARDWARE, CHEMICALS & TOOLS

DS-203045

DS-203049

DASHES & GAUGES

WHEELS & AXLES

SUG. RETAIL $34.95 51.95

•Relocates rear midway support clamp off rear pipe bend for improved mounting and appearance •Chrome kit includes two 13/4” pipe clamps (one each for the rear and the front) and one mounting hanger bracket •Fits Drag Specialties and other exhaust pipes

•Heavy-gauge flat steel clamps attach exhaust pipes to any frame-mounted bracket •Include nuts and bolts; available in chrome •Sold each •Made in the U.S.A.

PIPE HANGER

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION Torque cones (pr.) Vortex torque cones (pr.)

UNIVERSAL HEAVY-DUTY EXHAUST CLAMPS

ELECTRICAL

LIGHTING

PART # 1861-0400 1861-0770

MIDWAY EXHAUST MOUNTING KIT

MIDWAY DRAG PIPE MOUNT CLAMPS PART # DS-203014 DS-203017 DS-203016 DS-203015

•High-temperature stainless steel cones have fully radiused edges for improved engine response, especially low-end torque •Generate correct levels of backpressure for increased horsepower •Fit most stock and aftermarket exhaust systems; fit 13/4”-2” i.d. exhaust pipes •New Vortex design increases back pressure, improving torque and horsepower •Smooths out the power curve for more consistent performance •Made in the U.S.A.

PIPE SIZE 13/4” 2” 21/2”

MUFFLER CLAMPS FOR DRESSERS •Chrome-plated clamps meet or exceed OEM specifications •Sold in pairs PART # DS-203018

DESCRIPTION For all L85-94 FLT; repl. OEM #65722-85 (pr.)

SUG. RETAIL $23.95

END CLAMP EC-200H EC-212H

PART # BC-200H CC-200H CC-212H

CENTER CLAMP CC-200H CC-212H SUG. RETAIL $11.95 10.95 11.95

BODY CLAMP BC-200H -

PART # EC-200H EC-212H DC-134

DOUBLE CLAMP DC-134 SUG. RETAIL $10.95 11.95 8.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS STAINLESS STEEL EXHAUST CLAMPS

1861-0679

STAINLESS STEEL T-BOLT CLAMPS

•Barrel and band design provide for superior clamping pressure •Low profile hex head adjusting bolt •Holds up to the repeated heating and cooling of the exhaust system •Available in 10 sizes •Sold individually •Made in the U.S.A. PART # 1861-0679 1861-0680 1861-0681 1861-0682 1861-0683

DESCRIPTION 1.44” - 1.58” clamp 1.56” - 1.70” clamp 1.69” - 1.87” clamp 1.81” - 1.99” clamp 1.94” - 2.12” clamp

SUG. RETAIL $11.95 11.95 11.95 11.95 11.95

PART # 1861-0684 1861-0685 1861-0686 1861-0687 1861-0688

DESCRIPTION 2.06” - 2.24” clamp 2.19” - 2.37” clamp 2.31” - 2.49” clamp 2.44” - 2.62” clamp 2.63” - 2.81” clamp

SUG. RETAIL $11.95 11.95 11.95 11.95 11.95

TOURING

•Keep it all together and clean with these heavy-gauge stainless steel clamps, the best in the business •Stainless steel construction resists heat and rust •Sold each •Made in the U.S.A. PART # 094-1500 094-1750 094-2000

SUG. RETAIL $16.95 20.95 20.95

DESCRIPTION 1.50” clamp 1.75” clamp 2” clamp

PART # 094-2250 094-2500 094-2750

DS-203060

AUDIO & COMMUNICATION

DESCRIPTION 2.25” clamp 2.50” clamp 2.75” clamp

SUG. RETAIL $17.95 20.95 16.95

LUGGAGE SEATS & SISSY BARS

DS-203070

EXHAUST DS-203080

EXHAUST OFFSET BRACKET •Chrome universal offset mounting bracket for exhaust pipes, mufflers, etc. •Sold individually •Made in the U.S.A. PART # OC-1

DESCRIPTION Offset bracket

DS-200155

EXHAUST HANGER BRACKETS

SUG. RETAIL $6.95

DS-200156

•Chromed 1/8” thick steel exhaust hangers •Available in assorted lengths and configurations •Sold individually PART # DS-203060 DS-203070 DS-203080

DESCRIPTION Hanger Hanger L-bend hanger

SIZE 3” L 43/4” L 1” x 33/4”

ENGINE SUG. RETAIL $6.95 6.95 6.95

ELECTRICAL

DS-209927

CHROME FXR EXHAUST MOUNTING BRACKETS

LIGHTING

•Replacement chromed steel exhaust brackets •Available for front and rear applications; may also be used on other models •Will work for custom frame applications and 90-92 FXD models •Rear bracket includes spacer (for 90-94 models only)

DS-209936

SUG. RETAIL $16.95 17.95

RUBBER MUFFLER MOUNTS •High-quality replacement component •Sold in pairs PART # 1861-0808

DESCRIPTION For 85-13 FLT/FLHT/FLHR/FLHX and FLTR models; repl. OEM #65724-85

TRANSMISSION & DRIVELINE GASKETS & SEALS

DS-209931

PART # DESCRIPTION FOR ALL 84-94, 99-00 FXR MODELS DS-200155 Front bracket; repl. OEM #65670-82B DS-200156 Rear bracket with spacer; repl. OEM #s 65675-87 and 65802-90

FUEL/AIR SYSTEMS

SUG. RETAIL $6.95

HANDLEBARS, CONTROLS & MIRRORS

DS-209935

REPLACEMENT MUFFLER SUPPORTS

CABLES

•1” o.d. steel tubing available in black powdercoat or highly polished chrome •Made in the U.S.A. PART # DESCRIPTION FOR 84-94 FXST AND FLST (EXCEPT FLSTF AND FLSTN), 84-86 FXWG AND 85 FXSB DS-209931 Black; repl. OEM #65459-84A FOR 87-94 FXR DS-209927 Chrome; repl. OEM #65674-87 FOR 95-13 DYNA GLIDE MODELS DS-209936 Chrome; repl. OEM #65674-95 1860-0391 Black FOR 91-94 DYNA GLIDE MODELS DS-209935 Black; repl. OEM #65674-90A

SUG. RETAIL

$73.95 46.95 43.95 36.95 36.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

MUFFLER BRACKET COVERS •Cover the welded muffler mounting brackets beneath the saddlebags with smooth chrome •Stamped steel construction with a chrome finish •Sold in pairs PART # 1861-0811

DESCRIPTION For 95-13 FLT/FLHT/FLHR/FLTR/FLHX w/ 4” round mufflers

SUG. RETAIL $39.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

473

SECTION

WINDSHIELDS & FAIRINGS

BK-74

BP-1

EXHAUST FLANGE KIT TOURING AUDIO & COMMUNICATION LUGGAGE

•Kit includes two chrome flanges with retaining clips •Retaining rings can be purchased separately

DS-203097

PART # DESCRIPTION FOR 84-13 BIG TWINS AND 86-13 XL DS-203097 Exhaust flange kit; repl. OEM #s 65328-83, 65325-83 1861-0458 Exhaust retaining clips (Genuine James); repl. OEM #65325-83A DS-203109 Exhaust retaining clips; repl. OEM #65325-83 (10-pk.)

SUG. RETAIL

PIPE ACCESSORIES

TB-2

•Made in the U.S.A. $25.95 1.95 (pr.) 2.95 (ea.)

PART # BP-1 BK-74 TB-2 TB-4

DESCRIPTION Brake pedal stop for 86-E87 XL 12” mounting straps for Harley 74” w/ mtg. studs (not for use w/ adjustable channel-mount pipes) (pr.) Two-piece T-bolt set Four-piece T-bolt set

SUG. RETAIL $6.95 19.95 5.95 11.95

SEATS & SISSY BARS EXHAUST STUDS EXHAUST FUEL/AIR SYSTEMS

•Sold in pack of six •Made in the U.S.A. PART # DS-197019

GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL $9.95

1861-0669

ENGINE TRANSMISSION & DRIVELINE

DESCRIPTION For all 84-13 Big Twin and 86-13 XL models; repl. OEM #16715-83

1861-0667

•Kit includes four zinc-plated studs and four chrome-plated flanged nuts; replaces OEM #16715-83 •Made in the U.S.A. PART # 2401-0126

DESCRIPTION For 84-13 Big Twin, 86-13 XL

SUG. RETAIL $13.95

EXHAUST PORT FASTENER KIT

1861-0666 1861-0668

EXHAUST HEAT WRAP KITS •Fiberglass cloth for extreme heat insulation (2,000°) •Perfect for wrapping pipes or mufflers •Keeps the heat inside •Comes in 1” or 2” wide x 25’ rolls •Includes four 14” ball bearing and barb locking stainless steel ties; replacement ties sold separately (PART #1861-0670) •Available in black or tan •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1861-0666 1” tan $31.95 1861-0667 1” black 31.95

EXHAUST PORT STUDS AND NUTS

PART # DESCRIPTION SUG. RETAIL 1861-0668 2” tan $44.95 1861-0669 2” black 44.95

•Never worry about re-tightening exhaust stud nuts again •Kit’s lock nuts fasten onto OEM exhaust studs without damaging studs or flange •No special tools needed for installation or removal •No thread locker required •Made in the U.S.A. PART # 1860-0388

SUG. RETAIL $12.95

MUFFLER PACKING •Heavy-duty 1,200°F muffler packing •11” x 16” x 1” thick •Can be split in half to allow for double use •Made in the U.S.A. PART # 1861-0696

CABLES

DESCRIPTION For 84-99 Evolution Big Twin models

DESCRIPTION Muffler packing

SUG. RETAIL $14.95

BRAKES V16106

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

474

FIBERGLASS PACKING

HEADER WRAP KIT •Kit features laser-cut Vance & Hines wrap clamps, black header wrap tape and locking stainless steel ties •Black, fiberglass composite wrap tape helps lock in the heat and reduces the radiant heat a realistic 50% •Kit includes 25’ roll of black wrap tape, 2 Vance & Hines Wrap Clamps and 6 locking stainless steel ties, enough to wrap two motorcycle headers thoroughly •Made in the U.S.A. IMPORTANT NOTICE: Use of this Vance & Hines Header Wrap Kit (PART #1861-0622) may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases flowing through the head pipe, thereby raising the head pipe temperature beyond its intended operating temperature. Using heat wrap may compromise the integrity of the head pipe material, and may ultimately lead to cracks in the head pipe and will not be covered under warranty. Use of header wrap on an exhaust system is a modification to, and not a normal use of, an exhaust system. This notice is intended to inform the buyer to consider this possibility before using this product. PART # 1861-0622

DESCRIPTION Black exhaust wrap kit

SUG. RETAIL $69.95

•Available in several sizes as listed PART # V16106 V16107 V16108

V16107

DESCRIPTION Fiberglass repacking kit, 20” x 121/2” x 3/8” Fiberglass repacking kit, 12” x 9” x 3/8” Fiberglass repacking kit, 13” x 91/2” x 3/8”

SUG. RETAIL $14.95 14.95 14.95

UNIVERSAL CORE REPACK KITS •High-grade fiberglass matting •Kit PART #1860-0198 includes 9” x 16” fiberglass matting; enough material to repack two baffle cores •Kit PART #1860-0510 includes two 141/2” x 121/2” x 1/2” thick fiberglass mats and two 14” x 81/2” weaved thin mats •Made in the U.S.A. PART # 1860-0198 1860-0510

DESCRIPTION Repack kit (9” x 16”) Repack kit (141/2” x 121/2” and 14” x 81/2”)

SUG. RETAIL $32.95 30.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS 1861-0829

TOURING AUDIO & COMMUNICATION

1861-0828

1861-0817

EXHAUST PIPE WRAP

1861-0816

•For maximum fuel burn or cosmetic upgrade •Withstands direct heat up to 2000°F •Available in several widths and lengths; 1” x 50’ and 2” x 25’ sizes include four silver or black tie wraps as listed •Made in the U.S.A. PART #

DESCRIPTION

SUG. RETAIL

NATURAL

PART #

MATRIX HEAT SHIELD™ EXHAUST WRAPS

1861-0818

DESCRIPTION

•1” and 2” W rolls offer better heat resistance and a custom look you will not find with any other exhaust wrap •Made from crushed volcanic rock; 25% stronger than a typical fiberglass wrap •Weather and chemical resistant •Kit includes four stainless steel tie straps and detailed instructions •The Matrix Heat Shield Mat is a unique selfadhesive heat shield with a carbon-fiber finish

SUG. RETAIL

METALLIC

1861-0542

1” x 50’ w/ silver tie wraps

$49.95

1861-0771

1” x 50’ w/ silver tie wraps

$69.95

1861-0540

2” x 25’ w/ silver tie wraps

39.95

1861-0772

2” x 25’ w/ silver tie wraps

55.95

1861-0544

2” x 50’

53.95

1861-0773

2” x 50’

1861-0546

2” x 100’

96.95

1861-0774

2” x 100’

1861-0818

1” x 50’ w/ black tie wraps

56.95

1861-0778

1” x 50’ w/ silver tie wraps

71.95

1861-0817

2” x 25’ w/ black tie wraps

46.95

1861-0775

2” x 25’ w/ silver tie wraps

68.95

1861-0541

1” x 50’ w/ silver tie wraps

57.95

1861-0776

2” x 50’

1861-0539

2” x 25’ w/ silver tie wraps

45.95

1861-0777

2” x 100’

1861-0543

2” x 50’

1861-0545

2” x 100’

BLACK

78.95 149.95

SILVER

92.95

PART #

DESCRIPTION

1861-0828

Exhaust wrap, 1” x 50’

$54.95

61.95

1861-0829

Exhaust wrap, 2” x 25’

54.95

112.95

1861-0816

Mat, 12” x 24”

39.95

182.95

•Features a narrow design with a low profile head •Secures exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions PART # •Comes in two sizes •Sold in packs of four 1861-0672 1861-0673 •Made in the U.S.A.

1861-0673

PART #

FUEL/AIR SYSTEMS ENGINE

DESCRIPTION

SUG. RETAIL

PART #

GASKETS & SEALS ELECTRICAL

LIGHTING

DESCRIPTION

SUG. RETAIL $59.95

SUG. RETAIL

1861-0318

Black 2” x 25’

$62.95

1861-0730

Tan 1” x 50’

1.25”-2.25” diameter

$13.95

1861-0729

Black 1” x 50’

64.95

1861-0320

Exhaust wrap clamps

2.25”-3.25” diameter

13.95

1861-0319

Tan 2” x 25’

54.95

DESCRIPTION

EXHAUST

TRANSMISSION & DRIVELINE

•Wraps will increase power and reduce radiated exhaust heat •Kits includes 25’ L, 2” W or 50’ L, 1” W top-quality hightemperature wrap and four stainless-steel tie wraps for that finishing touch •Wraps can withstand up to 2,000° 1861-0318 •Available in black or tan •Replacement 4-pack exhaust wrap clamps are also available

1861-0672

SEATS & SISSY BARS

SUG. RETAIL

HIGH-TEMPERATURE EXHAUST WRAP KITS

STAINLESS STEEL WORM CLAMPS

LUGGAGE

19.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

STAINLESS STEEL CABLE TIES

BRAKES

•Great for high-temperature areas •Ball bearing and barb fastening assembly •Locks tightly and will not slip •Secure any place an extra strength tie is needed •Comes in 8” or 14” lengths 1861-0671 •Sold in pack of five •Made in the U.S.A.

O2 SENSOR COVERS

•Chrome O2 sensor covers offer a unique, custom look •Designed to cover the plain 18mm OEM sensors •Install easily with included hardware •Sold in pairs •Made in the U.S.A. PART #

DESCRIPTION

1861-0451

For all OEM 18mm O2 sensors

SUG. RETAIL $69.95

PART #

DESCRIPTION

1861-0671

8”

SUG. RETAIL $9.95

TANKS & OIL FILTERS

1861-0670

PART #

DESCRIPTION

1861-0670

14”

SUG. RETAIL $11.95

STAINLESS STEEL TIE WRAPS •For securing exhaust pipe wrap and cosmetic upgrades •Anti-slip ball bearing locking device •Made in the U.S.A. PART #

DESCRIPTION

SUG. RETAIL

8 INCH, SILVER

PART #

1861-0819 DESCRIPTION

SUG. RETAIL

8 INCH, BLACK

1861-0547

4-pk.

1861-0549

50-pk.

$7.95

1861-0819

4-pk.

1861-0820

50-pk.

$7.95

1861-0823

4-pk.

1.95 (ea.)

1861-0824

50-pk.

14 INCH, BLACK

1861-0548

4-pk.

1861-0550

50-pk.

SUG. RETAIL

8 INCH, BLACK (LADDER STYLE)

1.95 (ea.)

14 INCH, SILVER

DESCRIPTION

$10.95 2.95 (ea.)

14 INCH, BLACK (LADDER STYLE)

8.95

1861-0821

4-pk.

1.95 (ea.)

1861-0822

50-pk.

8.95

1861-0825

4-pk.

2.95 (ea.)

1861-0826

50-pk.

13.95 2.95 (ea.)

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1861-0823 PART #

DASHES & GAUGES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

475

SECTION

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

BRAKES

02 SENSOR BUNG ADAPTER KIT •Reduces 18mm bungs to 12mm for 10‑13model sensors •Includes extension wire to allow the front sensor to reach the new installation location •Kit includes two adapters, extension wire, wire connectors and instructions PART #

DESCRIPTION

1861‑0594

O2 sensor bung adapter kit

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

476

•6” extension harness •Reduces the 18mm O2 bungs on 09 models to 12mm O2 bungs on 10‑13 models •No cutting or splicing required •Made in the U.S.A. SUG. RETAIL $21.95

O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER

PART #

DESCRIPTION

1861‑0827

6” O2 extension harness

SUG. RETAIL $24.95

O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER

•Allows the use of exhaust systems with 18mm O2 sensor bungs to be used with late model bikes with 12mm O2 sensors •Reduces the 18mm O2 bungs to 12mm O2 bungs found on select 10‑13 models •Wiring harness comes pre‑assembled PART # DESCRIPTION with connector pins 1861‑0789 O2 extension harness •Made in the U.S.A.

SUG. RETAIL $24.95

•Now you can use 09 Dresser exhaust pipes on 10‑13 Dresser models •Reduce the 18mm O2 bungs on 09 models to 12mm O2 bungs found on 10‑13 models •Uses Namz simple Plug‑N‑Play wiring harness technology; no cutting PART # DESCRIPTION or splicing required 1861‑0608 O2 extension harness •Made in the U.S.A.

SUG. RETAIL $31.95

O2 SENSOR PLUG

•Works with any O2 sensor port fitting •Two sizes available: 18 x 1.5mm or 12 x 1.25mm •Sold each •Made in the U.S.A. PART #

DESCRIPTION

1861‑0496

18 x 1.5mm

SUG. RETAIL $4.95

O2 WELD‑IN SENSOR BUNGS

1861‑0496

PART #

DESCRIPTION

1861‑0562

12 x 1.25mm

SUG. RETAIL $4.95

O2 SENSOR PORT PLUGS •Allow non‑sensor HD models to run newer‑style exhaust systems equipped with O2 sensor ports •Simply scew it into non‑essential sensor ports •Sold in pairs •Made in the U.S.A.

1861‑0790

PART #

DESCRIPTION

SUG. RETAIL

PART #

DESCRIPTION

SUG. RETAIL

1861‑0790

18mm x 1.5

$11.95

1861‑0791

12mm x 1.25

$11.95

•Threaded outer and inner adapters reduce O2 sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select newer‑model motorcycles PART # DESCRIPTION •Sold in pairs O2 port bushing adaptors •Made in the U.S.A. 1861‑0784

1861‑0464

SUG. RETAIL $11.95

1861‑0607

O2 SENSOR PORT PLUG KIT •Kit allows select pre‑closed‑loop H‑D models to run newer style exhaust systems equipped with O2 sensor ports •Includes two zinc‑plated, plugs with sealing washers •Simply screw into nonessential sensor ports PART #

DESCRIPTION

1861‑0464 1861‑0607

Sensor port plug kit, 18mm x 1.5 Sensor port plug kit, 12mm x 1.25

SUG. RETAIL $16.95 16.95

WELD‑ON EGT BUNG •Allows installation of exhaust gas temperature meter •Sold each PART #

DESCRIPTION

1861‑0525

EGT bushing

1861‑0560

1861‑0694

•Used to install O2 sensors in exhaust systems •Weld‑in style •Available in 12 x 1.25mm or 18 x 1.5mm styles •Available in a standard straight style, or machined at a 45° angle •Sold in pairs •Made in the U.S.A. PART # STRAIGHT 1861‑0560 1861‑0561

DESCRIPTION

SUG. RETAIL

18mm x 1.5 12mm x 1.25

$14.95 14.95

PART # 45° ANGLE 1861‑0694 1861‑0695

DESCRIPTION

SUG. RETAIL

18mm x 1.5 12mm x 1.25

$24.95 24.95

7806‑1563

7806‑1564

WELD NUT FOR EXHAUST SENSOR AND HEX SOCKET PLUG •18 x 1.5mm weld nut for mounting wide‑band sensor on exhaust pipe •18 x 1.5mm hex socket plug mates with 18 x 1.5mm weld nut; allows removing oxygen sensor

O2 PORT BUSHING ADAPTER

TANKS & OIL FILTERS DASHES & GAUGES

O2 SENSOR HARNESS EXTENSION

SUG. RETAIL $21.95

PART #

DESCRIPTION

7806‑1563 7806‑1564 1861‑0831 1861‑0833 1861‑0832

18x1.5mm weld nut 18x1.5mm hex socket plug 18 x 1.5 mm stainless steel weld nut 18 x 1.5mm stainless steel hex socket plug 12 x 1.25mm hex socket plug

SUG, RETAIL $5.95 5.95 8.95 8.95 5.95

O2 SENSOR PORT PLUG KIT •Plugs SuperTrapp O2 sensor ports when using exhaust on earlier H‑D models that don’t require an O2 sensor •Kit includes two 18 x 1.5mm plugs •Made in the U.S.A. PART #

DESCRIPTION

1860‑0144

For all SuperTrapp exhaust w/ O2 sensor ports

PRICE $32.95

O2 SENSOR BUNG, PLUG AND WASHER •Available as a kit or individually •Weld‑in O2 sensor bung allows installation of 1861‑0728 O2 sensors in most exhaust systems; 18mm x 1.5 •O2 sensor bung plug works with 18mm O2 sensor bungs; 18mm x 1.5 •Aluminum bung plug washer fits any 18mm O2 sensor bung plug PART #

DESCRIPTION

1861‑0728 1861‑0523 1861‑0522 1860‑0545

O2 sensor bung, plug and washer kit Weld‑in O2 sensor bung O2 sensor bung plug Aluminum washer for O2 sensor plug

SUG. RETAIL $18.95 9.95 8.95 2.45

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel‑injected models. See Section 7.

SEE PAGE 335 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

Commander un accessoire ou une pièce chez US Dream Import Vous avez vu une pièce ou un accessoire : -1) Notez [Nom du catalogue] [Page du catalogue] [Référence article] et [Nom de l'article (en anglais ou en français)], -2) Envoyez-moi un E-Mail avec ces informations à info@usdream.fr en précisant dans l'objet : "Date + Devis + [Référence article] + [Nom de l'article (en anglais ou en français)] et éventuellement votre numéro de téléphone de contact" Un E-Mail vous sera adressé sous 24 h avec la disponibilité de l'article, le prix(*) livré chez vous et un lien de paiement direct, Vous n'avez plus qu'à procéder au règlement et la commande de votre accessoire sera effectuée immédiatement,

Et votre Accessoire sera chez vous dans 6 jours ! (*) Le prix du devis peut être inférieur au prix que vous avez vu, Exemple : votre accessoire est vendu 157,99 USD sur un eBook et est disponible à 103,99 USD sur un autre FlipBook de US Dream Import - Le devis envoyé sera toujours au meilleur prix disponible ! (*) Par un procédé de croisement des références disponibles, Pour information les prix indiqués sur les catalogues US sont toujours HT et compte tenu des frais de transport par avion, pour 103,99 USD sur un catalogue US vous payerez environ le même montant HT, soit 105,00 Euros (HT) + TVA (20%) + Tarif poste en France,

US Dream Import spécialiste importation de pièces et accessoires

USA Import en direct des USA depuis 1992

Contents Bibliotheque FlipBook Drag Specialties FatBook 2013 Drag Specialties FatBook 2013 Update

Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr

Windshields.........................................................6-48.. Touring...............................................................49-86 Audio.................................................................87-122... luggAge..........................................................123-195.... seATs.&.sissybArs.........................................196-334.... exhAusT...........................................................335-476..... Fuel/Air.sysTems..........................................477-555..... engine.............................................................556-629.... TrAnsmission.&.driveline..........................630-714... gAskeTs.&.seAls.............................................715-742..... elecTricAl......................................................743-813..... lighTing...........................................................814-897.... hAndlebArs,conTrols.&.mirrors.........898-1003.... cAbles.........................................................1004-1055.... brAkes.........................................................1056-1128..... TAnks.&.oil.FilTers...................................1129-1172...... dAshes.&.gAuges......................................1173-1206...... FrAmes,.suspension.&.Fenders...........1207-1285.... FooTresTs.&.license.plATe.FrAmes.....1286-1352.... Wheels.&.Axles.........................................1353-1383. hArdWAre,.chemicAls.&.Tools.............1384-1504 covers,.securiTy.&.generAl.................1505-1560...... cross.reFerence.chArT........................1561-1578... Quick.reFerence.chArT.........................1579-1581.... index............................................................1582-1618

NOUVEAU : Special Up Date 2013 FatBook Drag Specialties Harley-Davidson

CLIQUEZ ICI Pièces et Accessoires dédié Harley-Davidson Importés par US Dream Import en France

NOTE:

for your tire needs please see our all-new

TIRE CATALOG. It’s packed with all the tires, tubes, tools and accessories from the industry’s top vendors. We’ve pulled it all out of our other catalogs and dedicated an entire catalog to nothing but tires. No more switching between catalogs — THE TIRE CATALOG HAS IT ALL.

FUEL/AIR SYSTEMS

477