Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr
TANKS & OIL FILTERS
16
1129
SECTION
16
WINDSHIELDS & FAIRINGS 0701‑0126 Side profile
TOURING AUDIO & COMMUNICATION
0701‑0527
LUGGAGE SEATS & SISSY BARS EXHAUST
0701‑0126
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
GAS TANKS FOR DRESSERS •Now available in 171/2”, 20” or 201/2” widths 0701‑0127 •One‑piece tanks feature a 3” stretch 0701‑0127 •Curved bottom for a custom look Side profile •Include a raw dash panel that replaces the existing dash •Factory‑sealed powder‑coat primer on the inside of tanks •Accept L96‑13 vented gas caps (sold separately); 03‑13 style fuel‑injected tanks accepts the stock OEM fuel‑pump assembly •96‑06 style carb tanks include a filler plate/neck assembly •Tanks have an approximate 6‑gallon capacity •Tanks fit with RWD Profile (PART #0804‑0247), ProTour (PART #0804‑0248) and LoPro (PART #0801‑0508) seats, sold separately; see page 223 •Made in the U.S.A. NOTE: Filler plate on carb tanks may require modifications to reinstall early‑style sending unit.
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
PART # DESCRIPTION SUG. RETAIL FOR 08‑13 FLHT/ FLHTC/FLHTCU/FLHX/FLTR/H‑D FL TRIKE MODELS 0701‑0526 08‑13 style fuel‑injected gas tank (20”) $1,359.95 0701‑0527 08‑13 style fuel‑injected gas tank (171/2”) 1,359.95 FOR 96‑07 FLHT/FLHX/FLTR MODELS 0701‑0126 03‑07 style fuel‑injected gas tank (201/2”) 1,270.95 0701‑0127 96‑06 style carb gas tank (201/2”) 1,320.95
PART # DESCRIPTION FOR 96‑07 FLHT/FLHX/FLTR MODELS (CONT) 0701‑0318 03‑07 style fuel‑injected gas tank (171/2”) 0701‑0319 96‑06 style carb gas tank (171/2”) FOR 96‑07 FLHR MODELS 0701‑0189 03‑07 style fuel‑injected gas tank (201/2”) 0701‑0320 03‑07 style fuel‑injected gas tank (171/2”)
SUG. RETAIL $1,270.95 1,320.95 1,320.95 1,320.95
0701‑0110 Side profile
1914‑0009
BRAKES 0701‑0110
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
1914‑0009
SMOOTH‑TOP GAS TANKS •Custom tanks for custom builders •One‑piece, single‑cap design •Smooth top eliminates the dash completely •Handcrafted from 14‑ and 16‑gauge steel •Require the use of an L96‑13 vented gas cap and 22mm petcock •Required mount kits may be used on any custom application •Made in the U.S.A.
0704‑0001 0704‑0002
NOTE: Not for use on fuel‑injected models.
HARDWARE, CHEMICALS & TOOLS
PART # DESCRIPTION CUSTOM TANKS FOR 00‑06 SOFTAIL 1914‑00091 211/4” L x 151/2” W, (approx. 4.5 gal.) CHOPPER‑STYLE TANKS 0701‑0110 Short, curved bottom, 233/4” L x 121/2” W
COVERS, SECURITY & GENERAL
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure‑tested and sealed BEFORE being painted to eliminate potential problems.
1130
SUG. RETAIL $859.95 1,020.95
PART # TANK MOUNTS 0704‑0001 0704‑0002 1
DESCRIPTION Frame mount kit Recessed mount kit
SUG. RETAIL $39.95 71.95
Requires the relocation of gauges, indicator lights and ignition switch; FXSTD will require the use of a custom seat.
All part numbers in BLUE are new for 2013.
SECTION
16
WINDSHIELDS & FAIRINGS TOURING ONE-PIECE 2.5” EXTENDED GAS TANKS •Powder-coated on the inside to form a complete seal •Uses stock dash •Accept any L96-13 vented aftermarket cap •A new seat or seat nose modification is required •Measures 231/2” L x 171/4” H x 9” W (approximately 5.5 gal.) PART # •Bungs not included 0701-0434 •Made in the U.S.A. NOTE: Mounting hardware not included.
0701-0435
AUDIO & COMMUNICATION
0701-0434
DESCRIPTION For 01-07 Softail models w/ fuel injection For 00-06 Softail models w/ carb
LUGGAGE
SUG. RETAIL $1,071.95 1,071.95
SEATS & SISSY BARS
0701-0381
EXHAUST
0502-0256
FUEL/AIR SYSTEMS
“Gas It” fuel injection kit
ENGINE
0701-0382
0701-0315
VINTAGE GAS TANKS
•Add a period-style bobber tank to your Softail •Steel gas tank inspired by the Softail conversion Roland Sands Designs created and dubbed El Borracho •Available for carbureted or fuel-injected models •Fuel-injected tank includes RSD “Gas It” fuel injection kit that installs with simple hand tools and no fabrication is required •Tanks rest on a clever steel backbone cover that hides the OEM wiring and holds stock ignition switch to deliver a clean look •Hold three gallons of fuel •Roland Sands Design gas caps sold separately; see page 1142 •Matching seat kit, rear fender kit and handlebars also sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 01-10 SOFTAIL MODELS W/ FUEL INJECTION 0701-0382 Gas tank kit (tank and cover, with “Gas It” kit) FOR 00-06 SOFTAIL W/ CARB 0701-0381 Gas tank kit (tank and cover)
SUG. RETAIL $1,761.95
PART # DESCRIPTION FOR 00-06 SOFTAIL W/ CARB (CONT) 0701-0315 Gas tank only 0502-0256 Backbone cover only
TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $1,099.95 246.95
1,199.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
0701-0183
0701-0184
0701-0185
BRAKES TANKS & OIL FILTERS
CUSTOM GAS TANKS •Narrow Mustang type features a single cap, two petcock outlets, straight mounting tabs and a hole-to-hole center line on mounting brackets of 171/2” •Extra Wide Mustang type features a high tunnel for the “Fatbob” look, one left side petcock outlet and a hole-to-hole center line on mounting brackets of 1711/16” •1-Piece Fatbob style features a left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 193/4” •Dished tank style features a bung for cam-style gas cap, a bung for late-model 22mm petcock and a hole-to-hole center line on mounting brackets of 163/4” •Made in the U.S.A.
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
NOTE: Not for use on fuel-injected models. NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. NOTE: All tanks are pressure-tested and are bare metal; fit before painting. PART # DESCRIPTION NARROW MUSTANG TYPE (161/2” L X 9” W X 7” D; TUNNEL MEASURES 21/2” W X 21/4” D) 0701-0183 2.2 gal. tank EXTRA WIDE MUSTANG TYPE (161/2” L X 12” W X 7” D; TUNNEL MEASURES 21/2” W X 5” D) 0701-0184 3 gal. tank
SUG. RETAIL
$174.95
174.95
0701-0523
PART # DESCRIPTION SUG. RETAIL 1-PIECE FATBOB STYLE (191/2” L X 13” W X 8” D; TUNNEL MEASURES 23/16” W X 41/4” D) 0701-01851 4.75 gal. tank $193.95 DISHED STYLE (16” L X 10” W X 9” D; TUNNEL MEASURES 3” W X 21/2” D) 0701-0523 3 gal. tank 399.95 1
Will not work on any stock FXR or FLT style frames.
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1131
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
0701-0167
1914-1813
1914-1863
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
0701-0167 Side profile 1914-1863
ONE-PIECE TANKS
Side profile •5.1-gallon tank is made from 16-gauge stamped steel •Available in standard or 2” extended length •Dash-style tank has mounting provisions for stock-style dash and ignition switch (not included) •Tank with fuel gauge bungs accepts OEM-style or aftermarket fuel gauges •Aero tank includes gas caps; screw-in cap tank requires the use of 82-E96 gas caps (sold separately)
1914-1813 Side profile
NOTE: Seat nose may require modification to fit properly with extended tanks. Some models may require sending unit modification. PART # DESCRIPTION SUG. RETAIL FOR 01-06 FXST, FLST W/ FUEL INJECTION AND 04-06 FXST, FLST W/ CARB (EXCEPT FXSTD) 1914-18611 Dash style w/ fuel gauge bung, single screw-in cap $399.95 0701-01671, 2 2” extended w/ one screw bung and dummy bung for OEM gas gauge 409.95 1914-18631 2” extended dash style, dual screw-in caps 459.95 1 1914-1864 2” extended dash stye with fuel gauge bung, single screw-in cap 459.95
PART # DESCRIPTION FOR 00-03 FXST, FLST W/ CARB (EXCEPT FXSTD) 1914-1813 Dash style w/ fuel gauge bung, screw-in cap 1914-1814 2” extended dash style w/ fuel gauge bung, single screw-in cap 1
2
SUG. RETAIL $379.95 449.95
Requires the use of petcock adapter OEM #62842-00 or Drag PART #0705-0024 when used in listed carb applications. Will not fit EFI models.
MUSTANG GAS TANK •Fat Bob-style custom application, low-tunnel tank holds approximately 3.3 gallons •Features a 3/8” NPT-style petcock mount with two 1/4” NPT crossover fittings •Available as a single-cap design •Accept 82-E96 style vented gas caps (unless noted) •Measures 193/4” L (including mounting tabs) x 111/2” W x 71/2” H (approximately)
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
NOTE: Not for use on fuel-injected models.
CABLES
PART # 0701-0001 0701-0010 0701-0657
0701-0657
BRAKES 0701-0001
TANKS & OIL FILTERS DASHES & GAUGES
DESCRIPTION W/ single cap W/ dual cap Ribbed, uses 82-E96 H-D threaded gas cap
SUG. RETAIL $117.95 117.95 144.95
0701-0010 DS-390392
DS-390071 DS-390071 Side profile
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1132
ONE-PIECE EXTENDED GAS TANKS •Smooth-top tanks eliminate the dash completely and will require custom mounting of ignition switch, dash lights and speedometer •Tank measures 221/2” L by 16” W PART # DESCRIPTION •Aero caps are included with tank; screw-in caps are not included and SMOOTH-TOP STYLE TANKS FOR 84-99 FXST, FLST must be purchased separately (use 82-E96 style caps) DS-390071 With single screw-in cap •Includes all necessary hardware NOTE: 96-99 models require the use of pre-96 petcock.
DS-390392
With single Aero cap
SUG. RETAIL $354.95 479.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
SECTION
16
WINDSHIELDS & FAIRINGS 2107-1737
TOURING
2107-1737 Side profile
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
ONE-PIECE 2” EXTENDED GAS TANKS
DS-391335
•Gas tanks are fully functional; no dummy extensions •2” stretch over stock length; capacity is approximately 4.2 gallons •Available in a smooth-top style for use with standard screw-in caps or with locking aero cap •Aero cap included; screw-in gas caps sold separately (use 84-E96 style) •Smooth top tanks require custom gauge mounting •Accept late-style petcock (22mm) •Come complete with all necessary mounting hardware
ENGINE TRANSMISSION & DRIVELINE
NOTE: Seat nose may require modification. PART # FOR 84-94, 99-00 FXR 2107-1737 DS-391335
DESCRIPTION
GASKETS & SEALS
SUG. RETAIL
Single locking Aero cap Dual screw-in caps
$439.95 374.95
ELECTRICAL DS-391291 Side profile
DS-391331 Side profile
LIGHTING HANDLEBARS, CONTROLS & MIRRORS EXTENDED TWO-PIECE FLAT-SIDE GAS TANKS •2” extended tanks are fully functional; no dummy extensions welded to rear of tank •4” extensions comprised of fully functional 2” extended tanks with additional 2” dummy extensions welded to the rear of the gas tanks •Tanks come in a raw finish and accept stock-style speedometer and dash •Contoured to fit around the nose of most seats (some seats may require modification) •Available in 5.2-gallon style for use with standard screw-in caps •Aero caps are included with tank •Screw-in caps are sold separately (use 84-E96 style) •Sold as a set
CABLES
BRAKES DS-391291
DS-391331
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
NOTE: 96-99 models require pre-95 screw-in gas caps and petcock.
WHEELS & AXLES
NOTE: See SEATS & SISSY BARS section for custom seats and seat pans to fit with extended tanks. PART # DESCRIPTION SUG. RETAIL 2” EXTENDED TANKS FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391291 5.2-gal. tank for use w/ dual screw-in caps $369.95
PART # DESCRIPTION SUG. RETAIL 4” EXTENDED TANK FOR 84-99 FXST, FLST, 85-86 FXWG AND FXSB DS-391331 5.2-gal. tank for use w/ dual screw-in caps $424.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1133
SECTION
16 DS-391238 Side profile
WINDSHIELDS & FAIRINGS TOURING
DS-391238
DS-391237 Side profile
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
FAT BOB-STYLE GAS TANKS
EXHAUST
NOTE: Stock dash may need to be shimmed.
FUEL/AIR SYSTEMS
•Distinctive reproduction gas tanks constructed of drawn steel •Manufactured to exact OEM specifications •Use with 84-E96 screw-in caps (sold separately) NOTE: 96-99 models require the use of pre-95 gas caps and petcock. PART # DESCRIPTION FOR 84-99 FXST, FLST, 85-86 FX/FXWG DS-391237 3.5-gal. Flatside tank; repl. OEM #s 61218-85 (right side) and 61426-85 (left side) DS-391238 5-gal. Flatside tank; repl. OEM #s 61211-84A (right side) and 61228-84 (left side) DS-391234 6-gal. Flatside tank
SUG. RETAIL $239.95 239.95 219.95
ENGINE 0701-0660
TRANSMISSION & DRIVELINE GASKETS & SEALS
0701-0186
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
FATBOB GAS TANKS •4.2 gallon tank bolts to stock frame •Comes with mounting kit and hose line fittings •PART #0701-0186 features a left side rear external outlet for stock petcock; PART #0701-0187 features a left side center external outlet for stock petcock •Measures 191/4” L x 141/2” W x 8” D; hole-to-hole center line on mounting brackets measures 145/8” •Made in the U.S.A. NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1134
NOTE: All tanks are pressure-tested and are bare metal; fit before painting. PART # 0701-0187 0701-0186
DESCRIPTION For 95-03 XL models For 86-94 XL models
SUG. RETAIL $419.95 419.95
GAS TANKS FOR SPORTSTER
FRISCOSTYLE GAS TANKS FOR SPORTSTERS •Great looking ‘Old School’ tanks modified to feature very low 11/4” deep tunnels and flat bottoms •Sit up tall on frame backbone for a cool “Frisco-Style” custom look •Made from high-quality 18-gauge AKDQ special deep draw material •Centerline hole-to-hole on mounting brackets: 165/8” •Take all 22mm H-D or aftermarket petcocks and L96-13-style screw-in gas caps •Made in the U.S.A. NOTE: Not for use on fuel-injected models. NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings. NOTE: All tanks are pressure-tested and are bare metal; fit before painting. PART # DESCRIPTION SUG. RETAIL KING TYPE (16” L X 11” W X 8” D; TUNNEL MEASURES 16” L X 21/4” W X 3” D ) 0701-0660 2.9 gal. $199.95 STANDARD TYPE (16” L X 91/4’ W X 8” D; TUNNEL MEASURES 1 1 16” L X 2 /4” W X 2 /2” D) 0701-0661 2.2 gal. 176.95
0701-0700
•Great looking ‘Old School’ tanks •Attach to the stock frame mounting points •Made from high-quality 18-gauge AKDQ special deep draw material •Take all 22mm H-D or aftermarket petcocks and L96-13style screw-in gas caps; tanks for fuel-injected models accept stock OEM fuel pump assembly 0701-0701 •Made in the U.S.A.
0701-0703
NOTE: Paughco recommends all tanks be mounted on leather spacers or bushings.
0701-0704
NOTE: All tanks are pressure-tested and are bare metal; fit before painting. PART # 3.5-GAL. DISHED TANKS 0701-0700 0701-0701 0701-0702
DESCRIPTION For 95-03 XL For 04-06 XL For 07-13 XL w/ EFI
SUG. RETAIL $372.95 399.95 424.95
PART # 2.9-GAL. KING TANKS 0701-0703 0701-0704
DESCRIPTION For 95-03 XL For 04-06 XL
SUG. RETAIL $179.95 219.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
SECTION
16
WINDSHIELDS & FAIRINGS DS-391322
DS-391322 Side profile
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
EXTENDED DASH-STYLE RUBBER-MOUNT QUICKBOB® TANK KITS •Fully functional extended design, 2” longer than a standard Quickbob tank •Allows the lines of the tank to flow into the lines of the seat for a great custom look •Tanks have cutout in rear for seat nose (some seats may need to be modified) •95-03 tank kit includes a three-light dash for use with the OEM electronic speedo (except customs), 6-post Fat Bob ignition switch, ignition switch relocation bracket, coil bracket and screw-in gas caps •86-94 tank kit includes a three-light dash, dash base, 2:1 ratio speedo with trip reset (68-84 style face), rubber dampener, a 6-post Fat Bob ignition switch and screw-in gas caps •All tanks come with necessary mounting brackets •3.9-gallon fuel capacity •Utilizes a 22mm petcock PART # DS-391348 DS-391322
DESCRIPTION For 95-03 XL models (except 1200S model) For 86-94 XL models
EXTENDED SMOOTH-TOP QUICKBOB® RUBBER-MOUNT GAS TANKS
SUG. RETAIL $544.95 579.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
DS-391352
LIGHTING
•Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look •2” longer than a standard QuickBob tank •Available in a single- or dual-gas cap style •Tanks have cutout in rear for seat nose (some seats may need to be shortened) •86-03 tanks feature screw-in bungs (use 82-E96 style caps) •3.9-gallon capacity •Utilize a 22mm petcock •Each tank comes with necessary mounting brackets NOTE: When gas tanks are installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type caps.
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS
DS-391351
DS-390077
NOTE: Will not fit 1200S models. PART # DESCRIPTION FOR 86-03 XL MODELS (REQUIRES PART #DS-390077 IGNITION COIL RELOCATION KIT; SOLD SEPARATELY) DS-391351 Twin-cap style gas tank DS-391352 Single-cap style gas tank DS-390077 Ignition relocation kit
SUG. RETAIL $394.95 394.95 23.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
EXTENDED SMOOTH-TOP GAS TANK •Higher-capacity (approximately 4-gallon) 2” extended tanks •Mounts to stock location; requires use of a custom seat to match rear tank cut-out •Accepts a 22mm petcock and late-style screw-in cap (sold separately) NOTE: Will require a custom seat; stock seat will not fit. PART # 0701-0098
DESCRIPTION For 04-06 XL
SUG. RETAIL $389.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1135
SECTION
16
WINDSHIELDS & FAIRINGS DS-391272 Side profile
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
DS-390396
DS-391272
RUBBER-MOUNT QUICKBOB® GAS TANKS •One-piece 3.6-gallon replicas of the Harley Fat Bob tanks •Available with a complete dash assembly or in a smooth-top design •Each style tank comes with rubber mount brackets and hardware •Speedometer not included, but any of the FL-style speedos (except DS-243870) may be used with DS-391273 tank on 86-94 models only •When ordering speedo, be sure to match existing speedo ratio with the one you’re ordering •PART #DS-391284 mount kit with dash allows the use of the OEM electronic speedometer on 95-03 models (except customs); also includes coil and ignition switch relocation brackets (PART #DS-391273 tank only)
GASKETS & SEALS
NOTE: When this gas tank is installed on 92 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an 84-E96 version of the screw-type caps.
ELECTRICAL
NOTE: Will not fit 1200S models.
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
PART # FOR 86-03 XL DS-390396 DS-391272 DS-391273
DESCRIPTION SUG. RETAIL MODELS Smooth-top w/ Aero cap $444.95 Smooth-top for use w/ screw-in caps 344.95 Dash style for use w/ screw-in caps (requires PART #DS-391284 for mounting on 95-03 models) 404.95
PART # FOR 86-03 XL DS-391284 DS-391285
DS-391284
DS-391273
DS-391285
DESCRIPTION MODELS (CONT) Dash kit for 95-03 OEM electric speedo Repl. rubber mounting kit for 86-03
SUG. RETAIL $91.95 52.95
DS-390340 Side profile
CABLES
BRAKES TANKS & OIL FILTERS
DS-390340
0701-0437
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1136
GAS TANKS WITH CHROME AERO-STYLE GAS CAP •Rubber-mounted bolt-on style flat-bottom tank is made from heavy-gauge steel •Reinforced seams and extra-strong mounting tabs •”High-tunnel” design adds fuel capacity without looking tall; 3.3-gallon capacity •Features a chrome aero-style locking gas cap with keys •Accepts a 22mm petcock; sold separately NOTE: May require seat nose modification and relocation of ignition switch on some models. PART # DS-390340
DESCRIPTION For 86-94 XL (right-side petcock)
SUG. RETAIL $239.95
PART # 0701-0437
DESCRIPTION For 95-03 XL (left-side petcock)
SUG. RETAIL $239.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
SECTION DS‑391223 Side profile
DS‑391224
16
WINDSHIELDS & FAIRINGS
GAS TANKS •Bolt-on gas tanks for XL models are made of heavy-gauge steel with reinforced seams •Come complete with extra-strong mounting tabs •2.9-gallon tanks are 2” wider than stock tanks •PART #DS-391220 uses a 3/8” NPT petcock, all others use 22mm; petcocks sold separately later in this section
TOURING AUDIO & COMMUNICATION
NOTE: When this gas tank is installed on 92 and later models and the Original Equipment continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw‑type caps.
LUGGAGE SEATS & SISSY BARS
NOTE: 86‑94 tanks have petcocks on the right side, 95‑03 tanks have petcock on left side. PART # DS‑391226 DS‑391225
DESCRIPTION 2.9-gallon rubber mount tank for 95-03 XL 2.25-gallon rubber mount tank for 95-03 XL
SUG. RETAIL $169.95 154.95
ABREW FABRICATIONS WELD‑ON GAS TANK EXTENSIONS
PART # DS‑391224 DS‑391223
DESCRIPTION 2.25-gallon rubber mount tank for 86-94 XL 2.9-gallon rubber mount tank for 86-94 XL
SUG. RETAIL $149.95 179.95
0701‑0095 0701‑0096
•Economical way to get the look of stretched gas tanks •Curved to match the tank’s natural curves •Do not increase gas tank capacity •Extension for 84-99 flat-side DS‑391253 tanks requires a shortened seat nose •For custom dashes that fit these extensions, see section 17 •Made in the U.S.A.
DESCRIPTION 3” for 3.5-gallon 84-99 flat-side tanks 6” for all 5-gallon flat side tanks
SUG. RETAIL $163.95 183.95
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
0701‑0097
NOTE: Installation is recommended by experienced professionals only. If tanks have a sealer in them, installation will cause the sealer to peel from tank. Remember to pressure‑check tanks before resealing and painting. PART # DS‑391253 0701‑0095
EXHAUST
PART # 0701‑0096 0701‑0097
DESCRIPTION 6” for 00-07 Softail (except Deuce) 6” for 93-07 FL
SUG. RETAIL $183.95 183.95
GASKETS & SEALS ELECTRICAL
LIGHTING 0701‑0693
0701‑0694
HANDLEBARS, CONTROLS & MIRRORS CABLES
WINGED TANK EXTENSION •Provides the look of a sleek custom tank without hassle of cutting, grinding, welding or buying an expensive aftermarket tank •Made of high-quality, oven-cured composite materials to ensure stability; strategically, hand-placed fibers provide structural integrity •Primed and ready to paint •Easy to install; bolts directly to stock Road Glide or Street Glide tank NOTE: Requires purchase of a new seat or modification of current seat. PART # DESCRIPTION 0701‑0693 For 09-13 FLT, FLHT, FLHX, FLTR
BRAKES
WELD‑ON GAS/OIL TANK TABS
SUG. RETAIL $399.95
PART # DESCRIPTION 0701‑0694 For 97-07 FLT, FLHT, FLHX, FLTR
SUG. RETAIL $399.95
•Laser-cut 1/4” steel tabs are a great way to mount a custom gas or oil tank •Kit includes two steel tabs and four rubber grommets •Made in the U.S.A. SUG. PART # DESCRIPTION 0704‑0009 Weld-on gas/oil tank mount kit
TANKS & OIL FILTERS DASHES & GAUGES
RETAIL $24.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
CUSTOM MOUNTING KIT FOR FLATSIDE TANKS
CUSTOM BOLT KIT FOR FLAT SIDE TANKS
•Kit includes mount brackets, rubber mounts, hose protector, chrome-plated beveled washers and mounting screws •Can be used to update the stock mounting hardware or for new constructions
WHEELS & AXLES
•Chrome-plated hardware replaces front OEM gas tank mounting bolts •Includes four 5/16”-18 x 3/4” flathead Allen bolts with recessed washers
PART # DESCRIPTION DS‑391301 For 84 FXST, FLST and all 85-99 models w/ split tanks
SUG. RETAIL $61.95
PART # DS‑391357
DESCRIPTION For all 91-99 Softail models
SUG. RETAIL $14.95
WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure‑tested and sealed BEFORE being painted to eliminate potential problems.
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1137
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
FAT BOB-STYLE GAS TANK CONVERSION MOUNTS
CUSTOM ONE-PIECE GAS TANK MOUNTING KIT
•Complete tank mount kit adapts new rubber-mounted flatside fuel tanks to 84 and earlier solid tank-mounted frames •Two of the mounts bolt on; rear mount requires welding •Include all mounting hardware, grommets and instructions •Made in the U.S.A.
•Kit includes front and rear tank mounts, rubber grommets and hardware
PART # DESCRIPTION SUG. RETAIL DS-391300 For custom frame applications using flat-side gas tanks $65.95
PART # DESCRIPTION DS-391648 For most aftermarket FXST, FLST one-piece tanks on 84-99 models
1913-3016
1913-3015
1913-3014
SUG. RETAIL $49.95
2401-0119
EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1138
GAS TANK MOUNTING HARDWARE KITS •Custom chrome-plated mounting kits •Available in acorn nut or flat head Allen styles •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL ACORN NUT-STYLE W/ STUD 1913-3015 For 00-13 FXST/FLST models $12.95 1913-3016 For 84-99 FXST/FLST models 12.95 1913-3014 For 91-03 Dyna models 24.95 2401-0119 For 04-13 XL models 22.95 1913-3007 For 96-03 XL models 35.95 FLAT HEAD ALLEN-STYLE W/ COUNTERSUNK WASHERS 1913-3006 For 98-13 FLT models 12.95 1913-3013 For 91-99 FXST/FLST models 12.95
1913-3006
1913-3007
1913-3013
DS-280459
REPLACEMENT GAS TANK BUNGS •Weld-in style bungs used for custommounting filler hole in fuel tanks •Accepts 84-E96 screw-in gas caps •Available in vented or non-vented styles •Sold each PART # DS-280458 DS-280459
DESCRIPTION Vented Non-vented
DS-280458
DS-280458
SUG. RETAIL $7.95 7.95
•Rubber grommet with metal sleeve •Sold each to consumer; sold to dealer in packs of 10 SUG. RETAIL
$1.95 (ea.)
FUEL TANK MOUNTING GROMMET KIT •Kit includes six rubber grommets and two steel sleeves •One kit required for a set of tanks •Made in the U.S.A. PART # 1913-3005
DESCRIPTION For 84-99 FXST/FLST, 85-86 FX/FXWG
•Rubber mounting grommets from Genuine James Gaskets •Sold in 12-packs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-391241 For 84-99 Softail, 85-86 FX/FXWG w/ OEM gas tanks and most aftermarket Fat Bob gas tanks; repl. OEM #11447 $1.95 (ea.)
PREMIUM FUEL TANK MOUNTING BUSHINGS
GAS TANK GROMMETS PART # DESCRIPTION DS-391240 For 85-86 FX, FXWG and 84-99 Softail OEM gas tanks and most aftermarket Fat Bob-style gas tanks; grommet/sleeve repl. OEM #s 11447/5775
FUEL TANK MOUNTING GROMMETS
SUG. RETAIL $8.95
•Gooden-Tight tank bushings •Injection-molded high-grade polyurethane with two-piece air-pocketed design •Chemical-resistant, weatherproof, won’t crack, break down or damage sheet metal or paint •Can be used to mount virtually anything that would normally be rubber mounted •Two-piece bushing design makes for easy installation •Aluminum bushing i.d. is 5/16” •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 FXST, FLST, 85-86 FX, FXWG 0704-0008 Aluminum bushing inserts and polyurethane bushing combo (10-pk.) 0704-0006 Polyurethane bushings only (10-pk.) 0704-0007 CNC-machined aluminum bushing inserts (6-pk.)
All part numbers in BLUE are new for 2013.
0704-0008
0704-0006 0704-0007
SUG. RETAIL
$79.95 34.95 42.95
SECTION
16
WINDSHIELDS & FAIRINGS 0703-0304
TOURING AUDIO & COMMUNICATION
0703-0328
0703-0289
LUGGAGE
0703-0379
SEATS & SISSY BARS
0703-0293
0703-0324
EXHAUST
POP-UP GAS CAPS •Billet aluminum construction that is available in a polished chrome or black finish •Fit is nearly flush when closed; openseasily with just a quarter-turn of the center of cap •Styles available to fit early and late-model OEM gas tanks with screw-in style gas caps •Sold each
FUEL/AIR SYSTEMS
PART # DESCRIPTION SUG. RETAIL FOR L96-13 MODELS (EXCEPT 04-12 XL) (2.36” O.D.) 0703-0459 Vented, chrome $49.95 0703-0460 Vented, black wrinkle 49.95 0703-0292 Non-vented, chrome 49.95 0703-0327 Non-vented, black wrinkle 49.95 0703-03281 Dummy style; repl. fuel gauge, chrome 29.95 FOR 84-E96 MODELS (2.36” O.D.) 0703-0289 Vented, chrome 49.95 0703-0324 Vented, black wrinkle 49.95 0703-0325 Non-vented, black wrinkle 49.95 0703-0290 Non-vented, chrome 49.95 REPLACEMENT PARTS 0703-0379 Gas cap seal (5-pk.) 1.95 (ea.) 1
2.75” o.d.
ENGINE
POP-UP GAS FILLER AND FUEL LEVEL CAPS •Replace your stock cap and gas gauge with these sleek additions •Left-side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included •User-programmable to light the LED at any pre-set fuel level •Fits all bikes with a left-side analog gas gauge •Matching right-side filler cap is vented and sized to match the left-side cap (sold separately) •Caps fit nearly flush, and the filler cap opens easily with a quarter-turn of the cap center •Chrome finish •Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products PART # DESCRIPTION FOR L96-13 MODELS (EXCEPT 04-13 XL) (2.75” O.D.) 0703-0304 Fuel level cap w/ LED warning light 0703-0293 Vented pop-up gas cap
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
SUG. RETAIL $109.95 49.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
0703-0200
0703-0199
0703-0305
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
0703-0199
GAS CAPS WITH PAINT PROTECTORS
LOW PROFILE GAS FILLER AND FUEL LEVEL CAPS
0703-0201
•Chromed low-profile gas caps feature screw-in paint protectors and ratchet-action cap •Available in vented, non-vented and dummy styles •Vented cap has right-hand threads and can be used in either the right side of double-capped tanks or in single-cap tanks •Non-vented cap has left-hand threads and is used only in the left side of double-capped tanks •The dummy cap replaces the OEM fuel gauge in tanks that feature the fuel gauge in the left side; does not feature a fuel gauge •Sold each; comes complete with installation tool for paint protector PART # DESCRIPTION FOR L96-13 H-D MODELS 0703-0199 Vented, RH thread 0703-0200 Non-vented, LH thread 0703-0201 Dummy style, repl. fuel gauge
SUG. RETAIL $64.95 54.95 34.95
FRAMES, SUSPENSION & FENDERS
•Replace your stock cap and gas gauge with these sleek caps •Left-side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included •User-programmable to light the LED at any pre-set fuel level •Fits all bikes with a left-side analog gas auge •Matching right-side filler cap is vented and includes a screw-in paint protector ring and ratchet action cap (sold separately) •Chrome finish •Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products PART # FOR L96-13 MODELS 0703-0305 0703-0199
DESCRIPTION Fuel level cap w/ LED warning light Vented Low Profile filler cap with protector ring and ratchet cap
All part numbers in BLUE are new for 2013.
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
SUG. RETAIL $109.95 64.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1139
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
SKULL GAS CAPS •Feature chrome or gloss black finish with contrasting screen skull •Available in vented, non-vented and dummy styles •Dummy cap replaces and eliminates the fuel gauge on the left side of tank •Sold each PART # DESCRIPTION SUG. FOR L96-13 MODELS (EXCEPT 04-13 XL) 0703-0463 Vented chrome 0703-0464 Non-vented chrome 0703-0467 Vented black 0703-0468 Non-vented black
RETAIL $21.95 21.95 21.95 21.95
PART # DESCRIPTION FOR 84-E96 MODELS 0703-0465 Vented chrome 0703-0466 Non-vented chrome 0703-0469 Vented black 0703-0470 Non-vented black
0703-0392
0703-0469
0703-0465 SUG. RETAIL $21.95 21.95 21.95 21.95
PART # DUMMY CAP 0703-0471 0703-0472
0703-0389
DESCRIPTION (REPL. FUEL GAUGE) Chrome Black
SUG. RETAIL $21.95 21.95
0703-0228
EXHAUST 0703-0229
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
STRAIGHT-CUT GAS CAPS •Billet aluminum construction with machined highlights •Available in vented, non-vented and dummy snap-in styles •Dummy snap-in cap replaces the left-side fuel gauge to give a balanced look to a twin cap fuel tank •Design matches other Drag Specialties/Carl Brouhard Designs products PART # DESCRIPTION FOR L96-13 H-D MODELS 0703-0392 Chrome, vented 0703-0393 Gloss black/re-machined, vented 0703-0394 Chrome, non-vented 0703-0395 Gloss black/re-machined, non-vented 0703-0396 Chrome, left side (replaces fuel gauge) 0703-0397 Gloss black/re-machined, left side (replaces fuel gauge) FOR 84-E96 H-D MODELS 0703-0388 Chrome, vented 0703-0389 Gloss black/re-machined, vented 0703-0390 Chrome, non-vented 0703-0391 Gloss black/re-machined, non-vented
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1140
$56.95 56.95 56.95 56.95 56.95 56.95 56.95 56.95 56.95 56.95
SCREW-IN LOCKING GAS CAPS •Chrome locking cap discourages fuel theft and tampering •Lock has a swing-away cover to keep dirt and debris out of the locking mechanism •Come with two keys •Sold each PART # FOR L96-13 MODELS 0703-0230 0703-0231 FOR 84-E96 MODELS 0703-0228 0703-0229
DS-390136
BRAKES TANKS & OIL FILTERS
SUG. RETAIL
Vented Non-vented
$19.95 19.95
Vented Non-vented
20.95 20.95
DELUXE GAS CAPS
•Feature a provision for evaporative emissions control equipment •Sold individually DESCRIPTION
SUG. RETAIL
W/ vent; repl. OEM #61272-92A W/o vent; repl. OEM #61103-83B
$13.95 13.95
W/ vent; repl. OEM #61102-83A W/o vent; repl. OEM #61103-83B
13.95 13.95
DS-390134
SUG. RETAIL
DS-390119
CHROME SCREW-IN GAS CAPS
PART # FOR L96-13 MODELS DS-390281 DS-390282 FOR 84-E96 MODELS DS-390135 DS-390136
DESCRIPTION
DS-390148
•One-piece, die-cast gas caps are completely chrome-finished and feature Nytrel/cork seals •Vented version has a check ball valve to prevent leakage •Both caps fit any tank using pre-82, early-type twist-on gas caps (will not fit screw-in type tanks) PART # DS-390118 DS-390119
DESCRIPTION W/ vent W/o vent
SUG. RETAIL $12.95 12.95
“LIVE TO RIDE” GAS CAPS •Complete thread-in gas caps feature the Live To Ride insignia •3” diameter available in chrome or chrome with a gold insignia •Sold individually PART # DESCRIPTION FOR ALL 84-E96 MODELS DS-390134 Chrome vented cap DS-390137 Chrome nonvented cap DS-390147 Chrome w/ gold insignia vented cap DS-390148 Chrome w/ gold insignia nonvented cap
All part numbers in BLUE are new for 2013.
SUG. RETAIL $21.95 21.95 29.95 29.95
SECTION
16
WINDSHIELDS & FAIRINGS
1914-1525
DS-390079
TOURING
1914-1526
AUDIO & COMMUNICATION
DS-390069
FLUSH-MOUNTLOCKING CAPS •For use with Drag Specialties gas tanks that accept flush-mount gas caps
AERO GAS CAPS •Replacement gas caps for Drag Specialties gas tanks that accept Aero caps •Include keys, gasket and bolts PART # 1914-1525 1914-1526
DESCRIPTION 120mm vented (ea.) 95mm vented (ea.)
PART # DS-390079 DS-390069
SUG. RETAIL $71.95 64.95
LUGGAGE
DESCRIPTION Gas cap set (one vented, one non-vented) Vented gas cap (ea.)
SUG. RETAIL $59.95 30.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
POP-UP CAP •Pop-up vented gas cap assembly is available in steel construction •Weld-in style, for custom applications PART # 301170
POP-UP GAS CAP
DESCRIPTION Pop-up w/ steel bung
•Features a weld-in, stainless steel bung with a pop-up aluminum gas cap •Measures 23/8” dia. •Made in the U.S.A.
SUG. RETAIL $74.95
PART # 0703-0113
ENGINE
DESCRIPTION Flush mount gas cap
SUG. RETAIL $157.95
GASKETS & SEALS
ZOMBIE GAS CAP •Leakproof and oh so small •Weld-in unit drops into any steel tank for a minimalist look •Dimensions: bung measures 1.5” diameter; cap measures 13/4” diameter •Made in the U.S.A. PART # 0703-0065
ELECTRICAL
DESCRIPTION Zombie vented gas cap
SUG. RETAIL $115.95
VENTED GAS CAP WITH WELD-ON BUNG
0703-0203
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0703-0252
HOT ROD GAS CAPS
•Easy weld-in cap for either gas or oil tanks •Bung is steel •Vented gas cap is aluminum with knurled edge •Raw finish •Made in the U.S.A. PART # 0703-0479
TRANSMISSION & DRIVELINE
•Black or brass caps •Available with weld-in steel bungs for custom applications •Made in the U.S.A.
DESCRIPTION Vented gas cap w/ weld-in bung
SUG. RETAIL $39.95
PART # 0703-0203 0703-0252
CABLES
DESCRIPTION Brass Black
SUG. RETAIL $229.95 207.95
0703-0404
BRAKES TANKS & OIL FILTERS
0703-0206
DASHES & GAUGES 0703-0212
FRAMES, SUSPENSION & FENDERS
GAS CAPS WITH WELD-IN STEEL BUNGS
FOOTRESTS & LICENSE PLATE FRAMES
•CNC machined from billet aluminum •Vented and non-vented caps available •Caps are for custom applications •Aluminum bung available separately for use with custom aluminum tanks •Made in the U.S.A. PART # DESCRIPTION NON-VENTED GAS CAPS WITH BUNG 0703-0206 Spoke cap, chrome 0703-0207 Spoke cap, raw 0703-0211 Sprocket cap, chrome 0703-0212 Sprocket cap, raw VENTED GAS CAPS WITH BUNG 0703-0404 Twisted cap, chrome 0703-0406 Straight cap, chrome
SUG. RETAIL $179.95 159.95 179.95 159.95 179.95 179.95
0703-0406 PART # DESCRIPTION VENTED GAS CAPS WITH BUNG (CONT) 0703-0208 Spoke cap, chrome 0703-0210 Spoke cap, raw 0703-0213 Sprocket cap, chrome 0703-0215 Sprocket cap, raw GAS TANK BUNG 0703-0216 Aluminum weld-in bung for custom aluminum tank applications
All part numbers in BLUE are new for 2013.
0703-0216 SUG. RETAIL $179.95 159.95 179.95 159.95
27.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1141
SECTION
16
WINDSHIELDS & FAIRINGS TOURING
0703-0162
AUDIO & COMMUNICATION LUGGAGE 0703-0337
0703-0163
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
0703-0341
0703-0342
BILLET ALUMINUM GAS CAPS •Screw-in vented caps sport the Roland Sands Design logo •Available in chrome, Contrast Cut™ or Black Ops finish •Contrast Cut™ finish starts with a polished gas cap that has been black anodized, then recut to open up the design •Black Ops™ is perhaps the toughest yet, featuring a gloss black on top of a contrasting textured black finish •Interchangeable RSD logo badge (black and brass) (except Vintage style) •Made in the U.S.A. PART # DESCRIPTION FOR L96-13 H-D MODELS 0703-0162 Vintage, Contrast Cut 0703-0163 Vintage, chrome 0703-0462 Vintage, Black Ops 0703-0337 Cafe, Contrast Cut 0703-0338 Cafe, chrome 0703-0339 Cafe, Black Ops 0703-0340 Tech, Contrast Cut 0703-0341 Tech, chrome
0703-0421
SUG. RETAIL $69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95
PART # DESCRIPTION FOR L96-13 H-D MODELS (CONT) 0703-0342 Tech, Black Ops 0703-0343 Gear Drive, Contrast Cut 0703-0344 Gear Drive, chrome 0703-0345 Gear Drive, Black Ops 0703-0346 Tracker, Contrast Cut 0703-0347 Tracker, chrome 0703-0348 Tracker, Black Ops
0703-0346
0703-0345
SUG. RETAIL $69.95 69.95 69.95 69.95 69.95 69.95 69.95
0703-0420
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1142
REPLACEMENT FUEL GAUGE CAPS WITH OR WITHOUT LED FUEL LIGHT
0703-0419
0703-0409
•Snap-in cap to replace the left side OEM fuel gauge 0703-0363 •Designed to match to RSD gas caps •CNC-machined from billet aluminum •Left-side cap features a built-in low-fuel LED warning light; push-in installation and wiring harness included •User-programmable to light the LED at any preset fuel level •Fits all bikes with a left-side analog gas gauge 0703-0361 •Interchangeable RSD logo badge (black and brass) (except Vintage style) •Contrast Cut™ finish starts with a polished gas cap that has been black anodized, then recut to open up the design •Black Ops™ features black gloss on top of contrasting textured black for outstanding durability and good looks •Made in the U.S.A. FOR L96-13 H-D MODELS PART # DESCRIPTION SUG. RETAIL WITH LED FUEL LIGHT 0703-0421 Vintage, Contrast Cut $139.95 0703-0420 Vintage, chrome 139.95 0703-0422 Vintage, Black Ops 139.95 0703-0409 Cafe, Contrast Cut 139.95 0703-0408 Cafe, chrome 139.95 0703-0410 Cafe, Black Ops 139.95 0703-0415 Tech, Contrast Cut 139.95 0703-0414 Tech, chrome 139.95 0703-0416 Tech, Black Ops 139.95 0703-0412 Gear Drive, Contrast Cut 139.95 0703-0411 Gear Drive, chrome 139.95
PART # DESCRIPTION WITH LED FUEL LIGHT (CONT) 0703-0413 Gear Drive, Black Ops 0703-0418 Tracker, Contrast Cut 0703-0417 Tracker, chrome 0703-0419 Tracker, Black Ops WITHOUT LED FUEL LIGHT 0703-0368 Vintage, Contrast Cut 0703-0369 Vintage, chrome 0703-0461 Vintage, Black Ops 0703-0356 Cafe, Contrast Cut 0703-0357 Cafe, chrome 0703-0358 Cafe, Black Ops
SUG. RETAIL $139.95 139.95 139.95 139.95 $69.95 69.95 69.95 69.95 69.95 69.95
All part numbers in BLUE are new for 2013.
0703-0362
0703-0365
PART # DESCRIPTION SUG. RETAIL WITHOUT LED FUEL LIGHT (CONT) 0703-0362 Tech, Contrast Cut $69.95 0703-0363 Tech, chrome 69.95 0703-0364 Tech, Black Ops 69.95 0703-0359 Gear Drive, Contrast Cut 69.95 0703-0360 Gear Drive, chrome 69.95 0703-0361 Gear Drive, Black Ops 69.95 0703-0365 Tracker, Contrast Cut 69.95 0703-0366 Tracker, chrome 69.95 0703-0367 Tracker, Black Ops 69.95
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 0703‑0485
0703‑0496
0703‑0506
LUGGAGE
0703‑0495
SEATS & SISSY BARS EXHAUST
0703‑0498
0703‑0508
0703‑0487
FUEL/AIR SYSTEMS ENGINE
0703‑0497
TRANSMISSION & DRIVELINE CUSTOM GAS CAPS •Machined Performance Machine Logo •CNC’d from aircraft grade aluminum •Vented style snap‑in dummy caps replace the left side OEM fuel gauge (R H threads) •Made in the U.S.A.
GASKETS & SEALS
0703‑0489
0703‑0499
ELECTRICAL
FOR L96‑13 H‑D MODELS PART # GAS CAP 0703‑0485 0703‑0495 0703‑0505 0703‑0486 0703‑0496 0703‑0506 0703‑0487 0703‑0497 0703‑0507 0703‑0488 0703‑0498
DESCRIPTION Apex, chrome Apex, contrast cut Apex, black ops Array, chrome Array, contrast cut Array, black ops Grill, chrome Grill, contrast cut Grill, black ops Merc, chrome Merc, contrast cut
SUG. RETAIL $69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95
PART # DESCRIPTION GAS CAP (CONT) 0703‑0508 Merc, black ops 0703‑0489 Scallop, chrome 0703‑0499 Scallop, contrast cut 0703‑0509 Scallop, black ops DUMMY GAS CAP 0703‑0480 Apex, chrome 0703‑0490 Apex, contrast cut 0703‑0500 Apex, black ops 0703‑0481 Array, chrome 0703‑0491 Array, contrast cut 0703‑0501 Array, black ops
SUG. RETAIL $69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95
PART # DESCRIPTION DUMMY GAS CAP (CONT) 0703‑0482 Grill, chrome 0703‑0492 Grill, contrast cut 0703‑0502 Grill, black ops 0703‑0483 Merc, chrome 0703‑0493 Merc, contrast cut 0703‑0503 Merc, black ops 0703‑0484 Scallop, chrome 0703‑0494 Scallop, contrast cut 0703‑0504 Scallop, black ops
SUG. RETAIL $69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95 69.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES 0703‑0407
0703‑0405 0703‑0302
GAS CAPS WITH SCREW‑IN PAINT PROTECTOR BUNGS •CNC machined from billet aluminum with a chrome finish •Sold each •Made in the U.S.A. PART # DESCRIPTION FOR L96‑13 STYLE TANKS 0703‑0405 Twisted, vented 0703‑0407 Straight, vented FOR 84‑E96 STYLE TANKS 0703‑0302 Sprocket, non‑vented 0703‑0214 Sprocket, vented 0703‑0300 Spoke, non‑vented 0703‑0209 Spoke, vented
FRAMES, SUSPENSION & FENDERS 0703‑0209
SUG. RETAIL $199.95 199.95 199.95 199.95 199.95 199.95
All part numbers in BLUE are new for 2013.
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1143
SECTION
16
WINDSHIELDS & FAIRINGS
0703-0351
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
0703-0352
GAS CAPS
0703-0354
0703-0377
0703-0378
•A great replacement for your hard-to-remove stock gas cap •Made with finger serrations for a much easier removal over the stock smooth-sided gas cap •Super-clean and low-profile design features all CNC-machined billet aluminum construction throughout •After being tightened down, the cap can rotate to any position to align design pattern •Hard black anodized or clear anodized finish •High-quality gas cap base has right-hand threads and is vented •Dimensions: 3” diameter, 1/4” thick at the edge, and 9/16” thick in the center •Made in the U.S.A. PART # DESCRIPTION FOR L96-13 H-D MODELS 0703-0351 JM U.S.A., black anodized 0703-0376 JM U.S.A., clear anodized 0703-0352 Joker, black anodized 0703-0377 Joker, clear anodized
SUG. RETAIL $59.95 59.95 59.95 59.95
PART # DESCRIPTION FOR L96-13 H-D MODELS (CONT) 0703-0353 Smooth, black anodized 0703-0378 Smooth, clear anodized 0703-0354 Techno, black anodized
BILLET GAS CAPS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Constructed from a solid piece of 6061 billet aluminum •Chrome-plated to show standards •Replace stock vented and non-vented caps •Crusader Maltese Cross cap has matching points cover also available •Sold each •Made in the U.S.A. SUG. PART # FOR L96-13 0703-0063 0703-0064 0703-0220
DESCRIPTION STYLE TANKS Maltese vented, chrome Maltese non-vented, chrome Maltese vented, black
RETAIL $48.95 48.95 44.95
SUG. RETAIL $59.95 59.95 59.95
0703-0235
0703-0236
PART # FOR 84-E96 0703-0240 0703-0242
DESCRIPTION STYLE TANKS Smoothie vented, black Smoothie non-vented, black
0703-0063 PART # FOR L96-13 0703-0221 0703-0235 0703-0236
DESCRIPTION STYLE TANKS (CONT) Maltese non-vented, black Smoothie vented, chrome Smoothie vented, black
SUG. RETAIL $44.95 49.95 49.95
SUG. RETAIL $49.95 49.95
PAINT PROTECTOR WITH BUILT-IN STAINLESS GAS CAP •Fits all screw-in gas tanks •Protects expensive paint jobs from fuel nozzle chips and gas vapors; upgrades the look with a custom gas cap •Easy installation – Paint Protector simply screws into gas tank and is locked down with the church key provided, then gas cap screws into the Paint Protector, completely covering it •Two styles to choose from: Bandit with peaked design and Renegade with smooth-domed design •Paint Protector sleeve is machined from 6061 T-6 aircraft-quality billet aluminum; gas caps are machined from solid billet 303 stainless steel; all parts are polished •Sold in pairs (one vented, one non-vented) or individually (one vented) •Made in the U.S.A. PART # FOR L96-13 MODELS DS-390081 DS-390080 DS-390083 DS-390082
DESCRIPTION
SUG. RETAIL
Bandit gas cap (ea.) Bandit gas caps (pr.) Renegade gas cap (ea.) Renegade gas caps (pr.)
$50.95 100.95 50.95 100.95
Bandit
Renegade
PART # FOR 84-E96 MODELS LMGC1041A LMGC1041 LMGC1042A LMGC1042
DESCRIPTION
SUG. RETAIL
Bandit gas cap (ea.) Bandit gas caps (pr.) Renegade gas cap (ea.) Renegade gas caps (pr.)
Bottle Opener Series
$50.95 100.95 50.95 100.95
Knurled Series
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1144
STAINLESS STEEL THIN GAS CAPS •CNC machined from 303 stainless steel Renegade •Hand polished to a brilliant shine •Available in two styles •Sold in pairs (one vented, one non-vented) or individually (one vented) •Bottle opener series comes with a Landmark gas cap key •Made in the U.S.A. BOTTLE OPENER SERIES
Bandit
KNURLED SERIES
•Less than 3mm above the tank PART # FOR 84-E96 MODELS DS-390180
Renegade
DESCRIPTION Renegade (pr.)
•Less than 4mm above the tank SUG. RETAIL $83.95
PART # FOR L96-13 DS-390020 DS-390022
DESCRIPTION MODELS Renegade (pr.) Bandit (pr.)
SUG. RETAIL
All part numbers in BLUE are new for 2013.
$83.95 83.95
PART # FOR 84-E96 DS-390170 DS-390171 DS-390172
DESCRIPTION MODELS Renegade (pr.) Renegade (ea.) Bandit (pr.)
SUG. RETAIL $83.95 44.95 83.95
SECTION
16
WINDSHIELDS & FAIRINGS
DS‑390066
TOURING AUDIO & COMMUNICATION DS‑390052
LUGGAGE SEATS & SISSY BARS DS‑390060
EXHAUST FLUSH‑MOUNT GAS CAPS •Aircraft‑style flush‑mount polished gas caps are available in 21/4” and 3” diameters •21/4” diameter caps come with or without key locks •Available in vented and non‑vented versions •Feature “weld‑in” or “bolt‑in” style bungs •Bolt‑in styles include bolts and nut plates, except PART #DS‑390060 DESCRIPTION NON‑LOCKING WELD‑IN STEEL BUNG 21/4” dia. vented DS‑390050 3” dia. vented DS‑390052
SUG. RETAIL $173.95 183.95
LOCKING
SUG. RETAIL
‑ ‑
‑ ‑
DESCRIPTION NON‑LOCKING BOLT‑IN ALUMINUM BUNG 21/4” dia. vented DS‑390058 3” dia. vented DS‑390060
FUEL/AIR SYSTEMS SUG. RETAIL $183.95 187.95
LOCKING
SUG. RETAIL
DS‑390066 ‑
$194.95 ‑
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
Peaked
ELECTRICAL
LIGHTING Stock style
HANDLEBARS, CONTROLS & MIRRORS
DS‑390039
DS‑390038
GAS CAPS
FLUSH‑MOUNT GAS CAPS •High‑tech look of aviation‑style fuel fillers •Simply screws into the stock opening in your gas tank •Keyed entry permits the low profile and prevents unauthorized entry •Outer rings prevent chips around gas opening •Available in vented and non‑vented styles for 83 and later screw‑in style tanks (L96‑13 tanks will require reusing the stock gas cap gasket) •Sold each U.S. Patent #400838. PART # DS‑390038 DS‑390039 0703‑0219
Domed Low‑profile
DESCRIPTION Vented Fat Bob‑style (right‑hand thread) Non‑vented Fat Bob‑style (left‑hand thread) Repl. key for DS‑390038, DS‑390039
SUG. RETAIL $59.95 59.95 5.95
CABLES
•Chrome‑plated finish •Available in several styles •Sold each FOR L96‑13 TANKS WITH SCREW‑IN GAS CAP PART # DESCRIPTION PEAKED 0703‑0294 Vented, right‑hand threads 0703‑0295 Non‑vented, left‑hand threads STOCK STYLE 0703‑0296 Vented, right‑hand threads DOMED LOW‑PROFILE 0703‑0298 Vented, right‑hand threads 0703‑0299 Non‑vented, left‑hand threads
DS‑390127
SUG. RETAIL $25.95 25.95
BRAKES TANKS & OIL FILTERS
14.95 25.95 25.95
DS‑390126
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
“LIVE TO RIDE” GAS CAP COVERS •Gas cap covers are a great way to detail a bike •Available with a detailed chrome or gold‑plated eagle/banner with the Live to Ride script recessed into each part •Covers are held on by special adhesive tape and include one left‑ and one right‑hand eagle emblem •Sold in pairs PART # FOR MOST 84‑13 MODELS DS‑390127 DS‑390126
DESCRIPTION Gold Chrome
SUG. RETAIL $45.95 23.95
All part numbers in BLUE are new for 2013.
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1145
SECTION
16
WINDSHIELDS & FAIRINGS
Old School Brass
ROUND SERIES Flamed
Grooved
Wave Smooth
Lightning
Finned
TOURING
Flag
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS SmoothDown outlet
HEX SERIES
EXHAUST Smooth
Finned
FUEL/AIR SYSTEMS
Hose outlet facing forward
Old School Brass Diamond
Smooth Flag
Oval
Hose outlet facing backward
ENGINE TRANSMISSION & DRIVELINE
Hose outlet facing inward
GASKETS & SEALS ELECTRICAL
DS-390231
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1146
POWER-FLO™ FUEL VALVES •Valves feature a brass body with show-quality chrome-plating, black chrome-plating or Old School Brass finish •Substantially higher fuel flow compared to OEM or aftermarket fuel valve •Necessary for adequate fuel delivery even on stock motorcycles and a must for high performance •Available with 3/8” NPT or 22mm external threads •Adapter nut included on 22mm threaded valves •Made in the U.S.A. NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever. 22MM DESCRIPTION ROUND 90° OUTLET FACING FORWARD Smooth DS-390240 Grooved DS-390241 Lightning DS-390242 Diamond Flamed DS-390244 90°OUTLET FACING BACKWARD Smooth DS-390250 Grooved DS-390251 Lightning DS-390252 Diamond Flamed DS-390254 180° OUTLET FACING INWARD Finned DS-390506 Wave DS-390507 Smooth (chrome) DS-390260 PART # 0705-0082 0705-0091 0705-0092 0705-0093 0705-0094 0705-0115 0705-0116 2107-0000 2107-0001
SUG. RETAIL $25.95 99.95 130.95 99.95 130.95 112.95 134.95 130.95 130.95
NPT ROUND
3/8”
22MM HEX
3/8”
DS-390231 DS-390243 -
DS-390245 -
DS-390209 -
DS-390233 DS-390253 -
DS-390255 -
DS-390258 -
DS-390509 DS-390235
DS-390265
DS-390211
PART # DS-390208 DS-390209 DS-390211 DS-390213 DS-390231 DS-390233 DS-390235 DS-390237 DS-390240
SUG. RETAIL $25.95 99.95 99.95 119.95 130.95 130.95 125.95 142.95 130.95
NPT
HEX
PART # DS-390241 DS-390242 DS-390243 DS-390244 DS-390245 DS-390250 DS-390251 DS-390252 DS-390253
22MM DESCRIPTION ROUND 180° OUTLET FACING INWARD (CONT) Smooth (black chrome) Grooved DS-390261 Lightning DS-390262 Diamond Flamed DS-390264 Oval Smooth (down outlet) Flag 2107-0000 Old School Brass 0705-0094 CHROME ADAPTER NUTS FOR 84-06 HD 3/8” NPT x 22mm (approximately 7/8”) 22mm to 22mm (approximately 7/8”) 0705-0082
SUG. RETAIL $130.95 130.95 134.95 130.95 99.95 130.95 130.95 130.95 134.95
PART # DS-390254 DS-390255 DS-390258 DS-390260 DS-390261 DS-390262 DS-390263 DS-390264 DS-390265
All part numbers in BLUE are new for 2013.
NPT ROUND
3/8”
22MM HEX
3/8”
0705-0116 DS-390263 DS-390510 DS-390237 2107-0001 0705-0092
0705-0093
0705-0115 DS-390268 DS-390213 0705-0091
-
DS-390208
DS-390208
0705-0082
-
-
SUG. RETAIL $130.95 99.95 115.95 130.95 130.95 130.95 134.95 130.95 99.95
PART # DS-390268 DS-390506 DS-390507 DS-390509 DS-390510
NPT
HEX
SUG. RETAIL $115.95 130.95 130.95 130.95 130.95
SECTION
16
WINDSHIELDS & FAIRINGS HIGH-FLOW FUEL VALVE WITH CUSTOM ROUND KNOB
PART # DESCRIPTION 0705-0033 22mm round; 180° outlet facing inward
RETAIL $138.95
VACUUM FUEL VALVES •Has the highest fuel flow of any vacuum-style fuel valve on the market •The same feature as OEM vacuum fuel valves – when valve is left in the “on” position with the motor off, fuel flow is shut off automatically •High-quality, lustrous chrome finish is the same as Pingel’s Power-Flo line of fuel valves •Fits all 94-06 stock applications with 22mm external thread •Will also fit 84-93 models if a vacuum source is tapped •Outlet is a single 5/16” hose barb and will accept the stock vacuum line 2107-0002 •Made in the U.S.A.
•Designed for use on bikes with custom fuel tanks that are raised high in front, which doesn’t allow proper fuel pickup with a standard reserve fuel valve •Keeps the bottom of the tank clean from fuel lines, giving universal options for mounting the fuel valve with mounting holes on the back of the valve •Smooth, clean lines with a compact design that measures 11/2” H x 2” L x 13/8” D •Easy-to-operate position selector knob with a ball detent for positive on/off/reserve locating •Two 5/16” hose inlets with one 5/16” hose outlet •Requires two hoses to be routed from the tank: one for on and one for reserve •Provides exceptional fuel flow to feed the thirstiest big-inch motors •CNC-machined from billet brass, polished and chromed •Made in the U.S.A. PART # 0705-0042
DESCRIPTION Chopper valve
2107-0003 2107-0004 ROUND STYLE 0705-0083 0705-0084 0705-0085
DESCRIPTION
SUG. RETAIL $226.95
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
DS-390285
TRANSMISSION & DRIVELINE
0705-0085 DS-289141
NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the reserve position of the fuel valve lever. PART # HEX STYLE 2107-0002
TOURING
CHOPPER VALVE
•Custom knob features a detent for positive “on” position with ball-milled grooves that give the valve a nice grip and a custom look •Substantially higher fuel flow than OEM or aftermarket fuel valves •Very universal; will work in any tank location •Valve features a brass body with show-quality chrome plating •Easy-to-read on, off and reserve positions •Made in the U.S.A. SUG.
GASKETS & SEALS
SUG. RETAIL
Left side mount, outlet facing forward; or right side mount, outlet facing back Left side mount, outlet facing back; or right side mount, outlet facing forward Universal configuration, outlet facing down Left side mount, outlet facing forward; or right side mount, outlet facing back Left side mount, outlet facing back; or right side mount, outlet facing forward Universal configuration, outlet facing down
$215.95 215.95 215.95
215.95 215.95 215.95
POWER-FLO™ -6AN FUEL VALVE
ELECTRICAL
•Chrome-plated solid brass hex-design petcock features a -6AN outlet •For use with S&S E and G series carbs •Fitting sold separately •Made in the U.S.A. PART # DS-390285 0705-0058 DS-289141
LIGHTING
DESCRIPTION For tanks w/ 22mm external threads For tanks w/ 3/8” NPT fittings -6AN fuel fitting
SUG. RETAIL $169.95 127.95 36.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
POWER-FLO FUEL VALVE WITH 1/4” NPT INLET •Hex design with a polished aluminum finish •Universal configuration – can be used in almost any tank location •Can be installed with the hose barb pointing in any direction that leaves the on/res/off lever accessible •Made in the U.S.A.
TANKS & OIL FILTERS
IN-LINE CUSTOM FUEL VALVE •Designed with the bike builder in mind •Eliminates the need to worry about fuel valve location •Simple on/off valve without reserve or filter •Made in the U.S.A.
SUG. PART # DESCRIPTION RETAIL 0705-0098 1/4” NPT, 180° outlet facing inward $90.95
PART # 0705-0032
DESCRIPTION In-line fuel valve
DASHES & GAUGES SUG. RETAIL $97.95
FUEL VALVE REBUILD KIT •Designed to rebuild Pingel 3/8” NPT and 22mm single-outlet valves •PART #DS-390225 includes all the special tools necessary, photos, instructions and enough components to rebuild three fuel valves •PART #DS-390226 includes enough components to rebuild five fuel valves; does not include any of the tools •A bench vise or press with a 61/2” or larger opening is necessary for installing a rebuild kit •Made in the U.S.A.
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS
DS-390226
DS-390225
NOTE: These kits are not designed for hose outlet down, dual or triple outlets, 1/4” NPT or race valves. Pingel recommends these valves be sent directly to them for rebuilding. PART # DS-390225
DESCRIPTION Fuel valve rebuild kit, complete
FRAMES, SUSPENSION & FENDERS
SUG. RETAIL $89.95
PART # DS-390226
DESCRIPTION Fuel valve rebuild components only
All part numbers in BLUE are new for 2013.
SUG. RETAIL $79.95
COVERS, SECURITY & GENERAL
1147
SECTION
16 DS-390504
WINDSHIELDS & FAIRINGS
0705-0051
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
THE GUZZLER® FUEL VALVES •This is a serious fuel valve for serious riders •Hardcoat anodized billet aluminum and stainless steel construction •Spring-loaded detents for positive on-off positioning; no reserve available •Flows up to 211 ounces of fuel per minute •Available with 3/8” NPT or 22mm inlets •Some styles available highly polished for that custom look •Made in the U.S.A. PART # DESCRIPTION 22MM POLISHED 0705-0049 Dual 90° 5/16” outlet 0705-0050 Single -6AN outlet 0705-0051 Single 5/16” outlet 0705-0052 Single 3/8” outlet 22MM CLEAR ANODIZED DS-390503 Dual 90° 5/16” outlet 0705-0029 Single -6AN outlet
SUG. RETAIL $190.95 184.95 173.95 173.95
0705-0029
PART # DESCRIPTION 22MM CLEAR ANODIZED (CONT) DS-390504 Single 5/16” outlet DS-390505 Single 3/8” outlet 3/8” NPT POLISHED 0705-0047 Single 5/16” outlet 0705-0056 Single -6AN outlet
0705-0057 SUG. RETAIL
PART # DESCRIPTION SUG. RETAIL 3 /8” NPT CLEAR ANODIZED DS-390501 Dual 90° 5/16” outlets $162.95 0705-0028 Single -6AN outlet 149.95 DS-390502 Single 5/16”outlet 142.95 5 /16” IN-LINE POLISHED 5 0705-0057 /16” in-line 149.95
$175.95 175.95 161.95 172.95
182.95 162.95
POSITIVE OFF DETENT FUEL VALVES •Round detent valves with levers with positive stops for the On and Reserve and a detent for the Off in the center position •Valves feature a brass body with show-quality chrome-plating •Substantially higher fuel flow compared to OEM or aftermarket fuel valve •22mm adapter nut included •Patents apply •Made in the U.S.A.
0705-0114
NOTE: All descriptions are made from a seated position on the motorcycle with a reference from outlet position to the OFF position of the fuel valve lever. PART # 22MM ROUND 0705-0113
DESCRIPTION
SUG. RETAIL
90° outlet facing backward
$138.95
PART # 22MM ROUND (CONT) 0705-0114
DESCRIPTION
SUG. RETAIL
180° outlet facing inward
$138.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
DS-390218
0705-0117
0705-0118
FUEL PETCOCKS BRAKES TANKS & OIL FILTERS DASHES & GAUGES
0705-0119
•Hi-flow petcocks feature a round, smooth body with a chrome finish •Three-position knob (on, off, reserve) with a 5/16” fuel outlet •Fits most stock tanks and custom tanks with a 22mm outlet PART # 0705-0117 0705-0118 0705-0119
DESCRIPTION Inward facing outlet Down facing outlet Forward facing outlet
SUG. RETAIL $74.95 74.95 74.95
PETCOCK REBUILD KIT
CHROME PETCOCKS •Includes filter screen, three-position control and high fuel flow •22mm thread fittings, straight or 90° outlet •All are sold each PART # 22MM DS-390218 DS-390219
DS-390219
DESCRIPTION
SUG. RETAIL
Straight spigot; repl. OEM #s 62166-81, 62168-81 90° spigot; repl. OEM #62167-81
$21.95 21.95
•Kit includes one bronze screen, one stainless steel screen, one Viton® seal, one spring washer and one gasket •Fits Drag Specialties petcock PART #s DS-390216/217, DS-390218/219, 07050002/0003/0004 and 0705-0117/0118/0119 •Kit contains components for several different styles of petcock; all components may not be used in every style PART # 0705-0099
DESCRIPTION Rebuild kit
SUG. RETAIL $9.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1148
HIGH-FLOW FUEL VALVE WITH SWIVEL SPIGOT
PETCOCK •Constructed from tripleshow-chrome-plated brass •Features an adjustable 360° swivel outlet and clicking detent that allows for accurate and universal positioning •Significantly outflows stock and modified petcocks •Made in the U.S.A. NOTE: Not for fuel-injected models. PART # DESCRIPTION 0705-0081 For stock and custom tanks w/ a 22mm outlet
SUG. RETAIL $81.95
•Chrome fuel valve from Accel is designed to replace all right, left and rear spigot applications •Unique design that incorporates a banjo-type spigot with a 180° swivel onto a high-flow fuel valve with a 22mm nut •Fuel outlet nipple is 5/16” •Features a 100 micron fuel screen NOTE: Won’t fit 3/8” NPT thread tanks. PART # DESCRIPTION 5106 High-flow fuel valve w/ swivel spigot
HIGH-FLOW CHROME PETCOCK
SUG. RETAIL $99.95
All part numbers in BLUE are new for 2013.
•Features on, off and reserve with an easy-to-use knob, 5/16” barbed fuel outlet and a fine wire-mesh screen •Valve has 3/8” NPT threads and comes with the 3/8” NPT to 22mm adapter nut •Fits all fuel tanks with 22mm outlet •Features a 100 micron fuel screen SUG. PART # DESCRIPTION RETAIL 5105 Accel high-flow petcock w/ nut $79.95
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 0705-0014
0705-0016
0705-0015
0705-0017
0705-0089
0705-0018
0705-0103
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
0705-0064 0705-0021
0705-0019
0705-0023
TRANSMISSION & DRIVELINE 0705-0061
0705-0020
0705-0107
0705-0022
“CLICK-SLICK” PETCOCKS •Manufactured from 360 brass and stainless steel ball bearings and components; available in either a chrome, black or raw brass finish •Features detents for quick, effortless switching from “On” to “Reserve” to “Off” •90° movement between each detent ensures positive transition when riding •Stainless steel internal ball bearings provide virtually friction-free petcock handle motion •Valve position firmly held in place and unaffected by vibration •Can be modified to fit custom tanks and/or be set to determine amount of reserve gas available with any custom gas tank •Made in the U.S.A. PART # DESCRIPTION 3/8” NPT CHROME 0705-0014 Backward facing 0705-0015 Downward facing 0705-0016 Forward facing 0705-0017 Straight facing 0703-0162 6-AN 0705-0018 3/8” NPT RAW BRASS 0705-0086 Backward facing 0705-0087 Downward facing 0705-0088 Forward facing 0705-0089 Straight facing
SUG. RETAIL $111.95 111.95 111.95 111.95 119.95 111.95 111.95 111.95 111.95
PART # 3/8” NPT BLACK 0705-0100 0705-0101 0705-0102 0705-0103 0705-0104 22MM CHROME 0705-0019 0705-0020 0705-0021 0705-0022 0705-0023
DESCRIPTION
SUG. RETAIL
Backward facing Downward facing Forward facing Straight facing 6-AN
$111.95 111.95 111.95 111.95 119.95
Backward facing Downward facing Forward facing Straight facing 6-AN
111.95 111.95 111.95 111.95 119.95
GASKETS & SEALS ELECTRICAL
LIGHTING
PART # DESCRIPTION 22MM RAW BRASS 0705-0061 Backward facing 0705-0062 Downward facing 0705-0063 Forward facing 0705-0064 Straight facing 22MM BLACK 0705-0105 Backward facing 0705-0106 Downward facing 0705-0107 Forward facing 0705-0108 Straight facing 0705-0109 6-AN
SUG. RETAIL $111.95 111.95 111.95 111.95 111.95 111.95 111.95 111.95 119.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
BUELL FUEL VALVE ADAPTER
FRAMES, SUSPENSION & FENDERS
•Allows the mounting of any 22mm Pingel® fuel valve on Buell models •Bolts in place of the stock fuel valve •A must for modified motors that need a higher-flow-rate fuel valve •Fuel valve must be purchased separately •Made in the U.S.A. PART # 0705-0027
DESCRIPTION For all 95-02 Buell models, except fuel-injected models
FOOTRESTS & LICENSE PLATE FRAMES
SUG. RETAIL $42.95
WHEELS & AXLES
FUEL TANK OUTLET PLUG •Use to plug the outlet on fuel tanks that use either the fuel-injection or petcock adapter •Also for use on aftermarket fuel tanks that have dual fuel outlets, but only one is required for use •Polished chrome finish •Includes O-ring seal •Fits OEM and aftermarket fuel tanks PART # DESCRIPTION that accept petcock adapter 0705-0054 Fuel tank outlet plug OEM #62842-00 (Drag PART #0705-0024)
All part numbers in BLUE are new for 2013.
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $14.95
COVERS, SECURITY & GENERAL
1149
SECTION
16 1022‑0046
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST
GAS IT FUEL INJECTION KIT •Allows the use of custom fuel tanks on 01‑05 fuel‑injected Delphi models •Relocates stock fuel pump, fuel pressure regulator, fuel filter and fuel level sending unit to underside of fuel tank (not included) •Includes steel weld‑in plate, 3.75” x 8” aluminum manifold, all hardware and instructions •Tank bottom must be relatively flat to accommodate port installation •Requires vented tank or vented gas cap PART # DESCRIPTION SUG. RETAIL •Custom fabrication required 1022‑0046 Gas It fuel injection kit $449.95 •Made in the U.S.A. IF STARTING FROM SCRATCH, PURCHASE ALL OF THE FOLLOWING COMPONENTS FROM YOUR LOCAL H‑D DEALER FOR 01‑05 DELPHI SYSTEMS
FUEL/AIR SYSTEMS ENGINE
OEM PART # 27408‑01 61001‑01 62357‑00 10222 75300‑05
DESCRIPTION Fuel pressure regulator Fuel filter kit, includes clamps, O‑ring, and hose. Fuel hose, fuel pump to filter Fuel hose clamps Fuel sender kit
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1150
62897‑01B 62900‑01B 62189‑01A
DESCRIPTION Connector assembly kit w/ connector kit Pump assembly Fuel line, tank to intake Check valve assembly w/ O‑ring
•Pump can be mounted in nearly any tank •Hollow mounting bolts secure the pump flange to the bottom of the tank and provide an outlet for wiring and pressurized fuel •In‑tank fiber filter prevents contaminants from damaging the pump or clogging fuel injectors •Kit contains pump, in‑tank filter, inlet hose, mounting hardware and instructions •Pump specifications: 58 psi, 12.0 gal/hr, 5A draw •Made in the U.S.A. PART # 1009‑0007
DESCRIPTION Fuel‑injected fuel pump for custom applications
SUG. RETAIL $609.95
0705‑0039
0705‑0055
0705‑0040 0705‑0030
PETCOCK BUNGS
TANK FITTING KIT FOR FUEL‑INJECTION TO CARBURETOR CONVERSION •Use when converting from OEM fuel‑injection systems to use a carburetor in order to deliver adequate fuel for large‑displacement engines •Kit replaces the factory tank fittings, allowing the use of a high‑quality, high‑flow Pingel fuel valve to feed the carburetor •Made of stainless steel •Kits include adapter and plug or adapter only with O‑rings or gaskets •See Pingel fuel valves on pages 1146‑1147 •Made in the U.S.A.
0705‑0097
NOTE: Due to tight tolerances in the tank fittings, a Pingel fuel valve is the only one that will fit. PART # 0705‑0031 0705‑0055 0705‑0030
TANKS & OIL FILTERS
OEM PART # 72439‑00B
FUEL PUMP FOR FUEL‑INJECTED CUSTOM BIKES
0705‑0097
DESCRIPTION For 00‑03 models w/ Delphi EFI (adapter and plug); for use w/ any Pingel 22mm valve For 00‑13 models w/ Delphi EFI (adapter only); for use w/ any Pingel 22mm valve; repl. OEM #62842‑00 For 95‑01 FLT/FLHT models w/ Magneti Marelli EFI (adapter and plug); for use w/ any Pingel 22mm valve For 07‑13 XL models; for use w/ any Pingel 1/4” NPT valve
SUG. RETAIL $51.95 29.95 51.95 76.95
WELDLESS TANK BUNG •Use when an alternative fuel source is needed, like when installing a nitrous oxide “wet” kit on fuel‑injected motorcycles or as a fitting for an oil tank •Requires a 9/16” hole for mounting; will work with any tank up to 5/8” wall thickness •1/8” NPT internal thread size •CNC‑machined from billet aluminum; includes a high‑quality Viton O‑ring for a positive seal, a stainless steel nut PART # DESCRIPTION and washer and an 80 micron filter 0705‑0043 Weldless tank bung •Made in the U.S.A.
•Highly decorative chrome cover offers a unique custom look •Large hex knob provides easy operation •Installs quickly over OEM petcock •Fits 84‑01 OEM petcocks DESCRIPTION Petcock cover
PART # 3/8” NPT 0705‑0039 0705‑0040 22MM 0705‑0034 0705‑0035
DESCRIPTION
SUG. RETAIL
Steel Aluminum
$12.95 13.95
Steel Aluminum
12.95 13.95
PETCOCK ADAPTER •Allows the use of a 22mm petcock in a fuel tank designed for Delphi fuel injection •Original equipment in 01‑06 FXSTD, 03‑06 Dressers and 04‑06 Softail carbureted bikes •Includes O‑ring for a leak‑proof seal •Accepts any petcock that installs using a 22mm nut •Chrome‑plated finish for great looks PART # 0705‑0024
DESCRIPTION Petcock adapter; repl. OEM #62842‑00
SUG. RETAIL $16.95
FUEL LINE FITTING COVER
PETCOCK COVER
PART # DS‑390359
SUG. RETAIL $49.95
0705‑0034
•Weld‑on tank 0705‑0035 bungs are available in 22mm male (stock on Harley‑Davidson carbureted fuel tanks after 1975) or 3/8” NPT female (stock on pre‑1975 Harley‑Davidson fuel tanks) •Designed to be welded directly to the fuel tank •Great for custom tanks or repairing stock tanks •Sold each •Made in the U.S.A.
•Streamlined, two‑piece cover adds a touch of chrome PART # 0706‑0037 SUG. RETAIL $29.95
DESCRIPTION For fuel‑injected 01‑07 Softails, 02‑07 FLT, FLHT and FLHR fuel‑injected models and 04‑07 fuel‑injected Dyna models
All part numbers in BLUE are new for 2013.
SUG. RETAIL
$39.95
SECTION
16
WINDSHIELDS & FAIRINGS DS-391666
IN-LINE FUEL FILTERS •Pingel® high-flow custom fuel filters are available in aluminum machined satin or chrome finish •Filters have a high-quality O-ring for a leak-proof seal •Cleanable, reusable 40 micron filter element •13/16” body length; 11/8” o.d. •Works great with Pingel’s high-volume fuel valves •Made in the U.S.A. PART # 0707-0005 0707-0006 0707-0007 0707-0008
TOURING
0707-0005
DESCRIPTION aluminum machined satin finish fuel filter (ea.) 3/8” aluminum chrome finish fuel filter (ea.) -6AN aluminum machined satin finish fuel filter (ea.) -6AN aluminum chrome finish fuel filter (ea.) 3/8”
SUG. RETAIL $38.95 45.95 50.95 57.95
PART # DS-391662
AUDIO & COMMUNICATION
DS-391662
0707-0008
DESCRIPTION aluminum machined chrome finish fuel filter (ea.) 5/16” aluminum machined satin fuel filter (ea.) Repl. 40 micron bronze filter element w/ O-ring (ea.)
SUG. RETAIL
5/16”
DS-391663 DS-391666
LUGGAGE
$45.95 38.95 17.95
SEATS & SISSY BARS EXHAUST
ANODIZED FUEL FILTERS
FUEL/AIR SYSTEMS
•Premium-quality custom Russell fuel filters with alloy cases and replaceable bronze elements •Compact size for easy installation; available in two sizes and several colors •Made in the U.S.A. PART # 45000 45010 45020 45030 45060 45070 45080 45090 DS-391708
ANODIZED ALUMINUM FUEL FILTERS
DESCRIPTION 1/4”, chrome 1/4”, red 1/4”, blue 1/4”, black 5/16”, chrome 5/16”, red 5/16”, blue 5/16”, black Repl. fuel filter element
SUG. RETAIL $17.95 16.95 16.95 17.95 16.95 17.95 16.95 16.95 7.95
ENGINE
•Customize and protect with the same filter •CNC-machined aluminum outer case •Cleanable brass filter element inside •Available in 1/4” and 5/16” sizes PART # 14-34470 14-34471 14-34472 14-34473 14-34474
DESCRIPTION SUG. RETAIL Red 1/4” $8.95 Blue 1/4” 8.95 Black 1/4” 8.95 Purple 1/4” 8.95 Gold 1/4” 8.95
TRANSMISSION & DRIVELINE
PART # 14-34430 14-34431 14-34432 14-34433 14-34434
DESCRIPTION SUG. RETAIL Red 5/16” $8.95 Blue 5/16” 8.95 Black 5/16” 8.95 Purple 5/16” 8.95 Gold 5/16” 8.95
GASKETS & SEALS ELECTRICAL
PEAK FLOW FUEL FILTERS •Machined from 6061 T-6 billet aluminum, then polished and chrome-plated •Filter element is made from pleated 304 stainless steel; filters down to 10 microns and still flows 6 gal. a minute •Mini filter body measures 13/4” L; super mini body measures 7/8” L (less fittings) •Replacement filter element available •Made in the U.S.A. PART # DESCRIPTION SUPER MINI FILTER 1/4” fittings DS-391100 5/16” fittings 0707-00101 DS-391107 Repl. filter element (ea.) 1
SUG. RETAIL $53.95 53.95 21.95
Silver anodized finish, not chrome-plated.
PART # MINI FILTER DS-391102 DS-391103 DS-391104 DS-391105 DS-391106
DESCRIPTION
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
DS-391103 SUG. RETAIL
1/4”
fittings 5/16” fittings 3/8” fittings #4 AN fittings #6 AN fittings
DS-391100 DS-391105
$57.95 57.95 57.95 57.95 57.95
CABLES
BRAKES
14-34460
DS-391676 DS-391673
DS-391672
DS-391671
DASHES & GAUGES
DS-391675
FRAMES, SUSPENSION & FENDERS
14-34450
UNIVERSAL FUEL FILTERS
FOOTRESTS & LICENSE PLATE FRAMES
DS-391674
•Sizes to fit 1/4” or 5/16” fuel lines •Glass fuel filters have glass body with chrome end caps; include hose clamps and spare nylon filter element •Metal high-performance fuel filters feature brass filter element, all-metal casing and hose clamps
•Glass filters feature chrome ends •Available in two inlet sizes 1/4” or 5/16” i.d., and in two lengths: mini (13/8”) and standard (23/8”) •Replacement filter elements available
PART # 14-34450 14-34460 14-34451 14-34461 14-34455
PART # DESCRIPTION MINI FILTERS 1/4” inlet DS-391673 5/16” inlet DS-391671 STANDARD FILTERS 1/4” inlet DS-391674
DESCRIPTION glass filter 5/16” metal filter 1/4” glass fuel filter 1/4” metal filter Repl. filter (10-pk.) 5/16”
TANKS & OIL FILTERS
SUG. RETAIL $10.95 9.95 10.95 9.95 9.95
CLEAR FUEL FILTERS
SUG. RETAIL $10.95 10.95 10.95
All part numbers in BLUE are new for 2013.
PART # DESCRIPTION STANDARD FILTERS (CONT) 5/16” inlet DS-391672 REPLACEMENT ELEMENTS DS-391675 Short DS-391676 Long
SUG. RETAIL $10.95 2.95 2.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1151
SECTION
16
WINDSHIELDS & FAIRINGS TOURING 0706‑0134
0706‑0133
AUDIO & COMMUNICATION
0706‑0131
LUGGAGE
1009‑0014
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE
0706‑0132
FUEL PUMP COMPONENTS •All parts are OEM replacement •Check OEM part # for the correct application •Sold each PART # HOUSING END CAP 0706‑0134 FILTER END CAP 0706‑0133 FUEL PRESSURE REGULATOR 0706‑0132 0706‑0131 REGULATOR HOUSING 1009‑0014
DESCRIPTION
SUG. RETAIL
For 02‑07 FLT/FLHT/FLHR/FLTR models, 01‑07 FXST/FLST models; repl. OEM #62165‑01
$12.95
For 04‑13 FXD models; repl. OEM #61013‑04A
12.95
For 08‑13 FLHT/FLTR/FLHR models, 04‑13 FXD, FXDWG models, 08‑13 FXST/FLST models; repl. OEM #61015‑04A For 02‑07 FLT/FLHT/FLTR/FLHR models, 01‑08 FXST/FLST models; repl. OEM #27408‑01
28.95 36.95
For 01‑07 Softail and 02‑07 Touring models; repl. OEM #62373‑01
13.95
GASKETS & SEALS 0701‑0665
ELECTRICAL
0701‑0668
0701‑0663
0701‑0670
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0701‑0666 0701‑0664
CABLES
0701‑0667 0701‑0669
SEALS FOR FUEL PUMP DOORS BRAKES TANKS & OIL FILTERS DASHES & GAUGES
•Available for Big Twin and XL models •Meets or exceeds OEM specification •Replacement screws available separately •Sold each PART # 0701‑0663 0701‑0666 0701‑0665 0701‑0664 0701‑0668
DESCRIPTION For 91‑01 FLT/FLHT/FLTR/FLHR; repl. OEM #61326‑95 For 02‑07 FLHT/FLTR/FLHR; repl. OEM #61402‑02 For 08‑13 FLHT/FLTR/FLHR; repl. OEM #61402‑08 For 02‑13 Softail models (except Deuce); repl. OEM #61381‑02 For 04‑10 FXD, 05‑06 FXDC, 04‑05 FXDX; repl. OEM #75245‑04A
FRAMES, SUSPENSION & FENDERS
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1152
PART # 0701‑0669
6.95
0701‑0670
18.95
0701‑0667
DESCRIPTION For 04‑13 FXDL, 10‑13 FXDWG, 06‑13 FXDB, 12‑13 FLD; OEM #75248‑04 For 07‑13 FXDC, 08‑13 FXDF, 04‑08 FXDWG; repl. OEM #75249‑04 For 07‑13 XL; repl. OEM #75301‑07
SUG. RETAIL $16.95 16.95 18.95
2401‑0741 2401‑0740
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
SUG. RETAIL $7.95 11.95 16.95
FUEL PUMP TOP PLATE HARDWARE KITS
2401‑0742
•Kits include the proper amount of OEM replacement screws for fuel pump top plate •Washers included •Made in the U.S.A. PART # 2401‑0740 2401‑0741 2401‑0742
DESCRIPTION For 01‑13 FXST, FLST, 02‑07 FLHT, FLHR, FLHX, FLTR models; repl. OEM #1311D For 04‑13 Dyna; repl. OEM #1331 For 07‑13 XL; repl. OEM #1081A
All part numbers in BLUE are new for 2013.
SIZE 8‑32 x 1/2” (10‑pk.) 8‑32 x 3/4” (12‑pk.) 10‑24 x 7/8” (5‑pk.)
SUG. RETAIL $6.95 16.95 2.95
SECTION
16
WINDSHIELDS & FAIRINGS
0706‑0126
0706‑0125
0706‑0127
TOURING 0706‑0128
0706‑0129
AUDIO & COMMUNICATION
0706‑0130
FUEL CHECK VALVE ASSEMBLIES •Include check valve, required fittings and line •Meets or exceeds OEM requirements •For Delphi EFI systems only PART # 0706‑0127 0706‑0126
DESCRIPTION For 08‑13 FLHT/FLHR/FLHX/FLTR and H‑D FL Trike models; repl. OEM #62228‑08A For 03‑07 FLHT/FLHR/FLHX/FLTR models; repl. OEM #62228‑03
SUG. RETAIL $29.95 21.95
PART # 0706‑0125
DESCRIPTION For 99‑02 FLHT/FLHR/FLTR models; repl. OEM #61408‑00A For 08‑13 Softail models; repl. OEM #62189‑08 For 01‑07 Softail models; repl. OEM #62189‑01A For 04‑13 Dyna Glide models; repl. OEM #62194‑04B
0706‑0129 0706‑0128 0706‑0130
SUG. RETAIL $21.95 29.95 21.95 29.95
LUGGAGE SEATS & SISSY BARS EXHAUST
0706‑0121
0706‑0122
0706‑0123
0706‑0124
EFI FUEL LINES
INTERNAL FUEL LINE
ENGINE
•High‑quality OEM replacements •Replaces the fuel line from the tank to the fuel rail •Includes necessary connectors
•Internal fuel line for pump to filter on fuel‑injected models •Sold each PART # DESCRIPTION 0706‑0115 For 01‑07 Softail, 00‑07 FLHT/FLHR models; repl. OEM #62357‑00
FUEL/AIR SYSTEMS
SUG. RETAIL
$9.95
PART # 0706‑0121 0706‑0122 0706‑0123 0706‑0124
DESCRIPTION For 08‑13 FLHT/FLHR/FLHX/FLTR and H‑D FL Trike models; repl. OEM #62905‑08 For 02‑06 FLHT/FLHR/FLHX/FLTR, 04‑13 FXD, FXDWG models; repl. OEM #62349‑04F For 07 FLHT/FLHR/FLTR/FLHX, 01‑13 FXST, FLST models; repl. OEM #62900‑01D For 07‑13 XL models; repl. OEM #27693‑07
SUG. RETAIL $39.95 39.95 39.95 53.95
0707‑0014
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
FUEL FILTER KITS •OEM‑style replacement fuel filters •Essential to keep bikes running in top condition •PART #0707‑0011 includes filter, fuel line and clamps •PART #0707‑0012 includes filter and O‑ring •PART #0707‑0013 includes filter only •PART #0707‑0014 includes filter, strainer, O‑ring, wire ties and clamp PART # 0707‑0011 0707‑0012
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
0707‑0011 0707‑0012
CABLES
DESCRIPTION For 01‑07 FXST/FLST, 02‑07 FLT/FLHT/FLHR/FLHX/FLTR w/ Delphi EFI; repl. OEM #61001‑01 For 04‑13 FXD, 08‑13 FXST/FLST/FXS, 08‑13 FLHT/FLHR/ FLTR and H‑D FL Trike w/ Delphi EFI; repl. OEM #61011‑04A
0707‑0013
SUG. RETAIL $39.95
PART # 0707‑0013
14.95
0707‑0014
DESCRIPTION For 95‑99 FLT/FLHT/FLHR/FLTR w/ Magnetti Marelli EFI; repl OEM #61343‑95 For 07‑13 XL w/ Delphi EFI; repl. OEM #75304‑07A
0706‑0005 0706‑0016 HDFL005
SUG. RETAIL $39.95 39.95
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
FUEL TANK CROSSOVER LINES FUEL‑INJECTION LINES •Upgrade over the stock kit •Flex lines are stainless steel braided •Chrome steel hard line and fittings •All components are resistant to all chemicals found in gasoline •Replacement O‑Ring sold in pairs
SUG. DESCRIPTION RETAIL Fuel‑injection line for 95‑99 FLHTCU‑I, 98‑99 FLHRC‑I, 98‑99 FLTR‑I, 96‑99 FLHTC‑I, 96 FLTCU‑I, 96‑97 FLHR‑I $202.95 0706‑0208 Repl. O‑Ring 2.95
PART # HDFL005
FOOTRESTS & LICENSE PLATE FRAMES
•Replaces the stock rubber lower crossover lines with stainless steel lines •Seals with compression fittings for a positive seal •Made in the U.S.A. PART # DESCRIPTION CROSSOVER LINES 0706‑0007 For 97‑07 FLT/FLHT models 0706‑0004 For 00‑13 FXS/FLS/FXST/FLST models (except Deuce) 0706‑0005 For 00‑07 FXSTD models 0706‑0006 For 86‑99 FXST/FLST models 0706‑0003 For 93‑05 Dyna models REPLACEMENT WASHER 0706‑0016 For fuel lines (6‑pk.)
All part numbers in BLUE are new for 2013.
SUG. RETAIL
WHEELS & AXLES
$26.95 26.95 26.95 28.95 26.95 .95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1153
SECTION
16
WINDSHIELDS & FAIRINGS
0706‑0024
0706‑0059
TOURING FUEL LINE CROSSOVER FOR CUSTOM TANKS
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
•Stainless steel braided #3 line •Two chrome 90° fittings •For use with custom tanks •Available in 6” or 9” lengths •Made in the U.S.A.
STERLING CHROMITE® II FUEL TANK CROSS‑OVER LINES •Only Sterling Chromite® II uses the patented technology to create an exclusive braid that looks like chrome •Perfectly matches color and weave of all other Magnum Sterling Chromite II cables and lines •High‑quality clear covering won’t discolor and makes cleaning easy •Polished chrome‑plated ends •Complete compression‑style line assemblies •Unique design eliminates leaks •Made in the U.S.A. LENGTH INCLUDING PART # 0706‑0024 0706‑0025 0706‑0026 0706‑0027 0706‑0028 0706‑0029
FITS MODEL 86‑99 Softail 00‑13 Softail (except Deuce) 00‑07 Deuce 97‑07 FLT/FLHT/FLHR 03 Dyna 04‑05 Dyna
FITTINGS 111/2” 51/2” 7” 91/2” 51/4” 53/4”
SUG. RETAIL $49.95 49.95 49.95 49.95 49.95 49.95
TRANSMISSION & DRIVELINE
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS
DESCRIPTION 6” 9”
SUG. RETAIL $29.95 30.95
DS‑096648
FUEL LINE CROSSOVERS •Braided stainless steel hose features 5/16” i.d. for maximum fuel flow •Attach to crossover tubes with compression fittings for a positive seal – no more worm gear clamps •Made in the U.S.A. PART # 0706‑0012 0706‑0011 0706‑0031 0706‑0010 0706‑0030 DS‑096648 DS‑222617
0706‑0142
GASKETS & SEALS
PART # 0706‑0059 0706‑0060
DESCRIPTION For 00‑13 FXS/FLS/FXST/FLST, 51/2” (except FXSTD) For 86‑99 FXST/FLST, 103/4” For 00‑07 FXSTD For 99‑05 Dyna, 53/4” For 97‑07 FLT Universal stainless steel crossover fuel line (not for FXR and Dyna) for 1/4” outlets, 111/2” Repl. seals for crossover fuel line (6‑pk.)
FUEL LINE CROSSOVERS
SUG. RETAIL $34.95 39.95 33.95 41.95 41.95 45.95 7.95
0706‑0141
•Clear‑coated stainless braided hose •Chrome‑plated steel compression fittings •Use with OEM‑style tanks
SUG. PART # DESCRIPTION RETAIL FUEL LINE CROSSOVERS 0706‑0142 For 00‑13 FXS/FLS/FXST/FLST (except FXSTD) $33.95 0706‑0143 For 86‑99 FXST/FLST 33.95 0706‑0146 For 00‑07 FXSTD 33.95 0706‑0145 For 99‑05 FXD 33.95 0706‑0144 For 97‑07 FLT 33.95 SEAL KITS 0706‑0147 For 00‑13 FXS/FLS/FXST/FLST, 00‑07 FXSTD, 97‑07 FLT, (6‑pk.) 3.95 0706‑0148 For 86‑99 FXST/FLST, 99‑05 FXD, (6‑pk.) 3.95
UNIVERSAL FUEL LINE CROSSOVERS •Clear‑coated stainless braided hose •Chrome steel adapters •For use with tanks that feature 1/8” NPT ports in bottom of tank •Available in 6” and 9” lengths PART # 0706‑0140 0706‑0141
DESCRIPTION 6” 9”
SUG. RETAIL $25.95 26.95
UNIVERSAL FUEL LINE CROSSOVER WITH QUICK DISCONNECT •Braided steel hose •Chrome steel fittings •Quick‑disconnect feature stops fuel flow during tank removal •1/4” fittings
DASHES & GAUGES
PART # 0706‑0188
DESCRIPTION 14” length
SUG. RETAIL $104.95
0706‑0199
0706‑0198
0706‑0200
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1154
IN‑LINE FUEL QUICK DISCONNECT COUPLINGS •Durable die‑cast body constructed from chrome‑plated brass •Features stainless springs, pin, latch, viton O‑rings and acetal shutoff valves •Barbed hose ends provide simple attachment to common 3/16”, 1/4” and 5/16” hoses •Double shutoff valves prevent fuel leakage during disassembly •Perfect for fuel crossover or fuel line usage •Couplings work up to 250 psi •Made in the U.S.A. PART # 0706‑0198 0706‑0199 0706‑0200
DESCRIPTION quick disconnect coupling 1/4” quick disconnect coupling 5/16” quick disconnect coupling 3/16”
SUG. RETAIL $54.95 55.95 69.95
PART # 0706‑0201 0706‑0202
0706‑0201 0706‑0202 DESCRIPTION Repl. viton O‑rings for 3/16” and 1/4” size (2‑pk.) Repl. viton O‑rings for 5/16” size (2‑pk.)
All part numbers in BLUE are new for 2013.
SUG. RETAIL $3.95 3.95
SECTION
16
WINDSHIELDS & FAIRINGS
0710‑0021 0710‑0022
TOURING CUSTOM OIL TANKS •Chrome‑plated steel construction •Includes mounting tabs •Available in side or center fill •Domed ends •Designed with built‑in battery box •Approximately 3.3 quart capacity
AUDIO & COMMUNICATION
PART # DESCRIPTION FOR 84‑99 FXST, FLST AND CUSTOM RIGID FRAMES 0710‑0021 Domed, center fill 0710‑0022 Domed, side fill
LUGGAGE
SUG. RETAIL $319.95 319.95
SEATS & SISSY BARS
0710‑0081 DS‑310109
EXHAUST FUEL/AIR SYSTEMS
0710‑0040
0710‑0041
•3.5 quart capacity oil tanks in a chrome finish •Features a 1/4” pipe feed and return and 1/8” pipe vent •Center fill design •Measures 6” in dia. and 111/2” W •Made in the U.S.A. DESCRIPTION
PART # 0710‑0081 SUG. RETAIL
Round Domed
ENGINE
•Features a side‑fill design •PART #DS‑310109 includes oil filler plug •PART #0710‑0081 does not include filler plug; must be purchased separately
CUSTOM OIL TANKS
PART # FOR 84‑99 FXST/FLST 0710‑0040 0710‑0041
CHROME OIL TANKS
$389.95 321.95
DS‑310109 0710‑0089 DS‑350150
DESCRIPTION Oil tank for 00‑13 Softail (approx. 3.5 quart capacity); repl. OEM #62498‑00A Oil tank for 89‑99 Softail (approx. 3.0 quart capacity); repl. OEM #62498‑89A Repl. oil filler plug for PART #0710‑0081 Repl. oil filler plug for PART #DS‑310109 (ea.)
DS‑310113
SUG. RETAIL $229.95 199.95 16.95 7.95
TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
DS‑310231
DS‑310232
LIGHTING SMOOTH‑STYLE CUSTOM OIL TANK
WINGED OIL TANKS •Features chrome finish and a winged design that fills the gap between the tank and frame •Includes filler cap and drain plug •Approximately 3.0 quart capacity PART # FOR 89‑99 SOFTAIL DS‑310232 DS‑310113
DESCRIPTION
SUG. RETAIL
Center‑fill Side‑fill
$199.95 214.95
•Bolt‑on oil tank with a custom wraparound look is easily installed •Made of chromed‑finish, heavy‑gauge steel •Conveniently located drain and chrome filler cap •Battery opening measures 73/8” L x 43/16” W x 59/16” D •Features a 3.5 quart capacity with Softail‑type oil line fittings and a two‑piece front mounting bracket for easy installation •Requires PART #DS‑245262 drain plug •Made in the U.S.A. PART # DS‑310231 DS‑245262
DESCRIPTION Oil tank for 85‑86 FX/FXWG Chrome hex‑head drain plug, 1/8” NPT
SUG. RETAIL $364.95 2.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES
DS‑310119
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES DS‑310102
•A duplicate of the original equipment black oil tank, but this is highly polished and chrome‑plated for exceptional looks •Includes filler cap •Approximately 3.0 quart capacity PART # 0710‑0046 DS‑310119 DS‑310102
WHEELS & AXLES
FXR OIL TANK
CHROME OIL TANKS
DESCRIPTION For 97‑03 XL: repl. OEM #62475‑97/62888‑99 For 94‑96 XL; repl. OEM #62475‑94 For 86‑93 XL; repl. OEM #62475‑83
SUG. RETAIL $159.95 144.95 139.95
•Formed steel construction with a chrome finish •Bolt‑in application; uses OEM mounts •Fittings, clamps and hoses included •Approximately 3.0 quart capacity
HARDWARE, CHEMICALS & TOOLS
NOTE: Cap not included; must be purchased separately. PART # 0710‑0003
DESCRIPTION For 86‑94 FXR and most aftermarket FXR frames
All part numbers in BLUE are new for 2013.
SUG. RETAIL $154.95
COVERS, SECURITY & GENERAL
1155
SECTION
16
WINDSHIELDS & FAIRINGS 1105‑0028
TOURING AUDIO & COMMUNICATION
0710‑0088
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
FUNCTION‑FORMED FL OIL SPOUT
PLUS ONE OIL PAN •Reduces engine oil temperature by 10° on an 80° day •Increases capacity by one quart •Constructed of cast A356 T‑6 billet aluminum with silver or black finish •Multiple integral baffles eliminate the stock plastic baffle with springs •Baker +1 pan has the feed located in the rear and the return in the front for a more complete system circulation •Structurally located integral boss for Alloy Art TXR stabilizer •Made in the U.S.A.
•Strong billet construction with a sleek and compact design that won’t interfere with larger‑bodied starters or side covers •Features a screw‑in dipstick to keep the dipstick from popping out like stock dipsticks •Includes polished stainless steel breather line •Available with chrome or black‑anodized finish •Made in the U.S.A.
PART # DESCRIPTION FOR 99‑08 FLT, FLHT, FLHR, FLHX, FLTR 1105‑0027 Silver 1105‑0028 Black FOR 93‑98 FLT, FLHT, FLHR, FLHX, FLTR 1105‑0029 Silver 1105‑0030 Black
PART # DESCRIPTION FOR 02‑06 FLHT, FLHR, FLHX, FLTR 0710‑0088 Chrome 0710‑0092 Black
SUG. RETAIL $499.95 499.95
SUG. RETAIL $325.95 325.95
499.95 499.95
OIL FILLER HOUSING KIT •Chrome die‑cast aluminum housing •Comes complete with fitting, gasket, hardware and rubber hose •Converts 93‑98 breather style to late‑model method of breathing •Uses OEM dipstick PART # 7805‑3032
OIL TANK EDGING TRIM •Replacement‑type, chrome edging trim PART # DS‑310225
DESCRIPTION For 93‑06 FLT, FLHT; repl. OEM #s 62419‑93, 62470‑02
SUG. RETAIL $49.95
DESCRIPTION For 85‑86 FX and FXWG; repl. OEM #62534‑65
SUG. RETAIL $13.95
DS‑350145‑PK
2404‑0032
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
OIL TANK BRACKET SET •Replace the dull front and rear oil tank bracket on your late‑model Softail with these chrome brackets
VIBRATION MOUNTS •For battery boxes, oil tanks or custom parts •Meet or exceed all OEM specifications
NOTE: Rear bracket requires 5/16”‑24 x 5/8” bolts to mount on 93‑99 models. PART # DS‑310255
DESCRIPTION For 84‑99 Softail; trepl. OEM #62704‑84 (rear), 62707‑84 (front)
SUG. RETAIL
PART # 2404‑0032 DS‑350145‑PK
$26.95
DESCRIPTION 5/16”‑18 studs, 1/2” long; repl. OEM #69123‑92 1/4”‑20 threaded studs and steel side plates; for mounting battery boxes and oil tanks (5‑pk.); repl. OEM #62563‑65
SUG. RETAIL $7.95 (ea.)
2.95 (ea.)
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1156
HEAVY‑DUTY VIBRATION MOUNT
TOP OIL TANK BRACKET GROMMET
•Rubber mount with steel studs •Heavy‑duty design has an internal spring for durability under high loads •Sold to dealer in five‑pack, sold to consumer as each PART # 0710‑0084
•Rubber grommet with metal sleeve •Sold each to the consumer; sold to dealers in packs of 10
DESCRIPTION x 1/2” studs; repl. OEM #62563‑65 (5‑pk.)
1/4”‑20
SUG. RETAIL $3.95 (ea.)
PART # DS‑391240
DESCRIPTION Repl. OEM #s 11447 (grommet) and 5775 (sleeve)
All part numbers in BLUE are new for 2013.
SUG. RETAIL $1.95 (ea.)
SECTION DS‑330033
DS‑330039
7805‑3030
OIL PLUG TEMP GAUGE •Sensitive to oil temperatures up to 350°F •Chrome gauge bezel
•Billet aluminum with liquid crystal display •Push‑button readout with automatic shutoff PART # 0710‑0033 7805‑3042 7805‑3030
DESCRIPTION For 00‑13 FXST, FLST For 84‑99 FXST, FLST For 86‑03 XL models
SUG. RETAIL $99.95 99.95 89.95
PART # DS‑330039 DS‑330033 DS‑330031 0710‑0047
WINDSHIELDS & FAIRINGS TOURING
DS‑330031
LCD OIL TEMPERATURE GAUGE
16
AUDIO & COMMUNICATION
0710‑0047
DESCRIPTION For all 00‑13 FXST/FLST models (27/8” L) For 84‑99 FXST, FLST; 84‑94 FXR; 84‑92 FLT; 86‑01 XL (23/4” L) For 85‑86 FXWG (37/8” L) For 04‑13 XL (15/8” L)
SUG. RETAIL $30.95 30.95 30.95 65.95
LUGGAGE SEATS & SISSY BARS
0710‑0121 0710‑0100
EXHAUST CUSTOM OIL DIPSTICKS
0710‑0152
•Exact replacement for OEM dipstick •Three styles available •Includes the swiveling dipstick •Chrome plated with skull, flame or clean “peaked” design caps PART # DESCRIPTION FOR 00‑13 SOFTAIL 0710‑0099 Skull 0710‑0100 Flamed 0710‑0120 Peaked FOR 84‑99 SOFTAIL 0710‑0144 Skull 0710‑0145 Flamed 0710‑0146 Peaked
SUG. RETAIL $42.95 42.95 39.95 45.95 45.95 45.95
PART # DESCRIPTION SUG. FOR 07‑13 FLT, FLHT, FLTR, FLHX AND H‑D FL 0710‑0108 Skull 0710‑0109 Flamed 0710‑0115 Peaked FOR 00‑06 FLT, FLHT, FLTR, FLHX 0710‑0106 Skull 0710‑0107 Flamed 0710‑0121 Peaked
SUG. RETAIL $38.95 27.95
PART # 0710‑0089
Skull Flame Peaked
$42.95 42.95 39.95
Skull Flame Peaked
45.95 45.95 42.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
LIGHTING SUG. RETAIL $16.95
HANDLEBARS, CONTROLS & MIRRORS CABLES
0710‑0077
•Plug cap made from sheets of solid brass, not brass‑plated; drawn and formed and polished to a bright finish •Made in the U.S.A.
BRAKES
DEAD END OIL TANK DIPSTICK/PLUG
DESCRIPTION For 84‑99 FXST/FLST models (11/4” i.d. filler neck)
SUG. RETAIL $23.95
•CNC‑machined from 6061 billet aluminum with a chrome finish •Replaces oil tank dipstick/plug •Comes with dipstick for easy oil level checking •Available in smooth and notched designs •Made in the U.S.A.
TANKS & OIL FILTERS DASHES & GAUGES 0710‑0080
NOTE: Oil must be checked with bike in level position.
0710‑0071
DEAD END OIL TANK PLUGS
SUG. RETAIL
DESCRIPTION Oil tank dipstick; repl. OEM # 62845‑00A
BRASS PUSH‑IN OIL TANK PLUG
PART # 0710‑0147
DESCRIPTION
•Features a 4.375” long swiveling dipstick •1.45” diameter rubber plug body with a 1.75” diameter chrome cap •Fits most 00‑13 Softail style oil tanks
0710‑0002
DESCRIPTION For 91‑98 FXD, 93‑98 FXDWG; repl. OEM #62685‑95A For 93‑98 FLT/FLHT; repl. OEM #s 62640‑93, 62607‑93
42.95 42.95 39.95
PART # FOR 99‑05 FXD 0710‑0148 0710‑0149 0710‑0150 FOR 06‑13 FXD 0710‑0151 0710‑0152 0710‑0153
SOFTAIL OIL TANK DIPSTICK
OIL DIPSTICKS
PART # 0710‑0001 0710‑0002
RETAIL TRIKES $42.95 42.95 42.95
ELECTRICAL
0710‑0001
•Billet machined aluminum with a chrome finish •Caps feature knurled edges to allow a good grip •Plastic dipsticks have all required markings •Come with sealing gaskets
FUEL/AIR SYSTEMS
0710‑0144
PART # DESCRIPTION SUG. RETAIL FOR 00‑13 FXST/FLST 0710‑0077 Notched $49.95
0710‑0068
•CNC‑machined from 6061 billet aluminum, then finished in chrome •Replaces OEM oil plug •Available in smooth or notched style •Made in the U.S.A. PART # DESCRIPTION FOR 84‑99 FXST/FLST MODELS AND CUSTOM APPLICATIONS 1 (1 /4” I.D. FILLER NECK) 0710‑0069 Notched 0710‑0071 Smooth FOR 84‑98 FLT/FLHT MODELS AND CUSTOM APPLICATIONS (17/8” I.D. FILLER NECK) 0710‑0068 Notched 0710‑0070 Smooth
SUG. RETAIL
$51.95 51.95
57.95 57.95
PART # DESCRIPTION SUG. RETAIL FOR 00‑13 FXST/FLST (CONT) 0710‑0080 Smooth $49.95
•Features a 2” billet aluminum cap with a peaked design •Chrome finish with a knurled edge for easy removal •1.3” diameter rubber plug fits most 1.25” i.d. filler necks
All part numbers in BLUE are new for 2013.
DESCRIPTION Peaked
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
CUSTOM OIL TANK PLUG
PART # FOR 84‑99 SOFTAIL 0710‑0116
FRAMES, SUSPENSION & FENDERS
HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $39.95
COVERS, SECURITY & GENERAL
1157
SECTION
16
WINDSHIELDS & FAIRINGS
0710-0140
0710-0141
0710-0142 0710-0143
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST
OIL TANK PLUGS DIPSTICK COVERS
•Billet aluminum •Replaces OEM plug •Available in black •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 00-13 FXST/FLST 0710-0140 Nautical star $94.95
PART # DESCRIPTION SUG. RETAIL FOR 00-13 FXST/FLST (CONT) 0710-0141 Iron cross $94.95
•Made from billet aluminum •Replaces existing cover on existing dipstick •Available in black •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FLHT/FLHR/FLHX/FLTR 0710-0142 Nautical star 0710-0143 Iron cross
SUG. RETAIL $94.95 94.95
0710-0085
0710-0082
FUEL/AIR SYSTEMS 0710-0083
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
0710-0154
DIPSTICK COVERS
0710-0155
DIPSTICK COVERS
•CNC machined from billet aluminum •Replaces the existing cover •Must remove OE cover before installation •Made in the U.S.A. PART # DESCRIPTION FOR 07-11 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE 0710-0082 Gloss black powdercoat, finned 0710-0083 Chrome, finned 0710-0085 Black diamond edge
SUG. RETAIL $49.95 49.95 69.95
•Billet aluminum construction •Replaces the existing cover on the OEM dipstick PART # DESCRIPTION FOR 07-11 FLHT/FLHR/FLTR/FLHX 0710-0154 Chrome 0710-0155 Gloss black re-machined
SUG. RETAIL $27.95 27.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS
DEAD END OIL DIPSTICK COVER •Attaches to the dipstick, replacing the existing cap •CNC-machined 6061 billet aluminum with a chrome finish •Notched design •Made in the U.S.A. PART # 0710-0066
DESCRIPTION For 99-06 FLT, FLHT, FLHX and FLHR models
SUG. RETAIL $36.95
DASHES & GAUGES
ZOMBIE OIL FILLER CAP •Definitely perks up that dull oil filler cap •Chrome-plated, die-cast construction installs easily and is easy to use •Sold each PART # 0710-0139
DESCRIPTION For 93-05 FLHT/FLHR/FLTR/FLHX and 99-05 Dyna
SUG. RETAIL $49.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
EASY-TURN DIPSTICK CAP
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1158
•Cap uses the stock internals of the OEM dipstick •Cap design makes it easy to turn the cap for checking oil levels •Chrome finish •Sold each
PEAKED DIPSTICK ACCENT •Adds a chrome detail to a key area on the bike •Peel-and-stick application •Compatible with Küryakyn transmission shrouds PART # 0710-0157
DESCRIPTION For 07-11 FLHT/FLHR/FLTR/FLHX, 09-11 H-D FL Trikes, 06-11 FXD, 08-11 FXCW/C
SUG. RETAIL $14.95
PART # 1015-0120
DESCRIPTION For 07-11 FLHT/FLHR/FLTR/FLHX, 09-11 H-D FL Trikes, 06-11 Dyna and 08-11 FXCW/C
All part numbers in BLUE are new for 2013.
SUG. RETAIL $24.95
SECTION 0711-0158
0711-0157
DS-245263
CHROME MOTOR CASE BREATHER FITTINGS
OIL LINE FITTING KITS
PART # DESCRIPTION 0711-0157 Black
DS-245200
SUG. RETAIL $29.95
PART # DESCRIPTION 0711-0158 Chrome
DS-245250
DS-245257
TOURING
DS-245260
DS-245274
DS-245261
DS-245278
HOSE AND TANK FITTINGS
LUGGAGE
5.95 10.95
SEATS & SISSY BARS
0711-0117
DS-245276 DS-245272
0711-0118
FUEL/AIR SYSTEMS
•Steel with a black chrome finish •Sold each •Made in the U.S.A. PART # 0711-0116
DS-245270
$4.95
EXHAUST 0711-0117
DS-245258
SUG. RETAIL
0711-0116
DS-245259
DS-245205 DS-245252
AUDIO & COMMUNICATION
DS-245264
PART # DESCRIPTION FOR ALL 84-92 BIG TWIN MODELS DS-245263 Straight 1/4” NPT x 3/8” hose DS-245264 90° 1/4” NPT street elbow (must use w/ PART #DS-245263) DS-245265 45° 1/4” NPT street elbow (must use w/ PART #DS-245263)
SUG. RETAIL $30.95
WINDSHIELDS & FAIRINGS
DS-245265
•Highly polished and plated fittings •Sold each •Made in the U.S.A.
•For installation of AN style custom oil hoses on a Twin Cam B motor •Kit includes two AN -6 adapters for pressure/return hoses, one AN -8 adapter for oil feed hose •For use with Russell Pro Flex stainless hose or Pro Classic black fabric hose •Available in chrome or black anodized finishes for an unsurpassed look •Made in the U.S.A.
16
0711-0118
DESCRIPTION 45° fitting, 1/8” male NPT to 1/8” female NPT Straight Barb fitting, 1/8” male NPT to 3/8” female NPT 90° fitting, 1/8” male NPT to 1/8” female NPT
SUG. RETAIL $16.95 15.95 14.95
HOSE AND TANK FITTINGS
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
•Chrome finish; sold individually •Made in the U.S.A. PART # DS-245200 DS-245205 DS-245250 DS-245252 DS-245256 DS-245257 DS-245278 DS-245258 DS-245259 DS-245260 DS-245270 DS-245272 DS-245274 DS-245261 DS-245276
SUG. DESCRIPTION RETAIL 1 1 45° elbow, /8” male NPT to /8” female NPT, for oil tanks, master cylinder, etc. $6.95 90° elbow, 1/8” male NPT to 1/8” female NPT, for oil tanks, pressure gauges, etc. 4.95 3 1 SAE inverted flare male connector, /16” o.d. tube to male /8” NPT, for H-D brake lines, etc. 3.95 3/8” union, to splice oil lines, cooler installations, etc. 4.95 SAE inverted flare 90° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc. 4.95 SAE inverted flare 45° male elbow, 3/16” o.d. tube to male 1/8” NPT, for H-D brake lines, etc. 6.95 SAE inverted flare female connector, 3/16” o.d. to female 1/8” NPT, for H-D brake lines, etc. 4.95 Male 90° hose connector, 3/8” hose to male 1/8” NPT, for oil tanks, coolers, etc. 8.95 Male 90° hose connector, 5/16” hose to male 1/8” NPT, used on oil tanks, gas tanks, etc. 7.95 1 1 Male 90° hose connector, /4” hose to male /8” NPT, for oil tanks, coolers, etc. 7.95 Male hose connector, 1/4” hose to male 1/8” NPT, for oil tanks, custom fuel tanks, etc. 3.95 5 1 Male hose connector, /16” hose to /8” male NPT, for oil tanks, coolers, etc. 4.95 Male hose connector, 3/8” hose to 1/8” male NPT, for oil tanks, coolers, etc. 5.95 Hex socket plug, 3/8” male NPT, for H-D petcocks, etc. 4.95 Hex socket plug, 1/8” male NPT, for custom petcocks, etc. 3.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
HOSE SPLICERS •Solid brass tubing and hose splicers •Available for 1/4”, 5/16” or 3/8” tubing •Sold each PART # 0706-0195 0706-0196 0706-0197
DESCRIPTION 1/4” 5/16” 3/8”
SUG. RETAIL $6.95 6.95 6.95
CABLES
BRAKES TANKS & OIL FILTERS
0711-0207 600-06 HD0100CH
DASHES & GAUGES
HD4503CH HD0103CH
REUSABLE BUILD YOUR OWN OIL LINES AND -6 COMPONENTS
0711-0204
•Easy-to-assemble high-quality oil lines and fittings •Feature stainless steel braided hose with PTFE inner liner or black textile braided hose •PTFE liner is an inert material, compatible with all oils and hydraulic fluids, has a heat range of -106°C to 260°C (-158°F to 500°F) and shields oil systems from moisture, unlike other materials like nylon •Fittings meet 96-hour salt spray testing and ship complete with sealing ferrule PART # DESCRIPTION STAINLESS STEEL AND CHROME FITTINGS 600-06 -6 stainless steel hose, 12’ HD0100CH Chrome steel tank stub fitting HD0103CH Chrome steel straight 1/8” NPT fittings HD4503CH Chrome steel 45° 1/8” NPT fittings HD9003CH Chrome steel 90° 1/8” NPT fittings HD-WASHER-6 Chrome steel repl. oil line washer kit, 6-pack
SUG. RETAIL $133.95 24.95 24.95 37.95 37.95 8.95
0711-0205
H99003CH
0711-0202
0711-0203
PART # DESCRIPTION BLACK TEXTILE HOSE AND BLACK ANODIZED FITTINGS 0711-0207 -6 textile hose, 3’ 0711-0208 -6 textile hose, 6’ 0711-0206 -6 textile hose, 12’ 0711-0204 Black anodized aluminum -6/straight 1/4” NPT fittings 0711-0205 Black anodized aluminum -6/straight 1/8” NPT fittings 0711-0201 Black anodized aluminum 45° hose end 0711-0202 Black anodized aluminum 90° hose end 0711-0203 Black anodized aluminum -6 straight hose end
All part numbers in BLUE are new for 2013.
SUG. RETAIL $31.95 60.95 118.95 4.95 5.95 22.95 22.95 9.95
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1159
SECTION
16
WINDSHIELDS & FAIRINGS 0711‑0035
TOURING
0711‑0046
AUDIO & COMMUNICATION LUGGAGE
0711‑0063
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS
STAINLESS STEEL BRAIDED OIL LINE KITS
UNIVERSAL STAINLESS STEEL BRAIDED OIL LINES
0711‑0063
•Direct replacements for OEM oil lines •Compression and NPT fittings are chrome‑plated •Replacement washers are sold in 6‑packs •Made in the U.S.A.
PART # DESCRIPTION OIL LINE KITS 0711‑0036 For L92‑99 FXST/FLST models (4‑line kit) 0711‑0035 For 90‑E92 FXST/FLST models (6‑line kit) 0711‑0034 For 87‑89 FXST/FLST models (4‑line kit) 0711‑0042 For 92‑98 Dyna models (3‑line kit) 0711‑0038 For 91‑94 FXR models (5‑line kit) 0711‑0037 For 87‑90 FXR models (4‑line kit) 0711‑0041 For 94‑03 XL models (3‑line kit) 0711‑0040 For 91‑93 XL models (4‑line kit) 0711‑0039 For 86‑90 XL models (5‑line kit) REPLACEMENT WASHER 0711‑0063 For oil lines (6‑pk.)
SUG. RETAIL $126.95 173.95 146.95 112.95 153.95 153.95 112.95 146.95 126.95 .95
ELECTRICAL
•Available in various lengths for any custom application •Include 1/8” NPT chrome compression fittings for easy installation •Measured overall, including fittings •Made in the U.S.A. SUG. PART # 0711‑0043 0711‑0044 0711‑0045 0711‑0046 0711‑0047 0711‑0048 0711‑0049 0711‑0050 0711‑0051
DESCRIPTION 8” 9” 10” 11” 12” 13” 14” 15” 16”
RETAIL $26.95 27.95 27.95 28.95 28.95 25.95 29.95 30.95 31.95
PART # 0711‑0052 0711‑0053 0711‑0054 0711‑0055 0711‑0056 0711‑0057 0711‑0063
DESCRIPTION 17” 18” 20” 22” 24” 26” Repl. seals sold in 6‑pk.
SUG. RETAIL $31.95 32.95 33.95 34.95 35.95 36.95 .95 (ea.)
0711‑0150 0711‑0138
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
UNIVERSAL OIL LINES AND FITTINGS •Stainless steel braid is superior in pressure rating, flame resistance, and volumetric 0711‑0151 expansion to all other materials, including rubber, resulting in unmatched durability •Available in common lengths and match with female fittings to form complete oil line assemblies •Feature stainless steel braided hose with PTFE inner liner and beautifully chromed mild steel hardware •All hardware meets 96‑hour salt spray testing •PTFE liner is an inert material, compatible with all oils and hydraulic fluids and has a heat range of ‑158°F to 500°F; shields oil systems from moisture, unlike other materials like nylon •Made in the U.S.A. NOTE: Oil line lengths are determined by measuring the distance between the flares of the female swivel fittings. OIL LINES
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1160
FITTINGS
SUG. PART # DESCRIPTION RETAIL 0711‑0133 6” $41.95 0711‑0134 7” 41.95 0711‑0135 8” 42.95 0711‑0136 9” 43.95 0711‑0137 10” 43.95 0711‑0138 11” 44.95 0711‑0139 13” 45.95 0711‑0140 14” 46.95
SUG. PART # DESCRIPTION RETAIL 0711‑0141 15” $47.95 0711‑0142 17” 48.95 0711‑0144 19” 50.95 0711‑0145 20” 50.95 0711‑0146 21” 51.95 0711‑0147 24” 53.95 0711‑0148 26” 53.95
PART # 0711‑0149 0711‑0150 0711‑0151 0711‑0152 0711‑0153 0711‑0154
DESCRIPTION Straight 1/8” NPT adapter Straight 1/4” NPT adapter 45° 1/8” NPT adapter 45° 1/4” NPT adapter 90° 1/8” NPT adapter 90° 1/4” NPT adapter
SUG. RETAIL $7.95 7.95 12.95 12.95 12.95 12.95
PRO SYSTEM INDIVIDUAL OIL LINES •Designed for applications when a stock oil line kit won’t work •Feature pre‑assembled, individual 3/8” i.d. braided stainless steel Teflon® oil lines with rubber compression fittings •Fit most standard 3/8” single‑barb oil fittings •Length given is the overall length, including the fittings •Replacement seals for compression fittings available separately •To complete installation use single barb hose tank fittings such as PART #DS‑245274 •Made in the U.S.A. SUG. SUG. PART # DS‑222601 DS‑222602 DS‑222603 DS‑222604 DS‑222605 DS‑222606
LENGTH 8” 9” 10” 11” 12” 13”
RETAIL $30.95 30.95 30.95 31.95 32.95 32.95
PART # DS‑222607 DS‑222608 DS‑222609 DS‑222610 DS‑222611 DS‑222612
LENGTH 14” 15” 16” 17” 18” 20”
RETAIL $33.95 34.95 34.95 34.95 35.95 35.95
PART # DS‑222613 DS‑222614 DS‑222615 0711‑0076 DS‑222616
SUG. LENGTH RETAIL 22” $36.95 24” 38.95 26” 39.95 28” 39.95 Repl. compression fitting seals (12‑pk.) 17.95
All part numbers in BLUE are new for 2013.
OIL LINE HOSE KIT •Oil hose feed kit for Softail bikes •Built with stainless steel hose and crimped on chrome ends •Made in the U.S.A. SUG. PART # 0711‑0081
DESCRIPTION For 00‑10 FXST/ FLST models
RETAIL $56.95
SECTION
16
WINDSHIELDS & FAIRINGS 0711-0123
TOURING
0711-0174 0711-0110
0711-0111
0711-0112
0711-0166
0711-0167
AUDIO & COMMUNICATION LUGGAGE
0711-0168
0711-0170
0711-0121
0711-0115
0711-0114
0711-0113
0711-0119
0711-0171
0711-0120
SEATS & SISSY BARS EXHAUST
0711-0173
0711-0172
UNIVERSAL BRAIDED HOSE AND FITTINGS •Your choice of black fabric braid or traditional stainless steel braided •Pro flex hose features traditional stainless steel braided outer jacket with Russell’s race proven CPE synthetic rubber inner liner •It’s superior construction enhances bend radius yet will not collapse under extreme heat •Ideal for street use or full competition •Pro classic hose utilizes a black nylon fabric outer braid over Russell’s proven SPE synthetic rubber inner liner •This not only looks good, it is light weight and easy to work with •Simplifies routing, cutting and assembly •Has a great bend radius with a max pressure rating of 350 psi •Engineered to work with Russell full flow hose aluminum hose ends in straight 45- and 90° in AN -6 or -8 sizes •Aluminum adapter fittings are available in wide combination angles and pipe thread sizes •Hose ends and adapter fittings are available in two finishes, black anodized and Endura; Endura simulates the appearance of stainless steel UNIVERSAL BRAIDED HOSE DESCRIPTION -6 (11/32” I.D.) 6’ 10’ 20’
PROCLASSIC/BLACK
PROFLEX STAINLESS STEEL
0711-0122 0711-0123 0711-0124
0711-0174 0711-0175 0711-0176
DESCRIPTION -8 (7/16” I.D.) 3’ 6’ 10’
PROCLASSIC/BLACK
PROFLEX STAINLESS STEEL
0711-0186 0711-0187
0711-0184 0711-0185
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
HOSE ENDS DESCRIPTION -6 AN Straight 45° swivel 90° swivel Compression
BLACK ANODIZED
ENDURA
0711-0110 0711-0111 0711-0112 0711-0125
0711-0166 0711-0167 0711-0168 0711-0177
DESCRIPTION -8 AN Straight 45° swivel 90° swivel
BLACK ANODIZED
ENDURA
0711-0181 0711-0182 0711-0183
0711-0178 0711-0179 0711-0180
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
ADAPTER FITTINGS DESCRIPTION -6 AN 1/8”, 45° flare to pipe 1/8”, flare to pipe 1/8”, 90° flare to pipe 1/4”, flare to pipe 1/4”, 90° flare to pipe 1/4”, 45° flare to pipe PART # 0711-0110 0711-0111 0711-0112 0711-0113 0711-0114 0711-0115 0711-0119
SUG. RETAIL $12.95 33.95 34.95 22.95 5.95 13.95 5.95
PART # 0711-0120 0711-0121 0711-0122 0711-0123 0711-0124 0711-0125 0711-0166
BLACK ANODIZED
ENDURA
0711-0113 0711-0114 0711-0115 0711-0119 0711-0120 0711-0121
0711-0194 0711-0169 0711-0170 0711-0171 0711-0172 0711-0173
SUG. RETAIL $14.95 13.95 51.95 80.95 152.95 19.95 14.95
PART # 0711-0167 0711-0168 0711-0169 0711-0170 0711-0171 0711-0172 0711-0173
SUG. RETAIL $23.95 22.95 5.95 14.95 6.95 14.95 14.95
DESCRIPTION -8 AN 3/8”, 45° flare to pipe 3/8”, flare to pipe 3/8”, 90° flare to pipe
PART # 0711-0174 0711-0175 0711-0176 0711-0177 0711-0178 0711-0179 0711-0180
SUG. RETAIL $55.95 94.95 175.95 13.95 15.95 24.95 24.95
PART # 0711-0181 0711-0182 0711-0183 0711-0184 0711-0185 0711-0186 0711-0187
BLACK ANODIZED
ENDURA
0711-0190 0711-0188 0711-0189
0711-0191 -
SUG. RETAIL $14.95 24.95 23.95 33.95 92.95 60.95 98.95
PART # 0711-0188 0711-0190 0711-0191 0711-0194
SUG. RETAIL $7.95 14.95 15.95 22.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
TWIN CAM VENT LINE
WHEELS & AXLES
•Replace unsightly stock crankcase-to-oil tank vent line •High-luster chrome finish •Match other Russell Pro System braided lines •Made in the U.S.A. PART # 1204-0031
DESCRIPTION For 02-06 FLHT, FLHR, FLTR
CRANKCASE VENT LINE
HARDWARE, CHEMICALS & TOOLS
•Highly chromed steel construction •Replaces the rubber OEM crankcase-to-oil tank line •Includes fittings for easy installation •Made in the U.S.A. SUG. RETAIL $64.95
PART # 0711-0032
DESCRIPTION For 02-06 FLT; repl. OEM #45808-02
All part numbers in BLUE are new for 2013.
SUG. RETAIL $49.95
COVERS, SECURITY & GENERAL
1161
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
OIL FILTER MOUNTING BRACKET KITS
0712-0059
•Billet oil filter mounting bracket for Twin Cam engines was specially designed and created for the S&S 124” Twin Cam engines, but makes a great cosmetic and functional upgrade for engines built with stock Twin Cam crankcases as well •No voids or other casting defects in the material to cause leaks •Position of the filter has been shifted slightly to give additional clearance between the filter body and the crankcase for easier filter installation and removal •Also machined to make it easy to install an oil cooler in the pressure-side of the system; if a cooler is not needed, simply install the pipe plugs in the threaded holes in the filter bracket, instead of the hose fittings •Made in the U.S.A.
DS-190781
0932-0082
OIL FILTER/ REGULATOR MOUNTS 0712-0313
PART # DESCRIPTION FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) AND ALL S&S T-SERIES MOTORS 0712-0059 Polished 0712-0312 Chrome FOR 92-99 TWIN CAM AND ALL S&S V-SERIES MOTORS 0712-0313 Polished
SUG. RETAIL $144.95 160.95 217.95
•.250” machined-from-billet plate with oil passageways •Predrilled to accept regulator •Mounts to front motor mount •Comes with mounting hardware and fittings •Accepts oil filters #63782-80A and 63810-80A (sold separately) •Made in the U.S.A. PART # FOR 84-99 FX MODELS DS-190781 0932-0082
DESCRIPTION Chrome Black
SUG. RETAIL $108.95 108.95
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
0712-0317
OFFSET OIL FILTER MOUNT
BILLET OIL FILTER MOUNT •Designed to mount directly to the engine case •Conceals oil lines, clamps and fittings for a clean look •Machined from billet aluminum and chromed to a mirror finish •Fits Evo engines with mounting bosses in the engine case •Comes complete with mounting bolts and fittings to accept 3/8” oil hoses PART # 0712-0038
DESCRIPTION For 92-99 80” Big Twins
HANDLEBARS, CONTROLS & MIRRORS
0712-0318
SUG. RETAIL $232.95
0712-0035
•Sandwich-style mount allows easy hook-up of any style remote oil cooler or additional oil filter set up •1/8” NPT ports (fittings sold separately) •Designed with pressure relief valve rather than standard thermostat; pressure relief valve allows constant oil flow through remote oil cooler with total protection from starving engine from oil flow •Available in chrome or black anodized finish •Made in the U.S.A. PART # DESCRIPTION FOR 99-13 TWIN CAM AND EFI EVOLUTION MODELS 0712-0317 Chrome 0712-0318 Black
SUG. RETAIL $189.95 159.95
CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS
SLIMLINE BILLET OIL FILTER MOUNT •1/2”-thick billet aluminum mount with 3/8” external fittings •Available in chrome or black •Provides a low-cost, slim oil filter mount PART # FOR 92-99 80” BIG TWIN 0712-0035 0712-0368
0712-0368
DESCRIPTION
SUG. RETAIL
Chrome Black
$79.95 79.95
OIL FILTER MOUNTING KIT •6061 billet aluminum construction with a polished finish •Optimized oil passages flow almost 30% more efficiently than others on the market which means less oil pressure drop and cooler temps •Works with any aftermarket oil cooler •Made in the U.S.A. PART # 0712-0269
DESCRIPTION For 99-06 Twin Cam “A” motors (except 06 Dyna)
SUG. RETAIL $169.95
FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1162
CHROME OIL FILTER MOUNT
CUSTOM OIL FILTER MOUNT
•Designed to replace the OEM cast mount •Includes oil filter adapter •Mounts with OEM hardware •11/16” threads accept OEM hard lines
•Chrome filter mount features 3/8” fittings and may be used with stainless steel or rubber lines •Accepts all types of oil filters PART # DS-275104
DESCRIPTION For 92-99 80” Evolution Big Twin models
SUG. RETAIL $39.95
PART # DS-275107
All part numbers in BLUE are new for 2013.
DESCRIPTION For all 92-99 Big Twin Evolution; repl. OEM #26378-92A/26381-92A
SUG. RETAIL $49.95
SECTION 1902‑0024
WINDSHIELDS & FAIRINGS
OIL FILTER COVERS •6061 T‑6 aluminum construction •Slides over OEM and most aftermarket Twin Cam or Evolution oil filters •Held in place by a setscrew •Made in the U.S.A. PART # 0712‑0377 0712‑0378
OIL LINE COVER/ TRANSMISSION SHROUD 0712‑0377
0712‑0378
DESCRIPTION Chrome Black
SUG. RETAIL $189.95 189.95
TOURING
•Oil lines disappear under a luscious layer of chrome •Also covers the rough‑cast area around the transmission •Easy installation PART # DS‑305020 1902‑0024 DS‑305021
AUDIO & COMMUNICATION
DESCRIPTION For 99‑05 FXD For 02‑06 FLT For 99‑01 FLHR, 00‑01 FLT
SUG. RETAIL $49.95 99.95 69.95
LUGGAGE SEATS & SISSY BARS
OIL LINE NACELLE COVER •Die‑cast chrome cover dresses up the area between the cam cover and transmission •Stock chrome oil lines exit through the cover for a high‑tech appearance PART # 0940‑0495
16
EXHAUST
DELUXE OIL LINE NACELLE COVER
DESCRIPTION For 00‑06 FXST/FLST models
SUG. RETAIL $69.95
•Blankets the area between the cam cover and the transmission •Covers the oil lines and the exposed clutch cable where it enters the transmission cover •Easily installed PART # 0711‑0155
FUEL/AIR SYSTEMS
DESCRIPTION For 07‑13 FXST/FLST
0711‑0058
SUG. RETAIL $79.95
ENGINE TRANSMISSION & DRIVELINE
0711‑0200
GASKETS & SEALS OIL HOSE COVER •Brighten an unfinished area on stock bikes •Die‑cast aluminum with a beautiful chrome finish •Includes mounting hardware PART # 0940‑0439
ELECTRICAL
DESCRIPTION For 99‑06 FLHT/FLHR/FLTR; repl. OEM #37946‑99
SUG. RETAIL $39.95
OIL LINE COVERS •Chrome covers hide that plain rubber oil line beneath the right side of your oil tank PART # 0711‑0058 0711‑0200
DESCRIPTION For 00‑06 FXST/FLST models For 00‑13 FXST/FLST (except FXCW/C)
SUG. RETAIL $39.95 39.95
CHROME BILLET ALUMINUM OIL DRAIN •Unique drain mounts cleanly and easily to the rear of the transmission mounting plate •Utilizes existing OEM hardware (mounting bolt and hose clamp) •Works on stock bikes as well as those running wide tires with offset transmissions •Includes barbed oil line fitting and hex drive pipe plug •Made in the U.S.A. PART # DS‑310241
DESCRIPTION For 86‑99 FXST/FLST models
SUG. RETAIL $42.95
0712‑0291 0712‑0290
OIL FILTER MAGNETS •Easy to install – just attach to base of standard oil filter •Standard oil filters only trap particles down to 20 microns, leaving the most harmful 5 to 20 micron particles to circulate through your engine •Powerful six‑point magnet traps harmful, abrasive hard metal particles down to one micron that regular filters don’t •Must‑have item during engine break‑in •Invented by Dave Ashley and Dan Smith, winners of 17 Baja Off‑road Championships, to help their race engines last through the extreme abuse of Baja racing •Reduces wear and significantly increases engine life •Available in sizes to fit most spin‑on or cartridge oil filters •Reusable for up to five oil filter changes •Sold each PART # 0712‑0291 0712‑0290
DESCRIPTION 3/4” 1”
SUG. RETAIL $11.95 11.95
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
NO‑PAIN OIL DRAINS •Specially modified quick‑release coupling makes oil changes a snap •Simply attach the drain hose to the special coupler, drain the oil, remove the hose from the coupler and refill the tank •No more oily mess or fumbling with a hose plug •DS‑310245 installs in‑line on the OEM drain hose on 89‑99 FXST/FLST and 91‑94 FXR models •Made in the U.S.A. by Custom Cycle Engineering PART # DS‑310245
DESCRIPTION In‑line oil drain for 89‑99 FXST/FLST and 91‑94 FXR
SUG. RETAIL $85.95
•Polished ceramic‑coated magnets •Two mini magnets designed for smaller motorcycle filters •No restriction in oil flow •SAE‑tested engine safe •Rated to a temperature of 842°F (450°C) •Removes a majority of wear particulates down to .5 microns •Improves engine efficiency •Sold in pairs
All part numbers in BLUE are new for 2013.
DESCRIPTION Magna‑Guard filter magnets
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
OIL FILTER MAGNETS
PART # 0712‑0139
TANKS & OIL FILTERS
SUG. RETAIL $7.95
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1163
SECTION
16
WINDSHIELDS & FAIRINGS TOURING DS‑275203
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST
DS‑275109
0712‑0021
DS‑275108
0712‑0011
SPIN‑ON OIL FILTERS •High‑quality spin‑on filters are a dependable replacement for most H‑D models •Available in chrome and black versions •Filters with nut include a 17mm hex nut on the end of the filter for easy installation/removal
0712‑0012 0712‑0023
DESCRIPTION For 99‑13 Twin Cam models; repl. OEM #63798‑99 For 84‑98 FLT; 84‑94 FXR; 84‑99 FXST, FLST; 86‑13 XL, 09‑12 XR1200/X; repl. OEM #s 63796‑77A, 63806‑83 and 63805‑80A For 91‑98 Dyna Glide; repl. OEM #63813‑90 For 02‑13 V‑Rod; repl. OEM #63793‑01K For 85‑86 FX, FXWG; repl. OEM #s 63782‑80A and 63810‑80
FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
DS‑275119
0712‑0019
2005‑1400
BLACK DS‑275109
SUG. RETAIL $8.95
BLACK WITH NUT 0712‑0021
SUG. RETAIL $9.95
DS‑275204 DS‑275119 2005‑1400 DS‑275206
7.45 8.95 9.95 7.95
0712‑0019 0712‑0023 0712‑0022 0712‑0132
9.95 9.95 9.95 9.95
DS‑275206
CHROME DS‑275108
SUG. RETAIL $10.95
CHROME WITH NUT 0712‑0011
SUG. RETAIL $12.95
DS‑275203 DS‑275118 ‑ DS‑275205
10.95 10.95 ‑ 10.95
0712‑0009 0712‑0012 ‑ 0712‑0018
12.95 12.95 ‑ 12.95
DS‑275188
0712‑0007
MAGNETIC RING OIL FILTERS •High‑quality chrome spin‑on‑style oil filters •Magnetic filters are designed with a magnetic ring in center to capture small particles of loose metal and come with pressure relief valves •Some filters come with a 17mm nut on the end of the filter for easy installation/removal
0712‑0008
APPLICATION For 99‑13 Twin Cam; repl. OEM #63798‑99 (31/4”) For 91‑98 FXD; repl. OEM #63813‑90 (51/2”) For 84‑98 FXST/FLST, 84‑99 FLT, 86‑13 XL, 09‑12 XR1200/X, 84‑94 FXR; repl. OEM #s 63796‑77A, 63806‑83, 63805‑80A (31/4”) For 85‑86 FX; repl. OEM #s 63782‑80, 63810‑80 (21/4”)
0712‑0006
CHROME DS‑275188 DS‑275127
SUG. RETAIL $13.95 13.95
DS‑275126 DS‑275125
12.95 12.95
CHROME WITH NUT 0712‑0008 0712‑0007
SUG. RETAIL $14.95 14.95
0712‑0004 0712‑0006
14.95 14.95
OIL FILTERS LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES
•Sturdy steel canister houses the finest filtering media and internal components available •Canister is slightly smaller in diameter than stock filters to make them easier to remove and install •Designed with a direct bypass valve that routes bypass oil directly to the filter exit, which minimizes the amount of contaminants carried to the engine in the unfiltered bypass oil •The nominal particle capture size is smaller than that of stock filters while the resistance to oil flow is nearly the same •Available in black or chrome finish •Made in the U.S.A. PART # FOR 99‑13 TWIN CAM 0712‑0101 0712‑0102
SUG. RETAIL
Black Chrome
$11.95 14.95
0712‑0102
PART # FOR 84‑99 BIG TWIN 0712‑0099 0712‑0100
DESCRIPTION
SUG. RETAIL
Black Chrome
$11.95 14.95
K&N WRENCH OFF OIL FILTERS •K&N delivers a Race‑Spec oil filter which is built with a synthetic media specifically designed to withstand the high concentrates of synthetic racing oils •Synthetic filter media provides outstanding filtration at high‑flow rates •Built to racing specifications •17mm hex nut allows easy‑on/easy wrench‑off •Predrilled for safety wire security •Protected by a heavy‑duty canister and a double‑rolled base plate •Check‑valve/anti‑drain back valve prevents drain‑back and dry starts; where applicable •Prelubed base gasket for optimum seal •TÜV production monitored and endorsed ensures the highest quality filters available DESCRIPTION For 99‑13 Twin Cam (anti‑drain back valve) For 91‑98 Dyna Glide (anti‑drain back valve) For 84‑98 FLT, 84‑94 FXR, 84‑99 Softail, 86‑13 XL, 09‑12 XR1200/X, all 94‑02 Buell models (exc. Blast) For 03‑13 V‑Rod (anti‑drain back valve) For 85‑86 FX 4‑speed For 02‑09 Buell Blast 500 (all), 04‑09 Firebolt XB12R 1200, 03‑09 Firebolt XB9R 900, 03‑09 Lightning/CityX XB9S/SX 900, 04‑09 Lightning XB12S/SCG 1200 For 09 Buell 1125 R/CR
HARDWARE, CHEMICALS & TOOLS
PRICE LIST
COVERS, SECURITY & GENERAL
PART # 0712‑0045 0712‑0354
1164
DESCRIPTION
0712‑0101
SUG. RETAIL $13.95 13.95
PART # KN‑170 KN‑170C
SUG. RETAIL $13.95 15.95
PART # KN‑171B KN‑171C
SUG. RETAIL $13.95 17.95
REPLACES OEM # 63798‑99, 63731‑99 63812‑90, 63813‑90 63796‑77A, 63805‑80A 63793‑01K 63782‑80, 63810‑80A
BLACK KN‑171B ‑ KN‑170 ‑ ‑
CHROME KN‑171C KN‑173C KN‑170C KN‑174C KN‑172C
6380600Y Q10641AM
0712‑0045 0712‑0354
‑ ‑
PART # KN‑172C KN‑173C
All part numbers in BLUE are new for 2013.
SUG. RETAIL $13.95 16.95
PART # KN‑174C
SUG. RETAIL $15.95
SECTION EMGO OIL FILTERS
WINDSHIELDS & FAIRINGS
•Only the highest quality paper, metal and rubber are used to manufacture these top-grade filters •Bonded with extra strong epoxy (polyvinyl acetate) for long life •Clean oil makes engines last longer DESCRIPTION
EMGO BLACK
EMGO CHROME
91-98 Dyna Glide; repl. OEM #63812-90, 63813-90 84-98 FLT, 84-94 FXR, 84-99 FXST/FLST, 86-13 XL, 09-12 XR1200; all 94-02 Buell models (exc. Blast); repl. OEM #63731-99/A, 63781-72R, 63796-77/A, 63798-99/A, 63805-80/A, 63806-83 85-86 FX 4-speed; repl. OEM #63782-80, 63810-80A
10-82430 10-82410
10-82420 10-82400
10-07700
10-824401 10-07800
1
TOURING PART #
SUG. RETAIL
10-07700 10-07800 10-82400
Micro-Tech filter.
$5.95 6.95 8.95
PART #
SUG. RETAIL
10-82410 10-82420
PART #
$6.95 10.95
SUG. RETAIL
10-82430 10-82440
$8.95 11.95
HIFLOFILTRO® OIL FILTERS
AUDIO & COMMUNICATION LUGGAGE
•The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963 •With the experience of more than five decades, constant research and development and featuring a completely modern production facility Hiflofiltro offers some of the best quality filters in the world •TÜV approved and production monitored to ensure OEM or better quality •Constructed using the best materials available HF171B •One of the broadest ranges of aftermarket coverage
SEATS & SISSY BARS HF172C
FITS MODEL
REPLACES OEM #
BLACK
For 99-13 Twin Cam models (anti-drain back valve)
63798-99, 63731-99
HF171B
For 91-98 Dyna Glide
63812-90, 63813-90
-
For 84-90 FLT, 84-94 FXR, 84-99 Softail, 86-13 XL, 09-12 XR1200
63796-77A, 63805-80A HF170B
For 85-86 FX 4-speed
63782-80, 63810-80A
-
For 97-02 Cyclone M2, 94-02 Lightning S1/X1, 02 White Lightning X1W, 94-02 Thunderbolt S2/S2T/S3/S3T
63805-80A
HF170B
For 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/Buell Lightning XB12S For 09 Buell 1125R/CR
63806-00Y
0712-0044
7.80
-
-
-
0712-02131
9.95
-
-
For 02-13 V-Rod
-
-
1
16
SUG. RETAIL $7.05
CHROME
SUG. RETAIL
HF171C
$9.35
-
HF173C
12.30
7.05
HF170C
9.50
-
HF172C
9.35
7.05
HF170C
9.50
-
HF174C
9.35
EXHAUST FUEL/AIR SYSTEMS ENGINE
Drop-in cartridge filter.
TRANSMISSION & DRIVELINE
OIL FILTERS •High-quality filters are made to strict specifications to provide superior performance •Micron rating of 10 traps microscopic dirt particles without restricting oil flow •Include all necessary O-rings or gaskets •Available for spin-on applications
PH6019
PH6022
0712-0369
PH6068
PRICE LIST
FITS MODEL
REPLACES OEM #
BLACK
CHROME
PART #
For 99-13 Twin Cam (anti-drain back valve) For 91-98 Dyna Glide For 85-86 FX 4-speed For 00-09 Buell Blast, 03-09 Buell Firebolt XB9R/Buell Lightning XB9S, 04-09 Buell Firebolt XB12R/Buell Lightning XB12S, 06-07 Ulysses XB12X
63798-99, 63731-99 63812-90, 63813-90 63782-80, 63810-80A
PH6022 -
0712-0369 PH6068 PH6019
63806-00Y
PH4967
-
PH4967 PH6019 PH6022 PH6068 0712-0369
GASKETS & SEALS PH4967 SUG. RETAIL $9.00 14.60 10.30 19.60 13.40
•Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases •Stainless filter catches items down to 35 microns, which is about three times better than most good paper or brass filters •Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees 0712-0219 0712-0351 •Filters maintain consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine •Anti-drain back valves are not required for this filter •Features black or polished billet aluminum housing •Should be the last filter an owner ever needs; this high tech filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the Aerospace industry where filtration is of the utmost importance •Clean the element, spring and housing with solvent, kerosene, contact/brake cleaner or any degreasing agent, even common dish soap and water; see LUBES section for options (do not clean with gasoline) PART #
SUG. RETAIL
0712-0219 0712-0219 0712-0219
$119.95 119.95 119.95
0712-0219
119.95
0712-0351 0712-0351 0712-0351
119.95 119.95 119.95
0712-0351
119.95
DESCRIPTION ALUMINUM For 99-13 Twin Cam (all) For 91-98 Dyna Glide For 84-98 FLT, 84-99 Softail, 86-13 XL, 09-13 XR1200 For Buell 97-02 MC Cyclone, 95-02 S3 Thunderbolt, 96-02 X1 Lightning REPLACEMENT COMPONENTS Oil filter sealing ring for PART #s 0712-0389, 0712-0351, 0712-0219
BRAKES TANKS & OIL FILTERS
SUG. RETAIL
0712-0389 0712-0389 0712-0389
$119.95 119.95 119.95
0712-0389
119.95
0935-0463
1.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
HARDWARE, CHEMICALS & TOOLS
•Exact replacement filter for the Fueling Oil filter and Oil cooler combination •Includes O-ring DESCRIPTION For Feuling Oil Filter/Oil Cooler
CABLES
WHEELS & AXLES
REPLACEMENT FILTER FOR FUELING OIL FILTER/OIL COOLER COMBINATIONS PART # 0712-0103
PART #
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
FLO STAINLESS STEEL, REUSABLE “SPIN ON” OIL FILTER
DESCRIPTION POLISHED For 99-13 Twin Cam (all) For 91-98 Dyna Glide For 84-98 FLT, 84-99 Softail, 86-13 XL, 09-12 XR1200 For Buell 97-02 MC Cyclone, 95-02 S3 Thunderbolt, 96-02 X1 Lightning BLACK For 99-13 Twin Cam (all) For 91-98 Dyna Glide For 84-98 FLT, 84-99 Softail, 86-13 XL, 09-13 XR1200 For Buell 97-02 MC Cyclone, 95-02 S3 Thunderbolt, 96-02 X1 Lightning
ELECTRICAL
SUG. RETAIL $22.95
All part numbers in BLUE are new for 2013.
COVERS, SECURITY & GENERAL
1165
SECTION
16
WINDSHIELDS & FAIRINGS TOURING
1901‑0418
AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES
FORCEFLOW CYLINDER HEAD COOLERS •The perfect solution for those hot running Twin Cam Touring bikes •The only cooling system made for Twin Cam Touring bikes that consistently reduces operating temperatures up to 100 degrees •High‑tech, waterproof cooling fan pushes air around cylinders and cylinder heads •Included temperature switch automatically turns the Force Flow on at 140 degrees •At higher speeds air is directed in through side scoop and around cylinder head and cylinder •Includes built‑in quality OEM‑type replacement horn •Easy plug and play installation with no drilling •Includes Force Flow assembly with high‑powered fan, horn, temperature switch, manual override switch, wiring, hardware and complete instructions •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM TOURING MODELS 1901‑0418 Polished $480.95
1901‑0419
PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM TOURING MODELS (CONT) 1901‑0419 Black $420.95
PART # DESCRIPTION SUG. RETAIL FOR 99‑13 TWIN CAM TOURING MODELS (CONT) 1901‑0420 Silver $420.95
LOW‑MOUNT FAN‑ASSISTED OIL COOLER KITS •Feature the Jagg high‑performance 10‑row oil cooler kit with an integrated fan •Designed to perform as well at low vehicle speeds and stop‑and‑go traffic as on the open highway •Kits include cooler, sealed‑motor fan, oil hose, mounting hardware, automatic thermal fan switch and wiring harness to allow simple bolt‑on application with use of a Jagg offset oil filter adapter (sold separately) •Fan turns on automatically at approximately 205°F •Fan pulls a full 150 cfm of air across cooler •HyperFlow technology ensures unsurpassed flow and heat rejection •Made in the U.S.A. NOTE: Will require the use of Jagg offset filter adapter (PART #J4600 or 0713‑0031) to access oil supply. NOTE: Filter adapter nipple (PART #0713‑0081) is required on bikes that have OEM coolers already installed and are upgrading to a fan assisted oil cooler.
0713‑0079 0713‑0081 PART # 0713‑0080 0713‑0079 0713‑0081
DESCRIPTION For 09‑13 FLHT/FLHX/FLHR/FLTR and FL Trike models For 99‑08 FLHT/FLHX/FLHR/FLTR and FL Trike models Filter adapter nipple
SUG. RETAIL $379.95 379.95 9.95
TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1166
WIDELINE OIL COOLER KITS •Aluminum construction with durable powder‑coated finish •10‑tube, two‑pass design offers significantly more cooling surface than the closest competitor •Extreme performance in a compact package; the WideLine’s special in‑line turbulators add to the cooler’s efficiency with minimal oil pressure loss or restriction •Specifically designed to exceed the cooling demands of the modern V‑Twin motorcycle •Kits integrate a chrome or black channel along the outer edge of the cooler to complement your engine •Mount to the left frame down‑tube, spaced away from the frame to allow airflow to both the oil cooler 0713‑0097 and the engine’s cylinders PART # •Mount to the frame using unique, FOR 84‑99 SOFTAIL, 91‑13 FXD/FXDWG, 84‑99 highly‑durable, Uralite mounts, which 0713‑0097 have a shock absorbing effect and 0713‑0098 clean styling
0713‑0098 DESCRIPTION SUG. RETAIL FXR, 09‑13 FLHT/FLHR/FLHX/FLTR (W/O OEM OIL COOLERS) Black $249.95 Chrome 279.95
All part numbers in BLUE are new for 2013.
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 0713-0003
LUGGAGE SEATS & SISSY BARS 0713-0002
EXHAUST
0713-0029
FUEL/AIR SYSTEMS
0713-0059
ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING
0713-0005
OIL COOLERS HANDLEBARS, CONTROLS & MIRRORS
Installation time measured in minutes Extra riding time measured in years •Cooler oil makes engines last longer – simple as that! •Jagg oil coolers feature cutting-edge technology to keep your engine cool under the most punishing conditions •And because they’re designed to look as good as they perform, they’ll perfectly complement your bike’s style •Hoses and clamps are included with oil cooler kits
CABLES
Engineered to perform
BRAKES
•Multipass oil flow configuration ensures the oil’s utilization of the entire oil cooler •Specially designed turbulators in each oil passageway gently stir oil, exposing it to more critical heat dissipation surface area for superior cooling with minimal oil pressure restriction •Highly concentrated mini-louvered air fins allow maximum heat transfer •Made in the U.S.A.
0713-0025
TANKS & OIL FILTERS 0713-0007
DASHES & GAUGES
NOTE: Vertical oil coolers do not fit touring models with lower fairings. NOTE: Ten-row coolers are recommended for 95” and larger motors. NOTE: Will require the use of oil filter adapters to access oil supply (sold separately). 6-ROW VERTICAL-MOUNT OIL COOLERS DESCRIPTION For 84-13 FXS/FXST/FLST/FLS For 91-13 FXD/FXDWG For 84-13 FLHT/FLHR/FLTR/FLHX w/o OEM oil cooler For 84-99 FXR For 86-13 XL 10-ROW INLINE VERTICAL-MOUNT OIL COOLERS DESCRIPTION For 00-13 FXST/FLST/FXS/FLS For 84-13 FLHT/FLHR/FLTR w/o OEM oil cooler
DELUXE 0713-0002 0713-0002 0713-0002 0713-0002 0713-0002
SUG. RETAIL $259.95 259.95 259.95 259.95 259.95
SLIMLINE 0713-0003 0713-0003 0713-0003 0713-0003 0713-0003
SUG. RETAIL $209.95 209.95 209.95 209.95 209.95
CHROME 0713-0005 0713-0005 0713-0005 0713-0005 0713-0005
SUG. RETAIL $299.95 299.95 299.95 299.95 299.95
BLACK 0713-0029 0713-0030
SUG. RETAIL $239.95 239.95
CHROME 0713-0058 0713-0059
SUG. RETAIL $289.95 289.95
BLACK 0713-00251 J1270
SUG. RETAIL $209.95 209.95
CHROME 0713-0007
SUG. RETAIL $249.95
6-ROW HORIZONTAL LOW-MOUNT OIL COOLERS DESCRIPTION For 00-13 FXS/FXST/FLST/FLS For 84-08 FLHT/FLHR/FLTR/FLHX 1
OIL COOLERS continued on next page
Not for ABS models.
All part numbers in BLUE are new for 2013.
FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1167
SECTION
16
WINDSHIELDS & FAIRINGS
OIL COOLERS (CONT)
TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS
0713-0064
0713-0054
0713-0065
0713-0066
EXHAUST FUEL/AIR SYSTEMS 0713-0063
ENGINE
J1390
10-ROW HORIZONTAL LOW-MOUNT OIL COOLERS
TRANSMISSION & DRIVELINE
DESCRIPTION For 91-13 FXD/FXDWG For 84-08 FLHT/FLHR/FLTR/FLHX For 09-13 FLHT/FLHR/FLTR/FLHX w/o OEM oil cooler
BLACK 0713-0064 0713-0054 0713-0066
SUG. RETAIL $249.95 249.95 249.95
CHROME SUG. RETAIL 0713-0065 $279.95 0713-0063 279.95 -
GASKETS & SEALS ELECTRICAL
6-ROW HORIZONTAL HIGH-MOUNT OIL COOLER DESCRIPTION BLACK SUG. RETAIL For 96-02 Buell J1390 $299.95
J4600 Back
J4400 Front
J4600 Front
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1168
0713-0031 Front
J4400 Back 0713-0031 Back
OIL COOLER ADAPTERS •Allow quick-and-easy access to oil supply for any oil cooler installation •Advanced design allows hot oil to go through the oil filter before it is 0713-0048 routed through the oil cooler, resulting in less overall restriction and pressure drop 0713-0050 0713-0049 •PART #0713-0031 features an integrated automatic thermostatic actuator to ensure rapid engine warm-up •Anti-rotation kits (sold separately) ensure that the oil filter adapters PART #S J4600 and 0713-0031 cannot rotate during oil filter removal •PART #0713-0050 upgrade nut is designed to replace the stock threaded oil filter mounting stem on applications where stem is too long, to ensure proper oil flow characteristics when installing adapter PART #J4400 •Made in the U.S.A. PART # J4400
J4600 0713-0031
DESCRIPTION Adapter for all H-D models w/ front-mounted spin-on filters (except fuel-injected Evolution and all Twin Cam models) Off-set adapter for fuel-injected Evolution and all Twin Cam models Off-set adapter w/ automatic thermostat for fuel-injected Evolution and all Twin Cam models
CLAMPS •For mounting Jagg’s universal oil coolers, custom oil coolers and many other applications •Sold each •Made in the U.S.A. PART # 0713-0013 0713-0014 0713-0015 0713-0016 0713-0017
DESCRIPTION For 1” dia. frames For 11/8” dia. frames For 11/4” dia. frames For 13/8” dia. frames For 11/2” dia. frames
SUG. RETAIL
PART # 4600GK
$89.95
0713-0048
109.95
0713-0049
149.95
0713-0050
DESCRIPTION Service kit (repl. gasket) for oil filter adapter PART #s J4600 and 0713-0031 Off-set anti-rotation kit for adapter PART #s J4600 and 0713-0031, Twin Cam A models Off-set anti-rotation kit for adapter PART #s J4600 and 0713-0031, Twin Cam B models J4400 oil filter adapter upgrade nut for S&S motors
AUTOMATIC OIL COOLER BY-PASS VALVE
SUG. RETAIL $6.95 6.95 6.95 6.95 6.95
DESCRIPTION Automatic by-pass valve
$9.95 9.95 9.95 16.95
OIL COOLER BYPASS VALVE
•Valve acts as an automatic thermostat allowing you to by-pass the cooler for cold weather riding or faster warm ups on cool days •Works with all oil coolers •Durable anodized billet aluminum construction •Compact in-line installation •Includes all necessary hardware and easy-to-follow installation instructions PART # 0713-0069
SUG. RETAIL
•Bypass valve J4000B works in conjunction with all oil coolers as a manual version of a thermostat •Compact design blends into the oil lines, offering a less cluttered appearance •Made in the U.S.A. SUG. RETAIL $89.95
All part numbers in BLUE are new for 2013.
PART # J4000B
DESCRIPTION By-pass valve for all oil coolers
SUG. RETAIL $69.95
SECTION
16
WINDSHIELDS & FAIRINGS TOURING
OIL COOLER KITS •CNC‑machined from billet aluminum 0713‑0056 with a chrome plated or black finish •Kits mount to frame tubes with supplied clamps and reducers •Available with or without a temperature gauge •Comes with AN #6 fittings (use with ‑6 lines found in most speed shops) •If using standard 3/8” hose, use breather fittings PART #DS‑245263 (sold separately) •Measures 12” L x 2.25” diameter •Replacement clamps available separately PART # DESCRIPTION FOR 1” TO 11/4” FRAME TUBES DS‑310204 Oil cooler, chrome 0713‑0073 Oil cooler, black 0713‑0052 Oil cooler w/ temp gauge, chrome 0713‑0075 Oil cooler w/ temp gauge, black 0713‑0056 Replacement clamp, chrome 0713‑0076 Replacement clamp, black
SUG. RETAIL $219.95 219.95 259.95 259.95 49.95 49.95
AUDIO & COMMUNICATION
0713‑0072
LUGGAGE
0713‑0051 PART # DESCRIPTION FOR 11/2” FRAME TUBES 0713‑0019 Oil cooler, chrome 0713‑0072 Oil cooler, black 0713‑0051 Oil cooler w/ temp gauge, chrome 0713‑0074 Oil cooler w/ temp gauge, black 0713‑0057 Replacement clamp, chrome 0713‑0077 Replacement clamp, black
SUG. RETAIL $219.95 219.95 259.95 259.95 49.95 49.95
SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE
TUBE OIL COOLERS
TRANSMISSION & DRIVELINE
•Available in chrome, black with polished fins or all‑black styles •Coolers mount to the front down tube of the frame •Twin Cam applications require an adapter to provide easy access to the oil supply (sold separately) •Cooler includes required mounting hardware; hose clamps and oil line must be purchased separately (uses 3/8” i.d. oil line) •Measures approximately 101/2” long with a 1” diameter •Made in the U.S.A.
GASKETS & SEALS 0713‑0068
PART # DESCRIPTION SUG. RETAIL FOR 06‑13 FXD, 09‑13 FLHT, FLHR, FLHX AND FLTR (11/2” CLAMPS) 0713‑0068 Chrome $397.95
0713‑0067
PART # DESCRIPTION SUG. RETAIL FOR 06‑13 FXD, 09‑13 FLHT, FLHR, FLHX AND FLTR (11/2” CLAMPS) (CONT) 0713‑0067 Black $397.95
ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES
OIL COOLER COVER •Chrome cover is lightweight ABS with a chrome finish •Installs just like the stock black factory cover PART # 0713‑0078
OIL COOLER COVER
DESCRIPTION For 11‑13 FLHRC, FLHTK, FLTRU, FLHTCUSE, FLTRUSE, FLHXSE and 11‑13 H‑D Trikes w/ OEM oil cooler
SUG. RETAIL $59.95
BRAKES
•Quality black vinyl cover features hook‑and‑loop fasteners for easy installation and removal •Keeps oil at the correct operating temperature when riding in cool weather •Designed for use on OEM and Jagg Slimline oil cooler •8” L x 21/4” W x 11/4” D •Made in the U.S.A. PART # 3511‑0001
DESCRIPTION Oil cooler cover
TANKS & OIL FILTERS
SUG. RETAIL $14.95
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
BLACK OIL COOLER HOSE KIT •Includes 3’ of Russell Pro Classic black cloth braided hose and four Russell black anodized compression hose fittings •A clean, no clamp installation on smooth barb oil cooler and filter adapters is provided by the fittings •Gives you the perfect finishing touch to a durable cooler installation •Made in the U.S.A. PART # 0711‑0156
DESCRIPTION Oil cooler hose kit
SUG. RETAIL $92.95
WHEELS & AXLES
UNIVERSAL FUEL/OIL LINE •Universal, black fuel/oil line in 25’ rolls •Reinforced line is fuel‑ and oil‑resistant NOTE: Not to be used with fuel over 10% alcohol. PART # 0711‑0060 0711‑0061 0711‑0062
All part numbers in BLUE are new for 2013.
DESCRIPTION x 25’ 5/16” x 25’ 3/8” x 25’ 1/4”
SUG. RETAIL $28.95 35.95 44.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1169
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL
LIGHTING HANDLEBARS, CONTROLS & MIRRORS
FUEL/OIL LINES
0711-0195
•Reinforced, synthetic rubber, smoothbore line is fuel- and oil-resistant •Made in the U.S.A. NOTE: Not to be used with fuel over 10% alcohol. PART # 0706-0150 0706-0151 0711-0195
DESCRIPTION 1/4” x 3’ L 5/16” x 3’ L 3/8” x 8’ L
0706-0150
SUG. RETAIL $15.95 15.95 21.95
PART # 0711-0196 DS-06226
0711-0196
0706-0151 DESCRIPTION 1/2” x 2’ roll (for oil tank drains) 3/8” x 25’ roll
BLUE POLYURETHANE FUEL LINE
SUG. RETAIL $13.95 44.95
NOTE: Not to be used with fuel over 10% alcohol.
NOTE: Not to be used with fuel over 10% alcohol. DESCRIPTION 1/16” i.d. x 25’ 1/16” i.d. x 100’ 1/8” i.d. x 25’ 1/8” i.d. x 100’ 3/16” i.d. x 25’
SUG. RETAIL $4.95 14.95 6.95 24.95 14.95
PART # 0706-0110 0706-0106 0706-0111 0706-0107 0706-0112
DESCRIPTION 3/16” i.d. x 100’ 1/4” i.d. x 25’ 1/4” i.d. x 100’ 5/16” i.d. x 25’ 5/16” i.d. x 100’
SUG. RETAIL $49.95 17.95 61.95 21.95 84.95
PART # DESCRIPTION FUEL LINE, 3’ 1/4”, clear M6219 1/4”, black M62191 3/16”, clear M6209 3/16”, black M62091 5/16”, clear 0706-0113
LP (LOW PERMEATION) FUEL LINES
FUEL LINES FOR FUEL-INJECTION MODELS
BRAKES
PART # 2’ LENGTH 0706-0184 0706-0186
i.d. i.d.
5/16”
DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES
DESCRIPTION 3/16”
i.d. i.d. 5/16” i.d. 3/8” i.d. 1/4”
SUG. RETAIL $6.95 8.95 8.95
LP (LOW PERMEATION) PREMIUM FUEL LINE
SUG. RETAIL $12.95 12.95
PART # 25’ LENGTH 0706-0185 0706-0187
DESCRIPTION 1/4”
i.d. i.d.
SUG. RETAIL $92.95 106.95
5/16”
FUEL LINES FOR CARB MODELS PART # 2’ LENGTH 0706-0176 0706-0177 0706-0178 0706-0179
$6.95 6.95 6.95 6.95 6.95
PART # DESCRIPTION FUEL LINE, 3’ (CONT) 5/16 “, black 0706-0114 CARB VENT LINE, 5’ 1/8”, clear M6109 1/8”, black M61091
0706-0206
NOTE: Carb line is not for use on pressure lines on fuel injection systems or cooling system applications. DESCRIPTION
SUG. RETAIL
0706-0135
•Patented five-layer Greenshield™ barrier technology keeps fuel out of the environment while delivering peak fuel efficiency •Heat, oil, ozone and abrasion-resistant cover •Sold in 25’ rolls and 2’ lengths •Approved for use with leaded and unleaded gasoline, diesel, E-85, methanol, ethanol and gasohol fuels •Carb line meets SAE, EPA and C.A.R.B. requirements for low-permeation fuel lines •Carb line can be used with standard worm gear and crimp-style clamps •CARB-approved fuel-injection line is recommended for any fuel injection applications
1/4”
SUG. RETAIL $42.95 41.95
•This quality-made fuel line will not harden or crack •Fuel line is made of premium polyurethane •Available in 1/4”, 3/16”, and 5/16” i.d.; carburetor vent line available in 1/8” i.d. •Fuel line available in 3’ lengths •Carb vent line comes in 5’ lengths •Choice of clear or black •Made in the U.S.A.
•High-quality, kink- and abrasion-resistant, transparent blue polyurethane line with exceptional chemical resistance including gasoline, grease and oil •Strong, yet flexible and easily processed in assembly operations •High tensile strength; withstands temperatures from -65°F to 220°F without deterioration
PART # 0706-0103 0706-0108 0706-0104 0706-0109 0706-0105
DESCRIPTION 5/16” x 25’ roll 1/4” x 25’ roll
FUEL AND CARBURETOR VENT LINE
CABLES
TANKS & OIL FILTERS
PART # DS-05226 DS-04226
DS-05226
SUG. RETAIL $5.95 5.95 6.95 7.95
PART # 25’ LENGTH 0706-0180 0706-0181 0706-0182 0706-0183
DESCRIPTION 3/16”
i.d. i.d. 5/16” i.d. 3/8” i.d. 1/4”
SUG. RETAIL $55.95 64.95 69.95 53.95
•Meets the 2008 C.A.R.B. and EPA fuel line permeation standards for motorcycles, ATV, snowmobiles, PWC and small engines •Flexible and kink-resistant PART # 1/4” I.D. 0706-0204 0706-0135 0706-0206 5/16” I.D. 0706-0088 0706-0205 0706-0136 0706-0207
DESCRIPTION
SUG. RETAIL
Yellow, 3’ L Gray, 25’ L Yellow, 25’ L
$18.95 114.95 122.95
Gray, 3’ L Yellow, 3’ L Gray, 25’ L Yellow, 25’ L
17.95 19.95 125.95 125.95
PREMIUM FUEL LINE •Stronger and more durable than vinyl fuel line •Use with any type of gasoline •Resists swelling and hardening •Resistant to direct sunlight, hardening and/or cracking •Flexible in temperatures from -35F to +165°F •Fuel line stretches easily over fittings or petcocks •Sold in 3’ lengths and 25’ rolls NOTE: Not for use with fuel-injected models.
WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1170
PART # DESCRIPTION SUG. RETAIL 1/8” I.D. – 3’ LENGTH 0706-0138 Clear $10.95 3/16” I.D. X 5/16” O.D. – 3’ LENGTHS 0706-0038 Gray 12.95 0706-0041 Clear 12.95 0706-0044 Black 12.95 1/4” I.D. X 7/16” O.D. – 3’ LENGTHS 0706-0039 Gray 18.95 0706-0042 Clear 18.95
PART # DESCRIPTION SUG. RETAIL 1/4” I.D. X 7/16” O.D. – 3’ LENGTHS (CONT) 0706-0045 Black $18.95 5/16” X 1/2” O.D. – 3’ LENGTHS 0706-0040 Gray 19.95 0706-0043 Clear 19.95 0706-0046 Black 19.95 1/8” I.D. – 25’ ROLL 0706-0139 Clear 64.95
PART # DESCRIPTION SUG. RETAIL 3/16” I.D. X 5/16” O.D. – 25’ ROLLS MP12-031 Gray $67.95 0706-0018 Black 77.95 0706-0021 Clear 77.95 1/4” I.D. X 7/16” O.D. – 25’ ROLLS MP12-032 Gray 111.95 0706-0019 Black 122.95 0706-0022 Clear 128.95
All part numbers in BLUE are new for 2013.
PART # 5/16” X 1/2” MP12-033 0706-0020 0706-0023
DESCRIPTION SUG. RETAIL O.D. – 25’ ROLLS Gray $119.95 Black 137.95 Clear 137.95
SECTION
16
WINDSHIELDS & FAIRINGS DS‑096612
TOURING STAINLESS STEEL BRAIDED HOSE •Available in 3’, 6’ or 25’ lengths, stainless steel braided hoses can be used for any oil and gas applications •Available in natural/silver color
AUDIO & COMMUNICATION
NOTE: Not to be used with fuel over 10% alcohol. PART # DS‑096605 DS‑096615 DS‑096612 DS‑096606 DS‑096616
DESCRIPTION 1/4” x 3’ 1/4” x 6’ 1/4” x 25’ 5/16” x 3’ 5/16” x 6’
SUG. RETAIL $21.95 41.95 146.95 24.95 45.95
PART # DS‑096613 DS‑096607 DS‑096617 DS‑096614
DESCRIPTION 5/16” x 25’ 3/8” x 3’ 3/8” x 6’ 3/8” x 25’
SUG. RETAIL $167.95 26.95 49.95 189.95
LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS
BLACK BRAIDED HOSE •Hose features a black nylon braided covering •Suitable for either gas or oil applications •Available in various sizes and lengths
ENGINE
NOTE: Not to be used with fuel over 10% alcohol. PART # DS‑096671 DS‑096672 DS‑096673
DESCRIPTION x 6’ 5/16” x 6’ 3/8” x 6’
SUG. RETAIL $41.95 45.95 49.95
1/4”
PART # DS‑096676 DS‑096677
DESCRIPTION 3/8” x 25’ 1/2” x 3’ (For oil tank drains)
SUG. RETAIL $189.95 29.95
TRANSMISSION & DRIVELINE
BRAIDED STAINLESS AND COPPER HOSES
GASKETS & SEALS
•25’ rolls of braided stainless steel or braided copper hoses for various OEM and custom applications •Made in the U.S.A.
ELECTRICAL Stainless
NOTE: Not to be used with fuel over 10% alcohol.
Copper
PART # DESCRIPTION BRAIDED STAINLESS STEEL HOSE 1/4” i.d. 0711‑0104 5/16” i.d. 0711‑0105 3/8” i.d. 0711‑0106
SUG. RETAIL $121.95 123.95 125.95
PART # BRAIDED COPPER HOSE 0711‑0107 0711‑0108 0711‑0109
DESCRIPTION 1/4”
i.d. i.d. 3/8” i.d.
LIGHTING SUG. RETAIL $101.95 103.95 106.95
5/16”
STAINLESS STEEL BRAIDED FUEL/OIL HOSE
CABLES
•An economical single braid hose for use with hose finishers or common hose clamps •Compatible for fuel and oil applications •For use with Goodridge hose finishers (sold separately; see page 1172) PART # 1/4” HOSE 0711‑0090 0711‑0091
DESCRIPTION
SUG. RETAIL
6’ 10’
HANDLEBARS, CONTROLS & MIRRORS
$45.95 69.95
PART # 5/16” HOSE 0711‑0093 0711‑0094 0711‑0095
DESCRIPTION
BRAKES SUG. RETAIL
6’ 10’ 25’
$46.95 76.95 182.95
PART # 3/8” HOSE 0711‑0096 0711‑0097 0711‑0098
DESCRIPTION 6’ 10’ 25’
SUG. RETAIL $46.95 78.95 186.95
TANKS & OIL FILTERS DASHES & GAUGES
1902‑0033
FRAMES, SUSPENSION & FENDERS
HIGH‑PRESSURE TUBING •Premium clear polyurethane tubing •85 durometer •Provides superior abrasion, kink, tear, oxidation and chemical resistance •Melting temperature 370°F •Operating temperature 75°‑155°F •Very strong, yet remains flexible •Includes a strong nylon inner band •Pressure tested up to 200 PSI
HOSE PROTECTORS
0706‑0189
NOTE: Not to be used with fuel over 10% alcohol. PART # 0706‑0189 0706‑0190 0706‑0191 0706‑0192 0706‑0193 0706‑0194
DESCRIPTION 1/4” I.D. x 3/8” O.D. x 3’ 1/4” I.D. x 3/8” O.D. x 25’ 5/16” I.D. x .473” O.D. x 3’ 5/16” I.D. x .473” O.D. x 25’ 3/8” I.D. x 9/16” O.D. x 3’ 3/8” I.D. x 9/16” O.D. x 25’
SUG. RETAIL $9.95 69.95 9.95 72.95 10.95 76.95
1902‑0031
FOOTRESTS & LICENSE PLATE FRAMES
•Protect vulnerable and exposed hoses from heat and abrasion •Protectors like this are showing up on more and more OEM applications •Sizes for fuel and radiator hoses •10” L •Made from stainless spring steel •Sold individually •Made in the U.S.A. PART # 1902‑0033 1902‑0032 1902‑0031 1902‑0030
DESCRIPTION 9mm i.d. (fits 1/4” fuel line) 11mm i.d. (fits 7/16” o.d. fuel line) 25mm i.d. (fits 1” o.d. radiator hose) 38mm i.d. (fits 11/2” o.d. radiator hose)
All part numbers in BLUE are new for 2013.
WHEELS & AXLES
SUG. RETAIL $9.95 9.95 10.95 10.95
HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1171
SECTION
16
WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION
GROOVED CHROME HOSE ENDS WITH CLAMPS
FINISHERS •Available in chrome‑plated or black, red or blue •Constructed of anodized aluminum with stainless steel gear drive clamp •Made in the U.K.
•Grooved hose end clamps give a finished look to rubber or braided oil/gas lines •Sold to dealers in 6‑pack PART #
DESCRIPTION
DS‑096608
5
DS‑096609
1
SUG. RETAIL
3
/16”, /8” hose ends
$4.95 (ea.)
/4” hose ends
4.95 (ea.)
Black
COLORED HOSE CLAMPS LUGGAGE SEATS & SISSY BARS EXHAUST
DESCRIPTION
SUG. RETAIL
FOR 1/4” AND 5/16” FUEL LINE
GASKETS & SEALS
1
936‑04DCH
1
936‑07DB
5
0706‑0047
Black
0706‑0049 0706‑0051 0706‑0053
$4.95
/4” chrome /16” , /8” blue
BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL
1172
4.95
PART #
DESCRIPTION
936‑07DCH
5
936‑07DR
5
3
SUG. RETAIL 4.95
0711‑0161
5
3
5.95
/16”, 3/8” chrome
$4.95
/16”, /8” red /16”, /8” black
DESCRIPTION
Silver SUG. RETAIL
FOR 3/8” OIL LINE $36.95
STAINLESS STEEL MINI‑CLAMPS •Designed for use on oil and gas lines up to 3/8” in diameter •Made in the U.S.A.; sold in packs of ten
$36.95
0706‑0048
Black
Copper
43.95
0706‑0050
Copper
43.95
Silver
36.95
0706‑0052
Silver
36.95
PART #
DESCRIPTION
Brass
36.95
0706‑0054
Brass
36.95
DS‑2152
Mini hose clamps
SUG. RETAIL $1.95 (ea.)
WIRE CLAMPS •Self‑tensioning wire hose clamps for fuel or vacuum lines •Made of zinc‑plated, spring tempered music wire •Quality plated steel for long‑lasting durability and function •15‑piece assortment pack offers five each of 1/4”, 5/16” and 7/16” i.d. clamps •150‑piece assortment pack offers 50 of each size •Made in the U.S.A.
5/16”‑3/8” HOSE CLAMPS •Stainless steel with a black finish •Sold in 10‑pk. PART #
DESCRIPTION
0713‑0055
Universal hose clamps
SUG. RETAIL $12.95
PART #
DESCRIPTION
M30040
15‑pc.
SUG. RETAIL $7.95
PART #
DESCRIPTION
M30041
150‑pc.
2401‑0559
SUG. RETAIL $23.95
2402‑0132
STEPLESS® EAR CLAMP KIT FOR FUEL SYSTEM
MP12‑034
LIGHTING
CABLES
4.95
3
ELECTRICAL
HANDLEBARS, CONTROLS & MIRRORS
SUG. RETAIL
/4” blue
Copper
PART #
ENGINE TRANSMISSION & DRIVELINE
DESCRIPTION
936‑04DB
•Custom colored hose clamps designed for use with braided copper and stainless steel hoses, and fit over most manufacturer’s braided rubber hoses •Extruded from brass and finished Brass with a matte metallic powder‑coat •Sold in packs of six – an average FXST or custom bike will use a minimum of six oil line clamps and two fuel line clamps •Made in the U.S.A. PART #
FUEL/AIR SYSTEMS
PART #
FUEL LINE FITTINGS KIT
•Convenient kit includes 70 pieces of hardware, a Motion Pro Side Jaw Pincer tool, and a convenient fuel line clamp size chart •Narrow 5mm wide band provides concentrated seal compression •360° Stepless® design with no gaps on inner surface •Specially formed strip edges reduce the risk of damage to the part being clamped •Lightweight design •Tampering is visible •Kit includes 10 each of the clamps listed below in a convenient storage box •Individual clamp sizes available separately in 10‑pack for restocking
•Contains a wide selection of Y and T fittings, hose clamps, O‑clips and O‑clip front jaw pincher tool •Sizes from 3/16”‑3/8” •Includes 40 assorted O‑clips, 40 assorted Y‑connectors, 40 assorted T‑connectors, hose clamps •Includes ABS storage case •Replacements available in packs of 10 are listed below •Ideal for the shop or home mechanic •Made in the U.S.A.
2402‑0132 Fuel system stepless clamp kit
$109.95
2401‑0557 Stepless clamps, 7.8‑9.5mm (fit Motion Pro Premium and clear vinyl 3/16” i.d. fuel line) (10‑pk.)
.90 (ea.)
PART #
DESCRIPTION
2401‑0716 Stepless clamps, 9.6‑11.13mm (fit Motion Pro Premium and clear vinyl 3/16” i.d. fuel line) (10‑pk.) .80 (ea.)
MP12‑034
Fuel line fitting kit
2401‑0390
5
3 1
SUG. RETAIL $358.95
/16” O‑clips for /16” hose (10‑pk.)
2401‑0095
7
2401‑0096
1
2401‑0391
9
3801‑0034
O‑clip pincher tool
/16” O‑clips for /4” hose (10‑pk.) /2” O‑clips for 5/16” hose (10‑pk.) 3
/16” O‑clips for /8” hose (10‑pk.)
1.40 (ea.) .90 (ea.)
PART #
DESCRIPTION
SUG. RETAIL
2401‑0558 Stepless clamps, 10.3‑12.8mm (fit Motion Pro Premium 1/4” i.d. fuel line) (10‑pk.)
.90 (ea.)
2401‑0559 Stepless clamps, 10.8‑13.3mm (fit Motion Pro clear vinyl 1/4” i.d. fuel line) (10‑pk.)
.90 (ea.)
5
2401‑0560 Stepless clamps, 12.0‑14.5mm (fit Motion Pro Premium and clear vinyl /16” i.d. fuel line) (10‑pk.) .90 (ea.)
1.30 (ea.)
2401‑0717 Stepless clamps, 13.2‑15.7mm (10‑pk.)
1.00 (ea.)
2401‑0561 Stepless clamps, 14.8‑18.0mm (fit Motion Pro Premium and clear vinyl 3/8” i.d. fuel line) (10‑pk.) .90 (ea.)
19.95
.80 (ea.)
3801‑0182 Side jaw clamp pincer
27.95
OIL AND FUEL LINE CLAMP/SPLICE KIT •Heavy‑duty forged crimping tool can be used from end or side and works in tight places •Includes the following: 30 each of 1/4”, 5/16” and 3/8” i.d. hose clamps; one 1/2” i.d. clamp for oil drain hose on late model bikes; five each of special 1/4”, 5/16” and ten 3/8” stainless steel splice connectors •1/4”, 3/8” and 1/2” clamps are conventional one‑ear style •1/4”, 5/16” and 3/8” clamps are Stepless® style for a full 360° closure around hose with no gaps
0706‑0118
0706‑0119
0706‑0120
FUEL LINE CLAMPS
DS‑390307
Repl. /16” Stepless heavy‑duty clamp, .580” i.d. (100‑pk.)
.85
DS‑390308
Repl. 3/8” Stepless® heavy‑duty clamp, .656” i.d. (100‑pk.); repl. OEM #10080
.85
•Replacement clamps used when servicing the fuel pump and filter fuel lines on EFI models •Stainless steel with one‑ear Stepless style for a full 360° of closure around hose without any gaps •Sold in 100‑pks. •Made in the U.S.A.
DS‑390309
Repl. 1/4” one‑ear conventional clamp, .520” i.d. (100‑pk.); repl. OEM #10014
.55
PART #
DESCRIPTION
DS‑390310
Repl. 3/8” one‑ear conventional clamp, .675” i.d. (100‑pk.); repl. OEM #10020A
.55
0706‑0118
11.3mm; i.d repl. OEM #10222
$1.50
DS‑390311
Repl. 1/2” one‑ear conventional clamp, .827” i.d. (100‑pk.); repl. OEM #10086
.55
0706‑0119
12.3mm; i.d repl. OEM #10304
1.50
DS‑390312
Side‑ or end‑type clamp crimper tool (ea.)
60.95
0706‑0120
50mm; i.d repl. OEM #10303
1.95
PART #
DESCRIPTION
DS‑390302
Clamp/hose splice kit w/ crimper tool (ea.)
DS‑390306
Repl. 1/4” Stepless® heavy‑duty clamp, .555” i.d. (100‑pk.); repl. OEM #10014A 5
SUG. RETAIL $297.95
®
.85
All part numbers in BLUE are new for 2013.
SUG. RETAIL (ea.)
Commander un accessoire ou une pièce chez US Dream Import Vous avez vu une pièce ou un accessoire : -1) Notez [Nom du catalogue] [Page du catalogue] [Référence article] et [Nom de l'article (en anglais ou en français)], -2) Envoyez-moi un E-Mail avec ces informations à info@usdream.fr en précisant dans l'objet : "Date + Devis + [Référence article] + [Nom de l'article (en anglais ou en français)] et éventuellement votre numéro de téléphone de contact" Un E-Mail vous sera adressé sous 24 h avec la disponibilité de l'article, le prix(*) livré chez vous et un lien de paiement direct, Vous n'avez plus qu'à procéder au règlement et la commande de votre accessoire sera effectuée immédiatement,
Et votre Accessoire sera chez vous dans 6 jours ! (*) Le prix du devis peut être inférieur au prix que vous avez vu, Exemple : votre accessoire est vendu 157,99 USD sur un eBook et est disponible à 103,99 USD sur un autre FlipBook de US Dream Import - Le devis envoyé sera toujours au meilleur prix disponible ! (*) Par un procédé de croisement des références disponibles, Pour information les prix indiqués sur les catalogues US sont toujours HT et compte tenu des frais de transport par avion, pour 103,99 USD sur un catalogue US vous payerez environ le même montant HT, soit 105,00 Euros (HT) + TVA (20%) + Tarif poste en France,
US Dream Import spécialiste importation de pièces et accessoires
USA Import en direct des USA depuis 1992
Contents Bibliotheque FlipBook Drag Specialties FatBook 2013 Drag Specialties FatBook 2013 Update
Accessoires et Pièces Harley-Davidson Importés par US Dream Import en France Site : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr
Windshields.........................................................6-48.. Touring...............................................................49-86 Audio.................................................................87-122... luggAge..........................................................123-195.... seATs.&.sissybArs.........................................196-334.... exhAusT...........................................................335-476..... Fuel/Air.sysTems..........................................477-555..... engine.............................................................556-629.... TrAnsmission.&.driveline..........................630-714... gAskeTs.&.seAls.............................................715-742..... elecTricAl......................................................743-813..... lighTing...........................................................814-897.... hAndlebArs,conTrols.&.mirrors.........898-1003.... cAbles.........................................................1004-1055.... brAkes.........................................................1056-1128..... TAnks.&.oil.FilTers...................................1129-1172...... dAshes.&.gAuges......................................1173-1206...... FrAmes,.suspension.&.Fenders...........1207-1285.... FooTresTs.&.license.plATe.FrAmes.....1286-1352.... Wheels.&.Axles.........................................1353-1383. hArdWAre,.chemicAls.&.Tools.............1384-1504 covers,.securiTy.&.generAl.................1505-1560...... cross.reFerence.chArT........................1561-1578... Quick.reFerence.chArT.........................1579-1581.... index............................................................1582-1618
NOUVEAU : Special Up Date 2013 FatBook Drag Specialties Harley-Davidson
CLIQUEZ ICI Pièces et Accessoires dédié Harley-Davidson Importés par US Dream Import en France
NOTE:
for your tire needs please see our all-new
TIRE CATALOG. It’s packed with all the tires, tubes, tools and accessories from the industry’s top vendors. We’ve pulled it all out of our other catalogs and dedicated an entire catalog to nothing but tires. No more switching between catalogs — THE TIRE CATALOG HAS IT ALL.
DASHES & GAUGES
17
1173